Subversion Repositories pcie_mini

-------------------------------------------------------------------------------

--   ____  ____

--  /   /\/   /

-- /___/  \  /    Vendor: Xilinx 

-- \   \   \/     Version : 1.3

--  \   \         Application : Spartan-6 FPGA GTP Transceiver Wizard

--  /   /         Filename : gtpa1_dual_wrapper.vhd

-- /___/   /\     Timestamp :

-- \   \  /  \ 

--  \___\/\___\

--

--

-- Module GTPA1_DUAL_WRAPPER (a GTP Wrapper)

-- Generated by Xilinx Spartan-6 FPGA GTP Transceiver Wizard

-- 

-- 

-- (c) Copyright 2009 Xilinx, Inc. All rights reserved.

-- 

-- This file contains confidential and proprietary information

-- of Xilinx, Inc. and is protected under U.S. and

-- international copyright and other intellectual property

-- laws.

-- 

-- DISCLAIMER

-- This disclaimer is not a license and does not grant any

-- rights to the materials distributed herewith. Except as

-- otherwise provided in a valid license issued to you by

-- Xilinx, and to the maximum extent permitted by applicable

-- law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND

-- WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES

-- AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING

-- BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-

-- INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and

-- (2) Xilinx shall not be liable (whether in contract or tort,

-- including negligence, or under any other theory of,

-- liability) for any loss or damage of any kind or nature

-- related to, arising under or in connection with these

-- materials, including for any direct, or any indirect,

-- special, incidental, or consequential loss or damage

-- (including loss of data, profits, goodwill, or any type of

-- loss or damage suffered as a result of any action brought

-- by a third party) even if such damage or loss was

-- reasonably foreseeable or Xilinx had been advised of the

-- possibility of the same.

-- 

-- CRITICAL APPLICATIONS

-- Xilinx products are not designed or intended to be fail-

-- safe, or for use in any application requiring fail-safe

-- performance, such as life-support or safety devices or

-- systems, Class III medical devices, nuclear facilities,

-- applications related to the deployment of airbags, or any

-- other applications that could lead to death, personal

-- injury, or severe property or environmental damage

-- (individually and collectively, "Critical

-- Applications"). Customer assumes the sole risk and

-- liability of any use of Xilinx products in Critical

-- Applications, subject only to applicable laws and

-- regulations governing limitations on product liability.

-- 

-- THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS

-- PART OF THIS FILE AT ALL TIMES. 

library ieee;

use ieee.std_logic_1164.all;

use ieee.numeric_std.all;

library UNISIM;

use UNISIM.VCOMPONENTS.ALL;

--***************************** Entity Declaration ****************************

entity GTPA1_DUAL_WRAPPER is

generic

(

    -- Simulation attributes

    WRAPPER_SIM_GTPRESET_SPEEDUP    : integer   := 0; -- Set to 1 to speed up sim reset

    WRAPPER_SIMULATION              : integer   := 0  -- Set to 1 for simulation    

);

port

(

    --_________________________________________________________________________

    --_________________________________________________________________________

    --TILE0  (X0_Y0)

    ------------------------ Loopback and Powerdown Ports ----------------------

    TILE0_RXPOWERDOWN0_IN                   : in   std_logic_vector(1 downto 0);

    TILE0_RXPOWERDOWN1_IN                   : in   std_logic_vector(1 downto 0);

    TILE0_TXPOWERDOWN0_IN                   : in   std_logic_vector(1 downto 0);

    TILE0_TXPOWERDOWN1_IN                   : in   std_logic_vector(1 downto 0);

    --------------------------------- PLL Ports --------------------------------

    TILE0_CLK00_IN                          : in   std_logic;

    TILE0_CLK01_IN                          : in   std_logic;

    TILE0_GTPRESET0_IN                      : in   std_logic;

    TILE0_GTPRESET1_IN                      : in   std_logic;

    TILE0_PLLLKDET0_OUT                     : out  std_logic;

    TILE0_PLLLKDET1_OUT                     : out  std_logic;

    TILE0_RESETDONE0_OUT                    : out  std_logic;

    TILE0_RESETDONE1_OUT                    : out  std_logic;

    ----------------------- Receive Ports - 8b10b Decoder ----------------------

    TILE0_RXCHARISK0_OUT                    : out  std_logic_vector(1 downto 0);

    TILE0_RXCHARISK1_OUT                    : out  std_logic_vector(1 downto 0);

