OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /
    from Rev 1743 to Rev 1744
    ↔ Reverse comparison
  •

Rev 1743 → Rev 1744

/trunk/or1ksim/port/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libport_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 69,7
libport_a_LIBADD =
am_libport_a_OBJECTS = strndup.$(OBJEXT) isblank.$(OBJEXT)
libport_a_OBJECTS = $(am_libport_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,8 → 187,10
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libport.a
libport_a_SOURCES = strndup.c isblank.c
libport_a_SOURCES = strndup.c isblank.c port.h
all: all-am
 
.SUFFIXES:
238,19 → 242,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strndup.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
257,8 → 260,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
270,8 → 273,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
281,13 → 284,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
301,22 → 303,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
377,12 → 378,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
402,18 → 411,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/port/Makefile.am
1,22 → 1,25
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libport.a
libport_a_SOURCES = strndup.c isblank.c
libport_a_SOURCES = strndup.c isblank.c port.h
/trunk/or1ksim/debug/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
34,17 → 34,11
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
 
SOURCES = $(libdebug_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 67,7
libdebug_a_LIBADD =
am_libdebug_a_OBJECTS = debug_unit.$(OBJEXT) gdbcomm.$(OBJEXT)
libdebug_a_OBJECTS = $(am_libdebug_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 80,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 97,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 118,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 134,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 150,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 161,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,6 → 185,8
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libdebug.a
libdebug_a_SOURCES = debug_unit.c debug_unit.h gdbcomm.c gdbcomm.h
all: all-am
238,19 → 240,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gdbcomm.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
257,8 → 258,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
270,8 → 271,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
281,13 → 282,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
301,22 → 301,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
377,12 → 376,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
402,18 → 409,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/debug/debug_unit.c
1,22 → 1,26
/* debug_unit.c -- Simulation of Or1k debug unit
 
Copyright (C) 2001 Chris Ziomkowski, chris@asics.ws
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/*
This is an architectural level simulation of the Or1k debug
unit as described in OpenRISC 1000 System Architecture Manual,
30,6 → 34,7
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#include <assert.h>
 
#include "config.h"
 
59,9 → 64,6
/* External STALL signal to debug interface */
int in_reset = 0;
 
/* Current watchpoint state */
unsigned long watchpoints = 0;
 
static int calculate_watchpoints(DebugUnitAction action, unsigned long udata);
 
void set_stall_state(int state)
72,8 → 74,6
#endif
development.riscop &= ~RISCOP_STALL;
development.riscop |= state ? RISCOP_STALL : 0;
if(cpu_state.sprs[SPR_DMR1] & SPR_DMR1_DXFW) /* If debugger disabled */
state = 0;
runtime.cpu.stalled = state;
}
 
83,11 → 83,16
set_stall_state (0);
}
 
/* JPB: Called before each clock cycle. Used to reset the watchpoint status,
but that is now obsolete, so does nothing */
void du_clock(void)
{
watchpoints=0;
};
return;
}
 
/* Check for a breakpoint on this action. NOTE this does not include
single-stepping - that will be picked up in the main loop AFTER the
instruction has executed. */
int CheckDebugUnit(DebugUnitAction action, unsigned long udata)
{
/* Do not stop, if we have debug module disabled or during reset */
94,10 → 99,6
if(!config.debug.enabled || in_reset)
return 0;
/* If we're single stepping, always stop */
if((action == DebugInstructionFetch) && (cpu_state.sprs[SPR_DMR1] & SPR_DMR1_ST))
return 1;
 
/* is any watchpoint enabled to generate a break or count? If not, ignore */
if(cpu_state.sprs[SPR_DMR2] & (SPR_DMR2_WGB | SPR_DMR2_AWTC))
return calculate_watchpoints(action, udata);
105,118 → 106,285
return 0;
}
 
/* Checks whether we should stall the RISC or cause an exception */
/* Checks whether we should stall the RISC or cause an exception. Rewritten
by JPB for current architecture. Return true if this should generate a
breakpoint */
static int calculate_watchpoints(DebugUnitAction action, unsigned long udata)
{
int breakpoint = 0;
int i, bit;
int i;
int match_found = 0; /* Flag if we found any matchpoint */
int breakpoint_found; /* Flag if we found any breakpoint */
 
/* Hopefully this loop would be unrolled run at max. speed */
for(i = 0, bit = 1; i < 11; i++, bit <<= 1) {
int chain1, chain2;
int match = 0;
int DCR_hit = 0;
/* Debug registers */
unsigned long dmr1;
unsigned long dmr2;
 
/* Calculate first 8 matchpoints, result is put into DCR_hit */
if (i < 8) {
unsigned long dcr = cpu_state.sprs[SPR_DCR(i)];
unsigned long dcr_ct = dcr & SPR_DCR_CT; /* the CT field alone */
/* Is this matchpoint a propos for the current action? */
if ( ((dcr & SPR_DCR_DP) && dcr_ct) && /* DVR/DCP pair present */
(((action==DebugInstructionFetch) && (dcr_ct == SPR_DCR_CT_IFEA)) ||
((action==DebugLoadAddress) && ((dcr_ct == SPR_DCR_CT_LEA) ||
(dcr_ct == SPR_DCR_CT_LSEA))) ||
((action==DebugStoreAddress) && ((dcr_ct == SPR_DCR_CT_SEA) ||
(dcr_ct == SPR_DCR_CT_LSEA))) ||
((action==DebugLoadData) && ((dcr_ct == SPR_DCR_CT_LD) ||
(dcr_ct == SPR_DCR_CT_LSD))) ||
((action==DebugStoreData) && ((dcr_ct == SPR_DCR_CT_SD) ||
(dcr_ct == SPR_DCR_CT_LSD)))) ) {
unsigned long op1 = udata;
unsigned long op2 = cpu_state.sprs[SPR_DVR(i)];
/* Perform signed comparison? */
if (dcr & SPR_DCR_SC) {
long sop1 = op1, sop2 = op2; /* Convert to signed */
switch(dcr & SPR_DCR_CC) {
case SPR_DCR_CC_MASKED: DCR_hit = sop1 & sop2; break;
case SPR_DCR_CC_EQUAL: DCR_hit = sop1 == sop2; break;
case SPR_DCR_CC_NEQUAL: DCR_hit = sop1 != sop2; break;
case SPR_DCR_CC_LESS: DCR_hit = sop1 < sop2; break;
case SPR_DCR_CC_LESSE: DCR_hit = sop1 <= sop2; break;
case SPR_DCR_CC_GREAT: DCR_hit = sop1 > sop2; break;
case SPR_DCR_CC_GREATE: DCR_hit = sop1 >= sop2; break;
}
} else {
switch(dcr & SPR_DCR_CC) {
case SPR_DCR_CC_MASKED: DCR_hit = op1 & op2; break;
case SPR_DCR_CC_EQUAL: DCR_hit = op1 == op2; break;
case SPR_DCR_CC_NEQUAL: DCR_hit = op1 != op2; break;
case SPR_DCR_CC_LESS: DCR_hit = op1 < op2; break;
case SPR_DCR_CC_LESSE: DCR_hit = op1 <= op2; break;
case SPR_DCR_CC_GREAT: DCR_hit = op1 > op2; break;
case SPR_DCR_CC_GREATE: DCR_hit = op1 >= op2; break;
}
}
}
/* Debug bit fields */
unsigned char dmr2_wce0;
unsigned char dmr2_wce1;
unsigned char counter0_enabled;
unsigned char counter1_enabled;
unsigned char counter0_matched;
unsigned char counter1_matched;
unsigned short counter0;
unsigned short counter1;
 
unsigned char mp[MAX_MATCHPOINTS]; /* Which matchpoints matched */
unsigned char wp[MAX_WATCHPOINTS]; /* Which watchpoints matched */
 
memset( mp, sizeof( mp ), 0 );
memset( wp, sizeof( wp ), 0 );
 
/* First find the matchpoints */
 
for( i = 0; i < MAX_MATCHPOINTS; i++ ) {
unsigned long dcr = cpu_state.sprs[SPR_DCR(i)];
unsigned char dcr_dp = dcr & SPR_DCR_DP;
unsigned char dcr_cc;
unsigned char dcr_sc;
unsigned char dcr_ct;
int match_so_far;
 
if( SPR_DCR_DP != dcr_dp ) {
continue;
}
 
/* Chain matchpoints */
switch(i) {
case 0:
chain1 = chain2 = DCR_hit;
dcr_ct = dcr & SPR_DCR_CT;
match_so_far = 0;
 
switch( dcr_ct ) {
case SPR_DCR_CT_IFEA:
match_so_far = (DebugInstructionFetch == action);
break;
case 8:
chain1 = (cpu_state.sprs[SPR_DWCR0] & SPR_DWCR_COUNT) ==
(cpu_state.sprs[SPR_DWCR0] & SPR_DWCR_MATCH);
chain2 = watchpoints & (1 << 7);
case SPR_DCR_CT_LEA:
match_so_far = (DebugLoadAddress == action);
break;
case 9:
chain1 = (cpu_state.sprs[SPR_DWCR1] & SPR_DWCR_COUNT) ==
(cpu_state.sprs[SPR_DWCR1] & SPR_DWCR_MATCH);
chain2 = watchpoints & (1 << 8);
case SPR_DCR_CT_SEA:
match_so_far = (DebugStoreAddress == action);
break;
case 10:
/* TODO: External watchpoint - not yet handled! */
#if 0
chain1 = external_watchpoint;
chain2 = watchpoints & (1 << 9);
#else
chain1 = chain2 = 0;
#endif
case SPR_DCR_CT_LD:
match_so_far = (DebugLoadData == action);
break;
case SPR_DCR_CT_SD:
match_so_far = (DebugStoreData == action);
break;
case SPR_DCR_CT_LSEA:
match_so_far = (DebugLoadAddress == action) ||
(DebugStoreAddress == action);
break;
case SPR_DCR_CT_LSD:
match_so_far = (DebugLoadData == action) ||
(DebugStoreData == action);
break;
default:
chain1 = DCR_hit;
chain2 = watchpoints & (bit >> 1);
break;
}
 
switch((cpu_state.sprs[SPR_DMR1] >> i) & SPR_DMR1_CW0) {
case 0: match = chain1; break;
case 1: match = chain1 && chain2; break;
case 2: match = chain1 || chain2; break;
if( !match_so_far ) {
continue;
}
 
