OpenCores
URL https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk

Subversion Repositories openrisc_2011-10-31

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /openrisc/tags/gdb/gdb-6.8/gdb-6.8.openrisc-2.1/gdb/testsuite/lib
    from Rev 24 to Rev 33
    ↔ Reverse comparison
  •

Rev 24 → Rev 33

/ada.exp
0,0 → 1,431
# Copyright 2004, 2007, 2008 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
load_lib libgloss.exp
 
# FIXME:brobecker/2004-03-31:
# The following function should eventually be part of dejagnu. Even after
# this function becomes available in dejagnu, we will keep for a while
# a copy of this function here in order to avoid increasing the dejagnu
# version requirement.
 
proc gdb_find_gnatmake {} {
global tool_root_dir
 
set root "$tool_root_dir/gcc"
set GM ""
 
if ![is_remote host] {
set file [lookfor_file $root gnatmake]
if { $file != "" } {
set GM "$file -I$root/ada/rts --GCC=$root/xgcc --GNATBIND=$root/gnatbind --GNATLINK=$root/gnatlink -cargs -B$root -largs --GCC=$root/xgcc -margs";
}
}
 
if {$GM == ""} {
set GM [transform gnatmake]
}
 
return $GM
}
 
# FIXME:brobecker/2004-03-31:
# The following function is a copy of the function of the same name provided
# by dejagnu, except that it has been modified to add support for building
# Ada programs. This copy is temporarily placed here until the changes
# are merged into the dejagnu official release. Once the changes are merged,
# we will likely keep this local copy for a while to avoid increasing the
# dejagnu version requirement.
 
proc gdb_default_target_compile {source destfile type options} {
global target_triplet
global tool_root_dir
global CFLAGS_FOR_TARGET
global compiler_flags
 
if { $destfile == "" && $type != "preprocess" && $type != "none" } {
error "Must supply an output filename for the compile to default_target_compile"
}
 
set add_flags ""
set libs ""
set compiler_type "c"
set compiler ""
set ldflags ""
set dest [target_info name]
 
if [info exists CFLAGS_FOR_TARGET] {
append add_flags " $CFLAGS_FOR_TARGET"
}
 
if [info exists target_info(host,name)] {
set host [host_info name];
} else {
set host "unix";
}
 
foreach i $options {
if { $i == "ada" } {
set compiler_type "ada"
if [board_info $dest exists adaflags] {
append add_flags " [target_info adaflags]"
}
# append add_flags " [gnatmake_include_flags]";
if [board_info $dest exists gnatmake] {
set compiler [target_info gnatmake];
} else {
set compiler [find_gnatmake];
}
}
 
if { $i == "c++" } {
set compiler_type "c++"
if [board_info $dest exists cxxflags] {
append add_flags " [target_info cxxflags]"
}
append add_flags " [g++_include_flags]";
if [board_info $dest exists c++compiler] {
set compiler [target_info c++compiler];
} else {
set compiler [find_g++];
}
}
 
if { $i == "f77" } {
set compiler_type "f77"
if [board_info $dest exists f77flags] {
append add_flags " [target_info f77flags]"
}
# append add_flags " [f77_include_flags]"
if [board_info $dest exists f77compiler] {
set compiler [target_info f77compiler]
} else {
set compiler [find_g77]
}
}
 
if [regexp "^dest=" $i] {
regsub "^dest=" $i "" tmp
if [board_info $tmp exists name] {
set dest [board_info $tmp name];
} else {
set dest $tmp;
}
}
if [regexp "^compiler=" $i] {
regsub "^compiler=" $i "" tmp
set compiler $tmp
}
if [regexp "^additional_flags=" $i] {
regsub "^additional_flags=" $i "" tmp
append add_flags " $tmp"
}
if [regexp "^ldflags=" $i] {
regsub "^ldflags=" $i "" tmp
append ldflags " $tmp"
}
if [regexp "^libs=" $i] {
regsub "^libs=" $i "" tmp
append libs " $tmp"
}
if [regexp "^incdir=" $i] {
regsub "^incdir=" $i "-I" tmp
append add_flags " $tmp"
}
if [regexp "^libdir=" $i] {
regsub "^libdir=" $i "-L" tmp
append add_flags " $tmp"
}
if [regexp "^ldscript=" $i] {
regsub "^ldscript=" $i "" ldscript
}
if [regexp "^redirect=" $i] {
regsub "^redirect=" $i "" redirect
}
if [regexp "^optimize=" $i] {
regsub "^optimize=" $i "" optimize
}
if [regexp "^timeout=" $i] {
regsub "^timeout=" $i "" timeout
}
}
 
if [board_info $host exists cflags_for_target] {
append add_flags " [board_info $host cflags_for_target]";
}
 
global CC_FOR_TARGET
global CXX_FOR_TARGET
global F77_FOR_TARGET
global GNATMAKE_FOR_TARGET
if [info exists CC_FOR_TARGET] {
if { $compiler == "" } {
set compiler $CC_FOR_TARGET
}
}
 
if [info exists CXX_FOR_TARGET] {
if { $compiler_type == "c++" } {
set compiler $CXX_FOR_TARGET
}
}
 
if [info exists F77_FOR_TARGET] {
if { $compiler_type == "f77" } {
set compiler $F77_FOR_TARGET
}
}
 
if [info exists GNATMAKE_FOR_TARGET] {
if { $compiler_type == "ada" } {
set compiler $GNATMAKE_FOR_TARGET
}
}
 
if { $compiler == "" } {
set compiler [board_info $dest compiler];
if { $compiler == "" } {
return "default_target_compile: No compiler to compile with";
}
}
 
if ![is_remote host] {
if { [which $compiler] == 0 } {
return "default_target_compile: Can't find $compiler."
}
}
 
if {$type == "object"} {
append add_flags " -c"
}
 
if { $type == "preprocess" } {
append add_flags " -E"
}
if { $type == "assembly" } {
append add_flags " -S"
}
 
if [board_info $dest exists cflags] {
append add_flags " [board_info $dest cflags]"
}
 
if { $type == "executable" } {
# This must be added here.
# if [board_info $dest exists ldscript] {
# append add_flags " [board_info $dest ldscript]"
# }
 
if [board_info $dest exists ldflags] {
append add_flags " [board_info $dest ldflags]"
}
if { $compiler_type == "c++" } {
append add_flags " [g++_link_flags]";
}
if [isnative] {
# This is a lose.
catch "glob -nocomplain $tool_root_dir/libstdc++/libstdc++.so* $tool_root_dir/libstdc++/libstdc++.sl" tmp
if { ${tmp} != "" } {
if [regexp ".*solaris2.*" $target_triplet] {
# Solaris 2
append add_flags " -R$tool_root_dir/libstdc++"
} elseif [regexp ".*(osf|irix5|linux).*" $target_triplet] {
# OSF/1 or Irix5
append add_flags " -Wl,-rpath,$tool_root_dir/libstdc++"
} elseif [regexp ".*hppa.*" $target_triplet] {
# HP/UX
append add_flags " -Wl,-a,shared_archive"
}
}
}
}
 
if ![info exists ldscript] {
set ldscript [board_info $dest ldscript]
}
 
foreach i $options {
if { $i == "debug" } {
if [board_info $dest exists debug_flags] {
append add_flags " [board_info $dest debug_flags]";
} else {
append add_flags " -g"
}
}
}
 
if [info exists optimize] {
append add_flags " $optimize";
}
 
if { $type == "executable" } {
append add_flags " $ldflags"
foreach x $libs {
if [file exists $x] {
append source " $x"
} else {
append add_flags " $x";
}
}
 
if [board_info $dest exists libs] {
append add_flags " [board_info $dest libs]"
}
 
# This probably isn't such a good idea, but it avoids nasty
# hackiness in the testsuites.
# The math library must be linked in before the C library. The C
# library is linked in by the linker script, so this must be before
# the linker script.
if [board_info $dest exists mathlib] {
append add_flags " [board_info $dest mathlib]"
} else {
append add_flags " -lm"
}
 
# This must be added here.
append add_flags " $ldscript";
 
if [board_info $dest exists remote_link] {
# Relink option.
append add_flags " -Wl,-r"
}
if [board_info $dest exists output_format] {
append add_flags " -Wl,-oformat,[board_info $dest output_format]";
}
}
 
if [board_info $dest exists multilib_flags] {
append add_flags " [board_info $dest multilib_flags]";
}
 
verbose "doing compile"
 
set sources ""
if [is_remote host] {
foreach x $source {
set file [remote_download host $x];
if { $file == "" } {
warning "Unable to download $x to host."
return "Unable to download $x to host."
} else {
append sources " $file";
}
}
} else {
set sources $source
}
 
if [is_remote host] {
append add_flags " -o a.out"
remote_file host delete a.out;
} else {
if { $destfile != "" } {
append add_flags " -o $destfile";
}
}
 
# This is obscure: we put SOURCES at the end when building an
# object, because otherwise, in some situations, libtool will
# become confused about the name of the actual source file.
if {$type == "object"} {
set opts "$add_flags $sources"
} else {
set opts "$sources $add_flags"
}
 
if [is_remote host] {
if [host_info exists use_at] {
set fid [open "atfile" "w"];
puts $fid "$opts";
close $fid;
set opts "@[remote_download host atfile]"
remote_file build delete atfile
}
}
 
verbose "Invoking the compiler as $compiler $opts" 2
 
if [info exists redirect] {
verbose "Redirecting output to $redirect" 2
set status [remote_exec host "$compiler $opts" "" "" $redirect];
} else {
if [info exists timeout] {
verbose "Setting timeout to $timeout" 2
set status [remote_exec host "$compiler $opts" "" "" "" $timeout];
} else {
set status [remote_exec host "$compiler $opts"];
}
}
 
set compiler_flags $opts
if [is_remote host] {
remote_upload host a.out $destfile;
remote_file host delete a.out;
}
set comp_output [prune_warnings [lindex $status 1]];
regsub "^\[\r\n\]+" $comp_output "" comp_output;
if { [lindex $status 0] != 0 } {
verbose -log "compiler exited with status [lindex $status 0]";
}
if { [lindex $status 1] != "" } {
verbose -log "output is:\n[lindex $status 1]" 2;
}
if { [lindex $status 0] != 0 && "${comp_output}" == "" } {
set comp_output "exit status is [lindex $status 0]";
}
return ${comp_output};
}
 
# See if the version of dejaGNU being used to run the testsuite is
# recent enough to contain support for building Ada programs or not.
# If not, then use the functions above in place of the ones provided
# by dejaGNU. This is only temporary (brobecker/2004-03-31).
 
if {[info procs find_gnatmake] == ""} {
proc find_gnatmake { } { return [gdb_find_gnatmake] }
proc default_target_compile { source destfile type options } {
return [gdb_default_target_compile $source $destfile $type $options]
}
}
 
# Compile some Ada code.
 
proc gdb_compile_ada {source dest type options} {
 
set srcdir [file dirname $source]
set gprdir [file dirname $srcdir]
set objdir [file dirname $dest]
 
append options " ada"
append options " additional_flags=-P$gprdir/gnat_ada"
append options " additional_flags=-XSRC=[file tail $srcdir]"
append options " additional_flags=-XOBJ=$objdir"
 
set result [target_compile [file tail $source] $dest $type $options]
 
# The Ada build always produces some output, even when the build
# succeeds. Thus, we can not use the output the same way we do in
# gdb_compile to determine whether the build has succeeded or not.
# We therefore simply check whether the dest file has been created
# or not. Unless not present, the build has succeeded.
if ![file exists $dest] {
unsupported "Ada compilation failed: $result"
return "Ada compilation failed."
}
}
 
/trace-support.exp
0,0 → 1,306
# Copyright (C) 1998, 2007, 2008 Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
 
 
#
# Support procedures for trace testing
#
 
 
#
# Procedure: gdb_target_supports_trace
# Returns true if GDB is connected to a target that supports tracing.
# Allows tests to abort early if not running on a trace-aware target.
#
 
proc gdb_target_supports_trace { } {
global gdb_prompt
 
send_gdb "tstatus\n"
gdb_expect {
-re "\[Tt\]race can only be run on.*$gdb_prompt $" {
return 0
}
-re "\[Tt\]race can not be run on.*$gdb_prompt $" {
return 0
}
-re "\[Tt\]arget does not support.*$gdb_prompt $" {
return 0
}
-re ".*\[Ee\]rror.*$gdb_prompt $" {
return 0
}
-re ".*\[Ww\]arning.*$gdb_prompt $" {
return 0
}
-re ".*$gdb_prompt $" {
return 1
}
timeout {
return 0
}
}
}
 
 
#
# Procedure: gdb_delete_tracepoints
# Many of the tests depend on setting tracepoints at various places and
# running until that tracepoint is reached. At times, we want to start
# with a clean slate with respect to tracepoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
 
proc gdb_delete_tracepoints {} {
global gdb_prompt
 
send_gdb "delete tracepoints\n"
gdb_expect 30 {
-re "Delete all tracepoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
}
-re ".*$gdb_prompt $" { # This happens if there were no tracepoints }
timeout {
perror "Delete all tracepoints in delete_tracepoints (timeout)"
return
}
}
send_gdb "info tracepoints\n"
gdb_expect 30 {
-re "No tracepoints.*$gdb_prompt $" {}
-re "$gdb_prompt $" { perror "tracepoints not deleted" ; return }
timeout { perror "info tracepoints (timeout)" ; return }
}
}
 
#
# Procedure: gdb_trace_setactions
# Define actions for a tracepoint.
# Arguments:
# testname -- identifying string for pass/fail output
# tracepoint -- to which tracepoint do these actions apply? (optional)
# args -- list of actions to be defined.
# Returns:
# zero -- success
# non-zero -- failure
 
proc gdb_trace_setactions { testname tracepoint args } {
global gdb_prompt;
 
set state 0;
set passfail "pass";
send_gdb "actions $tracepoint\n";
set expected_result "";
gdb_expect 5 {
-re "No tracepoint number .*$gdb_prompt $" {
fail $testname
return 1;
}
-re "Enter actions for tracepoint $tracepoint.*>" {
if { [llength $args] > 0 } {
set lastcommand "[lindex $args $state]";
send_gdb "[lindex $args $state]\n";
incr state;
set expected_result [lindex $args $state];
incr state;
} else {
send_gdb "end\n";
}
exp_continue;
}
-re "\(.*\)\[\r\n\]+\[ \t]*> $" {
if { $expected_result != "" } {
regsub "^\[^\r\n\]+\[\r\n\]+" "$expect_out(1,string)" "" out;
if ![regexp $expected_result $out] {
set passfail "fail";
}
set expected_result "";
}
if { $state < [llength $args] } {
send_gdb "[lindex $args $state]\n";
incr state;
set expected_result [lindex $args $state];
incr state;
} else {
send_gdb "end\n";
set expected_result "";
}
exp_continue;
}
-re "\(.*\)$gdb_prompt $" {
if { $expected_result != "" } {
if ![regexp $expected_result $expect_out(1,string)] {
set passfail "fail";
}
set expected_result "";
}
if { [llength $args] < $state } {
set passfail "fail";
}
}
default {
set passfail "fail";
}
}
if { $testname != "" } {
$passfail $testname;
}
if { $passfail == "pass" } then {
return 0;
} else {
return 1;
}
}
 
#
# Procedure: gdb_tfind_test
# Find a specified trace frame.
# Arguments:
# testname -- identifying string for pass/fail output
# tfind_arg -- frame (line, PC, etc.) identifier
# exp_res -- Expected result of frame test
# args -- Test expression
# Returns:
# zero -- success
# non-zero -- failure
#
 
proc gdb_tfind_test { testname tfind_arg exp_res args } {
global gdb_prompt;
 
if { "$args" != "" } {
set expr "$exp_res";
set exp_res "$args";
} else {
set expr "(int) \$trace_frame";
}
set passfail "fail";
 
gdb_test "tfind $tfind_arg" "" ""
send_gdb "printf \"x \%d x\\n\", $expr\n";
gdb_expect 10 {
-re "x (-*\[0-9\]+) x" {
if { $expect_out(1,string) == $exp_res } {
set passfail "pass";
}
exp_continue;
}
-re "$gdb_prompt $" { }
}
$passfail "$testname";
if { $passfail == "pass" } then {
return 0;
} else {
return 1;
}
}
 
#
# Procedure: gdb_readexpr
# Arguments:
# gdb_expr -- the expression whose value is desired
# Returns:
# the value of gdb_expr, as evaluated by gdb.
# [FIXME: returns -1 on error, which is sometimes a legit value]
#
 
proc gdb_readexpr { gdb_expr } {
global gdb_prompt;
 
set result -1;
send_gdb "print $gdb_expr\n"
gdb_expect 5 {
-re "\[$\].*= (\[0-9\]+).*$gdb_prompt $" {
set result $expect_out(1,string);
}
-re "$gdb_prompt $" { }
default { }
}
return $result;
}
 
#
# Procedure: gdb_gettpnum
# Arguments:
# tracepoint (optional): if supplied, set a tracepoint here.
# Returns:
# the tracepoint ID of the most recently set tracepoint.
#
 
proc gdb_gettpnum { tracepoint } {
global gdb_prompt;
 
if { $tracepoint != "" } {
gdb_test "trace $tracepoint" "" ""
}
return [gdb_readexpr "\$tpnum"];
}
 
 
#
# Procedure: gdb_find_function_baseline
# Arguments:
# func_name -- name of source function
# Returns:
# Sourcefile line of function definition (open curly brace),
# or -1 on failure. Caller must check return value.
# Note:
# Works only for open curly brace at beginning of source line!
#
 
proc gdb_find_function_baseline { func_name } {
global gdb_prompt;
 
set baseline -1;
 
send_gdb "list $func_name\n"
# gdb_expect {
# -re "\[\r\n\]\[\{\].*$gdb_prompt $" {
# set baseline 1
# }
# }
}
 
#
# Procedure: gdb_find_function_baseline
# Arguments:
# filename: name of source file of desired function.
# Returns:
# Sourcefile line of function definition (open curly brace),
# or -1 on failure. Caller must check return value.
# Note:
# Works only for open curly brace at beginning of source line!
#
 
proc gdb_find_recursion_test_baseline { filename } {
global gdb_prompt;
 
set baseline -1;
 
gdb_test "list $filename:1" "" ""
send_gdb "search gdb_recursion_test line 0\n"
gdb_expect {
-re "(\[0-9\]+)\[\t \]+\{.*line 0.*$gdb_prompt $" {
set baseline $expect_out(1,string);
}
-re "$gdb_prompt $" { }
default { }
}
return $baseline;
}
/cp-support.exp
0,0 → 1,468
# This test code is part of GDB, the GNU debugger.
 
