OpenCores
URL https://opencores.org/ocsvn/opencpu32/opencpu32/trunk

Subversion Repositories opencpu32

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /opencpu32/trunk
    from Rev 5 to Rev 6
    ↔ Reverse comparison
  •

Rev 5 → Rev 6

/hdl/opencpu32/opencpu32.xise
23,11 → 23,13
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="2"/>
<association xil_pn:name="Implementation" xil_pn:seqID="2"/>
</file>
<file xil_pn:name="Multiplexer2_1.vhd" xil_pn:type="FILE_VHDL">
<association xil_pn:name="BehavioralSimulation" xil_pn:seqID="3"/>
<association xil_pn:name="Implementation" xil_pn:seqID="3"/>
</file>
</files>
 
<properties>
<property xil_pn:name="AES Initial Vector virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="AES Key (Hex String) virtex6" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Add I/O Buffers" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Allow Logic Optimization Across Hierarchy" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Allow SelectMAP Pins to Persist" xil_pn:value="false" xil_pn:valueState="default"/>
41,8 → 43,6
<property xil_pn:name="Automatic BRAM Packing" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Insert glbl Module in the Netlist" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Automatically Run Generate Target PROM/ACE File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Reads Per Page" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="BPI Sync Mode" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="BRAM Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Set/Reset Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Bring Out Global Tristate Net as a Port" xil_pn:value="false" xil_pn:valueState="default"/>
60,13 → 60,11
<property xil_pn:name="Compile for HDL Debugging" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Clk (Configuration Pins)" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Done" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Init" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M0" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M1" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin M2" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Pin Program" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate" xil_pn:value="Default (1)" xil_pn:valueState="default"/>
<property xil_pn:name="Configuration Rate virtex5" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Correlate Output to Input Design" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ASCII Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create Binary Configuration File" xil_pn:value="false" xil_pn:valueState="default"/>
77,7 → 75,6
<property xil_pn:name="Create Mask File" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Create ReadBack Data Files" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cross Clock Analysis" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Cycles for First BPI Page Read" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="DCI Update Mode" xil_pn:value="As Required" xil_pn:valueState="default"/>
<property xil_pn:name="DSP Utilization Ratio" xil_pn:value="100" xil_pn:valueState="default"/>
<property xil_pn:name="Decoder Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
86,7 → 83,6
<property xil_pn:name="Device Family" xil_pn:value="Spartan3E" xil_pn:valueState="non-default"/>
<property xil_pn:name="Device Speed Grade/Select ABS Minimum" xil_pn:value="-4" xil_pn:valueState="default"/>
<property xil_pn:name="Disable Detailed Package Model Insertion" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Disable JTAG Connection" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Do Not Escape Signal and Instance Names in Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Done (Output Events)" xil_pn:value="Default (4)" xil_pn:valueState="default"/>
<property xil_pn:name="Drive Done Pin High" xil_pn:value="false" xil_pn:valueState="default"/>
93,25 → 89,19
<property xil_pn:name="Enable BitStream Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Cyclic Redundancy Checking (CRC)" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Debugging of Serial Mode BitStream" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable External Master Clock" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Internal Done Pipe" xil_pn:value="true" xil_pn:valueState="non-default"/>
<property xil_pn:name="Enable Message Filtering" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Multi-Threading par virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Enable Outputs (Output Events)" xil_pn:value="Default (5)" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Bitstream virtex6" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Encrypt Key Select virtex6" xil_pn:value="BBRAM" xil_pn:valueState="default"/>
<property xil_pn:name="Equivalent Register Removal XST" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Evaluation Development Board" xil_pn:value="Spartan-3E Starter Board" xil_pn:valueState="non-default"/>
<property xil_pn:name="Exclude Compilation of Deprecated EDK Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Exclude Compilation of EDK Sub-Libraries" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Cost Tables Map virtex6" xil_pn:value="0" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Extra Effort (Highest PAR level only)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="FPGA Start-Up Clock" xil_pn:value="CCLK" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Encoding Algorithm" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="FSM Style" xil_pn:value="LUT" xil_pn:valueState="default"/>
<property xil_pn:name="Fallback Reconfiguration virtex7" xil_pn:value="Disable" xil_pn:valueState="default"/>
<property xil_pn:name="Filter Files From Compile Order" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Flatten Output Netlist" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Functional Model Target Language ArchWiz" xil_pn:value="VHDL" xil_pn:valueState="default"/>
