Subversion Repositories uart2bus_testbench

//

//------------------------------------------------------------------------------

//   Copyright 2007-2011 Mentor Graphics Corporation

//   Copyright 2007-2011 Cadence Design Systems, Inc.

//   Copyright 2010-2011 Synopsys, Inc.

//   Copyright 2013      NVIDIA Corporation

//   All Rights Reserved Worldwide

//

//   Licensed under the Apache License, Version 2.0 (the

//   "License"); you may not use this file except in

//   compliance with the License.  You may obtain a copy of

//   the License at

//

//       http://www.apache.org/licenses/LICENSE-2.0

//

//   Unless required by applicable law or agreed to in

//   writing, software distributed under the License is

//   distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR

//   CONDITIONS OF ANY KIND, either express or implied.  See

//   the License for the specific language governing

//   permissions and limitations under the License.

//------------------------------------------------------------------------------

//------------------------------------------------------------------------------

//

// CLASS: uvm_root

//

// The ~uvm_root~ class serves as the implicit top-level and phase controller for

// all UVM components. Users do not directly instantiate ~uvm_root~. The UVM

// automatically creates a single instance of  that users can

// access via the global (uvm_pkg-scope) variable, ~uvm_top~.

//

// (see uvm_ref_root.gif)

//

// The ~uvm_top~ instance of ~uvm_root~ plays several key roles in the UVM.

//

// Implicit top-level - The ~uvm_top~ serves as an implicit top-level component.

// Any component whose parent is specified as ~null~ becomes a child of ~uvm_top~.

// Thus, all UVM components in simulation are descendants of ~uvm_top~.

//

// Phase control - ~uvm_top~ manages the phasing for all components.

//

// Search - Use ~uvm_top~ to search for components based on their

// hierarchical name. See  and .

//

// Report configuration - Use ~uvm_top~ to globally configure

// report verbosity, log files, and actions. For example,

// ~uvm_top.set_report_verbosity_level_hier(UVM_FULL)~ would set

// full verbosity for all components in simulation.

//

// Global reporter - Because ~uvm_top~ is globally accessible (in uvm_pkg

// scope), UVM's reporting mechanism is accessible from anywhere

// outside ~uvm_component~, such as in modules and sequences.

// See , , and other global

// methods.

//

//

// The ~uvm_top~ instance checks during the end_of_elaboration phase if any errors have

// been generated so far. If errors are found a UVM_FATAL error is being generated as result

// so that the simulation will not continue to the start_of_simulation_phase.

//

//------------------------------------------------------------------------------

typedef class uvm_test_done_objection;

typedef class uvm_cmdline_processor;

typedef class uvm_component_proxy;

typedef class uvm_top_down_visitor_adapter;

class uvm_root extends uvm_component;

  // Function: get()

  // Static accessor for .

  //

  // The static accessor is provided as a convenience wrapper

  // around retrieving the root via the 

  // method.

  //

  // | // Using the uvm_coreservice_t:

  // | uvm_coreservice_t cs;

  // | uvm_root r;

  // | cs = uvm_coreservice_t::get();

  // | r = cs.get_root();

  // |

  // | // Not using the uvm_coreservice_t:

  // | uvm_root r;

  // | r = uvm_root::get();

  //

  extern static function uvm_root get();

  uvm_cmdline_processor clp;

  virtual function string get_type_name();

    return "uvm_root";

  endfunction

  //----------------------------------------------------------------------------

  // Group: Simulation Control

  //----------------------------------------------------------------------------

  // Task: run_test

  //

  // Phases all components through all registered phases. If the optional

  // test_name argument is provided, or if a command-line plusarg,

  // +UVM_TESTNAME=TEST_NAME, is found, then the specified component is created

  // just prior to phasing. The test may contain new verification components or

  // the entire testbench, in which case the test and testbench can be chosen from

  // the command line without forcing recompilation. If the global (package)

  // variable, finish_on_completion, is set, then $finish is called after

  // phasing completes.

  extern virtual task run_test (string test_name="");

  // Function: die

  //

  // This method is called by the report server if a report reaches the maximum

  // quit count or has a UVM_EXIT action associated with it, e.g., as with

  // fatal errors.

  //

  // Calls the  method

  // on the entire  hierarchy in a bottom-up fashion.

