Subversion Repositories openrisc

/stab.def File deleted

/ChangeLog File deleted

ChangeLog Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: ar.h =================================================================== --- ar.h (revision 816) +++ ar.h (nonexistent) @@ -1,54 +0,0 @@ -/* archive file definition for GNU software - - Copyright 2001, 2008 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* So far this is correct for BSDish archives. Don't forget that - files must begin on an even byte boundary. */ - -#ifndef __GNU_AR_H__ -#define __GNU_AR_H__ - -/* Note that the usual '\n' in magic strings may translate to different - characters, as allowed by ANSI. '\012' has a fixed value, and remains - compatible with existing BSDish archives. */ - -#define ARMAG "!\012" /* For COFF and a.out archives. */ -#define ARMAGB "!\012" /* For b.out archives. */ -#define ARMAGT "!\012" /* For thin archives. */ -#define SARMAG 8 -#define ARFMAG "`\012" - -/* The ar_date field of the armap (__.SYMDEF) member of an archive - must be greater than the modified date of the entire file, or - BSD-derived linkers complain. We originally write the ar_date with - this offset from the real file's mod-time. After finishing the - file, we rewrite ar_date if it's not still greater than the mod date. */ - -#define ARMAP_TIME_OFFSET 60 - -struct ar_hdr -{ - char ar_name[16]; /* Name of this member. */ - char ar_date[12]; /* File mtime. */ - char ar_uid[6]; /* Owner uid; printed as decimal. */ - char ar_gid[6]; /* Owner gid; printed as decimal. */ - char ar_mode[8]; /* File mode, printed as octal. */ - char ar_size[10]; /* File size, printed as decimal. */ - char ar_fmag[2]; /* Should contain ARFMAG. */ -}; - -#endif /* __GNU_AR_H__ */

ar.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: sun4.h =================================================================== --- sun4.h (revision 816) +++ sun4.h (nonexistent) @@ -1,235 +0,0 @@ -/* SPARC-specific values for a.out files - - Copyright 2001 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* Some systems, e.g., AIX, may have defined this in header files already - included. */ -#undef TARGET_PAGE_SIZE -#define TARGET_PAGE_SIZE 0x2000 /* 8K. aka NBPG in */ -/* Note that some SPARCs have 4K pages, some 8K, some others. */ - -#define SEG_SIZE_SPARC TARGET_PAGE_SIZE -#define SEG_SIZE_SUN3 0x20000 /* Resolution of r/w protection hw */ - -#define TEXT_START_ADDR TARGET_PAGE_SIZE /* Location 0 is not accessible */ -#define N_HEADER_IN_TEXT(x) 1 - -/* Non-default definitions of the accessor macros... */ - -/* Segment size varies on Sun-3 versus Sun-4. */ - -#define N_SEGSIZE(x) (N_MACHTYPE(x) == M_SPARC? SEG_SIZE_SPARC: \ - N_MACHTYPE(x) == M_68020? SEG_SIZE_SUN3: \ - /* Guess? */ TARGET_PAGE_SIZE) - -/* Virtual Address of text segment from the a.out file. For OMAGIC, - (almost always "unlinked .o's" these days), should be zero. - Sun added a kludge so that shared libraries linked ZMAGIC get - an address of zero if a_entry (!!!) is lower than the otherwise - expected text address. These kludges have gotta go! - For linked files, should reflect reality if we know it. */ - -/* This differs from the version in aout64.h (which we override by defining - it here) only for NMAGIC (we return TEXT_START_ADDR+EXEC_BYTES_SIZE; - they return 0). */ - -#define N_TXTADDR(x) \ - (N_MAGIC(x)==OMAGIC? 0 \ - : (N_MAGIC(x) == ZMAGIC && (x).a_entry < TEXT_START_ADDR)? 0 \ - : TEXT_START_ADDR+EXEC_BYTES_SIZE) - -/* When a file is linked against a shared library on SunOS 4, the - dynamic bit in the exec header is set, and the first symbol in the - symbol table is __DYNAMIC. Its value is the address of the - following structure. */ - -struct external_sun4_dynamic -{ - /* The version number of the structure. SunOS 4.1.x creates files - with version number 3, which is what this structure is based on. - According to gdb, version 2 is similar. I believe that version 2 - used a different type of procedure linkage table, and there may - have been other differences. */ - bfd_byte ld_version[4]; - /* The virtual address of a 28 byte structure used in debugging. - The contents are filled in at run time by ld.so. */ - bfd_byte ldd[4]; - /* The virtual address of another structure with information about - how to relocate the executable at run time. */ - bfd_byte ld[4]; -}; - -/* The size of the debugging structure pointed to by the debugger - field of __DYNAMIC. */ -#define EXTERNAL_SUN4_DYNAMIC_DEBUGGER_SIZE (24) - -/* The structure pointed to by the linker field of __DYNAMIC. As far - as I can tell, most of the addresses in this structure are offsets - within the file, but some are actually virtual addresses. */ - -struct internal_sun4_dynamic_link -{ - /* Linked list of loaded objects. This is filled in at runtime by - ld.so and probably by dlopen. */ - unsigned long ld_loaded; - - /* The address of the list of names of shared objects which must be - included at runtime. Each entry in the list is 16 bytes: the 4 - byte address of the string naming the object (e.g., for -lc this - is "c"); 4 bytes of flags--the high bit is whether to search for - the object using the library path; the 2 byte major version - number; the 2 byte minor version number; the 4 byte address of - the next entry in the list (zero if this is the last entry). The - version numbers seem to only be non-zero when doing library - searching. */ - unsigned long ld_need; - - /* The address of the path to search for the shared objects which - must be included. This points to a string in PATH format which - is generated from the -L arguments to the linker. According to - the man page, ld.so implicitly adds ${LD_LIBRARY_PATH} to the - beginning of this string and /lib:/usr/lib:/usr/local/lib to the - end. The string is terminated by a null byte. This field is - zero if there is no additional path. */ - unsigned long ld_rules; - - /* The address of the global offset table. This appears to be a - virtual address, not a file offset. The first entry in the - global offset table seems to be the virtual address of the - sun4_dynamic structure (the same value as the __DYNAMIC symbol). - The global offset table is used for PIC code to hold the - addresses of variables. A dynamically linked file which does not - itself contain PIC code has a four byte global offset table. */ - unsigned long ld_got; - - /* The address of the procedure linkage table. This appears to be a - virtual address, not a file offset. - - On a SPARC, the table is composed of 12 byte entries, each of - which consists of three instructions. The first entry is - sethi %hi(0),%g1 - jmp %g1 - nop - These instructions are changed by ld.so into a jump directly into - ld.so itself. Each subsequent entry is - save %sp, -96, %sp - call

