URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [nog_patch_62/] [or1ksim/] [depcomp] - Blame information for rev 1765

Details | Compare with Previous | View Log


#! /bin/sh
 
# depcomp - compile a program generating dependencies as side-effects
# Copyright 1999, 2000 Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
 
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
# 02111-1307, USA.
 
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
 
# Originally written by Alexandre Oliva .
 
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
  echo "depcomp: Variables source, object and depmode must be set" 1>&2
  exit 1
fi
# `libtool' can also be set to `yes' or `no'.
 
if test -z "$depfile"; then
   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
   dir=`echo "$object" | sed 's,/.*$,/,'`
   if test "$dir" = "$object"; then
      dir=
   fi
   # FIXME: should be _deps on DOS.
   depfile="$dir.deps/$base"
fi
 
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
 
rm -f "$tmpdepfile"
 
# Some modes work just like other modes, but use different flags.  We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write.  Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
  # HP compiler uses -M and no extra arg.
  gccflag=-M
  depmode=gcc
fi
 
if test "$depmode" = dashXmstdout; then
   # This is just like dashmstdout with a different argument.
   dashmflag=-xM
   depmode=dashmstdout
fi
 
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff.  Hmm.
  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  mv "$tmpdepfile" "$depfile"
  ;;
 
gcc)
## There are various ways to get dependency output from gcc.  Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
##   up in a subdir.  Having to rename by hand is ugly.
##   (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
##   -MM, not -M (despite what the docs say).
## - Using -M directly means running the compiler twice (even worse
##   than renaming).
  if test -z "$gccflag"; then
    gccflag=-MD,
  fi
  "$@" -Wp,"$gccflag$tmpdepfile"
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
## The second -e expression handles DOS-style file names with drive letters.
  sed -e 's/^[^:]*: / /' \
      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the `deleted header file' problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header).  We avoid this by adding
## dummy dependencies for each header file.  Too bad gcc doesn't do
## this for us directly.
  tr ' ' '
' < "$tmpdepfile" |
## Some versions of gcc put a space before the `:'.  On the theory
## that the space means something, we add a space to the output as
## well.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
hp)
  # This case exists only to let depend.m4 do its work.  It works by
  # looking at the text of this script.  This case will never be run,
  # since it is checked for above.
  exit 1
  ;;
 
sgi)
  if test "$libtool" = yes; then
    "$@" "-Wp,-MDupdate,$tmpdepfile"
  else
    "$@" -MDupdate "$tmpdepfile"
  fi
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
  rm -f "$depfile"
 
  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
    echo "$object : \\" > "$depfile"
 
    # Clip off the initial element (the dependent).  Don't try to be
    # clever and replace this with sed code, as IRIX sed won't handle
    # lines with more than a fixed number of characters (4096 in
    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
    # the IRIX cc adds comments like `#:fec' to the end of the
    # dependency line.
    tr ' ' '
' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
    tr '
' ' ' >> $depfile
    echo >> $depfile
 
    # The second pass generates a dummy entry for each header file.
    tr ' ' '
' < "$tmpdepfile" \
   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
   >> $depfile
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 
aix)
  # The C for AIX Compiler uses -M and outputs the dependencies
  # in a .u file.  This file always lives in the current directory.
  # Also, the AIX compiler puts `$object:' at the start of each line;
  # $object doesn't have directory information.
  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
  tmpdepfile="$stripped.u"
  outname="$stripped.o"
  if test "$libtool" = yes; then
    "$@" -Wc,-M
  else
    "$@" -M
  fi
 
  stat=$?
  if test $stat -eq 0; then :
  else
    rm -f "$tmpdepfile"
    exit $stat
  fi
 
  if test -f "$tmpdepfile"; then
    # Each line is of the form `foo.o: dependent.h'.
    # Do two passes, one to just change these to
    # `$object: dependent.h' and one to simply `dependent.h:'.
    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
  else
    # The sourcefile does not contain any dependencies, so just
    # store a dummy comment line, to avoid errors with the Makefile
    # "include basename.Plo" scheme.
    echo "#dummy" > "$depfile"
  fi
  rm -f "$tmpdepfile"
  ;;
 
tru64)
   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
   # dependencies in `foo.d' instead, so we check for that too.
   # Subdirectories are respected.
 
