URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/tags/gdb/gdb-6.8/gdb-6.8.openrisc-2.1/readline/support
- from Rev 24 to Rev 33
- ↔ Reverse comparison
Rev 24 → Rev 33
/install.sh
0,0 → 1,247
#!/bin/sh |
# |
# install - install a program, script, or datafile |
# This comes from X11R5. |
# |
# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ |
# |
# Copyright 1991 by the Massachusetts Institute of Technology |
# |
# Permission to use, copy, modify, distribute, and sell this software and its |
# documentation for any purpose is hereby granted without fee, provided that |
# the above copyright notice appear in all copies and that both that |
# copyright notice and this permission notice appear in supporting |
# documentation, and that the name of M.I.T. not be used in advertising or |
# publicity pertaining to distribution of the software without specific, |
# written prior permission. M.I.T. makes no representations about the |
# suitability of this software for any purpose. It is provided "as is" |
# without express or implied warranty. |
# |
# This script is compatible with the BSD install script, but was written |
# from scratch. |
# |
|
# set DOITPROG to echo to test this script |
|
# Don't use :- since 4.3BSD and earlier shells don't like it. |
doit="${DOITPROG-}" |
|
|
# put in absolute paths if you don't have them in your path; or use env. vars. |
|
mvprog="${MVPROG-mv}" |
cpprog="${CPPROG-cp}" |
chmodprog="${CHMODPROG-chmod}" |
chownprog="${CHOWNPROG-chown}" |
chgrpprog="${CHGRPPROG-chgrp}" |
stripprog="${STRIPPROG-strip}" |
rmprog="${RMPROG-rm}" |
mkdirprog="${MKDIRPROG-mkdir}" |
|
tranformbasename="" |
transform_arg="" |
instcmd="$mvprog" |
chmodcmd="$chmodprog 0755" |
chowncmd="" |
chgrpcmd="" |
stripcmd="" |
rmcmd="$rmprog -f" |
mvcmd="$mvprog" |
src="" |
dst="" |
dir_arg="" |
|
while [ x"$1" != x ]; do |
case $1 in |
-c) instcmd="$cpprog" |
shift |
continue;; |
|
-d) dir_arg=true |
shift |
continue;; |
|
-m) chmodcmd="$chmodprog $2" |
shift |
shift |
continue;; |
|
-o) chowncmd="$chownprog $2" |
shift |
shift |
continue;; |
|
-g) chgrpcmd="$chgrpprog $2" |
shift |
shift |
continue;; |
|
-s) stripcmd="$stripprog" |
shift |
continue;; |
|
-t=*) transformarg=`echo $1 | sed 's/-t=//'` |
shift |
continue;; |
|
-b=*) transformbasename=`echo $1 | sed 's/-b=//'` |
shift |
continue;; |
|
*) if [ x"$src" = x ] |
then |
src=$1 |
else |
# this colon is to work around a 386BSD /bin/sh bug |
: |
dst=$1 |
fi |
shift |
continue;; |
esac |
done |
|
if [ x"$src" = x ] |
then |
echo "install: no input file specified" |
exit 1 |
else |
true |
fi |
|
if [ x"$dir_arg" != x ]; then |
dst=$src |
src="" |
|
if [ -d $dst ]; then |
instcmd=: |
else |
instcmd=mkdir |
fi |
else |
|
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command |
# might cause directories to be created, which would be especially bad |
# if $src (and thus $dsttmp) contains '*'. |
|
if [ -f $src -o -d $src ] |
then |
true |
else |
echo "install: $src does not exist" |
exit 1 |
fi |
|
if [ x"$dst" = x ] |
then |
echo "install: no destination specified" |
exit 1 |
else |
true |
fi |
|
# If destination is a directory, append the input filename; if your system |
# does not like double slashes in filenames, you may need to add some logic |
|
if [ -d $dst ] |
then |
dst="$dst"/`basename $src` |
else |
true |
fi |
fi |
|
## this sed command emulates the dirname command |
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` |
|
# Make sure that the destination directory exists. |
# this part is taken from Noah Friedman's mkinstalldirs script |
|
# Skip lots of stat calls in the usual case. |
if [ ! -d "$dstdir" ]; then |
defaultIFS=' |
' |
IFS="${IFS-${defaultIFS}}" |
|
oIFS="${IFS}" |
# Some sh's can't handle IFS=/ for some reason. |
IFS='%' |
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` |
IFS="${oIFS}" |
|
pathcomp='' |
|
while [ $# -ne 0 ] ; do |
pathcomp="${pathcomp}${1}" |
shift |
|
if [ ! -d "${pathcomp}" ] ; |
then |
$mkdirprog "${pathcomp}" |
else |
true |
fi |
|
pathcomp="${pathcomp}/" |
done |
fi |
|
if [ x"$dir_arg" != x ] |
then |
$doit $instcmd $dst && |
|
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && |
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && |
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && |
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi |
else |
|
# If we're going to rename the final executable, determine the name now. |
|
if [ x"$transformarg" = x ] |
then |
dstfile=`basename $dst` |
else |
dstfile=`basename $dst $transformbasename | |
sed $transformarg`$transformbasename |
fi |
|
# don't allow the sed command to completely eliminate the filename |
|
if [ x"$dstfile" = x ] |
then |
dstfile=`basename $dst` |
else |
true |
fi |
|
# Make a temp file name in the proper directory. |
|
dsttmp=$dstdir/#inst.$$# |
|
# Move or copy the file name to the temp name |
|
$doit $instcmd $src $dsttmp && |
|
trap "rm -f ${dsttmp}" 0 && |
|
# and set any options; do chmod last to preserve setuid bits |
|
# If any of these fail, we abort the whole thing. If we want to |
# ignore errors from any of these, just make sure not to ignore |
# errors from the above "$doit $instcmd $src $dsttmp" command. |
|
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && |
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && |
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && |
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && |
|
# Now rename the file to the real destination. |
|
$doit $rmcmd -f $dstdir/$dstfile && |
$doit $mvcmd $dsttmp $dstdir/$dstfile |
|
fi && |
|
|
exit 0 |
install.sh
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: mkinstalldirs