  // It then calls  and terminates the simulation

  // with ~$finish~.

  virtual function void die();

    uvm_report_server l_rs = uvm_report_server::get_server();

    // do the pre_abort callbacks

    m_do_pre_abort();

    l_rs.report_summarize();

    $finish;

  endfunction

  // Function: set_timeout

  //

  // Specifies the timeout for the simulation. Default is <`UVM_DEFAULT_TIMEOUT>

  //

  // The timeout is simply the maximum absolute simulation time allowed before a

  // ~FATAL~ occurs.  If the timeout is set to 20ns, then the simulation must end

  // before 20ns, or a ~FATAL~ timeout will occur.

  //

  // This is provided so that the user can prevent the simulation from potentially

  // consuming too many resources (Disk, Memory, CPU, etc) when the testbench is

  // essentially hung.

  //

  //

  extern function void set_timeout(time timeout, bit overridable=1);

  // Variable: finish_on_completion

  //

  // If set, then run_test will call $finish after all phases are executed.

  bit  finish_on_completion = 1;

  //----------------------------------------------------------------------------

  // Group: Topology

  //----------------------------------------------------------------------------

  // Variable: top_levels

  //

  // This variable is a list of all of the top level components in UVM. It

  // includes the uvm_test_top component that is created by  as

  // well as any other top level components that have been instantiated

  // anywhere in the hierarchy.

  uvm_component top_levels[$];

  // Function: find

  extern function uvm_component find (string comp_match);

  // Function: find_all

  //

  // Returns the component handle (find) or list of components handles

  // (find_all) matching a given string. The string may contain the wildcards,

  // * and ?. Strings beginning with '.' are absolute path names. If the optional

  // argument comp is provided, then search begins from that component down

  // (default=all components).

  extern function void find_all (string comp_match,

                                 ref uvm_component comps[$],

                                 input uvm_component comp=null);

  // Function: print_topology

  //

  // Print the verification environment's component topology. The

  // ~printer~ is a  object that controls the format

  // of the topology printout; a ~null~ printer prints with the

  // default output.

  extern function void print_topology  (uvm_printer printer=null);

  // Variable: enable_print_topology

  //

  // If set, then the entire testbench topology is printed just after completion

  // of the end_of_elaboration phase.

  bit  enable_print_topology = 0;

  // Variable- phase_timeout

  //

  // Specifies the timeout for the run phase. Default is `UVM_DEFAULT_TIMEOUT

  time phase_timeout = `UVM_DEFAULT_TIMEOUT;

  // PRIVATE members

  extern function void m_find_all_recurse(string comp_match,

                                          ref uvm_component comps[$],

                                          input uvm_component comp=null);

  extern protected function new ();

  extern protected virtual function bit m_add_child (uvm_component child);

  extern function void build_phase(uvm_phase phase);

  extern local function void m_do_verbosity_settings();

  extern local function void m_do_timeout_settings();

  extern local function void m_do_factory_settings();

  extern local function void m_process_inst_override(string ovr);

  extern local function void m_process_type_override(string ovr);

  extern local function void m_do_config_settings();

  extern local function void m_do_max_quit_settings();

  extern local function void m_do_dump_args();

  extern local function void m_process_config(string cfg, bit is_int);

  extern local function void m_process_default_sequence(string cfg);

  extern function void m_check_verbosity();

  extern virtual function void report_header(UVM_FILE file = 0);

  // singleton handle

  static local uvm_root m_inst;

  // For error checking

  extern virtual task run_phase (uvm_phase phase);

  // phase_started

  // -------------

  // At end of elab phase we need to do tlm binding resolution.

  function void phase_started(uvm_phase phase);

    if (phase == end_of_elaboration_ph) begin

      do_resolve_bindings();

      if (enable_print_topology) print_topology();

      begin

          uvm_report_server srvr;

          srvr = uvm_report_server::get_server();

          if(srvr.get_severity_count(UVM_ERROR) > 0) begin

            uvm_report_fatal("BUILDERR", "stopping due to build errors", UVM_NONE);

          end

      end

    end

  endfunction

  bit m_phase_all_done;

