URL
https://opencores.org/ocsvn/or1k_old/or1k_old/trunk
Subversion Repositories or1k_old
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 1377 to Rev 1378
- ↔ Reverse comparison
Rev 1377 → Rev 1378
/branches/stable_0_1_x/or1ksim/configure
1317,11 → 1317,11
|
# Some tools Automake needs. |
|
ACLOCAL=${ACLOCAL-"${am_missing_run}"aclocal-${am__api_version}""} |
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} |
|
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} |
|
AUTOMAKE=${AUTOMAKE-"${am_missing_run}"automake-${am__api_version}""} |
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} |
|
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} |
|
1430,7 → 1430,7
esac |
|
# We want these before the checks, so the checks can modify their values. |
test -z "$CFLAGS" && CFLAGS=-g auto_cflags=1 |
test -z "$CFLAGS" && CFLAGS="-g -Wall" auto_cflags=1 |
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
3120,7 → 3120,7
fi |
done |
|
for ac_func in strndup grantpt unlockpt ptsname on_exit |
for ac_func in strndup grantpt unlockpt ptsname on_exit isblank |
do |
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh` |
echo "$as_me:3126: checking for $ac_func" >&5 |
3430,7 → 3430,7
for ac_header in unistd.h stdlib.h varargs.h stdarg.h string.h \ |
sys/ptem.h sys/pte.h sys/stream.h sys/stropts.h sys/select.h \ |
termcap.h termios.h termio.h sys/file.h locale.h\ |
net/ethernet.h malloc.h |
net/ethernet.h sys/ethernet.h malloc.h inttypes.h |
do |
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` |
echo "$as_me:3436: checking for $ac_header" >&5 |
3644,11 → 3644,1261
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
|
echo "$as_me:3647: checking for uint8_t" >&5 |
echo $ECHO_N "checking for uint8_t... $ECHO_C" >&6 |
if test "${ac_cv_type_uint8_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3653 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((uint8_t *) 0) |
return 0; |
if (sizeof (uint8_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3669: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3672: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3675: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3678: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_uint8_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_uint8_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3688: result: $ac_cv_type_uint8_t" >&5 |
echo "${ECHO_T}$ac_cv_type_uint8_t" >&6 |
if test $ac_cv_type_uint8_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_UINT8_T 1 |
EOF |
|
fi |
echo "$as_me:3697: checking for uint16_t" >&5 |
echo $ECHO_N "checking for uint16_t... $ECHO_C" >&6 |
if test "${ac_cv_type_uint16_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3703 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((uint16_t *) 0) |
return 0; |
if (sizeof (uint16_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3719: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3722: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3725: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3728: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_uint16_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_uint16_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3738: result: $ac_cv_type_uint16_t" >&5 |
echo "${ECHO_T}$ac_cv_type_uint16_t" >&6 |
if test $ac_cv_type_uint16_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_UINT16_T 1 |
EOF |
|
fi |
echo "$as_me:3747: checking for uint32_t" >&5 |
echo $ECHO_N "checking for uint32_t... $ECHO_C" >&6 |
if test "${ac_cv_type_uint32_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3753 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((uint32_t *) 0) |
return 0; |
if (sizeof (uint32_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3769: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3772: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3775: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3778: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_uint32_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_uint32_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3788: result: $ac_cv_type_uint32_t" >&5 |
echo "${ECHO_T}$ac_cv_type_uint32_t" >&6 |
if test $ac_cv_type_uint32_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_UINT32_T 1 |
EOF |
|
fi |
|
echo "$as_me:3798: checking for int8_t" >&5 |
echo $ECHO_N "checking for int8_t... $ECHO_C" >&6 |
if test "${ac_cv_type_int8_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3804 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((int8_t *) 0) |
return 0; |
if (sizeof (int8_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3820: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3823: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3826: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3829: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_int8_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_int8_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3839: result: $ac_cv_type_int8_t" >&5 |
echo "${ECHO_T}$ac_cv_type_int8_t" >&6 |
if test $ac_cv_type_int8_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_INT8_T 1 |
EOF |
|
fi |
echo "$as_me:3848: checking for int16_t" >&5 |
echo $ECHO_N "checking for int16_t... $ECHO_C" >&6 |
if test "${ac_cv_type_int16_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3854 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((int16_t *) 0) |
return 0; |
if (sizeof (int16_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3870: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3873: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3876: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3879: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_int16_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_int16_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3889: result: $ac_cv_type_int16_t" >&5 |
echo "${ECHO_T}$ac_cv_type_int16_t" >&6 |
if test $ac_cv_type_int16_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_INT16_T 1 |
EOF |
|
fi |
echo "$as_me:3898: checking for int32_t" >&5 |
echo $ECHO_N "checking for int32_t... $ECHO_C" >&6 |
if test "${ac_cv_type_int32_t+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3904 "configure" |
#include "confdefs.h" |
#include <inttypes.h> |
|
int |
main () |
{ |
if ((int32_t *) 0) |
return 0; |
if (sizeof (int32_t)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3920: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3923: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3926: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3929: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_int32_t=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_int32_t=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3939: result: $ac_cv_type_int32_t" >&5 |
echo "${ECHO_T}$ac_cv_type_int32_t" >&6 |
if test $ac_cv_type_int32_t = yes; then |
|
cat >>confdefs.h <<EOF |
#define HAVE_INT32_T 1 |
EOF |
|
fi |
|
echo "$as_me:3949: checking for char" >&5 |
echo $ECHO_N "checking for char... $ECHO_C" >&6 |
if test "${ac_cv_type_char+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 3955 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
if ((char *) 0) |
return 0; |
if (sizeof (char)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:3970: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:3973: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:3976: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3979: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_char=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_char=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:3989: result: $ac_cv_type_char" >&5 |
echo "${ECHO_T}$ac_cv_type_char" >&6 |
