OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /openrisc/trunk/gnu-old/gdb-7.1/gdb/config/i386
    from Rev 834 to Rev 842
    Reverse comparison

Rev 834 → Rev 842

/nbsdelf.mh
0,0 → 1,5
# Host: NetBSD/i386 ELF
NATDEPFILES= fork-child.o inf-ptrace.o \
nbsd-nat.o i386bsd-nat.o i386nbsd-nat.o bsd-kvm.o
 
LOADLIBES= -lkvm
/fbsd.mh
0,0 → 1,7
# Host: FreeBSD/i386
NATDEPFILES= fork-child.o inf-ptrace.o \
fbsd-nat.o i386-nat.o i386bsd-nat.o i386fbsd-nat.o \
bsd-kvm.o
NAT_FILE= nm-fbsd.h
 
LOADLIBES= -lkvm
/nbsdaout.mh
0,0 → 1,6
# Host: NetBSD/i386 a.out
NATDEPFILES= fork-child.o inf-ptrace.o \
nbsd-nat.o i386bsd-nat.o i386nbsd-nat.o bsd-kvm.o \
solib.o solib-sunos.o
 
LOADLIBES= -lkvm
/obsdaout.mh
0,0 → 1,6
# Host: OpenBSD/i386 a.out
NATDEPFILES= fork-child.o inf-ptrace.o \
i386bsd-nat.o i386nbsd-nat.o i386obsd-nat.o bsd-kvm.o \
solib.o solib-sunos.o
 
LOADLIBES= -lkvm
/mingw.mh
0,0 → 1,3
MH_CFLAGS=
NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o
XM_CLIBS=
/nm-i386sol2.h
0,0 → 1,32
/* Native support for i386 running Solaris 2.
Copyright 1998, 1999, 2000, 2007, 2008, 2009, 2010
Free Software Foundation, Inc.
 
This file is part of GDB.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
 
#ifdef NEW_PROC_API /* Solaris 6 and above can do HW watchpoints */
 
/* Solaris x86 2.6 and 2.7 targets have a kernel bug when stepping
over an instruction that causes a page fault without triggering
a hardware watchpoint. The kernel properly notices that it shouldn't
stop, because the hardware watchpoint is not triggered, but it forgets
the step request and continues the program normally.
Work around the problem by removing hardware watchpoints if a step is
requested, GDB will check for a hardware watchpoint trigger after the
step anyway. */
#define CANNOT_STEP_HW_WATCHPOINTS
 
