URL
https://opencores.org/ocsvn/mod_sim_exp/mod_sim_exp/trunk
Subversion Repositories mod_sim_exp
Compare Revisions
- This comparison shows the changes necessary to convert path
/mod_sim_exp/trunk/rtl/vhdl/core
- from Rev 2 to Rev 3
- ↔ Reverse comparison
Rev 2 → Rev 3
/std_logic_textio.vhd
File deleted
\ No newline at end of file
/autorun_cntrl.vhd
1,83 → 1,99
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: autorun_cntrl.vhd / entity autorun_cntrl |
-- |
-- Last Modified: 25/04/2012 |
-- |
-- Description: autorun control unit for a pipelined montgomery multiplier |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision 2.00 - Major bug fix: bit_counter should count from 15 downto 0. |
-- Revision 1.00 - Architecture created |
-- Revision 0.01 - File Created |
-- Additional Comments: |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
---------------------------------------------------------------------------------- |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- autorun_ctrl ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- autorun control unit for a pipelined montgomery ---- |
---- multiplier ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
|
entity autorun_cntrl is |
Port ( clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
start : in STD_LOGIC; |
done : out STD_LOGIC; |
op_sel : out STD_LOGIC_VECTOR (1 downto 0); |
start_multiplier : out STD_LOGIC; |
multiplier_done : in STD_LOGIC; |
read_buffer : out STD_LOGIC; |
buffer_din : in STD_LOGIC_VECTOR (31 downto 0); |
buffer_empty : in STD_LOGIC); |
port ( |
clk : in std_logic; |
reset : in std_logic; |
start : in std_logic; |
done : out std_logic; |
op_sel : out std_logic_vector (1 downto 0); |
start_multiplier : out std_logic; |
multiplier_done : in std_logic; |
read_buffer : out std_logic; |
buffer_din : in std_logic_vector (31 downto 0); |
buffer_empty : in std_logic |
); |
end autorun_cntrl; |
|
|
architecture Behavioral of autorun_cntrl is |
|
signal bit_counter_i : integer range 0 to 15 := 0; |
signal bit_counter_0_i : std_logic; |
signal bit_counter_15_i : std_logic; |
signal next_bit_i : std_logic := '0'; |
signal next_bit_del_i : std_logic; |
|
signal start_cycle_i : std_logic := '0'; |
signal start_cycle_del_i : std_logic; |
signal bit_counter_i : integer range 0 to 15 := 0; |
signal bit_counter_0_i : std_logic; |
signal bit_counter_15_i : std_logic; |
signal next_bit_i : std_logic := '0'; |
signal next_bit_del_i : std_logic; |
|
signal start_cycle_i : std_logic := '0'; |
signal start_cycle_del_i : std_logic; |
|
signal done_i : std_logic; |
signal start_i : std_logic; |
signal running_i : std_logic; |
|
signal start_multiplier_i : std_logic; |
signal start_multiplier_del_i : std_logic; |
signal mult_done_del_i : std_logic; |
|
signal e0_i : std_logic_vector(15 downto 0); |
signal e1_i : std_logic_vector(15 downto 0); |
signal e0_bit_i : std_logic; |
signal e1_bit_i : std_logic; |
signal e_bits_i : std_logic_vector(1 downto 0); |
signal e_bits_0_i : std_logic; |
signal cycle_counter_i : std_logic; |
signal op_sel_sel_i : std_logic; |
signal op_sel_i : std_logic_vector(1 downto 0); |
begin |
|
signal done_i : std_logic; |
signal start_i : std_logic; |
signal running_i : std_logic; |
|
signal start_multiplier_i : std_logic; |
signal start_multiplier_del_i : std_logic; |
signal mult_done_del_i : std_logic; |
|
signal e0_i : std_logic_vector(15 downto 0); |
signal e1_i : std_logic_vector(15 downto 0); |
signal e0_bit_i : std_logic; |
signal e1_bit_i : std_logic; |
signal e_bits_i : std_logic_vector(1 downto 0); |
signal e_bits_0_i : std_logic; |
signal cycle_counter_i : std_logic; |
signal op_sel_sel_i : std_logic; |
signal op_sel_i : std_logic_vector(1 downto 0); |
begin |
--done <= (multiplier_done and (not running_i)) or (start and buffer_empty); |
done <= done_i; |
|
-- the two exponents |
/cell_1b_adder.vhd
1,54 → 1,69
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: cell_1b_adder.vhd / entity cell_1b_adder |
-- |
-- Last Modified: 18/11/2011 |
-- |
-- Description: full adder for use in the montgommery multiplier systolic array |
-- currently a behavioral description |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision: |
-- Revision 2.00 - Major error resolved (carry & sum output were switched) |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- cell_1b_adder ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- This file contains the implementation of a 1-bit full ---- |
---- adder cell using logic gates ---- |
---- used in adder_block ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
|
entity cell_1b_adder is |
Port ( a : in STD_LOGIC; |
mux_result : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
port ( |
a : in std_logic; |
mux_result : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic |
); |
end cell_1b_adder; |
|
|
architecture Behavioral of cell_1b_adder is |
signal a_xor_mux_result: std_logic; |
signal a_xor_mux_result : std_logic; |
begin |
a_xor_mux_result <= a xor mux_result; |
r <= a_xor_mux_result xor cin; |
cout <= (a and mux_result) or (cin and a_xor_mux_result); |
a_xor_mux_result <= a xor mux_result; |
r <= a_xor_mux_result xor cin; |
cout <= (a and mux_result) or (cin and a_xor_mux_result); |
end Behavioral; |
|
/x_shift_reg.vhd
1,60 → 1,76
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: x_shift_reg.vhd / entity x_shift_reg |
-- |
-- Last Modified: 18/06/2012 |
-- |
-- Description: n-bit shift register with lsb output |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- x_shift_reg ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 1536 bit shift register with lsb output ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
|
entity x_shift_reg is |
generic( n : integer := 1536; |
t : integer := 48; |
tl : integer := 16 |
); |
port( clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
x_in : in STD_LOGIC_VECTOR((n-1) downto 0); |
load_x : in STD_LOGIC; |
next_x : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); |
x_i : out STD_LOGIC |
); |
generic( |
n : integer := 1536; |
t : integer := 48; |
tl : integer := 16 |
); |
port( |
clk : in std_logic; |
reset : in std_logic; |
x_in : in std_logic_vector((n-1) downto 0); |
load_x : in std_logic; |
next_x : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); |
x_i : out std_logic |
); |
end x_shift_reg; |
|
|
architecture Behavioral of x_shift_reg is |
signal x_reg_i : std_logic_vector((n-1) downto 0); -- register |
constant s : integer := n/t; -- nr of stages |
constant offset : integer := s*tl; -- calculate startbit pos of higher part of pipeline |
signal x_reg_i : std_logic_vector((n-1) downto 0); -- register |
constant s : integer := n/t; -- nr of stages |
constant offset : integer := s*tl; -- calculate startbit pos of higher part of pipeline |
begin |
|
|
REG_PROC: process(reset, clk) |
begin |
if reset = '1' then -- Reset, clear the register |
71,8 → 87,7
end process; |
|
with p_sel select -- pipeline select |
x_i <= x_reg_i(offset) when "10", -- use bit at offset for high part of pipeline |
x_reg_i(0) when others; -- use LS bit for lower part of pipeline |
x_i <= x_reg_i(offset) when "10", -- use bit at offset for high part of pipeline |
x_reg_i(0) when others; -- use LS bit for lower part of pipeline |
|
end Behavioral; |
|
/register_n.vhd
1,53 → 1,71
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: register_n.vhd / entity register_n |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: n bit register |
-- |
-- |
-- Dependencies: FDCE |
-- |
-- Revision: |
-- Revision 3.00 - Replaced LDCE primitive with FDCE primitive |
-- Revision 2.00 - Replaced behavioral architecture with structural using FPGA |
-- primitives. |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- register_n ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- n bit register ---- |
---- used in montgommery multiplier systolic array stages ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
-- Xilinx primitives used |
library UNISIM; |
use UNISIM.VComponents.all; |
|
|
entity register_n is |
generic( n : integer := 4 |
); |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC_VECTOR((n-1) downto 0); |
dout : out STD_LOGIC_VECTOR((n-1) downto 0) |
); |
generic( |
n : integer := 4 |
); |
port( |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
din : in std_logic_vector((n-1) downto 0); |
dout : out std_logic_vector((n-1) downto 0) |
); |
end register_n; |
|
|
architecture Structural of register_n is |
signal dout_i : std_logic_vector((n-1) downto 0) := (others => '0'); |
begin |
54,18 → 72,18
|
dout <= dout_i; |
|
N_REGS: for i in 0 to n-1 generate |
FDCE_inst : FDCE |
generic map ( |
INIT => '0') -- Initial value of latch ('0' or '1') |
port map ( |
Q => dout_i(i), -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din(i), -- Data input |
C => core_clk, -- Gate input |
CE => ce -- Gate enable input |
); |
end generate; |
N_REGS : for i in 0 to n-1 generate |
FDCE_inst : FDCE |
generic map ( |
INIT => '0' -- Initial value of latch ('0' or '1') |
) |
port map ( |
Q => dout_i(i), -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din(i), -- Data input |
C => core_clk, -- Gate input |
CE => ce -- Gate enable input |
); |
end generate; |
|
|
end Structural; |
end Structural; |
/cell_1b.vhd
1,88 → 1,94
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: cell_1b.vhd / entity cell_1b |
-- |
-- Last Modified: 14/11/2011 |
-- |
-- Description: cell for use in the montgommery multiplier systolic array |
-- |
-- |
-- Dependencies: cell_1b_adder |
-- cell_1b_mux |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- cel_1b ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 1 bit cell for use in the montgommery multiplier systolic ---- |
---- array ---- |
---- ---- |
---- Dependencies: ---- |
---- - cell_1bit_adder ---- |
---- - cell_1bit_mux ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity cell_1b is |
Port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
port ( |
my : in std_logic; |
y : in std_logic; |
m : in std_logic; |
x : in std_logic; |
q : in std_logic; |
a : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic |
); |
end cell_1b; |
|
|
architecture Structural of cell_1b is |
component cell_1b_mux |
Port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
result : out STD_LOGIC); |
end component; |
|
component cell_1b_adder |
Port ( a : in STD_LOGIC; |
mux_result : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
end component; |
|
signal mux2adder : std_logic; |
signal mux2adder : std_logic; |
begin |
|
cell_mux: cell_1b_mux |
port map( my => my, |
y => y, |
m => m, |
x => x, |
q => q, |
result => mux2adder |
); |
|
cell_adder: cell_1b_adder |
port map(a => a, |
mux_result => mux2adder, |
cin => cin, |
cout => cout, |
r => r |
); |
cell_mux : cell_1b_mux |
port map( |
my => my, |
y => y, |
m => m, |
x => x, |
q => q, |
result => mux2adder |
); |
|
end Structural; |
cell_adder : cell_1b_adder |
port map( |
a => a, |
mux_result => mux2adder, |
cin => cin, |
cout => cout, |
r => r |
); |
|
end Structural; |
/mont_ctrl.vhd
1,110 → 1,112
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: mont_ctrl.vhd / entity mont_ctrl |
-- |
-- Last Modified: 25/04/2012 |
-- |
-- Description: control unit for a pipelined montgomery multiplier, with split |
-- pipeline operation and "auto-run" support |
-- |
-- |
-- Dependencies: autorun_cntrl |
-- |
-- Revision: |
-- Revision 2.00 - Added autorun_control_logic |
-- Revision 1.00 - Architecture with support for single multiplication |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- mont_ctrl ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- control unit for a pipelined montgomery multiplier, with ---- |
---- split pipeline operation and "auto-run" support ---- |
---- ---- |
---- Dependencies: ---- |
---- - autorun_cntrl ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity mont_ctrl is |
port ( clk : in std_logic; --v |
reset : in std_logic; --v |
-- bus side |
start : in std_logic; --v |
--p_sel : in std_logic_vector(1 downto 0); |
x_sel_single : in std_logic_vector(1 downto 0); --v |
y_sel_single : in std_logic_vector(1 downto 0); --v |
run_auto : in std_logic; |
op_buffer_empty : in std_logic; |
op_sel_buffer : in std_logic_vector(31 downto 0); |
read_buffer : out std_logic; |
buffer_noread : in std_logic; |
done : out std_logic; |
calc_time : out std_logic; -- v |
-- multiplier side |
op_sel : out std_logic_vector(1 downto 0); --v |
load_x : out std_logic; -- v |
load_result : out std_logic; --v |
start_multiplier : out std_logic; -- v |
multiplier_ready : in std_logic |
|
port ( |
clk : in std_logic; |
reset : in std_logic; |
-- bus side |
start : in std_logic; |
x_sel_single : in std_logic_vector(1 downto 0); |
y_sel_single : in std_logic_vector(1 downto 0); |
run_auto : in std_logic; |
op_buffer_empty : in std_logic; |
op_sel_buffer : in std_logic_vector(31 downto 0); |
read_buffer : out std_logic; |
buffer_noread : in std_logic; |
done : out std_logic; |
calc_time : out std_logic; |
-- multiplier side |
op_sel : out std_logic_vector(1 downto 0); |
load_x : out std_logic; |
load_result : out std_logic; |
start_multiplier : out std_logic; |
multiplier_ready : in std_logic |
); |
end mont_ctrl; |
|
|
architecture Behavioral of mont_ctrl is |
signal start_delayed_i : std_logic; -- delayed version of start input |
signal start_pulse_i : std_logic; |
signal auto_start_pulse_i : std_logic; |
signal start_multiplier_i : std_logic; |
signal start_up_counter_i : std_logic_vector(2 downto 0):= "100"; -- used in op_sel at multiplier start |
signal auto_start_i : std_logic := '0'; |
signal store_autorun_i : std_logic; |
signal run_auto_i : std_logic; |
signal run_auto_stored_i : std_logic := '0'; |
signal single_start_pulse_i : std_logic; |
|
signal calc_time_i : std_logic; -- high ('1') during multiplication |
|
signal x_sel_i : std_logic_vector(1 downto 0); -- the operand used as x input |
signal y_sel_i : std_logic_vector(1 downto 0); -- the operand used as y input |
signal x_sel_buffer_i : std_logic_vector(1 downto 0); -- x operand as specified by fifo buffer (autorun) |
signal start_delayed_i : std_logic; -- delayed version of start input |
signal start_pulse_i : std_logic; |
signal auto_start_pulse_i : std_logic; |
signal start_multiplier_i : std_logic; |
signal start_up_counter_i : std_logic_vector(2 downto 0) := "100"; -- used in op_sel at multiplier start |
signal auto_start_i : std_logic := '0'; |
signal store_autorun_i : std_logic; |
signal run_auto_i : std_logic; |
signal run_auto_stored_i : std_logic := '0'; |
signal single_start_pulse_i : std_logic; |
|
signal auto_done_i : std_logic; |
signal start_auto_i : std_logic; |
signal new_buf_part_i : std_logic; |
signal new_buf_word_i : std_logic; |
signal buf_part_i : std_logic_vector(3 downto 0); |
signal pop_i : std_logic; |
signal start_autorun_cycle_i : std_logic; |
signal start_autorun_cycle_1_i : std_logic; |
signal autorun_counter_i : std_logic_vector(1 downto 0); |
signal part_counter_i : std_logic_vector(2 downto 0); |
signal auto_multiplier_done_i : std_logic; |
signal calc_time_i : std_logic; -- high ('1') during multiplication |
|
signal x_sel_i : std_logic_vector(1 downto 0); -- the operand used as x input |
signal y_sel_i : std_logic_vector(1 downto 0); -- the operand used as y input |
signal x_sel_buffer_i : std_logic_vector(1 downto 0); -- x operand as specified by fifo buffer (autorun) |
|
signal auto_done_i : std_logic; |
signal start_auto_i : std_logic; |
signal new_buf_part_i : std_logic; |
signal new_buf_word_i : std_logic; |
signal buf_part_i : std_logic_vector(3 downto 0); |
signal pop_i : std_logic; |
signal start_autorun_cycle_i : std_logic; |
signal start_autorun_cycle_1_i : std_logic; |
signal autorun_counter_i : std_logic_vector(1 downto 0); |
signal part_counter_i : std_logic_vector(2 downto 0); |
signal auto_multiplier_done_i : std_logic; |
|
COMPONENT autorun_cntrl |
PORT( |
clk : IN std_logic; |
reset : IN std_logic; |
start : IN std_logic; |
multiplier_done : IN std_logic; |
buffer_din : IN std_logic_vector(31 downto 0); |
buffer_empty : IN std_logic; |
done : OUT std_logic; |
op_sel : OUT std_logic_vector(1 downto 0); |
start_multiplier : OUT std_logic; |
read_buffer : OUT std_logic |
); |
END COMPONENT; |
begin |
|
----------------------------------------------------------------------------------- |
117,11 → 119,8
start_delayed_i <= start; |
end if; |
end process START_PULSE_PROC; |
--start_pulse_i <= store_autorun_i and (not run_auto_i); |
start_pulse_i <= start and (not start_delayed_i); |
single_start_pulse_i <= start_pulse_i and (not run_auto_i); |
--store_autorun_i <= (start and (not start_delayed_i)); |
--start_auto_i <= store_autorun_i and run_auto_i; |
start_auto_i <= start_pulse_i and run_auto_i; |
|
-- to start the multiplier we first need to select the y_operand and |
203,22 → 202,21
-- end if; |
-- end process STORE_AUTORUN_PROC; |
run_auto_i <= run_auto; |
--run_auto_i <= run_auto or run_auto_stored_i; |
|
|
-- multiplier_ready is only passed to autorun control when in autorun mode |
auto_multiplier_done_i <= (multiplier_ready and run_auto_i); |
autorun_control_logic: autorun_cntrl PORT MAP( |
clk => clk, |
reset => reset, |
start => start_auto_i, |
done => auto_done_i, |
op_sel => x_sel_buffer_i, |
start_multiplier => auto_start_pulse_i, |
multiplier_done => auto_multiplier_done_i, |
read_buffer => read_buffer, |
