URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/tags/gdb/gdb-6.8/gdb-6.8.openrisc-2.1/gdb/config/djgpp
- from Rev 24 to Rev 33
- ↔ Reverse comparison
Rev 24 → Rev 33
/config.sed
0,0 → 1,53
s|po2tbl\.sed\.in|po2tblsed.in|g |
s|gdb\.c++|gdb.cxx|g |
/ac_rel_source/s|ln -s|cp -p| |
s|\.gdbinit|gdb.ini|g |
|
# Edit Makefiles. This should go near the beginning of |
# the substitutions script, before the branch command that |
# skips any lines without @...@ in them. |
# Any commands that can match again after substitution must |
# do a conditional branch to next cycle (;t), or else Sed might hang. |
/(echo[ ]*':t/a\ |
s,\\([yp*]\\)\\.tab,\\1_tab,g\ |
s,\\$@\\.tmp,\\$@_tmp,g\ |
s,\\$@\\.new,\\$@_new,g\ |
/^ @rm -f/s,\\$@-\\[0-9\\]\\[0-9\\],& *.i[1-9] *.i[1-9][0-9],;t\ |
s,standards\\.info\\*,standard*.inf*,\ |
s,configure\\.info\\*,configur*.inf*,\ |
s,\\.info\\*,.inf* *.i[1-9] *.i[1-9][0-9],\ |
s,\\.gdbinit,gdb.ini,g\ |
s,@PATH_SEPARATOR@,";",\ |
/TEXINPUTS=/s,:,";",g\ |
/VPATH *=/s,\\([^A-z]\\):,\\1;,g\ |
/\\$\\$file-\\[0-9\\]/s,echo,& *.i[1-9] *.i[1-9][0-9],;t\ |
/\\$\\$file-\\[0-9\\]/s,rm -f \\$\\$file,& \\${PACKAGE}.i[1-9] \\${PACKAGE}.i[1-9][0-9],;t\ |
s,config\\.h\\.in,config.h-in,g;t t\ |
s,po2tbl\\.sed\\.in,po2tblsed.in,g;t t |
|
# Prevent splitting of config.status substitutions, because that |
# might break multi-line sed commands. |
/ac_max_sed_lines=[0-9]/s,=.*$,=`sed -n "$=" $tmp/subs.sed`, |
|
/^ac_given_srcdir=/,/^CEOF/ { |
/^s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%/a\ |
/@test ! -f /s,\\(.\\)\$, export am_cv_exeext=.exe; export lt_cv_sys_max_cmd_len=12288; \\1,\ |
/@test -f stage_last /s,\\(.\\)\$, export am_cv_exeext=.exe; export lt_cv_sys_max_cmd_len=12288; \\1, |
|
} |
|
/^CONFIG_FILES=/,/^EOF/ { |
s|po/Makefile.in\([^-:a-z]\)|po/Makefile.in:po/Makefile.in-in\1| |
} |
|
/^ *# *Handling of arguments/,/^done/ { |
s| config.h"| config.h:config.h-in"| |
s|config.h\([^-:"a-z]\)|config.h:config.h-in\1| |
} |
|
/^[ ]*\/\*)/s,/\*,/*|[A-z]:/*, |
/\$]\*) INSTALL=/s,\[/\$\]\*,&|[A-z]:/*, |
/\$]\*) ac_rel_source=/s,\[/\$\]\*,&|[A-z]:/*, |
/ac_file_inputs=/s,\( -e "s%\^%\$ac_given_srcdir/%"\)\( -e "s%:% $ac_given_srcdir/%g"\),\2\1, |
/^[ ]*if test "x`echo /s,sed 's@/,sed -e 's@^[A-z]:@@' -e 's@/, |
/^ *ac_config_headers=/s, config.h", config.h:config.h-in", |
/djcheck.sh
0,0 → 1,33
#!/bin/sh |
|
# A shell script to run the test suite on the DJGPP version of GDB. |
|
ORIGDIR=`pwd` |
GDB=${ORIGDIR}/../gdb.exe |
SUBDIRS=`find $ORIGDIR -type d ! -ipath $ORIGDIR` |
|
for d in $SUBDIRS |
do |
cd $d |
echo "Running tests in $d..." |
for f in *.out |
do |
test -f $f || break |
base=`basename $f .out` |
if test "${base}" = "dbx" ; then |
options=-dbx |
else |
options= |
fi |
$GDB ${options} < ${base}.in 2>&1 \ |
| sed -e '/GNU gdb /s/ [.0-9][.0-9]*//' \ |
-e '/^Copyright/s/[12][0-9][0-9][0-9]/XYZZY/g' \ |
-e '/Starting program: /s|[A-z]:/.*/||' \ |
-e '/main (/s/=0x[0-9a-f][0-9a-f]*/=XYZ/g' \ |
> ${base}.tst |
if diff --binary -u ${base}.out ${base}.tst ; then |
rm -f ${base}.tst |
fi |
done |
done |
|
djcheck.sh
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: fnchange.lst
===================================================================
--- fnchange.lst (nonexistent)
+++ fnchange.lst (revision 33)
@@ -0,0 +1,455 @@
+@V@/COPYING.LIBGLOSS @V@/COPYING.GLOSS
+@V@/bfd/ChangeLog-9193 @V@/bfd/ChangeLog.9193
+@V@/bfd/ChangeLog-9495 @V@/bfd/ChangeLog.9495
+@V@/bfd/ChangeLog-9697 @V@/bfd/ChangeLog.9697
+@V@/bfd/ChangeLog-9899 @V@/bfd/ChangeLog.9899
+@V@/bfd/ChangeLog-0001 @V@/bfd/ChangeLog.0001
+@V@/bfd/ChangeLog-0203 @V@/bfd/ChangeLog.0203
+@V@/bfd/ChangeLog-2004 @V@/bfd/ChangeLog.004
+@V@/bfd/ChangeLog-2005 @V@/bfd/ChangeLog.005
+@V@/bfd/ChangeLog-2006 @V@/bfd/ChangeLog.006
+@V@/bfd/doc/ChangeLog-9103 @V@/bfd/ChangeLog.9103
+@V@/bfd/coff-tic30.c @V@/bfd/cofftic30.c
+@V@/bfd/coff-tic4x.c @V@/bfd/cofftic40.c
+@V@/bfd/coff-tic54x.c @V@/bfd/cofftic54x.c
+@V@/bfd/coff-tic80.c @V@/bfd/cofftic80.c
+@V@/bfd/cpu-ia64-opc.c @V@/bfd/cpuia64-opc.c
+@V@/bfd/cpu-m68hc11.c @V@/bfd/cm68hc11.c
+@V@/bfd/cpu-m68hc12.c @V@/bfd/cm68hc12.c
+@V@/bfd/efi-app-ia32.c @V@/bfd/efi-ia32-app.c
+@V@/bfd/efi-app-ia64.c @V@/bfd/efi-ia64-app.c
+@V@/bfd/elf32-arc.c @V@/bfd/elf32arc.c
+@V@/bfd/elf32-crx.c @V@/bfd/elf32crx.c
+@V@/bfd/elf32-cris.c @V@/bfd/elf32cris.c
+@V@/bfd/elf32-cr16c.c @V@/bfd/elf32cr16c.c
+@V@/bfd/elf32-fr30.c @V@/bfd/elf32f30.c
+@V@/bfd/elf32-frv.c @V@/bfd/elf32fv.c
+@V@/bfd/elf32-i370.c @V@/bfd/e32i370.c
+@V@/bfd/elf32-i386.c @V@/bfd/e32i86.c
+@V@/bfd/elf32-m32c.c @V@/bfd/em32c.c
+@V@/bfd/elf32-m32r.c @V@/bfd/em32r.c
+@V@/bfd/elf32-m68hc11.c @V@/bfd/em68hc11.c
+@V@/bfd/elf32-m68hc12.c @V@/bfd/em68hc12.c
+@V@/bfd/elf32-m68hc1x.c @V@/bfd/em68hc1x.c
+@V@/bfd/elf32-m68k.c @V@/bfd/em68k.c
+@V@/bfd/elf32-ppc.c @V@/bfd/e32ppc.c
+@V@/bfd/elf32-sh.c @V@/bfd/e32sh.c
+@V@/bfd/elf32-sh64.c @V@/bfd/e32sh64.c
+@V@/bfd/elf32-sh-symbian.c @V@/bfd/e32sh-symbian.c
+@V@/bfd/elf32-sh64-com.c @V@/bfd/e32sh64-com.c
+@V@/bfd/elf64-alpha.c @V@/bfd/e64alphf.c
+@V@/bfd/elf64-sh64.c @V@/bfd/e64sh64.c
+@V@/config/inttypes-pri.m4 @V@/config/pri-inttypes.m4
+@V@/config/inttypes_h.m4 @V@/config/uintmax-inttypes.m4