   // internal function not to be used

   // get the initialized singleton instance of uvm_root

   static function uvm_root m_uvm_get_root();

      if (m_inst == null) begin

         m_inst = new();

         void'(uvm_domain::get_common_domain());

         m_inst.m_domain = uvm_domain::get_uvm_domain();

      end

      return m_inst;

   endfunction

`ifndef UVM_NO_DEPRECATED

  // stop_request

  // ------------

  // backward compat only

  // call global_stop_request() or uvm_test_done.stop_request() instead

  function void stop_request();

    uvm_test_done_objection tdo;

    tdo = uvm_test_done_objection::get();

    tdo.stop_request();

  endfunction

`endif

 static local bit m_relnotes_done=0;

 function void end_of_elaboration_phase(uvm_phase phase);

         uvm_component_proxy p = new("proxy");

         uvm_top_down_visitor_adapter#(uvm_component) adapter = new("adapter");

         uvm_coreservice_t cs = uvm_coreservice_t::get();

         uvm_visitor#(uvm_component) v = cs.get_component_visitor();

         adapter.accept(this, v, p);

 endfunction

endclass

//----------------------------------------------------------------------------

// Group: Global Variables

//----------------------------------------------------------------------------

//------------------------------------------------------------------------------

// Variable: uvm_top

//

// This is the top-level that governs phase execution and provides component

// search interface. See  for more information.

//------------------------------------------------------------------------------

const uvm_root uvm_top = uvm_root::get();

//-----------------------------------------------------------------------------

// IMPLEMENTATION

//-----------------------------------------------------------------------------

// get

// ---

function uvm_root uvm_root::get();

   uvm_coreservice_t cs = uvm_coreservice_t::get();

   return cs.get_root();

endfunction

// new

// ---

function uvm_root::new();

  super.new("__top__", null);

  m_rh.set_name("reporter");

  clp = uvm_cmdline_processor::get_inst();

  report_header();

  // This sets up the global verbosity. Other command line args may

  // change individual component verbosity.

  m_check_verbosity();

endfunction

function void uvm_root::report_header(UVM_FILE file = 0);

        string q[$];

        uvm_report_server srvr;

        uvm_cmdline_processor clp;

        string args[$];

        srvr = uvm_report_server::get_server();

        clp = uvm_cmdline_processor::get_inst();

        if (clp.get_arg_matches("+UVM_NO_RELNOTES", args)) return;

        q.push_back("\n----------------------------------------------------------------\n");

        q.push_back({uvm_revision_string(),"\n"});

        q.push_back({uvm_mgc_copyright,"\n"});

        q.push_back({uvm_cdn_copyright,"\n"});

        q.push_back({uvm_snps_copyright,"\n"});

        q.push_back({uvm_cy_copyright,"\n"});

        q.push_back({uvm_nv_copyright,"\n"});

        q.push_back("----------------------------------------------------------------\n");

`ifndef UVM_NO_DEPRECATED

        if(!m_relnotes_done)

                q.push_back("\n  ***********       IMPORTANT RELEASE NOTES         ************\n");

        q.push_back("\n  You are using a version of the UVM library that has been compiled\n");

        q.push_back("  with `UVM_NO_DEPRECATED undefined.\n");

        q.push_back("  See http://www.eda.org/svdb/view.php?id=3313 for more details.\n");

        m_relnotes_done=1;

`endif

`ifndef UVM_OBJECT_DO_NOT_NEED_CONSTRUCTOR

        if(!m_relnotes_done)

                q.push_back("\n  ***********       IMPORTANT RELEASE NOTES         ************\n");

        q.push_back("\n  You are using a version of the UVM library that has been compiled\n");

        q.push_back("  with `UVM_OBJECT_DO_NOT_NEED_CONSTRUCTOR undefined.\n");

        q.push_back("  See http://www.eda.org/svdb/view.php?id=3770 for more details.\n");

        m_relnotes_done=1;

`endif

        if(m_relnotes_done)

                q.push_back("\n      (Specify +UVM_NO_RELNOTES to turn off this notice)\n");

        `uvm_info("UVM/RELNOTES",`UVM_STRING_QUEUE_STREAMING_PACK(q),UVM_LOW)

endfunction

// run_test

// --------

task uvm_root::run_test(string test_name="");

  uvm_report_server l_rs;

  uvm_coreservice_t cs = uvm_coreservice_t::get();

  uvm_factory factory=cs.get_factory();

  bit testname_plusarg;

  int test_name_count;

  string test_names[$];

  string msg;

  uvm_component uvm_test_top;

  process phase_runner_proc; // store thread forked below for final cleanup

  testname_plusarg = 0;

  // Set up the process that decouples the thread that drops objections from

  // the process that processes drop/all_dropped objections. Thus, if the

  // original calling thread (the "dropper") gets killed, it does not affect

  // drain-time and propagation of the drop up the hierarchy.

