URL
https://opencores.org/ocsvn/dbg_interface/dbg_interface/trunk
Subversion Repositories dbg_interface
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 77 to Rev 78
- ↔ Reverse comparison
Rev 77 → Rev 78
/tags/old_debug/rtl/verilog/tap_top.v
0,0 → 1,632
////////////////////////////////////////////////////////////////////// |
//// //// |
//// tap_top.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/projects/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000, 2001, 2002 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.9 2003/10/23 16:17:02 mohor |
// CRC logic changed. |
// |
// Revision 1.8 2003/10/21 09:48:31 simons |
// Mbist support added. |
// |
// Revision 1.7 2002/11/06 14:30:10 mohor |
// Trst active high. Inverted on higher layer. |
// |
// Revision 1.6 2002/04/22 12:55:56 mohor |
// tdo_padoen_o changed to tdo_padoe_o. Signal is active high. |
// |
// Revision 1.5 2002/03/26 14:23:38 mohor |
// Signal tdo_padoe_o changed back to tdo_padoen_o. |
// |
// Revision 1.4 2002/03/25 13:16:15 mohor |
// tdo_padoen_o changed to tdo_padoe_o. Signal was always active high, just |
// not named correctly. |
// |
// Revision 1.3 2002/03/12 14:30:05 mohor |
// Few outputs for boundary scan chain added. |
// |
// Revision 1.2 2002/03/12 10:31:53 mohor |
// tap_top and dbg_top modules are put into two separate modules. tap_top |
// contains only tap state machine and related logic. dbg_top contains all |
// logic necessery for debugging. |
// |
// Revision 1.1 2002/03/08 15:28:16 mohor |
// Structure changed. Hooks for jtag chain added. |
// |
// |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
// Top module |
module tap_top( |
// JTAG pins |
tms_pad_i, tck_pad_i, trst_pad_i, tdi_pad_i, tdo_pad_o, tdo_padoe_o, |
|
// TAP states |
ShiftDR, Exit1DR, UpdateDR, UpdateDR_q, CaptureDR, SelectDRScan, |
|
// Instructions |
IDCODESelected, CHAIN_SELECTSelected, DEBUGSelected, EXTESTSelected, MBISTSelected, |
|
// TDO from dbg module |
TDOData_dbg, BypassRegister, |
|
// From Boundary Scan Chain |
bs_chain_i, |
|
// From Mbist Chain |
mbist_so_i, |
|
// Selected chains |
RegisterScanChain, |
CpuDebugScanChain0, |
CpuDebugScanChain1, |
CpuDebugScanChain2, |
CpuDebugScanChain3, |
WishboneScanChain |
|
|
|
); |
|
parameter Tp = 1; |
|
// JTAG pins |
input tms_pad_i; // JTAG test mode select pad |
input tck_pad_i; // JTAG test clock pad |
input trst_pad_i; // JTAG test reset pad |
input tdi_pad_i; // JTAG test data input pad |
output tdo_pad_o; // JTAG test data output pad |
output tdo_padoe_o; // Output enable for JTAG test data output pad |
|
// TAP states |
output ShiftDR; |
output Exit1DR; |
output UpdateDR; |
output UpdateDR_q; |
output CaptureDR; |
output SelectDRScan; |
|
// Instructions |
output IDCODESelected; |
output CHAIN_SELECTSelected; |
output DEBUGSelected; |
output EXTESTSelected; |
output MBISTSelected; |
|
input TDOData_dbg; |
output BypassRegister; |
|
// From Boundary Scan Chain |
input bs_chain_i; |
|
// From Mbist Chain |
input mbist_so_i; |
|
// Selected chains |
input RegisterScanChain; |
input CpuDebugScanChain0; |
input CpuDebugScanChain1; |
input CpuDebugScanChain2; |
input CpuDebugScanChain3; |
input WishboneScanChain; |
|
|
reg tdo_pad_o; |
|
// TAP states |
reg TestLogicReset; |
reg RunTestIdle; |
reg SelectDRScan; |
reg CaptureDR; |
reg ShiftDR; |
reg Exit1DR; |
reg PauseDR; |
reg Exit2DR; |
reg UpdateDR; |
|
reg SelectIRScan; |
reg CaptureIR; |
reg ShiftIR; |
reg Exit1IR; |
reg PauseIR; |
reg Exit2IR; |
reg UpdateIR; |
|
|
// Defining which instruction is selected |
reg EXTESTSelected; |
reg SAMPLE_PRELOADSelected; |
reg IDCODESelected; |
reg CHAIN_SELECTSelected; |
reg MBISTSelected; |
reg CLAMPSelected; |
reg CLAMPZSelected; |
reg HIGHZSelected; |
reg DEBUGSelected; |
reg BYPASSSelected; |
|
reg BypassRegister; // Bypass register |
|
wire trst; |
wire tck; |
wire TMS; |
wire tdi; |
|
|
assign trst = trst_pad_i; // trst_pad_i is active high !!! Inverted on higher layer |
assign tck = tck_pad_i; |
assign TMS = tms_pad_i; |
assign tdi = tdi_pad_i; |
|
|
/********************************************************************************** |
* * |
* TAP State Machine: Fully JTAG compliant * |
* * |
**********************************************************************************/ |
|
// TestLogicReset state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
TestLogicReset<=#Tp 1; |
else |
begin |
if(TMS & (TestLogicReset | SelectIRScan)) |
TestLogicReset<=#Tp 1; |
else |
TestLogicReset<=#Tp 0; |
end |
end |
|
// RunTestIdle state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
RunTestIdle<=#Tp 0; |
else |
if(~TMS & (TestLogicReset | RunTestIdle | UpdateDR | UpdateIR)) |
RunTestIdle<=#Tp 1; |
else |
RunTestIdle<=#Tp 0; |
end |
|
// SelectDRScan state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
SelectDRScan<=#Tp 0; |
else |
if(TMS & (RunTestIdle | UpdateDR | UpdateIR)) |
SelectDRScan<=#Tp 1; |
else |
SelectDRScan<=#Tp 0; |
end |
|
// CaptureDR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
CaptureDR<=#Tp 0; |
else |
if(~TMS & SelectDRScan) |
CaptureDR<=#Tp 1; |
else |
CaptureDR<=#Tp 0; |
end |
|
// ShiftDR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
ShiftDR<=#Tp 0; |
else |
if(~TMS & (CaptureDR | ShiftDR | Exit2DR)) |
ShiftDR<=#Tp 1; |
else |
ShiftDR<=#Tp 0; |
end |
|
// Exit1DR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
Exit1DR<=#Tp 0; |
else |
if(TMS & (CaptureDR | ShiftDR)) |
Exit1DR<=#Tp 1; |
else |
Exit1DR<=#Tp 0; |
end |
|
// PauseDR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
PauseDR<=#Tp 0; |
else |
if(~TMS & (Exit1DR | PauseDR)) |
PauseDR<=#Tp 1; |
else |
PauseDR<=#Tp 0; |
end |
|
// Exit2DR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
Exit2DR<=#Tp 0; |
else |
if(TMS & PauseDR) |
Exit2DR<=#Tp 1; |
else |
Exit2DR<=#Tp 0; |
end |
|
// UpdateDR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
UpdateDR<=#Tp 0; |
else |
if(TMS & (Exit1DR | Exit2DR)) |
UpdateDR<=#Tp 1; |
else |
UpdateDR<=#Tp 0; |
end |
|
// Delayed UpdateDR state |
reg UpdateDR_q; |
always @ (posedge tck) |
begin |
UpdateDR_q<=#Tp UpdateDR; |
end |
|
// SelectIRScan state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
SelectIRScan<=#Tp 0; |
else |
if(TMS & SelectDRScan) |
SelectIRScan<=#Tp 1; |
else |
SelectIRScan<=#Tp 0; |
end |
|
// CaptureIR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
CaptureIR<=#Tp 0; |
else |
if(~TMS & SelectIRScan) |
CaptureIR<=#Tp 1; |
else |
CaptureIR<=#Tp 0; |
end |
|
// ShiftIR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
ShiftIR<=#Tp 0; |
else |
if(~TMS & (CaptureIR | ShiftIR | Exit2IR)) |
ShiftIR<=#Tp 1; |
else |
ShiftIR<=#Tp 0; |
end |
|
// Exit1IR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
Exit1IR<=#Tp 0; |
else |
if(TMS & (CaptureIR | ShiftIR)) |
Exit1IR<=#Tp 1; |
else |
Exit1IR<=#Tp 0; |
end |
|
// PauseIR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
PauseIR<=#Tp 0; |
else |
if(~TMS & (Exit1IR | PauseIR)) |
PauseIR<=#Tp 1; |
else |
PauseIR<=#Tp 0; |
end |
|
// Exit2IR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
Exit2IR<=#Tp 0; |
else |
if(TMS & PauseIR) |
Exit2IR<=#Tp 1; |
else |
Exit2IR<=#Tp 0; |
end |
|
// UpdateIR state |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
UpdateIR<=#Tp 0; |
else |
if(TMS & (Exit1IR | Exit2IR)) |
UpdateIR<=#Tp 1; |
else |
UpdateIR<=#Tp 0; |
end |
|
/********************************************************************************** |
* * |
* End: TAP State Machine * |
* * |
**********************************************************************************/ |
|
|
|
/********************************************************************************** |
* * |
* JTAG_IR: JTAG Instruction Register * |
* * |
**********************************************************************************/ |
wire [1:0]Status = 2'b10; // Holds current chip status. Core should return this status. For now a constant is used. |
|
reg [`IR_LENGTH-1:0]JTAG_IR; // Instruction register |
reg [`IR_LENGTH-1:0]LatchedJTAG_IR; |
|
reg TDOInstruction; |
|
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
JTAG_IR[`IR_LENGTH-1:0] <= #Tp 0; |
else |
if(CaptureIR) |
begin |
JTAG_IR[1:0] <= #Tp 2'b01; // This value is fixed for easier fault detection |
JTAG_IR[3:2] <= #Tp Status[1:0]; // Current status of chip |
end |
else |
if(ShiftIR) |
JTAG_IR[`IR_LENGTH-1:0] <= #Tp {tdi, JTAG_IR[`IR_LENGTH-1:1]}; |
end |
|
|
//TDO is changing on the falling edge of tck |
always @ (negedge tck or posedge trst) |
begin |
if (trst) |
TDOInstruction <= #Tp 1'b0; |
else if(ShiftIR) |
TDOInstruction <= #Tp JTAG_IR[0]; |
end |
|
/********************************************************************************** |
* * |
* End: JTAG_IR * |
* * |
**********************************************************************************/ |
|
|
/********************************************************************************** |
* * |
* JTAG_DR: JTAG Data Register * |
* * |
**********************************************************************************/ |
reg [`DR_LENGTH-1:0]JTAG_DR_IN; // Data register |
|
|
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
JTAG_DR_IN[`DR_LENGTH-1:0]<=#Tp 0; |
else |
if(IDCODESelected) // To save space JTAG_DR_IN is also used for shifting out IDCODE |
begin |
if(ShiftDR) |
JTAG_DR_IN[31:0] <= #Tp {tdi, JTAG_DR_IN[31:1]}; |
else |
JTAG_DR_IN[31:0] <= #Tp `IDCODE_VALUE; |
end |
else |
if(CHAIN_SELECTSelected & ShiftDR) |
JTAG_DR_IN[11:0] <= #Tp {tdi, JTAG_DR_IN[11:1]}; |
else |
if(DEBUGSelected & ShiftDR) |
begin |
if(CpuDebugScanChain0 | CpuDebugScanChain1 | CpuDebugScanChain2 | CpuDebugScanChain3 | WishboneScanChain) |
JTAG_DR_IN[72:0] <= #Tp {tdi, JTAG_DR_IN[72:1]}; |
else |
if(RegisterScanChain) |
JTAG_DR_IN[45:0] <= #Tp {tdi, JTAG_DR_IN[45:1]}; |
end |
end |
|
|
|
/********************************************************************************** |
* * |
* End: JTAG_DR * |
* * |
**********************************************************************************/ |
|
|
|
|
|
/********************************************************************************** |
* * |
* Bypass logic * |
* * |
**********************************************************************************/ |
reg TDOBypassed; |
|
always @ (posedge tck or posedge trst) |
begin |
if (trst) |
BypassRegister<=#Tp 1'b0; |
else if(ShiftDR) |
BypassRegister<=#Tp tdi; |
end |
|
always @ (negedge tck) |
begin |
TDOBypassed<=#Tp BypassRegister; |
end |
/********************************************************************************** |
* * |
* End: Bypass logic * |
* * |
**********************************************************************************/ |
|
|
|
|
|
/********************************************************************************** |
* * |
* Activating Instructions * |
* * |
**********************************************************************************/ |
|
// Updating JTAG_IR (Instruction Register) |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
LatchedJTAG_IR <=#Tp `IDCODE; // IDCODE selected after reset |
else |
if(UpdateIR) |
LatchedJTAG_IR <=#Tp JTAG_IR; |
end |
|
/********************************************************************************** |
* * |
* End: Activating Instructions * |
* * |
**********************************************************************************/ |
|
|
// Updating JTAG_IR (Instruction Register) |
always @ (LatchedJTAG_IR) |
begin |
EXTESTSelected = 0; |
SAMPLE_PRELOADSelected = 0; |
IDCODESelected = 0; |
CHAIN_SELECTSelected = 0; |
MBISTSelected = 0; |
CLAMPSelected = 0; |
CLAMPZSelected = 0; |
HIGHZSelected = 0; |
DEBUGSelected = 0; |
BYPASSSelected = 0; |
|
case(LatchedJTAG_IR) |
`EXTEST: EXTESTSelected = 1; // External test |
`SAMPLE_PRELOAD: SAMPLE_PRELOADSelected = 1; // Sample preload |
`IDCODE: IDCODESelected = 1; // ID Code |
`CHAIN_SELECT: CHAIN_SELECTSelected = 1; // Chain select |
`MBIST: MBISTSelected = 1; // Mbist test |
`CLAMP: CLAMPSelected = 1; // Clamp |
`CLAMPZ: CLAMPZSelected = 1; // ClampZ |
`HIGHZ: HIGHZSelected = 1; // High Z |
`DEBUG: DEBUGSelected = 1; // Debug |
`BYPASS: BYPASSSelected = 1; // BYPASS |
default: BYPASSSelected = 1; // BYPASS |
endcase |
end |
|
|
|
/********************************************************************************** |
* * |
* Multiplexing TDO data * |
* * |
**********************************************************************************/ |
|
// This multiplexer can be expanded with number of user registers |
always @ (LatchedJTAG_IR or TDOInstruction or TDOData_dbg or TDOBypassed or bs_chain_i or mbist_so_i or ShiftIR or Exit1IR) |
begin |
if(ShiftIR | Exit1IR) |
tdo_pad_o <=#Tp TDOInstruction; |
else |
begin |
case(LatchedJTAG_IR) |
`IDCODE: tdo_pad_o <=#Tp TDOData_dbg; // Reading ID code |
`CHAIN_SELECT: tdo_pad_o <=#Tp TDOData_dbg; // Selecting the chain |
`DEBUG: tdo_pad_o <=#Tp TDOData_dbg; // Debug |
`SAMPLE_PRELOAD: tdo_pad_o <=#Tp bs_chain_i; // Sampling/Preloading |
`EXTEST: tdo_pad_o <=#Tp bs_chain_i; // External test |
`MBIST: tdo_pad_o <=#Tp mbist_so_i; // Mbist test |
default: tdo_pad_o <=#Tp TDOBypassed; // BYPASS instruction |
endcase |
end |
end |
|
// Tristate control for tdo_pad_o pin |
assign tdo_padoe_o = ShiftIR | ShiftDR | Exit1IR | Exit1DR | UpdateDR; |
|
/********************************************************************************** |
* * |
* End: Multiplexing TDO data * |
* * |
**********************************************************************************/ |
|
endmodule |
/tags/old_debug/rtl/verilog/dbg_top.v
0,0 → 1,1239
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_top.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/projects/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is available in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001, 2002 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.32 2003/09/18 14:00:47 simons |
// Lower two address lines must be always zero. |
// |
// Revision 1.31 2003/09/17 14:38:57 simons |
// WB_CNTL register added, some syncronization fixes. |
// |
// Revision 1.30 2003/08/28 13:55:22 simons |
// Three more chains added for cpu debug access. |
// |
// Revision 1.29 2003/07/31 12:19:49 simons |
// Multiple cpu support added. |
// |
// Revision 1.28 2002/11/06 14:22:41 mohor |
// Trst signal is not inverted here any more. Inverted on higher layer !!!. |
// |
// Revision 1.27 2002/10/10 02:42:55 mohor |
// WISHBONE Scan Chain is changed to reflect state of the WISHBONE access (WBInProgress bit added). |
// Internal counter is used (counts 256 wb_clk cycles) and when counter exceeds that value, |
// wb_cyc_o is negated. |
// |
// Revision 1.26 2002/05/07 14:43:59 mohor |
// mon_cntl_o signals that controls monitor mux added. |
// |
// Revision 1.25 2002/04/22 12:54:11 mohor |
// Signal names changed to lower case. |
// |
// Revision 1.24 2002/04/17 13:17:01 mohor |
// Intentional error removed. |
// |
// Revision 1.23 2002/04/17 11:16:33 mohor |
// A block for checking possible simulation/synthesis missmatch added. |
// |
// Revision 1.22 2002/03/12 10:31:53 mohor |
// tap_top and dbg_top modules are put into two separate modules. tap_top |
// contains only tap state machine and related logic. dbg_top contains all |
// logic necessery for debugging. |
// |
// Revision 1.21 2002/03/08 15:28:16 mohor |
// Structure changed. Hooks for jtag chain added. |
// |
// Revision 1.20 2002/02/06 12:23:09 mohor |
// LatchedJTAG_IR used when muxing TDO instead of JTAG_IR. |
// |
// Revision 1.19 2002/02/05 13:34:51 mohor |
// Stupid bug that was entered by previous update fixed. |
// |
// Revision 1.18 2002/02/05 12:41:01 mohor |
// trst synchronization is not needed and was removed. |