+@V@/dejagnu/baseboards/mn10200-cygmon.exp @V@/dejagnu/baseboards/mn10200cygmon.exp
+@V@/dejagnu/baseboards/mn10200-sim.exp @V@/dejagnu/baseboards/mn10200sim.exp
+@V@/dejagnu/baseboards/mn10300-cygmon.exp @V@/dejagnu/baseboards/mn10300cygmon.exp
+@V@/dejagnu/baseboards/mn10300-sim.exp @V@/dejagnu/baseboards/mn10300sim.exp
+@V@/dejagnu/baseboards/powerpc-bug1.exp @V@/dejagnu/baseboards/powerpc1-bug.exp
+@V@/dejagnu/baseboards/powerpc-sim.exp @V@/dejagnu/baseboards/powerpcsim.exp
+@V@/dejagnu/baseboards/sparclite-coff.exp @V@/dejagnu/baseboards/sl-coff.exp
+@V@/dejagnu/baseboards/sparclite-cygmon.exp @V@/dejagnu/baseboards/sl-cygmon.exp
+@V@/dejagnu/baseboards/sparclite-sim-le.exp @V@/dejagnu/baseboards/sl-sim-le.exp
+@V@/dejagnu/baseboards/sparclite-sim.exp @V@/dejagnu/baseboards/sl-sim.exp
+@V@/dejagnu/contrib/test-g++ @V@/dejagnu/contrib/test-gxx
+@V@/dejagnu/example/calc/calc.h.in @V@/dejagnu/example/calc/calc.h-in
+@V@/expect/Dbg_cf.h.in @V@/expect/Dbg_cf.h-in
+@V@/expect/example/beer.exp.out @V@/expect/example/beer_exp.out
+@V@/expect/example/chesslib++.c @V@/expect/example/chesslibxx.c
+@V@/expect/example/chesslib.c @V@/expect/example/chesslb.c
+@V@/expect/example/chesslib2.c @V@/expect/example/chesslb2.c
+@V@/expect/example/chesslibxx.c @V@/expect/example/chesslbxx.c
+@V@/expect/exp_main_sub.c @V@/expect/exp_m_sub.c
+@V@/expect/exp_main_tk.c @V@/expect/exp_m_tk.c
+@V@/expect/expect_cf.h.in @V@/expect/expect_cf.h-in
+@V@/gdb/ChangeLog-1990 @V@/gdb/ChangeLog.90
+@V@/gdb/ChangeLog-1991 @V@/gdb/ChangeLog.91
+@V@/gdb/ChangeLog-1992 @V@/gdb/ChangeLog.92
+@V@/gdb/ChangeLog-1993 @V@/gdb/ChangeLog.93
+@V@/gdb/ChangeLog-1994 @V@/gdb/ChangeLog.94
+@V@/gdb/ChangeLog-1995 @V@/gdb/ChangeLog.95
+@V@/gdb/ChangeLog-1996 @V@/gdb/ChangeLog.96
+@V@/gdb/ChangeLog-1997 @V@/gdb/ChangeLog.97
+@V@/gdb/ChangeLog-1998 @V@/gdb/ChangeLog.98
+@V@/gdb/ChangeLog-1999 @V@/gdb/ChangeLog.99
+@V@/gdb/ChangeLog-2000 @V@/gdb/ChangeLog.000
+@V@/gdb/ChangeLog-2001 @V@/gdb/ChangeLog.001
+@V@/gdb/ChangeLog-2002 @V@/gdb/ChangeLog.002
+@V@/gdb/ChangeLog-2003 @V@/gdb/ChangeLog.003
+@V@/gdb/ChangeLog-2004 @V@/gdb/ChangeLog.004
+@V@/gdb/ChangeLog-2005 @V@/gdb/ChangeLog.005
+@V@/gdb/ChangeLog-2006 @V@/gdb/ChangeLog.006
+@V@/gdb/ChangeLog-2007 @V@/gdb/ChangeLog.007
+@V@/gdb/ChangeLog-3.x @V@/gdb/ChangeLog.3-x
+@V@/gdb/ada-exp.tab.c @V@/gdb/ada-exp_tab.c
+@V@/gdb/amd64fbsd-nat.c @V@/gdb/a64fb-nat.c
+@V@/gdb/amd64fbsd-tdep.c @V@/gdb/a64fb-tdep.c
+@V@/gdb/amd64nbsd-nat.c @V@/gdb/a64nb-nat.c
+@V@/gdb/amd64nbsd-tdep.c @V@/gdb/a64nb-tdep.c
+@V@/gdb/amd64obsd-nat.c @V@/gdb/a64ob-nat.c
+@V@/gdb/amd64obsd-tdep.c @V@/gdb/a64ob-tdep.c
+@V@/gdb/alphabsd-nat.c @V@/gdb/alphb-nat.c
+@V@/gdb/alphabsd-tdep.c @V@/gdb/alphb-tdep.c
+@V@/gdb/alphanbsd-tdep.c @V@/gdb/alphnb-tdep.c
+@V@/gdb/alpha-linux-nat.c @V@/gdb/alphl-nat.c
+@V@/gdb/alpha-linux-tdep.c @V@/gdb/alphl-tdep.c
+@V@/gdb/arm-linux-nat.c @V@/gdb/armlin-nat.c
+@V@/gdb/arm-linux-tdep.c @V@/gdb/armlin-tdep.c
+@V@/gdb/armnbsd-nat.c @V@/gdb/armnbd-nat.c
+@V@/gdb/armnbsd-tdep.c @V@/gdb/armnbd-tdep.c
+@V@/gdb/c-exp.tab.c @V@/gdb/c-exp_tab.c
+@V@/gdb/config/alpha/alpha-osf1.mh @V@/gdb/config/alpha/alphosf1.mh
+@V@/gdb/config/alpha/alpha-osf2.mh @V@/gdb/config/alpha/alphosf2.mh
+@V@/gdb/config/alpha/alpha-osf3.mh @V@/gdb/config/alpha/alphosf3.mh
+@V@/gdb/config/alpha/tm-alphalinux.h @V@/gdb/config/alpha/tm-alplinux.h
+@V@/gdb/config/i386/nm-linux64.h @V@/gdb/config/i386/nm-lx64.h
+@V@/gdb/config/i386/nm-i386sco4.h @V@/gdb/config/i386/nm-sco4.h
+@V@/gdb/config/i386/nm-i386sco5.h @V@/gdb/config/i386/nm-sco5.h
+@V@/gdb/config/i386/nm-i386sol2.h @V@/gdb/config/i386/nm-sol2.h
+@V@/gdb/config/i386/nm-i386v4.h @V@/gdb/config/i386/nm-v4.h
+@V@/gdb/config/i386/nm-i386v42mp.h @V@/gdb/config/i386/nm-v42mp.h
+@V@/gdb/config/i386/tm-i386sol2.h @V@/gdb/config/i386/tm-sol2.h
+@V@/gdb/config/i386/xm-i386v4.h @V@/gdb/config/i386/xm-v4.h
+@V@/gdb/config/m88k/xm-delta88v4.h @V@/gdb/config/m88k/xm-d88v4.h
+@V@/gdb/config/mips/tm-linux.h @V@/gdb/config/mips/tm-lx.h
+@V@/gdb/config/pa/nm-hppah11.h @V@/gdb/config/pa/nm-hppa11.h
+@V@/gdb/config/rs6000/tm-rs6000.h @V@/gdb/config/rs6000/tm-rs6k.h
+@V@/gdb/config/rs6000/tm-rs6000ly.h @V@/gdb/config/rs6000/tm-rs6kly.h
+@V@/gdb/config/sparc/tm-sparclynx.h @V@/gdb/config/sparc/tm-splynx.h
+@V@/gdb/cp-names.c @V@/gdb/cpnames.c
+@V@/gdb/f-exp.tab.c @V@/gdb/f-exp_tab.c
+@V@/gdb/gdbserver/linux-cris-low.c @V@/gdb/gdbserver/lx-cris.c
+@V@/gdb/gdbserver/linux-crisv32-low.c @V@/gdb/gdbserver/lx-cris32.c
+@V@/gdb/gdbserver/linux-ppc-low.c @V@/gdb/gdbserver/lx-ppc-low.c
+@V@/gdb/gdbserver/linux-ppc64-low.c @V@/gdb/gdbserver/lx-ppc64-low.c
+@V@/gdb/gdbtk/ChangeLog-2001 @V@/gdb/gdbtk/ChangeLog.001
+@V@/gdb/gdbtk/ChangeLog-2002 @V@/gdb/gdbtk/ChangeLog.002
+@V@/gdb/gdbtk/ChangeLog-2003 @V@/gdb/gdbtk/ChangeLog.003
+@V@/gdb/gdbtk/generic/ChangeLog-1997 @V@/gdb/gdbtk/generic/ChangeLog.97
+@V@/gdb/gdbtk/generic/ChangeLog-1998 @V@/gdb/gdbtk/generic/ChangeLog.98
+@V@/gdb/gdbtk/generic/ChangeLog-1999 @V@/gdb/gdbtk/generic/ChangeLog.99
+@V@/gdb/gdbtk/generic/ChangeLog-2000 @V@/gdb/gdbtk/generic/ChangeLog.000
+@V@/gdb/gdbtk/generic/gdbtk-varobj.c @V@/gdb/gdbtk/generic/gdbtk-vobj.c