|
echo "$as_me:3992: checking size of char" >&5 |
echo $ECHO_N "checking size of char... $ECHO_C" >&6 |
if test "${ac_cv_sizeof_char+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test "$ac_cv_type_char" = yes; then |
if test "$cross_compiling" = yes; then |
# Depending upon the size, compute the lo and hi bounds. |
cat >conftest.$ac_ext <<_ACEOF |
#line 4001 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (char)) >= 0)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4013: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4016: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4019: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4022: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=0 ac_mid=0 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4027 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (char)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4039: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4042: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4045: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4048: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=-1 ac_mid=-1 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4064 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (char)) >= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4076: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4079: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4082: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4085: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
# Binary search between lo and hi bounds. |
while test "x$ac_lo" != "x$ac_hi"; do |
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` |
cat >conftest.$ac_ext <<_ACEOF |
#line 4101 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (char)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4113: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4116: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4119: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4122: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
ac_cv_sizeof_char=$ac_lo |
else |
if test "$cross_compiling" = yes; then |
{ { echo "$as_me:4135: error: cannot run test program while cross compiling" >&5 |
echo "$as_me: error: cannot run test program while cross compiling" >&2;} |
{ (exit 1); exit 1; }; } |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4140 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
FILE *f = fopen ("conftest.val", "w"); |
if (!f) |
exit (1); |
fprintf (f, "%d", (sizeof (char))); |
fclose (f); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest$ac_exeext |
if { (eval echo "$as_me:4156: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:4159: \$? = $ac_status" >&5 |
(exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
{ (eval echo "$as_me:4161: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4164: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_sizeof_char=`cat conftest.val` |
else |
echo "$as_me: program exited with status $ac_status" >&5 |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
fi |
rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
fi |
fi |
rm -f conftest.val |
else |
ac_cv_sizeof_char=0 |
fi |
fi |
echo "$as_me:4180: result: $ac_cv_sizeof_char" >&5 |
echo "${ECHO_T}$ac_cv_sizeof_char" >&6 |
cat >>confdefs.h <<EOF |
#define SIZEOF_CHAR $ac_cv_sizeof_char |
EOF |
|
echo "$as_me:4186: checking for short" >&5 |
echo $ECHO_N "checking for short... $ECHO_C" >&6 |
if test "${ac_cv_type_short+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4192 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
if ((short *) 0) |
return 0; |
if (sizeof (short)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4207: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4210: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4213: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4216: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_short=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_short=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:4226: result: $ac_cv_type_short" >&5 |
echo "${ECHO_T}$ac_cv_type_short" >&6 |
|
echo "$as_me:4229: checking size of short" >&5 |
echo $ECHO_N "checking size of short... $ECHO_C" >&6 |
if test "${ac_cv_sizeof_short+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test "$ac_cv_type_short" = yes; then |
if test "$cross_compiling" = yes; then |
# Depending upon the size, compute the lo and hi bounds. |
cat >conftest.$ac_ext <<_ACEOF |
#line 4238 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (short)) >= 0)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4250: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4253: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4256: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4259: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=0 ac_mid=0 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4264 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (short)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4276: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4279: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4282: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4285: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=-1 ac_mid=-1 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4301 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (short)) >= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4313: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4316: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4319: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4322: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
# Binary search between lo and hi bounds. |
while test "x$ac_lo" != "x$ac_hi"; do |
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` |
cat >conftest.$ac_ext <<_ACEOF |
#line 4338 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (short)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4350: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4353: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4356: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4359: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
ac_cv_sizeof_short=$ac_lo |
else |
if test "$cross_compiling" = yes; then |
{ { echo "$as_me:4372: error: cannot run test program while cross compiling" >&5 |
echo "$as_me: error: cannot run test program while cross compiling" >&2;} |
{ (exit 1); exit 1; }; } |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4377 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
FILE *f = fopen ("conftest.val", "w"); |
if (!f) |
exit (1); |
fprintf (f, "%d", (sizeof (short))); |
fclose (f); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest$ac_exeext |
if { (eval echo "$as_me:4393: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:4396: \$? = $ac_status" >&5 |
(exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
{ (eval echo "$as_me:4398: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4401: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_sizeof_short=`cat conftest.val` |
else |
echo "$as_me: program exited with status $ac_status" >&5 |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
fi |
rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
fi |
fi |
rm -f conftest.val |
else |
ac_cv_sizeof_short=0 |
fi |
fi |
echo "$as_me:4417: result: $ac_cv_sizeof_short" >&5 |
echo "${ECHO_T}$ac_cv_sizeof_short" >&6 |
cat >>confdefs.h <<EOF |
#define SIZEOF_SHORT $ac_cv_sizeof_short |
EOF |
|
echo "$as_me:4423: checking for int" >&5 |
echo $ECHO_N "checking for int... $ECHO_C" >&6 |
if test "${ac_cv_type_int+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4429 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
