Subversion Repositories zx_ula

////////////////////////////////////////////////////////////////////////////////

// Copyright (c) 1995-2010 Xilinx, Inc.  All rights reserved.

////////////////////////////////////////////////////////////////////////////////

//   ____  ____ 

//  /   /\/   / 

// /___/  \  /    Vendor: Xilinx 

// \   \   \/     Version : 12.4

//  \   \         Application : xaw2verilog

//  /   /         Filename : master_ula_clock.v

// /___/   /\     Timestamp : 09/25/2012 18:42:40

// \   \  /  \ 

//  \___\/\___\ 

//

//Command: xaw2verilog -st C:\\Documents and Settings\rodriguj\Mis documentos\opencores\zx_ula\branches\xilinx\ulaplus_replacement-upgrade_for_sp16-48k\rtl_ulaplus\ipcore_dir\.\master_ula_clock.xaw C:\\Documents and Settings\rodriguj\Mis documentos\opencores\zx_ula\branches\xilinx\ulaplus_replacement-upgrade_for_sp16-48k\rtl_ulaplus\ipcore_dir\.\master_ula_clock

//Design Name: master_ula_clock

//Device: xc3s100e-5vq100

//

// Module master_ula_clock

// Generated by Xilinx Architecture Wizard

// Written for synthesis tool: XST

// Period Jitter (unit interval) for block DCM_SP_INST = 0.05 UI

// Period Jitter (Peak-to-Peak) for block DCM_SP_INST = 1.92 ns

`timescale 1ns / 1ps

module master_ula_clock(CLKIN_IN,

                        CLKFX_OUT,

                        CLKIN_IBUFG_OUT,

                        CLK0_OUT);

    input CLKIN_IN;

   output CLKFX_OUT;

   output CLKIN_IBUFG_OUT;

   output CLK0_OUT;

   wire CLKFB_IN;

   wire CLKFX_BUF;

   wire CLKIN_IBUFG;

   wire CLK0_BUF;

   wire GND_BIT;

   assign GND_BIT = 0;

   assign CLKIN_IBUFG_OUT = CLKIN_IBUFG;

   assign CLK0_OUT = CLKFB_IN;

   BUFG  CLKFX_BUFG_INST (.I(CLKFX_BUF),

                         .O(CLKFX_OUT));

   IBUFG  CLKIN_IBUFG_INST (.I(CLKIN_IN),

                           .O(CLKIN_IBUFG));

   BUFG  CLK0_BUFG_INST (.I(CLK0_BUF),

                        .O(CLKFB_IN));

   DCM_SP #( .CLK_FEEDBACK("1X"), .CLKDV_DIVIDE(2.0), .CLKFX_DIVIDE(25),

         .CLKFX_MULTIPLY(14), .CLKIN_DIVIDE_BY_2("FALSE"),

         .CLKIN_PERIOD(20.000), .CLKOUT_PHASE_SHIFT("NONE"),

         .DESKEW_ADJUST("SYSTEM_SYNCHRONOUS"), .DFS_FREQUENCY_MODE("LOW"),

         .DLL_FREQUENCY_MODE("LOW"), .DUTY_CYCLE_CORRECTION("TRUE"),

         .FACTORY_JF(16'hC080), .PHASE_SHIFT(0), .STARTUP_WAIT("FALSE") )

         DCM_SP_INST (.CLKFB(CLKFB_IN),

                       .CLKIN(CLKIN_IBUFG),

                       .DSSEN(GND_BIT),

                       .PSCLK(GND_BIT),

                       .PSEN(GND_BIT),

                       .PSINCDEC(GND_BIT),

                       .RST(GND_BIT),

                       .CLKDV(),

                       .CLKFX(CLKFX_BUF),

                       .CLKFX180(),

                       .CLK0(CLK0_BUF),

                       .CLK2X(),

                       .CLK2X180(),

                       .CLK90(),

                       .CLK180(),

                       .CLK270(),

                       .LOCKED(),

                       .PSDONE(),

                       .STATUS());

endmodule