- - The reloc_number is the number of the reloc to use to resolve - this entry. The reloc will be a JMP_SLOT reloc against some - symbol that is not defined in this object file but should be - defined in a shared object (if it is not, ld.so will report a - runtime error and exit). The constant 0x010000000 turns the - reloc number into a sethi of %g0, which does nothing since %g0 is - hardwired to zero. - - When one of these entries is executed, it winds up calling into - ld.so. ld.so looks at the reloc number, available via the return - address, to determine which entry this is. It then looks at the - reloc and patches up the entry in the table into a sethi and jmp - to the real address followed by a nop. This means that the reloc - lookup only has to happen once, and it also means that the - relocation only needs to be done if the function is actually - called. The relocation is expensive because ld.so must look up - the symbol by name. - - The size of the procedure linkage table is given by the ld_plt_sz - field. */ - unsigned long ld_plt; - - /* The address of the relocs. These are in the same format as - ordinary relocs. Symbol index numbers refer to the symbols - pointed to by ld_stab. I think the only way to determine the - number of relocs is to assume that all the bytes from ld_rel to - ld_hash contain reloc entries. */ - unsigned long ld_rel; - - /* The address of a hash table of symbols. The hash table has - roughly the same number of entries as there are dynamic symbols; - I think the only way to get the exact size is to assume that - every byte from ld_hash to ld_stab is devoted to the hash table. - - Each entry in the hash table is eight bytes. The first four - bytes are a symbol index into the dynamic symbols. The second - four bytes are the index of the next hash table entry in the - bucket. The ld_buckets field gives the number of buckets, say B. - The first B entries in the hash table each start a bucket which - is chained through the second four bytes of each entry. A value - of zero ends the chain. - - The hash function is simply - h = 0; - while (*string != '\0') - h = (h << 1) + *string++; - h &= 0x7fffffff; - - To look up a symbol, compute the hash value of the name. Take - the modulos of hash value and the number of buckets. Start at - that entry in the hash table. See if the symbol (from the first - four bytes of the hash table entry) has the name you are looking - for. If not, use the chain field (the second four bytes of the - hash table entry) to move on to the next entry in this bucket. - If the chain field is zero you have reached the end of the - bucket, and the symbol is not in the hash table. */ - unsigned long ld_hash; - - /* The address of the symbol table. This is a list of - external_nlist structures. The string indices are relative to - the ld_symbols field. I think the only way to determine the - number of symbols is to assume that all the bytes between ld_stab - and ld_symbols are external_nlist structures. */ - unsigned long ld_stab; - - /* I don't know what this is for. It seems to always be zero. */ - unsigned long ld_stab_hash; - - /* The number of buckets in the hash table. */ - unsigned long ld_buckets; - - /* The address of the symbol string table. The first string in this - string table need not be the empty string. */ - unsigned long ld_symbols; - - /* The size in bytes of the symbol string table. */ - unsigned long ld_symb_size; - - /* The size in bytes of the text segment. */ - unsigned long ld_text; - - /* The size in bytes of the procedure linkage table. */ - unsigned long ld_plt_sz; -}; - -/* The external form of the structure. */ - -struct external_sun4_dynamic_link -{ - bfd_byte ld_loaded[4]; - bfd_byte ld_need[4]; - bfd_byte ld_rules[4]; - bfd_byte ld_got[4]; - bfd_byte ld_plt[4]; - bfd_byte ld_rel[4]; - bfd_byte ld_hash[4]; - bfd_byte ld_stab[4]; - bfd_byte ld_stab_hash[4]; - bfd_byte ld_buckets[4]; - bfd_byte ld_symbols[4]; - bfd_byte ld_symb_size[4]; - bfd_byte ld_text[4]; - bfd_byte ld_plt_sz[4]; -};

sun4.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: adobe.h =================================================================== --- adobe.h (revision 816) +++ adobe.h (nonexistent) @@ -1,313 +0,0 @@ -/* `a.out.adobe' differences from standard a.out files - - Copyright 2001 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -#ifndef __A_OUT_ADOBE_H__ -#define __A_OUT_ADOBE_H__ - -#define BYTES_IN_WORD 4 - -/* Struct external_exec is the same. */ - -/* This is the layout on disk of the 32-bit or 64-bit exec header. */ - -struct external_exec -{ - bfd_byte e_info[4]; /* magic number and stuff */ - bfd_byte e_text[BYTES_IN_WORD]; /* length of text section in bytes */ - bfd_byte e_data[BYTES_IN_WORD]; /* length of data section in bytes */ - bfd_byte e_bss[BYTES_IN_WORD]; /* length of bss area in bytes */ - bfd_byte e_syms[BYTES_IN_WORD]; /* length of symbol table in bytes */ - bfd_byte e_entry[BYTES_IN_WORD]; /* start address */ - bfd_byte e_trsize[BYTES_IN_WORD]; /* length of text relocation info */ - bfd_byte e_drsize[BYTES_IN_WORD]; /* length of data relocation info */ -}; - -#define EXEC_BYTES_SIZE (4 + BYTES_IN_WORD * 7) - -/* Magic numbers for a.out files */ - -#undef ZMAGIC -#define ZMAGIC 0xAD0BE /* Cute, eh? */ -#undef OMAGIC -#undef NMAGIC - -#define N_BADMAG(x) ((x).a_info != ZMAGIC) - -/* By default, segment size is constant. But some machines override this - to be a function of the a.out header (e.g. machine type). */ -#ifndef N_SEGSIZE -#define N_SEGSIZE(x) SEGMENT_SIZE -#endif -#undef N_SEGSIZE /* FIXMEXXXX */ - -/* Segment information for the a.out.Adobe format is specified after the - file header. It contains N segment descriptors, followed by one with - a type of zero. - - The actual text of the segments starts at N_TXTOFF in the file, - regardless of how many or how few segment headers there are. */ - -struct external_segdesc { - unsigned char e_type[1]; - unsigned char e_size[3]; - unsigned char e_virtbase[4]; - unsigned char e_filebase[4]; -}; - -struct internal_segdesc { - unsigned int a_type:8; /* Segment type N_TEXT, N_DATA, 0 */ - unsigned int a_size:24; /* Segment size */ - bfd_vma a_virtbase; /* Virtual address */ - unsigned int a_filebase; /* Base address in object file */ -}; - -#define N_TXTADDR(x) \ - -/* This is documented to be at 1024, but appears to really be at 2048. - FIXME?! */ -#define N_TXTOFF(x) 2048 - -#define N_TXTSIZE(x) ((x).a_text) - -#define N_DATADDR(x) - -#define N_BSSADDR(x) - -/* Offsets of the various portions of the file after the text segment. */ - -#define N_DATOFF(x) ( N_TXTOFF(x) + N_TXTSIZE(x) ) -#define N_TRELOFF(x) ( N_DATOFF(x) + (x).a_data ) -#define N_DRELOFF(x) ( N_TRELOFF(x) + (x).a_trsize ) -#define N_SYMOFF(x) ( N_DRELOFF(x) + (x).a_drsize ) -#define N_STROFF(x) ( N_SYMOFF(x) + (x).a_syms ) - -/* Symbols */ -struct external_nlist { - bfd_byte e_strx[BYTES_IN_WORD]; /* index into string table of name */ - bfd_byte e_type[1]; /* type of symbol */ - bfd_byte e_other[1]; /* misc info (usually empty) */ - bfd_byte e_desc[2]; /* description field */ - bfd_byte e_value[BYTES_IN_WORD]; /* value of symbol */ -}; - -#define EXTERNAL_NLIST_SIZE (BYTES_IN_WORD+4+BYTES_IN_WORD) - -struct internal_nlist { - unsigned long n_strx; /* index into string table of name */ - unsigned char n_type; /* type of symbol */ - unsigned char n_other; /* misc info (usually empty) */ - unsigned short n_desc; /* description field */ - bfd_vma n_value; /* value of symbol */ -}; - -/* The n_type field is the symbol type, containing: */ - -#define N_UNDF 0 /* Undefined symbol */ -#define N_ABS 2 /* Absolute symbol -- defined at particular addr */ -#define N_TEXT 4 /* Text sym -- defined at offset in text seg */ -#define N_DATA 6 /* Data sym -- defined at offset in data seg */ -#define N_BSS 8 /* BSS sym -- defined at offset in zero'd seg */ -#define N_COMM 0x12 /* Common symbol (visible after shared lib dynlink) */ -#define N_FN 0x1f /* File name of .o file */ -#define N_FN_SEQ 0x0C /* N_FN from Sequent compilers (sigh) */ -/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT, - N_DATA, or N_BSS. When the low-order bit of other types is set, - (e.g. N_WARNING versus N_FN), they are two different types. */ -#define N_EXT 1 /* External symbol (as opposed to local-to-this-file) */ -#define N_TYPE 0x1e -#define N_STAB 0xe0 /* If any of these bits are on, it's a debug symbol */ - -#define N_INDR 0x0a - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - elements value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - -/* Warning symbol. The text gives a warning message, the next symbol - in the table will be undefined. When the symbol is referenced, the - message is printed. */ - -#define N_WARNING 0x1e - -/* Relocations - - There are two types of relocation flavours for a.out systems, - standard and extended. The standard form is used on systems where the - instruction has room for all the bits of an offset to the operand, whilst - the extended form is used when an address operand has to be split over n - instructions. Eg, on the 68k, each move instruction can reference - the target with a displacement of 16 or 32 bits. On the sparc, move - instructions use an offset of 14 bits, so the offset is stored in - the reloc field, and the data in the section is ignored. -*/ - -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct reloc_std_external { - bfd_byte r_address[BYTES_IN_WORD]; /* offset of of data to relocate */ - bfd_byte r_index[3]; /* symbol table index of symbol */ - bfd_byte r_type[1]; /* relocation type */ -}; - -#define RELOC_STD_BITS_PCREL_BIG 0x80 -#define RELOC_STD_BITS_PCREL_LITTLE 0x01 - -#define RELOC_STD_BITS_LENGTH_BIG 0x60 -#define RELOC_STD_BITS_LENGTH_SH_BIG 5 /* To shift to units place */ -#define RELOC_STD_BITS_LENGTH_LITTLE 0x06 -#define RELOC_STD_BITS_LENGTH_SH_LITTLE 1 - -#define RELOC_STD_BITS_EXTERN_BIG 0x10 -#define RELOC_STD_BITS_EXTERN_LITTLE 0x08 - -#define RELOC_STD_BITS_BASEREL_BIG 0x08 -#define RELOC_STD_BITS_BASEREL_LITTLE 0x08 - -#define RELOC_STD_BITS_JMPTABLE_BIG 0x04 -#define RELOC_STD_BITS_JMPTABLE_LITTLE 0x04 - -#define RELOC_STD_BITS_RELATIVE_BIG 0x02 -#define RELOC_STD_BITS_RELATIVE_LITTLE 0x02 - -#define RELOC_STD_SIZE (BYTES_IN_WORD + 3 + 1) /* Bytes per relocation entry */ - -struct reloc_std_internal -{ - bfd_vma r_address; /* Address (within segment) to be relocated. */ - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in files the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* The next three bits are for SunOS shared libraries, and seem to - be undocumented. */ - unsigned int r_baserel:1; /* Linkage table relative */ - unsigned int r_jmptable:1; /* pc-relative to jump table */ - unsigned int r_relative:1; /* "relative relocation" */ - /* unused */ - unsigned int r_pad:1; /* Padding -- set to zero */ -}; - - -/* EXTENDED RELOCS */ - -struct reloc_ext_external { - bfd_byte r_address[BYTES_IN_WORD]; /* offset of of data to relocate */ - bfd_byte r_index[3]; /* symbol table index of symbol */ - bfd_byte r_type[1]; /* relocation type */ - bfd_byte r_addend[BYTES_IN_WORD]; /* datum addend */ -}; - -#define RELOC_EXT_BITS_EXTERN_BIG 0x80 -#define RELOC_EXT_BITS_EXTERN_LITTLE 0x01 - -#define RELOC_EXT_BITS_TYPE_BIG 0x1F -#define RELOC_EXT_BITS_TYPE_SH_BIG 0 -#define RELOC_EXT_BITS_TYPE_LITTLE 0xF8 -#define RELOC_EXT_BITS_TYPE_SH_LITTLE 3 - -/* Bytes per relocation entry */ -#define RELOC_EXT_SIZE (BYTES_IN_WORD + 3 + 1 + BYTES_IN_WORD) - -enum reloc_type -{ - /* simple relocations */ - RELOC_8, /* data[0:7] = addend + sv */ - RELOC_16, /* data[0:15] = addend + sv */ - RELOC_32, /* data[0:31] = addend + sv */ - /* pc-rel displacement */ - RELOC_DISP8, /* data[0:7] = addend - pc + sv */ - RELOC_DISP16, /* data[0:15] = addend - pc + sv */ - RELOC_DISP32, /* data[0:31] = addend - pc + sv */ - /* Special */ - RELOC_WDISP30, /* data[0:29] = (addend + sv - pc)>>2 */ - RELOC_WDISP22, /* data[0:21] = (addend + sv - pc)>>2 */ - RELOC_HI22, /* data[0:21] = (addend + sv)>>10 */ - RELOC_22, /* data[0:21] = (addend + sv) */ - RELOC_13, /* data[0:12] = (addend + sv) */ - RELOC_LO10, /* data[0:9] = (addend + sv) */ - RELOC_SFA_BASE, - RELOC_SFA_OFF13, - /* P.I.C. (base-relative) */ - RELOC_BASE10, /* Not sure - maybe we can do this the */ - RELOC_BASE13, /* right way now */ - RELOC_BASE22, - /* for some sort of pc-rel P.I.C. (?) */ - RELOC_PC10, - RELOC_PC22, - /* P.I.C. jump table */ - RELOC_JMP_TBL, - /* reputedly for shared libraries somehow */ - RELOC_SEGOFF16, - RELOC_GLOB_DAT, - RELOC_JMP_SLOT, - RELOC_RELATIVE, - - RELOC_11, - RELOC_WDISP2_14, - RELOC_WDISP19, - RELOC_HHI22, /* data[0:21] = (addend + sv) >> 42 */ - RELOC_HLO10, /* data[0:9] = (addend + sv) >> 32 */ - - /* 29K relocation types */ - RELOC_JUMPTARG, - RELOC_CONST, - RELOC_CONSTH, - - NO_RELOC - }; - - -struct reloc_internal { - bfd_vma r_address; /* offset of of data to relocate */ - long r_index; /* symbol table index of symbol */ - enum reloc_type r_type; /* relocation type */ - bfd_vma r_addend; /* datum addend */ -}; - -#endif /* __A_OUT_ADOBE_H__ */