buffer_din => op_sel_buffer, |
buffer_empty => op_buffer_empty |
); |
|
autorun_control_logic : autorun_cntrl port map( |
clk => clk, |
reset => reset, |
start => start_auto_i, |
done => auto_done_i, |
op_sel => x_sel_buffer_i, |
start_multiplier => auto_start_pulse_i, |
multiplier_done => auto_multiplier_done_i, |
read_buffer => read_buffer, |
buffer_din => op_sel_buffer, |
buffer_empty => op_buffer_empty |
); |
|
end Behavioral; |
|
/mont_mult_sys_pipeline.vhd
1,278 → 1,251
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: mont_mult_sys_pipeline.vhd / entity mont_mult_sys_pipeline |
-- |
-- Last Modified: 18/06/2012 |
-- |
-- Description: n-bit montgomery multiplier with a pipelined systolic array |
-- |
-- |
-- Dependencies: systolic_pipeline |
-- adder_n |
-- cell_1b_adder |
-- x_shift_register |
-- |
-- Revision: |
-- Revision 3.00 - shift register for x selection in stead of decoding logic |
-- Revision 2.01 - Bug fix of the bug fix |
-- Revision 2.00 - Major bug fix in reduction logic (carry in upper part) |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- mont_mult_sys_pipline ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- n-bit montgomery multiplier with a pipelined systolic ---- |
---- array ---- |
---- ---- |
---- Dependencies: ---- |
---- - x_shift_reg ---- |
---- - adder_n ---- |
---- - d_flip_flop ---- |
---- - systolic_pipeline ---- |
---- - cell_1b_adder ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity mont_mult_sys_pipeline is |
generic ( n : integer := 1536; |
nr_stages : integer := 96; --(divides n, bits_low & (n-bits_low)) |
stages_low : integer := 32 |
); |
Port ( core_clk : in STD_LOGIC; |
xy : in STD_LOGIC_VECTOR((n-1) downto 0); |
m : in STD_LOGIC_VECTOR((n-1) downto 0); |
r : out STD_LOGIC_VECTOR((n-1) downto 0); |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); |
load_x : in std_logic; |
ready : out STD_LOGIC |
); |
generic ( |
n : integer := 1536; |
nr_stages : integer := 96; --(divides n, bits_low & (n-bits_low)) |
stages_low : integer := 32 |
); |
port ( |
core_clk : in std_logic; |
xy : in std_logic_vector((n-1) downto 0); |
m : in std_logic_vector((n-1) downto 0); |
r : out std_logic_vector((n-1) downto 0); |
start : in std_logic; |
reset : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); |
load_x : in std_logic; |
ready : out std_logic |
); |
end mont_mult_sys_pipeline; |
|
|
architecture Structural of mont_mult_sys_pipeline is |
component adder_n |
generic ( width : integer := 16; |
block_width : integer := 4 |
); |
Port ( core_clk : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
b : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
s : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
end component; |
|
component systolic_pipeline |
generic( n : integer := 1536; -- width of the operands (# bits) |
t : integer := 96; -- number of stages (divider of n) >= 2 |
tl: integer := 32 |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((n) downto 0); |
y : in STD_LOGIC_VECTOR((n-1) downto 0); |
m : in STD_LOGIC_VECTOR((n-1) downto 0); |
xi : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); |
ready : out STD_LOGIC; |
next_x : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((n+1) downto 0) |
); |
end component; |
|
component x_shift_reg |
generic( n : integer := 32; |
t : integer := 8; |
tl : integer := 3 |
); |
port( clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
x_in : in STD_LOGIC_VECTOR((n-1) downto 0); |
load_x : in STD_LOGIC; |
next_x : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); |
x_i : out STD_LOGIC |
); |
end component; |
|
component cell_1b_adder |
Port ( a : in STD_LOGIC; |
mux_result : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
end component; |
constant stage_width : integer := n/nr_stages; |
constant bits_l : integer := stage_width * stages_low; |
constant bits_h : integer := n - bits_l; |
|
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
signal my : std_logic_vector(n downto 0); |
signal my_h_cin : std_logic; |
signal my_l_cout : std_logic; |
signal r_pipeline : std_logic_vector(n+1 downto 0); |
signal r_red : std_logic_vector(n-1 downto 0); |
signal r_i : std_logic_vector(n-1 downto 0); |
signal c_red_l : std_logic_vector(2 downto 0); |
signal c_red_h : std_logic_vector(2 downto 0); |
signal cin_red_h : std_logic; |
signal r_sel : std_logic; |
signal reset_multiplier : std_logic; |
signal start_multiplier : std_logic; |
signal m_inv : std_logic_vector(n-1 downto 0); |
|
constant stage_width : integer := n/nr_stages; |
constant bits_l : integer := stage_width * stages_low; |
constant bits_h : integer := n - bits_l; |
|
signal my : std_logic_vector(n downto 0); |
signal my_h_cin : std_logic; |
signal my_l_cout : std_logic; |
signal r_pipeline : std_logic_vector(n+1 downto 0); |
signal r_red : std_logic_vector(n-1 downto 0); |
signal r_i : std_logic_vector(n-1 downto 0); |
signal c_red_l : std_logic_vector(2 downto 0); |
signal c_red_h : std_logic_vector(2 downto 0); |
signal cin_red_h : std_logic; |
signal r_sel : std_logic; |
signal reset_multiplier : std_logic; |
signal start_multiplier : std_logic; |
signal m_inv : std_logic_vector(n-1 downto 0); |
|
signal next_x_i : std_logic; |
signal x_i : std_logic; |
signal next_x_i : std_logic; |
signal x_i : std_logic; |
begin |
-- x selection |
x_selection: x_shift_reg |
generic map( n => n, |
t => nr_stages, |
tl => stages_low |
) |
port map(clk => core_clk, |
reset => reset, |
x_in => xy, |
load_x => load_x, |
next_x => next_x_i, |
p_sel => p_sel, |
x_i => x_i |
); |
|
-- precomputation of my (m+y) |
my_adder_l: adder_n |
generic map( width => bits_l, |
block_width => stage_width |
) |
port map( core_clk => core_clk, |
a => m((bits_l-1) downto 0), |
b => xy((bits_l-1) downto 0), |
cin => '0', |
cout => my_l_cout, |
s => my((bits_l-1) downto 0) |
); |
-- x selection |
x_selection : x_shift_reg |
generic map( |
n => n, |
t => nr_stages, |
tl => stages_low |
) |
port map( |
clk => core_clk, |
reset => reset, |
x_in => xy, |
load_x => load_x, |
next_x => next_x_i, |
p_sel => p_sel, |
x_i => x_i |
); |
|
-- precomputation of my (m+y) |
my_adder_l : adder_n |
generic map( |
width => bits_l, |
block_width => stage_width |
) |
port map( |
core_clk => core_clk, |
a => m((bits_l-1) downto 0), |
b => xy((bits_l-1) downto 0), |
cin => '0', |
cout => my_l_cout, |
s => my((bits_l-1) downto 0) |
); |
|
my_adder_h: adder_n |
generic map( width => bits_h, |
block_width => stage_width |
) |
port map( core_clk => core_clk, |
a => m((n-1) downto bits_l), |
b => xy((n-1) downto bits_l), |
cin => my_h_cin, |
cout => my(n), |
s => my((n-1) downto bits_l) |
); |
|
my_adder_h : adder_n |
generic map( |
width => bits_h, |
block_width => stage_width |
) |
port map( |
core_clk => core_clk, |
a => m((n-1) downto bits_l), |
b => xy((n-1) downto bits_l), |
cin => my_h_cin, |
cout => my(n), |
s => my((n-1) downto bits_l) |
); |
|
my_h_cin <= '0' when (p_sel(1) and (not p_sel(0)))='1' else my_l_cout; |
|
-- multiplication |
reset_multiplier <= reset or start; |
|
delay_1_cycle: d_flip_flop |
port map(core_clk => core_clk, |
reset => reset, |
din => start, |
dout => start_multiplier |
); |
|
delay_1_cycle : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => reset, |
din => start, |
dout => start_multiplier |
); |
|
the_multiplier: systolic_pipeline |
generic map( n => n, -- width of the operands (# bits) |
t => nr_stages, -- number of stages (divider of n) >= 2 |
tl => stages_low |
) |
port map(core_clk => core_clk, |
my => my, |
y => xy, |
m => m, |
xi => x_i, |
start => start_multiplier, |
reset => reset_multiplier, |
p_sel => p_sel, |
ready => ready, -- misschien net iets te vroeg? |
next_x => next_x_i, |
r => r_pipeline |
); |
the_multiplier : systolic_pipeline |
generic map( |
n => n, -- width of the operands (# bits) |
t => nr_stages, -- number of stages (divider of n) >= 2 |
tl => stages_low |
) |
port map( |
core_clk => core_clk, |
my => my, |
y => xy, |
m => m, |
xi => x_i, |
start => start_multiplier, |
reset => reset_multiplier, |
p_sel => p_sel, |
ready => ready, -- misschien net iets te vroeg? |
next_x => next_x_i, |
r => r_pipeline |
); |
|
-- post-computation (reduction) |
m_inv <= not(m); |
|
reduction_adder_l: adder_n |
generic map( width => bits_l, |
block_width => stage_width |
) |
port map( core_clk => core_clk, |
a => m_inv((bits_l-1) downto 0), |
b => r_pipeline((bits_l-1) downto 0), |
cin => '1', |
cout => c_red_l(0), |
s => r_red((bits_l-1) downto 0) |
); |
reduction_adder_l : adder_n |
generic map( |
width => bits_l, |
block_width => stage_width |
) |
port map( |
core_clk => core_clk, |
a => m_inv((bits_l-1) downto 0), |
b => r_pipeline((bits_l-1) downto 0), |
cin => '1', |
cout => c_red_l(0), |
s => r_red((bits_l-1) downto 0) |
); |
|
reduction_adder_l_a : cell_1b_adder |
port map( |
a => '1', |
mux_result => r_pipeline(bits_l), |
cin => c_red_l(0), |
cout => c_red_l(1) |
--r => |
); |
|
reduction_adder_l_b : cell_1b_adder |
port map( |
a => '1', |
mux_result => r_pipeline(bits_l+1), |
cin => c_red_l(1), |
cout => c_red_l(2) |
-- r => |
); |
|
reduction_adder_l_a: cell_1b_adder |
port map(a => '1', |
mux_result => r_pipeline(bits_l), |
cin => c_red_l(0), |
cout => c_red_l(1) |
--r => |
); |
|
reduction_adder_l_b: cell_1b_adder |
port map(a => '1', |
mux_result => r_pipeline(bits_l+1), |
cin => c_red_l(1), |
cout => c_red_l(2) |
-- r => |
); |
|
--cin_red_h <= p_sel(1) and (not p_sel(0)); |
cin_red_h <= c_red_l(0) when p_sel(0) = '1' else '1'; |
|
reduction_adder_h: adder_n |
generic map( width => bits_h, |
block_width => stage_width |
) |
port map( core_clk => core_clk, |
a => m_inv((n-1) downto bits_l), |
b => r_pipeline((n-1) downto bits_l), |
cin => cin_red_h, |
cout => c_red_h(0), |
s => r_red((n-1) downto bits_l) |
); |
|
reduction_adder_h_a: cell_1b_adder |
port map(a => '1', |
mux_result => r_pipeline(n), |
cin => c_red_h(0), |
cout => c_red_h(1) |
); |
|
reduction_adder_h_b: cell_1b_adder |
port map(a => '1', |
mux_result => r_pipeline(n+1), |
cin => c_red_h(1), |
cout => c_red_h(2) |
); |
reduction_adder_h : adder_n |
generic map( |
width => bits_h, |
block_width => stage_width |
) |
port map( |
core_clk => core_clk, |
a => m_inv((n-1) downto bits_l), |
b => r_pipeline((n-1) downto bits_l), |
cin => cin_red_h, |
cout => c_red_h(0), |
s => r_red((n-1) downto bits_l) |
); |
|
reduction_adder_h_a : cell_1b_adder |
port map( |
a => '1', |
mux_result => r_pipeline(n), |
cin => c_red_h(0), |
cout => c_red_h(1) |
); |
|
reduction_adder_h_b : cell_1b_adder |
port map( |
a => '1', |
mux_result => r_pipeline(n+1), |
cin => c_red_h(1), |
cout => c_red_h(2) |
); |
|
r_sel <= (c_red_h(2) and p_sel(1)) or (c_red_l(2) and (p_sel(0) and (not p_sel(1)))); |
r_i <= r_red when r_sel = '1' else r_pipeline((n-1) downto 0); |
|
/mod_sim_exp_pkg.vhd
0,0 → 1,436
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
|
package mod_sim_exp_pkg is |
|
component adder_n is |
generic ( |
width : integer := 1536; |
block_width : integer := 8 |
); |
port ( |
core_clk : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
b : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
s : out std_logic_vector((width-1) downto 0) |
); |
end component adder_n; |
|
component adder_block is |
generic ( |
width : integer := 32 |
); |
port ( |
core_clk : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
b : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
s : out std_logic_vector((width-1) downto 0) |
); |
end component adder_block; |
|
component autorun_cntrl is |
port ( |
clk : in std_logic; |
reset : in std_logic; |
start : in std_logic; |
done : out std_logic; |
op_sel : out std_logic_vector (1 downto 0); |
start_multiplier : out std_logic; |
multiplier_done : in std_logic; |
read_buffer : out std_logic; |
buffer_din : in std_logic_vector (31 downto 0); |
buffer_empty : in std_logic |
); |
end component autorun_cntrl; |
|
component cell_1b_adder is |
port ( |
a : in std_logic; |
mux_result : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic |
); |
end component cell_1b_adder; |
|
component cell_1b_mux is |
port ( |
my : in std_logic; |
y : in std_logic; |
m : in std_logic; |
x : in std_logic; |
q : in std_logic; |
result : out std_logic |
); |
end component cell_1b_mux; |
|
component cell_1b is |
port ( |
my : in std_logic; |
y : in std_logic; |
m : in std_logic; |
x : in std_logic; |
q : in std_logic; |
a : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic |
); |
end component cell_1b; |
|
component counter_sync is |
generic( |
max_value : integer := 1024 |
); |
port( |
reset_value : in integer; |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
overflow : out std_logic |
); |
end component counter_sync; |
|
component d_flip_flop is |
port( |
core_clk : in std_logic; |
reset : in std_logic; |
din : in std_logic; |
dout : out std_logic |
); |
end component d_flip_flop; |
|
component fifo_primitive is |
port ( |
clk : in std_logic; |
din : in std_logic_vector (31 downto 0); |
dout : out std_logic_vector (31 downto 0); |
empty : out std_logic; |
full : out std_logic; |
push : in std_logic; |
pop : in std_logic; |
reset : in std_logic; |
nopop : out std_logic; |
nopush : out std_logic |
); |
end component fifo_primitive; |
|
component first_stage is |
generic( |
width : integer := 16 -- must be the same as width of the standard stage |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width) downto 0); |
y : in std_logic_vector((width) downto 0); |
m : in std_logic_vector((width) downto 0); |
xin : in std_logic; |
xout : out std_logic; |
qout : out std_logic; |
a_msb : in std_logic; |
cout : out std_logic; |
start : in std_logic; |
reset : in std_logic; |
done : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end component first_stage; |
|
component last_stage is |
generic( |
width : integer := 16 -- must be the same as width of the standard stage |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-2) downto 0); |
m : in std_logic_vector((width-2) downto 0); |
xin : in std_logic; |
qin : in std_logic; |
cin : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
r : out std_logic_vector((width+1) downto 0) |
); |
end component last_stage; |
|
component modulus_ram is |
port( |
clk : in std_logic; |
modulus_addr : in std_logic_vector(5 downto 0); |
write_modulus : in std_logic; |
modulus_in : in std_logic_vector(31 downto 0); |
modulus_out : out std_logic_vector(1535 downto 0) |
); |
end component modulus_ram; |
|
component mont_ctrl is |
port ( |
clk : in std_logic; |
reset : in std_logic; |
-- bus side |
start : in std_logic; |
x_sel_single : in std_logic_vector(1 downto 0); |
y_sel_single : in std_logic_vector(1 downto 0); |
run_auto : in std_logic; |
op_buffer_empty : in std_logic; |
op_sel_buffer : in std_logic_vector(31 downto 0); |
read_buffer : out std_logic; |
buffer_noread : in std_logic; |
done : out std_logic; |
calc_time : out std_logic; |
-- multiplier side |
op_sel : out std_logic_vector(1 downto 0); |
load_x : out std_logic; |
load_result : out std_logic; |
start_multiplier : out std_logic; |
multiplier_ready : in std_logic |
); |
end component mont_ctrl; |
|
component mont_mult_sys_pipeline is |
generic ( |
n : integer := 1536; |
nr_stages : integer := 96; --(divides n, bits_low & (n-bits_low)) |
stages_low : integer := 32 |
); |
port ( |
core_clk : in std_logic; |
xy : in std_logic_vector((n-1) downto 0); |
m : in std_logic_vector((n-1) downto 0); |
r : out std_logic_vector((n-1) downto 0); |
start : in std_logic; |
reset : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); |
load_x : in std_logic; |
ready : out std_logic |
); |
end component mont_mult_sys_pipeline; |
|
component multiplier_core is |
port( |
clk : in std_logic; |
reset : in std_logic; |
-- operand memory interface (plb shared memory) |
write_enable : in std_logic; |
data_in : in std_logic_vector (31 downto 0); |
rw_address : in std_logic_vector (8 downto 0); |
data_out : out std_logic_vector (31 downto 0); |
collision : out std_logic; |
-- op_sel fifo interface |
fifo_din : in std_logic_vector (31 downto 0); |
fifo_push : in std_logic; |
fifo_full : out std_logic; |
fifo_nopush : out std_logic; |
-- ctrl signals |
start : in std_logic; |
run_auto : in std_logic; |
ready : out std_logic; |
x_sel_single : in std_logic_vector (1 downto 0); |
y_sel_single : in std_logic_vector (1 downto 0); |
dest_op_single : in std_logic_vector (1 downto 0); |
p_sel : in std_logic_vector (1 downto 0); |
calc_time : out std_logic |
); |
end component multiplier_core; |
|
component operand_dp is |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(5 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0); |
clkb : in std_logic; |
web : in std_logic_vector(0 downto 0); |
addrb : in std_logic_vector(5 downto 0); |
dinb : in std_logic_vector(511 downto 0); |
doutb : out std_logic_vector(31 downto 0) |
); |
end component operand_dp; |
|
component operand_mem is |
generic(n : integer := 1536 |
); |
port( |
-- data interface (plb side) |
data_in : in std_logic_vector(31 downto 0); |
data_out : out std_logic_vector(31 downto 0); |
rw_address : in std_logic_vector(8 downto 0); |
-- address structure: |
-- bit: 8 -> '1': modulus |
-- '0': operands |
-- bits: 7-6 -> operand_in_sel in case of bit 8 = '0' |
-- don't care in case of modulus |
-- bits: 5-0 -> modulus_addr / operand_addr resp. |
|
-- operand interface (multiplier side) |
op_sel : in std_logic_vector(1 downto 0); |
