URL https://opencores.org/ocsvn/yifive/yifive/trunk

Subversion Repositories yifive

[/] [yifive/] [trunk/] [caravel_yifive/] [verilog/] [rtl/] [sdram_ctrl/] [src/] [top/] [sdrc_top.v] - Blame information for rev 19

Go to most recent revision | Details | Compare with Previous | View Log


/*********************************************************************
 
  SDRAM Controller top File
 
  This file is part of the sdram controller project
  http://www.opencores.org/cores/sdr_ctrl/
 
  Description: SDRAM Controller Top Module.
    Support 81/6/32 Bit SDRAM.
    Column Address is Programmable
    Bank Bit are 2 Bit
    Row Bits are 12 Bits
 
    This block integrate following sub modules
 
    sdrc_core
        SDRAM Controller file
    wb2sdrc
        This module transalate the bus protocl from wishbone to custome
        sdram controller
 
  To Do:
    nothing
 
  Author(s): Dinesh Annayya, dinesha@opencores.org
  Version  : 0.0 - 8th Jan 2012
                Initial version with 16/32 Bit SDRAM Support
           : 0.1 - 24th Jan 2012
                 8 Bit SDRAM Support is added
             0.2 - 31st Jan 2012
                 sdram_dq and sdram_pad_clk are internally generated
             0.3 - 26th April 2013
                  Sdram Address witdh is increased from 12 to 13bits
 
 
 Copyright (C) 2000 Authors and OPENCORES.ORG
 
 This source file may be used and distributed without
 restriction provided that this copyright statement is not
 removed from the file and that any derivative work contains
 the original copyright notice and the associated disclaimer.
 
 This source file is free software; you can redistribute it
 and/or modify it under the terms of the GNU Lesser General
 Public License as published by the Free Software Foundation;
 either version 2.1 of the License, or (at your option) any
later version.
 
 This source is distributed in the hope that it will be
 useful, but WITHOUT ANY WARRANTY; without even the implied
 warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
 PURPOSE.  See the GNU Lesser General Public License for more
 details.
 
 You should have received a copy of the GNU Lesser General
 Public License along with this source; if not, download it
 from http://www.opencores.org/lgpl.shtml
 
*******************************************************************/
 
 
`include "sdrc_define.v"
module sdrc_top
           (
                    cfg_sdr_width       ,
                    cfg_colbits         ,
 
                // WB bus
                    wb_rst_i            ,
                    wb_clk_i            ,
 
                    wb_stb_i            ,
                    wb_ack_o            ,
                    wb_addr_i           ,
                    wb_we_i             ,
                    wb_dat_i            ,
                    wb_sel_i            ,
                    wb_dat_o            ,
                    wb_cyc_i            ,
                    wb_cti_i            ,
 
 
                /* Interface to SDRAMs */
                    sdram_clk           ,
                    sdram_resetn        ,
                    sdr_cs_n            ,
                    sdr_cke             ,
                    sdr_ras_n           ,
                    sdr_cas_n           ,
                    sdr_we_n            ,
                    sdr_dqm             ,
                    sdr_ba              ,
                    sdr_addr            ,
                    sdr_dq              ,
 
                /* Parameters */
                    sdr_init_done       ,
                    cfg_req_depth       ,               //how many req. buffer should hold
                    cfg_sdr_en          ,
                    cfg_sdr_mode_reg    ,
                    cfg_sdr_tras_d      ,
                    cfg_sdr_trp_d       ,
                    cfg_sdr_trcd_d      ,
                    cfg_sdr_cas         ,
                    cfg_sdr_trcar_d     ,
                    cfg_sdr_twr_d       ,
                    cfg_sdr_rfsh        ,
                    cfg_sdr_rfmax
            );
 
parameter      APP_AW   = 26;  // Application Address Width
parameter      APP_DW   = 32;  // Application Data Width 
parameter      APP_BW   = 4;   // Application Byte Width
parameter      APP_RW   = 9;   // Application Request Width
 
parameter      SDR_DW   = 16;  // SDR Data Width 
parameter      SDR_BW   = 2;   // SDR Byte Width
 
parameter      dw       = 32;  // data width
parameter      tw       = 8;   // tag id width
parameter      bl       = 9;   // burst_lenght_width 
 