===================================================================
--- mkinstalldirs (nonexistent)
+++ mkinstalldirs (revision 33)
@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage" 1>&2
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+case $dirmode in
+ '')
+ if mkdir -p -- . 2>/dev/null; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here
mkinstalldirs
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: config.rpath
===================================================================
--- config.rpath (nonexistent)
+++ config.rpath (revision 33)
@@ -0,0 +1,548 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2003 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit , 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ mingw* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux*)
+ case $CC in
+ icc|ecc)
+ wl='-Wl,'
+ ;;
+ ccc)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris* | sysv5*)
+ if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = yes; then
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi4*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then
+ hardcode_direct=no
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10* | hpux11*)
+ if test "$with_gnu_ld" = no; then
+ case "$host_cpu" in
+ hppa*64*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=no
+ ;;
+ ia64*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=no
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4.2uw2*)
+ hardcode_direct=yes
+ hardcode_minus_L=no
+ ;;
+ sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
+ ;;
+ sysv5*)
+ hardcode_libdir_flag_spec=
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ ;;
+ aix4* | aix5*)
+ ;;
+ amigaos*)
+ ;;
+ beos*)
+ ;;
+ bsdi4*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ ;;
+ dgux*)
+ ;;
+ freebsd1*)
+ ;;
+ freebsd*)
+ ;;
+ gnu*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case "$host_cpu" in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux*)
+ ;;
+ netbsd*)
+ ;;
+ newsos6)
+ ;;
+ nto-qnx)
+ ;;
+ openbsd*)
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ ;;
+ osf3* | osf4* | osf5*)
+ ;;
+ sco3.2v5*)
+ ;;
+ solaris*)
+ ;;
+ sunos4*)
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ ;;
+ sysv4*MP*)
+ ;;
+ uts4*)
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <
config.rpath
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: shlib-install
===================================================================
--- shlib-install (nonexistent)
+++ shlib-install (revision 33)
@@ -0,0 +1,195 @@
+#! /bin/sh
+#
+# shlib-install - install a shared library and do any necessary host-specific
+# post-installation configuration (like ldconfig)
+#
+# usage: shlib-install [-D] -O host_os -d installation-dir [-b bin-dir] -i install-prog [-U] library
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+#
+# defaults
+#
+INSTALLDIR=/usr/local/lib
+LDCONFIG=ldconfig
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-D] -O host_os -d installation-dir [-b bin-dir] -i install-prog [-U] library"
+
+# process options
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -O) shift; host_os="$1"; shift ;;
+ -d) shift; INSTALLDIR="$1"; shift ;;
+ -b) shift; BINDIR="$1" ; shift ;;
+ -i) shift; INSTALLPROG="$1" ; shift ;;
+ -D) echo=echo ; shift ;;
+ -U) uninstall=true ; shift ;;
+ -*) echo "$USAGE" >&2 ; exit 2;;
+ *) break ;;
+ esac
+done
+
+# set install target name
+LIBNAME="$1"
+
+if [ -z "$LIBNAME" ]; then
+ echo "$USAGE" >&2
+ exit 2
+fi
+
+OLDSUFF=old
+MV=mv
+RM="rm -f"
+LN="ln -s"
+
+# pre-install
+
+if [ -z "$uninstall" ]; then
+ ${echo} $RM ${INSTALLDIR}/${LIBNAME}.${OLDSUFF}
+ if [ -f "$INSTALLDIR/$LIBNAME" ]; then
+ ${echo} $MV $INSTALLDIR/$LIBNAME ${INSTALLDIR}/${LIBNAME}.${OLDSUFF}
+ fi
+fi
+
+# install/uninstall
+
+if [ -z "$uninstall" ] ; then
+ ${echo} eval ${INSTALLPROG} $LIBNAME ${INSTALLDIR}/${LIBNAME}
+else
+ ${echo} ${RM} ${INSTALLDIR}/${LIBNAME}
+fi
+
+# post-install/uninstall
+
+# HP-UX and Darwin/MacOS X require that a shared library have execute permission
+# Cygwin installs both a dll (which must go in $BINDIR) and an implicit
+# link library (in $libdir)
+case "$host_os" in
+hpux*|darwin*|macosx*)
+ if [ -z "$uninstall" ]; then
+ chmod 555 ${INSTALLDIR}/${LIBNAME}
+ fi ;;
+cygwin*)
+ IMPLIBNAME=`echo ${LIBNAME} \
+ | sed -e 's,^cyg,lib,' -e 's,[0-9]*.dll$,.dll.a,'`
+ if [ -z "$uninstall" ]; then
+ ${echo} $RM ${BINDIR}/${LIBNAME}.${OLDSUFF}
+ if [ -f "$BINDIR/$LIBNAME" ]; then
+ ${echo} $MV $BINDIR/$LIBNAME $BINDIR/$LIBNAME.$OLDSUFF
+ fi
+ ${echo} $MV ${INSTALLDIR}/${LIBNAME} ${BINDIR}/${LIBNAME}
+ ${echo} chmod a+x ${BINDIR}/${LIBNAME}
+ ${echo} eval ${INSTALLPROG} ${LIBNAME}.a \
+ ${INSTALLDIR}/${IMPLIBNAME}
+ else
+ ${echo} ${RM} ${BINDIR}/${LIBNAME}
+ ${echo} ${RM} ${INSTALLDIR}/${IMPLIBNAME}
+ fi ;;
+
+*) ;;
+esac
+
+case "$LIBNAME" in
+*.*.[0-9].[0-9]) # libname.so.M.N
+ LINK2=`echo $LIBNAME | sed 's:\(.*\..*\.[0-9]\)\.[0-9]:\1:'` # libname.so.M
+ LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]\.[0-9]:\1:'` # libname.so
+ ;;
+*.*.[0-9]) # libname.so.M
+ LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]:\1:'` # libname.so
+ ;;
+*.[0-9]) # libname.M
+ LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]:\1:'` # libname
+ ;;
+*.[0-9].[0-9].dylib) # libname.M.N.dylib
+ LINK2=`echo $LIBNAME | sed 's:\(.*\.[0-9]\)\.[0-9]:\1:'` # libname.M.dylib
+ LINK1=`echo $LIBNAME | sed 's:\(.*\)\.[0-9]\.[0-9]:\1:'` # libname.dylib
+esac
+
+INSTALL_LINK1='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK1'
+INSTALL_LINK2='${echo} cd $INSTALLDIR && ${echo} ${LN} $LIBNAME $LINK2'
+
+#
+# Create symlinks to the installed library. This section is incomplete.
