URL
https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk
Subversion Repositories open8_urisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/open8_urisc
- from Rev 241 to Rev 242
- ↔ Reverse comparison
Rev 241 → Rev 242
/trunk/VHDL/o8_ram_1k.vhd
1,96 → 1,204
-- Copyright (c)2013, 2020 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
-- modification, are permitted provided that the following conditions are met: |
-- * Redistributions of source code must retain the above copyright |
-- notice, this list of conditions and the following disclaimer. |
-- * Redistributions in binary form must reproduce the above copyright |
-- notice, this list of conditions and the following disclaimer in the |
-- documentation and/or other materials provided with the distribution, |
-- where applicable (as part of a user interface, debugging port, etc.) |
-- |
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY |
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY |
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
-- |
-- VHDL Units : o8_ram_1k |
-- Description: Provides a wrapper layer for a 1kx8 RAM model |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 04/16/20 Revision block added |
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
use ieee.std_logic_arith.all; |
|
library work; |
use work.open8_pkg.all; |
|
entity o8_ram_1k is |
generic( |
Address : ADDRESS_TYPE |
); |
port( |
Open8_Bus : in OPEN8_BUS_TYPE; |
Rd_Data : out DATA_TYPE |
); |
end entity; |
|
architecture behave of o8_ram_1k is |
|
alias Clock is Open8_Bus.Clock; |
alias Reset is Open8_Bus.Reset; |
|
constant User_Addr : std_logic_vector(15 downto 10) |
:= Address(15 downto 10); |
alias Comp_Addr is Open8_Bus.Address(15 downto 10); |
alias RAM_Addr is Open8_Bus.Address(9 downto 0); |
|
signal Addr_Match : std_logic := '0'; |
signal Wr_En : std_logic := '0'; |
signal Rd_En : std_logic := '0'; |
signal Rd_Data_i : DATA_TYPE := OPEN8_NULLBUS; |
|
begin |
|
-- This decode needs to happen immediately, to give the RAM a chance to |
-- do the lookup before we have to set Rd_Data |
Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; |
Wr_En <= Addr_Match and Open8_Bus.Wr_En; |
|
-- Note that this RAM should be created without an output FF (unregistered Q) |
U_RAM : entity work.ram_1k_core |
port map( |
address => RAM_Addr, |
clock => Clock, |
data => Open8_Bus.Wr_Data, |
wren => Wr_En, |
q => Rd_Data_i |
); |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
Rd_En <= Addr_Match and Open8_Bus.Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( Rd_En = '1' )then |
Rd_Data <= Rd_Data_i; |
end if; |
end if; |
end process; |
|
end architecture; |
-- Copyright (c)2013, 2020 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
-- modification, are permitted provided that the following conditions are met: |
-- * Redistributions of source code must retain the above copyright |
-- notice, this list of conditions and the following disclaimer. |
-- * Redistributions in binary form must reproduce the above copyright |
-- notice, this list of conditions and the following disclaimer in the |
-- documentation and/or other materials provided with the distribution, |
-- where applicable (as part of a user interface, debugging port, etc.) |
-- |
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY |
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY |
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
-- |
-- VHDL Units : o8_ram_1k |
-- Description: Provides a wrapper layer for a 1kx8 RAM model with interface |
-- : logic for the Open8 CPU. Also provides an optional write |
-- : enable register that prevents regions from being written |
-- : by non-ISR code (uses the I flag) as a way to prevent tasks |
-- : from inadvertently writing outside of their designated |
-- : memory space. |