//-----------------------------------------------
// Global Variable
// ----------------------------------------------
input                   sdram_clk          ; // SDRAM Clock 
input                   sdram_resetn       ; // Reset Signal
input [1:0]             cfg_sdr_width      ; // 2'b00 - 32 Bit SDR, 2'b01 - 16 Bit SDR, 2'b1x - 8 Bit
input [1:0]             cfg_colbits        ; // 2'b00 - 8 Bit column address, 
                                             // 2'b01 - 9 Bit, 10 - 10 bit, 11 - 11Bits
 
//--------------------------------------
// Wish Bone Interface
// -------------------------------------      
input                   wb_rst_i           ;
input                   wb_clk_i           ;
 
input                   wb_stb_i           ;
output                  wb_ack_o           ;
input [APP_AW-1:0]            wb_addr_i          ;
input                   wb_we_i            ; // 1 - Write, 0 - Read
input [dw-1:0]          wb_dat_i           ;
input [dw/8-1:0]        wb_sel_i           ; // Byte enable
output [dw-1:0]         wb_dat_o           ;
input                   wb_cyc_i           ;
input  [2:0]            wb_cti_i           ;
 
//------------------------------------------------
// Interface to SDRAMs
//------------------------------------------------
output                  sdr_cke             ; // SDRAM CKE
output                  sdr_cs_n            ; // SDRAM Chip Select
output                  sdr_ras_n           ; // SDRAM ras
output                  sdr_cas_n           ; // SDRAM cas
output                  sdr_we_n            ; // SDRAM write enable
output [SDR_BW-1:0]      sdr_dqm             ; // SDRAM Data Mask
output [1:0]             sdr_ba              ; // SDRAM Bank Enable
output [12:0]            sdr_addr            ; // SDRAM Address
inout [SDR_DW-1:0]       sdr_dq              ; // SDRA Data Input/output
 
//------------------------------------------------
// Configuration Parameter
//------------------------------------------------
output                  sdr_init_done       ; // Indicate SDRAM Initialisation Done
input [3:0]              cfg_sdr_tras_d      ; // Active to precharge delay
input [3:0]             cfg_sdr_trp_d       ; // Precharge to active delay
input [3:0]             cfg_sdr_trcd_d      ; // Active to R/W delay
input                   cfg_sdr_en          ; // Enable SDRAM controller
input [1:0]              cfg_req_depth       ; // Maximum Request accepted by SDRAM controller
input [12:0]             cfg_sdr_mode_reg    ;
input [2:0]              cfg_sdr_cas         ; // SDRAM CAS Latency
input [3:0]              cfg_sdr_trcar_d     ; // Auto-refresh period
input [3:0]             cfg_sdr_twr_d       ; // Write recovery delay
input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
 
//--------------------------------------------
// SDRAM controller Interface 
//--------------------------------------------
wire                  app_req            ; // SDRAM request
wire [APP_AW-1:0]     app_req_addr       ; // SDRAM Request Address
wire [bl-1:0]         app_req_len        ;
wire                  app_req_wr_n       ; // 0 - Write, 1 -> Read
wire                  app_req_ack        ; // SDRAM request Accepted
wire                  app_busy_n         ; // 0 -> sdr busy
wire [dw/8-1:0]       app_wr_en_n        ; // Active low sdr byte-wise write data valid
wire                  app_wr_next_req    ; // Ready to accept the next write
wire                  app_rd_valid       ; // sdr read valid
wire                  app_last_rd        ; // Indicate last Read of Burst Transfer
wire                  app_last_wr        ; // Indicate last Write of Burst Transfer
wire [dw-1:0]         app_wr_data        ; // sdr write data
wire  [dw-1:0]        app_rd_data        ; // sdr read data
 
