URL
https://opencores.org/ocsvn/phr/phr/trunk
Subversion Repositories phr
Compare Revisions
- This comparison shows the changes necessary to convert path
/
- from Rev 77 to Rev 78
- ↔ Reverse comparison
Rev 77 → Rev 78
/phr/trunk/codigo/jtag/openocd/arm/out.log
1,240 → 1,185
Debug: 15 22 configuration.c:86 find_file(): found core.cfg |
Debug: 16 29 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_interface ft2232 |
Debug: 17 31 command.c:145 script_debug(): command - interface ocd_interface ft2232 |
Debug: 19 31 command.c:369 register_command_handler(): registering 'ocd_ft2232_device_desc'... |
Debug: 20 31 command.c:369 register_command_handler(): registering 'ocd_ft2232_serial'... |
Debug: 21 31 command.c:369 register_command_handler(): registering 'ocd_ft2232_layout'... |
Debug: 22 32 command.c:369 register_command_handler(): registering 'ocd_ft2232_vid_pid'... |
Debug: 23 32 command.c:369 register_command_handler(): registering 'ocd_ft2232_latency'... |
Info : 24 32 transport.c:118 allow_transports(): only one transport option; autoselect 'jtag' |
Debug: 25 32 command.c:369 register_command_handler(): registering 'ocd_jtag_flush_queue_sleep'... |
Debug: 26 32 command.c:369 register_command_handler(): registering 'ocd_jtag_rclk'... |
Debug: 27 32 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_delay'... |
Debug: 28 32 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'... |
Debug: 29 32 command.c:369 register_command_handler(): registering 'ocd_scan_chain'... |
Debug: 30 32 command.c:369 register_command_handler(): registering 'ocd_jtag_reset'... |
Debug: 31 32 command.c:369 register_command_handler(): registering 'ocd_runtest'... |
Debug: 32 32 command.c:369 register_command_handler(): registering 'ocd_irscan'... |
Debug: 33 32 command.c:369 register_command_handler(): registering 'ocd_verify_ircapture'... |
Debug: 34 32 command.c:369 register_command_handler(): registering 'ocd_verify_jtag'... |
Debug: 35 32 command.c:369 register_command_handler(): registering 'ocd_tms_sequence'... |
Debug: 36 32 command.c:369 register_command_handler(): registering 'ocd_wait_srst_deassert'... |
Debug: 37 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 38 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 39 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 40 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 41 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 42 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 43 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 44 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 45 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 46 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 47 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 48 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 49 32 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 50 32 command.c:369 register_command_handler(): registering 'ocd_svf'... |
Debug: 51 32 command.c:369 register_command_handler(): registering 'ocd_xsvf'... |
Debug: 52 32 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_device_desc |
Debug: 53 33 command.c:145 script_debug(): command - ft2232_device_desc ocd_ft2232_device_desc |
Error: 55 33 ft2232.c:3175 ft2232_handle_device_desc_command(): expected exactly one argument to ft2232_device_desc <description> |
Debug: 56 33 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_layout oocdlink |
Debug: 57 33 command.c:145 script_debug(): command - ft2232_layout ocd_ft2232_layout oocdlink |
Debug: 59 33 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_latency 10 |
Debug: 60 33 command.c:145 script_debug(): command - ft2232_latency ocd_ft2232_latency 10 |
Debug: 62 33 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 63 33 command.c:145 script_debug(): command - ft2232_vid_pid ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 65 33 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only |
Debug: 66 33 command.c:145 script_debug(): command - reset_config ocd_reset_config srst_only |
User : 68 33 command.c:549 command_print(): srst_only separate srst_gates_jtag srst_open_drain |
Debug: 69 33 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 10 |
Debug: 70 33 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 10 |
Debug: 72 33 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 73 33 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 74 33 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 75 33 command.c:549 command_print(): adapter speed: 10 kHz |
Debug: 76 58 configuration.c:86 find_file(): found /usr/local/share/openocd/scripts/target/lpc2124.cfg |
Debug: 77 64 configuration.c:86 find_file(): found /usr/local/share/openocd/scripts/target/lpc2xxx.cfg |
Debug: 78 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_gdb_memory_map enable |
Debug: 79 67 command.c:145 script_debug(): command - gdb_memory_map ocd_gdb_memory_map enable |
Debug: 81 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_gdb_flash_program enable |
Debug: 82 67 command.c:145 script_debug(): command - gdb_flash_program ocd_gdb_flash_program enable |
Debug: 84 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 85 67 command.c:145 script_debug(): command - init ocd_init |
Debug: 87 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target init |
Debug: 88 67 command.c:145 script_debug(): command - ocd_target ocd_target init |
Debug: 90 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_echo Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
Debug: 91 67 command.c:145 script_debug(): command - echo ocd_echo Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
User : 93 67 command.c:766 jim_echo(): Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
Debug: 94 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config trst_and_srst |
Debug: 95 67 command.c:145 script_debug(): command - reset_config ocd_reset_config trst_and_srst |
User : 97 67 command.c:549 command_print(): trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain |
Debug: 98 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_nsrst_delay 100 |
Debug: 99 67 command.c:145 script_debug(): command - adapter_nsrst_delay ocd_adapter_nsrst_delay 100 |
User : 101 67 command.c:549 command_print(): adapter_nsrst_delay: 100 |
Debug: 102 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag_ntrst_delay 100 |
Debug: 103 67 command.c:145 script_debug(): command - jtag_ntrst_delay ocd_jtag_ntrst_delay 100 |
User : 105 67 command.c:549 command_print(): jtag_ntrst_delay: 100 |
Debug: 106 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1500 |
Debug: 107 67 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1500 |
Debug: 109 67 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 110 67 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 111 67 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 112 67 command.c:549 command_print(): adapter speed: 1500 kHz |
Debug: 113 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag newtap lpc2124 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f |
Debug: 114 67 command.c:145 script_debug(): command - ocd_jtag ocd_jtag newtap lpc2124 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f |
Debug: 115 67 tcl.c:554 jim_newtap_cmd(): Creating New Tap, Chip: lpc2124, Tap: cpu, Dotted: lpc2124.cpu, 8 params |
Debug: 116 67 tcl.c:571 jim_newtap_cmd(): Processing option: -irlen |
Debug: 117 67 tcl.c:571 jim_newtap_cmd(): Processing option: -ircapture |
Debug: 118 67 tcl.c:571 jim_newtap_cmd(): Processing option: -irmask |
Debug: 119 67 tcl.c:571 jim_newtap_cmd(): Processing option: -expected-id |
Debug: 120 67 core.c:1323 jtag_tap_init(): Created Tap: lpc2124.cpu @ abs position 0, irlen 4, capture: 0x1 mask: 0xf |
Debug: 121 67 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target create lpc2124.cpu arm7tdmi -chain-position lpc2124.cpu |
Debug: 122 68 command.c:145 script_debug(): command - ocd_target ocd_target create lpc2124.cpu arm7tdmi -chain-position lpc2124.cpu |
Debug: 123 68 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 124 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 125 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 126 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 127 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 128 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 129 68 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 130 68 command.c:369 register_command_handler(): registering 'ocd_etm'... |
Debug: 131 68 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 132 68 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 133 68 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 134 80 armv4_5.c:395 arm_set_cpsr(): set CPSR 0x00000010: User mode, ARM state |
Debug: 135 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 136 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 137 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 138 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 139 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 140 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 141 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 142 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 143 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 144 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 145 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 146 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 147 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 148 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 149 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 150 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 151 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 152 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 153 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 154 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 155 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 156 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 157 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 158 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 159 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 160 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 161 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 162 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 163 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 164 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 165 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 166 80 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 167 80 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_lpc2124.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 |
Debug: 168 80 command.c:145 script_debug(): command - ocd_lpc2124.cpu ocd_lpc2124.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 |
Debug: 169 80 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 170 80 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 171 80 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 172 80 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash bank lpc2124.flash lpc2000 0x0 0x40000 0 0 lpc2124.cpu lpc2000_v1 12000 calc_checksum |
Debug: 173 80 command.c:145 script_debug(): command - ocd_flash ocd_flash bank lpc2124.flash lpc2000 0x0 0x40000 0 0 lpc2124.cpu lpc2000_v1 12000 calc_checksum |
Debug: 175 80 command.c:369 register_command_handler(): registering 'ocd_lpc2000'... |
Debug: 176 80 tcl.c:781 handle_flash_bank_command(): 'lpc2000' driver usage field missing |
Debug: 177 80 target.c:1183 handle_target_init_command(): Initializing targets... |
Debug: 178 80 command.c:369 register_command_handler(): registering 'ocd_target_request'... |
Debug: 179 80 command.c:369 register_command_handler(): registering 'ocd_trace'... |
Debug: 180 80 command.c:369 register_command_handler(): registering 'ocd_trace'... |
Debug: 181 81 command.c:369 register_command_handler(): registering 'ocd_fast_load_image'... |
Debug: 182 81 command.c:369 register_command_handler(): registering 'ocd_fast_load'... |
Debug: 183 81 command.c:369 register_command_handler(): registering 'ocd_profile'... |
Debug: 184 81 command.c:369 register_command_handler(): registering 'ocd_virt2phys'... |
Debug: 185 81 command.c:369 register_command_handler(): registering 'ocd_reg'... |
Debug: 186 81 command.c:369 register_command_handler(): registering 'ocd_poll'... |
Debug: 187 81 command.c:369 register_command_handler(): registering 'ocd_wait_halt'... |
Debug: 188 81 command.c:369 register_command_handler(): registering 'ocd_halt'... |
Debug: 189 81 command.c:369 register_command_handler(): registering 'ocd_resume'... |
Debug: 190 81 command.c:369 register_command_handler(): registering 'ocd_reset'... |
Debug: 191 81 command.c:369 register_command_handler(): registering 'ocd_soft_reset_halt'... |
Debug: 192 81 command.c:369 register_command_handler(): registering 'ocd_step'... |
Debug: 193 81 command.c:369 register_command_handler(): registering 'ocd_mdw'... |
Debug: 194 81 command.c:369 register_command_handler(): registering 'ocd_mdh'... |
Debug: 195 81 command.c:369 register_command_handler(): registering 'ocd_mdb'... |
Debug: 196 81 command.c:369 register_command_handler(): registering 'ocd_mww'... |
Debug: 197 81 command.c:369 register_command_handler(): registering 'ocd_mwh'... |
Debug: 198 81 command.c:369 register_command_handler(): registering 'ocd_mwb'... |
Debug: 199 81 command.c:369 register_command_handler(): registering 'ocd_bp'... |
Debug: 200 81 command.c:369 register_command_handler(): registering 'ocd_rbp'... |
Debug: 201 81 command.c:369 register_command_handler(): registering 'ocd_wp'... |
Debug: 202 81 command.c:369 register_command_handler(): registering 'ocd_rwp'... |
Debug: 203 81 command.c:369 register_command_handler(): registering 'ocd_load_image'... |
Debug: 204 81 command.c:369 register_command_handler(): registering 'ocd_dump_image'... |
Debug: 205 81 command.c:369 register_command_handler(): registering 'ocd_verify_image'... |
Debug: 206 81 command.c:369 register_command_handler(): registering 'ocd_test_image'... |
Debug: 207 81 command.c:369 register_command_handler(): registering 'ocd_reset_nag'... |
Debug: 208 81 command.c:369 register_command_handler(): registering 'ocd_ps'... |
Debug: 209 81 ft2232.c:2337 ft2232_init(): ft2232 interface using shortest path jtag state transitions |
Debug: 210 81 ft2232.c:2224 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'oocdlink' layout (0403:6001) |
Debug: 211 341 ft2232.c:2263 ft2232_init_libftdi(): current latency timer: 10 |
Debug: 212 342 ft2232.c:2274 ft2232_init_libftdi(): FTDI chip type: 2 "2232C" |
Debug: 213 342 ft2232.c:2299 ft2232_set_data_bits_low_byte(): 80 08 1b |
Debug: 214 343 ft2232.c:2318 ft2232_set_data_bits_high_byte(): 82 06 0f |
Debug: 215 347 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 216 347 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 217 347 ft2232.c:683 ft2232_speed(): 86 03 00 |
Debug: 218 348 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 219 348 core.c:1595 adapter_khz_to_speed(): have interface set up |
Info : 220 348 core.c:1399 adapter_init(): clock speed 1500 kHz |
Debug: 221 348 openocd.c:132 handle_init_command(): Debug Adapter init complete |
Debug: 222 348 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_transport init |
Debug: 223 348 command.c:145 script_debug(): command - ocd_transport ocd_transport init |
Debug: 225 348 transport.c:240 handle_transport_init(): handle_transport_init |
Debug: 226 348 ft2232.c:1394 jtagkey_reset(): trst: 0, srst: 0, high_output: 0x06, high_direction: 0x0f |
Debug: 227 349 core.c:719 jtag_add_reset(): SRST line released |
Debug: 228 349 core.c:743 jtag_add_reset(): TRST line released |
Debug: 229 349 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 231 553 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag arp_init |
Debug: 232 553 command.c:145 script_debug(): command - ocd_jtag ocd_jtag arp_init |
Debug: 233 553 core.c:1412 jtag_init_inner(): Init JTAG chain |
Debug: 234 553 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 235 555 core.c:1048 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS |
Debug: 236 555 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Info : 237 567 core.c:951 jtag_examine_chain_display(): JTAG tap: lpc2124.cpu tap/device found: 0x4f1f0f0f (mfg: 0x787, part: 0xf1f0, ver: 0x4) |
Debug: 238 567 core.c:1208 jtag_validate_ircapture(): IR capture validation scan |
Debug: 239 577 core.c:1267 jtag_validate_ircapture(): lpc2124.cpu: IR capture 0x01 |
Debug: 240 577 openocd.c:145 handle_init_command(): Examining targets... |
Debug: 241 577 target.c:1299 target_call_event_callbacks(): target event 21 (examine-start) |
Info : 242 587 embeddedice.c:231 embeddedice_build_reg_cache(): Embedded ICE version 4 |
Info : 243 587 embeddedice.c:302 embeddedice_build_reg_cache(): lpc2124.cpu: hardware has 2 breakpoint/watchpoint units |
Debug: 244 597 embeddedice.c:501 embeddedice_write_reg(): 0: 0x00000000 |
Debug: 245 598 arm7_9_common.c:75 arm7_9_clear_watchpoints(): - |
Debug: 246 598 embeddedice.c:501 embeddedice_write_reg(): 12: 0x00000000 |
Debug: 247 598 embeddedice.c:501 embeddedice_write_reg(): 20: 0x00000000 |
Debug: 248 599 target.c:1299 target_call_event_callbacks(): target event 22 (examine-end) |
Debug: 249 599 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash init |
Debug: 250 599 command.c:145 script_debug(): command - ocd_flash ocd_flash init |
Debug: 252 607 tcl.c:847 handle_flash_init_command(): Initializing flash devices... |
Debug: 253 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 254 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 255 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 256 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 257 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 258 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 259 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 260 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 261 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 262 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 263 607 command.c:369 register_command_handler(): registering 'ocd_flash'... |
Debug: 264 607 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_mflash init |
Debug: 265 607 command.c:145 script_debug(): command - ocd_mflash ocd_mflash init |
Debug: 267 617 mflash.c:1379 handle_mflash_init_command(): Initializing mflash devices... |
Debug: 268 617 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_nand init |
Debug: 269 617 command.c:145 script_debug(): command - ocd_nand ocd_nand init |
Debug: 271 627 tcl.c:497 handle_nand_init_command(): Initializing NAND devices... |
Debug: 272 627 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_pld init |
Debug: 273 627 command.c:145 script_debug(): command - ocd_pld ocd_pld init |
Debug: 275 639 pld.c:207 handle_pld_init_command(): Initializing PLDs... |
Debug: 276 639 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 277 639 command.c:145 script_debug(): command - init ocd_init |
Debug: 15 34 configuration.c:86 find_file(): found core.cfg |