-- : When enabled, the write mask logically divides the memory into |
-- : 16, 64 byte regions, corresponding to the 16 bits in the WPR |
-- : register. |
-- |
-- WP Register Map: |
-- Offset Bitfield Description Read/Write |
-- 0x00 AAAAAAAA Region Enables 7:0 (RW) |
-- 0x01 AAAAAAAA Region Enables 15:8 (RW) |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 04/16/20 Revision block added |
-- Seth Henry 05/12/20 Added write protect logic |
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
use ieee.std_logic_arith.all; |
|
library work; |
use work.open8_pkg.all; |
|
entity o8_ram_1k is |
generic( |
Write_Protect : boolean := FALSE; |
Default_Mask : ADDRESS_TYPE := x"0000"; |
Address_WPR : ADDRESS_TYPE := x"0400"; |
Address_RAM : ADDRESS_TYPE |
); |
port( |
Open8_Bus : in OPEN8_BUS_TYPE; |
Rd_Data : out DATA_TYPE |
); |
end entity; |
|
architecture behave of o8_ram_1k is |
|
alias Clock is Open8_Bus.Clock; |
alias Reset is Open8_Bus.Reset; |
alias ISR_En is Open8_Bus.GP_Flags(EXT_ISR); |
alias Wr_En is Open8_Bus.Wr_En; |
alias Rd_En is Open8_Bus.Rd_En; |
|
constant WPR_User_Addr : std_logic_vector(15 downto 1) |
:= Address_WPR(15 downto 1); |
|
constant RAM_User_Addr : std_logic_vector(15 downto 10) |
:= Address_RAM(15 downto 10); |
|
alias WPR_Comp_Addr is Open8_Bus.Address(15 downto 1); |
signal WPR_Addr_Match : std_logic := '0'; |
|
alias WPR_Reg_Sel_d is Open8_Bus.Address(0); |
signal WPR_Reg_Sel : std_logic := '0'; |
|
alias Wr_Data_d is Open8_Bus.Wr_Data; |
signal Wr_Data : DATA_TYPE := x"00"; |
|
signal Write_Mask : std_logic_vector(15 downto 0) := |
x"0000"; |
alias Write_Mask_0 is Write_Mask(7 downto 0); |
alias Write_Mask_1 is Write_Mask(15 downto 8); |
|
signal WPR_Wr_En : std_logic := '0'; |
signal WPR_Rd_En : std_logic := '0'; |
|
alias RAM_Base_Addr is Open8_Bus.Address(15 downto 10); |
alias RAM_Addr is Open8_Bus.Address(9 downto 0); |
|
alias RAM_Rgn_Addr is Open8_Bus.Address(9 downto 6); |
|
signal RAM_Region_Match : std_logic := '0'; |
signal RAM_Addr_Match : std_logic := '0'; |
|
signal RAM_Wr_En : std_logic := '0'; |
signal RAM_Rd_En : std_logic := '0'; |
signal RAM_Rd_Data : DATA_TYPE := OPEN8_NULLBUS; |
|
begin |
|
Write_Protect_On : if( Write_Protect )generate |
|
WPR_Addr_Match <= '1' when WPR_Comp_Addr = WPR_User_Addr else '0'; |
|
RAM_Addr_Match <= '1' when RAM_Base_Addr = RAM_User_Addr else '0'; |
|
RAM_Region_Match <= Write_Mask(conv_integer(RAM_Rgn_Addr)) or |
ISR_En; |
|
RAM_Wr_En <= RAM_Addr_Match and RAM_Region_Match and Wr_En; |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
Write_Mask <= Default_Mask; |
|
WPR_Reg_Sel <= '0'; |
|
WPR_Wr_En <= '0'; |
WPR_Rd_En <= '0'; |
|
RAM_Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
WPR_Reg_Sel <= WPR_Reg_Sel_d; |
|
WPR_Wr_En <= WPR_Addr_Match and Wr_En and ISR_En; |
Wr_Data <= Wr_Data_d; |
if( WPR_Wr_En = '1' )then |
case( WPR_Reg_Sel )is |
when '0' => |
Write_Mask_0 <= Wr_Data; |
when '1' => |
Write_Mask_1 <= Wr_Data; |
when others => |
null; |
end case; |
end if; |
|
WPR_Rd_En <= WPR_Addr_Match and Rd_En; |
RAM_Rd_En <= RAM_Addr_Match and Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( WPR_Rd_En = '1' )then |
case( WPR_Reg_Sel )is |
when '0' => |
Rd_Data <= Write_Mask_0; |
when '1' => |
Rd_Data <= Write_Mask_1; |
when others => |
null; |
end case; |
end if; |
if( RAM_Rd_En = '1' )then |
Rd_Data <= RAM_Rd_Data; |
end if; |
end if; |
end process; |
|
end generate; |
|
Write_Protect_Off : if( not Write_Protect )generate |
|
RAM_Addr_Match <= '1' when RAM_Base_Addr = RAM_User_Addr else '0'; |
|
RAM_Wr_En <= RAM_Addr_Match and Open8_Bus.Wr_En; |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
RAM_Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
RAM_Rd_En <= RAM_Addr_Match and Open8_Bus.Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( RAM_Rd_En = '1' )then |