# Copyright 2003, 2004, 2007, 2008 Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
# Auxiliary function to check for known problems.
#
# EXPECTED_STRING is the string expected by the test.
#
# ACTUAL_STRING is the actual string output by gdb.
#
# ERRATA_TABLE is a list of lines of the form:
#
# { expected-string broken-string {eval-block} }
#
# If there is a line for the given EXPECTED_STRING, and if the
# ACTUAL_STRING output by gdb is the same as the BROKEN_STRING in the
# table, then I eval the eval-block.
 
proc cp_check_errata { expected_string actual_string errata_table } {
foreach erratum $errata_table {
if { "$expected_string" == [lindex $erratum 0]
&& "$actual_string" == [lindex $erratum 1] } then {
eval [lindex $erratum 2]
}
}
}
 
# Test ptype of a class.
#
# Different C++ compilers produce different output. To accommodate all
# the variations listed below, I read the output of "ptype" and process
# each line, matching it to the class description given in the
# parameters.
#
# IN_COMMAND and IN_TESTNAME are the command and testname for
# gdb_test_multiple. If IN_TESTNAME is the empty string, then it
# defaults to IN_COMMAND.
#
# IN_KEY is "class" or "struct". For now, I ignore it, and allow either
# "class" or "struct" in the output, as long as the access specifiers all
# work out okay.
#
# IN_TAG is the class tag or structure tag.
#
# IN_CLASS_TABLE is a list of class information. Each entry contains a
# keyword and some values. The keywords and their values are:
#
# { base "base-declaration" }
#
# the class has a base with the given declaration.
#
# { vbase "name" }
#
# the class has a virtual base pointer with the given name. this
# is for gcc 2.95.3, which emits ptype entries for the virtual base
# pointers. the vbase list includes both indirect and direct
# virtual base classes (indeed, a virtual base is usually
# indirect), so this information cannot be derived from the base
# declarations.
#
# { field "access" "declaration" }
#
# the class has a data field with the given access type and the
# given declaration.
#
# { method "access" "declaration" }
#
# the class has a member function with the given access type
# and the given declaration.
#
# If you test the same class declaration more than once, you can specify
# IN_CLASS_TABLE as "ibid". "ibid" means: look for a previous class
# table that had the same IN_KEY and IN_TAG, and re-use that table.
#
# IN_TAIL is the expected text after the close brace, specifically the "*"
# in "struct { ... } *". This is an optional parameter. The default
# value is "", for no tail.
#
# IN_ERRATA_TABLE is a list of errata entries. See cp_check_errata for the
# format of the errata table. Note: the errata entries are not subject to
# demangler syntax adjustment, so you have to make a bigger table
# with lines for each output variation.
#
# gdb can vary the output of ptype in several ways:
#
# . CLASS/STRUCT
#
# The output can start with either "class" or "struct", depending on
# what the symbol table reader in gdb decides. This is usually
# unrelated to the original source code.
#
# dwarf-2 debug info distinguishes class/struct, but gdb ignores it
# stabs+ debug info does not distinguish class/struct
# hp debug info distinguishes class/struct, and gdb honors it
#
# I tried to accommodate this with regular expressions such as
# "((class|struct) A \{ public:|struct A \{)", but that turns into a
# hairy mess because of optional private virtual base pointers and
# optional public synthetic operators. This is the big reason I gave
# up on regular expressions and started parsing the output.
#
# . REDUNDANT ACCESS SPECIFIER
#
# In "class { private: ... }" or "struct { public: ... }", gdb might
# or might not emit a redundant initial access specifier, depending
# on the gcc version.
#
# . VIRTUAL BASE POINTERS
#
# If a class has virtual bases, either direct or indirect, the class
# will have virtual base pointers. With gcc 2.95.3, gdb prints lines
# for these virtual base pointers. This does not happen with gcc
# 3.3.4, gcc 3.4.1, or hp acc A.03.45.
#
# I accept these lines. These lines are optional; but if I see one of
# these lines, then I expect to see all of them.
#
# Note: drow considers printing these lines to be a bug in gdb.
#
# . SYNTHETIC METHODS
#
# A C++ compiler may synthesize some methods: an assignment
# operator, a copy constructor, a constructor, and a destructor. The
# compiler might include debug information for these methods.
#
# dwarf-2 gdb does not show these methods
# stabs+ gdb shows these methods
# hp gdb does not show these methods
#
# I accept these methods. These lines are optional, and any or
# all of them might appear, mixed in anywhere in the regular methods.
#
# With gcc v2, the synthetic copy-ctor and ctor have an additional
# "int" parameter at the beginning, the "in-charge" flag.
#
# . DEMANGLER SYNTAX VARIATIONS
#
# Different demanglers produce "int foo(void)" versus "int foo()",
# "const A&" versus "const A &", and so on.
#
# TESTED WITH
#
# gcc 2.95.3 -gdwarf-2
# gcc 2.95.3 -gstabs+
# gcc 3.3.4 -gdwarf-2
# gcc 3.3.4 -gstabs+
# gcc 3.4.1 -gdwarf-2
# gcc 3.4.1 -gstabs+
# gcc HEAD 20040731 -gdwarf-2
# gcc HEAD 20040731 -gstabs+
#
# TODO
#
# Tagless structs.
#
# "A*" versus "A *" and "A&" versus "A &" in user methods.
#
# Test with hp ACC.
#
# -- chastain 2004-08-07
 
proc cp_test_ptype_class { in_command in_testname in_key in_tag in_class_table { in_tail "" } { in_errata_table { } } } {
global gdb_prompt
set wsopt "\[\r\n\t \]*"
 
# The test name defaults to the command.
 
if { "$in_testname" == "" } then { set in_testname "$in_command" }
 
# Save class tables in a history array for reuse.
 
global cp_class_table_history
if { $in_class_table == "ibid" } then {
if { ! [info exists cp_class_table_history("$in_key,$in_tag") ] } then {
fail "$in_testname // bad ibid"
return
}
set in_class_table $cp_class_table_history("$in_key,$in_tag")
} else {
set cp_class_table_history("$in_key,$in_tag") $in_class_table
}
 
# Split the class table into separate tables.
 
set list_bases { }
set list_vbases { }
set list_fields { }
set list_methods { }
 
foreach class_line $in_class_table {
switch [lindex $class_line 0] {
"base" { lappend list_bases [lindex $class_line 1] }
"vbase" { lappend list_vbases [lindex $class_line 1] }
"field" { lappend list_fields [lrange $class_line 1 2] }
"method" { lappend list_methods [lrange $class_line 1 2] }
default { fail "$in_testname // bad line in class table: $class_line"; return; }
}
}
 
# Construct a list of synthetic operators.
# These are: { count ccess-type regular-expression }.
 
set list_synth { }
lappend list_synth [list 0 "public" "$in_tag & operator=\\($in_tag const ?&\\);"]
lappend list_synth [list 0 "public" "$in_tag\\((int,|) ?$in_tag const ?&\\);"]
lappend list_synth [list 0 "public" "$in_tag\\((int|void|)\\);"]
 
# Actually do the ptype.
 
set parse_okay 0
gdb_test_multiple "$in_command" "$in_testname // parse failed" {
-re "type = (struct|class)${wsopt}(\[A-Za-z0-9_\]*)${wsopt}((:\[^\{\]*)?)${wsopt}\{(.*)\}${wsopt}(\[^\r\n\]*)\[\r\n\]+$gdb_prompt $" {
set parse_okay 1
set actual_key $expect_out(1,string)
set actual_tag $expect_out(2,string)
set actual_base_string $expect_out(3,string)
set actual_body $expect_out(5,string)
set actual_tail $expect_out(6,string)
}
}
if { ! $parse_okay } then { return }
 
# Check the actual key. It would be nice to require that it match
# the input key, but gdb does not support that. For now, accept any
# $actual_key as long as the access property of each field/method
# matches.
 
switch "$actual_key" {
"class" { set access "private" }
"struct" { set access "public" }
default {
cp_check_errata "class" "$actual_key" $in_errata_table
cp_check_errata "struct" "$actual_key" $in_errata_table
fail "$in_testname // wrong key: $actual_key"
return
}
}
 
# Check the actual tag.
 
if { "$actual_tag" != "$in_tag" } then {
cp_check_errata "$in_tag" "$actual_tag" $in_errata_table
fail "$in_testname // wrong tag: $actual_tag"
return
}
 
# Check the actual bases.
# First parse them into a list.
 
set list_actual_bases { }
if { "$actual_base_string" != "" } then {
regsub "^:${wsopt}" $actual_base_string "" actual_base_string
set list_actual_bases [split $actual_base_string ","]
}
 
# Check the base count.
 
if { [llength $list_actual_bases] < [llength $list_bases] } then {
fail "$in_testname // too few bases"
return
}
if { [llength $list_actual_bases] > [llength $list_bases] } then {
fail "$in_testname // too many bases"
return
}
 
# Check each base.
 
foreach actual_base $list_actual_bases {
set actual_base [string trim $actual_base]
set base [lindex $list_bases 0]
if { "$actual_base" != "$base" } then {
cp_check_errata "$base" "$actual_base" $in_errata_table
fail "$in_testname // wrong base: $actual_base"
return
}
set list_bases [lreplace $list_bases 0 0]
}
 
# Parse each line in the body.
 
set last_was_access 0
set vbase_match 0
 
foreach actual_line [split $actual_body "\r\n"] {
 
# Chomp the line.
 
set actual_line [string trim $actual_line]
if { "$actual_line" == "" } then { continue }
 
# Access specifiers.
 
if { [regexp "^(public|protected|private)${wsopt}:\$" "$actual_line" s0 s1] } then {
set access "$s1"
if { $last_was_access } then {
fail "$in_testname // redundant access specifier"
return
}
set last_was_access 1
continue
} else {
set last_was_access 0
}
 
# Optional virtual base pointer.
 
if { [ llength $list_vbases ] > 0 } then {
set vbase [lindex $list_vbases 0]
if { [ regexp "$vbase \\*(_vb.|_vb\\\$|__vb_)\[0-9\]*$vbase;" $actual_line ] } then {
if { "$access" != "private" } then {
cp_check_errata "private" "$access" $in_errata_table
fail "$in_testname // wrong access specifier for virtual base: $access"
return
}
set list_vbases [lreplace $list_vbases 0 0]
set vbase_match 1
continue
}
}
 
# Data field.
 
if { [llength $list_fields] > 0 } then {
set field_access [lindex [lindex $list_fields 0] 0]
set field_decl [lindex [lindex $list_fields 0] 1]
if { "$actual_line" == "$field_decl" } then {
if { "$access" != "$field_access" } then {
cp_check_errata "$field_access" "$access" $in_errata_table
fail "$in_testname // wrong access specifier for field: $access"
return
}
set list_fields [lreplace $list_fields 0 0]
continue
}
 
# Data fields must appear before synths and methods.
cp_check_errata "$field_decl" "$actual_line" $in_errata_table
fail "$in_testname // unrecognized line type 1: $actual_line"
return
}
 
# Method function.
 
if { [llength $list_methods] > 0 } then {
set method_access [lindex [lindex $list_methods 0] 0]
set method_decl [lindex [lindex $list_methods 0] 1]
if { "$actual_line" == "$method_decl" } then {
if { "$access" != "$method_access" } then {
cp_check_errata "$method_access" "$access" $in_errata_table
fail "$in_testname // wrong access specifier for method: $access"
return
}
set list_methods [lreplace $list_methods 0 0]
continue
}
 
# gcc 2.95.3 shows "foo()" as "foo(void)".
regsub -all "\\(\\)" $method_decl "(void)" method_decl
if { "$actual_line" == "$method_decl" } then {
if { "$access" != "$method_access" } then {
cp_check_errata "$method_access" "$access" $in_errata_table
fail "$in_testname // wrong access specifier for method: $access"
return
}
set list_methods [lreplace $list_methods 0 0]
continue
}
}
 
# Synthetic operators. These are optional and can be mixed in
# with the methods in any order, but duplicates are wrong.
#
# This test must come after the user methods, so that a user
# method which matches a synth-method pattern is treated
# properly as a user method.
 
set synth_match 0
for { set isynth 0 } { $isynth < [llength $list_synth] } { incr isynth } {
set synth [lindex $list_synth $isynth]
set synth_count [lindex $synth 0]
set synth_access [lindex $synth 1]
set synth_re [lindex $synth 2]
 
if { [ regexp "$synth_re" "$actual_line" ] } then {
 
if { "$access" != "$synth_access" } then {
cp_check_errata "$synth_access" "$access" $in_errata_table
fail "$in_testname // wrong access specifier for synthetic operator: $access"
return
}
 
if { $synth_count > 0 } then {
cp_check_errata "$actual_line" "$actual_line" $in_errata_table
fail "$in_testname // duplicate synthetic operator: $actual_line"
}
 
# Update the count in list_synth.
 
incr synth_count
set synth [list $synth_count $synth_access "$synth_re"]
set list_synth [lreplace $list_synth $isynth $isynth $synth]
 
# Match found.
 
set synth_match 1
break
}
}
if { $synth_match } then { continue }
 
# Unrecognized line.
 
if { [llength $list_methods] > 0 } then {
set method_decl [lindex [lindex $list_methods 0] 1]
cp_check_errata "$method_decl" "$actual_line" $in_errata_table
}
 
fail "$in_testname // unrecognized line type 2: $actual_line"
return
}
 
# Check for missing elements.
 
if { $vbase_match } then {
if { [llength $list_vbases] > 0 } then {
fail "$in_testname // missing virtual base pointers"
return
}
}
 
if { [llength $list_fields] > 0 } then {
fail "$in_testname // missing fields"
return
}
 
if { [llength $list_methods] > 0 } then {
fail "$in_testname // missing methods"
return
}
 
# Check the tail.
 
set actual_tail [string trim $actual_tail]
if { "$actual_tail" != "$in_tail" } then {
cp_check_errata "$in_tail" "$actual_tail" $in_errata_table
fail "$in_testname // wrong tail: $actual_tail"
return
}
 
# It all worked!
 
pass "$in_testname"
return
}
/gdb.exp
0,0 → 1,2645
# Copyright 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
# This file was written by Fred Fish. (fnf@cygnus.com)
 
# Generic gdb subroutines that should work for any target. If these
# need to be modified for any target, it can be done with a variable
# or by passing arguments.
 
if {$tool == ""} {
# Tests would fail, logs on get_compiler_info() would be missing.
send_error "`site.exp' not found, run `make site.exp'!\n"
exit 2
}
 
load_lib libgloss.exp
 
global GDB
 
if [info exists TOOL_EXECUTABLE] {
set GDB $TOOL_EXECUTABLE;
}
if ![info exists GDB] {
if ![is_remote host] {
set GDB [findfile $base_dir/../../gdb/gdb "$base_dir/../../gdb/gdb" [transform gdb]]
} else {
set GDB [transform gdb];
}
}
verbose "using GDB = $GDB" 2
 
global GDBFLAGS
if ![info exists GDBFLAGS] {
set GDBFLAGS "-nx"
}
verbose "using GDBFLAGS = $GDBFLAGS" 2
 
# The variable gdb_prompt is a regexp which matches the gdb prompt.
# Set it if it is not already set.
global gdb_prompt
if ![info exists gdb_prompt] then {
set gdb_prompt "\[(\]gdb\[)\]"
}
 
# The variable fullname_syntax_POSIX is a regexp which matches a POSIX
# absolute path ie. /foo/
set fullname_syntax_POSIX "/.*/"
# The variable fullname_syntax_UNC is a regexp which matches a Windows
# UNC path ie. \\D\foo\
set fullname_syntax_UNC {\\\\[^\\]+\\.+\\}
# The variable fullname_syntax_DOS_CASE is a regexp which matches a
# particular DOS case that GDB most likely will output
# ie. \foo\, but don't match \\.*\
set fullname_syntax_DOS_CASE {\\[^\\].*\\}
# The variable fullname_syntax_DOS is a regexp which matches a DOS path
# ie. a:\foo\ && a:foo\
set fullname_syntax_DOS {[a-zA-Z]:.*\\}
# The variable fullname_syntax is a regexp which matches what GDB considers
# an absolute path. It is currently debatable if the Windows style paths
# d:foo and \abc should be considered valid as an absolute path.
# Also, the purpse of this regexp is not to recognize a well formed
# absolute path, but to say with certainty that a path is absolute.
set fullname_syntax "($fullname_syntax_POSIX|$fullname_syntax_UNC|$fullname_syntax_DOS_CASE|$fullname_syntax_DOS)"
 
# Needed for some tests under Cygwin.
global EXEEXT
global env
 
if ![info exists env(EXEEXT)] {
set EXEEXT ""
} else {
set EXEEXT $env(EXEEXT)
}
 
set octal "\[0-7\]+"
 
### Only procedures should come after this point.
 
#
# gdb_version -- extract and print the version number of GDB
#
proc default_gdb_version {} {
global GDB
global GDBFLAGS
global gdb_prompt
set fileid [open "gdb_cmd" w];
puts $fileid "q";
close $fileid;
set cmdfile [remote_download host "gdb_cmd"];
set output [remote_exec host "$GDB -nw --command $cmdfile"]
remote_file build delete "gdb_cmd";
remote_file host delete "$cmdfile";
set tmp [lindex $output 1];
set version ""
regexp " \[0-9\]\[^ \t\n\r\]+" "$tmp" version
if ![is_remote host] {
clone_output "[which $GDB] version $version $GDBFLAGS\n"
} else {
clone_output "$GDB on remote host version $version $GDBFLAGS\n"
}
}
 
proc gdb_version { } {
return [default_gdb_version];
}
 
#
# gdb_unload -- unload a file if one is loaded
#
 
proc gdb_unload {} {
global verbose
global GDB
global gdb_prompt
send_gdb "file\n"
gdb_expect 60 {
-re "No executable file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "No symbol file now\[^\r\n\]*\[\r\n\]" { exp_continue }
-re "A program is being debugged already..*Kill it.*y or n. $"\
{ send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "Discard symbol table from .*y or n.*$" {
send_gdb "y\n"
exp_continue
}
-re "$gdb_prompt $" {}
timeout {
perror "couldn't unload file in $GDB (timed out)."
return -1
}
}
}
 
# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached. At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
 
proc delete_breakpoints {} {
global gdb_prompt
 
# we need a larger timeout value here or this thing just confuses
# itself. May need a better implementation if possible. - guo
#
send_gdb "delete breakpoints\n"
gdb_expect 100 {
-re "Delete all breakpoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
}
-re "$gdb_prompt $" { # This happens if there were no breakpoints
}
timeout { perror "Delete all breakpoints in delete_breakpoints (timeout)" ; return }
}
send_gdb "info breakpoints\n"
gdb_expect 100 {
-re "No breakpoints or watchpoints..*$gdb_prompt $" {}
-re "$gdb_prompt $" { perror "breakpoints not deleted" ; return }
-re "Delete all breakpoints.*or n.*$" {
send_gdb "y\n";
exp_continue
}
timeout { perror "info breakpoints (timeout)" ; return }
}
}
 
 
#
# Generic run command.
#
# The second pattern below matches up to the first newline *only*.
# Using ``.*$'' could swallow up output that we attempt to match
# elsewhere.
#
proc gdb_run_cmd {args} {
global gdb_prompt
 
