URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/open8_urisc
- from Rev 188 to Rev 189
- ↔ Reverse comparison
Rev 188 → Rev 189
/trunk/VHDL/Open8_pkg.vhd
35,6 → 35,8
-- signals in the ALU and PC records. |
-- Seth Henry 03/17/20 Added new subtype and constants for external |
-- GP flags. |
-- Seth Henry 03/18/20 Added the ceil_log2 function, since it is used in |
-- memory sizing calculations. |
|
library ieee; |
use ieee.std_logic_1164.all; |
96,6 → 98,10
Wr_Enable : out std_logic ); |
end component; |
|
-- This function is used to calculate RAM parameters, but is generally |
-- useful for making things more generic. |
function ceil_log2 (x : in natural) return natural; |
|
------------------------------------------------------------------------------- |
-- Internal constants and type declarations. |
-- |
268,4 → 274,17
end Open8_pkg; |
|
package body Open8_pkg is |
|
-- The ceil_log2 function returns the minimum register width required to |
-- hold the supplied integer. |
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end ceil_log2; |
|
end package body; |
/trunk/VHDL/o8_btn_int.vhd
23,8 → 23,7
-- |
-- VHDL Units : o8_btn_int |
-- Description: Detects and reports when a user pushbutton is pressed with an |
-- interrupt. Software must clear the flag for additional |
-- interrupts to avoid inundating the processor. |
-- interrupt. |
|
library ieee; |
use ieee.std_logic_1164.all; |
/trunk/VHDL/o8_epoch_timer.vhd
1,4 → 1,4
-- Copyright (c)2013 Jeremy Seth Henry |
-- Copyright (c)2011, 2019 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
33,11 → 33,16
-- 0x0 AAAAAAAA B0 of Setpoint (W) or Buffered Time(R) |
-- 0x1 AAAAAAAA B1 of Setpoint (W) or Buffered Time(R) |
-- 0x2 AAAAAAAA B2 of Setpoint (W) or Buffered Time(R) |
-- 0x3 DC----BA Control/Status register (RW) |
-- 0x3 C-----BA Control/Status register (RW) |
-- A = Update Buffered Time from internal timer (W) |
-- B = Reset Internal Epoch Time (W) |
-- C = Interrupt Enable (RW) |
-- D = Alarm State Flag (RW) (write a 1 to clear) |
-- C = Alarm State Flag (RW) (write a 1 to clear) |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 07/28/11 Design Start |
-- Seth Henry 12/19/19 Renamed to "o8_epoch_timer" to fit "theme" |
|
library ieee; |
use ieee.std_logic_1164.all; |
88,8 → 93,6
signal epoch_alarm : std_logic; |
signal epoch_alarm_q : std_logic; |
|
signal epoch_gie : std_logic; |
|
begin |
|
Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; |
107,14 → 110,13
Wr_En <= '0'; |
Rd_En <= '0'; |
Rd_Data <= (others => '0'); |
epoch_gie <= '0'; |
Interrupt <= '0'; |
elsif( rising_edge( Clock ) )then |
epoch_tmr <= epoch_tmr + uSec_Tick; |
-- Force the lower bits of the setpoint to "11" so that the offset is |
-- reduced to 1uS (reproducing the original behavior). Software should |
-- always subtract 4uS (-1) from the desired time to compensate |
epoch_setpt(1 downto 0) <= "11"; |
-- Force the lower bits of the setpoint to "11" so that the offset is |
-- reduced to 1uS (reproducing the original behavior). Software should |