+#
+case "$host_os" in
+*linux*)
+ # libname.so.M -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK2
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK2
+ fi
+
+ # libname.so -> libname.so.M
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ ${echo} cd $INSTALLDIR && ${echo} ${LN} $LINK2 $LINK1
+ fi
+ ;;
+
+bsdi4*|*gnu*|darwin*|macosx*|k*bsd*-gnu)
+ # libname.so.M -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK2
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK2
+ fi
+
+ # libname.so -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK1
+ fi
+ ;;
+
+solaris2*|aix4.[2-9]*|osf*|irix[56]*|sysv[45]*|dgux*)
+ # libname.so -> libname.so.M
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK1
+ fi
+ ;;
+
+
+# FreeBSD 3.x and above can have either a.out or ELF shared libraries
+freebsd[3-9]*|freebsdelf[3-9]*|freebsdaout[3-9]*)
+ if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then
+ # libname.so -> libname.so.M
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK1
+ fi
+ else
+ # libname.so.M -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK2
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK2
+ fi
+
+ # libname.so -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK1
+ fi
+ fi
+ ;;
+
+hpux1*)
+ # libname.sl -> libname.M
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1.sl
+ if [ -z "$uninstall" ]; then
+ eval $INSTALL_LINK1
+ fi
+ ;;
+
+cygwin*)
+ # Links to .dlls don't work. Hence shobj-conf used DLLVERSION.dll
+ # instead of so.SHLIB_MAJOR.SHLIB_MINOR. The postinstall above
+ # took care of everything else.
+ ;;
+
+*) ;;
+esac
+
+exit 0
shlib-install
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: shobj-conf
===================================================================
--- shobj-conf (nonexistent)
+++ shobj-conf (revision 33)
@@ -0,0 +1,530 @@
+#! /bin/sh
+#
+# shobj-conf -- output a series of variable assignments to be substituted
+# into a Makefile by configure which specify system-dependent
+# information for creating shared objects that may be loaded
+# into bash with `enable -f'
+#
+# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA.
+
+#
+# defaults
+#
+SHOBJ_STATUS=supported
+SHLIB_STATUS=supported
+
+SHOBJ_CC=cc
+SHOBJ_CFLAGS=
+SHOBJ_LD=
+SHOBJ_LDFLAGS=
+SHOBJ_XLDFLAGS=
+SHOBJ_LIBS=
+
+SHLIB_XLDFLAGS=
+SHLIB_LIBS=
+
+SHLIB_DOT='.'
+SHLIB_LIBPREF='lib'
+SHLIB_LIBSUFF='so'
+
+SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)'
+SHLIB_DLLVERSION='$(SHLIB_MAJOR)'
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor"
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -C) shift; SHOBJ_CC="$1"; shift ;;
+ -c) shift; host_cpu="$1"; shift ;;
+ -o) shift; host_os="$1"; shift ;;
+ -v) shift; host_vendor="$1"; shift ;;
+ *) echo "$USAGE" >&2 ; exit 2;;
+ esac
+done
+
+case "${host_os}-${SHOBJ_CC}" in
+sunos4*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD=/usr/bin/ld
+ SHOBJ_LDFLAGS='-assert pure-text'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+sunos4*)
+ SHOBJ_CFLAGS=-pic
+ SHOBJ_LD=/usr/bin/ld
+ SHOBJ_LDFLAGS='-assert pure-text'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+sunos5*-*gcc*|solaris2*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ ld_used=`gcc -print-prog-name=ld`
+ if ${ld_used} -V 2>&1 | grep GNU >/dev/null 2>&1; then
+ # This line works for the GNU ld
+ SHOBJ_LDFLAGS='-shared -Wl,-h,$@'
+ else
+ # This line works for the Solaris linker in /usr/ccs/bin/ld
+ SHOBJ_LDFLAGS='-shared -Wl,-i -Wl,-h,$@'
+ fi
+
+# SHLIB_XLDFLAGS='-R $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sunos5*|solaris2*)
+ SHOBJ_CFLAGS='-K pic'
+ SHOBJ_LD=/usr/ccs/bin/ld
+ SHOBJ_LDFLAGS='-G -dy -z text -i -h $@'
+
+# SHLIB_XLDFLAGS='-R $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+# All versions of Linux or the semi-mythical GNU Hurd.