    TILE0_RXDISPERR0_OUT                    : out  std_logic_vector(1 downto 0);

    TILE0_RXDISPERR1_OUT                    : out  std_logic_vector(1 downto 0);

    TILE0_RXNOTINTABLE0_OUT                 : out  std_logic_vector(1 downto 0);

    TILE0_RXNOTINTABLE1_OUT                 : out  std_logic_vector(1 downto 0);

    ---------------------- Receive Ports - Clock Correction --------------------

    TILE0_RXCLKCORCNT0_OUT                  : out  std_logic_vector(2 downto 0);

    TILE0_RXCLKCORCNT1_OUT                  : out  std_logic_vector(2 downto 0);

    --------------- Receive Ports - Comma Detection and Alignment --------------

    TILE0_RXENMCOMMAALIGN0_IN               : in   std_logic;

    TILE0_RXENMCOMMAALIGN1_IN               : in   std_logic;

    TILE0_RXENPCOMMAALIGN0_IN               : in   std_logic;

    TILE0_RXENPCOMMAALIGN1_IN               : in   std_logic;

    ------------------- Receive Ports - RX Data Path interface -----------------

    TILE0_RXDATA0_OUT                       : out  std_logic_vector(15 downto 0);

    TILE0_RXDATA1_OUT                       : out  std_logic_vector(15 downto 0);

    TILE0_RXRESET0_IN                       : in   std_logic;

    TILE0_RXRESET1_IN                       : in   std_logic;

    TILE0_RXUSRCLK0_IN                      : in   std_logic;

    TILE0_RXUSRCLK1_IN                      : in   std_logic;

    TILE0_RXUSRCLK20_IN                     : in   std_logic;

    TILE0_RXUSRCLK21_IN                     : in   std_logic;

    ------- Receive Ports - RX Driver,OOB signalling,Coupling and Eq.,CDR ------

    TILE0_GATERXELECIDLE0_IN                : in   std_logic;

    TILE0_GATERXELECIDLE1_IN                : in   std_logic;

    TILE0_IGNORESIGDET0_IN                  : in   std_logic;

    TILE0_IGNORESIGDET1_IN                  : in   std_logic;

    TILE0_RXELECIDLE0_OUT                   : out  std_logic;

    TILE0_RXELECIDLE1_OUT                   : out  std_logic;

    TILE0_RXN0_IN                           : in   std_logic;

    TILE0_RXN1_IN                           : in   std_logic;

    TILE0_RXP0_IN                           : in   std_logic;

    TILE0_RXP1_IN                           : in   std_logic;

    ----------- Receive Ports - RX Elastic Buffer and Phase Alignment ----------

    TILE0_RXSTATUS0_OUT                     : out  std_logic_vector(2 downto 0);

    TILE0_RXSTATUS1_OUT                     : out  std_logic_vector(2 downto 0);

    -------------- Receive Ports - RX Pipe Control for PCI Express -------------

    TILE0_PHYSTATUS0_OUT                    : out  std_logic;

    TILE0_PHYSTATUS1_OUT                    : out  std_logic;

    TILE0_RXVALID0_OUT                      : out  std_logic;

    TILE0_RXVALID1_OUT                      : out  std_logic;

    -------------------- Receive Ports - RX Polarity Control -------------------

    TILE0_RXPOLARITY0_IN                    : in   std_logic;

    TILE0_RXPOLARITY1_IN                    : in   std_logic;

    ---------------------------- TX/RX Datapath Ports --------------------------

    TILE0_GTPCLKOUT0_OUT                    : out  std_logic_vector(1 downto 0);

    TILE0_GTPCLKOUT1_OUT                    : out  std_logic_vector(1 downto 0);

    ------------------- Transmit Ports - 8b10b Encoder Control -----------------

    TILE0_TXCHARDISPMODE0_IN                : in   std_logic_vector(1 downto 0);

    TILE0_TXCHARDISPMODE1_IN                : in   std_logic_vector(1 downto 0);

    TILE0_TXCHARISK0_IN                     : in   std_logic_vector(1 downto 0);

    TILE0_TXCHARISK1_IN                     : in   std_logic_vector(1 downto 0);

    ------------------ Transmit Ports - TX Data Path interface -----------------

    TILE0_TXDATA0_IN                        : in   std_logic_vector(15 downto 0);

    TILE0_TXDATA1_IN                        : in   std_logic_vector(15 downto 0);

    TILE0_TXUSRCLK0_IN                      : in   std_logic;

    TILE0_TXUSRCLK1_IN                      : in   std_logic;