   base=`echo "$object" | sed -e 's/\.o$/.d/' -e 's/\.lo$/.d/'`
   tmpdepfile1="$base.o.d"
   tmpdepfile2="$base.d"
   if test "$libtool" = yes; then
      "$@" -Wc,-MD
   else
      "$@" -MD
   fi
 
   stat=$?
   if test $stat -eq 0; then :
   else
      rm -f "$tmpdepfile1" "$tmpdepfile2"
      exit $stat
   fi
 
   if test -f "$tmpdepfile1"; then
      tmpdepfile="$tmpdepfile1"
   else
      tmpdepfile="$tmpdepfile2"
   fi
   if test -f "$tmpdepfile"; then
      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
      # That's a space and a tab in the [].
      sed -e 's,^.*\.[a-z]*:[   ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
   else
      echo "#dummy" > "$depfile"
   fi
   rm -f "$tmpdepfile"
   ;;
 
#nosideeffect)
  # This comment above is used by automake to tell side-effect
  # dependency tracking mechanisms from slower ones.
 
dashmstdout)
  # Important note: in order to support this mode, a compiler *must*
  # always write the proprocessed file to stdout, regardless of -o,
  # because we must use -o when running libtool.
  test -z "$dashmflag" && dashmflag=-M
  ( IFS=" "
    case " $* " in
    *" --mode=compile "*) # this is libtool, let us make it quiet
      for arg
      do # cycle over the arguments
        case "$arg" in
        "--mode=compile")
          # insert --quiet before "--mode=compile"
          set fnord "$@" --quiet
          shift # fnord
          ;;
        esac
        set fnord "$@" "$arg"
        shift # fnord
        shift # "$arg"
      done
      ;;
    esac
    "$@" $dashmflag | sed 's:^[^:]*\:[  ]*:'"$object"'\: :' > "$tmpdepfile"
  ) &
  proc=$!
  "$@"
  stat=$?
  wait "$proc"
  if test "$stat" != 0; then exit $stat; fi
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  tr ' ' '
' < "$tmpdepfile" | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
dashXmstdout)
  # This case only exists to satisfy depend.m4.  It is never actually
  # run, as this mode is specially recognized in the preamble.
  exit 1
  ;;
 
makedepend)
  # X makedepend
  (
    shift
    cleared=no
    for arg in "$@"; do
      case $cleared in no)
        set ""; shift
        cleared=yes
      esac
      case "$arg" in
        -D*|-I*)
          set fnord "$@" "$arg"; shift;;
        -*)
          ;;
        *)
          set fnord "$@" "$arg"; shift;;
      esac
    done
    obj_suffix="`echo $object | sed 's/^.*\././'`"
    touch "$tmpdepfile"
    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
  ) &
  proc=$!
  "$@"
  stat=$?
  wait "$proc"
  if test "$stat" != 0; then exit $stat; fi
  rm -f "$depfile"
  cat < "$tmpdepfile" > "$depfile"
  sed '1,2d' "$tmpdepfile" | tr ' ' '
' | \
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly.  Breaking it into two sed invocations is a workaround.
    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile" "$tmpdepfile".bak
  ;;
 
cpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the proprocessed file to stdout, regardless of -o,
  # because we must use -o when running libtool.
  ( IFS=" "
    case " $* " in
    *" --mode=compile "*)
      for arg
      do # cycle over the arguments
        case $arg in
        "--mode=compile")
          # insert --quiet before "--mode=compile"
          set fnord "$@" --quiet
          shift # fnord
          ;;
        esac
        set fnord "$@" "$arg"
        shift # fnord
        shift # "$arg"
      done
      ;;
    esac
    "$@" -E |
    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
    sed '$ s: \\$::' > "$tmpdepfile"
  ) &
  proc=$!
  "$@"
  stat=$?
  wait "$proc"
  if test "$stat" != 0; then exit $stat; fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  cat < "$tmpdepfile" >> "$depfile"
  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
msvisualcpp)
  # Important note: in order to support this mode, a compiler *must*
  # always write the proprocessed file to stdout, regardless of -o,
  # because we must use -o when running libtool.
  ( IFS=" "
    case " $* " in
    *" --mode=compile "*)
      for arg
      do # cycle over the arguments
        case $arg in
        "--mode=compile")
          # insert --quiet before "--mode=compile"
          set fnord "$@" --quiet
          shift # fnord
          ;;
        esac
        set fnord "$@" "$arg"
        shift # fnord
        shift # "$arg"
      done
      ;;
    esac
    for arg
    do
      case "$arg" in
      "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
        set fnord "$@"
        shift
        shift
        ;;
      *)
        set fnord "$@" "$arg"
        shift
        shift
        ;;
      esac
    done
    "$@" -E |
    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
  ) &
  proc=$!
  "$@"
  stat=$?
  wait "$proc"
  if test "$stat" != 0; then exit $stat; fi
  rm -f "$depfile"
  echo "$object : \\" > "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::    \1 \\:p' >> "$depfile"
  echo "        " >> "$depfile"
  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
  rm -f "$tmpdepfile"
  ;;
 
none)
  exec "$@"
  ;;
 
