OpenCores
URL https://opencores.org/ocsvn/lcd_block/lcd_block/trunk

Subversion Repositories lcd_block

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /lcd_block
    from Rev 2 to Rev 3
    ↔ Reverse comparison
  •

Rev 2 → Rev 3

/trunk/hdl/iseProject/_xmsgs/pn_parser.xmsgs
0,0 → 1,15
<?xml version="1.0" encoding="UTF-8"?>
<!-- IMPORTANT: This is an internal file that has been generated -->
<!-- by the Xilinx ISE software. Any direct editing or -->
<!-- changes made to this file may result in unpredictable -->
<!-- behavior or data corruption. It is strongly advised that -->
<!-- users do not edit the contents of this file. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
 
<messages>
<msg type="info" file="ProjectMgmt" num="1845" ><arg fmt="%s" index="1">Analyzing Verilog file &quot;E:/lcd_block/hdl/iseProject/lcd_wishbone_slave.v&quot; into library work</arg>
</msg>
 
</messages>
 
/trunk/hdl/iseProject/iseconfig/iseProject.projectmgr
0,0 → 1,58
<?xml version="1.0" encoding="utf-8"?>
<!--This is an ISE project configuration file.-->
<!--It holds project specific layout data for the projectmgr plugin.-->
<!--Copyright (c) 1995-2009 Xilinx, Inc. All rights reserved.-->
<Project version="2" owner="projectmgr" name="iseProject" >
<!--This is an ISE project configuration file.-->
<ItemView engineview="SynthesisOnly" guiview="Source" compilemode="AutoCompile" >
<ClosedNodes>
<ClosedNodesVersion>2</ClosedNodesVersion>
</ClosedNodes>
<SelectedItems>
<SelectedItem>Unassigned User Library Modules</SelectedItem>
</SelectedItems>
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000202000000010000000100000064000000e6000000020000000100000000000000000200000064ffffffff000000810000000300000002000000e60000000100000003000000000000000100000003</ViewHeaderState>
<UserChangedColumnWidths orientation="horizontal" >true</UserChangedColumnWidths>
<CurrentItem>Unassigned User Library Modules</CurrentItem>
</ItemView>
<ItemView engineview="SynthesisOnly" sourcetype="" guiview="Process" >
<ClosedNodes>
<ClosedNodesVersion>1</ClosedNodesVersion>
<ClosedNode>Design Utilities</ClosedNode>
</ClosedNodes>
<SelectedItems>
<SelectedItem></SelectedItem>
</SelectedItems>
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
<ViewHeaderState orientation="horizontal" >000000ff000000000000000100000001000000000000000000000000000000000000000000000000f6000000010000000100000000000000000000000064ffffffff000000810000000000000001000000f60000000100000000</ViewHeaderState>
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
<CurrentItem></CurrentItem>
</ItemView>
<ItemView guiview="File" >
<ClosedNodes>
<ClosedNodesVersion>1</ClosedNodesVersion>
</ClosedNodes>
<SelectedItems/>
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
<ViewHeaderState orientation="horizontal" >000000ff00000000000000010000000000000000010000000000000000000000000000000000000126000000040101000100000000000000000000000064ffffffff0000008100000000000000040000004200000001000000000000002400000001000000000000006600000001000000000000005a0000000100000000</ViewHeaderState>
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
<CurrentItem></CurrentItem>
</ItemView>
<ItemView guiview="Library" >
<ClosedNodes>
<ClosedNodesVersion>1</ClosedNodesVersion>
</ClosedNodes>
<SelectedItems/>
<ScrollbarPosition orientation="vertical" >0</ScrollbarPosition>
<ScrollbarPosition orientation="horizontal" >0</ScrollbarPosition>
<ViewHeaderState orientation="horizontal" >000000ff00000000000000010000000000000000010000000000000000000000000000000000000109000000010001000100000000000000000000000064ffffffff000000810000000000000001000001090000000100000000</ViewHeaderState>
<UserChangedColumnWidths orientation="horizontal" >false</UserChangedColumnWidths>
<CurrentItem>work</CurrentItem>
</ItemView>
<SourceProcessView>000000ff00000000000000020000011b0000011b01000000040100000002</SourceProcessView>
<CurrentView>Implementation</CurrentView>
</Project>
/trunk/hdl/iseProject/iseconfig/lcd_wishbone_slave.xreport
0,0 → 1,215
<?xml version='1.0' encoding='UTF-8'?>
<report-views version="2.0" >
<header>
<DateModified>2012-05-19T02:52:52</DateModified>
<ModuleName>lcd_wishbone_slave</ModuleName>
<SummaryTimeStamp>Unknown</SummaryTimeStamp>
<SavedFilePath>E:/lcd_block/hdl/iseProject/iseconfig/lcd_wishbone_slave.xreport</SavedFilePath>
<ImplementationReportsDirectory>E:/lcd_block/hdl/iseProject</ImplementationReportsDirectory>
<DateInitialized>2012-05-19T02:52:52</DateInitialized>
<EnableMessageFiltering>false</EnableMessageFiltering>
</header>
<body>
<viewgroup label="Design Overview" >
<view inputState="Unknown" program="implementation" ShowPartitionData="false" type="FPGASummary" file="lcd_wishbone_slave_summary.html" label="Summary" >
<toc-item title="Design Overview" target="Design Overview" />
<toc-item title="Design Utilization Summary" target="Design Utilization Summary" />
<toc-item title="Performance Summary" target="Performance Summary" />
<toc-item title="Failing Constraints" target="Failing Constraints" />