/* Increment counters & generate counter break */
if(match) {
/* watchpoint did not appear before in this clock cycle */
if(!(watchpoints & bit)) {
int counter = (((cpu_state.sprs[SPR_DMR2] & SPR_DMR2_AWTC) >> 2) & bit) ? 1 : 0;
int enabled = cpu_state.sprs[SPR_DMR2] & (counter ? SPR_DMR2_WCE1 : SPR_DMR2_WCE0);
if(enabled) {
uorreg_t count = cpu_state.sprs[SPR_DWCR0 + counter];
count = (count & ~SPR_DWCR_COUNT) | ((count & SPR_DWCR_COUNT) + 1);
cpu_state.sprs[SPR_DWCR0 + counter] = count;
}
watchpoints |= bit;
dcr_sc = dcr & SPR_DCR_SC;
dcr_cc = dcr & SPR_DCR_CC;
 
/* Perform signed comparison? */
if( SPR_DCR_SC == dcr_sc ) {
long int sop1 = udata;
long int sop2 = cpu_state.sprs[SPR_DVR(i)];
 
switch(dcr & SPR_DCR_CC) {
case SPR_DCR_CC_MASKED: mp[i] = sop1 & sop2; break;
case SPR_DCR_CC_EQUAL: mp[i] = sop1 == sop2; break;
case SPR_DCR_CC_NEQUAL: mp[i] = sop1 != sop2; break;
case SPR_DCR_CC_LESS: mp[i] = sop1 < sop2; break;
case SPR_DCR_CC_LESSE: mp[i] = sop1 <= sop2; break;
case SPR_DCR_CC_GREAT: mp[i] = sop1 > sop2; break;
case SPR_DCR_CC_GREATE: mp[i] = sop1 >= sop2; break;
default: break;
}
} else {
unsigned long int op1 = udata;
unsigned long int op2 = cpu_state.sprs[SPR_DVR(i)];
 
/* should this watchpoint generate a breakpoint? */
if(((cpu_state.sprs[SPR_DMR2] & SPR_DMR2_WGB) >> 13) & bit)
breakpoint = 1;
switch(dcr & SPR_DCR_CC) {
case SPR_DCR_CC_MASKED: mp[i] = op1 & op2; break;
case SPR_DCR_CC_EQUAL: mp[i] = op1 == op2; break;
case SPR_DCR_CC_NEQUAL: mp[i] = op1 != op2; break;
case SPR_DCR_CC_LESS: mp[i] = op1 < op2; break;
case SPR_DCR_CC_LESSE: mp[i] = op1 <= op2; break;
case SPR_DCR_CC_GREAT: mp[i] = op1 > op2; break;
case SPR_DCR_CC_GREATE: mp[i] = op1 >= op2; break;
default: break;
}
}
 
if( mp[i] ) {
match_found = 1; /* A match was found */
}
}
 
return breakpoint;
/* If no match was found, give up here, since none of the watchpoints will
change. */
 
if( !match_found ) {
return 0;
}
 
/* Compute the non-counting watchpoints. Done by slog, since each one is
different. The counting watchpoints will be done AFTER the counts have
been incremented. Done in order, so the chaining works correctly. This
code expects the number of matchpoints to be 8. As a precaution, that is
asserted here.
 
IMPORTANT.....
 
The architecture manual appears to be wrong, in suggesting that
watchpoint 4 chains with external watchpoint in the same way as
watchpoint 0. The Verilog source code suggests it chains with watchpoint
3. */
 
assert( MAX_MATCHPOINTS == 8 );
 
dmr1 = cpu_state.sprs[SPR_DMR1];
 
switch( dmr1 & SPR_DMR1_CW0 ) {
case 0: wp[0] = mp[0]; break;
case SPR_DMR1_CW0_AND: printf( "External watchpoint not supported\n"); break;
case SPR_DMR1_CW0_OR: printf( "External watchpoint not supported\n"); break;
case SPR_DMR1_CW0: printf( "SPR DMR1_CW0=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW1 ) {
case 0: wp[1] = mp[1]; break;
case SPR_DMR1_CW1_AND: wp[1] = mp[1] && wp[0]; break;
case SPR_DMR1_CW1_OR: wp[1] = mp[1] || wp[0]; break;
case SPR_DMR1_CW1: printf( "SPR DMR1_CW1=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW2 ) {
case 0: wp[2] = mp[2]; break;
case SPR_DMR1_CW2_AND: wp[2] = mp[2] && wp[1]; break;
case SPR_DMR1_CW2_OR: wp[2] = mp[2] || wp[1]; break;
case SPR_DMR1_CW2: printf( "SPR DMR1_CW2=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW3 ) {
case 0: wp[3] = mp[3]; break;
case SPR_DMR1_CW3_AND: wp[3] = mp[3] && wp[2]; break;
case SPR_DMR1_CW3_OR: wp[3] = mp[3] || wp[2]; break;
case SPR_DMR1_CW3: printf( "SPR DMR1_CW3=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW4 ) {
case 0: wp[4] = mp[4]; break;
case SPR_DMR1_CW4_AND: wp[4] = mp[4] && wp[3]; break;
case SPR_DMR1_CW4_OR: wp[4] = mp[4] || wp[3]; break;
case SPR_DMR1_CW4: printf( "SPR DMR1_CW4=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW5 ) {
case 0: wp[5] = mp[5]; break;
case SPR_DMR1_CW5_AND: wp[5] = mp[5] && wp[4]; break;
case SPR_DMR1_CW5_OR: wp[5] = mp[5] || wp[4]; break;
case SPR_DMR1_CW5: printf( "SPR DMR1_CW5=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW6 ) {
case 0: wp[6] = mp[6]; break;
case SPR_DMR1_CW6_AND: wp[6] = mp[6] && wp[5]; break;
case SPR_DMR1_CW6_OR: wp[6] = mp[6] || wp[5]; break;
case SPR_DMR1_CW6: printf( "SPR DMR1_CW6=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW7 ) {
case 0: wp[7] = mp[7]; break;
case SPR_DMR1_CW7_AND: wp[7] = mp[7] && wp[6]; break;
case SPR_DMR1_CW7_OR: wp[7] = mp[7] || wp[6]; break;
case SPR_DMR1_CW7: printf( "SPR DMR1_CW7=11 reserved\n" ); break;
}
 
/* Increment counters. Note the potential ambiguity, if the last two
watchpoints, which depend on the counters, also increment the
counters. Since they cannot yet be set, they are not tested here. */
 
dmr2 = cpu_state.sprs[SPR_DMR2];
 
counter0_enabled = SPR_DMR2_WCE0 == (dmr2 & SPR_DMR2_WCE0);
counter1_enabled = SPR_DMR2_WCE1 == (dmr2 & SPR_DMR2_WCE1);
 
if( counter0_enabled || counter1_enabled ) {
short int counter0 = cpu_state.sprs[SPR_DWCR0] & SPR_DWCR_COUNT;
short int counter1 = cpu_state.sprs[SPR_DWCR1] & SPR_DWCR_COUNT;
 
for( i = 0 ; i < MAX_WATCHPOINTS - 2 ; i++ ) {
int use_counter_0 = (dmr2 >> (SPR_DMR2_AWTC_OFF + i) & 1) != 1;
 
if( use_counter_0 ) {
if( counter0_enabled && wp[i] ) {
counter0++;
}
}
else {
if( counter1_enabled && wp[i] ) {
counter1++;
}
}
}
 
cpu_state.sprs[SPR_DWCR0] &= ~SPR_DWCR_COUNT;
cpu_state.sprs[SPR_DWCR0] |= counter0;
cpu_state.sprs[SPR_DWCR1] &= ~SPR_DWCR_COUNT;
cpu_state.sprs[SPR_DWCR1] |= counter1;
}
 
/* Sort out the last two matchpoints, which depend on counters
 
IMPORTANT.....
 
The architecture manual appears to be wrong, in suggesting that
watchpoint 8 chains with watchpoint 3 and watchpoint 9 chains with
watchpoint 7. The Verilog source code suggests watchpoint 8 chains with
watchpoint 7 and watchpoint 9 chains with watchpoint 8. */
 
counter0_matched =
((cpu_state.sprs[SPR_DWCR0] & SPR_DWCR_COUNT) ==
((cpu_state.sprs[SPR_DWCR0] & SPR_DWCR_MATCH) >> SPR_DWCR_MATCH_OFF));
counter1_matched =
((cpu_state.sprs[SPR_DWCR1] & SPR_DWCR_COUNT) ==
((cpu_state.sprs[SPR_DWCR1] & SPR_DWCR_MATCH) >> SPR_DWCR_MATCH_OFF));
 
switch( dmr1 & SPR_DMR1_CW8 ) {
case 0: wp[8] = counter0_matched; break;
case SPR_DMR1_CW8_AND: wp[8] = counter0_matched && wp[7]; break;
case SPR_DMR1_CW8_OR: wp[8] = counter0_matched || wp[7]; break;
case SPR_DMR1_CW8: printf( "SPR DMR1_CW8=11 reserved\n" ); break;
}
 
switch( dmr1 & SPR_DMR1_CW9 ) {
case 0: wp[9] = counter1_matched; break;
case SPR_DMR1_CW9_AND: wp[9] = counter1_matched && wp[8]; break;
case SPR_DMR1_CW9_OR: wp[9] = counter1_matched || wp[8]; break;
case SPR_DMR1_CW9: printf( "SPR DMR1_CW9=11 reserved\n" ); break;
}
 
/* Now work out which watchpoints (if any) have caused a breakpoint and
update the breakpoint status bits */
 
breakpoint_found = 0;
 
for( i = 0 ; i < MAX_WATCHPOINTS ; i++ ) {
if( 1 == (dmr2 >> (SPR_DMR2_WGB_OFF + i) & 1)) {
if( wp[i] ) {
dmr2 |= 1 << (SPR_DMR2_WBS_OFF + i);
breakpoint_found = 1;
}
}
}
 
cpu_state.sprs[SPR_DMR2] = dmr2;
 
return breakpoint_found;
 
