OpenCores
URL https://opencores.org/ocsvn/uart_block/uart_block/trunk

Subversion Repositories uart_block

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /
    from Rev 22 to Rev 23
    ↔ Reverse comparison
  •

Rev 22 → Rev 23

/uart_block/trunk/hdl/iseProject/isim.log
20,4 → 20,428
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
# exit 0
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave.vhd" Line 116
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave.vhd" Line 116
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 105
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 186
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 104
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 105
# run all
Stopped at time : 970 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 105
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 850 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 870 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 890 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 910 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 930 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 950 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 970 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 990 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 1010 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 1030 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
# run all
Stopped at time : 1050 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 161
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 910 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
Stopped at time : 990 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Stopped at time : 0 fs : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 157
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Stopped at time : 0 fs : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 157
# run all
Finished circuit initialization process.
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 157
# run all
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 10 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 157
# run all
Stopped at time : 30 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 169
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 30 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 163
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 30 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 163
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
Stopped at time : 850 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 164
# run all
Stopped at time : 930 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 164
# run all
Stopped at time : 1010 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 164
# run all
Stopped at time : 1090 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 164
# run all
Stopped at time : 1170 ns : File "/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd" Line 164
# run all
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
ISim O.87xd (signature 0x8ddf5b5d)
WARNING: A WEBPACK license was found.
WARNING: Please use Xilinx License Configuration Manager to check out a full ISim license.
WARNING: ISim will run in Lite mode. Please refer to the ISim documentation for more information on the differences between the Lite and the Full version.
This is a Lite version of ISim.
# run 1000 ms
Simulator is doing circuit initialization process.
Finished circuit initialization process.
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartControl/uDiv/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
at 10 ns(1), Instance /testuart_wishbone_slave/uut/uUartCommunicationBlocks/uBaudGen/ : Warning: There is an 'U'|'X'|'W'|'Z'|'-' in an arithmetic operand, the result will be 'X'(es).
 
** Failure:NONE. End of simulation.
User(VHDL) Code Called Simulation Stop
In process testUart_wishbone_slave.vhd:stim_proc
INFO: Simulator is stopped.
/uart_block/trunk/hdl/iseProject/testUart_control.vhd
115,9 → 115,11
WE <= '0';
start <= '0';
reg_addr <= (others => 'U');
wait for clk_period;
-- Wait some time to configure the communication block
wait for clk_period * 40;
-- Ask to send some data...(0x55)
reg_addr <= "10";
WE <= '1';
/uart_block/trunk/hdl/iseProject/uart_control.vhd
42,9 → 42,10
signal startConfigClk : std_logic;
signal startDataSend : std_logic;
signal commBlocksInitiated : std_logic;
signal finishedDataSend : std_logic;
signal doneWriteReg : std_logic;
signal startReadReg : std_logic;
signal startReadReg : std_logic;
signal alreadyConfBaud : std_logic;
signal alreadyConfClk : std_logic;
 