if ((int *) 0) |
return 0; |
if (sizeof (int)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4444: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4447: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4450: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4453: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_int=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_int=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:4463: result: $ac_cv_type_int" >&5 |
echo "${ECHO_T}$ac_cv_type_int" >&6 |
|
echo "$as_me:4466: checking size of int" >&5 |
echo $ECHO_N "checking size of int... $ECHO_C" >&6 |
if test "${ac_cv_sizeof_int+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test "$ac_cv_type_int" = yes; then |
if test "$cross_compiling" = yes; then |
# Depending upon the size, compute the lo and hi bounds. |
cat >conftest.$ac_ext <<_ACEOF |
#line 4475 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (int)) >= 0)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4487: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4490: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4493: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4496: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=0 ac_mid=0 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4501 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (int)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4513: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4516: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4519: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4522: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=-1 ac_mid=-1 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4538 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (int)) >= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4550: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4553: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4556: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4559: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
# Binary search between lo and hi bounds. |
while test "x$ac_lo" != "x$ac_hi"; do |
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` |
cat >conftest.$ac_ext <<_ACEOF |
#line 4575 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (int)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4587: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4590: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4593: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4596: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
ac_cv_sizeof_int=$ac_lo |
else |
if test "$cross_compiling" = yes; then |
{ { echo "$as_me:4609: error: cannot run test program while cross compiling" >&5 |
echo "$as_me: error: cannot run test program while cross compiling" >&2;} |
{ (exit 1); exit 1; }; } |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4614 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
FILE *f = fopen ("conftest.val", "w"); |
if (!f) |
exit (1); |
fprintf (f, "%d", (sizeof (int))); |
fclose (f); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest$ac_exeext |
if { (eval echo "$as_me:4630: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:4633: \$? = $ac_status" >&5 |
(exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
{ (eval echo "$as_me:4635: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4638: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_sizeof_int=`cat conftest.val` |
else |
echo "$as_me: program exited with status $ac_status" >&5 |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
fi |
rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
fi |
fi |
rm -f conftest.val |
else |
ac_cv_sizeof_int=0 |
fi |
fi |
echo "$as_me:4654: result: $ac_cv_sizeof_int" >&5 |
echo "${ECHO_T}$ac_cv_sizeof_int" >&6 |
cat >>confdefs.h <<EOF |
#define SIZEOF_INT $ac_cv_sizeof_int |
EOF |
|
echo "$as_me:4660: checking for long" >&5 |
echo $ECHO_N "checking for long... $ECHO_C" >&6 |
if test "${ac_cv_type_long+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4666 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
if ((long *) 0) |
return 0; |
if (sizeof (long)) |
return 0; |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4681: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4684: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4687: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4690: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_type_long=yes |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_cv_type_long=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:4700: result: $ac_cv_type_long" >&5 |
echo "${ECHO_T}$ac_cv_type_long" >&6 |
|
echo "$as_me:4703: checking size of long" >&5 |
echo $ECHO_N "checking size of long... $ECHO_C" >&6 |
if test "${ac_cv_sizeof_long+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test "$ac_cv_type_long" = yes; then |
if test "$cross_compiling" = yes; then |
# Depending upon the size, compute the lo and hi bounds. |
cat >conftest.$ac_ext <<_ACEOF |
#line 4712 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (long)) >= 0)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4724: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4727: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4730: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4733: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=0 ac_mid=0 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4738 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (long)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4750: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4753: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4756: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4759: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1`; ac_mid=`expr 2 '*' $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=-1 ac_mid=-1 |
while :; do |
cat >conftest.$ac_ext <<_ACEOF |
#line 4775 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (long)) >= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4787: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4790: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4793: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4796: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_lo=$ac_mid; break |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_hi=`expr $ac_mid - 1`; ac_mid=`expr 2 '*' $ac_mid` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
# Binary search between lo and hi bounds. |
while test "x$ac_lo" != "x$ac_hi"; do |
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo` |
cat >conftest.$ac_ext <<_ACEOF |
#line 4812 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
int _array_ [1 - 2 * !((sizeof (long)) <= $ac_mid)] |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:4824: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:4827: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:4830: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4833: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_hi=$ac_mid |
else |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
ac_lo=`expr $ac_mid + 1` |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
ac_cv_sizeof_long=$ac_lo |
else |
if test "$cross_compiling" = yes; then |
{ { echo "$as_me:4846: error: cannot run test program while cross compiling" >&5 |
echo "$as_me: error: cannot run test program while cross compiling" >&2;} |
{ (exit 1); exit 1; }; } |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line 4851 "configure" |
#include "confdefs.h" |
$ac_includes_default |
int |
main () |
{ |
FILE *f = fopen ("conftest.val", "w"); |
if (!f) |
exit (1); |
