URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/tags/gnu-src/newlib-1.18.0/newlib-1.18.0-or32-1.0rc2/newlib/doc
- from Rev 207 to Rev 520
- ↔ Reverse comparison
Rev 207 → Rev 520
/configure
>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
+$as_echo "$as_me: error: could not setup config files machinery" >&2;}
+ { (exit 1); exit 1; }; }
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+
+eval set X " :F $CONFIG_FILES :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
+$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
+ { (exit 1); exit 1; }; };;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ ac_file_inputs="$ac_file_inputs '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; } ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir="$ac_dir"
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
+$as_echo "$as_me: error: could not create $ac_file" >&2;}
+ { (exit 1); exit 1; }; }
+ ;;
+
+
+ :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { as_dir=$dirpart/$fdir
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
+ { (exit 1); exit 1; }; }; }
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+ ;;
+
+ esac
+done # for ac_tag
+
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
0,0 → 1,5029
+'
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+ { (exit 1); exit 1; }; }
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' #! /bin/sh |
# Guess values for system-dependent variables and create Makefiles. |
# Generated by GNU Autoconf 2.63 for newlib 1.18.0. |
# |
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. |
# This configure script is free software; the Free Software Foundation |
# gives unlimited permission to copy, distribute and modify it. |
## --------------------- ## |
## M4sh Initialization. ## |
## --------------------- ## |
|
# Be more Bourne compatible |
DUALCASE=1; export DUALCASE # for MKS sh |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
setopt NO_GLOB_SUBST |
else |
case `(set -o) 2>/dev/null` in |
*posix*) set -o posix ;; |
esac |
|
fi |
|
|
|
|
# PATH needs CR |
# Avoid depending upon Character Ranges. |
as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
as_cr_digits='0123456789' |
as_cr_alnum=$as_cr_Letters$as_cr_digits |
|
as_nl=' |
' |
export as_nl |
# Printing a long string crashes Solaris 7 /usr/bin/printf. |
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo |
if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then |
as_echo='printf %s\n' |
as_echo_n='printf %s' |
else |
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then |
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' |
as_echo_n='/usr/ucb/echo -n' |
else |
as_echo_body='eval expr "X$1" : "X\\(.*\\)"' |
as_echo_n_body='eval |
arg=$1; |
case $arg in |
*"$as_nl"*) |
expr "X$arg" : "X\\(.*\\)$as_nl"; |
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; |
esac; |
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" |
' |
export as_echo_n_body |
as_echo_n='sh -c $as_echo_n_body as_echo' |
fi |
export as_echo_body |
as_echo='sh -c $as_echo_body as_echo' |
fi |
|
# The user is always right. |
if test "${PATH_SEPARATOR+set}" != set; then |
PATH_SEPARATOR=: |
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { |
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || |
PATH_SEPARATOR=';' |
} |
fi |
|
# Support unset when possible. |
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
as_unset=unset |
else |
as_unset=false |
fi |
|
|
# IFS |
# We need space, tab and new line, in precisely that order. Quoting is |
# there to prevent editors from complaining about space-tab. |
# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
# splitting by setting IFS to empty value.) |
IFS=" "" $as_nl" |
|
# Find who we are. Look in the path if we contain no directory separator. |
case $0 in |
*[\\/]* ) as_myself=$0 ;; |
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
done |
IFS=$as_save_IFS |
|
;; |
esac |
# We did not find ourselves, most probably we were run as `sh COMMAND' |
# in which case we are not to be found in the path. |
if test "x$as_myself" = x; then |
as_myself=$0 |
fi |
if test ! -f "$as_myself"; then |
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
{ (exit 1); exit 1; } |
fi |
|
# Work around bugs in pre-3.0 UWIN ksh. |
for as_var in ENV MAIL MAILPATH |
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
done |
PS1='$ ' |
PS2='> ' |
PS4='+ ' |
|
# NLS nuisances. |
LC_ALL=C |
export LC_ALL |
LANGUAGE=C |
export LANGUAGE |
|
# Required to use basename. |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
as_basename=basename |
else |
as_basename=false |
fi |
|
|
# Name of the executable. |
as_me=`$as_basename -- "$0" || |
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)' \| . 2>/dev/null || |
$as_echo X/"$0" | |
sed '/^.*\/\([^/][^/]*\)\/*$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\/\)$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\).*/{ |
s//\1/ |
q |
} |
s/.*/./; q'` |
|
# CDPATH. |
$as_unset CDPATH |
|
|
if test "x$CONFIG_SHELL" = x; then |
if (eval ":") 2>/dev/null; then |
as_have_required=yes |
else |
as_have_required=no |
fi |
|
if test $as_have_required = yes && (eval ": |
(as_func_return () { |
(exit \$1) |
} |
as_func_success () { |
as_func_return 0 |
} |
as_func_failure () { |
as_func_return 1 |
} |
as_func_ret_success () { |
return 0 |
} |
as_func_ret_failure () { |
return 1 |
} |
|
exitcode=0 |
if as_func_success; then |
: |
else |
exitcode=1 |
echo as_func_success failed. |
fi |
|
if as_func_failure; then |
exitcode=1 |
echo as_func_failure succeeded. |
fi |
|
if as_func_ret_success; then |
: |
else |
exitcode=1 |
echo as_func_ret_success failed. |
fi |
|
if as_func_ret_failure; then |
exitcode=1 |
echo as_func_ret_failure succeeded. |
fi |
|
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
: |
else |
exitcode=1 |
echo positional parameters were not saved. |
fi |
|
test \$exitcode = 0) || { (exit 1); exit 1; } |
|
( |
as_lineno_1=\$LINENO |
as_lineno_2=\$LINENO |
test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && |
test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } |
") 2> /dev/null; then |
: |
else |
as_candidate_shells= |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
case $as_dir in |
/*) |
for as_base in sh bash ksh sh5; do |
as_candidate_shells="$as_candidate_shells $as_dir/$as_base" |
done;; |
esac |
done |
IFS=$as_save_IFS |
|
|
for as_shell in $as_candidate_shells $SHELL; do |
# Try only shells that exist, to save several forks. |
if { test -f "$as_shell" || test -f "$as_shell.exe"; } && |
{ ("$as_shell") 2> /dev/null <<\_ASEOF |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
setopt NO_GLOB_SUBST |
else |
case `(set -o) 2>/dev/null` in |
*posix*) set -o posix ;; |
esac |
|
fi |
|
|
: |
_ASEOF |
}; then |
CONFIG_SHELL=$as_shell |
as_have_required=yes |
if { "$as_shell" 2> /dev/null <<\_ASEOF |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
setopt NO_GLOB_SUBST |
else |
case `(set -o) 2>/dev/null` in |
*posix*) set -o posix ;; |
esac |
|
fi |
|
|
: |
(as_func_return () { |
(exit $1) |
} |
as_func_success () { |
as_func_return 0 |
} |
as_func_failure () { |
as_func_return 1 |
} |
as_func_ret_success () { |
return 0 |
} |
as_func_ret_failure () { |
return 1 |
} |
|
exitcode=0 |
if as_func_success; then |
: |
else |
exitcode=1 |
echo as_func_success failed. |
fi |
|
if as_func_failure; then |
exitcode=1 |
echo as_func_failure succeeded. |
fi |
|
if as_func_ret_success; then |
: |
else |
exitcode=1 |
echo as_func_ret_success failed. |
fi |
|
if as_func_ret_failure; then |
exitcode=1 |
echo as_func_ret_failure succeeded. |
fi |
|
if ( set x; as_func_ret_success y && test x = "$1" ); then |
: |
else |
exitcode=1 |
echo positional parameters were not saved. |
fi |
|
test $exitcode = 0) || { (exit 1); exit 1; } |
|
( |
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } |
|
_ASEOF |
}; then |
break |
fi |
|
fi |
|
done |
|
if test "x$CONFIG_SHELL" != x; then |
for as_var in BASH_ENV ENV |
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
done |
export CONFIG_SHELL |
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} |
fi |
|
|
if test $as_have_required = no; then |
echo This script requires a shell more modern than all the |
echo shells that I found on your system. Please install a |
echo modern shell, or manually run the script under such a |
echo shell if you do have one. |
{ (exit 1); exit 1; } |
fi |
|
|
fi |
|
fi |
|
|
|
(eval "as_func_return () { |
(exit \$1) |
} |
as_func_success () { |
as_func_return 0 |
} |
as_func_failure () { |
as_func_return 1 |
} |
as_func_ret_success () { |
return 0 |
} |
as_func_ret_failure () { |
return 1 |
} |
|
exitcode=0 |
if as_func_success; then |
: |
else |
exitcode=1 |
echo as_func_success failed. |
fi |
|
if as_func_failure; then |
exitcode=1 |
echo as_func_failure succeeded. |
fi |
|
if as_func_ret_success; then |
: |
else |
exitcode=1 |
echo as_func_ret_success failed. |
fi |
|
if as_func_ret_failure; then |
exitcode=1 |
echo as_func_ret_failure succeeded. |
fi |
|
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then |
: |
else |
exitcode=1 |
echo positional parameters were not saved. |
fi |
|
test \$exitcode = 0") || { |
echo No shell found that supports shell functions. |
echo Please tell bug-autoconf@gnu.org about your system, |
echo including any error possibly output before this message. |
echo This can help us improve future autoconf versions. |
echo Configuration will now proceed without shell functions. |
} |
|
|
|
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
|
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
# uniformly replaced by the line number. The first 'sed' inserts a |
# line-number line after each line using $LINENO; the second 'sed' |
# does the real work. The second script uses 'N' to pair each |
# line-number line with the line containing $LINENO, and appends |
# trailing '-' during substitution so that $LINENO is not a special |
# case at line end. |
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
# scripts with optimization help from Paolo Bonzini. Blame Lee |
# E. McMahon (1931-1989) for sed's syntax. :-) |
sed -n ' |
p |
/[$]LINENO/= |
' <$as_myself | |
sed ' |
s/[$]LINENO.*/&-/ |
t lineno |
b |
:lineno |
N |
:loop |
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
t loop |
s/-\n.*// |
' >$as_me.lineno && |
chmod +x "$as_me.lineno" || |
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
{ (exit 1); exit 1; }; } |
|
# Don't try to exec as it changes $[0], causing all sort of problems |
# (the dirname of $[0] is not the place where we might find the |
# original and so on. Autoconf is especially sensitive to this). |
. "./$as_me.lineno" |
# Exit status is that of the last command. |
exit |
} |
|
|
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
as_dirname=dirname |
else |
as_dirname=false |
fi |
|
ECHO_C= ECHO_N= ECHO_T= |
case `echo -n x` in |
-n*) |
case `echo 'x\c'` in |
*c*) ECHO_T=' ';; # ECHO_T is single tab character. |
*) ECHO_C='\c';; |
esac;; |
*) |
ECHO_N='-n';; |
esac |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
rm -f conf$$ conf$$.exe conf$$.file |
if test -d conf$$.dir; then |
rm -f conf$$.dir/conf$$.file |
else |
rm -f conf$$.dir |
mkdir conf$$.dir 2>/dev/null |
fi |
if (echo >conf$$.file) 2>/dev/null; then |
if ln -s conf$$.file conf$$ 2>/dev/null; then |
as_ln_s='ln -s' |
# ... but there are two gotchas: |
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
# In both cases, we have to default to `cp -p'. |
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
as_ln_s='cp -p' |
elif ln conf$$.file conf$$ 2>/dev/null; then |
as_ln_s=ln |
else |
as_ln_s='cp -p' |
fi |
else |
as_ln_s='cp -p' |
fi |
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
rmdir conf$$.dir 2>/dev/null |
|
if mkdir -p . 2>/dev/null; then |
as_mkdir_p=: |
else |
test -d ./-p && rmdir ./-p |
as_mkdir_p=false |
fi |
|
if test -x / >/dev/null 2>&1; then |
as_test_x='test -x' |
else |
if ls -dL / >/dev/null 2>&1; then |
as_ls_L_option=L |
else |
as_ls_L_option= |
fi |
as_test_x=' |
eval sh -c '\'' |
if test -d "$1"; then |
test -d "$1/."; |
else |
case $1 in |
-*)set "./$1";; |
esac; |
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
???[sx]*):;;*)false;;esac;fi |
'\'' sh |
' |
fi |
as_executable_p=$as_test_x |
|
# Sed expression to map a string onto a valid CPP name. |
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
|
# Sed expression to map a string onto a valid variable name. |
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
|
|
|
exec 7<&0 </dev/null 6>&1 |
|
# Name of the host. |
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
# so uname gets run too. |
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
|
# |
# Initializations. |
# |
ac_default_prefix=/usr/local |
ac_clean_files= |
ac_config_libobj_dir=. |
LIBOBJS= |
cross_compiling=no |
subdirs= |
MFLAGS= |
MAKEFLAGS= |
SHELL=${CONFIG_SHELL-/bin/sh} |
|
# Identity of this package. |
PACKAGE_NAME='newlib' |
PACKAGE_TARNAME='newlib' |
PACKAGE_VERSION='1.18.0' |
PACKAGE_STRING='newlib 1.18.0' |
PACKAGE_BUGREPORT='' |
|
ac_unique_file="makedoc.c" |
ac_subst_vars='LTLIBOBJS |
LIBOBJS |
EXEEXT_FOR_BUILD |
CC_FOR_BUILD |
sys_dir |
machine_dir |
libm_machine_dir |
lpfx |
aext |
oext |
OBJEXT |
USE_LIBTOOL_FALSE |
USE_LIBTOOL_TRUE |
ELIX_LEVEL_4_FALSE |
ELIX_LEVEL_4_TRUE |
ELIX_LEVEL_3_FALSE |
ELIX_LEVEL_3_TRUE |
ELIX_LEVEL_2_FALSE |
ELIX_LEVEL_2_TRUE |
ELIX_LEVEL_1_FALSE |
ELIX_LEVEL_1_TRUE |
ELIX_LEVEL_0_FALSE |
ELIX_LEVEL_0_TRUE |
LDFLAGS |
NEWLIB_CFLAGS |
CCASFLAGS |
CCAS |
MAINT |
MAINTAINER_MODE_FALSE |
MAINTAINER_MODE_TRUE |
READELF |
RANLIB |
AR |
AS |
am__fastdepCC_FALSE |
am__fastdepCC_TRUE |
CCDEPMODE |
AMDEPBACKSLASH |
AMDEP_FALSE |
AMDEP_TRUE |
am__quote |
am__include |
DEPDIR |
CC |
am__untar |
am__tar |
AMTAR |
am__leading_dot |
SET_MAKE |
AWK |
mkdir_p |
MKDIR_P |
INSTALL_STRIP_PROGRAM |
STRIP |
install_sh |
MAKEINFO |
AUTOHEADER |
AUTOMAKE |
AUTOCONF |
ACLOCAL |
VERSION |
PACKAGE |
CYGPATH_W |
am__isrc |
INSTALL_DATA |
INSTALL_SCRIPT |
INSTALL_PROGRAM |
host_os |
host_vendor |
host_cpu |
host |
build_os |
build_vendor |
build_cpu |
build |
newlib_basedir |
MAY_SUPPLY_SYSCALLS_FALSE |
MAY_SUPPLY_SYSCALLS_TRUE |
target_alias |
host_alias |
build_alias |
LIBS |
ECHO_T |
ECHO_N |
ECHO_C |
DEFS |
mandir |
localedir |
libdir |
psdir |
pdfdir |
dvidir |
htmldir |
infodir |
docdir |
oldincludedir |
includedir |
localstatedir |
sharedstatedir |
sysconfdir |
datadir |
datarootdir |
libexecdir |
sbindir |
bindir |
program_transform_name |
prefix |
exec_prefix |
PACKAGE_BUGREPORT |
PACKAGE_STRING |
PACKAGE_VERSION |
PACKAGE_TARNAME |
PACKAGE_NAME |
PATH_SEPARATOR |
SHELL' |
ac_subst_files='' |
ac_user_opts=' |
enable_option_checking |
enable_multilib |
enable_target_optspace |
enable_malloc_debugging |
enable_newlib_multithread |
enable_newlib_iconv |
enable_newlib_elix_level |
enable_newlib_io_float |
enable_newlib_supplied_syscalls |
enable_dependency_tracking |
enable_maintainer_mode |
' |
ac_precious_vars='build_alias |
host_alias |
target_alias |
CCAS |
CCASFLAGS' |
|
|
# Initialize some variables set by options. |
ac_init_help= |
ac_init_version=false |
ac_unrecognized_opts= |
ac_unrecognized_sep= |
# The variables have the same names as the options, with |
# dashes changed to underlines. |
cache_file=/dev/null |
exec_prefix=NONE |
no_create= |
no_recursion= |
prefix=NONE |
program_prefix=NONE |
program_suffix=NONE |
program_transform_name=s,x,x, |
silent= |
site= |
srcdir= |
verbose= |
x_includes=NONE |
x_libraries=NONE |
|
# Installation directory options. |
# These are left unexpanded so users can "make install exec_prefix=/foo" |
# and all the variables that are supposed to be based on exec_prefix |
# by default will actually change. |
# Use braces instead of parens because sh, perl, etc. also accept them. |
# (The list follows the same order as the GNU Coding Standards.) |
bindir='${exec_prefix}/bin' |
sbindir='${exec_prefix}/sbin' |
libexecdir='${exec_prefix}/libexec' |
datarootdir='${prefix}/share' |
datadir='${datarootdir}' |
sysconfdir='${prefix}/etc' |
sharedstatedir='${prefix}/com' |
localstatedir='${prefix}/var' |
includedir='${prefix}/include' |
oldincludedir='/usr/include' |
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' |
infodir='${datarootdir}/info' |
htmldir='${docdir}' |
dvidir='${docdir}' |
pdfdir='${docdir}' |
psdir='${docdir}' |
libdir='${exec_prefix}/lib' |
localedir='${datarootdir}/locale' |
mandir='${datarootdir}/man' |
|
ac_prev= |
ac_dashdash= |
for ac_option |
do |
# If the previous option needs an argument, assign it. |
if test -n "$ac_prev"; then |
eval $ac_prev=\$ac_option |
ac_prev= |
continue |
fi |
|
case $ac_option in |
*=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; |
*) ac_optarg=yes ;; |
esac |
|
# Accept the important Cygnus configure options, so we can diagnose typos. |
|
case $ac_dashdash$ac_option in |
--) |
ac_dashdash=yes ;; |
|
-bindir | --bindir | --bindi | --bind | --bin | --bi) |
ac_prev=bindir ;; |
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
bindir=$ac_optarg ;; |
|
-build | --build | --buil | --bui | --bu) |
ac_prev=build_alias ;; |
-build=* | --build=* | --buil=* | --bui=* | --bu=*) |
build_alias=$ac_optarg ;; |
|
-cache-file | --cache-file | --cache-fil | --cache-fi \ |
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
ac_prev=cache_file ;; |
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
cache_file=$ac_optarg ;; |
|
--config-cache | -C) |
cache_file=config.cache ;; |
|
-datadir | --datadir | --datadi | --datad) |
ac_prev=datadir ;; |
-datadir=* | --datadir=* | --datadi=* | --datad=*) |
datadir=$ac_optarg ;; |
|
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ |
| --dataroo | --dataro | --datar) |
ac_prev=datarootdir ;; |
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ |
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*) |
datarootdir=$ac_optarg ;; |
|
-disable-* | --disable-*) |
ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && |
{ $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 |
{ (exit 1); exit 1; }; } |
ac_useropt_orig=$ac_useropt |
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` |
case $ac_user_opts in |
*" |
"enable_$ac_useropt" |
"*) ;; |
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" |
ac_unrecognized_sep=', ';; |
esac |
eval enable_$ac_useropt=no ;; |
|
-docdir | --docdir | --docdi | --doc | --do) |
ac_prev=docdir ;; |
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) |
docdir=$ac_optarg ;; |
|
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) |
ac_prev=dvidir ;; |
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) |
dvidir=$ac_optarg ;; |
|
-enable-* | --enable-*) |
ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && |
{ $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 |
{ (exit 1); exit 1; }; } |
ac_useropt_orig=$ac_useropt |
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` |
case $ac_user_opts in |
*" |
"enable_$ac_useropt" |
"*) ;; |
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" |
ac_unrecognized_sep=', ';; |
esac |
eval enable_$ac_useropt=\$ac_optarg ;; |
|
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| --exec | --exe | --ex) |
ac_prev=exec_prefix ;; |
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| --exec=* | --exe=* | --ex=*) |