  // Needs to be done in run_test since it needs to be in an

  // initial block to fork a process.

  uvm_objection::m_init_objections();

`ifndef UVM_NO_DPI

  // Retrieve the test names provided on the command line.  Command line

  // overrides the argument.

  test_name_count = clp.get_arg_values("+UVM_TESTNAME=", test_names);

  // If at least one, use first in queue.

  if (test_name_count > 0) begin

    test_name = test_names[0];

    testname_plusarg = 1;

  end

  // If multiple, provided the warning giving the number, which one will be

  // used and the complete list.

  if (test_name_count > 1) begin

    string test_list;

    string sep;

    for (int i = 0; i < test_names.size(); i++) begin

      if (i != 0)

        sep = ", ";

      test_list = {test_list, sep, test_names[i]};

    end

    uvm_report_warning("MULTTST",

      $sformatf("Multiple (%0d) +UVM_TESTNAME arguments provided on the command line.  '%s' will be used.  Provided list: %s.", test_name_count, test_name, test_list), UVM_NONE);

  end

`else

     // plusarg overrides argument

  if ($value$plusargs("UVM_TESTNAME=%s", test_name)) begin

    `uvm_info("NO_DPI_TSTNAME", "UVM_NO_DPI defined--getting UVM_TESTNAME directly, without DPI", UVM_NONE)

    testname_plusarg = 1;

  end

`endif

  // if test now defined, create it using common factory

  if (test_name != "") begin

        uvm_coreservice_t cs = uvm_coreservice_t::get();

        uvm_factory factory=cs.get_factory();

    if(m_children.exists("uvm_test_top")) begin

      uvm_report_fatal("TTINST",

          "An uvm_test_top already exists via a previous call to run_test", UVM_NONE);

      #0; // forces shutdown because $finish is forked

    end

    $cast(uvm_test_top, factory.create_component_by_name(test_name,

          "", "uvm_test_top", null));

    if (uvm_test_top == null) begin

      msg = testname_plusarg ? {"command line +UVM_TESTNAME=",test_name} :

                               {"call to run_test(",test_name,")"};

      uvm_report_fatal("INVTST",

          {"Requested test from ",msg, " not found." }, UVM_NONE);

    end

  end

  if (m_children.num() == 0) begin

    uvm_report_fatal("NOCOMP",

          {"No components instantiated. You must either instantiate",

           " at least one component before calling run_test or use",

           " run_test to do so. To run a test using run_test,",

           " use +UVM_TESTNAME or supply the test name in",

           " the argument to run_test(). Exiting simulation."}, UVM_NONE);

    return;

  end

  begin

        if(test_name=="")

                uvm_report_info("RNTST", "Running test ...", UVM_LOW);

        else if (test_name == uvm_test_top.get_type_name())

                uvm_report_info("RNTST", {"Running test ",test_name,"..."}, UVM_LOW);

        else

                uvm_report_info("RNTST", {"Running test ",uvm_test_top.get_type_name()," (via factory override for test \"",test_name,"\")..."}, UVM_LOW);

  end

  // phase runner, isolated from calling process

  fork begin

    // spawn the phase runner task

    phase_runner_proc = process::self();

    uvm_phase::m_run_phases();

  end

  join_none

  #0; // let the phase runner start

  wait (m_phase_all_done == 1);

  // clean up after ourselves

  phase_runner_proc.kill();

  l_rs = uvm_report_server::get_server();

  l_rs.report_summarize();

  if (finish_on_completion)

    $finish;

endtask

// find_all

// --------

function void uvm_root::find_all(string comp_match, ref uvm_component comps[$],

                                 input uvm_component comp=null);

  if (comp==null)

    comp = this;

  m_find_all_recurse(comp_match, comps, comp);

endfunction

// find

// ----

function uvm_component uvm_root::find (string comp_match);

  uvm_component comp_list[$];

  find_all(comp_match,comp_list);

  if (comp_list.size() > 1)

    uvm_report_warning("MMATCH",

    $sformatf("Found %0d components matching '%s'. Returning first match, %0s.",

              comp_list.size(),comp_match,comp_list[0].get_full_name()), UVM_NONE);

  if (comp_list.size() == 0) begin

    uvm_report_warning("CMPNFD",

      {"Component matching '",comp_match,

       "' was not found in the list of uvm_components"}, UVM_NONE);