-- Divisor component
component divisor is
82,6 → 83,8
startConfigClk <= '0';
startDataSend <= '0';
doneWriteReg <= '0';
alreadyConfClk <= '0';
alreadyConfBaud <= '0';
elsif (WE and start) = '1' then
case reg_addr is
when "00" =>
89,18 → 92,16
startConfigClk <= '1';
startDataSend <= '0';
startConfigBaud <= '0';
alreadyConfClk <= '1';
when "01" =>
config_baud <= DAT_I;
startConfigBaud <= '1';
startDataSend <= '0';
startConfigClk <= '0';
alreadyConfBaud <= '1';
when "10" =>
-- If we have an overrun, discard the byte
if finishedDataSend = '1' then
byte_to_transmit <= DAT_I((nBits-1) downto 0);
else
byte_to_transmit <= byte_to_transmit;
end if;
byte_to_transmit <= DAT_I((nBits-1) downto 0);
startConfigBaud <= '0';
startConfigClk <= '0';
startDataSend <= '1';
150,36 → 151,30
end process;
-- Process to send data over the serial transmitter
process (startDataSend, commBlocksInitiated, clk)
process (clk)
variable cont_steps : integer range 0 to 3;
begin
if (startDataSend = '0' and commBlocksInitiated = '0') then
data_byte_tx <= (others => '0');
tx_start <= '0';
finishedDataSend <= '1';
elsif rising_edge(clk) then
if cont_steps < 3 then
cont_steps := cont_steps + 1;
else
cont_steps := 3;
if rising_edge(clk) then
if (rst = '1') then
cont_steps := 0;
else
if commBlocksInitiated = '1' and startDataSend = '1' then
case cont_steps is
when 0 =>
data_byte_tx <= byte_to_transmit;
tx_start <= '0';
when 1 =>
tx_start <= '1';
when others =>
null;
end case;
if cont_steps < 3 then
cont_steps := cont_steps + 1;
else
cont_steps := 3;
end if;
end if;
end if;
case cont_steps is
when 1 =>
data_byte_tx <= byte_to_transmit;
tx_start <= '0';
when 2 =>
tx_start <= '1';
when others =>
null;
end case;
if tx_data_sent = '1' then
finishedDataSend <= '1';
else
finishedDataSend <= '0';
end if;
end if;
end process;
223,7 → 218,7
process (startConfigBaud,startConfigClk, clk)
variable cont_steps : integer range 0 to 3;
begin
if (startConfigBaud and startConfigClk) = '0' then
if (alreadyConfClk and alreadyConfBaud) = '0' then
sigDivRst <= '1';
cont_steps := 0;
baud_wait <= (others => '0');
/uart_block/trunk/hdl/iseProject/fuse.log
1,4 → 1,4
Running: /opt/Xilinx/13.4/ISE_DS/ISE/bin/lin/unwrapped/fuse -intstyle ise -incremental -o /home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave_isim_beh.exe -prj /home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave_beh.prj work.testUart_wishbone_slave
Running: /opt/Xilinx/13.4/ISE_DS/ISE/bin/lin/unwrapped/fuse -relaunch -intstyle "ise" -incremental -o "/home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave_isim_beh.exe" -prj "/home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave_beh.prj" "work.testUart_wishbone_slave"
ISim O.87xd (signature 0x8ddf5b5d)
Number of CPUs detected in this system: 4
Turning on mult-threading, number of parallel sub-compilation jobs: 8
16,7 → 16,7
Starting static elaboration
Completed static elaboration
Fuse Memory Usage: 37476 KB
Fuse CPU Usage: 1100 ms
Fuse CPU Usage: 1090 ms
Compiling package standard
Compiling package std_logic_1164
Compiling package std_logic_arith
32,8 → 32,9
Compiling architecture behavioral of entity uart_wishbone_slave [uart_wishbone_slave_default]
Compiling architecture behavior of entity testuart_wishbone_slave
Time Resolution for simulation is 1ps.
Waiting for 1 sub-compilation(s) to finish...
Compiled 21 VHDL Units
Built simulation executable /home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave_isim_beh.exe
Fuse Memory Usage: 91188 KB
Fuse CPU Usage: 1280 ms
GCC CPU Usage: 710 ms
Fuse Memory Usage: 89272 KB
Fuse CPU Usage: 1260 ms
GCC CPU Usage: 260 ms
/uart_block/trunk/hdl/iseProject/testUart_wishbone_slave.vhd
106,7 → 106,7
WE_I <= '0';
STB_I <= '0';
ADR_I0 <= (others => 'U');
wait for CLK_I_period;
wait for CLK_I_period*40;
-- Ask to send some data...(0xC4)
ADR_I0 <= "10";
117,15 → 117,8
WE_I <= '0';
STB_I <= '0';
ADR_I0 <= (others => 'U');
wait for CLK_I_period*500;
wait for CLK_I_period*5000;
-- Receive data from serial
ADR_I0 <= "11";
WE_I <= '0';
STB_I <= '1';
wait for CLK_I_period*100; -- Error !!!!! (Should not need this!!)
 