adobe.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: host.h =================================================================== --- host.h (revision 816) +++ host.h (nonexistent) @@ -1,42 +0,0 @@ -/* host.h - Parameters about the a.out format, based on the host system - on which the program is compiled. - - Copyright 2001 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* Address of data segment in memory after it is loaded. - It is up to you to define SEGMENT_SIZE on machines not listed here. */ -#ifndef SEGMENT_SIZE - -#if defined(hp300) || defined(pyr) -#define SEGMENT_SIZE page_size -#endif - -#ifdef sony -#define SEGMENT_SIZE 0x1000 -#endif /* Sony. */ - -#ifdef is68k -#define SEGMENT_SIZE 0x20000 -#endif - -#if defined(m68k) && defined(PORTAR) -#define TARGET_PAGE_SIZE 0x400 -#define SEGMENT_SIZE TARGET_PAGE_SIZE -#endif - -#endif /*!defined(SEGMENT_SIZE)*/ -

host.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: dynix3.h =================================================================== --- dynix3.h (revision 816) +++ dynix3.h (nonexistent) @@ -1,86 +0,0 @@ -/* a.out specifics for Sequent Symmetry running Dynix 3.x - - Copyright 2001 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -#ifndef A_OUT_DYNIX3_H -#define A_OUT_DYNIX3_H - -#define external_exec dynix_external_exec - -/* struct exec for Dynix 3 - - a_gdtbl and a_bootstrap are only for standalone binaries. - Shared data fields are not supported by the kernel as of Dynix 3.1, - but are supported by Dynix compiler programs. */ -struct dynix_external_exec - { - unsigned char e_info[4]; - unsigned char e_text[4]; - unsigned char e_data[4]; - unsigned char e_bss[4]; - unsigned char e_syms[4]; - unsigned char e_entry[4]; - unsigned char e_trsize[4]; - unsigned char e_drsize[4]; - unsigned char e_g_code[8]; - unsigned char e_g_data[8]; - unsigned char e_g_desc[8]; - unsigned char e_shdata[4]; - unsigned char e_shbss[4]; - unsigned char e_shdrsize[4]; - unsigned char e_bootstrap[44]; - unsigned char e_reserved[12]; - unsigned char e_version[4]; - }; - -#define EXEC_BYTES_SIZE (128) - -/* All executables under Dynix are demand paged with read-only text, - Thus no NMAGIC. - - ZMAGIC has a page of 0s at virtual 0, - XMAGIC has an invalid page at virtual 0. */ -#define OMAGIC 0x12eb /* .o */ -#define ZMAGIC 0x22eb /* zero @ 0, demand load */ -#define XMAGIC 0x32eb /* invalid @ 0, demand load */ -#define SMAGIC 0x42eb /* standalone, not supported here */ - -#define N_BADMAG(x) ((OMAGIC != N_MAGIC(x)) && \ - (ZMAGIC != N_MAGIC(x)) && \ - (XMAGIC != N_MAGIC(x)) && \ - (SMAGIC != N_MAGIC(x))) - -#define N_ADDRADJ(x) ((ZMAGIC == N_MAGIC(x) || XMAGIC == N_MAGIC(x)) ? 0x1000 : 0) - -#define N_TXTOFF(x) (EXEC_BYTES_SIZE) -#define N_DATOFF(x) (N_TXTOFF(x) + N_TXTSIZE(x)) -#define N_SHDATOFF(x) (N_DATOFF(x) + (x).a_data) -#define N_TRELOFF(x) (N_SHDATOFF(x) + (x).a_shdata) -#define N_DRELOFF(x) (N_TRELOFF(x) + (x).a_trsize) -#define N_SHDRELOFF(x) (N_DRELOFF(x) + (x).a_drsize) -#define N_SYMOFF(x) (N_SHDRELOFF(x) + (x).a_shdrsize) -#define N_STROFF(x) (N_SYMOFF(x) + (x).a_syms) - -#define N_TXTADDR(x) \ - (((OMAGIC == N_MAGIC(x)) || (SMAGIC == N_MAGIC(x))) ? 0 \ - : TEXT_START_ADDR + EXEC_BYTES_SIZE) - -#define N_TXTSIZE(x) \ - (((OMAGIC == N_MAGIC(x)) || (SMAGIC == N_MAGIC(x))) ? ((x).a_text) \ - : ((x).a_text - N_ADDRADJ(x) - EXEC_BYTES_SIZE)) - -#endif /* A_OUT_DYNIX3_H */