Debug: 16 37 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_interface ft2232 |
Debug: 17 37 command.c:145 script_debug(): command - interface ocd_interface ft2232 |
Debug: 19 37 command.c:369 register_command_handler(): registering 'ocd_ft2232_device_desc'... |
Debug: 20 37 command.c:369 register_command_handler(): registering 'ocd_ft2232_serial'... |
Debug: 21 37 command.c:369 register_command_handler(): registering 'ocd_ft2232_layout'... |
Debug: 22 37 command.c:369 register_command_handler(): registering 'ocd_ft2232_vid_pid'... |
Debug: 23 37 command.c:369 register_command_handler(): registering 'ocd_ft2232_latency'... |
Info : 24 37 transport.c:118 allow_transports(): only one transport option; autoselect 'jtag' |
Debug: 25 37 command.c:369 register_command_handler(): registering 'ocd_jtag_flush_queue_sleep'... |
Debug: 26 37 command.c:369 register_command_handler(): registering 'ocd_jtag_rclk'... |
Debug: 27 37 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_delay'... |
Debug: 28 37 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'... |
Debug: 29 37 command.c:369 register_command_handler(): registering 'ocd_scan_chain'... |
Debug: 30 37 command.c:369 register_command_handler(): registering 'ocd_jtag_reset'... |
Debug: 31 37 command.c:369 register_command_handler(): registering 'ocd_runtest'... |
Debug: 32 37 command.c:369 register_command_handler(): registering 'ocd_irscan'... |
Debug: 33 37 command.c:369 register_command_handler(): registering 'ocd_verify_ircapture'... |
Debug: 34 37 command.c:369 register_command_handler(): registering 'ocd_verify_jtag'... |
Debug: 35 37 command.c:369 register_command_handler(): registering 'ocd_tms_sequence'... |
Debug: 36 38 command.c:369 register_command_handler(): registering 'ocd_wait_srst_deassert'... |
Debug: 37 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 38 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 39 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 40 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 41 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 42 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 43 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 44 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 45 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 46 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 47 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 48 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 49 38 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 50 38 command.c:369 register_command_handler(): registering 'ocd_svf'... |
Debug: 51 38 command.c:369 register_command_handler(): registering 'ocd_xsvf'... |
Debug: 52 38 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_device_desc |
Debug: 53 38 command.c:145 script_debug(): command - ft2232_device_desc ocd_ft2232_device_desc |
Error: 55 38 ft2232.c:3175 ft2232_handle_device_desc_command(): expected exactly one argument to ft2232_device_desc <description> |
Debug: 56 39 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_layout oocdlink |
Debug: 57 39 command.c:145 script_debug(): command - ft2232_layout ocd_ft2232_layout oocdlink |
Debug: 59 39 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_latency 10 |
Debug: 60 39 command.c:145 script_debug(): command - ft2232_latency ocd_ft2232_latency 10 |
Debug: 62 39 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 63 39 command.c:145 script_debug(): command - ft2232_vid_pid ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 65 39 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only |
Debug: 66 39 command.c:145 script_debug(): command - reset_config ocd_reset_config srst_only |
User : 68 39 command.c:549 command_print(): srst_only separate srst_gates_jtag srst_open_drain |
Debug: 69 39 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 10 |
Debug: 70 39 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 10 |
Debug: 72 39 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 73 39 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 74 39 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 75 39 command.c:549 command_print(): adapter speed: 10 kHz |
Debug: 76 63 configuration.c:86 find_file(): found /usr/local/share/openocd/scripts/target/lpc2124.cfg |
Debug: 77 68 configuration.c:86 find_file(): found /usr/local/share/openocd/scripts/target/lpc2xxx.cfg |
Debug: 78 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_gdb_memory_map enable |
Debug: 79 71 command.c:145 script_debug(): command - gdb_memory_map ocd_gdb_memory_map enable |
Debug: 81 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_gdb_flash_program enable |
Debug: 82 71 command.c:145 script_debug(): command - gdb_flash_program ocd_gdb_flash_program enable |
Debug: 84 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 85 71 command.c:145 script_debug(): command - init ocd_init |
Debug: 87 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target init |
Debug: 88 71 command.c:145 script_debug(): command - ocd_target ocd_target init |
Debug: 90 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_echo Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
Debug: 91 71 command.c:145 script_debug(): command - echo ocd_echo Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
User : 93 71 command.c:766 jim_echo(): Warning - assuming default core clock 12MHz! Flashing may fail if actual core clock is different. |
Debug: 94 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config trst_and_srst |
Debug: 95 71 command.c:145 script_debug(): command - reset_config ocd_reset_config trst_and_srst |
User : 97 71 command.c:549 command_print(): trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain |
Debug: 98 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_nsrst_delay 100 |
Debug: 99 71 command.c:145 script_debug(): command - adapter_nsrst_delay ocd_adapter_nsrst_delay 100 |
User : 101 71 command.c:549 command_print(): adapter_nsrst_delay: 100 |
Debug: 102 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag_ntrst_delay 100 |
Debug: 103 71 command.c:145 script_debug(): command - jtag_ntrst_delay ocd_jtag_ntrst_delay 100 |
User : 105 71 command.c:549 command_print(): jtag_ntrst_delay: 100 |
Debug: 106 71 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1500 |
Debug: 107 71 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1500 |
Debug: 109 71 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 110 71 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 111 71 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 112 71 command.c:549 command_print(): adapter speed: 1500 kHz |
Debug: 113 72 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag newtap lpc2124 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f |
Debug: 114 72 command.c:145 script_debug(): command - ocd_jtag ocd_jtag newtap lpc2124 cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id 0x4f1f0f0f |
Debug: 115 72 tcl.c:554 jim_newtap_cmd(): Creating New Tap, Chip: lpc2124, Tap: cpu, Dotted: lpc2124.cpu, 8 params |
Debug: 116 72 tcl.c:571 jim_newtap_cmd(): Processing option: -irlen |
Debug: 117 72 tcl.c:571 jim_newtap_cmd(): Processing option: -ircapture |
Debug: 118 72 tcl.c:571 jim_newtap_cmd(): Processing option: -irmask |
Debug: 119 72 tcl.c:571 jim_newtap_cmd(): Processing option: -expected-id |
Debug: 120 72 core.c:1323 jtag_tap_init(): Created Tap: lpc2124.cpu @ abs position 0, irlen 4, capture: 0x1 mask: 0xf |
Debug: 121 72 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target create lpc2124.cpu arm7tdmi -chain-position lpc2124.cpu |
Debug: 122 72 command.c:145 script_debug(): command - ocd_target ocd_target create lpc2124.cpu arm7tdmi -chain-position lpc2124.cpu |
Debug: 123 72 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 124 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 125 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 126 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 127 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 128 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 129 72 command.c:369 register_command_handler(): registering 'ocd_arm'... |
Debug: 130 72 command.c:369 register_command_handler(): registering 'ocd_etm'... |
Debug: 131 72 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 132 72 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 133 72 command.c:369 register_command_handler(): registering 'ocd_arm7_9'... |
Debug: 134 95 armv4_5.c:395 arm_set_cpsr(): set CPSR 0x00000010: User mode, ARM state |
Debug: 135 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 136 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 137 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 138 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 139 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 140 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 141 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 142 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 143 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 144 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 145 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 146 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 147 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 148 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 149 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 150 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 151 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 152 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 153 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 154 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 155 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 156 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 157 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 158 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 159 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 160 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 161 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 162 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 163 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 164 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 165 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 166 95 command.c:369 register_command_handler(): registering 'ocd_lpc2124.cpu'... |
Debug: 167 95 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_lpc2124.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 |
Debug: 168 95 command.c:145 script_debug(): command - ocd_lpc2124.cpu ocd_lpc2124.cpu configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 |
Debug: 169 95 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 170 95 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 171 95 target.c:1620 target_free_all_working_areas_restore(): freeing all working areas |
Debug: 172 95 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash bank lpc2124.flash lpc2000 0x0 0x40000 0 0 lpc2124.cpu lpc2000_v1 12000 calc_checksum |
Debug: 173 95 command.c:145 script_debug(): command - ocd_flash ocd_flash bank lpc2124.flash lpc2000 0x0 0x40000 0 0 lpc2124.cpu lpc2000_v1 12000 calc_checksum |
Debug: 175 95 command.c:369 register_command_handler(): registering 'ocd_lpc2000'... |
Debug: 176 95 tcl.c:781 handle_flash_bank_command(): 'lpc2000' driver usage field missing |
Debug: 177 95 target.c:1183 handle_target_init_command(): Initializing targets... |
Debug: 178 96 command.c:369 register_command_handler(): registering 'ocd_target_request'... |
Debug: 179 96 command.c:369 register_command_handler(): registering 'ocd_trace'... |
Debug: 180 96 command.c:369 register_command_handler(): registering 'ocd_trace'... |
Debug: 181 96 command.c:369 register_command_handler(): registering 'ocd_fast_load_image'... |
Debug: 182 96 command.c:369 register_command_handler(): registering 'ocd_fast_load'... |
Debug: 183 96 command.c:369 register_command_handler(): registering 'ocd_profile'... |
Debug: 184 96 command.c:369 register_command_handler(): registering 'ocd_virt2phys'... |
Debug: 185 96 command.c:369 register_command_handler(): registering 'ocd_reg'... |
Debug: 186 96 command.c:369 register_command_handler(): registering 'ocd_poll'... |
Debug: 187 96 command.c:369 register_command_handler(): registering 'ocd_wait_halt'... |
Debug: 188 96 command.c:369 register_command_handler(): registering 'ocd_halt'... |
Debug: 189 96 command.c:369 register_command_handler(): registering 'ocd_resume'... |
Debug: 190 96 command.c:369 register_command_handler(): registering 'ocd_reset'... |
Debug: 191 96 command.c:369 register_command_handler(): registering 'ocd_soft_reset_halt'... |
Debug: 192 96 command.c:369 register_command_handler(): registering 'ocd_step'... |
Debug: 193 96 command.c:369 register_command_handler(): registering 'ocd_mdw'... |
Debug: 194 96 command.c:369 register_command_handler(): registering 'ocd_mdh'... |
Debug: 195 96 command.c:369 register_command_handler(): registering 'ocd_mdb'... |
Debug: 196 96 command.c:369 register_command_handler(): registering 'ocd_mww'... |
Debug: 197 96 command.c:369 register_command_handler(): registering 'ocd_mwh'... |
Debug: 198 96 command.c:369 register_command_handler(): registering 'ocd_mwb'... |
Debug: 199 96 command.c:369 register_command_handler(): registering 'ocd_bp'... |
Debug: 200 96 command.c:369 register_command_handler(): registering 'ocd_rbp'... |
Debug: 201 96 command.c:369 register_command_handler(): registering 'ocd_wp'... |
Debug: 202 96 command.c:369 register_command_handler(): registering 'ocd_rwp'... |
Debug: 203 96 command.c:369 register_command_handler(): registering 'ocd_load_image'... |
Debug: 204 96 command.c:369 register_command_handler(): registering 'ocd_dump_image'... |
Debug: 205 96 command.c:369 register_command_handler(): registering 'ocd_verify_image'... |
Debug: 206 96 command.c:369 register_command_handler(): registering 'ocd_test_image'... |
Debug: 207 96 command.c:369 register_command_handler(): registering 'ocd_reset_nag'... |
Debug: 208 96 command.c:369 register_command_handler(): registering 'ocd_ps'... |
Debug: 209 96 ft2232.c:2337 ft2232_init(): ft2232 interface using shortest path jtag state transitions |
Debug: 210 96 ft2232.c:2224 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'oocdlink' layout (0403:6001) |
Error: 211 359 ft2232.c:2243 ft2232_init_libftdi(): unable to open ftdi device: device not found |
Debug: 212 359 command.c:631 run_command(): Command failed with error code -100 |
User : 213 359 command.c:669 command_run_line(): Runtime Error: openocd.cfg:30: |
in procedure 'script' |
at file "embedded:startup.tcl", line 58 |
in procedure 'init' called at file "openocd.cfg", line 30 |
/phr/trunk/codigo/jtag/openocd/test/test.svf
32,3 → 32,6
HIR 0 ; |
TDR 0 ; |
HDR 0 ; |
|
|
|
/phr/trunk/codigo/jtag/openocd/cpld/cpld.cfg
0,0 → 1,29
#LPC-2124 CPU |
|
if { [info exists CHIPNAME] } { |
set _CHIPNAME $CHIPNAME |
} else { |
set _CHIPNAME cpld |
} |
|
if { [info exists CPUTAPID ] } { |
set _CPUTAPID $CPUTAPID |
} else { |
# force an error till we get a good number |
set _CPUTAPID 0xff541053 |
} |
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately |
reset_config trst_and_srst srst_pulls_trst |
|
# reset delays |
jtag_nsrst_delay 100 |
jtag_ntrst_delay 100 |
|
jtag_khz 10 |
|
#jtag scan chain |
jtag newtap $_CHIPNAME tap -irlen 8 -ircapture 0x1 -irmask 0x3 -expected-id $_CPUTAPID |
|
|
/phr/trunk/codigo/jtag/openocd/cpld/openocd.cfg~
0,0 → 1,30
# OpenOCD configuration script |
# 2013-03-25 lguanuco |
# Hardware: |
# - OOCD-Link-s |
|
# ("3": max. verbosity level) |
debug_level 3 |
# (set log file) |
log_output out.log |
|
# ----------------------- |
# 1. Dongle configuration |
# |
source [find core.cfg] |
|
# --------------------------------- |
# 2. Target processor configuration |
|
source [find target/lpc2124.cfg] |
|
# --------------------------------- |
# 3. Other configs |
# |
# Backup: remember default values |
#telnet_port 4444 |
#gdb_port 3333 |
|
gdb_memory_map enable |
gdb_flash_program enable |
init |
/phr/trunk/codigo/jtag/openocd/cpld/openocd.cfg
0,0 → 1,28
# OpenOCD configuration script |
# 2013-03-25 lguanuco |
# Hardware: |
# - OOCD-Link-s |
|
# ("3": max. verbosity level) |
debug_level 3 |
# (set log file) |
log_output out.log |
|
# ----------------------- |
# 1. Dongle configuration |
# |
source [find core.cfg] |
|
# --------------------------------- |
# 2. Target processor configuration |
|
source [find cpld.cfg] |
|
# --------------------------------- |
# 3. Other configs |
# |
# Backup: remember default values |
#telnet_port 4444 |
#gdb_port 3333 |
|
init |
/phr/trunk/codigo/jtag/openocd/cpld/core.cfg
0,0 → 1,8
# |
interface ft2232 |
ft2232_device_desc |
ft2232_layout oocdlink |
ft2232_latency 10 |
ft2232_vid_pid 0x0403 0x6001 |
reset_config srst_only |
adapter_khz 10 |
/phr/trunk/codigo/jtag/openocd/cpld/out.log
0,0 → 1,1550
Debug: 15 3 configuration.c:86 find_file(): found core.cfg |
Debug: 16 4 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_interface ft2232 |
Debug: 17 8 command.c:145 script_debug(): command - interface ocd_interface ft2232 |
Debug: 19 11 command.c:369 register_command_handler(): registering 'ocd_ft2232_device_desc'... |
Debug: 20 11 command.c:369 register_command_handler(): registering 'ocd_ft2232_serial'... |
Debug: 21 11 command.c:369 register_command_handler(): registering 'ocd_ft2232_layout'... |
Debug: 22 11 command.c:369 register_command_handler(): registering 'ocd_ft2232_vid_pid'... |
Debug: 23 12 command.c:369 register_command_handler(): registering 'ocd_ft2232_latency'... |
Info : 24 12 transport.c:118 allow_transports(): only one transport option; autoselect 'jtag' |
Debug: 25 12 command.c:369 register_command_handler(): registering 'ocd_jtag_flush_queue_sleep'... |
Debug: 26 12 command.c:369 register_command_handler(): registering 'ocd_jtag_rclk'... |
Debug: 27 12 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_delay'... |
Debug: 28 12 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'... |
Debug: 29 12 command.c:369 register_command_handler(): registering 'ocd_scan_chain'... |
Debug: 30 12 command.c:369 register_command_handler(): registering 'ocd_jtag_reset'... |
Debug: 31 12 command.c:369 register_command_handler(): registering 'ocd_runtest'... |
Debug: 32 12 command.c:369 register_command_handler(): registering 'ocd_irscan'... |
Debug: 33 12 command.c:369 register_command_handler(): registering 'ocd_verify_ircapture'... |
Debug: 34 12 command.c:369 register_command_handler(): registering 'ocd_verify_jtag'... |
Debug: 35 12 command.c:369 register_command_handler(): registering 'ocd_tms_sequence'... |
Debug: 36 12 command.c:369 register_command_handler(): registering 'ocd_wait_srst_deassert'... |
Debug: 37 12 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 38 12 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 39 12 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 40 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 41 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 42 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 43 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 44 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 45 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 46 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 47 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 48 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 49 13 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 50 13 command.c:369 register_command_handler(): registering 'ocd_svf'... |