    TILE0_TXUSRCLK20_IN                     : in   std_logic;

    TILE0_TXUSRCLK21_IN                     : in   std_logic;

    --------------- Transmit Ports - TX Driver and OOB signalling --------------

    TILE0_TXN0_OUT                          : out  std_logic;

    TILE0_TXN1_OUT                          : out  std_logic;

    TILE0_TXP0_OUT                          : out  std_logic;

    TILE0_TXP1_OUT                          : out  std_logic;

    ----------------- Transmit Ports - TX Ports for PCI Express ----------------

    TILE0_TXDETECTRX0_IN                    : in   std_logic;

    TILE0_TXDETECTRX1_IN                    : in   std_logic;

    TILE0_TXELECIDLE0_IN                    : in   std_logic;

    TILE0_TXELECIDLE1_IN                    : in   std_logic

);

    attribute CORE_GENERATION_INFO : string;

    attribute CORE_GENERATION_INFO of GTPA1_DUAL_WRAPPER : entity is "GTPA1_DUAL_WRAPPER,s6_gtpwizard_v1_3,{gtp0_protocol_file=pcie,gtp1_protocol_file=Use_GTP0_settings}";

end GTPA1_DUAL_WRAPPER;

architecture RTL of GTPA1_DUAL_WRAPPER is

--***************************** Signal Declarations *****************************

    -- ground and tied_to_vcc_i signals

    signal  tied_to_ground_i                :   std_logic;

    signal  tied_to_ground_vec_i            :   std_logic_vector(63 downto 0);

    signal  tied_to_vcc_i                   :   std_logic;

    signal  tile0_plllkdet0_i       :   std_logic;

    signal  tile0_plllkdet1_i       :   std_logic;

    signal  tile0_plllkdet0_i2       :   std_logic;

    signal  tile0_plllkdet1_i2       :   std_logic;

--*************************** Component Declarations **************************

component GTPA1_DUAL_WRAPPER_TILE

generic

(

    -- Simulation attributes

    TILE_SIM_GTPRESET_SPEEDUP    : integer   := 0; -- Set to 1 to speed up sim reset 

    --

    TILE_CLKINDC_B_0             : boolean   := FALSE;

    TIlE_CLKINDC_B_1             : boolean   := FALSE;

    --

    TILE_PLL_SOURCE_0            : string    := "PLL0";

    TILE_PLL_SOURCE_1            : string    := "PLL1"

);

port

(

    ------------------------ Loopback and Powerdown Ports ----------------------

    RXPOWERDOWN0_IN                         : in   std_logic_vector(1 downto 0);

    RXPOWERDOWN1_IN                         : in   std_logic_vector(1 downto 0);

    TXPOWERDOWN0_IN                         : in   std_logic_vector(1 downto 0);

    TXPOWERDOWN1_IN                         : in   std_logic_vector(1 downto 0);

    --------------------------------- PLL Ports --------------------------------

    CLK00_IN                                : in   std_logic;

    CLK01_IN                                : in   std_logic;

    GTPRESET0_IN                            : in   std_logic;

    GTPRESET1_IN                            : in   std_logic;

    PLLLKDET0_OUT                           : out  std_logic;

    PLLLKDET1_OUT                           : out  std_logic;

    RESETDONE0_OUT                          : out  std_logic;

    RESETDONE1_OUT                          : out  std_logic;

    ----------------------- Receive Ports - 8b10b Decoder ----------------------

    RXCHARISK0_OUT                          : out  std_logic_vector(1 downto 0);

    RXCHARISK1_OUT                          : out  std_logic_vector(1 downto 0);

    RXDISPERR0_OUT                          : out  std_logic_vector(1 downto 0);

    RXDISPERR1_OUT                          : out  std_logic_vector(1 downto 0);

    RXNOTINTABLE0_OUT                       : out  std_logic_vector(1 downto 0);

    RXNOTINTABLE1_OUT                       : out  std_logic_vector(1 downto 0);

    ---------------------- Receive Ports - Clock Correction --------------------

    RXCLKCORCNT0_OUT                        : out  std_logic_vector(2 downto 0);

    RXCLKCORCNT1_OUT                        : out  std_logic_vector(2 downto 0);

    --------------- Receive Ports - Comma Detection and Alignment --------------

    RXENMCOMMAALIGN0_IN                     : in   std_logic;

    RXENMCOMMAALIGN1_IN                     : in   std_logic;

    RXENPCOMMAALIGN0_IN                     : in   std_logic;

