URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/gnu-old/gdb-7.1/readline/examples/rlfe
- from Rev 816 to Rev 834
- ↔ Reverse comparison
Rev 816 → Rev 834
/ChangeLog
File deleted
ChangeLog
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: os.h
===================================================================
--- os.h (revision 816)
+++ os.h (nonexistent)
@@ -1,529 +0,0 @@
-/* Copyright (c) 1993-2002
- * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
- * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
- * Copyright (c) 1987 Oliver Laumann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program (see the file COPYING); if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- ****************************************************************
- */
-
-#include
-#include
-
-#include
-
-/* In strict ANSI mode, HP-UX machines define __hpux but not hpux */
-#if defined(__hpux) && !defined(hpux)
-# define hpux
-#endif
-
-#if defined(__bsdi__) || defined(__386BSD__) || defined(_CX_UX) || defined(hpux) || defined(_IBMR2) || defined(linux)
-# include
-#endif /* __bsdi__ || __386BSD__ || _CX_UX || hpux || _IBMR2 || linux */
-
-#ifdef ISC
-# ifdef ENAMETOOLONG
-# undef ENAMETOOLONG
-# endif
-# ifdef ENOTEMPTY
-# undef ENOTEMPTY
-# endif
-# include
-# include
-#endif
-
-#ifdef sun
-# define getpgrp __getpgrp
-# define exit __exit
-#endif
-#ifdef POSIX
-# include
-# if defined(__STDC__)
-# include
-# endif /* __STDC__ */
-#endif /* POSIX */
-#ifdef sun
-# undef getpgrp
-# undef exit
-#endif /* sun */
-
-#ifndef linux /* all done in */
-extern int errno;
-#endif /* linux */
-#ifndef HAVE_STRERROR
-/* No macros, please */
-#undef strerror
-#endif
-
-#if !defined(SYSV) && !defined(linux)
-# ifdef NEWSOS
-# define strlen ___strlen___
-# include
-# undef strlen
-# else /* NEWSOS */
-# include
-# endif /* NEWSOS */
-#else /* SYSV */
-# if defined(SVR4) || defined(NEWSOS)
-# define strlen ___strlen___
-# include
-# undef strlen
-# if !defined(NEWSOS) && !defined(__hpux)
- extern size_t strlen(const char *);
-# endif
-# else /* SVR4 */
-# include
-# endif /* SVR4 */
-#endif /* SYSV */
-
-#ifdef USEVARARGS
-# if defined(__STDC__)
-# include
-# define VA_LIST(var) va_list var;
-# define VA_DOTS ...
-# define VA_DECL
-# define VA_START(ap, fmt) va_start(ap, fmt)
-# define VA_ARGS(ap) ap
-# define VA_END(ap) va_end(ap)
-# else
-# include
-# define VA_LIST(var) va_list var;
-# define VA_DOTS va_alist
-# define VA_DECL va_dcl
-# define VA_START(ap, fmt) va_start(ap)
-# define VA_ARGS(ap) ap
-# define VA_END(ap) va_end(ap)
-# endif
-#else
-# define VA_LIST(var)
-# define VA_DOTS p1, p2, p3, p4, p5, p6
-# define VA_DECL unsigned long VA_DOTS;
-# define VA_START(ap, fmt)
-# define VA_ARGS(ap) VA_DOTS
-# define VA_END(ap)
-# undef vsnprintf
-# define vsnprintf xsnprintf
-#endif
-
-#if !defined(sun) && !defined(B43) && !defined(ISC) && !defined(pyr) && !defined(_CX_UX)
-# include
-#endif
-#include
-
-#ifdef M_UNIX /* SCO */
-# include
-# include
-# define ftruncate(fd, s) chsize(fd, s)
-#endif
-
-#ifdef SYSV
-# define index strchr
-# define rindex strrchr
-# define bzero(poi,len) memset(poi,0,len)
-# define bcmp memcmp
-# define killpg(pgrp,sig) kill( -(pgrp), sig)
-#endif
-
-#ifndef HAVE_GETCWD
-# define getcwd(b,l) getwd(b)
-#endif
-
-#ifndef USEBCOPY
-# ifdef USEMEMMOVE
-# define bcopy(s,d,len) memmove(d,s,len)
-# else
-# ifdef USEMEMCPY
-# define bcopy(s,d,len) memcpy(d,s,len)
-# else
-# define NEED_OWN_BCOPY
-# define bcopy xbcopy
-# endif
-# endif
-#endif
-
-#ifdef hpux
-# define setreuid(ruid, euid) setresuid(ruid, euid, -1)
-# define setregid(rgid, egid) setresgid(rgid, egid, -1)
-#endif
-
-#if defined(HAVE_SETEUID) || defined(HAVE_SETREUID)
-# define USE_SETEUID
-#endif
-
-#if !defined(HAVE__EXIT) && !defined(_exit)
-#define _exit(x) exit(x)
-#endif
-
-#ifndef HAVE_UTIMES
-# define utimes utime
-#endif
-
-#ifdef BUILTIN_TELNET
-# include
-# include
-#endif
-
-#if defined(USE_LOCALE) && (!defined(HAVE_SETLOCALE) || !defined(HAVE_STRFTIME))
-# undef USE_LOCALE
-#endif
-
-/*****************************************************************
- * terminal handling
- */
-
-#ifdef POSIX
-# include
-# ifdef hpux
-# include
-# endif /* hpux */
-# ifdef NCCS
-# define MAXCC NCCS
-# else
-# define MAXCC 256
-# endif
-#else /* POSIX */
-# ifdef TERMIO
-# include
-# ifdef NCC
-# define MAXCC NCC
-# else
-# define MAXCC 256
-# endif
-# ifdef CYTERMIO
-# include
-# endif
-# else /* TERMIO */
-# include
-# endif /* TERMIO */
-#endif /* POSIX */
-
-#ifndef VDISABLE
-# ifdef _POSIX_VDISABLE
-# define VDISABLE _POSIX_VDISABLE
-# else
-# define VDISABLE 0377
-# endif /* _POSIX_VDISABLE */
-#endif /* !VDISABLE */
-
-
-/* on sgi, regardless of the stream head's read mode (RNORM/RMSGN/RMSGD)
- * TIOCPKT mode causes data loss if our buffer is too small (IOSIZE)
- * to hold the whole packet at first read().