exec_prefix=$ac_optarg ;; |
|
-gas | --gas | --ga | --g) |
# Obsolete; use --with-gas. |
with_gas=yes ;; |
|
-help | --help | --hel | --he | -h) |
ac_init_help=long ;; |
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*) |
ac_init_help=recursive ;; |
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*) |
ac_init_help=short ;; |
|
-host | --host | --hos | --ho) |
ac_prev=host_alias ;; |
-host=* | --host=* | --hos=* | --ho=*) |
host_alias=$ac_optarg ;; |
|
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) |
ac_prev=htmldir ;; |
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ |
| --ht=*) |
htmldir=$ac_optarg ;; |
|
-includedir | --includedir | --includedi | --included | --include \ |
| --includ | --inclu | --incl | --inc) |
ac_prev=includedir ;; |
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| --includ=* | --inclu=* | --incl=* | --inc=*) |
includedir=$ac_optarg ;; |
|
-infodir | --infodir | --infodi | --infod | --info | --inf) |
ac_prev=infodir ;; |
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
infodir=$ac_optarg ;; |
|
-libdir | --libdir | --libdi | --libd) |
ac_prev=libdir ;; |
-libdir=* | --libdir=* | --libdi=* | --libd=*) |
libdir=$ac_optarg ;; |
|
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| --libexe | --libex | --libe) |
ac_prev=libexecdir ;; |
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| --libexe=* | --libex=* | --libe=*) |
libexecdir=$ac_optarg ;; |
|
-localedir | --localedir | --localedi | --localed | --locale) |
ac_prev=localedir ;; |
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) |
localedir=$ac_optarg ;; |
|
-localstatedir | --localstatedir | --localstatedi | --localstated \ |
| --localstate | --localstat | --localsta | --localst | --locals) |
ac_prev=localstatedir ;; |
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) |
localstatedir=$ac_optarg ;; |
|
-mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
ac_prev=mandir ;; |
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
mandir=$ac_optarg ;; |
|
-nfp | --nfp | --nf) |
# Obsolete; use --without-fp. |
with_fp=no ;; |
|
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c | -n) |
no_create=yes ;; |
|
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
no_recursion=yes ;; |
|
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| --oldin | --oldi | --old | --ol | --o) |
ac_prev=oldincludedir ;; |
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
oldincludedir=$ac_optarg ;; |
|
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
ac_prev=prefix ;; |
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
prefix=$ac_optarg ;; |
|
-program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| --program-pre | --program-pr | --program-p) |
ac_prev=program_prefix ;; |
-program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
program_prefix=$ac_optarg ;; |
|
-program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| --program-suf | --program-su | --program-s) |
ac_prev=program_suffix ;; |
-program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
program_suffix=$ac_optarg ;; |
|
-program-transform-name | --program-transform-name \ |
| --program-transform-nam | --program-transform-na \ |
| --program-transform-n | --program-transform- \ |
| --program-transform | --program-transfor \ |
| --program-transfo | --program-transf \ |
| --program-trans | --program-tran \ |
| --progr-tra | --program-tr | --program-t) |
ac_prev=program_transform_name ;; |
-program-transform-name=* | --program-transform-name=* \ |
| --program-transform-nam=* | --program-transform-na=* \ |
| --program-transform-n=* | --program-transform-=* \ |
| --program-transform=* | --program-transfor=* \ |
| --program-transfo=* | --program-transf=* \ |
| --program-trans=* | --program-tran=* \ |
| --progr-tra=* | --program-tr=* | --program-t=*) |
program_transform_name=$ac_optarg ;; |
|
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) |
ac_prev=pdfdir ;; |
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) |
pdfdir=$ac_optarg ;; |
|
-psdir | --psdir | --psdi | --psd | --ps) |
ac_prev=psdir ;; |
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) |
psdir=$ac_optarg ;; |
|
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
silent=yes ;; |
|
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
ac_prev=sbindir ;; |
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| --sbi=* | --sb=*) |
sbindir=$ac_optarg ;; |
|
-sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| --sharedst | --shareds | --shared | --share | --shar \ |
| --sha | --sh) |
ac_prev=sharedstatedir ;; |
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| --sha=* | --sh=*) |
sharedstatedir=$ac_optarg ;; |
|
-site | --site | --sit) |
ac_prev=site ;; |
-site=* | --site=* | --sit=*) |
site=$ac_optarg ;; |
|
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
ac_prev=srcdir ;; |
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
srcdir=$ac_optarg ;; |
|
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| --syscon | --sysco | --sysc | --sys | --sy) |
ac_prev=sysconfdir ;; |
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
sysconfdir=$ac_optarg ;; |
|
-target | --target | --targe | --targ | --tar | --ta | --t) |
ac_prev=target_alias ;; |
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
target_alias=$ac_optarg ;; |
|
-v | -verbose | --verbose | --verbos | --verbo | --verb) |
verbose=yes ;; |
|
-version | --version | --versio | --versi | --vers | -V) |
ac_init_version=: ;; |
|
-with-* | --with-*) |
ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && |
{ $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 |
{ (exit 1); exit 1; }; } |
ac_useropt_orig=$ac_useropt |
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` |
case $ac_user_opts in |
*" |
"with_$ac_useropt" |
"*) ;; |
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" |
ac_unrecognized_sep=', ';; |
esac |
eval with_$ac_useropt=\$ac_optarg ;; |
|
-without-* | --without-*) |
ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && |
{ $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 |
{ (exit 1); exit 1; }; } |
ac_useropt_orig=$ac_useropt |
ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` |
case $ac_user_opts in |
*" |
"with_$ac_useropt" |
"*) ;; |
*) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" |
ac_unrecognized_sep=', ';; |
esac |
eval with_$ac_useropt=no ;; |
|
--x) |
# Obsolete; use --with-x. |
with_x=yes ;; |
|
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| --x-incl | --x-inc | --x-in | --x-i) |
ac_prev=x_includes ;; |
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
x_includes=$ac_optarg ;; |
|
-x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
ac_prev=x_libraries ;; |
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
x_libraries=$ac_optarg ;; |
|
-*) { $as_echo "$as_me: error: unrecognized option: $ac_option |
Try \`$0 --help' for more information." >&2 |
{ (exit 1); exit 1; }; } |
;; |
|
*=*) |
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` |
# Reject names that are not valid shell variable names. |
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
{ $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
{ (exit 1); exit 1; }; } |
eval $ac_envvar=\$ac_optarg |
export $ac_envvar ;; |
|
*) |
# FIXME: should be removed in autoconf 3.0. |
$as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 |
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && |
$as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 |
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} |
;; |
|
esac |
done |
|
if test -n "$ac_prev"; then |
ac_option=--`echo $ac_prev | sed 's/_/-/g'` |
{ $as_echo "$as_me: error: missing argument to $ac_option" >&2 |
{ (exit 1); exit 1; }; } |
fi |
|
if test -n "$ac_unrecognized_opts"; then |
case $enable_option_checking in |
no) ;; |
fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 |
{ (exit 1); exit 1; }; } ;; |
*) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; |
esac |
fi |
|
# Check all directory arguments for consistency. |
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ |
datadir sysconfdir sharedstatedir localstatedir includedir \ |
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ |
libdir localedir mandir |
do |
eval ac_val=\$$ac_var |
# Remove trailing slashes. |
case $ac_val in |
*/ ) |
ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` |
eval $ac_var=\$ac_val;; |
esac |
# Be sure to have absolute directory names. |
case $ac_val in |
[\\/$]* | ?:[\\/]* ) continue;; |
NONE | '' ) case $ac_var in *prefix ) continue;; esac;; |
esac |
{ $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
{ (exit 1); exit 1; }; } |
done |
|
# There might be people who depend on the old broken behavior: `$host' |
# used to hold the argument of --host etc. |
# FIXME: To remove some day. |
build=$build_alias |
host=$host_alias |
target=$target_alias |
|
# FIXME: To remove some day. |
if test "x$host_alias" != x; then |
if test "x$build_alias" = x; then |
cross_compiling=maybe |
$as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. |
If a cross compiler is detected then cross compile mode will be used." >&2 |
elif test "x$build_alias" != "x$host_alias"; then |
cross_compiling=yes |
fi |
fi |
|
ac_tool_prefix= |
test -n "$host_alias" && ac_tool_prefix=$host_alias- |
|
test "$silent" = yes && exec 6>/dev/null |
|
|
ac_pwd=`pwd` && test -n "$ac_pwd" && |
ac_ls_di=`ls -di .` && |
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || |
{ $as_echo "$as_me: error: working directory cannot be determined" >&2 |
{ (exit 1); exit 1; }; } |
test "X$ac_ls_di" = "X$ac_pwd_ls_di" || |
{ $as_echo "$as_me: error: pwd does not report name of working directory" >&2 |
{ (exit 1); exit 1; }; } |
|
|
# Find the source files, if location was not specified. |
if test -z "$srcdir"; then |
ac_srcdir_defaulted=yes |
# Try the directory containing this script, then the parent directory. |
ac_confdir=`$as_dirname -- "$as_myself" || |
$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$as_myself" : 'X\(//\)[^/]' \| \ |
X"$as_myself" : 'X\(//\)$' \| \ |
X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || |
$as_echo X"$as_myself" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ |
s//\1/ |
q |
} |
/^X\(\/\/\)[^/].*/{ |
s//\1/ |
q |
} |
/^X\(\/\/\)$/{ |
s//\1/ |
q |
} |
/^X\(\/\).*/{ |
s//\1/ |
q |
} |
s/.*/./; q'` |
srcdir=$ac_confdir |
if test ! -r "$srcdir/$ac_unique_file"; then |
srcdir=.. |
fi |
else |
ac_srcdir_defaulted=no |
fi |
if test ! -r "$srcdir/$ac_unique_file"; then |
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." |
{ $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
{ (exit 1); exit 1; }; } |
fi |
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" |
ac_abs_confdir=`( |
cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 |
{ (exit 1); exit 1; }; } |
pwd)` |
# When building in place, set srcdir=. |
if test "$ac_abs_confdir" = "$ac_pwd"; then |
srcdir=. |
fi |
# Remove unnecessary trailing slashes from srcdir. |
# Double slashes in file names in object file debugging info |
# mess up M-x gdb in Emacs. |
case $srcdir in |
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; |
esac |
for ac_var in $ac_precious_vars; do |
eval ac_env_${ac_var}_set=\${${ac_var}+set} |
eval ac_env_${ac_var}_value=\$${ac_var} |
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} |
eval ac_cv_env_${ac_var}_value=\$${ac_var} |
done |
|
# |
# Report the --help message. |
# |
if test "$ac_init_help" = "long"; then |
# Omit some internal or obsolete options to make the list less imposing. |
# This message is too long to be a string in the A/UX 3.1 sh. |
cat <<_ACEOF |
\`configure' configures newlib 1.18.0 to adapt to many kinds of systems. |
|
Usage: $0 [OPTION]... [VAR=VALUE]... |
|
To assign environment variables (e.g., CC, CFLAGS...), specify them as |
VAR=VALUE. See below for descriptions of some of the useful variables. |
|
Defaults for the options are specified in brackets. |
|
Configuration: |
-h, --help display this help and exit |
--help=short display options specific to this package |
--help=recursive display the short help of all the included packages |
-V, --version display version information and exit |
-q, --quiet, --silent do not print \`checking...' messages |
--cache-file=FILE cache test results in FILE [disabled] |
-C, --config-cache alias for \`--cache-file=config.cache' |
-n, --no-create do not create output files |
--srcdir=DIR find the sources in DIR [configure dir or \`..'] |
|
Installation directories: |
--prefix=PREFIX install architecture-independent files in PREFIX |
[$ac_default_prefix] |
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
[PREFIX] |
|
By default, \`make install' will install all the files in |
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify |
an installation prefix other than \`$ac_default_prefix' using \`--prefix', |
for instance \`--prefix=\$HOME'. |
|
For better control, use the options below. |
|
Fine tuning of the installation directories: |
--bindir=DIR user executables [EPREFIX/bin] |
--sbindir=DIR system admin executables [EPREFIX/sbin] |
--libexecdir=DIR program executables [EPREFIX/libexec] |
--sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
--localstatedir=DIR modifiable single-machine data [PREFIX/var] |
--libdir=DIR object code libraries [EPREFIX/lib] |
--includedir=DIR C header files [PREFIX/include] |
--oldincludedir=DIR C header files for non-gcc [/usr/include] |
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share] |
--datadir=DIR read-only architecture-independent data [DATAROOTDIR] |
--infodir=DIR info documentation [DATAROOTDIR/info] |
--localedir=DIR locale-dependent data [DATAROOTDIR/locale] |
--mandir=DIR man documentation [DATAROOTDIR/man] |
--docdir=DIR documentation root [DATAROOTDIR/doc/newlib] |
--htmldir=DIR html documentation [DOCDIR] |
--dvidir=DIR dvi documentation [DOCDIR] |
--pdfdir=DIR pdf documentation [DOCDIR] |
--psdir=DIR ps documentation [DOCDIR] |
_ACEOF |
|
cat <<\_ACEOF |
|
Program names: |
--program-prefix=PREFIX prepend PREFIX to installed program names |
--program-suffix=SUFFIX append SUFFIX to installed program names |
--program-transform-name=PROGRAM run sed PROGRAM on installed program names |
|
System types: |
--build=BUILD configure for building on BUILD [guessed] |
--host=HOST cross-compile to build programs to run on HOST [BUILD] |
_ACEOF |
fi |
|
if test -n "$ac_init_help"; then |
case $ac_init_help in |
short | recursive ) echo "Configuration of newlib 1.18.0:";; |
esac |
cat <<\_ACEOF |
|
Optional Features: |
--disable-option-checking ignore unrecognized --enable/--with options |
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
--enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
--enable-multilib build many library versions (default) |
--enable-target-optspace optimize for space |
--enable-malloc-debugging indicate malloc debugging requested |
--enable-newlib-multithread enable support for multiple threads |
--enable-newlib-iconv enable iconv library support |
--enable-newlib-elix-level supply desired elix library level (1-4) |
--disable-newlib-io-float disable printf/scanf family float support |
--disable-newlib-supplied-syscalls disable newlib from supplying syscalls |
--disable-dependency-tracking speeds up one-time build |
--enable-dependency-tracking do not reject slow dependency extractors |
--enable-maintainer-mode enable make rules and dependencies not useful |
(and sometimes confusing) to the casual installer |
|
Some influential environment variables: |
CCAS assembler compiler command (defaults to CC) |
CCASFLAGS assembler compiler flags (defaults to CFLAGS) |
|
Use these variables to override the choices made by `configure' or to help |
it to find libraries and programs with nonstandard names/locations. |
|
_ACEOF |
ac_status=$? |
fi |
|
if test "$ac_init_help" = "recursive"; then |
# If there are subdirs, report their specific --help. |
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
test -d "$ac_dir" || |
{ cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || |
continue |
ac_builddir=. |
|
case "$ac_dir" in |
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; |
*) |
ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` |
# A ".." for each directory in $ac_dir_suffix. |
ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` |
case $ac_top_builddir_sub in |
"") ac_top_builddir_sub=. ac_top_build_prefix= ;; |
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;; |
esac ;; |
esac |
ac_abs_top_builddir=$ac_pwd |
ac_abs_builddir=$ac_pwd$ac_dir_suffix |
# for backward compatibility: |
ac_top_builddir=$ac_top_build_prefix |
|
case $srcdir in |
.) # We are building in place. |
ac_srcdir=. |
ac_top_srcdir=$ac_top_builddir_sub |
ac_abs_top_srcdir=$ac_pwd ;; |
[\\/]* | ?:[\\/]* ) # Absolute name. |
ac_srcdir=$srcdir$ac_dir_suffix; |
ac_top_srcdir=$srcdir |
ac_abs_top_srcdir=$srcdir ;; |
*) # Relative name. |
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix |
ac_top_srcdir=$ac_top_build_prefix$srcdir |
ac_abs_top_srcdir=$ac_pwd/$srcdir ;; |
esac |
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix |
|
cd "$ac_dir" || { ac_status=$?; continue; } |
# Check for guested configure. |
if test -f "$ac_srcdir/configure.gnu"; then |
echo && |
$SHELL "$ac_srcdir/configure.gnu" --help=recursive |
elif test -f "$ac_srcdir/configure"; then |
echo && |
$SHELL "$ac_srcdir/configure" --help=recursive |
else |
$as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
fi || ac_status=$? |
cd "$ac_pwd" || { ac_status=$?; break; } |
done |
fi |
|
test -n "$ac_init_help" && exit $ac_status |
if $ac_init_version; then |
cat <<\_ACEOF |
newlib configure 1.18.0 |
generated by GNU Autoconf 2.63 |
|
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, |
2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. |
This configure script is free software; the Free Software Foundation |
gives unlimited permission to copy, distribute and modify it. |
_ACEOF |
exit |
fi |
cat >config.log <<_ACEOF |
This file contains any messages produced by compilers while |
running configure, to aid debugging if configure makes a mistake. |
|
It was created by newlib $as_me 1.18.0, which was |
generated by GNU Autoconf 2.63. Invocation command line was |
|
$ $0 $@ |
|
_ACEOF |
exec 5>>config.log |
{ |
cat <<_ASUNAME |
## --------- ## |
## Platform. ## |
## --------- ## |
|
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` |
uname -m = `(uname -m) 2>/dev/null || echo unknown` |
uname -r = `(uname -r) 2>/dev/null || echo unknown` |
uname -s = `(uname -s) 2>/dev/null || echo unknown` |
uname -v = `(uname -v) 2>/dev/null || echo unknown` |
|
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` |
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` |
|
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` |
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
|
_ASUNAME |
|
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
$as_echo "PATH: $as_dir" |
done |
IFS=$as_save_IFS |
|
} >&5 |
|
cat >&5 <<_ACEOF |
|
|
## ----------- ## |
## Core tests. ## |
## ----------- ## |
|
_ACEOF |
|
|
# Keep a trace of the command line. |
# Strip out --no-create and --no-recursion so they do not pile up. |
# Strip out --silent because we don't want to record it for future runs. |
# Also quote any args containing shell meta-characters. |
# Make two passes to allow for proper duplicate-argument suppression. |
ac_configure_args= |