    return null;

  end

  return comp_list[0];

endfunction

// print_topology

// --------------

function void uvm_root::print_topology(uvm_printer printer=null);

  string s;

  if (m_children.num()==0) begin

    uvm_report_warning("EMTCOMP", "print_topology - No UVM components to print.", UVM_NONE);

    return;

  end

  if (printer==null)

    printer = uvm_default_printer;

  foreach (m_children[c]) begin

    if(m_children[c].print_enabled) begin

      printer.print_object("", m_children[c]);

    end

  end

  `uvm_info("UVMTOP",{"UVM testbench topology:\n",printer.emit()},UVM_NONE)

endfunction

// set_timeout

// -----------

function void uvm_root::set_timeout(time timeout, bit overridable=1);

  static bit m_uvm_timeout_overridable = 1;

  if (m_uvm_timeout_overridable == 0) begin

    uvm_report_info("NOTIMOUTOVR",

      $sformatf("The global timeout setting of %0d is not overridable to %0d due to a previous setting.",

         phase_timeout, timeout), UVM_NONE);

    return;

  end

  m_uvm_timeout_overridable = overridable;

  phase_timeout = timeout;

endfunction

// m_find_all_recurse

// ------------------

function void uvm_root::m_find_all_recurse(string comp_match, ref uvm_component comps[$],

                                           input uvm_component comp=null);

  string name;

  if (comp.get_first_child(name))

    do begin

      this.m_find_all_recurse(comp_match, comps, comp.get_child(name));

    end

    while (comp.get_next_child(name));

  if (uvm_is_match(comp_match, comp.get_full_name()) &&

      comp.get_name() != "") /* uvm_top */

    comps.push_back(comp);

endfunction

// m_add_child

// -----------

// Add to the top levels array

function bit uvm_root::m_add_child (uvm_component child);

  if(super.m_add_child(child)) begin

    if(child.get_name() == "uvm_test_top")

      top_levels.push_front(child);

    else

      top_levels.push_back(child);

    return 1;

  end

  else

    return 0;

endfunction

// build_phase

// -----

function void uvm_root::build_phase(uvm_phase phase);

  super.build_phase(phase);

  m_set_cl_msg_args();

  m_do_verbosity_settings();

  m_do_timeout_settings();

  m_do_factory_settings();

  m_do_config_settings();

  m_do_max_quit_settings();

  m_do_dump_args();

endfunction

// m_do_verbosity_settings

// -----------------------

function void uvm_root::m_do_verbosity_settings();

  string set_verbosity_settings[$];

  string split_vals[$];

  uvm_verbosity tmp_verb;

  // Retrieve them all into set_verbosity_settings

  void'(clp.get_arg_values("+uvm_set_verbosity=", set_verbosity_settings));

  for(int i = 0; i < set_verbosity_settings.size(); i++) begin

    uvm_split_string(set_verbosity_settings[i], ",", split_vals);

    if(split_vals.size() < 4 || split_vals.size() > 5) begin

      uvm_report_warning("INVLCMDARGS",

        $sformatf("Invalid number of arguments found on the command line for setting '+uvm_set_verbosity=%s'.  Setting ignored.",

        set_verbosity_settings[i]), UVM_NONE, "", "");

    end

    // Invalid verbosity

    if(!clp.m_convert_verb(split_vals[2], tmp_verb)) begin

      uvm_report_warning("INVLCMDVERB",

        $sformatf("Invalid verbosity found on the command line for setting '%s'.",

        set_verbosity_settings[i]), UVM_NONE, "", "");

    end

  end

endfunction

// m_do_timeout_settings

// ---------------------

function void uvm_root::m_do_timeout_settings();

  string timeout_settings[$];

  string timeout;

  string split_timeout[$];

  int timeout_count;

  time timeout_int;

  string override_spec;

  timeout_count = clp.get_arg_values("+UVM_TIMEOUT=", timeout_settings);

  if (timeout_count ==  0)

    return;

  else begin

    timeout = timeout_settings[0];

    if (timeout_count > 1) begin

      string timeout_list;

      string sep;

      for (int i = 0; i < timeout_settings.size(); i++) begin

        if (i != 0)

          sep = "; ";

        timeout_list = {timeout_list, sep, timeout_settings[i]};

      end

      uvm_report_warning("MULTTIMOUT",

        $sformatf("Multiple (%0d) +UVM_TIMEOUT arguments provided on the command line.  '%s' will be used.  Provided list: %s.",

        timeout_count, timeout, timeout_list), UVM_NONE);

    end

    uvm_report_info("TIMOUTSET",

      $sformatf("'+UVM_TIMEOUT=%s' provided on the command line is being applied.", timeout), UVM_NONE);

      void'($sscanf(timeout,"%d,%s",timeout_int,override_spec));

    case(override_spec)