- * (Marc Boucher)
- *
- * matthew green:
- * TIOCPKT is broken on dgux 5.4.1 generic AViiON mc88100
- *
- * Joe Traister: On AIX4, programs like irc won't work if screen
- * uses TIOCPKT (select fails to return on pty read).
- */
-#if defined(sgi) || defined(DGUX) || defined(_IBMR2)
-# undef TIOCPKT
-#endif
-
-/* linux ncurses is broken, we have to use our own tputs */
-#if defined(linux) && defined(TERMINFO)
-# define tputs xtputs
-#endif
-
-/* Alexandre Oliva: SVR4 style ptys don't work with osf */
-#ifdef __osf__
-# undef HAVE_SVR4_PTYS
-#endif
-
-/*****************************************************************
- * utmp handling
- */
-
-#ifdef GETUTENT
- typedef char *slot_t;
-#else
- typedef int slot_t;
-#endif
-
-#if defined(UTMPOK) || defined(BUGGYGETLOGIN)
-# if defined(SVR4) && !defined(DGUX) && !defined(__hpux) && !defined(linux)
-# include
-# define UTMPFILE UTMPX_FILE
-# define utmp utmpx
-# define getutent getutxent
-# define getutid getutxid
-# define getutline getutxline
-# define pututline pututxline
-# define setutent setutxent
-# define endutent endutxent
-# define ut_time ut_xtime
-# else /* SVR4 */
-# include
-# endif /* SVR4 */
-# ifdef apollo
- /*
- * We don't have GETUTENT, so we dig into utmp ourselves.
- * But we save the permanent filedescriptor and
- * open utmp just when we need to.
- * This code supports an unsorted utmp. jw.
- */
-# define UTNOKEEP
-# endif /* apollo */
-
-# ifndef UTMPFILE
-# ifdef UTMP_FILE
-# define UTMPFILE UTMP_FILE
-# else
-# ifdef _PATH_UTMP
-# define UTMPFILE _PATH_UTMP
-# else
-# define UTMPFILE "/etc/utmp"
-# endif /* _PATH_UTMP */
-# endif
-# endif
-
-#endif /* UTMPOK || BUGGYGETLOGIN */
-
-#if !defined(UTMPOK) && defined(USRLIMIT)
-# undef USRLIMIT
-#endif
-
-#ifdef LOGOUTOK
-# ifndef LOGINDEFAULT
-# define LOGINDEFAULT 0
-# endif
-#else
-# ifdef LOGINDEFAULT
-# undef LOGINDEFAULT
-# endif
-# define LOGINDEFAULT 1
-#endif
-
-
-/*****************************************************************
- * file stuff
- */
-
-#ifndef F_OK
-#define F_OK 0
-#endif
-#ifndef X_OK
-#define X_OK 1
-#endif
-#ifndef W_OK
-#define W_OK 2
-#endif
-#ifndef R_OK
-#define R_OK 4
-#endif
-
-#ifndef S_IFIFO
-#define S_IFIFO 0010000
-#endif
-#ifndef S_IREAD
-#define S_IREAD 0000400
-#endif
-#ifndef S_IWRITE
-#define S_IWRITE 0000200
-#endif
-#ifndef S_IEXEC
-#define S_IEXEC 0000100
-#endif
-
-#if defined(S_IFIFO) && defined(S_IFMT) && !defined(S_ISFIFO)
-#define S_ISFIFO(mode) (((mode) & S_IFMT) == S_IFIFO)
-#endif
-#if defined(S_IFSOCK) && defined(S_IFMT) && !defined(S_ISSOCK)
-#define S_ISSOCK(mode) (((mode) & S_IFMT) == S_IFSOCK)
-#endif
-#if defined(S_IFCHR) && defined(S_IFMT) && !defined(S_ISCHR)
-#define S_ISCHR(mode) (((mode) & S_IFMT) == S_IFCHR)
-#endif
-#if defined(S_IFDIR) && defined(S_IFMT) && !defined(S_ISDIR)
-#define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR)
-#endif
-#if defined(S_IFLNK) && defined(S_IFMT) && !defined(S_ISLNK)
-#define S_ISLNK(mode) (((mode) & S_IFMT) == S_IFLNK)
-#endif
-
-/*
- * SunOS 4.1.3: `man 2V open' has only one line that mentions O_NOBLOCK:
- *
- * O_NONBLOCK Same as O_NDELAY above.
- *
- * on the very same SunOS 4.1.3, I traced the open system call and found
- * that an open("/dev/ttyy08", O_RDWR|O_NONBLOCK|O_NOCTTY) was blocked,
- * whereas open("/dev/ttyy08", O_RDWR|O_NDELAY |O_NOCTTY) went through.