// |
// Revision 1.17 2002/01/25 07:58:35 mohor |
// IDCODE bug fixed, chains reused to decreas size of core. Data is shifted-in |
// not filled-in. Tested in hw. |
// |
// Revision 1.16 2001/12/20 11:17:26 mohor |
// TDO and TDO Enable signal are separated into two signals. |
// |
// Revision 1.15 2001/12/05 13:28:21 mohor |
// trst signal is synchronized to wb_clk_i. |
// |
// Revision 1.14 2001/11/28 09:36:15 mohor |
// Register length fixed. |
// |
// Revision 1.13 2001/11/27 13:37:43 mohor |
// CRC is returned when chain selection data is transmitted. |
// |
// Revision 1.12 2001/11/26 10:47:09 mohor |
// Crc generation is different for read or write commands. Small synthesys fixes. |
// |
// Revision 1.11 2001/11/14 10:10:41 mohor |
// Wishbone data latched on wb_clk_i instead of risc_clk. |
// |
// Revision 1.10 2001/11/12 01:11:27 mohor |
// Reset signals are not combined any more. |
// |
// Revision 1.9 2001/10/19 11:40:01 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.8 2001/10/17 10:39:03 mohor |
// bs_chain_o added. |
// |
// Revision 1.7 2001/10/16 10:09:56 mohor |
// Signal names changed to lowercase. |
// |
// |
// Revision 1.6 2001/10/15 09:55:47 mohor |
// Wishbone interface added, few fixes for better performance, |
// hooks for boundary scan testing added. |
// |
// Revision 1.5 2001/09/24 14:06:42 mohor |
// Changes connected to the OpenRISC access (SPR read, SPR write). |
// |
// Revision 1.4 2001/09/20 10:11:25 mohor |
// Working version. Few bugs fixed, comments added. |
// |
// Revision 1.3 2001/09/19 11:55:13 mohor |
// Asynchronous set/reset not used in trace any more. |
// |
// Revision 1.2 2001/09/18 14:13:47 mohor |
// Trace fixed. Some registers changed, trace simplified. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.3 2001/06/01 22:22:35 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.2 2001/05/18 13:10:00 mohor |
// Headers changed. All additional information is now avaliable in the README.txt file. |
// |
// Revision 1.1.1.1 2001/05/18 06:35:02 mohor |
// Initial release |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
// Top module |
module dbg_top( |
|
// CPU signals |
cpu_clk_i, cpu_addr_o, cpu_data_i, cpu_data_o, wp_i, |
bp_i, opselect_o, lsstatus_i, istatus_i, |
cpu_stall_o, cpu_stall_all_o, cpu_sel_o, reset_o, |
|
// WISHBONE common signals |
wb_rst_i, wb_clk_i, |
|
// WISHBONE master interface |
wb_adr_o, wb_dat_o, wb_dat_i, wb_cyc_o, wb_stb_o, wb_sel_o, |
wb_we_o, wb_ack_i, wb_cab_o, wb_err_i, |
|
// TAP states |
ShiftDR, Exit1DR, UpdateDR, UpdateDR_q, SelectDRScan, |
|
// Instructions |
IDCODESelected, CHAIN_SELECTSelected, DEBUGSelected, |
|
// TAP signals |
trst_in, tck, tdi, TDOData, |
|
BypassRegister, |
|
// Monitor mux control |
mon_cntl_o, |
|
// Selected chains |
RegisterScanChain, |
CpuDebugScanChain0, |
CpuDebugScanChain1, |
CpuDebugScanChain2, |
CpuDebugScanChain3, |
WishboneScanChain |
|
|
|
); |
|
parameter Tp = 1; |
|
|
// CPU signals |
input cpu_clk_i; // Master clock (CPU clock) |
input [31:0] cpu_data_i; // CPU data inputs (data that is written to the CPU registers) |
input [10:0] wp_i; // Watchpoint inputs |
input bp_i; // Breakpoint input |
input [3:0] lsstatus_i; // Load/store status inputs |
input [1:0] istatus_i; // Instruction status inputs |
output [31:0] cpu_addr_o; // CPU address output (for adressing registers within CPU) |
output [31:0] cpu_data_o; // CPU data output (data read from cpu registers) |
output [`OPSELECTWIDTH-1:0] opselect_o; // Operation selection (selecting what kind of data is set to the cpu_data_i) |
output cpu_stall_o; // Stalls the selected CPU |
output cpu_stall_all_o; // Stalls all the rest CPUs |
output [`CPU_NUM-1:0] cpu_sel_o; // Stalls all the rest CPUs |
output reset_o; // Resets the CPU |
|
|
// WISHBONE common signals |
input wb_rst_i; // WISHBONE reset |
input wb_clk_i; // WISHBONE clock |
|
// WISHBONE master interface |
output [31:0] wb_adr_o; |
output [31:0] wb_dat_o; |
input [31:0] wb_dat_i; |
output wb_cyc_o; |
output wb_stb_o; |
output [3:0] wb_sel_o; |
output wb_we_o; |
input wb_ack_i; |
output wb_cab_o; |
input wb_err_i; |
|
// TAP states |
input ShiftDR; |
input Exit1DR; |
input UpdateDR; |
input UpdateDR_q; |
input SelectDRScan; |
|
input trst_in; |
input tck; |
input tdi; |
|
input BypassRegister; |
|
output TDOData; |
output [3:0] mon_cntl_o; |
|
// Defining which instruction is selected |
input IDCODESelected; |
input CHAIN_SELECTSelected; |
input DEBUGSelected; |
|
// Selected chains |
output RegisterScanChain; |
output CpuDebugScanChain0; |
output CpuDebugScanChain1; |
output CpuDebugScanChain2; |
output CpuDebugScanChain3; |
output WishboneScanChain; |
|
reg wb_cyc_o; |
|
reg [31:0] ADDR; |
reg [31:0] DataOut; |
|
reg [`OPSELECTWIDTH-1:0] opselect_o; // Operation selection (selecting what kind of data is set to the cpu_data_i) |
|
reg [`CHAIN_ID_LENGTH-1:0] Chain; // Selected chain |
reg [31:0] DataReadLatch; // Data when reading register or CPU is latched one cpu_clk_i clock after the data is read. |
reg RegAccessTck; // Indicates access to the registers (read or write) |
reg CPUAccessTck0; // Indicates access to the CPU (read or write) |
reg CPUAccessTck1; // Indicates access to the CPU (read or write) |
reg CPUAccessTck2; // Indicates access to the CPU (read or write) |
reg CPUAccessTck3; // Indicates access to the CPU (read or write) |
reg [7:0] BitCounter; // Counting bits in the ShiftDR and Exit1DR stages |
reg RW; // Read/Write bit |
reg CrcMatch; // The crc that is shifted in and the internaly calculated crc are equal |
reg CrcMatch_q; |
|
reg RegAccess_q; // Delayed signals used for accessing the registers |
reg RegAccess_q2; // Delayed signals used for accessing the registers |
reg CPUAccess_q; // Delayed signals used for accessing the CPU |
reg CPUAccess_q2; // Delayed signals used for accessing the CPU |
reg CPUAccess_q3; // Delayed signals used for accessing the CPU |
|
reg wb_AccessTck; // Indicates access to the WISHBONE |
reg [31:0] WBReadLatch; // Data latched during WISHBONE read |
reg WBErrorLatch; // Error latched during WISHBONE read |
reg WBInProgress; // WISHBONE access is in progress |
reg [7:0] WBAccessCounter; // Counting access cycles. WBInProgress is cleared to 0 after counter exceeds 0xff |
wire WBAccessCounterExceed; // Marks when the WBAccessCounter exceeds max value (oxff) |
reg WBInProgress_sync1; // Synchronizing WBInProgress |
reg WBInProgress_tck; // Synchronizing WBInProgress to tck clock signal |
|
wire trst; |
|
|
wire [31:0] RegDataIn; // Data from registers (read data) |
wire [`CRC_LENGTH-1:0] CalculatedCrcOut; // CRC calculated in this module. This CRC is apended at the end of the TDO. |
|
wire CpuStall_reg; // CPU is stalled by setting the register bit |
wire CpuReset_reg; // CPU is reset by setting the register bit |
wire CpuStall_trace; // CPU is stalled by trace module |
|
|
wire CpuStall_read_access_0; // Stalling Cpu because of the read access (SPR read) |
wire CpuStall_read_access_1; // Stalling Cpu because of the read access (SPR read) |
wire CpuStall_read_access_2; // Stalling Cpu because of the read access (SPR read) |
wire CpuStall_read_access_3; // Stalling Cpu because of the read access (SPR read) |
wire CpuStall_write_access_0; // Stalling Cpu because of the write access (SPR write) |
wire CpuStall_write_access_1; // Stalling Cpu because of the write access (SPR write) |
wire CpuStall_write_access_2; // Stalling Cpu because of the write access (SPR write) |
wire CpuStall_write_access_3; // Stalling Cpu because of the write access (SPR write) |
wire CpuStall_access; // Stalling Cpu because of the read or write access |
|
wire BitCounter_Lt4; |
wire BitCounter_Eq5; |
wire BitCounter_Eq32; |
wire BitCounter_Lt38; |
wire BitCounter_Lt65; |
|
|
|
// This signals are used only when TRACE is used in the design |
`ifdef TRACE_ENABLED |
wire [39:0] TraceChain; // Chain that comes from trace module |
reg ReadBuffer_Tck; // Command for incrementing the trace read pointer (synchr with tck) |
wire ReadTraceBuffer; // Command for incrementing the trace read pointer (synchr with MClk) |
reg ReadTraceBuffer_q; // Delayed command for incrementing the trace read pointer (synchr with MClk) |
wire ReadTraceBufferPulse; // Pulse for reading the trace buffer (valid for only one Mclk command) |
|
// Outputs from registers |
wire ContinMode; // Trace working in continous mode |
wire TraceEnable; // Trace enabled |
|
wire [10:0] WpTrigger; // Watchpoint starts trigger |
wire BpTrigger; // Breakpoint starts trigger |
wire [3:0] LSSTrigger; // Load/store status starts trigger |
wire [1:0] ITrigger; // Instruction status starts trigger |
wire [1:0] TriggerOper; // Trigger operation |
|
wire WpTriggerValid; // Watchpoint trigger is valid |
wire BpTriggerValid; // Breakpoint trigger is valid |
wire LSSTriggerValid; // Load/store status trigger is valid |
wire ITriggerValid; // Instruction status trigger is valid |
|
wire [10:0] WpQualif; // Watchpoint starts qualifier |
wire BpQualif; // Breakpoint starts qualifier |
wire [3:0] LSSQualif; // Load/store status starts qualifier |
wire [1:0] IQualif; // Instruction status starts qualifier |
wire [1:0] QualifOper; // Qualifier operation |
|
wire WpQualifValid; // Watchpoint qualifier is valid |
wire BpQualifValid; // Breakpoint qualifier is valid |
wire LSSQualifValid; // Load/store status qualifier is valid |
wire IQualifValid; // Instruction status qualifier is valid |
|
wire [10:0] WpStop; // Watchpoint stops recording of the trace |
wire BpStop; // Breakpoint stops recording of the trace |
wire [3:0] LSSStop; // Load/store status stops recording of the trace |
wire [1:0] IStop; // Instruction status stops recording of the trace |
wire [1:0] StopOper; // Stop operation |
|
wire WpStopValid; // Watchpoint stop is valid |
wire BpStopValid; // Breakpoint stop is valid |
wire LSSStopValid; // Load/store status stop is valid |
wire IStopValid; // Instruction status stop is valid |
|
wire RecordPC; // Recording program counter |
wire RecordLSEA; // Recording load/store effective address |
wire RecordLDATA; // Recording load data |
wire RecordSDATA; // Recording store data |
wire RecordReadSPR; // Recording read SPR |
wire RecordWriteSPR; // Recording write SPR |
wire RecordINSTR; // Recording instruction |
|
// End: Outputs from registers |
|
wire TraceTestScanChain; // Trace Test Scan chain selected |
wire [47:0] Trace_Data; // Trace data |
|
wire [`OPSELECTWIDTH-1:0]opselect_trace;// Operation selection (trace selecting what kind of |
// data is set to the cpu_data_i) |
wire BitCounter_Lt40; |
|
`endif |
|
|
assign trst = trst_in; // trst_pad_i is active high !!! Inverted on higher layer. |
|
|
/********************************************************************************** |
* * |
* JTAG_DR: JTAG Data Register * |
* * |
**********************************************************************************/ |
reg [`DR_LENGTH-1:0]JTAG_DR_IN; // Data register |
reg TDOData; |
|
|
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
JTAG_DR_IN[`DR_LENGTH-1:0]<=#Tp 0; |
else |
if(IDCODESelected) // To save space JTAG_DR_IN is also used for shifting out IDCODE |
begin |
if(ShiftDR) |
JTAG_DR_IN[31:0] <= #Tp {tdi, JTAG_DR_IN[31:1]}; |
else |
JTAG_DR_IN[31:0] <= #Tp `IDCODE_VALUE; |
end |
else |
if(CHAIN_SELECTSelected & ShiftDR) |
JTAG_DR_IN[12:0] <= #Tp {tdi, JTAG_DR_IN[12:1]}; |
else |
if(DEBUGSelected & ShiftDR) |
begin |
if(CpuDebugScanChain0 | CpuDebugScanChain1 | |
CpuDebugScanChain2 | CpuDebugScanChain3 | WishboneScanChain) |
JTAG_DR_IN[73:0] <= #Tp {tdi, JTAG_DR_IN[73:1]}; |
else |
if(RegisterScanChain) |
JTAG_DR_IN[46:0] <= #Tp {tdi, JTAG_DR_IN[46:1]}; |
end |
end |
|
wire [73:0] CPU_Data; |
wire [46:0] Register_Data; |
wire [73:0] WISHBONE_Data; |
wire [12:0] chain_sel_data; |
wire wb_Access_wbClk; |
wire [1:0] wb_cntl_o; |
|
|
reg crc_bypassed; |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
crc_bypassed <= 0; |
else if (CHAIN_SELECTSelected) |
crc_bypassed <=#Tp 1; |
else if( |
RegisterScanChain & BitCounter_Eq5 | |
CpuDebugScanChain0 & BitCounter_Eq32 | |
CpuDebugScanChain1 & BitCounter_Eq32 | |
CpuDebugScanChain2 & BitCounter_Eq32 | |
CpuDebugScanChain3 & BitCounter_Eq32 | |
WishboneScanChain & BitCounter_Eq32 ) |
crc_bypassed <=#Tp tdi; // when write is performed. |
end |
|
reg [7:0] send_crc; |
wire [7:0] CalculatedCrcIn; // crc calculated from the input data (shifted in) |
|
// Calculated CRC is returned when read operation is performed, else received crc is returned (loopback). |
always @ (crc_bypassed or CrcMatch or CrcMatch_q or BypassRegister or CalculatedCrcOut) |
begin |
if (crc_bypassed) |
begin |
if (CrcMatch | CrcMatch_q) // When crc is looped back, first bit is not inverted |
send_crc = {8{BypassRegister}}; // since it caused the error. By inverting it we would |
else // get ok crc. |
send_crc = {8{~BypassRegister}}; |
end |
else |
begin |
if (CrcMatch) |
send_crc = {8{CalculatedCrcOut}}; |
else |
send_crc = {8{~CalculatedCrcOut}}; |
end |
end |
|
assign CPU_Data = {send_crc, DataReadLatch, 33'h0, 1'b0}; |
assign Register_Data = {send_crc, DataReadLatch, 6'h0, 1'b0}; |
assign WISHBONE_Data = {send_crc, WBReadLatch, 31'h0, WBInProgress, WBErrorLatch, 1'b0}; |
assign chain_sel_data = {send_crc, 4'h0, 1'b0}; |
|
|
`ifdef TRACE_ENABLED |
assign Trace_Data = {CalculatedCrcOut, TraceChain}; |
`endif |
|
//TDO is changing on the falling edge of tck |
always @ (negedge tck or posedge trst) |
begin |
if(trst) |
begin |
TDOData <= #Tp 0; |
`ifdef TRACE_ENABLED |
ReadBuffer_Tck<=#Tp 0; |
`endif |
end |
else |
if(UpdateDR) |
begin |
TDOData <= #Tp CrcMatch; |
`ifdef TRACE_ENABLED |
if(DEBUGSelected & TraceTestScanChain & TraceChain[0]) // Sample in the trace buffer is valid |
ReadBuffer_Tck<=#Tp 1; // Increment read pointer |
`endif |
end |
else |
begin |
if(ShiftDR) |
begin |
if(IDCODESelected) |
TDOData <= #Tp JTAG_DR_IN[0]; // IDCODE is shifted out 32-bits, then tdi is bypassed |
else |
if(CHAIN_SELECTSelected) |
TDOData <= #Tp chain_sel_data[BitCounter]; // Received crc is sent back |
else |
if(DEBUGSelected) |
begin |
if(CpuDebugScanChain0 | CpuDebugScanChain1 | CpuDebugScanChain2 | CpuDebugScanChain3) |
TDOData <= #Tp CPU_Data[BitCounter]; // Data read from CPU in the previous cycle is shifted out |
else |
if(RegisterScanChain) |
TDOData <= #Tp Register_Data[BitCounter]; // Data read from register in the previous cycle is shifted out |
else |
if(WishboneScanChain) |
TDOData <= #Tp WISHBONE_Data[BitCounter]; // Data read from the WISHBONE slave |
`ifdef TRACE_ENABLED |
else |
if(TraceTestScanChain) |
TDOData <= #Tp Trace_Data[BitCounter]; // Data from the trace buffer is shifted out |
`endif |
end |
end |
else |
begin |
TDOData <= #Tp 0; |
`ifdef TRACE_ENABLED |
ReadBuffer_Tck<=#Tp 0; |
`endif |
end |
end |
end |
|
|
//synopsys translate_off |
always @ (posedge tck) |
begin |
if(ShiftDR & CHAIN_SELECTSelected & BitCounter > 12) |
begin |
$display("\n%m Error: BitCounter is bigger then chain_sel_data bits width[12:0]. BitCounter=%d\n",BitCounter); |
$stop; |
end |
else |
if(ShiftDR & DEBUGSelected) |
begin |
if((CpuDebugScanChain0 | CpuDebugScanChain1 | CpuDebugScanChain2 | CpuDebugScanChain3) & BitCounter > 73) |
begin |
$display("\n%m Error: BitCounter is bigger then CPU_Data bits width[73:0]. BitCounter=%d\n",BitCounter); |
$stop; |
end |
else |
if(RegisterScanChain & BitCounter > 46) |
begin |
$display("\n%m Error: BitCounter is bigger then Register_Data bits width[46:0]. BitCounter=%d\n",BitCounter); |
$stop; |
end |
else |
if(WishboneScanChain & BitCounter > 73) |
begin |