}
 
static DebugScanChainIDs current_scan_chain = JTAG_CHAIN_GLOBAL;
/trunk/or1ksim/debug/gdbcomm.c
1,24 → 1,28
/* gdbcomm.c -- Communication routines for gdb
Copyright (C) 2001 by Marko Mlinar, markom@opencores.org
Code copied from toplevel.c
 
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
Copyright (C) 2001 by Marko Mlinar, markom@opencores.org
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
 
/* Code copied from toplevel.c */
 
#include <stdlib.h>
#include <stdio.h>
#include <sys/stat.h>
293,7 → 297,7
return;
}
 
if(fcntl(fd,F_GETFL,&flags) < 0)
if((flags = fcntl(fd,F_GETFL)) < 0) /* JPB */
{
sprintf(sTemp,"Unable to get flags for gdb socket %d",fd);
perror(sTemp);
/trunk/or1ksim/cpu/or32/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,37 → 15,33
@SET_MAKE@
 
# Makefile -- Makefile for OR32 dependent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
SOURCES = $(libarch_a_SOURCES) $(dyngen_SOURCES) $(generate_SOURCES) $(test_dyn_rec_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
61,8 → 57,7
host_triplet = @host@
target_triplet = @target@
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@noinst_PROGRAMS = generate$(EXEEXT)
@DYNAMIC_EXECUTION_TRUE@noinst_PROGRAMS = dyngen$(EXEEXT) \
@DYNAMIC_EXECUTION_TRUE@ test_dyn_rec$(EXEEXT)
@DYNAMIC_EXECUTION_TRUE@noinst_PROGRAMS = dyngen$(EXEEXT)
subdir = cpu/or32
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
75,8 → 70,12
LIBRARIES = $(noinst_LIBRARIES)
libarch_a_AR = $(AR) $(ARFLAGS)
libarch_a_LIBADD =
am__libarch_a_SOURCES_DIST = execute.c or32.c op.c dyn_rec.c \
op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c
am__libarch_a_SOURCES_DIST = execute.c or32.c common_i386.h \
dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h op_arith_op.h \
op_comp_op.h op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h op.c \
dyn_rec.c op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c
@DYNAMIC_EXECUTION_FALSE@am_libarch_a_OBJECTS = execute.$(OBJEXT) \
@DYNAMIC_EXECUTION_FALSE@ or32.$(OBJEXT)
@DYNAMIC_EXECUTION_TRUE@am_libarch_a_OBJECTS = execute.$(OBJEXT) \
87,29 → 86,28
@DYNAMIC_EXECUTION_TRUE@ gen_ops_rel.$(OBJEXT)
libarch_a_OBJECTS = $(am_libarch_a_OBJECTS)
PROGRAMS = $(noinst_PROGRAMS)
am__dyngen_SOURCES_DIST = dyngen.c dyngen_i386.c dyngen_elf.c
am__dyngen_SOURCES_DIST = dyngen.c dyngen_i386.c dyngen_elf.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h \
op_arith_op.h op_comp_op.h op_extend_op.h op_ff1_op.h \
op_i386.h op_lwhb_op.h op_mac_op.h op_mftspr_op.h op_support.h \
op_swhb_op.h op_t_reg_mov_op.h rec_i386.h sched_i386.h \
simpl32_defs.h
@DYNAMIC_EXECUTION_TRUE@am_dyngen_OBJECTS = dyngen.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ dyngen_i386.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ dyngen_elf.$(OBJEXT)
dyngen_OBJECTS = $(am_dyngen_OBJECTS)
dyngen_LDADD = $(LDADD)
am__generate_SOURCES_DIST = or32.c generate.c
am__generate_SOURCES_DIST = or32.c generate.c common_i386.h \
dyn32_defs.h dyngen.h dyn_rec.h i386_regs.h op_arith_op.h \
op_comp_op.h op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@am_generate_OBJECTS = \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ or32.$(OBJEXT) \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ generate.$(OBJEXT)
generate_OBJECTS = $(am_generate_OBJECTS)
generate_LDADD = $(LDADD)
am__test_dyn_rec_SOURCES_DIST = op.c dyn_rec.c op_support.c gen_ops.c \
gen_ops_gen.c gen_ops_rel.c dyn_rec_stubs.c or32.c
@DYNAMIC_EXECUTION_TRUE@am_test_dyn_rec_OBJECTS = op.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ dyn_rec.$(OBJEXT) op_support.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ gen_ops.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ gen_ops_gen.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ gen_ops_rel.$(OBJEXT) \
@DYNAMIC_EXECUTION_TRUE@ dyn_rec_stubs.$(OBJEXT) or32.$(OBJEXT)
test_dyn_rec_OBJECTS = $(am_test_dyn_rec_OBJECTS)
test_dyn_rec_LDADD = $(LDADD)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
116,17 → 114,13
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libarch_a_SOURCES) $(dyngen_SOURCES) $(generate_SOURCES) \
$(test_dyn_rec_SOURCES)
SOURCES = $(libarch_a_SOURCES) $(dyngen_SOURCES) $(generate_SOURCES)
DIST_SOURCES = $(am__libarch_a_SOURCES_DIST) \
$(am__dyngen_SOURCES_DIST) $(am__generate_SOURCES_DIST) \
$(am__test_dyn_rec_SOURCES_DIST)
$(am__dyngen_SOURCES_DIST) $(am__generate_SOURCES_DIST)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
144,16 → 138,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
167,6 → 159,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
182,11 → 175,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
198,7 → 191,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
205,19 → 202,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
224,15 → 226,47
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libarch.a
@DYNAMIC_EXECUTION_TRUE@test_dyn_rec_SOURCES = op.c dyn_rec.c op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c dyn_rec_stubs.c or32.c
@DYNAMIC_EXECUTION_TRUE@dyngen_SOURCES = dyngen.c dyngen_i386.c dyngen_elf.c
@DYNAMIC_EXECUTION_FALSE@libarch_a_SOURCES = execute.c or32.c
@DYNAMIC_EXECUTION_TRUE@libarch_a_SOURCES = execute.c or32.c op.c dyn_rec.c op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c
@DYNAMIC_EXECUTION_TRUE@dyngen_SOURCES = dyngen.c dyngen_i386.c dyngen_elf.c \
@DYNAMIC_EXECUTION_TRUE@ common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
@DYNAMIC_EXECUTION_TRUE@ i386_regs.h op_arith_op.h op_comp_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
@DYNAMIC_EXECUTION_FALSE@libarch_a_SOURCES = execute.c or32.c \
@DYNAMIC_EXECUTION_FALSE@ common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
@DYNAMIC_EXECUTION_FALSE@ i386_regs.h op_arith_op.h op_comp_op.h \
@DYNAMIC_EXECUTION_FALSE@ op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
@DYNAMIC_EXECUTION_FALSE@ op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
@DYNAMIC_EXECUTION_FALSE@ op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
@DYNAMIC_EXECUTION_TRUE@libarch_a_SOURCES = execute.c or32.c op.c dyn_rec.c op_support.c gen_ops.c \
@DYNAMIC_EXECUTION_TRUE@ gen_ops_gen.c gen_ops_rel.c \
@DYNAMIC_EXECUTION_TRUE@ common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
@DYNAMIC_EXECUTION_TRUE@ i386_regs.h op_arith_op.h op_comp_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
@DYNAMIC_EXECUTION_TRUE@ op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
@DYNAMIC_EXECUTION_TRUE@OP_CFLAGS = -Wall -fomit-frame-pointer -fno-reorder-blocks -O2
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@generate_SOURCES = or32.c generate.c
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@BUILT_SOURCES = execgen.c
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@generate_SOURCES = or32.c generate.c \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ i386_regs.h op_arith_op.h op_comp_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@BUILT_SOURCES = execgen.c \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ i386_regs.h op_arith_op.h op_comp_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
@DYNAMIC_EXECUTION_FALSE@@GENERATE_NEEDED_TRUE@ op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
 
# If the simulator was first built without --enable-simple and then with it,
# then also remove these two files
CLEANFILES = execgen.c generate gen_ops.c gen_ops.h gen_ops_rel.c gen_ops_gen.c
282,13 → 316,10
-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
dyngen$(EXEEXT): $(dyngen_OBJECTS) $(dyngen_DEPENDENCIES)
@rm -f dyngen$(EXEEXT)
$(LINK) $(dyngen_LDFLAGS) $(dyngen_OBJECTS) $(dyngen_LDADD) $(LIBS)
$(LINK) $(dyngen_OBJECTS) $(dyngen_LDADD) $(LIBS)
generate$(EXEEXT): $(generate_OBJECTS) $(generate_DEPENDENCIES)
@rm -f generate$(EXEEXT)
$(LINK) $(generate_LDFLAGS) $(generate_OBJECTS) $(generate_LDADD) $(LIBS)
test_dyn_rec$(EXEEXT): $(test_dyn_rec_OBJECTS) $(test_dyn_rec_DEPENDENCIES)
@rm -f test_dyn_rec$(EXEEXT)
$(LINK) $(test_dyn_rec_LDFLAGS) $(test_dyn_rec_OBJECTS) $(test_dyn_rec_LDADD) $(LIBS)
$(LINK) $(generate_OBJECTS) $(generate_LDADD) $(LIBS)
 
mostlyclean-compile:
-rm -f *.$(OBJEXT)
297,7 → 328,6
-rm -f *.tab.c
 
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_rec.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_rec_stubs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen_elf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyngen_i386.Po@am__quote@
311,19 → 341,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/or32.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
330,8 → 359,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
343,8 → 372,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
354,13 → 383,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
374,22 → 402,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
455,12 → 482,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
480,28 → 515,32
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES clean-noinstPROGRAMS ctags distclean \
distclean-compile distclean-generic distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
 
@DYNAMIC_EXECUTION_TRUE@dyn_rec.o: gen_ops.h
 
@DYNAMIC_EXECUTION_TRUE@op.S: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_ff1_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h
@DYNAMIC_EXECUTION_TRUE@op.S: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h
@DYNAMIC_EXECUTION_TRUE@ $(CC) $(INCLUDES) $(OP_CFLAGS) -o $@ -S $<
 
@DYNAMIC_EXECUTION_TRUE@gen_ops.h gen_ops.c gen_ops_gen.c gen_ops_rel.c: dyngen op.o
 
@DYNAMIC_EXECUTION_TRUE@op.o: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_ff1_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h
@DYNAMIC_EXECUTION_TRUE@op.o: op.c op_t_reg_mov_op.h op_i386.h op_arith_op.h op_comp_op.h op_extend_op.h op_mac_op.h op_mftspr_op.h op_lwhb_op.h op_swhb_op.h
@DYNAMIC_EXECUTION_TRUE@ $(CC) $(INCLUDES) $(OP_CFLAGS) -o $@ -c $<
 
@DYNAMIC_EXECUTION_TRUE@gen_ops.h gen_ops.c gen_ops_gen.c gen_ops_rel.c: dyngen$(EXEEXT) op.o
/trunk/or1ksim/cpu/or32/execute.c
1,23 → 1,27
/* execute.c -- OR1K architecture dependent simulation
 
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
 
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/* Most of the OR1K simulation is done in here.
 