- *
- * For this simple reason I now favour O_NDELAY. jw. 4.5.95
- */
-#if defined(sun) && !defined(SVR4)
-# undef O_NONBLOCK
-#endif
-
-#if !defined(O_NONBLOCK) && defined(O_NDELAY)
-# define O_NONBLOCK O_NDELAY
-#endif
-
-#if !defined(FNBLOCK) && defined(FNONBLOCK)
-# define FNBLOCK FNONBLOCK
-#endif
-#if !defined(FNBLOCK) && defined(FNDELAY)
-# define FNBLOCK FNDELAY
-#endif
-#if !defined(FNBLOCK) && defined(O_NONBLOCK)
-# define FNBLOCK O_NONBLOCK
-#endif
-
-#ifndef POSIX
-#undef mkfifo
-#define mkfifo(n,m) mknod(n,S_IFIFO|(m),0)
-#endif
-
-#if !defined(HAVE_LSTAT) && !defined(lstat)
-# define lstat stat
-#endif
-
-/*****************************************************************
- * signal handling
- */
-
-#ifdef SIGVOID
-# define SIGRETURN
-# define sigret_t void
-#else
-# define SIGRETURN return 0;
-# define sigret_t int
-#endif
-
-/* Geeeee, reverse it? */
-#if defined(SVR4) || (defined(SYSV) && defined(ISC)) || defined(_AIX) || defined(linux) || defined(ultrix) || defined(__386BSD__) || defined(__bsdi__) || defined(POSIX) || defined(NeXT)
-# define SIGHASARG
-#endif
-
-#ifdef SIGHASARG
-# define SIGPROTOARG (int)
-# define SIGDEFARG (sigsig) int sigsig;
-# define SIGARG 0
-#else
-# define SIGPROTOARG (void)
-# define SIGDEFARG ()
-# define SIGARG
-#endif
-
-#ifndef SIGCHLD
-#define SIGCHLD SIGCLD
-#endif
-
-#if defined(POSIX) || defined(hpux)
-# define signal xsignal
-#else
-# ifdef USESIGSET
-# define signal sigset
-# endif /* USESIGSET */
-#endif
-
-/* used in screen.c and attacher.c */
-#ifndef NSIG /* kbeal needs these w/o SYSV */
-# define NSIG 32
-#endif /* !NSIG */
-
-
-/*****************************************************************
- * Wait stuff
- */
-
-#if (!defined(sysV68) && !defined(M_XENIX)) || defined(NeXT) || defined(M_UNIX)
-# include
-#endif
-
-#ifndef WTERMSIG
-# ifndef BSDWAIT /* if wait is NOT a union: */
-# define WTERMSIG(status) (status & 0177)
-# else
-# define WTERMSIG(status) status.w_T.w_Termsig
-# endif
-#endif
-
-#ifndef WSTOPSIG
-# ifndef BSDWAIT /* if wait is NOT a union: */
-# define WSTOPSIG(status) ((status >> 8) & 0377)
-# else
-# define WSTOPSIG(status) status.w_S.w_Stopsig
-# endif
-#endif
-
-/* NET-2 uses WCOREDUMP */
-#if defined(WCOREDUMP) && !defined(WIFCORESIG)
-# define WIFCORESIG(status) WCOREDUMP(status)
-#endif
-
-#ifndef WIFCORESIG
-# ifndef BSDWAIT /* if wait is NOT a union: */
-# define WIFCORESIG(status) (status & 0200)
-# else
-# define WIFCORESIG(status) status.w_T.w_Coredump
-# endif
-#endif
-
-#ifndef WEXITSTATUS
-# ifndef BSDWAIT /* if wait is NOT a union: */
-# define WEXITSTATUS(status) ((status >> 8) & 0377)
-# else
-# define WEXITSTATUS(status) status.w_T.w_Retcode
-# endif
-#endif
-
-
-/*****************************************************************
- * select stuff
- */
-
-#if defined(M_XENIX) || defined(M_UNIX) || defined(_SEQUENT_)
-#include /* for timeval + FD... */
-#endif
-
-/*
- * SunOS 3.5 - Tom Schmidt - Micron Semiconductor, Inc - 27-Jul-93
- * tschmidt@vax.micron.com
- */
-#ifndef FD_SET
-# ifndef SUNOS3
-typedef struct fd_set { int fds_bits[1]; } fd_set;
-# endif
-# define FD_ZERO(fd) ((fd)->fds_bits[0] = 0)
-# define FD_SET(b, fd) ((fd)->fds_bits[0] |= 1 << (b))
-# define FD_ISSET(b, fd) ((fd)->fds_bits[0] & 1 << (b))
-# define FD_SETSIZE 32
-#endif
-
-
-/*****************************************************************
- * user defineable stuff
- */
-
-#ifndef TERMCAP_BUFSIZE
-# define TERMCAP_BUFSIZE 2048
-#endif
-
-#ifndef MAXPATHLEN
-# define MAXPATHLEN 1024
-#endif
-
-/*
- * you may try to vary this value. Use low values if your (VMS) system
- * tends to choke when pasting. Use high values if you want to test
- * how many characters your pty's can buffer.
- */
-#define IOSIZE 4096
-
os.h
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: extern.h
===================================================================
--- extern.h (revision 816)
+++ extern.h (nonexistent)
@@ -1,32 +0,0 @@
-/* Copyright (c) 1993-2002
- * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
- * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
- * Copyright (c) 1987 Oliver Laumann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program (see the file COPYING); if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- ****************************************************************
- */
-
-#if !defined(__GNUC__) || __GNUC__ < 2
-#undef __attribute__
-#define __attribute__(x)
-#endif
-
-/* pty.c */
-extern int OpenPTY __P((char **));
-extern void InitPTY __P((int));
-
extern.h
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: config.h.in
===================================================================
--- config.h.in (revision 816)
+++ config.h.in (nonexistent)
@@ -1,375 +0,0 @@
-/* Copyright 2004 Per Bothner
- * Based on config.h from screen-4.0.2.
- * Copyright (c) 1993-2000
- * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
- * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
- * Copyright (c) 1987 Oliver Laumann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program (see the file COPYING); if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- ****************************************************************
- * $Id: config.h.in,v 1.12 1994/05/31 12:31:36 mlschroe Exp $ FAU
- */
-
-
-
-
-
-/**********************************************************************
- *
- * User Configuration Section
- */
-
-
-/*
- * define PTYMODE if you do not like the default of 0622, which allows
- * public write to your pty.
- * define PTYGROUP to some numerical group-id if you do not want the
- * tty to be in "your" group.
- * Note, screen is unable to change mode or group of the pty if it
- * is not installed with sufficient privilege. (e.g. set-uid-root)
- * define PTYROFS if the /dev/pty devices are mounted on a read-only
- * filesystem so screen should not even attempt to set mode or group
- * even if running as root (e.g. on TiVo).
- */
-#undef PTYMODE
-#undef PTYGROUP
-#undef PTYROFS
-
-/*
- * If screen is NOT installed set-uid root, screen can provide tty
- * security by exclusively locking the ptys. While this keeps other
- * users from opening your ptys, it also keeps your own subprocesses
- * from being able to open /dev/tty. Define LOCKPTY to add this
- * exclusive locking.
- */
-#undef LOCKPTY
-
-
-/**********************************************************************
- *
- * End of User Configuration Section
- *
- * Rest of this file is modified by 'configure'
- * Change at your own risk!
- *
- */
-
-/*
- * Some defines to identify special unix variants
- */
-#ifndef SVR4
-#undef SVR4
-#endif
-
-#ifndef _POSIX_SOURCE
-#undef _POSIX_SOURCE
-#endif
-
-/*
- * Define POSIX if your system supports IEEE Std 1003.1-1988 (POSIX).
- */
-#undef POSIX
-
-/*
- * Define TERMIO if you have struct termio instead of struct sgttyb.
- * This is usually the case for SVID systems, where BSD uses sgttyb.
- * POSIX systems should define this anyway, even though they use
- * struct termios.