#endif /* NEW_PROC_API */
nm-i386sol2.h Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Id \ No newline at end of property Index: darwin.mh =================================================================== --- darwin.mh (nonexistent) +++ darwin.mh (revision 842) @@ -0,0 +1,4 @@ +# Host: IA86 running Darwin + +NATDEPFILES = fork-child.o machoread.o darwin-nat.o \ + i386-darwin-nat.o i386-nat.o amd64-nat.o darwin-nat-info.o Index: obsd.mh =================================================================== --- obsd.mh (nonexistent) +++ obsd.mh (revision 842) @@ -0,0 +1,5 @@ +# Host: OpenBSD/i386 ELF +NATDEPFILES= fork-child.o inf-ptrace.o \ + i386bsd-nat.o i386obsd-nat.o bsd-kvm.o + +LOADLIBES= -lkvm Index: fbsd64.mh =================================================================== --- fbsd64.mh (nonexistent) +++ fbsd64.mh (revision 842) @@ -0,0 +1,6 @@ +# Host: FreeBSD/amd64 +NATDEPFILES= fork-child.o inf-ptrace.o \ + fbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64fbsd-nat.o \ + bsd-kvm.o + +LOADLIBES= -lkvm Index: i386sol2.mh =================================================================== --- i386sol2.mh (nonexistent) +++ i386sol2.mh (revision 842) @@ -0,0 +1,4 @@ +# Host: Solaris x86 +NATDEPFILES= fork-child.o i386v4-nat.o i386-sol2-nat.o \ + procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o +NAT_FILE= nm-i386sol2.h Index: nm-linux.h =================================================================== --- nm-linux.h (nonexistent) +++ nm-linux.h (revision 842) @@ -0,0 +1,32 @@ +/* Native support for GNU/Linux x86. + + Copyright 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, + 2000, 2001, 2002, 2003, 2005, 2007, 2008, 2009, 2010 + Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef NM_LINUX_H +#define NM_LINUX_H + +#include "config/nm-linux.h" + +#ifdef HAVE_PTRACE_GETFPXREGS +/* Include register set support for the SSE registers. */ +#define FILL_FPXREGSET +#endif + +#endif /* nm-linux.h */
nm-linux.h Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Id \ No newline at end of property Index: mingw64.mh =================================================================== --- mingw64.mh (nonexistent) +++ mingw64.mh (revision 842) @@ -0,0 +1 @@ +NATDEPFILES= i386-nat.o windows-nat.o amd64-windows-nat.o Index: nm-i386gnu.h =================================================================== --- nm-i386gnu.h (nonexistent) +++ nm-i386gnu.h (revision 842) @@ -0,0 +1,38 @@ +/* Native-dependent definitions for Intel 386 running the GNU Hurd + Copyright 1994, 1995, 1996, 2002, 2007, 2008, 2009, 2010 + Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef NM_I386GNU_H +#define NM_I386GNU_H + +#include +#include +#include +#include "regcache.h" + +extern char *gnu_target_pid_to_str (int pid); + +/* Thread flavors used in re-setting the T bit. */ +#define THREAD_STATE_FLAVOR i386_REGS_SEGS_STATE +#define THREAD_STATE_SIZE i386_THREAD_STATE_COUNT +#define THREAD_STATE_SET_TRACED(state) \ + ((struct i386_thread_state *) (state))->efl |= 0x100 +#define THREAD_STATE_CLEAR_TRACED(state) \ + ((((struct i386_thread_state *) (state))->efl &= ~0x100), 1) + +#endif /* nm-i386gnu.h */
nm-i386gnu.h Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Id \ No newline at end of property Index: linux.mh =================================================================== --- linux.mh (nonexistent) +++ linux.mh (revision 842) @@ -0,0 +1,11 @@ +# Host: Intel 386 running GNU/Linux. + +NAT_FILE= nm-linux.h +NATDEPFILES= inf-ptrace.o fork-child.o \ + i386-nat.o i386-linux-nat.o \ + proc-service.o linux-thread-db.o \ + linux-nat.o linux-fork.o + +# The dynamically loaded libthread_db needs access to symbols in the +# gdb executable. +LOADLIBES = -ldl -rdynamic Index: cygwin.mh =================================================================== --- cygwin.mh (nonexistent) +++ cygwin.mh (revision 842) @@ -0,0 +1,3 @@ +MH_CFLAGS= +NATDEPFILES= i386-nat.o windows-nat.o i386-windows-nat.o +XM_CLIBS= Index: nbsd64.mh =================================================================== --- nbsd64.mh (nonexistent) +++ nbsd64.mh (revision 842) @@ -0,0 +1,3 @@ +# Host: NetBSD/amd64 +NATDEPFILES= fork-child.o