$display("\n%m Error: BitCounter is bigger then WISHBONE_Data bits width[73:0]. BitCounter=%d\n",BitCounter); |
$stop; |
end |
`ifdef TRACE_ENABLED |
else |
if(TraceTestScanChain & BitCounter > 47) |
begin |
$display("\n%m Error: BitCounter is bigger then Trace_Data bits width[47:0]. BitCounter=%d\n",BitCounter); |
$stop; |
end |
`endif |
end |
end |
// synopsys translate_on |
|
|
|
|
|
|
|
|
/********************************************************************************** |
* * |
* End: JTAG_DR * |
* * |
**********************************************************************************/ |
|
|
|
/********************************************************************************** |
* * |
* CHAIN_SELECT logic * |
* * |
**********************************************************************************/ |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
Chain[`CHAIN_ID_LENGTH-1:0]<=#Tp `GLOBAL_BS_CHAIN; // Global BS chain is selected after reset |
else |
if(UpdateDR & CHAIN_SELECTSelected & CrcMatch) |
Chain[`CHAIN_ID_LENGTH-1:0]<=#Tp JTAG_DR_IN[3:0]; // New chain is selected |
end |
|
|
|
/********************************************************************************** |
* * |
* Register read/write logic * |
* CPU registers read/write logic * |
* * |
**********************************************************************************/ |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
begin |
ADDR[31:0] <=#Tp 32'h0; |
DataOut[31:0] <=#Tp 32'h0; |
RW <=#Tp 1'b0; |
RegAccessTck <=#Tp 1'b0; |
CPUAccessTck0 <=#Tp 1'b0; |
CPUAccessTck1 <=#Tp 1'b0; |
CPUAccessTck2 <=#Tp 1'b0; |
CPUAccessTck3 <=#Tp 1'b0; |
wb_AccessTck <=#Tp 1'h0; |
end |
else |
if(UpdateDR & DEBUGSelected & CrcMatch) |
begin |
if(RegisterScanChain) |
begin |
ADDR[4:0] <=#Tp JTAG_DR_IN[4:0]; // Latching address for register access |
RW <=#Tp JTAG_DR_IN[5]; // latch R/W bit |
DataOut[31:0] <=#Tp JTAG_DR_IN[37:6]; // latch data for write |
RegAccessTck <=#Tp 1'b1; |
end |
else |
if(WishboneScanChain & (!WBInProgress_tck)) |
begin |
ADDR <=#Tp JTAG_DR_IN[31:0]; // Latching address for WISHBONE slave access |
RW <=#Tp JTAG_DR_IN[32]; // latch R/W bit |
DataOut <=#Tp JTAG_DR_IN[64:33]; // latch data for write |
wb_AccessTck <=#Tp 1'b1; // |
end |
else |
if(CpuDebugScanChain0) |
begin |
ADDR[31:0] <=#Tp JTAG_DR_IN[31:0]; // Latching address for CPU register access |
RW <=#Tp JTAG_DR_IN[32]; // latch R/W bit |
DataOut[31:0] <=#Tp JTAG_DR_IN[64:33]; // latch data for write |
CPUAccessTck0 <=#Tp 1'b1; |
end |
else |
if(CpuDebugScanChain1) |
begin |
ADDR[31:0] <=#Tp JTAG_DR_IN[31:0]; // Latching address for CPU register access |
RW <=#Tp JTAG_DR_IN[32]; // latch R/W bit |
DataOut[31:0] <=#Tp JTAG_DR_IN[64:33]; // latch data for write |
CPUAccessTck1 <=#Tp 1'b1; |
end |
else |
if(CpuDebugScanChain2) |
begin |
ADDR[31:0] <=#Tp JTAG_DR_IN[31:0]; // Latching address for CPU register access |
RW <=#Tp JTAG_DR_IN[32]; // latch R/W bit |
DataOut[31:0] <=#Tp JTAG_DR_IN[64:33]; // latch data for write |
CPUAccessTck2 <=#Tp 1'b1; |
end |
else |
if(CpuDebugScanChain3) |
begin |
ADDR[31:0] <=#Tp JTAG_DR_IN[31:0]; // Latching address for CPU register access |
RW <=#Tp JTAG_DR_IN[32]; // latch R/W bit |
DataOut[31:0] <=#Tp JTAG_DR_IN[64:33]; // latch data for write |
CPUAccessTck3 <=#Tp 1'b1; |
end |
end |
else |
begin |
RegAccessTck <=#Tp 1'b0; // This signals are valid for one tck clock period only |
wb_AccessTck <=#Tp 1'b0; |
CPUAccessTck0 <=#Tp 1'b0; |
CPUAccessTck1 <=#Tp 1'b0; |
CPUAccessTck2 <=#Tp 1'b0; |
CPUAccessTck3 <=#Tp 1'b0; |
end |
end |
|
|
assign wb_adr_o = {ADDR[31:2] & {30{wb_cyc_o}}, 2'b0}; |
assign wb_we_o = RW & wb_cyc_o; |
assign wb_cab_o = 1'b0; |
|
reg [31:0] wb_dat_o; |
always @(wb_sel_o or wb_cyc_o or DataOut) |
begin |
if(wb_cyc_o) |
case (wb_sel_o) |
4'b0001: wb_dat_o = {24'hx, DataOut[7:0]}; |
4'b0010: wb_dat_o = {16'hx, DataOut[7:0], 8'hx}; |
4'b0100: wb_dat_o = {8'hx, DataOut[7:0], 16'hx}; |
4'b1000: wb_dat_o = {DataOut[7:0], 24'hx}; |
4'b0011: wb_dat_o = {16'hx, DataOut[15:0]}; |
4'b1100: wb_dat_o = {DataOut[15:0], 16'hx}; |
default: wb_dat_o = DataOut; |
endcase |
else |
wb_dat_o = 32'hx; |
end |
|
reg [3:0] wb_sel_o; |
always @(ADDR[1:0] or wb_cntl_o or wb_cyc_o) |
begin |
if(wb_cyc_o) |
case (wb_cntl_o) |
2'b00: wb_sel_o = 4'hf; |
2'b01: wb_sel_o = ADDR[1] ? 4'h3 : 4'hc; |
2'b10: wb_sel_o = ADDR[1] ? (ADDR[0] ? 4'h1 : 4'h2) : (ADDR[0] ? 4'h4 : 4'h8); |
default: wb_sel_o = 4'hx; |
endcase |
else |
wb_sel_o = 4'hx; |
end |
|
// Synchronizing the RegAccess signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn1 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(RegAccessTck), .sync_out(RegAccess) |
); |
|
// Synchronizing the wb_Access signal to wishbone clock |
dbg_sync_clk1_clk2 syn2 (.clk1(wb_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(wb_AccessTck), .sync_out(wb_Access_wbClk) |
); |
|
// Synchronizing the CPUAccess0 signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn3 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(CPUAccessTck0), .sync_out(CPUAccess0) |
); |
|
// Synchronizing the CPUAccess1 signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn4 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(CPUAccessTck1), .sync_out(CPUAccess1) |
); |
|
// Synchronizing the CPUAccess2 signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn5 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(CPUAccessTck2), .sync_out(CPUAccess2) |
); |
|
// Synchronizing the CPUAccess3 signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn6 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(CPUAccessTck3), .sync_out(CPUAccess3) |
); |
|
|
|
|
|
// Delayed signals used for accessing registers and CPU |
always @ (posedge cpu_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
begin |
RegAccess_q <=#Tp 1'b0; |
RegAccess_q2 <=#Tp 1'b0; |
CPUAccess_q <=#Tp 1'b0; |
CPUAccess_q2 <=#Tp 1'b0; |
CPUAccess_q3 <=#Tp 1'b0; |
end |
else |
begin |
RegAccess_q <=#Tp RegAccess; |
RegAccess_q2 <=#Tp RegAccess_q; |
CPUAccess_q <=#Tp CPUAccess0 | CPUAccess1 | CPUAccess2 | CPUAccess3; |
CPUAccess_q2 <=#Tp CPUAccess_q; |
CPUAccess_q3 <=#Tp CPUAccess_q2; |
end |
end |
|
// Chip select and read/write signals for accessing CPU |
assign CpuStall_write_access_0 = CPUAccess0 & ~CPUAccess_q2 & RW; |
assign CpuStall_read_access_0 = CPUAccess0 & ~CPUAccess_q2 & ~RW; |
assign CpuStall_write_access_1 = CPUAccess1 & ~CPUAccess_q2 & RW; |
assign CpuStall_read_access_1 = CPUAccess1 & ~CPUAccess_q2 & ~RW; |
assign CpuStall_write_access_2 = CPUAccess2 & ~CPUAccess_q2 & RW; |
assign CpuStall_read_access_2 = CPUAccess2 & ~CPUAccess_q2 & ~RW; |
assign CpuStall_write_access_3 = CPUAccess3 & ~CPUAccess_q2 & RW; |
assign CpuStall_read_access_3 = CPUAccess3 & ~CPUAccess_q2 & ~RW; |
assign CpuStall_access = (CPUAccess0 | CPUAccess1 | CPUAccess2 | CPUAccess3) & ~CPUAccess_q3; |
|
|
reg wb_Access_wbClk_q; |
// Delayed signals used for accessing WISHBONE |
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
wb_Access_wbClk_q <=#Tp 1'b0; |
else |
wb_Access_wbClk_q <=#Tp wb_Access_wbClk; |
end |
|
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
wb_cyc_o <=#Tp 1'b0; |
else |
if(wb_Access_wbClk & ~wb_Access_wbClk_q) |
wb_cyc_o <=#Tp 1'b1; |
else |
if(wb_ack_i | wb_err_i | WBAccessCounterExceed) |
wb_cyc_o <=#Tp 1'b0; |
end |
|
assign wb_stb_o = wb_cyc_o; |
|
|
// Latching data read from registers |
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
WBReadLatch[31:0]<=#Tp 32'h0; |
else |
if(wb_ack_i) |
case (wb_sel_o) |
4'b0001: WBReadLatch[31:0]<=#Tp {24'h0, wb_dat_i[7:0]}; |
4'b0010: WBReadLatch[31:0]<=#Tp {24'h0, wb_dat_i[15:8]}; |
4'b0100: WBReadLatch[31:0]<=#Tp {24'h0, wb_dat_i[23:16]}; |
4'b1000: WBReadLatch[31:0]<=#Tp {24'h0, wb_dat_i[31:24]}; |
4'b0011: WBReadLatch[31:0]<=#Tp {16'h0, wb_dat_i[15:0]}; |
4'b1100: WBReadLatch[31:0]<=#Tp {16'h0, wb_dat_i[31:16]}; |
default: WBReadLatch[31:0]<=#Tp wb_dat_i[31:0]; |
endcase |
end |
|
// Latching WISHBONE error cycle |
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
WBErrorLatch<=#Tp 1'b0; |
else |
if(wb_err_i) |
WBErrorLatch<=#Tp 1'b1; // Latching wb_err_i while performing WISHBONE access |
else |
if(wb_ack_i) |
WBErrorLatch<=#Tp 1'b0; // Clearing status |
end |
|
|
// WBInProgress is set at the beginning of the access and cleared when wb_ack_i or wb_err_i is set |
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
WBInProgress<=#Tp 1'b0; |
else |
if(wb_Access_wbClk & ~wb_Access_wbClk_q) |
WBInProgress<=#Tp 1'b1; |
else |
if(wb_ack_i | wb_err_i | WBAccessCounterExceed) |
WBInProgress<=#Tp 1'b0; |
end |
|
|
// Synchronizing WBInProgress |
always @ (posedge wb_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
WBAccessCounter<=#Tp 8'h0; |
else |
if(wb_ack_i | wb_err_i | WBAccessCounterExceed) |
WBAccessCounter<=#Tp 8'h0; |
else |
if(wb_cyc_o) |
WBAccessCounter<=#Tp WBAccessCounter + 1'b1; |
end |
|
assign WBAccessCounterExceed = WBAccessCounter==8'hff; |
|
|
// Synchronizing WBInProgress |
always @ (posedge tck) |
begin |
WBInProgress_sync1<=#Tp WBInProgress; |
WBInProgress_tck<=#Tp WBInProgress_sync1; |
end |
|
|
// Whan enabled, TRACE stalls CPU while saving data to the trace buffer. |
`ifdef TRACE_ENABLED |
assign cpu_stall_o = CpuStall_access | CpuStall_reg | CpuStall_trace ; |
`else |
assign cpu_stall_o = CpuStall_access | CpuStall_reg; |
`endif |
|
assign reset_o = CpuReset_reg; |
|
|
`ifdef TRACE_ENABLED |
always @ (CpuStall_write_access_0 or CpuStall_write_access_1 or |
CpuStall_write_access_2 or CpuStall_write_access_2 or |
CpuStall_read_access_0 or CpuStall_read_access_1 or |
CpuStall_read_access_2 or CpuStall_read_access_3 or opselect_trace) |
`else |
always @ (CpuStall_write_access_0 or CpuStall_write_access_1 or |
CpuStall_write_access_2 or CpuStall_write_access_3 or |
CpuStall_read_access_0 or CpuStall_read_access_1 or |
CpuStall_read_access_2 or CpuStall_read_access_3) |
`endif |
begin |
if(CpuStall_write_access_0) |
opselect_o = `DEBUG_WRITE_0; |
else |
if(CpuStall_read_access_0) |
opselect_o = `DEBUG_READ_0; |
else |
if(CpuStall_write_access_1) |
opselect_o = `DEBUG_WRITE_1; |
else |
if(CpuStall_read_access_1) |
opselect_o = `DEBUG_READ_1; |
else |
if(CpuStall_write_access_2) |
opselect_o = `DEBUG_WRITE_2; |
else |
if(CpuStall_read_access_2) |
opselect_o = `DEBUG_READ_2; |
else |
if(CpuStall_write_access_3) |
opselect_o = `DEBUG_WRITE_3; |
else |
if(CpuStall_read_access_3) |
opselect_o = `DEBUG_READ_3; |
else |
`ifdef TRACE_ENABLED |
opselect_o = opselect_trace; |
`else |
opselect_o = 3'h0; |
`endif |
end |
|
|
// Latching data read from CPU or registers |
always @ (posedge cpu_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
DataReadLatch[31:0]<=#Tp 0; |
else |
if(CPUAccess_q & ~CPUAccess_q2) |
DataReadLatch[31:0]<=#Tp cpu_data_i[31:0]; |
else |
if(RegAccess_q & ~RegAccess_q2) |
DataReadLatch[31:0]<=#Tp RegDataIn[31:0]; |
end |
|
assign cpu_addr_o = ADDR; |
assign cpu_data_o = DataOut; |
|
|
|
/********************************************************************************** |
* * |
* Read Trace buffer logic * |
* * |
**********************************************************************************/ |
`ifdef TRACE_ENABLED |
|
|
// Synchronizing the trace read buffer signal to cpu_clk_i clock |
dbg_sync_clk1_clk2 syn4 (.clk1(cpu_clk_i), .clk2(tck), .reset1(wb_rst_i), .reset2(trst), |
.set2(ReadBuffer_Tck), .sync_out(ReadTraceBuffer) |
); |
|
|
|
always @(posedge cpu_clk_i or posedge wb_rst_i) |
begin |
if(wb_rst_i) |
ReadTraceBuffer_q <=#Tp 0; |
else |
ReadTraceBuffer_q <=#Tp ReadTraceBuffer; |
end |
|
assign ReadTraceBufferPulse = ReadTraceBuffer & ~ReadTraceBuffer_q; |
|
`endif |
|
/********************************************************************************** |
* * |
* End: Read Trace buffer logic * |
* * |
**********************************************************************************/ |
|
|
|
|
|
/********************************************************************************** |
* * |
* Bit counter * |
* * |
**********************************************************************************/ |
|
|
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
BitCounter[7:0]<=#Tp 0; |
else |
if(ShiftDR) |
BitCounter[7:0]<=#Tp BitCounter[7:0]+1; |
else |
if(UpdateDR) |
BitCounter[7:0]<=#Tp 0; |
end |
|
|
|
/********************************************************************************** |
* * |
* End: Bit counter * |
* * |
**********************************************************************************/ |
|
|
|
/********************************************************************************** |
* * |
* Connecting Registers * |
* * |
**********************************************************************************/ |
dbg_registers dbgregs(.data_in(DataOut[31:0]), .data_out(RegDataIn[31:0]), |
.address(ADDR[4:0]), .rw(RW), .access(RegAccess & ~RegAccess_q), .clk(cpu_clk_i), |
.bp(bp_i), .reset(wb_rst_i), |
`ifdef TRACE_ENABLED |
.ContinMode(ContinMode), .TraceEnable(TraceEnable), |
.WpTrigger(WpTrigger), .BpTrigger(BpTrigger), .LSSTrigger(LSSTrigger), |
.ITrigger(ITrigger), .TriggerOper(TriggerOper), .WpQualif(WpQualif), |
.BpQualif(BpQualif), .LSSQualif(LSSQualif), .IQualif(IQualif), |
.QualifOper(QualifOper), .RecordPC(RecordPC), |
.RecordLSEA(RecordLSEA), .RecordLDATA(RecordLDATA), |
.RecordSDATA(RecordSDATA), .RecordReadSPR(RecordReadSPR), |
.RecordWriteSPR(RecordWriteSPR), .RecordINSTR(RecordINSTR), |
.WpTriggerValid(WpTriggerValid), |
.BpTriggerValid(BpTriggerValid), .LSSTriggerValid(LSSTriggerValid), |
.ITriggerValid(ITriggerValid), .WpQualifValid(WpQualifValid), |
.BpQualifValid(BpQualifValid), .LSSQualifValid(LSSQualifValid), |
.IQualifValid(IQualifValid), |
.WpStop(WpStop), .BpStop(BpStop), .LSSStop(LSSStop), .IStop(IStop), |
.StopOper(StopOper), .WpStopValid(WpStopValid), .BpStopValid(BpStopValid), |
.LSSStopValid(LSSStopValid), .IStopValid(IStopValid), |
`endif |
.cpu_stall(CpuStall_reg), .cpu_stall_all(cpu_stall_all_o), .cpu_sel(cpu_sel_o), |
.cpu_reset(CpuReset_reg), .mon_cntl_o(mon_cntl_o), .wb_cntl_o(wb_cntl_o) |
|
); |
|
/********************************************************************************** |
* * |
* End: Connecting Registers * |
* * |
**********************************************************************************/ |
|
|
/********************************************************************************** |
* * |
* Connecting CRC module * |
* * |
**********************************************************************************/ |
wire AsyncResetCrc = trst; |
wire SyncResetCrc = UpdateDR_q; |
|
assign BitCounter_Lt4 = BitCounter<4; |
assign BitCounter_Eq5 = BitCounter==5; |
assign BitCounter_Eq32 = BitCounter==32; |
assign BitCounter_Lt38 = BitCounter<38; |
assign BitCounter_Lt65 = BitCounter<65; |
|
`ifdef TRACE_ENABLED |
assign BitCounter_Lt40 = BitCounter<40; |
`endif |
|
|
// wire EnableCrcIn = ShiftDR & |
// ( (CHAIN_SELECTSelected & BitCounter_Lt4) | |
// ((DEBUGSelected & RegisterScanChain) & BitCounter_Lt38)| |
// ((DEBUGSelected & CpuDebugScanChain0) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain1) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain2) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain3) & BitCounter_Lt65)| |
// ((DEBUGSelected & WishboneScanChain) & BitCounter_Lt65) |
// ); |
|
wire EnableCrc = ShiftDR & |
( (CHAIN_SELECTSelected & BitCounter_Lt4) | |
((DEBUGSelected & RegisterScanChain) & BitCounter_Lt38)| |
((DEBUGSelected & CpuDebugScanChain0) & BitCounter_Lt65)| |
((DEBUGSelected & CpuDebugScanChain1) & BitCounter_Lt65)| |
((DEBUGSelected & CpuDebugScanChain2) & BitCounter_Lt65)| |
((DEBUGSelected & CpuDebugScanChain3) & BitCounter_Lt65)| |
((DEBUGSelected & WishboneScanChain) & BitCounter_Lt65) |