xy_out : out std_logic_vector(1535 downto 0); |
m : out std_logic_vector(1535 downto 0); |
result_in : in std_logic_vector(1535 downto 0); |
-- control signals |
load_op : in std_logic; |
load_m : in std_logic; |
load_result : in std_logic; |
result_dest_op : in std_logic_vector(1 downto 0); |
collision : out std_logic; |
-- system clock |
clk : in std_logic |
); |
end component operand_mem; |
|
component operand_ram is |
port( -- write_operand_ack voorzien? |
-- global ports |
clk : in std_logic; |
collision : out std_logic; |
-- bus side connections (32-bit serial) |
operand_addr : in std_logic_vector(5 downto 0); |
operand_in : in std_logic_vector(31 downto 0); |
operand_in_sel : in std_logic_vector(1 downto 0); |
result_out : out std_logic_vector(31 downto 0); |
write_operand : in std_logic; |
-- multiplier side connections (1536 bit parallel) |
result_dest_op : in std_logic_vector(1 downto 0); |
operand_out : out std_logic_vector(1535 downto 0); |
operand_out_sel : in std_logic_vector(1 downto 0); -- controlled by bus side |
write_result : in std_logic; |
result_in : in std_logic_vector(1535 downto 0) |
); |
end component operand_ram; |
|
component operands_sp is |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(4 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0) |
); |
end component operands_sp; |
|
component register_1b is |
port( |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
din : in std_logic; |
dout : out std_logic |
); |
end component register_1b; |
|
component register_n is |
generic( |
n : integer := 4 |
); |
port( |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
din : in std_logic_vector((n-1) downto 0); |
dout : out std_logic_vector((n-1) downto 0) |
); |
end component register_n; |
|
component standard_cell_block is |
generic ( |
width : integer := 16 |
); |
port ( |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-1) downto 0); |
m : in std_logic_vector((width-1) downto 0); |
x : in std_logic; |
q : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end component standard_cell_block; |
|
component standard_stage is |
generic( |
width : integer := 32 |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-1) downto 0); |
m : in std_logic_vector((width-1) downto 0); |
xin : in std_logic; |
qin : in std_logic; |
xout : out std_logic; |
qout : out std_logic; |
a_msb : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
start : in std_logic; |
reset : in std_logic; |
done : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end component standard_stage; |
|
component stepping_logic is |
generic( |
n : integer := 1536; -- max nr of steps required to complete a multiplication |
t : integer := 192 -- total nr of steps in the pipeline |
); |
port( |
core_clk : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
t_sel : in integer range 0 to t; -- nr of stages in the pipeline piece |
n_sel : in integer range 0 to n; -- nr of steps required for a complete multiplication |
start_first_stage : out std_logic; |
stepping_done : out std_logic |
); |
end component stepping_logic; |
|
component systolic_pipeline is |
generic( |
n : integer := 1536; -- width of the operands (# bits) |
t : integer := 192; -- number of stages (divider of n) >= 2 |
tl : integer := 64 -- best take t = sqrt(n) |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((n) downto 0); |
y : in std_logic_vector((n-1) downto 0); |
m : in std_logic_vector((n-1) downto 0); |
xi : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); -- select which piece of the multiplier will be used |
ready : out std_logic; |
next_x : out std_logic; |
r : out std_logic_vector((n+1) downto 0) |
); |
end component systolic_pipeline; |
|
component x_shift_reg is |
generic( |
n : integer := 1536; |
t : integer := 48; |
tl : integer := 16 |
); |
port( |
clk : in std_logic; |
reset : in std_logic; |
x_in : in std_logic_vector((n-1) downto 0); |
load_x : in std_logic; |
next_x : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); |
x_i : out std_logic |
); |
end component x_shift_reg; |
|
end package mod_sim_exp_pkg; |
/stepping_logic.vhd
1,95 → 1,88
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: stepping_logic.vhd / entity stepping_logic |
-- |
-- Last Modified: 23/01/2012 |
-- |
-- Description: stepping logic for the pipelined montgomery multiplier |
-- |
-- |
-- Dependencies: counter_sync |
-- |
-- Revision: |
-- Revision 5.01 - defined integer range for t_sel and n_sel resulting in less LUTs |
-- Revision 5.00 - made the reset value changeable in runtime |
-- Revision 4.01 - Delayed ready pulse with 1 clk cylce. This delay is necessary |
-- for the reduction to complete. |
-- Revision 4.00 - Changed design to fit new pipeline-architecture |
-- (i.e. 1 clock cycle / stage) |
-- Revision 3.00 - Removed second delay on next_x |
-- Revision 2.00 - Changed operation to give a pulse on stepping_done when pipeline |
-- operation has finished |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- stepping_logic ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- stepping logic for the pipelined montgomery multiplier ---- |
---- ---- |
---- Dependencies: ---- |
---- - d_flip_flop ---- |
---- - counter_sync ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity stepping_logic is |
generic( n : integer := 1536; -- max nr of steps required to complete a multiplication |
t : integer := 192 -- total nr of steps in the pipeline |
); |
port( core_clk : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
t_sel : in integer range 0 to t; -- nr of stages in the pipeline piece |
n_sel : in integer range 0 to n; -- nr of steps required for a complete multiplication |
start_first_stage : out STD_LOGIC; |
stepping_done : out STD_LOGIC |
); |
generic( |
n : integer := 1536; -- max nr of steps required to complete a multiplication |
t : integer := 192 -- total nr of steps in the pipeline |
); |
port( |
core_clk : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
t_sel : in integer range 0 to t; -- nr of stages in the pipeline piece |
n_sel : in integer range 0 to n; -- nr of steps required for a complete multiplication |
start_first_stage : out std_logic; |
stepping_done : out std_logic |
); |
end stepping_logic; |
|
|
architecture Behavioral of stepping_logic is |
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
|
component counter_sync |
generic(max_value : integer := 16 |
); |
port(reset_value : in integer; |
core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
overflow : out STD_LOGIC |
); |
end component; |
signal laststeps_in_i : std_logic := '0'; |
signal laststeps_out_i : std_logic := '0'; |
signal start_stop_in_i : std_logic := '0'; |
signal start_stop_out_i : std_logic := '0'; |
signal steps_in_i : std_logic := '0'; |
signal steps_out_i : std_logic := '0'; |
signal substeps_in_i : std_logic := '0'; |
signal substeps_out_i : std_logic := '0'; |
signal done_reg_in_i : std_logic := '0'; |
signal done_reg_out_i : std_logic := '0'; |
signal start_first_stage_i : std_logic := '0'; |
signal start_i : std_logic := '0'; |
|
signal laststeps_in_i : std_logic := '0'; |
signal laststeps_out_i : std_logic := '0'; |
signal start_stop_in_i : std_logic := '0'; |
signal start_stop_out_i : std_logic := '0'; |
signal steps_in_i : std_logic := '0'; |
signal steps_out_i : std_logic := '0'; |
signal substeps_in_i : std_logic := '0'; |
signal substeps_out_i : std_logic := '0'; |
signal done_reg_in_i : std_logic := '0'; |
signal done_reg_out_i : std_logic := '0'; |
signal start_first_stage_i : std_logic := '0'; |
signal start_i : std_logic := '0'; |
|
begin |
start_i <= start; |
|
106,51 → 99,59
start_first_stage_i <= start_i or steps_in_i; |
--start_first_stage_i <= steps_in_i; |
|
done_reg: d_flip_flop |
port map(core_clk => core_clk, |
reset => reset, |
din => done_reg_in_i, |
dout => done_reg_out_i |
); |
|
start_stop_reg: d_flip_flop |
port map(core_clk => core_clk, |
reset => reset, |
din => start_stop_in_i, |
dout => start_stop_out_i |
); |
|
-- for counting the last steps |
laststeps_counter: counter_sync |
generic map(max_value => t |
) |
port map(reset_value => t_sel, |
core_clk => core_clk, |
ce => laststeps_in_i, |
reset => reset, |
overflow => laststeps_out_i |
); |
|
-- counter for keeping track of the steps |
steps_counter: counter_sync |
generic map(max_value => n |
) |
port map(reset_value => (n_sel), |
core_clk => core_clk, |
ce => steps_in_i, |
reset => reset, |
overflow => steps_out_i |
); |
|
-- makes sure we don't start too early with a new step |
substeps_counter: counter_sync |
generic map(max_value => 2 |
) |
port map(reset_value => 2, |
core_clk => core_clk, |
ce => substeps_in_i, |
reset => reset, |
overflow => substeps_out_i |
); |
|
done_reg : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => reset, |
din => done_reg_in_i, |
dout => done_reg_out_i |
); |
|
start_stop_reg : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => reset, |
din => start_stop_in_i, |
dout => start_stop_out_i |
); |
|
-- for counting the last steps |
laststeps_counter : counter_sync |
generic map( |
max_value => t |
) |
port map( |
reset_value => t_sel, |
core_clk => core_clk, |
ce => laststeps_in_i, |
reset => reset, |
overflow => laststeps_out_i |
); |
|
-- counter for keeping track of the steps |
steps_counter : counter_sync |
generic map( |
max_value => n |
) |
port map( |
reset_value => (n_sel), |
core_clk => core_clk, |
ce => steps_in_i, |
reset => reset, |
overflow => steps_out_i |
); |
|
-- makes sure we don't start too early with a new step |
substeps_counter : counter_sync |
generic map( |
max_value => 2 |
) |
port map( |
reset_value => 2, |
core_clk => core_clk, |
ce => substeps_in_i, |
reset => reset, |
overflow => substeps_out_i |
); |
|
end Behavioral; |
/register_1b.vhd
1,48 → 1,68
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: register_1b.vhd / entity register_1b |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: 1 bit register |
-- |
-- |
-- Dependencies: LDCE |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- register_1b ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 1 bit register ---- |
---- used in montgommery multiplier systolic array stages ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
-- Xilinx primitives used |
library UNISIM; |
use UNISIM.VComponents.all; |
|
|
entity register_1b is |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
port( |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
din : in std_logic; |
dout : out std_logic |
); |
end register_1b; |
|
|
architecture Structural of register_1b is |
signal dout_i : std_logic; |
begin |
49,15 → 69,16
|
dout <= dout_i; |
|
FDCE_inst : FDCE |
generic map ( |
INIT => '0') -- Initial value of latch ('0' or '1') |
port map ( |
Q => dout_i, -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din, -- Data input |
C => core_clk, -- Gate input |
CE => ce -- Gate enable input |
); |
|
FDCE_inst : FDCE |
generic map ( |
INIT => '0' -- Initial value of latch ('0' or '1') |
) |
port map ( |
Q => dout_i, -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din, -- Data input |
C => core_clk, -- Gate input |
CE => ce -- Gate enable input |
); |
|
end Structural; |
/standard_cell_block.vhd
1,84 → 1,95
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: standard_cell_block.vhd / entity standard_cell_block |
-- |
-- Last Modified: 14/11/2011 |
-- |
-- Description: cell_block for use in the montgommery multiplier systolic array |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- standard_cell_block ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- a block of [width] cell_1b cells for use in the ---- |
---- montgommery multiplier systolic array ---- |
---- ---- |
---- Dependencies: ---- |
---- - cell_1b ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity standard_cell_block is |
generic ( width : integer := 16 |
); |
Port ( my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0)); |
generic ( |
width : integer := 16 |
); |
port ( |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-1) downto 0); |
m : in std_logic_vector((width-1) downto 0); |
x : in std_logic; |
q : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end standard_cell_block; |
|
|
architecture Structural of standard_cell_block is |
component cell_1b |
Port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
end component; |
|
signal carry : std_logic_vector(width downto 0); |
begin |
|
carry(0) <= cin; |
|
cell_block: for i in 0 to (width-1) generate |
cells: cell_1b |
port map( my => my(i), |
y => y(i), |
m => m(i), |
x => x, |
q => q, |
a => a(i), |
cin => carry(i), |
cout => carry(i+1), |
r => r(i) |
); |
end generate; |
cell_block : for i in 0 to (width-1) generate |
cells : cell_1b |
port map( |
my => my(i), |
y => y(i), |
m => m(i), |
x => x, |
q => q, |
a => a(i), |
cin => carry(i), |
cout => carry(i+1), |
r => r(i) |
); |
end generate; |
|
cout <= carry(width); |
end Structural; |
end Structural; |
/first_stage.vhd
1,152 → 1,104
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: first_stage.vhd / entity first_stage |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: first stage for use in the montgommery multiplier systolic |
-- array pipeline |
-- |
-- |
-- Dependencies: standard_cell_block |
-- cell_mux_1b |
-- register_n, |
-- register_1b, |
-- d_flip_flop |
-- |
-- Revision: |
-- Revision 4.00 - Removed input registers and used start signal as load_out_regs |
-- Revision 3.00 - Removed "a" input and replaced with "a_msb" (which is the only one |
-- that matters. |
-- Revision 2.02 - removed "ready" output signal |
-- Revision 2.01 - replaced the behavioral description of the registers with a |
-- component instantiation |
-- Revision 2.00 - added register to store input value xin (because this |
-- can change during operation) |
-- Revision 1.03 - added done pulse |
-- Revision 1.02 - appended "_i" to name of all internal signals |
-- Revision 1.01 - ready is '1' after reset |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- first_stage ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- first stage for use in the montgommery multiplier ---- |
---- systolic array pipeline ---- |
---- ---- |
---- Dependencies: ---- |
---- - standard_cell_block ---- |
---- - d_flip_flop ---- |
---- - register_n ---- |
---- - register_1b ---- |
---- - cell_1b_mux ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity first_stage is |
generic(width : integer := 16 -- must be the same as width of the standard stage |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width) downto 0); |
y : in STD_LOGIC_VECTOR((width) downto 0); |
m : in STD_LOGIC_VECTOR((width) downto 0); |
xin : in STD_LOGIC; |
xout : out STD_LOGIC; |
qout : out STD_LOGIC; |
a_msb : in STD_LOGIC; |
cout : out STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
-- ready : out STD_LOGIC; |
done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
generic( |
width : integer := 16 -- must be the same as width of the standard stage |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width) downto 0); |
y : in std_logic_vector((width) downto 0); |
m : in std_logic_vector((width) downto 0); |
xin : in std_logic; |
xout : out std_logic; |
qout : out std_logic; |
a_msb : in std_logic; |
cout : out std_logic; |
start : in std_logic; |
reset : in std_logic; |
done : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end first_stage; |
|
|
architecture Structural of first_stage is |
-- input |
signal xin_i : std_logic; |
signal a_msb_i : std_logic; |
|
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
-- output |
signal cout_i : std_logic; |
signal r_i : std_logic_vector((width-1) downto 0); |
signal cout_reg_i : std_logic; |
signal xout_reg_i : std_logic; |
signal qout_reg_i : std_logic; |
signal r_reg_i : std_logic_vector((width-1) downto 0); |
|
component register_1b |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
|
component register_n |
generic( n : integer := 4 |
); |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC_VECTOR((n-1) downto 0); |
dout : out STD_LOGIC_VECTOR((n-1) downto 0) |
); |
end component; |
-- interconnection |
signal q_i : std_logic; |
signal c_i : std_logic; |
signal first_res_i : std_logic; |
signal a_i : std_logic_vector((width) downto 0); |
|
component standard_cell_block |
generic ( width : integer := 32 |
); |
Port ( my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0)); |
end component; |
|
component cell_1b_mux |
port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
result : out STD_LOGIC); |
end component; |
|
-- input |
signal xin_i : std_logic; |
signal a_msb_i : std_logic; |
-- signal xin_reg_i : std_logic; |
-- signal a_msb_reg_i : std_logic; |
|
-- output |
signal cout_i : std_logic; |
signal r_i : std_logic_vector((width-1) downto 0); |
signal cout_reg_i : std_logic; |
signal xout_reg_i : std_logic; |
signal qout_reg_i : std_logic; |
signal r_reg_i : std_logic_vector((width-1) downto 0); |
|
-- interconnection |
signal q_i : std_logic; |
signal c_i : std_logic; |
signal first_res_i : std_logic; |
signal a_i : std_logic_vector((width) downto 0); |
|
-- control signals |
signal done_i : std_logic := '1'; |
--signal ready_del_i : std_logic := '1'; |
-- signal load_out_regs_i : std_logic; |
-- control signals |
signal done_i : std_logic := '1'; |
begin |
|
-- map inputs to internal signals |
159,113 → 111,86
cout <= cout_reg_i; |
qout <= qout_reg_i; |
xout <= xout_reg_i; |
-- two posibilities: |
--done <= ready_i and (not ready_del_i); -- slow |