/****************************************
*  These logic has to be implemented using Pads
*  **************************************/
wire  [SDR_DW-1:0]    pad_sdr_din         ; // SDRA Data Input
wire  [SDR_DW-1:0]    sdr_dout            ; // SDRAM Data Output
wire  [SDR_BW-1:0]    sdr_den_n           ; // SDRAM Data Output enable
 
 
assign   sdr_dq = (&sdr_den_n == 1'b0) ? sdr_dout :  {SDR_DW{1'bz}};
assign   pad_sdr_din = sdr_dq;
 
// sdram pad clock is routed back through pad
// SDRAM Clock from Pad, used for registering Read Data
wire #(1.0) sdram_pad_clk = sdram_clk;
 
/************** Ends Here **************************/
wb2sdrc #(.dw(dw),.tw(tw),.bl(bl)) u_wb2sdrc (
      // WB bus
          .wb_rst_i           (wb_rst_i           ) ,
          .wb_clk_i           (wb_clk_i           ) ,
 
          .wb_stb_i           (wb_stb_i           ) ,
          .wb_ack_o           (wb_ack_o           ) ,
          .wb_addr_i          (wb_addr_i          ) ,
          .wb_we_i            (wb_we_i            ) ,
          .wb_dat_i           (wb_dat_i           ) ,
          .wb_sel_i           (wb_sel_i           ) ,
          .wb_dat_o           (wb_dat_o           ) ,
          .wb_cyc_i           (wb_cyc_i           ) ,
          .wb_cti_i           (wb_cti_i           ) ,
 
 
      //SDRAM Controller Hand-Shake Signal 
          .sdram_clk          (sdram_clk          ) ,
          .sdram_resetn       (sdram_resetn       ) ,
          .sdr_req            (app_req            ) ,
          .sdr_req_addr       (app_req_addr       ) ,
          .sdr_req_len        (app_req_len        ) ,
          .sdr_req_wr_n       (app_req_wr_n       ) ,
          .sdr_req_ack        (app_req_ack        ) ,
          .sdr_busy_n         (app_busy_n         ) ,
          .sdr_wr_en_n        (app_wr_en_n        ) ,
          .sdr_wr_next        (app_wr_next_req    ) ,
          .sdr_rd_valid       (app_rd_valid       ) ,
          .sdr_last_rd        (app_last_rd        ) ,
          .sdr_wr_data        (app_wr_data        ) ,
          .sdr_rd_data        (app_rd_data        )
 
      );
 
 
sdrc_core #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_sdrc_core (
          .clk                (sdram_clk          ) ,
          .pad_clk            (sdram_pad_clk      ) ,
          .reset_n            (sdram_resetn       ) ,
          .sdr_width          (cfg_sdr_width      ) ,
          .cfg_colbits        (cfg_colbits        ) ,
 
                /* Request from app */
          .app_req            (app_req            ) ,// Transfer Request
          .app_req_addr       (app_req_addr       ) ,// SDRAM Address
          .app_req_len        (app_req_len        ) ,// Burst Length (in 16 bit words)
          .app_req_wrap       (1'b0               ) ,// Wrap mode request 
          .app_req_wr_n       (app_req_wr_n       ) ,// 0 => Write request, 1 => read req
          .app_req_ack        (app_req_ack        ) ,// Request has been accepted
          .cfg_req_depth      (cfg_req_depth      ) ,//how many req. buffer should hold
 
          .app_wr_data        (app_wr_data        ) ,
          .app_wr_en_n        (app_wr_en_n        ) ,
          .app_rd_data        (app_rd_data        ) ,
          .app_rd_valid       (app_rd_valid       ) ,
          .app_last_rd        (app_last_rd        ) ,
          .app_last_wr        (app_last_wr        ) ,
          .app_wr_next_req    (app_wr_next_req    ) ,
          .sdr_init_done      (sdr_init_done      ) ,
          .app_req_dma_last   (app_req            ) ,
 
