OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] [s6soc/] [trunk/] [rtl/] [cpu/] [zipbones.v] - Blame information for rev 16

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 2 dgisselq
///////////////////////////////////////////////////////////////////////////
2
//
3
// Filename:    zipbones.v
4
//
5
// Project:     Zip CPU -- a small, lightweight, RISC CPU soft core
6
//
7
// Purpose:     In the spirit of keeping the Zip CPU small, this implements a
8
//              Zip System with no peripherals: Any peripherals you wish will
9
//              need to be implemented off-module.
10
//
11
// Creator:     Dan Gisselquist, Ph.D.
12
//              Gisselquist Technology, LLC
13
//
14
///////////////////////////////////////////////////////////////////////////
15
//
16
// Copyright (C) 2015, Gisselquist Technology, LLC
17
//
18
// This program is free software (firmware): you can redistribute it and/or
19
// modify it under the terms of  the GNU General Public License as published
20
// by the Free Software Foundation, either version 3 of the License, or (at
21
// your option) any later version.
22
//
23
// This program is distributed in the hope that it will be useful, but WITHOUT
24
// ANY WARRANTY; without even the implied warranty of MERCHANTIBILITY or
25
// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
26
// for more details.
27
//
28
// License:     GPL, v3, as defined and found on www.gnu.org,
29
//              http://www.gnu.org/licenses/gpl.html
30
//
31
//
32
///////////////////////////////////////////////////////////////////////////
33
//
34
`include "cpudefs.v"
35
//
36
module  zipbones(i_clk, i_rst,
37
                // Wishbone master interface from the CPU
38
                o_wb_cyc, o_wb_stb, o_wb_we, o_wb_addr, o_wb_data,
39
                        i_wb_ack, i_wb_stall, i_wb_data, i_wb_err,
40
                // Incoming interrupts
41
                i_ext_int,
42
                // Our one outgoing interrupt
43
                o_ext_int,
44
                // Wishbone slave interface for debugging purposes
45
                i_dbg_cyc, i_dbg_stb, i_dbg_we, i_dbg_addr, i_dbg_data,
46
                        o_dbg_ack, o_dbg_stall, o_dbg_data
47
`ifdef  DEBUG_SCOPE
48
                , o_zip_debug
49
`endif
50
                );
51
        parameter       RESET_ADDRESS=32'h0100000, ADDRESS_WIDTH=32,
52
                        LGICACHE=6, START_HALTED=0,
53
                        AW=ADDRESS_WIDTH;
54
        input   i_clk, i_rst;
55
        // Wishbone master
56
        output  wire            o_wb_cyc, o_wb_stb, o_wb_we;
57
        output  wire    [(AW-1):0]       o_wb_addr;
58
        output  wire    [31:0]   o_wb_data;
59
        input                   i_wb_ack, i_wb_stall;
60
        input           [31:0]   i_wb_data;
61
        input                   i_wb_err;
62
        // Incoming interrupts
63
        input                   i_ext_int;
64
        // Outgoing interrupt
65
        output  wire            o_ext_int;
66
        // Wishbone slave
67
        input                   i_dbg_cyc, i_dbg_stb, i_dbg_we, i_dbg_addr;
68
        input           [31:0]   i_dbg_data;
69
        output  reg             o_dbg_ack;
70
        output  wire            o_dbg_stall;
71
        output  wire    [31:0]   o_dbg_data;
72
        //
73
`ifdef  DEBUG_SCOPE
74
        output  wire    [31:0]   o_zip_debug;
75
`endif
76
 
77
        // 
78
        //
79
        //
80
        wire    sys_cyc, sys_stb, sys_we;
81
        wire    [4:0]    sys_addr;
82
        wire    [(AW-1):0]       cpu_addr;
83
        wire    [31:0]   sys_data;
84
        wire            sys_ack, sys_stall;
85
 
86
        //
87
        // The external debug interface
88
        //
89
        // We offer only a limited interface here, requiring a pre-register
90
        // write to set the local address.  This interface allows access to
91
        // the Zip System on a debug basis only, and not to the rest of the
92
        // wishbone bus.  Further, to access these registers, the control
93
        // register must first be accessed to both stop the CPU and to 
94
        // set the following address in question.  Hence all accesses require
95
        // two accesses: write the address to the control register (and halt
96
        // the CPU if not halted), then read/write the data from the data
97
        // register.
98
        //
99
        wire            cpu_break, dbg_cmd_write;
100
        reg             cmd_reset, cmd_halt, cmd_step, cmd_clear_pf_cache;
101
        reg     [4:0]    cmd_addr;
102
        wire    [3:0]    cpu_dbg_cc;
103
        assign  dbg_cmd_write = (i_dbg_cyc)&&(i_dbg_stb)&&(i_dbg_we)&&(~i_dbg_addr);
104
        //
105
        // Always start us off with an initial reset
106
        //
107
        initial cmd_reset = 1'b1;
108
        always @(posedge i_clk)
109
                cmd_reset <= ((dbg_cmd_write)&&(i_dbg_data[6]));
110
        //
111
        initial cmd_halt  = START_HALTED;
112
        always @(posedge i_clk)
113
                if (i_rst)
114
                        cmd_halt <= (START_HALTED == 1)? 1'b1 : 1'b0;
115
                else if (dbg_cmd_write)
116
                        cmd_halt <= ((i_dbg_data[10])||(i_dbg_data[8]));
117
                else if ((cmd_step)||(cpu_break))
118
                        cmd_halt  <= 1'b1;
119
 