dynix3.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: hp300hpux.h =================================================================== --- hp300hpux.h (revision 816) +++ hp300hpux.h (nonexistent) @@ -1,119 +0,0 @@ -/* Special version of for use under hp-ux. - Copyright 1988, 1993, 1995, 2001 Free Software Foundation, Inc. */ - -struct hp300hpux_exec_bytes -{ - unsigned char e_info[4]; /* a_machtype/a_magic */ - unsigned char e_spare1[4]; - unsigned char e_spare2[4]; - unsigned char e_text[4]; /* length of text, in bytes */ - unsigned char e_data[4]; /* length of data, in bytes */ - unsigned char e_bss[4]; /* length of uninitialized data area , in bytes */ - unsigned char e_trsize[4]; /* length of relocation info for text, in bytes*/ - unsigned char e_drsize[4]; /* length of relocation info for data, in bytes*/ - unsigned char e_passize[4];/* HP = pascal interface size */ - unsigned char e_syms[4]; /* HP = symbol table size */ - unsigned char e_spare5[4]; /* HP = debug name table size */ - unsigned char e_entry[4]; /* start address */ - unsigned char e_spare6[4]; /* HP = source line table size */ - unsigned char e_supsize[4];/* HP = value table size */ - unsigned char e_drelocs[4]; - unsigned char e_extension[4]; /* file offset of extension */ -}; -#define EXEC_BYTES_SIZE 64 - -struct hp300hpux_nlist_bytes - { - unsigned char e_value[4]; - unsigned char e_type[1]; - unsigned char e_length[1]; /* length of ascii symbol name */ - unsigned char e_almod[2]; /* alignment mod */ - unsigned char e_shlib[2]; /* info about dynamic linking */ - }; -#define EXTERNAL_NLIST_SIZE 10 - -struct hp300hpux_reloc - { - unsigned char r_address[4];/* offset of of data to relocate */ - unsigned char r_index[2]; /* symbol table index of symbol */ - unsigned char r_type[1]; /* relocation type */ - unsigned char r_length[1]; /* length of item to reloc */ - }; - -struct hp300hpux_header_extension -{ - unsigned char e_syms[4]; - unsigned char unique_headers[12*4]; - unsigned char e_header[2]; /* type of header */ - unsigned char e_version[2]; /* version */ - unsigned char e_size[4]; /* bytes following*/ - unsigned char e_extension[4];/* file offset of next extension */ -}; -#define EXTERNAL_EXTENSION_HEADER_SIZE (16*4) - -/* hpux separates object files (0x106) and impure executables (0x107) */ -/* but the bfd code does not distinguish between them. Since we want to*/ -/* read hpux .o files, we add an special define and use it below in */ -/* offset and address calculations. */ - -#define HPUX_DOT_O_MAGIC 0x106 -#define OMAGIC 0x107 /* object file or impure executable. */ -#define NMAGIC 0x108 /* Code indicating pure executable. */ -#define ZMAGIC 0x10B /* demand-paged executable. */ - -#define N_HEADER_IN_TEXT(x) 0 - -#if 0 /* libaout.h only uses the lower 8 bits */ -#define HP98x6_ID 0x20A -#define HP9000S200_ID 0x20C -#endif -#define HP98x6_ID 0x0A -#define HP9000S200_ID 0x0C - -#define N_BADMAG(x) ((_N_BADMAG (x)) || (_N_BADMACH (x))) - -#define N_DATADDR(x) \ - ((N_MAGIC (x) == OMAGIC || N_MAGIC (x) == HPUX_DOT_O_MAGIC) \ - ? (N_TXTADDR (x) + N_TXTSIZE (x)) \ - : (N_SEGSIZE (x) + ((N_TXTADDR (x) + N_TXTSIZE (x) - 1) \ - & ~ (bfd_vma) (N_SEGSIZE (x) - 1)))) - -#define _N_BADMACH(x) \ - (((N_MACHTYPE (x)) != HP9000S200_ID) && ((N_MACHTYPE (x)) != HP98x6_ID)) - -#define _N_BADMAG(x) (N_MAGIC(x) != HPUX_DOT_O_MAGIC \ - && N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC ) - -#undef _N_HDROFF -#define _N_HDROFF(x) (SEGMENT_SIZE - (sizeof (struct exec))) - -#undef N_DATOFF -#undef N_PASOFF -#undef N_SYMOFF -#undef N_SUPOFF -#undef N_TRELOFF -#undef N_DRELOFF -#undef N_STROFF - -#define N_DATOFF(x) ( N_TXTOFF(x) + N_TXTSIZE(x) ) -#define N_PASOFF(x) ( N_DATOFF(x) + (x).a_data) -#define N_SYMOFF(x) ( N_PASOFF(x) /* + (x).a_passize*/ ) -#define N_SUPOFF(x) ( N_SYMOFF(x) + (x).a_syms ) -#define N_TRELOFF(x) ( N_SUPOFF(x) /* + 0 (x).a_supsize*/ ) -#define N_DRELOFF(x) ( N_TRELOFF(x) + (x).a_trsize ) -#define N_EXTHOFF(x) ( N_DRELOFF(x) /* + 0 (x).a_drsize */) -#define N_STROFF(x) ( 0 /* no string table */ ) - -/* use these when the file has gnu symbol tables */ -#define N_GNU_TRELOFF(x) (N_DATOFF(x) + (x).a_data) -#define N_GNU_DRELOFF(x) (N_GNU_TRELOFF(x) + (x).a_trsize) -#define N_GNU_SYMOFF(x) (N_GNU_DRELOFF(x) + (x).a_drsize) - -#define TARGET_PAGE_SIZE 0x1000 -#define SEGMENT_SIZE 0x1000 -#define TEXT_START_ADDR 0 - -#undef N_SHARED_LIB -#define N_SHARED_LIB(x) ( 0 /* no shared libraries */ )