When SIMPLE_EXECUTION is defined below a file insnset.c is included!
648,10 → 652,12
hist_exec_head->prev = hist_exec_tail;
 
/* Cpu configuration */
cpu_state.sprs[SPR_UPR] = config.cpu.upr;
cpu_state.sprs[SPR_VR] = config.cpu.rev & SPR_VR_REV;
cpu_state.sprs[SPR_VR] |= config.cpu.ver << 16;
cpu_state.sprs[SPR_SR] = config.cpu.sr;
cpu_state.sprs[SPR_UPR] = config.cpu.upr;
cpu_state.sprs[SPR_CPUCFGR] = config.cpu.cfgr; /* JPB */
cpu_state.sprs[SPR_DCFGR] = config.debug.cfgr; /* JPB */
cpu_state.sprs[SPR_VR] = config.cpu.rev & SPR_VR_REV;
cpu_state.sprs[SPR_VR] |= config.cpu.ver << 16;
cpu_state.sprs[SPR_SR] = config.cpu.sr;
 
pcnext = 0x0; /* MM1409: All programs should start at reset vector entry! */
if (config.sim.verbose) PRINTF ("Starting at 0x%"PRIxADDR"\n", pcnext);
/trunk/or1ksim/cpu/or32/insnset.c
1,23 → 1,27
/* execute.c -- Instruction specific functions.
 
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
2000-2002 Marko Mlinar, markom@opencores.org
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
INSTRUCTION (l_add) {
orreg_t temp1, temp2, temp3;
int8_t temp4;
102,8 → 106,9
uint32_t val;
if (config.cpu.sbuf_len) sbuf_load ();
val = eval_mem32(PARAM1, &breakpoint);
/* If eval operand produced exception don't set anything */
if (!except_pending)
/* If eval operand produced exception don't set anything. JPB changed to
trigger on breakpoint, as well as except_pending (seemed to be a bug). */
if (!(except_pending || breakpoint))
SET_PARAM0(val);
}
INSTRUCTION (l_lbs) {
110,8 → 115,9
int8_t val;
if (config.cpu.sbuf_len) sbuf_load ();
val = eval_mem8(PARAM1, &breakpoint);
/* If eval opreand produced exception don't set anything */
if (!except_pending)
/* If eval operand produced exception don't set anything. JPB changed to
trigger on breakpoint, as well as except_pending (seemed to be a bug). */
if (!(except_pending || breakpoint))
SET_PARAM0(val);
}
INSTRUCTION (l_lbz) {
118,8 → 124,9
uint8_t val;
if (config.cpu.sbuf_len) sbuf_load ();
val = eval_mem8(PARAM1, &breakpoint);
/* If eval opreand produced exception don't set anything */
if (!except_pending)
/* If eval operand produced exception don't set anything. JPB changed to
trigger on breakpoint, as well as except_pending (seemed to be a bug). */
if (!(except_pending || breakpoint))
SET_PARAM0(val);
}
INSTRUCTION (l_lhs) {
126,8 → 133,9
int16_t val;
if (config.cpu.sbuf_len) sbuf_load ();
val = eval_mem16(PARAM1, &breakpoint);
/* If eval opreand produced exception don't set anything */
if (!except_pending)
/* If eval operand produced exception don't set anything. JPB changed to
trigger on breakpoint, as well as except_pending (seemed to be a bug). */
if (!(except_pending || breakpoint))
SET_PARAM0(val);
}
INSTRUCTION (l_lhz) {
134,8 → 142,9
uint16_t val;
if (config.cpu.sbuf_len) sbuf_load ();
val = eval_mem16(PARAM1, &breakpoint);
/* If eval opreand produced exception don't set anything */
if (!except_pending)
/* If eval operand produced exception don't set anything. JPB changed to
trigger on breakpoint, as well as except_pending (seemed to be a bug). */
if (!(except_pending || breakpoint))
SET_PARAM0(val);
}
INSTRUCTION (l_movhi) {
330,6 → 339,10
stackaddr = evalsim_reg(4);
simprintf(stackaddr, evalsim_reg(3));
break;
case NOP_PUTC: /*JPB */
printf( "%c", evalsim_reg( 3 ));
fflush( stdout );
break;
case NOP_REPORT:
PRINTF("report(0x%"PRIxREG");\n", evalsim_reg(3));
default:
/trunk/or1ksim/cpu/or32/Makefile.am
1,23 → 1,26
# Makefile -- Makefile for OR32 dependent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libarch.a
 
if DYNAMIC_EXECUTION
24,9 → 27,20
 
noinst_PROGRAMS = dyngen
 
dyngen_SOURCES = dyngen.c dyngen_i386.c dyngen_elf.c
dyngen_SOURCES = dyngen.c dyngen_i386.c dyngen_elf.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
i386_regs.h op_arith_op.h op_comp_op.h \
op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
libarch_a_SOURCES = execute.c or32.c op.c dyn_rec.c op_support.c gen_ops.c gen_ops_gen.c gen_ops_rel.c
libarch_a_SOURCES = execute.c or32.c op.c dyn_rec.c op_support.c gen_ops.c \
gen_ops_gen.c gen_ops_rel.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
i386_regs.h op_arith_op.h op_comp_op.h \
op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
dyn_rec.o: gen_ops.h
 
45,13 → 59,28
 
else
 
libarch_a_SOURCES = execute.c or32.c
libarch_a_SOURCES = execute.c or32.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
i386_regs.h op_arith_op.h op_comp_op.h \
op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
if GENERATE_NEEDED
noinst_PROGRAMS = generate
generate_SOURCES = or32.c generate.c
generate_SOURCES = or32.c generate.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
i386_regs.h op_arith_op.h op_comp_op.h \
op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
BUILT_SOURCES = execgen.c
BUILT_SOURCES = execgen.c \
common_i386.h dyn32_defs.h dyngen.h dyn_rec.h \
i386_regs.h op_arith_op.h op_comp_op.h \
op_extend_op.h op_ff1_op.h op_i386.h op_lwhb_op.h \
op_mac_op.h op_mftspr_op.h op_support.h op_swhb_op.h \
op_t_reg_mov_op.h rec_i386.h sched_i386.h simpl32_defs.h
 
execgen.c: generate$(EXEEXT) $(srcdir)/insnset.c
./generate$(EXEEXT) $(srcdir)/insnset.c execgen.c
/trunk/or1ksim/cpu/or1k/spr_dump.c
1,22 → 1,26
/* spr_dump.c -- Dump given spr in human readable form
 
 
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
#include <string.h>
 
#include "config.h"
56,54 → 60,59
/*---------------------------------------------------------[ System group ]---*/
/* Supervisor register */
static const struct spr_bit_def spr_sr[] = {
{ "SR_CID", SPR_SR_CID },
{ "SR_SM", SPR_SR_SM },
{ "SR_TEE", SPR_SR_TEE },
{ "SR_IEE", SPR_SR_IEE },
{ "SR_DCE", SPR_SR_DCE },
{ "SR_ICE", SPR_SR_ICE },
{ "SR_DME", SPR_SR_DME },
{ "SR_IME", SPR_SR_IME },
{ "SR_LEE", SPR_SR_IME },
{ "SR_CE", SPR_SR_CE },
{ "SR_F", SPR_SR_F },
{ "SR_CY", SPR_SR_CY },
{ "SR_OV", SPR_SR_OV },
{ "SR_OVE", SPR_SR_OVE },
{ "SR_DSX", SPR_SR_DSX },
{ "SR_EPH", SPR_SR_EPH },
{ "SR_FO", SPR_SR_FO },
{ "SR_SUMRA", SPR_SR_SUMRA },
{ "SR_FO", SPR_SR_FO },
{ "SR_EPH", SPR_SR_EPH },
{ "SR_DSX", SPR_SR_DSX },
{ "SR_OVE", SPR_SR_OVE },
{ "SR_OV", SPR_SR_OV },
{ "SR_CY", SPR_SR_CY },
{ "SR_F", SPR_SR_F },
{ "SR_CE", SPR_SR_CE },
{ "SR_IME", SPR_SR_IME },
{ "SR_DME", SPR_SR_DME },
{ "SR_ICE", SPR_SR_ICE },
{ "SR_DCE", SPR_SR_DCE },
{ "SR_IEE", SPR_SR_IEE },
{ "SR_TEE", SPR_SR_TEE },
{ "SR_SM", SPR_SR_SM },
{ NULL, 0 } };
{ "SR_RES", SPR_SR_RES },
{ "SR_CID", SPR_SR_CID },
{ NULL, 0 } };
 
/* Version register */
static const struct spr_bit_def spr_vr[] = {
{ "VR_VER", SPR_VR_VER },
{ "VR_REV", SPR_VR_REV },
{ NULL, 0 } };
{ NULL, 0 } };
 