inf-ptrace.o \ + nbsd-nat.o amd64-nat.o amd64bsd-nat.o amd64nbsd-nat.o Index: nto.mh =================================================================== --- nto.mh (nonexistent) +++ nto.mh (revision 842) @@ -0,0 +1,4 @@ +# Host: Intel 386 running QNX. + +NATDEPFILES= nto-procfs.o +NAT_FILE= config/nm-nto.h Index: obsd64.mh =================================================================== --- obsd64.mh (nonexistent) +++ obsd64.mh (revision 842) @@ -0,0 +1,5 @@ +# Host: OpenBSD/amd64 +NATDEPFILES= fork-child.o inf-ptrace.o \ + amd64-nat.o amd64bsd-nat.o amd64obsd-nat.o bsd-kvm.o + +LOADLIBES= -lkvm Index: i386gnu.mh =================================================================== --- i386gnu.mh (nonexistent) +++ i386gnu.mh (revision 842) @@ -0,0 +1,36 @@ +# Host: Intel 386 running the GNU Hurd +NATDEPFILES= i386gnu-nat.o gnu-nat.o corelow.o core-regset.o fork-child.o \ + notify_S.o process_reply_S.o msg_reply_S.o \ + msg_U.o exc_request_U.o exc_request_S.o + +NAT_FILE= nm-i386gnu.h +MH_CFLAGS = -D_GNU_SOURCE + +XM_CLIBS = -lshouldbeinlibc + +# Use our own user stubs for the msg rpcs, so we can make them time out, in +# case the program is fucked, or we guess the wrong signal thread. +msg-MIGUFLAGS = -D'MSG_IMPORTS=waittime 1000;' + +# ick +MIGCOM = $(MIG) -cc cat - /dev/null + +# Reply servers need special massaging of the code mig generates, to make +# them work correctly for error returns in some cases. +%_reply_S.h %_reply_S.c: %_reply.defs + $(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \ + | $(MIGCOM) -sheader $*_reply_S.h -server $*_reply_S.raw -user /dev/null -header /dev/null \ + && $(AWK) -f $(srcdir)/reply_mig_hack.awk < $*_reply_S.raw > $*_reply_S.c +# Normal servers +%_S.h %_S.c: %.defs + $(CPP) $(CPPFLAGS) -DSERVERPREFIX=S_ -x c $< \ + | $(MIGCOM) -sheader $*_S.h -server $*_S.c -user /dev/null -header /dev/null +# User rpc stubs +%_U.h %_U.c: %.defs + $(CPP) $(CPPFLAGS) $($*-MIGUFLAGS) -x c $< \ + | $(MIGCOM) -sheader /dev/null -server /dev/null -user $*_U.c -header $*_U.h + +NAT_GENERATED_FILES = notify_S.h notify_S.c \ + process_reply_S.h process_reply_S.c \ + msg_reply_S.h msg_reply_S.c msg_U.h msg_U.c \ + exc_request_U.h exc_request_U.c exc_request_S.h exc_request_S.c Index: sol2-64.mh =================================================================== --- sol2-64.mh (nonexistent) +++ sol2-64.mh (revision 842) @@ -0,0 +1,4 @@ +# Host: Solaris x86_64 +NATDEPFILES= fork-child.o amd64-nat.o i386v4-nat.o i386-sol2-nat.o \ + procfs.o proc-api.o proc-events.o proc-flags.o proc-why.o +NAT_FILE= nm-i386sol2.h Index: nm-fbsd.h =================================================================== --- nm-fbsd.h (nonexistent) +++ nm-fbsd.h (revision 842) @@ -0,0 +1,28 @@ +/* Native-dependent definitions for FreeBSD/i386. + + Copyright 1986, 1987, 1989, 1992, 1994, 1996, 1997, 2000, 2001, 2004, 2005, + 2007, 2008, 2009, 2010 Free Software Foundation, Inc. + + This file is part of GDB. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +#ifndef NM_FBSD_H +#define NM_FBSD_H + +#ifdef HAVE_SYS_PARAM_H +#include +#endif + +#endif /* nm-fbsd.h */
nm-fbsd.h Property changes : Added: svn:eol-style ## -0,0 +1 ## +native \ No newline at end of property Added: svn:keywords ## -0,0 +1 ## +Id \ No newline at end of property Index: linux64.mh =================================================================== --- linux64.mh (nonexistent) +++ linux64.mh (revision 842) @@ -0,0 +1,9 @@ +# Host: GNU/Linux x86-64 +NATDEPFILES= inf-ptrace.o fork-child.o \ + i386-nat.o amd64-nat.o amd64-linux-nat.o linux-nat.o \ + proc-service.o linux-thread-db.o linux-fork.o +NAT_FILE= config/nm-linux.h + +# The dynamically loaded libthread_db needs access to symbols in the +# gdb executable. +LOADLIBES = -ldl -rdynamic Index: go32.mh =================================================================== --- go32.mh (nonexistent) +++ go32.mh (revision 842) @@ -0,0 +1,12 @@ +# Host: Intel x86 running DJGPP + +# We include several header files from config/djgpp +MH_CFLAGS= -I$(srcdir)/config/djgpp + +NATDEPFILES= go32-nat.o i386-nat.o + +HOST_IPC= +CC= gcc +XM_CLIBS= -ldbg + +

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.