*)
  echo "Unknown depmode $depmode" 1>&2
  exit 1
  ;;
esac
 
exit 0

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [tags/] [nog_patch_62/] [or1ksim/] [depcomp] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	1250	lampret	`#! /bin/sh`
2
3			`# depcomp - compile a program generating dependencies as side-effects`
4			`# Copyright 1999, 2000 Free Software Foundation, Inc.`
5
6			`# This program is free software; you can redistribute it and/or modify`
7			`# it under the terms of the GNU General Public License as published by`
8			`# the Free Software Foundation; either version 2, or (at your option)`
9			`# any later version.`
10
11			`# This program is distributed in the hope that it will be useful,`
12			`# but WITHOUT ANY WARRANTY; without even the implied warranty of`
13			`# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
14			`# GNU General Public License for more details.`
15
16			`# You should have received a copy of the GNU General Public License`
17			`# along with this program; if not, write to the Free Software`
18			`# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA`
19			`# 02111-1307, USA.`
20
21			`# As a special exception to the GNU General Public License, if you`
22			`# distribute this file as part of a program that contains a`
23			`# configuration script generated by Autoconf, you may include it under`
24			`# the same distribution terms that you use for the rest of that program.`
25
26			`# Originally written by Alexandre Oliva .`
27
28			`if test -z "$depmode" \|\| test -z "$source" \|\| test -z "$object"; then`
29			`echo "depcomp: Variables source, object and depmode must be set" 1>&2`
30			`exit 1`
31			`fi`
32			# `libtool' can also be set to `yes' or `no'.
33
34			`if test -z "$depfile"; then`
35			base=`echo "$object" \| sed -e 's,^./,,' -e 's,\.\([^.]\)$,.P\1,'`
36			dir=`echo "$object" \| sed 's,/.*$,/,'`
37			`if test "$dir" = "$object"; then`
38			`dir=`
39			`fi`
40			`# FIXME: should be _deps on DOS.`
41			`depfile="$dir.deps/$base"`
42			`fi`
43
44			tmpdepfile=${tmpdepfile-`echo "$depfile" \| sed 's/\.\([^.]*\)$/.T\1/'`}
45
46			`rm -f "$tmpdepfile"`
47
48			`# Some modes work just like other modes, but use different flags. We`
49			`# parameterize here, but still list the modes in the big case below,`
50			`# to make depend.m4 easier to write. Note that we cannot use a case`
51			`# here, because this file can only contain one case statement.`
52			`if test "$depmode" = hp; then`
53			`# HP compiler uses -M and no extra arg.`
54			`gccflag=-M`
55			`depmode=gcc`
56			`fi`
57
58			`if test "$depmode" = dashXmstdout; then`
59			`# This is just like dashmstdout with a different argument.`
60			`dashmflag=-xM`
61			`depmode=dashmstdout`
62			`fi`
63
64			`case "$depmode" in`
65			`gcc3)`
66			`## gcc 3 implements dependency tracking that does exactly what`
67			`## we want. Yay! Note: for some reason libtool 1.4 doesn't like`
68			`## it if -MD -MP comes after the -MF stuff. Hmm.`
69			`"$@" -MT "$object" -MD -MP -MF "$tmpdepfile"`
70			`stat=$?`
71			`if test $stat -eq 0; then :`
72			`else`
73			`rm -f "$tmpdepfile"`
74			`exit $stat`
75			`fi`
76			`mv "$tmpdepfile" "$depfile"`
77			`;;`
78
79			`gcc)`
80			`## There are various ways to get dependency output from gcc. Here's`
81			`## why we pick this rather obscure method:`
82			`## - Don't want to use -MD because we'd like the dependencies to end`
83			`## up in a subdir. Having to rename by hand is ugly.`
84			`## (We might end up doing this anyway to support other compilers.)`
85			`## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like`
86			`## -MM, not -M (despite what the docs say).`