+linux*-*|gnu*-*|k*bsd*-gnu-*)
+ SHOBJ_CFLAGS=-fPIC
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir) -Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+freebsd2* | netbsd*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-x -Bshareable'
+
+ SHLIB_XLDFLAGS='-R$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+# FreeBSD-3.x ELF
+freebsd[3-9]*|freebsdelf[3-9]*|freebsdaout[3-9]*|dragonfly*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+
+ if [ -x /usr/bin/objformat ] && [ "`/usr/bin/objformat`" = "elf" ]; then
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ else
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_XLDFLAGS='-R$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ fi
+ ;;
+
+# Darwin/MacOS X
+darwin*|macosx*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=supported
+
+ SHOBJ_CFLAGS='-fno-common'
+
+ SHOBJ_LD='${CC}'
+
+ SHLIB_LIBVERSION='$(SHLIB_MAJOR)$(SHLIB_MINOR).$(SHLIB_LIBSUFF)'
+ SHLIB_LIBSUFF='dylib'
+
+ case "${host_os}" in
+ darwin[78]*) SHOBJ_LDFLAGS=''
+ SHLIB_XLDFLAGS='-dynamiclib -arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
+ ;;
+ *) SHOBJ_LDFLAGS='-dynamic'
+ SHLIB_XLDFLAGS='-arch_only `/usr/bin/arch` -install_name $(libdir)/$@ -current_version $(SHLIB_MAJOR)$(SHLIB_MINOR) -compatibility_version $(SHLIB_MAJOR) -v'
+ ;;
+ esac
+
+ SHLIB_LIBS='-lncurses' # see if -lcurses works on MacOS X 10.1
+ ;;
+
+openbsd*)
+ SHOBJ_CFLAGS=-fPIC
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_XLDFLAGS='-R$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+bsdi2*)
+ SHOBJ_CC=shlicc2
+ SHOBJ_CFLAGS=
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS=-r
+ SHOBJ_LIBS=-lc_s.2.1.0
+
+ # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+ # the ass -- they require changing {/usr/lib,etc}/shlib.map on
+ # each system, and the library creation process is byzantine
+ SHLIB_STATUS=unsupported
+ ;;
+
+bsdi3*)
+ SHOBJ_CC=shlicc2
+ SHOBJ_CFLAGS=
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS=-r
+ SHOBJ_LIBS=-lc_s.3.0.0
+
+ # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+ # the ass -- they require changing {/usr/lib,etc}/shlib.map on
+ # each system, and the library creation process is byzantine
+ SHLIB_STATUS=unsupported
+ ;;
+
+bsdi4*)
+ # BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked
+ # shared libraries. gcc 2.x is the standard compiler, and the
+ # `normal' gcc options should work as they do in Linux.
+
+ SHOBJ_CFLAGS=-fPIC
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-soname,`basename $@ $(SHLIB_MINOR)`'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+osf*-*gcc*)
+ # Fix to use gcc linker driver from bfischer@TechFak.Uni-Bielefeld.DE
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-rpath $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+osf*)
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"'
+
+ SHLIB_XLDFLAGS='-rpath $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+aix4.[2-9]*-*gcc*) # lightly tested by jik@cisco.com
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='ld'
+ SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+ SHOBJ_XLDFLAGS='-G'
+
+ SHLIB_XLDFLAGS='-bM:SRE'
+ SHLIB_LIBS='-lcurses -lc'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+aix4.[2-9]*)
+ SHOBJ_CFLAGS=-K
+ SHOBJ_LD='ld'
+ SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+ SHOBJ_XLDFLAGS='-G'
+
+ SHLIB_XLDFLAGS='-bM:SRE'
+ SHLIB_LIBS='-lcurses -lc'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+#
+# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface
+#
+irix[56]*-*gcc*)
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+irix[56]*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+# SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@'
+# Change from David Kaelbling . If you have problems,
+# remove the `-no_unresolved'
+ SHOBJ_LDFLAGS='-shared -no_unresolved -soname $@'
+
+ SHLIB_XLDFLAGS='-rpath $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux9*-*gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
+
+ SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux9*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+
+ # If you are using the HP ANSI C compiler, you can uncomment and use
+ # this code (I have not tested it)
+# SHOBJ_STATUS=supported
+# SHLIB_STATUS=supported
+#
+# SHOBJ_CFLAGS='+z'
+# SHOBJ_LD='ld'
+# SHOBJ_LDFLAGS='-b +s'
+#
+# SHLIB_XLDFLAGS='+b $(libdir)'
+# SHLIB_LIBSUFF='sl'
+# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+
+ ;;
+
+hpux10*-*gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ # if you have problems linking here, moving the `-Wl,+h,$@' from
+ # SHLIB_XLDFLAGS to SHOBJ_LDFLAGS has been reported to work
+ SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
+
+ SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux10*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+
+ # If you are using the HP ANSI C compiler, you can uncomment and use
+ # this code (I have not tested it)
+# SHOBJ_STATUS=supported
+# SHLIB_STATUS=supported
+#
+# SHOBJ_CFLAGS='+z'
+# SHOBJ_LD='ld'
+# SHOBJ_LDFLAGS='-b +s +h $@'
+#
+# SHLIB_XLDFLAGS='+b $(libdir)'
+# SHLIB_LIBSUFF='sl'
+# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+
+ ;;
+
+hpux11*-*gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+# SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@'