Rd_Data <= RAM_Rd_Data; |
end if; |
end if; |
end process; |
|
end generate; |
|
-- Note that this RAM should be created without an output FF (unregistered Q) |
U_RAM : entity work.ram_1k_core |
port map( |
address => RAM_Addr, |
clock => Clock, |
data => Wr_Data_d, |
wren => RAM_Wr_En, |
q => RAM_Rd_Data |
); |
|
end architecture; |
/trunk/VHDL/o8_ram_4k.vhd
1,96 → 1,219
-- Copyright (c)2013, 2020 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
-- modification, are permitted provided that the following conditions are met: |
-- * Redistributions of source code must retain the above copyright |
-- notice, this list of conditions and the following disclaimer. |
-- * Redistributions in binary form must reproduce the above copyright |
-- notice, this list of conditions and the following disclaimer in the |
-- documentation and/or other materials provided with the distribution, |
-- where applicable (as part of a user interface, debugging port, etc.) |
-- |
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY |
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY |
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
-- |
-- VHDL Units : o8_ram_1k |
-- Description: Provides a wrapper layer for a 1kx8 RAM model |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 04/16/20 Revision block added |
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
use ieee.std_logic_arith.all; |
|
library work; |
use work.open8_pkg.all; |
|
entity o8_ram_4k is |
generic( |
Address : ADDRESS_TYPE |
); |
port( |
Open8_Bus : in OPEN8_BUS_TYPE; |
Rd_Data : out DATA_TYPE |
); |
end entity; |
|
architecture behave of o8_ram_4k is |
|
alias Clock is Open8_Bus.Clock; |
alias Reset is Open8_Bus.Reset; |
|
constant User_Addr : std_logic_vector(15 downto 12) |
:= Address(15 downto 12); |
alias Comp_Addr is Open8_Bus.Address(15 downto 12); |
alias RAM_Addr is Open8_Bus.Address(11 downto 0); |
|
signal Addr_Match : std_logic := '0'; |
signal Wr_En : std_logic := '0'; |
signal Rd_En : std_logic := '0'; |
signal Rd_Data_i : DATA_TYPE := OPEN8_NULLBUS; |
|
begin |
|
-- This decode needs to happen immediately, to give the RAM a chance to |
-- do the lookup before we have to set Rd_Data |
Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; |
Wr_En <= Addr_Match and Open8_Bus.Wr_En; |
|
-- Note that this RAM should be created without an output FF (unregistered Q) |
U_RAM : entity work.ram_4k_core |
port map( |
address => RAM_Addr, |
clock => Clock, |
data => Open8_Bus.Wr_Data, |
wren => Wr_En, |
q => Rd_Data_i |
); |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
Rd_En <= Addr_Match and Open8_Bus.Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( Rd_En = '1' )then |
Rd_Data <= Rd_Data_i; |
end if; |
end if; |
end process; |
|
end architecture; |
-- Copyright (c)2013, 2020 Jeremy Seth Henry |
-- All rights reserved. |
-- |
-- Redistribution and use in source and binary forms, with or without |
-- modification, are permitted provided that the following conditions are met: |
-- * Redistributions of source code must retain the above copyright |
-- notice, this list of conditions and the following disclaimer. |
-- * Redistributions in binary form must reproduce the above copyright |
-- notice, this list of conditions and the following disclaimer in the |
-- documentation and/or other materials provided with the distribution, |
-- where applicable (as part of a user interface, debugging port, etc.) |
-- |
-- THIS SOFTWARE IS PROVIDED BY JEREMY SETH HENRY ``AS IS'' AND ANY |
-- EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
-- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
-- DISCLAIMED. IN NO EVENT SHALL JEREMY SETH HENRY BE LIABLE FOR ANY |
-- DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
-- (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
-- LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
-- ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
-- (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF |
-- THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
-- |
-- VHDL Units : o8_ram_4k |
-- Description: Provides a wrapper layer for a 4kx8 RAM model with interface |
-- : logic for the Open8 CPU. Also provides an optional write |
-- : enable register that prevents regions from being written |
-- : by non-ISR code (uses the I flag) as a way to prevent tasks |
-- : from inadvertently writing outside of their designated |
-- : memory space. |
-- : When enabled, the write mask logically divides the memory into |
-- : 32, 128 byte regions, corresponding to the 32 bits in the WPR |
-- : register. |
-- |
-- WP Register Map: |
-- Offset Bitfield Description Read/Write |
-- 0x00 AAAAAAAA Region Enables 7:0 (RW) |
-- 0x01 AAAAAAAA Region Enables 15:8 (RW) |
-- 0x02 AAAAAAAA Region Enables 23:16 (RW) |
-- 0x03 AAAAAAAA Region Enables 31:24 (RW) |
-- |
-- Revision History |
-- Author Date Change |
------------------ -------- --------------------------------------------------- |
-- Seth Henry 04/16/20 Revision block added |
-- Seth Henry 05/12/20 Added write protect logic |
|
library ieee; |
use ieee.std_logic_1164.all; |
use ieee.std_logic_unsigned.all; |
use ieee.std_logic_arith.all; |
|
library work; |
use work.open8_pkg.all; |
|
entity o8_ram_4k is |
generic( |
Write_Protect : boolean := FALSE; |
Default_Mask : std_logic_vector(31 downto 0) := x"00000000"; |
Address_WPR : ADDRESS_TYPE := x"1000"; |
Address_RAM : ADDRESS_TYPE |
); |
port( |
Open8_Bus : in OPEN8_BUS_TYPE; |
Rd_Data : out DATA_TYPE |
); |
end entity; |
|
architecture behave of o8_ram_4k is |
|
alias Clock is Open8_Bus.Clock; |
alias Reset is Open8_Bus.Reset; |
alias ISR_En is Open8_Bus.GP_Flags(EXT_ISR); |
alias Wr_En is Open8_Bus.Wr_En; |
alias Rd_En is Open8_Bus.Rd_En; |
|
constant WPR_User_Addr : std_logic_vector(15 downto 2) |
:= Address_WPR(15 downto 2); |
|
constant RAM_User_Addr : std_logic_vector(15 downto 12) |
:= Address_RAM(15 downto 12); |
|
alias WPR_Comp_Addr is Open8_Bus.Address(15 downto 2); |
signal WPR_Addr_Match : std_logic := '0'; |
|
alias WPR_Reg_Sel_d is Open8_Bus.Address(1 downto 0); |
signal WPR_Reg_Sel : std_logic_vector(1 downto 0) := |
(others => '0'); |
|
alias Wr_Data_d is Open8_Bus.Wr_Data; |
signal Wr_Data : DATA_TYPE := x"00"; |
|
signal Write_Mask : std_logic_vector(31 downto 0) := |
x"00000000"; |
alias Write_Mask_0 is Write_Mask( 7 downto 0); |
alias Write_Mask_1 is Write_Mask(15 downto 8); |
alias Write_Mask_2 is Write_Mask(23 downto 16); |
alias Write_Mask_3 is Write_Mask(31 downto 24); |
|
signal WPR_Wr_En_d : std_logic := '0'; |
signal WPR_Wr_En : std_logic := '0'; |
signal WPR_Rd_En_d : std_logic := '0'; |
signal WPR_Rd_En : std_logic := '0'; |
|
alias RAM_Base_Addr is Open8_Bus.Address(15 downto 12); |
alias RAM_Addr is Open8_Bus.Address(11 downto 0); |
|
alias RAM_Rgn_Addr is Open8_Bus.Address(11 downto 7); |
|
signal RAM_Region_Match : std_logic := '0'; |
signal RAM_Addr_Match : std_logic := '0'; |
|
signal RAM_Wr_En : std_logic := '0'; |
signal RAM_Rd_En : std_logic := '0'; |
signal RAM_Rd_Data : DATA_TYPE := OPEN8_NULLBUS; |
|
begin |
|
Write_Protect_On : if( Write_Protect )generate |
|
WPR_Addr_Match <= '1' when WPR_Comp_Addr = WPR_User_Addr else '0'; |
|
RAM_Addr_Match <= '1' when RAM_Base_Addr = RAM_User_Addr else '0'; |
|
RAM_Region_Match <= Write_Mask(conv_integer(RAM_Rgn_Addr)) or |
ISR_En; |
|
RAM_Wr_En <= RAM_Addr_Match and RAM_Region_Match and Wr_En; |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
Write_Mask <= Default_Mask; |
|
WPR_Reg_Sel <= (others => '0'); |
|
WPR_Wr_En <= '0'; |
WPR_Rd_En <= '0'; |
|
RAM_Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
