Subversion Repositories pavr

-- <File header>

-- Project

--    pAVR (pipelined AVR) is an 8 bit RISC controller, compatible with Atmel's

--    AVR core, but about 3x faster in terms of both clock frequency and MIPS.

--    The increase in speed comes from a relatively deep pipeline. The original

--    AVR core has only two pipeline stages (fetch and execute), while pAVR has

--    6 pipeline stages:

--       1. PM    (read Program Memory)

--       2. INSTR (load Instruction)

--       3. RFRD  (decode Instruction and read Register File)

--       4. OPS   (load Operands)

--       5. ALU   (execute ALU opcode or access Unified Memory)

--       6. RFWR  (write Register File)

-- Version

--    0.32

-- Date

--    2002 August 07

-- Author

--    Doru Cuturela, doruu@yahoo.com

-- License

--    This program is free software; you can redistribute it and/or modify

--    it under the terms of the GNU General Public License as published by

--    the Free Software Foundation; either version 2 of the License, or

--    (at your option) any later version.

--    This program is distributed in the hope that it will be useful,

--    but WITHOUT ANY WARRANTY; without even the implied warranty of

--    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

--    GNU General Public License for more details.

--    You should have received a copy of the GNU General Public License

--    along with this program; if not, write to the Free Software

--    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

-- </File header>

-- <File info>

-- This defines the Program Memory needed by pAVR control-section tests.

-- The Program Memory is a trivial, single port, read-write RAM.

-- This is just a testing utility, NOT actually a test.

-- </File info>

-- <File body>

library work;

use work.std_util.all;

use work.pavr_util.all;

use work.pavr_constants.all;

use work.test_pavr_constants.all;

library ieee;

use ieee.std_logic_1164.all;

entity pavr_pm is

   port(

      pavr_pm_clk:  in  std_logic;

      pavr_pm_wr:   in  std_logic;

      pavr_pm_addr: in  std_logic_vector(21 downto 0);

      pavr_pm_di:   in  std_logic_vector(15 downto 0);

      pavr_pm_do:   out std_logic_vector(15 downto 0)

   );

end;

architecture pavr_pm_arch of pavr_pm is

   type tdata_array is array (0 to pavr_pm_len - 1) of std_logic_vector(15 downto 0);

   signal data_array: tdata_array;

begin

   process

   begin

      wait until pavr_pm_clk'event and pavr_pm_clk='1';

      if pavr_pm_wr='0' then

         pavr_pm_do <= data_array(std_logic_vector_to_nat(pavr_pm_addr));

      else

         data_array(std_logic_vector_to_int(pavr_pm_addr)) <= pavr_pm_di;

      end if;

   end process;

end;

-- </File body>