<toc-item title="Detailed Reports" target="Detailed Reports" />
</view>
<view inputState="Unknown" program="implementation" contextTags="FPGA_ONLY" hidden="true" type="HTML" file="lcd_wishbone_slave_envsettings.html" label="System Settings" />
<view inputState="Translated" program="map" locator="MAP_IOB_TABLE" contextTags="FPGA_ONLY" type="IOBProperties" file="lcd_wishbone_slave_map.xrpt" label="IOB Properties" />
<view inputState="Translated" program="map" contextTags="FPGA_ONLY" hidden="true" type="Control_Sets" file="lcd_wishbone_slave_map.xrpt" label="Control Set Information" />
<view inputState="Translated" program="map" locator="MAP_MODULE_HIERARCHY" contextTags="FPGA_ONLY" type="Module_Utilization" file="lcd_wishbone_slave_map.xrpt" label="Module Level Utilization" />
<view inputState="Mapped" program="par" locator="CONSTRAINT_TABLE" contextTags="FPGA_ONLY" type="ConstraintsData" file="lcd_wishbone_slave.ptwx" label="Timing Constraints" translator="ptwxToTableXML.xslt" />
<view inputState="Mapped" program="par" locator="PAR_PINOUT_BY_PIN_NUMBER" contextTags="FPGA_ONLY" type="PinoutData" file="lcd_wishbone_slave_par.xrpt" label="Pinout Report" />
<view inputState="Mapped" program="par" locator="PAR_CLOCK_TABLE" contextTags="FPGA_ONLY" type="ClocksData" file="lcd_wishbone_slave_par.xrpt" label="Clock Report" />
<view inputState="Mapped" program="par" contextTags="FPGA_ONLY,EDK_OFF" type="Timing_Analyzer" file="lcd_wishbone_slave.twx" label="Static Timing" />
<view inputState="Translated" program="cpldfit" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="EXTERNAL_HTML" file="lcd_wishbone_slave_html/fit/report.htm" label="CPLD Fitter Report" />
<view inputState="Fitted" program="taengine" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="EXTERNAL_HTML" file="lcd_wishbone_slave_html/tim/report.htm" label="CPLD Timing Report" />
</viewgroup>
<viewgroup label="XPS Errors and Warnings" >
<view program="platgen" WrapMessages="true" contextTags="EDK_ON" hidden="true" type="MessageList" hideColumns="Filtered" file="__xps/ise/_xmsgs/platgen.xmsgs" label="Platgen Messages" />
<view program="simgen" WrapMessages="true" contextTags="EDK_ON" hidden="true" type="MessageList" hideColumns="Filtered" file="__xps/ise/_xmsgs/simgen.xmsgs" label="Simgen Messages" />
<view program="bitinit" WrapMessages="true" contextTags="EDK_ON" hidden="true" type="MessageList" hideColumns="Filtered" file="__xps/ise/_xmsgs/bitinit.xmsgs" label="BitInit Messages" />
</viewgroup>
<viewgroup label="XPS Reports" >
<view inputState="PreSynthesized" program="platgen" contextTags="EDK_ON" hidden="true" type="Secondary_Report" file="platgen.log" label="Platgen Log File" />
<view inputState="PreSynthesized" program="simgen" contextTags="EDK_ON" hidden="true" type="Secondary_Report" file="simgen.log" label="Simgen Log File" />
<view inputState="PreSynthesized" program="bitinit" contextTags="EDK_ON" hidden="true" type="Secondary_Report" file="bitinit.log" label="BitInit Log File" />
<view inputState="PreSynthesized" program="system" contextTags="EDK_ON" hidden="true" type="Secondary_Report" file="lcd_wishbone_slave.log" label="System Log File" />
</viewgroup>
<viewgroup label="Errors and Warnings" >
<view program="pn" WrapMessages="true" contextTags="EDK_OFF" type="MessageList" hideColumns="Filtered, New" file="_xmsgs/pn_parser.xmsgs" label="Parser Messages" />
<view program="xst" WrapMessages="true" contextTags="XST_ONLY,EDK_OFF" hidden="false" type="MessageList" hideColumns="Filtered" file="_xmsgs/xst.xmsgs" label="Synthesis Messages" />
<view inputState="Synthesized" program="ngdbuild" WrapMessages="true" type="MessageList" hideColumns="Filtered" file="_xmsgs/ngdbuild.xmsgs" label="Translation Messages" />
<view inputState="Translated" program="map" WrapMessages="true" contextTags="FPGA_ONLY" type="MessageList" hideColumns="Filtered" file="_xmsgs/map.xmsgs" label="Map Messages" />
<view inputState="Mapped" program="par" WrapMessages="true" contextTags="FPGA_ONLY" type="MessageList" hideColumns="Filtered" file="_xmsgs/par.xmsgs" label="Place and Route Messages" />
<view inputState="Routed" program="trce" WrapMessages="true" contextTags="FPGA_ONLY" type="MessageList" hideColumns="Filtered" file="_xmsgs/trce.xmsgs" label="Timing Messages" />
<view inputState="Routed" program="xpwr" WrapMessages="true" contextTags="EDK_OFF" hidden="true" type="MessageList" hideColumns="Filtered" file="_xmsgs/xpwr.xmsgs" label="Power Messages" />
<view inputState="Routed" program="bitgen" WrapMessages="true" contextTags="FPGA_ONLY" type="MessageList" hideColumns="Filtered" file="_xmsgs/bitgen.xmsgs" label="Bitgen Messages" />
<view inputState="Translated" program="cpldfit" WrapMessages="true" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="MessageList" hideColumns="Filtered" file="_xmsgs/cpldfit.xmsgs" label="Fitter Messages" />