+@V@/gdb/gdbtk/library/ChangeLog-1997 @V@/gdb/gdbtk/library/ChangeLog.97
+@V@/gdb/gdbtk/library/ChangeLog-1998 @V@/gdb/gdbtk/library/ChangeLog.98
+@V@/gdb/gdbtk/library/ChangeLog-1999 @V@/gdb/gdbtk/library/ChangeLog.99
+@V@/gdb/gdbtk/library/ChangeLog-2000 @V@/gdb/gdbtk/library/ChangeLog.000
+@V@/gdb/gdbtk/plugins/intel-pentium/intel-pentium.tcl.in @V@/gdb/gdbtk/plugins/intel-pentium/intel-pentium.t-in
+@V@/gdb/gdbtk/plugins/rhabout/rhabout.tcl.in @V@/gdb/gdbtk/plugins/rhabout/rhabout.t-in
+@V@/gdb/hppabsd-nat.c @V@/gdb/hppab-nat.c
+@V@/gdb/hppabsd-tdep.c @V@/gdb/hppab-tdep.c
+@V@/gdb/i386-interix-nat.c @V@/gdb/i386ix-nat.c
+@V@/gdb/i386-interix-tdep.c @V@/gdb/i386ix-tdep.c
+@V@/gdb/i386-linux-tdep.c @V@/gdb/i386lx-tdep.c
+@V@/gdb/i386-linux-nat.c @V@/gdb/i386lx-nat.c
+@V@/gdb/i386bsd-nat.c @V@/gdb/i3bsd-nat.c
+@V@/gdb/i386bsd-tdep.c @V@/gdb/i3bsd-tdep.c
+@V@/gdb/i386fbsd-nat.c @V@/gdb/i3fbsd-nat.c
+@V@/gdb/i386fbsd-tdep.c @V@/gdb/i3fbsd-tdep.c
+@V@/gdb/i386gnu-nat.c @V@/gdb/i3gnu-nat.c
+@V@/gdb/i386gnu-tdep.c @V@/gdb/i3gnu-tdep.c
+@V@/gdb/i386nbsd-tdep.c @V@/gdb/i3nbsd-tdep.c
+@V@/gdb/i386obsd-nat.c @V@/gdb/i3obsd-nat.c
+@V@/gdb/i386obsd-tdep.c @V@/gdb/i3obsd-tdep.c
+@V@/gdb/i386-sol2-nat.c @V@/gdb/i3sol2-nat.c
+@V@/gdb/i386-sol2-tdep.c @V@/gdb/i3sol2-tdep.c
+@V@/gdb/ia64-aix-nat.c @V@/gdb/ia64ax-nat.c
+@V@/gdb/ia64-aix-tdep.c @V@/gdb/ia64ax-tdep.c
+@V@/gdb/ia64-linux-nat.c @V@/gdb/ia64lx-nat.c
+@V@/gdb/ia64-linux-nat.c @V@/gdb/ia64lx-tdep.c
+@V@/gdb/jv-exp.tab.c @V@/gdb/jv-exp_tab.c
+@V@/gdb/m2-exp.tab.c @V@/gdb/m2-exp_tab.c
+@V@/gdb/m32r-linux-nat.c @V@/gdb/m32rlnxnat.c
+@V@/gdb/m32r-linux-tdep.c @V@/gdb/m32rlnxtdep.c
+@V@/gdb/m68klinux-nat.c @V@/gdb/m68kl-nat.c
+@V@/gdb/m68klinux-tdep.c @V@/gdb/m68kl-tdep.c
+@V@/gdb/m68kbsd-nat.c @V@/gdb/m68bsd-nat.c
+@V@/gdb/m68kbsd-tdep.c @V@/gdb/m68bsd-tdep.c
+@V@/gdb/m68knbsd-nat.c @V@/gdb/m6nbsd-nat.c
+@V@/gdb/m68knbsd-tdep.c @V@/gdb/m6nbsd-tdep.c
+@V@/gdb/mips-linux-nat.c @V@/gdb/mipslnxnat.c
+@V@/gdb/mips-linux-tdep.c @V@/gdb/mipslnxtdep.c
+@V@/gdb/mipsnbsd-nat.c @V@/gdb/mipsnbnat.c
+@V@/gdb/mipsnbsd-tdep.c @V@/gdb/mipsnbtdep.c
+@V@/gdb/mips64obsd-nat.c @V@/gdb/mipsobnat.c
+@V@/gdb/mips64obsd-tdep.c @V@/gdb/mipsobtdep.c
+@V@/gdb/mn10300-linux-tdep.c @V@/gdb/mn10300linux-tdep.c
+@V@/gdb/ns32knbsd-nat.c @V@/gdb/ns32nb-nat.c
+@V@/gdb/ns32knbsd-tdep.c @V@/gdb/ns32nb-tdep.c
+@V@/gdb/objc-exp.tab.c @V@/gdb/objc-exp_tab.c
+@V@/gdb/osf-share/cma_stack_int.h @V@/gdb/osf-share/cma_stkint.h
+@V@/gdb/p-exp.tab.c @V@/gdb/p-exp_tab.c
+@V@/gdb/ppc-linux-tdep.c @V@/gdb/ppc-lx-tdep.c
+@V@/gdb/ppc-linux-nat.c @V@/gdb/ppc-lx-nat.c
+@V@/gdb/ppcnbsd-nat.c @V@/gdb/ppcnb-nat.c
+@V@/gdb/ppcnbsd-tdep.c @V@/gdb/ppcnb-tdep.c
+@V@/gdb/ppcobsd-nat.c @V@/gdb/ppcob-nat.c
+@V@/gdb/ppcobsd-tdep.c @V@/gdb/ppcob-tdep.c
+@V@/gdb/regformats/reg-i386-linux.dat @V@/gdb/regformats/r-i386-lnx.dat
+@V@/gdb/regformats/reg-s390x.dat @V@/gdb/regformats/r-s390x.dat
+@V@/gdb/regformats/reg-cris.dat @V@/gdb/regformats/r-cris.dat
+@V@/gdb/regformats/reg-crisv32.dat @V@/gdb/regformats/r-crisv32.dat
+@V@/gdb/remote-e7000.c @V@/gdb/rmt-e7000.c
+@V@/gdb/remote-est.c @V@/gdb/rmt-est.c
+@V@/gdb/remote-mips.c @V@/gdb/emt-mips.c
+@V@/gdb/remote-rdi.c @V@/gdb/rmt-rdi.c
+@V@/gdb/remote-rdp.c @V@/gdb/rmt-rdp.c
+@V@/gdb/remote-sds.c @V@/gdb/rmt-sds.c
+@V@/gdb/remote-sim.c @V@/gdb/rmt-sim.c
+@V@/gdb/remote-st.c @V@/gdb/rmt-st.c
+@V@/gdb/remote-vx.c @V@/gdb/rmt-vx.c
+@V@/gdb/remote-vx68.c @V@/gdb/rmt-vx68.c
+@V@/gdb/remote-vxmips.c @V@/gdb/rmt-vxmips.c
+@V@/gdb/remote-vxsparc.c @V@/gdb/rmt-vxsparc.c
+@V@/gdb/sparc64fbsd-nat.c @V@/gdb/sp64fb-nat.c
+@V@/gdb/sparc64fbsd-tdep.c @V@/gdb/sp64fb-tdep.c
+@V@/gdb/sparc64nbsd-nat.c @V@/gdb/sp64nb-nat.c
+@V@/gdb/sparc64nbsd-tdep.c @V@/gdb/sp64nb-tdep.c
+@V@/gdb/sparc64-linux-nat.c @V@/gdb/sp64lx-nat.c
+@V@/gdb/sparc64-linux-tdep.c @V@/gdb/sp64lx-tdep.c
+@V@/gdb/sparc64-nat.c @V@/gdb/sp64-nat.c
+@V@/gdb/sparc64-tdep.c @V@/gdb/sp64-tdep.c
+@V@/gdb/sparc64-sol2-tdep.c @V@/gdb/sp64s2-tdep.c
+@V@/gdb/sparcnbsd-nat.c @V@/gdb/spnb-nat.c
+@V@/gdb/sparcnbsd-tdep.c @V@/gdb/spnb-tdep.c
+@V@/gdb/sparc-linux-nat.c @V@/gdb/splx-nat.c
+@V@/gdb/sparc-linux-tdep.c @V@/gdb/splx-tdep.c
+@V@/gdb/sparc-sol2-nat.c @V@/gdb/spsol2-nat.c
+@V@/gdb/sparc-sol2-tdep.c @V@/gdb/spsol2-tdep.c
+@V@/gdb/testsuite/.gdbinit @V@/gdb/testsuite/gdb.ini
+@V@/gdb/testsuite/gdb.arch/altivec-abi.c @V@/gdb/testsuite/gdb.arch/av-abi.c
+@V@/gdb/testsuite/gdb.arch/altivec-abi.exp @V@/gdb/testsuite/gdb.arch/av-abi.exp
+@V@/gdb/testsuite/gdb.arch/altivec-regs.c @V@/gdb/testsuite/gdb.arch/av-regs.c
+@V@/gdb/testsuite/gdb.arch/altivec-regs.exp @V@/gdb/testsuite/gdb.arch/av-regs.exp
+@V@/gdb/testsuite/gdb.arch/powerpc-aix-prologue.exp @V@/gdb/testsuite/gdb.arch/ppcaprol.exp
+@V@/gdb/testsuite/gdb.arch/powerpc-aix-prologue.c @V@/gdb/testsuite/gdb.arch/ppcaprol.c
+@V@/gdb/testsuite/gdb.base/bitfields2.c @V@/gdb/testsuite/gdb.base/bitfiel2.c
+@V@/gdb/testsuite/gdb.base/bitfields2.exp @V@/gdb/testsuite/gdb.base/bitfiel2.exp
+@V@/gdb/testsuite/gdb.base/coremaker2.c @V@/gdb/testsuite/gdb.base/core2maker.c
+@V@/gdb/testsuite/gdb.cp/m-static1.cc @V@/gdb/testsuite/gdb.cp/m-stat1.cc
+@V@/gdb/testsuite/gdb.cp/namespace1.cc @V@/gdb/testsuite/gdb.cp/namesp1.cc