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
 
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
send_gdb "continue\n";
gdb_expect 60 {
-re "Continu\[^\r\n\]*\[\r\n\]" {}
default {}
}
return;
}
 
if [target_info exists gdb,start_symbol] {
set start [target_info gdb,start_symbol];
} else {
set start "start";
}
send_gdb "jump *$start\n"
set start_attempt 1;
while { $start_attempt } {
# Cap (re)start attempts at three to ensure that this loop
# always eventually fails. Don't worry about trying to be
# clever and not send a command when it has failed.
if [expr $start_attempt > 3] {
perror "Jump to start() failed (retry count exceeded)";
return;
}
set start_attempt [expr $start_attempt + 1];
gdb_expect 30 {
-re "Continuing at \[^\r\n\]*\[\r\n\]" {
set start_attempt 0;
}
-re "No symbol \"_start\" in current.*$gdb_prompt $" {
perror "Can't find start symbol to run in gdb_run";
return;
}
-re "No symbol \"start\" in current.*$gdb_prompt $" {
send_gdb "jump *_start\n";
}
-re "No symbol.*context.*$gdb_prompt $" {
set start_attempt 0;
}
-re "Line.* Jump anyway.*y or n. $" {
send_gdb "y\n"
}
-re "The program is not being run.*$gdb_prompt $" {
if { [gdb_reload] != 0 } {
return;
}
send_gdb "jump *$start\n";
}
timeout {
perror "Jump to start() failed (timeout)";
return
}
}
}
if [target_info exists gdb_stub] {
gdb_expect 60 {
-re "$gdb_prompt $" {
send_gdb "continue\n"
}
}
}
return
}
 
if [target_info exists gdb,do_reload_on_run] {
if { [gdb_reload] != 0 } {
return;
}
}
send_gdb "run $args\n"
# This doesn't work quite right yet.
# Use -notransfer here so that test cases (like chng-sym.exp)
# may test for additional start-up messages.
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
-notransfer -re "Starting program: \[^\r\n\]*" {}
}
}
 
# Generic start command. Return 0 if we could start the program, -1
# if we could not.
 
proc gdb_start_cmd {args} {
global gdb_prompt
 
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$gdb_prompt $" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
 
if [target_info exists use_gdb_stub] {
return -1
}
 
send_gdb "start $args\n"
gdb_expect 60 {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
# Use -notransfer here so that test cases (like chng-sym.exp)
# may test for additional start-up messages.
-notransfer -re "Starting program: \[^\r\n\]*" {
return 0
}
}
return -1
}
 
# Set a breakpoint at FUNCTION. If there is an additional argument it is
# a list of options; the supported options are allow-pending and temporary.
 
proc gdb_breakpoint { function args } {
global gdb_prompt
global decimal
 
set pending_response n
if {[lsearch -exact [lindex $args 0] allow-pending] != -1} {
set pending_response y
}
 
set break_command "break"
if {[lsearch -exact [lindex $args 0] temporary] != -1} {
set break_command "tbreak"
}
 
send_gdb "$break_command $function\n"
# The first two regexps are what we get with -g, the third is without -g.
gdb_expect 30 {
-re "Breakpoint \[0-9\]* at .*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "Breakpoint \[0-9\]*: file .*, line $decimal.\r\n$gdb_prompt $" {}
-re "Breakpoint \[0-9\]* at .*$gdb_prompt $" {}
-re "Breakpoint \[0-9\]* \\(.*\\) pending.*$gdb_prompt $" {
if {$pending_response == "n"} {
fail "setting breakpoint at $function"
return 0
}
}
-re "Make breakpoint pending.*y or \\\[n\\\]. $" {
send_gdb "$pending_response\n"
exp_continue
}
-re "$gdb_prompt $" { fail "setting breakpoint at $function" ; return 0 }
timeout { fail "setting breakpoint at $function (timeout)" ; return 0 }
}
return 1;
}
 
# Set breakpoint at function and run gdb until it breaks there.
# Since this is the only breakpoint that will be set, if it stops
# at a breakpoint, we will assume it is the one we want. We can't
# just compare to "function" because it might be a fully qualified,
# single quoted C++ function specifier. If there's an additional argument,
# pass it to gdb_breakpoint.
 
proc runto { function args } {
global gdb_prompt
global decimal
 
delete_breakpoints
 
if ![gdb_breakpoint $function [lindex $args 0]] {
return 0;
}
 
gdb_run_cmd
# the "at foo.c:36" output we get with -g.
# the "in func" output we get without -g.
gdb_expect 30 {
-re "Break.* at .*:$decimal.*$gdb_prompt $" {
return 1
}
-re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" {
return 1
}
-re "$gdb_prompt $" {
fail "running to $function in runto"
return 0
}
timeout {
fail "running to $function in runto (timeout)"
return 0
}
}
return 1
}
 
#
# runto_main -- ask gdb to run until we hit a breakpoint at main.
# The case where the target uses stubs has to be handled
# specially--if it uses stubs, assuming we hit
# breakpoint() and just step out of the function.
#
proc runto_main { } {
global gdb_prompt
global decimal
 
if ![target_info exists gdb_stub] {
return [runto main]
}
 
delete_breakpoints
 
gdb_step_for_stub;
 
return 1
}
 
 
### Continue, and expect to hit a breakpoint.
### Report a pass or fail, depending on whether it seems to have
### worked. Use NAME as part of the test name; each call to
### continue_to_breakpoint should use a NAME which is unique within
### that test file.
proc gdb_continue_to_breakpoint {name} {
global gdb_prompt
set full_name "continue to breakpoint: $name"
 
send_gdb "continue\n"
gdb_expect {
-re "Breakpoint .* at .*\r\n$gdb_prompt $" {
pass $full_name
}
-re ".*$gdb_prompt $" {
fail $full_name
}
timeout {
fail "$full_name (timeout)"
}
}
}
 
 
# gdb_internal_error_resync:
#
# Answer the questions GDB asks after it reports an internal error
# until we get back to a GDB prompt. Decline to quit the debugging
# session, and decline to create a core file. Return non-zero if the
# resync succeeds.
#
# This procedure just answers whatever questions come up until it sees
# a GDB prompt; it doesn't require you to have matched the input up to
# any specific point. However, it only answers questions it sees in
# the output itself, so if you've matched a question, you had better
# answer it yourself before calling this.
#
# You can use this function thus:
#
# gdb_expect {
# ...
# -re ".*A problem internal to GDB has been detected" {
# gdb_internal_error_resync
# }
# ...
# }
#
proc gdb_internal_error_resync {} {
global gdb_prompt
 
set count 0
while {$count < 10} {
gdb_expect {
-re "Quit this debugging session\\? \\(y or n\\) $" {
send_gdb "n\n"
incr count
}
-re "Create a core file of GDB\\? \\(y or n\\) $" {
send_gdb "n\n"
incr count
}
-re "$gdb_prompt $" {
# We're resynchronized.
return 1
}
timeout {
perror "Could not resync from internal error (timeout)"
return 0
}
}
}
perror "Could not resync from internal error (resync count exceeded)"
return 0
}
 
 
# gdb_test_multiple COMMAND MESSAGE EXPECT_ARGUMENTS
# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# MESSAGE is a message to be printed with the built-in failure patterns
# if one of them matches. If MESSAGE is empty COMMAND will be used.
# EXPECT_ARGUMENTS will be fed to expect in addition to the standard
# patterns. Pattern elements will be evaluated in the caller's
# context; action elements will be executed in the caller's context.
# Unlike patterns for gdb_test, these patterns should generally include
# the final newline and prompt.
#
# Returns:
# 1 if the test failed, according to a built-in failure pattern
# 0 if only user-supplied patterns matched
# -1 if there was an internal error.
#
# You can use this function thus:
#
# gdb_test_multiple "print foo" "test foo" {
# -re "expected output 1" {
# pass "print foo"
# }
# -re "expected output 2" {
# fail "print foo"
# }
# }
#
# The standard patterns, such as "Program exited..." and "A problem
# ...", all being implicitly appended to that list.
#
proc gdb_test_multiple { command message user_code } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
upvar expect_out expect_out
 
if { $message == "" } {
set message $command
}
 
# TCL/EXPECT WART ALERT
# Expect does something very strange when it receives a single braced
# argument. It splits it along word separators and performs substitutions.
# This means that { "[ab]" } is evaluated as "[ab]", but { "\[ab\]" } is
# evaluated as "\[ab\]". But that's not how TCL normally works; inside a
# double-quoted list item, "\[ab\]" is just a long way of representing
# "[ab]", because the backslashes will be removed by lindex.
 
# Unfortunately, there appears to be no easy way to duplicate the splitting
# that expect will do from within TCL. And many places make use of the
# "\[0-9\]" construct, so we need to support that; and some places make use
# of the "[func]" construct, so we need to support that too. In order to
# get this right we have to substitute quoted list elements differently
# from braced list elements.
 
# We do this roughly the same way that Expect does it. We have to use two
# lists, because if we leave unquoted newlines in the argument to uplevel
# they'll be treated as command separators, and if we escape newlines
# we mangle newlines inside of command blocks. This assumes that the
# input doesn't contain a pattern which contains actual embedded newlines
# at this point!
 
regsub -all {\n} ${user_code} { } subst_code
set subst_code [uplevel list $subst_code]
 
set processed_code ""
set patterns ""
set expecting_action 0
foreach item $user_code subst_item $subst_code {
if { $item == "-n" || $item == "-notransfer" || $item == "-nocase" } {
lappend processed_code $item
continue
}
if {$item == "-indices" || $item == "-re" || $item == "-ex"} {
lappend processed_code $item
continue
}
if { $expecting_action } {
lappend processed_code "uplevel [list $item]"
set expecting_action 0
# Cosmetic, no effect on the list.
append processed_code "\n"
continue
}
set expecting_action 1
lappend processed_code $subst_item
if {$patterns != ""} {
append patterns "; "
}
append patterns "\"$subst_item\""
}
 
# Also purely cosmetic.
regsub -all {\r} $patterns {\\r} patterns
regsub -all {\n} $patterns {\\n} patterns
 
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
send_user "Looking to match \"$patterns\"\n"
send_user "Message is \"$message\"\n"
}
 
set result -1
set string "${command}\n";
if { $command != "" } {
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
if { $foo < [expr $len - 1] } {
set str [string range "$string" 0 $foo];
if { [send_gdb "$str"] != "" } {
global suppress_flag;
 
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
# since we're checking if each line of the multi-line
# command are 'accepted' by GDB here,
# we need to set -notransfer expect option so that
# command output is not lost for pattern matching
# - guo
gdb_expect 2 {
-notransfer -re "\[\r\n\]" { verbose "partial: match" 3 }
timeout { verbose "partial: timeout" 3 }
}
set string [string range "$string" [expr $foo + 1] end];
} else {
break;
}
}
if { "$string" != "" } {
if { [send_gdb "$string"] != "" } {
global suppress_flag;
 
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
}
}
 
if [target_info exists gdb,timeout] {
set tmt [target_info gdb,timeout];
} else {
if [info exists timeout] {
set tmt $timeout;
} else {
global timeout;
if [info exists timeout] {
set tmt $timeout;
} else {
set tmt 60;
}
}
}
 
set code {
-re ".*A problem internal to GDB has been detected" {
fail "$message (GDB internal error)"
gdb_internal_error_resync
}
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
set result -1;
}
}
append code $processed_code
append code {
-re "Ending remote debugging.*$gdb_prompt $" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_exit
gdb_start
set result -1
}
-re "Undefined\[a-z\]* command:.*$gdb_prompt $" {
perror "Undefined command \"$command\"."
fail "$message"
set result 1
}
-re "Ambiguous command.*$gdb_prompt $" {
perror "\"$command\" is not a unique command name."
fail "$message"
set result 1
}
-re "Program exited with code \[0-9\]+.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
set errmsg "$command (the program exited)"
}
fail "$errmsg"
set result -1
}
-re "EXIT code \[0-9\r\n\]+Program exited normally.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
set errmsg "$command (the program exited)"
}
fail "$errmsg"
set result -1
}
-re "The program is not being run.*$gdb_prompt $" {
if ![string match "" $message] then {
set errmsg "$message (the program is no longer running)"
} else {
set errmsg "$command (the program is no longer running)"
}
fail "$errmsg"
set result -1
}
-re "\r\n$gdb_prompt $" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
"<return>" {
send_gdb "\n"
perror "Window too small."
fail "$message"
set result -1
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
fail "$message"
set result -1
}
eof {
perror "Process no longer exists"
if { $message != "" } {
fail "$message"
}
return -1
}
full_buffer {
perror "internal buffer is full."
fail "$message"
set result -1
}
timeout {
if ![string match "" $message] then {
fail "$message (timeout)"
}
set result 1
}
}
 
set result 0
set code [catch {gdb_expect $tmt $code} string]
if {$code == 1} {
global errorInfo errorCode;
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
} elseif {$code == 2} {
return -code return $string
} elseif {$code == 3} {
return
} elseif {$code > 4} {
return -code $code $string
}
return $result
}
 
# gdb_test COMMAND PATTERN MESSAGE QUESTION RESPONSE
# Send a command to gdb; test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
# the \r\n sequence immediately before the gdb prompt.
# MESSAGE is an optional message to be printed. If this is
# omitted, then the pass/fail messages use the command string as the
# message. (If this is the empty string, then sometimes we don't
# call pass or fail at all; I don't understand this at all.)
# QUESTION is a question GDB may ask in response to COMMAND, like
# "are you sure?"
# RESPONSE is the response to send if QUESTION appears.
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc gdb_test { args } {
global verbose
global gdb_prompt
global GDB
upvar timeout timeout
 
if [llength $args]>2 then {
set message [lindex $args 2]
} else {
set message [lindex $args 0]
}
set command [lindex $args 0]
set pattern [lindex $args 1]
 
if [llength $args]==5 {
set question_string [lindex $args 3];
set response_string [lindex $args 4];
} else {
set question_string "^FOOBAR$"
}
 
return [gdb_test_multiple $command $message {
-re "\[\r\n\]*($pattern)\[\r\n\]+$gdb_prompt $" {
if ![string match "" $message] then {
pass "$message"
}
}
-re "(${question_string})$" {
send_gdb "$response_string\n";
exp_continue;
}
}]
}
# Test that a command gives an error. For pass or fail, return
# a 1 to indicate that more tests can proceed. However a timeout
# is a serious error, generates a special fail message, and causes
# a 0 to be returned to indicate that more tests are likely to fail
# as well.
 
proc test_print_reject { args } {
global gdb_prompt
global verbose
 
if [llength $args]==2 then {
set expectthis [lindex $args 1]
} else {
set expectthis "should never match this bogus string"
}
set sendthis [lindex $args 0]
if $verbose>2 then {
send_user "Sending \"$sendthis\" to gdb\n"
send_user "Looking to match \"$expectthis\"\n"
}
send_gdb "$sendthis\n"
#FIXME: Should add timeout as parameter.
gdb_expect {
-re "A .* in expression.*\\.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid syntax in expression.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Junk after end of expression.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid number.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Invalid character constant.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "No symbol table is loaded.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "No symbol .* in current context.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "Unmatched single quote.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "A character constant must contain at least one character.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re "$expectthis.*$gdb_prompt $" {
pass "reject $sendthis"
return 1
}
-re ".*$gdb_prompt $" {
fail "reject $sendthis"
return 1
}
default {
fail "reject $sendthis (eof or timeout)"
return 0
}
}
}
# Given an input string, adds backslashes as needed to create a
# regexp that will match the string.
 
proc string_to_regexp {str} {
set result $str
regsub -all {[]*+.|()^$\[\\]} $str {\\&} result
return $result
}
 
# Same as gdb_test, but the second parameter is not a regexp,
# but a string that must match exactly.
 
proc gdb_test_exact { args } {
upvar timeout timeout
 
set command [lindex $args 0]
 
# This applies a special meaning to a null string pattern. Without
# this, "$pattern\r\n$gdb_prompt $" will match anything, including error
# messages from commands that should have no output except a new
# prompt. With this, only results of a null string will match a null
# string pattern.
 
set pattern [lindex $args 1]
if [string match $pattern ""] {
set pattern [string_to_regexp [lindex $args 0]]
} else {
set pattern [string_to_regexp [lindex $args 1]]
}
 
# It is most natural to write the pattern argument with only
# embedded \n's, especially if you are trying to avoid Tcl quoting
# problems. But gdb_expect really wants to see \r\n in patterns. So
# transform the pattern here. First transform \r\n back to \n, in
# case some users of gdb_test_exact already do the right thing.
regsub -all "\r\n" $pattern "\n" pattern
regsub -all "\n" $pattern "\r\n" pattern
if [llength $args]==3 then {
set message [lindex $args 2]
} else {
set message $command
}
 
return [gdb_test $command $pattern $message]
}
proc gdb_reinitialize_dir { subdir } {
global gdb_prompt
 
if [is_remote host] {
return "";
}
send_gdb "dir\n"
gdb_expect 60 {
-re "Reinitialize source path to empty.*y or n. " {
send_gdb "y\n"
gdb_expect 60 {
-re "Source directories searched.*$gdb_prompt $" {
send_gdb "dir $subdir\n"
gdb_expect 60 {
-re "Source directories searched.*$gdb_prompt $" {
verbose "Dir set to $subdir"
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
-re "$gdb_prompt $" {
perror "Dir \"$subdir\" failed."
}
}
}
 
#
# gdb_exit -- exit the GDB, killing the target program if necessary
#
proc default_gdb_exit {} {
global GDB
global GDBFLAGS
global verbose
global gdb_spawn_id;
 
gdb_stop_suppressing_tests;
 
if ![info exists gdb_spawn_id] {
return;
}
 
verbose "Quitting $GDB $GDBFLAGS"
 
if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "quit\n";
gdb_expect 10 {
-re "y or n" {
send_gdb "y\n";
exp_continue;
}
-re "DOSEXIT code" { }
default { }
}
}
 
if ![is_remote host] {
remote_close host;
}
unset gdb_spawn_id
}
 
# Load a file into the debugger.
# The return value is 0 for success, -1 for failure.
#
# This procedure also set the global variable GDB_FILE_CMD_DEBUG_INFO
# to one of these values:
#
# debug file was loaded successfully and has debug information
# nodebug file was loaded successfully and has no debug information
# fail file was not loaded
#
# I tried returning this information as part of the return value,
# but ran into a mess because of the many re-implementations of
# gdb_load in config/*.exp.
#
# TODO: gdb.base/sepdebug.exp and gdb.stabs/weird.exp might be able to use
# this if they can get more information set.
 
proc gdb_file_cmd { arg } {
global gdb_prompt
global verbose
global GDB
global last_loaded_file
 
set last_loaded_file $arg
 
# Set whether debug info was found.
# Default to "fail".
global gdb_file_cmd_debug_info
set gdb_file_cmd_debug_info "fail"
 
if [is_remote host] {
set arg [remote_download host $arg]
if { $arg == "" } {
perror "download failed"
return -1
}
}
 
# The file command used to kill the remote target. For the benefit
# of the testsuite, preserve this behavior.
send_gdb "kill\n"
gdb_expect 120 {
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "$gdb_prompt $" {
# OK.
}
}
 
send_gdb "file $arg\n"
gdb_expect 120 {
-re "Reading symbols from.*no debugging symbols found.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB with no debugging symbols"
set gdb_file_cmd_debug_info "nodebug"
return 0
}
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg into the $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$gdb_prompt $" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
set gdb_file_cmd_debug_info "debug"
return 0
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
return -1
}
}
}
-re "No such file or directory.*$gdb_prompt $" {
perror "($arg) No such file or directory"
return -1
}
-re "$gdb_prompt $" {
perror "couldn't load $arg into $GDB."
return -1
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
}
 