Debug: 51 13 command.c:369 register_command_handler(): registering 'ocd_xsvf'... |
Debug: 52 13 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_device_desc |
Debug: 53 13 command.c:145 script_debug(): command - ft2232_device_desc ocd_ft2232_device_desc |
Error: 55 13 ft2232.c:3175 ft2232_handle_device_desc_command(): expected exactly one argument to ft2232_device_desc <description> |
Debug: 56 13 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_layout oocdlink |
Debug: 57 13 command.c:145 script_debug(): command - ft2232_layout ocd_ft2232_layout oocdlink |
Debug: 59 14 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_latency 10 |
Debug: 60 14 command.c:145 script_debug(): command - ft2232_latency ocd_ft2232_latency 10 |
Debug: 62 14 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 63 14 command.c:145 script_debug(): command - ft2232_vid_pid ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 65 14 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only |
Debug: 66 14 command.c:145 script_debug(): command - reset_config ocd_reset_config srst_only |
User : 68 14 command.c:549 command_print(): srst_only separate srst_gates_jtag srst_open_drain |
Debug: 69 14 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 10 |
Debug: 70 14 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 10 |
Debug: 72 14 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 73 14 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 74 14 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 75 14 command.c:549 command_print(): adapter speed: 10 kHz |
Debug: 76 14 configuration.c:86 find_file(): found cpld.cfg |
Debug: 77 14 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config trst_and_srst srst_pulls_trst |
Debug: 78 15 command.c:145 script_debug(): command - reset_config ocd_reset_config trst_and_srst srst_pulls_trst |
User : 80 15 command.c:549 command_print(): trst_and_srst srst_pulls_trst srst_gates_jtag trst_push_pull srst_open_drain |
Debug: 81 15 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_echo DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay' |
Debug: 82 15 command.c:145 script_debug(): command - echo ocd_echo DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay' |
User : 84 15 command.c:766 jim_echo(): DEPRECATED! use 'adapter_nsrst_delay' not 'jtag_nsrst_delay' |
Debug: 85 15 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_nsrst_delay 100 |
Debug: 86 15 command.c:145 script_debug(): command - adapter_nsrst_delay ocd_adapter_nsrst_delay 100 |
User : 88 15 command.c:549 command_print(): adapter_nsrst_delay: 100 |
Debug: 89 24 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag_ntrst_delay 100 |
Debug: 90 24 command.c:145 script_debug(): command - jtag_ntrst_delay ocd_jtag_ntrst_delay 100 |
User : 92 24 command.c:549 command_print(): jtag_ntrst_delay: 100 |
Debug: 93 24 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_echo DEPRECATED! use 'adapter_khz' not 'jtag_khz' |
Debug: 94 24 command.c:145 script_debug(): command - echo ocd_echo DEPRECATED! use 'adapter_khz' not 'jtag_khz' |
User : 96 24 command.c:766 jim_echo(): DEPRECATED! use 'adapter_khz' not 'jtag_khz' |
Debug: 97 24 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 10 |
Debug: 98 24 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 10 |
Debug: 100 24 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 101 24 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 102 25 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 103 25 command.c:549 command_print(): adapter speed: 10 kHz |
Debug: 104 25 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag newtap cpld tap -irlen 8 -ircapture 0x1 -irmask 0x3 -expected-id 0xff541053 |
Debug: 105 25 command.c:145 script_debug(): command - ocd_jtag ocd_jtag newtap cpld tap -irlen 8 -ircapture 0x1 -irmask 0x3 -expected-id 0xff541053 |
Debug: 106 25 tcl.c:554 jim_newtap_cmd(): Creating New Tap, Chip: cpld, Tap: tap, Dotted: cpld.tap, 8 params |
Debug: 107 25 tcl.c:571 jim_newtap_cmd(): Processing option: -irlen |
Debug: 108 25 tcl.c:571 jim_newtap_cmd(): Processing option: -ircapture |
Debug: 109 25 tcl.c:571 jim_newtap_cmd(): Processing option: -irmask |
Debug: 110 25 tcl.c:571 jim_newtap_cmd(): Processing option: -expected-id |
Debug: 111 25 core.c:1323 jtag_tap_init(): Created Tap: cpld.tap @ abs position 0, irlen 8, capture: 0x1 mask: 0x3 |
Debug: 112 25 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 113 25 command.c:145 script_debug(): command - init ocd_init |
Debug: 115 25 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target init |
Debug: 116 25 command.c:145 script_debug(): command - ocd_target ocd_target init |
Debug: 118 25 target.c:1183 handle_target_init_command(): Initializing targets... |
Debug: 119 25 ft2232.c:2337 ft2232_init(): ft2232 interface using shortest path jtag state transitions |
Debug: 120 26 ft2232.c:2224 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'oocdlink' layout (0403:6001) |
Debug: 121 235 ft2232.c:2263 ft2232_init_libftdi(): current latency timer: 10 |
Debug: 122 236 ft2232.c:2274 ft2232_init_libftdi(): FTDI chip type: 2 "2232C" |
Debug: 123 236 ft2232.c:2299 ft2232_set_data_bits_low_byte(): 80 08 1b |
Debug: 124 237 ft2232.c:2318 ft2232_set_data_bits_high_byte(): 82 06 0f |
Debug: 125 244 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 126 244 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 127 244 ft2232.c:683 ft2232_speed(): 86 57 02 |
Debug: 128 245 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 129 245 core.c:1595 adapter_khz_to_speed(): have interface set up |
Info : 130 245 core.c:1399 adapter_init(): clock speed 10 kHz |
Debug: 131 245 openocd.c:132 handle_init_command(): Debug Adapter init complete |
Debug: 132 245 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_transport init |
Debug: 133 245 command.c:145 script_debug(): command - ocd_transport ocd_transport init |
Debug: 135 245 transport.c:240 handle_transport_init(): handle_transport_init |
Debug: 136 245 ft2232.c:1394 jtagkey_reset(): trst: 0, srst: 0, high_output: 0x06, high_direction: 0x0f |
Debug: 137 246 core.c:719 jtag_add_reset(): SRST line released |
Debug: 138 246 core.c:743 jtag_add_reset(): TRST line released |
Debug: 139 246 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 140 448 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag arp_init |
Debug: 141 448 command.c:145 script_debug(): command - ocd_jtag ocd_jtag arp_init |
Debug: 142 448 core.c:1412 jtag_init_inner(): Init JTAG chain |
Debug: 143 448 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 144 451 core.c:1048 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS |
Debug: 145 451 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Info : 146 522 core.c:951 jtag_examine_chain_display(): JTAG tap: cpld.tap tap/device found: 0xff541053 (mfg: 0x029, part: 0xf541, ver: 0xf) |
Debug: 147 522 core.c:1208 jtag_validate_ircapture(): IR capture validation scan |
Debug: 148 532 core.c:1267 jtag_validate_ircapture(): cpld.tap: IR capture 0x1 |
Debug: 149 532 openocd.c:145 handle_init_command(): Examining targets... |
Debug: 150 532 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash init |
Debug: 151 532 command.c:145 script_debug(): command - ocd_flash ocd_flash init |
Debug: 154 532 tcl.c:847 handle_flash_init_command(): Initializing flash devices... |
Debug: 155 532 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_mflash init |
Debug: 156 532 command.c:145 script_debug(): command - ocd_mflash ocd_mflash init |
Debug: 158 532 mflash.c:1379 handle_mflash_init_command(): Initializing mflash devices... |
Debug: 159 532 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_nand init |
Debug: 160 532 command.c:145 script_debug(): command - ocd_nand ocd_nand init |
Debug: 162 532 tcl.c:497 handle_nand_init_command(): Initializing NAND devices... |
Debug: 163 532 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_pld init |
Debug: 164 532 command.c:145 script_debug(): command - ocd_pld ocd_pld init |
Debug: 166 532 pld.c:207 handle_pld_init_command(): Initializing PLDs... |
Warn : 167 532 gdb_server.c:2311 gdb_target_add_all(): gdb services need one or more targets defined |
Debug: 168 532 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 169 532 command.c:145 script_debug(): command - init ocd_init |
Info : 171 8406 server.c:83 add_connection(): accepting 'telnet' connection from 4444 |
Debug: 172 14211 telnet_server.c:363 telnet_input(): unhandled nonprintable: 01 |
Debug: 173 14287 telnet_server.c:363 telnet_input(): unhandled nonprintable: 0b |
Debug: 174 19974 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_scan_chain |
Debug: 175 19975 command.c:145 script_debug(): command - scan_chain ocd_scan_chain |
User : 177 19975 command.c:549 command_print(): TapName Enabled IdCode Expected IrLen IrCap IrMask |
User : 178 19975 command.c:549 command_print(): -- ------------------- -------- ---------- ---------- ----- ----- ------ |
User : 179 19975 command.c:549 command_print(): 0 cpld.tap Y 0xff541053 0xff541053 8 0x01 0x03 |
Debug: 180 23987 telnet_server.c:363 telnet_input(): unhandled nonprintable: 09 |
Debug: 181 31680 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 182 31680 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 184 31680 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 185 31680 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 186 31680 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 187 31680 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 188 31680 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 189 31687 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 190 31687 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 192 31687 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 193 31687 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 194 31688 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 195 31688 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 196 31689 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 197 31689 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 198 31689 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 199 31689 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 200 31689 svf.c:1002 svf_run_command(): length = 8 |
Debug: 201 31689 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 202 31689 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 203 31700 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 204 31700 svf.c:1002 svf_run_command(): length = 32 |
Debug: 205 31700 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 206 31700 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 207 31700 svf.c:1039 svf_run_command(): TDO = 0xFF541053 |
Debug: 208 31700 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Error: 209 31710 svf.c:839 svf_check_tdo(): tdo check error at line 21 |
Error: 210 31710 svf.c:843 svf_check_tdo(): read = 0x1541053, want = 0xFF541053, mask = 0xFFFFFFF |
Error: 211 31710 svf.c:484 handle_svf_command(): fail to run command at line 21 |
Error: 212 31710 svf.c:839 svf_check_tdo(): tdo check error at line 21 |
Error: 213 31710 svf.c:843 svf_check_tdo(): read = 0x1541053, want = 0xFF541053, mask = 0xFFFFFFF |
User : 214 31710 command.c:549 command_print(): |
Time used: 0m0s30ms |
User : 215 31710 command.c:549 command_print(): svf file programmed failed |
Debug: 216 31710 command.c:631 run_command(): Command failed with error code -4 |
User : 217 31710 command.c:669 command_run_line(): in procedure 'svf' |
Debug: 218 50063 telnet_server.c:363 telnet_input(): unhandled nonprintable: 0c |
Debug: 219 50619 telnet_server.c:363 telnet_input(): unhandled nonprintable: 10 |
Debug: 220 51875 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 221 51875 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 223 51875 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 224 51875 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 225 51875 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 226 51875 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 227 51875 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 228 51882 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 229 51882 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 231 51882 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 232 51882 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 233 51882 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 234 51882 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 235 51884 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 236 51884 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 237 51884 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 238 51884 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 239 51884 svf.c:1002 svf_run_command(): length = 8 |
Debug: 240 51884 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 241 51884 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 242 51898 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 243 51898 svf.c:1002 svf_run_command(): length = 32 |
Debug: 244 51898 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 245 51898 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 246 51898 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 247 51898 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 248 51905 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 249 51905 svf.c:1002 svf_run_command(): length = 8 |
Debug: 250 51905 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 251 51905 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 252 51905 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 253 51915 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 254 51915 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 255 51915 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 256 53380 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 257 53380 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 259 53381 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 260 53381 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 261 53381 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 262 53381 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 263 53381 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 264 53391 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 265 53391 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 267 53391 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 268 53391 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 269 53391 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 270 53391 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 271 53393 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 272 53393 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 273 53393 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 274 53393 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 275 53393 svf.c:1002 svf_run_command(): length = 8 |
Debug: 276 53393 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 277 53393 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 278 53404 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 279 53404 svf.c:1002 svf_run_command(): length = 32 |
Debug: 280 53404 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 281 53404 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 282 53404 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 283 53404 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 284 53414 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 285 53414 svf.c:1002 svf_run_command(): length = 8 |
Debug: 286 53414 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 287 53414 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 288 53414 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 289 53424 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 290 53424 command.c:549 command_print(): |
Time used: 0m0s43ms |
User : 291 53424 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 292 54271 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 293 54271 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 295 54271 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 296 54271 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 297 54271 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 298 54271 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 299 54271 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 300 54274 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 301 54274 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 303 54274 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 304 54274 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 305 54274 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 306 54274 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 307 54276 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 308 54276 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 309 54276 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 310 54276 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 311 54276 svf.c:1002 svf_run_command(): length = 8 |
Debug: 312 54276 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 313 54276 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 314 54288 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 315 54288 svf.c:1002 svf_run_command(): length = 32 |
Debug: 316 54288 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 317 54288 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 318 54288 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 319 54288 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 320 54298 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 321 54298 svf.c:1002 svf_run_command(): length = 8 |
Debug: 322 54298 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 323 54298 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 324 54298 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 325 54308 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 326 54308 command.c:549 command_print(): |
Time used: 0m0s37ms |
User : 327 54308 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 328 54682 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 329 54683 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 331 54683 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 332 54683 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 333 54683 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 334 54683 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 335 54683 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 336 54686 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 337 54686 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 339 54686 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 340 54686 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 341 54686 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 342 54686 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 343 54688 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 344 54688 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 345 54688 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 346 54688 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 347 54688 svf.c:1002 svf_run_command(): length = 8 |
