Subversion Repositories uart_block

--! Top level for interconnection between communication blocks: serial_transmitter, serial_receiver, baud_generator

library IEEE;

use IEEE.STD_LOGIC_1164.ALL;

--! Use CPU Definitions package

use work.pkgDefinitions.all;

entity uart_communication_blocks is

    Port ( rst : in  STD_LOGIC;

           clk : in  STD_LOGIC;

                          cycle_wait_baud : in std_logic_vector((nBitsLarge-1) downto 0);

           byte_tx : in  STD_LOGIC_VECTOR ((nBits-1) downto 0);

           byte_rx : out  STD_LOGIC_VECTOR ((nBits-1) downto 0);

           data_sent_tx : out  STD_LOGIC;

           data_received_rx : out  STD_LOGIC;

                          serial_out : out std_logic;

                          serial_in : in std_logic;

           start_tx : in  STD_LOGIC);

end uart_communication_blocks;

architecture Behavioral of uart_communication_blocks is

-- Declare components...

component baud_generator is

    Port ( rst : in STD_LOGIC;

                          clk : in  STD_LOGIC;

           cycle_wait : in  STD_LOGIC_VECTOR ((nBitsLarge-1) downto 0);

                          baud_oversample : out std_logic;

           baud : out  STD_LOGIC);

end component;

component serial_transmitter is

    Port ( rst : in  STD_LOGIC;

           baudClk : in  STD_LOGIC;

           data_byte : in  STD_LOGIC_VECTOR ((nBits-1) downto 0);

                          data_sent : out STD_LOGIC;

           serial_out : out  STD_LOGIC);

end component;

component serial_receiver is

    Port (

                          rst : in STD_LOGIC;

                          baudOverSampleClk : in  STD_LOGIC;

           serial_in : in  STD_LOGIC;

           data_ready : out  STD_LOGIC;

           data_byte : out  STD_LOGIC_VECTOR ((nBits-1) downto 0));

end component;

signal baud_tick : std_logic;

signal baud_tick_oversample : std_logic;

begin

        -- Instantiate baud generator

        uBaudGen : baud_generator port map (

                rst => rst,

                clk => clk,

                cycle_wait => cycle_wait_baud,

                baud_oversample => baud_tick_oversample,

                baud => baud_tick

        );

        -- Instantiate serial_transmitter

        uTransmitter : serial_transmitter port map (

                rst => not start_tx,

                baudClk => baud_tick,

                data_byte => byte_tx,

                data_sent => data_sent_tx,

                serial_out => serial_out

        );

        -- Instantiate serial_receiver

        uReceiver : serial_receiver port map(

                rst => rst,

                baudOverSampleClk => baud_tick_oversample,

                serial_in => serial_in,

                data_ready => data_received_rx,

                data_byte => byte_rx

        );

end Behavioral;