ac_configure_args0= |
ac_configure_args1= |
ac_must_keep_next=false |
for ac_pass in 1 2 |
do |
for ac_arg |
do |
case $ac_arg in |
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; |
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
continue ;; |
*\'*) |
ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
esac |
case $ac_pass in |
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; |
2) |
ac_configure_args1="$ac_configure_args1 '$ac_arg'" |
if test $ac_must_keep_next = true; then |
ac_must_keep_next=false # Got value, back to normal. |
else |
case $ac_arg in |
*=* | --config-cache | -C | -disable-* | --disable-* \ |
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| -with-* | --with-* | -without-* | --without-* | --x) |
case "$ac_configure_args0 " in |
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;; |
esac |
;; |
-* ) ac_must_keep_next=true ;; |
esac |
fi |
ac_configure_args="$ac_configure_args '$ac_arg'" |
;; |
esac |
done |
done |
$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } |
$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } |
|
# When interrupted or exit'd, cleanup temporary files, and complete |
# config.log. We remove comments because anyway the quotes in there |
# would cause problems or look ugly. |
# WARNING: Use '\'' to represent an apostrophe within the trap. |
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. |
trap 'exit_status=$? |
# Save into config.log some information that might help in debugging. |
{ |
echo |
|
cat <<\_ASBOX |
## ---------------- ## |
## Cache variables. ## |
## ---------------- ## |
_ASBOX |
echo |
# The following way of writing the cache mishandles newlines in values, |
( |
for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do |
eval ac_val=\$$ac_var |
case $ac_val in #( |
*${as_nl}*) |
case $ac_var in #( |
*_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 |
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; |
esac |
case $ac_var in #( |
_ | IFS | as_nl) ;; #( |
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( |
*) $as_unset $ac_var ;; |
esac ;; |
esac |
done |
(set) 2>&1 | |
case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( |
*${as_nl}ac_space=\ *) |
sed -n \ |
"s/'\''/'\''\\\\'\'''\''/g; |
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" |
;; #( |
*) |
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
;; |
esac | |
sort |
) |
echo |
|
cat <<\_ASBOX |
## ----------------- ## |
## Output variables. ## |
## ----------------- ## |
_ASBOX |
echo |
for ac_var in $ac_subst_vars |
do |
eval ac_val=\$$ac_var |
case $ac_val in |
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
esac |
$as_echo "$ac_var='\''$ac_val'\''" |
done | sort |
echo |
|
if test -n "$ac_subst_files"; then |
cat <<\_ASBOX |
## ------------------- ## |
## File substitutions. ## |
## ------------------- ## |
_ASBOX |
echo |
for ac_var in $ac_subst_files |
do |
eval ac_val=\$$ac_var |
case $ac_val in |
*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; |
esac |
$as_echo "$ac_var='\''$ac_val'\''" |
done | sort |
echo |
fi |
|
if test -s confdefs.h; then |
cat <<\_ASBOX |
## ----------- ## |
## confdefs.h. ## |
## ----------- ## |
_ASBOX |
echo |
cat confdefs.h |
echo |
fi |
test "$ac_signal" != 0 && |
$as_echo "$as_me: caught signal $ac_signal" |
$as_echo "$as_me: exit $exit_status" |
} >&5 |
rm -f core *.core core.conftest.* && |
rm -f -r conftest* confdefs* conf$$* $ac_clean_files && |
exit $exit_status |
' 0 |
for ac_signal in 1 2 13 15; do |
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
done |
ac_signal=0 |
|
# confdefs.h avoids OS command line length limits that DEFS can exceed. |
rm -f -r conftest* confdefs.h |
|
# Predefined preprocessor variables. |
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_NAME "$PACKAGE_NAME" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_TARNAME "$PACKAGE_TARNAME" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_VERSION "$PACKAGE_VERSION" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_STRING "$PACKAGE_STRING" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" |
_ACEOF |
|
|
# Let the site file select an alternate cache file if it wants to. |
# Prefer an explicitly selected file to automatically selected ones. |
ac_site_file1=NONE |
ac_site_file2=NONE |
if test -n "$CONFIG_SITE"; then |
ac_site_file1=$CONFIG_SITE |
elif test "x$prefix" != xNONE; then |
ac_site_file1=$prefix/share/config.site |
ac_site_file2=$prefix/etc/config.site |
else |
ac_site_file1=$ac_default_prefix/share/config.site |
ac_site_file2=$ac_default_prefix/etc/config.site |
fi |
for ac_site_file in "$ac_site_file1" "$ac_site_file2" |
do |
test "x$ac_site_file" = xNONE && continue |
if test -r "$ac_site_file"; then |
{ $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
$as_echo "$as_me: loading site script $ac_site_file" >&6;} |
sed 's/^/| /' "$ac_site_file" >&5 |
. "$ac_site_file" |
fi |
done |
|
if test -r "$cache_file"; then |
# Some versions of bash will fail to source /dev/null (special |
# files actually), so we avoid doing that. |
if test -f "$cache_file"; then |
{ $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
$as_echo "$as_me: loading cache $cache_file" >&6;} |
case $cache_file in |
[\\/]* | ?:[\\/]* ) . "$cache_file";; |
*) . "./$cache_file";; |
esac |
fi |
else |
{ $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 |
$as_echo "$as_me: creating cache $cache_file" >&6;} |
>$cache_file |
fi |
|
# Check that the precious variables saved in the cache have kept the same |
# value. |
ac_cache_corrupted=false |
for ac_var in $ac_precious_vars; do |
eval ac_old_set=\$ac_cv_env_${ac_var}_set |
eval ac_new_set=\$ac_env_${ac_var}_set |
eval ac_old_val=\$ac_cv_env_${ac_var}_value |
eval ac_new_val=\$ac_env_${ac_var}_value |
case $ac_old_set,$ac_new_set in |
set,) |
{ $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} |
ac_cache_corrupted=: ;; |
,set) |
{ $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 |
$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} |
ac_cache_corrupted=: ;; |
,);; |
*) |
if test "x$ac_old_val" != "x$ac_new_val"; then |
# differences in whitespace do not lead to failure. |
ac_old_val_w=`echo x $ac_old_val` |
ac_new_val_w=`echo x $ac_new_val` |
if test "$ac_old_val_w" != "$ac_new_val_w"; then |
{ $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 |
$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} |
ac_cache_corrupted=: |
else |
{ $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 |
$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} |
eval $ac_var=\$ac_old_val |
fi |
{ $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 |
$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} |
{ $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 |
$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} |
fi;; |
esac |
# Pass precious variables to config.status. |
if test "$ac_new_set" = set; then |
case $ac_new_val in |
*\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
*) ac_arg=$ac_var=$ac_new_val ;; |
esac |
case " $ac_configure_args " in |
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. |
*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
esac |
fi |
done |
if $ac_cache_corrupted; then |
{ $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 |
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} |
{ $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 |
$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} |
{ { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 |
$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
|
|
|
|
ac_aux_dir= |
for ac_dir in ../.. "$srcdir"/../..; do |
if test -f "$ac_dir/install-sh"; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f "$ac_dir/install.sh"; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
elif test -f "$ac_dir/shtool"; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/shtool install -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../.. \"$srcdir\"/../.." >&5 |
$as_echo "$as_me: error: cannot find install-sh or install.sh in ../.. \"$srcdir\"/../.." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
# These three variables are undocumented and unsupported, |
# and are intended to be withdrawn in a future Autoconf release. |
# They can cause serious problems if a builder's source tree is in a directory |
# whose full name contains unusual characters. |
ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. |
ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. |
ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. |
|
|
|
|
# Make sure we can run config.sub. |
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || |
{ { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 |
$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} |
{ (exit 1); exit 1; }; } |
|
{ $as_echo "$as_me:$LINENO: checking build system type" >&5 |
$as_echo_n "checking build system type... " >&6; } |
if test "${ac_cv_build+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
ac_build_alias=$build_alias |
test "x$ac_build_alias" = x && |
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` |
test "x$ac_build_alias" = x && |
{ { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
{ (exit 1); exit 1; }; } |
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || |
{ { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 |
$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} |
{ (exit 1); exit 1; }; } |
|
fi |
{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
$as_echo "$ac_cv_build" >&6; } |
case $ac_cv_build in |
*-*-*) ;; |
*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 |
$as_echo "$as_me: error: invalid value of canonical build" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
build=$ac_cv_build |
ac_save_IFS=$IFS; IFS='-' |
set x $ac_cv_build |
shift |
build_cpu=$1 |
build_vendor=$2 |
shift; shift |
# Remember, the first character of IFS is used to create $*, |
# except with old shells: |
build_os=$* |
IFS=$ac_save_IFS |
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac |
|
|
am__api_version='1.11' |
|
# Find a good install program. We prefer a C program (faster), |
# so one script is as good as another. But avoid the broken or |
# incompatible versions: |
# SysV /etc/install, /usr/sbin/install |
# SunOS /usr/etc/install |
# IRIX /sbin/install |
# AIX /bin/install |
# AmigaOS /C/install, which installs bootblocks on floppy discs |
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
# OS/2's system install, which has a completely different semantic |
# ./install, which can be erroneously created by make from ./install.sh. |
# Reject install programs that cannot install multiple files. |
{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
$as_echo_n "checking for a BSD-compatible install... " >&6; } |
if test -z "$INSTALL"; then |
if test "${ac_cv_path_install+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
# Account for people who put trailing slashes in PATH elements. |
case $as_dir/ in |
./ | .// | /cC/* | \ |
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
/usr/ucb/* ) ;; |
*) |
# OSF1 and SCO ODT 3.0 have their own names for install. |
# Don't use installbsd from OSF since it installs stuff as root |
# by default. |
for ac_prog in ginstall scoinst install; do |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
if test $ac_prog = install && |
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# AIX install. It has an incompatible calling convention. |
: |
elif test $ac_prog = install && |
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# program-specific install script used by HP pwplus--don't use. |
: |
else |
rm -rf conftest.one conftest.two conftest.dir |
echo one > conftest.one |
echo two > conftest.two |
mkdir conftest.dir |
if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && |
test -s conftest.one && test -s conftest.two && |
test -s conftest.dir/conftest.one && |
test -s conftest.dir/conftest.two |
then |
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
break 3 |
fi |
fi |
fi |
done |
done |
;; |
esac |
|
done |
IFS=$as_save_IFS |
|
rm -rf conftest.one conftest.two conftest.dir |
|
fi |
if test "${ac_cv_path_install+set}" = set; then |
INSTALL=$ac_cv_path_install |
else |
# As a last resort, use the slow shell script. Don't cache a |
# value for INSTALL within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the value is a relative name. |
INSTALL=$ac_install_sh |
fi |
fi |
{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 |
$as_echo "$INSTALL" >&6; } |
|
# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
# It thinks the first close brace ends the variable substitution. |
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
|
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
|
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
|
{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
$as_echo_n "checking whether build environment is sane... " >&6; } |
# Just in case |
sleep 1 |
echo timestamp > conftest.file |
# Reject unsafe characters in $srcdir or the absolute working directory |
# name. Accept space and tab only in the latter. |
am_lf=' |
' |
case `pwd` in |
*[\\\"\#\$\&\'\`$am_lf]*) |
{ { $as_echo "$as_me:$LINENO: error: unsafe absolute working directory name" >&5 |
$as_echo "$as_me: error: unsafe absolute working directory name" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
case $srcdir in |
*[\\\"\#\$\&\'\`$am_lf\ \ ]*) |
{ { $as_echo "$as_me:$LINENO: error: unsafe srcdir value: \`$srcdir'" >&5 |
$as_echo "$as_me: error: unsafe srcdir value: \`$srcdir'" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
|
# Do `set' in a subshell so we don't clobber the current shell's |
# arguments. Must try -L first in case configure is actually a |
# symlink; some systems play weird games with the mod time of symlinks |
# (eg FreeBSD returns the mod time of the symlink's containing |
# directory). |
if ( |
set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` |
if test "$*" = "X"; then |
# -L didn't work. |
set X `ls -t "$srcdir/configure" conftest.file` |
fi |
rm -f conftest.file |
if test "$*" != "X $srcdir/configure conftest.file" \ |
&& test "$*" != "X conftest.file $srcdir/configure"; then |
|
# If neither matched, then we have a broken ls. This can happen |
# if, for instance, CONFIG_SHELL is bash and it inherits a |
# broken ls alias from the environment. This has actually |
# happened. Such a system could not be considered "sane". |
{ { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken |
alias in your environment" >&5 |
$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken |
alias in your environment" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
test "$2" = conftest.file |
) |
then |
# Ok. |
: |
else |
{ { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! |
Check your system clock" >&5 |
$as_echo "$as_me: error: newly created file is older than distributed files! |
Check your system clock" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
{ $as_echo "$as_me:$LINENO: result: yes" >&5 |
$as_echo "yes" >&6; } |
test "$program_prefix" != NONE && |
program_transform_name="s&^&$program_prefix&;$program_transform_name" |
# Use a double $ so make ignores it. |
test "$program_suffix" != NONE && |
program_transform_name="s&\$&$program_suffix&;$program_transform_name" |
# Double any \ or $. |
# By default was `s,x,x', remove it if useless. |
ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' |
program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` |
|
# expand $ac_aux_dir to an absolute path |
am_aux_dir=`cd $ac_aux_dir && pwd` |
|
if test x"${MISSING+set}" != xset; then |
case $am_aux_dir in |
*\ * | *\ *) |
MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; |
*) |
MISSING="\${SHELL} $am_aux_dir/missing" ;; |
esac |
fi |
# Use eval to expand $SHELL |
if eval "$MISSING --run true"; then |
am_missing_run="$MISSING --run " |
else |
am_missing_run= |
{ $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 |
$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} |
fi |
|
if test x"${install_sh}" != xset; then |
case $am_aux_dir in |
*\ * | *\ *) |
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; |
*) |
install_sh="\${SHELL} $am_aux_dir/install-sh" |
esac |
fi |
|
# Installed binaries are usually stripped using `strip' when the user |
# run `make install-strip'. However `strip' might not be the right |
# tool to use in cross-compilation environments, therefore Automake |
# will honor the `STRIP' environment variable to overrule this program. |
if test "$cross_compiling" != no; then |
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
set dummy ${ac_tool_prefix}strip; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_STRIP+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$STRIP"; then |
ac_cv_prog_STRIP="$STRIP" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
STRIP=$ac_cv_prog_STRIP |
if test -n "$STRIP"; then |
{ $as_echo "$as_me:$LINENO: result: $STRIP" >&5 |
$as_echo "$STRIP" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
fi |
if test -z "$ac_cv_prog_STRIP"; then |
ac_ct_STRIP=$STRIP |
# Extract the first word of "strip", so it can be a program name with args. |
set dummy strip; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$ac_ct_STRIP"; then |
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_ac_ct_STRIP="strip" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
if test -n "$ac_ct_STRIP"; then |
{ $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
$as_echo "$ac_ct_STRIP" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
if test "x$ac_ct_STRIP" = x; then |
STRIP=":" |
else |
case $cross_compiling:$ac_tool_warned in |
yes:) |
{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 |
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} |
ac_tool_warned=yes ;; |
esac |
STRIP=$ac_ct_STRIP |
fi |
else |
STRIP="$ac_cv_prog_STRIP" |
fi |
|
fi |
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" |
|
{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 |
$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } |
if test -z "$MKDIR_P"; then |
if test "${ac_cv_path_mkdir+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_prog in mkdir gmkdir; do |
for ac_exec_ext in '' $ac_executable_extensions; do |
{ test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue |
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( |
'mkdir (GNU coreutils) '* | \ |
'mkdir (coreutils) '* | \ |
'mkdir (fileutils) '4.1*) |
ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext |
break 3;; |
esac |
done |
done |
done |
IFS=$as_save_IFS |
|
fi |
|
if test "${ac_cv_path_mkdir+set}" = set; then |
MKDIR_P="$ac_cv_path_mkdir -p" |
else |
# As a last resort, use the slow shell script. Don't cache a |
# value for MKDIR_P within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the value is a relative name. |
test -d ./--version && rmdir ./--version |
MKDIR_P="$ac_install_sh -d" |
fi |
fi |
{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 |
$as_echo "$MKDIR_P" >&6; } |
|
mkdir_p="$MKDIR_P" |
case $mkdir_p in |
[\\/$]* | ?:[\\/]*) ;; |
*/*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; |
esac |
|
for ac_prog in gawk mawk nawk awk |
do |