+@V@/gdb/testsuite/gdb.dwarf2/dw2-intermix.exp @V@/gdb/testsuite/gdb.dwarf2/dw2-intmix.exp
+@V@/gdb/testsuite/gdb.dwarf2/dw2-intermix.S @V@/gdb/testsuite/gdb.dwarf2/dw2-intmix.S
+@V@/gdb/testsuite/gdb.gdbtk/ChangeLog @V@/gdb/testsuite/gdb.tk/ChangeLog
+@V@/gdb/testsuite/gdb.gdbtk/Makefile.in @V@/gdb/testsuite/gdb.tk/Makefile.in
+@V@/gdb/testsuite/gdb.gdbtk/browser.exp @V@/gdb/testsuite/gdb.tk/browser.exp
+@V@/gdb/testsuite/gdb.gdbtk/browser.test @V@/gdb/testsuite/gdb.tk/browser.test
+@V@/gdb/testsuite/gdb.gdbtk/c_variable.c @V@/gdb/testsuite/gdb.tk/c_variable.c
+@V@/gdb/testsuite/gdb.gdbtk/c_variable.exp @V@/gdb/testsuite/gdb.tk/c_variable.exp
+@V@/gdb/testsuite/gdb.gdbtk/c_variable.test @V@/gdb/testsuite/gdb.tk/c_variable.test
+@V@/gdb/testsuite/gdb.gdbtk/configure @V@/gdb/testsuite/gdb.tk/configure
+@V@/gdb/testsuite/gdb.gdbtk/configure.in @V@/gdb/testsuite/gdb.tk/configure.in
+@V@/gdb/testsuite/gdb.gdbtk/console.exp @V@/gdb/testsuite/gdb.tk/console.exp
+@V@/gdb/testsuite/gdb.gdbtk/console.test @V@/gdb/testsuite/gdb.tk/console.test
+@V@/gdb/testsuite/gdb.gdbtk/cpp_variable.cc @V@/gdb/testsuite/gdb.tk/cpp_variable.cc
+@V@/gdb/testsuite/gdb.gdbtk/cpp_variable.exp @V@/gdb/testsuite/gdb.tk/cpp_variable.exp
+@V@/gdb/testsuite/gdb.gdbtk/cpp_variable.h @V@/gdb/testsuite/gdb.tk/cpp_variable.h
+@V@/gdb/testsuite/gdb.gdbtk/cpp_variable.test @V@/gdb/testsuite/gdb.tk/cpp_variable.test
+@V@/gdb/testsuite/gdb.gdbtk/defs @V@/gdb/testsuite/gdb.tk/defs
+@V@/gdb/testsuite/gdb.gdbtk/list0.c @V@/gdb/testsuite/gdb.tk/list0.c
+@V@/gdb/testsuite/gdb.gdbtk/list0.h @V@/gdb/testsuite/gdb.tk/list0.h
+@V@/gdb/testsuite/gdb.gdbtk/list1.c @V@/gdb/testsuite/gdb.tk/list1.c
+@V@/gdb/testsuite/gdb.gdbtk/README @V@/gdb/testsuite/gdb.tk/README
+@V@/gdb/testsuite/gdb.gdbtk/simple.c @V@/gdb/testsuite/gdb.tk/simple.c
+@V@/gdb/testsuite/gdb.gdbtk/srcwin.exp @V@/gdb/testsuite/gdb.tk/srcwin.exp
+@V@/gdb/testsuite/gdb.gdbtk/srcwin.test @V@/gdb/testsuite/gdb.tk/srcwin.test
+@V@/gdb/testsuite/gdb.gdbtk/srcwin2.test @V@/gdb/testsuite/gdb.tk/srcwin2.test
+@V@/gdb/testsuite/gdb.gdbtk/srcwin3.test @V@/gdb/testsuite/gdb.tk/srcwin3.test
+@V@/gdb/testsuite/gdb.gdbtk/stack1.c @V@/gdb/testsuite/gdb.tk/stack1.c
+@V@/gdb/testsuite/gdb.gdbtk/stack2.c @V@/gdb/testsuite/gdb.tk/stack2.c
+@V@/gdb/testsuite/gdb.gdbtk/windows.exp @V@/gdb/testsuite/gdb.tk/windows.exp
+@V@/gdb/testsuite/gdb.gdbtk/windows.test @V@/gdb/testsuite/gdb.tk/windows.test
+@V@/gdb/testsuite/gdb.mi/mi-var-cmd.exp @V@/gdb/testsuite/gdb.mi/mi-varcmd.exp
+@V@/gdb/testsuite/gdb.mi/mi-var-child.exp @V@/gdb/testsuite/gdb.mi/mi-varchild.exp
+@V@/gdb/testsuite/gdb.mi/mi1-var-block.exp @V@/gdb/testsuite/gdb.mi/mi1varblock.exp
+@V@/gdb/testsuite/gdb.mi/mi1-var-child.exp @V@/gdb/testsuite/gdb.mi/mi1varchild.exp
+@V@/gdb/testsuite/gdb.mi/mi1-var-cmd.exp @V@/gdb/testsuite/gdb.mi/mi1varcmd.exp
+@V@/gdb/testsuite/gdb.mi/mi1-var-display.exp @V@/gdb/testsuite/gdb.mi/mi1vardisplay.exp
+@V@/gdb/testsuite/gdb.mi/mi2-var-block.exp @V@/gdb/testsuite/gdb.mi/mi2varblock.exp
+@V@/gdb/testsuite/gdb.mi/mi2-var-child.exp @V@/gdb/testsuite/gdb.mi/mi2varchild.exp
+@V@/gdb/testsuite/gdb.mi/mi2-var-cmd.exp @V@/gdb/testsuite/gdb.mi/mi2varcmd.exp
+@V@/gdb/testsuite/gdb.mi/mi2-var-display.exp @V@/gdb/testsuite/gdb.mi/mi2vardisplay.exp
+@V@/gdb/amd64-linux-tdep.c @V@/gdb/amd64-ltdep.c
+@V@/gdb/amd64-linux-nat.c @V@/gdb/amd64-lnat.c
+@V@/gdb/hppa-linux-tdep.c @V@/gdb/palnxtdep.c
+@V@/gdb/hppa-linux-nat.c @V@/gdb/palnxnat.c
+@V@/gdb/hppa-hpux-nat.c @V@/gdb/pahpuxnat.c
+@V@/gdb/hppa-hpux-tdep.c @V@/gdb/pahpuxtdep.c
+@V@/include/ChangeLog-9103 @V@/include/ChangeLog.9103
+@V@/include/coff/ChangeLog-9103 @V@/include/coff/ChangeLog.9103
+@V@/include/elf/ChangeLog-9103 @V@/include/elf/ChangeLog.9103
+@V@/include/opcode/ChangeLog-9103 @V@/include/opcode/ChangeLog.9103
+@V@/include/xtensa-isa-internal.h @V@/include/xt-internal.h
+@V@/include/xtensa-isa.h @V@/include/xt-isa.h
+@V@/intl/intlh.inst.in @V@/intl/intlh_inst.in
+@V@/intl/po2tbl.sed.in @V@/intl/po2tblsed.in
+@V@/itcl/itcl/itclConfig.sh.in @V@/itcl/itcl/itclConfig.sh-in
+@V@/itcl/itcl/unix/pkgIndex.tcl.in @V@/itcl/itcl/unix/pkgIndex.t-in
+@V@/itcl/itk/itkConfig.sh.in @V@/itcl/itk/itkConfig.sh-in
+@V@/itcl/itk/unix/pkgIndex.tcl.in @V@/itcl/itk/unix/pkgIndex.t-in
+@V@/itcl/iwidgets3.0.0 @V@/itcl/iwidgets3.0-0
+@V@/libgui/config.h.in @V@/libgui/config.h-in
+@V@/libgui/src/tkTableCell.c @V@/libgui/src/tkTabCell.c
+@V@/libgui/src/tkTableCmd.c @V@/libgui/src/tkTabCmd.c
+@V@/libgui/src/tkWinPrintCanvas.c @V@/libgui/src/tkWPrtCanvas.c
+@V@/libgui/src/tkWinPrintText.c @V@/libgui/src/tkWPrtText.c
+@V@/opcodes/ChangeLog-9297 @V@/opcodes/ChangeLog.9297
+@V@/opcodes/ChangeLog-9899 @V@/opcodes/ChangeLog.9899
+@V@/opcodes/ChangeLog-0001 @V@/opcodes/ChangeLog.0001
+@V@/opcodes/ChangeLog-0203 @V@/opcodes/ChangeLog.0203
+@V@/opcodes/ChangeLog-2004 @V@/opcodes/ChangeLog.004
+@V@/opcodes/ChangeLog-2005 @V@/opcodes/ChangeLog.005
+@V@/opcodes/ia64-opc-a.c @V@/opcodes/ia64opca.c
+@V@/opcodes/ia64-opc-b.c @V@/opcodes/ia64opcb.c
+@V@/opcodes/ia64-opc-d.c @V@/opcodes/ia64opcd.c
+@V@/opcodes/ia64-opc-f.c @V@/opcodes/ia64opcf.c
+@V@/opcodes/ia64-opc-i.c @V@/opcodes/ia64opci.c