    RXENPCOMMAALIGN1_IN                     : in   std_logic;

    ------------------- Receive Ports - RX Data Path interface -----------------

    RXDATA0_OUT                             : out  std_logic_vector(15 downto 0);

    RXDATA1_OUT                             : out  std_logic_vector(15 downto 0);

    RXRESET0_IN                             : in   std_logic;

    RXRESET1_IN                             : in   std_logic;

    RXUSRCLK0_IN                            : in   std_logic;

    RXUSRCLK1_IN                            : in   std_logic;

    RXUSRCLK20_IN                           : in   std_logic;

    RXUSRCLK21_IN                           : in   std_logic;

    ------- Receive Ports - RX Driver,OOB signalling,Coupling and Eq.,CDR ------

    GATERXELECIDLE0_IN                      : in   std_logic;

    GATERXELECIDLE1_IN                      : in   std_logic;

    IGNORESIGDET0_IN                        : in   std_logic;

    IGNORESIGDET1_IN                        : in   std_logic;

    RXELECIDLE0_OUT                         : out  std_logic;

    RXELECIDLE1_OUT                         : out  std_logic;

    RXN0_IN                                 : in   std_logic;

    RXN1_IN                                 : in   std_logic;

    RXP0_IN                                 : in   std_logic;

    RXP1_IN                                 : in   std_logic;

    ----------- Receive Ports - RX Elastic Buffer and Phase Alignment ----------

    RXSTATUS0_OUT                           : out  std_logic_vector(2 downto 0);

    RXSTATUS1_OUT                           : out  std_logic_vector(2 downto 0);

    -------------- Receive Ports - RX Pipe Control for PCI Express -------------

    PHYSTATUS0_OUT                          : out  std_logic;

    PHYSTATUS1_OUT                          : out  std_logic;

    RXVALID0_OUT                            : out  std_logic;

    RXVALID1_OUT                            : out  std_logic;

    -------------------- Receive Ports - RX Polarity Control -------------------

    RXPOLARITY0_IN                          : in   std_logic;

    RXPOLARITY1_IN                          : in   std_logic;

    ---------------------------- TX/RX Datapath Ports --------------------------

    GTPCLKOUT0_OUT                          : out  std_logic_vector(1 downto 0);

    GTPCLKOUT1_OUT                          : out  std_logic_vector(1 downto 0);

    ------------------- Transmit Ports - 8b10b Encoder Control -----------------

    TXCHARDISPMODE0_IN                      : in   std_logic_vector(1 downto 0);

    TXCHARDISPMODE1_IN                      : in   std_logic_vector(1 downto 0);

    TXCHARISK0_IN                           : in   std_logic_vector(1 downto 0);

    TXCHARISK1_IN                           : in   std_logic_vector(1 downto 0);

    ------------------ Transmit Ports - TX Data Path interface -----------------

    TXDATA0_IN                              : in   std_logic_vector(15 downto 0);

    TXDATA1_IN                              : in   std_logic_vector(15 downto 0);

    TXUSRCLK0_IN                            : in   std_logic;

    TXUSRCLK1_IN                            : in   std_logic;

    TXUSRCLK20_IN                           : in   std_logic;

    TXUSRCLK21_IN                           : in   std_logic;

    --------------- Transmit Ports - TX Driver and OOB signalling --------------

    TXN0_OUT                                : out  std_logic;

    TXN1_OUT                                : out  std_logic;

    TXP0_OUT                                : out  std_logic;

    TXP1_OUT                                : out  std_logic;

    ----------------- Transmit Ports - TX Ports for PCI Express ----------------

    TXDETECTRX0_IN                          : in   std_logic;

    TXDETECTRX1_IN                          : in   std_logic;

    TXELECIDLE0_IN                          : in   std_logic;

    TXELECIDLE1_IN                          : in   std_logic

);

end component;

--********************************* Main Body of Code**************************

begin

    tied_to_ground_i                    <= '0';

    tied_to_ground_vec_i(63 downto 0)   <= (others => '0');

    tied_to_vcc_i                       <= '1';

simulation : if WRAPPER_SIMULATION = 1 generate

    TILE0_PLLLKDET0_OUT                     <= tile0_plllkdet0_i2;