# Extract the first word of "$ac_prog", so it can be a program name with args. |
set dummy $ac_prog; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_AWK+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$AWK"; then |
ac_cv_prog_AWK="$AWK" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_AWK="$ac_prog" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
AWK=$ac_cv_prog_AWK |
if test -n "$AWK"; then |
{ $as_echo "$as_me:$LINENO: result: $AWK" >&5 |
$as_echo "$AWK" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
test -n "$AWK" && break |
done |
|
{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } |
set x ${MAKE-make} |
ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` |
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then |
$as_echo_n "(cached) " >&6 |
else |
cat >conftest.make <<\_ACEOF |
SHELL = /bin/sh |
all: |
@echo '@@@%%%=$(MAKE)=@@@%%%' |
_ACEOF |
# GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
case `${MAKE-make} -f conftest.make 2>/dev/null` in |
*@@@%%%=?*=@@@%%%*) |
eval ac_cv_prog_make_${ac_make}_set=yes;; |
*) |
eval ac_cv_prog_make_${ac_make}_set=no;; |
esac |
rm -f conftest.make |
fi |
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then |
{ $as_echo "$as_me:$LINENO: result: yes" >&5 |
$as_echo "yes" >&6; } |
SET_MAKE= |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
SET_MAKE="MAKE=${MAKE-make}" |
fi |
|
rm -rf .tst 2>/dev/null |
mkdir .tst 2>/dev/null |
if test -d .tst; then |
am__leading_dot=. |
else |
am__leading_dot=_ |
fi |
rmdir .tst 2>/dev/null |
|
DEPDIR="${am__leading_dot}deps" |
|
ac_config_commands="$ac_config_commands depfiles" |
|
|
am_make=${MAKE-make} |
cat > confinc << 'END' |
am__doit: |
@echo this is the am__doit target |
.PHONY: am__doit |
END |
# If we don't find an include directive, just comment out the code. |
{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
$as_echo_n "checking for style of include used by $am_make... " >&6; } |
am__include="#" |
am__quote= |
_am_result=none |
# First try GNU make style include. |
echo "include confinc" > confmf |
# Ignore all kinds of additional output from `make'. |
case `$am_make -s -f confmf 2> /dev/null` in #( |
*the\ am__doit\ target*) |
am__include=include |
am__quote= |
_am_result=GNU |
;; |
esac |
# Now try BSD make style include. |
if test "$am__include" = "#"; then |
echo '.include "confinc"' > confmf |
case `$am_make -s -f confmf 2> /dev/null` in #( |
*the\ am__doit\ target*) |
am__include=.include |
am__quote="\"" |
_am_result=BSD |
;; |
esac |
fi |
|
|
{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 |
$as_echo "$_am_result" >&6; } |
rm -f confinc confmf |
|
# Check whether --enable-dependency-tracking was given. |
if test "${enable_dependency_tracking+set}" = set; then |
enableval=$enable_dependency_tracking; |
fi |
|
if test "x$enable_dependency_tracking" != xno; then |
am_depcomp="$ac_aux_dir/depcomp" |
AMDEPBACKSLASH='\' |
fi |
if test "x$enable_dependency_tracking" != xno; then |
AMDEP_TRUE= |
AMDEP_FALSE='#' |
else |
AMDEP_TRUE='#' |
AMDEP_FALSE= |
fi |
|
|
|
# Check whether --enable-multilib was given. |
if test "${enable_multilib+set}" = set; then |
enableval=$enable_multilib; case "${enableval}" in |
yes) multilib=yes ;; |
no) multilib=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for multilib option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for multilib option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
multilib=yes |
fi |
|
# Check whether --enable-target-optspace was given. |
if test "${enable_target_optspace+set}" = set; then |
enableval=$enable_target_optspace; case "${enableval}" in |
yes) target_optspace=yes ;; |
no) target_optspace=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for target-optspace option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for target-optspace option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
target_optspace= |
fi |
|
# Check whether --enable-malloc-debugging was given. |
if test "${enable_malloc_debugging+set}" = set; then |
enableval=$enable_malloc_debugging; case "${enableval}" in |
yes) malloc_debugging=yes ;; |
no) malloc_debugging=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for malloc-debugging option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for malloc-debugging option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
malloc_debugging= |
fi |
|
# Check whether --enable-newlib-multithread was given. |
if test "${enable_newlib_multithread+set}" = set; then |
enableval=$enable_newlib_multithread; case "${enableval}" in |
yes) newlib_multithread=yes ;; |
no) newlib_multithread=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-multithread option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for newlib-multithread option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
newlib_multithread=yes |
fi |
|
# Check whether --enable-newlib-iconv was given. |
if test "${enable_newlib_iconv+set}" = set; then |
enableval=$enable_newlib_iconv; if test "${newlib_iconv+set}" != set; then |
case "${enableval}" in |
yes) newlib_iconv=yes ;; |
no) newlib_iconv=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-iconv option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for newlib-iconv option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
fi |
else |
newlib_iconv=${newlib_iconv} |
fi |
|
# Check whether --enable-newlib-elix-level was given. |
if test "${enable_newlib_elix_level+set}" = set; then |
enableval=$enable_newlib_elix_level; case "${enableval}" in |
0) newlib_elix_level=0 ;; |
1) newlib_elix_level=1 ;; |
2) newlib_elix_level=2 ;; |
3) newlib_elix_level=3 ;; |
4) newlib_elix_level=4 ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-elix-level option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for newlib-elix-level option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
newlib_elix_level=0 |
fi |
|
# Check whether --enable-newlib-io-float was given. |
if test "${enable_newlib_io_float+set}" = set; then |
enableval=$enable_newlib_io_float; case "${enableval}" in |
yes) newlib_io_float=yes ;; |
no) newlib_io_float=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-io-float option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for newlib-io-float option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
newlib_io_float=yes |
fi |
|
# Check whether --enable-newlib-supplied-syscalls was given. |
if test "${enable_newlib_supplied_syscalls+set}" = set; then |
enableval=$enable_newlib_supplied_syscalls; case "${enableval}" in |
yes) newlib_may_supply_syscalls=yes ;; |
no) newlib_may_supply_syscalls=no ;; |
*) { { $as_echo "$as_me:$LINENO: error: bad value ${enableval} for newlib-supplied-syscalls option" >&5 |
$as_echo "$as_me: error: bad value ${enableval} for newlib-supplied-syscalls option" >&2;} |
{ (exit 1); exit 1; }; } ;; |
esac |
else |
newlib_may_supply_syscalls=yes |
fi |
|
if test x${newlib_may_supply_syscalls} = xyes; then |
MAY_SUPPLY_SYSCALLS_TRUE= |
MAY_SUPPLY_SYSCALLS_FALSE='#' |
else |
MAY_SUPPLY_SYSCALLS_TRUE='#' |
MAY_SUPPLY_SYSCALLS_FALSE= |
fi |
|
|
|
test -z "${with_target_subdir}" && with_target_subdir=. |
|
if test "${srcdir}" = "."; then |
if test "${with_target_subdir}" != "."; then |
newlib_basedir="${srcdir}/${with_multisrctop}../.." |
else |
newlib_basedir="${srcdir}/${with_multisrctop}.." |
fi |
else |
newlib_basedir="${srcdir}/.." |
fi |
|
|
{ $as_echo "$as_me:$LINENO: checking host system type" >&5 |
$as_echo_n "checking host system type... " >&6; } |
if test "${ac_cv_host+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test "x$host_alias" = x; then |
ac_cv_host=$ac_cv_build |
else |
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || |
{ { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 |
$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
fi |
{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
$as_echo "$ac_cv_host" >&6; } |
case $ac_cv_host in |
*-*-*) ;; |
*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 |
$as_echo "$as_me: error: invalid value of canonical host" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
host=$ac_cv_host |
ac_save_IFS=$IFS; IFS='-' |
set x $ac_cv_host |
shift |
host_cpu=$1 |
host_vendor=$2 |
shift; shift |
# Remember, the first character of IFS is used to create $*, |
# except with old shells: |
host_os=$* |
IFS=$ac_save_IFS |
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac |
|
|
|
if test "`cd $srcdir && pwd`" != "`pwd`"; then |
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output |
# is not polluted with repeated "-I." |
am__isrc=' -I$(srcdir)' |
# test to see if srcdir already configured |
if test -f $srcdir/config.status; then |
{ { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 |
$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
fi |
|
# test whether we have cygpath |
if test -z "$CYGPATH_W"; then |
if (cygpath --version) >/dev/null 2>/dev/null; then |
CYGPATH_W='cygpath -w' |
else |
CYGPATH_W=echo |
fi |
fi |
|
|
# Define the identity of the package. |
PACKAGE='newlib' |
VERSION='1.18.0' |
|
|
# Some tools Automake needs. |
|
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} |
|
|
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} |
|
|
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} |
|
|
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} |
|
|
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} |
|
# We need awk for the "check" target. The system "awk" is bad on |
# some platforms. |
# Always define AMTAR for backward compatibility. |
|
AMTAR=${AMTAR-"${am_missing_run}tar"} |
|
am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' |
|
|
|
|
|
|
# FIXME: We temporarily define our own version of AC_PROG_CC. This is |
# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
# are probably using a cross compiler, which will not be able to fully |
# link an executable. This should really be fixed in autoconf |
# itself. |
|
|
|
|
|
|
|
# Extract the first word of "gcc", so it can be a program name with args. |
set dummy gcc; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_CC+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_CC="gcc" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
{ $as_echo "$as_me:$LINENO: result: $CC" >&5 |
$as_echo "$CC" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
|
depcc="$CC" am_compiler_list= |
|
{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
$as_echo_n "checking dependency style of $depcc... " >&6; } |
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then |
# We make a subdir and do the tests there. Otherwise we can end up |
# making bogus files that we don't know about and never remove. For |
# instance it was reported that on HP-UX the gcc test will end up |
# making a dummy file named `D' -- because `-MD' means `put the output |
# in D'. |
mkdir conftest.dir |
# Copy depcomp to subdir because otherwise we won't find it if we're |
# using a relative directory. |
cp "$am_depcomp" conftest.dir |
cd conftest.dir |
# We will build objects and dependencies in a subdirectory because |
# it helps to detect inapplicable dependency modes. For instance |
# both Tru64's cc and ICC support -MD to output dependencies as a |
# side effect of compilation, but ICC will put the dependencies in |
# the current directory while Tru64 will put them in the object |
# directory. |
mkdir sub |
|
am_cv_CC_dependencies_compiler_type=none |
if test "$am_compiler_list" = ""; then |
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` |
fi |
am__universal=false |
case " $depcc " in #( |
*\ -arch\ *\ -arch\ *) am__universal=true ;; |
esac |
|
for depmode in $am_compiler_list; do |
# Setup a source with many dependencies, because some compilers |
# like to wrap large dependency lists on column 80 (with \), and |
# we should not choose a depcomp mode which is confused by this. |
# |
# We need to recreate these files for each test, as the compiler may |
# overwrite some of them when testing with obscure command lines. |
# This happens at least with the AIX C compiler. |
: > sub/conftest.c |
for i in 1 2 3 4 5 6; do |
echo '#include "conftst'$i'.h"' >> sub/conftest.c |
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with |
# Solaris 8's {/usr,}/bin/sh. |
touch sub/conftst$i.h |
done |
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf |
|
# We check with `-c' and `-o' for the sake of the "dashmstdout" |
# mode. It turns out that the SunPro C++ compiler does not properly |
# handle `-M -o', and we need to detect this. Also, some Intel |
# versions had trouble with output in subdirs |
am__obj=sub/conftest.${OBJEXT-o} |
am__minus_obj="-o $am__obj" |
case $depmode in |
gcc) |
# This depmode causes a compiler race in universal mode. |
test "$am__universal" = false || continue |
;; |
nosideeffect) |
# after this tag, mechanisms are not by side-effect, so they'll |
# only be used when explicitly requested |
if test "x$enable_dependency_tracking" = xyes; then |
continue |
else |
break |
fi |
;; |
msvisualcpp | msvcmsys) |
# This compiler won't grok `-c -o', but also, the minuso test has |
# not run yet. These depmodes are late enough in the game, and |
# so weak that their functioning should not be impacted. |
am__obj=conftest.${OBJEXT-o} |
am__minus_obj= |
;; |
none) break ;; |
esac |
if depmode=$depmode \ |
source=sub/conftest.c object=$am__obj \ |
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ |
$SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ |
>/dev/null 2>conftest.err && |
grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && |
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && |
grep $am__obj sub/conftest.Po > /dev/null 2>&1 && |
${MAKE-make} -s -f confmf > /dev/null 2>&1; then |
# icc doesn't choke on unknown options, it will just issue warnings |
# or remarks (even with -Werror). So we grep stderr for any message |
# that says an option was ignored or not supported. |
# When given -MP, icc 7.0 and 7.1 complain thusly: |
# icc: Command line warning: ignoring option '-M'; no argument required |
# The diagnosis changed in icc 8.0: |
# icc: Command line remark: option '-MP' not supported |
if (grep 'ignoring option' conftest.err || |
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else |
am_cv_CC_dependencies_compiler_type=$depmode |
break |
fi |
fi |
done |
|
cd .. |
rm -rf conftest.dir |
else |
am_cv_CC_dependencies_compiler_type=none |
fi |
|
fi |
{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } |
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
|
if |
test "x$enable_dependency_tracking" != xno \ |
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then |
am__fastdepCC_TRUE= |
am__fastdepCC_FALSE='#' |
else |
am__fastdepCC_TRUE='#' |
am__fastdepCC_FALSE= |
fi |
|
|
if test -z "$CC"; then |
# Extract the first word of "cc", so it can be a program name with args. |
set dummy cc; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_CC+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
ac_prog_rejected=no |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
ac_prog_rejected=yes |
continue |
fi |
ac_cv_prog_CC="cc" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
if test $ac_prog_rejected = yes; then |
# We found a bogon in the path, so make sure we never use it. |
set dummy $ac_cv_prog_CC |
shift |
if test $# != 0; then |
# We chose a different compiler from the bogus one. |
# However, it has the same basename, so the bogon will be chosen |
# first if we set CC to just the basename; use the full file name. |
shift |
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" |
fi |
fi |
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
{ $as_echo "$as_me:$LINENO: result: $CC" >&5 |
$as_echo "$CC" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: no acceptable cc found in \$PATH" >&5 |
$as_echo "$as_me: error: no acceptable cc found in \$PATH" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
{ $as_echo "$as_me:$LINENO: checking whether we are using GNU C" >&5 |
$as_echo_n "checking whether we are using GNU C... " >&6; } |
if test "${ac_cv_c_compiler_gnu+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
cat > conftest.c <<EOF |
#ifdef __GNUC__ |
yes; |
#endif |
EOF |
if { ac_try='${CC-cc} -E conftest.c' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
$as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; } | egrep yes >/dev/null 2>&1; then |
ac_cv_c_compiler_gnu=yes |
else |
ac_cv_c_compiler_gnu=no |
fi |
fi |
{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
$as_echo "$ac_cv_c_compiler_gnu" >&6; } |
|
if test $ac_cv_c_compiler_gnu = yes; then |
GCC=yes |
ac_test_CFLAGS="${CFLAGS+set}" |
ac_save_CFLAGS="$CFLAGS" |
ac_test_CFLAGS=${CFLAGS+set} |
ac_save_CFLAGS=$CFLAGS |
{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
$as_echo_n "checking whether $CC accepts -g... " >&6; } |
if test "${ac_cv_prog_cc_g+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
ac_save_c_werror_flag=$ac_c_werror_flag |
ac_c_werror_flag=yes |
ac_cv_prog_cc_g=no |
CFLAGS="-g" |
cat >conftest.$ac_ext <<_ACEOF |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (ac_try="$ac_compile" |
case "(($ac_try" in |
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
*) ac_try_echo=$ac_try;; |
esac |
eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" |
$as_echo "$ac_try_echo") >&5 |
(eval "$ac_compile") 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
$as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && { |
test -z "$ac_c_werror_flag" || |
test ! -s conftest.err |
} && test -s conftest.$ac_objext; then |
ac_cv_prog_cc_g=yes |
else |
$as_echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
CFLAGS="" |
cat >conftest.$ac_ext <<_ACEOF |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (ac_try="$ac_compile" |
case "(($ac_try" in |
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
*) ac_try_echo=$ac_try;; |
esac |
eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" |
$as_echo "$ac_try_echo") >&5 |
(eval "$ac_compile") 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
$as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && { |
test -z "$ac_c_werror_flag" || |
test ! -s conftest.err |
} && test -s conftest.$ac_objext; then |
: |
else |
$as_echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_c_werror_flag=$ac_save_c_werror_flag |
CFLAGS="-g" |
cat >conftest.$ac_ext <<_ACEOF |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (ac_try="$ac_compile" |
case "(($ac_try" in |
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; |
*) ac_try_echo=$ac_try;; |
esac |
eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" |
$as_echo "$ac_try_echo") >&5 |
(eval "$ac_compile") 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
$as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && { |
test -z "$ac_c_werror_flag" || |
test ! -s conftest.err |
} && test -s conftest.$ac_objext; then |
ac_cv_prog_cc_g=yes |
else |
$as_echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
|
fi |
|
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
fi |
|
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
fi |
|
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext |
ac_c_werror_flag=$ac_save_c_werror_flag |
fi |
{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
$as_echo "$ac_cv_prog_cc_g" >&6; } |
if test "$ac_test_CFLAGS" = set; then |
CFLAGS=$ac_save_CFLAGS |
elif test $ac_cv_prog_cc_g = yes; then |
