OpenCores
URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /amber
    from Rev 28 to Rev 29
    ↔ Reverse comparison
  •

Rev 28 → Rev 29

/trunk/hw/tools/run.sh
54,6 → 54,7
SET_V=0
SET_A=0
SET_5=0
SET_L=0
 
 
# show program usage
65,6 → 66,7
echo " -g : Use Modelsim GUI"
echo " -d <cycle number to start dumping>: Create vcd file"
echo " -t <cycle number to start dumping>: Create vcd file and terminate"
echo " -l : Create wlf dump of complete design"
echo " -s : Use Xilinx Spatran6 Libraries (slower sim)"
echo " -v : Use Xilinx Virtex6 Libraries (slower sim)"
echo " -5 : Use Amber25 core instead of Amber23 core"
111,6 → 113,8
shift ;;
-g) SET_G=1 # Bring up GUI
shift ;;
-l) SET_L=1 # Create wlf wave dump file
shift ;;
-d) SET_D=1
DUMP_START=$2
shift 2;;
138,7 → 142,11
if [ $SET_G == 1 ]; then
RUN_OPTIONS="-do cmd.do"
else
RUN_OPTIONS="${RUN_OPTIONS} -c -do run.do"
if [ $SET_L == 1 ]; then
RUN_OPTIONS="${RUN_OPTIONS} -c -do run-log.do"
else
RUN_OPTIONS="${RUN_OPTIONS} -c -do run.do"
fi
fi
 