- */
-#undef TERMIO
-
-/*
- * Define CYTERMIO if you have cyrillic termio modes.
- */
-#undef CYTERMIO
-
-/*
- * Define TERMINFO if your machine emulates the termcap routines
- * with the terminfo database.
- * Thus the .screenrc file is parsed for
- * the command 'terminfo' and not 'termcap'.
- */
-#undef TERMINFO
-
-/*
- * If your library does not define ospeed, define this.
- */
-#undef NEED_OSPEED
-
-/*
- * Define SYSV if your machine is SYSV complient (Sys V, HPUX, A/UX)
- */
-#ifndef SYSV
-#undef SYSV
-#endif
-
-/*
- * Define SIGVOID if your signal handlers return void. On older
- * systems, signal returns int, but on newer ones, it returns void.
- */
-#undef SIGVOID
-
-/*
- * Define USESIGSET if you have sigset for BSD 4.1 reliable signals.
- */
-#undef USESIGSET
-
-/*
- * Define SYSVSIGS if signal handlers must be reinstalled after
- * they have been called.
- */
-#undef SYSVSIGS
-
-/*
- * Define BSDWAIT if your system defines a 'union wait' in
- *
- * Only allow BSDWAIT i.e. wait3 on nonposix systems, since
- * posix implies wait(3) and waitpid(3). vdlinden@fwi.uva.nl
- *
- */
-#ifndef POSIX
-#undef BSDWAIT
-#endif
-
-/*
- * On RISCOS we prefer wait2() over wait3(). rouilj@sni-usa.com
- */
-#ifdef BSDWAIT
-#undef USE_WAIT2
-#endif
-
-/*
- * Define if you have the utempter utmp helper program
- */
-#undef HAVE_UTEMPTER
-
-/*
- * If ttyslot() breaks getlogin() by returning indexes to utmp entries
- * of type DEAD_PROCESS, then our getlogin() replacement should be
- * selected by defining BUGGYGETLOGIN.
- */
-#undef BUGGYGETLOGIN
-
-/*
- * If your system has the calls setreuid() and setregid(),
- * define HAVE_SETREUID. Otherwise screen will use a forked process to
- * safely create output files without retaining any special privileges.
- */
-#undef HAVE_SETREUID
-
-/*
- * If your system supports BSD4.4's seteuid() and setegid(), define
- * HAVE_SETEUID.
- */
-#undef HAVE_SETEUID
-
-/*
- * If you want the "time" command to display the current load average
- * define LOADAV. Maybe you must install screen with the needed
- * privileges to read /dev/kmem.
- * Note that NLIST_ stuff is only checked, when getloadavg() is not available.
- */
-#undef LOADAV
-
-#undef LOADAV_NUM
-#undef LOADAV_TYPE
-#undef LOADAV_SCALE
-#undef LOADAV_GETLOADAVG
-#undef LOADAV_UNIX
-#undef LOADAV_AVENRUN
-#undef LOADAV_USE_NLIST64
-
-#undef NLIST_DECLARED
-#undef NLIST_STRUCT
-#undef NLIST_NAME_UNION
-
-/*
- * If your system has the new format /etc/ttys (like 4.3 BSD) and the
- * getttyent(3) library functions, define GETTTYENT.
- */
-#undef GETTTYENT
-
-/*
- * Define USEBCOPY if the bcopy/memcpy from your system's C library
- * supports the overlapping of source and destination blocks. When
- * undefined, screen uses its own (probably slower) version of bcopy().
- *
- * SYSV machines may have a working memcpy() -- Oh, this is
- * quite unlikely. Tell me if you see one.
- * "But then, memmove() should work, if at all available" he thought...
- * Boing, never say "works everywhere" unless you checked SCO UNIX.
- * Their memove fails the test in the configure script. Sigh. (Juergen)
- */
-#undef USEBCOPY
-#undef USEMEMCPY
-#undef USEMEMMOVE
-
-/*
- * If your system has vsprintf() and requires the use of the macros in
- * "varargs.h" to use functions with variable arguments,
- * define USEVARARGS.
- */
-#undef USEVARARGS
-
-/*
- * If your system has strerror() define this.
- */
-#undef HAVE_STRERROR
-
-/*
- * If the select return value doesn't treat a descriptor that is
- * usable for reading and writing as two hits, define SELECT_BROKEN.
- */
-#undef SELECT_BROKEN
-
-/*
- * Define this if your system supports named pipes.
- */
-#undef NAMEDPIPE
-
-/*
- * Define this if your system exits select() immediatly if a pipe is
- * opened read-only and no writer has opened it.
- */
-#undef BROKEN_PIPE
-
-/*
- * Define this if the unix-domain socket implementation doesn't
- * create a socket in the filesystem.
- */
-#undef SOCK_NOT_IN_FS
-
-/*
- * If your system has setenv() and unsetenv() define USESETENV
- */
-#undef USESETENV
-
-/*
- * If your system does not come with a setenv()/putenv()/getenv()
- * functions, you may bring in our own code by defining NEEDPUTENV.
- */
-#undef NEEDPUTENV
-
-/*
- * If the passwords are stored in a shadow file and you want the
- * builtin lock to work properly, define SHADOWPW.
- */
-#undef SHADOWPW
-
-/*
- * If you are on a SYS V machine that restricts filename length to 14
- * characters, you may need to enforce that by setting NAME_MAX to 14
- */
-#undef NAME_MAX /* KEEP_UNDEF_HERE override system value */
-#undef NAME_MAX
-
-/*
- * define HAVE_RENAME if your system has a rename() function
- */
-#undef HAVE_RENAME
-
-/*
- * define HAVE__EXIT if your system has the _exit() call.
- */
-#undef HAVE__EXIT
-
-/*
- * define HAVE_LSTAT if your system has symlinks and the lstat() call.
- */
-#undef HAVE_LSTAT
-
-/*
- * define HAVE_UTIMES if your system has the utimes() call.
- */
-#undef HAVE_UTIMES
-
-/*
- * define HAVE_FCHOWN if your system has the fchown() call.
- */
-#undef HAVE_FCHOWN
-
-/*
- * define HAVE_FCHMOD if your system has the fchmod() call.
- */
-#undef HAVE_FCHMOD
-
-/*
- * define HAVE_VSNPRINTF if your system has vsnprintf() (GNU lib).