+@V@/opcodes/ia64-opc-m.c @V@/opcodes/ia64opcm.c
+@V@/opcodes/ia64-opc-x.c @V@/opcodes/ia64opcx.c
+@V@/opcodes/ia64-opc.c @V@/opcodes/ia64-opc.c
+@V@/opcodes/iq2000-desc.c @V@/opcodes/iq2000desc.c
+@V@/opcodes/iq2000-dis.c @V@/opcodes/iq2000dis.c
+@V@/opcodes/m68hc11-dis.c @V@/opcodes/m68hc11dis.c
+@V@/opcodes/m68hc11-opc.c @V@/opcodes/m68hc11opc.c
+@V@/opcodes/openrisc-asm.c @V@/opcodes/orisc-asm.c
+@V@/opcodes/openrisc-desc.c @V@/opcodes/orisc-desc.c
+@V@/opcodes/openrisc-dis.c @V@/opcodes/orisc-dis.c
+@V@/opcodes/openrisc-ibld.c @V@/opcodes/orisc-ibld.c
+@V@/opcodes/openrisc-opc.c @V@/opcodes/orisc-opc.c
+@V@/opcodes/openrisc-opc.h @V@/opcodes/orisc-opc.h
+@V@/opcodes/openrisc-desc.h @V@/opcodes/orisc-desc.h
+@V@/opcodes/xstormy16-asm.c @V@/opcodes/xst16asm.c
+@V@/opcodes/xstormy16-desc.c @V@/opcodes/xst16dsc.c
+@V@/opcodes/xstormy16-desc.h @V@/opcodes/xst16dsc.h
+@V@/opcodes/xstormy16-dis.c @V@/opcodes/xst16dis.c
+@V@/opcodes/xstormy16-ibld.c @V@/opcodes/xst16ibd.c
+@V@/opcodes/xstormy16-opc.c @V@/opcodes/xst16opc.c
+@V@/opcodes/xstormy16-opc.h @V@/opcodes/xst16opc.h
+@V@/readline/config.h.bot @V@/readline/config.h-bot
+@V@/readline/config.h.in @V@/readline/config.h-in
+@V@/sim/frv/profile-fr400.c @V@/sim/frv/fr400-profile.c
+@V@/sim/cris/semcrisv10f-switch.c @V@/sim/cris/scrisv10f.c
+@V@/sim/cris/semcrisv32f-switch.c @V@/sim/cris/scrisv32f.c
+@V@/sim/frv/profile-fr400.h @V@/sim/frv/fr400-profile.h
+@V@/sim/frv/profile-fr500.c @V@/sim/frv/fr500-profile.c
+@V@/sim/frv/profile-fr500.h @V@/sim/frv/fr500-profile.h
+@V@/sim/frv/profile-fr550.c @V@/sim/frv/fr550-profile.c
+@V@/sim/frv/profile-fr550.h @V@/sim/frv/fr550-profile.h
+@V@/sim/m68hc11/dv-m68hc11eepr.c @V@/sim/m68hc11/dv-eepr.c
+@V@/sim/m68hc11/dv-m68hc11sio.c @V@/sim/m68hc11/dv-sio.c
+@V@/sim/m68hc11/dv-m68hc11spi.c @V@/sim/m68hc11/dv-spi.c
+@V@/sim/m68hc11/dv-m68hc11tim.c @V@/sim/m68hc11/dv-tim.c
+@V@/sim/mips/dv-tx3904irc.c @V@/sim/mips/dv-tx3irc.c
+@V@/sim/mips/dv-tx3904sio.c @V@/sim/mips/dv-tx3sio.c
+@V@/sim/mips/dv-tx3904tmr.c @V@/sim/mips/dv-tx3tmr.c
+@V@/sim/mn10300/dv-mn103int.c @V@/sim/mn10300/dv-mn1int.c
+@V@/sim/mn10300/dv-mn103iop.c @V@/sim/mn10300/dv-mn1iop.c
+@V@/sim/mn10300/dv-mn103ser.c @V@/sim/mn10300/dv-mn1ser.c
+@V@/sim/mn10300/dv-mn103tim.c @V@/sim/mn10300/dv-mn1tim.c
+@V@/sim/ppc/.gdbinit @V@/sim/ppc/gdb.ini
+@V@/sim/ppc/corefile-n.h @V@/sim/ppc/corefle-n.h
+@V@/sim/ppc/altivec_expression.h @V@/sim/ppc/av_expression.h
+@V@/sim/ppc/altivec_registers.h @V@/sim/ppc/av_registers.h
+@V@/sim/ppc/idecode_branch.h @V@/sim/ppc/idec_branch.h
+@V@/sim/ppc/idecode_expression.h @V@/sim/ppc/idec_expression.h
+@V@/sim/ppc/idecode_fields.h @V@/sim/ppc/idec_fields.h
+@V@/sim/ppc/sim-endian-n.h @V@/sim/ppc/sim-endn.h
+@V@/sim/sh64/sem-compact-switch.c @V@/sim/sh64/sem-cswitch.c
+@V@/sim/sh64/sem-media-switch.c @V@/sim/sh64/sem-mswitch.c
+@V@/sim/testsuite/d10v-elf/t-ae-ld-d.s @V@/sim/testsuite/d10v-elf/t-ld-d.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld-i.s @V@/sim/testsuite/d10v-elf/t-ld-i.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld-id.s @V@/sim/testsuite/d10v-elf/t-ld-id.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld-im.s @V@/sim/testsuite/d10v-elf/t-ld-im.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld-ip.s @V@/sim/testsuite/d10v-elf/t-ld-ip.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld2w-d.s @V@/sim/testsuite/d10v-elf/t-ld2-d.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld2w-i.s @V@/sim/testsuite/d10v-elf/t-ld2-i.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld2w-id.s @V@/sim/testsuite/d10v-elf/t-ld2-id.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld2w-im.s @V@/sim/testsuite/d10v-elf/t-ld2-im.s
+@V@/sim/testsuite/d10v-elf/t-ae-ld2w-ip.s @V@/sim/testsuite/d10v-elf/t-ld2-ip.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-d.s @V@/sim/testsuite/d10v-elf/t-st-d.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-i.s @V@/sim/testsuite/d10v-elf/t-st-i.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-id.s @V@/sim/testsuite/d10v-elf/t-st-id.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-im.s @V@/sim/testsuite/d10v-elf/t-st-im.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-ip.s @V@/sim/testsuite/d10v-elf/t-st-ip.s
+@V@/sim/testsuite/d10v-elf/t-ae-st-is.s @V@/sim/testsuite/d10v-elf/t-st-is.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-d.s @V@/sim/testsuite/d10v-elf/t-st2-d.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-i.s @V@/sim/testsuite/d10v-elf/t-st2-i.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-id.s @V@/sim/testsuite/d10v-elf/t-st2-id.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-im.s @V@/sim/testsuite/d10v-elf/t-st2-im.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-ip.s @V@/sim/testsuite/d10v-elf/t-st2-ip.s
+@V@/sim/testsuite/d10v-elf/t-ae-st2w-is.s @V@/sim/testsuite/d10v-elf/t-st2-is.s
+@V@/sim/testsuite/d30v-elf/ls-ld4bhu.S @V@/sim/testsuite/d30v-elf/ls-ld4bu.S
+@V@/sim/testsuite/sim/arm/misaligned1.ms @V@/sim/testsuite/sim/arm/mis1.ms
+@V@/sim/testsuite/sim/arm/misaligned2.ms @V@/sim/testsuite/sim/arm/mis2.ms
+@V@/sim/testsuite/sim/arm/misaligned3.ms @V@/sim/testsuite/sim/arm/mis3.ms