-- always subtract 4uS (-1) from the desired time to compensate |
epoch_setpt(1 downto 0) <= "11"; |
Reg_Addr_q <= Reg_Addr; |
Wr_Data_q <= Wr_Data; |
|
138,7 → 140,6
if( Wr_Data_q(1) = '1' )then |
epoch_tmr <= (others => '0'); |
end if; |
epoch_gie <= Wr_Data_q(6); |
if( Wr_Data_q(7) = '1' )then |
epoch_alarm <= '0'; |
end if; |
148,14 → 149,13
end if; |
|
-- Set and hold on alarm condition |
if( (epoch_tmr > epoch_setpt) and (epoch_alarm = '0') )then |
if( epoch_tmr > epoch_setpt )then |
epoch_alarm <= '1'; |
end if; |
|
epoch_alarm_q <= epoch_alarm; |
-- Fire on rising edge of epoch_alarm |
Interrupt <= epoch_gie and |
(epoch_alarm and not epoch_alarm_q); |
Interrupt <= epoch_alarm and not epoch_alarm_q; |
|
Rd_Data <= (others => '0'); |
Rd_En <= Addr_Match and Rd_Enable; |
168,8 → 168,7
when "10" => |
Rd_Data <= epoch_buffer(23 downto 16); |
when "11" => |
Rd_Data <= epoch_alarm & epoch_gie & |
"000000"; |
Rd_Data <= epoch_alarm & "0000000"; |
when others => null; |
end case; |
end if; |
/trunk/VHDL/o8_gpin.vhd
1,4 → 1,4
-- Copyright (c)2013 Jeremy Seth Henry |
-- Copyright (c)2006, 2016, 2019 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
23,6 → 23,15
-- |
-- VHDL Units : o8_gpin |
-- Description: Provides a single 8-bit input register |
-- |
-- Note: Cut the path between GPIN and GPIN_q1 for timing analysis |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 07/28/11 Design Start |
-- Seth Henry 12/19/19 Renamed to "o8_gpin" to fit "theme" |
-- Seth Henry 12/20/19 Added metastability registers |
|
library ieee; |
use ieee.std_logic_1164.all; |
53,6 → 62,9
alias Comp_Addr is Bus_Address(15 downto 0); |
signal Addr_Match : std_logic; |
signal Rd_En : std_logic; |
|
signal GPIN_q1 : DATA_TYPE; |
signal GPIN_q2 : DATA_TYPE; |
signal User_In : DATA_TYPE; |
|
begin |
64,8 → 76,13
if( Reset = Reset_Level )then |
Rd_En <= '0'; |
Rd_Data <= x"00"; |
GPIN_q1 <= x"00"; |
GPIN_q2 <= x"00"; |
User_In <= x"00"; |
elsif( rising_edge( Clock ) )then |
User_In <= GPIN; -- first stage of double buffer |
GPIN_q1 <= GPIN; |
GPIN_q2 <= GPIN_q1; |
User_In <= GPIN_q2; |
|
Rd_Data <= (others => '0'); |
Rd_En <= Addr_Match; |
/trunk/VHDL/o8_hd44780_4b.vhd
50,18 → 50,6
|
architecture behave of o8_hd44780_4b is |
|
-- The ceil_log2 function returns the minimum register width required to |
-- hold the supplied integer. |
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end ceil_log2; |
|
constant User_Addr : std_logic_vector(15 downto 2) |
:= Address(15 downto 2); |
alias Comp_Addr is Bus_Address(15 downto 2); |
/trunk/VHDL/o8_hd44780_8b.vhd
49,18 → 49,6
|
architecture behave of o8_hd44780_8b is |
|
-- The ceil_log2 function returns the minimum register width required to |
-- hold the supplied integer. |
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end ceil_log2; |
|
constant User_Addr : std_logic_vector(15 downto 2) |
:= Address(15 downto 2); |
alias Comp_Addr is Bus_Address(15 downto 2); |
/trunk/VHDL/o8_rtc.vhd
5,22 → 5,19
-- : to ensure time consistency during accesses. Also provides |