--done <= not ready_i; -- faster but not sure if it will work (DONE_PROC can be omitted) |
|
-- a_i <= a_msb_reg_i & r_reg_i; |
a_i <= a_msb_i & r_reg_i; |
|
-- -- input registers |
-- A_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => a_msb_i, |
-- dout => a_msb_reg_i |
-- ); |
-- |
-- XIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => xin_i, |
-- dout => xin_reg_i |
-- ); |
|
-- compute first q_i and carry |
-- q_i <= a_i(0) xor (y(0) and xin_reg_i); |
q_i <= a_i(0) xor (y(0) and xin_i); |
c_i <= a_i(0) and first_res_i; |
|
first_cell: cell_1b_mux |
port map( my => my(0), |
y => y(0), |
m => m(0), |
-- x => xin_reg_i, |
x => xin_i, |
q => q_i, |
result => first_res_i |
); |
|
cell_block: standard_cell_block |
generic map( width => width |
) |
port map( my => my(width downto 1), |
y => y(width downto 1), |
m => m(width downto 1), |
-- x => xin_reg_i, |
x => xin_i, |
q => q_i, |
a => a_i(width downto 1), |
cin => c_i, |
cout => cout_i, |
r => r_i((width-1) downto 0) |
); |
|
-- delay_1_cycle: d_flip_flop |
-- port map(core_clk => core_clk, |
-- reset => reset, |
-- din => start, |
-- dout => load_out_regs_i |
-- ); |
|
done_signal: d_flip_flop |
port map(core_clk => core_clk, |
reset => reset, |
-- din => load_out_regs_i, |
din => start, |
dout => done_i |
); |
|
-- output registers |
RESULT_REG: register_n |
generic map( n => width |
) |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
XOUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
-- din => xin_reg_i, |
din => xin_i, |
dout => xout_reg_i |
); |
|
QOUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => q_i, |
dout => qout_reg_i |
); |
|
COUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => cout_i, |
dout => cout_reg_i |
); |
|
first_cell : cell_1b_mux |
port map( |
my => my(0), |
y => y(0), |
m => m(0), |
x => xin_i, |
q => q_i, |
result => first_res_i |
); |
|
cell_block : standard_cell_block |
generic map( |
width => width |
) |
port map( |
my => my(width downto 1), |
y => y(width downto 1), |
m => m(width downto 1), |
x => xin_i, |
q => q_i, |
a => a_i(width downto 1), |
cin => c_i, |
cout => cout_i, |
r => r_i((width-1) downto 0) |
); |
|
done_signal : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => reset, |
din => start, |
dout => done_i |
); |
|
-- output registers |
RESULT_REG : register_n |
generic map( |
n => width |
) |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
XOUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => xin_i, |
dout => xout_reg_i |
); |
|
QOUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => q_i, |
dout => qout_reg_i |
); |
|
COUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => cout_i, |
dout => cout_reg_i |
); |
|
|
end Structural; |
/counter_sync.vhd
1,52 → 1,67
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: counter_sync.vhd / entity counter_sync |
-- |
-- Last Modified: 23/01/2012 |
-- |
-- Description: counter with synchronous count enable. It generates an |
-- overflow when max_value is reached |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision: |
-- Revision 2.00 - moved max_value from generic to port so it is changeable in runtime |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- counter_sync ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- counter with synchronous count enable. It generates an ---- |
---- overflow when max_value is reached ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
|
entity counter_sync is |
generic(max_value : integer := 1024 |
); |
port(reset_value : in integer; |
core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
overflow : out STD_LOGIC |
); |
generic( |
max_value : integer := 1024 |
); |
port( |
reset_value : in integer; |
core_clk : in std_logic; |
ce : in std_logic; |
reset : in std_logic; |
overflow : out std_logic |
); |
end counter_sync; |
|
|
architecture Behavioral of counter_sync is |
|
signal overflow_i : std_logic := '0'; |
/fifo_primitive.vhd
1,53 → 1,73
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: adder_n.vhd / entity adder_n |
-- |
-- Last Modified: 04/04/2012 |
-- |
-- Description: 512x32-bit fifo |
-- |
-- |
-- Dependencies: FIFO18E1 primitive |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- fifo_primitive ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 512 x 32 bit fifo ---- |
---- ---- |
---- Dependencies: ---- |
---- - FIFO18E1 (xilinx primitive) ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
-- Xilinx primitives used in this code. |
library UNISIM; |
use UNISIM.VComponents.all; |
|
|
entity fifo_primitive is |
Port ( clk : in STD_LOGIC; |
din : in STD_LOGIC_VECTOR (31 downto 0); |
dout : out STD_LOGIC_VECTOR (31 downto 0); |
empty : out STD_LOGIC; |
full : out STD_LOGIC; |
push : in STD_LOGIC; |
pop : in STD_LOGIC; |
reset : in STD_LOGIC; |
nopop : out STD_LOGIC; |
nopush : out STD_LOGIC |
); |
port ( |
clk : in std_logic; |
din : in std_logic_vector (31 downto 0); |
dout : out std_logic_vector (31 downto 0); |
empty : out std_logic; |
full : out std_logic; |
push : in std_logic; |
pop : in std_logic; |
reset : in std_logic; |
nopop : out std_logic; |
nopush : out std_logic |
); |
end fifo_primitive; |
|
|
architecture Behavioral of fifo_primitive is |
signal rdcount : std_logic_vector(11 downto 0); -- debugging |
signal wrcount : std_logic_vector(11 downto 0); -- debugging |
90,7 → 110,7
DATA_WIDTH => 36, -- Sets data width to 4, 9, 18, or 36 |
DO_REG => 1, -- Enable output register (0 or 1) Must be 1 if EN_SYN = "FALSE" |
EN_SYN => TRUE, -- Specifies FIFO as dual-clock ("FALSE") or Synchronous ("TRUE") |
FIFO_MODE => "FIFO18_36", -- Sets mode to FIFO18 or FIFO18_36 |
FIFO_MODE => "FIFO18_36", -- Sets mode to FIFO18 or FIFO18_36 |
FIRST_WORD_FALL_THROUGH => FALSE, -- Sets the FIFO FWFT to "TRUE" or "FALSE" |
INIT => X"000000000", -- Initial values on output port |
SRVAL => X"000000000" -- Set/Reset value for output port |
103,22 → 123,21
EMPTY => empty_i, -- 1-bit empty output flag |
FULL => full_i, -- 1-bit full output flag |
-- WRCOUNT, RDCOUNT: 12-bit (each) FIFO pointers |
RDCOUNT => RDCOUNT, -- 12-bit read count output |
WRCOUNT => WRCOUNT, -- 12-bit write count output |
RDCOUNT => RDCOUNT, -- 12-bit read count output |
WRCOUNT => WRCOUNT, -- 12-bit write count output |
-- WRERR, RDERR: 1-bit (each) FIFO full or empty error |
RDERR => rderr_i, -- 1-bit read error output |
WRERR => wrerr_i, -- 1-bit write error |
DI => din, -- 32-bit data input |
DIP => "0000", -- 4-bit parity input |
RDEN => pop_i, -- 1-bit read enable input |
REGCE => '1', -- 1-bit clock enable input |
RST => reset_i, -- 1-bit reset input |
RSTREG => reset_i, -- 1-bit output register set/reset |
DI => din, -- 32-bit data input |
DIP => "0000", -- 4-bit parity input |
RDEN => pop_i, -- 1-bit read enable input |
REGCE => '1', -- 1-bit clock enable input |
RST => reset_i, -- 1-bit reset input |
RSTREG => reset_i, -- 1-bit output register set/reset |
-- WRCLK, RDCLK: 1-bit (each) Clocks |
RDCLK => clk, -- 1-bit read clock input |
WRCLK => clk, -- 1-bit write clock input |
RDCLK => clk, -- 1-bit read clock input |
WRCLK => clk, -- 1-bit write clock input |
WREN => push_i -- 1-bit write enable input |
); |
|
end Behavioral; |
|
/operand_dp.vhd
1,31 → 1,75
-------------------------------------------------------------------------------- |
-- This file is owned and controlled by Xilinx and must be used -- |
-- solely for design, simulation, implementation and creation of -- |
-- design files limited to Xilinx devices or technologies. Use -- |
-- with non-Xilinx devices or technologies is expressly prohibited -- |
-- and immediately terminates your license. -- |
-- -- |
-- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -- |
-- SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR -- |
-- XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION -- |
-- AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION -- |
-- OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS -- |
-- IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -- |
-- AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -- |
-- FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -- |
-- WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -- |
-- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -- |
-- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -- |
-- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- |
-- FOR A PARTICULAR PURPOSE. -- |
-- -- |
-- Xilinx products are not intended for use in life support -- |
-- appliances, devices, or systems. Use in such applications are -- |
-- expressly prohibited. -- |
-- -- |
-- (c) Copyright 1995-2009 Xilinx, Inc. -- |
-- All rights reserved. -- |
-------------------------------------------------------------------------------- |
---------------------------------------------------------------------- |
---- operand_dp ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 4 x 512 bit dual port ram for the operands ---- |
---- 32 bit read and write for bus side and 512 bit read and ---- |
---- write for multiplier side ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
---------------------------------------------------------------------- |
-- This file is owned and controlled by Xilinx and must be used -- |
-- solely for design, simulation, implementation and creation of -- |
-- design files limited to Xilinx devices or technologies. Use -- |
-- with non-Xilinx devices or technologies is expressly prohibited -- |
-- and immediately terminates your license. -- |
-- -- |
-- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -- |
-- SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR -- |
-- XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION -- |
-- AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION -- |
-- OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS -- |
-- IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -- |
-- AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -- |
-- FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -- |
-- WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -- |
-- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -- |
-- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -- |
-- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- |
-- FOR A PARTICULAR PURPOSE. -- |
-- -- |
-- Xilinx products are not intended for use in life support -- |
-- appliances, devices, or systems. Use in such applications are -- |
-- expressly prohibited. -- |
-- -- |
-- (c) Copyright 1995-2009 Xilinx, Inc. -- |
-- All rights reserved. -- |
---------------------------------------------------------------------- |
-- You must compile the wrapper file operand_dp.vhd when simulating |
-- the core, operand_dp. When compiling the wrapper file, be sure to |
-- reference the XilinxCoreLib VHDL simulation library. For detailed |
35,40 → 79,46
-- below are supported by Xilinx, Mentor Graphics and Synplicity |
-- synthesis tools. Ensure they are correct for your synthesis tool(s). |
|
LIBRARY ieee; |
USE ieee.std_logic_1164.ALL; |
|
library ieee; |
use ieee.std_logic_1164.ALL; |
-- synthesis translate_off |
Library XilinxCoreLib; |
library XilinxCoreLib; |
-- synthesis translate_on |
ENTITY operand_dp IS |
port ( |
clka: IN std_logic; |
wea: IN std_logic_VECTOR(0 downto 0); |
addra: IN std_logic_VECTOR(5 downto 0); |
dina: IN std_logic_VECTOR(31 downto 0); |
douta: OUT std_logic_VECTOR(511 downto 0); |
clkb: IN std_logic; |
web: IN std_logic_VECTOR(0 downto 0); |
addrb: IN std_logic_VECTOR(5 downto 0); |
dinb: IN std_logic_VECTOR(511 downto 0); |
doutb: OUT std_logic_VECTOR(31 downto 0)); |
END operand_dp; |
|
ARCHITECTURE operand_dp_a OF operand_dp IS |
|
entity operand_dp is |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(5 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0); |
clkb : in std_logic; |
web : in std_logic_vector(0 downto 0); |
addrb : in std_logic_vector(5 downto 0); |
dinb : in std_logic_vector(511 downto 0); |
doutb : out std_logic_vector(31 downto 0) |
); |
end operand_dp; |
|
|
architecture operand_dp_a of operand_dp is |
-- synthesis translate_off |
component wrapped_operand_dp |
port ( |
clka: IN std_logic; |
wea: IN std_logic_VECTOR(0 downto 0); |
addra: IN std_logic_VECTOR(5 downto 0); |
dina: IN std_logic_VECTOR(31 downto 0); |
douta: OUT std_logic_VECTOR(511 downto 0); |
clkb: IN std_logic; |
web: IN std_logic_VECTOR(0 downto 0); |
addrb: IN std_logic_VECTOR(5 downto 0); |
dinb: IN std_logic_VECTOR(511 downto 0); |
doutb: OUT std_logic_VECTOR(31 downto 0)); |
end component; |
component wrapped_operand_dp |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(5 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0); |
clkb : in std_logic; |
web : in std_logic_vector(0 downto 0); |
addrb : in std_logic_vector(5 downto 0); |
dinb : in std_logic_vector(511 downto 0); |
doutb : out std_logic_vector(31 downto 0) |
); |
end component; |
|
-- Configuration specification |
for all : wrapped_operand_dp use entity XilinxCoreLib.blk_mem_gen_v3_3(behavioral) |
122,23 → 172,24
c_use_byte_wea => 0, |
c_rst_priority_b => "CE", |
c_rst_priority_a => "CE", |
c_use_default_data => 0); |
c_use_default_data => 0 |
); |
-- synthesis translate_on |
BEGIN |
begin |
-- synthesis translate_off |
U0 : wrapped_operand_dp |
port map ( |
clka => clka, |
wea => wea, |
addra => addra, |
dina => dina, |
douta => douta, |
clkb => clkb, |
web => web, |
addrb => addrb, |
dinb => dinb, |
doutb => doutb); |
U0 : wrapped_operand_dp |
port map ( |
clka => clka, |
wea => wea, |
addra => addra, |
dina => dina, |
douta => douta, |
clkb => clkb, |
web => web, |
addrb => addrb, |
dinb => dinb, |
doutb => doutb |
); |
-- synthesis translate_on |
|
END operand_dp_a; |
|
end operand_dp_a; |
/d_flip_flop.vhd
1,62 → 1,80
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: d_flip_flop.vhd / entity d_flip_flop |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: 1 bit D flip-flop |
-- |
-- |
-- Dependencies: LDCE |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- d_flip_flop ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 1 bit D flip-flop currently still uses primitives ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
library UNISIM; |
use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
-- Xilinx primitives used |
library unisim; |
use unisim.vcomponents.all; |
|
|
entity d_flip_flop is |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
port( |
core_clk : in std_logic; |
reset : in std_logic; |
din : in std_logic; |
dout : out std_logic |
); |
end d_flip_flop; |
|
|
architecture Structural of d_flip_flop is |
signal dout_i : std_logic; |
signal dout_i : std_logic; |
begin |
|
dout <= dout_i; |
|
FDCE_inst : FDCE |
generic map ( |
INIT => '0') -- Initial value of latch ('0' or '1') |
port map ( |
Q => dout_i, -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din, -- Data input |
C => core_clk, -- Gate input |
CE => '1' -- Gate enable input |
); |
|
end Structural; |
|
dout <= dout_i; |
|
FDCE_inst : FDCE |
generic map ( |
INIT => '0') -- Initial value of latch ('0' or '1') |
port map ( |
Q => dout_i, -- Data output |
CLR => reset, -- Asynchronous clear/reset input |
D => din, -- Data input |
C => core_clk, -- Gate input |
CE => '1' -- Gate enable input |
); |
|
end Structural; |
/operands_sp.vhd
1,33 → 1,76
-------------------------------------------------------------------------------- |
-- This file is owned and controlled by Xilinx and must be used -- |
-- solely for design, simulation, implementation and creation of -- |
-- design files limited to Xilinx devices or technologies. Use -- |
-- with non-Xilinx devices or technologies is expressly prohibited -- |
-- and immediately terminates your license. -- |
-- -- |
-- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -- |
-- SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR -- |
-- XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION -- |
-- AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION -- |
-- OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS -- |
-- IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -- |
-- AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -- |
-- FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -- |
-- WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -- |
-- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -- |
-- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -- |
-- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- |
-- FOR A PARTICULAR PURPOSE. -- |
-- -- |
-- Xilinx products are not intended for use in life support -- |
-- appliances, devices, or systems. Use in such applications are -- |
-- expressly prohibited. -- |
-- -- |
-- (c) Copyright 1995-2009 Xilinx, Inc. -- |
-- All rights reserved. -- |
-------------------------------------------------------------------------------- |
-- You must compile the wrapper file operands_sp.vhd when simulating |
-- the core, operands_sp. When compiling the wrapper file, be sure to |
---------------------------------------------------------------------- |
---- operands_sp ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- 512 bit single port ram for the modulus ---- |
---- 32 write for bus side and 512 bit read for multplier side ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
---------------------------------------------------------------------- |
-- This file is owned and controlled by Xilinx and must be used -- |
