/*! lightshow -- lightshow on ZTEX USB-FPGA Module 1.15a plus Experimental Board 1.10 Copyright (C) 2009-2014 ZTEX GmbH. http://www.ztex.de This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 3 as published by the Free Software Foundation. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, see http://www.gnu.org/licenses/. !*/ #include[ztex-conf.h] // Loads the configuration macros, see ztex-conf.h for the available macros #include[ztex-utils.h] // include basic functions // Endpoint 2 is used to high speed FPGA configuration EP_CONFIG(2,0,BULK,OUT,512,4); // select ZTEX USB FPGA Module 1.15 + Experimental Board 1.10 as target IDENTITY_UFM_1_15(10.13.0.0,0); EXTENSION_EXP_1_10; // enables high speed FPGA configuration, use EP 2 ENABLE_HS_FPGA_CONF(2); // this product string is also used for identification by the host software #define[PRODUCT_STRING]["lightshow for EXP-1.10"] // enable Flash support ENABLE_FLASH; ENABLE_FLASH_BITSTREAM; // include the main part of the firmware kit, define the descriptors, ... #include[ztex.h] void main(void) { // init everything init_USB(); while ( 1 ) { } }