    TILE0_PLLLKDET1_OUT                     <= tile0_plllkdet1_i2;

    process

    begin

        wait until tile0_plllkdet0_i'event;

        if (tile0_plllkdet0_i = '1') then

          tile0_plllkdet0_i2 <= '1' after 100 ns;

        else

          tile0_plllkdet0_i2 <= tile0_plllkdet0_i;

        end if;

    end process;

    process

    begin

        wait until tile0_plllkdet1_i'event;

        if (tile0_plllkdet1_i = '1') then

          tile0_plllkdet1_i2 <= '1' after 100 ns;

        else

          tile0_plllkdet1_i2 <= tile0_plllkdet1_i;

        end if;

    end process;

end generate simulation;

implementation : if WRAPPER_SIMULATION = 0 generate

    TILE0_PLLLKDET0_OUT                     <= tile0_plllkdet0_i;

    TILE0_PLLLKDET1_OUT                     <= tile0_plllkdet1_i;

end generate implementation;

    --------------------------- Tile Instances  -------------------------------   

    --_________________________________________________________________________

    --_________________________________________________________________________

    --TILE0  (X0_Y0)

    tile0_gtpa1_dual_wrapper_i : GTPA1_DUAL_WRAPPER_TILE

    generic map

    (

        -- Simulation attributes

        TILE_SIM_GTPRESET_SPEEDUP    => WRAPPER_SIM_GTPRESET_SPEEDUP,

        -- 

        TILE_CLKINDC_B_0             => TRUE,

        TILE_CLKINDC_B_1             => TRUE,

        --

        TILE_PLL_SOURCE_0            => "PLL0",

        TILE_PLL_SOURCE_1            => "PLL1"

    )