<view inputState="Current" program="implementation" WrapMessages="true" fileList="_xmsgs/xst.xmsgs,_xmsgs/ngdbuild.xmsgs,_xmsgs/map.xmsgs,_xmsgs/par.xmsgs,_xmsgs/trce.xmsgs,_xmsgs/xpwr.xmsgs,_xmsgs/bitgen.xmsgs" contextTags="FPGA_ONLY" type="MessageList" hideColumns="Filtered" file="_xmsgs/*.xmsgs" label="All Implementation Messages" />
<view inputState="Current" program="fitting" WrapMessages="true" fileList="_xmsgs/xst.xmsgs,_xmsgs/ngdbuild.xmsgs,_xmsgs/cpldfit.xmsgs,_xmsgs/xpwr.xmsgs" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="CPLD_MessageList" hideColumns="Filtered" file="_xmsgs/*.xmsgs" label="All Implementation Messages (CPLD)" />
</viewgroup>
<viewgroup label="Detailed Reports" >
<view program="xst" contextTags="XST_ONLY,EDK_OFF" hidden="false" type="Report" file="lcd_wishbone_slave.syr" label="Synthesis Report" >
<toc-item title="Top of Report" target="Copyright " searchDir="Forward" />
<toc-item title="Synthesis Options Summary" target=" Synthesis Options Summary " />
<toc-item title="HDL Compilation" target=" HDL Compilation " />
<toc-item title="Design Hierarchy Analysis" target=" Design Hierarchy Analysis " />
<toc-item title="HDL Analysis" target=" HDL Analysis " />
<toc-item title="HDL Parsing" target=" HDL Parsing " />
<toc-item title="HDL Elaboration" target=" HDL Elaboration " />
<toc-item title="HDL Synthesis" target=" HDL Synthesis " />
<toc-item title="HDL Synthesis Report" target="HDL Synthesis Report" searchCnt="2" searchDir="Backward" subItemLevel="1" />
<toc-item title="Advanced HDL Synthesis" target=" Advanced HDL Synthesis " searchDir="Backward" />
<toc-item title="Advanced HDL Synthesis Report" target="Advanced HDL Synthesis Report" subItemLevel="1" />
<toc-item title="Low Level Synthesis" target=" Low Level Synthesis " />
<toc-item title="Partition Report" target=" Partition Report " />
<toc-item title="Final Report" target=" Final Report " />
<toc-item title="Design Summary" target=" Design Summary " />
<toc-item title="Primitive and Black Box Usage" target="Primitive and Black Box Usage:" subItemLevel="1" />
<toc-item title="Device Utilization Summary" target="Device utilization summary:" subItemLevel="1" />
<toc-item title="Partition Resource Summary" target="Partition Resource Summary:" subItemLevel="1" />
<toc-item title="Timing Report" target="Timing Report" subItemLevel="1" />
<toc-item title="Clock Information" target="Clock Information" subItemLevel="2" />
<toc-item title="Asynchronous Control Signals Information" target="Asynchronous Control Signals Information" subItemLevel="2" />
<toc-item title="Timing Summary" target="Timing Summary" subItemLevel="2" />
<toc-item title="Timing Details" target="Timing Details" subItemLevel="2" />
<toc-item title="Cross Clock Domains Report" target="Cross Clock Domains Report:" subItemLevel="2" />
</view>
<view program="synplify" contextTags="SYNPLIFY_ONLY,EDK_OFF" hidden="true" type="Report" file="lcd_wishbone_slave.srr" label="Synplify Report" />
<view program="precision" contextTags="PRECISION_ONLY,EDK_OFF" hidden="true" type="Report" file="lcd_wishbone_slave.prec_log" label="Precision Report" />
<view inputState="Synthesized" program="ngdbuild" type="Report" file="lcd_wishbone_slave.bld" label="Translation Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Command Line" target="Command Line:" />
<toc-item title="Partition Status" target="Partition Implementation Status" />
<toc-item title="Final Summary" target="NGDBUILD Design Results Summary:" />
</view>
<view inputState="Translated" program="map" contextTags="FPGA_ONLY" type="Report" file="lcd_wishbone_slave_map.mrp" label="Map Report" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
<toc-item title="Section 1: Errors" target="Section 1 -" searchDir="Backward" />
<toc-item title="Section 2: Warnings" target="Section 2 -" searchDir="Backward" />
<toc-item title="Section 3: Infos" target="Section 3 -" searchDir="Backward" />
<toc-item title="Section 4: Removed Logic Summary" target="Section 4 -" searchDir="Backward" />
<toc-item title="Section 5: Removed Logic" target="Section 5 -" searchDir="Backward" />
<toc-item title="Section 6: IOB Properties" target="Section 6 -" searchDir="Backward" />
<toc-item title="Section 7: RPMs" target="Section 7 -" searchDir="Backward" />
<toc-item title="Section 8: Guide Report" target="Section 8 -" searchDir="Backward" />
<toc-item title="Section 9: Area Group and Partition Summary" target="Section 9 -" searchDir="Backward" />
<toc-item title="Section 10: Timing Report" target="Section 10 -" searchDir="Backward" />
<toc-item title="Section 11: Configuration String Details" target="Section 11 -" searchDir="Backward" />
<toc-item title="Section 12: Control Set Information" target="Section 12 -" searchDir="Backward" />
<toc-item title="Section 13: Utilization by Hierarchy" target="Section 13 -" searchDir="Backward" />
</view>
<view inputState="Mapped" program="par" contextTags="FPGA_ONLY" type="Report" file="lcd_wishbone_slave.par" label="Place and Route Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Device Utilization" target="Device Utilization Summary:" />