+ SHOBJ_LDFLAGS='-shared -fpic -Wl,-b -Wl,+s -Wl,+h,$@'
+
+ SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux11*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+
+ # If you are using the HP ANSI C compiler, you can uncomment and use
+ # this code (I have not tested it)
+# SHOBJ_STATUS=supported
+# SHLIB_STATUS=supported
+#
+# SHOBJ_CFLAGS='+z'
+# SHOBJ_LD='ld'
+# SHOBJ_LDFLAGS='-b +s +h $@'
+#
+# SHLIB_XLDFLAGS='+b $(libdir)'
+# SHLIB_LIBSUFF='sl'
+# SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+
+ ;;
+
+sysv4*-*gcc*)
+ SHOBJ_CFLAGS=-shared
+ SHOBJ_LDFLAGS='-shared -h $@'
+ SHOBJ_LD='${CC}'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv4*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-dy -z text -G -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sco3.2v5*-*gcc*)
+ SHOBJ_CFLAGS='-fpic' # DEFAULTS TO ELF
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sco3.2v5*)
+ SHOBJ_CFLAGS='-K pic -b elf'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5uw7*-*gcc*)
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5uw7*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5UnixWare*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5UnixWare*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5OpenUNIX*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5OpenUNIX*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+dgux*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+dgux*)
+ SHOBJ_CFLAGS='-K pic'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+msdos*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+cygwin*)
+ SHOBJ_LD='$(CC)'
+ SHOBJ_LDFLAGS='-shared -Wl,--enable-auto-import -Wl,--enable-auto-image-base -Wl,--export-all -Wl,--out-implib=$(@).a'
+ SHLIB_LIBPREF='cyg'
+ SHLIB_LIBSUFF='dll'
+ SHLIB_LIBVERSION='$(SHLIB_DLLVERSION).$(SHLIB_LIBSUFF)'
+ SHLIB_LIBS='$(TERMCAP_LIB)'
+
+ SHLIB_DOT=
+ # For official cygwin releases, DLLVERSION will be defined in the
+ # environment of configure, and will be incremented any time the API
+ # changes in a non-backwards compatible manner. Otherwise, it is just
+ # SHLIB_MAJOR.
+ if [ -n "$DLLVERSION" ] ; then
+ SHLIB_DLLVERSION="$DLLVERSION"
+ fi
+ ;;
+
+#
+# Rely on correct gcc configuration for everything else
+#
+*-*gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+esac
+
+echo SHOBJ_CC=\'"$SHOBJ_CC"\'
+echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\'
+echo SHOBJ_LD=\'"$SHOBJ_LD"\'
+echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\'
+echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\'
+echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\'
+
+echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\'
+echo SHLIB_LIBS=\'"$SHLIB_LIBS"\'
+
+echo SHLIB_DOT=\'"$SHLIB_DOT"\'
+
+echo SHLIB_LIBPREF=\'"$SHLIB_LIBPREF"\'
+echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\'
+
+echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\'
+echo SHLIB_DLLVERSION=\'"$SHLIB_DLLVERSION"\'
+
+echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\'
+echo SHLIB_STATUS=\'"$SHLIB_STATUS"\'
+
+exit 0
shobj-conf
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: mkdirs
===================================================================
--- mkdirs (nonexistent)
+++ mkdirs (revision 33)
@@ -0,0 +1,48 @@
+#! /bin/sh
+#
+# mkdirs - a work-alike for `mkdir -p'
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA.
+
+for dir
+do
+
+ test -d "$dir" && continue
+
+ tomake=$dir
+ while test -n "$dir" ; do
+ # dir=${dir%/*}
+ # dir=`expr "$dir" ':' '\(/.*\)/[^/]*'`
+ if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then
+ tomake="$dir $tomake"
+ else
+ dir=
+ fi
+ done
+
+ for d in $tomake
+ do
+ test -d "$d" && continue
+ echo mkdir "$d"
+ mkdir "$d"
+ done
+done
+
+exit 0
mkdirs
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: wcwidth.c
===================================================================
--- wcwidth.c (nonexistent)
+++ wcwidth.c (revision 33)
@@ -0,0 +1,236 @@
+/*
+ * This is an implementation of wcwidth() and wcswidth() as defined in
+ * "The Single UNIX Specification, Version 2, The Open Group, 1997"
+ *
+ *
+ * Markus Kuhn -- 2001-09-08 -- public domain
+ */
+
+#include
+
+struct interval {
+ unsigned short first;
+ unsigned short last;
+};
+
+/* auxiliary function for binary search in interval table */
+static int bisearch(wchar_t ucs, const struct interval *table, int max) {
+ int min = 0;
+ int mid;
+
+ if (ucs < table[0].first || ucs > table[max].last)
+ return 0;
+ while (max >= min) {
+ mid = (min + max) / 2;
+ if (ucs > table[mid].last)
+ min = mid + 1;
+ else if (ucs < table[mid].first)
+ max = mid - 1;
+ else
+ return 1;
+ }
+
+ return 0;
+}
+
+
+/* The following functions define the column width of an ISO 10646
+ * character as follows:
+ *
+ * - The null character (U+0000) has a column width of 0.
+ *
+ * - Other C0/C1 control characters and DEL will lead to a return
+ * value of -1.
+ *
+ * - Non-spacing and enclosing combining characters (general
+ * category code Mn or Me in the Unicode database) have a
+ * column width of 0.
+ *
+ * - Other format characters (general category code Cf in the Unicode
+ * database) and ZERO WIDTH SPACE (U+200B) have a column width of 0.
+ *
+ * - Hangul Jamo medial vowels and final consonants (U+1160-U+11FF)
+ * have a column width of 0.
