OpenCores
URL https://opencores.org/ocsvn/zap/zap/trunk

Subversion Repositories zap

[/] [zap/] [trunk/] [README.md] - Blame information for rev 43

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 43 Revanth
## The ZAP Soft Processor (ARMv5T Compatible)
2 26 Revanth
 
3
#### Author        : Revanth Kamaraj (revanth91kamaraj@gmail.com)
4
 
5 43 Revanth
### Introduction
6 26 Revanth
 
7 43 Revanth
The ZAP processor is a 10 stage pipelined processor for FPGA with support for cache and MMU (ARMv5T compliant).
8 26 Revanth
 
9 43 Revanth
#### Features
10 26 Revanth
 
11 43 Revanth
##### ZAP Processor (zap_top.v)
12 26 Revanth
 
13 43 Revanth
The ZAP core is a pipelined ATMv5T processor for FPGA.
14 26 Revanth
 
15 43 Revanth
| Property              | Description             |
16
|-----------------------|-------------------------|
17
|HDL                    | Verilog-2001            |
18
|Author                 | Revanth Kamaraj         |
19
|ARM v5T ISA Support    | Fully compatible        |
20
|Branch Predictor       | Direct mapped bimodal   |
21
|Write Buffer           | Yes                     |
22
|Abort Model            | Base Restored           |
23
|Integrated v5T CP15    | Yes                     |
24
|External Coproc. Bus   | No                      |
25
|Cache Interface        | 128-Bit custom interface|
26
|26-Bit Support         | No                      |
27
|L1 Code Cache          | Direct mapped virtual   |
28
|L1 Data Cache          | Direct mapped virtual   |
29
|Cache Write Policy     | Writeback               |
30
|L1 Code TLB            | Direct mapped           |
31
|L1 Data TLB            | Direct mapped           |
32
|Bus Interface          | 32-bit Wishbone B3 Linear incrementing burst |
33
|Cache/TLB Lock Support | No                      |
34
|CP15 Compliance        | v5T (No fine pages)     |
35
|FCSE Support           | Yes                     |
36 26 Revanth
 
37 43 Revanth
 * 10-stage pipeline design. Pipeline has bypass network to resolve dependencies. Most operations execute at a rate of 1 operation per clock.
38
 * 2 write ports for the register file to allow LDR/STR with writeback to execute as a single instruction.
39 26 Revanth
 
40 43 Revanth
#### CPU Configuration (zap_top.v)
41
 
42
| Parameter                | Default| Description |
43
|--------------------------|--------|-------------|
44
| BP_ENTRIES               |  1024 | Branch Predictor Settings. Predictor RAM depth. Must be 2^n and > 2 |
45
| FIFO_DEPTH               |  4    | Branch Predictor Settings. Command FIFO depth. Must be 2^n and > 2  |
46
| STORE_BUFFER_DEPTH       | 16    | Branch Predictor Settings. Depth of the store buffer. Must be 2^n and > 2 |
47
| DATA_SECTION_TLB_ENTRIES |  4    | Data Cache/MMU Configuration. Section TLB entries. Must be 2^n (n > 0) |
48
| DATA_LPAGE_TLB_ENTRIES   |  8    | Data Cache/MMU Configuration. Large page TLB entries. Must be 2^n (n > 0) |
49
| DATA_SPAGE_TLB_ENTRIES   |  16   | Data Cache/MMU Configuration. Small page TLB entries. Must be 2^n (n > 0) |
50
| DATA_CACHE_SIZE          |  1024 | Data Cache/MMU Configuration. Cache size in bytes. Must be at least 256B and 2^n |
51
| CODE_SECTION_TLB_ENTRIES |  4    | Instruction Cache/MMU Configuration. Section TLB entries. Must be 2^n (n > 0) |
52
| CODE_LPAGE_TLB_ENTRIES   |  8    | Instruction Cache/MMU Configuration. Large page TLB entries. Must be 2^n (n > 0) |
53
| CODE_SPAGE_TLB_ENTRIES   |  16   | Instruction Cache/MMU Configuration. Small page TLB entries. Must be 2^n (n > 0) |
54
| CODE_CACHE_SIZE          |  1024 | Instruction Cache/MMU Configuration. Cache size in bytes. Must be at least 256B and 2^n |
55
 