<toc-item title="Router Information" target="Starting Router" />
<toc-item title="Partition Status" target="Partition Implementation Status" />
<toc-item title="Clock Report" target="Generating Clock Report" />
<toc-item title="Timing Results" target="Timing Score:" />
<toc-item title="Final Summary" target="Peak Memory Usage:" />
</view>
<view inputState="Routed" program="trce" contextTags="FPGA_ONLY" type="Report" file="lcd_wishbone_slave.twr" label="Post-PAR Static Timing Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Timing Report Description" target="Device,package,speed:" />
<toc-item title="Informational Messages" target="INFO:" />
<toc-item title="Warning Messages" target="WARNING:" />
<toc-item title="Timing Constraints" target="Timing constraint:" />
<toc-item title="Derived Constraint Report" target="Derived Constraint Report" />
<toc-item title="Data Sheet Report" target="Data Sheet report:" />
<toc-item title="Timing Summary" target="Timing summary:" />
<toc-item title="Trace Settings" target="Trace Settings:" />
</view>
<view inputState="Translated" program="cpldfit" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="Report" file="lcd_wishbone_slave.rpt" label="CPLD Fitter Report (Text)" >
<toc-item title="Top of Report" target="cpldfit:" searchDir="Forward" />
<toc-item title="Resources Summary" target="** Mapped Resource Summary **" />
<toc-item title="Pin Resources" target="** Pin Resources **" />
<toc-item title="Global Resources" target="** Global Control Resources **" />
</view>
<view inputState="Fitted" program="taengine" contextTags="CPLD_ONLY,EDK_OFF" hidden="true" type="Report" file="lcd_wishbone_slave.tim" label="CPLD Timing Report (Text)" >
<toc-item title="Top of Report" target="Performance Summary Report" searchDir="Forward" />
<toc-item title="Performance Summary" target="Performance Summary:" />
</view>
<view inputState="Routed" program="xpwr" contextTags="EDK_OFF" type="Report" file="lcd_wishbone_slave.pwr" label="Power Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Power summary" target="Power summary" />
<toc-item title="Thermal summary" target="Thermal summary" />
</view>
<view inputState="Routed" program="bitgen" contextTags="FPGA_ONLY" type="Report" file="lcd_wishbone_slave.bgn" label="Bitgen Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Bitgen Options" target="Summary of Bitgen Options:" />
<toc-item title="Final Summary" target="DRC detected" />
</view>
</viewgroup>
<viewgroup label="Secondary Reports" >
<view inputState="PreSynthesized" program="isim" hidden="if_missing" type="Secondary_Report" file="isim.log" label="ISIM Simulator Log" />
<view inputState="Synthesized" program="netgen" hidden="if_missing" type="Secondary_Report" file="netgen/synthesis/lcd_wishbone_slave_synthesis.nlf" label="Post-Synthesis Simulation Model Report" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
</view>
<view inputState="Translated" program="netgen" hidden="if_missing" type="Secondary_Report" file="netgen/translate/lcd_wishbone_slave_translate.nlf" label="Post-Translate Simulation Model Report" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
</view>
<view inputState="Translated" program="netgen" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_tran_fecn.nlf" label="Post-Translate Formality Netlist Report" />
<view inputState="Translated" program="map" contextTags="FPGA_ONLY" hidden="true" type="Secondary_Report" file="lcd_wishbone_slave_map.map" label="Map Log File" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
<toc-item title="Design Information" target="Design Information" />
<toc-item title="Design Summary" target="Design Summary" />
</view>
<view inputState="Routed" program="smartxplorer" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="smartxplorer_results/smartxplorer.txt" label="SmartXplorer Report" />
<view inputState="Mapped" program="trce" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_preroute.twr" label="Post-Map Static Timing Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
<toc-item title="Timing Report Description" target="Device,package,speed:" />
<toc-item title="Informational Messages" target="INFO:" />
<toc-item title="Warning Messages" target="WARNING:" />
<toc-item title="Timing Constraints" target="Timing constraint:" />
<toc-item title="Derived Constraint Report" target="Derived Constraint Report" />
<toc-item title="Data Sheet Report" target="Data Sheet report:" />
<toc-item title="Timing Summary" target="Timing summary:" />
<toc-item title="Trace Settings" target="Trace Settings:" />
</view>
<view inputState="Mapped" program="netgen" hidden="if_missing" type="Secondary_Report" file="netgen/map/lcd_wishbone_slave_map.nlf" label="Post-Map Simulation Model Report" />
<view inputState="Mapped" program="map" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_map.psr" label="Physical Synthesis Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
</view>