fprintf (f, "%d", (sizeof (long))); |
fclose (f); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest$ac_exeext |
if { (eval echo "$as_me:4867: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:4870: \$? = $ac_status" >&5 |
(exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
{ (eval echo "$as_me:4872: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:4875: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_sizeof_long=`cat conftest.val` |
else |
echo "$as_me: program exited with status $ac_status" >&5 |
echo "$as_me: failed program was:" >&5 |
cat conftest.$ac_ext >&5 |
fi |
rm -f core core.* *.core conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
fi |
fi |
rm -f conftest.val |
else |
ac_cv_sizeof_long=0 |
fi |
fi |
echo "$as_me:4891: result: $ac_cv_sizeof_long" >&5 |
echo "${ECHO_T}$ac_cv_sizeof_long" >&6 |
cat >>confdefs.h <<EOF |
#define SIZEOF_LONG $ac_cv_sizeof_long |
EOF |
|
# Check whether --enable-readline or --disable-readline was given. |
if test "${enable_readline+set}" = set; then |
enableval="$enable_readline" |
|
echo "$as_me:3651: checking for add_history in -lreadline" >&5 |
echo "$as_me:4901: checking for add_history in -lreadline" >&5 |
echo $ECHO_N "checking for add_history in -lreadline... $ECHO_C" >&6 |
if test "${ac_cv_lib_readline_add_history+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
3656,7 → 4906,7
ac_check_lib_save_LIBS=$LIBS |
LIBS="-lreadline $LIBS" |
cat >conftest.$ac_ext <<_ACEOF |
#line 3659 "configure" |
#line 4909 "configure" |
#include "confdefs.h" |
|
/* Override any gcc2 internal prototype to avoid an error. */ |
3675,16 → 4925,16
} |
_ACEOF |
rm -f conftest.$ac_objext conftest$ac_exeext |
if { (eval echo "$as_me:3678: \"$ac_link\"") >&5 |
if { (eval echo "$as_me:4928: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:3681: \$? = $ac_status" >&5 |
echo "$as_me:4931: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest$ac_exeext' |
{ (eval echo "$as_me:3684: \"$ac_try\"") >&5 |
{ (eval echo "$as_me:4934: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:3687: \$? = $ac_status" >&5 |
echo "$as_me:4937: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_lib_readline_add_history=yes |
else |
3695,7 → 4945,7
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext |
LIBS=$ac_check_lib_save_LIBS |
fi |
echo "$as_me:3698: result: $ac_cv_lib_readline_add_history" >&5 |
echo "$as_me:4948: result: $ac_cv_lib_readline_add_history" >&5 |
echo "${ECHO_T}$ac_cv_lib_readline_add_history" >&6 |
if test $ac_cv_lib_readline_add_history = yes; then |
cat >>confdefs.h <<EOF |
3724,7 → 4974,7
solaris*) LIBS="-lsocket -lnsl" ;; |
esac |
|
echo "$as_me:3727: checking whether to enable profiling" >&5 |
echo "$as_me:4977: checking whether to enable profiling" >&5 |
echo $ECHO_N "checking whether to enable profiling... $ECHO_C" >&6 |
# Check whether --enable-profiling or --disable-profiling was given. |
if test "${enable_profiling+set}" = set; then |
3735,11 → 4985,11
esac |
|
fi; |
echo "$as_me:3738: result: ${enable_profiling-no}" >&5 |
echo "$as_me:4988: result: ${enable_profiling-no}" >&5 |
echo "${ECHO_T}${enable_profiling-no}" >&6 |
|
fast_sim="0" |
echo "$as_me:3742: checking whether to compile fsim" >&5 |
echo "$as_me:4992: checking whether to compile fsim" >&5 |
echo $ECHO_N "checking whether to compile fsim... $ECHO_C" >&6 |
# Check whether --enable-fsim or --disable-fsim was given. |
if test "${enable_fsim+set}" = set; then |
3751,11 → 5001,12
esac |
|
fi; |
echo "$as_me:3754: result: ${enable_fsim-no}" >&5 |
echo "$as_me:5004: result: ${enable_fsim-no}" >&5 |
echo "${ECHO_T}${enable_fsim-no}" >&6 |
|
simple_execution="0" |
echo "$as_me:3758: checking whether to use simple execution" >&5 |
INCLUDES="-I\${top_builddir}/cpu/$CPU_ARCH" |
echo "$as_me:5009: checking whether to use simple execution" >&5 |
echo $ECHO_N "checking whether to use simple execution... $ECHO_C" >&6 |
# Check whether --enable-simple or --disable-simple was given. |
if test "${enable_simple+set}" = set; then |
3762,16 → 5013,16
enableval="$enable_simple" |
|
case "$enableval" in |
no) simple_execution="0" ;; |
yes) simple_execution="1" ;; |
no) INCLUDES="-I\${top_builddir}/cpu/$CPU_ARCH" simple_execution="0" ;; |
yes) INCLUDES="-I\${top_srcdir}/cpu/$CPU_ARCH" simple_execution="1" ;; |
esac |
|
fi; |
echo "$as_me:3770: result: ${enable_simple-no}" >&5 |
echo "$as_me:5021: result: ${enable_simple-no}" >&5 |
echo "${ECHO_T}${enable_simple-no}" >&6 |
|
eth_phy="0" |
echo "$as_me:3774: checking whether to enable ethernet phy emulation" >&5 |
echo "$as_me:5025: checking whether to enable ethernet phy emulation" >&5 |
echo $ECHO_N "checking whether to enable ethernet phy emulation... $ECHO_C" >&6 |
# Check whether --enable-ethphy or --disable-ethphy was given. |
if test "${enable_ethphy+set}" = set; then |
3783,11 → 5034,11
esac |
|
fi; |
echo "$as_me:3786: result: ${enable_eth_phy-no}" >&5 |
echo "$as_me:5037: result: ${enable_eth_phy-no}" >&5 |
echo "${ECHO_T}${enable_eth_phy-no}" >&6 |
|
raw_range_stats="0" |
echo "$as_me:3790: checking whether to use raw range stats" >&5 |
echo "$as_me:5041: checking whether to use raw range stats" >&5 |
echo $ECHO_N "checking whether to use raw range stats... $ECHO_C" >&6 |
# Check whether --enable-range_stats or --disable-range_stats was given. |
if test "${enable_range_stats+set}" = set; then |
3799,11 → 5050,11
esac |
|
fi; |
echo "$as_me:3802: result: ${enable_range_stats-no}" >&5 |
echo "$as_me:5053: result: ${enable_range_stats-no}" >&5 |
echo "${ECHO_T}${enable_range_stats-no}" >&6 |
|
set_ov_flag="0" |
echo "$as_me:3806: checking whether instructions set overflow flag" >&5 |
echo "$as_me:5057: checking whether instructions set overflow flag" >&5 |
echo $ECHO_N "checking whether instructions set overflow flag... $ECHO_C" >&6 |
# Check whether --enable-ov_flag or --disable-ov_flag was given. |
if test "${enable_ov_flag+set}" = set; then |
3815,11 → 5066,11
esac |
|
fi; |
echo "$as_me:3818: result: ${enable_ov_flag-no}" >&5 |
echo "$as_me:5069: result: ${enable_ov_flag-no}" >&5 |
echo "${ECHO_T}${enable_ov_flag-no}" >&6 |
|
set_arith_flag="0" |
echo "$as_me:3822: checking whether arithmethic instructions set flag" >&5 |
echo "$as_me:5073: checking whether arithmethic instructions set flag" >&5 |
echo $ECHO_N "checking whether arithmethic instructions set flag... $ECHO_C" >&6 |
# Check whether --enable-arith_flag or --disable-arith_flag was given. |
if test "${enable_arith_flag+set}" = set; then |
3831,7 → 5082,7
esac |
|
fi; |
echo "$as_me:3834: result: ${enable_arith_flag-no}" >&5 |
echo "$as_me:5085: result: ${enable_arith_flag-no}" >&5 |
echo "${ECHO_T}${enable_arith_flag-no}" >&6 |
|
cat >>confdefs.h <<EOF |
3866,7 → 5117,7
SIMPLE_EXECUTION_FALSE= |
fi |
|
echo "$as_me:3869: checking for implementation-specific data" >&5 |
echo "$as_me:5120: checking for implementation-specific data" >&5 |
echo $ECHO_N "checking for implementation-specific data... $ECHO_C" >&6 |
# Check whether --enable-impl or --disable-impl was given. |
if test "${enable_impl+set}" = set; then |
3877,9 → 5128,9
mp3) IMPL="MP3" ;; |
bender) IMPL="BENDER" ;; |
*) |
echo "$as_me:3880: result: failed" >&5 |
echo "$as_me:5131: result: failed" >&5 |
echo "${ECHO_T}failed" >&6 |
{ { echo "$as_me:3882: error: bad --enable-impl option" >&5 |
{ { echo "$as_me:5133: error: bad --enable-impl option" >&5 |
echo "$as_me: error: bad --enable-impl option" >&2;} |
{ (exit 1); exit 1; }; } |
;; |
3886,11 → 5137,11
esac |
|
fi; |
echo "$as_me:3889: result: ${IMPL=DEFAULT}" >&5 |
echo "$as_me:5140: result: ${IMPL=DEFAULT}" >&5 |
echo "${ECHO_T}${IMPL=DEFAULT}" >&6 |
if test "$IMPL" = "DEFAULT" |
then |
{ echo "$as_me:3893: WARNING: using default environment" >&5 |