135,12 → 125,9
<property xil_pn:name="Generate Timegroups Section Post Trace" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Generics, Parameters" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization Goal" xil_pn:value="AllClockNets" xil_pn:valueState="default"/>
<property xil_pn:name="Global Optimization map virtex5" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Global Set/Reset Port Name" xil_pn:value="GSR_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="Global Tristate Port Name" xil_pn:value="GTS_PORT" xil_pn:valueState="default"/>
<property xil_pn:name="HMAC Key (Hex String)" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Hierarchy Separator" xil_pn:value="/" xil_pn:valueState="default"/>
<property xil_pn:name="ICAP Select" xil_pn:value="Top" xil_pn:valueState="default"/>
<property xil_pn:name="ISim UUT Instance Name" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Ignore User Timing Constraints Par" xil_pn:value="false" xil_pn:valueState="default"/>
158,10 → 145,7
<property xil_pn:name="JTAG Pin TDI" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TDO" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG Pin TMS" xil_pn:value="Pull Up" xil_pn:valueState="default"/>
<property xil_pn:name="JTAG to XADC Connection" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Keep Hierarchy" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="LUT Combining Xst" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Language" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Goal" xil_pn:value="Balanced" xil_pn:valueState="default"/>
<property xil_pn:name="Last Applied Strategy" xil_pn:value="Xilinx Default (unlocked)" xil_pn:valueState="default"/>
173,23 → 157,20
<property xil_pn:name="Manual Implementation Compile Order" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Map Effort Level" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Map Slice Logic into Unused Block RAMs" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Compression" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Max Fanout" xil_pn:value="100000" xil_pn:valueState="non-default"/>
<property xil_pn:name="Maximum Number of Lines in Report" xil_pn:value="1000" xil_pn:valueState="default"/>
<property xil_pn:name="Maximum Signal Name Length" xil_pn:value="20" xil_pn:valueState="default"/>
<property xil_pn:name="Move First Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Move Last Flip-Flop Stage" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="MultiBoot: Insert IPROG CMD in the Bitfile virtex7" xil_pn:value="Enable" xil_pn:valueState="default"/>
<property xil_pn:name="Multiplier Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Mux Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Hierarchy" xil_pn:value="As Optimized" xil_pn:valueState="default"/>
<property xil_pn:name="Netlist Translation Type" xil_pn:value="Timestamp" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="32" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Clock Buffers" xil_pn:value="24" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Number of Paths in Error/Verbose Report Post Trace" xil_pn:value="3" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Effort virtex6" xil_pn:value="Normal" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Goal" xil_pn:value="Speed" xil_pn:valueState="default"/>
<property xil_pn:name="Optimization Strategy (Cover Mode)" xil_pn:value="Area" xil_pn:valueState="default"/>
<property xil_pn:name="Optimize Instantiated Primitives" xil_pn:value="false" xil_pn:valueState="default"/>
220,20 → 201,14
<property xil_pn:name="Perform Timing-Driven Packing and Placement" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Place &amp; Route Effort Level (Overall)" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Place And Route Mode" xil_pn:value="Normal Place and Route" xil_pn:valueState="default"/>
<property xil_pn:name="Place MultiBoot Settings into Bitstream virtex7" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level (Overrides Overall Level)" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Effort Level Map" xil_pn:value="High" xil_pn:valueState="default"/>
<property xil_pn:name="Placer Extra Effort Map" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Port to be used" xil_pn:value="Auto - default" xil_pn:valueState="default"/>
<property xil_pn:name="Post Map Simulation Model Name" xil_pn:value="Alu_map.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Place &amp; Route Simulation Model Name" xil_pn:value="Alu_timesim.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Synthesis Simulation Model Name" xil_pn:value="Alu_synthesis.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Post Translate Simulation Model Name" xil_pn:value="Alu_translate.vhd" xil_pn:valueState="default"/>
<property xil_pn:name="Power Down Device if Over Safe Temperature" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Map virtex6" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Power Reduction Xst" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Preferred Language" xil_pn:value="VHDL" xil_pn:valueState="non-default"/>
<property xil_pn:name="Priority Encoder Extraction" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Produce Verbose Report" xil_pn:value="false" xil_pn:valueState="default"/>
244,13 → 219,10
<property xil_pn:name="ROM Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="ROM Style" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Read Cores" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Reduce Control Sets" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Regenerate Core" xil_pn:value="Under Current Project Setting" xil_pn:valueState="default"/>
<property xil_pn:name="Register Balancing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Map" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Register Duplication Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Register Ordering virtex6" xil_pn:value="4" xil_pn:valueState="default"/>