hp300hpux.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: aout64.h =================================================================== --- aout64.h (revision 816) +++ aout64.h (nonexistent) @@ -1,519 +0,0 @@ -/* `a.out' object-file definitions, including extensions to 64-bit fields - - Copyright 1999, 2000, 2001, 2003 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -#ifndef __A_OUT_64_H__ -#define __A_OUT_64_H__ - -#ifndef BYTES_IN_WORD -#define BYTES_IN_WORD 4 -#endif - -/* This is the layout on disk of the 32-bit or 64-bit exec header. */ - -#ifndef external_exec -struct external_exec -{ - bfd_byte e_info[4]; /* Magic number and stuff. */ - bfd_byte e_text[BYTES_IN_WORD]; /* Length of text section in bytes. */ - bfd_byte e_data[BYTES_IN_WORD]; /* Length of data section in bytes. */ - bfd_byte e_bss[BYTES_IN_WORD]; /* Length of bss area in bytes. */ - bfd_byte e_syms[BYTES_IN_WORD]; /* Length of symbol table in bytes. */ - bfd_byte e_entry[BYTES_IN_WORD]; /* Start address. */ - bfd_byte e_trsize[BYTES_IN_WORD]; /* Length of text relocation info. */ - bfd_byte e_drsize[BYTES_IN_WORD]; /* Length of data relocation info. */ -}; - -#define EXEC_BYTES_SIZE (4 + BYTES_IN_WORD * 7) - -/* Magic numbers for a.out files. */ - -#if ARCH_SIZE==64 -#define OMAGIC 0x1001 /* Code indicating object file. */ -#define ZMAGIC 0x1002 /* Code indicating demand-paged executable. */ -#define NMAGIC 0x1003 /* Code indicating pure executable. */ - -/* There is no 64-bit QMAGIC as far as I know. */ - -#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC) -#else -#define OMAGIC 0407 /* Object file or impure executable. */ -#define NMAGIC 0410 /* Code indicating pure executable. */ -#define ZMAGIC 0413 /* Code indicating demand-paged executable. */ -#define BMAGIC 0415 /* Used by a b.out object. */ - -/* This indicates a demand-paged executable with the header in the text. - It is used by 386BSD (and variants) and Linux, at least. */ -#ifndef QMAGIC -#define QMAGIC 0314 -#endif -# ifndef N_BADMAG -# define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \ - && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC \ - && N_MAGIC(x) != QMAGIC) -# endif /* N_BADMAG */ -#endif - -#endif - -#ifdef QMAGIC -#define N_IS_QMAGIC(x) (N_MAGIC (x) == QMAGIC) -#else -#define N_IS_QMAGIC(x) (0) -#endif - -/* The difference between TARGET_PAGE_SIZE and N_SEGSIZE is that TARGET_PAGE_SIZE is - the finest granularity at which you can page something, thus it - controls the padding (if any) before the text segment of a ZMAGIC - file. N_SEGSIZE is the resolution at which things can be marked as - read-only versus read/write, so it controls the padding between the - text segment and the data segment (in memory; on disk the padding - between them is TARGET_PAGE_SIZE). TARGET_PAGE_SIZE and N_SEGSIZE are the same - for most machines, but different for sun3. */ - -/* By default, segment size is constant. But some machines override this - to be a function of the a.out header (e.g. machine type). */ - -#ifndef N_SEGSIZE -#define N_SEGSIZE(x) SEGMENT_SIZE -#endif - -/* Virtual memory address of the text section. - This is getting very complicated. A good reason to discard a.out format - for something that specifies these fields explicitly. But til then... - - * OMAGIC and NMAGIC files: - (object files: text for "relocatable addr 0" right after the header) - start at 0, offset is EXEC_BYTES_SIZE, size as stated. - * The text address, offset, and size of ZMAGIC files depend - on the entry point of the file: - * entry point below TEXT_START_ADDR: - (hack for SunOS shared libraries) - start at 0, offset is 0, size as stated. - * If N_HEADER_IN_TEXT(x) is true (which defaults to being the - case when the entry point is EXEC_BYTES_SIZE or further into a page): - no padding is needed; text can start after exec header. Sun - considers the text segment of such files to include the exec header; - for BFD's purposes, we don't, which makes more work for us. - start at TEXT_START_ADDR + EXEC_BYTES_SIZE, offset is EXEC_BYTES_SIZE, - size as stated minus EXEC_BYTES_SIZE. - * If N_HEADER_IN_TEXT(x) is false (which defaults to being the case when - the entry point is less than EXEC_BYTES_SIZE into a page (e.g. page - aligned)): (padding is needed so that text can start at a page boundary) - start at TEXT_START_ADDR, offset TARGET_PAGE_SIZE, size as stated. - - Specific configurations may want to hardwire N_HEADER_IN_TEXT, - for efficiency or to allow people to play games with the entry point. - In that case, you would #define N_HEADER_IN_TEXT(x) as 1 for sunos, - and as 0 for most other hosts (Sony News, Vax Ultrix, etc). - (Do this in the appropriate bfd target file.) - (The default is a heuristic that will break if people try changing - the entry point, perhaps with the ld -e flag.) - - * QMAGIC is always like a ZMAGIC for which N_HEADER_IN_TEXT is true, - and for which the starting address is TARGET_PAGE_SIZE (or should this be - SEGMENT_SIZE?) (TEXT_START_ADDR only applies to ZMAGIC, not to QMAGIC). */ - -/* This macro is only relevant for ZMAGIC files; QMAGIC always has the header - in the text. */ -#ifndef N_HEADER_IN_TEXT -#define N_HEADER_IN_TEXT(x) \ - (((x).a_entry & (TARGET_PAGE_SIZE-1)) >= EXEC_BYTES_SIZE) -#endif - -/* Sun shared libraries, not linux. This macro is only relevant for ZMAGIC - files. */ -#ifndef N_SHARED_LIB -#if defined (TEXT_START_ADDR) && TEXT_START_ADDR == 0 -#define N_SHARED_LIB(x) (0) -#else -#define N_SHARED_LIB(x) ((x).a_entry < TEXT_START_ADDR) -#endif -#endif - -/* Returning 0 not TEXT_START_ADDR for OMAGIC and NMAGIC is based on - the assumption that we are dealing with a .o file, not an - executable. This is necessary for OMAGIC (but means we don't work - right on the output from ld -N); more questionable for NMAGIC. */ - -#ifndef N_TXTADDR -#define N_TXTADDR(x) \ - (/* The address of a QMAGIC file is always one page in, \ - with the header in the text. */ \ - N_IS_QMAGIC (x) \ - ? (bfd_vma) TARGET_PAGE_SIZE + EXEC_BYTES_SIZE \ - : (N_MAGIC (x) != ZMAGIC \ - ? (bfd_vma) 0 /* Object file or NMAGIC. */ \ - : (N_SHARED_LIB (x) \ - ? (bfd_vma) 0 \ - : (N_HEADER_IN_TEXT (x) \ - ? (bfd_vma) TEXT_START_ADDR + EXEC_BYTES_SIZE \ - : (bfd_vma) TEXT_START_ADDR)))) -#endif - -/* If N_HEADER_IN_TEXT is not true for ZMAGIC, there is some padding - to make the text segment start at a certain boundary. For most - systems, this boundary is TARGET_PAGE_SIZE. But for Linux, in the - time-honored tradition of crazy ZMAGIC hacks, it is 1024 which is - not what TARGET_PAGE_SIZE needs to be for QMAGIC. */ - -#ifndef ZMAGIC_DISK_BLOCK_SIZE -#define ZMAGIC_DISK_BLOCK_SIZE TARGET_PAGE_SIZE -#endif - -#define N_DISK_BLOCK_SIZE(x) \ - (N_MAGIC(x) == ZMAGIC ? ZMAGIC_DISK_BLOCK_SIZE : TARGET_PAGE_SIZE) - -/* Offset in an a.out of the start of the text section. */ -#ifndef N_TXTOFF -#define N_TXTOFF(x) \ - (/* For {O,N,Q}MAGIC, no padding. */ \ - N_MAGIC (x) != ZMAGIC \ - ? EXEC_BYTES_SIZE \ - : (N_SHARED_LIB (x) \ - ? 0 \ - : (N_HEADER_IN_TEXT (x) \ - ? EXEC_BYTES_SIZE /* No padding. */ \ - : ZMAGIC_DISK_BLOCK_SIZE /* A page of padding. */))) -#endif -/* Size of the text section. It's always as stated, except that we - offset it to `undo' the adjustment to N_TXTADDR and N_TXTOFF - for ZMAGIC files that nominally include the exec header - as part of the first page of text. (BFD doesn't consider the - exec header to be part of the text segment.) */ -#ifndef N_TXTSIZE -#define N_TXTSIZE(x) \ - (/* For QMAGIC, we don't consider the header part of the text section. */\ - N_IS_QMAGIC (x) \ - ? (x).a_text - EXEC_BYTES_SIZE \ - : ((N_MAGIC (x) != ZMAGIC || N_SHARED_LIB (x)) \ - ? (x).a_text \ - : (N_HEADER_IN_TEXT (x) \ - ? (x).a_text - EXEC_BYTES_SIZE /* No padding. */ \ - : (x).a_text /* A page of padding. */ ))) -#endif -/* The address of the data segment in virtual memory. - It is the text segment address, plus text segment size, rounded - up to a N_SEGSIZE boundary for pure or pageable files. */ -#ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC (x) == OMAGIC \ - ? (N_TXTADDR (x) + N_TXTSIZE (x)) \ - : (N_SEGSIZE (x) + ((N_TXTADDR (x) + N_TXTSIZE (x) - 1) \ - & ~ (bfd_vma) (N_SEGSIZE (x) - 1)))) -#endif -/* The address of the BSS segment -- immediately after the data segment. */ - -#define N_BSSADDR(x) (N_DATADDR (x) + (x).a_data) - -/* Offsets of the various portions of the file after the text segment. */ - -/* For {Q,Z}MAGIC, there is padding to make the data segment start on - a page boundary. Most of the time the a_text field (and thus - N_TXTSIZE) already contains this padding. It is possible that for - BSDI and/or 386BSD it sometimes doesn't contain the padding, and - perhaps we should be adding it here. But this seems kind of - questionable and probably should be BSDI/386BSD-specific if we do - do it. - - For NMAGIC (at least for hp300 BSD, probably others), there is - padding in memory only, not on disk, so we must *not* ever pad here - for NMAGIC. */ - -#ifndef N_DATOFF -#define N_DATOFF(x) (N_TXTOFF (x) + N_TXTSIZE (x)) -#endif -#ifndef N_TRELOFF -#define N_TRELOFF(x) (N_DATOFF (x) + (x).a_data) -#endif -#ifndef N_DRELOFF -#define N_DRELOFF(x) (N_TRELOFF (x) + (x).a_trsize) -#endif -#ifndef N_SYMOFF -#define N_SYMOFF(x) (N_DRELOFF (x) + (x).a_drsize) -#endif -#ifndef N_STROFF -#define N_STROFF(x) (N_SYMOFF (x) + (x).a_syms) -#endif - -/* Symbols */ -#ifndef external_nlist -struct external_nlist -{ - bfd_byte e_strx[BYTES_IN_WORD]; /* Index into string table of name. */ - bfd_byte e_type[1]; /* Type of symbol. */ - bfd_byte e_other[1]; /* Misc info (usually empty). */ - bfd_byte e_desc[2]; /* Description field. */ - bfd_byte e_value[BYTES_IN_WORD]; /* Value of symbol. */ -}; -#define EXTERNAL_NLIST_SIZE (BYTES_IN_WORD+4+BYTES_IN_WORD) -#endif - -struct internal_nlist -{ - unsigned long n_strx; /* Index into string table of name. */ - unsigned char n_type; /* Type of symbol. */ - unsigned char n_other; /* Misc info (usually empty). */ - unsigned short n_desc; /* Description field. */ - bfd_vma n_value; /* Value of symbol. */ -}; - -/* The n_type field is the symbol type, containing: */ - -#define N_UNDF 0 /* Undefined symbol. */ -#define N_ABS 2 /* Absolute symbol -- defined at particular addr. */ -#define N_TEXT 4 /* Text sym -- defined at offset in text seg. */ -#define N_DATA 6 /* Data sym -- defined at offset in data seg. */ -#define N_BSS 8 /* BSS sym -- defined at offset in zero'd seg. */ -#define N_COMM 0x12 /* Common symbol (visible after shared lib dynlink). */ -#define N_FN 0x1f /* File name of .o file. */ -#define N_FN_SEQ 0x0C /* N_FN from Sequent compilers (sigh). */ -/* Note: N_EXT can only be usefully OR-ed with N_UNDF, N_ABS, N_TEXT, - N_DATA, or N_BSS. When the low-order bit of other types is set, - (e.g. N_WARNING versus N_FN), they are two different types. */ -#define N_EXT 1 /* External symbol (as opposed to local-to-this-file). */ -#define N_TYPE 0x1e -#define N_STAB 0xe0 /* If any of these bits are on, it's a debug symbol. */ - -#define N_INDR 0x0a - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - elements value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol. */ -#define N_SETT 0x16 /* Text set element symbol. */ -#define N_SETD 0x18 /* Data set element symbol. */ -#define N_SETB 0x1A /* Bss set element symbol. */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - -/* Warning symbol. The text gives a warning message, the next symbol - in the table will be undefined. When the symbol is referenced, the - message is printed. */ - -#define N_WARNING 0x1e - -/* Weak symbols. These are a GNU extension to the a.out format. The - semantics are those of ELF weak symbols. Weak symbols are always - externally visible. The N_WEAK? values are squeezed into the - available slots. The value of a N_WEAKU symbol is 0. The values - of the other types are the definitions. */ -#define N_WEAKU 0x0d /* Weak undefined symbol. */ -#define N_WEAKA 0x0e /* Weak absolute symbol. */ -#define N_WEAKT 0x0f /* Weak text symbol. */ -#define N_WEAKD 0x10 /* Weak data symbol. */ -#define N_WEAKB 0x11 /* Weak bss symbol. */ - -/* Relocations - - There are two types of relocation flavours for a.out systems, - standard and extended. The standard form is used on systems where the - instruction has room for all the bits of an offset to the operand, whilst - the extended form is used when an address operand has to be split over n - instructions. Eg, on the 68k, each move instruction can reference - the target with a displacement of 16 or 32 bits. On the sparc, move - instructions use an offset of 14 bits, so the offset is stored in - the reloc field, and the data in the section is ignored. */ - -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct reloc_std_external -{ - bfd_byte r_address[BYTES_IN_WORD]; /* Offset of of data to relocate. */ - bfd_byte r_index[3]; /* Symbol table index of symbol. */ - bfd_byte r_type[1]; /* Relocation type. */ -}; - -#define RELOC_STD_BITS_PCREL_BIG ((unsigned int) 0x80) -#define RELOC_STD_BITS_PCREL_LITTLE ((unsigned int) 0x01) - -#define RELOC_STD_BITS_LENGTH_BIG ((unsigned int) 0x60) -#define RELOC_STD_BITS_LENGTH_SH_BIG 5 -#define RELOC_STD_BITS_LENGTH_LITTLE ((unsigned int) 0x06) -#define RELOC_STD_BITS_LENGTH_SH_LITTLE 1 - -#define RELOC_STD_BITS_EXTERN_BIG ((unsigned int) 0x10) -#define RELOC_STD_BITS_EXTERN_LITTLE ((unsigned int) 0x08) - -#define RELOC_STD_BITS_BASEREL_BIG ((unsigned int) 0x08) -#define RELOC_STD_BITS_BASEREL_LITTLE ((unsigned int) 0x10) - -#define RELOC_STD_BITS_JMPTABLE_BIG ((unsigned int) 0x04) -#define RELOC_STD_BITS_JMPTABLE_LITTLE ((unsigned int) 0x20) - -#define RELOC_STD_BITS_RELATIVE_BIG ((unsigned int) 0x02) -#define RELOC_STD_BITS_RELATIVE_LITTLE ((unsigned int) 0x40) - -#define RELOC_STD_SIZE (BYTES_IN_WORD + 3 + 1) /* Bytes per relocation entry. */ - -struct reloc_std_internal -{ - bfd_vma r_address; /* Address (within segment) to be relocated. */ - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in files the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* The next three bits are for SunOS shared libraries, and seem to - be undocumented. */ - unsigned int r_baserel:1; /* Linkage table relative. */ - unsigned int r_jmptable:1; /* pc-relative to jump table. */ - unsigned int r_relative:1; /* "relative relocation". */ - /* unused */ - unsigned int r_pad:1; /* Padding -- set to zero. */ -}; - - -/* EXTENDED RELOCS. */ - -struct reloc_ext_external -{ - bfd_byte r_address[BYTES_IN_WORD]; /* Offset of of data to relocate. */ - bfd_byte r_index[3]; /* Symbol table index of symbol. */ - bfd_byte r_type[1]; /* Relocation type. */ - bfd_byte r_addend[BYTES_IN_WORD]; /* Datum addend. */ -}; - -#ifndef RELOC_EXT_BITS_EXTERN_BIG -#define RELOC_EXT_BITS_EXTERN_BIG ((unsigned int) 0x80) -#endif - -#ifndef RELOC_EXT_BITS_EXTERN_LITTLE -#define RELOC_EXT_BITS_EXTERN_LITTLE ((unsigned int) 0x01) -#endif - -#ifndef RELOC_EXT_BITS_TYPE_BIG -#define RELOC_EXT_BITS_TYPE_BIG ((unsigned int) 0x1F) -#endif - -#ifndef RELOC_EXT_BITS_TYPE_SH_BIG -#define RELOC_EXT_BITS_TYPE_SH_BIG 0 -#endif - -#ifndef RELOC_EXT_BITS_TYPE_LITTLE -#define RELOC_EXT_BITS_TYPE_LITTLE ((unsigned int) 0xF8) -#endif - -#ifndef RELOC_EXT_BITS_TYPE_SH_LITTLE -#define RELOC_EXT_BITS_TYPE_SH_LITTLE 3 -#endif - -/* Bytes per relocation entry. */ -#define RELOC_EXT_SIZE (BYTES_IN_WORD + 3 + 1 + BYTES_IN_WORD) - -enum reloc_type -{ - /* Simple relocations. */ - RELOC_8, /* data[0:7] = addend + sv */ - RELOC_16, /* data[0:15] = addend + sv */ - RELOC_32, /* data[0:31] = addend + sv */ - /* PC-rel displacement. */ - RELOC_DISP8, /* data[0:7] = addend - pc + sv */ - RELOC_DISP16, /* data[0:15] = addend - pc + sv */ - RELOC_DISP32, /* data[0:31] = addend - pc + sv */ - /* Special. */ - RELOC_WDISP30, /* data[0:29] = (addend + sv - pc)>>2 */ - RELOC_WDISP22, /* data[0:21] = (addend + sv - pc)>>2 */ - RELOC_HI22, /* data[0:21] = (addend + sv)>>10 */ - RELOC_22, /* data[0:21] = (addend + sv) */ - RELOC_13, /* data[0:12] = (addend + sv) */ - RELOC_LO10, /* data[0:9] = (addend + sv) */ - RELOC_SFA_BASE, - RELOC_SFA_OFF13, - /* P.I.C. (base-relative). */ - RELOC_BASE10, /* Not sure - maybe we can do this the */ - RELOC_BASE13, /* right way now */ - RELOC_BASE22, - /* For some sort of pc-rel P.I.C. (?) */ - RELOC_PC10, - RELOC_PC22, - /* P.I.C. jump table. */ - RELOC_JMP_TBL, - /* Reputedly for shared libraries somehow. */ - RELOC_SEGOFF16, - RELOC_GLOB_DAT, - RELOC_JMP_SLOT, - RELOC_RELATIVE, - - RELOC_11, - RELOC_WDISP2_14, - RELOC_WDISP19, - RELOC_HHI22, /* data[0:21] = (addend + sv) >> 42 */ - RELOC_HLO10, /* data[0:9] = (addend + sv) >> 32 */ - - /* 29K relocation types. */ - RELOC_JUMPTARG, - RELOC_CONST, - RELOC_CONSTH, - - /* All the new ones I can think of, for sparc v9. */ - RELOC_64, /* data[0:63] = addend + sv */ - RELOC_DISP64, /* data[0:63] = addend - pc + sv */ - RELOC_WDISP21, /* data[0:20] = (addend + sv - pc)>>2 */ - RELOC_DISP21, /* data[0:20] = addend - pc + sv */ - RELOC_DISP14, /* data[0:13] = addend - pc + sv */ - /* Q . - What are the other ones, - Since this is a clean slate, can we throw away the ones we dont - understand ? Should we sort the values ? What about using a - microcode format like the 68k ? */ - NO_RELOC - }; - - -struct reloc_internal -{ - bfd_vma r_address; /* Offset of of data to relocate. */ - long r_index; /* Symbol table index of symbol. */ - enum reloc_type r_type; /* Relocation type. */ - bfd_vma r_addend; /* Datum addend. */ -}; - -/* Q. - Should the length of the string table be 4 bytes or 8 bytes ? - - Q. - What about archive indexes ? */ - -#endif /* __A_OUT_64_H__ */