87			`## - Using -M directly means running the compiler twice (even worse`
88			`## than renaming).`
89			`if test -z "$gccflag"; then`
90			`gccflag=-MD,`
91			`fi`
92			`"$@" -Wp,"$gccflag$tmpdepfile"`
93			`stat=$?`
94			`if test $stat -eq 0; then :`
95			`else`
96			`rm -f "$tmpdepfile"`
97			`exit $stat`
98			`fi`
99			`rm -f "$depfile"`
100			`echo "$object : \\" > "$depfile"`
101			`alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz`
102			`## The second -e expression handles DOS-style file names with drive letters.`
103			`sed -e 's/^[^:]*: / /' \`
104			`-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"`
105			## This next piece of magic avoids the `deleted header file' problem.
106			`## The problem is that when a header file which appears in a .P file`
107			`## is deleted, the dependency causes make to die (because there is`
108			`## typically no way to rebuild the header). We avoid this by adding`
109			`## dummy dependencies for each header file. Too bad gcc doesn't do`
110			`## this for us directly.`
111			`tr ' ' '`
112			`' < "$tmpdepfile" \|`
113			## Some versions of gcc put a space before the `:'. On the theory
114			`## that the space means something, we add a space to the output as`
115			`## well.`
116			`## Some versions of the HPUX 10.20 sed can't process this invocation`
117			`## correctly. Breaking it into two sed invocations is a workaround.`
118			`sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"`
119			`rm -f "$tmpdepfile"`
120			`;;`
121
122			`hp)`
123			`# This case exists only to let depend.m4 do its work. It works by`
124			`# looking at the text of this script. This case will never be run,`
125			`# since it is checked for above.`
126			`exit 1`
127			`;;`
128
129			`sgi)`
130			`if test "$libtool" = yes; then`
131			`"$@" "-Wp,-MDupdate,$tmpdepfile"`
132			`else`
133			`"$@" -MDupdate "$tmpdepfile"`
134			`fi`
135			`stat=$?`
136			`if test $stat -eq 0; then :`
137			`else`
138			`rm -f "$tmpdepfile"`
139			`exit $stat`
140			`fi`
141			`rm -f "$depfile"`
142
143			`if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files`
144			`echo "$object : \\" > "$depfile"`
145
146			`# Clip off the initial element (the dependent). Don't try to be`
147			`# clever and replace this with sed code, as IRIX sed won't handle`
148			`# lines with more than a fixed number of characters (4096 in`
149			`# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;`
150			# the IRIX cc adds comments like `#:fec' to the end of the
151			`# dependency line.`
152			`tr ' ' '`
153			`' < "$tmpdepfile" \`
154			`\| sed -e 's/^.\.o://' -e 's/#.$//' -e '/^$/ d' \| \`
155			`tr '`
156			`' ' ' >> $depfile`
157			`echo >> $depfile`
158
159			`# The second pass generates a dummy entry for each header file.`
160			`tr ' ' '`
161			`' < "$tmpdepfile" \`
162			`\| sed -e 's/^.\.o://' -e 's/#.$//' -e '/^$/ d' -e 's/$/:/' \`
163			`>> $depfile`
164			`else`
165			`# The sourcefile does not contain any dependencies, so just`
166			`# store a dummy comment line, to avoid errors with the Makefile`
167			`# "include basename.Plo" scheme.`
168			`echo "#dummy" > "$depfile"`
169			`fi`
170			`rm -f "$tmpdepfile"`
171			`;;`
172
173			`aix)`
174			`# The C for AIX Compiler uses -M and outputs the dependencies`
175			`# in a .u file. This file always lives in the current directory.`
176			# Also, the AIX compiler puts `$object:' at the start of each line;
177			`# $object doesn't have directory information.`
178			stripped=`echo "$object" \| sed -e 's,^./,,' -e 's/\(.\)\..*$/\1/'`
179			`tmpdepfile="$stripped.u"`
180			`outname="$stripped.o"`
181			`if test "$libtool" = yes; then`
182			`"$@" -Wc,-M`
183			`else`
184			`"$@" -M`
185			`fi`
186