56
#### CPU IO Interface (zap_top.v)
57 26 Revanth
 
58
Wishbone B3 compatible 32-bit bus.
59
 
60 43 Revanth
|        Dir    | Size     | Port               | Description                      |
61
|---------------|----------|--------------------|----------------------------------|
62
|        input  |          | i_clk              |  Clock                           |
63
|        input  |          | i_reset            |  Reset                           |
64
|        input  |          | i_irq              |  Interrupt. Level Sensitive.     |
65
|        input  |          | i_fiq              |  Fast Interrupt. Level Sensitive.|
66
|        output |          |  o_wb_cyc          |  Wishbone B3 Signal              |
67
|        output |          |  o_wb_stb          |  WIshbone B3 signal              |
68
|        output | [31:0]   |  o_wb_adr          |  Wishbone B3 signal.             |
69
|        output |          |  o_wb_we           |  Wishbone B3 signal.             |
70
|        output | [31:0]   |  o_wb_dat          |  Wishbone B3 signal.             |
71
|        output | [3:0]    |  o_wb_sel          |  Wishbone B3 signal.             |
72
|        output | [2:0]    |  o_wb_cti          |  Wishbone B3 signal. Cycle Type Indicator (Supported modes: Incrementing Burst, End of Burst)|
73
|        output | [1:0]    |  o_wb_bte          |  Wishbone B3 signal. Burst Type Indicator (Supported modes: Linear)                          |
74
|        input  |          |  i_wb_ack          |  Wishbone B3 signal.             |
75
|        input  | [31:0]   |  i_wb_dat          |  Wishbone B3 signal.             |
76
|        output |          |   o_wb_stb_nxt     | IGNORE THIS PORT. LEAVE OPEN.    |
77
|        output |          |   o_wb_cyc_nxt     | IGNORE THIS PORT. LEAVE OPEN.    |
78
|        output |   [31:0] |   o_wb_adr_nxt     | IGNORE THIS PORT. LEAVE OPEN.    |
79 26 Revanth
 
80
 
81 43 Revanth
### Getting Started
82
*Tested on Ubuntu 16.04 LTS/18.04 LTS*
83 26 Revanth
 
84 43 Revanth
#### Run Sample Tests
85 26 Revanth
 
86 43 Revanth
Let the variable $test_name hold the name of the test. See the src/ts directory for some basic tests pre-installed. Available test names are: factorial, arm_test, thumb_test, uart. New tests can be added using these as starting templates. Please note that these will be run on the SOC platform (chip_top) that consist of the ZAP processor, 2 x UARTs, a VIC and a timer.
87 42 Revanth
 
88 43 Revanth
```bash
89
sudo apt-get install sudo apt-get install gcc-arm-none-eabi binutils-arm-none-eabi gdb openocd iverilog gtkwave make perl xterm
90
cd $PROJ_ROOT/src/ts/$test_name # $PROJ_ROOT is the project directory.
91
make # Runs the test using IVerilog.
92
cd $PROJ_ROOT/obj/ts/$test_name # Switch to object folder.
93
gvim zap.log.gz    # View the log file
94
gtkwave zap.vcd.gz # Exists if selected by Config.cfg. See PDF document for more information.
95
```
96
To use this processor in your SOC, instantiate this top level CPU module in your project: [CPU top file](/src/rtl/cpu/zap_top.v)
97 42 Revanth
 
98 43 Revanth
### Implementation Specific Details
99
 
100
#### FPGA Timing Performance (Vivado, Retime Enabled)
101
 
102
| FPGA Part          | Speed |  Critical Path |
103
|--------------------|-------|----------------|
104
| xc7a35tiftg256-1L  | 80MHz | Cache access   |
105
 