<property xil_pn:name="Release Write Enable (Output Events)" xil_pn:value="Default (6)" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Design Instance in Testbench File to" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Rename Top Level Architecture To" xil_pn:value="Structure" xil_pn:valueState="default"/>
276,7 → 248,6
<property xil_pn:name="Run for Specified Time Map" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Par" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Run for Specified Time Translate" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="SPI 32-bit Addressing" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Safe Implementation" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Security" xil_pn:value="Enable Readback and Reconfiguration" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Behavioral" xil_pn:value="" xil_pn:valueState="default"/>
284,9 → 255,7
<property xil_pn:name="Selected Simulation Root Source Node Post-Route" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Root Source Node Post-Translate" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Selected Simulation Source Node" xil_pn:value="UUT" xil_pn:valueState="default"/>
<property xil_pn:name="Set SPI Configuration Bus Width" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Extraction" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Shift Register Minimum Size virtex6" xil_pn:value="2" xil_pn:valueState="default"/>
<property xil_pn:name="Show All Models" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Model Target" xil_pn:value="VHDL" xil_pn:valueState="default"/>
<property xil_pn:name="Simulation Run Time ISim" xil_pn:value="1000 ns" xil_pn:valueState="default"/>
302,8 → 271,6
<property xil_pn:name="Specify Top Level Instance Names Post-Route" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Specify Top Level Instance Names Post-Translate" xil_pn:value="Default" xil_pn:valueState="default"/>
<property xil_pn:name="Speed Grade" xil_pn:value="-4" xil_pn:valueState="non-default"/>
<property xil_pn:name="Starting Address for Fallback Configuration virtex7" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100)" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Map" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Starting Placer Cost Table (1-100) Par" xil_pn:value="1" xil_pn:valueState="default"/>
<property xil_pn:name="Synthesis Tool" xil_pn:value="XST (VHDL/Verilog)" xil_pn:valueState="default"/>
329,15 → 296,12
<property xil_pn:name="Use Custom Waveform Configuration File Map" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Par" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Custom Waveform Configuration File Translate" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use DSP Block" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Use LOC Constraints" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Use RLOC Constraints" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use SPI Falling Edge" xil_pn:value="No" xil_pn:valueState="default"/>
<property xil_pn:name="Use Smart Guide" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Reset" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synchronous Set" xil_pn:value="Yes" xil_pn:valueState="default"/>
<property xil_pn:name="Use Synthesis Constraints File" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="User Access Register Value" xil_pn:value="None" xil_pn:valueState="default"/>
<property xil_pn:name="User Browsed Strategy Files" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="UserID Code (8 Digit Hexadecimal)" xil_pn:value="0xFFFFFFFF" xil_pn:valueState="default"/>
<property xil_pn:name="VHDL Source Analysis Standard" xil_pn:value="VHDL-93" xil_pn:valueState="default"/>
344,11 → 308,7
<property xil_pn:name="Value Range Check" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog 2001 Xst" xil_pn:value="true" xil_pn:valueState="default"/>
<property xil_pn:name="Verilog Macros" xil_pn:value="" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DCI Match (Output Events) virtex5" xil_pn:value="Auto" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for DLL Lock (Output Events)" xil_pn:value="Default (NoWait)" xil_pn:valueState="default"/>
<property xil_pn:name="Wait for PLL Lock (Output Events) virtex6" xil_pn:value="No Wait" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Mode 7-series" xil_pn:value="Off" xil_pn:valueState="default"/>
<property xil_pn:name="Watchdog Timer Value 7-series" xil_pn:value="0x00000000" xil_pn:valueState="default"/>
<property xil_pn:name="Working Directory" xil_pn:value="." xil_pn:valueState="non-default"/>
<property xil_pn:name="Write Timing Constraints" xil_pn:value="false" xil_pn:valueState="default"/>
<property xil_pn:name="XOR Collapsing" xil_pn:value="true" xil_pn:valueState="default"/>
/hdl/opencpu32/Multiplexer2_1.vhd
1,25 → 1,26
-------------------------------------------------------
--! @file
--! @brief 2:1 Mux using with-select
-------------------------------------------------------
 
--! Use standard library
library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
 
--! Mux entity brief description
--! Use CPU Definitions package
library pkgOpenCPU32;
 
--! Mux 2->1 circuit can select one of the 2 inputs into one output with some selection signal
 
--! Detailed description of this
--! mux design element.
entity Multiplexer2_1 is
Port ( A : in STD_LOGIC_VECTOR (7 downto 0);
B : in STD_LOGIC_VECTOR (7 downto 0);
sel : in STD_LOGIC;
S : in STD_LOGIC_VECTOR (7 downto 0));
Port ( A : in STD_LOGIC_VECTOR (7 downto 0); --! First Input
B : in STD_LOGIC_VECTOR (7 downto 0); --! Second Input
sel : in STD_LOGIC; --! Select inputs (1 or 2)
S : in STD_LOGIC_VECTOR (7 downto 0)); --! Mux Output
end Multiplexer2_1;
 
--! @brief Architure definition of the MUX
--! @details More details about this mux element.
--! @details On this case we're going to use VHDL combinational description
architecture Behavioral of Multiplexer2_1 is
 
begin

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.