Debug: 348 54688 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 349 54688 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 350 54699 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 351 54699 svf.c:1002 svf_run_command(): length = 32 |
Debug: 352 54699 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 353 54699 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 354 54699 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 355 54699 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 356 54709 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 357 54709 svf.c:1002 svf_run_command(): length = 8 |
Debug: 358 54709 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 359 54709 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 360 54709 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 361 54719 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 362 54719 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 363 54719 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 364 55099 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 365 55100 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 367 55100 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 368 55100 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 369 55100 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 370 55100 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 371 55100 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 372 55103 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 373 55103 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 375 55103 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 376 55103 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 377 55103 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 378 55103 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 379 55104 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 380 55104 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 381 55104 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 382 55104 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 383 55104 svf.c:1002 svf_run_command(): length = 8 |
Debug: 384 55104 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 385 55104 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 386 55115 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 387 55115 svf.c:1002 svf_run_command(): length = 32 |
Debug: 388 55115 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 389 55115 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 390 55115 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 391 55115 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 392 55125 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 393 55125 svf.c:1002 svf_run_command(): length = 8 |
Debug: 394 55125 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 395 55125 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 396 55125 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 397 55135 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 398 55135 command.c:549 command_print(): |
Time used: 0m0s35ms |
User : 399 55135 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 400 55468 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 401 55468 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 403 55468 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 404 55468 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 405 55468 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 406 55468 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 407 55468 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 408 55475 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 409 55475 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 411 55475 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 412 55475 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 413 55476 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 414 55476 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 415 55477 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 416 55477 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 417 55477 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 418 55477 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 419 55477 svf.c:1002 svf_run_command(): length = 8 |
Debug: 420 55477 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 421 55477 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 422 55488 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 423 55488 svf.c:1002 svf_run_command(): length = 32 |
Debug: 424 55488 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 425 55488 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 426 55488 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 427 55488 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 428 55498 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 429 55498 svf.c:1002 svf_run_command(): length = 8 |
Debug: 430 55498 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 431 55498 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 432 55498 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 433 55508 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 434 55508 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 435 55508 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 436 55848 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 437 55848 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 439 55848 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 440 55848 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 441 55848 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 442 55848 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 443 55848 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 444 55859 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 445 55860 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 447 55860 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 448 55860 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 449 55860 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 450 55860 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 451 55862 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 452 55862 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 453 55862 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 454 55862 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 455 55862 svf.c:1002 svf_run_command(): length = 8 |
Debug: 456 55862 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 457 55862 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 458 55873 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 459 55873 svf.c:1002 svf_run_command(): length = 32 |
Debug: 460 55873 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 461 55873 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 462 55873 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 463 55873 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 464 55884 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 465 55884 svf.c:1002 svf_run_command(): length = 8 |
Debug: 466 55884 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 467 55884 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 468 55884 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 469 55893 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 470 55893 command.c:549 command_print(): |
Time used: 0m0s45ms |
User : 471 55893 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 472 56268 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 473 56268 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 475 56268 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 476 56268 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 477 56268 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 478 56268 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 479 56268 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 480 56271 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 481 56272 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 483 56272 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 484 56272 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 485 56272 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 486 56272 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 487 56273 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 488 56273 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 489 56273 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 490 56273 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 491 56273 svf.c:1002 svf_run_command(): length = 8 |
Debug: 492 56273 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 493 56273 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 494 56284 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 495 56284 svf.c:1002 svf_run_command(): length = 32 |
Debug: 496 56284 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 497 56284 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 498 56284 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 499 56284 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 500 56294 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 501 56294 svf.c:1002 svf_run_command(): length = 8 |
Debug: 502 56294 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 503 56294 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 504 56294 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 505 56304 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 506 56304 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 507 56304 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 508 56663 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 509 56663 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 511 56663 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 512 56663 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 513 56663 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 514 56663 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 515 56663 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 516 56671 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 517 56671 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 519 56671 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 520 56671 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 521 56671 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 522 56671 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 523 56673 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 524 56673 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 525 56673 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 526 56673 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 527 56673 svf.c:1002 svf_run_command(): length = 8 |
Debug: 528 56673 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 529 56673 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 530 56684 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 531 56684 svf.c:1002 svf_run_command(): length = 32 |
Debug: 532 56684 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 533 56684 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 534 56684 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 535 56684 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 536 56694 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 537 56694 svf.c:1002 svf_run_command(): length = 8 |
Debug: 538 56694 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 539 56694 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 540 56694 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 541 56704 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 542 56704 command.c:549 command_print(): |
Time used: 0m0s41ms |
User : 543 56704 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 544 57076 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 545 57076 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 547 57076 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 548 57076 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 549 57076 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 550 57076 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 551 57076 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 552 57078 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 553 57079 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 555 57079 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 556 57079 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 557 57079 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 558 57079 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 559 57080 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 560 57080 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 561 57080 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 562 57080 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 563 57080 svf.c:1002 svf_run_command(): length = 8 |
Debug: 564 57080 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 565 57080 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 566 57091 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 567 57091 svf.c:1002 svf_run_command(): length = 32 |
Debug: 568 57091 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 569 57091 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 570 57091 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 571 57091 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 572 57101 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 573 57101 svf.c:1002 svf_run_command(): length = 8 |
Debug: 574 57101 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 575 57101 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 576 57101 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 577 57111 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 578 57111 command.c:549 command_print(): |
Time used: 0m0s35ms |
User : 579 57111 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 580 57479 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 581 57479 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 583 57479 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 584 57479 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 585 57479 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 586 57479 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 587 57479 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 588 57486 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 589 57486 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 591 57486 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 592 57487 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 593 57487 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 594 57487 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 595 57488 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 596 57488 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 597 57488 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 598 57488 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 599 57488 svf.c:1002 svf_run_command(): length = 8 |
Debug: 600 57488 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 601 57488 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 602 57499 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 603 57499 svf.c:1002 svf_run_command(): length = 32 |
Debug: 604 57499 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 605 57499 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 606 57499 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 607 57499 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 608 57509 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 609 57509 svf.c:1002 svf_run_command(): length = 8 |
Debug: 610 57509 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 611 57509 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 612 57509 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 613 57519 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 614 57519 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 615 57519 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 616 57904 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 617 57904 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 619 57904 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 620 57904 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 621 57904 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 622 57904 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 623 57904 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 624 57907 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 625 57907 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 627 57908 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 628 57908 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 629 57908 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 630 57908 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 631 57909 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 632 57909 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 633 57909 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 634 57909 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 635 57909 svf.c:1002 svf_run_command(): length = 8 |
Debug: 636 57909 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 637 57909 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 638 57920 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 639 57920 svf.c:1002 svf_run_command(): length = 32 |
Debug: 640 57920 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 641 57920 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 642 57920 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 643 57920 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 644 57930 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 645 57930 svf.c:1002 svf_run_command(): length = 8 |
Debug: 646 57930 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 647 57930 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 648 57930 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 649 57940 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 650 57940 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 651 57940 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 652 58284 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 653 58284 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 655 58284 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 656 58284 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 657 58284 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 658 58284 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 659 58284 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 660 58291 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 661 58291 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 663 58291 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 664 58291 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 665 58292 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 666 58292 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 667 58293 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 668 58293 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 669 58293 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 670 58293 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 671 58293 svf.c:1002 svf_run_command(): length = 8 |