+@V@/sim/testsuite/sim/cris/asm/tjmpsrv32-2.ms @V@/sim/testsuite/sim/cris/tjmp32-2.ms
+@V@/sim/testsuite/sim/cris/asm/tjmpsrv32.ms @V@/sim/testsuite/sim/cris/tjmp32.ms
+@V@/sim/testsuite/sim/cris/c/ftruncate1.c @V@/sim/testsuite/sim/cris/ftrunc1.c
+@V@/sim/testsuite/sim/cris/c/ftruncate2.c @V@/sim/testsuite/sim/cris/ftrunc2.c
+@V@/sim/testsuite/sim/cris/c/readlink1.c @V@/sim/testsuite/sim/cris/rdlink1.c
+@V@/sim/testsuite/sim/cris/c/readlink2.c @V@/sim/testsuite/sim/cris/rdlink2.c
+@V@/sim/testsuite/sim/cris/c/readlink3.c @V@/sim/testsuite/sim/cris/rdlink3.c
+@V@/sim/testsuite/sim/cris/c/readlink4.c @V@/sim/testsuite/sim/cris/rdlink4.c
+@V@/sim/testsuite/sim/cris/c/readlink5.c @V@/sim/testsuite/sim/cris/rdlink5.c
+@V@/sim/testsuite/sim/cris/c/readlink6.c @V@/sim/testsuite/sim/cris/rdlink6.c
+@V@/sim/testsuite/sim/cris/c/readlink7.c @V@/sim/testsuite/sim/cris/rdlink7.c
+@V@/sim/testsuite/sim/cris/c/readlink8.c @V@/sim/testsuite/sim/cris/rdlink8.c
+@V@/sim/testsuite/sim/cris/c/readlink9.c @V@/sim/testsuite/sim/cris/rdlink9.c
+@V@/sim/testsuite/sim/cris/c/readlink10.c @V@/sim/testsuite/sim/cris/rdlink10.c
+@V@/sim/testsuite/sim/cris/c/sigreturn1.c @V@/sim/testsuite/sim/cris/sigret1.c
+@V@/sim/testsuite/sim/cris/c/sigreturn2.c @V@/sim/testsuite/sim/cris/sigret2.c
+@V@/sim/testsuite/sim/cris/c/truncate1.c @V@/sim/testsuite/sim/cris/trunc1.c
+@V@/sim/testsuite/sim/cris/c/truncate2.c @V@/sim/testsuite/sim/cris/trunc2.c
+@V@/sim/testsuite/sim/mips/fpu64-ps-sb1.s @V@/sim/testsuite/sim/mips/fpu64ps-sb1.s
+@V@/sim/testsuite/sim/frv/interrupts/Ipipe-fr400.cgs @V@/sim/testsuite/sim/frv/interrupts/Ip-fr400.cgs
+@V@/sim/testsuite/sim/frv/interrupts/Ipipe-fr500.cgs @V@/sim/testsuite/sim/frv/interrupts/Ip-fr500.cgs
+@V@/sim/testsuite/sim/frv/interrupts/badalign-fr550.cgs @V@/sim/testsuite/sim/frv/interrupts/fr550-badalign.cgs
+@V@/sim/testsuite/sim/frv/interrupts/compound-fr550.cgs @V@/sim/testsuite/sim/frv/interrupts/fr550-compound.cgs
+@V@/sim/testsuite/sim/frv/interrupts/data_store_error-fr550.cgs @V@/sim/testsuite/sim/frv/interrupts/fr550-data_store_error.cgs
+@V@/sim/testsuite/sim/frv/interrupts/fp_exception-fr550.cgs @V@/sim/testsuite/sim/frv/interrupts/fr550-fp_exception.cgs
+@V@/sim/testsuite/sim/frv/interrupts/insn_access_error-fr550.cgs @V@/sim/testsuite/sim/frv/interrupts/fr550-insn_access_error.cgs
+@V@/sim/testsuite/sim/mips/hilo-hazard-1.s @V@/sim/testsuite/sim/mips/hilo-hz1.s
+@V@/sim/testsuite/sim/mips/hilo-hazard-2.s @V@/sim/testsuite/sim/mips/hilo-hz2.s
+@V@/sim/testsuite/sim/mips/hilo-hazard-3.s @V@/sim/testsuite/sim/mips/hilo-hz3.s
+@V@/sim/testsuite/sim/sh64/compact/ldsl-mach.cgs @V@/sim/testsuite/sim/sh64/compact/mach-ldsl.cgs
+@V@/sim/testsuite/sim/sh64/compact/ldsl-macl.cgs @V@/sim/testsuite/sim/sh64/compact/macl-ldsl.cgs
+@V@/sim/testsuite/sim/sh64/compact/stsl-mach.cgs @V@/sim/testsuite/sim/sh64/compact/mach-stsl.cgs
+@V@/sim/testsuite/sim/sh64/compact/stsl-macl.cgs @V@/sim/testsuite/sim/sh64/compact/macl-stsl.cgs
+@V@/tcl/cygwin/tclConfig.sh.in @V@/tcl/cygwin/tclConfig.sh-in
+@V@/tcl/doc/ExprLongObj.3 @V@/tcl/doc/ExprLObj.3
+@V@/tcl/mac/tclMacBOAAppInit.c @V@/tcl/mac/tclBOAAppInit.c
+@V@/tcl/mac/tclMacBOAMain.c @V@/tcl/mac/tclBOAMain.c
+@V@/tcl/mac/tclMacInit.c @V@/tcl/mac/tclInit.c
+@V@/tcl/mac/tclMacInterupt.c @V@/tcl/mac/tclInterupt.c
+@V@/tcl/mac/tclMacProjects.sea.hqx @V@/tcl/mac/tclMacProjects.shqx
+@V@/tcl/tests/namespace-old.test @V@/tcl/tests/namespace.otest
+@V@/tcl/unix/tclConfig.sh.in @V@/tcl/unix/tclConfig.sh-in
+@V@/tcl/unix/tclLoadAix.c @V@/tcl/unix/tclLdAix.c
+@V@/tcl/unix/tclLoadAout.c @V@/tcl/unix/tclLdAout.c
+@V@/tcl/unix/tclLoadDl.c @V@/tcl/unix/tclLdDl.c
+@V@/tcl/unix/tclLoadDld.c @V@/tcl/unix/tclLdDld.c
+@V@/tcl/unix/tclUnixFCmd.c @V@/tcl/unix/tclFCmd.c
+@V@/tcl/unix/tclUnixFile.c @V@/tcl/unix/tclFile.c
+@V@/tcl/unix/tclUnixTest.c @V@/tcl/unix/tclTest.c
+@V@/tcl/unix/tclUnixTime.c @V@/tcl/unix/tclTime.c
+@V@/tk/doc/ConfigWidg.3 @V@/tk/doc/CfgWidg.3
+@V@/tk/doc/ConfigWind.3 @V@/tk/doc/CfgWind.3
+@V@/tk/library/images/pwrdLogo100.gif @V@/tk/library/images/pwLogo100.gif
+@V@/tk/library/images/pwrdLogo150.gif @V@/tk/library/images/pwLogo150.gif
+@V@/tk/library/images/pwrdLogo175.gif @V@/tk/library/images/pwLogo175.gif
+@V@/tk/library/images/pwrdLogo200.gif @V@/tk/library/images/pwLogo200.gif
+@V@/tk/library/images/pwrdLogo75.gif @V@/tk/library/images/pwLogo75.gif
+@V@/tk/mac/tkMacMenu.c @V@/tk/mac/tkMenu.c
+@V@/tk/mac/tkMacMenubutton.c @V@/tk/mac/tkMenubutton.c
+@V@/tk/mac/tkMacMenus.c @V@/tk/mac/tkMenus.c
+@V@/tk/tests/option.file1 @V@/tk/tests/option1.file
+@V@/tk/tests/option.file2 @V@/tk/tests/option2.file
+@V@/tk/unix/tkConfig.sh.in @V@/tk/unix/tkConfig.sh-in
+@V@/tk/unix/tkUnixFocus.c @V@/tk/unix/tkFocus.c
+@V@/tk/unix/tkUnixFont.c @V@/tk/unix/tkFont.c
+@V@/tk/unix/tkUnixMenu.c @V@/tk/unix/tkMenu.c
+@V@/tk/unix/tkUnixMenubu.c @V@/tk/unix/tkMenubu.c
+@V@/tk/unix/tkUnixScale.c @V@/tk/unix/tkScale.c
+@V@/tk/unix/tkUnixScrlbr.c @V@/tk/unix/tkScrlbr.c
+@V@/tk/unix/tkUnixSelect.c @V@/tk/unix/tkSelect.c
+@V@/tk/unix/tkUnixSend.c @V@/tk/unix/tkSend.c
Index: djconfig.sh
===================================================================