                /* Interface to SDRAMs */
          .sdr_cs_n           (sdr_cs_n           ) ,
          .sdr_cke            (sdr_cke            ) ,
          .sdr_ras_n          (sdr_ras_n          ) ,
          .sdr_cas_n          (sdr_cas_n          ) ,
          .sdr_we_n           (sdr_we_n           ) ,
          .sdr_dqm            (sdr_dqm            ) ,
          .sdr_ba             (sdr_ba             ) ,
          .sdr_addr           (sdr_addr           ) ,
          .pad_sdr_din        (pad_sdr_din        ) ,
          .sdr_dout           (sdr_dout           ) ,
          .sdr_den_n          (sdr_den_n          ) ,
 
                /* Parameters */
          .cfg_sdr_en         (cfg_sdr_en         ) ,
          .cfg_sdr_mode_reg   (cfg_sdr_mode_reg   ) ,
          .cfg_sdr_tras_d     (cfg_sdr_tras_d     ) ,
          .cfg_sdr_trp_d      (cfg_sdr_trp_d      ) ,
          .cfg_sdr_trcd_d     (cfg_sdr_trcd_d     ) ,
          .cfg_sdr_cas        (cfg_sdr_cas        ) ,
          .cfg_sdr_trcar_d    (cfg_sdr_trcar_d    ) ,
          .cfg_sdr_twr_d      (cfg_sdr_twr_d      ) ,
          .cfg_sdr_rfsh       (cfg_sdr_rfsh       ) ,
          .cfg_sdr_rfmax      (cfg_sdr_rfmax      )
               );
 
endmodule // sdrc_core

Browse

Tools

Subversion Repositories yifive

[/] [yifive/] [trunk/] [caravel_yifive/] [verilog/] [rtl/] [sdram_ctrl/] [src/] [top/] [sdrc_top.v] - Blame information for rev 19