Debug: 672 58293 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 673 58293 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 674 58304 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 675 58304 svf.c:1002 svf_run_command(): length = 32 |
Debug: 676 58304 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 677 58304 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 678 58304 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 679 58304 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 680 58314 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 681 58314 svf.c:1002 svf_run_command(): length = 8 |
Debug: 682 58314 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 683 58314 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 684 58314 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 685 58324 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 686 58324 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 687 58324 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 688 63403 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 689 63403 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 691 63403 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 692 63403 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 693 63403 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 694 63403 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 695 63403 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 696 63411 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 697 63411 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 699 63411 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 700 63411 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 701 63411 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 702 63411 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 703 63413 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 704 63413 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 705 63413 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 706 63413 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 707 63413 svf.c:1002 svf_run_command(): length = 8 |
Debug: 708 63413 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 709 63413 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 710 63424 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 711 63424 svf.c:1002 svf_run_command(): length = 32 |
Debug: 712 63424 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 713 63424 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 714 63424 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 715 63424 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 716 63434 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 717 63434 svf.c:1002 svf_run_command(): length = 8 |
Debug: 718 63434 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 719 63434 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 720 63434 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 721 63444 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 722 63444 command.c:549 command_print(): |
Time used: 0m0s41ms |
User : 723 63444 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 724 63874 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 725 63875 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 727 63875 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 728 63875 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 729 63875 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 730 63875 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 731 63875 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 732 63878 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 733 63878 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 735 63878 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 736 63878 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 737 63879 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 738 63879 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 739 63880 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 740 63880 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 741 63880 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 742 63880 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 743 63880 svf.c:1002 svf_run_command(): length = 8 |
Debug: 744 63880 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 745 63880 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 746 63891 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 747 63891 svf.c:1002 svf_run_command(): length = 32 |
Debug: 748 63891 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 749 63891 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 750 63891 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 751 63891 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 752 63901 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 753 63901 svf.c:1002 svf_run_command(): length = 8 |
Debug: 754 63901 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 755 63901 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 756 63901 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 757 63912 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 758 63912 command.c:549 command_print(): |
Time used: 0m0s37ms |
User : 759 63912 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 760 64343 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 761 64343 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 763 64343 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 764 64343 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 765 64343 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 766 64343 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 767 64343 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 768 64347 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 769 64347 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 771 64347 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 772 64347 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 773 64347 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 774 64347 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 775 64351 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 776 64351 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 777 64351 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 778 64351 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 779 64351 svf.c:1002 svf_run_command(): length = 8 |
Debug: 780 64351 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 781 64351 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 782 64363 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 783 64363 svf.c:1002 svf_run_command(): length = 32 |
Debug: 784 64363 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 785 64363 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 786 64363 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 787 64363 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 788 64373 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 789 64373 svf.c:1002 svf_run_command(): length = 8 |
Debug: 790 64373 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 791 64373 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 792 64373 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 793 64383 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 794 64383 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 795 64383 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 796 64792 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 797 64792 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 799 64792 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 800 64792 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 801 64792 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 802 64792 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 803 64792 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 804 64799 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 805 64799 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 807 64799 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 808 64799 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 809 64799 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 810 64799 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 811 64800 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 812 64800 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 813 64800 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 814 64800 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 815 64800 svf.c:1002 svf_run_command(): length = 8 |
Debug: 816 64800 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 817 64800 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 818 64811 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 819 64811 svf.c:1002 svf_run_command(): length = 32 |
Debug: 820 64811 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 821 64811 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 822 64811 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 823 64811 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 824 64822 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 825 64822 svf.c:1002 svf_run_command(): length = 8 |
Debug: 826 64822 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 827 64822 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 828 64822 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 829 64831 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 830 64831 command.c:549 command_print(): |
Time used: 0m0s39ms |
User : 831 64831 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 832 65258 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 833 65259 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 835 65259 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 836 65259 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 837 65259 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 838 65259 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 839 65259 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 840 65262 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 841 65262 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 843 65262 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 844 65262 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 845 65262 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 846 65262 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 847 65264 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 848 65264 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 849 65264 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 850 65264 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 851 65264 svf.c:1002 svf_run_command(): length = 8 |
Debug: 852 65264 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 853 65264 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 854 65275 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 855 65275 svf.c:1002 svf_run_command(): length = 32 |
Debug: 856 65275 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 857 65275 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 858 65275 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 859 65275 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 860 65285 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 861 65285 svf.c:1002 svf_run_command(): length = 8 |
Debug: 862 65285 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 863 65285 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 864 65285 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 865 65296 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 866 65296 command.c:549 command_print(): |
Time used: 0m0s37ms |
User : 867 65296 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 868 65714 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 869 65715 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 871 65715 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 872 65715 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 873 65715 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 874 65715 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 875 65715 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 876 65717 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 877 65717 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 879 65717 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 880 65717 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 881 65717 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 882 65717 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 883 65718 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 884 65718 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 885 65718 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 886 65718 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 887 65718 svf.c:1002 svf_run_command(): length = 8 |
Debug: 888 65718 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 889 65718 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 890 65729 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 891 65729 svf.c:1002 svf_run_command(): length = 32 |
Debug: 892 65729 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 893 65729 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 894 65729 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 895 65729 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 896 65739 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 897 65739 svf.c:1002 svf_run_command(): length = 8 |
Debug: 898 65739 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 899 65739 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 900 65739 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 901 65749 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 902 65749 command.c:549 command_print(): |
Time used: 0m0s34ms |
User : 903 65749 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 904 66183 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 905 66183 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 907 66183 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 908 66183 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 909 66183 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 910 66183 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 911 66183 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 912 66189 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 913 66189 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 915 66189 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 916 66189 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 917 66189 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 918 66189 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 919 66190 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 920 66190 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 921 66190 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 922 66190 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 923 66190 svf.c:1002 svf_run_command(): length = 8 |
Debug: 924 66190 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 925 66190 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 926 66202 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 927 66202 svf.c:1002 svf_run_command(): length = 32 |
Debug: 928 66202 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 929 66202 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 930 66202 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 931 66202 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 932 66212 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 933 66212 svf.c:1002 svf_run_command(): length = 8 |
Debug: 934 66212 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 935 66212 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 936 66212 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 937 66223 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 938 66223 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 939 66223 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 940 66639 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 941 66639 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 943 66639 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 944 66639 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 945 66639 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 946 66639 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 947 66639 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 948 66647 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 949 66647 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 951 66648 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 952 66648 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 953 66648 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 954 66648 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 955 66649 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 956 66649 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 957 66649 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 958 66649 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 959 66649 svf.c:1002 svf_run_command(): length = 8 |
Debug: 960 66649 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 961 66649 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 962 66660 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 963 66660 svf.c:1002 svf_run_command(): length = 32 |
Debug: 964 66660 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 965 66660 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 966 66660 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 967 66660 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 968 66670 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 969 66670 svf.c:1002 svf_run_command(): length = 8 |
Debug: 970 66670 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 971 66670 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 972 66670 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 973 66680 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 974 66680 command.c:549 command_print(): |
Time used: 0m0s41ms |