{ echo "$as_me:5144: WARNING: using default environment" >&5 |
echo "$as_me: WARNING: using default environment" >&2;} |
fi |
|
3908,14 → 5159,14
#define HAS_DEBUG 1 |
EOF |
|
INCLUDES="-I\${top_srcdir} -I\${top_srcdir}/cpu/common -I\${top_srcdir}/cpu/or1k \ |
-I\${top_srcdir}/cpu/$CPU_ARCH -I\${top_srcdir}/cache -I\${top_srcdir}/mmu \ |
INCLUDES="$INCLUDES -I\${top_srcdir} -I\${top_srcdir}/cpu/common \ |
-I\${top_srcdir}/cpu/or1k -I\${top_srcdir}/cache -I\${top_srcdir}/mmu \ |
-I\${top_srcdir}/bpb -I\${top_srcdir}/peripheral -I\${top_srcdir}/tick \ |
-I\${top_srcdir}/peripheral/channels \ |
-I\${top_srcdir}/pm -I\${top_srcdir}/pic -I\${top_srcdir}/debug \ |
-I\${top_srcdir}/vapi -I\${top_srcdir}/support -I\${top_srcdir}/cuc" |
-I\${top_srcdir}/peripheral/channels -I\${top_srcdir}/pm -I\${top_srcdir}/pic \ |
-I\${top_srcdir}/debug -I\${top_srcdir}/vapi -I\${top_srcdir}/support \ |
-I\${top_srcdir}/cuc -I\${top_srcdir}/port" |
|
ac_config_files="$ac_config_files Makefile bpb/Makefile cache/Makefile cpu/Makefile cpu/common/Makefile cpu/or32/Makefile cuc/Makefile cpu/or1k/Makefile cpu/dlx/Makefile debug/Makefile support/Makefile mmu/Makefile peripheral/Makefile tick/Makefile peripheral/channels/Makefile pm/Makefile pic/Makefile vapi/Makefile extras/Makefile" |
ac_config_files="$ac_config_files Makefile bpb/Makefile cache/Makefile cpu/Makefile cpu/common/Makefile cpu/or32/Makefile cuc/Makefile cpu/or1k/Makefile cpu/dlx/Makefile debug/Makefile support/Makefile mmu/Makefile peripheral/Makefile tick/Makefile peripheral/channels/Makefile pm/Makefile pic/Makefile vapi/Makefile port/Makefile" |
ac_config_commands="$ac_config_commands default" |
cat >confcache <<\_ACEOF |
# This file is a shell script that caches the results of configure |
3994,7 → 5245,7
DEFS=-DHAVE_CONFIG_H |
|
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then |
{ { echo "$as_me:3997: error: conditional \"AMDEP\" was never defined. |
{ { echo "$as_me:5248: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
echo "$as_me: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
4001,7 → 5252,7
{ (exit 1); exit 1; }; } |
fi |
if test -z "${SIMPLE_EXECUTION_TRUE}" && test -z "${SIMPLE_EXECUTION_FALSE}"; then |
{ { echo "$as_me:4004: error: conditional \"SIMPLE_EXECUTION\" was never defined. |
{ { echo "$as_me:5255: error: conditional \"SIMPLE_EXECUTION\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
echo "$as_me: error: conditional \"SIMPLE_EXECUTION\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
4011,7 → 5262,7
: ${CONFIG_STATUS=./config.status} |
ac_clean_files_save=$ac_clean_files |
ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
{ echo "$as_me:4014: creating $CONFIG_STATUS" >&5 |
{ echo "$as_me:5265: creating $CONFIG_STATUS" >&5 |
echo "$as_me: creating $CONFIG_STATUS" >&6;} |
cat >$CONFIG_STATUS <<_ACEOF |
#! $SHELL |
4187,7 → 5438,7
echo "$ac_cs_version"; exit 0 ;; |
--he | --h) |
# Conflict between --help and --header |
{ { echo "$as_me:4190: error: ambiguous option: $1 |
{ { echo "$as_me:5441: error: ambiguous option: $1 |
Try \`$0 --help' for more information." >&5 |
echo "$as_me: error: ambiguous option: $1 |
Try \`$0 --help' for more information." >&2;} |
4206,7 → 5457,7
ac_need_defaults=false;; |
|
# This is an error. |
-*) { { echo "$as_me:4209: error: unrecognized option: $1 |
-*) { { echo "$as_me:5460: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&5 |
echo "$as_me: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&2;} |
4268,11 → 5519,11
"pm/Makefile" ) CONFIG_FILES="$CONFIG_FILES pm/Makefile" ;; |
"pic/Makefile" ) CONFIG_FILES="$CONFIG_FILES pic/Makefile" ;; |
"vapi/Makefile" ) CONFIG_FILES="$CONFIG_FILES vapi/Makefile" ;; |
"extras/Makefile" ) CONFIG_FILES="$CONFIG_FILES extras/Makefile" ;; |
"port/Makefile" ) CONFIG_FILES="$CONFIG_FILES port/Makefile" ;; |
"depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
"default" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default" ;; |
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; |
*) { { echo "$as_me:4275: error: invalid argument: $ac_config_target" >&5 |
*) { { echo "$as_me:5526: error: invalid argument: $ac_config_target" >&5 |
echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
4407,7 → 5658,6
s,@SIMPLE_EXECUTION_FALSE@,$SIMPLE_EXECUTION_FALSE,;t t |
s,@BUILD_DIR@,$BUILD_DIR,;t t |
s,@LOCAL_CFLAGS@,$LOCAL_CFLAGS,;t t |
s,@LOCAL_LDFLAGS@,$LOCAL_LDFLAGS,;t t |
s,@LOCAL_DEFS@,$LOCAL_DEFS,;t t |
s,@ARFLAGS@,$ARFLAGS,;t t |
s,@SUMVERSION@,$SUMVERSION,;t t |
4527,7 → 5777,7
esac |
|
if test x"$ac_file" != x-; then |
{ echo "$as_me:4530: creating $ac_file" >&5 |
{ echo "$as_me:5780: creating $ac_file" >&5 |
echo "$as_me: creating $ac_file" >&6;} |
rm -f "$ac_file" |
fi |
4545,7 → 5795,7
-) echo $tmp/stdin ;; |
[\\/$]*) |
# Absolute (can't be DOS-style, as IFS=:) |
test -f "$f" || { { echo "$as_me:4548: error: cannot find input file: $f" >&5 |
test -f "$f" || { { echo "$as_me:5798: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
echo $f;; |
4558,7 → 5808,7
echo $srcdir/$f |
else |
# /dev/null tree |
{ { echo "$as_me:4561: error: cannot find input file: $f" >&5 |
{ { echo "$as_me:5811: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
fi;; |
4619,7 → 5869,7
* ) ac_file_in=$ac_file.in ;; |
esac |
|
test x"$ac_file" != x- && { echo "$as_me:4622: creating $ac_file" >&5 |
test x"$ac_file" != x- && { echo "$as_me:5872: creating $ac_file" >&5 |
echo "$as_me: creating $ac_file" >&6;} |
|
# First look for the input files in the build tree, otherwise in the |
4630,7 → 5880,7
-) echo $tmp/stdin ;; |
[\\/$]*) |
# Absolute (can't be DOS-style, as IFS=:) |
test -f "$f" || { { echo "$as_me:4633: error: cannot find input file: $f" >&5 |
test -f "$f" || { { echo "$as_me:5883: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
echo $f;; |
4643,7 → 5893,7
echo $srcdir/$f |
else |
# /dev/null tree |
{ { echo "$as_me:4646: error: cannot find input file: $f" >&5 |
{ { echo "$as_me:5896: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
fi;; |
4760,7 → 6010,7
rm -f $tmp/in |
if test x"$ac_file" != x-; then |
if cmp -s $ac_file $tmp/config.h 2>/dev/null; then |
{ echo "$as_me:4763: $ac_file is unchanged" >&5 |
{ echo "$as_me:6013: $ac_file is unchanged" >&5 |
echo "$as_me: $ac_file is unchanged" >&6;} |
else |
ac_dir=`$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
4820,7 → 6070,13
depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
# Strip MF so we end up with the name of the file. |
mf=`echo "$mf" | sed -e 's/:.*$//'` |
if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then |
# Check whether this is an Automake generated Makefile or not. |
# We used to match only the files named `Makefile.in', but |
# some people rename them; so instead we look at the file content. |
# Grep'ing the first line is not enough: some people post-process |
# each Makefile.in and add a new line on top of each file to say so. |
# So let's grep whole file. |
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then |
dirpart=`$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$mf" : 'X\(//\)[^/]' \| \ |
X"$mf" : 'X\(//\)$' \| \ |
/branches/stable_0_1_x/or1ksim/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
55,6 → 55,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
87,7 → 88,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
102,12 → 102,12
host_os = @host_os@ |
install_sh = @install_sh@ |
|
SUBDIRS = cpu bpb support cache mmu peripheral tick pm pic debug vapi cuc extras |
SUBDIRS = cpu bpb support cache mmu peripheral tick pm pic debug vapi cuc port |
|
bin_PROGRAMS = sim |
|
sim_SOURCES = toplevel.c sim-config.c sim-config.h profiler.c \ |
mprofiler.c profiler.h mprofiler.h |
mprofiler.c profiler.h mprofiler.h sim-cmd.c |
|
sim_LDADD = cpu/common/libcommon.a cpu/$(CPU_ARCH)/libarch.a \ |