Line No.	Rev	Author	Line
1	19	dinesha	`/*********************************************************************`
2
3			`SDRAM Controller top File`
4
5			`This file is part of the sdram controller project`
6			`http://www.opencores.org/cores/sdr_ctrl/`
7
8			`Description: SDRAM Controller Top Module.`
9			`Support 81/6/32 Bit SDRAM.`
10			`Column Address is Programmable`
11			`Bank Bit are 2 Bit`
12			`Row Bits are 12 Bits`
13
14			`This block integrate following sub modules`
15
16			`sdrc_core`
17			`SDRAM Controller file`
18			`wb2sdrc`
19			`This module transalate the bus protocl from wishbone to custome`
20			`sdram controller`
21
22			`To Do:`
23			`nothing`
24
25			`Author(s): Dinesh Annayya, dinesha@opencores.org`
26			`Version : 0.0 - 8th Jan 2012`
27			`Initial version with 16/32 Bit SDRAM Support`
28			`: 0.1 - 24th Jan 2012`
29			`8 Bit SDRAM Support is added`
30			`0.2 - 31st Jan 2012`
31			`sdram_dq and sdram_pad_clk are internally generated`
32			`0.3 - 26th April 2013`
33			`Sdram Address witdh is increased from 12 to 13bits`
34
35
36			`Copyright (C) 2000 Authors and OPENCORES.ORG`
37
38			`This source file may be used and distributed without`
39			`restriction provided that this copyright statement is not`
40			`removed from the file and that any derivative work contains`
41			`the original copyright notice and the associated disclaimer.`
42
43			`This source file is free software; you can redistribute it`
44			`and/or modify it under the terms of the GNU Lesser General`
45			`Public License as published by the Free Software Foundation;`
46			`either version 2.1 of the License, or (at your option) any`
47			`later version.`
48
49			`This source is distributed in the hope that it will be`
50			`useful, but WITHOUT ANY WARRANTY; without even the implied`
51			`warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR`
52			`PURPOSE. See the GNU Lesser General Public License for more`
53			`details.`
54
55			`You should have received a copy of the GNU Lesser General`
56			`Public License along with this source; if not, download it`
57			`from http://www.opencores.org/lgpl.shtml`
58
59			`*******************************************************************/`
60
61
62			`include "sdrc_define.v"
63			`module sdrc_top`
64			`(`
65			`cfg_sdr_width ,`
66			`cfg_colbits ,`
67
68			`// WB bus`
69			`wb_rst_i ,`
70			`wb_clk_i ,`
71
72			`wb_stb_i ,`
73			`wb_ack_o ,`
74			`wb_addr_i ,`
75			`wb_we_i ,`
76			`wb_dat_i ,`
77			`wb_sel_i ,`
78			`wb_dat_o ,`
79			`wb_cyc_i ,`
80			`wb_cti_i ,`
81
82
83			`/* Interface to SDRAMs */`
84			`sdram_clk ,`
85			`sdram_resetn ,`
86			`sdr_cs_n ,`
87			`sdr_cke ,`
88			`sdr_ras_n ,`
89			`sdr_cas_n ,`
90			`sdr_we_n ,`
91			`sdr_dqm ,`
92			`sdr_ba ,`
93			`sdr_addr ,`
94			`sdr_dq ,`
95
96			`/* Parameters */`
97			`sdr_init_done ,`
98			`cfg_req_depth , //how many req. buffer should hold`
99			`cfg_sdr_en ,`
100			`cfg_sdr_mode_reg ,`
101			`cfg_sdr_tras_d ,`
102			`cfg_sdr_trp_d ,`
103			`cfg_sdr_trcd_d ,`
104			`cfg_sdr_cas ,`
105			`cfg_sdr_trcar_d ,`
106			`cfg_sdr_twr_d ,`
107			`cfg_sdr_rfsh ,`
108			`cfg_sdr_rfmax`
109			`);`
110
111			`parameter APP_AW = 26; // Application Address Width`
112			`parameter APP_DW = 32; // Application Data Width`
113			`parameter APP_BW = 4; // Application Byte Width`
114			`parameter APP_RW = 9; // Application Request Width`
115
116			`parameter SDR_DW = 16; // SDR Data Width`
117			`parameter SDR_BW = 2; // SDR Byte Width`
118
119			`parameter dw = 32; // data width`