User : 975 66680 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 976 67063 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 977 67063 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 979 67063 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 980 67063 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 981 67063 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 982 67063 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 983 67063 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 984 67070 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 985 67070 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 987 67070 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 988 67070 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 989 67070 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 990 67070 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 991 67071 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 992 67071 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 993 67071 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 994 67071 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 995 67071 svf.c:1002 svf_run_command(): length = 8 |
Debug: 996 67071 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 997 67071 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 998 67082 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 999 67082 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1000 67082 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1001 67082 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1002 67082 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1003 67082 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1004 67092 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1005 67092 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1006 67092 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1007 67092 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1008 67092 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1009 67102 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1010 67102 command.c:549 command_print(): |
Time used: 0m0s39ms |
User : 1011 67102 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1012 67462 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1013 67463 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1015 67463 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1016 67463 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1017 67463 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1018 67463 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1019 67463 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1020 67474 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1021 67474 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1023 67474 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1024 67474 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1025 67474 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1026 67474 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1027 67476 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1028 67476 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1029 67476 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1030 67476 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1031 67476 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1032 67476 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1033 67476 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1034 67487 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1035 67487 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1036 67487 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1037 67487 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1038 67487 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1039 67487 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1040 67497 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1041 67497 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1042 67497 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1043 67497 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1044 67497 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1045 67507 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1046 67507 command.c:549 command_print(): |
Time used: 0m0s44ms |
User : 1047 67507 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1048 67871 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1049 67872 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1051 67872 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1052 67872 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1053 67872 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1054 67872 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1055 67872 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1056 67875 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1057 67875 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1059 67875 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1060 67875 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1061 67875 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1062 67875 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1063 67877 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1064 67877 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1065 67877 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1066 67877 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1067 67877 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1068 67877 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1069 67877 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1070 67888 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1071 67888 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1072 67888 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1073 67888 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1074 67888 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1075 67888 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1076 67898 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1077 67898 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1078 67898 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1079 67898 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1080 67898 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1081 67908 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1082 67908 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 1083 67908 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1084 68320 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1085 68320 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1087 68320 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1088 68320 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1089 68320 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1090 68320 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1091 68320 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1092 68323 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1093 68323 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1095 68323 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1096 68323 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1097 68323 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1098 68323 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1099 68325 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1100 68325 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1101 68325 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1102 68325 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1103 68325 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1104 68325 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1105 68325 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1106 68336 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1107 68336 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1108 68336 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1109 68336 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1110 68336 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1111 68336 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1112 68346 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1113 68346 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1114 68346 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1115 68346 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1116 68346 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1117 68358 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1118 68358 command.c:549 command_print(): |
Time used: 0m0s38ms |
User : 1119 68358 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1120 68760 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1121 68760 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1123 68761 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1124 68761 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1125 68761 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1126 68761 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1127 68761 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1128 68770 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1129 68770 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1131 68770 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1132 68770 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1133 68770 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1134 68770 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1135 68772 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1136 68772 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1137 68772 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1138 68772 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1139 68772 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1140 68772 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1141 68772 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1142 68783 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1143 68783 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1144 68783 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1145 68783 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1146 68783 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1147 68783 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1148 68793 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1149 68793 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1150 68793 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1151 68793 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1152 68793 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1153 68803 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1154 68803 command.c:549 command_print(): |
Time used: 0m0s42ms |
User : 1155 68803 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1156 69126 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1157 69127 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1159 69127 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1160 69127 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1161 69127 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1162 69127 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1163 69127 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1164 69135 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1165 69135 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1167 69135 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1168 69135 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1169 69135 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1170 69135 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1171 69136 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1172 69136 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1173 69136 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1174 69136 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1175 69136 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1176 69136 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1177 69136 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1178 69147 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1179 69147 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1180 69147 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1181 69147 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1182 69147 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1183 69147 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1184 69157 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1185 69157 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1186 69157 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1187 69157 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1188 69157 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1189 69167 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1190 69167 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 1191 69167 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1192 69543 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1193 69543 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1195 69543 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1196 69543 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1197 69543 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1198 69543 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1199 69543 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1200 69547 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1201 69547 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1203 69547 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1204 69547 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1205 69547 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1206 69548 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1207 69551 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1208 69551 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1209 69551 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1210 69551 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1211 69551 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1212 69551 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1213 69551 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1214 69562 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1215 69562 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1216 69562 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1217 69562 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1218 69562 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1219 69562 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1220 69572 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1221 69572 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1222 69572 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1223 69572 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1224 69572 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1225 69582 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1226 69582 command.c:549 command_print(): |
Time used: 0m0s39ms |
User : 1227 69582 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1228 69936 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1229 69936 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1231 69936 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1232 69936 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1233 69936 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1234 69936 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1235 69936 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1236 69943 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1237 69943 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1239 69943 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1240 69944 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1241 69944 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1242 69944 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1243 69945 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1244 69945 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1245 69945 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1246 69945 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1247 69945 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1248 69945 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1249 69945 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1250 69957 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1251 69957 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1252 69957 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1253 69957 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1254 69957 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1255 69957 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1256 69966 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1257 69966 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1258 69966 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1259 69966 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1260 69966 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1261 69976 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1262 69976 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 1263 69976 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1264 70340 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1265 70340 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1267 70340 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1268 70340 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1269 70340 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1270 70340 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1271 70340 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1272 70347 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1273 70347 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1275 70348 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1276 70348 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1277 70348 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1278 70348 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1279 70349 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1280 70349 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1281 70349 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1282 70349 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1283 70349 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1284 70349 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1285 70349 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1286 70360 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1287 70360 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1288 70360 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1289 70360 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1290 70360 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1291 70360 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1292 70370 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1293 70370 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1294 70370 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1295 70370 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1296 70370 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1297 70380 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1298 70380 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 1299 70380 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1300 70759 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1301 70759 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1303 70759 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1304 70759 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1305 70759 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1306 70759 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1307 70759 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1308 70761 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1309 70761 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1311 70761 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1312 70761 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1313 70761 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1314 70761 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1315 70762 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1316 70762 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1317 70762 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1318 70762 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1319 70762 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1320 70762 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1321 70762 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1322 70773 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1323 70773 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1324 70773 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1325 70773 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1326 70773 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1327 70773 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1328 70783 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1329 70783 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1330 70783 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1331 70783 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1332 70783 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1333 70793 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1334 70793 command.c:549 command_print(): |