aout64.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: stab_gnu.h =================================================================== --- stab_gnu.h (revision 816) +++ stab_gnu.h (nonexistent) @@ -1,54 +0,0 @@ -/* gnu_stab.h Definitions for GNU extensions to STABS - - Copyright 2001 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ -#ifndef __GNU_STAB__ - -/* Indicate the GNU stab.h is in use. */ - -#define __GNU_STAB__ - -#define __define_stab(NAME, CODE, STRING) NAME=CODE, -#define __define_stab_duplicate(NAME, CODE, STRING) NAME=CODE, - -enum __stab_debug_code -{ -#include "aout/stab.def" -LAST_UNUSED_STAB_CODE -}; - -#undef __define_stab - -/* Definitions of "desc" field for N_SO stabs in Solaris2. */ - -#define N_SO_AS 1 -#define N_SO_C 2 -#define N_SO_ANSI_C 3 -#define N_SO_CC 4 /* C++ */ -#define N_SO_FORTRAN 5 -#define N_SO_PASCAL 6 - -/* Solaris2: Floating point type values in basic types. */ - -#define NF_NONE 0 -#define NF_SINGLE 1 /* IEEE 32-bit */ -#define NF_DOUBLE 2 /* IEEE 64-bit */ -#define NF_COMPLEX 3 /* Fortran complex */ -#define NF_COMPLEX16 4 /* Fortran double complex */ -#define NF_COMPLEX32 5 /* Fortran complex*16 */ -#define NF_LDOUBLE 6 /* Long double (whatever that is) */ - -#endif /* __GNU_STAB_ */