WPR_Reg_Sel <= WPR_Reg_Sel_d; |
|
WPR_Wr_En <= WPR_Addr_Match and Wr_En and ISR_En; |
Wr_Data <= Wr_Data_d; |
if( WPR_Wr_En = '1' )then |
case( WPR_Reg_Sel )is |
when "00" => |
Write_Mask_0 <= Wr_Data; |
when "01" => |
Write_Mask_1 <= Wr_Data; |
when "10" => |
Write_Mask_2 <= Wr_Data; |
when "11" => |
Write_Mask_3 <= Wr_Data; |
when others => |
null; |
end case; |
end if; |
|
WPR_Rd_En <= WPR_Addr_Match and Rd_En; |
RAM_Rd_En <= RAM_Addr_Match and Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( WPR_Rd_En = '1' )then |
case( WPR_Reg_Sel )is |
when "00" => |
Rd_Data <= Write_Mask_0; |
when "01" => |
Rd_Data <= Write_Mask_1; |
when "10" => |
Rd_Data <= Write_Mask_2; |
when "11" => |
Rd_Data <= Write_Mask_3; |
when others => |
null; |
end case; |
end if; |
if( RAM_Rd_En = '1' )then |
Rd_Data <= RAM_Rd_Data; |
end if; |
end if; |
end process; |
|
end generate; |
|
Write_Protect_Off : if( not Write_Protect )generate |
|
RAM_Addr_Match <= '1' when RAM_Base_Addr = RAM_User_Addr else '0'; |
|
RAM_Wr_En <= RAM_Addr_Match and Open8_Bus.Wr_En; |
|
RAM_proc: process( Reset, Clock ) |
begin |
if( Reset = Reset_Level )then |
RAM_Rd_En <= '0'; |
Rd_Data <= OPEN8_NULLBUS; |
elsif( rising_edge(Clock) )then |
RAM_Rd_En <= RAM_Addr_Match and Open8_Bus.Rd_En; |
Rd_Data <= OPEN8_NULLBUS; |
if( RAM_Rd_En = '1' )then |
Rd_Data <= RAM_Rd_Data; |
end if; |
end if; |
end process; |
|
end generate; |
|
-- Note that this RAM should be created without an output FF (unregistered Q) |
U_RAM : entity work.ram_4k_core |
port map( |
address => RAM_Addr, |
clock => Clock, |
data => Wr_Data_d, |
wren => RAM_Wr_En, |
q => RAM_Rd_Data |
); |
|
end architecture; |
/trunk/VHDL/o8_sys_timer.vhd
25,7 → 25,10
-- Description: Provides an 8-bit microsecond resolution timer for generating |
-- : periodic interrupts for the Open8 CPU. |
-- |
-- Notes : Setting the output to 0x00 will disable the timer |
-- Notes : It is possible to set the value to zero, resulting in the |
-- : output staying high indefinitely. This may cause an issue if |
-- : the output is connected to an interrupt input. |
-- : Also provides uSec_Tick as an output |
-- |
-- Revision History |
-- Author Date Change |
47,6 → 50,7
|
entity o8_sys_timer is |
generic( |
Write_Protect : boolean := FALSE; |
Address : ADDRESS_TYPE |
); |
port( |
61,7 → 65,13
alias Clock is Open8_Bus.Clock; |
alias Reset is Open8_Bus.Reset; |
alias uSec_Tick is Open8_Bus.uSec_Tick; |
alias ISR_En is Open8_Bus.GP_Flags(EXT_ISR); |
|
signal Wr_En_d : std_logic; |
signal Rd_En_d : std_logic; |
|
alias Wr_Data is Open8_Bus.Wr_Data; |
|
constant User_Addr : ADDRESS_TYPE := Address; |
alias Comp_Addr is Open8_Bus.Address(15 downto 0); |
signal Addr_Match : std_logic := '0'; |
78,6 → 88,19
|
Addr_Match <= '1' when Comp_Addr = User_Addr else '0'; |
|
-- If the Write_Protect generic is set only allow the memory to be written |
-- if the ISR bit is set. Otherwise, the memory should be read-only |
|
Write_Protect_On : if( Write_Protect )generate |
Wr_En_d <= Addr_Match and Open8_Bus.Wr_En and ISR_En; |
end generate; |
|
Write_Protect_Off : if( not Write_Protect )generate |
Wr_En_d <= Addr_Match and Open8_Bus.Wr_En; |
end generate; |
|
Rd_En_d <= Addr_Match and Open8_Bus.Rd_En; |
|
io_reg: process( Clock, Reset ) |
begin |
if( Reset = Reset_Level )then |
88,16 → 111,16
Interval <= x"00"; |
Update_Interval <= '0'; |
elsif( rising_edge( Clock ) )then |
Wr_En <= Addr_Match and Open8_Bus.Wr_En; |
Wr_Data_q <= Open8_Bus.Wr_Data; |
Update_Interval <= '0'; |
Wr_En <= Wr_En_d; |
Wr_Data_q <= Wr_Data; |
|
Update_Interval <= Wr_En; |
if( Wr_En = '1' )then |
Interval <= Wr_Data_q; |
Update_Interval <= '1'; |
end if; |
|
Rd_Data <= OPEN8_NULLBUS; |
Rd_En <= Addr_Match and Open8_Bus.Rd_En; |
Rd_Data <= (others => '0'); |
Rd_En <= Rd_En_d; |
if( Rd_En = '1' )then |
Rd_Data <= Interval; |
end if; |