- */
-#undef HAVE_VSNPRINTF
-
-/*
- * define HAVE_GETCWD if your system has the getcwd() call.
- */
-#undef HAVE_GETCWD
-
-/*
- * define HAVE_SETLOCALE if your system has the setlocale() call.
- */
-#undef HAVE_SETLOCALE
-
-/*
- * define HAVE_STRFTIME if your system has the strftime() call.
- */
-#undef HAVE_STRFTIME
-
-/*
- * define HAVE_NL_LANGINFO if your system has the nl_langinfo() call
- * and defines CODESET.
- */
-#undef HAVE_NL_LANGINFO
-
-/*
- * Newer versions of Solaris include fdwalk, which can greatly improve
- * the startup time of screen; otherwise screen spends a lot of time
- * closing file descriptors.
- */
-#undef HAVE_FDWALK
-
-/*
- * define HAVE_DEV_PTC if you have a /dev/ptc character special
- * device.
- */
-#undef HAVE_DEV_PTC
-
-/*
- * define HAVE_SVR4_PTYS if you have a /dev/ptmx character special
- * device and support the ptsname(), grantpt(), unlockpt() functions.
- */
-#undef HAVE_SVR4_PTYS
-
-/*
- * define HAVE_GETPT if you have the getpt() function.
- */
-#undef HAVE_GETPT
-
-/*
- * define HAVE_OPENPTY if your system has the openpty() call.
- */
-#undef HAVE_OPENPTY
-
-/*
- * define PTYRANGE0 and or PTYRANGE1 if you want to adapt screen
- * to unusual environments. E.g. For SunOs the defaults are "qpr" and
- * "0123456789abcdef". For SunOs 4.1.2
- * #define PTYRANGE0 "pqrstuvwxyzPQRST"
- * is recommended by Dan Jacobson.
- */
-#undef PTYRANGE0
-#undef PTYRANGE1
-
-#define USEVARARGS
Index: configure
===================================================================
--- configure (revision 816)
+++ configure (nonexistent)
@@ -1,5258 +0,0 @@
-#! /bin/sh
-# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.64.
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
-# Foundation, Inc.
-#
-# This configure script is free software; the Free Software Foundation
-# gives unlimited permission to copy, distribute and modify it.
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test "x$CONFIG_SHELL" = x; then
- as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '\${1+\"\$@\"}'='\"\$@\"'
- setopt NO_GLOB_SUBST
-else
- case \`(set -o) 2>/dev/null\` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-"
- as_required="as_fn_return () { (exit \$1); }
-as_fn_success () { as_fn_return 0; }
-as_fn_failure () { as_fn_return 1; }
-as_fn_ret_success () { return 0; }
-as_fn_ret_failure () { return 1; }
-
-exitcode=0
-as_fn_success || { exitcode=1; echo as_fn_success failed.; }
-as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
-as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
-as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
-if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
-
-else
- exitcode=1; echo positional parameters were not saved.
-fi
-test x\$exitcode = x0 || exit 1"
- as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
- as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
- eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
- test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
-test \$(( 1 + 1 )) = 2 || exit 1"
- if (eval "$as_required") 2>/dev/null; then :
- as_have_required=yes
-else
- as_have_required=no
-fi
- if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
-
-else
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-as_found=false
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- as_found=:
- case $as_dir in #(
- /*)
- for as_base in sh bash ksh sh5; do
- # Try only shells that exist, to save several forks.
- as_shell=$as_dir/$as_base
- if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
- CONFIG_SHELL=$as_shell as_have_required=yes
- if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
- break 2
-fi
-fi
- done;;
- esac
- as_found=false
-done
-$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
- { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
- CONFIG_SHELL=$SHELL as_have_required=yes
-fi; }
-IFS=$as_save_IFS
-
-
- if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
-fi
-
- if test x$as_have_required = xno; then :
- $as_echo "$0: This script requires a shell more modern than all"
- $as_echo "$0: the shells that I found on your system."
- if test x${ZSH_VERSION+set} = xset ; then
- $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
- $as_echo "$0: be upgraded to zsh 4.3.4 or later."
- else
- $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
- fi
- exit 1
-fi
-fi
-fi
-SHELL=${CONFIG_SHELL-/bin/sh}
-export SHELL
-# Unset more variables known to interfere with behavior of common tools.
-CLICOLOR_FORCE= GREP_OPTIONS=
-unset CLICOLOR_FORCE GREP_OPTIONS
-
-## --------------------- ##
-## M4sh Shell Functions. ##
-## --------------------- ##
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
- fi
- $as_echo "$as_me: error: $1" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-
- as_lineno_1=$LINENO as_lineno_1a=$LINENO
- as_lineno_2=$LINENO as_lineno_2a=$LINENO
- eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
- test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
- # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
- sed -n '
- p
- /[$]LINENO/=
- ' <$as_myself |
- sed '
- s/[$]LINENO.*/&-/
- t lineno
- b
- :lineno
- N
- :loop
- s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
- t loop
- s/-\n.*//
- ' >$as_me.lineno &&
- chmod +x "$as_me.lineno" ||
- { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
-
- # Don't try to exec as it changes $[0], causing all sort of problems
- # (the dirname of $[0] is not the place where we might find the
- # original and so on. Autoconf is especially sensitive to this).
- . "./$as_me.lineno"
- # Exit status is that of the last command.
- exit
-}
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 7<&0 &1
-
-# Name of the host.
-# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
-# so uname gets run too.
-ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
-
-#
-# Initializations.
-#
-ac_default_prefix=/usr/local
-ac_clean_files=
-ac_config_libobj_dir=.