    port map

    (

        ------------------------ Loopback and Powerdown Ports ----------------------

        RXPOWERDOWN0_IN                 =>      TILE0_RXPOWERDOWN0_IN,

        RXPOWERDOWN1_IN                 =>      TILE0_RXPOWERDOWN1_IN,

        TXPOWERDOWN0_IN                 =>      TILE0_TXPOWERDOWN0_IN,

        TXPOWERDOWN1_IN                 =>      TILE0_TXPOWERDOWN1_IN,

        --------------------------------- PLL Ports --------------------------------

        CLK00_IN                        =>      TILE0_CLK00_IN,

        CLK01_IN                        =>      TILE0_CLK01_IN,

        GTPRESET0_IN                    =>      TILE0_GTPRESET0_IN,

        GTPRESET1_IN                    =>      TILE0_GTPRESET1_IN,

        PLLLKDET0_OUT                   =>      tile0_plllkdet0_i,

        PLLLKDET1_OUT                   =>      tile0_plllkdet1_i,

        RESETDONE0_OUT                  =>      TILE0_RESETDONE0_OUT,

        RESETDONE1_OUT                  =>      TILE0_RESETDONE1_OUT,

        ----------------------- Receive Ports - 8b10b Decoder ----------------------

        RXCHARISK0_OUT                  =>      TILE0_RXCHARISK0_OUT,

        RXCHARISK1_OUT                  =>      TILE0_RXCHARISK1_OUT,

        RXDISPERR0_OUT                  =>      TILE0_RXDISPERR0_OUT,

        RXDISPERR1_OUT                  =>      TILE0_RXDISPERR1_OUT,

        RXNOTINTABLE0_OUT               =>      TILE0_RXNOTINTABLE0_OUT,

        RXNOTINTABLE1_OUT               =>      TILE0_RXNOTINTABLE1_OUT,

        ---------------------- Receive Ports - Clock Correction --------------------

        RXCLKCORCNT0_OUT                =>      TILE0_RXCLKCORCNT0_OUT,

        RXCLKCORCNT1_OUT                =>      TILE0_RXCLKCORCNT1_OUT,

        --------------- Receive Ports - Comma Detection and Alignment --------------

        RXENMCOMMAALIGN0_IN             =>      TILE0_RXENMCOMMAALIGN0_IN,

        RXENMCOMMAALIGN1_IN             =>      TILE0_RXENMCOMMAALIGN1_IN,

        RXENPCOMMAALIGN0_IN             =>      TILE0_RXENPCOMMAALIGN0_IN,

        RXENPCOMMAALIGN1_IN             =>      TILE0_RXENPCOMMAALIGN1_IN,

        ------------------- Receive Ports - RX Data Path interface -----------------

        RXDATA0_OUT                     =>      TILE0_RXDATA0_OUT,

        RXDATA1_OUT                     =>      TILE0_RXDATA1_OUT,

        RXRESET0_IN                     =>      TILE0_RXRESET0_IN,

        RXRESET1_IN                     =>      TILE0_RXRESET1_IN,

        RXUSRCLK0_IN                    =>      TILE0_RXUSRCLK0_IN,

        RXUSRCLK1_IN                    =>      TILE0_RXUSRCLK1_IN,

        RXUSRCLK20_IN                   =>      TILE0_RXUSRCLK20_IN,

        RXUSRCLK21_IN                   =>      TILE0_RXUSRCLK21_IN,

        ------- Receive Ports - RX Driver,OOB signalling,Coupling and Eq.,CDR ------

        GATERXELECIDLE0_IN              =>      TILE0_GATERXELECIDLE0_IN,

        GATERXELECIDLE1_IN              =>      TILE0_GATERXELECIDLE1_IN,

        IGNORESIGDET0_IN                =>      TILE0_IGNORESIGDET0_IN,

        IGNORESIGDET1_IN                =>      TILE0_IGNORESIGDET1_IN,

        RXELECIDLE0_OUT                 =>      TILE0_RXELECIDLE0_OUT,

        RXELECIDLE1_OUT                 =>      TILE0_RXELECIDLE1_OUT,

        RXN0_IN                         =>      TILE0_RXN0_IN,

        RXN1_IN                         =>      TILE0_RXN1_IN,

        RXP0_IN                         =>      TILE0_RXP0_IN,

        RXP1_IN                         =>      TILE0_RXP1_IN,

        ----------- Receive Ports - RX Elastic Buffer and Phase Alignment ----------

        RXSTATUS0_OUT                   =>      TILE0_RXSTATUS0_OUT,

        RXSTATUS1_OUT                   =>      TILE0_RXSTATUS1_OUT,

        -------------- Receive Ports - RX Pipe Control for PCI Express -------------

        PHYSTATUS0_OUT                  =>      TILE0_PHYSTATUS0_OUT,

        PHYSTATUS1_OUT                  =>      TILE0_PHYSTATUS1_OUT,

        RXVALID0_OUT                    =>      TILE0_RXVALID0_OUT,

        RXVALID1_OUT                    =>      TILE0_RXVALID1_OUT,

        -------------------- Receive Ports - RX Polarity Control -------------------

        RXPOLARITY0_IN                  =>      TILE0_RXPOLARITY0_IN,

        RXPOLARITY1_IN                  =>      TILE0_RXPOLARITY1_IN,

        ---------------------------- TX/RX Datapath Ports --------------------------

        GTPCLKOUT0_OUT                  =>      TILE0_GTPCLKOUT0_OUT,

        GTPCLKOUT1_OUT                  =>      TILE0_GTPCLKOUT1_OUT,

        ------------------- Transmit Ports - 8b10b Encoder Control -----------------

        TXCHARDISPMODE0_IN              =>      TILE0_TXCHARDISPMODE0_IN,

        TXCHARDISPMODE1_IN              =>      TILE0_TXCHARDISPMODE1_IN,

        TXCHARISK0_IN                   =>      TILE0_TXCHARISK0_IN,

        TXCHARISK1_IN                   =>      TILE0_TXCHARISK1_IN,

        ------------------ Transmit Ports - TX Data Path interface -----------------

        TXDATA0_IN                      =>      TILE0_TXDATA0_IN,

        TXDATA1_IN                      =>      TILE0_TXDATA1_IN,

        TXUSRCLK0_IN                    =>      TILE0_TXUSRCLK0_IN,

        TXUSRCLK1_IN                    =>      TILE0_TXUSRCLK1_IN,

        TXUSRCLK20_IN                   =>      TILE0_TXUSRCLK20_IN,

        TXUSRCLK21_IN                   =>      TILE0_TXUSRCLK21_IN,

        --------------- Transmit Ports - TX Driver and OOB signalling --------------

        TXN0_OUT                        =>      TILE0_TXN0_OUT,

        TXN1_OUT                        =>      TILE0_TXN1_OUT,

        TXP0_OUT                        =>      TILE0_TXP0_OUT,

        TXP1_OUT                        =>      TILE0_TXP1_OUT,

        ----------------- Transmit Ports - TX Ports for PCI Express ----------------

        TXDETECTRX0_IN                  =>      TILE0_TXDETECTRX0_IN,

        TXDETECTRX1_IN                  =>      TILE0_TXDETECTRX1_IN,

        TXELECIDLE0_IN                  =>      TILE0_TXELECIDLE0_IN,

        TXELECIDLE1_IN                  =>      TILE0_TXELECIDLE1_IN

    );

end RTL;