+ *
+ * - Spacing characters in the East Asian Wide (W) or East Asian
+ * FullWidth (F) category as defined in Unicode Technical
+ * Report #11 have a column width of 2.
+ *
+ * - All remaining characters (including all printable
+ * ISO 8859-1 and WGL4 characters, Unicode control characters,
+ * etc.) have a column width of 1.
+ *
+ * This implementation assumes that wchar_t characters are encoded
+ * in ISO 10646.
+ */
+
+int wcwidth(wchar_t ucs)
+{
+ /* sorted list of non-overlapping intervals of non-spacing characters */
+ static const struct interval combining[] = {
+ { 0x0300, 0x034E }, { 0x0360, 0x0362 }, { 0x0483, 0x0486 },
+ { 0x0488, 0x0489 }, { 0x0591, 0x05A1 }, { 0x05A3, 0x05B9 },
+ { 0x05BB, 0x05BD }, { 0x05BF, 0x05BF }, { 0x05C1, 0x05C2 },
+ { 0x05C4, 0x05C4 }, { 0x064B, 0x0655 }, { 0x0670, 0x0670 },
+ { 0x06D6, 0x06E4 }, { 0x06E7, 0x06E8 }, { 0x06EA, 0x06ED },
+ { 0x070F, 0x070F }, { 0x0711, 0x0711 }, { 0x0730, 0x074A },
+ { 0x07A6, 0x07B0 }, { 0x0901, 0x0902 }, { 0x093C, 0x093C },
+ { 0x0941, 0x0948 }, { 0x094D, 0x094D }, { 0x0951, 0x0954 },
+ { 0x0962, 0x0963 }, { 0x0981, 0x0981 }, { 0x09BC, 0x09BC },
+ { 0x09C1, 0x09C4 }, { 0x09CD, 0x09CD }, { 0x09E2, 0x09E3 },
+ { 0x0A02, 0x0A02 }, { 0x0A3C, 0x0A3C }, { 0x0A41, 0x0A42 },
+ { 0x0A47, 0x0A48 }, { 0x0A4B, 0x0A4D }, { 0x0A70, 0x0A71 },
+ { 0x0A81, 0x0A82 }, { 0x0ABC, 0x0ABC }, { 0x0AC1, 0x0AC5 },
+ { 0x0AC7, 0x0AC8 }, { 0x0ACD, 0x0ACD }, { 0x0B01, 0x0B01 },
+ { 0x0B3C, 0x0B3C }, { 0x0B3F, 0x0B3F }, { 0x0B41, 0x0B43 },
+ { 0x0B4D, 0x0B4D }, { 0x0B56, 0x0B56 }, { 0x0B82, 0x0B82 },
+ { 0x0BC0, 0x0BC0 }, { 0x0BCD, 0x0BCD }, { 0x0C3E, 0x0C40 },
+ { 0x0C46, 0x0C48 }, { 0x0C4A, 0x0C4D }, { 0x0C55, 0x0C56 },
+ { 0x0CBF, 0x0CBF }, { 0x0CC6, 0x0CC6 }, { 0x0CCC, 0x0CCD },
+ { 0x0D41, 0x0D43 }, { 0x0D4D, 0x0D4D }, { 0x0DCA, 0x0DCA },
+ { 0x0DD2, 0x0DD4 }, { 0x0DD6, 0x0DD6 }, { 0x0E31, 0x0E31 },
+ { 0x0E34, 0x0E3A }, { 0x0E47, 0x0E4E }, { 0x0EB1, 0x0EB1 },
+ { 0x0EB4, 0x0EB9 }, { 0x0EBB, 0x0EBC }, { 0x0EC8, 0x0ECD },
+ { 0x0F18, 0x0F19 }, { 0x0F35, 0x0F35 }, { 0x0F37, 0x0F37 },
+ { 0x0F39, 0x0F39 }, { 0x0F71, 0x0F7E }, { 0x0F80, 0x0F84 },
+ { 0x0F86, 0x0F87 }, { 0x0F90, 0x0F97 }, { 0x0F99, 0x0FBC },
+ { 0x0FC6, 0x0FC6 }, { 0x102D, 0x1030 }, { 0x1032, 0x1032 },
+ { 0x1036, 0x1037 }, { 0x1039, 0x1039 }, { 0x1058, 0x1059 },
+ { 0x1160, 0x11FF }, { 0x17B7, 0x17BD }, { 0x17C6, 0x17C6 },
+ { 0x17C9, 0x17D3 }, { 0x180B, 0x180E }, { 0x18A9, 0x18A9 },
+ { 0x200B, 0x200F }, { 0x202A, 0x202E }, { 0x206A, 0x206F },
+ { 0x20D0, 0x20E3 }, { 0x302A, 0x302F }, { 0x3099, 0x309A },
+ { 0xFB1E, 0xFB1E }, { 0xFE20, 0xFE23 }, { 0xFEFF, 0xFEFF },
+ { 0xFFF9, 0xFFFB }
+ };
+
+ /* test for 8-bit control characters */
+ if (ucs == 0)
+ return 0;
+ if (ucs < 32 || (ucs >= 0x7f && ucs < 0xa0))
+ return -1;
+
+ /* binary search in table of non-spacing characters */
+ if (bisearch(ucs, combining,
+ sizeof(combining) / sizeof(struct interval) - 1))
+ return 0;
+
+ /* if we arrive here, ucs is not a combining or C0/C1 control character */
+
+ return 1 +
+ (ucs >= 0x1100 &&
+ (ucs <= 0x115f || /* Hangul Jamo init. consonants */
+ (ucs >= 0x2e80 && ucs <= 0xa4cf && (ucs & ~0x0011) != 0x300a &&
+ ucs != 0x303f) || /* CJK ... Yi */
+ (ucs >= 0xac00 && ucs <= 0xd7a3) || /* Hangul Syllables */
+ (ucs >= 0xf900 && ucs <= 0xfaff) || /* CJK Compatibility Ideographs */
+ (ucs >= 0xfe30 && ucs <= 0xfe6f) || /* CJK Compatibility Forms */
+ (ucs >= 0xff00 && ucs <= 0xff5f) || /* Fullwidth Forms */
+ (ucs >= 0xffe0 && ucs <= 0xffe6) ||
+ (ucs >= 0x20000 && ucs <= 0x2ffff)));
+}
+
+
+int wcswidth(const wchar_t *pwcs, size_t n)
+{
+ int w, width = 0;
+
+ for (;*pwcs && n-- > 0; pwcs++)
+ if ((w = wcwidth(*pwcs)) < 0)
+ return -1;
+ else
+ width += w;
+
+ return width;
+}
+
+
+/*
+ * The following function is the same as wcwidth(), except that
+ * spacing characters in the East Asian Ambiguous (A) category as
+ * defined in Unicode Technical Report #11 have a column width of 2.