187			`stat=$?`
188			`if test $stat -eq 0; then :`
189			`else`
190			`rm -f "$tmpdepfile"`
191			`exit $stat`
192			`fi`
193
194			`if test -f "$tmpdepfile"; then`
195			# Each line is of the form `foo.o: dependent.h'.
196			`# Do two passes, one to just change these to`
197			# `$object: dependent.h' and one to simply `dependent.h:'.
198			`sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"`
199			`sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"`
200			`else`
201			`# The sourcefile does not contain any dependencies, so just`
202			`# store a dummy comment line, to avoid errors with the Makefile`
203			`# "include basename.Plo" scheme.`
204			`echo "#dummy" > "$depfile"`
205			`fi`
206			`rm -f "$tmpdepfile"`
207			`;;`
208
209			`tru64)`
210			`# The Tru64 AIX compiler uses -MD to generate dependencies as a side`
211			# effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
212			`# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put`
213			# dependencies in `foo.d' instead, so we check for that too.
214			`# Subdirectories are respected.`
215
216			base=`echo "$object" \| sed -e 's/\.o$/.d/' -e 's/\.lo$/.d/'`
217			`tmpdepfile1="$base.o.d"`
218			`tmpdepfile2="$base.d"`
219			`if test "$libtool" = yes; then`
220			`"$@" -Wc,-MD`
221			`else`
222			`"$@" -MD`
223			`fi`
224
225			`stat=$?`
226			`if test $stat -eq 0; then :`
227			`else`
228			`rm -f "$tmpdepfile1" "$tmpdepfile2"`
229			`exit $stat`
230			`fi`
231
232			`if test -f "$tmpdepfile1"; then`
233			`tmpdepfile="$tmpdepfile1"`
234			`else`
235			`tmpdepfile="$tmpdepfile2"`
236			`fi`
237			`if test -f "$tmpdepfile"; then`
238			`sed -e "s,^.\.[a-z]:,$object:," < "$tmpdepfile" > "$depfile"`
239			`# That's a space and a tab in the [].`
240			`sed -e 's,^.\.[a-z]:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"`
241			`else`
242			`echo "#dummy" > "$depfile"`
243			`fi`
244			`rm -f "$tmpdepfile"`
245			`;;`
246
247			`#nosideeffect)`
248			`# This comment above is used by automake to tell side-effect`
249			`# dependency tracking mechanisms from slower ones.`
250
251			`dashmstdout)`
252			`# Important note: in order to support this mode, a compiler must`
253			`# always write the proprocessed file to stdout, regardless of -o,`
254			`# because we must use -o when running libtool.`
255			`test -z "$dashmflag" && dashmflag=-M`
256			`( IFS=" "`
257			`case " $* " in`
258			`" --mode=compile ") # this is libtool, let us make it quiet`
259			`for arg`
260			`do # cycle over the arguments`
261			`case "$arg" in`
262			`"--mode=compile")`
263			`# insert --quiet before "--mode=compile"`
264			`set fnord "$@" --quiet`
265			`shift # fnord`
266			`;;`
267			`esac`
268			`set fnord "$@" "$arg"`
269			`shift # fnord`
270			`shift # "$arg"`
271			`done`
272			`;;`
273			`esac`
274			`"$@" $dashmflag \| sed 's:^[^:]\:[ ]:'"$object"'\: :' > "$tmpdepfile"`
275			`) &`
276			`proc=$!`
277			`"$@"`
278			`stat=$?`
279			`wait "$proc"`
280			`if test "$stat" != 0; then exit $stat; fi`
281			`rm -f "$depfile"`
282			`cat < "$tmpdepfile" > "$depfile"`
283			`tr ' ' '`
284			`' < "$tmpdepfile" \| \`
285			`## Some versions of the HPUX 10.20 sed can't process this invocation`
286			`## correctly. Breaking it into two sed invocations is a workaround.`
287			`sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"`
288			`rm -f "$tmpdepfile"`
289			`;;`
290
291			`dashXmstdout)`
292			`# This case only exists to satisfy depend.m4. It is never actually`
293			`# run, as this mode is specially recognized in the preamble.`
294			`exit 1`
295			`;;`
296
297			`makedepend)`
298			`# X makedepend`
299			`(`
300			`shift`
301			`cleared=no`
302			`for arg in "$@"; do`