120			`parameter tw = 8; // tag id width`
121			`parameter bl = 9; // burst_lenght_width`
122
123			`//-----------------------------------------------`
124			`// Global Variable`
125			`// ----------------------------------------------`
126			`input sdram_clk ; // SDRAM Clock`
127			`input sdram_resetn ; // Reset Signal`
128			`input [1:0] cfg_sdr_width ; // 2'b00 - 32 Bit SDR, 2'b01 - 16 Bit SDR, 2'b1x - 8 Bit`
129			`input [1:0] cfg_colbits ; // 2'b00 - 8 Bit column address,`
130			`// 2'b01 - 9 Bit, 10 - 10 bit, 11 - 11Bits`
131
132			`//--------------------------------------`
133			`// Wish Bone Interface`
134			`// -------------------------------------`
135			`input wb_rst_i ;`
136			`input wb_clk_i ;`
137
138			`input wb_stb_i ;`
139			`output wb_ack_o ;`
140			`input [APP_AW-1:0] wb_addr_i ;`
141			`input wb_we_i ; // 1 - Write, 0 - Read`
142			`input [dw-1:0] wb_dat_i ;`
143			`input [dw/8-1:0] wb_sel_i ; // Byte enable`
144			`output [dw-1:0] wb_dat_o ;`
145			`input wb_cyc_i ;`
146			`input [2:0] wb_cti_i ;`
147
148			`//------------------------------------------------`
149			`// Interface to SDRAMs`
150			`//------------------------------------------------`
151			`output sdr_cke ; // SDRAM CKE`
152			`output sdr_cs_n ; // SDRAM Chip Select`
153			`output sdr_ras_n ; // SDRAM ras`
154			`output sdr_cas_n ; // SDRAM cas`
155			`output sdr_we_n ; // SDRAM write enable`
156			`output [SDR_BW-1:0] sdr_dqm ; // SDRAM Data Mask`
157			`output [1:0] sdr_ba ; // SDRAM Bank Enable`
158			`output [12:0] sdr_addr ; // SDRAM Address`
159			`inout [SDR_DW-1:0] sdr_dq ; // SDRA Data Input/output`
160
161			`//------------------------------------------------`
162			`// Configuration Parameter`
163			`//------------------------------------------------`
164			`output sdr_init_done ; // Indicate SDRAM Initialisation Done`
165			`input [3:0] cfg_sdr_tras_d ; // Active to precharge delay`
166			`input [3:0] cfg_sdr_trp_d ; // Precharge to active delay`
167			`input [3:0] cfg_sdr_trcd_d ; // Active to R/W delay`
168			`input cfg_sdr_en ; // Enable SDRAM controller`
169			`input [1:0] cfg_req_depth ; // Maximum Request accepted by SDRAM controller`
170			`input [12:0] cfg_sdr_mode_reg ;`
171			`input [2:0] cfg_sdr_cas ; // SDRAM CAS Latency`
172			`input [3:0] cfg_sdr_trcar_d ; // Auto-refresh period`
173			`input [3:0] cfg_sdr_twr_d ; // Write recovery delay`
174			input [`SDR_RFSH_TIMER_W-1 : 0] cfg_sdr_rfsh;
175			input [`SDR_RFSH_ROW_CNT_W -1 : 0] cfg_sdr_rfmax;
176
177			`//--------------------------------------------`
178			`// SDRAM controller Interface`
179			`//--------------------------------------------`
180			`wire app_req ; // SDRAM request`
181			`wire [APP_AW-1:0] app_req_addr ; // SDRAM Request Address`
182			`wire [bl-1:0] app_req_len ;`
183			`wire app_req_wr_n ; // 0 - Write, 1 -> Read`
184			`wire app_req_ack ; // SDRAM request Accepted`
185			`wire app_busy_n ; // 0 -> sdr busy`
186			`wire [dw/8-1:0] app_wr_en_n ; // Active low sdr byte-wise write data valid`
187			`wire app_wr_next_req ; // Ready to accept the next write`
188			`wire app_rd_valid ; // sdr read valid`
189			`wire app_last_rd ; // Indicate last Read of Burst Transfer`
190			`wire app_last_wr ; // Indicate last Write of Burst Transfer`
191			`wire [dw-1:0] app_wr_data ; // sdr write data`
192			`wire [dw-1:0] app_rd_data ; // sdr read data`
193
194			`/****************************************`
195			`* These logic has to be implemented using Pads`
196			`* **************************************/`
