OpenCores
URL https://opencores.org/ocsvn/mjpeg-decoder/mjpeg-decoder/trunk

Subversion Repositories mjpeg-decoder

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /mjpeg-decoder/trunk/mjpeg
    from Rev 7 to Rev 8
    Reverse comparison

Rev 7 → Rev 8

/pcores/myipif/hdl/vhdl/jpeg_dezigzag.vhd
247,7 → 247,7
-- sr_out(02) <= sr_in(05);
-- sr_out(03) <= sr_in(06);
-- sr_out(04) <= sr_in(14);
-- sr_out(05) <= sr_in(17);
-- sr_out(05) <= sr_in(15);
-- sr_out(06) <= sr_in(27);
-- sr_out(07) <= sr_in(28);
-- sr_out(08) <= sr_in(02);
313,7 → 313,7
sr_out(16) <= sr_in(05);
sr_out(24) <= sr_in(06);
sr_out(32) <= sr_in(14);
sr_out(40) <= sr_in(17);
sr_out(40) <= sr_in(15);
sr_out(48) <= sr_in(27);
sr_out(56) <= sr_in(28);
sr_out(01) <= sr_in(02);
/etc/bitgen.ut
0,0 → 1,20
-g CclkPin:PULLUP
-g TdoPin:PULLNONE
-g M1Pin:PULLDOWN
-g DonePin:PULLUP
-g DriveDone:No
-g StartUpClk:JTAGCLK
-g DONE_cycle:4
-g GTS_cycle:5
-g M0Pin:PULLUP
-g M2Pin:PULLUP
-g ProgPin:PULLUP
-g TckPin:PULLUP
-g TdiPin:PULLUP
-g TmsPin:PULLUP
-g DonePipe:No
-g GWE_cycle:6
-g LCK_cycle:NoWait
-g Security:NONE
#-m
-g Persist:No
/etc/fast_runtime.opt
0,0 → 1,80
FLOWTYPE = FPGA;
###############################################################
## Filename: fast_runtime.opt
##
## Option File For Xilinx FPGA Implementation Flow for Fast
## Runtime.
##
## Version: 4.1.1
###############################################################
#
# Options for Translator
#
# Type "ngdbuild -h" for a detailed list of ngdbuild command line options
#
Program ngdbuild
-p <partname>; # Partname to use - picked from xflow commandline
-nt timestamp; # NGO File generation. Regenerate only when
# source netlist is newer than existing
# NGO file (default)
-bm <design>.bmm # Block RAM memory map file
<userdesign>; # User design - pick from xflow command line
-uc <design>.ucf; # ucf constraints
<design>.ngd; # Name of NGD file. Filebase same as design filebase
End Program ngdbuild
 
#
# Options for Mapper
#
# Type "map -h <arch>" for a detailed list of map command line options
#
Program map
-o <design>_map.ncd; # Output Mapped ncd file
-pr b; # Pack internal FF/latches into IOBs
#-fp <design>.mfp; # Floorplan file
<inputdir><design>.ngd; # Input NGD file
<inputdir><design>.pcf; # Physical constraints file
END Program map
 
#
# Options for Post Map Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_map_trce
-e 3; # Produce error report limited to 3 items per constraint
#-o <design>_map.twr; # Output trace report file
-xml <design>_map.twx; # Output XML version of the timing report
#-tsi <design>_map.tsi; # Produce Timing Specification Interaction report
<inputdir><design>_map.ncd; # Input mapped ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_map_trce
 
#
# Options for Place and Route
#
# Type "par -h" for a detailed list of par command line options
#
Program par
-w; # Overwrite existing placed and routed ncd
-ol std; # Overall effort level
<inputdir><design>_map.ncd; # Input mapped NCD file
<design>.ncd; # Output placed and routed NCD
<inputdir><design>.pcf; # Input physical constraints file
END Program par
 
#
# Options for Post Par Trace
#
# Type "trce -h" for a detailed list of trce command line options
#
Program post_par_trce
-e 3; # Produce error report limited to 3 items per constraint
#-o <design>.twr; # Output trace report file
-xml <design>.twx; # Output XML version of the timing report
#-tsi <design>.tsi; # Produce Timing Specification Interaction report
<inputdir><design>.ncd; # Input placed and routed ncd
<inputdir><design>.pcf; # Physical constraints file
END Program post_par_trce
 
 
/etc/download.cmd
0,0 → 1,6
setMode -bscan
setCable -p auto
identify
assignfile -p 3 -file implementation/download.bit
program -p 3
quit

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.