/* upr register */
static const struct spr_bit_def spr_upr[] = {
{ "UPR_UP", SPR_UPR_UP },
{ "UPR_DCP", SPR_UPR_DCP },
{ "UPR_ICP", SPR_UPR_ICP },
{ "UPR_DMP", SPR_UPR_DMP },
{ "UPR_IMP", SPR_UPR_IMP },
{ "UPR_OB32P", SPR_UPR_OB32P },
{ "UPR_OB64P", SPR_UPR_OB64P },
{ "UPR_OF32P", SPR_UPR_OF32P },
{ "UPR_OF64P", SPR_UPR_OF64P },
{ "UPR_OV32P", SPR_UPR_OV32P },
{ "UPR_OV64P", SPR_UPR_OV64P },
{ "UPR_DUP", SPR_UPR_DUP },
{ "UPR_UP", SPR_UPR_UP },
{ "UPR_DCP", SPR_UPR_DCP },
{ "UPR_ICP", SPR_UPR_ICP },
{ "UPR_DMP", SPR_UPR_DMP },
{ "UPR_IMP", SPR_UPR_IMP },
{ "UPR_MP", SPR_UPR_MP },
{ "UPR_DUP", SPR_UPR_DUP },
{ "UPR_PCUP", SPR_UPR_PCUP },
{ "UPR_PMP", SPR_UPR_PMP },
{ "UPR_PMP", SPR_UPR_PMP },
{ "UPR_PICP", SPR_UPR_PICP },
{ "UPR_TTP", SPR_UPR_TTP },
{ "UPR_SRP", SPR_UPR_SRP },
{ "UPR_RES", SPR_UPR_RES },
{ "UPR_CUST", SPR_UPR_CUST },
{ NULL, 0 } };
{ "UPR_TTP", SPR_UPR_TTP },
{ "UPR_RES", SPR_UPR_RES },
{ "UPR_CUP", SPR_UPR_CUP },
{ NULL, 0 } };
 
/* CPUCFGR register */
static const struct spr_bit_def spr_cpucfgr[] = {
{ "CPUCFGR_OB32S", SPR_CPUCFGR_OB32S },
{ "CPUCFGR_OB64S", SPR_CPUCFGR_OB64S },
{ "CPUCFGR_OF32S", SPR_CPUCFGR_OF32S },
{ "CPUCFGR_OF64S", SPR_CPUCFGR_OF64S },
{ "CPUCFGR_OV64S", SPR_CPUCFGR_OV64S },
{ NULL, 0 } };
 
/* dmmucfgr register */
static const struct spr_bit_def spr_dmmucfgr[] = {
{ "DMMUCFGR_NTW", SPR_DMMUCFGR_NTW },
151,22 → 160,30
{ "ICCFGR_CBLRI", SPR_ICCFGR_CBLRI },
{ NULL, 0 } };
 
/* DCFGR register */
static const struct spr_bit_def spr_dcfgr[] = {
{ "DCFGR_NDP", SPR_DCFGR_NDP },
{ "DCFGR_WPCI", SPR_DCFGR_WPCI },
{ NULL, 0 } };
 
/* System group */
static const struct spr_def spr_sys_group[] = {
/* 000-000 */ { 0x000, 0x000, "SPR_VR", spr_vr },
/* 001-001 */ { 0x001, 0x001, "SPR_UPR", spr_upr },
/* 000-000 */ { 0x000, 0x000, "SPR_VR", spr_vr },
/* 001-001 */ { 0x001, 0x001, "SPR_UPR", spr_upr },
/* 002-002 */ { 0x002, 0x002, "SPR_CPUCFGR", spr_cpucfgr }, /* JPB */
/* 003-003 */ { 0x003, 0x003, "SPR_DMMUCFGR", spr_dmmucfgr },
/* 004-004 */ { 0x004, 0x004, "SPR_IMMUCFGR", spr_immucfgr },
/* 005-005 */ { 0x005, 0x005, "SPR_DCCFGR", spr_dccfgr },
/* 006-006 */ { 0x006, 0x006, "SPR_ICCFGR", spr_iccfgr },
/* 010-010 */ { 0x010, 0x010, "SPR_NPC", spr_one_val },
/* 011-011 */ { 0x011, 0x011, "SPR_SR", spr_sr },
/* 012-012 */ { 0x012, 0x012, "SPR_PPC", spr_one_val },
/* 020-02f */ { 0x020, 0x02f, "SPR_EPCR(%i)", spr_one_val },
/* 030-03f */ { 0x030, 0x03f, "SPR_EEAR(%i)", spr_one_val },
/* 040-04f */ { 0x040, 0x04f, "SPR_ESR(%i)", spr_sr },
/* 400-41f */ { 0x400, 0x41f, "GPR(%i)", spr_one_val },
/* ----- */ { -1, -1, NULL, NULL } };
/* 005-005 */ { 0x005, 0x005, "SPR_DCCFGR", spr_dccfgr },
/* 006-006 */ { 0x006, 0x006, "SPR_ICCFGR", spr_iccfgr },
/* 007-007 */ { 0x007, 0x007, "SPR_DCFGR", spr_dcfgr }, /* JPB */
/* 010-010 */ { 0x010, 0x010, "SPR_NPC", spr_one_val },
/* 011-011 */ { 0x011, 0x011, "SPR_SR", spr_sr },
/* 012-012 */ { 0x012, 0x012, "SPR_PPC", spr_one_val },
/* 020-02f */ { 0x020, 0x02f, "SPR_EPCR(%i)", spr_one_val },
/* 030-03f */ { 0x030, 0x03f, "SPR_EEAR(%i)", spr_one_val },
/* 040-04f */ { 0x040, 0x04f, "SPR_ESR(%i)", spr_sr },
/* 400-41f */ { 0x400, 0x41f, "GPR(%i)", spr_one_val },
/* ------- */ { -1, -1, NULL, NULL } };
 
/*-----------------------------------------------------------[ DMMU group ]---*/
/* Data MMU conrtol reg */
301,21 → 318,21
/*----------------------------------------------------------[ Debug group ]---*/
/* dmr1 register */
static const struct spr_bit_def spr_dmr1[] = {
{ "DMR1_CW0", SPR_DMR1_CW0 },
{ "DMR1_CW1", SPR_DMR1_CW1 },
{ "DMR1_CW2", SPR_DMR1_CW2 },
{ "DMR1_CW3", SPR_DMR1_CW3 },
{ "DMR1_CW4", SPR_DMR1_CW4 },
{ "DMR1_CW5", SPR_DMR1_CW5 },
{ "DMR1_CW6", SPR_DMR1_CW6 },
{ "DMR1_CW7", SPR_DMR1_CW7 },
{ "DMR1_CW8", SPR_DMR1_CW8 },
{ "DMR1_CW9", SPR_DMR1_CW9 },
{ "DMR1_CW10", SPR_DMR1_CW10 },
{ "DMR1_ST", SPR_DMR1_ST },
{ "DMR1_BT", SPR_DMR1_BT },
{ "DMR1_DXFW", SPR_DMR1_DXFW },
{ NULL, 0 } };
{ "DMR1_CW0", SPR_DMR1_CW0 },
{ "DMR1_CW1", SPR_DMR1_CW1 },
{ "DMR1_CW2", SPR_DMR1_CW2 },
{ "DMR1_CW3", SPR_DMR1_CW3 },
{ "DMR1_CW4", SPR_DMR1_CW4 },
{ "DMR1_CW5", SPR_DMR1_CW5 },
{ "DMR1_CW6", SPR_DMR1_CW6 },
{ "DMR1_CW7", SPR_DMR1_CW7 },
{ "DMR1_CW8", SPR_DMR1_CW8 },
{ "DMR1_CW9", SPR_DMR1_CW9 },
{ "DMR1_RES1", SPR_DMR1_RES1 },
{ "DMR1_ST", SPR_DMR1_ST },
{ "DMR1_BT", SPR_DMR1_BT },
{ "DMR1_RES2", SPR_DMR1_RES2 },
{ NULL, 0 } };
 
/* dmr2 register */
static const struct spr_bit_def spr_dmr2[] = {
322,8 → 339,9
{ "DMR2_WCE0", SPR_DMR2_WCE0 },
{ "DMR2_WCE1", SPR_DMR2_WCE1 },
{ "DMR2_AWTC", SPR_DMR2_AWTC },
{ "DMR2_WGB", SPR_DMR2_WGB },
{ NULL, 0 } };
{ "DMR2_WGB", SPR_DMR2_WGB },
{ "DMR2_WBS", SPR_DMR2_WBS }, /* JPB */
{ NULL, 0 } };
 
/* dwcr register */
static const struct spr_bit_def spr_dwcr[] = {
/trunk/or1ksim/cpu/or1k/spr_defs.h
1,29 → 1,25
/* spr_defs.h -- Defines OR1K architecture specific special-purpose registers
 
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
/* This file is also used by microkernel test bench. Among others it is also
used in assembly file(s). */
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/* This file is also used by microkernel test bench. Among
others it is also used in assembly file(s). */
 
/* Definition of special-purpose registers (SPRs) */
 
#define MAX_GRPS (32)
137,90 → 133,55
* Bit definitions for the Unit Present Register
*
*/
#define SPR_UPR_UP 0x00000001 /* UPR present */
#define SPR_UPR_DCP 0x00000002 /* Data cache present */
#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */
#define SPR_UPR_DMP 0x00000008 /* Data MMU present */
#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
#define SPR_UPR_MP 0x00000020 /* MAC present */
#define SPR_UPR_DUP 0x00000040 /* Debug unit present */
#define SPR_UPR_PCUP 0x00000080 /* Performance counters unit present */
#define SPR_UPR_PMP 0x00000100 /* Power management present */
#define SPR_UPR_PICP 0x00000200 /* PIC present */
#define SPR_UPR_TTP 0x00000400 /* Tick timer present */
#define SPR_UPR_RES 0x00fe0000 /* Reserved */
#define SPR_UPR_CUP 0xff000000 /* Context units present */
#define SPR_UPR_UP 0x00000001 /* UPR present */
#define SPR_UPR_DCP 0x00000002 /* Data cache present */
#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */
#define SPR_UPR_DMP 0x00000008 /* Data MMU present */
#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
#define SPR_UPR_OB32P 0x00000020 /* ORBIS32 present */
#define SPR_UPR_OB64P 0x00000040 /* ORBIS64 present */
#define SPR_UPR_OF32P 0x00000080 /* ORFPX32 present */
#define SPR_UPR_OF64P 0x00000100 /* ORFPX64 present */
#define SPR_UPR_OV32P 0x00000200 /* ORVDX32 present */
#define SPR_UPR_OV64P 0x00000400 /* ORVDX64 present */
#define SPR_UPR_DUP 0x00000800 /* Debug unit present */
#define SPR_UPR_PCUP 0x00001000 /* Performance counters unit present */
#define SPR_UPR_PMP 0x00002000 /* Power management present */
#define SPR_UPR_PICP 0x00004000 /* PIC present */
#define SPR_UPR_TTP 0x00008000 /* Tick timer present */
#define SPR_UPR_SRP 0x00010000 /* Shadow registers present */
#define SPR_UPR_RES 0x00fe0000 /* ORVDX32 present */
#define SPR_UPR_CUST 0xff000000 /* Custom units */
 