if test "$GCC" = yes; then |
CFLAGS="-g -O2" |
else |
CFLAGS="-g" |
fi |
else |
if test "$GCC" = yes; then |
CFLAGS="-O2" |
else |
CFLAGS= |
fi |
fi |
if test "$ac_test_CFLAGS" = set; then |
CFLAGS="$ac_save_CFLAGS" |
elif test $ac_cv_prog_cc_g = yes; then |
CFLAGS="-g -O2" |
else |
CFLAGS="-O2" |
fi |
else |
GCC= |
test "${CFLAGS+set}" = set || CFLAGS="-g" |
fi |
|
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. |
set dummy ${ac_tool_prefix}as; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_AS+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$AS"; then |
ac_cv_prog_AS="$AS" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_AS="${ac_tool_prefix}as" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
AS=$ac_cv_prog_AS |
if test -n "$AS"; then |
{ $as_echo "$as_me:$LINENO: result: $AS" >&5 |
$as_echo "$AS" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
fi |
if test -z "$ac_cv_prog_AS"; then |
ac_ct_AS=$AS |
# Extract the first word of "as", so it can be a program name with args. |
set dummy as; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_ac_ct_AS+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$ac_ct_AS"; then |
ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_ac_ct_AS="as" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
ac_ct_AS=$ac_cv_prog_ac_ct_AS |
if test -n "$ac_ct_AS"; then |
{ $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5 |
$as_echo "$ac_ct_AS" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
if test "x$ac_ct_AS" = x; then |
AS="" |
else |
case $cross_compiling:$ac_tool_warned in |
yes:) |
{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 |
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} |
ac_tool_warned=yes ;; |
esac |
AS=$ac_ct_AS |
fi |
else |
AS="$ac_cv_prog_AS" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. |
set dummy ${ac_tool_prefix}ar; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_AR+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$AR"; then |
ac_cv_prog_AR="$AR" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_AR="${ac_tool_prefix}ar" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
AR=$ac_cv_prog_AR |
if test -n "$AR"; then |
{ $as_echo "$as_me:$LINENO: result: $AR" >&5 |
$as_echo "$AR" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
fi |
if test -z "$ac_cv_prog_AR"; then |
ac_ct_AR=$AR |
# Extract the first word of "ar", so it can be a program name with args. |
set dummy ar; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$ac_ct_AR"; then |
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_ac_ct_AR="ar" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
ac_ct_AR=$ac_cv_prog_ac_ct_AR |
if test -n "$ac_ct_AR"; then |
{ $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 |
$as_echo "$ac_ct_AR" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
if test "x$ac_ct_AR" = x; then |
AR="" |
else |
case $cross_compiling:$ac_tool_warned in |
yes:) |
{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 |
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} |
ac_tool_warned=yes ;; |
esac |
AR=$ac_ct_AR |
fi |
else |
AR="$ac_cv_prog_AR" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. |
set dummy ${ac_tool_prefix}ranlib; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_RANLIB+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$RANLIB"; then |
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
RANLIB=$ac_cv_prog_RANLIB |
if test -n "$RANLIB"; then |
{ $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 |
$as_echo "$RANLIB" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
fi |
if test -z "$ac_cv_prog_RANLIB"; then |
ac_ct_RANLIB=$RANLIB |
# Extract the first word of "ranlib", so it can be a program name with args. |
set dummy ranlib; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$ac_ct_RANLIB"; then |
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_ac_ct_RANLIB="ranlib" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
if test -n "$ac_ct_RANLIB"; then |
{ $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
$as_echo "$ac_ct_RANLIB" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
if test "x$ac_ct_RANLIB" = x; then |
RANLIB=":" |
else |
case $cross_compiling:$ac_tool_warned in |
yes:) |
{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 |
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} |
ac_tool_warned=yes ;; |
esac |
RANLIB=$ac_ct_RANLIB |
fi |
else |
RANLIB="$ac_cv_prog_RANLIB" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}readelf", so it can be a program name with args. |
set dummy ${ac_tool_prefix}readelf; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_READELF+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$READELF"; then |
ac_cv_prog_READELF="$READELF" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_READELF="${ac_tool_prefix}readelf" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
READELF=$ac_cv_prog_READELF |
if test -n "$READELF"; then |
{ $as_echo "$as_me:$LINENO: result: $READELF" >&5 |
$as_echo "$READELF" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
|
fi |
if test -z "$ac_cv_prog_READELF"; then |
ac_ct_READELF=$READELF |
# Extract the first word of "readelf", so it can be a program name with args. |
set dummy readelf; ac_word=$2 |
{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 |
$as_echo_n "checking for $ac_word... " >&6; } |
if test "${ac_cv_prog_ac_ct_READELF+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
if test -n "$ac_ct_READELF"; then |
ac_cv_prog_ac_ct_READELF="$ac_ct_READELF" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then |
ac_cv_prog_ac_ct_READELF="readelf" |
$as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
IFS=$as_save_IFS |
|
fi |
fi |
ac_ct_READELF=$ac_cv_prog_ac_ct_READELF |
if test -n "$ac_ct_READELF"; then |
{ $as_echo "$as_me:$LINENO: result: $ac_ct_READELF" >&5 |
$as_echo "$ac_ct_READELF" >&6; } |
else |
{ $as_echo "$as_me:$LINENO: result: no" >&5 |
$as_echo "no" >&6; } |
fi |
|
if test "x$ac_ct_READELF" = x; then |
READELF=":" |
else |
case $cross_compiling:$ac_tool_warned in |
yes:) |
{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 |
$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} |
ac_tool_warned=yes ;; |
esac |
READELF=$ac_ct_READELF |
fi |
else |
READELF="$ac_cv_prog_READELF" |
fi |
|
|
# Find a good install program. We prefer a C program (faster), |
# so one script is as good as another. But avoid the broken or |
# incompatible versions: |
# SysV /etc/install, /usr/sbin/install |
# SunOS /usr/etc/install |
# IRIX /sbin/install |
# AIX /bin/install |
# AmigaOS /C/install, which installs bootblocks on floppy discs |
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
# OS/2's system install, which has a completely different semantic |
# ./install, which can be erroneously created by make from ./install.sh. |
# Reject install programs that cannot install multiple files. |
{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
$as_echo_n "checking for a BSD-compatible install... " >&6; } |
if test -z "$INSTALL"; then |
if test "${ac_cv_path_install+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
# Account for people who put trailing slashes in PATH elements. |
case $as_dir/ in |
./ | .// | /cC/* | \ |
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ |
/usr/ucb/* ) ;; |
*) |
# OSF1 and SCO ODT 3.0 have their own names for install. |
# Don't use installbsd from OSF since it installs stuff as root |
# by default. |
for ac_prog in ginstall scoinst install; do |
for ac_exec_ext in '' $ac_executable_extensions; do |
if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then |
if test $ac_prog = install && |
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# AIX install. It has an incompatible calling convention. |
: |
elif test $ac_prog = install && |
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# program-specific install script used by HP pwplus--don't use. |
: |
else |
rm -rf conftest.one conftest.two conftest.dir |
echo one > conftest.one |
echo two > conftest.two |
mkdir conftest.dir |
if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && |
test -s conftest.one && test -s conftest.two && |
test -s conftest.dir/conftest.one && |
test -s conftest.dir/conftest.two |
then |
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
break 3 |
fi |
fi |
fi |
done |
done |
;; |
esac |
|
done |
IFS=$as_save_IFS |
|
rm -rf conftest.one conftest.two conftest.dir |
|
fi |
if test "${ac_cv_path_install+set}" = set; then |
INSTALL=$ac_cv_path_install |
else |
# As a last resort, use the slow shell script. Don't cache a |
# value for INSTALL within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the value is a relative name. |
INSTALL=$ac_install_sh |
fi |
fi |
{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 |
$as_echo "$INSTALL" >&6; } |
|
# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
# It thinks the first close brace ends the variable substitution. |
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
|
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
|
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
|
|
# Hack to ensure that INSTALL won't be set to "../" with autoconf 2.13. */ |
ac_given_INSTALL=$INSTALL |
|
|
{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 |
$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } |
# Check whether --enable-maintainer-mode was given. |
if test "${enable_maintainer_mode+set}" = set; then |
enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval |
else |
USE_MAINTAINER_MODE=no |
fi |
|
{ $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 |
$as_echo "$USE_MAINTAINER_MODE" >&6; } |
if test $USE_MAINTAINER_MODE = yes; then |
MAINTAINER_MODE_TRUE= |
MAINTAINER_MODE_FALSE='#' |
else |
MAINTAINER_MODE_TRUE='#' |
MAINTAINER_MODE_FALSE= |
fi |
|
MAINT=$MAINTAINER_MODE_TRUE |
|
|
# By default we simply use the C compiler to build assembly code. |
|
test "${CCAS+set}" = set || CCAS=$CC |
test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS |
|
|
|
|
# We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
# at least currently, we never actually build a program, so we never |
# need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
# fails, because we are probably configuring with a cross compiler |
# which can't create executables. So we include AC_EXEEXT to keep |
# automake happy, but we don't execute it, since we don't care about |
# the result. |
if false; then |
|
dummy_var=1 |
fi |
|
. ${newlib_basedir}/configure.host |
|
newlib_cflags="${newlib_cflags} -fno-builtin" |
|
NEWLIB_CFLAGS=${newlib_cflags} |
|
|
LDFLAGS=${ldflags} |
|
|
if test x${newlib_elix_level} = x0; then |
ELIX_LEVEL_0_TRUE= |
ELIX_LEVEL_0_FALSE='#' |
else |
ELIX_LEVEL_0_TRUE='#' |
ELIX_LEVEL_0_FALSE= |
fi |
|
if test x${newlib_elix_level} = x1; then |
ELIX_LEVEL_1_TRUE= |
ELIX_LEVEL_1_FALSE='#' |
else |
ELIX_LEVEL_1_TRUE='#' |
ELIX_LEVEL_1_FALSE= |
fi |
|
if test x${newlib_elix_level} = x2; then |
ELIX_LEVEL_2_TRUE= |
ELIX_LEVEL_2_FALSE='#' |
else |
ELIX_LEVEL_2_TRUE='#' |
ELIX_LEVEL_2_FALSE= |
fi |
|
if test x${newlib_elix_level} = x3; then |
ELIX_LEVEL_3_TRUE= |
ELIX_LEVEL_3_FALSE='#' |
else |
ELIX_LEVEL_3_TRUE='#' |
ELIX_LEVEL_3_FALSE= |
fi |
|
if test x${newlib_elix_level} = x4; then |
ELIX_LEVEL_4_TRUE= |
ELIX_LEVEL_4_FALSE='#' |
else |
ELIX_LEVEL_4_TRUE='#' |
ELIX_LEVEL_4_FALSE= |
fi |
|
|
if test x${use_libtool} = xyes; then |
USE_LIBTOOL_TRUE= |
USE_LIBTOOL_FALSE='#' |
else |
USE_LIBTOOL_TRUE='#' |
USE_LIBTOOL_FALSE= |
fi |
|
|
# Hard-code OBJEXT. Normally it is set by AC_OBJEXT, but we |
# use oext, which is set in configure.host based on the target platform. |
OBJEXT=${oext} |
|
|
|
|
|
|
|
|
|
|
|
# Put a plausible default for CC_FOR_BUILD in Makefile. |
if test -z "$CC_FOR_BUILD"; then |
if test "x$cross_compiling" = "xno"; then |
CC_FOR_BUILD='$(CC)' |
else |
CC_FOR_BUILD=gcc |
fi |
fi |
|
|
# Also set EXEEXT_FOR_BUILD. |
if test "x$cross_compiling" = "xno"; then |
EXEEXT_FOR_BUILD='$(EXEEXT)' |
else |
{ $as_echo "$as_me:$LINENO: checking for build system executable suffix" >&5 |
$as_echo_n "checking for build system executable suffix... " >&6; } |
if test "${newlib_cv_build_exeext+set}" = set; then |
$as_echo_n "(cached) " >&6 |
else |
cat > ac_c_test.c << 'EOF' |
int main() { |
/* Nothing needed here */ |
} |
EOF |
${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5 |
newlib_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//` |
rm -f ac_c_test* |
test x"${newlib_cv_build_exeext}" = x && newlib_cv_build_exeext=no |
fi |
{ $as_echo "$as_me:$LINENO: result: $newlib_cv_build_exeext" >&5 |
$as_echo "$newlib_cv_build_exeext" >&6; } |
EXEEXT_FOR_BUILD="" |
test x"${newlib_cv_build_exeext}" != xno && EXEEXT_FOR_BUILD=${newlib_cv_build_exeext} |
fi |
|
|
ac_config_files="$ac_config_files Makefile" |
|
cat >confcache <<\_ACEOF |
# This file is a shell script that caches the results of configure |
# tests run on this system so they can be shared between configure |
# scripts and configure runs, see configure's option --config-cache. |
# It is not useful on other systems. If it contains results you don't |
# want to keep, you may remove or edit it. |
# |
# config.status only pays attention to the cache file if you give it |
# the --recheck option to rerun configure. |
# |
# `ac_cv_env_foo' variables (set or unset) will be overridden when |
# loading this file, other *unset* `ac_cv_foo' will be assigned the |
# following values. |
|
_ACEOF |
|
# The following way of writing the cache mishandles newlines in values, |
# but we know of no workaround that is simple, portable, and efficient. |
# So, we kill variables containing newlines. |
# Ultrix sh set writes to stderr and can't be redirected directly, |
# and sets the high bit in the cache file unless we assign to the vars. |
( |
for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do |
eval ac_val=\$$ac_var |
case $ac_val in #( |
*${as_nl}*) |
case $ac_var in #( |
*_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 |
$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; |
esac |
case $ac_var in #( |
_ | IFS | as_nl) ;; #( |
BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( |
*) $as_unset $ac_var ;; |
esac ;; |
esac |
done |
|
(set) 2>&1 | |
case $as_nl`(ac_space=' '; set) 2>&1` in #( |
*${as_nl}ac_space=\ *) |
# `set' does not quote correctly, so add quotes (double-quote |
# substitution turns \\\\ into \\, and sed turns \\ into \). |
sed -n \ |
"s/'/'\\\\''/g; |
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
;; #( |
*) |
# `set' quotes correctly as required by POSIX, so do not add quotes. |
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" |
;; |
esac | |
sort |
) | |
sed ' |
/^ac_cv_env_/b end |
t clear |
:clear |
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
t end |
s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
:end' >>confcache |
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else |
if test -w "$cache_file"; then |
test "x$cache_file" != "x/dev/null" && |
{ $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 |
$as_echo "$as_me: updating cache $cache_file" >&6;} |
cat confcache >$cache_file |
else |
{ $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 |
$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} |
fi |
fi |
rm -f confcache |
|
test "x$prefix" = xNONE && prefix=$ac_default_prefix |
# Let make expand exec_prefix. |
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
|
# Transform confdefs.h into DEFS. |
# Protect against shell expansion while executing Makefile rules. |
# Protect against Makefile macro expansion. |
# |
# If the first sed substitution is executed (which looks for macros that |
# take arguments), then branch to the quote section. Otherwise, |
# look for a macro that doesn't take arguments. |
ac_script=' |
:mline |
/\\$/{ |
N |
s,\\\n,, |
b mline |
} |
t clear |
:clear |
s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g |
t quote |
s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g |
t quote |
b any |
:quote |
s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g |
s/\[/\\&/g |
s/\]/\\&/g |
s/\$/$$/g |
H |
:any |
${ |
g |
s/^\n// |
s/\n/ /g |
p |
} |
' |
DEFS=`sed -n "$ac_script" confdefs.h` |
|
|
ac_libobjs= |
ac_ltlibobjs= |
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
# 1. Remove the extension, and $U if already installed. |
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' |
ac_i=`$as_echo "$ac_i" | sed "$ac_script"` |
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR |
# will be set to the directory where LIBOBJS objects are built. |
ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" |
ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' |
done |
LIBOBJS=$ac_libobjs |
|
LTLIBOBJS=$ac_ltlibobjs |
|
|
if test -z "${MAY_SUPPLY_SYSCALLS_TRUE}" && test -z "${MAY_SUPPLY_SYSCALLS_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"MAY_SUPPLY_SYSCALLS\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"MAY_SUPPLY_SYSCALLS\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${ELIX_LEVEL_0_TRUE}" && test -z "${ELIX_LEVEL_0_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_0\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"ELIX_LEVEL_0\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${ELIX_LEVEL_1_TRUE}" && test -z "${ELIX_LEVEL_1_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_1\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"ELIX_LEVEL_1\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${ELIX_LEVEL_2_TRUE}" && test -z "${ELIX_LEVEL_2_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_2\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"ELIX_LEVEL_2\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${ELIX_LEVEL_3_TRUE}" && test -z "${ELIX_LEVEL_3_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_3\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"ELIX_LEVEL_3\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${ELIX_LEVEL_4_TRUE}" && test -z "${ELIX_LEVEL_4_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"ELIX_LEVEL_4\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"ELIX_LEVEL_4\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${USE_LIBTOOL_TRUE}" && test -z "${USE_LIBTOOL_FALSE}"; then |
{ { $as_echo "$as_me:$LINENO: error: conditional \"USE_LIBTOOL\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
$as_echo "$as_me: error: conditional \"USE_LIBTOOL\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
: ${CONFIG_STATUS=./config.status} |
ac_write_fail=0 |
ac_clean_files_save=$ac_clean_files |
ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 |
$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} |
cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 |
#! $SHELL |
# Generated by $as_me. |
# Run this file to recreate the current configuration. |
# Compiler output produced by configure, useful for debugging |
# configure, is in config.log if it exists. |
|
debug=false |
ac_cs_recheck=false |
ac_cs_silent=false |
SHELL=\${CONFIG_SHELL-$SHELL} |
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 |
## --------------------- ## |
## M4sh Initialization. ## |
## --------------------- ## |
|
# Be more Bourne compatible |
DUALCASE=1; export DUALCASE # for MKS sh |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
setopt NO_GLOB_SUBST |
else |
case `(set -o) 2>/dev/null` in |