stab_gnu.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: reloc.h =================================================================== --- reloc.h (revision 816) +++ reloc.h (nonexistent) @@ -1,66 +0,0 @@ -/* reloc.h -- Header file for relocation information. - Copyright 1989, 1990, 1991 Free Software Foundation, Inc. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* Relocation types for a.out files using reloc_info_extended - (SPARC and AMD 29000). */ - -#ifndef _RELOC_H_READ_ -#define _RELOC_H_READ_ 1 - -enum reloc_type - { - RELOC_8, RELOC_16, RELOC_32, /* simple relocations */ - RELOC_DISP8, RELOC_DISP16, RELOC_DISP32, /* pc-rel displacement */ - RELOC_WDISP30, RELOC_WDISP22, - RELOC_HI22, RELOC_22, - RELOC_13, RELOC_LO10, - RELOC_SFA_BASE, RELOC_SFA_OFF13, - RELOC_BASE10, RELOC_BASE13, RELOC_BASE22, /* P.I.C. (base-relative) */ - RELOC_PC10, RELOC_PC22, /* for some sort of pc-rel P.I.C. (?) */ - RELOC_JMP_TBL, /* P.I.C. jump table */ - RELOC_SEGOFF16, /* reputedly for shared libraries somehow */ - RELOC_GLOB_DAT, RELOC_JMP_SLOT, RELOC_RELATIVE, - RELOC_11, - RELOC_WDISP2_14, - RELOC_WDISP19, - RELOC_HHI22, - RELOC_HLO10, - - /* 29K relocation types */ - RELOC_JUMPTARG, RELOC_CONST, RELOC_CONSTH, - - RELOC_WDISP14, RELOC_WDISP21, - - NO_RELOC - }; - -#define RELOC_TYPE_NAMES \ -"8", "16", "32", "DISP8", \ -"DISP16", "DISP32", "WDISP30", "WDISP22", \ -"HI22", "22", "13", "LO10", \ -"SFA_BASE", "SFAOFF13", "BASE10", "BASE13", \ -"BASE22", "PC10", "PC22", "JMP_TBL", \ -"SEGOFF16", "GLOB_DAT", "JMP_SLOT", "RELATIVE", \ -"11", "WDISP2_14", "WDISP19", "HHI22", \ -"HLO10", \ -"JUMPTARG", "CONST", "CONSTH", "WDISP14", \ -"WDISP21", \ -"NO_RELOC" - -#endif /* _RELOC_H_READ_ */ - -/* end of reloc.h */