      "YES"   : set_timeout(timeout_int, 1);

      "NO"    : set_timeout(timeout_int, 0);

      default : set_timeout(timeout_int, 1);

    endcase

  end

endfunction

// m_do_factory_settings

// ---------------------

function void uvm_root::m_do_factory_settings();

  string args[$];

  void'(clp.get_arg_matches("/^\\+(UVM_SET_INST_OVERRIDE|uvm_set_inst_override)=/",args));

  foreach(args[i]) begin

    m_process_inst_override(args[i].substr(23, args[i].len()-1));

  end

  void'(clp.get_arg_matches("/^\\+(UVM_SET_TYPE_OVERRIDE|uvm_set_type_override)=/",args));

  foreach(args[i]) begin

    m_process_type_override(args[i].substr(23, args[i].len()-1));

  end

endfunction

// m_process_inst_override

// -----------------------

function void uvm_root::m_process_inst_override(string ovr);

  string split_val[$];

  uvm_coreservice_t cs = uvm_coreservice_t::get();

  uvm_factory factory=cs.get_factory();

  uvm_split_string(ovr, ",", split_val);

  if(split_val.size() != 3 ) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid setting for +uvm_set_inst_override=", ovr,

      ", setting must specify ,,"}, UVM_NONE);

    return;

  end

  uvm_report_info("INSTOVR", {"Applying instance override from the command line: +uvm_set_inst_override=", ovr}, UVM_NONE);

  factory.set_inst_override_by_name(split_val[0], split_val[1], split_val[2]);

endfunction

// m_process_type_override

// -----------------------

function void uvm_root::m_process_type_override(string ovr);

  string split_val[$];

  int replace=1;

  uvm_coreservice_t cs = uvm_coreservice_t::get();

  uvm_factory factory=cs.get_factory();

  uvm_split_string(ovr, ",", split_val);

  if(split_val.size() > 3 || split_val.size() < 2) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid setting for +uvm_set_type_override=", ovr,

      ", setting must specify ,[,]"}, UVM_NONE);

    return;

  end

  // Replace arg is optional. If set, must be 0 or 1

  if(split_val.size() == 3) begin

    if(split_val[2]=="0") replace =  0;

    else if (split_val[2] == "1") replace = 1;

    else begin

      uvm_report_error("UVM_CMDLINE_PROC", {"Invalid replace arg for +uvm_set_type_override=", ovr ," value must be 0 or 1"}, UVM_NONE);

      return;

    end

  end

  uvm_report_info("UVM_CMDLINE_PROC", {"Applying type override from the command line: +uvm_set_type_override=", ovr}, UVM_NONE);

  factory.set_type_override_by_name(split_val[0], split_val[1], replace);

endfunction

// m_process_config

// ----------------

function void uvm_root::m_process_config(string cfg, bit is_int);

  uvm_bitstream_t v;

  string split_val[$];

  uvm_root m_uvm_top;

  uvm_coreservice_t cs;

  cs = uvm_coreservice_t::get();

  m_uvm_top = cs.get_root();

  uvm_split_string(cfg, ",", split_val);

  if(split_val.size() == 1) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid +uvm_set_config command\"", cfg,

      "\" missing field and value: component is \"", split_val[0], "\""}, UVM_NONE);

    return;

  end

  if(split_val.size() == 2) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid +uvm_set_config command\"", cfg,

      "\" missing value: component is \"", split_val[0], "\"  field is \"", split_val[1], "\""}, UVM_NONE);

    return;

  end

  if(split_val.size() > 3) begin

    uvm_report_error("UVM_CMDLINE_PROC",

      $sformatf("Invalid +uvm_set_config command\"%s\" : expected only 3 fields (component, field and value).", cfg), UVM_NONE);

    return;

  end

  if(is_int) begin

    if(split_val[2].len() > 2) begin

      string base, extval;

      base = split_val[2].substr(0,1);

      extval = split_val[2].substr(2,split_val[2].len()-1);

      case(base)