-- solely for design, simulation, implementation and creation of -- |
-- design files limited to Xilinx devices or technologies. Use -- |
-- with non-Xilinx devices or technologies is expressly prohibited -- |
-- and immediately terminates your license. -- |
-- -- |
-- XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" -- |
-- SOLELY FOR USE IN DEVELOPING PROGRAMS AND SOLUTIONS FOR -- |
-- XILINX DEVICES. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION -- |
-- AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION -- |
-- OR STANDARD, XILINX IS MAKING NO REPRESENTATION THAT THIS -- |
-- IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT, -- |
-- AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE -- |
-- FOR YOUR IMPLEMENTATION. XILINX EXPRESSLY DISCLAIMS ANY -- |
-- WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE -- |
-- IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR -- |
-- REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF -- |
-- INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -- |
-- FOR A PARTICULAR PURPOSE. -- |
-- -- |
-- Xilinx products are not intended for use in life support -- |
-- appliances, devices, or systems. Use in such applications are -- |
-- expressly prohibited. -- |
-- -- |
-- (c) Copyright 1995-2009 Xilinx, Inc. -- |
-- All rights reserved. -- |
---------------------------------------------------------------------- |
-- You must compile the wrapper file operand_dp.vhd when simulating |
-- the core, operand_dp. When compiling the wrapper file, be sure to |
-- reference the XilinxCoreLib VHDL simulation library. For detailed |
-- instructions, please refer to the "CORE Generator Help". |
|
35,30 → 78,36
-- below are supported by Xilinx, Mentor Graphics and Synplicity |
-- synthesis tools. Ensure they are correct for your synthesis tool(s). |
|
LIBRARY ieee; |
USE ieee.std_logic_1164.ALL; |
|
library ieee; |
use ieee.std_logic_1164.all; |
-- synthesis translate_off |
Library XilinxCoreLib; |
library XilinxCoreLib; |
-- synthesis translate_on |
ENTITY operands_sp IS |
port ( |
clka: IN std_logic; |
wea: IN std_logic_VECTOR(0 downto 0); |
addra: IN std_logic_VECTOR(4 downto 0); |
dina: IN std_logic_VECTOR(31 downto 0); |
douta: OUT std_logic_VECTOR(511 downto 0)); |
END operands_sp; |
|
ARCHITECTURE operands_sp_a OF operands_sp IS |
|
entity operands_sp is |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(4 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0) |
); |
end operands_sp; |
|
|
architecture operands_sp_a of operands_sp is |
-- synthesis translate_off |
component wrapped_operands_sp |
port ( |
clka: IN std_logic; |
wea: IN std_logic_VECTOR(0 downto 0); |
addra: IN std_logic_VECTOR(4 downto 0); |
dina: IN std_logic_VECTOR(31 downto 0); |
douta: OUT std_logic_VECTOR(511 downto 0)); |
end component; |
component wrapped_operands_sp |
port ( |
clka : in std_logic; |
wea : in std_logic_vector(0 downto 0); |
addra : in std_logic_vector(4 downto 0); |
dina : in std_logic_vector(31 downto 0); |
douta : out std_logic_vector(511 downto 0) |
); |
end component; |
|
-- Configuration specification |
for all : wrapped_operands_sp use entity XilinxCoreLib.blk_mem_gen_v3_3(behavioral) |
112,18 → 161,20
c_use_byte_wea => 0, |
c_rst_priority_b => "CE", |
c_rst_priority_a => "CE", |
c_use_default_data => 0); |
c_use_default_data => 0 |
); |
-- synthesis translate_on |
BEGIN |
|
begin |
-- synthesis translate_off |
U0 : wrapped_operands_sp |
port map ( |
clka => clka, |
wea => wea, |
addra => addra, |
dina => dina, |
douta => douta); |
u0 : wrapped_operands_sp |
port map ( |
clka => clka, |
wea => wea, |
addra => addra, |
dina => dina, |
douta => douta |
); |
-- synthesis translate_on |
|
END operands_sp_a; |
|
end operands_sp_a; |
/standard_stage.vhd
1,145 → 1,106
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: standard_stage.vhd / entity standard_stage |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: standard stage for use in the montgommery multiplier systolic |
-- array pipeline |
-- |
-- |
-- Dependencies: standard_cell_block, |
-- register_n, |
-- register_1b, |
-- d_flip_flop |
-- |
-- Revision: |
-- Revision 4.00 - Removed input registers and used start signal as load_out_regs |
-- Revision 3.00 - Removed "a" input and replaced with "a_msb" (which is the only one |
-- that matters. |
-- Revision 2.02 - removed "ready" output signal |
-- Revision 2.01 - replaced the behavioral description of the registers with a |
-- component instantiation |
-- Revision 2.00 - added registers to store input values xin, cin, qin (because they |
-- can change during operation) |
-- Revision 1.03 - added done pulse |
-- Revision 1.02 - appended "_i" to name of all internal signals |
-- Revision 1.01 - ready is '1' after reset |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- standard_stage ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- standard stage for use in the montgommery multiplier ---- |
---- systolic array pipeline ---- |
---- ---- |
---- Dependencies: ---- |
---- - standard_cell_block ---- |
---- - d_flip_flop ---- |
---- - register_n ---- |
---- - register_1b ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity standard_stage is |
generic(width : integer := 32 |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
xin : in STD_LOGIC; |
qin : in STD_LOGIC; |
xout : out STD_LOGIC; |
qout : out STD_LOGIC; |
a_msb : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
-- ready : out STD_LOGIC; |
done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
generic( |
width : integer := 32 |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-1) downto 0); |
m : in std_logic_vector((width-1) downto 0); |
xin : in std_logic; |
qin : in std_logic; |
xout : out std_logic; |
qout : out std_logic; |
a_msb : in std_logic; |
cin : in std_logic; |
cout : out std_logic; |
start : in std_logic; |
reset : in std_logic; |
done : out std_logic; |
r : out std_logic_vector((width-1) downto 0) |
); |
end standard_stage; |
|
|
architecture Structural of standard_stage is |
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
-- input |
signal cin_i : std_logic; |
signal xin_i : std_logic; |
signal qin_i : std_logic; |
signal a_msb_i : std_logic; |
|
component register_1b |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
|
component register_n |
generic( n : integer := 4 |
); |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC_VECTOR((n-1) downto 0); |
dout : out STD_LOGIC_VECTOR((n-1) downto 0) |
); |
end component; |
|
component standard_cell_block |
generic ( width : integer := 32 |
); |
Port ( my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0)); |
end component; |
-- output |
signal cout_i : std_logic; |
signal r_i : std_logic_vector((width-1) downto 0); |
signal cout_reg_i : std_logic; |
signal xout_reg_i : std_logic; |
signal qout_reg_i : std_logic; |
signal r_reg_i : std_logic_vector((width-1) downto 0); |
|
-- input |
signal cin_i : std_logic; |
signal xin_i : std_logic; |
signal qin_i : std_logic; |
signal a_msb_i : std_logic; |
-- signal cin_reg_i : std_logic; |
-- signal xin_reg_i : std_logic; |
-- signal qin_reg_i : std_logic; |
-- signal a_msb_reg_i : std_logic; |
-- interconnect |
signal a_i : std_logic_vector((width-1) downto 0); |
|
-- output |
signal cout_i : std_logic; |
signal r_i : std_logic_vector((width-1) downto 0); |
signal cout_reg_i : std_logic; |
signal xout_reg_i : std_logic; |
signal qout_reg_i : std_logic; |
signal r_reg_i : std_logic_vector((width-1) downto 0); |
-- control |
signal done_i : std_logic := '1'; |
begin |
|
-- interconnect |
signal a_i : std_logic_vector((width-1) downto 0); |
|
-- control |
-- signal load_out_regs_i : std_logic; |
signal done_i : std_logic := '1'; |
--signal ready_del_i : std_logic := '1'; |
begin |
-- map internal signals to outputs |
done <= done_i; |
r <= r_reg_i; |
146,9 → 107,6
cout <= cout_reg_i; |
qout <= qout_reg_i; |
xout <= xout_reg_i; |
-- two posibilities: |
--done <= ready_i and (not ready_del_i); -- slow |
--done <= not ready_i; -- faster but not sure if it will work (DONE_PROC can be omitted) |
|
-- map inputs to internal signals |
xin_i <= xin; |
156,113 → 114,71
cin_i <= cin; |
a_msb_i <= a_msb; |
|
-- a_i <= a_msb_reg_i & r_reg_i((width-1) downto 1); |
a_i <= a_msb_i & r_reg_i((width-1) downto 1); |
|
-- input registers |
-- A_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => a_msb_i, |
-- dout => a_msb_reg_i |
-- ); |
cell_block : standard_cell_block |
generic map( |
width => width |
) |
port map( |
my => my, |
y => y, |
m => m, |
x => xin_i, |
q => qin_i, |
a => a_i, |
cin => cin_i, |
cout => cout_i, |
r => r_i |
); |
|
-- XIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => xin_i, |
-- dout => xin_reg_i |
-- ); |
done_signal : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => reset, |
din => start, |
dout => done_i |
); |
|
-- output registers |
RESULT_REG : register_n |
generic map( |
n => width |
) |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
XOUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => xin_i, |
dout => xout_reg_i |
); |
|
QOUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => qin_i, |
dout => qout_reg_i |
); |
|
COUT_REG : register_1b |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => cout_i, |
dout => cout_reg_i |
); |
|
|
-- QIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => qin_i, |
-- dout => qin_reg_i |
-- ); |
|
-- CIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => cin_i, |
-- dout => cin_reg_i |
-- ); |
|
cell_block: standard_cell_block |
generic map( width => width |
) |
Port map( my => my, |
y => y, |
m => m, |
-- x => xin_reg_i, |
-- q => qin_reg_i, |
x => xin_i, |
q => qin_i, |
a => a_i, |
-- cin => cin_reg_i, |
cin => cin_i, |
cout => cout_i, |
r => r_i |
); |
|
-- delay_1_cycle: d_flip_flop |
-- port map(core_clk => core_clk, |
-- reset => reset, |
-- din => start, |
-- dout => load_out_regs_i |
-- ); |
|
done_signal: d_flip_flop |
port map(core_clk => core_clk, |
reset => reset, |
-- din => load_out_regs_i, |
din => start, |
dout => done_i |
); |
|
-- output registers |
RESULT_REG: register_n |
generic map( n => width |
) |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
XOUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
-- din => xin_reg_i, |
din => xin_i, |
dout => xout_reg_i |
); |
|
QOUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
-- din => qin_reg_i, |
din => qin_i, |
dout => qout_reg_i |
); |
|
COUT_REG: register_1b |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => cout_i, |
dout => cout_reg_i |
); |
|
end Structural; |
/last_stage.vhd
1,160 → 1,98
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: last_stage.vhd / entity last_stage |
-- |
-- Last Modified: 24/11/2011 |
-- |
-- Description: last stage for use in the montgommery multiplier systolic |
-- array pipeline |
-- |
-- |
-- Dependencies: standard_cell_block |
-- cell_1b |
-- |
-- Revision: |
-- Revision 5.00 - Removed input registers and used start signal as load_out_regs |
-- Revision 4.01 - Remove "done" input |
-- Revision 4.00 - Removed "a" input with internal feedback |
-- Revision 3.03 - fixed switched last two bits |
-- Revision 3.02 - removed "ready" output signal |
-- Revision 3.01 - replaced the behavioral description of the registers with a |
-- component instantiation |
-- Revision 3.00 - added registers to store input values xin, cin, qin (because they |
-- can change during operation) |
-- Revision 2.00 - changed indices in signals my, y and m |
-- Revision 1.03 - added done pulse |
-- Revision 1.02 - appended "_i" to name of all internal signals |
-- Revision 1.01 - ready is '1' after reset |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- first_stage ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- last stage for use in the montgommery multiplier ---- |
---- systolic array pipeline ---- |
---- ---- |
---- Dependencies: ---- |
---- - standard_cell_block ---- |
---- - register_n ---- |
---- - cell_1b ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity last_stage is |
generic(width : integer := 16 -- must be the same as width of the standard stage |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-2) downto 0); |
m : in STD_LOGIC_VECTOR((width-2) downto 0); |
xin : in STD_LOGIC; |
qin : in STD_LOGIC; |
cin : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
-- ready : out STD_LOGIC; |
-- done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width+1) downto 0) |
); |
generic( |
width : integer := 16 -- must be the same as width of the standard stage |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((width-1) downto 0); |
y : in std_logic_vector((width-2) downto 0); |
m : in std_logic_vector((width-2) downto 0); |
xin : in std_logic; |
qin : in std_logic; |
cin : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
r : out std_logic_vector((width+1) downto 0) |
); |
end last_stage; |
|
|
architecture Structural of last_stage is |
|
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
-- input |
signal my_i : std_logic_vector(width downto 0); |
signal m_i : std_logic_vector(width downto 0); |
signal y_i : std_logic_vector(width downto 0); |
signal cin_i : std_logic; |
signal xin_i : std_logic; |
signal qin_i : std_logic; |
signal a_i : std_logic_vector((width) downto 0); |
|
component register_1b |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
|
component register_n |
generic( n : integer := 4 |
); |
port(core_clk : in STD_LOGIC; |
ce : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC_VECTOR((n-1) downto 0); |
dout : out STD_LOGIC_VECTOR((n-1) downto 0) |
); |
end component; |
|
component standard_cell_block |
generic ( width : integer := 32 |
); |
Port ( my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0)); |
end component; |
-- output |
signal r_i : std_logic_vector((width+1) downto 0); |
signal r_reg_i : std_logic_vector((width+1) downto 0); |
|
component cell_1b |
port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
a : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
end component; |
|
-- input |
signal my_i : std_logic_vector(width downto 0); |
signal m_i : std_logic_vector(width downto 0); |
signal y_i : std_logic_vector(width downto 0); |
signal cin_i : std_logic; |
signal xin_i : std_logic; |
signal qin_i : std_logic; |
signal a_i : std_logic_vector((width) downto 0); |
-- signal cin_reg_i : std_logic; |
-- signal xin_reg_i : std_logic; |
-- signal qin_reg_i : std_logic; |
-- signal a_reg_i : std_logic_vector((width) downto 0); |
-- interconnection |
signal cout_i : std_logic; |
|
-- output |
signal r_i : std_logic_vector((width+1) downto 0); |
signal r_reg_i : std_logic_vector((width+1) downto 0); |
|
-- interconnection |
signal cout_i : std_logic; |
|
-- control signals |
-- signal load_out_regs_i : std_logic; |
-- signal done_i : std_logic := '1'; |
--signal ready_del_i : std_logic := '1'; |
|
begin |
-- map internal signals to outputs |
-- done <= done_i; |
r <= r_reg_i; |
-- two posibilities: |
--done <= ready_i and (not ready_del_i); -- slow |
--done <= not ready_i; -- faster but not sure if it will work (DONE_PROC can be omitted) |
|
-- map inputs to internal signals |
my_i <= '0' & my; |
166,86 → 104,46
|
a_i <= r_reg_i((width+1) downto 1); |
|
cell_block: standard_cell_block |
generic map( width => width |
) |
Port map( my => my_i(width-1 downto 0), |
y => y_i(width-1 downto 0), |
m => m_i(width-1 downto 0), |
-- x => xin_reg_i, |
-- q => qin_reg_i, |
x => xin_i, |
q => qin_i, |
a => a_i((width-1) downto 0), |
-- cin => cin_reg_i, |
cin => cin_i, |
cout => cout_i, |
r => r_i((width-1) downto 0) |
); |
cell_block : standard_cell_block |
generic map( |
width => width |
) |
port map( |
my => my_i(width-1 downto 0), |
y => y_i(width-1 downto 0), |
m => m_i(width-1 downto 0), |
x => xin_i, |
q => qin_i, |
a => a_i((width-1) downto 0), |
cin => cin_i, |
cout => cout_i, |
r => r_i((width-1) downto 0) |
); |
|
last_cell : cell_1b |
port map( |
my => my_i(width), |
y => y_i(width), |
m => m_i(width), |
x => xin_i, |
q => qin_i, |
a => a_i(width), |
cin => cout_i, |
cout => r_i(width+1), |
r => r_i(width) |
); |
|
-- output registers |
RESULT_REG : register_n |
generic map( |
n => (width+2) |
) |
port map( |
core_clk => core_clk, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
last_cell: cell_1b |
port map( my => my_i(width), |
y => y_i(width), |
m => m_i(width), |
-- x => xin_reg_i, |
-- q => qin_reg_i, |
x => xin_i, |
q => qin_i, |
a => a_i(width), |
cin => cout_i, |
cout => r_i(width+1), |
r => r_i(width) |
); |
|
-- XIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => xin_i, |
-- dout => xin_reg_i |
-- ); |
|
-- QIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => qin_i, |
-- dout => qin_reg_i |
-- ); |
|
-- CIN_REG: register_1b |
-- port map(core_clk => core_clk, |
-- ce => start, |
-- reset => reset, |
-- din => cin_i, |
-- dout => cin_reg_i |
-- ); |
|
-- control |
-- delay_1_cycle: d_flip_flop |
-- port map(core_clk => core_clk, |
-- reset => reset, |
-- din => start, |
-- dout => load_out_regs_i |
-- ); |
|
-- done_signal: d_flip_flop |
-- port map(core_clk => core_clk, |
-- reset => reset, |
-- din => load_out_regs_i, |
-- dout => done_i |
-- ); |
|
-- output registers |
RESULT_REG: register_n |
generic map( n => (width+2) |
) |
port map(core_clk => core_clk, |
-- ce => load_out_regs_i, |
ce => start, |
reset => reset, |
din => r_i, |