120
        initial cmd_clear_pf_cache = 1'b0;
121
        always @(posedge i_clk)
122
                if (i_rst)
123
                        cmd_clear_pf_cache <= 1'b0;
124
                else if (dbg_cmd_write)
125
                        cmd_clear_pf_cache <= i_dbg_data[11];
126
                else
127
                        cmd_clear_pf_cache <= 1'b0;
128
        //
129
        initial cmd_step  = 1'b0;
130
        always @(posedge i_clk)
131
                cmd_step <= (dbg_cmd_write)&&(i_dbg_data[8]);
132
        //
133
        initial cmd_addr = 5'h0;
134
        always @(posedge i_clk)
135
                if (dbg_cmd_write)
136
                        cmd_addr <= i_dbg_data[4:0];
137
 
138
        wire    cpu_reset;
139
        assign  cpu_reset = (cmd_reset)||(i_rst);
140
 
141
        wire    cpu_halt, cpu_dbg_stall;
142
        assign  cpu_halt = (i_rst)||((cmd_halt)&&(~cmd_step));
143
        wire    [31:0]   cmd_data;
144
        // Values:
145
        //      0x0003f -> cmd_addr mask
146
        //      0x00040 -> reset
147
        //      0x00080 -> PIC interrrupts enabled
148
        //      0x00100 -> cmd_step
149
        //      0x00200 -> cmd_stall
150
        //      0x00400 -> cmd_halt
151
        //      0x00800 -> cmd_clear_pf_cache
152
        //      0x01000 -> cc.sleep
153
        //      0x02000 -> cc.gie
154
        //      0x10000 -> External interrupt line is high
155
        assign  cmd_data = { 7'h00, 8'h00, i_ext_int,
156
                        cpu_dbg_cc,
157
                        1'b0, cmd_halt, (~cpu_dbg_stall), 1'b0,
158
                        1'b0, cpu_reset, 1'b0, cmd_addr };
159
 
160
        //
161
        // The CPU itself
162
        //
163
        wire            cpu_gbl_stb, cpu_lcl_cyc, cpu_lcl_stb,
164
                        cpu_we, cpu_dbg_we,
165
                        cpu_op_stall, cpu_pf_stall, cpu_i_count;
166
        wire    [31:0]   cpu_data;
167
        wire    [31:0]   cpu_dbg_data;
168
        assign cpu_dbg_we = ((i_dbg_cyc)&&(i_dbg_stb)
169
                                        &&(i_dbg_we)&&(i_dbg_addr));
170
        zipcpu  #(RESET_ADDRESS,ADDRESS_WIDTH,LGICACHE)
171
                thecpu(i_clk, cpu_reset, i_ext_int,
172
                        cpu_halt, cmd_clear_pf_cache, cmd_addr[4:0], cpu_dbg_we,
173
                                i_dbg_data, cpu_dbg_stall, cpu_dbg_data,
174
                                cpu_dbg_cc, cpu_break,
175
                        o_wb_cyc, o_wb_stb,
176
                                cpu_lcl_cyc, cpu_lcl_stb,
177
                                o_wb_we, o_wb_addr, o_wb_data,
178
                                i_wb_ack, i_wb_stall, i_wb_data,
179
                                (i_wb_err)||((cpu_lcl_cyc)&&(cpu_lcl_stb)),
180
                        cpu_op_stall, cpu_pf_stall, cpu_i_count
181
`ifdef  DEBUG_SCOPE
182
                        , o_zip_debug
183
`endif
184
                        );
185
 
186
        // Return debug response values
187
        assign  o_dbg_data = (~i_dbg_addr)?cmd_data :cpu_dbg_data;
188
        initial o_dbg_ack = 1'b0;
189
        always @(posedge i_clk)
190
                o_dbg_ack <= (i_dbg_cyc)&&((~i_dbg_addr)||(~o_dbg_stall));
191
        assign  o_dbg_stall=(i_dbg_cyc)&&(cpu_dbg_stall)&&(i_dbg_addr);
192
 
193
        assign  o_ext_int = (cmd_halt) && (~i_wb_stall);
194
 
195
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.