*posix*) set -o posix ;; |
esac |
|
fi |
|
|
|
|
# PATH needs CR |
# Avoid depending upon Character Ranges. |
as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
as_cr_digits='0123456789' |
as_cr_alnum=$as_cr_Letters$as_cr_digits |
|
as_nl=' |
' |
export as_nl |
# Printing a long string crashes Solaris 7 /usr/bin/printf. |
as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo |
as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo |
if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then |
as_echo='printf %s\n' |
as_echo_n='printf %s' |
else |
if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then |
as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' |
as_echo_n='/usr/ucb/echo -n' |
else |
as_echo_body='eval expr "X$1" : "X\\(.*\\)"' |
as_echo_n_body='eval |
arg=$1; |
case $arg in |
*"$as_nl"*) |
expr "X$arg" : "X\\(.*\\)$as_nl"; |
arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; |
esac; |
expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" |
' |
export as_echo_n_body |
as_echo_n='sh -c $as_echo_n_body as_echo' |
fi |
export as_echo_body |
as_echo='sh -c $as_echo_body as_echo' |
fi |
|
# The user is always right. |
if test "${PATH_SEPARATOR+set}" != set; then |
PATH_SEPARATOR=: |
(PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { |
(PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || |
PATH_SEPARATOR=';' |
} |
fi |
|
# Support unset when possible. |
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then |
as_unset=unset |
else |
as_unset=false |
fi |
|
|
# IFS |
# We need space, tab and new line, in precisely that order. Quoting is |
# there to prevent editors from complaining about space-tab. |
# (If _AS_PATH_WALK were called with IFS unset, it would disable word |
# splitting by setting IFS to empty value.) |
IFS=" "" $as_nl" |
|
# Find who we are. Look in the path if we contain no directory separator. |
case $0 in |
*[\\/]* ) as_myself=$0 ;; |
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
done |
IFS=$as_save_IFS |
|
;; |
esac |
# We did not find ourselves, most probably we were run as `sh COMMAND' |
# in which case we are not to be found in the path. |
if test "x$as_myself" = x; then |
as_myself=$0 |
fi |
if test ! -f "$as_myself"; then |
$as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 |
{ (exit 1); exit 1; } |
fi |
|
# Work around bugs in pre-3.0 UWIN ksh. |
for as_var in ENV MAIL MAILPATH |
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var |
done |
PS1='$ ' |
PS2='> ' |
PS4='+ ' |
|
# NLS nuisances. |
LC_ALL=C |
export LC_ALL |
LANGUAGE=C |
export LANGUAGE |
|
# Required to use basename. |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then |
as_basename=basename |
else |
as_basename=false |
fi |
|
|
# Name of the executable. |
as_me=`$as_basename -- "$0" || |
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)' \| . 2>/dev/null || |
$as_echo X/"$0" | |
sed '/^.*\/\([^/][^/]*\)\/*$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\/\)$/{ |
s//\1/ |
q |
} |
/^X\/\(\/\).*/{ |
s//\1/ |
q |
} |
s/.*/./; q'` |
|
# CDPATH. |
$as_unset CDPATH |
|
|
|
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { |
|
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
# uniformly replaced by the line number. The first 'sed' inserts a |
# line-number line after each line using $LINENO; the second 'sed' |
# does the real work. The second script uses 'N' to pair each |
# line-number line with the line containing $LINENO, and appends |
# trailing '-' during substitution so that $LINENO is not a special |
# case at line end. |
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
# scripts with optimization help from Paolo Bonzini. Blame Lee |
# E. McMahon (1931-1989) for sed's syntax. :-) |
sed -n ' |
p |
/[$]LINENO/= |
' <$as_myself | |
sed ' |
s/[$]LINENO.*/&-/ |
t lineno |
b |
:lineno |
N |
:loop |
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ |
t loop |
s/-\n.*// |
' >$as_me.lineno && |
chmod +x "$as_me.lineno" || |
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
{ (exit 1); exit 1; }; } |
|
# Don't try to exec as it changes $[0], causing all sort of problems |
# (the dirname of $[0] is not the place where we might find the |
# original and so on. Autoconf is especially sensitive to this). |
. "./$as_me.lineno" |
# Exit status is that of the last command. |
exit |
} |
|
|
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then |
as_dirname=dirname |
else |
as_dirname=false |
fi |
|
ECHO_C= ECHO_N= ECHO_T= |
case `echo -n x` in |
-n*) |
case `echo 'x\c'` in |
*c*) ECHO_T=' ';; # ECHO_T is single tab character. |
*) ECHO_C='\c';; |
esac;; |
*) |
ECHO_N='-n';; |
esac |
if expr a : '\(a\)' >/dev/null 2>&1 && |
test "X`expr 00001 : '.*\(...\)'`" = X001; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
rm -f conf$$ conf$$.exe conf$$.file |
if test -d conf$$.dir; then |
rm -f conf$$.dir/conf$$.file |
else |
rm -f conf$$.dir |
mkdir conf$$.dir 2>/dev/null |
fi |
if (echo >conf$$.file) 2>/dev/null; then |
if ln -s conf$$.file conf$$ 2>/dev/null; then |
as_ln_s='ln -s' |
# ... but there are two gotchas: |
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. |
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. |
# In both cases, we have to default to `cp -p'. |
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || |
as_ln_s='cp -p' |
elif ln conf$$.file conf$$ 2>/dev/null; then |
as_ln_s=ln |
else |
as_ln_s='cp -p' |
fi |
else |
as_ln_s='cp -p' |
fi |
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file |
rmdir conf$$.dir 2>/dev/null |
|
if mkdir -p . 2>/dev/null; then |
as_mkdir_p=: |
else |
test -d ./-p && rmdir ./-p |
as_mkdir_p=false |
fi |
|
if test -x / >/dev/null 2>&1; then |
as_test_x='test -x' |
else |
if ls -dL / >/dev/null 2>&1; then |
as_ls_L_option=L |
else |
as_ls_L_option= |
fi |
as_test_x=' |
eval sh -c '\'' |
if test -d "$1"; then |
test -d "$1/."; |
else |
case $1 in |
-*)set "./$1";; |
esac; |
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in |
???[sx]*):;;*)false;;esac;fi |
'\'' sh |
' |
fi |
as_executable_p=$as_test_x |
|
# Sed expression to map a string onto a valid CPP name. |
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" |
|
# Sed expression to map a string onto a valid variable name. |
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" |
|
|
exec 6>&1 |
|
# Save the log message, to keep $[0] and so on meaningful, and to |
# report actual input values of CONFIG_FILES etc. instead of their |
# values after options handling. |
ac_log=" |
This file was extended by newlib $as_me 1.18.0, which was |
generated by GNU Autoconf 2.63. Invocation command line was |
|
CONFIG_FILES = $CONFIG_FILES |
CONFIG_HEADERS = $CONFIG_HEADERS |
CONFIG_LINKS = $CONFIG_LINKS |
CONFIG_COMMANDS = $CONFIG_COMMANDS |
$ $0 $@ |
|
on `(hostname || uname -n) 2>/dev/null | sed 1q` |
" |
|
_ACEOF |
|
case $ac_config_files in *" |
"*) set x $ac_config_files; shift; ac_config_files=$*;; |
esac |
|
|
|
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 |
# Files that config.status was made for. |
config_files="$ac_config_files" |
config_commands="$ac_config_commands" |
|
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 |
ac_cs_usage="\ |
\`$as_me' instantiates files from templates according to the |
current configuration. |
|
Usage: $0 [OPTION]... [FILE]... |
|
-h, --help print this help, then exit |
-V, --version print version number and configuration settings, then exit |
-q, --quiet, --silent |
do not print progress messages |
-d, --debug don't remove temporary files |
--recheck update $as_me by reconfiguring in the same conditions |
--file=FILE[:TEMPLATE] |
instantiate the configuration file FILE |
|
Configuration files: |
$config_files |
|
Configuration commands: |
$config_commands |
|
Report bugs to <bug-autoconf@gnu.org>." |
|
_ACEOF |
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 |
ac_cs_version="\\ |
newlib config.status 1.18.0 |
configured by $0, generated by GNU Autoconf 2.63, |
with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" |
|
Copyright (C) 2008 Free Software Foundation, Inc. |
This config.status script is free software; the Free Software Foundation |
gives unlimited permission to copy, distribute and modify it." |
|
ac_pwd='$ac_pwd' |
srcdir='$srcdir' |
INSTALL='$INSTALL' |
MKDIR_P='$MKDIR_P' |
AWK='$AWK' |
test -n "\$AWK" || AWK=awk |
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 |
# The default lists apply if the user does not specify any file. |
ac_need_defaults=: |
while test $# != 0 |
do |
case $1 in |
--*=*) |
ac_option=`expr "X$1" : 'X\([^=]*\)='` |
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` |
ac_shift=: |
;; |
*) |
ac_option=$1 |
ac_optarg=$2 |
ac_shift=shift |
;; |
esac |
|
case $ac_option in |
# Handling of the options. |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
ac_cs_recheck=: ;; |
--version | --versio | --versi | --vers | --ver | --ve | --v | -V ) |
$as_echo "$ac_cs_version"; exit ;; |
--debug | --debu | --deb | --de | --d | -d ) |
debug=: ;; |
--file | --fil | --fi | --f ) |
$ac_shift |
case $ac_optarg in |
*\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; |
esac |
CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" |
ac_need_defaults=false;; |
--he | --h | --help | --hel | -h ) |
$as_echo "$ac_cs_usage"; exit ;; |
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil | --si | --s) |
ac_cs_silent=: ;; |
|
# This is an error. |
-*) { $as_echo "$as_me: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&2 |
{ (exit 1); exit 1; }; } ;; |
|
*) ac_config_targets="$ac_config_targets $1" |
ac_need_defaults=false ;; |
|
esac |
shift |
done |
|
ac_configure_extra_args= |
|
if $ac_cs_silent; then |
exec 6>/dev/null |
ac_configure_extra_args="$ac_configure_extra_args --silent" |
fi |
|
_ACEOF |
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 |
if \$ac_cs_recheck; then |
set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
shift |
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 |
CONFIG_SHELL='$SHELL' |
export CONFIG_SHELL |
exec "\$@" |
fi |
|
_ACEOF |
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 |
exec 5>>config.log |
{ |
echo |
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
## Running $as_me. ## |
_ASBOX |
$as_echo "$ac_log" |
} >&5 |
|
_ACEOF |
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 |
# |
# INIT-COMMANDS |
# |
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" |
|
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 |
|
# Handling of arguments. |
for ac_config_target in $ac_config_targets |
do |
case $ac_config_target in |
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
|
*) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
done |
|
|
# If the user did not use the arguments to specify the items to instantiate, |
# then the envvar interface is used. Set only those that are not. |
# We use the long form for the default assignment because of an extremely |
# bizarre bug on SunOS 4.1.3. |
if $ac_need_defaults; then |
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands |
fi |
|
# Have a temporary directory for convenience. Make it in the build tree |
# simply because there is no reason against having it here, and in addition, |
# creating and moving files from /tmp can sometimes cause problems. |
# Hook for its removal unless debugging. |
# Note that there is a small window in which the directory will not be cleaned: |
# after its creation but before its name has been assigned to `$tmp'. |
$debug || |
{ |
tmp= |
trap 'exit_status=$? |
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status |
' 0 |
trap '{ (exit 1); exit 1; }' 1 2 13 15 |
} |
# Create a (secure) tmp directory for tmp files. |
|
{ |
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && |
test -n "$tmp" && test -d "$tmp" |
} || |
{ |
tmp=./conf$$-$RANDOM |
(umask 077 && mkdir "$tmp") |
} || |
{ |
$as_echo "$as_me: cannot create a temporary directory in ." >&2 |
{ (exit 1); exit 1; } |
} |
|
# Set up the scripts for CONFIG_FILES section. |
# No need to generate them if there are no CONFIG_FILES. |
# This happens for instance with `./config.status config.h'. |
if test -n "$CONFIG_FILES"; then |
|
|
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 520)
@@ -0,0 +1,332 @@
+# Makefile.in generated by automake 1.11 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
+ $(top_srcdir)/configure $(am__configure_deps) \
+ $(srcdir)/../../mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/../acinclude.m4 \
+ $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+depcomp =
+am__depfiles_maybe =
+SOURCES =
+DATA = $(noinst_DATA)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+READELF = @READELF@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+aext = @aext@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+libm_machine_dir = @libm_machine_dir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lpfx = @lpfx@
+machine_dir = @machine_dir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+newlib_basedir = @newlib_basedir@
+oext = @oext@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sys_dir = @sys_dir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AUTOMAKE_OPTIONS = cygnus
+
+# We can't use noinst_PROGRAMS, because automake will add $(EXEEXT).
+noinst_DATA = makedoc
+MKDOC = makedoc$(EXEEXT_FOR_BUILD)
+ACLOCAL_AMFLAGS = -I .. -I ../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+all: all-am
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --cygnus'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --cygnus \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --cygnus Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+check-am:
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am am--refresh check check-am clean clean-generic \
+ distclean distclean-generic dvi dvi-am html html-am info \
+ info-am install install-am install-data install-data-am \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am
+
+
+# We don't use CFLAGS with CC_FOR_BUILD because here CFLAGS will
+# actually be CFLAGS_FOR_TARGET, and in some cases that will include
+# -Os, which CC_FOR_BUILD may not recognize.
+
+$(MKDOC): makedoc.o
+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS) -o $(MKDOC) makedoc.o
+
+makedoc.o: makedoc.c
+ $(CC_FOR_BUILD) -g $(CFLAGS_FOR_BUILD) -c $(srcdir)/makedoc.c
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: makedoc.c
===================================================================
--- makedoc.c (nonexistent)
+++ makedoc.c (revision 520)
@@ -0,0 +1,1475 @@
+/* chew
+ Copyright (C) 1990-1992 Free Software Foundation, Inc.
+ Contributed by steve chamberlain @cygnus
+
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/*
+ Yet another way of extracting documentation from source.
+ No, I haven't finished it yet, but I hope you people like it better
+ that the old way
+
+ sac
+
+Basically, this is a sort of string forth, maybe we should call it
+struth?
+
+You define new words thus:
+: ;
+There is no
+
+*/
+
+
+
+#include "ansidecl.h"
+#include
+#include
+#include
+#include
+
+#define DEF_SIZE 5000
+#define STACK 50
+#define MIN_CMDLEN 4 /* Minimum length of a command */
+
+int internal_wanted;
+int internal_mode;
+int Verbose=0;
+
+
+
+/* Here is a string type ... */
+
+typedef struct buffer
+{
+ char *ptr;
+ unsigned int write_idx;
+ unsigned int size;
+} string_type;
+
+
+
+
+
+
+
+static void DEFUN(init_string_with_size,(buffer, size),
+ string_type *buffer AND
+ unsigned int size )
+{
+ buffer->write_idx = 0;
+ buffer->size = size;
+ buffer->ptr = malloc(size);
+}
+
+static void DEFUN(init_string,(buffer),
+ string_type *buffer)
+{
+ init_string_with_size(buffer, DEF_SIZE);
+
+}
+
+static int DEFUN(find, (str, what),
+ string_type *str AND
+ char *what)
+{
+ unsigned int i;
+ char *p;
+ p = what;
+ for (i = 0; i < str->write_idx && *p; i++)
+ {
+ if (*p == str->ptr[i])
+ p++;
+ else
+ p = what;
+ }
+ return (*p == 0);
+
+}
+
+static void DEFUN(write_buffer,(buffer),
+ string_type *buffer)
+{
+ fwrite(buffer->ptr, buffer->write_idx, 1, stdout);
+}
+
+
+static void DEFUN(delete_string,(buffer),
+ string_type *buffer)
+{
+ free(buffer->ptr);
+}
+
+
+static char *DEFUN(addr, (buffer, idx),
+ string_type *buffer AND
+ unsigned int idx)
+{
+ return buffer->ptr + idx;
+}
+
+static char DEFUN(at,(buffer, pos),
+ string_type *buffer AND
+ unsigned int pos)
+{
+ if ( pos >= buffer->write_idx)
+ {
+ return 0;
+ }
+ return buffer->ptr[pos];
+}
+
+static void DEFUN(catchar,(buffer, ch),
+ string_type *buffer AND
+ char ch)
+{
+ if (buffer->write_idx == buffer->size)
+ {
+ buffer->size *=2;
+ buffer->ptr = realloc(buffer->ptr, buffer->size);
+ }
+
+ buffer->ptr[buffer->write_idx ++ ] = ch;
+}
+
+
+static void DEFUN(overwrite_string,(dst, src),
+ string_type *dst AND
+ string_type *src)
+{
+ free(dst->ptr);
+ dst->size = src->size;
+ dst->write_idx = src->write_idx;
+ dst->ptr = src->ptr;
+}
+
+static void DEFUN(catstr,(dst, src),
+ string_type *dst AND
+ string_type *src)
+{
+ unsigned int i;
+ for (i = 0; i < src->write_idx; i++)
+ {
+ catchar(dst, src->ptr[i]);
+ }
+}
+
+
+static void DEFUN(cattext,(buffer, string),
+ string_type *buffer AND
+ char *string)
+{
+
+ while (*string)
+ {
+ catchar(buffer, *string);
+ string++;
+ }
+}
+
+static void DEFUN(catbuf,(buffer, buf, len),
+ string_type *buffer AND
+ char *buf AND
+ unsigned int len)
+{
+
+ while (len--)
+ {
+ catchar(buffer, *buf);
+ buf++;
+ }
+}
+
+
+
+static unsigned int
+DEFUN(skip_white_and_stars,(src, idx),
+ string_type *src AND
+ unsigned int idx)
+{
+ while (isspace(at(src,idx))
+ || (at(src,idx) == '*' && at(src,idx +1) !='/'))
+ idx++;
+ return idx;
+
+
+}
+/***********************************************************************/
+
+
+string_type stack[STACK];
+string_type *tos;
+
+unsigned int idx = 0; /* Pos in input buffer */
+string_type *ptr; /* and the buffer */
+typedef void (*stinst_type)(NOARGS);
+stinst_type *pc;
+stinst_type sstack[STACK];
+stinst_type *ssp = &sstack[0];
+int istack[STACK];
+int *isp = &istack[0];
+
+typedef int *word_type;
+
+
+
+struct dict_struct
+{
+ char *word;
+ struct dict_struct *next;
+ stinst_type *code;
+ int code_length;
+ int code_end;
+ int var;
+
+};
+typedef struct dict_struct dict_type;
+#define WORD(x) static void x(NOARGS)
+
+static void DEFUN(exec,(word),
+ dict_type *word)
+{
+ pc = word->code;
+ while (*pc)
+ {
+ (*pc)();
+ }
+
+}
+WORD(call)
+{
+stinst_type *oldpc = pc;
+ dict_type *e;
+ e = (dict_type *)(pc [1]);
+ exec(e);
+ pc = oldpc + 2;
+
+}
+
+WORD(remchar)
+{
+ tos->write_idx--;
+ pc++;
+
+}
+
+WORD(push_number)
+{
+ isp++;
+ pc++;
+ *isp = (int)(*pc);
+ pc++;
+
+}
+
+
+
+
+WORD(push_text)
+{
+
+ tos++;
+ init_string(tos);
+ pc++;
+ cattext(tos,*((char **)pc));
+ pc++;
+
+}
+
+
+
+/* This function removes everything not inside comments starting on
+ the first char of the line from the string, also when copying
+ comments, removes blank space and leading *'s
+ Blank lines are turned into one blank line
+ */
+
+static void
+DEFUN(remove_noncomments,(src,dst),
+ string_type *src AND
+ string_type *dst)
+{
+ unsigned int idx = 0;
+
+ while (at(src,idx))
+ {
+ /* Now see if we have a comment at the start of the line */
+ if (at(src,idx) == '\n'
+ && at(src,idx+1) == '/'
+ && at(src,idx+2) == '*')
+ {
+ idx+=3;
+
+ idx = skip_white_and_stars(src,idx);
+
+ /* Remove leading dot */
+ if (at(src, idx) == '.')