cpu/or1k/libor1k.a support/libsupport.a mmu/libmmu.a \ |
114,7 → 114,7
bpb/libbpb.a cache/libcache.a peripheral/libperipheral.a \ |
peripheral/channels/libchannels.a \ |
tick/libtick.a pm/libpm.a pic/libpic.a debug/libdebug.a \ |
vapi/libvapi.a cuc/libcuc.a extras/libextras.a |
vapi/libvapi.a cuc/libcuc.a port/libport.a |
|
|
sim_LDFLAGS = -lm #-lreadline |
127,7 → 127,7
PROGRAMS = $(bin_PROGRAMS) |
|
am_sim_OBJECTS = toplevel.$(OBJEXT) sim-config.$(OBJEXT) \ |
profiler.$(OBJEXT) mprofiler.$(OBJEXT) |
profiler.$(OBJEXT) mprofiler.$(OBJEXT) sim-cmd.$(OBJEXT) |
sim_OBJECTS = $(am_sim_OBJECTS) |
sim_DEPENDENCIES = cpu/common/libcommon.a cpu/$(CPU_ARCH)/libarch.a \ |
cpu/or1k/libor1k.a support/libsupport.a mmu/libmmu.a \ |
134,7 → 134,7
bpb/libbpb.a cache/libcache.a peripheral/libperipheral.a \ |
peripheral/channels/libchannels.a tick/libtick.a pm/libpm.a \ |
pic/libpic.a debug/libdebug.a vapi/libvapi.a cuc/libcuc.a \ |
extras/libextras.a |
port/libport.a |
|
DEFS = @DEFS@ |
DEFAULT_INCLUDES = -I. -I$(srcdir) -I. |
144,7 → 144,8
depcomp = $(SHELL) $(top_srcdir)/depcomp |
am__depfiles_maybe = depfiles |
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/mprofiler.Po ./$(DEPDIR)/profiler.Po \ |
@AMDEP_TRUE@ ./$(DEPDIR)/sim-config.Po ./$(DEPDIR)/toplevel.Po |
@AMDEP_TRUE@ ./$(DEPDIR)/sim-cmd.Po ./$(DEPDIR)/sim-config.Po \ |
@AMDEP_TRUE@ ./$(DEPDIR)/toplevel.Po |
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
CCLD = $(CC) |
167,6 → 168,9
|
.SUFFIXES: |
.SUFFIXES: .c .o .obj |
|
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
configure.lineno |
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
cd $(top_srcdir) && \ |
$(AUTOMAKE) --gnu Makefile |
196,7 → 200,7
touch $(srcdir)/config.h.in |
|
distclean-hdr: |
-rm -f config.h |
-rm -f config.h stamp-h1 |
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) |
install-binPROGRAMS: $(bin_PROGRAMS) |
@$(NORMAL_INSTALL) |
205,8 → 209,7
p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ |
if test -f $$p \ |
; then \ |
p1=`echo "$$p1" | sed -e 's,^.*/,,'`; \ |
f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \ |
f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ |
echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ |
$(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ |
else :; fi; \ |
215,8 → 218,7
uninstall-binPROGRAMS: |
@$(NORMAL_UNINSTALL) |
@list='$(bin_PROGRAMS)'; for p in $$list; do \ |
f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ |
f=`echo "$$f" | sed -e 's,^.*/,,'`; \ |
f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ |
echo " rm -f $(DESTDIR)$(bindir)/$$f"; \ |
rm -f $(DESTDIR)$(bindir)/$$f; \ |
done |
235,6 → 237,7
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mprofiler.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/profiler.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sim-cmd.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sim-config.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/toplevel.Po@am__quote@ |
|
245,7 → 248,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
262,7 → 265,7
# (which will cause the Makefiles to be regenerated when you run `make'); |
# (2) otherwise, pass the desired values on the `make' command line. |
$(RECURSIVE_TARGETS): |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
target=`echo $@ | sed s/-recursive//`; \ |
list='$(SUBDIRS)'; for subdir in $$list; do \ |
282,7 → 285,7
|
mostlyclean-recursive clean-recursive distclean-recursive \ |
maintainer-clean-recursive: |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
case "$@" in \ |
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
366,7 → 369,7
distdir: $(DISTFILES) |
$(am__remove_distdir) |
mkdir $(distdir) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
376,8 → 379,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
475,7 → 480,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
485,7 → 490,7
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am |
|
distclean: distclean-recursive |
-rm -f config.status config.cache config.log |
-rm -f $(am__CONFIG_DISTCLEAN_FILES) |
distclean-am: clean-am distclean-compile distclean-depend \ |
distclean-generic distclean-hdr distclean-tags |
|
508,7 → 513,8
installcheck-am: |
|
maintainer-clean: maintainer-clean-recursive |
|
-rm -f $(am__CONFIG_DISTCLEAN_FILES) |
-rm -rf autom4te.cache |
maintainer-clean-am: distclean-am maintainer-clean-generic |
|
mostlyclean: mostlyclean-recursive |
/branches/stable_0_1_x/or1ksim/port/Makefile.in
0,0 → 1,332
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
# Free Software Foundation, Inc. |
# This Makefile.in is free software; the Free Software Foundation |
# gives unlimited permission to copy and/or distribute it, |
# with or without modifications, as long as this notice is preserved. |
|
# This program is distributed in the hope that it will be useful, |
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
# PARTICULAR PURPOSE. |
|
@SET_MAKE@ |
|
# Makefile -- Makefile for cpu architecture independent simulation |
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org |
# |
# This file is part of OpenRISC 1000 Architectural Simulator. |
# |
# This program is free software; you can redistribute it and/or modify |
# it under the terms of the GNU General Public License as published by |
# the Free Software Foundation; either version 2 of the License, or |
# (at your option) any later version. |
# |
# This program is distributed in the hope that it will be useful, |
# but WITHOUT ANY WARRANTY; without even the implied warranty of |
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
# GNU General Public License for more details. |
# |
# You should have received a copy of the GNU General Public License |
# along with this program; if not, write to the Free Software |
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
# |
SHELL = @SHELL@ |
|
srcdir = @srcdir@ |
top_srcdir = @top_srcdir@ |
VPATH = @srcdir@ |
prefix = @prefix@ |
exec_prefix = @exec_prefix@ |
|
bindir = @bindir@ |
sbindir = @sbindir@ |
libexecdir = @libexecdir@ |
datadir = @datadir@ |
sysconfdir = @sysconfdir@ |
sharedstatedir = @sharedstatedir@ |
localstatedir = @localstatedir@ |
libdir = @libdir@ |
infodir = @infodir@ |
mandir = @mandir@ |
includedir = @includedir@ |
oldincludedir = /usr/include |
pkgdatadir = $(datadir)/@PACKAGE@ |
pkglibdir = $(libdir)/@PACKAGE@ |
pkgincludedir = $(includedir)/@PACKAGE@ |
top_builddir = .. |
|
ACLOCAL = @ACLOCAL@ |
AUTOCONF = @AUTOCONF@ |
AUTOMAKE = @AUTOMAKE@ |
AUTOHEADER = @AUTOHEADER@ |
|
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
INSTALL = @INSTALL@ |
INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
NORMAL_INSTALL = : |
PRE_INSTALL = : |
POST_INSTALL = : |
NORMAL_UNINSTALL = : |
PRE_UNINSTALL = : |
POST_UNINSTALL = : |
build_alias = @build_alias@ |
build_triplet = @build@ |
host_alias = @host_alias@ |
host_triplet = @host@ |
target_alias = @target_alias@ |
target_triplet = @target@ |
|
EXEEXT = @EXEEXT@ |
OBJEXT = @OBJEXT@ |
PATH_SEPARATOR = @PATH_SEPARATOR@ |
AMTAR = @AMTAR@ |
AR = @AR@ |
ARFLAGS = @ARFLAGS@ |
AWK = @AWK@ |
BUILD_DIR = @BUILD_DIR@ |
CC = @CC@ |
CFLAGS = @CFLAGS@ |
CPU_ARCH = @CPU_ARCH@ |
DEPDIR = @DEPDIR@ |
INCLUDES = @INCLUDES@ |
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
STRIP = @STRIP@ |
SUMVERSION = @SUMVERSION@ |
TERMCAP_LIB = @TERMCAP_LIB@ |
VERSION = @VERSION@ |
am__include = @am__include@ |
am__quote = @am__quote@ |
host = @host@ |
host_cpu = @host_cpu@ |
host_os = @host_os@ |
install_sh = @install_sh@ |
|
noinst_LIBRARIES = libport.a |
libport_a_SOURCES = strndup.c isblank.c |
subdir = port |
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
CONFIG_HEADER = $(top_builddir)/config.h |
CONFIG_CLEAN_FILES = |