/*
* JPB: Bit definitions for the CPU configuration register
*
*/
#define SPR_CPUCFGR_NSGF 0x0000000f /* Number of shadow GPR files */
#define SPR_CPUCFGR_CGF 0x00000010 /* Custom GPR file */
#define SPR_CPUCFGR_OB32S 0x00000020 /* ORBIS32 supported */
#define SPR_CPUCFGR_OB64S 0x00000040 /* ORBIS64 supported */
#define SPR_CPUCFGR_OF32S 0x00000080 /* ORFPX32 supported */
#define SPR_CPUCFGR_OF64S 0x00000100 /* ORFPX64 supported */
#define SPR_CPUCFGR_OV64S 0x00000200 /* ORVDX64 supported */
#define SPR_CPUCFGR_RES 0xfffffc00 /* Reserved */
 
/*
* JPB: Bit definitions for the Debug configuration register and other
* constants.
*
*/
 
#define SPR_DCFGR_NDP 0x00000007 /* Number of matchpoints mask */
#define SPR_DCFGR_NDP1 0x00000000 /* One matchpoint supported */
#define SPR_DCFGR_NDP2 0x00000001 /* Two matchpoints supported */
#define SPR_DCFGR_NDP3 0x00000002 /* Three matchpoints supported */
#define SPR_DCFGR_NDP4 0x00000003 /* Four matchpoints supported */
#define SPR_DCFGR_NDP5 0x00000004 /* Five matchpoints supported */
#define SPR_DCFGR_NDP6 0x00000005 /* Six matchpoints supported */
#define SPR_DCFGR_NDP7 0x00000006 /* Seven matchpoints supported */
#define SPR_DCFGR_NDP8 0x00000007 /* Eight matchpoints supported */
#define SPR_DCFGR_WPCI 0x00000080 /* Watchpoint counters implemented */
 
#define MATCHPOINTS_TO_NDP(n) (1 == n ? SPR_DCFGR_NDP1 : \
2 == n ? SPR_DCFGR_NDP2 : \
3 == n ? SPR_DCFGR_NDP3 : \
4 == n ? SPR_DCFGR_NDP4 : \
5 == n ? SPR_DCFGR_NDP5 : \
6 == n ? SPR_DCFGR_NDP6 : \
7 == n ? SPR_DCFGR_NDP7 : SPR_DCFGR_NDP8)
#define MAX_MATCHPOINTS 8
#define MAX_WATCHPOINTS (MAX_MATCHPOINTS + 2)
 
/*
* Bit definitions for the Supervision Register
*
*/
#define SPR_SR_SM 0x00000001 /* Supervisor Mode */
#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */
#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */
#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */
#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */
#define SPR_SR_DME 0x00000020 /* Data MMU Enable */
#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */
#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */
#define SPR_SR_CE 0x00000100 /* CID Enable */
#define SPR_SR_F 0x00000200 /* Condition Flag */
#define SPR_SR_CY 0x00000400 /* Carry flag */
#define SPR_SR_OV 0x00000800 /* Overflow flag */
#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */
#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */
#define SPR_SR_EPH 0x00004000 /* Exception Prefix High */
#define SPR_SR_FO 0x00008000 /* Fixed one */
#define SPR_SR_SUMRA 0x00010000 /* Supervisor SPR read access */
#define SPR_SR_RES 0x0ffe0000 /* Reserved */
#define SPR_SR_CID 0xf0000000 /* Context ID */
#define SPR_SR_CID 0xf0000000 /* Context ID */
#define SPR_SR_SUMRA 0x00010000 /* Supervisor SPR read access */
#define SPR_SR_FO 0x00008000 /* Fixed one */
#define SPR_SR_EPH 0x00004000 /* Exception Prefix High */
#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */
#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */
#define SPR_SR_OV 0x00000800 /* Overflow flag */
#define SPR_SR_CY 0x00000400 /* Carry flag */
#define SPR_SR_F 0x00000200 /* Condition Flag */
#define SPR_SR_CE 0x00000100 /* CID Enable */
#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */
#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */
#define SPR_SR_DME 0x00000020 /* Data MMU Enable */
#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */
#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */
#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */
#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */
#define SPR_SR_SM 0x00000001 /* Supervisor Mode */
 
/*
* Bit definitions for the Data MMU Control Register
*
*/
#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */
#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */
#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
#define SPR_DMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
#define SPR_DMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
 
228,8 → 189,8
* Bit definitions for the Instruction MMU Control Register
*
*/
#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */
#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */
#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
#define SPR_IMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
#define SPR_IMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
 
237,63 → 198,63
* Bit definitions for the Data TLB Match Register
*
*/
#define SPR_DTLBMR_V 0x00000001 /* Valid */
#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
#define SPR_DTLBMR_CID 0x0000003c /* Context ID */
#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */
#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */
#define SPR_DTLBMR_V 0x00000001 /* Valid */
#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
#define SPR_DTLBMR_CID 0x0000003c /* Context ID */
#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */
#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */
 
/*
* Bit definitions for the Data TLB Translate Register
*
*/
#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */
#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */
#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */
#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
#define SPR_DTLBTR_A 0x00000010 /* Accessed */
#define SPR_DTLBTR_D 0x00000020 /* Dirty */
#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */
#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */
#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */
#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */
#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */
#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */
#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */
#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */
#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
#define SPR_DTLBTR_A 0x00000010 /* Accessed */
#define SPR_DTLBTR_D 0x00000020 /* Dirty */
#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */
#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */
#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */
#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */
#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */
 
/*
* Bit definitions for the Instruction TLB Match Register
*
*/
#define SPR_ITLBMR_V 0x00000001 /* Valid */
#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
#define SPR_ITLBMR_CID 0x0000003c /* Context ID */
#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */
#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */
#define SPR_ITLBMR_V 0x00000001 /* Valid */
#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
#define SPR_ITLBMR_CID 0x0000003c /* Context ID */
#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */
#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */
 
/*
* Bit definitions for the Instruction TLB Translate Register
*
*/
#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */
#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */
#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */
#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
#define SPR_ITLBTR_A 0x00000010 /* Accessed */
#define SPR_ITLBTR_D 0x00000020 /* Dirty */
#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */
#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */
#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */
#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */
#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */
#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */
#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
#define SPR_ITLBTR_A 0x00000010 /* Accessed */
#define SPR_ITLBTR_D 0x00000020 /* Dirty */
#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */
#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */
#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */
 
/*
* Bit definitions for Data Cache Control register
*
*/
#define SPR_DCCR_EW 0x000000ff /* Enable ways */
#define SPR_DCCR_EW 0x000000ff /* Enable ways */
 
/*
* Bit definitions for Insn Cache Control register
*
*/
#define SPR_ICCR_EW 0x000000ff /* Enable ways */
#define SPR_ICCR_EW 0x000000ff /* Enable ways */
 
/*
* Bit definitions for Data Cache Configuration Register
375,7 → 336,7
#define SPR_DCR_CT_LD 0x00000080
#define SPR_DCR_CT_SD 0x000000a0
#define SPR_DCR_CT_LSEA 0x000000c0
#define SPR_DCR_CT_LSD 0x000000e0
#define SPR_DCR_CT_LSD 0x000000e0
/* SPR_DCR_CT_LSD doesn't seem to be implemented anywhere in or1ksim. 2004-1-30 HP */
 