-- Receive data... (Should work by retainning the last received value...)
-- Receive 0x55 value (01010101)
serial_in <= '0'; -- Start bit
wait for 8.68 us;
149,18 → 142,9
-- Stop bit here
serial_in <= '1';
wait for CLK_I_period*5000;
wait until ACK_O = '1';
wait for CLK_I_period*100;
STB_I <= '0';
wait for CLK_I_period*100;
-- Read byte sent...
ADR_I0 <= "10";
WE_I <= '0';
STB_I <= '1';
wait until ACK_O = '1';
wait for CLK_I_period*100;
 
-- Stop Simulation
assert false report "NONE. End of simulation." severity failure;
/uart_block/trunk/hdl/iseProject/_xmsgs/pn_parser.xmsgs
8,11 → 8,8
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
 
<messages>
<msg type="info" file="ProjectMgmt" num="1061" ><arg fmt="%s" index="1">Parsing VHDL file &quot;/home/laraujo/work/uart_block/hdl/iseProject/testUart_control.vhd&quot; into library work</arg>
<msg type="info" file="ProjectMgmt" num="1061" ><arg fmt="%s" index="1">Parsing VHDL file &quot;/home/laraujo/work/uart_block/hdl/iseProject/testUart_wishbone_slave.vhd&quot; into library work</arg>
</msg>
 
<msg type="info" file="ProjectMgmt" num="1061" ><arg fmt="%s" index="1">Parsing VHDL file &quot;/home/laraujo/work/uart_block/hdl/iseProject/uart_control.vhd&quot; into library work</arg>
</msg>
 
</messages>
 
/uart_block/trunk/hdl/iseProject/iseProject.xise
16,7 → 16,7
 
<files>
<file xil_pn:name="serial_transmitter.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="pkgDefinitions.vhd" xil_pn:type="FILE_VHDL">
30,7 → 30,7
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="21"/>
</file>
<file xil_pn:name="serial_receiver.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="testSerial_receiver.vhd" xil_pn:type="FILE_VHDL">
40,7 → 40,7
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="40"/>
</file>
<file xil_pn:name="divisor.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="testDivisor.vhd" xil_pn:type="FILE_VHDL">
50,7 → 50,7
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="43"/>
</file>
<file xil_pn:name="baud_generator.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="5"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="testBaud_generator.vhd" xil_pn:type="FILE_VHDL">
60,7 → 60,7
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="66"/>
</file>
<file xil_pn:name="uart_control.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="6"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
<file xil_pn:name="testUart_communication_block.vhd" xil_pn:type="FILE_VHDL">
70,21 → 70,21
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="103"/>
</file>
<file xil_pn:name="uart_communication_blocks.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="7"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="testUart_control.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="4"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="117"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="117"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="117"/>
</file>
<file xil_pn:name="uart_wishbone_slave.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="8"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="Implementation" xil_pn:seqID="0"/>
</file>
<file xil_pn:name="testUart_wishbone_slave.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="9"/>
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="0"/>
<association xil_pn:name="PostMapSimulation" xil_pn:seqID="164"/>
<association xil_pn:name="PostRouteSimulation" xil_pn:seqID="164"/>
<association xil_pn:name="PostTranslateSimulation" xil_pn:seqID="164"/>
313,8 → 313,8
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Module Instance Name" xil_pn:value="/testUart_wishbone_slave" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="work.testUart_wishbone_slave" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Module Instance Name" xil_pn:value="/testUart_control" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="work.testUart_control" xil_pn:valueState="non-default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
330,7 → 330,7
<property xil_pn:name="Slice Packing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="work.testUart_wishbone_slave" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="work.testUart_control" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
379,7 → 379,7
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="Architecture|testUart_wishbone_slave|behavior" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="Architecture|testUart_control|behavior" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="iseProject" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="spartan3e" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.