<view inputState="Mapped" program="par" contextTags="FPGA_ONLY" hidden="true" type="Pad_Report" file="lcd_wishbone_slave_pad.txt" label="Pad Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
</view>
<view inputState="Mapped" program="par" contextTags="FPGA_ONLY" hidden="true" type="Secondary_Report" file="lcd_wishbone_slave.unroutes" label="Unroutes Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
</view>
<view inputState="Mapped" program="map" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_preroute.tsi" label="Post-Map Constraints Interaction Report" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
</view>
<view inputState="Mapped" program="par" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.grf" label="Guide Results Report" />
<view inputState="Routed" program="par" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.dly" label="Asynchronous Delay Report" />
<view inputState="Routed" program="par" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.clk_rgn" label="Clock Region Report" />
<view inputState="Routed" program="par" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.tsi" label="Post-Place and Route Constraints Interaction Report" >
<toc-item title="Top of Report" target="Copyright (c)" searchDir="Forward" />
</view>
<view inputState="Routed" program="netgen" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_par_fecn.nlf" label="Post-Place and Route Formality Netlist Report" />
<view inputState="Routed" program="netgen" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="netgen/par/lcd_wishbone_slave_timesim.nlf" label="Post-Place and Route Simulation Model Report" />
<view inputState="Routed" program="netgen" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave_sta.nlf" label="Primetime Netlist Report" >
<toc-item title="Top of Report" target="Release" searchDir="Forward" />
</view>
<view inputState="Routed" program="ibiswriter" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.ibs" label="IBIS Model" >
<toc-item title="Top of Report" target="IBIS Models for" searchDir="Forward" />
<toc-item title="Component" target="Component " />
</view>
<view inputState="Routed" program="pin2ucf" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.lck" label="Back-annotate Pin Report" >
<toc-item title="Top of Report" target="pin2ucf Report File" searchDir="Forward" />
<toc-item title="Constraint Conflicts Information" target="Constraint Conflicts Information" />
</view>
<view inputState="Routed" program="pin2ucf" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="lcd_wishbone_slave.lpc" label="Locked Pin Constraints" >
<toc-item title="Top of Report" target="top.lpc" searchDir="Forward" />
<toc-item title="Newly Added Constraints" target="The following constraints were newly added" />
</view>
<view inputState="Translated" program="netgen" contextTags="CPLD_ONLY,EDK_OFF" hidden="if_missing" type="Secondary_Report" file="netgen/fit/lcd_wishbone_slave_timesim.nlf" label="Post-Fit Simulation Model Report" />
<view inputState="Routed" program="bitgen" contextTags="FPGA_ONLY" hidden="if_missing" type="HTML" file="usage_statistics_webtalk.html" label="WebTalk Report" />
<view inputState="Routed" program="bitgen" contextTags="FPGA_ONLY" hidden="if_missing" type="Secondary_Report" file="webtalk.log" label="WebTalk Log File" />
</viewgroup>
</body>
</report-views>
/trunk/hdl/iseProject/lcd_wishbone_slave_summary.html
0,0 → 1,79
<HTML><HEAD><TITLE>Xilinx Design Summary</TITLE></HEAD>
<BODY TEXT='#000000' BGCOLOR='#FFFFFF' LINK='#0000EE' VLINK='#551A8B' ALINK='#FF0000'>
<TABLE BORDER CELLSPACING=0 CELLPADDING=3 WIDTH='100%'>
<TR ALIGN=CENTER BGCOLOR='#99CCFF'>
<TD ALIGN=CENTER COLSPAN='4'><B>lcd_wishbone_slave Project Status</B></TD></TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Project File:</B></TD>
<TD>iseProject.xise</TD>
<TD BGCOLOR='#FFFF99'><b>Parser Errors:</b></TD>
<TD> No Errors </TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Module Name:</B></TD>
<TD>lcd_wishbone_slave</TD>
<TD BGCOLOR='#FFFF99'><B>Implementation State:</B></TD>
<TD>New</TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Target Device:</B></TD>
<TD>xa7a8-2Icsg324</TD>
<TD BGCOLOR='#FFFF99'><UL><LI><B>Errors:</B></LI></UL></TD>
<TD>&nbsp;</TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Product Version:</B></TD><TD>ISE 13.4</TD>
<TD BGCOLOR='#FFFF99'><UL><LI><B>Warnings:</B></LI></UL></TD>
<TD>&nbsp;</TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Design Goal:</B></dif></TD>
<TD>Balanced</TD>
<TD BGCOLOR='#FFFF99'><UL><LI><B>Routing Results:</B></LI></UL></TD>
<TD>
&nbsp;</TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Design Strategy:</B></dif></TD>
<TD><A HREF_DISABLED='Xilinx Default (unlocked)?&DataKey=Strategy'>Xilinx Default (unlocked)</A></TD>
<TD BGCOLOR='#FFFF99'><UL><LI><B>Timing Constraints:</B></LI></UL></TD>
<TD>&nbsp;</TD>
</TR>
<TR ALIGN=LEFT>
<TD BGCOLOR='#FFFF99'><B>Environment:</B></dif></TD>
<TD>&nbsp;</TD>
<TD BGCOLOR='#FFFF99'><UL><LI><B>Final Timing Score:</B></LI></UL></TD>
<TD>&nbsp;&nbsp;</TD>
</TR>
</TABLE>
 