`ifdef TRACE_ENABLED |
| |
((DEBUGSelected & TraceTestScanChain) & BitCounter_Lt40) |
`endif |
); |
|
// wire EnableCrcOut= ShiftDR & |
// ( |
// ((DEBUGSelected & RegisterScanChain) & BitCounter_Lt38)| |
// ((DEBUGSelected & CpuDebugScanChain0) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain1) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain2) & BitCounter_Lt65)| |
// ((DEBUGSelected & CpuDebugScanChain3) & BitCounter_Lt65)| |
// ((DEBUGSelected & WishboneScanChain) & BitCounter_Lt65) |
// `ifdef TRACE_ENABLED |
// | |
// ((DEBUGSelected & TraceTestScanChain) & BitCounter_Lt40) |
// `endif |
// ); |
|
// Calculating crc for input data |
//dbg_crc8_d1 crc1 (.data(tdi), .enable_crc(EnableCrcIn), .reset(AsyncResetCrc), .sync_rst_crc(SyncResetCrc), |
dbg_crc8_d1 crc1 (.data(tdi), .enable_crc(EnableCrc), .reset(AsyncResetCrc), .sync_rst_crc(SyncResetCrc), |
.crc_out(CalculatedCrcIn), .clk(tck)); |
|
// Calculating crc for output data |
//dbg_crc8_d1 crc2 (.data(TDOData), .enable_crc(EnableCrcOut), .reset(AsyncResetCrc), .sync_rst_crc(SyncResetCrc), |
dbg_crc8_d1 crc2 (.data(TDOData), .enable_crc(EnableCrc), .reset(AsyncResetCrc), .sync_rst_crc(SyncResetCrc), |
.crc_out(CalculatedCrcOut), .clk(tck)); |
|
|
reg [3:0] crc_cnt; |
always @ (posedge tck or posedge trst) |
begin |
if (trst) |
crc_cnt <= 0; |
else if (Exit1DR) |
crc_cnt <=#Tp 0; |
// else if ((~EnableCrcIn) & ShiftDR) |
else if ((~EnableCrc) & ShiftDR) |
crc_cnt <=#Tp crc_cnt + 1'b1; |
end |
|
|
// Generating CrcMatch signal. |
always @ (posedge tck or posedge trst) |
begin |
if(trst) |
CrcMatch <=#Tp 1'b1; |
else if (SelectDRScan) |
CrcMatch <=#Tp 1'b1; |
// else if ((~EnableCrcIn) & ShiftDR) |
else if ((~EnableCrc) & ShiftDR) |
begin |
if (tdi != CalculatedCrcIn[crc_cnt]) |
CrcMatch <=#Tp 1'b0; |
end |
end |
|
|
// Generating CrcMatch_q signal. |
always @ (posedge tck or posedge trst) |
begin |
CrcMatch_q <=#Tp CrcMatch; |
end |
|
|
// Active chain |
assign RegisterScanChain = Chain == `REGISTER_SCAN_CHAIN; |
assign CpuDebugScanChain0 = Chain == `CPU_DEBUG_CHAIN_0; |
assign CpuDebugScanChain1 = Chain == `CPU_DEBUG_CHAIN_1; |
assign CpuDebugScanChain2 = Chain == `CPU_DEBUG_CHAIN_2; |
assign CpuDebugScanChain3 = Chain == `CPU_DEBUG_CHAIN_3; |
assign WishboneScanChain = Chain == `WISHBONE_SCAN_CHAIN; |
|
`ifdef TRACE_ENABLED |
assign TraceTestScanChain = Chain == `TRACE_TEST_CHAIN; |
`endif |
|
/********************************************************************************** |
* * |
* End: Connecting CRC module * |
* * |
**********************************************************************************/ |
|
/********************************************************************************** |
* * |
* Connecting trace module * |
* * |
**********************************************************************************/ |
`ifdef TRACE_ENABLED |
dbg_trace dbgTrace1(.Wp(wp_i), .Bp(bp_i), .DataIn(cpu_data_i), .OpSelect(opselect_trace), |
.LsStatus(lsstatus_i), .IStatus(istatus_i), .CpuStall_O(CpuStall_trace), |
.Mclk(cpu_clk_i), .Reset(wb_rst_i), .TraceChain(TraceChain), |
.ContinMode(ContinMode), .TraceEnable_reg(TraceEnable), |
.WpTrigger(WpTrigger), |
.BpTrigger(BpTrigger), .LSSTrigger(LSSTrigger), .ITrigger(ITrigger), |
.TriggerOper(TriggerOper), .WpQualif(WpQualif), .BpQualif(BpQualif), |
.LSSQualif(LSSQualif), .IQualif(IQualif), .QualifOper(QualifOper), |
.RecordPC(RecordPC), .RecordLSEA(RecordLSEA), |
.RecordLDATA(RecordLDATA), .RecordSDATA(RecordSDATA), |
.RecordReadSPR(RecordReadSPR), .RecordWriteSPR(RecordWriteSPR), |
.RecordINSTR(RecordINSTR), |
.WpTriggerValid(WpTriggerValid), .BpTriggerValid(BpTriggerValid), |
.LSSTriggerValid(LSSTriggerValid), .ITriggerValid(ITriggerValid), |
.WpQualifValid(WpQualifValid), .BpQualifValid(BpQualifValid), |
.LSSQualifValid(LSSQualifValid), .IQualifValid(IQualifValid), |
.ReadBuffer(ReadTraceBufferPulse), |
.WpStop(WpStop), .BpStop(BpStop), .LSSStop(LSSStop), .IStop(IStop), |
.StopOper(StopOper), .WpStopValid(WpStopValid), .BpStopValid(BpStopValid), |
.LSSStopValid(LSSStopValid), .IStopValid(IStopValid) |
); |
`endif |
/********************************************************************************** |
* * |
* End: Connecting trace module * |
* * |
**********************************************************************************/ |
|
|
|
endmodule |
/tags/old_debug/rtl/verilog/dbg_registers.v
0,0 → 1,347
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_registers.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.12 2003/09/17 14:38:57 simons |
// WB_CNTL register added, some syncronization fixes. |
// |
// Revision 1.11 2003/07/31 14:01:53 simons |
// Lapsus fixed. |
// |
// Revision 1.9 2003/07/31 12:19:49 simons |
// Multiple cpu support added. |
// |
// Revision 1.8 2002/10/10 02:42:55 mohor |
// WISHBONE Scan Chain is changed to reflect state of the WISHBONE access (WBInProgress bit added). Internal counter is used (counts 256 wb_clk cycles) and when counter exceeds that value, wb_cyc_o is negated. |
// |
// Revision 1.7 2002/05/07 14:43:59 mohor |
// mon_cntl_o signals that controls monitor mux added. |
// |
// Revision 1.6 2002/04/22 12:54:11 mohor |
// Signal names changed to lower case. |
// |
// Revision 1.5 2001/11/26 10:47:09 mohor |
// Crc generation is different for read or write commands. Small synthesys fixes. |
// |
// Revision 1.4 2001/10/19 11:40:02 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.3 2001/10/15 09:55:47 mohor |
// Wishbone interface added, few fixes for better performance, |
// hooks for boundary scan testing added. |
// |
// Revision 1.2 2001/09/18 14:13:47 mohor |
// Trace fixed. Some registers changed, trace simplified. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.3 2001/06/01 22:22:35 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.2 2001/05/18 13:10:00 mohor |
// Headers changed. All additional information is now avaliable in the README.txt file. |
// |
// Revision 1.1.1.1 2001/05/18 06:35:10 mohor |
// Initial release |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
module dbg_registers(data_in, data_out, address, rw, access, clk, bp, reset, |
`ifdef TRACE_ENABLED |
ContinMode, |
TraceEnable, WpTrigger, BpTrigger, LSSTrigger, |
ITrigger, TriggerOper, WpQualif, BpQualif, LSSQualif, IQualif, |
QualifOper, RecordPC, RecordLSEA, RecordLDATA, |
RecordSDATA, RecordReadSPR, RecordWriteSPR, RecordINSTR, |
WpTriggerValid, BpTriggerValid, LSSTriggerValid, ITriggerValid, |
WpQualifValid, BpQualifValid, LSSQualifValid, IQualifValid, |
WpStop, BpStop, LSSStop, IStop, StopOper, WpStopValid, BpStopValid, |
LSSStopValid, IStopValid, |
`endif |
cpu_stall, cpu_stall_all, cpu_sel, cpu_reset, mon_cntl_o, wb_cntl_o |
); |
|
parameter Tp = 1; |
|
input [31:0] data_in; |
input [4:0] address; |
|
input rw; |
input access; |
input clk; |
input bp; |
input reset; |
|
output [31:0] data_out; |
reg [31:0] data_out; |
|
`ifdef TRACE_ENABLED |
output ContinMode; |
output TraceEnable; |
|
output [10:0] WpTrigger; |
output BpTrigger; |
output [3:0] LSSTrigger; |
output [1:0] ITrigger; |
output [1:0] TriggerOper; |
|
output WpTriggerValid; |
output BpTriggerValid; |
output LSSTriggerValid; |
output ITriggerValid; |
|
output [10:0] WpQualif; |
output BpQualif; |
output [3:0] LSSQualif; |
output [1:0] IQualif; |
output [1:0] QualifOper; |
|
output WpQualifValid; |
output BpQualifValid; |
output LSSQualifValid; |
output IQualifValid; |
|
output [10:0] WpStop; |
output BpStop; |
output [3:0] LSSStop; |
output [1:0] IStop; |
output [1:0] StopOper; |
|
output WpStopValid; |
output BpStopValid; |
output LSSStopValid; |
output IStopValid; |
|
output RecordPC; |
output RecordLSEA; |
output RecordLDATA; |
output RecordSDATA; |
output RecordReadSPR; |
output RecordWriteSPR; |
output RecordINSTR; |
`endif |
|
output cpu_stall; |
output cpu_stall_all; |
output [`CPU_NUM-1:0] cpu_sel; |
output cpu_reset; |
output [3:0] mon_cntl_o; |
output [1:0] wb_cntl_o; |
|
wire MODER_Acc = (address == `MODER_ADR) & access; |
wire CPUOP_Acc = (address == `CPUOP_ADR) & access; |
wire CPUSEL_Acc = (address == `CPUSEL_ADR) & access; |
wire MON_CNTL_Acc = (address == `MON_CNTL_ADR) & access; |
wire WB_CNTL_Acc = (address == `WB_CNTL_ADR) & access; |
`ifdef TRACE_ENABLED |
wire TSEL_Acc = (address == `TSEL_ADR) & access; |
wire QSEL_Acc = (address == `QSEL_ADR) & access; |
wire SSEL_Acc = (address == `SSEL_ADR) & access; |
wire RECSEL_Acc = (address == `RECSEL_ADR) & access; |
`endif |
|
|
wire MODER_Wr = MODER_Acc & rw; |
wire CPUOP_Wr = CPUOP_Acc & rw; |
wire CPUSEL_Wr = CPUSEL_Acc & rw; |
wire MON_CNTL_Wr = MON_CNTL_Acc & rw; |
wire WB_CNTL_Wr = WB_CNTL_Acc & rw; |
`ifdef TRACE_ENABLED |
wire TSEL_Wr = TSEL_Acc & rw; |
wire QSEL_Wr = QSEL_Acc & rw; |
wire SSEL_Wr = SSEL_Acc & rw; |
wire RECSEL_Wr = RECSEL_Acc & rw; |
`endif |
|
|
|
wire MODER_Rd = MODER_Acc & ~rw; |
wire CPUOP_Rd = CPUOP_Acc & ~rw; |
wire CPUSEL_Rd = CPUSEL_Acc & ~rw; |
wire MON_CNTL_Rd = MON_CNTL_Acc & ~rw; |
wire WB_CNTL_Rd = WB_CNTL_Acc & ~rw; |
`ifdef TRACE_ENABLED |
wire TSEL_Rd = TSEL_Acc & ~rw; |
wire QSEL_Rd = QSEL_Acc & ~rw; |
wire SSEL_Rd = SSEL_Acc & ~rw; |
wire RECSEL_Rd = RECSEL_Acc & ~rw; |
`endif |
|
|
wire [31:0] MODEROut; |
wire [2:1] CPUOPOut; |
wire [`CPU_NUM-1:0] CPUSELOut; |
wire [3:0] MONCNTLOut; |
wire [1:0] WB_CNTLOut; |
|
`ifdef TRACE_ENABLED |
wire [31:0] TSELOut; |
wire [31:0] QSELOut; |
wire [31:0] SSELOut; |
wire [6:0] RECSELOut; |
`endif |
|
|
`ifdef TRACE_ENABLED |
assign MODEROut[15:0] = 16'h0001; |
assign MODEROut[31:18] = 14'h0; |
`else |
assign MODEROut[31:0] = 32'h0000; |
`endif |
|
|
reg CpuStallBp; |
always @(posedge clk or posedge reset) |
begin |
if(reset) |
CpuStallBp <= 1'b0; |
else |
if(bp) // Breakpoint sets bit |
CpuStallBp <= 1'b1; |
else |
if(CPUOP_Wr) // Register access can set or clear bit |
CpuStallBp <= data_in[0]; |
end |
|
dbg_register #(2, 0) CPUOP (.data_in(data_in[2:1]), .data_out(CPUOPOut[2:1]), .write(CPUOP_Wr), .clk(clk), .reset(reset)); |
dbg_register #(`CPU_NUM, 1) CPUSEL (.data_in(data_in[`CPU_NUM-1:0]), .data_out(CPUSELOut), .write(CPUSEL_Wr), .clk(clk), .reset(reset)); |
dbg_register #(4, `MON_CNTL_DEF) MONCNTL (.data_in(data_in[3:0]), .data_out(MONCNTLOut[3:0]), .write(MON_CNTL_Wr), .clk(clk), .reset(reset)); |
dbg_register #(2, 0) WBCNTL (.data_in(data_in[1:0]), .data_out(WB_CNTLOut[1:0]), .write(WB_CNTL_Wr), .clk(clk), .reset(reset)); |
|
|
`ifdef TRACE_ENABLED |
dbg_register #(2, `MODER_DEF) MODER (.data_in(data_in[17:16]), .data_out(MODEROut[17:16]), .write(MODER_Wr), .clk(clk), .reset(reset)); |
dbg_register #(32, `TSEL_DEF) TSEL (.data_in(data_in), .data_out(TSELOut), .write(TSEL_Wr), .clk(clk), .reset(reset)); |
dbg_register #(32, `QSEL_DEF) QSEL (.data_in(data_in), .data_out(QSELOut), .write(QSEL_Wr), .clk(clk), .reset(reset)); |
dbg_register #(32, `SSEL_DEF) SSEL (.data_in(data_in), .data_out(SSELOut), .write(SSEL_Wr), .clk(clk), .reset(reset)); |
dbg_register #(7, `RECSEL_DEF) RECSEL (.data_in(data_in[6:0]), .data_out(RECSELOut), .write(RECSEL_Wr), .clk(clk), .reset(reset)); |
`endif |
|
|
|
always @ (posedge clk) |
begin |
if(MODER_Rd) data_out<= #Tp MODEROut; |
else |
if(CPUOP_Rd) data_out<= #Tp {29'h0, CPUOPOut[2:1], cpu_stall}; |
else |
if(CPUSEL_Rd) data_out<= #Tp {{(32-`CPU_NUM){1'b0}}, CPUSELOut}; |
else |
if(MON_CNTL_Rd) data_out<= #Tp {28'h0, MONCNTLOut}; |
else |
if(WB_CNTL_Rd) data_out<= #Tp {30'h0, WB_CNTLOut}; |
`ifdef TRACE_ENABLED |
else |
if(TSEL_Rd) data_out<= #Tp TSELOut; |
else |
if(QSEL_Rd) data_out<= #Tp QSELOut; |
else |
if(SSEL_Rd) data_out<= #Tp SSELOut; |
else |
if(RECSEL_Rd) data_out<= #Tp {25'h0, RECSELOut}; |
`endif |
else data_out<= #Tp 'h0; |
end |
|
`ifdef TRACE_ENABLED |
assign TraceEnable = MODEROut[16]; |
assign ContinMode = MODEROut[17]; |
|
assign WpTrigger[10:0] = TSELOut[10:0]; |
assign WpTriggerValid = TSELOut[11]; |
assign BpTrigger = TSELOut[12]; |
assign BpTriggerValid = TSELOut[13]; |
assign LSSTrigger[3:0] = TSELOut[19:16]; |
assign LSSTriggerValid = TSELOut[20]; |
assign ITrigger[1:0] = TSELOut[22:21]; |
assign ITriggerValid = TSELOut[23]; |
assign TriggerOper[1:0] = TSELOut[31:30]; |
|
assign WpQualif[10:0] = QSELOut[10:0]; |
assign WpQualifValid = QSELOut[11]; |
assign BpQualif = QSELOut[12]; |
assign BpQualifValid = QSELOut[13]; |
assign LSSQualif[3:0] = QSELOut[19:16]; |
assign LSSQualifValid = QSELOut[20]; |
assign IQualif[1:0] = QSELOut[22:21]; |
assign IQualifValid = QSELOut[23]; |
assign QualifOper[1:0] = QSELOut[31:30]; |
|
assign WpStop[10:0] = SSELOut[10:0]; |
assign WpStopValid = SSELOut[11]; |
assign BpStop = SSELOut[12]; |
assign BpStopValid = SSELOut[13]; |
assign LSSStop[3:0] = SSELOut[19:16]; |
assign LSSStopValid = SSELOut[20]; |
assign IStop[1:0] = SSELOut[22:21]; |
assign IStopValid = SSELOut[23]; |
assign StopOper[1:0] = SSELOut[31:30]; |
|
|
assign RecordPC = RECSELOut[0]; |
assign RecordLSEA = RECSELOut[1]; |
assign RecordLDATA = RECSELOut[2]; |
assign RecordSDATA = RECSELOut[3]; |
assign RecordReadSPR = RECSELOut[4]; |
assign RecordWriteSPR = RECSELOut[5]; |
assign RecordINSTR = RECSELOut[6]; |
`endif |
|
assign cpu_stall = bp | CpuStallBp; // bp asynchronously sets the cpu_stall, then CpuStallBp (from register) holds it active |
assign cpu_stall_all = CPUOPOut[2]; // this signal is used to stall all the cpus except the one that is selected in cpusel register |
assign cpu_sel = CPUSELOut; |
assign cpu_reset = CPUOPOut[1]; |
assign mon_cntl_o = MONCNTLOut; |
assign wb_cntl_o = WB_CNTLOut; |
|
endmodule |
/tags/old_debug/rtl/verilog/dbg_defines.v
0,0 → 1,190
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_defines.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.13 2003/10/21 09:48:31 simons |
// Mbist support added. |
// |
// Revision 1.12 2003/09/17 14:38:57 simons |
// WB_CNTL register added, some syncronization fixes. |
// |
// Revision 1.11 2003/08/28 13:55:21 simons |
// Three more chains added for cpu debug access. |
// |
// Revision 1.10 2003/07/31 12:19:49 simons |
// Multiple cpu support added. |
// |
// Revision 1.9 2002/05/07 14:43:59 mohor |
// mon_cntl_o signals that controls monitor mux added. |
// |
// Revision 1.8 2002/01/25 07:58:34 mohor |
// IDCODE bug fixed, chains reused to decreas size of core. Data is shifted-in |
// not filled-in. Tested in hw. |
// |
// Revision 1.7 2001/12/06 10:08:06 mohor |
// Warnings from synthesys tools fixed. |
// |
// Revision 1.6 2001/11/28 09:38:30 mohor |
// Trace disabled by default. |
// |
// Revision 1.5 2001/10/15 09:55:47 mohor |
// Wishbone interface added, few fixes for better performance, |
// hooks for boundary scan testing added. |
// |
// Revision 1.4 2001/09/24 14:06:42 mohor |
// Changes connected to the OpenRISC access (SPR read, SPR write). |
// |
// Revision 1.3 2001/09/20 10:11:25 mohor |
// Working version. Few bugs fixed, comments added. |
// |
// Revision 1.2 2001/09/18 14:13:47 mohor |
// Trace fixed. Some registers changed, trace simplified. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.3 2001/06/01 22:22:35 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.2 2001/05/18 13:10:00 mohor |
// Headers changed. All additional information is now avaliable in the README.txt file. |
// |
// Revision 1.1.1.1 2001/05/18 06:35:08 mohor |
// Initial release |
// |
// |
|
|
|
// Enable TRACE |
//`define TRACE_ENABLED // Uncomment this define to activate the trace |
|
// Define number of cpus supported by the dbg interface |
`define CPU_NUM 2 |
|
// Define IDCODE Value |
`define IDCODE_VALUE 32'h14951185 |
|
// Define master clock (CPU clock) |
//`define CPU_CLOCK 50 // Half period = 50 ns => MCLK = 10 Mhz |
`define CPU_CLOCK 2.5 // Half period = 5 ns => MCLK = 200 Mhz |