#
# start gdb -- start gdb running, default procedure
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow. Give gdb at least 3 minutes to start up.
#
proc default_gdb_start { } {
global verbose
global GDB
global GDBFLAGS
global gdb_prompt
global timeout
global gdb_spawn_id;
 
gdb_stop_suppressing_tests;
 
verbose "Spawning $GDB -nw $GDBFLAGS"
 
if [info exists gdb_spawn_id] {
return 0;
}
 
if ![is_remote host] {
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
}
set res [remote_spawn host "$GDB -nw $GDBFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
}
gdb_expect 360 {
-re "\[\r\n\]$gdb_prompt $" {
verbose "GDB initialized."
}
-re "$gdb_prompt $" {
perror "GDB never initialized."
return -1
}
timeout {
perror "(timeout) GDB never initialized after 10 seconds."
remote_close host;
return -1
}
}
set gdb_spawn_id -1;
# force the height to "unlimited", so no pagers get used
 
send_gdb "set height 0\n"
gdb_expect 10 {
-re "$gdb_prompt $" {
verbose "Setting height to 0." 2
}
timeout {
warning "Couldn't set the height to 0"
}
}
# force the width to "unlimited", so no wraparound occurs
send_gdb "set width 0\n"
gdb_expect 10 {
-re "$gdb_prompt $" {
verbose "Setting width to 0." 2
}
timeout {
warning "Couldn't set the width to 0."
}
}
return 0;
}
 
# Return a 1 for configurations for which we don't even want to try to
# test C++.
 
proc skip_cplus_tests {} {
if { [istarget "h8300-*-*"] } {
return 1
}
 
# The C++ IO streams are too large for HC11/HC12 and are thus not
# available. The gdb C++ tests use them and don't compile.
if { [istarget "m6811-*-*"] } {
return 1
}
if { [istarget "m6812-*-*"] } {
return 1
}
return 0
}
 
# Return a 1 if I don't even want to try to test FORTRAN.
 
proc skip_fortran_tests {} {
return 0
}
 
# Return a 1 if we should skip shared library tests.
 
proc skip_shlib_tests {} {
# Run the shared library tests on native systems.
if {[isnative]} {
return 0
}
 
# An abbreviated list of remote targets where we should be able to
# run shared library tests.
if {([istarget *-*-linux*]
|| [istarget *-*-*bsd*]
|| [istarget *-*-solaris2*]
|| [istarget arm*-*-symbianelf*]
|| [istarget *-*-mingw*]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
return 0
}
 
return 1
}
 
# Run a test on the target to see if it supports vmx hardware. Return 0 if so,
# 1 if it does not. Based on 'check_vmx_hw_available' from the GCC testsuite.
 
proc skip_altivec_tests {} {
global skip_vmx_tests_saved
global srcdir subdir gdb_prompt
 
# Use the cached value, if it exists.
set me "skip_altivec_tests"
if [info exists skip_vmx_tests_saved] {
verbose "$me: returning saved $skip_vmx_tests_saved" 2
return $skip_vmx_tests_saved
}
 
# Some simulators are known to not support VMX instructions.
if { [istarget powerpc-*-eabi] || [istarget powerpc*-*-eabispe] } {
verbose "$me: target known to not support VMX, returning 1" 2
return [set skip_vmx_tests_saved 1]
}
 
# Make sure we have a compiler that understands altivec.
set compile_flags {debug nowarnings}
if [get_compiler_info not-used] {
warning "Could not get compiler info"
return 1
}
if [test_compiler_info gcc*] {
set compile_flags "$compile_flags additional_flags=-maltivec"
} elseif [test_compiler_info xlc*] {
set compile_flags "$compile_flags additional_flags=-qaltivec"
} else {
verbose "Could not compile with altivec support, returning 1" 2
return 1
}
 
# Set up, compile, and execute a test program containing VMX instructions.
# Include the current process ID in the file names to prevent conflicts
# with invocations for multiple testsuites.
set src vmx[pid].c
set exe vmx[pid].x
 
set f [open $src "w"]
puts $f "int main() {"
puts $f "#ifdef __MACH__"
puts $f " asm volatile (\"vor v0,v0,v0\");"
puts $f "#else"
puts $f " asm volatile (\"vor 0,0,0\");"
puts $f "#endif"
puts $f " return 0; }"
close $f
 
verbose "$me: compiling testfile $src" 2
set lines [gdb_compile $src $exe executable $compile_flags]
file delete $src
 
if ![string match "" $lines] then {
verbose "$me: testfile compilation failed, returning 1" 2
return [set skip_vmx_tests_saved 1]
}
 
# No error message, compilation succeeded so now run it via gdb.
 
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load "$exe"
gdb_run_cmd
gdb_expect {
-re ".*Illegal instruction.*${gdb_prompt} $" {
verbose -log "\n$me altivec hardware not detected"
set skip_vmx_tests_saved 1
}
-re ".*Program exited normally.*${gdb_prompt} $" {
verbose -log "\n$me: altivec hardware detected"
set skip_vmx_tests_saved 0
}
default {
warning "\n$me: default case taken"
set skip_vmx_tests_saved 1
}
}
gdb_exit
remote_file build delete $exe
 
verbose "$me: returning $skip_vmx_tests_saved" 2
return $skip_vmx_tests_saved
}
 
# Skip all the tests in the file if you are not on an hppa running
# hpux target.
 
proc skip_hp_tests {} {
eval set skip_hp [ expr ![isnative] || ![istarget "hppa*-*-hpux*"] ]
verbose "Skip hp tests is $skip_hp"
return $skip_hp
}
 
set compiler_info "unknown"
set gcc_compiled 0
set hp_cc_compiler 0
set hp_aCC_compiler 0
 
# Figure out what compiler I am using.
#
# BINFILE is a "compiler information" output file. This implementation
# does not use BINFILE.
#
# ARGS can be empty or "C++". If empty, "C" is assumed.
#
# There are several ways to do this, with various problems.
#
# [ gdb_compile -E $ifile -o $binfile.ci ]
# source $binfile.ci
#
# Single Unix Spec v3 says that "-E -o ..." together are not
# specified. And in fact, the native compiler on hp-ux 11 (among
# others) does not work with "-E -o ...". Most targets used to do
# this, and it mostly worked, because it works with gcc.
#
# [ catch "exec $compiler -E $ifile > $binfile.ci" exec_output ]
# source $binfile.ci
#
# This avoids the problem with -E and -o together. This almost works
# if the build machine is the same as the host machine, which is
# usually true of the targets which are not gcc. But this code does
# not figure which compiler to call, and it always ends up using the C
# compiler. Not good for setting hp_aCC_compiler. Targets
# hppa*-*-hpux* and mips*-*-irix* used to do this.
#
# [ gdb_compile -E $ifile > $binfile.ci ]
# source $binfile.ci
#
# dejagnu target_compile says that it supports output redirection,
# but the code is completely different from the normal path and I
# don't want to sweep the mines from that path. So I didn't even try
# this.
#
# set cppout [ gdb_compile $ifile "" preprocess $args quiet ]
# eval $cppout
#
# I actually do this for all targets now. gdb_compile runs the right
# compiler, and TCL captures the output, and I eval the output.
#
# Unfortunately, expect logs the output of the command as it goes by,
# and dejagnu helpfully prints a second copy of it right afterwards.
# So I turn off expect logging for a moment.
#
# [ gdb_compile $ifile $ciexe_file executable $args ]
# [ remote_exec $ciexe_file ]
# [ source $ci_file.out ]
#
# I could give up on -E and just do this.
# I didn't get desperate enough to try this.
#
# -- chastain 2004-01-06
 
proc get_compiler_info {binfile args} {
# For compiler.c and compiler.cc
global srcdir
 
# I am going to play with the log to keep noise out.
global outdir
global tool
 
# These come from compiler.c or compiler.cc
global compiler_info
 
# Legacy global data symbols.
global gcc_compiled
global hp_cc_compiler
global hp_aCC_compiler
 
# Choose which file to preprocess.
set ifile "${srcdir}/lib/compiler.c"
if { [llength $args] > 0 && [lindex $args 0] == "c++" } {
set ifile "${srcdir}/lib/compiler.cc"
}
 
# Run $ifile through the right preprocessor.
# Toggle gdb.log to keep the compiler output out of the log.
log_file
set cppout [ gdb_compile "${ifile}" "" preprocess [list "$args" quiet] ]
log_file -a "$outdir/$tool.log"
 
# Eval the output.
set unknown 0
foreach cppline [ split "$cppout" "\n" ] {
if { [ regexp "^#" "$cppline" ] } {
# line marker
} elseif { [ regexp "^\[\n\r\t \]*$" "$cppline" ] } {
# blank line
} elseif { [ regexp "^\[\n\r\t \]*set\[\n\r\t \]" "$cppline" ] } {
# eval this line
verbose "get_compiler_info: $cppline" 2
eval "$cppline"
} else {
# unknown line
verbose -log "get_compiler_info: $cppline"
set unknown 1
}
}
 
# Reset to unknown compiler if any diagnostics happened.
if { $unknown } {
set compiler_info "unknown"
}
 
# Set the legacy symbols.
set gcc_compiled 0
set hp_cc_compiler 0
set hp_aCC_compiler 0
if { [regexp "^gcc-1-" "$compiler_info" ] } { set gcc_compiled 1 }
if { [regexp "^gcc-2-" "$compiler_info" ] } { set gcc_compiled 2 }
if { [regexp "^gcc-3-" "$compiler_info" ] } { set gcc_compiled 3 }
if { [regexp "^gcc-4-" "$compiler_info" ] } { set gcc_compiled 4 }
if { [regexp "^gcc-5-" "$compiler_info" ] } { set gcc_compiled 5 }
if { [regexp "^hpcc-" "$compiler_info" ] } { set hp_cc_compiler 1 }
if { [regexp "^hpacc-" "$compiler_info" ] } { set hp_aCC_compiler 1 }
 
# Log what happened.
verbose -log "get_compiler_info: $compiler_info"
 
# Most compilers will evaluate comparisons and other boolean
# operations to 0 or 1.
uplevel \#0 { set true 1 }
uplevel \#0 { set false 0 }
 
# Use of aCC results in boolean results being displayed as
# "true" or "false"
if { $hp_aCC_compiler } {
uplevel \#0 { set true true }
uplevel \#0 { set false false }
}
 
return 0;
}
 
proc test_compiler_info { {compiler ""} } {
global compiler_info
 
# if no arg, return the compiler_info string
 
if [string match "" $compiler] {
if [info exists compiler_info] {
return $compiler_info
} else {
perror "No compiler info found."
}
}
 
return [string match $compiler $compiler_info]
}
 
set gdb_wrapper_initialized 0
 
proc gdb_wrapper_init { args } {
global gdb_wrapper_initialized;
global gdb_wrapper_file;
global gdb_wrapper_flags;
 
if { $gdb_wrapper_initialized == 1 } { return; }
 
if {[target_info exists needs_status_wrapper] && \
[target_info needs_status_wrapper] != "0"} {
set result [build_wrapper "testglue.o"];
if { $result != "" } {
set gdb_wrapper_file [lindex $result 0];
set gdb_wrapper_flags [lindex $result 1];
} else {
warning "Status wrapper failed to build."
}
}
set gdb_wrapper_initialized 1
}
 
proc gdb_compile {source dest type options} {
global GDB_TESTCASE_OPTIONS;
global gdb_wrapper_file;
global gdb_wrapper_flags;
global gdb_wrapper_initialized;
 
set outdir [file dirname $dest]
 
# Add platform-specific options if a shared library was specified using
# "shlib=librarypath" in OPTIONS.
set new_options ""
set shlib_found 0
foreach opt $options {
if [regexp {^shlib=(.*)} $opt dummy_var shlib_name] {
if [test_compiler_info "xlc-*"] {
# IBM xlc compiler doesn't accept shared library named other
# than .so: use "-Wl," to bypass this
lappend source "-Wl,$shlib_name"
} elseif { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend source "${shlib_name}.a"
} else {
lappend source $shlib_name
}
if {$shlib_found == 0} {
set shlib_found 1
if { ([test_compiler_info "gcc-*"]
&& ([istarget "powerpc*-*-aix*"]
|| [istarget "rs6000*-*-aix*"] )) } {
lappend options "additional_flags=-L${outdir}"
} elseif { [istarget "mips-sgi-irix*"] } {
lappend options "additional_flags=-rpath ${outdir}"
}
}
} elseif { $opt == "shlib_load" } {
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*]
|| [istarget arm*-*-symbianelf*]
|| [istarget hppa*-*-hpux*])} {
# Do not need anything.
} elseif { [istarget *-*-openbsd*] } {
lappend new_options "additional_flags=-Wl,-rpath,${outdir}"
} else {
lappend new_options "libs=-ldl"
lappend new_options "additional_flags=-Wl,-rpath,\\\$ORIGIN"
}
} else {
lappend new_options $opt
}
}
set options $new_options
 
if [target_info exists gdb_stub] {
set options2 { "additional_flags=-Dusestubs" }
lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [target_info exists is_vxworks] {
set options2 { "additional_flags=-Dvxworks" }
lappend options "libs=[target_info gdb_stub]";
set options [concat $options2 $options]
}
if [info exists GDB_TESTCASE_OPTIONS] {
lappend options "additional_flags=$GDB_TESTCASE_OPTIONS";
}
verbose "options are $options"
verbose "source is $source $dest $type $options"
 
if { $gdb_wrapper_initialized == 0 } { gdb_wrapper_init }
 
if {[target_info exists needs_status_wrapper] && \
[target_info needs_status_wrapper] != "0" && \
[info exists gdb_wrapper_file]} {
lappend options "libs=${gdb_wrapper_file}"
lappend options "ldflags=${gdb_wrapper_flags}"
}
 
# Replace the "nowarnings" option with the appropriate additional_flags
# to disable compiler warnings.
set nowarnings [lsearch -exact $options nowarnings]
if {$nowarnings != -1} {
if [target_info exists gdb,nowarnings_flag] {
set flag "additional_flags=[target_info gdb,nowarnings_flag]"
} else {
set flag "additional_flags=-w"
}
set options [lreplace $options $nowarnings $nowarnings $flag]
}
 
set result [target_compile $source $dest $type $options];
 
# Prune uninteresting compiler (and linker) output.
regsub "Creating library file: \[^\r\n\]*\[\r\n\]+" $result "" result
 
regsub "\[\r\n\]*$" "$result" "" result;
regsub "^\[\r\n\]*" "$result" "" result;
 
if { $result != "" && [lsearch $options quiet] == -1} {
clone_output "gdb compile failed, $result"
}
return $result;
}
 
 
# This is just like gdb_compile, above, except that it tries compiling
# against several different thread libraries, to see which one this
# system has.
proc gdb_compile_pthreads {source dest type options} {
set built_binfile 0
set why_msg "unrecognized error"
foreach lib {-lpthreads -lpthread -lthread} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
set options_with_lib [concat $options [list libs=$lib quiet]]
set ccout [gdb_compile $source $dest $type $options_with_lib]
switch -regexp -- $ccout {
".*no posix threads support.*" {
set why_msg "missing threads include file"
break
}
".*cannot open -lpthread.*" {
set why_msg "missing runtime threads library"
}
".*Can't find library for -lpthread.*" {
set why_msg "missing runtime threads library"
}
{^$} {
pass "successfully compiled posix threads test case"
set built_binfile 1
break
}
}
}
if {!$built_binfile} {
unsupported "Couldn't compile $source: ${why_msg}"
return -1
}
}
 
# Build a shared library from SOURCES. You must use get_compiler_info
# first.
 
proc gdb_compile_shlib {sources dest options} {
set obj_options $options
 
switch -glob [test_compiler_info] {
"xlc-*" {
lappend obj_options "additional_flags=-qpic"
}
"gcc-*" {
if { !([istarget "powerpc*-*-aix*"]
|| [istarget "rs6000*-*-aix*"]
|| [istarget "*-*-cygwin*"]
|| [istarget "*-*-mingw*"]
|| [istarget "*-*-pe*"]) } {
lappend obj_options "additional_flags=-fpic"
}
}
default {
switch -glob [istarget] {
"hppa*-hp-hpux*" {
lappend obj_options "additional_flags=+z"
}
"mips-sgi-irix*" {
# Disable SGI compiler's implicit -Dsgi
lappend obj_options "additional_flags=-Usgi"
}
default {
# don't know what the compiler is...
}
}
}
}
 
set outdir [file dirname $dest]
set objects ""
foreach source $sources {
set sourcebase [file tail $source]
if {[gdb_compile $source "${outdir}/${sourcebase}.o" object $obj_options] != ""} {
return -1
}
lappend objects ${outdir}/${sourcebase}.o
}
 
if [istarget "hppa*-*-hpux*"] {
remote_exec build "ld -b ${objects} -o ${dest}"
} else {
set link_options $options
if [test_compiler_info "xlc-*"] {
lappend link_options "additional_flags=-qmkshrobj"
} else {
lappend link_options "additional_flags=-shared"
 
if { ([istarget "*-*-mingw*"]
|| [istarget *-*-cygwin*]
|| [istarget *-*-pe*])} {
lappend link_options "additional_flags=-Wl,--out-implib,${dest}.a"
}
}
if {[gdb_compile "${objects}" "${dest}" executable $link_options] != ""} {
return -1
}
}
}
 
# This is just like gdb_compile_pthreads, above, except that we always add the
# objc library for compiling Objective-C programs
proc gdb_compile_objc {source dest type options} {
set built_binfile 0
set why_msg "unrecognized error"
foreach lib {-lobjc -lpthreads -lpthread -lthread solaris} {
# This kind of wipes out whatever libs the caller may have
# set. Or maybe theirs will override ours. How infelicitous.
if { $lib == "solaris" } {
set lib "-lpthread -lposix4"
}
if { $lib != "-lobjc" } {
set lib "-lobjc $lib"
}
set options_with_lib [concat $options [list libs=$lib quiet]]
set ccout [gdb_compile $source $dest $type $options_with_lib]
switch -regexp -- $ccout {
".*no posix threads support.*" {
set why_msg "missing threads include file"
break
}
".*cannot open -lpthread.*" {
set why_msg "missing runtime threads library"
}
".*Can't find library for -lpthread.*" {
set why_msg "missing runtime threads library"
}
{^$} {
pass "successfully compiled objc with posix threads test case"
set built_binfile 1
break
}
}
}
if {!$built_binfile} {
unsupported "Couldn't compile $source: ${why_msg}"
return -1
}
}
 
proc send_gdb { string } {
global suppress_flag;
if { $suppress_flag } {
return "suppressed";
}
return [remote_send host "$string"];
}
 
#
#
 
proc gdb_expect { args } {
if { [llength $args] == 2 && [lindex $args 0] != "-re" } {
set gtimeout [lindex $args 0];
set expcode [list [lindex $args 1]];
} else {
upvar timeout timeout;
 
set expcode $args;
if [target_info exists gdb,timeout] {
if [info exists timeout] {
if { $timeout < [target_info gdb,timeout] } {
set gtimeout [target_info gdb,timeout];
} else {
set gtimeout $timeout;
}
} else {
set gtimeout [target_info gdb,timeout];
}
}
 
if ![info exists gtimeout] {
global timeout;
if [info exists timeout] {
set gtimeout $timeout;
} else {
# Eeeeew.
set gtimeout 60;
}
}
}
global suppress_flag;
global remote_suppress_flag;
if [info exists remote_suppress_flag] {
set old_val $remote_suppress_flag;
}
if [info exists suppress_flag] {
if { $suppress_flag } {
set remote_suppress_flag 1;
}
}
set code [catch \
{uplevel remote_expect host $gtimeout $expcode} string];
if [info exists old_val] {
set remote_suppress_flag $old_val;
} else {
if [info exists remote_suppress_flag] {
unset remote_suppress_flag;
}
}
 
if {$code == 1} {
global errorInfo errorCode;
 
return -code error -errorinfo $errorInfo -errorcode $errorCode $string
} elseif {$code == 2} {
return -code return $string
} elseif {$code == 3} {
return
} elseif {$code > 4} {
return -code $code $string
}
}
 