 
 
 
 
 
 
 
 
 
 
&nbsp;<BR><TABLE BORDER CELLSPACING=0 CELLPADDING=3 WIDTH='100%'>
<TR ALIGN=CENTER BGCOLOR='#99CCFF'><TD ALIGN=CENTER COLSPAN='6'><B>Detailed Reports</B></TD><TD ALIGN=RIGHT WIDTH='10%'COLSPAN=1> <A HREF_DISABLED="?&ExpandedTable=DetailedReports"><B>[-]</B></a></TD></TR>
<TR BGCOLOR='#FFFF99'><TD><B>Report Name</B></TD><TD><B>Status</B></TD><TD><B>Generated</B></TD>
<TD ALIGN=LEFT><B>Errors</B></TD><TD ALIGN=LEFT><B>Warnings</B></TD><TD ALIGN=LEFT COLSPAN='2'><B>Infos</B></TD></TR>
<TR ALIGN=LEFT><TD>Synthesis Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Translation Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Map Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Place and Route Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Power Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Post-PAR Static Timing Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
<TR ALIGN=LEFT><TD>Bitgen Report</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD>&nbsp;</TD><TD COLSPAN='2'>&nbsp;</TD></TR>
</TABLE>
&nbsp;<BR><TABLE BORDER CELLSPACING=0 CELLPADDING=3 WIDTH='100%'>
<TR ALIGN=CENTER BGCOLOR='#99CCFF'><TD ALIGN=CENTER COLSPAN='3'><B>Secondary Reports</B></TD><TD ALIGN=RIGHT WIDTH='10%'COLSPAN=1> <A HREF_DISABLED="?&ExpandedTable=SecondaryReports"><B>[-]</B></a></TD></TR>
<TR BGCOLOR='#FFFF99'><TD><B>Report Name</B></TD><TD><B>Status</B></TD><TD COLSPAN='2'><B>Generated</B></TD></TR>
</TABLE>
 