|
// Length of the Instruction register |
`define IR_LENGTH 4 |
|
// Length of the Data register (must be equal to the longest scan chain for shifting the data in) |
`define DR_LENGTH 74 |
|
// Length of the CHAIN ID register |
`define CHAIN_ID_LENGTH 4 |
|
// Length of the CRC |
`define CRC_LENGTH 8 |
|
// Trace buffer size and counter and write/read pointer width. This can be expanded when more RAM is avaliable |
`define TRACECOUNTERWIDTH 5 |
`define TRACEBUFFERLENGTH 32 // 2^5 |
|
`define TRACESAMPLEWIDTH 36 |
|
// OpSelect width |
`define OPSELECTWIDTH 3 |
`define OPSELECTIONCOUNTER 8 //2^3 |
|
// OpSelect (dbg_op_i) signal meaning |
`define DEBUG_READ_0 0 |
`define DEBUG_WRITE_0 1 |
`define DEBUG_READ_1 2 |
`define DEBUG_WRITE_1 3 |
`define DEBUG_READ_2 4 |
`define DEBUG_WRITE_2 5 |
`define DEBUG_READ_3 6 |
`define DEBUG_WRITE_3 7 |
|
// Supported Instructions |
`define EXTEST 4'b0000 |
`define SAMPLE_PRELOAD 4'b0001 |
`define IDCODE 4'b0010 |
`define CHAIN_SELECT 4'b0011 |
`define INTEST 4'b0100 |
`define CLAMP 4'b0101 |
`define CLAMPZ 4'b0110 |
`define HIGHZ 4'b0111 |
`define DEBUG 4'b1000 |
`define MBIST 4'b1001 |
`define BYPASS 4'b1111 |
|
// Chains |
`define GLOBAL_BS_CHAIN 4'b0000 |
`define CPU_DEBUG_CHAIN_2 4'b0001 |
`define CPU_TEST_CHAIN 4'b0010 |
`define TRACE_TEST_CHAIN 4'b0011 |
`define REGISTER_SCAN_CHAIN 4'b0100 |
`define WISHBONE_SCAN_CHAIN 4'b0101 |
`define CPU_DEBUG_CHAIN_0 4'b0110 |
`define CPU_DEBUG_CHAIN_1 4'b0111 |
`define CPU_DEBUG_CHAIN_3 4'b1000 |
|
// Registers addresses |
`define MODER_ADR 5'h00 |
`define TSEL_ADR 5'h01 |
`define QSEL_ADR 5'h02 |
`define SSEL_ADR 5'h03 |
`define CPUOP_ADR 5'h04 |
`define CPUSEL_ADR 5'h05 |
`define RECSEL_ADR 5'h10 |
`define MON_CNTL_ADR 5'h11 |
`define WB_CNTL_ADR 5'h12 |
|
|
// Registers default values (after reset) |
`define MODER_DEF 2'h0 |
`define TSEL_DEF 32'h00000000 |
`define QSEL_DEF 32'h00000000 |
`define SSEL_DEF 32'h00000000 |
`define CPUOP_DEF 2'h0 |
`define RECSEL_DEF 7'h0 |
`define MON_CNTL_DEF 4'h0 |
/tags/old_debug/rtl/verilog/dbg_trace.v
0,0 → 1,473
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_trace.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.6 2001/11/26 10:47:09 mohor |
// Crc generation is different for read or write commands. Small synthesys fixes. |
// |
// Revision 1.5 2001/10/19 11:40:01 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.4 2001/09/20 10:11:25 mohor |
// Working version. Few bugs fixed, comments added. |
// |
// Revision 1.3 2001/09/19 11:55:13 mohor |
// Asynchronous set/reset not used in trace any more. |
// |
// Revision 1.2 2001/09/18 14:13:47 mohor |
// Trace fixed. Some registers changed, trace simplified. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.3 2001/06/01 22:22:35 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.2 2001/05/18 13:10:00 mohor |
// Headers changed. All additional information is now avaliable in the README.txt file. |
// |
// Revision 1.1.1.1 2001/05/18 06:35:06 mohor |
// Initial release |
// |
// |
|
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
// module Trace |
module dbg_trace (Wp, Bp, DataIn, OpSelect, LsStatus, IStatus, CpuStall_O, |
Mclk, Reset, TraceChain, ContinMode, TraceEnable_reg, |
WpTrigger, BpTrigger, LSSTrigger, ITrigger, TriggerOper, WpQualif, |
BpQualif, LSSQualif, IQualif, QualifOper, RecordPC, RecordLSEA, |
RecordLDATA, RecordSDATA, RecordReadSPR, RecordWriteSPR, |
RecordINSTR, |
WpTriggerValid, BpTriggerValid, LSSTriggerValid, ITriggerValid, |
WpQualifValid, BpQualifValid, LSSQualifValid, IQualifValid, ReadBuffer, |
WpStop, BpStop, LSSStop, IStop, StopOper, WpStopValid, BpStopValid, |
LSSStopValid, IStopValid |
); |
|
parameter Tp = 1; |
|
|
input [10:0] Wp; // Watchpoints |
input Bp; // Breakpoint |
input [31:0] DataIn; // Data from the RISC |
input [3:0] LsStatus; // Load/Store status |
input [1:0] IStatus; // Instruction status |
|
input Mclk; // Master clock (RISC clock) |
input Reset; // Reset |
input ReadBuffer; // Instruction for reading a sample from the Buffer |
|
// from registers |
input ContinMode; // Continous mode of the trace |
input TraceEnable_reg; // Trace is enabled (enabled by writing a bit in the register) |
|
input [10:0] WpTrigger; // Signals that come from registers to set the trigger |
input BpTrigger; // Signals that come from registers to set the trigger |
input [3:0] LSSTrigger; // Signals that come from registers to set the trigger |
input [1:0] ITrigger; // Signals that come from registers to set the trigger |
input [1:0] TriggerOper; // Signals that come from registers to set the trigger |
|
input [10:0] WpQualif; // Signals that come from registers to set the qualifier |
input BpQualif; // Signals that come from registers to set the qualifier |
input [3:0] LSSQualif; // Signals that come from registers to set the qualifier |
input [1:0] IQualif; // Signals that come from registers to set the qualifier |
input [1:0] QualifOper; // Signals that come from registers to set the qualifier |
|
input [10:0] WpStop; // Signals that come from registers to set the stop condition |
input BpStop; // Signals that come from registers to set the stop condition |
input [3:0] LSSStop; // Signals that come from registers to set the stop condition |
input [1:0] IStop; // Signals that come from registers to set the stop condition |
input [1:0] StopOper; // Signals that come from registers to set the stop condition |
|
input RecordPC; // Signals that come from registers for defining the sample for recording |
input RecordLSEA; // Signals that come from registers for defining the sample for recording |
input RecordLDATA; // Signals that come from registers for defining the sample for recording |
input RecordSDATA; // Signals that come from registers for defining the sample for recording |
input RecordReadSPR; // Signals that come from registers for defining the sample for recording |
input RecordWriteSPR; // Signals that come from registers for defining the sample for recording |
input RecordINSTR; // Signals that come from registers for defining the sample for recording |
|
input WpTriggerValid; // Signals that come from registers and indicate which trigger conditions are valid |
input BpTriggerValid; // Signals that come from registers and indicate which trigger conditions are valid |
input LSSTriggerValid; // Signals that come from registers and indicate which trigger conditions are valid |
input ITriggerValid; // Signals that come from registers and indicate which trigger conditions are valid |
|
input WpQualifValid; // Signals that come from registers and indicate which qualifier conditions are valid |
input BpQualifValid; // Signals that come from registers and indicate which qualifier conditions are valid |
input LSSQualifValid; // Signals that come from registers and indicate which qualifier conditions are valid |
input IQualifValid; // Signals that come from registers and indicate which qualifier conditions are valid |
|
input WpStopValid; // Signals that come from registers and indicate which stop conditions are valid |
input BpStopValid; // Signals that come from registers and indicate which stop conditions are valid |
input LSSStopValid; // Signals that come from registers and indicate which stop conditions are valid |
input IStopValid; // Signals that come from registers and indicate which stop conditions are valid |
// end: from registers |
|
|
output [`OPSELECTWIDTH-1:0] OpSelect; // Operation select (what kind of information is avaliable on the DataIn) |
output CpuStall_O; // CPU stall (stalls the RISC) |
output [39:0] TraceChain; // Scan shain from the trace module |
|
reg TraceEnable_d; |
reg TraceEnable; |
|
|
|
reg [`TRACECOUNTERWIDTH:0] Counter; |
reg [`TRACECOUNTERWIDTH-1:0] WritePointer; |
reg [`TRACECOUNTERWIDTH-1:0] ReadPointer; |
reg CpuStall; |
reg CpuStall_q; |
reg [`OPSELECTWIDTH-1:0] StallCounter; |
|
reg [`TRACESAMPLEWIDTH-1:0] Buffer[0:`TRACEBUFFERLENGTH-1]; |
|
reg TriggerLatch; |
|
|
/********************************************************************************** |
* * |
* Generation of the trigger * |
* * |
**********************************************************************************/ |
wire TempWpTrigger = |(Wp[10:0] & WpTrigger[10:0]); |
wire TempBpTrigger = Bp & BpTrigger; |
wire TempLSSTrigger = LsStatus[3:0] == LSSTrigger[3:0]; |
wire TempITrigger = IStatus[1:0] == ITrigger[1:0]; |
|
wire TempTriggerAND = ( (TempWpTrigger | ~WpTriggerValid) |
& (TempBpTrigger | ~BpTriggerValid) |
& (TempLSSTrigger | ~LSSTriggerValid) |
& (TempITrigger | ~ITriggerValid) |
) |
& (WpTriggerValid | BpTriggerValid | LSSTriggerValid | ITriggerValid); |
|
wire TempTriggerOR = ( (TempWpTrigger & WpTriggerValid) |
| (TempBpTrigger & BpTriggerValid) |
| (TempLSSTrigger & LSSTriggerValid) |
| (TempITrigger & ITriggerValid) |
); |
|
wire Trigger = TraceEnable & (~TriggerOper[1]? 1 : // any |
TriggerOper[0]? TempTriggerAND : TempTriggerOR // AND : OR |
); |
|
/********************************************************************************** |
* * |
* Generation of the qualifier * |
* * |
**********************************************************************************/ |
wire TempWpQualifier = |(Wp[10:0] & WpQualif[10:0]); |
wire TempBpQualifier = Bp & BpQualif; |
wire TempLSSQualifier = LsStatus[3:0] == LSSQualif[3:0]; |
wire TempIQualifier = IStatus[1:0] == IQualif[1:0]; |
|
wire TempQualifierAND = ( (TempWpQualifier | ~WpQualifValid) |
& (TempBpQualifier | ~BpQualifValid) |
& (TempLSSQualifier | ~LSSQualifValid) |
& (TempIQualifier | ~IQualifValid) |
) |
& (WpQualifValid | BpQualifValid | LSSQualifValid | IQualifValid); |
|
wire TempQualifierOR = ( (TempWpQualifier & WpQualifValid) |
| (TempBpQualifier & BpQualifValid) |
| (TempLSSQualifier & LSSQualifValid) |
| (TempIQualifier & IQualifValid) |
); |
|
|
wire Stop; |
wire Qualifier = TraceEnable & ~Stop & (~QualifOper[1]? 1 : // any |
QualifOper[0]? TempQualifierAND : TempQualifierOR // AND : OR |
); |
|
/********************************************************************************** |
* * |
* Generation of the stop signal * |
* * |
**********************************************************************************/ |
wire TempWpStop = |(Wp[10:0] & WpStop[10:0]); |
wire TempBpStop = Bp & BpStop; |
wire TempLSSStop = LsStatus[3:0] == LSSStop[3:0]; |
wire TempIStop = IStatus[1:0] == IStop[1:0]; |
|
wire TempStopAND = ( (TempWpStop | ~WpStopValid) |
& (TempBpStop | ~BpStopValid) |
& (TempLSSStop | ~LSSStopValid) |
& (TempIStop | ~IStopValid) |
) |
& (WpStopValid | BpStopValid | LSSStopValid | IStopValid); |
|
wire TempStopOR = ( (TempWpStop & WpStopValid) |
| (TempBpStop & BpStopValid) |
| (TempLSSStop & LSSStopValid) |
| (TempIStop & IStopValid) |
); |
|
|
assign Stop = TraceEnable & (~StopOper[1]? 0 : // nothing |
StopOper[0]? TempStopAND : TempStopOR // AND : OR |
); |
|
|
|
/********************************************************************************** |
* * |
* Generation of the TriggerLatch * |
* * |
**********************************************************************************/ |
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
TriggerLatch<=#Tp 0; |
else |
if(TriggerLatch & ~TraceEnable) |
TriggerLatch<=#Tp 0; |
else |
if(Trigger) |
TriggerLatch<=#Tp 1; |
end |
|
|
|
|
/********************************************************************************** |
* * |
* TraceEnable Synchronization * |
* * |
**********************************************************************************/ |
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
begin |
TraceEnable_d<=#Tp 0; |
TraceEnable<=#Tp 0; |
end |
else |
begin |
TraceEnable_d<=#Tp TraceEnable_reg; |
TraceEnable<=#Tp TraceEnable_d; |
end |
end |
|
|
|
|
/********************************************************************************** |
* * |
* CpuStall, counter and pointers generation * |
* * |
**********************************************************************************/ |
reg BufferFullDetected; |
wire [`OPSELECTIONCOUNTER-1:0] RecEnable; |
|
wire BufferFull = Counter[`TRACECOUNTERWIDTH:0]==`TRACEBUFFERLENGTH; |
wire BufferEmpty = Counter[`TRACECOUNTERWIDTH:0]==0; |
wire IncrementCounter = CpuStall_q & ~(BufferFull | BufferFullDetected) & Qualifier & RecEnable[StallCounter]; |
wire IncrementPointer = CpuStall_q & (~BufferFull | ContinMode) & Qualifier & RecEnable[StallCounter]; |
|
wire WriteSample = IncrementPointer; |
|
wire Decrement = ReadBuffer & ~BufferEmpty & (~ContinMode | ContinMode & ~TraceEnable); |
wire CounterEn = IncrementCounter ^ Decrement; |
|
wire SyncResetCpuStall; |
wire ResetStallCounter; |
reg BufferFull_q; |
reg BufferFull_2q; |
|
reg Qualifier_mclk; |
|
always @(posedge Mclk) |
begin |
Qualifier_mclk<=#Tp Qualifier; |
BufferFull_q<=#Tp BufferFull; |
BufferFull_2q<=#Tp BufferFull_q; |
CpuStall_q <=#Tp CpuStall_O; |
end |
|
|
wire FirstCpuStall = Qualifier & ~Qualifier_mclk & TriggerLatch | |
Qualifier_mclk & Trigger & ~TriggerLatch | |
Qualifier & Trigger & ~Qualifier_mclk & ~TriggerLatch ; |
|
|
//wire SyncSetCpuStall = Qualifier_mclk & TriggerLatch & |
|
wire SyncSetCpuStall = CpuStall_O & ~CpuStall_q | |
Qualifier_mclk & TriggerLatch & |
( |
(~ContinMode & ~BufferFull & ~BufferFull_q & StallCounter==`OPSELECTIONCOUNTER-1) | |
(~ContinMode & ~BufferFull_q & BufferFull_2q & StallCounter==0) | |
( ContinMode & StallCounter==`OPSELECTIONCOUNTER-1) |
); |
|
assign SyncResetCpuStall = ( |
(~ContinMode & ~BufferFull & ~BufferFull_q & StallCounter==`OPSELECTIONCOUNTER-2) | |
(~ContinMode & ~BufferFull & BufferFull_q & StallCounter==`OPSELECTIONCOUNTER-1) | |
( ContinMode & StallCounter==`OPSELECTIONCOUNTER-2) |
); |
|
assign CpuStall_O = FirstCpuStall | CpuStall; |
|
|
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
Counter<=#Tp 0; |
else |
if(CounterEn) |
if(IncrementCounter) |
Counter[`TRACECOUNTERWIDTH:0]<=#Tp Counter[`TRACECOUNTERWIDTH:0] + 1; |
else |
Counter[`TRACECOUNTERWIDTH:0]<=#Tp Counter[`TRACECOUNTERWIDTH:0] - 1; |
end |
|
|
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
WritePointer<=#Tp 0; |
else |
if(IncrementPointer) |
WritePointer[`TRACECOUNTERWIDTH-1:0]<=#Tp WritePointer[`TRACECOUNTERWIDTH-1:0] + 1; |
end |
|
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
ReadPointer<=#Tp 0; |
else |
if(Decrement & ~ContinMode | Decrement & ContinMode & ~TraceEnable) |
ReadPointer[`TRACECOUNTERWIDTH-1:0]<=#Tp ReadPointer[`TRACECOUNTERWIDTH-1:0] + 1; |
else |
if(ContinMode & IncrementPointer & (BufferFull | BufferFullDetected)) |
ReadPointer[`TRACECOUNTERWIDTH-1:0]<=#Tp WritePointer[`TRACECOUNTERWIDTH-1:0] + 1; |
end |
|
always @(posedge Mclk) |
begin |
if(~TraceEnable) |
BufferFullDetected<=#Tp 0; |
else |
if(ContinMode & BufferFull) |
BufferFullDetected<=#Tp 1; |
end |
|
|
always @(posedge Mclk or posedge Reset) |
begin |
if(Reset) |
CpuStall<=#Tp 0; |
else |
if(SyncResetCpuStall) |
CpuStall<=#Tp 0; |
else |
if(SyncSetCpuStall) |
CpuStall<=#Tp 1; |
end |
|
|
always @(posedge Mclk) |
begin |
if(ResetStallCounter) |
StallCounter<=#Tp 0; |
else |
if(CpuStall_q & (~BufferFull | ContinMode)) |
StallCounter<=#Tp StallCounter+1; |
end |
|
assign ResetStallCounter = StallCounter==(`OPSELECTIONCOUNTER-1) & ~BufferFull | Reset; |
|
|
/********************************************************************************** |
* * |
* Valid status * |
* * |
**********************************************************************************/ |
wire Valid = ~BufferEmpty; |
|
|
/********************************************************************************** |
* * |
* Writing and reading the sample to/from the buffer * |
* * |
**********************************************************************************/ |
always @ (posedge Mclk) |