# gdb_expect_list MESSAGE SENTINEL LIST -- expect a sequence of outputs
#
# Check for long sequence of output by parts.
# MESSAGE: is the test message to be printed with the test success/fail.
# SENTINEL: Is the terminal pattern indicating that output has finished.
# LIST: is the sequence of outputs to match.
# If the sentinel is recognized early, it is considered an error.
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc gdb_expect_list {test sentinel list} {
global gdb_prompt
global suppress_flag
set index 0
set ok 1
if { $suppress_flag } {
set ok 0
unresolved "${test}"
}
while { ${index} < [llength ${list}] } {
set pattern [lindex ${list} ${index}]
set index [expr ${index} + 1]
if { ${index} == [llength ${list}] } {
if { ${ok} } {
gdb_expect {
-re "${pattern}${sentinel}" {
# pass "${test}, pattern ${index} + sentinel"
}
-re "${sentinel}" {
fail "${test} (pattern ${index} + sentinel)"
set ok 0
}
-re ".*A problem internal to GDB has been detected" {
fail "${test} (GDB internal error)"
set ok 0
gdb_internal_error_resync
}
timeout {
fail "${test} (pattern ${index} + sentinel) (timeout)"
set ok 0
}
}
} else {
# unresolved "${test}, pattern ${index} + sentinel"
}
} else {
if { ${ok} } {
gdb_expect {
-re "${pattern}" {
# pass "${test}, pattern ${index}"
}
-re "${sentinel}" {
fail "${test} (pattern ${index})"
set ok 0
}
-re ".*A problem internal to GDB has been detected" {
fail "${test} (GDB internal error)"
set ok 0
gdb_internal_error_resync
}
timeout {
fail "${test} (pattern ${index}) (timeout)"
set ok 0
}
}
} else {
# unresolved "${test}, pattern ${index}"
}
}
}
if { ${ok} } {
pass "${test}"
return 0
} else {
return 1
}
}
 
#
#
proc gdb_suppress_entire_file { reason } {
global suppress_flag;
 
warning "$reason\n";
set suppress_flag -1;
}
 
#
# Set suppress_flag, which will cause all subsequent calls to send_gdb and
# gdb_expect to fail immediately (until the next call to
# gdb_stop_suppressing_tests).
#
proc gdb_suppress_tests { args } {
global suppress_flag;
 
return; # fnf - disable pending review of results where
# testsuite ran better without this
incr suppress_flag;
 
if { $suppress_flag == 1 } {
if { [llength $args] > 0 } {
warning "[lindex $args 0]\n";
} else {
warning "Because of previous failure, all subsequent tests in this group will automatically fail.\n";
}
}
}
 
#
# Clear suppress_flag.
#
proc gdb_stop_suppressing_tests { } {
global suppress_flag;
 
if [info exists suppress_flag] {
if { $suppress_flag > 0 } {
set suppress_flag 0;
clone_output "Tests restarted.\n";
}
} else {
set suppress_flag 0;
}
}
 
proc gdb_clear_suppressed { } {
global suppress_flag;
 
set suppress_flag 0;
}
 
proc gdb_start { } {
default_gdb_start
}
 
proc gdb_exit { } {
catch default_gdb_exit
}
 
#
# gdb_load_cmd -- load a file into the debugger.
# ARGS - additional args to load command.
# return a -1 if anything goes wrong.
#
proc gdb_load_cmd { args } {
global gdb_prompt
 
if [target_info exists gdb_load_timeout] {
set loadtimeout [target_info gdb_load_timeout]
} else {
set loadtimeout 1600
}
send_gdb "load $args\n"
verbose "Timeout is now $loadtimeout seconds" 2
gdb_expect $loadtimeout {
-re "Loading section\[^\r\]*\r\n" {
exp_continue
}
-re "Start address\[\r\]*\r\n" {
exp_continue
}
-re "Transfer rate\[\r\]*\r\n" {
exp_continue
}
-re "Memory access error\[^\r\]*\r\n" {
perror "Failed to load program"
return -1
}
-re "$gdb_prompt $" {
return 0
}
-re "(.*)\r\n$gdb_prompt " {
perror "Unexpected reponse from 'load' -- $expect_out(1,string)"
return -1
}
timeout {
perror "Timed out trying to load $arg."
return -1
}
}
return -1
}
 
# gdb_download
#
# Copy a file to the remote target and return its target filename.
# Schedule the file to be deleted at the end of this test.
 
proc gdb_download { filename } {
global cleanfiles
 
set destname [remote_download target $filename]
lappend cleanfiles $destname
return $destname
}
 
# gdb_load_shlibs LIB...
#
# Copy the listed libraries to the target.
 
proc gdb_load_shlibs { args } {
if {![is_remote target]} {
return
}
 
foreach file $args {
gdb_download $file
}
 
# Even if the target supplies full paths for shared libraries,
# they may not be paths for this system.
gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "" ""
}
 
#
# gdb_load -- load a file into the debugger.
# Many files in config/*.exp override this procedure.
#
proc gdb_load { arg } {
return [gdb_file_cmd $arg]
}
 
# gdb_reload -- load a file into the target. Called before "running",
# either the first time or after already starting the program once,
# for remote targets. Most files that override gdb_load should now
# override this instead.
 
proc gdb_reload { } {
# For the benefit of existing configurations, default to gdb_load.
# Specifying no file defaults to the executable currently being
# debugged.
return [gdb_load ""]
}
 
proc gdb_continue { function } {
global decimal
 
return [gdb_test "continue" ".*Breakpoint $decimal, $function .*" "continue to $function"];
}
 
proc default_gdb_init { args } {
global gdb_wrapper_initialized
global cleanfiles
set cleanfiles {}
 
gdb_clear_suppressed;
 
# Make sure that the wrapper is rebuilt
# with the appropriate multilib option.
set gdb_wrapper_initialized 0
# Unlike most tests, we have a small number of tests that generate
# a very large amount of output. We therefore increase the expect
# buffer size to be able to contain the entire test output.
match_max -d 30000
 
# We want to add the name of the TCL testcase to the PASS/FAIL messages.
if { [llength $args] > 0 } {
global pf_prefix
 
set file [lindex $args 0];
 
set pf_prefix "[file tail [file dirname $file]]/[file tail $file]:";
}
global gdb_prompt;
if [target_info exists gdb_prompt] {
set gdb_prompt [target_info gdb_prompt];
} else {
set gdb_prompt "\\(gdb\\)"
}
}
 
proc gdb_init { args } {
return [eval default_gdb_init $args];
}
 
proc gdb_finish { } {
global cleanfiles
 
# Exit first, so that the files are no longer in use.
gdb_exit
 
if { [llength $cleanfiles] > 0 } {
eval remote_file target delete $cleanfiles
set cleanfiles {}
}
}
 
global debug_format
set debug_format "unknown"
 
# Run the gdb command "info source" and extract the debugging format
# information from the output and save it in debug_format.
 
proc get_debug_format { } {
global gdb_prompt
global verbose
global expect_out
global debug_format
 
set debug_format "unknown"
send_gdb "info source\n"
gdb_expect 10 {
-re "Compiled with (.*) debugging format.\r\n.*$gdb_prompt $" {
set debug_format $expect_out(1,string)
verbose "debug format is $debug_format"
return 1;
}
-re "No current source file.\r\n$gdb_prompt $" {
perror "get_debug_format used when no current source file"
return 0;
}
-re "$gdb_prompt $" {
warning "couldn't check debug format (no valid response)."
return 1;
}
timeout {
warning "couldn't check debug format (timed out)."
return 1;
}
}
}
 
# Return true if FORMAT matches the debug format the current test was
# compiled with. FORMAT is a shell-style globbing pattern; it can use
# `*', `[...]', and so on.
#
# This function depends on variables set by `get_debug_format', above.
 
proc test_debug_format {format} {
global debug_format
 
return [expr [string match $format $debug_format] != 0]
}
 
# Like setup_xfail, but takes the name of a debug format (DWARF 1,
# COFF, stabs, etc). If that format matches the format that the
# current test was compiled with, then the next test is expected to
# fail for any target. Returns 1 if the next test or set of tests is
# expected to fail, 0 otherwise (or if it is unknown). Must have
# previously called get_debug_format.
proc setup_xfail_format { format } {
set ret [test_debug_format $format];
 
if {$ret} then {
setup_xfail "*-*-*"
}
return $ret;
}
 
proc gdb_step_for_stub { } {
global gdb_prompt;
 
if ![target_info exists gdb,use_breakpoint_for_stub] {
if [target_info exists gdb_stub_step_command] {
set command [target_info gdb_stub_step_command];
} else {
set command "step";
}
send_gdb "${command}\n";
set tries 0;
gdb_expect 60 {
-re "(main.* at |.*in .*start).*$gdb_prompt" {
return;
}
-re ".*$gdb_prompt" {
incr tries;
if { $tries == 5 } {
fail "stepping out of breakpoint function";
return;
}
send_gdb "${command}\n";
exp_continue;
}
default {
fail "stepping out of breakpoint function";
return;
}
}
}
send_gdb "where\n";
gdb_expect {
-re "main\[^\r\n\]*at \(\[^:]+\):\(\[0-9\]+\)" {
set file $expect_out(1,string);
set linenum [expr $expect_out(2,string) + 1];
set breakplace "${file}:${linenum}";
}
default {}
}
send_gdb "break ${breakplace}\n";
gdb_expect 60 {
-re "Breakpoint (\[0-9\]+) at.*$gdb_prompt" {
set breakpoint $expect_out(1,string);
}
-re "Breakpoint (\[0-9\]+): file.*$gdb_prompt" {
set breakpoint $expect_out(1,string);
}
default {}
}
send_gdb "continue\n";
gdb_expect 60 {
-re "Breakpoint ${breakpoint},.*$gdb_prompt" {
gdb_test "delete $breakpoint" ".*" "";
return;
}
default {}
}
}
 
# gdb_get_line_number TEXT [FILE]
#
# Search the source file FILE, and return the line number of the
# first line containing TEXT. If no match is found, return -1.
#
# TEXT is a string literal, not a regular expression.
#
# The default value of FILE is "$srcdir/$subdir/$srcfile". If FILE is
# specified, and does not start with "/", then it is assumed to be in
# "$srcdir/$subdir". This is awkward, and can be fixed in the future,
# by changing the callers and the interface at the same time.
# In particular: gdb.base/break.exp, gdb.base/condbreak.exp,
# gdb.base/ena-dis-br.exp.
#
# Use this function to keep your test scripts independent of the
# exact line numbering of the source file. Don't write:
#
# send_gdb "break 20"
#
# This means that if anyone ever edits your test's source file,
# your test could break. Instead, put a comment like this on the
# source file line you want to break at:
#
# /* breakpoint spot: frotz.exp: test name */
#
# and then write, in your test script (which we assume is named
# frotz.exp):
#
# send_gdb "break [gdb_get_line_number "frotz.exp: test name"]\n"
#
# (Yes, Tcl knows how to handle the nested quotes and brackets.
# Try this:
# $ tclsh
# % puts "foo [lindex "bar baz" 1]"
# foo baz
# %
# Tcl is quite clever, for a little stringy language.)
#
# ===
#
# The previous implementation of this procedure used the gdb search command.
# This version is different:
#
# . It works with MI, and it also works when gdb is not running.
#
# . It operates on the build machine, not the host machine.
#
# . For now, this implementation fakes a current directory of
# $srcdir/$subdir to be compatible with the old implementation.
# This will go away eventually and some callers will need to
# be changed.
#
# . The TEXT argument is literal text and matches literally,
# not a regular expression as it was before.
#
# . State changes in gdb, such as changing the current file
# and setting $_, no longer happen.
#
# After a bit of time we can forget about the differences from the
# old implementation.
#
# --chastain 2004-08-05
 
proc gdb_get_line_number { text { file "" } } {
global srcdir
global subdir
global srcfile
 
if { "$file" == "" } then {
set file "$srcfile"
}
if { ! [regexp "^/" "$file"] } then {
set file "$srcdir/$subdir/$file"
}
 
if { [ catch { set fd [open "$file"] } message ] } then {
perror "$message"
return -1
}
 
set found -1
for { set line 1 } { 1 } { incr line } {
if { [ catch { set nchar [gets "$fd" body] } message ] } then {
perror "$message"
return -1
}
if { $nchar < 0 } then {
break
}
if { [string first "$text" "$body"] >= 0 } then {
set found $line
break
}
}
 
if { [ catch { close "$fd" } message ] } then {
perror "$message"
return -1
}
 
return $found
}
 
# gdb_continue_to_end:
# The case where the target uses stubs has to be handled specially. If a
# stub is used, we set a breakpoint at exit because we cannot rely on
# exit() behavior of a remote target.
#
# mssg is the error message that gets printed.
 
proc gdb_continue_to_end {mssg} {
if [target_info exists use_gdb_stub] {
if {![gdb_breakpoint "exit"]} {
return 0
}
gdb_test "continue" "Continuing..*Breakpoint .*exit.*" \
"continue until exit at $mssg"
} else {
# Continue until we exit. Should not stop again.
# Don't bother to check the output of the program, that may be
# extremely tough for some remote systems.
gdb_test "continue"\
"Continuing.\[\r\n0-9\]+(... EXIT code 0\[\r\n\]+|Program exited normally\\.).*"\
"continue until exit at $mssg"
}
}
 
proc rerun_to_main {} {
global gdb_prompt
 
if [target_info exists use_gdb_stub] {
gdb_run_cmd
gdb_expect {
-re ".*Breakpoint .*main .*$gdb_prompt $"\
{pass "rerun to main" ; return 0}
-re "$gdb_prompt $"\
{fail "rerun to main" ; return 0}
timeout {fail "(timeout) rerun to main" ; return 0}
}
} else {
send_gdb "run\n"
gdb_expect {
-re "The program .* has been started already.*y or n. $" {
send_gdb "y\n"
exp_continue
}
-re "Starting program.*$gdb_prompt $"\
{pass "rerun to main" ; return 0}
-re "$gdb_prompt $"\
{fail "rerun to main" ; return 0}
timeout {fail "(timeout) rerun to main" ; return 0}
}
}
}
 
# Print a message and return true if a test should be skipped
# due to lack of floating point suport.
 
proc gdb_skip_float_test { msg } {
if [target_info exists gdb,skip_float_tests] {
verbose "Skipping test '$msg': no float tests.";
return 1;
}
return 0;
}
 
# Print a message and return true if a test should be skipped
# due to lack of stdio support.
 
proc gdb_skip_stdio_test { msg } {
if [target_info exists gdb,noinferiorio] {
verbose "Skipping test '$msg': no inferior i/o.";
return 1;
}
return 0;
}
 
proc gdb_skip_bogus_test { msg } {
return 0;
}
 
# Return true if a test should be skipped due to lack of XML support
# in the host GDB.
 
proc gdb_skip_xml_test { } {
global gdb_prompt
global srcdir
global xml_missing_cached
 
if {[info exists xml_missing_cached]} {
return $xml_missing_cached
}
 
gdb_start
set xml_missing_cached 0
gdb_test_multiple "set tdesc filename ${srcdir}/gdb.xml/trivial.xml" "" {
-re ".*XML support was disabled at compile time.*$gdb_prompt $" {
set xml_missing_cached 1
}
-re ".*$gdb_prompt $" { }
}
gdb_exit
return $xml_missing_cached
}
 
# Note: the procedure gdb_gnu_strip_debug will produce an executable called
# ${binfile}.dbglnk, which is just like the executable ($binfile) but without
# the debuginfo. Instead $binfile has a .gnu_debuglink section which contains
# the name of a debuginfo only file. This file will be stored in the
# gdb.base/.debug subdirectory.
 
# Functions for separate debug info testing
 
# starting with an executable:
# foo --> original executable
 
# at the end of the process we have:
# foo.stripped --> foo w/o debug info
# .debug/foo.debug --> foo's debug info
# foo --> like foo, but with a new .gnu_debuglink section pointing to foo.debug.
 
# Return the name of the file in which we should stor EXEC's separated
# debug info. EXEC contains the full path.
proc separate_debug_filename { exec } {
 
# In a .debug subdirectory off the same directory where the testcase
# executable is going to be. Something like:
# <your-path>/gdb/testsuite/gdb.base/.debug/blah.debug.
# This is the default location where gdb expects to findi
# the debug info file.
 
set exec_dir [file dirname $exec]
set exec_file [file tail $exec]
set debug_dir [file join $exec_dir ".debug"]
set debug_file [file join $debug_dir "${exec_file}.debug"]
 
return $debug_file
}
 
# Return the build-id hex string (usually 160 bits as 40 hex characters)
# converted to the form: .build-id/ab/cdef1234...89.debug
# Return "" if no build-id found.
proc build_id_debug_filename_get { exec } {
set tmp "${exec}-tmp"
set objcopy_program [transform objcopy]
 
set result [catch "exec $objcopy_program -j .note.gnu.build-id -O binary $exec $tmp" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return ""
}
set fi [open $tmp]
fconfigure $fi -translation binary
# Skip the NOTE header.
read $fi 16
set data [read $fi]
close $fi
file delete $tmp
if ![string compare $data ""] then {
return ""
}
# Convert it to hex.
binary scan $data H* data
set data [regsub {^..} $data {\0/}]
return ".build-id/${data}.debug";
}
 
# Create stripped files for DEST, replacing it. If ARGS is passed, it is a
# list of optional flags. The only currently supported flag is no-main,
# which removes the symbol entry for main from the separate debug file.
 
proc gdb_gnu_strip_debug { dest args } {
 
set debug_file [separate_debug_filename $dest]
set strip_to_file_program [transform strip]
set objcopy_program [transform objcopy]
 
# Make sure the directory that will hold the separated debug
# info actually exists.
set debug_dir [file dirname $debug_file]
if {! [file isdirectory $debug_dir]} {
file mkdir $debug_dir
}
 
set debug_link [file tail $debug_file]
set stripped_file "${dest}.stripped"
 
# Get rid of the debug info, and store result in stripped_file
# something like gdb/testsuite/gdb.base/blah.stripped.
set result [catch "exec $strip_to_file_program --strip-debug ${dest} -o ${stripped_file}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
 
# Get rid of everything but the debug info, and store result in debug_file
# This will be in the .debug subdirectory, see above.
set result [catch "exec $strip_to_file_program --only-keep-debug ${dest} -o ${debug_file}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
 
# If no-main is passed, strip the symbol for main from the separate
# file. This is to simulate the behavior of elfutils's eu-strip, which
# leaves the symtab in the original file only. There's no way to get
# objcopy or strip to remove the symbol table without also removing the
# debugging sections, so this is as close as we can get.
if { [llength $args] == 1 && [lindex $args 0] == "no-main" } {
set result [catch "exec $objcopy_program -N main ${debug_file} ${debug_file}-tmp" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
file delete "${debug_file}"
file rename "${debug_file}-tmp" "${debug_file}"
}
 
# Link the two previous output files together, adding the .gnu_debuglink
# section to the stripped_file, containing a pointer to the debug_file,
# save the new file in dest.
# This will be the regular executable filename, in the usual location.
set result [catch "exec $objcopy_program --add-gnu-debuglink=${debug_file} ${stripped_file} ${dest}" output]
verbose "result is $result"
verbose "output is $output"
if {$result == 1} {
return 1
}
 
return 0
}
 
# Test the output of GDB_COMMAND matches the pattern obtained
# by concatenating all elements of EXPECTED_LINES. This makes
# it possible to split otherwise very long string into pieces.
# If third argument is not empty, it's used as the name of the
# test to be printed on pass/fail.
proc help_test_raw { gdb_command expected_lines args } {
set message $gdb_command
if [llength $args]>0 then {
set message [lindex $args 0]
}
set expected_output [join $expected_lines ""]
gdb_test "${gdb_command}" "${expected_output}" $message
}
 
# Test the output of "help COMMNAD_CLASS". EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of commands in that class. The presence of
# command list and standard epilogue will be tested automatically.
proc test_class_help { command_class expected_initial_lines args } {
set l_stock_body {
"List of commands\:.*\[\r\n\]+"
"Type \"help\" followed by command name for full documentation\.\[\r\n\]+"
"Type \"apropos word\" to search for commands related to \"word\"\.[\r\n\]+"
"Command name abbreviations are allowed if unambiguous\."
}
set l_entire_body [concat $expected_initial_lines $l_stock_body]
 
eval [list help_test_raw "help ${command_class}" $l_entire_body] $args
}
 
# COMMAND_LIST should have either one element -- command to test, or
# two elements -- abbreviated command to test, and full command the first
# element is abbreviation of.
# The command must be a prefix command. EXPECTED_INITIAL_LINES
# are regular expressions that should match the beginning of output,
# before the list of subcommands. The presence of
# subcommand list and standard epilogue will be tested automatically.
proc test_prefix_command_help { command_list expected_initial_lines args } {
set command [lindex $command_list 0]
if {[llength $command_list]>1} {
set full_command [lindex $command_list 1]
} else {
set full_command $command
}
# Use 'list' and not just {} because we want variables to
# be expanded in this list.
set l_stock_body [list\
"List of $full_command subcommands\:.*\[\r\n\]+"\
"Type \"help $full_command\" followed by $full_command subcommand name for full documentation\.\[\r\n\]+"\
"Type \"apropos word\" to search for commands related to \"word\"\.\[\r\n\]+"\
"Command name abbreviations are allowed if unambiguous\."]
set l_entire_body [concat $expected_initial_lines $l_stock_body]
if {[llength $args]>0} {
help_test_raw "help ${command}" $l_entire_body [lindex $args 0]
} else {
help_test_raw "help ${command}" $l_entire_body
}
}
/gdbserver-support.exp
0,0 → 1,308
# Copyright 2000, 2002, 2003, 2004, 2005, 2006, 2007, 2008
# Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
# This file is based on config/gdbserver.exp, which was written by
# Michael Snyder (msnyder@redhat.com).
 