+ idx++;
+
+ /* Copy to the end of the line, or till the end of the
+ comment */
+ while (at(src, idx))
+ {
+ if (at(src, idx) == '\n')
+ {
+ /* end of line, echo and scrape of leading blanks */
+ if (at(src,idx +1) == '\n')
+ catchar(dst,'\n');
+ catchar(dst,'\n');
+ idx++;
+ idx = skip_white_and_stars(src, idx);
+ }
+ else if (at(src, idx) == '*' && at(src,idx+1) == '/')
+ {
+ idx +=2 ;
+ cattext(dst,"\nENDDD\n");
+ break;
+ }
+ else
+ {
+ catchar(dst, at(src, idx));
+ idx++;
+ }
+ }
+ }
+ else idx++;
+ }
+}
+/* turn foobar name(stuff); into foobar EXFUN(name,(stuff));
+
+ */
+
+static void
+DEFUN_VOID(exfunstuff)
+{
+ unsigned int openp;
+ unsigned int fname;
+ unsigned int idx;
+ string_type out;
+ init_string(&out);
+
+
+ /* make sure that it's not already exfuned */
+ if(find(tos,"EXFUN") || find(tos,"PROTO") || !find(tos,"(")) {
+ catstr(&out,tos);
+ }
+ else
+ {
+
+ /*Find the open paren*/
+ for (openp = 0; at(tos, openp) != '(' && at(tos,openp); openp++)
+ ;
+
+ fname = openp;
+ /* Step back to the fname */
+ fname--;
+ while (fname && isspace(at(tos, fname)))
+ fname --;
+ while (fname && !isspace(at(tos,fname)) && at(tos,fname) != '*')
+ fname--;
+
+ fname++;
+
+ for (idx = 0; idx < fname; idx++)
+ {
+ catchar(&out, at(tos,idx));
+ }
+
+ cattext(&out,"EXFUN(");
+ for (idx = fname; idx < openp; idx++)
+ {
+ catchar(&out, at(tos,idx));
+ }
+ cattext(&out,", ");
+ while (at(tos,idx) && at(tos,idx) !=';')
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ cattext(&out,");\n");
+ }
+ overwrite_string(tos, &out);
+ pc++;
+
+}
+
+
+
+/* turn {*
+ and *} into comments */
+
+WORD(translatecomments)
+{
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+
+ while (at(tos, idx))
+ {
+ if (at(tos,idx) == '{' && at(tos,idx+1) =='*')
+ {
+ cattext(&out," /*");
+ idx+=2;
+ }
+ else if (at(tos,idx) == '*' && at(tos,idx+1) =='}')
+ {
+ cattext(&out,"*/");
+ idx+=2;
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+
+
+ overwrite_string(tos, &out);
+
+ pc++;
+
+}
+
+/* find something like
+ QUICKREF
+ memchar ansi pure
+
+ into
+ merge with words on tos and output them to stderror
+
+*/
+WORD(quickref)
+{
+ string_type *nos = tos-1;
+ unsigned int nosscan = 0;
+ unsigned int idx = 0;
+
+ while (at(tos, idx))
+ {
+ if (at(tos,idx) == '~')
+ {
+ /* Skip the whitespace */
+ while (at(nos, nosscan) == ' ')
+ nosscan++;
+
+ /* Sub the next word from the nos*/
+ while (at(nos, nosscan) != ' ' &&
+ at(nos, nosscan) != 0)
+ {
+ fprintf(stderr, "%c", at(nos, nosscan));
+ nosscan++;
+ }
+ }
+
+ else
+ {
+ fprintf(stderr,"%c", at(tos, idx));
+
+ }
+ idx++;
+ }
+
+ delete_string(tos);
+ delete_string(nos);
+ tos-=2;
+ pc++;
+
+}
+
+#if 0
+/* turn everything not starting with a . into a comment */
+
+WORD(manglecomments)
+{
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+
+ while (at(tos, idx))
+ {
+ if (at(tos,idx) == '\n' && at(tos,idx+1) =='*')
+ {
+ cattext(&out," /*");
+ idx+=2;
+ }
+ else if (at(tos,idx) == '*' && at(tos,idx+1) =='}')
+ {
+ cattext(&out,"*/");
+ idx+=2;
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+
+
+ overwrite_string(tos, &out);
+
+ pc++;
+
+}
+#endif
+
+/* Mod tos so that only lines with leading dots remain */
+static void
+DEFUN_VOID(outputdots)
+{
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+
+ while (at(tos, idx))
+ {
+ if (at(tos, idx) == '\n' && at(tos, idx+1) == '.')
+ {
+ idx += 2;
+
+ while (at(tos, idx) && at(tos, idx)!='\n')
+ {
+ if (at(tos,idx) == '{' && at(tos,idx+1) =='*')
+ {
+ cattext(&out," /*");
+ idx+=2;
+ }
+ else if (at(tos,idx) == '*' && at(tos,idx+1) =='}')
+ {
+ cattext(&out,"*/");
+ idx+=2;
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+ catchar(&out,'\n');
+ }
+ else
+ {
+ idx++;
+ }
+ }
+
+ overwrite_string(tos, &out);
+ pc++;
+
+}
+
+/* Find lines starting with . and | and put example around them on tos
+ turn
+ {* into open comment and *} into close comment
+ escape curlies
+
+*/
+WORD(courierize)
+{
+ string_type out;
+ unsigned int idx = 0;
+
+ init_string(&out);
+
+ while (at(tos, idx))
+ {
+ if (at(tos, idx) == '\n'
+ && (at(tos, idx +1 ) == '.'
+ || at(tos,idx+1) == '|'))
+ {
+ cattext(&out,"\n@smallexample\n");
+ do
+ {
+ idx += 2;
+
+ while (at(tos, idx) && at(tos, idx)!='\n')
+ {
+ if (at(tos,idx)=='{' && at(tos,idx+1) =='*')
+ {
+ cattext(&out," /*");
+ idx+=2;
+ }
+ else if (at(tos,idx)=='*' && at(tos,idx+1) =='}')
+ {
+ cattext(&out,"*/");
+ idx+=2;
+ }
+ else if (at(tos,idx) == '{')
+ {
+ cattext(&out,"@{");
+ idx++;
+ }
+ else if (at(tos,idx) == '}')
+ {
+ cattext(&out,"@}");
+ idx++;
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+
+ }
+ catchar(&out,'\n');
+ }
+ while (at(tos, idx) == '\n'
+ && (at(tos, idx+1) == '.')
+ || (at(tos,idx+1) == '|'));
+ cattext(&out,"@end smallexample");
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+
+ overwrite_string(tos, &out);
+ pc++;
+
+
+}
+
+/*
+bulletize: look for bullet item commands at start of line
+ Bullet list:
+ O+ emit @itemize @bullet
+ o emit @item [note lowercase]
+ O- emit @end itemize
+
+ Variable label list:
+ o+ emit @table @code
+ o emit @item
+ o- emit @end table
+*/
+
+
+WORD(bulletize)
+{
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+
+ while (at(tos, idx)) {
+ if (at(tos, idx) == '\n' && at(tos, idx+1) == 'o')
+ {
+ if (at(tos,idx+2) == '+') {
+ cattext(&out,"\n@table @code\n");
+ idx+=3;
+ }
+ else if (at(tos,idx+2) == '-') {
+ cattext(&out,"\n@end table\n");
+ idx+=3;
+ }
+ else if (isspace(at(tos,idx+2))) {
+ cattext(&out,"\n@item ");
+ idx+=3;
+ }
+ else {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+
+ else
+ if (at(tos, idx) == '\n' && at(tos, idx+1) == 'O')
+ {
+ if (at(tos,idx+2) == '+') {
+ cattext(&out,"\n@itemize @bullet\n");
+ idx+=3;
+ }
+
+ else if (at(tos,idx+2) == '-') {
+ cattext(&out,"\n@end itemize\n");
+ idx+=3;
+ }
+ else {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+
+ delete_string(tos);
+ *tos = out;
+ pc++;
+
+}
+
+/* Turn <> into @code{foo} in place at TOS
+ Turn <[foo]> into @var{foo} in place at TOS
+ nest them too !
+
+*/
+
+
+WORD(do_fancy_stuff)
+ {
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+ while (at(tos, idx))
+ {
+ if (at(tos, idx) == '<'
+ && at(tos, idx+1) == '<'
+ && (!isspace(at(tos,idx + 2)) || at(tos,idx+3) == '>'))
+ {
+ /* This qualifies as a << startup */
+ idx +=2;
+ cattext(&out,"@code{");
+ }
+
+ else if (at(tos, idx) == '<'
+ && at(tos, idx+1) == '['
+ && !isspace(at(tos,idx + 2)))
+ {
+ /* This qualifies as a <[ startup */
+ idx +=2;
+ cattext(&out,"@var{");
+ }
+ else if (at(tos, idx) == '>'
+ && at(tos,idx+1) =='>')
+ {
+
+ cattext(&out,"}");
+ idx+=2;
+ }
+ else if (at(tos, idx) == ']'
+ && at(tos,idx+1) =='>')
+ {
+ cattext(&out,"}");
+ idx+=2;
+ }
+ else
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ }
+ delete_string(tos);
+ *tos = out;
+ pc++;
+
+}
+/* A command is all upper case,and alone on a line */
+static int
+DEFUN( iscommand,(ptr, idx),
+ string_type *ptr AND
+ unsigned int idx)
+{
+ unsigned int len = 0;
+ while (at(ptr,idx)) {
+ if (isupper(at(ptr,idx)) || at(ptr,idx) == ' ' ||
+ at(ptr,idx) == '_')
+ {
+ len++;
+ idx++;
+ }
+ else if(at(ptr,idx) == '\n')
+ {
+ /* The length check will never fail on a real command
+ * because the commands are screened as the definitions file
+ * is read. */
+ if (len >= MIN_CMDLEN) return 1;
+ return 0;
+ }
+ else return 0;
+ }
+ return 0;
+
+}
+
+
+unsigned int
+DEFUN(copy_past_newline,(ptr, idx, dst),
+ string_type *ptr AND
+ unsigned int idx AND
+ string_type *dst)
+{
+ while (at(ptr, idx) && at(ptr, idx) != '\n')
+ {
+ catchar(dst, at(ptr, idx));
+ idx++;
+
+ }
+ catchar(dst, at(ptr, idx));
+ idx++;
+ return idx;
+
+}
+
+WORD(icopy_past_newline)
+{
+ tos++;
+ init_string(tos);
+ idx = copy_past_newline(ptr, idx, tos);
+ pc++;
+}
+
+
+/* indent
+ Take the string at the top of the stack, do some prettying */
+
+
+
+
+WORD(kill_bogus_lines)
+{
+ int sl ;
+
+ int idx = 0;
+ int c;
+ int dot = 0 ;
+
+ string_type out;
+ init_string(&out);
+ /* Drop leading nl */
+ while (at(tos,idx) == '\n')
+ {
+ idx++;
+ }
+ c = idx;
+
+ /* Find the last char */
+ while (at(tos,idx))
+ {
+ idx++;
+ }
+
+ /* find the last non white before the nl */
+ idx--;
+
+ while (idx && isspace(at(tos,idx)))
+ idx--;
+ idx++;
+
+ /* Copy buffer upto last char, but blank lines before and after
+ dots don't count */
+ sl = 1;
+
+ while (c < idx)
+ {
+ if (at(tos,c) == '\n'
+ && at(tos,c+1) == '\n'
+ && at(tos,c+2) == '.')
+ {
+ /* Ignore two linelines before a dot*/
+ c++;
+ }
+ else if (at(tos,c) == '.' && sl)
+ {
+ /* remember that this line started with a dot */
+ dot=2;
+ }
+ else if (at(tos,c) == '\n'
+ && at(tos,c+1) == '\n'
+ && dot)
+ {
+ c++;
+ /* Ignore two newlines when last line was dot */
+ }
+
+ catchar(&out, at(tos,c));
+ if (at(tos,c) == '\n')
+ {
+ sl = 1;
+
+ if (dot == 2)dot=1;else dot = 0;
+ }
+
+ c++;
+
+ }
+
+ /* Append nl*/
+ catchar(&out, '\n');
+ pc++;
+ delete_string(tos);
+ *tos = out;
+
+
+}
+
+WORD(indent)
+{
+ string_type out;
+ int tab = 0;
+ int idx = 0;
+ int ol =0;
+ init_string(&out);
+ while (at(tos,idx)) {
+ switch (at(tos,idx))
+ {
+ case '\n':
+ cattext(&out,"\n");
+ idx++;
+ if (tab)
+ {
+ cattext(&out," ");
+ }
+ ol = 0;
+ break;
+ case '(':
+ tab++;
+ if (ol == 0)
+ cattext(&out," ");
+ idx++;
+ cattext(&out,"(");
+ ol = 1;
+ break;
+ case ')':
+ tab--;
+ cattext(&out,")");
+ idx++;
+ ol=1;
+
+ break;
+ default:
+ catchar(&out,at(tos,idx));
+ ol=1;
+
+ idx++;
+ break;
+ }
+ }
+
+ pc++;
+ delete_string(tos);
+ *tos = out;
+
+}
+
+/* Change the TOS so that all that is left is the stuff inside the
+ first <> .