--- djconfig.sh (nonexistent)
+++ djconfig.sh (revision 33)
@@ -0,0 +1,180 @@
+#!/bin/sh
+#
+# This shell script is a wrapper to the main configure script when
+# configuring GDB for DJGPP. 99% of it can also be used when
+# configuring other GNU programs for DJGPP.
+#
+#=====================================================================
+# Copyright 1997,1999,2000,2001,2002,2003,2005,2007,2008
+# Free Software Foundation, Inc.
+#
+# Originally written by Robert Hoehne, revised by Eli Zaretskii.
+# This file is part of GDB.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+#=====================================================================
+#
+# Call this script like the main configure script with one exception. If you
+# want to pass parameters to configure, you have to pass as the first
+# argument the srcdir, even when it is `.' !!!!!
+#
+# First, undo any CDPATH settings; they will get in our way when we
+# chdir to directories.
+unset CDPATH
+
+# Where are the sources? If you are used to having the sources
+# in a separate directory and the objects in another, then set
+# here the full path to the source directory and run this script
+# in the directory where you want to build gdb!!
+# You might give the source directory on commandline, but use
+# then only forward slashes (/) in the directories. It should be
+# an absolute path.
+
+if [ x$1 = x ]; then
+ srcdir=`pwd`
+else
+ srcdir=`cd $1 && pwd`
+ shift
+fi
+
+# Make sure they don't have some file names mangled by untarring.
+echo -n "Checking the unpacked distribution..."
+if ( ! test -f ${srcdir}/bfd/ChangeLog.0203 || \
+ ! test -f ${srcdir}/gdb/ChangeLog.002 || \
+ ! test -f ${srcdir}/opcodes/ChangeLog.0203 || \
+ ! test -f ${srcdir}/readline/config.h-in ) ; then
+ if ( ! test -f ${srcdir}/bfd/ChangeLog.0203 ) ; then
+ notfound=${srcdir}/bfd/ChangeLog.0203
+ else
+ if ( ! test -f ${srcdir}/gdb/ChangeLog.002) ; then
+ notfound=${srcdir}/gdb/ChangeLog.002
+ else
+ if ( ! test -f ${srcdir}/readline/config.h-in ) ; then
+ notfound=${srcdir}/readline/config.h-in
+ else
+ if ( ! test -f ${srcdir}/opcodes/ChangeLog.0203 ) ; then
+ notfound=${srcdir}/opcodes/ChangeLog.0203
+ fi
+ fi
+ fi
+ fi
+ echo " FAILED."
+ echo "(File $notfound was not found.)"
+ echo ""
+ echo "You MUST unpack the sources with the DJTAR command, like this:"
+ echo ""
+ echo " djtar -x -n fnchange.lst gdb-X.YZ.tar.gz"
+ echo ""
+ echo "where X.YZ is the GDB version, and fnchange.lst can be found"
+ echo "in the gdb/config/djgpp/ directory in the GDB distribution."
+ echo ""
+ echo "configure FAILED!"
+ exit 1
+else
+ echo " ok."
+fi
+
+# Where is the directory with DJGPP-specific scripts?
+DJGPPDIR=${srcdir}/gdb/config/djgpp
+
+echo "Editing configure scripts for DJGPP..."
+TMPFILE="${TMPDIR-.}/cfg.tmp"
+
+# We need to skip the build directory if it is a subdirectory of $srcdir,
+# otherwise we will have an infinite recursion on our hands...
+if test "`pwd`" == "${srcdir}" ; then
+ SKIPDIR=""
+ SKIPFILES=""
+else
+ SKIPDIR=`pwd | sed -e "s|${srcdir}|.|"`
+ SKIPFILES="${SKIPDIR}/*"
+fi
+
+# We use explicit /dev/env/DJDIR/bin/find to avoid catching
+# an incompatible DOS/Windows version that might be on their PATH.
+for fix_dir in \
+ `cd $srcdir && /dev/env/DJDIR/bin/find . -type d ! -ipath "${SKIPDIR}" ! -ipath "${SKIPFILES}"`
+do
+ if test ! -f ${fix_dir}/configure.orig ; then
+ if test -f ${srcdir}/${fix_dir}/configure ; then
+ mkdir -p ${fix_dir}
+ cp -p ${srcdir}/${fix_dir}/configure ${fix_dir}/configure.orig
+ fi
+ fi
+ if test -f ${fix_dir}/configure.orig ; then
+ sed -f ${DJGPPDIR}/config.sed ${fix_dir}/configure.orig > $TMPFILE
+ update $TMPFILE ${fix_dir}/configure
+ touch ./${fix_dir}/configure -r ${fix_dir}/configure.orig
+ rm -f $TMPFILE
+ fi
+ if test -f ${fix_dir}/INSTALL ; then
+ mv ${fix_dir}/INSTALL ${fix_dir}/INSTALL.txt
+ fi
+done
+
+# Now set the config shell. It is really needed, that the shell
+# points to a shell with full path and also it must conatain the
+# .exe suffix. I assume here, that bash is installed. If not,
+# install it. Additionally, the pathname must not contain a
+# drive letter, so use the /dev/x/foo format supported by versions
+# of Bash 2.03 and later, and by all DJGPP programs compiled with
+# v2.03 (or later) library.
+export CONFIG_SHELL=/dev/env/DJDIR/bin/sh.exe
+
+# force to have the ltmain.sh script to be in DOS text format,
+# otherwise the resulting ltconfig script will have mixed
+# (UNIX/DOS) format and is unusable with Bash ports before v2.03.
+utod $srcdir/ltmain.sh
+
+# Give the configure script some hints:
+export LD=ld
+export NM=nm
+export CC=gcc
+export CFLAGS="-O2 -g"
+export RANLIB=ranlib
+export DEFAULT_YACC="bison -y"
+export YACC="bison -y"
+export DEFAULT_LEX=flex
+# Define explicitly the .exe extension because on W95 with LFN=y
+# the check might fail
+export am_cv_exeext=.exe
+# ltconfig wants to compute the maximum command-line length, but
+# Bash 2.04 doesn't like that (it doesn't have any limit ;-), and
+# reboots the system. We know our limit in advance, so we don't
+# need all that crap. Assuming that the environment size is less
+# than 4KB, we can afford 12KB of command-line arguments.