#
# To be addressed or set in your baseboard config file:
#
# set_board_info gdb_protocol "remote"
# Unles you have a gdbserver that uses a different protocol...
#
# set_board_info gdb_server_prog
# This will be the path to the gdbserver program you want to test.
# Defaults to "gdbserver".
#
# set_board_info sockethost
# The name of the host computer whose socket is being used.
# Defaults to "localhost". Note: old gdbserver requires
# that you define this, but libremote/gdbserver does not.
#
# set_board_info gdb,socketport
# Port id to use for socket connection. If not set explicitly,
# it will start at "2345" and increment for each use.
#
 
#
# gdb_target_cmd
# Send gdb the "target" command
#
proc gdb_target_cmd { targetname serialport } {
global gdb_prompt
 
set serialport_re [string_to_regexp $serialport]
for {set i 1} {$i <= 3} {incr i} {
send_gdb "target $targetname $serialport\n"
gdb_expect 60 {
-re "A program is being debugged already.*ill it.*y or n. $" {
send_gdb "y\n"
exp_continue
}
-re "unknown host.*$gdb_prompt" {
verbose "Couldn't look up $serialport"
}
-re "Couldn't establish connection to remote.*$gdb_prompt $" {
verbose "Connection failed"
}
-re "Remote MIPS debugging.*$gdb_prompt" {
verbose "Set target to $targetname"
return 0
}
-re "Remote debugging using .*$serialport_re.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
-re "Remote target $targetname connected to.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
-re "Connected to.*$gdb_prompt $" {
verbose "Set target to $targetname"
return 0
}
-re "Ending remote.*$gdb_prompt $" { }
-re "Connection refused.*$gdb_prompt $" {
verbose "Connection refused by remote target. Pausing, and trying again."
sleep 30
continue
}
-re "Timeout reading from remote system.*$gdb_prompt $" {
verbose "Got timeout error from gdb."
}
-notransfer -re "Remote debugging using .*\r\n> $" {
# We got an unexpected prompt while creating the target.
# Leave it there for the test to diagnose.
return 1
}
timeout {
send_gdb ""
break
}
}
}
return 1
}
 
 
global portnum
set portnum "2345"
 
# Locate the gdbserver binary. Returns "" if gdbserver could not be found.
 
proc find_gdbserver { } {
global GDB
 
if [target_info exists gdb_server_prog] {
return [target_info gdb_server_prog]
}
 
set gdbserver "${GDB}server"
if { [file isdirectory $gdbserver] } {
append gdbserver "/gdbserver"
}
 
if { [file executable $gdbserver] } {
return $gdbserver
}
 
return ""
}
 
# Return non-zero if we should skip gdbserver-specific tests.
 
proc skip_gdbserver_tests { } {
if { [find_gdbserver] == "" } {
return 1
}
 
return 0
}
 
# Download the currently loaded program to the target if necessary.
# Return the target system filename.
 
proc gdbserver_download { } {
global gdbserver_host_exec
global gdbserver_host_mtime
global gdbserver_server_exec
global last_loaded_file
 
set host_exec $last_loaded_file
 
# If we already downloaded a file to the target, see if we can reuse it.
set reuse 0
if { [info exists gdbserver_server_exec] } {
set reuse 1
 
# If the file has changed, we can not.
if { $host_exec != $gdbserver_host_exec } {
set reuse 0
}
 
# If the mtime has changed, we can not.
if { [file mtime $host_exec] != $gdbserver_host_mtime } {
set reuse 0
}
}
 
if { $reuse == 0 } {
set gdbserver_host_exec $host_exec
set gdbserver_host_mtime [file mtime $host_exec]
if [is_remote target] {
set gdbserver_server_exec [gdb_download $host_exec]
} else {
set gdbserver_server_exec $host_exec
}
}
 
return $gdbserver_server_exec
}
 
# Start a gdbserver process with initial OPTIONS and trailing ARGUMENTS.
# The port will be filled in between them automatically.
#
# Returns the target protocol and socket to connect to.
 
proc gdbserver_start { options arguments } {
global portnum
 
# Port id -- either specified in baseboard file, or managed here.
if [target_info exists gdb,socketport] {
set portnum [target_info gdb,socketport]
} else {
# Bump the port number to avoid conflicts with hung ports.
incr portnum
}
 
# Extract the local and remote host ids from the target board struct.
if [target_info exists sockethost] {
set debughost [target_info sockethost]
} else {
set debughost "localhost:"
}
 
# Extract the protocol
if [target_info exists gdb_protocol] {
set protocol [target_info gdb_protocol]
} else {
set protocol "remote"
}
 
set gdbserver [find_gdbserver]
 
# Export the host:port pair.
set gdbport $debughost$portnum
 
# Fire off the debug agent.
set gdbserver_command "$gdbserver"
if { $options != "" } {
append gdbserver_command " $options"
}
append gdbserver_command " :$portnum"
if { $arguments != "" } {
append gdbserver_command " $arguments"
}
 
set server_spawn_id [remote_spawn target $gdbserver_command]
 
# Wait for the server to open its TCP socket, so that GDB can connect.
expect {
-i $server_spawn_id
-notransfer
-re "Listening on" { }
}
 
# We can't just call close, because if gdbserver is local then that means
# that it will get a SIGHUP. Doing it this way could also allow us to
# get at the inferior's input or output if necessary, and means that we
# don't need to redirect output.
expect_background {
-i $server_spawn_id
full_buffer { }
eof {
# The spawn ID is already closed now (but not yet waited for).
wait -i $expect_out(spawn_id)
}
}
 
return [list $protocol $gdbport]
}
 
# Start a gdbserver process running SERVER_EXEC, and connect GDB
# to it. CHILD_ARGS are passed to the inferior.
#
# Returns the target protocol and socket to connect to.
 
proc gdbserver_spawn { child_args } {
set target_exec [gdbserver_download]
 
# Fire off the debug agent. This flavour of gdbserver takes as
# arguments the port information, the name of the executable file to
# be debugged, and any arguments.
set arguments "$target_exec"
if { $child_args != "" } {
append arguments " $child_args"
}
return [gdbserver_start "" $arguments]
}
 
# Start a gdbserver process running HOST_EXEC and pass CHILD_ARGS
# to it. Return 0 on success, or non-zero on failure.
 
proc gdbserver_run { child_args } {
global gdbserver_protocol
global gdbserver_gdbport
 
# Kill anything running before we try to start gdbserver, in case
# we are sharing a serial connection.
global gdb_prompt
send_gdb "kill\n"
gdb_expect 120 {
-re "Kill the program being debugged. .y or n. $" {
send_gdb "y\n"
verbose "\t\tKilling previous program being debugged"
exp_continue
}
-re "$gdb_prompt $" {
# OK.
}
}
 
set res [gdbserver_spawn $child_args]
set gdbserver_protocol [lindex $res 0]
set gdbserver_gdbport [lindex $res 1]
 
return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}
 
# Reconnect to the previous gdbserver session.
 
proc gdbserver_reconnect { } {
global gdbserver_protocol
global gdbserver_gdbport
 
return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}
 
# Start and connect to a gdbserver in extended mode.
proc gdbserver_start_extended { } {
set res [gdbserver_start "--multi" ""]
set gdbserver_protocol "extended-[lindex $res 0]"
set gdbserver_gdbport [lindex $res 1]
 
return [gdb_target_cmd $gdbserver_protocol $gdbserver_gdbport]
}
/emc-support.exp
0,0 → 1,223
proc gdb_emc_readvar { varname } {
global gdb_prompt;
 
set result -1;
send_gdb "print $varname\n"
gdb_expect 5 {
-re "\[$\].*= (\[0-9\]+).*$gdb_prompt $" {
set result $expect_out(1,string);
}
-re "$gdb_prompt $" { }
default { }
}
return $result;
}
proc gdb_emc_gettpnum { testname } {
global gdb_prompt;
 
if { $testname != "" } {
gdb_test "trace $testname" "" ""
}
return [gdb_emc_readvar "\$tpnum"];
}
 
proc gdb_emc_setactions { testname actionname args } {
global gdb_prompt;
 
set state 0;
set status "pass";
send_gdb "actions $actionname\n";
set expected_result "";
gdb_expect 5 {
-re "No tracepoint number .*$gdb_prompt $" {
fail $testname
return 1;
}
-re "Enter actions for tracepoint $actionname.*>" {
if { [llength $args] > 0 } {
set lastcommand "[lindex $args $state]";
send_gdb "[lindex $args $state]\n";
incr state;
set expected_result [lindex $args $state];
incr state;
} else {
send_gdb "end\n";
}
exp_continue;
}
-re "\(.*\[\r\n\]+)\[ \t]*> $" {
if { $expected_result != "" } {
# Remove echoed command and its associated newline.
regsub "^\[^\r\n\]+\[\r\n\]+" "$expect_out(1,string)" "" out;
# Strip off any newlines at the end of the string.
regsub "\[\r\n\]+$" "$out" "" out;
verbose "expected '$expected_result', got '$out', expect_out is '$expect_out(1,string)'";
if ![regexp $expected_result $out] {
set status "fail";
}
set expected_result "";
}
if { $state < [llength $args] } {
send_gdb "[lindex $args $state]\n";
incr state;
set expected_result [lindex $args $state];
incr state;
} else {
send_gdb "end\n";
set expected_result "";
}
exp_continue;
}
-re "\(.*\)$gdb_prompt $" {
if { $expected_result != "" } {
if ![regexp $expected_result $expect_out(1,string)] {
set status "fail";
}
set expected_result "";
}
if { [llength $args] < $state } {
set status "fail";
}
}
default {
set status "fail";
}
}
if { $testname != "" } {
$status $testname;
}
if { $status == "pass" } then {
return 0;
} else {
return 1;
}
}
 
#
# test collect command
#
 
proc gdb_emc_tracetest_collect { arg1 msgstring } {
global decimal
global gdb_prompt;
 
set teststate 0
gdb_expect 30 {
-re "Enter actions for tracepoint $decimal.*> $" {
send_gdb "collect $arg1\n"
incr teststate;
exp_continue
}
-re "> $" {
if { $teststate == 1 } {
send_gdb "end\n"
incr teststate;
exp_continue
} else {
fail "$msgstring"
}
}
-re ".*$gdb_prompt $" {
if { $teststate == 2 } {
pass "$msgstring";
} else {
fail "$msgstring";
}
}
default {
fail "$msgstring (default)";
}
}
regsub -all "(\[($@*+)\])" "collect $arg1" "\[\\1\]" arg1_regexp;
gdb_test "info tracepoints" ".*$arg1_regexp.*" "$msgstring info tracepoint"
}
 
proc gdb_delete_tracepoints { } {
global gdb_prompt;
 
send_gdb "delete tracepoints\n"
gdb_expect 30 {
-re "Delete all tracepoints.*y or n.*$" {
send_gdb "y\n"
exp_continue;
}
-re "$gdb_prompt $" { }
timeout { fail "delete all tracepoints (timeout)" }
}
}
 
 
# Send each command in the list CMDLIST to gdb. If we see the string
# "error" or "warning" from gdb, we assume an error has occured and
# return a non-zero result. All of the commands in CMDLIST are always
# sent, even if an error occurs.
# If TESTNAME is non-null, we call pass or fail with the string in TESTNAME
# depending on whether or not an error/warning has occurred.
#
proc gdb_do_cmdlist { cmdlist testname } {
global gdb_prompt;
 
set status 0;
 
foreach x $cmdlist {
send_gdb "$x\n";
gdb_expect 60 {
-re "\[Ee\]rror|\[Ww\]arning" {
set status 1;
exp_continue;
}
-re "$gdb_prompt $" { }
-re "\[\r\n\]\[ \t\]*> *$" { }
}
}
if { $testname != "" } {
if { $status == 0 } {
pass "$testname";
} else {
fail "$testname";
}
}
return $status;
}
 
#
# Given the file FILENAME, we read it as a list of commands and generate
# a list suitable for use by gdb_do_cmdlist. Lines beginning with # are
# ignored; blank lines are interpreted as empty lines to be sent to gdb.
#
proc gdb_process_cmdfile { filename } {
set id [open $filename "r"];
if { $id < 0 } {
return "";
}
set result {};
while { [gets $id line] >= 0 } {
if [regexp "^#" $line] {
continue;
}
set result [concat $result [list "$line"]];
}
close $id;
return $result;
}
 
# gdb_find_c_test_baseline
# returns -1 on failure (CALLER MUST CHECK RETURN!)
proc gdb_find_c_test_baseline { } {
global gdb_prompt;
 
set gdb_c_test_baseline -1;
 
send_gdb "list gdb_c_test\n"
gdb_expect {
-re "void.*p5,.*void.*p6.*\[\r\n\](\[0-9\]+)\[\t \]+\{.*$gdb_prompt $" {
set gdb_c_test_baseline $expect_out(1,string)
}
-re "$gdb_prompt $" { }
default { }
}
return $gdb_c_test_baseline;
}
 
 
/mi-support.exp
0,0 → 1,1349
# Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008
# Free Software Foundation, Inc.
 
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
 
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
 
# This file was based on a file written by Fred Fish. (fnf@cygnus.com)
 
# Test setup routines that work with the MI interpreter.
 
# The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
# Set it if it is not already set.
global mi_gdb_prompt
if ![info exists mi_gdb_prompt] then {
set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"
}
 
global mi_inferior_spawn_id
global mi_inferior_tty_name
 
set MIFLAGS "-i=mi"
 
#
# mi_gdb_exit -- exit the GDB, killing the target program if necessary
#
proc mi_gdb_exit {} {
catch mi_uncatched_gdb_exit
}
 
proc mi_uncatched_gdb_exit {} {
global GDB
global GDBFLAGS
global verbose
global gdb_spawn_id;
global gdb_prompt
global mi_gdb_prompt
global MIFLAGS
 
gdb_stop_suppressing_tests;
 
if { [info procs sid_exit] != "" } {
sid_exit
}
 
if ![info exists gdb_spawn_id] {
return;
}
 
verbose "Quitting $GDB $GDBFLAGS $MIFLAGS"
 
if { [is_remote host] && [board_info host exists fileid] } {
send_gdb "999-gdb-exit\n";
gdb_expect 10 {
-re "y or n" {
send_gdb "y\n";
exp_continue;
}
-re "Undefined command.*$gdb_prompt $" {
send_gdb "quit\n"
exp_continue;
}
-re "DOSEXIT code" { }
default { }
}
}
 
if ![is_remote host] {
remote_close host;
}
unset gdb_spawn_id
}
 
#
# mi_gdb_start [INFERIOR_PTY] -- start gdb running, default procedure
#
# INFERIOR_PTY should be set to separate-inferior-tty to have the inferior work
# with it's own PTY. If set to same-inferior-tty, the inferior shares GDB's PTY.
# The default value is same-inferior-tty.
#
# When running over NFS, particularly if running many simultaneous
# tests on different hosts all using the same server, things can
# get really slow. Give gdb at least 3 minutes to start up.
#
proc mi_gdb_start { args } {
global verbose
global GDB
global GDBFLAGS
global gdb_prompt
global mi_gdb_prompt
global timeout
global gdb_spawn_id;
global MIFLAGS
 
gdb_stop_suppressing_tests;
set inferior_pty no-tty
 
if { [llength $args] == 1} {
set inferior_pty [lindex $args 0]
}
 
set separate_inferior_pty [string match $inferior_pty separate-inferior-tty]
 
# Start SID.
if { [info procs sid_start] != "" } {
verbose "Spawning SID"
sid_start
}
 
verbose "Spawning $GDB -nw $GDBFLAGS $MIFLAGS"
 
if [info exists gdb_spawn_id] {
return 0;
}
 
if ![is_remote host] {
if { [which $GDB] == 0 } then {
perror "$GDB does not exist."
exit 1
}
}
 
# Create the new PTY for the inferior process.
if { $separate_inferior_pty } {
spawn -pty
global mi_inferior_spawn_id
global mi_inferior_tty_name
set mi_inferior_spawn_id $spawn_id
set mi_inferior_tty_name $spawn_out(slave,name)
}
 
set res [remote_spawn host "$GDB -nw $GDBFLAGS $MIFLAGS [host_info gdb_opts]"];
if { $res < 0 || $res == "" } {
perror "Spawning $GDB failed."
return 1;
}
gdb_expect {
-re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" {
# We have a new format mi startup prompt. If we are
# running mi1, then this is an error as we should be
# using the old-style prompt.
if { $MIFLAGS == "-i=mi1" } {
perror "(mi startup) Got unexpected new mi prompt."
remote_close host;
return -1;
}
verbose "GDB initialized."
}
-re "\[^~\].*$mi_gdb_prompt$" {
# We have an old format mi startup prompt. If we are
# not running mi1, then this is an error as we should be
# using the new-style prompt.
if { $MIFLAGS != "-i=mi1" } {
perror "(mi startup) Got unexpected old mi prompt."
remote_close host;
return -1;
}
verbose "GDB initialized."
}
-re ".*$gdb_prompt $" {
untested "Skip mi tests (got non-mi prompt)."
remote_close host;
return -1;
}
-re ".*unrecognized option.*for a complete list of options." {
untested "Skip mi tests (not compiled with mi support)."
remote_close host;
return -1;
}
-re ".*Interpreter `mi' unrecognized." {
untested "Skip mi tests (not compiled with mi support)."
remote_close host;
return -1;
}
timeout {
perror "(timeout) GDB never initialized after 10 seconds."
remote_close host;
return -1
}
}
set gdb_spawn_id -1;
 