/*
382,62 → 343,36
* Bit definitions for Debug Mode 1 register
*
*/
#define SPR_DMR1_CW 0x000fffff /* Chain register pair data */
#define SPR_DMR1_CW0_AND 0x00000001
#define SPR_DMR1_CW0_OR 0x00000002
#define SPR_DMR1_CW0 (SPR_DMR1_CW0_AND | SPR_DMR1_CW0_OR)
#define SPR_DMR1_CW1_AND 0x00000004
#define SPR_DMR1_CW1_OR 0x00000008
#define SPR_DMR1_CW1 (SPR_DMR1_CW1_AND | SPR_DMR1_CW1_OR)
#define SPR_DMR1_CW2_AND 0x00000010
#define SPR_DMR1_CW2_OR 0x00000020
#define SPR_DMR1_CW2 (SPR_DMR1_CW2_AND | SPR_DMR1_CW2_OR)
#define SPR_DMR1_CW3_AND 0x00000040
#define SPR_DMR1_CW3_OR 0x00000080
#define SPR_DMR1_CW3 (SPR_DMR1_CW3_AND | SPR_DMR1_CW3_OR)
#define SPR_DMR1_CW4_AND 0x00000100
#define SPR_DMR1_CW4_OR 0x00000200
#define SPR_DMR1_CW4 (SPR_DMR1_CW4_AND | SPR_DMR1_CW4_OR)
#define SPR_DMR1_CW5_AND 0x00000400
#define SPR_DMR1_CW5_OR 0x00000800
#define SPR_DMR1_CW5 (SPR_DMR1_CW5_AND | SPR_DMR1_CW5_OR)
#define SPR_DMR1_CW6_AND 0x00001000
#define SPR_DMR1_CW6_OR 0x00002000
#define SPR_DMR1_CW6 (SPR_DMR1_CW6_AND | SPR_DMR1_CW6_OR)
#define SPR_DMR1_CW7_AND 0x00004000
#define SPR_DMR1_CW7_OR 0x00008000
#define SPR_DMR1_CW7 (SPR_DMR1_CW7_AND | SPR_DMR1_CW7_OR)
#define SPR_DMR1_CW8_AND 0x00010000
#define SPR_DMR1_CW8_OR 0x00020000
#define SPR_DMR1_CW8 (SPR_DMR1_CW8_AND | SPR_DMR1_CW8_OR)
#define SPR_DMR1_CW9_AND 0x00040000
#define SPR_DMR1_CW9_OR 0x00080000
#define SPR_DMR1_CW9 (SPR_DMR1_CW9_AND | SPR_DMR1_CW9_OR)
#define SPR_DMR1_RES1 0x00300000 /* Reserved */
#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/
#define SPR_DMR1_BT 0x00800000 /* Branch trace */
#define SPR_DMR1_RES2 0xff000000 /* Reserved */
#define SPR_DMR1_CW0 0x00000003 /* Chain watchpoint 0 */
#define SPR_DMR1_CW1 0x0000000c /* Chain watchpoint 1 */
#define SPR_DMR1_CW2 0x00000030 /* Chain watchpoint 2 */
#define SPR_DMR1_CW3 0x000000c0 /* Chain watchpoint 3 */
#define SPR_DMR1_CW4 0x00000300 /* Chain watchpoint 4 */
#define SPR_DMR1_CW5 0x00000c00 /* Chain watchpoint 5 */
#define SPR_DMR1_CW6 0x00003000 /* Chain watchpoint 6 */
#define SPR_DMR1_CW7 0x0000c000 /* Chain watchpoint 7 */
#define SPR_DMR1_CW8 0x00030000 /* Chain watchpoint 8 */
#define SPR_DMR1_CW9 0x000c0000 /* Chain watchpoint 9 */
#define SPR_DMR1_CW10 0x00300000 /* Chain watchpoint 10 */
#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/
#define SPR_DMR1_BT 0x00800000 /* Branch trace */
#define SPR_DMR1_DXFW 0x01000000 /* Disable external force watchpoint */
 
/*
* Bit definitions for Debug Mode 2 register. AWTC and WGB corrected by JPB
* Bit definitions for Debug Mode 2 register
*
*/
#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */
#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */
#define SPR_DMR2_AWTC 0x00000ffc /* Assign watchpoints to counters */
#define SPR_DMR2_AWTC_OFF 2 /* Bit offset to AWTC field */
#define SPR_DMR2_WGB 0x003ff000 /* Watchpoints generating breakpoint */
#define SPR_DMR2_WGB_OFF 12 /* Bit offset to WGB field */
#define SPR_DMR2_WBS 0xffc00000 /* JPB: Watchpoint status */
#define SPR_DMR2_WBS_OFF 22 /* Bit offset to WBS field */
#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */
#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */
#define SPR_DMR2_AWTC 0x00001ffc /* Assign watchpoints to counters */
#define SPR_DMR2_WGB 0x00ffe000 /* Watchpoints generating breakpoint */
 
/*
* Bit definitions for Debug watchpoint counter registers
*
*/
#define SPR_DWCR_COUNT 0x0000ffff /* Count */
#define SPR_DWCR_MATCH 0xffff0000 /* Match */
#define SPR_DWCR_MATCH_OFF 16 /* Match bit offset */
#define SPR_DWCR_COUNT 0x0000ffff /* Count */
#define SPR_DWCR_MATCH 0xffff0000 /* Match */
 
/*
* Bit definitions for Debug stop register
546,7 → 481,6
#define NOP_EXIT 0x0001 /* End of simulation */
#define NOP_REPORT 0x0002 /* Simple report */
#define NOP_PRINTF 0x0003 /* Simprintf instruction */
#define NOP_PUTC 0x0004 /* JPB: Simputc instruction */
#define NOP_CNT_RESET 0x0005 /* Reset statistics counters */
#define NOP_REPORT_FIRST 0x0400 /* Report with number */
#define NOP_REPORT_LAST 0x03ff /* Report with number */
/trunk/or1ksim/tick/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libtick_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 69,7
libtick_a_LIBADD =
am_libtick_a_OBJECTS = tick.$(OBJEXT)
libtick_a_OBJECTS = $(am_libtick_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,8 → 187,10
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libtick.a
libtick_a_SOURCES = tick.c
libtick_a_SOURCES = tick.c tick.h
all: all-am
 
.SUFFIXES:
237,19 → 241,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tick.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
256,8 → 259,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
269,8 → 272,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
280,13 → 283,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
300,22 → 302,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
376,12 → 377,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
401,18 → 410,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/tick/Makefile.am
1,22 → 1,25
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libtick.a
libtick_a_SOURCES = tick.c
libtick_a_SOURCES = tick.c tick.h
/trunk/or1ksim/cuc/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
34,17 → 34,11
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
 
SOURCES = $(libcuc_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
75,7 → 69,7
memory.$(OBJEXT) verilog.$(OBJEXT) timings.$(OBJEXT) \
insn.$(OBJEXT) adv.$(OBJEXT)
libcuc_a_OBJECTS = $(am_libcuc_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
88,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
107,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
130,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
145,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
161,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
168,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
187,6 → 187,8
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libcuc.a
libcuc_a_SOURCES = cuc.c cuc.h load.c bb.c memory.c \
verilog.c timings.c insn.c insn.h adv.c
248,19 → 250,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/verilog.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
267,8 → 268,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
280,8 → 281,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
291,13 → 292,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
311,22 → 311,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
387,12 → 386,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
412,18 → 419,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/pic/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libpic_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 69,7
libpic_a_LIBADD =
am_libpic_a_OBJECTS = pic.$(OBJEXT)
libpic_a_OBJECTS = $(am_libpic_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,8 → 187,10
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libpic.a
libpic_a_SOURCES = pic.c
libpic_a_SOURCES = pic.c pic.h
all: all-am
 
.SUFFIXES:
237,19 → 241,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pic.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
256,8 → 259,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
269,8 → 272,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
280,13 → 283,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
300,22 → 302,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
376,12 → 377,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
401,18 → 410,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/pic/Makefile.am
1,22 → 1,25
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libpic.a
libpic_a_SOURCES = pic.c
libpic_a_SOURCES = pic.c pic.h
/trunk/or1ksim/pm/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libpm_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 69,7
libpm_a_LIBADD =
am_libpm_a_OBJECTS = pm.$(OBJEXT)
libpm_a_OBJECTS = $(am_libpm_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,8 → 187,10
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libpm.a
libpm_a_SOURCES = pm.c
libpm_a_SOURCES = pm.c pm.h
all: all-am
 
.SUFFIXES:
237,19 → 241,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pm.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
256,8 → 259,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
269,8 → 272,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
280,13 → 283,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
300,22 → 302,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
376,12 → 377,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
401,18 → 410,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/pm/Makefile.am
1,22 → 1,25
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libpm.a
libpm_a_SOURCES = pm.c
libpm_a_SOURCES = pm.c pm.h
/trunk/or1ksim/peripheral/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libperipheral_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
76,7 → 72,7
vga.$(OBJEXT) fb.$(OBJEXT) ps2kbd.$(OBJEXT) atahost.$(OBJEXT) \
atadevice.$(OBJEXT) atadevice_cmdi.$(OBJEXT) memory.$(OBJEXT)
libperipheral_a_OBJECTS = $(am_libperipheral_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
87,17 → 83,18
DIST_SOURCES = $(libperipheral_a_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-exec-recursive install-info-recursive \
install-recursive installcheck-recursive installdirs-recursive \
pdf-recursive ps-recursive uninstall-info-recursive \
uninstall-recursive
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
115,16 → 112,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
138,6 → 133,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
153,11 → 149,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
169,7 → 165,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
176,19 → 176,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
195,6 → 200,8
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUBDIRS = channels
noinst_LIBRARIES = libperipheral.a
libperipheral_a_SOURCES = \
210,7 → 217,25
atahost.c \
atadevice.c \
atadevice_cmdi.c \
memory.c
memory.c \
16450.h \
atacmd.h \
atadevice_cmdi.h \
atadevice.h \
atahost_define.h \
atahost.h \
crc32.h \
dma_defs.h \
dma.h \
ethernet.h \
ethernet_i.h \
fb.h \
fields.h \
gpio.h \
gpio_i.h \
mc.h \
ps2kbd.h \
vga.h
 
all: all-recursive
 
274,19 → 299,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vga.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
319,8 → 343,7
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
 
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
364,8 → 387,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
390,8 → 413,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
401,13 → 424,12
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
421,22 → 443,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
450,7 → 471,7
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(mkdir_p) "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
458,6 → 479,8
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
513,12 → 536,20
 
install-data-am:
 
install-dvi: install-dvi-recursive
 
install-exec-am:
 
install-html: install-html-recursive
 
install-info: install-info-recursive
 
install-man:
 
install-pdf: install-pdf-recursive
 
install-ps: install-ps-recursive
 
installcheck-am:
 
maintainer-clean: maintainer-clean-recursive
538,22 → 569,24
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
uninstall-info: uninstall-info-recursive
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
 
.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
clean clean-generic clean-noinstLIBRARIES clean-recursive \
ctags ctags-recursive distclean distclean-compile \
distclean-generic distclean-recursive distclean-tags distdir \
dvi dvi-am html html-am info info-am install install-am \
install-data install-data-am install-exec install-exec-am \
install-info install-info-am install-man install-strip \
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags ctags-recursive distclean \
distclean-compile distclean-generic distclean-tags distdir dvi \
dvi-am html html-am info info-am install install-am \
install-data install-data-am install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic \
maintainer-clean-recursive mostlyclean mostlyclean-compile \
mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am uninstall-info-am
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/peripheral/channels/xterm.c
4,23 → 4,26
even if there is really few in common.
Copyright (C) 2002 Richard Prescott <rip@step.polymtl.ca>
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/*
* I really dislike using stuff beginning with '_'
* They are suppose to be reserved for the compiler
98,7 → 101,7
}
 