        "'b" : v = extval.atobin();

        "0b" : v = extval.atobin();

        "'o" : v = extval.atooct();

        "'d" : v = extval.atoi();

        "'h" : v = extval.atohex();

        "'x" : v = extval.atohex();

        "0x" : v = extval.atohex();

        default : v = split_val[2].atoi();

      endcase

    end

    else begin

      v = split_val[2].atoi();

    end

    uvm_report_info("UVM_CMDLINE_PROC", {"Applying config setting from the command line: +uvm_set_config_int=", cfg}, UVM_NONE);

    uvm_config_int::set(m_uvm_top, split_val[0], split_val[1], v);

  end

  else begin

    uvm_report_info("UVM_CMDLINE_PROC", {"Applying config setting from the command line: +uvm_set_config_string=", cfg}, UVM_NONE);

    uvm_config_string::set(m_uvm_top, split_val[0], split_val[1], split_val[2]);

  end

endfunction

// m_process_default_sequence

// ----------------

function void uvm_root::m_process_default_sequence(string cfg);

  string split_val[$];

  uvm_coreservice_t cs = uvm_coreservice_t::get();

  uvm_root m_uvm_top = cs.get_root();

  uvm_factory f = cs.get_factory();

  uvm_object_wrapper w;

  uvm_split_string(cfg, ",", split_val);

  if(split_val.size() == 1) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid +uvm_set_default_sequence command\"", cfg,

      "\" missing phase and type: sequencer is \"", split_val[0], "\""}, UVM_NONE);

    return;

  end

  if(split_val.size() == 2) begin

    uvm_report_error("UVM_CMDLINE_PROC", {"Invalid +uvm_set_default_sequence command\"", cfg,

      "\" missing type: sequencer is \"", split_val[0], "\"  phase is \"", split_val[1], "\""}, UVM_NONE);

    return;

  end

  if(split_val.size() > 3) begin

    uvm_report_error("UVM_CMDLINE_PROC",

      $sformatf("Invalid +uvm_set_default_sequence command\"%s\" : expected only 3 fields (sequencer, phase and type).", cfg), UVM_NONE);

    return;

  end

  w = f.find_wrapper_by_name(split_val[2]);

  if (w == null) begin

      uvm_report_error("UVM_CMDLINE_PROC",

                       $sformatf("Invalid type '%s' provided to +uvm_set_default_sequence", split_val[2]),

                       UVM_NONE);

      return;

  end

  else begin

      uvm_report_info("UVM_CMDLINE_PROC", {"Setting default sequence from the command line: +uvm_set_default_sequence=", cfg}, UVM_NONE);

      uvm_config_db#(uvm_object_wrapper)::set(this, {split_val[0], ".", split_val[1]}, "default_sequence", w);

  end

endfunction : m_process_default_sequence

// m_do_config_settings

// --------------------

function void uvm_root::m_do_config_settings();

  string args[$];

  void'(clp.get_arg_matches("/^\\+(UVM_SET_CONFIG_INT|uvm_set_config_int)=/",args));

  foreach(args[i]) begin

    m_process_config(args[i].substr(20, args[i].len()-1), 1);

  end

  void'(clp.get_arg_matches("/^\\+(UVM_SET_CONFIG_STRING|uvm_set_config_string)=/",args));

  foreach(args[i]) begin

    m_process_config(args[i].substr(23, args[i].len()-1), 0);

  end

  void'(clp.get_arg_matches("/^\\+(UVM_SET_DEFAULT_SEQUENCE|uvm_set_default_sequence)=/", args));

  foreach(args[i]) begin

    m_process_default_sequence(args[i].substr(26, args[i].len()-1));

  end

endfunction

// m_do_max_quit_settings

// ----------------------

function void uvm_root::m_do_max_quit_settings();

  uvm_report_server srvr;

  string max_quit_settings[$];

  int max_quit_count;

  string max_quit;

  string split_max_quit[$];

  int max_quit_int;

  srvr = uvm_report_server::get_server();

  max_quit_count = clp.get_arg_values("+UVM_MAX_QUIT_COUNT=", max_quit_settings);

  if (max_quit_count ==  0)

    return;

  else begin

    max_quit = max_quit_settings[0];

    if (max_quit_count > 1) begin

      string max_quit_list;

      string sep;

      for (int i = 0; i < max_quit_settings.size(); i++) begin