if [ $SET_S == 1 ]; then
/trunk/hw/sim/cmd.do
1,9 → 1,7
onerror {resume}
 
log -r /tb/*
 
add list -r sim:/tb/*
#add list sim:/tb/*
 
configure list -usestrobe 0
configure list -strobestart {0 ps} -strobeperiod {0 ps}
configure list -usesignaltrigger 1
/trunk/hw/sim/run-log.do
0,0 → 1,104
log /tb/clk_count
log /tb/u_system/u_uart0/i_uart_rxd
log /tb/u_system/u_uart0/rx_fifo
log /tb/u_system/u_uart0/fifo_enable
log /tb/u_system/u_uart0/rx_fifo_push
log /tb/u_system/u_uart0/rx_fifo_push_not_full
log /tb/u_system/u_uart0/rx_byte
log /tb/u_system/u_uart0/xRXD_STATE
log /tb/u_system/u_uart0/TX_BITADJUST_COUNT
log /tb/u_system/u_uart0/TX_BITPULSE_COUNT
log /tb/u_system/u_uart0/xTXD_STATE
log /tb/u_tb_uart/i_uart_rxd
log /tb/u_tb_uart/o_uart_txd
log /tb/u_tb_uart/rx_bit_count
log /tb/u_tb_uart/rx_bit_start
log /tb/u_tb_uart/rx_byte
log /tb/u_system/ddr3_addr
log /tb/u_system/ddr3_ba
log /tb/u_system/ddr3_cas_n
log /tb/u_system/ddr3_ck_n
log /tb/u_system/ddr3_ck_p
log /tb/u_system/ddr3_cke
log /tb/u_system/ddr3_dm
log /tb/u_system/ddr3_dq
log /tb/u_system/ddr3_dqs_n
log /tb/u_system/ddr3_dqs_p
log /tb/u_system/ddr3_odt
log /tb/u_system/ddr3_ras_n
log /tb/u_system/ddr3_reset_n
log /tb/u_system/ddr3_we_n
log /tb/u_system/u_amber/fetch_stall
log /tb/u_system/u_amber/u_fetch/o_fetch_stall
log /tb/u_system/u_amber/u_fetch/sel_cache
log /tb/u_system/u_amber/u_fetch/u_cache/o_stall
log /tb/u_system/u_amber/u_fetch/u_cache/read_stall
log /tb/u_system/u_amber/u_fetch/u_cache/o_wb_req
log /tb/u_system/u_amber/u_fetch/u_cache/xC_STATE
log /tb/u_system/u_amber/u_fetch/u_cache/miss_address
log /tb/u_system/u_amber/u_fetch/u_cache/read_miss
log /tb/u_system/u_amber/u_fetch/u_cache/o_read_data
log /tb/u_system/u_amber/u_coprocessor/o_cache_enable
log /tb/u_system/u_amber/u_fetch/u_cache/i_core_stall
log /tb/u_system/u_amber/u_fetch/u_cache/i_select
log /tb/u_system/u_amber/u_fetch/sel_cache
log /tb/u_system/u_amber/u_fetch/u_cache/tag_wdata
log /tb/u_system/u_amber/u_fetch/u_cache/tag_address
log /tb/u_system/u_amber/u_fetch/u_cache/tag_wenable
log /tb/u_system/u_amber/u_fetch/u_cache/data_wdata
log /tb/u_system/u_amber/u_decode/xMODE
log /tb/u_system/u_amber/u_decode/xCONTROL_STATE
log /tb/u_system/u_amber/u_decode/instruction_execute
log /tb/u_system/u_amber/u_decode/interrupt
log /tb/u_system/u_amber/u_decode/mtrans_num_registers
log /tb/u_system/u_amber/u_decode/pre_fetch_instruction_wen
log /tb/u_system/u_amber/u_decode/instruction
log /tb/u_system/u_amber/u_decode/instruction_valid
log /tb/u_system/u_amber/u_decode/saved_current_instruction_wen
log /tb/u_system/u_amber/u_decode/use_saved_current_instruction
log /tb/u_system/u_amber/u_decode/pc_wen_nxt
log /tb/u_system/u_amber/u_decode/write_pc
log /tb/u_system/u_amber/u_execute/execute
log /tb/u_system/u_amber/u_decode/u_decompile/xINSTRUCTION_EXECUTE
log /tb/u_system/u_amber/u_execute/i_pc_sel
log /tb/u_system/u_amber/u_execute/u_register_bank/r0
log /tb/u_system/u_amber/u_execute/u_register_bank/r1
log /tb/u_system/u_amber/u_execute/u_register_bank/r2
log /tb/u_system/u_amber/u_execute/u_register_bank/r3
log /tb/u_system/u_amber/u_execute/u_register_bank/r12_out
log /tb/u_system/u_amber/u_execute/u_register_bank/r13_out
log /tb/u_system/u_amber/u_execute/u_register_bank/r14_out
log /tb/u_system/u_amber/u_execute/pc_wen
log /tb/u_system/u_amber/u_execute/pc_nxt
log /tb/u_system/u_amber/u_execute/rn
log /tb/u_system/u_amber/u_execute/u_register_bank/r15
log /tb/u_system/u_amber/u_decode/instruction_execute
log /tb/u_system/u_amber/u_decode/pre_fetch_instruction
log /tb/u_system/u_amber/u_decode/u_decompile/xINSTRUCTION_EXECUTE
log /tb/u_system/u_amber/u_decode/xCONTROL_STATE
log /tb/u_system/u_amber/u_decode/xMODE
log /tb/u_system/u_amber/u_execute/i_pc_sel
log /tb/u_system/u_amber/u_decode/o_pc_wen
log /tb/u_system/u_amber/u_decode/u_decompile/execute_valid
log /tb/u_system/u_amber/u_execute/u_register_bank/r14_irq
log /tb/u_system/u_amber/u_execute/pc
log /tb/u_system/u_amber/u_execute/pc_wen
log /tb/u_system/u_amber/u_execute/i_pc_sel
log /tb/u_system/u_amber/u_execute/alu_out
log /tb/u_system/u_amber/u_execute/i_status_bits_flags_wen
log /tb/u_system/u_amber/u_execute/status_bits_flags
log /tb/u_system/u_amber/u_execute/i_status_bits_sel
log /tb/u_system/u_amber/u_execute/i_condition
log /tb/u_system/u_amber/u_execute/execute
log /tb/u_system/u_amber/o_wb_cyc
log /tb/u_system/u_amber/o_wb_stb
log /tb/u_system/u_amber/i_wb_ack
log /tb/u_system/u_amber/o_wb_dat
log /tb/u_system/u_amber/o_wb_sel
log /tb/u_system/u_amber/o_wb_we
log /tb/u_system/u_amber/i_wb_dat
log /tb/u_system/u_amber/i_wb_err
log /tb/u_system/u_amber/u_coprocessor/fault_address
log /tb/u_system/u_amber/u_coprocessor/fault_status
 
run -all
/trunk/hw/sim/run.do
1,3 → 1,104
# vcd file vcdtest.vcd
# vcd add /*
run -all

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.