 
<br><center><b>Date Generated:</b> 05/19/2012 - 02:52:52</center>
</BODY></HTML>
/trunk/hdl/iseProject/iseProject.gise
0,0 → 1,28
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<generated_project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
 
<!-- -->
 
<!-- For tool use only. Do not edit. -->
 
<!-- -->
 
<!-- ProjectNavigator created generated project file. -->
 
<!-- For use in tracking generated file and other information -->
 
<!-- allowing preservation of process status. -->
 
<!-- -->
 
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
 
<version xmlns="http://www.xilinx.com/XMLSchema">11.1</version>
 
<sourceproject xmlns="http://www.xilinx.com/XMLSchema" xil_pn:fileType="FILE_XISE" xil_pn:name="iseProject.xise"/>
 
<files xmlns="http://www.xilinx.com/XMLSchema"/>
 
<transforms xmlns="http://www.xilinx.com/XMLSchema"/>
 
</generated_project>
/trunk/hdl/iseProject/iseProject.xise
0,0 → 1,346
<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<project xmlns="http://www.xilinx.com/XMLSchema" xmlns:xil_pn="http://www.xilinx.com/XMLSchema">
 
<header>
<!-- ISE source project file created by Project Navigator. -->
<!-- -->
<!-- This file contains project source information including a list of -->
<!-- project source files, project and process properties. This file, -->
<!-- along with the project source files, is sufficient to open and -->
<!-- implement in ISE Project Navigator. -->
<!-- -->
<!-- Copyright (c) 1995-2011 Xilinx, Inc. All rights reserved. -->
</header>
 