-LIBOBJS=
-cross_compiling=no
-subdirs=
-MFLAGS=
-MAKEFLAGS=
-
-# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
-
-ac_unique_file="rlfe.c"
-ac_subst_vars='LTLIBOBJS
-LIBOBJS
-XTERMPATH
-WRITEPATH
-AWK
-EGREP
-GREP
-CPP
-OBJEXT
-EXEEXT
-ac_ct_CC
-CPPFLAGS
-LDFLAGS
-CFLAGS
-CC
-VERSION
-target_alias
-host_alias
-build_alias
-LIBS
-ECHO_T
-ECHO_N
-ECHO_C
-DEFS
-mandir
-localedir
-libdir
-psdir
-pdfdir
-dvidir
-htmldir
-infodir
-docdir
-oldincludedir
-includedir
-localstatedir
-sharedstatedir
-sysconfdir
-datadir
-datarootdir
-libexecdir
-sbindir
-bindir
-program_transform_name
-prefix
-exec_prefix
-PACKAGE_URL
-PACKAGE_BUGREPORT
-PACKAGE_STRING
-PACKAGE_VERSION
-PACKAGE_TARNAME
-PACKAGE_NAME
-PATH_SEPARATOR
-SHELL'
-ac_subst_files=''
-ac_user_opts='
-enable_option_checking
-with_pty_mode
-with_pty_group
-'
- ac_precious_vars='build_alias
-host_alias
-target_alias
-CC
-CFLAGS
-LDFLAGS
-LIBS
-CPPFLAGS
-CPP'
-
-
-# Initialize some variables set by options.
-ac_init_help=
-ac_init_version=false
-ac_unrecognized_opts=
-ac_unrecognized_sep=
-# The variables have the same names as the options, with
-# dashes changed to underlines.
-cache_file=/dev/null
-exec_prefix=NONE
-no_create=
-no_recursion=
-prefix=NONE
-program_prefix=NONE
-program_suffix=NONE
-program_transform_name=s,x,x,
-silent=
-site=
-srcdir=
-verbose=
-x_includes=NONE
-x_libraries=NONE
-
-# Installation directory options.
-# These are left unexpanded so users can "make install exec_prefix=/foo"
-# and all the variables that are supposed to be based on exec_prefix
-# by default will actually change.
-# Use braces instead of parens because sh, perl, etc. also accept them.
-# (The list follows the same order as the GNU Coding Standards.)
-bindir='${exec_prefix}/bin'
-sbindir='${exec_prefix}/sbin'
-libexecdir='${exec_prefix}/libexec'
-datarootdir='${prefix}/share'
-datadir='${datarootdir}'
-sysconfdir='${prefix}/etc'
-sharedstatedir='${prefix}/com'
-localstatedir='${prefix}/var'
-includedir='${prefix}/include'
-oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
-infodir='${datarootdir}/info'
-htmldir='${docdir}'
-dvidir='${docdir}'
-pdfdir='${docdir}'
-psdir='${docdir}'
-libdir='${exec_prefix}/lib'
-localedir='${datarootdir}/locale'
-mandir='${datarootdir}/man'
-
-ac_prev=
-ac_dashdash=
-for ac_option
-do
- # If the previous option needs an argument, assign it.
- if test -n "$ac_prev"; then
- eval $ac_prev=\$ac_option
- ac_prev=
- continue
- fi
-
- case $ac_option in
- *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
- *) ac_optarg=yes ;;
- esac
-
- # Accept the important Cygnus configure options, so we can diagnose typos.
-
- case $ac_dashdash$ac_option in
- --)
- ac_dashdash=yes ;;
-
- -bindir | --bindir | --bindi | --bind | --bin | --bi)
- ac_prev=bindir ;;
- -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
- bindir=$ac_optarg ;;
-
- -build | --build | --buil | --bui | --bu)
- ac_prev=build_alias ;;
- -build=* | --build=* | --buil=* | --bui=* | --bu=*)
- build_alias=$ac_optarg ;;
-
- -cache-file | --cache-file | --cache-fil | --cache-fi \
- | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
- ac_prev=cache_file ;;
- -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
- | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
- cache_file=$ac_optarg ;;
-
- --config-cache | -C)
- cache_file=config.cache ;;
-
- -datadir | --datadir | --datadi | --datad)
- ac_prev=datadir ;;
- -datadir=* | --datadir=* | --datadi=* | --datad=*)
- datadir=$ac_optarg ;;
-
- -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
- | --dataroo | --dataro | --datar)
- ac_prev=datarootdir ;;
- -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
- | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
- datarootdir=$ac_optarg ;;
-
- -disable-* | --disable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=no ;;
-
- -docdir | --docdir | --docdi | --doc | --do)
- ac_prev=docdir ;;
- -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
- docdir=$ac_optarg ;;
-
- -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
- ac_prev=dvidir ;;
- -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
- dvidir=$ac_optarg ;;
-
- -enable-* | --enable-*)
- ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid feature name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"enable_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval enable_$ac_useropt=\$ac_optarg ;;
-
- -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
- | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
- | --exec | --exe | --ex)
- ac_prev=exec_prefix ;;
- -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
- | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
- | --exec=* | --exe=* | --ex=*)
- exec_prefix=$ac_optarg ;;
-
- -gas | --gas | --ga | --g)
- # Obsolete; use --with-gas.
- with_gas=yes ;;
-
- -help | --help | --hel | --he | -h)
- ac_init_help=long ;;
- -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
- ac_init_help=recursive ;;
- -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
- ac_init_help=short ;;
-
- -host | --host | --hos | --ho)
- ac_prev=host_alias ;;
- -host=* | --host=* | --hos=* | --ho=*)
- host_alias=$ac_optarg ;;
-
- -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
- ac_prev=htmldir ;;
- -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
- | --ht=*)
- htmldir=$ac_optarg ;;
-
- -includedir | --includedir | --includedi | --included | --include \
- | --includ | --inclu | --incl | --inc)
- ac_prev=includedir ;;
- -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
- | --includ=* | --inclu=* | --incl=* | --inc=*)
- includedir=$ac_optarg ;;
-
- -infodir | --infodir | --infodi | --infod | --info | --inf)
- ac_prev=infodir ;;
- -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
- infodir=$ac_optarg ;;
-
- -libdir | --libdir | --libdi | --libd)
- ac_prev=libdir ;;
- -libdir=* | --libdir=* | --libdi=* | --libd=*)
- libdir=$ac_optarg ;;
-
- -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
- | --libexe | --libex | --libe)
- ac_prev=libexecdir ;;
- -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
- | --libexe=* | --libex=* | --libe=*)
- libexecdir=$ac_optarg ;;
-
- -localedir | --localedir | --localedi | --localed | --locale)
- ac_prev=localedir ;;
- -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
- localedir=$ac_optarg ;;
-
- -localstatedir | --localstatedir | --localstatedi | --localstated \
- | --localstate | --localstat | --localsta | --localst | --locals)
- ac_prev=localstatedir ;;
- -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
- | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
- localstatedir=$ac_optarg ;;
-
- -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
- ac_prev=mandir ;;
- -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
- mandir=$ac_optarg ;;
-
- -nfp | --nfp | --nf)
- # Obsolete; use --without-fp.