+*/
+
+WORD(get_stuff_in_angle)
+{
+ unsigned int idx = 0;
+ string_type out;
+ init_string(&out);
+
+ while (at(tos, idx))
+ {
+ if (at(tos,idx) == '<' && at(tos,idx+1) =='<')
+ {
+ idx+=2;
+
+ while (!(at(tos,idx) == '>' && at(tos,idx+1) == '>'))
+ {
+ catchar(&out, at(tos, idx));
+ idx++;
+ }
+ break;
+ }
+ idx++;
+ }
+ catchar(&out,'\n');
+
+ overwrite_string(tos, &out);
+ pc++;
+}
+
+
+WORD(get_stuff_in_command)
+{
+ tos++;
+ init_string(tos);
+
+ while (at(ptr, idx)) {
+ if (iscommand(ptr, idx)) break;
+ idx = copy_past_newline(ptr, idx, tos);
+ }
+ pc++;
+}
+
+WORD(swap)
+{
+ string_type t;
+
+ t = tos[0];
+ tos[0] = tos[-1];
+ tos[-1] =t;
+ pc++;
+
+}
+
+WORD(dup)
+{
+ tos++;
+ init_string(tos);
+ catstr(tos, tos-1);
+ pc++;
+
+}
+
+
+
+WORD(icatstr)
+{
+ catstr(tos-1, tos);
+ delete_string(tos);
+ tos--;
+ pc++;
+
+}
+
+WORD(skip_past_newline)
+{
+ while (at(ptr,idx)
+ && at(ptr,idx) != '\n')
+ idx++;
+ idx++;
+ pc++;
+}
+
+
+WORD(internalmode)
+{
+ internal_mode = *(isp);
+ isp--;
+ pc++;
+}
+
+WORD(maybecatstr)
+{
+ if (internal_wanted == internal_mode)
+ {
+ catstr(tos-1, tos);
+ }
+ delete_string(tos);
+ tos--;
+ pc++;
+
+}
+
+char *
+DEFUN(nextword,(string, word),
+ char *string AND
+ char **word)
+{
+ char *word_start;
+ int idx;
+ char *dst;
+ char *src;
+
+ int length = 0;
+
+ while (isspace(*string) || *string == '-') {
+ if (*string == '-')
+ {
+ while (*string && *string != '\n')
+ string++;
+
+ }
+ else {
+ string++;
+ }
+ }
+ if (!*string) return 0;
+
+ word_start = string;
+ if (*string == '"')
+ {
+ string++;
+ length++;
+
+ while (*string != '"')
+ {
+ string++;
+ length++;
+ }
+ }
+ else
+ {
+
+
+ while (!isspace(*string))
+ {
+ string++;
+ length++;
+ }
+ }
+
+ *word = malloc(length + 1);
+
+ dst = *word;
+ src = word_start;
+
+
+ for (idx= 0; idx < length; idx++)
+ {
+
+ if (src[idx] == '\\' && src[idx+1] == 'n')
+ {
+ *dst++ = '\n';
+ idx++;
+
+ }
+ else *dst++ = src[idx];
+ }
+ *dst++ = 0;
+
+
+
+
+
+ if(*string)
+ return string + 1;
+ else
+ return 0;
+
+}
+dict_type *root;
+dict_type *
+DEFUN(lookup_word,(word),
+ char *word)
+{
+ dict_type *ptr = root;
+ while (ptr) {
+ if (strcmp(ptr->word, word) == 0) return ptr;
+ ptr = ptr->next;
+
+ }
+ fprintf(stderr,"Can't find %s\n",word);
+ return 0;
+
+
+}
+
+static void DEFUN_VOID(perform)
+{
+ tos = stack;
+
+ while (at(ptr, idx)) {
+ /* It's worth looking through the command list */
+ if (iscommand(ptr, idx))
+ {
+ char *next;
+ dict_type *word ;
+
+ (void) nextword(addr(ptr, idx), &next);
+
+
+ word = lookup_word(next);
+
+
+
+
+ if (word)
+ {
+ if(Verbose) fprintf(stderr, "CMD '%s'\n", word->word);
+ exec(word);
+ }
+ else
+ {
+ fprintf(stderr,"warning, %s is not recognised\n", next);
+ skip_past_newline();
+ }
+
+ }
+ else skip_past_newline();
+
+ }
+}
+
+dict_type *
+DEFUN(newentry,(word),
+ char *word)
+{
+ dict_type *new = (dict_type *)malloc(sizeof(dict_type));
+ new->word = word;
+ new->next = root;
+ root = new;
+ new->code = (stinst_type *)malloc(sizeof(stinst_type ));
+ new->code_length = 1;
+ new->code_end = 0;
+ return new;
+
+}
+
+
+unsigned int
+DEFUN(add_to_definition,(entry, word),
+ dict_type *entry AND
+ stinst_type word)
+{
+ if (entry->code_end == entry->code_length)
+ {
+ entry->code_length += 2;
+ entry->code =
+ (stinst_type *) realloc((char *)(entry->code),
+ entry->code_length *sizeof(word_type));
+ }
+ entry->code[entry->code_end] = word;
+
+return entry->code_end++;
+}
+
+
+
+
+
+
+
+void
+DEFUN(add_intrinsic,(name, func),
+ char *name AND
+ void (*func)(NOARGS))
+{
+ dict_type *new = newentry(name);
+ add_to_definition(new, func);
+ add_to_definition(new, 0);
+}
+
+void
+DEFUN(add_var,(name),
+ char *name)
+{
+ dict_type *new = newentry(name);
+ add_to_definition(new, push_number);
+ add_to_definition(new, (stinst_type)(&(new->var)));
+ add_to_definition(new,0);
+
+}
+
+
+
+
+int
+DEFUN(compile, (string),
+ char *string)
+
+{
+ int ret=0;
+ /* add words to the dictionary */
+ char *word;
+ string = nextword(string, &word);
+ while (string && *string && word[0])
+ {
+ if (strcmp(word,"var")==0)
+ {
+ string=nextword(string, &word);
+
+ add_var(word);
+ string=nextword(string, &word);
+ }
+ else
+
+ if (word[0] == ':')
+ {
+ dict_type *ptr;
+ /* Compile a word and add to dictionary */
+ string = nextword(string, &word);
+ if(Verbose) fprintf(stderr, "Found command '%s'\n", word);
+ if(strlen(word) < MIN_CMDLEN) {
+ fprintf(stderr, "ERROR: Command '%s' is too short ", word);
+ fprintf(stderr, "(MIN_CMDLEN is %d)\n", MIN_CMDLEN);
+ ret++;
+ }
+
+ ptr = newentry(word);
+ string = nextword(string, &word);
+ while (word[0] != ';' )
+ {
+ switch (word[0])
+ {
+
+
+ case '"':
+ /* got a string, embed magic push string
+ function */
+ add_to_definition(ptr, push_text);
+ add_to_definition(ptr, (stinst_type)(word+1));
+ break;
+ case '0':
+ case '1':
+ case '2':
+ case '3':
+ case '4':
+ case '5':
+ case '6':
+ case '7':
+ case '8':
+ case '9':
+ /* Got a number, embedd the magic push number
+ function */
+ add_to_definition(ptr, push_number);
+ add_to_definition(ptr, atol(word));
+ break;
+ default:
+ add_to_definition(ptr, call);
+ add_to_definition(ptr, lookup_word(word));
+ }
+
+ string = nextword(string, &word);
+ }
+ add_to_definition(ptr,0);
+ string = nextword(string, &word);
+ }
+ else
+ {
+ fprintf(stderr,"syntax error at %s\n",string-1);
+ ret++;
+ }
+ }
+
+return(ret);
+}
+
+
+static void DEFUN_VOID(bang)
+{
+*(int *)((isp[0])) = isp[-1];
+isp-=2;
+pc++;
+
+}
+
+WORD(atsign)
+{
+ isp[0] = *(int *)(isp[0]);
+ pc++;
+}
+
+WORD(hello)
+{
+
+ printf("hello\n");
+ pc++;
+}
+
+
+
+static void DEFUN(read_in, (str, file),
+ string_type *str AND
+ FILE *file)
+{
+ char buff[10000];
+ unsigned int r;
+ do
+ {
+ r = fread(buff, 1, sizeof(buff), file);
+ catbuf(str, buff, r);
+ }
+ while (r);
+ buff[0] = 0;
+
+ catbuf(str, buff,1);
+
+}
+
+
+#if 0
+static void DEFUN_VOID(usage)
+{
+ fprintf(stderr,"usage: -[i|v] -f macrofile file\n");
+ exit(33);
+}
+#endif
+
+int DEFUN(main,(ac,av),
+int ac AND
+char *av[])
+{
+ unsigned int i;
+
+
+ string_type buffer;
+ string_type pptr;
+
+
+ init_string(&buffer);
+ init_string(&pptr);
+ init_string(stack+0);
+ tos=stack+1;
+ ptr = &pptr;
+
+ add_intrinsic("push_text", push_text);
+ add_intrinsic("!", bang);
+ add_intrinsic("@", atsign);
+ add_intrinsic("hello",hello);
+ add_intrinsic("skip_past_newline", skip_past_newline );
+ add_intrinsic("catstr", icatstr );
+ add_intrinsic("copy_past_newline", icopy_past_newline );
+ add_intrinsic("dup", dup );
+ add_intrinsic("remchar", remchar );
+ add_intrinsic("get_stuff_in_command", get_stuff_in_command );
+ add_intrinsic("get_stuff_in_angle", get_stuff_in_angle );
+ add_intrinsic("do_fancy_stuff", do_fancy_stuff );
+ add_intrinsic("bulletize", bulletize );
+ add_intrinsic("courierize", courierize );
+ add_intrinsic("swap", swap );
+ add_intrinsic("outputdots", outputdots );
+ add_intrinsic("exfunstuff", exfunstuff );
+ add_intrinsic("maybecatstr", maybecatstr );
+ add_intrinsic("translatecomments", translatecomments );
+ add_intrinsic("kill_bogus_lines", kill_bogus_lines);
+ add_intrinsic("indent", indent);
+ add_intrinsic("quickref", quickref);
+ add_intrinsic("internalmode", internalmode);
+
+ /* Put a nl at the start */
+ catchar(&buffer,'\n');
+
+ read_in(&buffer, stdin);
+ remove_noncomments(&buffer, ptr);
+ for (i= 1; i < ac; i++)
+ {
+ if (av[i][0] == '-')
+ {
+ if (av[i][1] == 'f')
+ {
+ string_type b;
+ FILE *f;
+ init_string(&b);
+
+ f = fopen(av[i+1],"r");
+ if (!f)
+ {
+ fprintf(stderr,"Can't open the input file %s\n",av[i+1]);
+ return 33;
+ }
+ if(Verbose) fprintf(stderr, "Reading -f '%s'\n", av[i+1]);
+
+
+ read_in(&b, f);
+ if( compile(b.ptr) ) { fclose(f); exit(1); }
+ perform();
+ fclose(f);
+ }
+ else if (av[i][1] == 'i')
+ {
+ internal_wanted = 1;
+ }
+ else if (av[i][1] == 'v')
+ {
+ Verbose++;
+ }
+ }
+
+ }
+ write_buffer(stack+0);
+ return 0;
+}
+
+
+
makedoc.c
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: configure.in
===================================================================
--- configure.in (nonexistent)
+++ configure.in (revision 520)
@@ -0,0 +1,43 @@
+dnl This is the newlib/doc configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.59)
+AC_INIT([newlib],[NEWLIB_VERSION])
+AC_CONFIG_SRCDIR([makedoc.c])
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
+AC_CONFIG_AUX_DIR(../..)
+
+NEWLIB_CONFIGURE(..)
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test -z "$CC_FOR_BUILD"; then
+ if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+ else
+ CC_FOR_BUILD=gcc
+ fi
+fi
+AC_SUBST(CC_FOR_BUILD)
+
+# Also set EXEEXT_FOR_BUILD.
+if test "x$cross_compiling" = "xno"; then
+ EXEEXT_FOR_BUILD='$(EXEEXT)'
+else
+ AC_CACHE_CHECK([for build system executable suffix], newlib_cv_build_exeext,
+ [cat > ac_c_test.c << 'EOF'
+int main() {
+/* Nothing needed here */
+}
+EOF
+ ${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5
+ newlib_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//`
+ rm -f ac_c_test*
+ test x"${newlib_cv_build_exeext}" = x && newlib_cv_build_exeext=no])
+ EXEEXT_FOR_BUILD=""
+ test x"${newlib_cv_build_exeext}" != xno && EXEEXT_FOR_BUILD=${newlib_cv_build_exeext}
+fi
+AC_SUBST(EXEEXT_FOR_BUILD)
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT
configure.in
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: ansidecl.h
===================================================================
--- ansidecl.h (nonexistent)
+++ ansidecl.h (revision 520)
@@ -0,0 +1,116 @@
+/* ANSI and traditional C compatability macros
+ Copyright 1991 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* ANSI and traditional C compatibility macros
+
+ Some ANSI environments are "broken" in the sense that __STDC__ cannot be
+ relied upon to have it's intended meaning. Therefore we must use our own
+ concoction: _HAVE_STDC. Always use _HAVE_STDC instead of __STDC__ in newlib
+ sources!
+
+ ANSI C is assumed if _HAVE_STDC is #defined.
+
+ Macro ANSI C definition Traditional C definition
+ ----- ---- - ---------- ----------- - ----------
+ PTR `void *' `char *'
+ LONG_DOUBLE `long double' `double'
+ CONST `const' `'
+ VOLATILE `volatile' `'
+ SIGNED `signed' `'
+ PTRCONST `void *const' `char *'
+
+ DEFUN(name, arglist, args)
+
+ Defines function NAME.
+
+ ARGLIST lists the arguments, separated by commas and enclosed in
+ parentheses. ARGLIST becomes the argument list in traditional C.
+
+ ARGS list the arguments with their types. It becomes a prototype in
+ ANSI C, and the type declarations in traditional C. Arguments should
+ be separated with `AND'. For functions with a variable number of
+ arguments, the last thing listed should be `DOTS'.
+
+ DEFUN_VOID(name)
+
+ Defines a function NAME, which takes no arguments.
+
+ EXFUN(name, prototype)
+
+ Is used in an external function declaration.
+ In ANSI C it is `NAMEPROTOTYPE' (so PROTOTYPE should be enclosed in
+ parentheses). In traditional C it is `NAME()'.
+ For a function that takes no arguments, PROTOTYPE should be `(NOARGS)'.
+
+ For example:
+ extern int EXFUN(printf, (CONST char *format DOTS));
+ int DEFUN(fprintf, (stream, format),
+ FILE *stream AND CONST char *format DOTS) { ... }
+ void DEFUN_VOID(abort) { ... }
+*/
+
+#ifndef _ANSIDECL_H
+
+#define _ANSIDECL_H 1
+
+
+/* Every source file includes this file,
+ so they will all get the switch for lint. */
+/* LINTLIBRARY */
+
+
+#ifdef _HAVE_STDC
+
+#define PTR void *
+#define PTRCONST void *CONST
+#define LONG_DOUBLE long double
+
+#define AND ,
+#define NOARGS void
+#define CONST const
+#define VOLATILE volatile
+#define SIGNED signed
+#define DOTS , ...
+
+#define EXFUN(name, proto) name proto
+#define DEFUN(name, arglist, args) name(args)
+#define DEFUN_VOID(name) name(NOARGS)
+
+#else /* Not ANSI C. */
+
+#define PTR char *
+#define PTRCONST PTR
+#define LONG_DOUBLE double
+
+#define AND ;
+#define NOARGS
+#define CONST
+#define VOLATILE
+#define SIGNED
+#define DOTS
+
+#define const
+
+#define EXFUN(name, proto) name()
+#define DEFUN(name, arglist, args) name arglist args;
+#define DEFUN_VOID(name) name()
+
+#endif /* ANSI C. */
+
+
+#endif /* ansidecl.h */
ansidecl.h
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: Makefile.am
===================================================================
--- Makefile.am (nonexistent)
+++ Makefile.am (revision 520)
@@ -0,0 +1,21 @@
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+# We can't use noinst_PROGRAMS, because automake will add $(EXEEXT).
+noinst_DATA = makedoc
+
+MKDOC = makedoc$(EXEEXT_FOR_BUILD)
+
+# We don't use CFLAGS with CC_FOR_BUILD because here CFLAGS will
+# actually be CFLAGS_FOR_TARGET, and in some cases that will include
+# -Os, which CC_FOR_BUILD may not recognize.
+
+$(MKDOC): makedoc.o
+ $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS) -o $(MKDOC) makedoc.o
+
+makedoc.o: makedoc.c
+ $(CC_FOR_BUILD) -g $(CFLAGS_FOR_BUILD) -c $(srcdir)/makedoc.c
+
+ACLOCAL_AMFLAGS = -I .. -I ../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
Makefile.am
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: doc.str
===================================================================
--- doc.str (nonexistent)
+++ doc.str (revision 520)
@@ -0,0 +1,169 @@
+: nokill_bogus_lines ;
+
+: ENDDD
+ skip_past_newline
+ ;
+
+: TABLE
+ skip_past_newline
+ "@table @code\n" catstr
+ ;
+
+: ENDTABLE
+ skip_past_newline
+ "@end table\n"
+ catstr
+ ;
+
+: QUICKREF
+ skip_past_newline
+ get_stuff_in_command
+ "&&~&&~&&\cr\tablerule\n"
+ quickref
+ ;
+
+: EXAMPLE
+ skip_past_newline
+
+ get_stuff_in_command nokill_bogus_lines translatecomments
+ courierize catstr
+
+ ;
+
+: INODE
+ "@node " catstr skip_past_newline copy_past_newline catstr
+ ;
+
+: CODE_FRAGMENT
+ EXAMPLE
+ ;
+
+: SYNOPSIS
+ skip_past_newline
+ "@strong{Synopsis}\n" catstr
+ "@example\n" catstr
+ get_stuff_in_command
+ do_fancy_stuff
+ nokill_bogus_lines
+ indent
+ catstr
+ "@end example\n" catstr
+
+ ;
+
+: ANSI_SYNOPSIS
+ skip_past_newline
+ "@strong{Synopsis}\n" catstr
+ "@example\n" catstr
+ get_stuff_in_command
+ do_fancy_stuff
+ nokill_bogus_lines
+ indent
+ catstr
+ "@end example\n" catstr
+
+ ;
+
+: OLDTRAD_SYNOPSIS
+ skip_past_newline
+ "@strong{Traditional Synopsis}\n" catstr
+ "@example\n" catstr
+ get_stuff_in_command
+ do_fancy_stuff
+ nokill_bogus_lines
+ indent
+ catstr
+ "@end example\n" catstr
+
+ ;
+
+: TRAD_SYNOPSIS
+ skip_past_newline
+
+ ;
+
+: INDEX
+ "@findex " skip_past_newline copy_past_newline catstr catstr
+ ;
+
+: FUNCTION
+ "@node " - a
+ skip_past_newline
+ copy_past_newline
+ dup - a x x
+ get_stuff_in_angle -a x y
+ swap
+ do_fancy_stuff
+ "@section " - a x x b
+ swap
+ remchar
+ "\n" - a x b x c
+ catstr catstr catstr catstr catstr
+ ;
+
+: bodytext
+ get_stuff_in_command
+ bulletize
+ courierize
+ do_fancy_stuff
+ catstr
+ "@*\n" catstr
+ ;
+
+: asection
+ skip_past_newline
+ catstr
+ copy_past_newline
+ do_fancy_stuff catstr
+ bodytext
+ ;
+
+: SECTION
+ "@section " asection ;
+
+: SUBSECTION
+ "@section " asection ;
+
+: SUBSUBSECTION
+ "@subsection " asection ;
+
+: subhead
+ skip_past_newline
+ bodytext
+ ;
+
+: DESCRIPTION
+ "@strong{Description}@*\n" catstr subhead ;
+
+: RETURNS
+ "@strong{Returns}@*\n" catstr subhead ;
+
+: ERRORS
+ "@strong{Errors}@*\n" catstr subhead ;
+
+: PORTABILITY
+ "@strong{Portability}@*\n" catstr subhead ;
+
+: BUGS
+ "@strong{Bugs}@*\n" catstr subhead ;
+
+: WARNINGS
+ "@strong{Warnings}@*\n" catstr subhead ;
+
+: SEEALSO
+ "@strong{See Also}@*\n" catstr subhead ;
+
+: INTERNAL_FUNCTION
+ func ;
+
+: INTERNAL_DEFINITION
+ func ;
+
+: INTERNAL
+ func ;
+
+: TYPEDEF
+ FUNCTION ;
+
+: NEWPAGE
+ "@page\n" catstr subhead ;
Index: aclocal.m4
===================================================================
--- aclocal.m4 (nonexistent)
+++ aclocal.m4 (revision 520)
@@ -0,0 +1,992 @@
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],,
+[m4_warning([this file was generated for autoconf 2.63.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.11'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.11], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.11])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 10
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 5
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ case $CONFIG_FILES in
+ *\'*) eval set x "$CONFIG_FILES" ;;
+ *) set x $CONFIG_FILES ;;
+ esac
+ shift
+ for mf
+ do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+ done
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 16
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.62])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+])
+
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless `enable' is passed literally.
+# For symmetry, `disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to am_maintainer_other maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+[ --][am_maintainer_other][-maintainer-mode am_maintainer_other make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2009 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo this is the am__doit target
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+ am__include=include
+ am__quote=
+ _am_result=GNU
+ ;;
+esac
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ case `$am_make -s -f confmf 2> /dev/null` in #(
+ *the\ am__doit\ target*)
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ ;;
+ esac
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([../acinclude.m4])