-- : a programmable periodic interrupt timer, as well as a uSec |
-- : tick for external use. |
-- |
-- |
-- Register Map: |
-- Offset Bitfield Description Read/Write |
-- 0x0 AAAAAAAA Periodic Interval Timer in uS (RW) |
-- 0x1 -AAAAAAA Tenths (0x00 - 0x99) (RW) |
-- 0x2 --AAAAAA Seconds (0x00 - 0x59) (RW) |
-- 0x3 --AAAAAA Minutes (0x00 - 0x59) (RW) |
-- 0x4 ---AAAAA Hours (0x00 - 0x23) (RW) |
-- 0x1 -AAAAAAA Tenths (0x00 - 0x63) (RW) |
-- 0x2 --AAAAAA Seconds (0x00 - 0x3B) (RW) |
-- 0x3 --AAAAAA Minutes (0x00 - 0x3B) (RW) |
-- 0x4 ---AAAAA Hours (0x00 - 0x17) (RW) |
-- 0x5 -----AAA Day of Week (0x00 - 0x06) (RW) |
-- 0x6 -------- Update RTC regs from Shadow Regs (WO) |
-- 0x7 A------- Update Shadow Regs from RTC regs (RW) |
-- A = Update is Busy |
-- |
-- Note that values are stored in packed BCD, not hex |
|
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
32,9 → 29,9
|
entity o8_rtc is |
generic( |
Address : ADDRESS_TYPE; |
Sys_Freq : real; |
Reset_Level : std_logic; |
Sys_Freq : real |
Address : ADDRESS_TYPE |
); |
port( |
Clock : in std_logic; |
54,18 → 51,6
|
architecture behave of o8_rtc is |
|
-- The ceil_log2 function returns the minimum register width required to |
-- hold the supplied integer. |
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end ceil_log2; |
|
constant User_Addr : std_logic_vector(15 downto 3) |
:= Address(15 downto 3); |
alias Comp_Addr is Bus_Address(15 downto 3); |
212,7 → 197,7
uSec_Tick_i <= '0'; |
if( uSec_Cntr = 0 )then |
uSec_Cntr <= DLY_1USEC; |
uSec_Tick_i <= '1'; |
uSec_Tick_i <= or_reduce(Interval); |
end if; |
|
pit.timer_ro <= '0'; |
/trunk/VHDL/o8_status_led.vhd
70,16 → 70,6
|
architecture behave of o8_status_led is |
|
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end function; |
|
constant User_Addr : std_logic_vector(15 downto 0) |
:= Address(15 downto 0); |
alias Comp_Addr is Bus_Address(15 downto 0); |
/trunk/VHDL/o8_sys_timer.vhd
78,18 → 78,6
signal Interval : DATA_TYPE; |
signal Timer_Cnt : DATA_TYPE; |
|
-- The ceil_log2 function returns the minimum register width required to |
-- hold the supplied integer. |
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end ceil_log2; |
|
constant DLY_1USEC_VAL: integer := integer(Sys_Freq / 1000000.0); |
constant DLY_1USEC_WDT: integer := ceil_log2(DLY_1USEC_VAL - 1); |
constant DLY_1USEC : std_logic_vector := |
/trunk/VHDL/o8_vdsm12.vhd
65,16 → 65,6
|
architecture behave of o8_vdsm12 is |
|
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end function; |
|
constant User_Addr : std_logic_vector(15 downto 2) |
:= Address(15 downto 2); |
alias Comp_Addr is Bus_Address(15 downto 2); |
/trunk/VHDL/o8_vdsm8.vhd
53,16 → 53,6
|
architecture behave of o8_vdsm8 is |
|
function ceil_log2 (x : in natural) return natural is |
variable retval : natural; |
begin |
retval := 1; |
while ((2**retval) - 1) < x loop |
retval := retval + 1; |
end loop; |
return retval; |
end function; |
|
constant User_Addr : std_logic_vector(15 downto 0) := Address; |
alias Comp_Addr is Bus_Address(15 downto 0); |
signal Addr_Match : std_logic; |