197			`wire [SDR_DW-1:0] pad_sdr_din ; // SDRA Data Input`
198			`wire [SDR_DW-1:0] sdr_dout ; // SDRAM Data Output`
199			`wire [SDR_BW-1:0] sdr_den_n ; // SDRAM Data Output enable`
200
201
202			`assign sdr_dq = (&sdr_den_n == 1'b0) ? sdr_dout : {SDR_DW{1'bz}};`
203			`assign pad_sdr_din = sdr_dq;`
204
205			`// sdram pad clock is routed back through pad`
206			`// SDRAM Clock from Pad, used for registering Read Data`
207			`wire #(1.0) sdram_pad_clk = sdram_clk;`
208
209			`/************ Ends Here ************************/`
210			`wb2sdrc #(.dw(dw),.tw(tw),.bl(bl)) u_wb2sdrc (`
211			`// WB bus`
212			`.wb_rst_i (wb_rst_i ) ,`
213			`.wb_clk_i (wb_clk_i ) ,`
214
215			`.wb_stb_i (wb_stb_i ) ,`
216			`.wb_ack_o (wb_ack_o ) ,`
217			`.wb_addr_i (wb_addr_i ) ,`
218			`.wb_we_i (wb_we_i ) ,`
219			`.wb_dat_i (wb_dat_i ) ,`
220			`.wb_sel_i (wb_sel_i ) ,`
221			`.wb_dat_o (wb_dat_o ) ,`
222			`.wb_cyc_i (wb_cyc_i ) ,`
223			`.wb_cti_i (wb_cti_i ) ,`
224
225
226			`//SDRAM Controller Hand-Shake Signal`
227			`.sdram_clk (sdram_clk ) ,`
228			`.sdram_resetn (sdram_resetn ) ,`
229			`.sdr_req (app_req ) ,`
230			`.sdr_req_addr (app_req_addr ) ,`
231			`.sdr_req_len (app_req_len ) ,`
232			`.sdr_req_wr_n (app_req_wr_n ) ,`
233			`.sdr_req_ack (app_req_ack ) ,`
234			`.sdr_busy_n (app_busy_n ) ,`
235			`.sdr_wr_en_n (app_wr_en_n ) ,`
236			`.sdr_wr_next (app_wr_next_req ) ,`
237			`.sdr_rd_valid (app_rd_valid ) ,`
238			`.sdr_last_rd (app_last_rd ) ,`
239			`.sdr_wr_data (app_wr_data ) ,`
240			`.sdr_rd_data (app_rd_data )`
241
242			`);`
243
244
245			`sdrc_core #(.SDR_DW(SDR_DW) , .SDR_BW(SDR_BW)) u_sdrc_core (`
246			`.clk (sdram_clk ) ,`
247			`.pad_clk (sdram_pad_clk ) ,`
248			`.reset_n (sdram_resetn ) ,`
249			`.sdr_width (cfg_sdr_width ) ,`
250			`.cfg_colbits (cfg_colbits ) ,`
251
252			`/* Request from app */`
253			`.app_req (app_req ) ,// Transfer Request`
254			`.app_req_addr (app_req_addr ) ,// SDRAM Address`
255			`.app_req_len (app_req_len ) ,// Burst Length (in 16 bit words)`
256			`.app_req_wrap (1'b0 ) ,// Wrap mode request`
257			`.app_req_wr_n (app_req_wr_n ) ,// 0 => Write request, 1 => read req`
258			`.app_req_ack (app_req_ack ) ,// Request has been accepted`
259			`.cfg_req_depth (cfg_req_depth ) ,//how many req. buffer should hold`
260
261			`.app_wr_data (app_wr_data ) ,`
262			`.app_wr_en_n (app_wr_en_n ) ,`
263			`.app_rd_data (app_rd_data ) ,`
264			`.app_rd_valid (app_rd_valid ) ,`
265			`.app_last_rd (app_last_rd ) ,`
266			`.app_last_wr (app_last_wr ) ,`
267			`.app_wr_next_req (app_wr_next_req ) ,`
268			`.sdr_init_done (sdr_init_done ) ,`
269			`.app_req_dma_last (app_req ) ,`
270
271			`/* Interface to SDRAMs */`
272			`.sdr_cs_n (sdr_cs_n ) ,`
273			`.sdr_cke (sdr_cke ) ,`
274			`.sdr_ras_n (sdr_ras_n ) ,`
275			`.sdr_cas_n (sdr_cas_n ) ,`
276			`.sdr_we_n (sdr_we_n ) ,`
277			`.sdr_dqm (sdr_dqm ) ,`
278			`.sdr_ba (sdr_ba ) ,`
279			`.sdr_addr (sdr_addr ) ,`
280			`.pad_sdr_din (pad_sdr_din ) ,`
281			`.sdr_dout (sdr_dout ) ,`
282			`.sdr_den_n (sdr_den_n ) ,`
283
284			`/* Parameters */`
285			`.cfg_sdr_en (cfg_sdr_en ) ,`
286			`.cfg_sdr_mode_reg (cfg_sdr_mode_reg ) ,`
287			`.cfg_sdr_tras_d (cfg_sdr_tras_d ) ,`
288			`.cfg_sdr_trp_d (cfg_sdr_trp_d ) ,`
289			`.cfg_sdr_trcd_d (cfg_sdr_trcd_d ) ,`
290			`.cfg_sdr_cas (cfg_sdr_cas ) ,`
291			`.cfg_sdr_trcar_d (cfg_sdr_trcar_d ) ,`
292			`.cfg_sdr_twr_d (cfg_sdr_twr_d ) ,`
293			`.cfg_sdr_rfsh (cfg_sdr_rfsh ) ,`
294			`.cfg_sdr_rfmax (cfg_sdr_rfmax )`
295			`);`
296
297			`endmodule // sdrc_core`