+export lt_cv_sys_max_cmd_len=12288
+
+# The configure script needs to see the `install-sh' script, otherwise
+# it decides the source installation is broken. But "make install" will
+# fail on 8+3 filesystems if it finds a file `install-', since there
+# are numerous "install-foo" targets in Makefile's. So we rename the
+# offending file after the configure step is done.
+if test ! -f ${srcdir}/install-sh ; then
+ if test -f ${srcdir}/install-.sh ; then
+ mv ${srcdir}/install-.sh ${srcdir}/install-sh
+ fi
+fi
+
+# Now run the configure script while disabling some things like the NLS
+# support, which is nearly impossible to be supported in the current way,
+# since it relies on file names which will never work on DOS.
+echo "Running the configure script..."
+$srcdir/configure --srcdir="$srcdir" --prefix='${DJDIR}' \
+ --disable-shared --disable-nls --verbose --enable-build-warnings=\
+-Wimplicit,-Wcomment,-Wformat,-Wparentheses,-Wpointer-arith,-Wuninitialized $*
+
+if test -f ${srcdir}/install- ; then
+ mv ${srcdir}/install- ${srcdir}/install-.sh
+fi
djconfig.sh
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: README
===================================================================
--- README (nonexistent)
+++ README (revision 33)
@@ -0,0 +1,189 @@
+
+ How to build and install the DJGPP native version of GDB
+ ********************************************************
+
+General
+=======
+
+GDB built with DJGPP supports native DJGPP debugging, whereby you run
+gdb.exe and the program being debugged on the same machine. In
+addition, this version supports remote debugging via a serial port,
+provided that the target machine has a GDB-compatible debugging stub
+which can be linked with the target program (see the section "Remote
+Serial" in the GDB manual for more details).
+
+
+Installation of the binary distribution
+=======================================
+
+Simply unzip the gdbNNNb.zip file (where NNN is the version number)
+from the top DJGPP installation directory. Be sure to preserve the
+directory structure while you unzip (use -d switch if you do this with
+PKUNZIP). On Windows 9X and Windows 2000, use an unzip program which
+supports long file names; one such program is unzip32.exe, available
+from the DJGPP sites.
+
+If you need the libraries which are built as part of GDB, install the
+companion file gdbNNNa.zip. This allows to develop applications which
+use the same functions as GDB. For example, you can build your own
+front end to the debugger.
+
+
+Rebuilding GDB from sources
+===========================
+
+1. Prerequisites
+ -------------
+To build the package, you will need the DJGPP development environment
+(GCC, header files, and the libraries), and also DJGPP ports of the
+following tools:
+
+ - GNU Make 3.79.1 or later
+ - Bash 2.03 or later
+ - GNU Sed
+ - GNU Fileutils
+ - GNU Textutils 2.0 or later
+ - GNU Sh-utils
+ - GNU Grep 2.4 or later
+ - GNU Findutils
+ - GNU Awk 3.04 or later
+ - GNU Bison (only if you change one of the gdb/*.y files)
+ - Groff (only if you need to format the man pages)
+ - GNU Diffutils (only if you run the test suite)
+
+These programs should be available from the DJGPP sites, in the v2gnu
+directory. In addition, the configuration script invokes the `update'
+and `utod' utilities which are part of the basic DJGPP development kit
+(djdevNNN.zip).
+
+
+2. Unpacking the sources
+ ---------------------
+If you download the source distribution from one of the DJGPP sites,
+just unzip it while preserving the directory structure (I suggest to
+use unzip32.exe available with the rest of DJGPP), and proceed to the
+section "How to build", below.
+
+Source distributions downloaded from one of the GNU FTP sites need
+some more work to unpack. First, you MUST use the `djunpack' batch
+file to unzip the package. That's because some file names in the
+official distributions need to be changed to avoid problems on the
+various platforms supported by DJGPP. `djunpack' invokes the `djtar'
+program (that is part of the basic DJGPP development kit) to rename
+these files on the fly given a file with name mappings; the
+distribution includes a file `gdb/config/djgpp/fnchange.lst' with the
+necessary mappings. So you need first to retrieve that batch file,
+and then invoke it to unpack the distribution. Here's how:
+
+ djtar -x -p -o gdb-5.2/djunpack.bat gdb-5.2.tar.gz > djunpack.bat
+ djunpack gdb-5.2.tar.gz
+
+(The name of the distribution archive and the leading directory of the
+path to `djunpack.bat' in the distribution will be different for
+versions of GDB other than 5.2.)
+
+If the argument to `djunpack.bat' include leading directories, it MUST
+be given with the DOS-style backslashes; Unix-style forward slashes
+will NOT work.
+
+If the distribution comes as a .tar.bz2 archive, and your version of
+`djtar' doesn't support bzip2 decompression, you need to unpack it as
+follows:
+
+ bunzip2 gdb-6.4.tar.bz2
+ djtar -x -p -o gdb-6.4/djunpack.bat gdb-6.4.tar > djunpack.bat
+ djunpack gdb-6.4.tar
+
+
+3. How to build
+ ------------
+
+If the source distribution available from DJGPP archives is already
+configured for DJGPP v2.x (if it is, you will find files named
+`Makefile' in each subdirectory), then just invoke Make:
+
+ make
+
+To build a package that is not yet configured, or if you downloaded
+GDB from a GNU FTP site, you will need to configure it first. You
+will also need to configure it if you want to change the configuration
+options (e.g., compile without support for the GDBMI interface). To
+configure GDB, type this command:
+
+ sh ./gdb/config/djgpp/djconfig.sh
+
+This script checks the unpacked distribution, then edits the configure
+scripts in the various subdirectories, to make them suitable for
+DJGPP, and finally invokes the top-level configure script, which
+recursively configures all the subdirectories.
+
+You may pass optional switches to djconfig.sh. It accepts all the
+switches accepted by the original GDB configure script. These
+switches are described in the file gdb/README, and their full list can
+be displayed by running the following command:
+
+ sh ./gdb/configure --help
+
+NOTE: if you *do* use optional command-line switches, you MUST pass
+to the script the name of the directory where GDB sources are
+unpacked--even if you are building GDB in-place! For example:
+
+ sh ./gdb/config/djgpp/djconfig.sh . --disable-gdbmi
+
+It is also possible to build GDB in a directory that is different from
+the one where the sources were unpacked. In that case, you have to
+pass the source directory as the first argument to the script:
+
+ sh ./gdb/config/djgpp/djconfig.sh d:/gnu/gdb-6.4
+
+You MUST use forward slashes in the first argument.
+
+After the configure script finishes, run Make:
+
+ make
+
+If you want to produce the documentation (for example, if you changed
+some of the Texinfo sources), type this:
+
+ make info
+
+When Make finishes, you can install the package:
+
+ make install prefix='${DJDIR}' INSTALL='ginstall -c'
+
+The above doesn't install the docs; for that you will need to say
+this:
+
+ make install-info prefix='${DJDIR}' INSTALL='ginstall -c'
+
+The test suite has been made to work with DJGPP. If you make a change
+in some of the programs, or want to be sure you have a fully
+functional GDB executable, it is a good idea to run the test suite.
+You cannot use "make check" for that, since it will want to run the
+`dejagnu' utility which DJGPP doesn't support. Instead, use the special
+script gdb/config/djgpp/djcheck.sh, like this:
+
+ cd gdb/testsuite
+ sh ../config/djgpp/djcheck.sh
+
+This will run for a while and should not print anything, except the
+messages "Running tests in DIR", where DIR is one of the
+subdirectories of the testsuite. Any test that fails to produce the
+expected output will cause the diffs between the expected and the
+actual output be printed, and in addition will leave behind a file
+SOMETHING.tst (where SOMETHING is the name of the failed test). You
+should compare each of the *.tst files with the corresponding *.out
+file and convince yourself that the differences do not indicate a real
+problem. Examples of differences you can disregard are changes in the
+copyright blurb printed by GDB, values of unitialized variables,
+addresses of global variables like argv[] and envp[] (which depend on
+the size of your environment), etc.
+
+Note that djcheck.sh only recurses into those of the subdirectories of
+the test suite which test features supported by the DJGPP port of GDB.
+For example, the tests in the gdb.gdbtk, gdb.threads, and gdb.hp
+directories are not run.
+
+
+Enjoy,
+ Eli Zaretskii
README
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property