begin |
if(WriteSample) |
Buffer[WritePointer[`TRACECOUNTERWIDTH-1:0]]<={DataIn, 1'b0, OpSelect[`OPSELECTWIDTH-1:0]}; |
end |
|
assign TraceChain = {Buffer[ReadPointer], 3'h0, Valid}; |
|
|
|
/********************************************************************************** |
* * |
* Operation select (to select which kind of data appears on the DATAIN lines) * |
* * |
**********************************************************************************/ |
assign OpSelect[`OPSELECTWIDTH-1:0] = StallCounter[`OPSELECTWIDTH-1:0]; |
|
|
|
/********************************************************************************** |
* * |
* Selecting which parts are going to be recorded as part of the sample * |
* * |
**********************************************************************************/ |
assign RecEnable = {1'b0, RecordINSTR, RecordWriteSPR, RecordReadSPR, RecordSDATA, RecordLDATA, RecordLSEA, RecordPC}; |
|
|
endmodule |
/tags/old_debug/rtl/verilog/dbg_register.v
0,0 → 1,101
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_register.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.5 2002/04/29 08:41:02 mohor |
// Asynchronous reset used instead of synchronous. |
// |
// Revision 1.4 2002/04/22 12:54:11 mohor |
// Signal names changed to lower case. |
// |
// Revision 1.3 2001/11/26 10:47:09 mohor |
// Crc generation is different for read or write commands. Small synthesys fixes. |
// |
// Revision 1.2 2001/10/19 11:40:02 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// |
// |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
|
module dbg_register(data_in, data_out, write, clk, reset); |
|
parameter WIDTH = 8; // default parameter of the register width |
parameter RESET_VALUE = 0; |
|
input [WIDTH-1:0] data_in; |
|
input write; |
input clk; |
input reset; |
|
output [WIDTH-1:0] data_out; |
reg [WIDTH-1:0] data_out; |
|
always @ (posedge clk or posedge reset) |
//always @ (posedge clk) |
begin |
if(reset) |
data_out[WIDTH-1:0]<=#1 RESET_VALUE; |
else |
begin |
if(write) // write |
data_out[WIDTH-1:0]<=#1 data_in[WIDTH-1:0]; |
end |
end |
|
|
endmodule // Register |
|
/tags/old_debug/rtl/verilog/dbg_crc8_d1.v
0,0 → 1,147
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_crc8_d1 crc1.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.6 2002/04/09 14:19:22 mohor |
// Function changed to logic because of some synthesis warnings. |
// |
// Revision 1.5 2001/12/06 10:01:57 mohor |
// Warnings from synthesys tools fixed. |
// |
// Revision 1.4 2001/11/26 10:47:09 mohor |
// Crc generation is different for read or write commands. Small synthesys fixes. |
// |
// Revision 1.3 2001/10/19 11:40:02 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.2 2001/09/20 10:11:25 mohor |
// Working version. Few bugs fixed, comments added. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.3 2001/06/01 22:22:36 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.2 2001/05/18 13:10:00 mohor |
// Headers changed. All additional information is now avaliable in the README.txt file. |
// |
// Revision 1.1.1.1 2001/05/18 06:35:03 mohor |
// Initial release |
// |
// |
/////////////////////////////////////////////////////////////////////// |
// File: CRC8_D1.v |
// Date: Fri Apr 27 20:56:55 2001 |
// |
// Copyright (C) 1999 Easics NV. |
// This source file may be used and distributed without restriction |
// provided that this copyright statement is not removed from the file |
// and that any derivative work contains the original copyright notice |
// and the associated disclaimer. |
// |
// THIS SOURCE FILE IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS |
// OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED |
// WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. |
// |
// Purpose: Verilog module containing a synthesizable CRC function |
// * polynomial: (0 1 2 8) |
// * data width: 1 |
// |
// Info: jand@easics.be (Jan Decaluwe) |
// http://www.easics.com |
/////////////////////////////////////////////////////////////////////// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
|
module dbg_crc8_d1 (data, enable_crc, reset, sync_rst_crc, crc_out, clk); |
|
parameter Tp = 1; |
|
|
input data; |
input enable_crc; |
input reset; |
input sync_rst_crc; |
input clk; |
|
|
output [7:0] crc_out; |
reg [7:0] crc_out; |
|
wire [7:0] NewCRC; |
|
assign NewCRC[0] = data ^ crc_out[7]; |
assign NewCRC[1] = data ^ crc_out[0] ^ crc_out[7]; |
assign NewCRC[2] = data ^ crc_out[1] ^ crc_out[7]; |
assign NewCRC[3] = crc_out[2]; |
assign NewCRC[4] = crc_out[3]; |
assign NewCRC[5] = crc_out[4]; |
assign NewCRC[6] = crc_out[5]; |
assign NewCRC[7] = crc_out[6]; |
|
|
|
always @ (posedge clk or posedge reset) |
begin |
if(reset) |
crc_out[7:0] <= #Tp 0; |
else |
if(sync_rst_crc) |
crc_out[7:0] <= #Tp 0; |
else |
if(enable_crc) |
crc_out[7:0] <= #Tp NewCRC; |
end |
|
|
|
endmodule |
/tags/old_debug/rtl/verilog/jtag_chain.v
0,0 → 1,75
////////////////////////////////////////////////////////////////////// |
//// //// |
//// jtag_chain.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/projects/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000, 2001, 2002 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
`include "dbg_defines.v" |
|
// Top module |
module jtag_chain ( capture_dr_i, shift_dr_i, update_dr_i, extest_selected_i, |
bs_chain_i, bs_chain_o |
); |
|
parameter Tp = 1; |
|
|
input capture_dr_i; |
input shift_dr_i; |
input update_dr_i; |
input extest_selected_i; |
input bs_chain_i; |
|
output bs_chain_o; |
|
assign bs_chain_o = 0; |
|
endmodule |
/tags/old_debug/rtl/verilog/dbg_sync_clk1_clk2.v
0,0 → 1,151
////////////////////////////////////////////////////////////////////// |
//// //// |
//// dbg_sync_clk1_clk2.v //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// Author(s): //// |
//// - Igor Mohor (igorM@opencores.org) //// |
//// //// |
//// All additional information is avaliable in the Readme.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.2 2001/10/19 11:40:01 mohor |
// dbg_timescale.v changed to timescale.v This is done for the simulation of |
// few different cores in a single project. |
// |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// |
// |
// |
// |
|
// synopsys translate_off |
`include "timescale.v" |
// synopsys translate_on |
|
// FF in clock domain 1 is being set by a signal from the clock domain 2 |
module dbg_sync_clk1_clk2 (clk1, clk2, reset1, reset2, set2, sync_out); |
|
parameter Tp = 1; |
|
input clk1; |
input clk2; |
input reset1; |
input reset2; |
input set2; |
|
output sync_out; |
|
reg set2_q; |
reg set2_q2; |
reg set1_q; |
reg set1_q2; |
reg clear2_q; |
reg clear2_q2; |
reg sync_out; |
|
wire z; |
|
assign z = set2 | set2_q & ~clear2_q2; |
|
|
// Latching and synchronizing "set" to clk2 |
always @ (posedge clk2 or posedge reset2) |
begin |
if(reset2) |
set2_q <=#Tp 1'b0; |
else |
set2_q <=#Tp z; |
end |
|
|
always @ (posedge clk2 or posedge reset2) |
begin |
if(reset2) |
set2_q2 <=#Tp 1'b0; |
else |
set2_q2 <=#Tp set2_q; |
end |
|
|
// Synchronizing "set" to clk1 |
always @ (posedge clk1 or posedge reset1) |
begin |
if(reset1) |
set1_q <=#Tp 1'b0; |
else |
set1_q <=#Tp set2_q2; |
end |
|
|
always @ (posedge clk1 or posedge reset1) |
begin |
if(reset1) |
set1_q2 <=#Tp 1'b0; |
else |
set1_q2 <=#Tp set1_q; |
end |
|
|
// Synchronizing "clear" to clk2 |
always @ (posedge clk2 or posedge reset2) |
begin |
if(reset2) |
clear2_q <=#Tp 1'b0; |
else |
clear2_q <=#Tp set1_q2; |
end |
|
|
always @ (posedge clk2 or posedge reset2) |
begin |
if(reset2) |
clear2_q2 <=#Tp 1'b0; |
else |
clear2_q2 <=#Tp clear2_q; |
end |
|
|
always @ (posedge clk1 or posedge reset1) |
begin |
if(reset1) |
sync_out <=#Tp 1'b0; |
else |
sync_out <=#Tp set1_q2; |
end |
|
endmodule |
/tags/old_debug/rtl/verilog/timescale.v
0,0 → 1,57
////////////////////////////////////////////////////////////////////// |
//// //// |
//// timescale.v //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in the README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// |
// |
// |
// |
|
|
`timescale 1ns / 1ns |
/tags/old_debug/rtl/README.txt
0,0 → 1,114
////////////////////////////////////////////////////////////////////// |
//// //// |
//// README.txt //// |
//// //// |
//// //// |
//// This file is part of the SoC/OpenRISC Development Interface //// |
//// http://www.opencores.org/cores/DebugInterface/ //// |
//// //// |
//// //// |
//// Author(s): //// |
//// Igor Mohor //// |
//// igorm@opencores.org //// |
//// //// |
//// //// |
//// All additional information is avaliable in this README.txt //// |
//// file. //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
//// //// |
//// Copyright (C) 2000,2001 Authors //// |
//// //// |
//// This source file may be used and distributed without //// |
//// restriction provided that this copyright statement is not //// |
//// removed from the file and that any derivative work contains //// |
//// the original copyright notice and the associated disclaimer. //// |
//// //// |
//// This source file is free software; you can redistribute it //// |
//// and/or modify it under the terms of the GNU Lesser General //// |
//// Public License as published by the Free Software Foundation; //// |
//// either version 2.1 of the License, or (at your option) any //// |
//// later version. //// |
//// //// |
//// This source is distributed in the hope that it will be //// |
//// useful, but WITHOUT ANY WARRANTY; without even the implied //// |
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //// |
//// PURPOSE. See the GNU Lesser General Public License for more //// |
//// details. //// |
//// //// |
//// You should have received a copy of the GNU Lesser General //// |
//// Public License along with this source; if not, download it //// |
//// from http://www.opencores.org/lgpl.shtml //// |
//// //// |
////////////////////////////////////////////////////////////////////// |
// |
// CVS Revision History |
// |
// $Log: not supported by cvs2svn $ |
// Revision 1.1.1.1 2001/09/13 13:49:19 mohor |
// Initial official release. |
// |
// Revision 1.2 2001/06/01 22:22:35 mohor |
// This is a backup. It is not a fully working version. Not for use, yet. |
// |
// Revision 1.1 2001/05/18 13:12:09 mohor |
// Header changed. All additional information is now avaliable in this README.txt file. |
// |
// |
|
|
|
PROJECT: |
SoC/OpenRISC Development (debug) Interface |
|
|
PROJECT AND DOCUMENTATION ON THE WEB: |
|
The project that this files are part of is avaliable on the opencores |
web page: |
|
http://www.opencores.org/cores/DebugInterface/ |
|
Documentation can also be found there. For direct download of the |
documentation go to: |
|
http://www.opencores.org/cgi-bin/cvsget.cgi/dbg_interface/doc/DbgSupp.pdf |
|
|
|
|
OVERVIEW (main Features): |
|
Development Interface is used for development purposes |
(Boundary Scan testing and debugging). It is an interface |
between the RISC, peripheral cores and any commercial |
debugger/emulator or BS testing device. The external |
debugger or BS tester connects to the core via JTAG port. |
The Development Port also contains a trace and support for |
tracing the program flow, execution coverage and profiling |
the code. |
|
dbg_tb.v is a testbench file. |
file_communication.v is used for simulating the whole design together with the |
debugger through two files that make a JTAG interface |
dbg_top.v is top level module of the development interface design |
|
|
|
COMPATIBILITY: |
|
- WISHBONE rev B.1 |
- IEEE 1149.1 (JTAG) |
|
|
|
KNOWN PROBLEMS (limits): |
- RISC changes Watchpoints and breakpoints on rising edge of the |
Mclk clock signal. Simulation should do the same. |
|
|
|
TO DO: |
- Add a WISHBONE master support if needed |
- Add support for boundary scan (This is already done, but not yet incorporated in the design) |
|
/tags/old_debug/bench/verilog/timescale.v
0,0 → 1,114
`timescale 1ns/10ps |
tags/old_debug/bench/verilog/timescale.v
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/bench/verilog/dbg_tb.v
===================================================================
--- tags/old_debug/bench/verilog/dbg_tb.v (nonexistent)
+++ tags/old_debug/bench/verilog/dbg_tb.v (revision 78)
@@ -0,0 +1,1032 @@
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// dbg_tb.v ////
+//// ////
+//// ////
+//// This file is part of the SoC/OpenRISC Development Interface ////
+//// http://www.opencores.org/projects/DebugInterface/ ////
+//// ////
+//// ////
+//// Author(s): ////
+//// Igor Mohor ////
+//// igorm@opencores.org ////
+//// ////
+//// ////
+//// All additional information is avaliable in the README.txt ////
+//// file. ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//// ////
+//// Copyright (C) 2000,2001 Authors ////
+//// ////
+//// This source file may be used and distributed without ////
+//// restriction provided that this copyright statement is not ////
+//// removed from the file and that any derivative work contains ////
+//// the original copyright notice and the associated disclaimer. ////
+//// ////
+//// This source file is free software; you can redistribute it ////
+//// and/or modify it under the terms of the GNU Lesser General ////
+//// Public License as published by the Free Software Foundation; ////
+//// either version 2.1 of the License, or (at your option) any ////
+//// later version. ////
+//// ////
+//// This source is distributed in the hope that it will be ////
+//// useful, but WITHOUT ANY WARRANTY; without even the implied ////
+//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////
+//// PURPOSE. See the GNU Lesser General Public License for more ////
+//// details. ////
+//// ////
+//// You should have received a copy of the GNU Lesser General ////
+//// Public License along with this source; if not, download it ////
+//// from http://www.opencores.org/lgpl.shtml ////
+//// ////
+//////////////////////////////////////////////////////////////////////
+//
+// CVS Revision History
+//
+// $Log: not supported by cvs2svn $
+// Revision 1.13 2003/08/28 13:54:33 simons
+// Three more chains added for cpu debug access.
+//
+// Revision 1.12 2002/05/07 14:44:52 mohor
+// mon_cntl_o signals that controls monitor mux added.
+//
+// Revision 1.11 2002/03/12 14:32:26 mohor
+// Few outputs for boundary scan chain added.
+//
+// Revision 1.10 2002/03/08 15:27:08 mohor
+// Structure changed. Hooks for jtag chain added.
+//
+// Revision 1.9 2001/10/19 11:39:20 mohor
+// dbg_timescale.v changed to timescale.v This is done for the simulation of
+// few different cores in a single project.
+//
+// Revision 1.8 2001/10/17 10:39:17 mohor
+// bs_chain_o added.
+//
+// Revision 1.7 2001/10/16 10:10:18 mohor
+// Signal names changed to lowercase.
+//
+// Revision 1.6 2001/10/15 09:52:50 mohor
+// Wishbone interface added, few fixes for better performance,
+// hooks for boundary scan testing added.
+//
+// Revision 1.5 2001/09/24 14:06:12 mohor
+// Changes connected to the OpenRISC access (SPR read, SPR write).
+//
+// Revision 1.4 2001/09/20 10:10:29 mohor
+// Working version. Few bugs fixed, comments added.
+//
+// Revision 1.3 2001/09/19 11:54:03 mohor
+// Minor changes for simulation.
+//
+// Revision 1.2 2001/09/18 14:12:43 mohor
+// Trace fixed. Some registers changed, trace simplified.
+//
+// Revision 1.1.1.1 2001/09/13 13:49:19 mohor
+// Initial official release.
+//
+// Revision 1.3 2001/06/01 22:23:40 mohor
+// This is a backup. It is not a fully working version. Not for use, yet.
+//
+// Revision 1.2 2001/05/18 13:10:05 mohor
+// Headers changed. All additional information is now avaliable in the README.txt file.