303			`case $cleared in no)`
304			`set ""; shift`
305			`cleared=yes`
306			`esac`
307			`case "$arg" in`
308			`-D\|-I)`
309			`set fnord "$@" "$arg"; shift;;`
310			`-*)`
311			`;;`
312			`*)`
313			`set fnord "$@" "$arg"; shift;;`
314			`esac`
315			`done`
316			obj_suffix="`echo $object \| sed 's/^.*\././'`"
317			`touch "$tmpdepfile"`
318			`${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"`
319			`) &`
320			`proc=$!`
321			`"$@"`
322			`stat=$?`
323			`wait "$proc"`
324			`if test "$stat" != 0; then exit $stat; fi`
325			`rm -f "$depfile"`
326			`cat < "$tmpdepfile" > "$depfile"`
327			`sed '1,2d' "$tmpdepfile" \| tr ' ' '`
328			`' \| \`
329			`## Some versions of the HPUX 10.20 sed can't process this invocation`
330			`## correctly. Breaking it into two sed invocations is a workaround.`
331			`sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \| sed -e 's/$/ :/' >> "$depfile"`
332			`rm -f "$tmpdepfile" "$tmpdepfile".bak`
333			`;;`
334
335			`cpp)`
336			`# Important note: in order to support this mode, a compiler must`
337			`# always write the proprocessed file to stdout, regardless of -o,`
338			`# because we must use -o when running libtool.`
339			`( IFS=" "`
340			`case " $* " in`
341			`" --mode=compile ")`
342			`for arg`
343			`do # cycle over the arguments`
344			`case $arg in`
345			`"--mode=compile")`
346			`# insert --quiet before "--mode=compile"`
347			`set fnord "$@" --quiet`
348			`shift # fnord`
349			`;;`
350			`esac`
351			`set fnord "$@" "$arg"`
352			`shift # fnord`
353			`shift # "$arg"`
354			`done`
355			`;;`
356			`esac`
357			`"$@" -E \|`
358			`sed -n '/^# [0-9][0-9]* "\([^"]\)"./ s:: \1 \\:p' \|`
359			`sed '$ s: \\$::' > "$tmpdepfile"`
360			`) &`
361			`proc=$!`
362			`"$@"`
363			`stat=$?`
364			`wait "$proc"`
365			`if test "$stat" != 0; then exit $stat; fi`
366			`rm -f "$depfile"`
367			`echo "$object : \\" > "$depfile"`
368			`cat < "$tmpdepfile" >> "$depfile"`
369			`sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"`
370			`rm -f "$tmpdepfile"`
371			`;;`
372
373			`msvisualcpp)`
374			`# Important note: in order to support this mode, a compiler must`
375			`# always write the proprocessed file to stdout, regardless of -o,`
376			`# because we must use -o when running libtool.`
377			`( IFS=" "`
378			`case " $* " in`
379			`" --mode=compile ")`
380			`for arg`
381			`do # cycle over the arguments`
382			`case $arg in`
383			`"--mode=compile")`
384			`# insert --quiet before "--mode=compile"`
385			`set fnord "$@" --quiet`
386			`shift # fnord`
387			`;;`
388			`esac`
389			`set fnord "$@" "$arg"`
390			`shift # fnord`
391			`shift # "$arg"`
392			`done`
393			`;;`
394			`esac`
395			`for arg`
396			`do`
397			`case "$arg" in`
398			`"-Gm"\|"/Gm"\|"-Gi"\|"/Gi"\|"-ZI"\|"/ZI")`
399			`set fnord "$@"`
400			`shift`
401			`shift`
402			`;;`
403			`*)`
404			`set fnord "$@" "$arg"`
405			`shift`
406			`shift`
407			`;;`
408			`esac`
409			`done`
410			`"$@" -E \|`
411			sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' \| sort \| uniq > "$tmpdepfile"
412			`) &`
413			`proc=$!`
414			`"$@"`
415			`stat=$?`
416			`wait "$proc"`
417			`if test "$stat" != 0; then exit $stat; fi`
418			`rm -f "$depfile"`
419			`echo "$object : \\" > "$depfile"`
420			`. "$tmpdepfile" \| sed 's% %\\ %g' \| sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"`
421			`echo " " >> "$depfile"`
422			`. "$tmpdepfile" \| sed 's% %\\ %g' \| sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"`
423			`rm -f "$tmpdepfile"`
424			`;;`
425
426			`none)`
427			`exec "$@"`
428			`;;`
429
430			`*)`
431			`echo "Unknown depmode $depmode" 1>&2`
432			`exit 1`
433			`;;`
434			`esac`
435
436			`exit 0`