OpenCores
URL https://opencores.org/ocsvn/eco32/eco32/trunk

Subversion Repositories eco32

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /eco32/trunk
    from Rev 131 to Rev 132
    ↔ Reverse comparison
  •

Rev 131 → Rev 132

/hwtests/serial/fpga2pc/receive.c
12,8 → 12,6
#include <termios.h>
 
 
#define SERIAL_PORT "/dev/ttyS0"
 
#define NUM_TRIES 10
 
#define SYN 0x16
49,10 → 47,10
}
 
 
void serialOpen(void) {
sfd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
void serialOpen(char *serialPort) {
sfd = open(serialPort, O_RDWR | O_NOCTTY | O_NDELAY);
if (sfd == -1) {
error("cannot open serial port '%s'", SERIAL_PORT);
error("cannot open serial port '%s'", serialPort);
}
tcgetattr(sfd, &origOptions);
currOptions = origOptions;
96,14 → 94,16
 
 
int main(int argc, char *argv[]) {
char *serialPort;
unsigned char prev, curr;
int count, errors;
 
if (argc != 1) {
printf("Usage: %s\n", argv[0]);
if (argc != 2) {
printf("Usage: %s <serial port>\n", argv[0]);
exit(1);
}
serialOpen();
serialPort = argv[1];
serialOpen(serialPort);
count = 0;
errors = 0;
while (!serialRcv(&prev)) ;
/hwtests/serial/fpga2pc/send1.s
8,7 → 8,7
; $11 counter
; $31 return address
 
.set tba,0xF0300010
.set tba,0xF0301000
 
add $8,$0,tba
add $11,$0,0
/hwtests/serial/pc2fpga/receive1.s
10,7 → 10,7
; $13 error
; $31 return address
 
.set tba,0xF0300010
.set tba,0xF0301000
 
add $8,$0,tba
add $12,$0,100000
/hwtests/serial/pc2fpga/send.c
12,8 → 12,6
#include <termios.h>
 
 
#define SERIAL_PORT "/dev/ttyS0"
 
#define NUM_TRIES 10
 
#define SYN 0x16
49,10 → 47,10
}
 
 
void serialOpen(void) {
sfd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
void serialOpen(char *serialPort) {
sfd = open(serialPort, O_RDWR | O_NOCTTY | O_NDELAY);
if (sfd == -1) {
error("cannot open serial port '%s'", SERIAL_PORT);
error("cannot open serial port '%s'", serialPort);
}
tcgetattr(sfd, &origOptions);
currOptions = origOptions;
96,14 → 94,16
 
 
int main(int argc, char *argv[]) {
char *serialPort;
unsigned char curr;
int count;
 
if (argc != 1) {
printf("Usage: %s\n", argv[0]);
if (argc != 2) {
printf("Usage: %s <serial port>\n", argv[0]);
exit(1);
}
serialOpen();
serialPort = argv[1];
serialOpen(serialPort);
curr = 0;
count = 0;
while (count < 100000) {
/hwtests/serial/sertest/echo1.s
2,7 → 2,7
; echo.s -- test the serial interface
;
 
.set sba,0xF0300010 ; serial base address
.set sba,0xF0301000 ; serial base address
 
add $8,$0,sba ; set serial base address
L1:
/hwtests/serial/sertest/sertest.c
12,8 → 12,6
#include <termios.h>
 
 
#define SERIAL_PORT "/dev/ttyS0"
 
#define NUM_TRIES 10
 
#define SYN 0x16
50,10 → 48,10
}
 
 
void serialOpen(void) {
sfd = open(SERIAL_PORT, O_RDWR | O_NOCTTY | O_NDELAY);
void serialOpen(char *serialPort) {
sfd = open(serialPort, O_RDWR | O_NOCTTY | O_NDELAY);
if (sfd == -1) {
error("cannot open serial port '%s'", SERIAL_PORT);
error("cannot open serial port '%s'", serialPort);
}
tcgetattr(sfd, &origOptions);
currOptions = origOptions;
127,13 → 125,15
 
 
int main(int argc, char *argv[]) {
char *serialPort;
int i;
 
if (argc != 1) {
printf("Usage: %s\n", argv[0]);
if (argc != 2) {
printf("Usage: %s <serial port>\n", argv[0]);
exit(1);
}
serialOpen();
serialPort = argv[1];
serialOpen(serialPort);
errors = 0;
for (i = 1; i <= 100; i++) {
block();

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.