Time used: 0m0s34ms |
User : 1335 70793 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1336 71155 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1337 71155 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1339 71155 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1340 71155 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1341 71155 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1342 71155 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1343 71155 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1344 71158 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1345 71158 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1347 71158 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1348 71158 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1349 71158 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1350 71158 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1351 71162 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1352 71162 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1353 71162 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1354 71162 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1355 71162 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1356 71162 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1357 71162 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1358 71173 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1359 71173 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1360 71173 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1361 71173 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1362 71173 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1363 71173 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1364 71183 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1365 71183 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1366 71183 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1367 71183 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1368 71183 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1369 71193 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1370 71193 command.c:549 command_print(): |
Time used: 0m0s38ms |
User : 1371 71193 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1372 71519 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1373 71519 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1375 71519 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1376 71519 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1377 71519 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1378 71519 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1379 71519 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1380 71527 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1381 71527 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1383 71527 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1384 71527 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1385 71527 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1386 71527 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1387 71529 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1388 71529 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1389 71529 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1390 71529 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1391 71529 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1392 71529 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1393 71529 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1394 71540 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1395 71540 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1396 71540 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1397 71540 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1398 71540 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1399 71540 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1400 71550 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1401 71550 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1402 71550 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1403 71550 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1404 71550 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1405 71560 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1406 71560 command.c:549 command_print(): |
Time used: 0m0s41ms |
User : 1407 71560 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1408 71882 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1409 71883 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1411 71883 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1412 71883 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1413 71883 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1414 71883 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1415 71883 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1416 71886 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1417 71886 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1419 71886 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1420 71886 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1421 71886 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1422 71887 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1423 71888 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1424 71888 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1425 71888 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1426 71888 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1427 71888 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1428 71888 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1429 71888 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1430 71899 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1431 71899 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1432 71899 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1433 71899 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1434 71899 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1435 71899 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1436 71909 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1437 71909 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1438 71909 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1439 71909 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1440 71909 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1441 71919 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1442 71919 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 1443 71919 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1444 72279 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1445 72279 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1447 72279 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1448 72279 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1449 72279 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1450 72279 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1451 72279 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1452 72284 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1453 72284 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1455 72284 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1456 72284 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1457 72284 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1458 72284 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1459 72286 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1460 72286 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1461 72286 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1462 72286 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1463 72287 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1464 72287 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1465 72287 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1466 72298 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1467 72298 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1468 72298 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1469 72298 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1470 72298 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1471 72298 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1472 72308 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1473 72308 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1474 72308 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1475 72308 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1476 72308 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1477 72318 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1478 72318 command.c:549 command_print(): |
Time used: 0m0s39ms |
User : 1479 72318 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1480 72724 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1481 72724 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1483 72724 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1484 72724 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1485 72724 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1486 72724 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1487 72724 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1488 72731 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1489 72731 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1491 72732 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1492 72732 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1493 72732 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1494 72732 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1495 72733 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1496 72733 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1497 72733 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1498 72733 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1499 72733 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1500 72733 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1501 72733 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1502 72744 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1503 72744 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1504 72744 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1505 72744 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1506 72744 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1507 72744 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1508 72754 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1509 72754 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1510 72754 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1511 72754 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1512 72754 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1513 72764 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1514 72764 command.c:549 command_print(): |
Time used: 0m0s40ms |
User : 1515 72764 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1516 73156 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1517 73156 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1519 73156 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1520 73156 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1521 73156 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1522 73156 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1523 73156 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1524 73167 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1525 73167 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1527 73167 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1528 73167 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1529 73167 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1530 73167 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1531 73171 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1532 73171 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1533 73171 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1534 73171 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1535 73171 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1536 73171 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1537 73171 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1538 73182 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1539 73182 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1540 73182 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1541 73182 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1542 73182 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1543 73182 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1544 73192 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1545 73192 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1546 73192 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1547 73192 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1548 73192 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1549 73202 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1550 73202 command.c:549 command_print(): |
Time used: 0m0s46ms |
User : 1551 73202 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1552 73571 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1553 73571 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1555 73571 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1556 73571 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1557 73571 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1558 73571 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1559 73571 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1560 73573 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1561 73573 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1563 73573 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1564 73573 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1565 73573 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1566 73573 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1567 73574 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1568 73574 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1569 73574 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1570 73574 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1571 73574 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1572 73574 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1573 73574 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1574 73586 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1575 73586 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1576 73586 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1577 73586 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1578 73586 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1579 73586 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1580 73596 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1581 73596 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1582 73596 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1583 73596 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1584 73596 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1585 73607 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1586 73607 command.c:549 command_print(): |
Time used: 0m0s36ms |
User : 1587 73607 command.c:549 command_print(): svf file programmed successfully for 22 commands |
Debug: 1588 8674595 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_svf -tap cpld.tap ../test/test.svf quiet |
Debug: 1589 8674595 command.c:145 script_debug(): command - svf ocd_svf -tap cpld.tap ../test/test.svf quiet |
User : 1591 8674595 svf.c:359 handle_svf_command(): svf processing file: "../test/test.svf" |
Debug: 1592 8674595 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1593 8674595 svf.c:1509 svf_run_command(): move to RESET by svf_add_statemove |
Debug: 1594 8674595 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 1595 8674595 svf.c:1509 svf_run_command(): move to RUN/IDLE by svf_add_statemove |
Debug: 1596 8674602 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 1597 8674602 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 1599 8674602 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 1600 8674602 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1601 8674602 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 1602 8674602 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 1603 8674603 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 1604 8674603 core.c:1595 adapter_khz_to_speed(): have interface set up |
User : 1605 8674603 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 1606 8674603 svf.c:956 svf_run_command(): frequency = 1000000.000000 |
Debug: 1607 8674603 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1608 8674603 svf.c:1039 svf_run_command(): TDI = 0xFE |
Debug: 1609 8674603 svf.c:1039 svf_run_command(): SMASK = 0xFF |
Debug: 1610 8674614 svf.c:1579 svf_run_command(): TDO read = 0x1 |
Debug: 1611 8674614 svf.c:1002 svf_run_command(): length = 32 |
Debug: 1612 8674614 svf.c:1039 svf_run_command(): TDI = 0x0 |