LIBRARIES = $(noinst_LIBRARIES) |
|
libport_a_AR = $(AR) cru |
libport_a_LIBADD = |
am_libport_a_OBJECTS = strndup.$(OBJEXT) isblank.$(OBJEXT) |
libport_a_OBJECTS = $(am_libport_a_OBJECTS) |
|
DEFS = @DEFS@ |
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) |
CPPFLAGS = @CPPFLAGS@ |
LDFLAGS = @LDFLAGS@ |
LIBS = @LIBS@ |
depcomp = $(SHELL) $(top_srcdir)/depcomp |
am__depfiles_maybe = depfiles |
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/isblank.Po ./$(DEPDIR)/strndup.Po |
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
CCLD = $(CC) |
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
DIST_SOURCES = $(libport_a_SOURCES) |
DIST_COMMON = Makefile.am Makefile.in |
SOURCES = $(libport_a_SOURCES) |
|
all: all-am |
|
.SUFFIXES: |
.SUFFIXES: .c .o .obj |
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) |
cd $(top_srcdir) && \ |
$(AUTOMAKE) --gnu port/Makefile |
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) |
|
clean-noinstLIBRARIES: |
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) |
libport.a: $(libport_a_OBJECTS) $(libport_a_DEPENDENCIES) |
-rm -f libport.a |
$(libport_a_AR) libport.a $(libport_a_OBJECTS) $(libport_a_LIBADD) |
$(RANLIB) libport.a |
|
mostlyclean-compile: |
-rm -f *.$(OBJEXT) core *.core |
|
distclean-compile: |
-rm -f *.tab.c |
|
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/isblank.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strndup.Po@am__quote@ |
|
distclean-depend: |
-rm -rf ./$(DEPDIR) |
|
.c.o: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `cygpath -w $<` |
CCDEPMODE = @CCDEPMODE@ |
uninstall-info-am: |
|
ETAGS = etags |
ETAGSFLAGS = |
|
tags: TAGS |
|
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
unique=`for i in $$list; do \ |
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
done | \ |
$(AWK) ' { files[$$0] = 1; } \ |
END { for (i in files) print i; }'`; \ |
mkid -fID $$unique |
|
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
$(TAGS_FILES) $(LISP) |
tags=; \ |
here=`pwd`; \ |
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
unique=`for i in $$list; do \ |
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
done | \ |
$(AWK) ' { files[$$0] = 1; } \ |
END { for (i in files) print i; }'`; \ |
test -z "$(ETAGS_ARGS)$$tags$$unique" \ |
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
$$tags $$unique |
|
GTAGS: |
here=`$(am__cd) $(top_builddir) && pwd` \ |
&& cd $(top_srcdir) \ |
&& gtags -i $(GTAGS_ARGS) $$here |
|
distclean-tags: |
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH |
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
|
top_distdir = .. |
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
dir="/$$dir"; \ |
$(mkinstalldirs) "$(distdir)$$dir"; \ |
else \ |
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
|| exit 1; \ |
fi; \ |
done |
check-am: all-am |
check: check-am |
all-am: Makefile $(LIBRARIES) |
|
installdirs: |
|
install: install-am |
install-exec: install-exec-am |
install-data: install-data-am |
uninstall: uninstall-am |
|
install-am: all-am |
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
|
installcheck: installcheck-am |
install-strip: |
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
INSTALL_STRIP_FLAG=-s \ |
`test -z '$(STRIP)' || \ |
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
mostlyclean-generic: |
|
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
@echo "it deletes files that may require special tools to rebuild." |
clean: clean-am |
|
clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am |
|
distclean: distclean-am |
|
distclean-am: clean-am distclean-compile distclean-depend \ |
distclean-generic distclean-tags |
|
dvi: dvi-am |
|
dvi-am: |
|
info: info-am |
|
info-am: |
|
install-data-am: |
|
install-exec-am: |
|
install-info: install-info-am |
|
install-man: |
|
installcheck-am: |
|
maintainer-clean: maintainer-clean-am |
|
maintainer-clean-am: distclean-am maintainer-clean-generic |
|
mostlyclean: mostlyclean-am |
|
mostlyclean-am: mostlyclean-compile mostlyclean-generic |
|
uninstall-am: uninstall-info-am |
|
.PHONY: GTAGS all all-am check check-am clean clean-generic \ |
clean-noinstLIBRARIES distclean distclean-compile \ |
distclean-depend distclean-generic distclean-tags distdir dvi \ |
dvi-am info info-am install install-am install-data \ |
install-data-am install-exec install-exec-am install-info \ |
install-info-am install-man install-strip installcheck \ |
installcheck-am installdirs maintainer-clean \ |
maintainer-clean-generic mostlyclean mostlyclean-compile \ |
mostlyclean-generic tags uninstall uninstall-am \ |
uninstall-info-am |
|
# Tell versions [3.59,3.63) of GNU make to not export all variables. |
# Otherwise a system limit (for SysV at least) may be exceeded. |
.NOEXPORT: |
/branches/stable_0_1_x/or1ksim/debug/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
178,7 → 178,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
229,7 → 229,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
239,8 → 239,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
272,7 → 274,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cpu/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
53,6 → 53,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
85,7 → 86,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
130,7 → 130,7
# (which will cause the Makefiles to be regenerated when you run `make'); |
# (2) otherwise, pass the desired values on the `make' command line. |
$(RECURSIVE_TARGETS): |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
target=`echo $@ | sed s/-recursive//`; \ |
list='$(SUBDIRS)'; for subdir in $$list; do \ |
150,7 → 150,7
|
mostlyclean-recursive clean-recursive distclean-recursive \ |
maintainer-clean-recursive: |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
case "$@" in \ |
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
224,7 → 224,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
234,8 → 234,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
280,7 → 282,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cpu/or32/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
124,6 → 124,10
@SIMPLE_EXECUTION_TRUE@generate_SOURCES = |
@SIMPLE_EXECUTION_FALSE@generate_SOURCES = or32.c generate.c |
@SIMPLE_EXECUTION_FALSE@BUILT_SOURCES = execgen.c |
|
# If the simulator was first built without --enable-simple and then with it, |
# then also remove these two files |
CLEANFILES = execgen.c generate |
subdir = cpu/or32 |
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
CONFIG_HEADER = $(top_builddir)/config.h |
204,7 → 208,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
255,7 → 259,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
265,8 → 269,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
296,9 → 302,10
mostlyclean-generic: |
|
clean-generic: |
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
354,8 → 361,8
uninstall-am uninstall-info-am |
|
|
@SIMPLE_EXECUTION_FALSE@execgen.c: generate insnset.c |
@SIMPLE_EXECUTION_FALSE@ ./generate insnset.c execgen.c |
@SIMPLE_EXECUTION_FALSE@execgen.c: generate $(srcdir)/insnset.c |
@SIMPLE_EXECUTION_FALSE@ ./generate $(srcdir)/insnset.c execgen.c |
# Tell versions [3.59,3.63) of GNU make to not export all variables. |
# Otherwise a system limit (for SysV at least) may be exceeded. |
.NOEXPORT: |
/branches/stable_0_1_x/or1ksim/cpu/dlx/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
177,7 → 177,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
228,7 → 228,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
238,8 → 238,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
271,7 → 273,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cpu/common/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