#if defined(HAS_ON_EXIT)
#if defined(HAVE_ON_EXIT)
static void xterm_exit(int i, void * data)
{
xterm_close(data);
118,7 → 121,7
retval->fds.fdout = -1;
retval->pid = -1;
 
#if defined(HAS_ON_EXIT)
#if defined(HAVE_ON_EXIT)
/* reset cause exit(1), leaving an xterm opened */
on_exit(xterm_exit, retval);
#endif
/trunk/or1ksim/peripheral/channels/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for peripherals channels to host
#
# Copyright (C) 2002 Richard Prescott <rip@step.polymtl.ca>
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libchannels_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ../..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
75,7 → 71,7
file.$(OBJEXT) generic.$(OBJEXT) xterm.$(OBJEXT) tcp.$(OBJEXT) \
tty.$(OBJEXT)
libchannels_a_OBJECTS = $(am_libchannels_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
88,8 → 84,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
107,16 → 101,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
130,6 → 122,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
145,11 → 138,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
161,7 → 154,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
168,19 → 165,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
187,6 → 189,8
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libchannels.a
libchannels_a_SOURCES = \
channel.c \
195,7 → 199,10
generic.c \
xterm.c \
tcp.c \
tty.c
tty.c \
channel.h \
fd.h \
generic.h
 
all: all-am
 
253,19 → 260,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/xterm.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
272,8 → 278,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
285,8 → 291,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
296,13 → 302,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
316,22 → 321,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
392,12 → 396,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
417,18 → 429,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/peripheral/channels/Makefile.am
1,23 → 1,26
# Makefile -- Makefile for peripherals channels to host
#
# Copyright (C) 2002 Richard Prescott <rip@step.polymtl.ca>
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libchannels.a
libchannels_a_SOURCES = \
channel.c \
26,5 → 29,8
generic.c \
xterm.c \
tcp.c \
tty.c
tty.c \
channel.h \
fd.h \
generic.h
 
/trunk/or1ksim/peripheral/atadevice.h
202,6 → 202,6
short ata_devices_read(ata_devices *devices, char adr);
void ata_devices_write(ata_devices *devices, char adr, short value);
 
void ata_device_do_control_register(ata_device *device);
void ata_device_do_command_register(ata_device *device);
static void ata_device_do_control_register(ata_device *device);
static void ata_device_do_command_register(ata_device *device);
#endif
/trunk/or1ksim/peripheral/Makefile.am
1,23 → 1,26
# Makefile -- Makefile for peripherals simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
SUBDIRS = channels
 
noinst_LIBRARIES = libperipheral.a
34,4 → 37,22
atahost.c \
atadevice.c \
atadevice_cmdi.c \
memory.c
memory.c \
16450.h \
atacmd.h \
atadevice_cmdi.h \
atadevice.h \
atahost_define.h \
atahost.h \
crc32.h \
dma_defs.h \
dma.h \
ethernet.h \
ethernet_i.h \
fb.h \
fields.h \
gpio.h \
gpio_i.h \
mc.h \
ps2kbd.h \
vga.h
/trunk/or1ksim/mmu/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libmmu_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 69,7
libmmu_a_LIBADD =
am_libmmu_a_OBJECTS = dmmu.$(OBJEXT) immu.$(OBJEXT)
libmmu_a_OBJECTS = $(am_libmmu_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 82,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 99,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 120,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 136,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 152,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 163,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,8 → 187,10
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libmmu.a
libmmu_a_SOURCES = dmmu.c immu.c
libmmu_a_SOURCES = dmmu.c immu.c dmmu.h immu.h
all: all-am
 
.SUFFIXES:
238,19 → 242,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/immu.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
257,8 → 260,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
270,8 → 273,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
281,13 → 284,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
301,22 → 303,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
377,12 → 378,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
402,18 → 411,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/mmu/Makefile.am
1,23 → 1,26
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
 
noinst_LIBRARIES = libmmu.a
libmmu_a_SOURCES = dmmu.c immu.c
libmmu_a_SOURCES = dmmu.c immu.c dmmu.h immu.h
 
/trunk/or1ksim/vapi/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
34,17 → 34,11
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
 
SOURCES = $(libvapi_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
73,7 → 67,7
libvapi_a_LIBADD =
am_libvapi_a_OBJECTS = vapi.$(OBJEXT)
libvapi_a_OBJECTS = $(am_libvapi_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
86,8 → 80,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
105,16 → 97,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
128,6 → 118,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
143,11 → 134,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
159,7 → 150,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
166,19 → 161,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
185,6 → 185,8
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libvapi.a
libvapi_a_SOURCES = vapi.c vapi.h
all: all-am
237,19 → 239,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vapi.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
256,8 → 257,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
269,8 → 270,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
280,13 → 281,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
300,22 → 300,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
376,12 → 375,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
401,18 → 408,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/support/Makefile.in
1,8 → 1,8
# Makefile.in generated by automake 1.9.5 from Makefile.am.
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# @configure_input@
 
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005 Free Software Foundation, Inc.
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
15,36 → 15,32
@SET_MAKE@
 
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
SOURCES = $(libsupport_a_SOURCES)
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
75,7 → 71,7
profile.$(OBJEXT) sched.$(OBJEXT) debug.$(OBJEXT) \
misc.$(OBJEXT)
libsupport_a_OBJECTS = $(am_libsupport_a_OBJECTS)
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
88,8 → 84,6
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMDEP_FALSE = @AMDEP_FALSE@
AMDEP_TRUE = @AMDEP_TRUE@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
107,16 → 101,14
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@
DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@
GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@
GREP = @GREP@
INCLUDES = @INCLUDES@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
130,6 → 122,7
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_SHELL = @MAKE_SHELL@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
145,11 → 138,11
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_RANLIB = @ac_ct_RANLIB@
ac_ct_STRIP = @ac_ct_STRIP@
am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
161,7 → 154,11
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
168,19 → 165,24
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
187,8 → 189,22
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
noinst_LIBRARIES = libsupport.a
libsupport_a_SOURCES = simprintf.c dumpverilog.c profile.c sched.c debug.c misc.c
libsupport_a_SOURCES = simprintf.c \
dumpverilog.c \
profile.c \
sched.c \
debug.c \
misc.c \
dbchs.h \
debug.h \
dumpverilog.h \
misc.h \
profile.h \
sched.h
 
all: all-am
 
.SUFFIXES:
244,19 → 260,18
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/simprintf.Po@am__quote@
 
.c.o:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c $<
 
.c.obj:
@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
uninstall-info-am:
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
263,8 → 278,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
 
276,8 → 291,8
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
287,13 → 302,12
CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
307,22 → 321,21
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
list='$(DISTFILES)'; for file in $$list; do \
case $$file in \
$(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
$(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
esac; \
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkdir_p) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
383,12 → 396,20
 
install-data-am:
 
install-dvi: install-dvi-am
 
install-exec-am:
 
install-html: install-html-am
 
install-info: install-info-am
 
install-man:
 
install-pdf: install-pdf-am
 
install-ps: install-ps-am
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
408,18 → 429,22
 
ps-am:
 
uninstall-am: uninstall-info-am
uninstall-am:
 
.MAKE: install-am install-strip
 
.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES ctags distclean distclean-compile \
distclean-generic distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic pdf pdf-am ps ps-am tags uninstall \
uninstall-am uninstall-info-am
uninstall-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
/trunk/or1ksim/support/Makefile.am
1,22 → 1,36
# Makefile -- Makefile for cpu architecture independent simulation
#
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
# Copyright (C) 2008 Embecosm Limited
#
# Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by the Free
# Software Foundation; either version 3 of the License, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# This program is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
# more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
# You should have received a copy of the GNU General Public License along
# with this program. If not, see <http://www.gnu.org/licenses/>.
 
noinst_LIBRARIES = libsupport.a
libsupport_a_SOURCES = simprintf.c dumpverilog.c profile.c sched.c debug.c misc.c
 
noinst_LIBRARIES = libsupport.a
libsupport_a_SOURCES = simprintf.c \
dumpverilog.c \
profile.c \
sched.c \
debug.c \
misc.c \
dbchs.h \
debug.h \
dumpverilog.h \
misc.h \
profile.h \
sched.h
/trunk/or1ksim/support/simprintf.c
1,26 → 1,30
/* simprintf.c -- Simulator printf implementation
 
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
Copyright (C) 2008 Embecosm Limited
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com>
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3 of the License, or (at your option)
any later version.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along
with this program. If not, see <http://www.gnu.org/licenses/>. */
 
This file is part of OpenRISC 1000 Architectural Simulator.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Debugger LIBC functions. Working, but VERY, VERY ugly written.
I wrote following code when basic simulator started to work and I was
desperate to use some PRINTFs in my debugged code. And it was
also used to get some output from Dhrystone MIPS benchmark. */
/* Debugger LIBC functions. Working, but VERY, VERY ugly written. I wrote
following code when basic simulator started to work and I was desperate to
use some PRINTFs in my debugged code. And it was also used to get some
output from Dhrystone MIPS benchmark. */
 
#include <stdio.h>
#include <string.h>
107,10 → 111,16
argaddr += 4;
#else
{
char regstr[5];
sprintf(regstr, "r%"PRIxADDR, ++argaddr);
arg = evalsim_reg(atoi(regstr));
/* JPB. I can't see how the original code ever worked. It does trash
the file pointer by overwriting the end of regstr. In any case
why create a string, only to turn it back into an integer! */
 
/* orig: char regstr[5]; */
/* orig: */
/* orig: sprintf(regstr, "r%"PRIxADDR, ++argaddr); */
/* orig: arg = evalsim_reg(atoi(regstr)); */
 
arg = evalsim_reg( ++argaddr );
}
#endif
TRACE(" 4: fmtstrpart=%p fmtstrpart=%s arg=0x%08"PRIx32"\n",

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.