dout => r_reg_i |
); |
|
end Structural; |
/operand_mem.vhd
1,112 → 1,102
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: operand_mem.vhd / entity operand_mem |
-- |
-- Last Modified: 18/06/2012 |
-- |
-- Description: BRAM memory and logic to the store 4 (1536-bit) operands and the |
-- modulus for the montgomery multiplier |
-- |
-- |
-- Dependencies: modulus_ram, operand_ram |
-- |
-- Revision: |
-- Revision 2.00 - Removed y_register -> seperate module |
-- Revision 1.01 - Added "result_dest_op" input |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- operand_mem ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- BRAM memory and logic to the store 4 (1536-bit) operands ---- |
---- and the modulus for the montgomery multiplier ---- |
---- ---- |
---- Dependencies: ---- |
---- - operand_ram ---- |
---- - modulus_ram ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity operand_mem is |
generic(n : integer := 1536 |
); |
port(-- data interface (plb side) |
data_in : in std_logic_vector(31 downto 0); |
data_out : out std_logic_vector(31 downto 0); |
rw_address : in std_logic_vector(8 downto 0); |
-- address structure: |
-- bit: 8 -> '1': modulus |
-- '0': operands |
-- bits: 7-6 -> operand_in_sel in case of bit 8 = '0' |
-- don't care in case of modulus |
-- bits: 5-0 -> modulus_addr / operand_addr resp. |
|
-- operand interface (multiplier side) |
op_sel : in std_logic_vector(1 downto 0); |
xy_out : out std_logic_vector(1535 downto 0); |
m : out std_logic_vector(1535 downto 0); |
result_in : in std_logic_vector(1535 downto 0); |
-- control signals |
load_op : in std_logic; |
load_m : in std_logic; |
load_result : in std_logic; |
result_dest_op : in std_logic_vector(1 downto 0); |
collision : out std_logic; |
-- system clock |
clk : in std_logic |
); |
generic(n : integer := 1536 |
); |
port( |
-- data interface (plb side) |
data_in : in std_logic_vector(31 downto 0); |
data_out : out std_logic_vector(31 downto 0); |
rw_address : in std_logic_vector(8 downto 0); |
-- address structure: |
-- bit: 8 -> '1': modulus |
-- '0': operands |
-- bits: 7-6 -> operand_in_sel in case of bit 8 = '0' |
-- don't care in case of modulus |
-- bits: 5-0 -> modulus_addr / operand_addr resp. |
|
-- operand interface (multiplier side) |
op_sel : in std_logic_vector(1 downto 0); |
xy_out : out std_logic_vector(1535 downto 0); |
m : out std_logic_vector(1535 downto 0); |
result_in : in std_logic_vector(1535 downto 0); |
-- control signals |
load_op : in std_logic; |
load_m : in std_logic; |
load_result : in std_logic; |
result_dest_op : in std_logic_vector(1 downto 0); |
collision : out std_logic; |
-- system clock |
clk : in std_logic |
); |
end operand_mem; |
|
|
architecture Behavioral of operand_mem is |
-- single port (32-bit -> 1536-bit) block ram |
component modulus_ram |
port( |
clk : in std_logic; |
modulus_addr : in std_logic_vector(5 downto 0); |
write_modulus : in std_logic; |
modulus_in : in std_logic_vector(31 downto 0); |
modulus_out : out std_logic_vector(1535 downto 0) |
); |
end component; |
signal xy_data_i : std_logic_vector(31 downto 0); |
signal xy_addr_i : std_logic_vector(5 downto 0); |
signal operand_in_sel_i : std_logic_vector(1 downto 0); |
signal collision_i : std_logic; |
|
-- dual port block ram |
component operand_ram |
port( |
clk : in std_logic; |
operand_addr : in std_logic_vector(5 downto 0); |
operand_in : in std_logic_vector(31 downto 0); |
operand_in_sel : in std_logic_vector(1 downto 0); |
write_operand : in std_logic; |
operand_out_sel : in std_logic_vector(1 downto 0); |
result_dest_op : in std_logic_vector(1 downto 0); |
write_result : in std_logic; |
result_in : in std_logic_vector(1535 downto 0); |
collision : out std_logic; |
result_out : out std_logic_vector(31 downto 0); |
operand_out : out std_logic_vector(1535 downto 0) |
); |
end component; |
signal xy_op_i : std_logic_vector(1535 downto 0); |
|
signal xy_data_i : std_logic_vector(31 downto 0); |
signal xy_addr_i : std_logic_vector(5 downto 0); |
signal operand_in_sel_i : std_logic_vector(1 downto 0); |
signal collision_i : std_logic; |
signal m_addr_i : std_logic_vector(5 downto 0); |
signal write_m_i : std_logic; |
signal m_data_i : std_logic_vector(31 downto 0); |
|
signal xy_op_i : std_logic_vector(1535 downto 0); |
|
signal m_addr_i : std_logic_vector(5 downto 0); |
signal write_m_i : std_logic; |
signal m_data_i : std_logic_vector(31 downto 0); |
begin |
|
-- map outputs |
121,31 → 111,31
m_data_i <= data_in; |
write_m_i <= load_m; |
|
-- xy operand storage |
xy_ram: operand_ram port map( |
clk => clk, |
collision => collision_i, |
operand_addr => xy_addr_i, |
operand_in => xy_data_i, |
operand_in_sel => operand_in_sel_i, |
result_out => data_out, |
write_operand => load_op, |
operand_out => xy_op_i, |
operand_out_sel => op_sel, |
result_dest_op => result_dest_op, |
write_result => load_result, |
result_in => result_in |
); |
-- xy operand storage |
xy_ram : operand_ram |
port map( |
clk => clk, |
collision => collision_i, |
operand_addr => xy_addr_i, |
operand_in => xy_data_i, |
operand_in_sel => operand_in_sel_i, |
result_out => data_out, |
write_operand => load_op, |
operand_out => xy_op_i, |
operand_out_sel => op_sel, |
result_dest_op => result_dest_op, |
write_result => load_result, |
result_in => result_in |
); |
|
-- modulus storage |
m_ram : modulus_ram |
port map( |
clk => clk, |
modulus_addr => m_addr_i, |
write_modulus => write_m_i, |
modulus_in => m_data_i, |
modulus_out => m |
); |
|
-- modulus storage |
m_ram : modulus_ram |
port map( |
clk => clk, |
modulus_addr => m_addr_i, |
write_modulus => write_m_i, |
modulus_in => m_data_i, |
modulus_out => m |
); |
|
end Behavioral; |
|
/modulus_ram.vhd
1,57 → 1,71
---------------------------------------------------------------------------------- |
-- Company: |
-- Engineer: |
-- |
-- Create Date: 13:57:21 03/08/2012 |
-- Design Name: |
-- Module Name: modulus_ram - Behavioral |
-- Project Name: |
-- Target Devices: |
-- Tool versions: |
-- Description: |
-- |
-- Dependencies: |
-- |
-- Revision: |
-- Revision 0.01 - File Created |
-- Additional Comments: |
-- |
---------------------------------------------------------------------------------- |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- modulus_ram ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- BRAM memory and logic to store the 1536-bit modulus ---- |
---- ---- |
---- Dependencies: ---- |
---- - operands_sp (coregen) ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity modulus_ram is |
port( |
clk : in std_logic; |
modulus_addr : in std_logic_vector(5 downto 0); |
write_modulus : in std_logic; |
modulus_in : in std_logic_vector(31 downto 0); |
modulus_out : out std_logic_vector(1535 downto 0) |
); |
port( |
clk : in std_logic; |
modulus_addr : in std_logic_vector(5 downto 0); |
write_modulus : in std_logic; |
modulus_in : in std_logic_vector(31 downto 0); |
modulus_out : out std_logic_vector(1535 downto 0) |
); |
end modulus_ram; |
|
|
architecture Behavioral of modulus_ram is |
-- single port blockram to store modulus |
component operands_sp |
port( |
clka: in std_logic; |
wea: in std_logic_vector(0 downto 0); |
addra: in std_logic_vector(4 downto 0); |
dina: in std_logic_vector(31 downto 0); |
douta: out std_logic_vector(511 downto 0) |
); |
end component; |
|
signal part_enable : std_logic_vector(3 downto 0); |
signal wea : std_logic_vector(3 downto 0); |
signal addra : std_logic_vector(4 downto 0); |
signal part_enable : std_logic_vector(3 downto 0); |
signal wea : std_logic_vector(3 downto 0); |
signal addra : std_logic_vector(4 downto 0); |
begin |
|
-- the blockram has a write depth of 2 but we only use the lower half |
59,10 → 73,10
|
-- the two highest bits of the address are used to select the bloc |
with modulus_addr(5 downto 4) select |
part_enable <= "0001" when "00", |
"0010" when "01", |
"0100" when "10", |
"1000" when others; |
part_enable <= "0001" when "00", |
"0010" when "01", |
"0100" when "10", |
"1000" when others; |
|
with write_modulus select |
wea <= part_enable when '1', |
69,41 → 83,31
"0000" when others; |
|
-- 4 instances of 512 bits blockram |
modulus_0 : operands_sp |
port map ( |
clka => clk, |
wea => wea(0 downto 0), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(511 downto 0) |
); |
|
modulus_1 : operands_sp |
port map ( |
clka => clk, |
wea => wea(1 downto 1), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(1023 downto 512) |
); |
|
modulus_2 : operands_sp |
port map ( |
clka => clk, |
wea => wea(2 downto 2), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(1535 downto 1024) |
); |
|
-- modulus_3 : operands_sp |
-- port map ( |
-- clka => clk, |
-- wea => wea(3 downto 3), |
-- addra => addra, |
-- dina => modulus_in, |
-- douta => modulus_out(2047 downto 1536) |
-- ); |
modulus_0 : operands_sp |
port map ( |
clka => clk, |
wea => wea(0 downto 0), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(511 downto 0) |
); |
|
modulus_1 : operands_sp |
port map ( |
clka => clk, |
wea => wea(1 downto 1), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(1023 downto 512) |
); |
|
modulus_2 : operands_sp |
port map ( |
clka => clk, |
wea => wea(2 downto 2), |
addra => addra, |
dina => modulus_in, |
douta => modulus_out(1535 downto 1024) |
); |
|
end Behavioral; |
|
/operand_ram.vhd
1,93 → 1,95
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: operand_mem.vhd / entity operand_mem |
-- |
-- Last Modified: 25/04/2012 |
-- |
-- Description: BRAM memory and logic to the store 4 (1536-bit) operands and the |
-- modulus for the montgomery multiplier |
-- |
-- |
-- Dependencies: operand_dp (coregen) |
-- |
-- Revision: |
-- Revision 1.01 - added "result_dest_op" input |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- Additional Comments: |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- operand_ram ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- BRAM memory and logic to the store 4 (1536-bit) operands ---- |
---- for the montgomery multiplier ---- |
---- ---- |
---- Dependencies: ---- |
---- - operand_dp (coregen) ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity operand_ram is |
port( -- write_operand_ack voorzien? |
-- global ports |
clk : in std_logic; |
collision : out std_logic; |
-- bus side connections (32-bit serial) |
operand_addr : in std_logic_vector(5 downto 0); |
operand_in : in std_logic_vector(31 downto 0); |
operand_in_sel : in std_logic_vector(1 downto 0); |
result_out : out std_logic_vector(31 downto 0); |
write_operand : in std_logic; |
-- multiplier side connections (+1024 bit parallel) |
result_dest_op : in std_logic_vector(1 downto 0); |
operand_out : out std_logic_vector(1535 downto 0); |
operand_out_sel : in std_logic_vector(1 downto 0); -- controlled by bus side :) |
write_result : in std_logic; |
result_in : in std_logic_vector(1535 downto 0) |
); |
port( -- write_operand_ack voorzien? |
-- global ports |
clk : in std_logic; |
collision : out std_logic; |
-- bus side connections (32-bit serial) |
operand_addr : in std_logic_vector(5 downto 0); |
operand_in : in std_logic_vector(31 downto 0); |
operand_in_sel : in std_logic_vector(1 downto 0); |
result_out : out std_logic_vector(31 downto 0); |
write_operand : in std_logic; |
-- multiplier side connections (1536 bit parallel) |
result_dest_op : in std_logic_vector(1 downto 0); |
operand_out : out std_logic_vector(1535 downto 0); |
operand_out_sel : in std_logic_vector(1 downto 0); -- controlled by bus side |
write_result : in std_logic; |
result_in : in std_logic_vector(1535 downto 0) |
); |
end operand_ram; |
|
|
architecture Behavioral of operand_ram is |
-- dual port blockram to store and update operands |
component operand_dp |
port ( |
clka: in std_logic; |
wea: in std_logic_vector(0 downto 0); |
addra: in std_logic_vector(5 downto 0); |
dina: in std_logic_vector(31 downto 0); |
douta: out std_logic_vector(511 downto 0); |
clkb: in std_logic; |
web: IN std_logic_VECTOR(0 downto 0); |
addrb: IN std_logic_VECTOR(5 downto 0); |
dinb: IN std_logic_VECTOR(511 downto 0); |
doutb: OUT std_logic_VECTOR(31 downto 0)); |
end component; |
|
-- port a signals |
signal addra : std_logic_vector(5 downto 0); |
signal part_enable : std_logic_vector(3 downto 0); |
signal wea : std_logic_vector(3 downto 0); |
signal write_operand_i : std_logic; |
|
-- port b signals |
signal addrb : std_logic_vector(5 downto 0); |
signal web : std_logic_vector(0 downto 0); |
signal doutb0 : std_logic_vector(31 downto 0); |
signal doutb1 : std_logic_vector(31 downto 0); |
signal doutb2 : std_logic_vector(31 downto 0); |
signal doutb3 : std_logic_vector(31 downto 0); |
|
-- port a signals |
signal addra : std_logic_vector(5 downto 0); |
signal part_enable : std_logic_vector(3 downto 0); |
signal wea : std_logic_vector(3 downto 0); |
signal write_operand_i : std_logic; |
|
-- port b signals |
signal addrb : std_logic_vector(5 downto 0); |
signal web : std_logic_vector(0 downto 0); |
signal doutb0 : std_logic_vector(31 downto 0); |
signal doutb1 : std_logic_vector(31 downto 0); |
signal doutb2 : std_logic_vector(31 downto 0); |
signal doutb3 : std_logic_vector(31 downto 0); |
|
begin |
|
-- WARNING: Very Important! |
-- wea & web signals must never be high at the same time !! |
-- web has priority |
103,10 → 105,10
operand_out_sel & "0000" when others; |
|
with operand_addr(5 downto 4) select |
part_enable <= "0001" when "00", |
"0010" when "01", |
"0100" when "10", |
"1000" when others; |
part_enable <= "0001" when "00", |
"0010" when "01", |
"0100" when "10", |
"1000" when others; |
|
with write_operand_i select |
wea <= part_enable when '1', |
115,83 → 117,54
-- we can only read back from the result (stored in result_dest_op) |
addrb <= result_dest_op & operand_addr(3 downto 0); |
|
-- register_output_proc: process(clk) |
-- begin |
-- if rising_edge(clk) then |
-- case operand_addr(5 downto 4) is |
-- when "00" => |
-- result_out <= doutb0; |
-- when "01" => |
-- result_out <= doutb1; |
-- when "10" => |
-- result_out <= doutb2; |
-- when others => |
-- result_out <= doutb3; |
-- end case; |
-- end if; |
-- end process; |
|
with operand_addr(5 downto 4) select |
result_out <= doutb0 when "00", |
doutb1 when "01", |
doutb2 when "10", |
doutb3 when others; |
doutb2 when "10", |
doutb3 when others; |
|
-- 4 instances of a dual port ram to store the parts of the operand |
op_0 : operand_dp |
port map ( |
clka => clk, |
wea => wea(0 downto 0), |
addra => addra, |
dina => operand_in, |
douta => operand_out(511 downto 0), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(511 downto 0), |
doutb => doutb0 |
); |
|
op_1 : operand_dp |
port map ( |
clka => clk, |
wea => wea(1 downto 1), |
addra => addra, |
dina => operand_in, |
douta => operand_out(1023 downto 512), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(1023 downto 512), |
doutb => doutb1 |
); |
|
op_2 : operand_dp |
port map ( |
clka => clk, |
wea => wea(2 downto 2), |
addra => addra, |
dina => operand_in, |
douta => operand_out(1535 downto 1024), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(1535 downto 1024), |
doutb => doutb2 |
); |
|
-- op_3 : operand_dp |
-- port map ( |
-- clka => clk, |
-- wea => wea(3 downto 3), |
-- addra => addra, |
-- dina => operand_in, |
-- douta => operand_out(2047 downto 1536), |
-- clkb => clk, |
-- web => web, |
-- addrb => addrb, |
-- dinb => result_in(2047 downto 1536), |
-- doutb => doutb3 |
-- ); |
-- 3 instances of a dual port ram to store the parts of the operand |
op_0 : operand_dp |
port map ( |
clka => clk, |
wea => wea(0 downto 0), |
addra => addra, |
dina => operand_in, |
douta => operand_out(511 downto 0), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(511 downto 0), |
doutb => doutb0 |
); |
|
op_1 : operand_dp |
port map ( |
clka => clk, |
wea => wea(1 downto 1), |
addra => addra, |
dina => operand_in, |
douta => operand_out(1023 downto 512), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(1023 downto 512), |
doutb => doutb1 |
); |
|
op_2 : operand_dp |
port map ( |
clka => clk, |
wea => wea(2 downto 2), |
addra => addra, |
dina => operand_in, |
douta => operand_out(1535 downto 1024), |
clkb => clk, |
web => web, |
addrb => addrb, |
dinb => result_in(1535 downto 1024), |
doutb => doutb2 |
); |
|
end Behavioral; |
|
/adder_block.vhd
1,90 → 1,96
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: adder_block.vhd / entity adder_block |
-- |
-- Last Modified: 25/11/2011 |
-- |
-- Description: adder block for use in the montgommery multiplier pre- and post- |
-- computation adders |
-- |
-- |
-- Dependencies: cell_1b_adder, |
-- d_flip_flop |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- adder_block ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- Adder block with a flipflop for the carry out ---- |
---- for use in the montgommery multiplier pre and post ---- |
---- computation adders ---- |
---- ---- |
---- Dependencies: ---- |
---- - cell_1b_adder ---- |
---- - d_flip_flop ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
entity adder_block is |
generic ( width : integer := 32 |
); |
Port ( core_clk : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
b : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
s : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
generic ( |
width : integer := 32 |
); |
port ( |
core_clk : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
b : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