184,7 → 184,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
235,7 → 235,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
245,8 → 245,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
278,7 → 280,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cpu/or1k/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
178,7 → 178,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
229,7 → 229,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
239,8 → 239,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
272,7 → 274,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/tick/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
177,7 → 177,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
228,7 → 228,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
238,8 → 238,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
271,7 → 273,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cache/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
179,7 → 179,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
230,7 → 230,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
240,8 → 240,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
273,7 → 275,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/cuc/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
192,7 → 192,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
243,7 → 243,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
253,8 → 253,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
286,7 → 288,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/pic/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
177,7 → 177,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
228,7 → 228,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
238,8 → 238,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
271,7 → 273,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/pm/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
177,7 → 177,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
228,7 → 228,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
238,8 → 238,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
271,7 → 273,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/peripheral/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
220,7 → 220,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
237,7 → 237,7
# (which will cause the Makefiles to be regenerated when you run `make'); |
# (2) otherwise, pass the desired values on the `make' command line. |
$(RECURSIVE_TARGETS): |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
target=`echo $@ | sed s/-recursive//`; \ |
list='$(SUBDIRS)'; for subdir in $$list; do \ |
257,7 → 257,7
|
mostlyclean-recursive clean-recursive distclean-recursive \ |
maintainer-clean-recursive: |
@set fnord $(MAKEFLAGS); amf=$$2; \ |
@set fnord $$MAKEFLAGS; amf=$$2; \ |
dot_seen=no; \ |
case "$@" in \ |
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
331,7 → 331,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
341,8 → 341,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
387,7 → 389,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/peripheral/channels/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
195,7 → 195,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
246,7 → 246,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
256,8 → 256,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
289,7 → 291,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/mmu/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
178,7 → 178,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
229,7 → 229,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
239,8 → 239,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
272,7 → 274,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/bpb/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
177,7 → 177,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
228,7 → 228,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
238,8 → 238,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
271,7 → 273,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/support/Makefile.in
1,4 → 1,4
# Makefile.in generated by automake 1.6 from Makefile.am. |
# Makefile.in generated by automake 1.6.3 from Makefile.am. |
# @configure_input@ |
|
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
69,6 → 69,7
INSTALL_DATA = @INSTALL_DATA@ |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = @program_transform_name@ |
101,7 → 102,6
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LOCAL_CFLAGS = @LOCAL_CFLAGS@ |
LOCAL_DEFS = @LOCAL_DEFS@ |
LOCAL_LDFLAGS = @LOCAL_LDFLAGS@ |
MAKE_SHELL = @MAKE_SHELL@ |
PACKAGE = @PACKAGE@ |
RANLIB = @RANLIB@ |
183,7 → 183,7
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ |
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$< |
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< |
|
.c.obj: |
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
234,7 → 234,7
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) |
|
distdir: $(DISTFILES) |
@for file in $(DISTFILES); do \ |
@list='$(DISTFILES)'; for file in $$list; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
244,8 → 244,10
dir=''; \ |
fi; \ |
if test -d $$d/$$file; then \ |
cp -pR $$d/$$file $(distdir)$$dir \ |
|| exit 1; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
fi; \ |
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
else \ |
test -f $(distdir)/$$file \ |
|| cp -p $$d/$$file $(distdir)/$$file \ |
277,7 → 279,7
clean-generic: |
|
distclean-generic: |
-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]* |
-rm -f Makefile $(CONFIG_CLEAN_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
/branches/stable_0_1_x/or1ksim/aclocal.m4
1,4 → 1,4
# aclocal.m4 generated automatically by aclocal 1.6 -*- Autoconf -*- |
# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*- |
|
# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 |
# Free Software Foundation, Inc. |
86,9 → 86,9
# Some tools Automake needs. |
AC_REQUIRE([AM_SANITY_CHECK])dnl |
AC_REQUIRE([AC_ARG_PROGRAM])dnl |
AM_MISSING_PROG(ACLOCAL, "aclocal-${am__api_version}") |
AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) |
AM_MISSING_PROG(AUTOCONF, autoconf) |
AM_MISSING_PROG(AUTOMAKE, "automake-${am__api_version}") |
AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) |
AM_MISSING_PROG(AUTOHEADER, autoheader) |
AM_MISSING_PROG(MAKEINFO, makeinfo) |
AM_MISSING_PROG(AMTAR, tar) |
138,7 → 138,7
# Call AM_AUTOMAKE_VERSION so it can be traced. |
# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. |
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], |
[AM_AUTOMAKE_VERSION([1.6])]) |
[AM_AUTOMAKE_VERSION([1.6.3])]) |
|
# Helper functions for option handling. -*- Autoconf -*- |
|
470,7 → 470,7
|
ifelse([$1], CC, [depcc="$CC" am_compiler_list=], |
[$1], CXX, [depcc="$CXX" am_compiler_list=], |
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'] |
[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], |
[$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], |
[depcc="$$1" am_compiler_list=]) |
|
595,7 → 595,13
[for mf in $CONFIG_FILES; do |
# Strip MF so we end up with the name of the file. |
mf=`echo "$mf" | sed -e 's/:.*$//'` |
if (sed 1q $mf | fgrep 'generated by automake') > /dev/null 2>&1; then |
# Check whether this is an Automake generated Makefile or not. |
# We used to match only the files named `Makefile.in', but |
# some people rename them; so instead we look at the file content. |
# Grep'ing the first line is not enough: some people post-process |
# each Makefile.in and add a new line on top of each file to say so. |
# So let's grep whole file. |
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then |
dirpart=`AS_DIRNAME("$mf")` |
else |
continue |