- with_fp=no ;;
-
- -no-create | --no-create | --no-creat | --no-crea | --no-cre \
- | --no-cr | --no-c | -n)
- no_create=yes ;;
-
- -no-recursion | --no-recursion | --no-recursio | --no-recursi \
- | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
- no_recursion=yes ;;
-
- -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
- | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
- | --oldin | --oldi | --old | --ol | --o)
- ac_prev=oldincludedir ;;
- -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
- | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
- | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
- oldincludedir=$ac_optarg ;;
-
- -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
- ac_prev=prefix ;;
- -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
- prefix=$ac_optarg ;;
-
- -program-prefix | --program-prefix | --program-prefi | --program-pref \
- | --program-pre | --program-pr | --program-p)
- ac_prev=program_prefix ;;
- -program-prefix=* | --program-prefix=* | --program-prefi=* \
- | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
- program_prefix=$ac_optarg ;;
-
- -program-suffix | --program-suffix | --program-suffi | --program-suff \
- | --program-suf | --program-su | --program-s)
- ac_prev=program_suffix ;;
- -program-suffix=* | --program-suffix=* | --program-suffi=* \
- | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
- program_suffix=$ac_optarg ;;
-
- -program-transform-name | --program-transform-name \
- | --program-transform-nam | --program-transform-na \
- | --program-transform-n | --program-transform- \
- | --program-transform | --program-transfor \
- | --program-transfo | --program-transf \
- | --program-trans | --program-tran \
- | --progr-tra | --program-tr | --program-t)
- ac_prev=program_transform_name ;;
- -program-transform-name=* | --program-transform-name=* \
- | --program-transform-nam=* | --program-transform-na=* \
- | --program-transform-n=* | --program-transform-=* \
- | --program-transform=* | --program-transfor=* \
- | --program-transfo=* | --program-transf=* \
- | --program-trans=* | --program-tran=* \
- | --progr-tra=* | --program-tr=* | --program-t=*)
- program_transform_name=$ac_optarg ;;
-
- -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
- ac_prev=pdfdir ;;
- -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
- pdfdir=$ac_optarg ;;
-
- -psdir | --psdir | --psdi | --psd | --ps)
- ac_prev=psdir ;;
- -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
- psdir=$ac_optarg ;;
-
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- silent=yes ;;
-
- -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
- ac_prev=sbindir ;;
- -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
- | --sbi=* | --sb=*)
- sbindir=$ac_optarg ;;
-
- -sharedstatedir | --sharedstatedir | --sharedstatedi \
- | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
- | --sharedst | --shareds | --shared | --share | --shar \
- | --sha | --sh)
- ac_prev=sharedstatedir ;;
- -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
- | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
- | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
- | --sha=* | --sh=*)
- sharedstatedir=$ac_optarg ;;
-
- -site | --site | --sit)
- ac_prev=site ;;
- -site=* | --site=* | --sit=*)
- site=$ac_optarg ;;
-
- -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
- ac_prev=srcdir ;;
- -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
- srcdir=$ac_optarg ;;
-
- -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
- | --syscon | --sysco | --sysc | --sys | --sy)
- ac_prev=sysconfdir ;;
- -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
- | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
- sysconfdir=$ac_optarg ;;
-
- -target | --target | --targe | --targ | --tar | --ta | --t)
- ac_prev=target_alias ;;
- -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
- target_alias=$ac_optarg ;;
-
- -v | -verbose | --verbose | --verbos | --verbo | --verb)
- verbose=yes ;;
-
- -version | --version | --versio | --versi | --vers | -V)
- ac_init_version=: ;;
-
- -with-* | --with-*)
- ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=\$ac_optarg ;;
-
- -without-* | --without-*)
- ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
- # Reject names that are not valid shell variable names.
- expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
- as_fn_error "invalid package name: $ac_useropt"
- ac_useropt_orig=$ac_useropt
- ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
- case $ac_user_opts in
- *"
-"with_$ac_useropt"
-"*) ;;
- *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
- ac_unrecognized_sep=', ';;
- esac
- eval with_$ac_useropt=no ;;
-
- --x)
- # Obsolete; use --with-x.
- with_x=yes ;;
-
- -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
- | --x-incl | --x-inc | --x-in | --x-i)
- ac_prev=x_includes ;;
- -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
- | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
- x_includes=$ac_optarg ;;
-
- -x-libraries | --x-libraries | --x-librarie | --x-librari \
- | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
- ac_prev=x_libraries ;;
- -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
- | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
- x_libraries=$ac_optarg ;;
-
- -*) as_fn_error "unrecognized option: \`$ac_option'
-Try \`$0 --help' for more information."
- ;;
-
- *=*)
- ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
- # Reject names that are not valid shell variable names.
- case $ac_envvar in #(
- '' | [0-9]* | *[!_$as_cr_alnum]* )
- as_fn_error "invalid variable name: \`$ac_envvar'" ;;
- esac
- eval $ac_envvar=\$ac_optarg
- export $ac_envvar ;;
-
- *)
- # FIXME: should be removed in autoconf 3.0.
- $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
- expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
- $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
- : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
- ;;
-
- esac
-done
-
-if test -n "$ac_prev"; then
- ac_option=--`echo $ac_prev | sed 's/_/-/g'`
- as_fn_error "missing argument to $ac_option"
-fi
-
-if test -n "$ac_unrecognized_opts"; then
- case $enable_option_checking in
- no) ;;
- fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
- *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
- esac
-fi
-
-# Check all directory arguments for consistency.
-for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
- datadir sysconfdir sharedstatedir localstatedir includedir \
- oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
- libdir localedir mandir
-do
- eval ac_val=\$$ac_var
- # Remove trailing slashes.
- case $ac_val in
- */ )
- ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
- eval $ac_var=\$ac_val;;
- esac
- # Be sure to have absolute directory names.
- case $ac_val in
- [\\/$]* | ?:[\\/]* ) continue;;
- NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
- esac
- as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
-done
-
-# There might be people who depend on the old broken behavior: `$host'
-# used to hold the argument of --host etc.
-# FIXME: To remove some day.
-build=$build_alias
-host=$host_alias
-target=$target_alias
-
-# FIXME: To remove some day.