+//
+// Revision 1.1.1.1 2001/05/18 06:35:15 mohor
+// Initial release
+//
+//
+
+
+`include "timescale.v"
+`include "dbg_defines.v"
+`include "dbg_tb_defines.v"
+
+// Test bench
+module dbg_tb;
+
+parameter Tp = 1;
+parameter Tclk = 50; // Clock half period (Clok period = 100 ns => 10 MHz)
+
+
+reg P_TMS, P_TCK;
+reg P_TRST, P_TDI;
+reg wb_rst_i;
+reg Mclk;
+
+reg [10:0] Wp;
+reg Bp;
+reg [3:0] LsStatus;
+reg [1:0] IStatus;
+reg BS_CHAIN_I;
+reg MBIST_I;
+
+wire P_TDO;
+wire [31:0] ADDR_CPU;
+wire [31:0] DATAIN_CPU; // DATAIN_CPU is connect to DATAOUT
+
+wire [31:0] DATAOUT_CPU; // DATAOUT_CPU is connect to DATAIN
+
+wire [`OPSELECTWIDTH-1:0] OpSelect;
+
+wire [31:0] wb_adr_i;
+wire [31:0] wb_dat_i;
+reg [31:0] wb_dat_o;
+wire wb_cyc_i;
+wire wb_stb_i;
+wire [3:0] wb_sel_i;
+wire wb_we_i;
+reg wb_ack_o;
+wire wb_cab_i;
+reg wb_err_o;
+
+wire ShiftDR;
+wire Exit1DR;
+wire UpdateDR;
+wire UpdateDR_q;
+wire CaptureDR;
+wire SelectDRScan;
+wire IDCODESelected;
+wire CHAIN_SELECTSelected;
+wire DEBUGSelected;
+wire TDOData_dbg;
+wire BypassRegister;
+wire EXTESTSelected;
+wire MBISTSelected;
+wire [3:0] mon_cntl_o;
+wire CpuDebugScanChain0;
+wire CpuDebugScanChain1;
+wire CpuDebugScanChain2;
+wire CpuDebugScanChain3;
+
+
+// Connecting TAP module
+tap_top i_tap_top
+ (.tms_pad_i(P_TMS), .tck_pad_i(P_TCK), .trst_pad_i(P_TRST), .tdi_pad_i(P_TDI),
+ .tdo_pad_o(P_TDO), .tdo_padoe_o(tdo_padoe_o),
+
+ // TAP states
+ .ShiftDR(ShiftDR), .Exit1DR(Exit1DR), .UpdateDR(UpdateDR), .UpdateDR_q(UpdateDR_q),
+ .CaptureDR(CaptureDR), .SelectDRScan(SelectDRScan),
+
+ // Instructions
+ .IDCODESelected(IDCODESelected), .CHAIN_SELECTSelected(CHAIN_SELECTSelected),
+ .DEBUGSelected(DEBUGSelected), .EXTESTSelected(EXTESTSelected),
+ .MBISTSelected(MBISTSelected),
+
+ // TDO from dbg module
+ .TDOData_dbg(TDOData_dbg), .BypassRegister(BypassRegister),
+
+ // Boundary Scan Chain
+ .bs_chain_i(BS_CHAIN_I),
+
+ // From Mbist Chain
+ .mbist_so_i(MBIST_I),
+
+ // Selected chains
+ .RegisterScanChain(RegisterScanChain),
+ .CpuDebugScanChain0(CpuDebugScanChain0),
+ .CpuDebugScanChain1(CpuDebugScanChain1),
+ .CpuDebugScanChain2(CpuDebugScanChain2),
+ .CpuDebugScanChain3(CpuDebugScanChain3),
+ .WishboneScanChain(WishboneScanChain)
+
+ );
+
+
+
+dbg_top i_dbg_top
+ (
+ .cpu_clk_i(Mclk), .cpu_addr_o(ADDR_CPU), .cpu_data_i(DATAOUT_CPU),
+ .cpu_data_o(DATAIN_CPU), .wp_i(Wp), .bp_i(Bp), .opselect_o(OpSelect),
+ .lsstatus_i(LsStatus), .istatus_i(IStatus), .cpu_stall_o(),
+ .cpu_stall_all_o(), .cpu_sel_o(), .reset_o(),
+
+ .wb_rst_i(wb_rst_i), .wb_clk_i(Mclk),
+
+ .wb_adr_o(wb_adr_i), .wb_dat_o(wb_dat_i), .wb_dat_i(wb_dat_o),
+ .wb_cyc_o(wb_cyc_i), .wb_stb_o(wb_stb_i), .wb_sel_o(wb_sel_i),
+ .wb_we_o(wb_we_i), .wb_ack_i(wb_ack_o), .wb_cab_o(wb_cab_i),
+ .wb_err_i(wb_err_o),
+
+ // TAP states
+ .ShiftDR(ShiftDR), .Exit1DR(Exit1DR), .UpdateDR(UpdateDR), .UpdateDR_q(UpdateDR_q),
+ .SelectDRScan(SelectDRScan),
+
+ // Instructions
+ .IDCODESelected(IDCODESelected), .CHAIN_SELECTSelected(CHAIN_SELECTSelected),
+ .DEBUGSelected(DEBUGSelected),
+
+ // TAP signals
+ .trst_in(P_TRST), .tck(P_TCK), .tdi(P_TDI), .TDOData(TDOData_dbg),
+
+ .BypassRegister(BypassRegister),
+
+
+ .mon_cntl_o(mon_cntl_o),
+
+ // Selected chains
+ .RegisterScanChain(RegisterScanChain),
+ .CpuDebugScanChain0(CpuDebugScanChain0),
+ .CpuDebugScanChain1(CpuDebugScanChain1),
+ .CpuDebugScanChain2(CpuDebugScanChain2),
+ .CpuDebugScanChain3(CpuDebugScanChain3),
+ .WishboneScanChain(WishboneScanChain)
+
+ );
+
+reg TestEnabled;
+
+
+
+initial
+begin
+ TestEnabled<=#Tp 0;
+ P_TMS<=#Tp 'hz;
+ P_TCK<=#Tp 'hz;
+ P_TDI<=#Tp 'hz;
+ BS_CHAIN_I = 0;
+ MBIST_I = 0;
+
+ Wp<=#Tp 0;
+ Bp<=#Tp 0;
+ LsStatus<=#Tp 0;
+ IStatus<=#Tp 0;
+
+ wb_dat_o<=#Tp 32'h0;
+ wb_ack_o<=#Tp 1'h0;
+ wb_err_o<=#Tp 1'h0;
+
+
+
+ wb_rst_i<=#Tp 0;
+ P_TRST<=#Tp 0;
+ #100 wb_rst_i<=#Tp 1;
+ P_TRST<=#Tp 1;
+ #100 wb_rst_i<=#Tp 0;
+ P_TRST<=#Tp 0;
+ #Tp TestEnabled<=#Tp 1;
+end
+
+
+// Generating master clock (cpu clock) 200 MHz
+initial
+begin
+ Mclk<=#Tp 0;
+ #1 forever #`CPU_CLOCK Mclk<=~Mclk;
+end
+
+
+// Generating random number for use in DATAOUT_CPU[31:0]
+reg [31:0] RandNumb;
+always @ (posedge Mclk or posedge wb_rst_i)
+begin
+ if(wb_rst_i)
+ RandNumb[31:0]<=#Tp 0;
+ else
+ RandNumb[31:0]<=#Tp RandNumb[31:0] + 1;
+end
+
+
+assign DATAOUT_CPU[31:0] = RandNumb[31:0];
+
+
+always @ (posedge TestEnabled)
+begin
+
+ $display("//////////////////////////////////////////////////////////////////////////////////////");
+ $display("// //");
+ $display("// (%0t) dbg_tb starting //", $time);
+ $display("// //");
+ $display("//////////////////////////////////////////////////////////////////////////////////////");
+
+ fork
+
+
+ begin
+ EnableWishboneSlave; // enabling WISHBONE slave
+ end
+
+
+ begin
+ ResetTAP;
+ GotoRunTestIdle;
+
+ // Testing read and write to WISHBONE (WB and CPU chain are the same)
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`WISHBONE_SCAN_CHAIN, 8'h36); // {chain, crc}
+ SetInstruction(`DEBUG);
+ WriteCPURegister(32'h18273645, 32'hbeefbeef, 8'haa); // {data, addr, crc}
+
+ #10000;
+ ReadCPURegister(32'h87654321, 8'hfd); // {addr, crc} // Wishbone and CPU accesses are similar
+ ReadCPURegister(32'h87654321, 8'hfd); // {addr, crc} // Wishbone and CPU accesses are similar
+
+ // Testing read and write to CPU0 registers
+ #10000;
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`CPU_DEBUG_CHAIN_0, 8'h12); // {chain, crc}
+ SetInstruction(`DEBUG);
+ WriteCPURegister(32'h11001100, 32'h00110011, 8'h86); // {data, addr, crc}
+
+ ReadCPURegister(32'h11001100, 8'hdb); // {addr, crc}
+ ReadCPURegister(32'h11001100, 8'hdb); // {addr, crc}
+
+ // Testing read and write to CPU1 registers
+ #10000;
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`CPU_DEBUG_CHAIN_1, 8'h2a); // {chain, crc}
+ SetInstruction(`DEBUG);
+ WriteCPURegister(32'h22002200, 32'h00220022, 8'h10); // {data, addr, crc}
+
+ ReadCPURegister(32'h22002200, 8'hee); // {addr, crc}
+ ReadCPURegister(32'h22002200, 8'hee); // {addr, crc}
+
+ // Testing read and write to CPU2 registers
+ #10000;
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`CPU_DEBUG_CHAIN_2, 8'h38); // {chain, crc}
+ SetInstruction(`DEBUG);
+ WriteCPURegister(32'h33003300, 32'h00330033, 8'hf4); // {data, addr, crc}
+
+ ReadCPURegister(32'h33003300, 8'h35); // {addr, crc}
+ ReadCPURegister(32'h33003300, 8'h35); // {addr, crc}
+
+ // Testing read and write to CPU3 registers
+ #10000;
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`CPU_DEBUG_CHAIN_3, 8'h07); // {chain, crc}
+ SetInstruction(`DEBUG);
+ WriteCPURegister(32'h44004400, 32'h00440044, 8'h5b); // {data, addr, crc}
+
+ ReadCPURegister(32'h44004400, 8'h77); // {addr, crc}
+ ReadCPURegister(32'h44004400, 8'h77); // {addr, crc}
+
+ // Testing read and write to internal registers
+ #10000;
+ SetInstruction(`IDCODE);
+ ReadIDCode;
+
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`REGISTER_SCAN_CHAIN, 8'h0e); // {chain, crc}
+ SetInstruction(`DEBUG);
+
+
+ // Testing internal registers
+ WriteRegister(32'h00000001, `CPUOP_ADR, 8'h4a); // {data, addr, crc}
+ WriteRegister(32'h00000002, `CPUOP_ADR, 8'he0); // {data, addr, crc}
+ WriteRegister(32'h00000004, `CPUOP_ADR, 8'hb5); // {data, addr, crc}
+ WriteRegister(32'h00000000, `CPUSEL_ADR, 8'h1f); // {data, addr, crc}
+ WriteRegister(32'h00000001, `CPUSEL_ADR, 8'h2e); // {data, addr, crc}
+ WriteRegister(32'h00000002, `CPUSEL_ADR, 8'h84); // {data, addr, crc}
+
+ ReadRegister(`CPUOP_ADR, 8'h19); // {addr, crc}
+ ReadRegister(`CPUOP_ADR, 8'h19); // {addr, crc}
+ ReadRegister(`CPUSEL_ADR, 8'h7d); // {addr, crc}
+ ReadRegister(`CPUSEL_ADR, 8'h7d); // {addr, crc}
+
+ //ReadRegister(`MODER_ADR, 8'h00); // {addr, crc}
+ //ReadRegister(`TSEL_ADR, 8'h64); // {addr, crc}
+ //ReadRegister(`QSEL_ADR, 8'h32); // {addr, crc}
+ //ReadRegister(`SSEL_ADR, 8'h56); // {addr, crc}
+ //ReadRegister(`RECSEL_ADR, 8'hc4); // {addr, crc}
+ //ReadRegister(`MON_CNTL_ADR, 8'ha0); // {addr, crc}
+ //ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z.
+ //ReadRegister(5'h1f, 8'h04); // {addr, crc} // Register address don't exist. Read should return high-Z.
+
+ //WriteRegister(32'h00000001, `MODER_ADR, 8'h53); // {data, addr, crc}
+ //WriteRegister(32'h00000020, `TSEL_ADR, 8'h5e); // {data, addr, crc}
+ //WriteRegister(32'h00000300, `QSEL_ADR, 8'hdd); // {data, addr, crc}
+ //WriteRegister(32'h00004000, `SSEL_ADR, 8'he2); // {data, addr, crc}
+ //WriteRegister(32'h0000dead, `RECSEL_ADR, 8'hfb); // {data, addr, crc}
+ //WriteRegister(32'h0000000d, `MON_CNTL_ADR, 8'h5a); // {data, addr, crc}
+
+
+ // testing trigger and qualifier
+ `ifdef TRACE_ENABLED
+ // Anything starts trigger and qualifier
+ #1000 WriteRegister(32'h00000000, `QSEL_ADR, 8'h50); // Any qualifier
+ #1000 WriteRegister(32'h00000000, `TSEL_ADR, 8'h06); // Any trigger
+ #1000 WriteRegister(32'h00000003, `RECSEL_ADR, 8'h0c); // Two samples are selected for recording (RECPC and RECLSEA)
+ #100 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal
+ #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled
+ // End: Anything starts trigger and qualifier //
+
+ /* Anything starts trigger, breakpoint starts qualifier
+ // Uncomment this part when you want to test it.
+ #1000 WriteRegister(`QUALIFOP_OR | `BPQUALIFVALID | `BPQUALIF, `QSEL_ADR, 8'had); // Any qualifier
+ #1000 WriteRegister(32'h00000000, `TSEL_ADR, 8'h06); // Any trigger
+ #1000 WriteRegister(32'h0000000c, `RECSEL_ADR, 8'h0f); // Two samples are selected for recording (RECSDATA and RECLDATA)
+ #1000 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal
+ #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled
+ wait(dbg_tb.i_dbg_top.TraceEnable)
+ @ (posedge Mclk);
+ #1 Bp = 1; // Set breakpoint
+ repeat(8) @(posedge Mclk);
+ wait(dbg_tb.i_dbg_top.dbgTrace1.CpuStall)
+ #1 Bp = 0; // Clear breakpoint
+ // End: Anything starts trigger, breakpoint starts qualifier */
+
+ /* Anything starts qualifier, breakpoint starts trigger
+ // Uncomment this part when you want to test it.
+ #1000 WriteRegister(32'h00000000, `QSEL_ADR, 8'h50); // Any qualifier
+ #1000 WriteRegister(`LSSTRIG_0 | `LSSTRIG_2 | `LSSTRIGVALID | `WPTRIG_4 | `WPTRIGVALID | `TRIGOP_AND, `TSEL_ADR, 8'had); // Trigger is AND of Watchpoint4 and LSSTRIG[0] and LSSTRIG[2]
+ #1000 WriteRegister(32'h00000003, `RECSEL_ADR, 8'h0c); // Two samples are selected for recording (RECPC and RECLSEA)
+ #1000 WriteRegister(32'h00000000, `SSEL_ADR, 8'h34); // No stop signal
+ #1000 WriteRegister(`ENABLE, `MODER_ADR, 8'hd4); // Trace enabled
+ wait(dbg_tb.i_dbg_top.TraceEnable)
+ @ (posedge Mclk)
+ Wp[4] = 1; // Set watchpoint[4]
+ LsStatus = 4'h5; // LsStatus[0] and LsStatus[2] are active
+ @ (posedge Mclk)
+ Wp[4] = 0; // Clear watchpoint[4]
+ LsStatus = 4'h0; // LsStatus[0] and LsStatus[2] are cleared
+ // End: Anything starts trigger and qualifier */
+
+ // Reading data from the trace buffer
+ SetInstruction(`CHAIN_SELECT);
+ ChainSelect(`TRACE_TEST_CHAIN, 8'h24); // {chain, crc}
+ SetInstruction(`DEBUG);
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ ReadTraceBuffer;
+ `endif // TRACE_ENABLED
+
+
+
+
+ #5000 GenClk(1); // One extra TCLK for debugging purposes
+ #1000 $stop;
+
+ end
+ join
+end
+
+// Generation of the TCLK signal
+task GenClk;
+ input [7:0] Number;
+ integer i;
+ begin
+ for(i=0; i
tags/old_debug/sim/rtl_sim/log/dir_keeper
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/run/clean
===================================================================
--- tags/old_debug/sim/rtl_sim/run/clean (nonexistent)
+++ tags/old_debug/sim/rtl_sim/run/clean (revision 78)
@@ -0,0 +1,4 @@
+rm ../bin/INCA_libs/worklib/*
+rm ../bin/INCA_libs/worklib/.*
+rm ../log/*.log
+rm -rf ../out/*.shm
tags/old_debug/sim/rtl_sim/run/clean
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/run/run_sim.scr
===================================================================
--- tags/old_debug/sim/rtl_sim/run/run_sim.scr (nonexistent)
+++ tags/old_debug/sim/rtl_sim/run/run_sim.scr (revision 78)
@@ -0,0 +1,72 @@
+#!/bin/csh -f
+
+if ( $# < 1 ) then
+ echo "First argument must be a top level module name!"
+ exit
+else
+ set SIM_TOP = $1
+endif
+
+set current_par = 1
+set output_waveform = 0
+while ( $current_par < $# )
+ @ current_par = $current_par + 1
+ case wave:
+ @ output_waveform = 1
+ breaksw
+ default:
+ echo 'Unknown option "'$argv[$current_par]'"!'