<version xil_pn:ise_version="13.4" xil_pn:schema_version="2"/>
 
<files/>
 
<properties>
<property xil_pn:name="AES Initial Vector virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unexpanded Blocks" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched LOC Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Unmatched Timing Group Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Analysis Effort Level" xil_pn:value="Standard" xil_pn:valueState="default"/>
<property xil_pn:name="Asynchronous To Synchronous" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Auto Implementation Top" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Reads Per Page" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Sync Mode" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bus Delimiter" xil_pn:value="&lt;>" xil_pn:valueState="default"/>
<property xil_pn:name="Case" xil_pn:value="Maintain" xil_pn:valueState="default"/>
<property xil_pn:name="Case Implementation Style" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To" xil_pn:value="-2I" xil_pn:valueState="default"/>
<property xil_pn:name="Change Device Speed To Post Trace" xil_pn:value="-2I" xil_pn:valueState="default"/>
<property xil_pn:name="Combinatorial Logic Optimization" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Compile EDK Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile SIMPRIM (Timing) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile UNISIM (Functional) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile XilinxCoreLib (CORE Generator) Simulation Library" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Init" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate virtex5" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Bit File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Create I/O Pads from Ports" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create IEEE 1532 Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Logic Allocation File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cycles for First BPI Page Read" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="DCI Update Mode" xil_pn:value="As Required" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Delay Values To Be Read from SDF" xil_pn:value="Setup Time" xil_pn:valueState="default"/>
<property xil_pn:name="Device" xil_pn:value="xa7a8" xil_pn:valueState="default"/>
<property xil_pn:name="Device Family" xil_pn:value="Automotive Artix7" xil_pn:valueState="default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-2I" xil_pn:valueState="default"/>
<property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Disable JTAG Connection" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream virtex6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select virtex6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map virtex6" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Fallback Reconfiguration virtex7" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Coregen" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language Schematic" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Architecture Only (No Entity Declaration)" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Asynchronous Delay Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Clock Region Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Constraints Interaction Report Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Datasheet Section Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Detailed MAP Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Multiple Hierarchical Netlist Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Power Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Post-Place &amp; Route Simulation Model" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate RTL Schematic" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Generate SAIF File for Power Optimization/Estimation Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Testbench File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="HMAC Key (Hex String)" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ICAP Select" xil_pn:value="Top" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Top" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Implementation Top Instance Path" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Include 'uselib Directive in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include SIMPRIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include UNISIM Models in Verilog File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Include sdf_annotate task in Verilog File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Incremental Compilation" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Insert Buffers to Prevent Pulse Swallowing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Instantiation Template Target Language Xps" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TCK" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG to XADC Connection" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Launch SDK after Export" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Library for Verilog Sources" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Load glbl" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile virtex7" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="32" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort virtex6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Other Bitgen Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Par" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compiler Options Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Compxlib Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Map Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other NETGEN Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Ngdbuild Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Place &amp; Route Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other Simulator Commands Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XPWR Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Other XST Command Line Options" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Output Extended Identifiers" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Output File Name" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Overwrite Compiled Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers into IOBs" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Pack I/O Registers/Latches into IOBs" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Package" xil_pn:value="csg324" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Perform Advanced Analysis Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Route Only" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream virtex7" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="_map.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="_timesim.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="_synthesis.v" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="_translate.v" xil_pn:valueState="default"/>
<property xil_pn:name="Power Down Device if Over Safe Temperature" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map virtex6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Project Description" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Property Specification in Project File" xil_pn:value="Store all values" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="RAM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering virtex6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Entity to" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Module To" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Fastest Path(s) in Each Constraint Post Trace" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Paths by Endpoint Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Type Post Trace" xil_pn:value="Verbose Report" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Report Unconstrained Paths Post Trace" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Reset On Configuration Pulse Width" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Resource Sharing" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Retain Hierarchy" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select" xil_pn:value="00" xil_pn:valueState="default"/>
<property xil_pn:name="Revision Select Tristate" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Run Design Rules Checker (DRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="SPI 32-bit Addressing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Map" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size virtex6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="Verilog" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Map" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Par" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time Translate" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
<property xil_pn:name="Simulator" xil_pn:value="ISim (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Slice Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Specify 'define Macro Name and Value" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Behavioral" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Map" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-2I" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Address for Fallback Configuration virtex7" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100)" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
<property xil_pn:name="Target Simulator" xil_pn:value="Please Specify" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Map" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Timing Mode Par" xil_pn:value="Performance Evaluation" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Module Name in Output Netlist" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Top-Level Source Type" xil_pn:value="HDL" xil_pn:valueState="default"/>
<property xil_pn:name="Trim Unconnected Signals" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Tristate On Configuration Pulse Width" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Unused IOB Pins" xil_pn:value="Pull Down" xil_pn:valueState="default"/>
<property xil_pn:name="Use 64-bit PlanAhead on 64-bit Systems" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use Clock Enable" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Route" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Project File Post-Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Behavioral" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Simulation Command File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Behav" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use SPI Falling Edge" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Access Register Value" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-93" xil_pn:valueState="default"/>
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCI Match (Output Events) virtex5" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for PLL Lock (Output Events) virtex6" xil_pn:value="No Wait" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Mode 7-series" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value 7-series" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<!-- -->
<!-- The following properties are for internal use only. These should not be modified.-->
<!-- -->
<property xil_pn:name="PROP_BehavioralSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_DesignName" xil_pn:value="iseProject" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_DevFamilyPMName" xil_pn:value="aartix7" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_FPGAConfiguration" xil_pn:value="FPGAConfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostMapSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostParSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostSynthSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PostXlateSimTop" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_PreSynthesis" xil_pn:value="PreSynthesis" xil_pn:valueState="default"/>
<property xil_pn:name="PROP_intProjectCreationTimestamp" xil_pn:value="2012-05-19T02:48:31" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWbtProjectID" xil_pn:value="9ED1F6C9CD464D97A1D4037501F78EBA" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirLocWRTProjDir" xil_pn:value="Same" xil_pn:valueState="non-default"/>
<property xil_pn:name="PROP_intWorkingDirUsed" xil_pn:value="No" xil_pn:valueState="non-default"/>
</properties>
 
<bindings/>
 
<libraries/>
 
<autoManagedFiles>
<!-- The following files are identified by `include statements in verilog -->
<!-- source files and are automatically managed by Project Navigator. -->
<!-- -->
<!-- Do not hand-edit this section, as it will be overwritten when the -->
<!-- project is analyzed based on files automatically identified as -->
<!-- include files. -->
</autoManagedFiles>
 
</project>
/trunk/hdl/iseProject/lcd_wishbone_slave.v
0,0 → 1,20
`timescale 1ns / 1ps
/*
Wishbone slave
(Verilog 2001)
*/
module lcd_wishbone_slave(
input RST_I,
input CLK_I,
input [1:0] ADR_I0,
input DAT_I0,
output [7:0] DAT_O0,
input WE_I,
input SEL_I0,
input STB_I,
output ACK_O,
input CYC_I
);
 
 
endmodule

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.