s : out std_logic_vector((width-1) downto 0) |
); |
end adder_block; |
|
|
architecture Structural of adder_block is |
component cell_1b_adder |
Port ( a : in STD_LOGIC; |
mux_result : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
r : out STD_LOGIC); |
end component; |
|
component d_flip_flop |
port(core_clk : in STD_LOGIC; |
reset : in STD_LOGIC; |
din : in STD_LOGIC; |
dout : out STD_LOGIC |
); |
end component; |
|
signal carry : std_logic_vector(width downto 0); |
signal carry : std_logic_vector(width downto 0); |
begin |
|
carry(0) <= cin; |
|
adder_chain: for i in 0 to (width-1) generate |
adders: cell_1b_adder |
port map(a => a(i), |
mux_result => b(i), |
cin => carry(i), |
cout => carry(i+1), |
r => s(i) |
); |
end generate; |
|
delay_1_cycle: d_flip_flop |
port map(core_clk => core_clk, |
reset => '0', |
din => carry(width), |
dout => cout |
); |
|
end Structural; |
|
carry(0) <= cin; |
|
adder_chain : for i in 0 to (width-1) generate |
adders : cell_1b_adder |
port map( |
a => a(i), |
mux_result => b(i), |
cin => carry(i), |
cout => carry(i+1), |
r => s(i) |
); |
end generate; |
|
delay_1_cycle : d_flip_flop |
port map( |
core_clk => core_clk, |
reset => '0', |
din => carry(width), |
dout => cout |
); |
|
end Structural; |
/cell_1b_mux.vhd
1,60 → 1,74
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: cell_1b_mux.vhd / entity cell_1b_mux |
-- |
-- Last Modified: 14/11/2011 |
-- |
-- Description: mux for use in the montgommery multiplier systolic array |
-- currently a behavioral description |
-- |
-- |
-- Dependencies: none |
-- |
-- Revision: |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- cel_1b_mux ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- mux for use in the montgommery multiplier systolic array ---- |
---- ---- |
---- Dependencies: none ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
|
entity cell_1b_mux is |
Port ( my : in STD_LOGIC; |
y : in STD_LOGIC; |
m : in STD_LOGIC; |
x : in STD_LOGIC; |
q : in STD_LOGIC; |
result : out STD_LOGIC); |
port ( |
my : in std_logic; |
y : in std_logic; |
m : in std_logic; |
x : in std_logic; |
q : in std_logic; |
result : out std_logic |
); |
end cell_1b_mux; |
|
|
architecture Behavioral of cell_1b_mux is |
signal sel : std_logic_vector(1 downto 0); |
signal sel : std_logic_vector(1 downto 0); |
begin |
|
sel <= x & q; |
|
with sel select |
result <= my when "11", |
y when "10", |
m when "01", |
'0' when others; |
|
sel <= x & q; |
|
with sel select |
result <= my when "11", |
y when "10", |
m when "01", |
'0' when others; |
|
end Behavioral; |
|
/adder_n.vhd
1,7 → 1,6
---------------------------------------------------------------------- |
---------------------------------------------------------------------- |
---- adder_n ---- |
---- ---- |
---- adder_n.vhd ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
8,8 → 7,8
---- ---- |
---- Description ---- |
---- This file contains the implementation of a n-bit adder ---- |
---- using the adder blocks. ---- |
---- used as the montgommery multiplier pre- and post- ---- |
---- using adder_blocks ---- |
---- used for the montgommery multiplier pre- and post- ---- |
---- computation adder ---- |
---- ---- |
---- Dependencies: ---- |
46,61 → 45,53
---- ---- |
---------------------------------------------------------------------- |
|
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity adder_n is |
generic ( width : integer := 1536; |
block_width : integer := 8 |
); |
Port ( core_clk : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
b : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
s : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
generic ( |
width : integer := 1536; |
block_width : integer := 8 |
); |
port ( |
core_clk : in std_logic; |
a : in std_logic_vector((width-1) downto 0); |
b : in std_logic_vector((width-1) downto 0); |
cin : in std_logic; |
cout : out std_logic; |
s : out std_logic_vector((width-1) downto 0) |
); |
end adder_n; |
|
|
architecture Structural of adder_n is |
component adder_block |
generic ( width : integer := 32 |
); |
Port ( core_clk : in STD_LOGIC; |
a : in STD_LOGIC_VECTOR((width-1) downto 0); |
b : in STD_LOGIC_VECTOR((width-1) downto 0); |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
s : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
end component; |
|
constant nr_of_blocks : integer := width/block_width; |
signal carry : std_logic_vector(nr_of_blocks downto 0); |
constant nr_of_blocks : integer := width/block_width; |
signal carry : std_logic_vector(nr_of_blocks downto 0); |
begin |
|
carry(0) <= cin; |
|
adder_block_chain: for i in 0 to (nr_of_blocks-1) generate |
adder_blocks: adder_block |
generic map( width => block_width |
) |
port map( core_clk => core_clk, |
a => a((((i+1)*block_width)-1) downto (i*block_width)), |
b => b((((i+1)*block_width)-1) downto (i*block_width)), |
cin => carry(i), |
cout => carry(i+1), |
s => s((((i+1)*block_width)-1) downto (i*block_width)) |
); |
end generate; |
|
cout <= carry(nr_of_blocks); |
|
|
carry(0) <= cin; |
|
adder_block_chain : for i in 0 to (nr_of_blocks-1) generate |
adder_blocks : adder_block |
generic map( |
width => block_width |
) |
port map( |
core_clk => core_clk, |
a => a((((i+1)*block_width)-1) downto (i*block_width)), |
b => b((((i+1)*block_width)-1) downto (i*block_width)), |
cin => carry(i), |
cout => carry(i+1), |
s => s((((i+1)*block_width)-1) downto (i*block_width)) |
); |
end generate; |
|
cout <= carry(nr_of_blocks); |
|
end Structural; |
/multiplier_core.vhd
1,244 → 1,188
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: multiplier_core.vhd / entity multiplier_core |
-- |
-- Last Modified: 18/06/2012 |
-- |
-- Description: a pipelined montgomery multiplier, with split |
-- pipeline operation and "auto-run" support |
-- |
-- |
-- Dependencies: mont_mult_sys_pipeline, operand_mem, fifo_primitive, mont_cntrl |
-- |
-- Revision: |
-- Revision 6.00 - created seperate module for x-operand (x_shift_reg) |
-- Revision 5.00 - moved fifo interface to shared memory |
-- Revision 4.00 - added dest_op_single input |
-- Revision 3.00 - added auto-run control |
-- Revision 2.01 - Split ctrl_reg input to separate inputs with more descriptive |
-- names |
-- Revision 2.00 - Control logic moved to separate design module and added fifo |
-- Revision 1.00 - Architecture based on multiplier IP core "mont_mult1536_v1_00_a" |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- multiplier_core ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- toplevel of a modular simultaneous exponentiation core ---- |
---- using a pipelined montgommery multiplier with split ---- |
---- pipeline support and auto-run support ---- |
---- ---- |
---- Dependencies: ---- |
---- - mont_mult_sys_pipeline ---- |
---- - operand_mem ---- |
---- - fifo_primitive ---- |
---- - mont_ctrl ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
entity multiplier_core is |
port( clk : in std_logic; |
reset : in std_logic; |
-- operand memory interface (plb shared memory) |
write_enable : in std_logic; |
data_in : in std_logic_vector (31 downto 0); |
rw_address : in std_logic_vector (8 downto 0); |
data_out : out std_logic_vector (31 downto 0); |
collision : out std_logic; |
-- op_sel fifo interface |
fifo_din : in std_logic_vector (31 downto 0); |
fifo_push : in std_logic; |
fifo_full : out std_logic; |
fifo_nopush : out std_logic; |
-- ctrl signals |
start : in std_logic; |
run_auto : in std_logic; |
ready : out std_logic; |
x_sel_single : in std_logic_vector (1 downto 0); |
y_sel_single : in std_logic_vector (1 downto 0); |
dest_op_single : in std_logic_vector (1 downto 0); |
p_sel : in std_logic_vector (1 downto 0); |
calc_time : out std_logic |
); |
port( |
clk : in std_logic; |
reset : in std_logic; |
-- operand memory interface (plb shared memory) |
write_enable : in std_logic; |
data_in : in std_logic_vector (31 downto 0); |
rw_address : in std_logic_vector (8 downto 0); |
data_out : out std_logic_vector (31 downto 0); |
collision : out std_logic; |
-- op_sel fifo interface |
fifo_din : in std_logic_vector (31 downto 0); |
fifo_push : in std_logic; |
fifo_full : out std_logic; |
fifo_nopush : out std_logic; |
-- ctrl signals |
start : in std_logic; |
run_auto : in std_logic; |
ready : out std_logic; |
x_sel_single : in std_logic_vector (1 downto 0); |
y_sel_single : in std_logic_vector (1 downto 0); |
dest_op_single : in std_logic_vector (1 downto 0); |
p_sel : in std_logic_vector (1 downto 0); |
calc_time : out std_logic |
); |
end multiplier_core; |
|
|
architecture Behavioral of multiplier_core is |
component mont_mult_sys_pipeline |
generic ( n : integer := 32; |
nr_stages : integer := 8; --(divides n, bits_low & (n-bits_low)) |
stages_low : integer := 3 |
); |
Port ( core_clk : in STD_LOGIC; |
xy : in STD_LOGIC_VECTOR((n-1) downto 0); |
m : in STD_LOGIC_VECTOR((n-1) downto 0); |
r : out STD_LOGIC_VECTOR((n-1) downto 0); |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); |
load_x : in std_logic; |
ready : out STD_LOGIC |
); |
end component; |
|
component operand_mem |
port( |
data_in : in std_logic_vector(31 downto 0); |
data_out : out std_logic_vector(31 downto 0); |
rw_address : in std_logic_vector(8 downto 0); |
op_sel : in std_logic_vector(1 downto 0); |
xy_out : out std_logic_vector(1535 downto 0); |
m : out std_logic_vector(1535 downto 0); |
result_in : in std_logic_vector(1535 downto 0); |
load_op : in std_logic; |
load_m : in std_logic; |
load_result : in std_logic; |
result_dest_op : in std_logic_vector(1 downto 0); |
collision : out std_logic; |
clk : in std_logic |
); |
end component; |
|
component fifo_primitive |
port( |
clk : in std_logic; |
din : in std_logic_vector(31 downto 0); |
push : in std_logic; |
pop : in std_logic; |
reset : in std_logic; |
dout : out std_logic_vector(31 downto 0); |
empty : out std_logic; |
full : out std_logic; |
nopop : out std_logic; |
nopush : out std_logic |
); |
end component; |
|
component mont_ctrl |
port( |
clk : in std_logic; |
reset : in std_logic; |
start : in std_logic; |
x_sel_single : in std_logic_vector(1 downto 0); |
y_sel_single : in std_logic_vector(1 downto 0); |
run_auto : in std_logic; |
op_sel_buffer : in std_logic_vector(31 downto 0); |
read_buffer : out std_logic; |
multiplier_ready : in std_logic; |
op_buffer_empty : in std_logic; |
buffer_noread : in std_logic; |
done : out std_logic; |
calc_time : out std_logic; |
op_sel : out std_logic_vector(1 downto 0); |
load_x : out std_logic; |
load_result : out std_logic; |
start_multiplier : out std_logic |
); |
end component; |
|
signal xy_i : std_logic_vector(1535 downto 0); |
signal x_i : std_logic; |
signal m : std_logic_vector(1535 downto 0); |
signal r : std_logic_vector(1535 downto 0); |
|
signal op_sel : std_logic_vector(1 downto 0); |
signal result_dest_op_i : std_logic_vector(1 downto 0); |
signal mult_ready : std_logic; |
signal start_mult : std_logic; |
signal load_op : std_logic; |
signal load_x_i : std_logic; |
signal load_m : std_logic; |
signal load_result : std_logic; |
|
signal fifo_empty : std_logic; |
signal fifo_pop : std_logic; |
signal fifo_nopop : std_logic; |
signal fifo_dout : std_logic_vector(31 downto 0); |
--signal fifo_push : std_logic; |
|
constant n : integer := 1536; |
constant t : integer := 96; |
constant tl : integer := 32; |
signal xy_i : std_logic_vector(1535 downto 0); |
signal x_i : std_logic; |
signal m : std_logic_vector(1535 downto 0); |
signal r : std_logic_vector(1535 downto 0); |
|
signal op_sel : std_logic_vector(1 downto 0); |
signal result_dest_op_i : std_logic_vector(1 downto 0); |
signal mult_ready : std_logic; |
signal start_mult : std_logic; |
signal load_op : std_logic; |
signal load_x_i : std_logic; |
signal load_m : std_logic; |
signal load_result : std_logic; |
|
signal fifo_empty : std_logic; |
signal fifo_pop : std_logic; |
signal fifo_nopop : std_logic; |
signal fifo_dout : std_logic_vector(31 downto 0); |
--signal fifo_push : std_logic; |
|
constant n : integer := 1536; |
constant t : integer := 96; |
constant tl : integer := 32; |
|
begin |
|
-- The actual multiplier |
the_multiplier: mont_mult_sys_pipeline generic map( |
n => n, |
nr_stages => t, --(divides n, bits_low & (n-bits_low)) |
stages_low => tl |
) |
port map( |
core_clk => clk, |
xy => xy_i, |
m => m, |
r => r, |
start => start_mult, |
reset => reset, |
p_sel => p_sel, |
load_x => load_x_i, |
ready => mult_ready |
); |
|
-- Block ram memory for storing the operands and the modulus |
the_memory: operand_mem port map( |
data_in => data_in, |
data_out => data_out, |
rw_address => rw_address, |
op_sel => op_sel, |
xy_out => xy_i, |
m => m, |
result_in => r, |
load_op => load_op, |
load_m => load_m, |
load_result => load_result, |
result_dest_op => result_dest_op_i, |
collision => collision, |
clk => clk |
); |
-- The actual multiplier |
the_multiplier : mont_mult_sys_pipeline generic map( |
n => n, |
nr_stages => t, --(divides n, bits_low & (n-bits_low)) |
stages_low => tl |
) |
port map( |
core_clk => clk, |
xy => xy_i, |
m => m, |
r => r, |
start => start_mult, |
reset => reset, |
p_sel => p_sel, |
load_x => load_x_i, |
ready => mult_ready |
); |
|
-- Block ram memory for storing the operands and the modulus |
the_memory : operand_mem port map( |
data_in => data_in, |
data_out => data_out, |
rw_address => rw_address, |
op_sel => op_sel, |
xy_out => xy_i, |
m => m, |
result_in => r, |
load_op => load_op, |
load_m => load_m, |
load_result => load_result, |
result_dest_op => result_dest_op_i, |
collision => collision, |
clk => clk |
); |
|
load_op <= write_enable when (rw_address(8) = '0') else '0'; |
load_m <= write_enable when (rw_address(8) = '1') else '0'; |
result_dest_op_i <= dest_op_single when run_auto = '0' else "11"; -- in autorun mode we always store the result in operand3 |
|
-- A fifo for auto-run operand selection |
the_exponent_fifo: fifo_primitive port map( |
clk => clk, |
din => fifo_din, |
dout => fifo_dout, |
empty => fifo_empty, |
full => fifo_full, |
push => fifo_push, |
pop => fifo_pop, |
reset => reset, |
nopop => fifo_nopop, |
nopush => fifo_nopush |
); |
-- A fifo for auto-run operand selection |
the_exponent_fifo : fifo_primitive port map( |
clk => clk, |
din => fifo_din, |
dout => fifo_dout, |
empty => fifo_empty, |
full => fifo_full, |
push => fifo_push, |
pop => fifo_pop, |
reset => reset, |
nopop => fifo_nopop, |
nopush => fifo_nopush |
); |
|
-- The control logic for the core |
the_control_unit: mont_ctrl port map( |
clk => clk, |
reset => reset, |
start => start, |
x_sel_single => x_sel_single, |
y_sel_single => y_sel_single, |
run_auto => run_auto, |
op_buffer_empty => fifo_empty, |
op_sel_buffer => fifo_dout, |
read_buffer => fifo_pop, |
buffer_noread => fifo_nopop, |
done => ready, |
calc_time => calc_time, |
op_sel => op_sel, |
load_x => load_x_i, |
load_result => load_result, |
start_multiplier => start_mult, |
multiplier_ready => mult_ready |
); |
-- The control logic for the core |
the_control_unit : mont_ctrl port map( |
clk => clk, |
reset => reset, |
start => start, |
x_sel_single => x_sel_single, |
y_sel_single => y_sel_single, |
run_auto => run_auto, |
op_buffer_empty => fifo_empty, |
op_sel_buffer => fifo_dout, |
read_buffer => fifo_pop, |
buffer_noread => fifo_nopop, |
done => ready, |
calc_time => calc_time, |
op_sel => op_sel, |
load_x => load_x_i, |
load_result => load_result, |
start_multiplier => start_mult, |
multiplier_ready => mult_ready |
); |
|
|
end Behavioral; |
|
/systolic_pipeline.vhd
1,47 → 1,60
------------------------------------------------------------------------------------ |
-- |
-- Geoffrey Ottoy - DraMCo research group |
-- |
-- Module Name: systolic_pipeline.vhd / entity systolic_pipeline |
-- |
-- Last Modified: 05/01/2012 |
-- |
-- Description: pipelined systolic array implementation of a montgomery multiplier |
-- |
-- |
-- Dependencies: first_stage, |
-- standard_stage, |
-- last_stage, |
-- stepping_control |
-- |
-- Revision: |
-- Revision 3.00 - Made x_selection external |
-- Revision 2.02 - Changed design to cope with new stepping_control (next_x) |
-- Revision 2.01 - Created an extra contant s (step size = n/t) to fix a problem |
-- that occured when t not = sqrt(n). |
-- Revision 2.00 - Moved stepping logic and x_selection to seperate submodules |
-- Revision 1.00 - Architecture |
-- Revision 0.01 - File Created |
-- |
-- |
------------------------------------------------------------------------------------ |
-- |
-- NOTICE: |
-- |
-- Copyright DraMCo research group. 2011. This code may be contain portions patented |
-- by other third parties! |
-- |
------------------------------------------------------------------------------------ |
library IEEE; |
use IEEE.STD_LOGIC_1164.ALL; |
use IEEE.STD_LOGIC_ARITH.ALL; |
use IEEE.STD_LOGIC_UNSIGNED.ALL; |
---------------------------------------------------------------------- |
---- systolic_pipeline ---- |
---- ---- |
---- This file is part of the ---- |
---- Modular Simultaneous Exponentiation Core project ---- |
---- http://www.opencores.org/cores/mod_sim_exp/ ---- |
---- ---- |
---- Description ---- |
---- pipelined systolic array implementation of a montgomery ---- |
---- multiplier ---- |
---- ---- |
---- Dependencies: ---- |
---- - stepping_logic ---- |
---- - first_stage ---- |
---- - standard_stage ---- |
---- - last_stage ---- |
---- ---- |
---- Authors: ---- |
---- - Geoffrey Ottoy, DraMCo research group ---- |
