URL
https://opencores.org/ocsvn/can/can/trunk
Subversion Repositories can
Compare Revisions
- This comparison shows the changes necessary to convert path
/can/tags/rel_20/syn
- from Rev 142 to Rev 161
- ↔ Reverse comparison
Rev 142 → Rev 161
/synplicity/can.prj
0,0 → 1,100
#-- Synplicity, Inc. |
#-- Version 7.2.2 |
#-- Project file X:\zoidberg_soc\zoidberg_soc\can\syn\synplicity\can.prj |
#-- Written on Tue Sep 23 14:15:42 2003 |
|
|
#add_file options |
add_file -verilog "$LIB/proasic/proasicplus.v" |
add_file -verilog "../../../memory/actel/ram_64x8_sync/actel_ram_64x8_sync.v" |
add_file -verilog "../../../memory/actel/ram_64x4_sync/actel_ram_64x4_sync.v" |
add_file -verilog "../../../memory/actel/ram_64x1_sync/actel_ram_64x1_sync.v" |
add_file -verilog "../../rtl/verilog/can_registers.v" |
add_file -verilog "../../rtl/verilog/can_bsp.v" |
add_file -verilog "../../rtl/verilog/can_btl.v" |
add_file -verilog "../../rtl/verilog/can_defines.v" |
add_file -verilog "../../rtl/verilog/can_register.v" |
add_file -verilog "../../rtl/verilog/can_register_asyn.v" |
add_file -verilog "../../rtl/verilog/can_register_asyn_syn.v" |
add_file -verilog "../../rtl/verilog/can_register_syn.v" |
add_file -verilog "../../rtl/verilog/can_top.v" |
add_file -verilog "../../rtl/verilog/can_fifo.v" |
add_file -verilog "../../rtl/verilog/can_acf.v" |
add_file -verilog "../../rtl/verilog/can_crc.v" |
add_file -verilog "../../rtl/verilog/can_ibo.v" |
|
|
#implementation: "rev_1" |
impl -add rev_1 |
|
#device options |
set_option -technology PA |
set_option -part APA150 |
set_option -speed_grade Std |
|
#compilation/mapping options |
set_option -default_enum_encoding default |
set_option -symbolic_fsm_compiler 1 |
set_option -resource_sharing 1 |
set_option -top_module "can_top" |
|
#map options |
set_option -frequency 50.000 |
set_option -fanout_limit 12 |
set_option -maxfan_hard 0 |
set_option -disable_io_insertion 0 |
set_option -report_path 4000 |
|
#simulation options |
set_option -write_verilog 0 |
set_option -write_vhdl 0 |
|
#automatic place and route (vendor) options |
set_option -write_apr_constraint 1 |
|
#set result format/file last |
project -result_file "rev_1/can_top.edn" |
|
#implementation attributes |
set_option -compiler_compatible 0 |
set_option -include_path "../../rtl/verilog/;../../bench/verilog/" |
|
|
#implementation: "rev_2" |
impl -add rev_2 |
|
#device options |
set_option -technology PA |
set_option -part APA600 |
set_option -speed_grade Std |
|
#compilation/mapping options |
set_option -default_enum_encoding default |
set_option -symbolic_fsm_compiler 1 |
set_option -resource_sharing 0 |
set_option -top_module "can_top" |
|
#map options |
set_option -frequency 50.000 |
set_option -fanout_limit 12 |
set_option -maxfan_hard 0 |
set_option -disable_io_insertion 0 |
set_option -report_path 4000 |
|
#simulation options |
set_option -write_verilog 1 |
set_option -write_vhdl 0 |
|
#automatic place and route (vendor) options |
set_option -write_apr_constraint 1 |
|
#set result format/file last |
project -result_file "rev_2/can_top.edn" |
|
#implementation attributes |
set_option -vlog_std v95 |
set_option -compiler_compatible 0 |
set_option -num_critical_paths "" |
set_option -num_startend_points "" |
set_option -include_path "../../rtl/verilog/;../../bench/verilog/" |
impl -active "rev_2" |
synplicity/can.prj
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: synplicity/rev_1/dir_keeper
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: synplicity/rev_1/dir_keeper
===================================================================
--- synplicity/rev_1/dir_keeper (nonexistent)
+++ synplicity/rev_1/dir_keeper (revision 161)
synplicity/rev_1/dir_keeper
Property changes :
Added: svn:mime-type
## -0,0 +1 ##
+application/octet-stream
\ No newline at end of property
Index: libero/pinedit.gcf
===================================================================
--- libero/pinedit.gcf (nonexistent)
+++ libero/pinedit.gcf (revision 161)
@@ -0,0 +1,5 @@
+set_io "H5" "clkout_o";
+set_io "M2" "tx_o";
+set_io "J1" "wb_rst_i";
+set_io "M3" "rx_i";
+set_io "H1" "clk_i";