# FIXME: mi output does not go through pagers, so these can be removed.
# force the height to "unlimited", so no pagers get used
send_gdb "100-gdb-set height 0\n"
gdb_expect 10 {
-re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" {
verbose "Setting height to 0." 2
}
timeout {
warning "Couldn't set the height to 0"
}
}
# force the width to "unlimited", so no wraparound occurs
send_gdb "101-gdb-set width 0\n"
gdb_expect 10 {
-re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
verbose "Setting width to 0." 2
}
timeout {
warning "Couldn't set the width to 0."
}
}
# If allowing the inferior to have its own PTY then assign the inferior
# its own terminal device here.
if { $separate_inferior_pty } {
send_gdb "102-inferior-tty-set $mi_inferior_tty_name\n"
gdb_expect 10 {
-re ".*102\\\^done\r\n$mi_gdb_prompt$" {
verbose "redirect inferior output to new terminal device."
}
timeout {
warning "Couldn't redirect inferior output." 2
}
}
}
 
return 0;
}
 
# Many of the tests depend on setting breakpoints at various places and
# running until that breakpoint is reached. At times, we want to start
# with a clean-slate with respect to breakpoints, so this utility proc
# lets us do this without duplicating this code everywhere.
#
 
proc mi_delete_breakpoints {} {
global mi_gdb_prompt
 
# FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
send_gdb "102-break-delete\n"
gdb_expect 30 {
-re "Delete all breakpoints.*y or n.*$" {
send_gdb "y\n";
exp_continue
}
-re "102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
# This happens if there were no breakpoints
}
timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return }
}
 
# The correct output is not "No breakpoints or watchpoints." but an
# empty BreakpointTable. Also, a query is not acceptable with mi.
send_gdb "103-break-list\n"
gdb_expect 30 {
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
-re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}" {}
-re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
-re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
-re "Delete all breakpoints.*or n.*$" {
warning "Unexpected prompt for breakpoints deletion";
send_gdb "y\n";
exp_continue
}
timeout { perror "-break-list (timeout)" ; return }
}
}
 
proc mi_gdb_reinitialize_dir { subdir } {
global mi_gdb_prompt
global MIFLAGS
 
global suppress_flag
if { $suppress_flag } {
return
}
 
if [is_remote host] {
return "";
}
 
if { $MIFLAGS == "-i=mi1" } {
send_gdb "104-environment-directory\n"
gdb_expect 60 {
-re ".*Reinitialize source path to empty.*y or n. " {
warning "Got confirmation prompt for dir reinitialization."
send_gdb "y\n"
gdb_expect 60 {
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
}
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
} else {
send_gdb "104-environment-directory -r\n"
gdb_expect 60 {
-re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {}
-re "$mi_gdb_prompt$" {}
timeout {error "Dir reinitialization failed (timeout)"}
}
}
 
send_gdb "105-environment-directory $subdir\n"
gdb_expect 60 {
-re "Source directories searched.*$mi_gdb_prompt$" {
verbose "Dir set to $subdir"
}
-re "105\\\^done.*\r\n$mi_gdb_prompt$" {
# FIXME: We return just the prompt for now.
verbose "Dir set to $subdir"
# perror "Dir \"$subdir\" failed."
}
}
}
 
# Send GDB the "target" command.
# FIXME: Some of these patterns are not appropriate for MI. Based on
# config/monitor.exp:gdb_target_command.
proc mi_gdb_target_cmd { targetname serialport } {
global mi_gdb_prompt
 
set serialport_re [string_to_regexp $serialport]
for {set i 1} {$i <= 3} {incr i} {
send_gdb "47-target-select $targetname $serialport\n"
gdb_expect 60 {
-re "47\\^connected.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
-re "unknown host.*$mi_gdb_prompt" {
verbose "Couldn't look up $serialport"
}
-re "Couldn't establish connection to remote.*$mi_gdb_prompt$" {
verbose "Connection failed";
}
-re "Remote MIPS debugging.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
-re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
-re "Remote target $targetname connected to.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
-re "Connected to.*$mi_gdb_prompt$" {
verbose "Set target to $targetname";
return 0;
}
-re "Ending remote.*$mi_gdb_prompt$" { }
-re "Connection refused.*$mi_gdb_prompt$" {
verbose "Connection refused by remote target. Pausing, and trying again."
sleep 5
continue
}
-re "Timeout reading from remote system.*$mi_gdb_prompt$" {
verbose "Got timeout error from gdb.";
}
timeout {
send_gdb "";
break
}
}
}
return 1
}
 
#
# load a file into the debugger (file command only).
# return a -1 if anything goes wrong.
#
proc mi_gdb_file_cmd { arg } {
global verbose
global loadpath
global loadfile
global GDB
global mi_gdb_prompt
global last_loaded_file
upvar timeout timeout
 
set last_loaded_file $arg
 
if [is_remote host] {
set arg [remote_download host $arg];
if { $arg == "" } {
error "download failed"
return -1;
}
}
 
# FIXME: Several of these patterns are only acceptable for console
# output. Queries are an error for mi.
send_gdb "105-file-exec-and-symbols $arg\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$mi_gdb_prompt$" {
verbose "\t\tLoaded $arg into the $GDB"
return 0
}
-re "has no symbol-table.*$mi_gdb_prompt$" {
perror "$arg wasn't compiled with \"-g\""
return -1
}
-re "Load new symbol table from \".*\".*y or n. $" {
send_gdb "y\n"
gdb_expect 120 {
-re "Reading symbols from.*done.*$mi_gdb_prompt$" {
verbose "\t\tLoaded $arg with new symbol table into $GDB"
# All OK
}
timeout {
perror "(timeout) Couldn't load $arg, other program already loaded."
return -1
}
}
}
-re "No such file or directory.*$mi_gdb_prompt$" {
perror "($arg) No such file or directory\n"
return -1
}
-re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
# We (MI) are just giving the prompt back for now, instead of giving
# some acknowledgement.
return 0
}
timeout {
perror "couldn't load $arg into $GDB (timed out)."
return -1
}
eof {
# This is an attempt to detect a core dump, but seems not to
# work. Perhaps we need to match .* followed by eof, in which
# gdb_expect does not seem to have a way to do that.
perror "couldn't load $arg into $GDB (end of file)."
return -1
}
}
}
 
#
# connect to the target and download a file, if necessary.
# return a -1 if anything goes wrong.
#
proc mi_gdb_target_load { } {
global verbose
global loadpath
global loadfile
global GDB
global mi_gdb_prompt
upvar timeout timeout
 
if { [info procs gdbserver_gdb_load] != "" } {
mi_gdb_test "kill" ".*" ""
set res [gdbserver_gdb_load]
set protocol [lindex $res 0]
set gdbport [lindex $res 1]
 
if { [mi_gdb_target_cmd $protocol $gdbport] != 0 } {
return -1
}
} elseif { [info procs send_target_sid] != "" } {
# For SID, things get complex
send_gdb "kill\n"
gdb_expect 10 {
-re ".*$mi_gdb_prompt$"
}
send_target_sid
gdb_expect 60 {
-re "\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to connect to SID target"
return -1
}
}
send_gdb "48-target-download\n"
gdb_expect 10 {
-re "48\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to download to SID target"
return -1
}
}
} elseif { [target_info protocol] == "sim" } {
# For the simulator, just connect to it directly.
send_gdb "47-target-select sim\n"
gdb_expect 10 {
-re "47\\^connected.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to select sim target"
return -1
}
}
send_gdb "48-target-download\n"
gdb_expect 10 {
-re "48\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to download to sim target"
return -1
}
}
} elseif { [target_info gdb_protocol] == "remote" } {
# remote targets
if { [mi_gdb_target_cmd "remote" [target_info netport]] != 0 } {
perror "Unable to connect to remote target"
return -1
}
send_gdb "48-target-download\n"
gdb_expect 10 {
-re "48\\^done.*$mi_gdb_prompt$" {
}
timeout {
perror "Unable to download to remote target"
return -1
}
}
}
return 0
}
 
#
# load a file into the debugger.
# return a -1 if anything goes wrong.
#
proc mi_gdb_load { arg } {
if { $arg != "" } {
return [mi_gdb_file_cmd $arg]
}
return 0
}
 
# mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
# test the result.
#
# COMMAND is the command to execute, send to GDB with send_gdb. If
# this is the null string no command is sent.
# PATTERN is the pattern to match for a PASS, and must NOT include
# the \r\n sequence immediately before the gdb prompt.
# MESSAGE is the message to be printed. (If this is the empty string,
# then sometimes we don't call pass or fail at all; I don't
# understand this at all.)
# IPATTERN is the pattern to match for the inferior's output. This parameter
# is optional. If present, it will produce a PASS if the match is
# successful, and a FAIL if unsuccessful.
#
# Returns:
# 1 if the test failed,
# 0 if the test passes,
# -1 if there was an internal error.
#
proc mi_gdb_test { args } {
global verbose
global mi_gdb_prompt
global GDB expect_out
upvar timeout timeout
 
set command [lindex $args 0]
set pattern [lindex $args 1]
set message [lindex $args 2]
 
if [llength $args]==4 {
set ipattern [lindex $args 3]
}
 
if [llength $args]==5 {
set question_string [lindex $args 3];
set response_string [lindex $args 4];
} else {
set question_string "^FOOBAR$"
}
 
if $verbose>2 then {
send_user "Sending \"$command\" to gdb\n"
send_user "Looking to match \"$pattern\"\n"
send_user "Message is \"$message\"\n"
}
 
set result -1
set string "${command}\n";
set string_regex [string_to_regexp $command]
 
if { $command != "" } {
while { "$string" != "" } {
set foo [string first "\n" "$string"];
set len [string length "$string"];
if { $foo < [expr $len - 1] } {
set str [string range "$string" 0 $foo];
if { [send_gdb "$str"] != "" } {
global suppress_flag;
 
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
gdb_expect 2 {
-re "\[\r\n\]" { }
timeout { }
}
set string [string range "$string" [expr $foo + 1] end];
} else {
break;
}
}
if { "$string" != "" } {
if { [send_gdb "$string"] != "" } {
global suppress_flag;
 
if { ! $suppress_flag } {
perror "Couldn't send $command to GDB.";
}
fail "$message";
return $result;
}
}
}
 
if [info exists timeout] {
set tmt $timeout;
} else {
global timeout;
if [info exists timeout] {
set tmt $timeout;
} else {
set tmt 60;
}
}
gdb_expect $tmt {
-re "\\*\\*\\* DOSEXIT code.*" {
if { $message != "" } {
fail "$message";
}
gdb_suppress_entire_file "GDB died";
return -1;
}
-re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
if ![isnative] then {
warning "Can`t communicate to remote target."
}
gdb_exit
gdb_start
set result -1
}
-re "^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" {
# At this point, $expect_out(1,string) is the MI input command.
# and $expect_out(2,string) is the MI output command.
# If $expect_out(1,string) is "", then there was no MI input command here.
 
# NOTE, there is no trailing anchor because with GDB/MI,
# asynchronous responses can happen at any point, causing more
# data to be available. Normally an anchor is used to make
# sure the end of the output is matched, however, $mi_gdb_prompt
# is just as good of an anchor since mi_gdb_test is meant to
# match a single mi output command. If a second GDB/MI output
# response is sent, it will be in the buffer for the next
# time mi_gdb_test is called.
if ![string match "" $message] then {
pass "$message"
}
set result 0
}
-re "(${question_string})$" {
send_gdb "$response_string\n";
exp_continue;
}
-re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
perror "Undefined command \"$command\"."
fail "$message"
set result 1
}
-re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
perror "\"$command\" is not a unique command name."
fail "$message"
set result 1
}
-re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
set errmsg "$message (the program exited)"
} else {
set errmsg "$command (the program exited)"
}
fail "$errmsg"
return -1
}
-re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
set errmsg "$message (the program is no longer running)"
} else {
set errmsg "$command (the program is no longer running)"
}
fail "$errmsg"
return -1
}
-re ".*$mi_gdb_prompt\[ \]*$" {
if ![string match "" $message] then {
fail "$message"
}
set result 1
}
"<return>" {
send_gdb "\n"
perror "Window too small."
fail "$message"
}
-re "\\(y or n\\) " {
send_gdb "n\n"
perror "Got interactive prompt."
fail "$message"
}
eof {
perror "Process no longer exists"
if { $message != "" } {
fail "$message"
}
return -1
}
full_buffer {
perror "internal buffer is full."
fail "$message"
}
timeout {
if ![string match "" $message] then {
fail "$message (timeout)"
}
set result 1
}
}
 
# If the GDB output matched, compare the inferior output.
if { $result == 0 } {
if [ info exists ipattern ] {
if { ![target_info exists gdb,noinferiorio] } {
global mi_inferior_spawn_id
expect {
-i $mi_inferior_spawn_id -re "$ipattern" {
pass "$message inferior output"
}
timeout {
fail "$message inferior output (timeout)"
set result 1
}
}
} else {
unsupported "$message inferior output"
}
}
}
 
return $result
}
 
#
# MI run command. (A modified version of gdb_run_cmd)
#
 
# In patterns, the newline sequence ``\r\n'' is matched explicitly as
# ``.*$'' could swallow up output that we attempt to match elsewhere.
 
proc mi_run_cmd {args} {
global suppress_flag
if { $suppress_flag } {
return -1
}
global mi_gdb_prompt
 
if [target_info exists gdb_init_command] {
send_gdb "[target_info gdb_init_command]\n";
gdb_expect 30 {
-re "$mi_gdb_prompt$" { }
default {
perror "gdb_init_command for target failed";
return;
}
}
}
 
if { [mi_gdb_target_load] < 0 } {
return
}
 
if [target_info exists use_gdb_stub] {
if [target_info exists gdb,do_reload_on_run] {
send_gdb "000-exec-continue\n";
gdb_expect 60 {
-re "000\\^running\[\r\n\]+$mi_gdb_prompt$" {}
default {}
}
return;
}
 
if [target_info exists gdb,start_symbol] {
set start [target_info gdb,start_symbol];
} else {
set start "start";
}
 
# HACK: Should either use 000-jump or fix the target code
# to better handle RUN.
send_gdb "jump *$start\n"
warning "Using CLI jump command, expect run-to-main FAIL"
return
}
 
send_gdb "000-exec-run $args\n"
gdb_expect {
-re "000\\^running\r\n${mi_gdb_prompt}" {
}
timeout {
perror "Unable to start target"
return
}
}
# NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
}
 
#
# Just like run-to-main but works with the MI interface
#
 
proc mi_run_to_main { } {
global suppress_flag
if { $suppress_flag } {
return -1
}
 
global srcdir
global subdir
global binfile
global srcfile
 
mi_delete_breakpoints
mi_gdb_reinitialize_dir $srcdir/$subdir
mi_gdb_load ${binfile}
 
mi_runto main
}
 
 
# Just like gdb's "runto" proc, it will run the target to a given
# function. The big difference here between mi_runto and mi_execute_to
# is that mi_execute_to must have the inferior running already. This
# proc will (like gdb's runto) (re)start the inferior, too.
#
# FUNC is the linespec of the place to stop (it inserts a breakpoint here).
# It returns:
# -1 if test suppressed, failed, timedout
# 0 if test passed
 
proc mi_runto_helper {func run_or_continue} {
global suppress_flag
if { $suppress_flag } {
return -1
}
 
global mi_gdb_prompt expect_out
global hex decimal fullname_syntax
 
set test "mi runto $func"
mi_gdb_test "200-break-insert -t $func" \
"200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"$func\(\\\(.*\\\)\)?\",file=\".*\",line=\"\[0-9\]*\",times=\"0\"\}" \
"breakpoint at $func"
 
if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
|| ![scan $str {number="%d"} bkptno]} {
set bkptno {[0-9]+}
}
 
if {$run_or_continue == "run"} {
mi_run_cmd
} else {
send_gdb "000-exec-continue\n"
gdb_expect {
-re "000\\^running\r\n${mi_gdb_prompt}" {
}
timeout {
fail "$test"
return -1
}
}
}
 
gdb_expect {
-re ".*000\\*stopped,thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=\(\\\[.*\\\]\|\{.*\}\),file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}\r\n$mi_gdb_prompt$" {
pass "$test"
return 0
}
-re ".*$mi_gdb_prompt$" {
fail "$test (2)"
}
timeout {
fail "$test (timeout)"
return -1
}
}
}
 
proc mi_runto {func} {
mi_runto_helper $func "run"
}
 
# Next to the next statement
# For return values, see mi_execute_to_helper
 
proc mi_next { test } {
return [mi_next_to {.*} {.*} {.*} {.*} $test]
}
 
 
# Step to the next statement
# For return values, see mi_execute_to_helper
 
proc mi_step { test } {
return [mi_step_to {.*} {.*} {.*} {.*} $test]
}
 
# cmd should not include the number or newline (i.e. "exec-step 3", not
# "220-exec-step 3\n"
 
# Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
# after the first prompt is printed.
 
proc mi_execute_to_helper { cmd reason func args file line extra test } {
global suppress_flag
if { $suppress_flag } {
return -1
}
global mi_gdb_prompt
global hex
global decimal
global fullname_syntax
send_gdb "220-$cmd\n"
gdb_expect {
-re "220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}$extra\r\n$mi_gdb_prompt$" {
pass "$test"
return 0
}
-re "220\\^running\r\n${mi_gdb_prompt}.*220\\*stopped,reason=\"$reason\",thread-id=\"$decimal\",frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}.*\r\n$mi_gdb_prompt$" {
fail "$test (stopped at wrong place)"
return -1
}
-re "220\\^running\r\n${mi_gdb_prompt}.*\r\n${mi_gdb_prompt}$" {
fail "$test (unknown output after running)"
return -1
}
timeout {
fail "$test (timeout)"
return -1
}
}
}
 
proc mi_execute_to { cmd reason func args file line extra test } {
mi_execute_to_helper "$cmd" "$reason" "$func" "\\\[$args\\\]" \
"$file" "$line" "$extra" "$test"
}
 
proc mi_next_to { func args file line test } {
mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
 
proc mi_step_to { func args file line test } {
mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
 
proc mi_finish_to { func args file line result ret test } {
mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
 
proc mi_continue_to {func} {
mi_runto_helper $func "continue"
}
 
proc mi0_execute_to { cmd reason func args file line extra test } {
mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
"$file" "$line" "$extra" "$test"
}
 
proc mi0_next_to { func args file line test } {
mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
 
proc mi0_step_to { func args file line test } {
mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
"$file" "$line" "" "$test"
}
 
proc mi0_finish_to { func args file line result ret test } {
mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
"$file" "$line" \
",gdb-result-var=\"$result\",return-value=\"$ret\"" \
"$test"
}
 
proc mi0_continue_to { bkptno func args file line test } {
mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
"$func" "$args" "$file" "$line" "" "$test"
}
 