+ * This experimental variant might be useful for users of CJK legacy
+ * encodings who want to migrate to UCS. It is not otherwise
+ * recommended for general use.
+ */
+static int wcwidth_cjk(wchar_t ucs)
+{
+ /* sorted list of non-overlapping intervals of East Asian Ambiguous
+ * characters */
+ static const struct interval ambiguous[] = {
+ { 0x00A1, 0x00A1 }, { 0x00A4, 0x00A4 }, { 0x00A7, 0x00A8 },
+ { 0x00AA, 0x00AA }, { 0x00AD, 0x00AE }, { 0x00B0, 0x00B4 },
+ { 0x00B6, 0x00BA }, { 0x00BC, 0x00BF }, { 0x00C6, 0x00C6 },
+ { 0x00D0, 0x00D0 }, { 0x00D7, 0x00D8 }, { 0x00DE, 0x00E1 },
+ { 0x00E6, 0x00E6 }, { 0x00E8, 0x00EA }, { 0x00EC, 0x00ED },
+ { 0x00F0, 0x00F0 }, { 0x00F2, 0x00F3 }, { 0x00F7, 0x00FA },
+ { 0x00FC, 0x00FC }, { 0x00FE, 0x00FE }, { 0x0101, 0x0101 },
+ { 0x0111, 0x0111 }, { 0x0113, 0x0113 }, { 0x011B, 0x011B },
+ { 0x0126, 0x0127 }, { 0x012B, 0x012B }, { 0x0131, 0x0133 },
+ { 0x0138, 0x0138 }, { 0x013F, 0x0142 }, { 0x0144, 0x0144 },
+ { 0x0148, 0x014B }, { 0x014D, 0x014D }, { 0x0152, 0x0153 },
+ { 0x0166, 0x0167 }, { 0x016B, 0x016B }, { 0x01CE, 0x01CE },
+ { 0x01D0, 0x01D0 }, { 0x01D2, 0x01D2 }, { 0x01D4, 0x01D4 },
+ { 0x01D6, 0x01D6 }, { 0x01D8, 0x01D8 }, { 0x01DA, 0x01DA },
+ { 0x01DC, 0x01DC }, { 0x0251, 0x0251 }, { 0x0261, 0x0261 },
+ { 0x02C4, 0x02C4 }, { 0x02C7, 0x02C7 }, { 0x02C9, 0x02CB },
+ { 0x02CD, 0x02CD }, { 0x02D0, 0x02D0 }, { 0x02D8, 0x02DB },
+ { 0x02DD, 0x02DD }, { 0x02DF, 0x02DF }, { 0x0300, 0x034E },
+ { 0x0360, 0x0362 }, { 0x0391, 0x03A1 }, { 0x03A3, 0x03A9 },
+ { 0x03B1, 0x03C1 }, { 0x03C3, 0x03C9 }, { 0x0401, 0x0401 },
+ { 0x0410, 0x044F }, { 0x0451, 0x0451 }, { 0x2010, 0x2010 },
+ { 0x2013, 0x2016 }, { 0x2018, 0x2019 }, { 0x201C, 0x201D },
+ { 0x2020, 0x2022 }, { 0x2024, 0x2027 }, { 0x2030, 0x2030 },
+ { 0x2032, 0x2033 }, { 0x2035, 0x2035 }, { 0x203B, 0x203B },
+ { 0x203E, 0x203E }, { 0x2074, 0x2074 }, { 0x207F, 0x207F },
+ { 0x2081, 0x2084 }, { 0x20AC, 0x20AC }, { 0x2103, 0x2103 },
+ { 0x2105, 0x2105 }, { 0x2109, 0x2109 }, { 0x2113, 0x2113 },
+ { 0x2116, 0x2116 }, { 0x2121, 0x2122 }, { 0x2126, 0x2126 },
+ { 0x212B, 0x212B }, { 0x2153, 0x2155 }, { 0x215B, 0x215E },
+ { 0x2160, 0x216B }, { 0x2170, 0x2179 }, { 0x2190, 0x2199 },
+ { 0x21B8, 0x21B9 }, { 0x21D2, 0x21D2 }, { 0x21D4, 0x21D4 },
+ { 0x21E7, 0x21E7 }, { 0x2200, 0x2200 }, { 0x2202, 0x2203 },
+ { 0x2207, 0x2208 }, { 0x220B, 0x220B }, { 0x220F, 0x220F },
+ { 0x2211, 0x2211 }, { 0x2215, 0x2215 }, { 0x221A, 0x221A },
+ { 0x221D, 0x2220 }, { 0x2223, 0x2223 }, { 0x2225, 0x2225 },
+ { 0x2227, 0x222C }, { 0x222E, 0x222E }, { 0x2234, 0x2237 },
+ { 0x223C, 0x223D }, { 0x2248, 0x2248 }, { 0x224C, 0x224C },
+ { 0x2252, 0x2252 }, { 0x2260, 0x2261 }, { 0x2264, 0x2267 },
+ { 0x226A, 0x226B }, { 0x226E, 0x226F }, { 0x2282, 0x2283 },
+ { 0x2286, 0x2287 }, { 0x2295, 0x2295 }, { 0x2299, 0x2299 },
+ { 0x22A5, 0x22A5 }, { 0x22BF, 0x22BF }, { 0x2312, 0x2312 },
+ { 0x2329, 0x232A }, { 0x2460, 0x24BF }, { 0x24D0, 0x24E9 },
+ { 0x2500, 0x254B }, { 0x2550, 0x2574 }, { 0x2580, 0x258F },
+ { 0x2592, 0x2595 }, { 0x25A0, 0x25A1 }, { 0x25A3, 0x25A9 },
+ { 0x25B2, 0x25B3 }, { 0x25B6, 0x25B7 }, { 0x25BC, 0x25BD },