+ exit
+ breaksw
+ endsw
+end
+
+echo "-CDSLIB ../bin/cds.lib" > ncvlog.args
+echo "-HDLVAR ../bin/hdl.var" >> ncvlog.args
+echo "-MESSAGES" >> ncvlog.args
+echo "-INCDIR ../../../bench/verilog" >> ncvlog.args
+echo "-INCDIR ../../../rtl/verilog" >> ncvlog.args
+echo "-NOCOPYRIGHT" >> ncvlog.args
+echo "-LOGFILE ../log/ncvlog.log" >> ncvlog.args
+
+foreach filename ( `cat ../bin/rtl_file_list` )
+ echo "../../../rtl/verilog/"$filename >> ncvlog.args
+end
+
+foreach filename ( `cat ../bin/sim_file_list` )
+ echo "../../../bench/verilog/"$filename >> ncvlog.args
+end
+
+ncvlog -f ncvlog.args
+
+echo "-MESSAGES" > ncelab.args
+echo "-NOCOPYRIGHT" >> ncelab.args
+echo "-CDSLIB ../bin/cds.lib" >> ncelab.args
+echo "-HDLVAR ../bin/hdl.var" >> ncelab.args
+echo "-LOGFILE ../log/ncelab.log" >> ncelab.args
+echo "-SNAPSHOT worklib.bench:rtl" >> ncelab.args
+echo "-NO_TCHK_MSG" >> ncelab.args
+echo "-ACCESS +RWC" >> ncelab.args
+echo worklib.$SIM_TOP >> ncelab.args
+
+ncelab -f ncelab.args
+
+echo "-MESSAGES" > ncsim.args
+echo "-NOCOPYRIGHT" >> ncsim.args
+echo "-CDSLIB ../bin/cds.lib" >> ncsim.args
+echo "-HDLVAR ../bin/hdl.var" >> ncsim.args
+echo "-INPUT ncsim.tcl" >> ncsim.args
+echo "-LOGFILE ../log/ncsim.log" >> ncsim.args
+echo "worklib.bench:rtl" >> ncsim.args
+
+if ( $output_waveform ) then
+ echo "database -open waves -shm -into ../out/waves.shm" > ./ncsim.tcl
+ echo "probe -create -database waves $SIM_TOP -shm -all -depth all" >> ./ncsim.tcl
+ echo "run" >> ./ncsim.tcl
+else
+ echo "run" > ./ncsim.tcl
+endif
+
+echo "quit" >> ncsim.tcl
+
+ncsim -LICQUEUE -f ./ncsim.args
tags/old_debug/sim/rtl_sim/run/run_sim.scr
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/run/wave.do
===================================================================
--- tags/old_debug/sim/rtl_sim/run/wave.do (nonexistent)
+++ tags/old_debug/sim/rtl_sim/run/wave.do (revision 78)
@@ -0,0 +1,308 @@
+// Signalscan Version 6.7p1
+
+
+define noactivityindicator
+define analog waveform lines
+define add variable default overlay off
+define waveform window analogheight 1
+define terminal automatic
+define buttons control \
+ 1 opensimmulationfile \
+ 2 executedofile \
+ 3 designbrowser \
+ 4 waveform \
+ 5 source \
+ 6 breakpoints \
+ 7 definesourcessearchpath \
+ 8 exit \
+ 9 createbreakpoint \
+ 10 creategroup \
+ 11 createmarker \
+ 12 closesimmulationfile \
+ 13 renamesimmulationfile \
+ 14 replacesimulationfiledata \
+ 15 listopensimmulationfiles \
+ 16 savedofile
+define buttons waveform \
+ 1 undo \
+ 2 cut \
+ 3 copy \
+ 4 paste \
+ 5 delete \
+ 6 zoomin \
+ 7 zoomout \
+ 8 zoomoutfull \
+ 9 expand \
+ 10 createmarker \
+ 11 designbrowser:1 \
+ 12 variableradixbinary \
+ 13 variableradixoctal \
+ 14 variableradixdecimal \
+ 15 variableradixhexadecimal \
+ 16 variableradixascii
+define buttons designbrowser \
+ 1 undo \
+ 2 cut \
+ 3 copy \
+ 4 paste \
+ 5 delete \
+ 6 cdupscope \
+ 7 getallvariables \
+ 8 getdeepallvariables \
+ 9 addvariables \
+ 10 addvarsandclosewindow \
+ 11 closewindow \
+ 12 scopefiltermodule \
+ 13 scopefiltertask \
+ 14 scopefilterfunction \
+ 15 scopefilterblock \
+ 16 scopefilterprimitive
+define buttons event \
+ 1 undo \
+ 2 cut \
+ 3 copy \
+ 4 paste \
+ 5 delete \
+ 6 move \
+ 7 closewindow \
+ 8 duplicate \
+ 9 defineasrisingedge \
+ 10 defineasfallingedge \
+ 11 defineasanyedge \
+ 12 variableradixbinary \
+ 13 variableradixoctal \
+ 14 variableradixdecimal \
+ 15 variableradixhexadecimal \
+ 16 variableradixascii
+define buttons source \
+ 1 undo \
+ 2 cut \
+ 3 copy \
+ 4 paste \
+ 5 delete \
+ 6 createbreakpoint \
+ 7 creategroup \
+ 8 createmarker \
+ 9 createevent \
+ 10 createregisterpage \
+ 11 closewindow \
+ 12 opensimmulationfile \
+ 13 closesimmulationfile \
+ 14 renamesimmulationfile \
+ 15 replacesimulationfiledata \
+ 16 listopensimmulationfiles
+define buttons register \
+ 1 undo \
+ 2 cut \
+ 3 copy \
+ 4 paste \
+ 5 delete \
+ 6 createregisterpage \
+ 7 closewindow \
+ 8 continuefor \
+ 9 continueuntil \
+ 10 continueforever \
+ 11 stop \
+ 12 previous \
+ 13 next \
+ 14 variableradixbinary \
+ 15 variableradixhexadecimal \
+ 16 variableradixascii
+define show related transactions
+define exit prompt
+define event search direction forward
+define variable nofullhierarchy
+define variable nofilenames
+define variable nofullpathfilenames
+include bookmark with filenames
+include scope history without filenames
+define waveform window listpane 13.22
+define waveform window namepane 20.97
+define multivalueindication
+define pattern curpos dot
+define pattern cursor1 dot
+define pattern cursor2 dot
+define pattern marker dot
+define print designer "Igor Mohor"
+define print border
+define print color blackonwhite
+define print command "/usr/ucb/lpr -P%P"
+define print printer lp
+define print range visible
+define print variable visible
+define rise fall time low threshold percentage 10
+define rise fall time high threshold percentage 90
+define rise fall time low value 0
+define rise fall time high value 3.3
+define sendmail command "/usr/lib/sendmail"
+define sequence time width 30.00
+define snap
+
+define source noprompt
+define time units default
+define userdefinedbussymbol
+define user guide directory "/usr/local/designacc/signalscan-6.7p1/doc/html"
+define waveform window grid off
+define waveform window waveheight 14
+define waveform window wavespace 6
+define web browser command netscape
+define zoom outfull on initial add off
+add group \
+ tap_top \
+ dbg_tb.i_tap_top.tck_pad_i \
+ dbg_tb.i_tap_top.tdi_pad_i \
+ dbg_tb.i_tap_top.tdo_pad_o \
+ dbg_tb.i_tap_top.tdo_padoe_o \
+ dbg_tb.i_tap_top.tms_pad_i \
+ dbg_tb.i_tap_top.trst_pad_i \
+ dbg_tb.i_tap_top.TestLogicReset \
+ dbg_tb.i_tap_top.RunTestIdle \
+ dbg_tb.i_tap_top.SelectDRScan \
+ dbg_tb.i_tap_top.CaptureDR \
+ dbg_tb.i_tap_top.SelectIRScan \
+ dbg_tb.i_tap_top.CaptureIR \
+ dbg_tb.i_tap_top.PauseDR \
+ dbg_tb.i_tap_top.ShiftDR \
+ dbg_tb.i_tap_top.ShiftIR \
+ dbg_tb.i_tap_top.PauseIR \
+ dbg_tb.i_tap_top.UpdateDR \
+ dbg_tb.i_tap_top.UpdateIR \
+ dbg_tb.i_tap_top.UpdateDR_q \
+ dbg_tb.i_tap_top.Exit1DR \
+ dbg_tb.i_tap_top.Exit1IR \
+ dbg_tb.i_dbg_top.CrcMatch \
+ dbg_tb.i_dbg_top.crc_cnt[3:0]'h \
+ dbg_tb.i_dbg_top.crc_bypassed \
+ dbg_tb.i_dbg_top.CalculatedCrcIn[7:0]'h \
+ dbg_tb.i_dbg_top.CalculatedCrcOut[7:0]'h \
+ dbg_tb.i_dbg_top.BitCounter[7:0]'h \
+ dbg_tb.i_dbg_top.CalculatedCrcOut[7:0]'h \
+ dbg_tb.i_dbg_top.BitCounter[7:0]'h \
+ dbg_tb.i_dbg_top.TDOData \
+ dbg_tb.i_dbg_top.crc_cnt[3:0]'h \
+ dbg_tb.i_tap_top.JTAG_IR[3:0]'h \
+ dbg_tb.i_tap_top.LatchedJTAG_IR[3:0]'h \
+ dbg_tb.i_tap_top.BypassRegister \
+ dbg_tb.i_tap_top.CHAIN_SELECTSelected \
+ dbg_tb.i_tap_top.DEBUGSelected \
+ dbg_tb.i_tap_top.EXTESTSelected \
+ dbg_tb.i_tap_top.IDCODESelected \
+ dbg_tb.i_tap_top.MBISTSelected \
+ dbg_tb.i_tap_top.CpuDebugScanChain0 \
+ dbg_tb.i_tap_top.CpuDebugScanChain1 \
+ dbg_tb.i_tap_top.CpuDebugScanChain2 \
+ dbg_tb.i_tap_top.CpuDebugScanChain3 \
+ dbg_tb.i_tap_top.RegisterScanChain \
+ dbg_tb.i_tap_top.WishboneScanChain \
+ dbg_tb.i_tap_top.TDOData_dbg \
+ dbg_tb.i_tap_top.bs_chain_i \
+ dbg_tb.i_tap_top.mbist_so_i \
+
+add group \
+ dbg_registers \
+ dbg_tb.i_dbg_top.dbgregs.CPUOPOut[2:1]'h \
+ dbg_tb.i_dbg_top.dbgregs.CPUOP_Acc \
+ dbg_tb.i_dbg_top.dbgregs.CPUOP_Rd \
+ dbg_tb.i_dbg_top.dbgregs.CPUOP_Wr \
+ dbg_tb.i_dbg_top.dbgregs.CPUSELOut[1:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.CPUSEL_Acc \
+ dbg_tb.i_dbg_top.dbgregs.CPUSEL_Rd \
+ dbg_tb.i_dbg_top.dbgregs.CPUSEL_Wr \
+ dbg_tb.i_dbg_top.dbgregs.CpuStallBp \
+ dbg_tb.i_dbg_top.dbgregs.MODEROut[31:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.MODER_Acc \
+ dbg_tb.i_dbg_top.dbgregs.MODER_Rd \
+ dbg_tb.i_dbg_top.dbgregs.MODER_Wr \
+ dbg_tb.i_dbg_top.dbgregs.MONCNTLOut[3:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.MON_CNTL_Acc \
+ dbg_tb.i_dbg_top.dbgregs.MON_CNTL_Rd \
+ dbg_tb.i_dbg_top.dbgregs.MON_CNTL_Wr \
+ dbg_tb.i_dbg_top.dbgregs.WB_CNTLOut[1:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.WB_CNTL_Acc \
+ dbg_tb.i_dbg_top.dbgregs.WB_CNTL_Rd \
+ dbg_tb.i_dbg_top.dbgregs.WB_CNTL_Wr \
+ dbg_tb.i_dbg_top.dbgregs.access \
+ dbg_tb.i_dbg_top.dbgregs.address[4:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.bp \
+ dbg_tb.i_dbg_top.dbgregs.clk \
+ dbg_tb.i_dbg_top.dbgregs.cpu_reset \
+ dbg_tb.i_dbg_top.dbgregs.cpu_stall \
+ dbg_tb.i_dbg_top.dbgregs.cpu_stall_all \
+ dbg_tb.i_dbg_top.dbgregs.cpu_sel[1:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.data_in[31:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.data_out[31:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.mon_cntl_o[3:0]'h \
+ dbg_tb.i_dbg_top.dbgregs.reset \
+ dbg_tb.i_dbg_top.dbgregs.rw \
+ dbg_tb.i_dbg_top.dbgregs.wb_cntl_o[1:0]'h \
+
+add group \
+ dbg_top \
+ dbg_tb.i_dbg_top.BypassRegister \
+ dbg_tb.i_dbg_top.CHAIN_SELECTSelected \
+ dbg_tb.i_dbg_top.RegisterScanChain \
+ dbg_tb.i_dbg_top.CpuDebugScanChain0 \
+ dbg_tb.i_dbg_top.CpuDebugScanChain1 \
+ dbg_tb.i_dbg_top.CpuDebugScanChain2 \
+ dbg_tb.i_dbg_top.CpuDebugScanChain3 \
+ dbg_tb.i_dbg_top.cpu_addr_o[31:0]'h \
+ dbg_tb.i_dbg_top.cpu_data_i[31:0]'h \
+ dbg_tb.i_dbg_top.cpu_data_o[31:0]'h \
+ dbg_tb.i_dbg_top.opselect_o[2:0]'h \
+ dbg_tb.i_dbg_top.cpu_sel_o[1:0]'h \
+ dbg_tb.i_dbg_top.cpu_stall_all_o \
+ dbg_tb.i_dbg_top.cpu_stall_o \
+ dbg_tb.i_dbg_top.CpuStall_access \
+ dbg_tb.i_dbg_top.CpuStall_read_access_0 \
+ dbg_tb.i_dbg_top.CpuStall_read_access_1 \
+ dbg_tb.i_dbg_top.CpuStall_read_access_2 \
+ dbg_tb.i_dbg_top.CpuStall_read_access_3 \
+ dbg_tb.i_dbg_top.CpuStall_write_access_0 \
+ dbg_tb.i_dbg_top.CpuStall_write_access_1 \
+ dbg_tb.i_dbg_top.CpuStall_write_access_2 \
+ dbg_tb.i_dbg_top.CpuStall_write_access_3 \
+ dbg_tb.i_dbg_top.cpu_clk_i \
+ dbg_tb.i_dbg_top.DEBUGSelected \
+ dbg_tb.i_dbg_top.Exit1DR \
+ dbg_tb.i_dbg_top.IDCODESelected \
+ dbg_tb.i_dbg_top.ShiftDR \
+ dbg_tb.i_dbg_top.TDOData \
+ dbg_tb.i_dbg_top.UpdateDR \
+ dbg_tb.i_dbg_top.UpdateDR_q \
+ dbg_tb.i_dbg_top.WishboneScanChain \
+ dbg_tb.i_dbg_top.bp_i \
+ dbg_tb.i_dbg_top.cpu_addr_o[31:0]'h \
+ dbg_tb.i_dbg_top.cpu_clk_i \
+ dbg_tb.i_dbg_top.cpu_data_i[31:0]'h \
+ dbg_tb.i_dbg_top.cpu_data_o[31:0]'h \
+ dbg_tb.i_dbg_top.cpu_sel_o[1:0]'h \
+ dbg_tb.i_dbg_top.cpu_stall_all_o \
+ dbg_tb.i_dbg_top.cpu_stall_o \
+ dbg_tb.i_dbg_top.istatus_i[1:0]'h \
+ dbg_tb.i_dbg_top.lsstatus_i[3:0]'h \
+ dbg_tb.i_dbg_top.mon_cntl_o[3:0]'h \
+ dbg_tb.i_dbg_top.opselect_o[2:0]'h \
+ dbg_tb.i_dbg_top.reset_o \
+ dbg_tb.i_dbg_top.tck \
+ dbg_tb.i_dbg_top.tdi \
+ dbg_tb.i_dbg_top.trst_in \
+ dbg_tb.i_dbg_top.wb_ack_i \
+ dbg_tb.i_dbg_top.wb_adr_o[31:0]'h \
+ dbg_tb.i_dbg_top.wb_cab_o \
+ dbg_tb.i_dbg_top.wb_clk_i \
+ dbg_tb.i_dbg_top.wb_cyc_o \
+ dbg_tb.i_dbg_top.wb_dat_i[31:0]'h \
+ dbg_tb.i_dbg_top.wb_dat_o[31:0]'h \
+ dbg_tb.i_dbg_top.wb_err_i \
+ dbg_tb.i_dbg_top.wb_rst_i \
+ dbg_tb.i_dbg_top.wb_sel_o[3:0]'h \
+ dbg_tb.i_dbg_top.wb_stb_o \
+ dbg_tb.i_dbg_top.wb_we_o \
+ dbg_tb.i_dbg_top.wp_i[10:0]'h \
+ dbg_tb.i_dbg_top.RW \
+
+
+deselect all
+open window designbrowser 1 geometry 64 125 855 550
+open window waveform 1 geometry 14 67 1024 662
+zoom at 168762.05(0)ns 0.00005926 0.00000000
tags/old_debug/sim/rtl_sim/run/wave.do
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/out/dir_keeper
===================================================================
--- tags/old_debug/sim/rtl_sim/out/dir_keeper (nonexistent)
+++ tags/old_debug/sim/rtl_sim/out/dir_keeper (revision 78)
@@ -0,0 +1 @@
+Only keeper of empty directories
tags/old_debug/sim/rtl_sim/out/dir_keeper
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/bin/sim_file_list
===================================================================
--- tags/old_debug/sim/rtl_sim/bin/sim_file_list (nonexistent)
+++ tags/old_debug/sim/rtl_sim/bin/sim_file_list (revision 78)
@@ -0,0 +1,4 @@
+timescale.v
+dbg_tb_defines.v
+dbg_tb.v
+
tags/old_debug/sim/rtl_sim/bin/sim_file_list
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/bin/INCA_libs/worklib/dir_keeper
===================================================================
Index: tags/old_debug/sim/rtl_sim/bin/rtl_file_list
===================================================================
--- tags/old_debug/sim/rtl_sim/bin/rtl_file_list (nonexistent)
+++ tags/old_debug/sim/rtl_sim/bin/rtl_file_list (revision 78)
@@ -0,0 +1,11 @@
+dbg_defines.v
+dbg_register.v
+dbg_top.v
+jtag_chain.v
+timescale.v
+dbg_crc8_d1.v
+dbg_registers.v
+dbg_sync_clk1_clk2.v
+dbg_trace.v
+tap_top.v
+
tags/old_debug/sim/rtl_sim/bin/rtl_file_list
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/bin/cds.lib
===================================================================
--- tags/old_debug/sim/rtl_sim/bin/cds.lib (nonexistent)
+++ tags/old_debug/sim/rtl_sim/bin/cds.lib (revision 78)
@@ -0,0 +1,6 @@
+#
+# cds.lib: Defines the locations of compiled libraries.
+# Created by ncprep on Tue Jul 3 11:40:44 2001
+#
+
+define worklib ./INCA_libs/worklib
tags/old_debug/sim/rtl_sim/bin/cds.lib
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/sim/rtl_sim/bin/hdl.var
===================================================================
--- tags/old_debug/sim/rtl_sim/bin/hdl.var (nonexistent)
+++ tags/old_debug/sim/rtl_sim/bin/hdl.var (revision 78)
@@ -0,0 +1,9 @@
+#
+# hdl.var: Defines variables used by the INCA tools.
+# Created by ncprep on Tue Jul 3 11:40:44 2001
+#
+
+softinclude $CDS_INST_DIR/tools/inca/files/hdl.var
+
+define LIB_MAP ( $LIB_MAP, + => worklib )
+define VIEW_MAP ( $VIEW_MAP, .v => v)
tags/old_debug/sim/rtl_sim/bin/hdl.var
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: tags/old_debug/doc/DbgSupp.pdf
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/DbgSupp.pdf
===================================================================
--- tags/old_debug/doc/DbgSupp.pdf (nonexistent)
+++ tags/old_debug/doc/DbgSupp.pdf (revision 78)
tags/old_debug/doc/DbgSupp.pdf
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: tags/old_debug/doc/src/DbgSupp.doc
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/src/DbgSupp.doc
===================================================================
--- tags/old_debug/doc/src/DbgSupp.doc (nonexistent)
+++ tags/old_debug/doc/src/DbgSupp.doc (revision 78)
tags/old_debug/doc/src/DbgSupp.doc
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: tags/old_debug/doc/src/Debug Support Datasheet (prl.).doc
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/src/Debug Support Datasheet (prl.).doc
===================================================================
--- tags/old_debug/doc/src/Debug Support Datasheet (prl.).doc (nonexistent)
+++ tags/old_debug/doc/src/Debug Support Datasheet (prl.).doc (revision 78)
tags/old_debug/doc/src/Debug Support Datasheet (prl.).doc
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: tags/old_debug/doc/src/DbgSupp_PB.doc
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/src/DbgSupp_PB.doc
===================================================================
--- tags/old_debug/doc/src/DbgSupp_PB.doc (nonexistent)
+++ tags/old_debug/doc/src/DbgSupp_PB.doc (revision 78)
tags/old_debug/doc/src/DbgSupp_PB.doc
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: tags/old_debug/doc/Debug Support Datasheet (prl.).pdf
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/Debug Support Datasheet (prl.).pdf
===================================================================
--- tags/old_debug/doc/Debug Support Datasheet (prl.).pdf (nonexistent)
+++ tags/old_debug/doc/Debug Support Datasheet (prl.).pdf (revision 78)
tags/old_debug/doc/Debug Support Datasheet (prl.).pdf
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: tags/old_debug/doc/DbgSupp_PB.pdf
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: tags/old_debug/doc/DbgSupp_PB.pdf
===================================================================
--- tags/old_debug/doc/DbgSupp_PB.pdf (nonexistent)
+++ tags/old_debug/doc/DbgSupp_PB.pdf (revision 78)
tags/old_debug/doc/DbgSupp_PB.pdf
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property