Debug: 1613 8674614 svf.c:1039 svf_run_command(): SMASK = 0xFFFFFFFF |
Debug: 1614 8674614 svf.c:1039 svf_run_command(): TDO = 0x1541053 |
Debug: 1615 8674614 svf.c:1039 svf_run_command(): MASK = 0xFFFFFFF |
Debug: 1616 8674624 svf.c:1579 svf_run_command(): TDO read = 0x1541053 |
Debug: 1617 8674624 svf.c:1002 svf_run_command(): length = 8 |
Debug: 1618 8674624 svf.c:1039 svf_run_command(): TDI = 0xFF |
Debug: 1619 8674624 svf.c:1039 svf_run_command(): TDO = 0x1 |
Debug: 1620 8674624 svf.c:1039 svf_run_command(): MASK = 0xE3 |
Debug: 1621 8674634 svf.c:1579 svf_run_command(): TDO read = 0x1 |
User : 1622 8674634 command.c:549 command_print(): |
Time used: 0m0s39ms |
User : 1623 8674634 command.c:549 command_print(): svf file programmed successfully for 22 commands |
User : 1624 8849563 command.c:669 command_run_line(): invalid command name "q" |
Debug: 1625 8851215 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_exit |
Debug: 1626 8851215 command.c:145 script_debug(): command - exit ocd_exit |
Info : 1628 8851215 server.c:472 server_loop(): dropped 'telnet' connection |
/phr/trunk/codigo/jtag/openocd/cpld/cpld.cfg~
0,0 → 1,42
#LPC-2124 CPU |
|
if { [info exists CHIPNAME] } { |
set _CHIPNAME $CHIPNAME |
} else { |
set _CHIPNAME lpc2124 |
} |
|
if { [info exists ENDIAN] } { |
set _ENDIAN $ENDIAN |
} else { |
set _ENDIAN little |
} |
|
if { [info exists CPUTAPID ] } { |
set _CPUTAPID $CPUTAPID |
} else { |
# force an error till we get a good number |
set _CPUTAPID 0x4f1f0f0f |
} |
|
|
#use combined on interfaces or targets that can't set TRST/SRST separately |
reset_config trst_and_srst srst_pulls_trst |
|
# reset delays |
jtag_nsrst_delay 100 |
jtag_ntrst_delay 100 |
|
jtag_khz 1000 |
|
#jtag scan chain |
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID |
|
set _TARGETNAME $_CHIPNAME.cpu |
target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4 |
|
$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0 |
|
|
#flash bank <driver> <base> <size> <chip_width> <bus_width> |
flash bank lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum |
/phr/trunk/codigo/jtag/openocd/find_tap/core.cfg~
2,6 → 2,6
ft2232_device_desc |
ft2232_layout oocdlink |
ft2232_latency 10 |
ft2232_vid_pid 0x0403 0x6001 |
ft2232_vid_pid 0x0403 0x6010 |
reset_config srst_only |
adapter_khz 10 |
adapter_khz 1000 |
/phr/trunk/codigo/jtag/openocd/find_tap/openocd.cfg
11,6 → 11,7
|
# ----------------------- |
source [find core.cfg] |
#source [find ../fpga/spartan3a.cfg] |
|
reset_config trst_and_srst |
|
/phr/trunk/codigo/jtag/openocd/find_tap/core.cfg
2,6 → 2,6
ft2232_device_desc |
ft2232_layout oocdlink |
ft2232_latency 10 |
ft2232_vid_pid 0x0403 0x6001 |
ft2232_vid_pid 0x0403 0x6010 |
reset_config srst_only |
adapter_khz 1000 |
adapter_khz 100 |
/phr/trunk/codigo/jtag/openocd/find_tap/out.log
9,100 → 9,104
Info : 24 4 transport.c:118 allow_transports(): only one transport option; autoselect 'jtag' |
Debug: 25 4 command.c:369 register_command_handler(): registering 'ocd_jtag_flush_queue_sleep'... |
Debug: 26 4 command.c:369 register_command_handler(): registering 'ocd_jtag_rclk'... |
Debug: 27 5 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_delay'... |
Debug: 28 5 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'... |
Debug: 29 5 command.c:369 register_command_handler(): registering 'ocd_scan_chain'... |
Debug: 30 5 command.c:369 register_command_handler(): registering 'ocd_jtag_reset'... |
Debug: 31 5 command.c:369 register_command_handler(): registering 'ocd_runtest'... |
Debug: 32 5 command.c:369 register_command_handler(): registering 'ocd_irscan'... |
Debug: 33 5 command.c:369 register_command_handler(): registering 'ocd_verify_ircapture'... |
Debug: 34 5 command.c:369 register_command_handler(): registering 'ocd_verify_jtag'... |
Debug: 35 5 command.c:369 register_command_handler(): registering 'ocd_tms_sequence'... |
Debug: 36 5 command.c:369 register_command_handler(): registering 'ocd_wait_srst_deassert'... |
Debug: 37 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 38 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 39 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 40 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 41 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 42 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 43 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 44 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 27 4 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_delay'... |
Debug: 28 4 command.c:369 register_command_handler(): registering 'ocd_jtag_ntrst_assert_width'... |
Debug: 29 4 command.c:369 register_command_handler(): registering 'ocd_scan_chain'... |
Debug: 30 4 command.c:369 register_command_handler(): registering 'ocd_jtag_reset'... |
Debug: 31 4 command.c:369 register_command_handler(): registering 'ocd_runtest'... |
Debug: 32 4 command.c:369 register_command_handler(): registering 'ocd_irscan'... |
Debug: 33 4 command.c:369 register_command_handler(): registering 'ocd_verify_ircapture'... |
Debug: 34 4 command.c:369 register_command_handler(): registering 'ocd_verify_jtag'... |
Debug: 35 4 command.c:369 register_command_handler(): registering 'ocd_tms_sequence'... |
Debug: 36 4 command.c:369 register_command_handler(): registering 'ocd_wait_srst_deassert'... |
Debug: 37 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 38 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 39 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 40 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 41 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 42 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 43 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 44 4 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 45 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 46 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 47 6 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 48 6 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 49 6 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 50 6 command.c:369 register_command_handler(): registering 'ocd_svf'... |
Debug: 51 6 command.c:369 register_command_handler(): registering 'ocd_xsvf'... |
Debug: 52 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_device_desc |
Debug: 53 6 command.c:145 script_debug(): command - ft2232_device_desc ocd_ft2232_device_desc |
Error: 55 6 ft2232.c:3175 ft2232_handle_device_desc_command(): expected exactly one argument to ft2232_device_desc <description> |
Debug: 56 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_layout oocdlink |
Debug: 57 6 command.c:145 script_debug(): command - ft2232_layout ocd_ft2232_layout oocdlink |
Debug: 59 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_latency 10 |
Debug: 60 6 command.c:145 script_debug(): command - ft2232_latency ocd_ft2232_latency 10 |
Debug: 62 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 63 6 command.c:145 script_debug(): command - ft2232_vid_pid ocd_ft2232_vid_pid 0x0403 0x6001 |
Debug: 65 7 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only |
Debug: 66 7 command.c:145 script_debug(): command - reset_config ocd_reset_config srst_only |
User : 68 7 command.c:549 command_print(): srst_only separate srst_gates_jtag srst_open_drain |
Debug: 69 7 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 1000 |
Debug: 70 7 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 1000 |
Debug: 72 7 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 73 7 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 74 7 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 75 7 command.c:549 command_print(): adapter speed: 1000 kHz |
Debug: 76 7 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config trst_and_srst |
Debug: 77 7 command.c:145 script_debug(): command - reset_config ocd_reset_config trst_and_srst |
User : 79 7 command.c:549 command_print(): trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain |
Debug: 80 7 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 81 7 command.c:145 script_debug(): command - init ocd_init |
Debug: 83 7 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target init |
Debug: 84 8 command.c:145 script_debug(): command - ocd_target ocd_target init |
Debug: 86 8 target.c:1183 handle_target_init_command(): Initializing targets... |
Debug: 87 8 ft2232.c:2337 ft2232_init(): ft2232 interface using shortest path jtag state transitions |
Debug: 88 8 ft2232.c:2224 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'oocdlink' layout (0403:6001) |
Debug: 89 229 ft2232.c:2263 ft2232_init_libftdi(): current latency timer: 10 |
Debug: 90 230 ft2232.c:2274 ft2232_init_libftdi(): FTDI chip type: 2 "2232C" |
Debug: 91 230 ft2232.c:2299 ft2232_set_data_bits_low_byte(): 80 08 1b |
Debug: 92 231 ft2232.c:2318 ft2232_set_data_bits_high_byte(): 82 06 0f |
Debug: 93 235 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 94 235 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 95 235 ft2232.c:683 ft2232_speed(): 86 05 00 |
Debug: 96 236 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 97 236 core.c:1595 adapter_khz_to_speed(): have interface set up |
Info : 98 236 core.c:1399 adapter_init(): clock speed 1000 kHz |
Debug: 99 236 openocd.c:132 handle_init_command(): Debug Adapter init complete |
Debug: 100 236 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_transport init |
Debug: 101 236 command.c:145 script_debug(): command - ocd_transport ocd_transport init |
Debug: 103 236 transport.c:240 handle_transport_init(): handle_transport_init |
Debug: 104 236 ft2232.c:1394 jtagkey_reset(): trst: 0, srst: 0, high_output: 0x06, high_direction: 0x0f |
Debug: 105 237 core.c:719 jtag_add_reset(): SRST line released |
Debug: 106 237 core.c:743 jtag_add_reset(): TRST line released |
Debug: 107 237 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 108 237 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag arp_init |
Debug: 109 237 command.c:145 script_debug(): command - ocd_jtag ocd_jtag arp_init |
Debug: 110 237 core.c:1412 jtag_init_inner(): Init JTAG chain |
Warn : 111 237 core.c:1428 jtag_init_inner(): There are no enabled taps. AUTO PROBING MIGHT NOT WORK!! |
Debug: 112 237 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 113 238 core.c:1048 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS |
Debug: 114 238 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Warn : 115 249 core.c:1145 jtag_examine_chain(): AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0xff541053 ..." |
Debug: 116 249 core.c:1323 jtag_tap_init(): Created Tap: auto0.tap @ abs position 0, irlen 0, capture: 0x1 mask: 0x3 |
Debug: 117 249 core.c:1208 jtag_validate_ircapture(): IR capture validation scan |
Warn : 118 259 core.c:1244 jtag_validate_ircapture(): AUTO auto0.tap - use "... -irlen 8" |
Debug: 119 259 core.c:1267 jtag_validate_ircapture(): auto0.tap: IR capture 0x1 |
Debug: 120 259 openocd.c:145 handle_init_command(): Examining targets... |
Debug: 121 259 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash init |
Debug: 122 259 command.c:145 script_debug(): command - ocd_flash ocd_flash init |
Debug: 124 259 tcl.c:847 handle_flash_init_command(): Initializing flash devices... |
Debug: 125 259 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_mflash init |
Debug: 126 259 command.c:145 script_debug(): command - ocd_mflash ocd_mflash init |
Debug: 128 259 mflash.c:1379 handle_mflash_init_command(): Initializing mflash devices... |
Debug: 129 259 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_nand init |
Debug: 130 259 command.c:145 script_debug(): command - ocd_nand ocd_nand init |
Debug: 132 259 tcl.c:497 handle_nand_init_command(): Initializing NAND devices... |
Debug: 133 259 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_pld init |
Debug: 134 259 command.c:145 script_debug(): command - ocd_pld ocd_pld init |
Debug: 136 259 pld.c:207 handle_pld_init_command(): Initializing PLDs... |
Warn : 137 259 gdb_server.c:2311 gdb_target_add_all(): gdb services need one or more targets defined |
Debug: 47 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 48 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 49 5 command.c:369 register_command_handler(): registering 'ocd_jtag'... |
Debug: 50 5 command.c:369 register_command_handler(): registering 'ocd_svf'... |
Debug: 51 5 command.c:369 register_command_handler(): registering 'ocd_xsvf'... |
Debug: 52 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_device_desc |
Debug: 53 5 command.c:145 script_debug(): command - ft2232_device_desc ocd_ft2232_device_desc |
Error: 55 5 ft2232.c:3175 ft2232_handle_device_desc_command(): expected exactly one argument to ft2232_device_desc <description> |
Debug: 56 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_layout oocdlink |
Debug: 57 5 command.c:145 script_debug(): command - ft2232_layout ocd_ft2232_layout oocdlink |
Debug: 59 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_latency 10 |
Debug: 60 5 command.c:145 script_debug(): command - ft2232_latency ocd_ft2232_latency 10 |
Debug: 62 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_ft2232_vid_pid 0x0403 0x6010 |
Debug: 63 5 command.c:145 script_debug(): command - ft2232_vid_pid ocd_ft2232_vid_pid 0x0403 0x6010 |
Debug: 65 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config srst_only |
Debug: 66 5 command.c:145 script_debug(): command - reset_config ocd_reset_config srst_only |
User : 68 5 command.c:549 command_print(): srst_only separate srst_gates_jtag srst_open_drain |
Debug: 69 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_adapter_khz 100 |
Debug: 70 5 command.c:145 script_debug(): command - adapter_khz ocd_adapter_khz 100 |
Debug: 72 5 core.c:1625 jtag_config_khz(): handle jtag khz |
Debug: 73 5 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 74 5 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
User : 75 5 command.c:549 command_print(): adapter speed: 100 kHz |
Debug: 76 5 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_reset_config trst_and_srst |
Debug: 77 5 command.c:145 script_debug(): command - reset_config ocd_reset_config trst_and_srst |
User : 79 5 command.c:549 command_print(): trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain |
Debug: 80 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_init |
Debug: 81 6 command.c:145 script_debug(): command - init ocd_init |
Debug: 83 6 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_target init |
Debug: 84 6 command.c:145 script_debug(): command - ocd_target ocd_target init |
Debug: 86 6 target.c:1183 handle_target_init_command(): Initializing targets... |
Debug: 87 6 ft2232.c:2337 ft2232_init(): ft2232 interface using shortest path jtag state transitions |
Debug: 88 6 ft2232.c:2224 ft2232_init_libftdi(): 'ft2232' interface using libftdi with 'oocdlink' layout (0403:6010) |
Debug: 89 222 ft2232.c:2263 ft2232_init_libftdi(): current latency timer: 10 |
Debug: 90 223 ft2232.c:2274 ft2232_init_libftdi(): FTDI chip type: 2 "2232C" |
Debug: 91 223 ft2232.c:2299 ft2232_set_data_bits_low_byte(): 80 08 1b |
Debug: 92 224 ft2232.c:2318 ft2232_set_data_bits_high_byte(): 82 06 0f |
Debug: 93 228 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 94 228 core.c:1595 adapter_khz_to_speed(): have interface set up |
Debug: 95 228 ft2232.c:683 ft2232_speed(): 86 3b 00 |
Debug: 96 229 core.c:1592 adapter_khz_to_speed(): convert khz to interface specific speed value |
Debug: 97 229 core.c:1595 adapter_khz_to_speed(): have interface set up |
Info : 98 229 core.c:1399 adapter_init(): clock speed 100 kHz |
Debug: 99 229 openocd.c:132 handle_init_command(): Debug Adapter init complete |
Debug: 100 229 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_transport init |
Debug: 101 229 command.c:145 script_debug(): command - ocd_transport ocd_transport init |
Debug: 103 229 transport.c:240 handle_transport_init(): handle_transport_init |
Debug: 104 229 ft2232.c:1394 jtagkey_reset(): trst: 0, srst: 0, high_output: 0x06, high_direction: 0x0f |
Debug: 105 230 core.c:719 jtag_add_reset(): SRST line released |
Debug: 106 230 core.c:743 jtag_add_reset(): TRST line released |
Debug: 107 230 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 108 230 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_jtag arp_init |
Debug: 109 230 command.c:145 script_debug(): command - ocd_jtag ocd_jtag arp_init |
Debug: 110 230 core.c:1412 jtag_init_inner(): Init JTAG chain |
Warn : 111 230 core.c:1428 jtag_init_inner(): There are no enabled taps. AUTO PROBING MIGHT NOT WORK!! |
Debug: 112 230 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Debug: 113 231 core.c:1048 jtag_examine_chain(): DR scan interrogation for IDCODE/BYPASS |
Debug: 114 231 core.c:323 jtag_call_event_callbacks(): jtag event: TAP reset |
Warn : 115 246 core.c:1145 jtag_examine_chain(): AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0xd5044093 ..." |
Debug: 116 246 core.c:1323 jtag_tap_init(): Created Tap: auto0.tap @ abs position 0, irlen 0, capture: 0x1 mask: 0x3 |
Warn : 117 246 core.c:1145 jtag_examine_chain(): AUTO auto1.tap - use "jtag newtap auto1 tap -expected-id 0xff80080b ..." |
Debug: 118 246 core.c:1323 jtag_tap_init(): Created Tap: auto1.tap @ abs position 1, irlen 0, capture: 0x1 mask: 0x3 |
Debug: 119 246 core.c:1208 jtag_validate_ircapture(): IR capture validation scan |
Warn : 120 256 core.c:1244 jtag_validate_ircapture(): AUTO auto0.tap - use "... -irlen 8" |
Debug: 121 256 core.c:1267 jtag_validate_ircapture(): auto0.tap: IR capture 0x1 |
Warn : 122 256 core.c:1244 jtag_validate_ircapture(): AUTO auto1.tap - use "... -irlen 3" |
Debug: 123 256 core.c:1267 jtag_validate_ircapture(): auto1.tap: IR capture 0x001 |
Debug: 124 256 openocd.c:145 handle_init_command(): Examining targets... |
Debug: 125 256 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_flash init |
Debug: 126 256 command.c:145 script_debug(): command - ocd_flash ocd_flash init |
Debug: 128 256 tcl.c:847 handle_flash_init_command(): Initializing flash devices... |
Debug: 129 256 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_mflash init |
Debug: 130 256 command.c:145 script_debug(): command - ocd_mflash ocd_mflash init |
Debug: 132 256 mflash.c:1379 handle_mflash_init_command(): Initializing mflash devices... |
Debug: 133 256 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_nand init |
Debug: 134 256 command.c:145 script_debug(): command - ocd_nand ocd_nand init |
Debug: 136 256 tcl.c:497 handle_nand_init_command(): Initializing NAND devices... |
Debug: 137 256 command.c:145 script_debug(): command - ocd_command ocd_command type ocd_pld init |
Debug: 138 256 command.c:145 script_debug(): command - ocd_pld ocd_pld init |
Debug: 140 256 pld.c:207 handle_pld_init_command(): Initializing PLDs... |
Warn : 141 256 gdb_server.c:2311 gdb_target_add_all(): gdb services need one or more targets defined |
/phr/trunk/codigo/jtag/openocd/fpga/spartan3a.cfg~
--- phr/trunk/codigo/jtag/openocd/fpga/spartan3a.cfg (nonexistent)
+++ phr/trunk/codigo/jtag/openocd/fpga/spartan3a.cfg (revision 78)
@@ -0,0 +1,2 @@
+jtag newtap xcf01s tap -irlen 8 -expected-id 0xd5044093 -ignore-version
+jtag newtap xc3s50a tap -irlen 6 -expected-id 0xf2210093 -ignore-version