# Creates varobj named NAME for EXPRESSION.
# Name cannot be "-".
proc mi_create_varobj { name expression testname } {
mi_gdb_test "-var-create $name * $expression" \
"\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \
$testname
}
 
# Deletes the specified NAME.
proc mi_delete_varobj { name testname } {
mi_gdb_test "-var-delete $name" \
"\\^done,ndeleted=.*" \
$testname
}
 
# Updates varobj named NAME and checks that all varobjs in EXPECTED
# are reported as updated, and no other varobj is updated.
# Assumes that no varobj is out of scope and that no varobj changes
# types.
proc mi_varobj_update { name expected testname } {
set er "\\^done,changelist=\\\["
set first 1
foreach item $expected {
set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\"}"
if {$first == 1} {
set er "$er$v"
set first 0
} else {
set er "$er,$v"
}
}
set er "$er\\\]"
 
verbose -log "Expecting: $er" 2
mi_gdb_test "-var-update $name" $er $testname
}
 
proc mi_check_varobj_value { name value testname } {
 
mi_gdb_test "-var-evaluate-expression $name" \
"\\^done,value=\"$value\"" \
$testname
}
 
# Check the results of the:
#
# -var-list-children VARNAME
#
# command. The CHILDREN parement should be a list of lists.
# Each inner list can have either 3 or 4 elements, describing
# fields that gdb is expected to report for child variable object,
# in the following order
#
# - Name
# - Expression
# - Number of children
# - Type
#
# If inner list has 3 elements, the gdb is expected to output no
# type for a child.
#
proc mi_list_varobj_children { varname children testname } {
 
set numchildren [llength $children]
set children_exp {}
set whatever "\"\[^\"\]+\""
 
foreach item $children {
 
set name [lindex $item 0]
set exp [lindex $item 1]
set numchild [lindex $item 2]
if {[llength $item] == 4} {
set type [lindex $item 3]
 
lappend children_exp\
"child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",type=\"$type\"}"
} else {
lappend children_exp\
"child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\"}"
}
}
set children_exp_j [join $children_exp ","]
set expected "\\^done,numchild=\"$numchildren\",children=\\\[$children_exp_j\\\]"
 
verbose -log "Expecting: $expected"
 
mi_gdb_test "-var-list-children $varname" $expected $testname
}
 
# A list of two-element lists. First element of each list is
# a Tcl statement, and the second element is the line
# number of source C file where the statement originates.
set mi_autotest_data ""
# The name of the source file for autotesting.
set mi_autotest_source ""
 
proc count_newlines { string } {
return [regexp -all "\n" $string]
}
 
# Prepares for running inline tests in FILENAME.
# See comments for mi_run_inline_test for detailed
# explanation of the idea and syntax.
proc mi_prepare_inline_tests { filename } {
 
global srcdir
global subdir
global mi_autotest_source
global mi_autotest_data
 
set mi_autotest_data {}
 
set mi_autotest_source $filename
if { ! [regexp "^/" "$filename"] } then {
set filename "$srcdir/$subdir/$filename"
}
 
set chan [open $filename]
set content [read $chan]
set line_number 1
while {1} {
set start [string first "/*:" $content]
if {$start != -1} {
set end [string first ":*/" $content]
if {$end == -1} {
error "Unterminated special comment in $filename"
}
set prefix [string range $content 0 $start]
set prefix_newlines [count_newlines $prefix]
set line_number [expr $line_number+$prefix_newlines]
set comment_line $line_number
 
set comment [string range $content [expr $start+3] [expr $end-1]]
 
set comment_newlines [count_newlines $comment]
set line_number [expr $line_number+$comment_newlines]
set comment [string trim $comment]
set content [string range $content [expr $end+3] \
[string length $content]]
lappend mi_autotest_data [list $comment $comment_line]
} else {
break
}
}
close $chan
}
 
# Helper to mi_run_inline_test below.
# Return the list of all (statement,line_number) lists
# that comprise TESTCASE. The begin and end markers
# are not included.
proc mi_get_inline_test {testcase} {
 
global mi_gdb_prompt
global mi_autotest_data
global mi_autotest_source
 
set result {}
 
set seen_begin 0
set seen_end 0
foreach l $mi_autotest_data {
 
set comment [lindex $l 0]
 
if {$comment == "BEGIN: $testcase"} {
set seen_begin 1
} elseif {$comment == "END: $testcase"} {
set seen_end 1
break
} elseif {$seen_begin==1} {
lappend result $l
}
}
 
if {$seen_begin == 0} {
error "Autotest $testcase not found"
}
 
if {$seen_begin == 1 && $seen_end == 0} {
error "Missing end marker for test $testcase"
}
 
return $result
}
 
# Sets temporary breakpoint at LOCATION.
proc mi_tbreak {location} {
 
global mi_gdb_prompt
 
mi_gdb_test "-break-insert -t $location" \
{\^done,bkpt=.*} \
"run to $location (set breakpoint)"
}
 
# Send COMMAND that must be a command that resumes
# the inferiour (run/continue/next/etc) and consumes
# the "^running" output from it.
proc mi_send_resuming_command {command test} {
 
global mi_gdb_prompt
 
send_gdb "220-$command\n"
gdb_expect {
-re "220\\^running\r\n${mi_gdb_prompt}" {
}
timeout {
fail $test
}
}
}
 
# Helper to mi_run_inline_test below.
# Sets a temporary breakpoint at LOCATION and runs
# the program using COMMAND. When the program is stopped
# returns the line at which it. Returns -1 if line cannot
# be determined.
# Does not check that the line is the same as requested.
# The caller can check itself if required.
proc mi_continue_to_line {location test} {
 
mi_tbreak $location
mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
return [mi_wait_for_stop $test]
}
 
# Wait until gdb prints the current line.
proc mi_wait_for_stop {test} {
 
global mi_gdb_prompt
 
gdb_expect {
-re ".*line=\"(.*)\".*\r\n$mi_gdb_prompt$" {
return $expect_out(1,string)
}
-re ".*$mi_gdb_prompt$" {
fail "wait for stop ($test)"
}
timeout {
fail "wait for stop ($test)"
}
}
}
 
# Run a MI test embedded in comments in a C file.
# The C file should contain special comments in the following
# three forms:
#
# /*: BEGIN: testname :*/
# /*: <Tcl statements> :*/
# /*: END: testname :*/
#
# This procedure find the begin and end marker for the requested
# test. Then, a temporary breakpoint is set at the begin
# marker and the program is run (from start).
#
# After that, for each special comment between the begin and end
# marker, the Tcl statements are executed. It is assumed that
# for each comment, the immediately preceding line is executable
# C statement. Then, gdb will be single-stepped until that
# preceding C statement is executed, and after that the
# Tcl statements in the comment will be executed.
#
# For example:
#
# /*: BEGIN: assignment-test :*/
# v = 10;
# /*: <Tcl code to check that 'v' is indeed 10 :*/
# /*: END: assignment-test :*/
#
# The mi_prepare_inline_tests function should be called before
# calling this function. A given C file can contain several
# inline tests. The names of the tests must be unique within one
# C file.
#
proc mi_run_inline_test { testcase } {
 
global mi_gdb_prompt
global hex
global decimal
global fullname_syntax
global mi_autotest_source
 
set commands [mi_get_inline_test $testcase]
 
set first 1
set line_now 1
 
foreach c $commands {
set statements [lindex $c 0]
set line [lindex $c 1]
set line [expr $line-1]
 
# We want gdb to be stopped at the expression immediately
# before the comment. If this is the first comment, the
# program is either not started yet or is in some random place,
# so we run it. For further comments, we might be already
# standing at the right line. If not continue till the
# right line.
 
if {$first==1} {
# Start the program afresh.
mi_tbreak "$mi_autotest_source:$line"
mi_run_cmd
set line_now [mi_wait_for_stop "$testcase: step to $line"]
set first 0
} elseif {$line_now!=$line} {
set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
}
 
if {$line_now!=$line} {
fail "$testcase: go to line $line"
}
 
# We're not at the statement right above the comment.
# Execute that statement so that the comment can test
# the state after the statement is executed.
 
# Single-step past the line.
mi_send_resuming_command "exec-next" "$testcase: step over $line"
set line_now [mi_wait_for_stop "$testcase: step over $line"]
 
# We probably want to use 'uplevel' so that statements
# have direct access to global variables that the
# main 'exp' file has set up. But it's not yet clear,
# will need more experience to be sure.
eval $statements
}
}
/compiler.c
0,0 → 1,76
/* This test file is part of GDB, the GNU debugger.
 
Copyright 1995, 1997, 1999, 2003, 2004, 2007, 2008
Free Software Foundation, Inc.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
 
*/
 
/* Sometimes the behavior of a test depends upon the compiler used to
compile the test program. A test script can call get_compiler_info
to figure out the compiler version and test_compiler_info to test it.
 
get_compiler_info runs the preprocessor on this file and then eval's
the result. This sets various symbols for use by test_compiler_info.
 
TODO: make compiler_info a local variable for get_compiler_info and
test_compiler_info.
 
TODO: all clients should use test_compiler_info and should not
use gcc_compiled, hp_cc_compiler, or hp_aCC_compiler.
 
*/
 
/* Note the semicolon at the end of this line. Older versions of
hp c++ have a bug in string preprocessing: if the last token on a
line is a string, then the preprocessor concatenates the next line
onto the current line and eats the newline! That messes up TCL of
course. That happens with HP aC++ A.03.13, but it no longer happens
with HP aC++ A.03.45. */
 
set compiler_info "unknown" ;
 
#if defined (__GNUC__)
#if defined (__GNUC_PATCHLEVEL__)
/* Only GCC versions >= 3.0 define the __GNUC_PATCHLEVEL__ macro. */
set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ __GNUC_PATCHLEVEL__} -]
#else
set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ "unknown"} -]
#endif
#endif
 
#if defined (__HP_CXD_SPP)
/* older hp ansi c, such as A.11.01.25171.gp, defines this */
set compiler_info [join {hpcc __HP_CXD_SPP} -]
#endif
 
#if defined (__HP_cc)
/* newer hp ansi c, such as B.11.11.28706.gp, defines this */
set compiler_info [join {hpcc __HP_cc} -]
#endif
 
#if defined (__HP_aCC)
set compiler_info [join {hpacc __HP_aCC} -]
#endif
 
#if defined (__xlc__)
/* IBM'x xlc compiler. NOTE: __xlc__ expands to a double quoted string of four
numbers seperated by '.'s: currently "7.0.0.0" */
set need_a_set [regsub -all {\.} [join {xlc __xlc__} -] - compiler_info]
#endif
 
#if defined (__ARMCC_VERSION)
set compiler_info [join {armcc __ARMCC_VERSION} -]
#endif
compiler.c Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Id \ No newline at end of property Index: java.exp =================================================================== --- java.exp (nonexistent) +++ java.exp (revision 33) @@ -0,0 +1,122 @@ +# This test code is part of GDB, the GNU debugger. + +# Copyright 1998, 1999, 2000, 2003, 2004, 2006, 2007, 2008 +# Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +load_lib "libgloss.exp" + +# GCJ_UNDER_TEST is the compiler under test. + +global tmpdir + +if ![info exists tmpdir] { + set tmpdir "/tmp" +} + +set java_initialized 0 + +# +# Build the status wrapper library as needed. +# +proc java_init { args } { + global wrapper_file; + global wrap_compile_flags; + global java_initialized + global GCJ_UNDER_TEST + global TOOL_EXECUTABLE + global env + + if { $java_initialized == 1 } { return; } + + if ![info exists GCJ_UNDER_TEST] { + if [info exists TOOL_EXECUTABLE] { + set GCJ_UNDER_TEST $TOOL_EXECUTABLE; + } else { + if [info exists env(GCJ)] { + set GCJ_UNDER_TEST $env(GCJ) + } else { + global tool_root_dir + global target_alias + + if ![is_remote host] { + set file [lookfor_file $tool_root_dir gcj]; + if { $file == "" } { + set file [lookfor_file $tool_root_dir gcc/gcj]; + } + if { $file != "" } { + set CC "$file -B[file dirname $file]/ --specs=$tool_root_dir/$target_alias/libjava/libgcj-test.spec"; + } else { + set CC [transform gcj]; + } + } else { + set CC [transform gcj] + } + set GCJ_UNDER_TEST $CC + } + } + } + + set wrapper_file ""; + set wrap_compile_flags ""; + if [target_info exists needs_status_wrapper] { + set result [build_wrapper "testglue.o"]; + if { $result != "" } { + set wrapper_file [lindex $result 0]; + set wrap_compile_flags [lindex $result 1]; + } else { + warning "Status wrapper failed to build." + } + } + + set java_initialized 1 +} + +# +# Run the test specified by srcfile and resultfile. compile_args and +# exec_args are options telling this proc how to work. +# +proc compile_java_from_source { srcfile binfile compile_args } { + global GCJ_UNDER_TEST + global runtests + global java_initialized + + if { $java_initialized != 1 } { java_init } + + set errname [file rootname [file tail $srcfile]] + if {! [runtest_file_p $runtests $errname]} { + return + } + + set args "compiler=$GCJ_UNDER_TEST" + lappend args "additional_flags=--main=[file rootname [file tail $srcfile]]" + if { $compile_args != "" } { + lappend args "additional_flags=$compile_args" + } + + if { $compile_args != "" } { + set errname "$errname $compile_args" + } + + set x [target_compile $srcfile ${binfile} executable $args] + if { $x != "" } { + verbose "target_compile failed: $x" 2 + return "$errname compilation from source"; + } +} + +# Local Variables: +# tcl-indent-level:4 +# End: Index: compiler.cc =================================================================== --- compiler.cc (nonexistent) +++ compiler.cc (revision 33) @@ -0,0 +1,63 @@ +/* This test file is part of GDB, the GNU debugger. + + Copyright 1995, 1999, 2003, 2004, 2007, 2008 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + + */ + +/* This file is exactly like compiler.c. I could just use compiler.c if + I could be sure that every C++ compiler accepted extensions of ".c". */ + +/* Note the semicolon at the end of this line. Older versions of + hp c++ have a bug in string preprocessing: if the last token on a + line is a string, then the preprocessor concatenates the next line + onto the current line and eats the newline! That messes up TCL of + course. That happens with HP aC++ A.03.13, but it no longer happens + with HP aC++ A.03.45. */ + +set compiler_info "unknown" ; + +#if defined (__GNUC__) +#if defined (__GNUC_PATCHLEVEL__) +/* Only GCC versions >= 3.0 define the __GNUC_PATCHLEVEL__ macro. */ +set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ __GNUC_PATCHLEVEL__} -] +#else +set compiler_info [join {gcc __GNUC__ __GNUC_MINOR__ "unknown"} -] +#endif +#endif + +#if defined (__HP_CXD_SPP) +/* older hp ansi c, such as A.11.01.25171.gp, defines this */ +set compiler_info [join {hpcc __HP_CXD_SPP} -] +#endif + +#if defined (__HP_cc) +/* newer hp ansi c, such as B.11.11.28706.gp, defines this */ +set compiler_info [join {hpcc __HP_cc} -] +#endif + +#if defined (__HP_aCC) +set compiler_info [join {hpacc __HP_aCC} -] +#endif + +#if defined (__xlc__) +/* IBM'x xlc compiler. NOTE: __xlc__ expands to a double quoted string of four + numbers seperated by '.'s: currently "7.0.0.0" */ +set need_a_set [regsub -all {\.} [join {xlc __xlc__} -] - compiler_info] +#endif + +#if defined (__ARMCC_VERSION) +set compiler_info [join {armcc __ARMCC_VERSION} -] +#endif Index: pascal.exp =================================================================== --- pascal.exp (nonexistent) +++ pascal.exp (revision 33) @@ -0,0 +1,152 @@ +# Copyright 2007, 2008 Free Software Foundation, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +load_lib libgloss.exp + +set pascal_init_done 0 + +# This procedure looks for a suitable pascal compiler +# For now only GNU pascal compiler and Free Pascal compiler +# are searched. +# First, environment variable GPC is checked +# if present, GPC compiler is assumed to be the value of +# that environment variable. +# Second, environment variable FPC is checked +# if present, Free Pascal compiler is assumed to be the value of +# that environment variable. +# Third, gpc executable is searched using `which gpc` +# Lastly, fpc executable is searched using `which fpc` +# Using environment variable allows to force +# which compiler is used in testsuite + +proc pascal_init {} { + global pascal_init_done + global pascal_compiler_is_gpc + global pascal_compiler_is_fpc + global gpc_compiler + global fpc_compiler + global env + + if { $pascal_init_done == 1 } { + return + } + + set pascal_compiler_is_gpc 0 + set pascal_compiler_is_fpc 0 + set gpc_compiler [transform gpc] + set fpc_compiler [transform fpc] + + if ![is_remote host] { + if { [info exists env(GPC)] } { + set pascal_compiler_is_gpc 1 + set gpc_compiler $env(GPC) + verbose -log "Assuming GNU Pascal ($gpc_compiler)" + } elseif { [info exists env(FPC)] } { + set pascal_compiler_is_fpc 1 + set fpc_compiler $env(FPC) + verbose -log "Assuming Free Pascal ($fpc_compiler)" + } elseif { [which $gpc_compiler] != 0 } { + set pascal_compiler_is_gpc 1 + verbose -log "GNU Pascal compiler found" + } elseif { [which $fpc_compiler] != 0 } { + set pascal_compiler_is_fpc 1 + verbose -log "Free Pascal compiler found" + } + } + set pascal_init_done 1 +} + +proc gpc_compile {source dest type options} { + global gpc_compiler + set add_flags "" + if {$type == "object"} { + append add_flags " -c" + } + + if { $type == "preprocess" } { + append add_flags " -E" + } + + if { $type == "assembly" } { + append add_flags " -S" + } + + foreach i $options { + if { $i == "debug" } { + if [board_info $dest exists debug_flags] { + append add_flags " [board_info $dest debug_flags]"; + } else { + append add_flags " -g" + } + } + } + + set result [remote_exec host $gpc_compiler "-o $dest --automake $add_flags $source"] + return $result +} + +proc fpc_compile {source dest type options} { + global fpc_compiler + set add_flags "" + if {$type == "object"} { + append add_flags " -Cn" + } + + if { $type == "preprocess" } { + return "Free Pascal can not preprocess" + } + + if { $type == "assembly" } { + append add_flags " -al" + } + + foreach i $options { + if { $i == "debug" } { + if [board_info $dest exists debug_flags] { + append add_flags " [board_info $dest debug_flags]"; + } else { + append add_flags " -g" + } + } + } + + set result [remote_exec host $fpc_compiler "-o$dest $add_flags $source"] + return $result +} + +proc gdb_compile_pascal {source dest type options} { + global pascal_init_done + global pascal_compiler_is_gpc + global pascal_compiler_is_fpc + + if { $pascal_init_done == 0 } { + pascal_init + } + + if { $pascal_compiler_is_fpc == 1 } { + set result [fpc_compile $source $dest $type $options] + } elseif { $pascal_compiler_is_gpc == 1 } { + set result [gpc_compile $source $dest $type $options] + } else { + unsupported "No pascal compiler found" + return "No pascal compiler. Compilation failed." + } + + if ![file exists $dest] { + unsupported "Pascal compilation failed: $result" + return "Pascal compilation failed." + } +} +

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.