---- - Jonas De Craene, JonasDC@opencores.org ---- |
---- ---- |
---------------------------------------------------------------------- |
---- ---- |
---- Copyright (C) 2011 DraMCo research group and OPENCORES.ORG ---- |
---- ---- |
---- This source file may be used and distributed without ---- |
---- restriction provided that this copyright statement is not ---- |
---- removed from the file and that any derivative work contains ---- |
---- the original copyright notice and the associated disclaimer. ---- |
---- ---- |
---- This source file is free software; you can redistribute it ---- |
---- and/or modify it under the terms of the GNU Lesser General ---- |
---- Public License as published by the Free Software Foundation; ---- |
---- either version 2.1 of the License, or (at your option) any ---- |
---- later version. ---- |
---- ---- |
---- This source is distributed in the hope that it will be ---- |
---- useful, but WITHOUT ANY WARRANTY; without even the implied ---- |
---- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ---- |
---- PURPOSE. See the GNU Lesser General Public License for more ---- |
---- details. ---- |
---- ---- |
---- You should have received a copy of the GNU Lesser General ---- |
---- Public License along with this source; if not, download it ---- |
---- from http://www.opencores.org/lgpl.shtml ---- |
---- ---- |
---------------------------------------------------------------------- |
|
---- Uncomment the following library declaration if instantiating |
---- any Xilinx primitives in this code. |
--library UNISIM; |
--use UNISIM.VComponents.all; |
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_arith.all; |
use ieee.std_logic_unsigned.all; |
|
library mod_sim_exp; |
use mod_sim_exp.mod_sim_exp_pkg.all; |
|
|
-- p_sel: |
-- 01 = lower part |
-- 10 = upper part |
48,134 → 61,62
-- 11 = full range |
|
entity systolic_pipeline is |
generic( n : integer := 1536; -- width of the operands (# bits) |
t : integer := 192; -- number of stages (divider of n) >= 2 |
tl: integer := 64 |
-- best take t = sqrt(n) |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((n) downto 0); |
y : in STD_LOGIC_VECTOR((n-1) downto 0); |
m : in STD_LOGIC_VECTOR((n-1) downto 0); |
xi : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
p_sel : in STD_LOGIC_VECTOR(1 downto 0); -- select which piece of the multiplier will be used |
ready : out STD_LOGIC; |
next_x : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((n+1) downto 0) |
); |
generic( |
n : integer := 1536; -- width of the operands (# bits) |
t : integer := 192; -- number of stages (divider of n) >= 2 |
tl : integer := 64 -- best take t = sqrt(n) |
); |
port( |
core_clk : in std_logic; |
my : in std_logic_vector((n) downto 0); |
y : in std_logic_vector((n-1) downto 0); |
m : in std_logic_vector((n-1) downto 0); |
xi : in std_logic; |
start : in std_logic; |
reset : in std_logic; |
p_sel : in std_logic_vector(1 downto 0); -- select which piece of the multiplier will be used |
ready : out std_logic; |
next_x : out std_logic; |
r : out std_logic_vector((n+1) downto 0) |
); |
end systolic_pipeline; |
|
|
architecture Structural of systolic_pipeline is |
constant s : integer := n/t; -- defines the size of the stages (# bits) |
constant size_l : integer := s*tl; |
constant size_h : integer := n - size_l; |
|
constant s : integer := n/t; -- defines the size of the stages (# bits) |
constant size_l : integer := s*tl; |
constant size_h : integer := n - size_l; |
|
component first_stage |
generic(width : integer := 4 -- must be the same as width of the standard stage |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width) downto 0); |
y : in STD_LOGIC_VECTOR((width) downto 0); |
m : in STD_LOGIC_VECTOR((width) downto 0); |
xin : in STD_LOGIC; |
xout : out STD_LOGIC; |
qout : out STD_LOGIC; |
a_msb : in STD_LOGIC; |
cout : out STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
--ready : out STD_LOGIC; |
done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
end component; |
|
component standard_stage |
generic(width : integer := 4 |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-1) downto 0); |
m : in STD_LOGIC_VECTOR((width-1) downto 0); |
xin : in STD_LOGIC; |
qin : in STD_LOGIC; |
xout : out STD_LOGIC; |
qout : out STD_LOGIC; |
a_msb : in STD_LOGIC; |
cin : in STD_LOGIC; |
cout : out STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
-- ready : out STD_LOGIC; |
done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width-1) downto 0) |
); |
end component; |
|
component last_stage |
generic(width : integer := 4 -- must be the same as width of the standard stage |
); |
port(core_clk : in STD_LOGIC; |
my : in STD_LOGIC_VECTOR((width-1) downto 0); |
y : in STD_LOGIC_VECTOR((width-2) downto 0); |
m : in STD_LOGIC_VECTOR((width-2) downto 0); |
xin : in STD_LOGIC; |
qin : in STD_LOGIC; |
cin : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
-- ready : out STD_LOGIC; |
-- done : out STD_LOGIC; |
r : out STD_LOGIC_VECTOR((width+1) downto 0) |
); |
end component; |
|
component stepping_logic |
generic( n : integer := 16; -- max nr of steps required to complete a multiplication |
t : integer := 4 -- total nr of steps in the pipeline |
); |
port(core_clk : in STD_LOGIC; |
start : in STD_LOGIC; |
reset : in STD_LOGIC; |
t_sel : in integer range 0 to t; -- nr of stages in the pipeline piece |
n_sel : in integer range 0 to n; -- nr of steps required for a complete multiplication |
start_first_stage : out STD_LOGIC; |
stepping_done : out STD_LOGIC |
); |
end component; |
signal start_stage_i : std_logic_vector((t-1) downto 0); |
--signal stage_ready_i : std_logic_vector((t-1) downto 0); |
signal stage_done_i : std_logic_vector((t-2) downto 0); |
|
signal start_stage_i : std_logic_vector((t-1) downto 0); |
--signal stage_ready_i : std_logic_vector((t-1) downto 0); |
signal stage_done_i : std_logic_vector((t-2) downto 0); |
|
signal x_i : std_logic_vector((t-1) downto 0) := (others=>'0'); |
signal q_i : std_logic_vector((t-2) downto 0) := (others=>'0'); |
signal c_i : std_logic_vector((t-2) downto 0) := (others=>'0'); |
signal a_i : std_logic_vector((n+1) downto 0) := (others=>'0'); |
signal r_tot : std_logic_vector((n+1) downto 0) := (others=>'0'); |
signal r_h : std_logic_vector(s-1 downto 0) := (others=>'0'); |
signal r_l : std_logic_vector((s+1) downto 0) := (others=>'0'); |
signal a_h : std_logic_vector((s*2)-1 downto 0) := (others=>'0'); |
signal a_l : std_logic_vector((s*2)-1 downto 0) := (others=>'0'); |
|
--signal ready_i : std_logic; |
signal stepping_done_i : std_logic; |
signal t_sel : integer range 0 to t := t; |
signal n_sel : integer range 0 to n := n; |
signal split : std_logic := '0'; |
signal lower_e_i : std_logic := '0'; |
signal higher_e_i : std_logic := '0'; |
signal start_pulses_i : std_logic := '0'; |
signal start_higher_i : std_logic := '0'; |
signal higher_0_done_i : std_logic := '0'; |
signal h_x_0, h_x_1 : std_logic := '0'; |
signal h_q_0, h_q_1 : std_logic := '0'; |
signal h_c_0, h_c_1 : std_logic := '0'; |
signal x_offset_i : integer range 0 to tl*s := 0; |
signal next_x_i : std_logic := '0'; |
signal x_i : std_logic_vector((t-1) downto 0) := (others => '0'); |
signal q_i : std_logic_vector((t-2) downto 0) := (others => '0'); |
signal c_i : std_logic_vector((t-2) downto 0) := (others => '0'); |
signal a_i : std_logic_vector((n+1) downto 0) := (others => '0'); |
signal r_tot : std_logic_vector((n+1) downto 0) := (others => '0'); |
signal r_h : std_logic_vector(s-1 downto 0) := (others => '0'); |
signal r_l : std_logic_vector((s+1) downto 0) := (others => '0'); |
signal a_h : std_logic_vector((s*2)-1 downto 0) := (others => '0'); |
signal a_l : std_logic_vector((s*2)-1 downto 0) := (others => '0'); |
|
--signal ready_i : std_logic; |
signal stepping_done_i : std_logic; |
signal t_sel : integer range 0 to t := t; |
signal n_sel : integer range 0 to n := n; |
signal split : std_logic := '0'; |
signal lower_e_i : std_logic := '0'; |
signal higher_e_i : std_logic := '0'; |
signal start_pulses_i : std_logic := '0'; |
signal start_higher_i : std_logic := '0'; |
signal higher_0_done_i : std_logic := '0'; |
signal h_x_0, h_x_1 : std_logic := '0'; |
signal h_q_0, h_q_1 : std_logic := '0'; |
signal h_c_0, h_c_1 : std_logic := '0'; |
signal x_offset_i : integer range 0 to tl*s := 0; |
signal next_x_i : std_logic := '0'; |
|
begin |
|
-- output mapping |
190,10 → 131,9
a_h((s*2)-1 downto s) <= r_h; |
with p_sel select |
a_i(((tl+1)*s-1) downto ((tl-1)*s)) <= a_l when "01", |
a_h when "10", |
r_tot(((tl+1)*s-1) downto ((tl-1)*s)) when others; |
a_h when "10", |
r_tot(((tl+1)*s-1) downto ((tl-1)*s)) when others; |
|
|
-- signals from x_selection |
next_x_i <= start_stage_i(1) or (start_stage_i(tl+1) and higher_e_i); |
-- |
202,38 → 142,40
|
-- this module controls the pipeline operation |
with p_sel select |
t_sel <= tl when "01", |
t-tl when "10", |
t when others; |
t_sel <= tl when "01", |
t-tl when "10", |
t when others; |
|
with p_sel select |
n_sel <= size_l-1 when "01", |
size_h-1 when "10", |
n-1 when others; |
size_h-1 when "10", |
n-1 when others; |
|
with p_sel select |
lower_e_i <= '0' when "10", |
'1' when others; |
lower_e_i <= '0' when "10", |
'1' when others; |
|
with p_sel select |
higher_e_i <= '1' when "10", |
'0' when others; |
'0' when others; |
|
split <= p_sel(0) and p_sel(1); |
|
|
stepping_control: stepping_logic |
generic map( n => n, -- max nr of steps required to complete a multiplication |
t => t -- total nr of steps in the pipeline |
) |
port map(core_clk => core_clk, |
start => start, |
reset => reset, |
t_sel => t_sel, |
n_sel => n_sel, |
start_first_stage => start_pulses_i, |
stepping_done => stepping_done_i |
); |
stepping_control : stepping_logic |
generic map( |
n => n, -- max nr of steps required to complete a multiplication |
t => t -- total nr of steps in the pipeline |
) |
port map( |
core_clk => core_clk, |
start => start, |
reset => reset, |
t_sel => t_sel, |
n_sel => n_sel, |
start_first_stage => start_pulses_i, |
stepping_done => stepping_done_i |
); |
|
-- start signals for first stage of lower and higher part |
start_stage_i(0) <= start_pulses_i and lower_e_i; |
245,154 → 187,169
|
-- nothing special here, previous stages starts the next |
start_signals_l: for i in 1 to tl-1 generate |
start_stage_i(i) <= stage_done_i(i-1); |
start_stage_i(i) <= stage_done_i(i-1); |
end generate; |
|
start_signals_h: for i in tl+2 to t-1 generate |
start_stage_i(i) <= stage_done_i(i-1); |
start_stage_i(i) <= stage_done_i(i-1); |
end generate; |
|
stage_0 : first_stage |
generic map( |
width => s |
) |
port map( |
core_clk => core_clk, |
my => my(s downto 0), |
y => y(s downto 0), |
m => m(s downto 0), |
xin => x_i(0), |
xout => x_i(1), |
qout => q_i(0), |
a_msb => a_i(s), |
cout => c_i(0), |
start => start_stage_i(0), |
reset => reset, |
--ready => stage_ready_i(0), |
done => stage_done_i(0), |
r => r_tot((s-1) downto 0) |
); |
|
stage_0: first_stage |
generic map(width => s |
) |
port map(core_clk => core_clk, |
my => my(s downto 0), |
y => y(s downto 0), |
m => m(s downto 0), |
xin => x_i(0), |
xout => x_i(1), |
qout => q_i(0), |
a_msb => a_i(s), |
cout => c_i(0), |
start => start_stage_i(0), |
reset => reset, |
--ready => stage_ready_i(0), |
done => stage_done_i(0), |
r => r_tot((s-1) downto 0) |
); |
stages_l : for i in 1 to (tl) generate |
standard_stages : standard_stage |
generic map( |
width => s |
) |
port map( |
core_clk => core_clk, |
my => my(((i+1)*s) downto ((s*i)+1)), |
y => y(((i+1)*s) downto ((s*i)+1)), |
m => m(((i+1)*s) downto ((s*i)+1)), |
xin => x_i(i), |
qin => q_i(i-1), |
xout => x_i(i+1), |
qout => q_i(i), |
a_msb => a_i((i+1)*s), |
cin => c_i(i-1), |
cout => c_i(i), |
start => start_stage_i(i), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(i), |
r => r_tot((((i+1)*s)-1) downto (s*i)) |
); |
end generate; |
|
stages_l: for i in 1 to (tl) generate |
standard_stages: standard_stage |
generic map(width => s |
) |
port map(core_clk => core_clk, |
my => my(((i+1)*s) downto ((s*i)+1)), |
y => y(((i+1)*s) downto ((s*i)+1)), |
m => m(((i+1)*s) downto ((s*i)+1)), |
xin => x_i(i), |
qin => q_i(i-1), |
xout => x_i(i+1), |
qout => q_i(i), |
a_msb => a_i((i+1)*s), |
cin => c_i(i-1), |
cout => c_i(i), |
start => start_stage_i(i), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(i), |
r => r_tot((((i+1)*s)-1) downto (s*i)) |
); |
end generate; |
|
h_c_1 <= h_c_0 or c_i(tl); |
h_q_1 <= h_q_0 or q_i(tl); |
h_x_1 <= h_x_0 or x_i(tl+1); |
|
stage_tl_1: standard_stage |
generic map(width => s |
) |
port map(core_clk => core_clk, |
my => my(((tl+2)*s) downto ((s*(tl+1))+1)), |
y => y(((tl+2)*s) downto ((s*(tl+1))+1)), |
m => m(((tl+2)*s) downto ((s*(tl+1))+1)), |
--xin => x_i(tl+1), |
xin => h_x_1, |
--qin => q_i(tl), |
qin => h_q_1, |
xout => x_i(tl+2), |
qout => q_i(tl+1), |
a_msb => a_i((tl+2)*s), |
--cin => c_i(tl), |
cin => h_c_1, |
cout => c_i(tl+1), |
start => start_stage_i(tl+1), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(tl+1), |
r => r_tot((((tl+2)*s)-1) downto (s*(tl+1))) |
); |
stage_tl_1 : standard_stage |
generic map( |
width => s |
) |
port map( |
core_clk => core_clk, |
my => my(((tl+2)*s) downto ((s*(tl+1))+1)), |
y => y(((tl+2)*s) downto ((s*(tl+1))+1)), |
m => m(((tl+2)*s) downto ((s*(tl+1))+1)), |
--xin => x_i(tl+1), |
xin => h_x_1, |
--qin => q_i(tl), |
qin => h_q_1, |
xout => x_i(tl+2), |
qout => q_i(tl+1), |
a_msb => a_i((tl+2)*s), |
--cin => c_i(tl), |
cin => h_c_1, |
cout => c_i(tl+1), |
start => start_stage_i(tl+1), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(tl+1), |
r => r_tot((((tl+2)*s)-1) downto (s*(tl+1))) |
); |
|
stages_h: for i in (tl+2) to (t-2) generate |
standard_stages: standard_stage |
generic map(width => s |
) |
port map(core_clk => core_clk, |
my => my(((i+1)*s) downto ((s*i)+1)), |
y => y(((i+1)*s) downto ((s*i)+1)), |
m => m(((i+1)*s) downto ((s*i)+1)), |
xin => x_i(i), |
qin => q_i(i-1), |
xout => x_i(i+1), |
qout => q_i(i), |
a_msb => a_i((i+1)*s), |
cin => c_i(i-1), |
cout => c_i(i), |
start => start_stage_i(i), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(i), |
r => r_tot((((i+1)*s)-1) downto (s*i)) |
); |
end generate; |
|
stage_t: last_stage |
generic map(width => s -- must be the same as width of the standard stage |
) |
port map(core_clk => core_clk, |
my => my(n downto ((n-s)+1)), --width-1 |
y => y((n-1) downto ((n-s)+1)), --width-2 |
m => m((n-1) downto ((n-s)+1)), --width-2 |
xin => x_i(t-1), |
qin => q_i(t-2), |
cin => c_i(t-2), |
start => start_stage_i(t-1), |
reset => reset, |
--ready => stage_ready_i(t-1), |
r => r_tot((n+1) downto (n-s)) --width+1 |
); |
stages_h : for i in (tl+2) to (t-2) generate |
standard_stages : standard_stage |
generic map( |
width => s |
) |
port map( |
core_clk => core_clk, |
my => my(((i+1)*s) downto ((s*i)+1)), |
y => y(((i+1)*s) downto ((s*i)+1)), |
m => m(((i+1)*s) downto ((s*i)+1)), |
xin => x_i(i), |
qin => q_i(i-1), |
xout => x_i(i+1), |
qout => q_i(i), |
a_msb => a_i((i+1)*s), |
cin => c_i(i-1), |
cout => c_i(i), |
start => start_stage_i(i), |
reset => reset, |
--ready => stage_ready_i(i), |
done => stage_done_i(i), |
r => r_tot((((i+1)*s)-1) downto (s*i)) |
); |
end generate; |
|
mid_start: first_stage |
generic map(width => s |
) |
port map(core_clk => core_clk, |
my => my((tl*s+s) downto tl*s), |
y => y((tl*s+s) downto tl*s), |
m => m((tl*s+s) downto tl*s), |
xin => x_i(0), |
xout => h_x_0, |
qout => h_q_0, |
a_msb => a_i((tl+1)*s), |
cout => h_c_0, |
start => start_higher_i, |
reset => reset, |
--ready => stage_ready_i(0), |
done => higher_0_done_i, |
r => r_h |
); |
|
mid_end: last_stage |
generic map(width => s -- must be the same as width of the standard stage |
) |
port map(core_clk => core_clk, |
my => my((tl*s) downto ((tl-1)*s)+1), --width-1 |
y => y(((tl*s)-1) downto ((tl-1)*s)+1), --width-2 |
m => m(((tl*s)-1) downto ((tl-1)*s)+1), --width-2 |
xin => x_i(tl-1), |
qin => q_i(tl-2), |
cin => c_i(tl-2), |
start => start_stage_i(tl-1), |
reset => reset, |
--ready => stage_ready_i(t-1), |
r => r_l --width+1 |
); |
stage_t : last_stage |
generic map( |
width => s -- must be the same as width of the standard stage |
) |
port map( |
core_clk => core_clk, |
my => my(n downto ((n-s)+1)), --width-1 |
y => y((n-1) downto ((n-s)+1)), --width-2 |
m => m((n-1) downto ((n-s)+1)), --width-2 |
xin => x_i(t-1), |
qin => q_i(t-2), |
cin => c_i(t-2), |
start => start_stage_i(t-1), |
reset => reset, |
--ready => stage_ready_i(t-1), |
r => r_tot((n+1) downto (n-s)) --width+1 |
); |
|
end Structural; |
mid_start : first_stage |
generic map( |
width => s |
) |
port map( |
core_clk => core_clk, |
my => my((tl*s+s) downto tl*s), |
y => y((tl*s+s) downto tl*s), |
m => m((tl*s+s) downto tl*s), |
xin => x_i(0), |
xout => h_x_0, |
qout => h_q_0, |
a_msb => a_i((tl+1)*s), |
cout => h_c_0, |
start => start_higher_i, |
reset => reset, |
--ready => stage_ready_i(0), |
done => higher_0_done_i, |
r => r_h |
); |
|
mid_end : last_stage |
generic map( |
width => s -- must be the same as width of the standard stage |
) |
port map( |
core_clk => core_clk, |
my => my((tl*s) downto ((tl-1)*s)+1), --width-1 |
y => y(((tl*s)-1) downto ((tl-1)*s)+1), --width-2 |
m => m(((tl*s)-1) downto ((tl-1)*s)+1), --width-2 |
xin => x_i(tl-1), |
qin => q_i(tl-2), |
cin => c_i(tl-2), |
start => start_stage_i(tl-1), |
reset => reset, |
--ready => stage_ready_i(t-1), |
r => r_l --width+1 |
); |
|
end Structural; |