reloc.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: encap.h =================================================================== --- encap.h (revision 816) +++ encap.h (nonexistent) @@ -1,134 +0,0 @@ -/* Yet Another Try at encapsulating bsd object files in coff. - Copyright 1988, 1989, 1991 Free Software Foundation, Inc. - Written by Pace Willisson 12/9/88 - - This file is obsolete. It needs to be converted to just define a bunch - of stuff that BFD can use to do coff-encapsulated files. --gnu@cygnus.com - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* - * We only use the coff headers to tell the kernel - * how to exec the file. Therefore, the only fields that need to - * be filled in are the scnptr and vaddr for the text and data - * sections, and the vaddr for the bss. As far as coff is concerned, - * there is no symbol table, relocation, or line numbers. - * - * A normal bsd header (struct exec) is placed after the coff headers, - * and before the real text. I defined a the new fields 'a_machtype' - * and a_flags. If a_machtype is M_386, and a_flags & A_ENCAP is - * true, then the bsd header is preceeded by a coff header. Macros - * like N_TXTOFF and N_TXTADDR use this field to find the bsd header. - * - * The only problem is to track down the bsd exec header. The - * macros HEADER_OFFSET, etc do this. - */ - -#define N_FLAGS_COFF_ENCAPSULATE 0x20 /* coff header precedes bsd header */ - -/* Describe the COFF header used for encapsulation. */ - -struct coffheader -{ - /* filehdr */ - unsigned short f_magic; - unsigned short f_nscns; - long f_timdat; - long f_symptr; - long f_nsyms; - unsigned short f_opthdr; - unsigned short f_flags; - /* aouthdr */ - short magic; - short vstamp; - long tsize; - long dsize; - long bsize; - long entry; - long text_start; - long data_start; - struct coffscn - { - char s_name[8]; - long s_paddr; - long s_vaddr; - long s_size; - long s_scnptr; - long s_relptr; - long s_lnnoptr; - unsigned short s_nreloc; - unsigned short s_nlnno; - long s_flags; - } scns[3]; -}; - -/* Describe some of the parameters of the encapsulation, - including how to find the encapsulated BSD header. */ - -/* FIXME, this is dumb. The same tools can't handle a.outs for different - architectures, just because COFF_MAGIC is different; so you need a - separate GNU nm for every architecture!!? Unfortunately, it needs to - be this way, since the COFF_MAGIC value is determined by the kernel - we're trying to fool here. */ - -#define COFF_MAGIC_I386 0514 /* I386MAGIC */ -#define COFF_MAGIC_M68K 0520 /* MC68MAGIC */ - -#ifdef COFF_MAGIC -short __header_offset_temp; -#define HEADER_OFFSET(f) \ - (__header_offset_temp = 0, \ - fread ((char *)&__header_offset_temp, sizeof (short), 1, (f)), \ - fseek ((f), -sizeof (short), 1), \ - __header_offset_temp==COFF_MAGIC ? sizeof(struct coffheader) : 0) -#else -#define HEADER_OFFSET(f) 0 -#endif - -#define HEADER_SEEK(f) (fseek ((f), HEADER_OFFSET((f)), 1)) - -/* Describe the characteristics of the BSD header - that appears inside the encapsulation. */ - -/* Encapsulated coff files that are linked ZMAGIC have a text segment - offset just past the header (and a matching TXTADDR), excluding - the headers from the text segment proper but keeping the physical - layout and the virtual memory layout page-aligned. - - Non-encapsulated a.out files that are linked ZMAGIC have a text - segment that starts at 0 and an N_TXTADR similarly offset to 0. - They too are page-aligned with each other, but they include the - a.out header as part of the text. - - The _N_HDROFF gets sizeof struct exec added to it, so we have - to compensate here. See . */ - -#undef _N_HDROFF -#undef N_TXTADDR -#undef N_DATADDR - -#define _N_HDROFF(x) ((N_FLAGS(x) & N_FLAGS_COFF_ENCAPSULATE) ? \ - sizeof (struct coffheader) : 0) - -/* Address of text segment in memory after it is loaded. */ -#define N_TXTADDR(x) \ - ((N_FLAGS(x) & N_FLAGS_COFF_ENCAPSULATE) ? \ - sizeof (struct coffheader) + sizeof (struct exec) : 0) -#define SEGMENT_SIZE 0x400000 - -#define N_DATADDR(x) \ - ((N_FLAGS(x) & N_FLAGS_COFF_ENCAPSULATE) ? \ - (SEGMENT_SIZE + ((N_TXTADDR(x)+(x).a_text-1) & ~(SEGMENT_SIZE-1))) : \ - (N_TXTADDR(x)+(x).a_text))

encap.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: hp.h =================================================================== --- hp.h (revision 816) +++ hp.h (nonexistent) @@ -1,82 +0,0 @@ -/* Special version of for use under hp-ux. - Copyright 1988, 1991 Free Software Foundation, Inc. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* THIS FILE IS OBSOLETE. It needs to be revised as a variant "external" - a.out format for use with BFD. */ - -/* The `exec' structure and overall layout must be close to HP's when - we are running on an HP system, otherwise we will not be able to - execute the resulting file. */ - -/* Allow this file to be included twice. */ -#ifndef __GNU_EXEC_MACROS__ - -struct exec -{ - unsigned short a_machtype; /* machine type */ - unsigned short a_magic; /* magic number */ - unsigned long a_spare1; - unsigned long a_spare2; - unsigned long a_text; /* length of text, in bytes */ - unsigned long a_data; /* length of data, in bytes */ - unsigned long a_bss; /* length of uninitialized data area for file, in bytes */ - unsigned long a_trsize; /* length of relocation info for text, in bytes */ - unsigned long a_drsize; /* length of relocation info for data, in bytes */ - unsigned long a_spare3; /* HP = pascal interface size */ - unsigned long a_spare4; /* HP = symbol table size */ - unsigned long a_spare5; /* HP = debug name table size */ - unsigned long a_entry; /* start address */ - unsigned long a_spare6; /* HP = source line table size */ - unsigned long a_spare7; /* HP = value table size */ - unsigned long a_syms; /* length of symbol table data in file, in bytes */ - unsigned long a_spare8; -}; - -/* Tell a.out.gnu.h not to define `struct exec'. */ -#define __STRUCT_EXEC_OVERRIDE__ - -#include "../a.out.gnu.h" - -#undef N_MAGIC -#undef N_MACHTYPE -#undef N_FLAGS -#undef N_SET_INFO -#undef N_SET_MAGIC -#undef N_SET_MACHTYPE -#undef N_SET_FLAGS - -#define N_MAGIC(exec) ((exec) . a_magic) -#define N_MACHTYPE(exec) ((exec) . a_machtype) -#define N_SET_MAGIC(exec, magic) (((exec) . a_magic) = (magic)) -#define N_SET_MACHTYPE(exec, machtype) (((exec) . a_machtype) = (machtype)) - -#undef N_BADMAG -#define N_BADMAG(x) ((_N_BADMAG (x)) || (_N_BADMACH (x))) - -#define _N_BADMACH(x) \ -(((N_MACHTYPE (x)) != HP9000S200_ID) && \ - ((N_MACHTYPE (x)) != HP98x6_ID)) - -#define HP98x6_ID 0x20A -#define HP9000S200_ID 0x20C - -#undef _N_HDROFF -#define _N_HDROFF(x) (SEGMENT_SIZE - (sizeof (struct exec))) - -#define SEGMENT_SIZE 0x1000 - -#endif /* __GNU_EXEC_MACROS__ */

hp.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: ranlib.h =================================================================== --- ranlib.h (revision 816) +++ ranlib.h (nonexistent) @@ -1,62 +0,0 @@ -/* ranlib.h -- archive library index member definition for GNU. - Copyright 1990, 1991 Free Software Foundation, Inc. - -This program is free software; you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation; either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program; if not, write to the Free Software -Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ - -/* The Symdef member of an archive contains two things: - a table that maps symbol-string offsets to file offsets, - and a symbol-string table. All the symbol names are - run together (each with trailing null) in the symbol-string - table. There is a single longword bytecount on the front - of each of these tables. Thus if we have two symbols, - "foo" and "_bar", that are in archive members at offsets - 200 and 900, it would look like this: - 16 ; byte count of index table - 0 ; offset of "foo" in string table - 200 ; offset of foo-module in file - 4 ; offset of "bar" in string table - 900 ; offset of bar-module in file - 9 ; byte count of string table - "foo\0_bar\0" ; string table */ - -#define RANLIBMAG "__.SYMDEF" /* Archive file name containing index */ -#define RANLIBSKEW 3 /* Creation time offset */ - -/* Format of __.SYMDEF: - First, a longword containing the size of the 'symdef' data that follows. - Second, zero or more 'symdef' structures. - Third, a longword containing the length of symbol name strings. - Fourth, zero or more symbol name strings (each followed by a null). */ - -struct symdef - { - union - { - unsigned long string_offset; /* In the file */ - char *name; /* In memory, sometimes */ - } s; - /* this points to the front of the file header (AKA member header -- - a struct ar_hdr), not to the front of the file or into the file). - in other words it only tells you which file to read */ - unsigned long file_offset; - }; - -/* Compatability with BSD code */ - -#define ranlib symdef -#define ran_un s -#define ran_strx string_offset -#define ran_name name -#define ran_off file_offset

ranlib.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property Index: hppa.h =================================================================== --- hppa.h (revision 816) +++ hppa.h (nonexistent) @@ -1,7 +0,0 @@ -#include "filehdr.h" -#include "aouthdr.h" -#include "scnhdr.h" -#include "spacehdr.h" -#include "syms.h" - -

hppa.h Property changes : Deleted: svn:eol-style ## -1 +0,0 ## -native \ No newline at end of property Deleted: svn:keywords ## -1 +0,0 ## -Id \ No newline at end of property