+ { 0x25C0, 0x25C1 }, { 0x25C6, 0x25C8 }, { 0x25CB, 0x25CB },
+ { 0x25CE, 0x25D1 }, { 0x25E2, 0x25E5 }, { 0x25EF, 0x25EF },
+ { 0x2605, 0x2606 }, { 0x2609, 0x2609 }, { 0x260E, 0x260F },
+ { 0x261C, 0x261C }, { 0x261E, 0x261E }, { 0x2640, 0x2640 },
+ { 0x2642, 0x2642 }, { 0x2660, 0x2661 }, { 0x2663, 0x2665 },
+ { 0x2667, 0x266A }, { 0x266C, 0x266D }, { 0x266F, 0x266F },
+ { 0x273D, 0x273D }, { 0x3008, 0x300B }, { 0x3014, 0x3015 },
+ { 0x3018, 0x301B }, { 0xFFFD, 0xFFFD }
+ };
+
+ /* binary search in table of non-spacing characters */
+ if (bisearch(ucs, ambiguous,
+ sizeof(ambiguous) / sizeof(struct interval) - 1))
+ return 2;
+
+ return wcwidth(ucs);
+}
+
+
+int wcswidth_cjk(const wchar_t *pwcs, size_t n)
+{
+ int w, width = 0;
+
+ for (;*pwcs && n-- > 0; pwcs++)
+ if ((w = wcwidth_cjk(*pwcs)) < 0)
+ return -1;
+ else
+ width += w;
+
+ return width;
+}
wcwidth.c
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: mkdist
===================================================================
--- mkdist (nonexistent)
+++ mkdist (revision 33)
@@ -0,0 +1,120 @@
+#! /bin/bash -
+#
+# mkdist - make a distribution directory from a master manifest file
+#
+# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version
+#
+# SRCDIR defaults to src
+# MANIFEST defaults to $SRCDIR/MANIFEST
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+# Copyright (C) 1996-2002 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA.
+
+SRCDIR=src
+ROOTNAME=bash
+
+usage()
+{
+ echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version 1>&2
+ exit 2
+}
+
+vmsg()
+{
+ if [ -n "$verbose" ]; then
+ echo mkdist: "$@"
+ fi
+}
+
+while getopts m:s:r:v name
+do
+ case $name in
+ m) MANIFEST=$OPTARG ;;
+ s) SRCDIR=$OPTARG ;;
+ r) ROOTNAME=$OPTARG ;;
+ v) verbose=yes ;;
+ ?) usage ;;
+ esac
+done
+
+: ${MANIFEST:=$SRCDIR/MANIFEST}
+
+vmsg using $MANIFEST
+
+shift $(( $OPTIND - 1 ))
+
+if [ $# -lt 1 ]; then
+ usage
+fi
+
+version=$1
+newdir=${ROOTNAME}-$version
+
+vmsg creating distribution for $ROOTNAME version $version in $newdir
+
+if [ ! -d $newdir ]; then
+ mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; }
+fi
+
+dirmode=755
+filmode=644
+
+while read fname type mode
+do
+ [ -z "$fname" ] && continue
+
+ case "$fname" in
+ \#*) continue ;;
+ esac
+
+ case "$type" in
+ d) mkdir $newdir/$fname ;;
+ f) cp -p $SRCDIR/$fname $newdir/$fname ;;
+ s) ln -s $mode $newdir/$fname ; mode= ;; # symlink
+ l) ln $mode $newdir/$fname ; mode= ;; # hard link
+ *) echo "unknown file type $type" 1>&2 ;;
+ esac
+
+ if [ -n "$mode" ]; then
+ chmod $mode $newdir/$fname
+ fi
+
+done < $MANIFEST
+
+# cut off the `-alpha' in something like `2.0-alpha', leaving just the
+# numeric version
+#version=${version%%-*}
+
+#case "$version" in
+#*.*.*) vers=${version%.*} ;;
+#*.*) vers=${version} ;;
+#esac
+
+#echo $vers > $newdir/.distribution
+
+#case "$version" in
+#*.*.*) plevel=${version##*.} ;;
+#*) plevel=0 ;;
+#esac
+#[ -z "$plevel" ] && plevel=0
+#echo ${plevel} > $newdir/.patchlevel
+
+vmsg $newdir created
+
+exit 0
mkdist
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property