106
#### Coprocessor #15 Control Registers
107
 
108
##### Register 0 : ID Register
109
 
110
|Bits | Name    | Description                              |
111
|-----|---------|------------------------------------------|
112
|31:0 | Various | Processor ID info.                       |
113
 
114
##### Register 1 : Control
115
 
116
|Bits | Name      | Description                              |
117
|-----|-----------|------------------------------------------|
118
|0    | M         | MMU Enable. Active high                  |
119
|1    | A         | Always 0. Alignment check off            |
120
|2    | D         | Data Cache Enable. Active high           |
121
|3    | W         | Always 1. Write Buffer always on.        |
122
|4    | P         | Always 1. RESERVED                       |
123
|5    | D         | Always 1. RESERVED                       |
124
|6    | L         | Always 1. RESERVED                       |
125
|7    | B         | Always 0. Little Endian                  |
126
|8    | S         | The S bit                                |
127
|9    | R         | The R bit                                |
128
|11   | Z         | Always 1. Branch prediction enabled      |
129
|12   | I         | Instruction Cache Enable. Active high    |
130
|13   | V         | Normal Exception Vectors. Always 0       |
131
|14   | RR        | Always 1. Direct mapped cache.           |
132
|15   | L4        | Always 0. Normal behavior.               |
133
 
134
##### Register 2 : Translation Base Address
135
 
136
|Bits | Name      | Description                              |
137
|-----|-----------|------------------------------------------|
138
|13:0 | M         | Preserve value.                          |
139
|31:14| TTB       | Upper 18-bits of translation address     |
140
 
141
##### Register 3 : Domain Access Control (X=0 to X=15)
142
 
143
|Bits     | Name      | Description                              |
144
|---------|-----------|------------------------------------------|
145
|2X+1:2X  | DX        | DX access permission.                    |
146
 
147
##### Register 5 : Fault Status Register
148
 
149
|Bits | Name      | Description                              |
150
|-----|-----------|------------------------------------------|
151
|3:0  | Status    | Status.                                  |
152
|1:0  | Domain    | Domain.                                  |
153
|11:8 | SBZ       | Always 0. RESERVED                       |
154
 
155
##### Register 6 : Fault Address Register
156
 
157
|Bits | Name      | Description                              |
158
|-----|-----------|------------------------------------------|
159
|31:0 | Addr      | Fault Address.                           |
160
 
161
##### Register 7 : Cache Functions
162
 
163
| Opcode2     |  CRm            | Description                         |
164
|-------------|-----------------|-------------------------------------|
165
|         000 |         0111    |         Flush all caches.           |
166
|         000 |         0101    |         Flush I cache.              |
167
|         000 |         0110    |         Flush D cache.              |
168
|         000 |         1011    |         Clean all caches.           |
169
|         000 |         1010    |         Clean D cache.              |
170
|         000 |         1111    |         Clean and flush all caches. |
171
|         000 |         1110    |         Clean and flush D cache.    |
172
|       Other |        Other    |         Clean and flush ALL caches  |
173
 
174
 
175
##### Register 8 : TLB Functions
176
 
177
|Opcode2 |        CRm    |        Description      |
178
|--------|---------------|-------------------------|
179
|    000 |        0111   |        Flush all TLBs   |
180
|    000 |        0101   |        Flush I TLB      |
181
|    000 |        0110   |        Flush D TLB      |
182
|   Other|        Other  |        Flush all TLBs   |
183
 
184
##### Register 13 : FCSE Extentions
185
 
186
| Field | Description |
187
|-------|-------------|
188
| 31:25 | PID         |
189
 
190
##### Lockdown Support
191
* CPU memory system does not support lockdown.
192
 
193
##### Tiny Pages
194
* No support for tiny pages (1KB).

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.