-if test "x$host_alias" != x; then
- if test "x$build_alias" = x; then
- cross_compiling=maybe
- $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used." >&2
- elif test "x$build_alias" != "x$host_alias"; then
- cross_compiling=yes
- fi
-fi
-
-ac_tool_prefix=
-test -n "$host_alias" && ac_tool_prefix=$host_alias-
-
-test "$silent" = yes && exec 6>/dev/null
-
-
-ac_pwd=`pwd` && test -n "$ac_pwd" &&
-ac_ls_di=`ls -di .` &&
-ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
- as_fn_error "working directory cannot be determined"
-test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
- as_fn_error "pwd does not report name of working directory"
-
-
-# Find the source files, if location was not specified.
-if test -z "$srcdir"; then
- ac_srcdir_defaulted=yes
- # Try the directory containing this script, then the parent directory.
- ac_confdir=`$as_dirname -- "$as_myself" ||
-$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_myself" : 'X\(//\)[^/]' \| \
- X"$as_myself" : 'X\(//\)$' \| \
- X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_myself" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- srcdir=$ac_confdir
- if test ! -r "$srcdir/$ac_unique_file"; then
- srcdir=..
- fi
-else
- ac_srcdir_defaulted=no
-fi
-if test ! -r "$srcdir/$ac_unique_file"; then
- test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
- as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
-fi
-ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
-ac_abs_confdir=`(
- cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
- pwd)`
-# When building in place, set srcdir=.
-if test "$ac_abs_confdir" = "$ac_pwd"; then
- srcdir=.
-fi
-# Remove unnecessary trailing slashes from srcdir.
-# Double slashes in file names in object file debugging info
-# mess up M-x gdb in Emacs.
-case $srcdir in
-*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
-esac
-for ac_var in $ac_precious_vars; do
- eval ac_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_env_${ac_var}_value=\$${ac_var}
- eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
- eval ac_cv_env_${ac_var}_value=\$${ac_var}
-done
-
-#
-# Report the --help message.
-#
-if test "$ac_init_help" = "long"; then
- # Omit some internal or obsolete options to make the list less imposing.
- # This message is too long to be a string in the A/UX 3.1 sh.
- cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
-
-Usage: $0 [OPTION]... [VAR=VALUE]...
-
-To assign environment variables (e.g., CC, CFLAGS...), specify them as
-VAR=VALUE. See below for descriptions of some of the useful variables.
-
-Defaults for the options are specified in brackets.
-
-Configuration:
- -h, --help display this help and exit
- --help=short display options specific to this package
- --help=recursive display the short help of all the included packages
- -V, --version display version information and exit
- -q, --quiet, --silent do not print \`checking...' messages
- --cache-file=FILE cache test results in FILE [disabled]
- -C, --config-cache alias for \`--cache-file=config.cache'
- -n, --no-create do not create output files
- --srcdir=DIR find the sources in DIR [configure dir or \`..']
-
-Installation directories:
- --prefix=PREFIX install architecture-independent files in PREFIX
- [$ac_default_prefix]
- --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
- [PREFIX]
-
-By default, \`make install' will install all the files in
-\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
-an installation prefix other than \`$ac_default_prefix' using \`--prefix',
-for instance \`--prefix=\$HOME'.
-
-For better control, use the options below.
-
-Fine tuning of the installation directories:
- --bindir=DIR user executables [EPREFIX/bin]
- --sbindir=DIR system admin executables [EPREFIX/sbin]
- --libexecdir=DIR program executables [EPREFIX/libexec]
- --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
- --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
- --localstatedir=DIR modifiable single-machine data [PREFIX/var]
- --libdir=DIR object code libraries [EPREFIX/lib]
- --includedir=DIR C header files [PREFIX/include]
- --oldincludedir=DIR C header files for non-gcc [/usr/include]
- --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
- --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
- --infodir=DIR info documentation [DATAROOTDIR/info]
- --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
- --mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
- --htmldir=DIR html documentation [DOCDIR]
- --dvidir=DIR dvi documentation [DOCDIR]
- --pdfdir=DIR pdf documentation [DOCDIR]
- --psdir=DIR ps documentation [DOCDIR]
-_ACEOF
-
- cat <<\_ACEOF
-_ACEOF
-fi
-
-if test -n "$ac_init_help"; then
-
- cat <<\_ACEOF
-
-Optional Packages:
- --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
- --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-pty-mode=mode default mode for ptys
- --with-pty-group=group default group for ptys
-
-Some influential environment variables:
- CC C compiler command
- CFLAGS C compiler flags
- LDFLAGS linker flags, e.g. -L if you have libraries in a
- nonstandard directory
- LIBS libraries to pass to the linker, e.g. -l
- CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if
- you have headers in a nonstandard directory
- CPP C preprocessor
-
-Use these variables to override the choices made by `configure' or to help
-it to find libraries and programs with nonstandard names/locations.
-
-Report bugs to the package provider.
-_ACEOF
-ac_status=$?
-fi
-
-if test "$ac_init_help" = "recursive"; then
- # If there are subdirs, report their specific --help.
- for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
- test -d "$ac_dir" ||
- { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
- continue
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
- cd "$ac_dir" || { ac_status=$?; continue; }
- # Check for guested configure.
- if test -f "$ac_srcdir/configure.gnu"; then
- echo &&
- $SHELL "$ac_srcdir/configure.gnu" --help=recursive
- elif test -f "$ac_srcdir/configure"; then
- echo &&
- $SHELL "$ac_srcdir/configure" --help=recursive
- else
- $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
- fi || ac_status=$?
- cd "$ac_pwd" || { ac_status=$?; break; }
- done
-fi
-
-test -n "$ac_init_help" && exit $ac_status
-if $ac_init_version; then
- cat <<\_ACEOF
-configure
-generated by GNU Autoconf 2.64
-
-Copyright (C) 2009 Free Software Foundation, Inc.
-This configure script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it.
-_ACEOF
- exit
-fi
-
-## ------------------------ ##
-## Autoconf initialization. ##
-## ------------------------ ##
-
-# ac_fn_c_try_compile LINENO
-# --------------------------
-# Try to compile conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_compile ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext
- if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest.$ac_objext; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
-
-} # ac_fn_c_try_compile
-
-# ac_fn_c_try_cpp LINENO
-# ----------------------
-# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_cpp ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } >/dev/null && {
- test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
- test ! -s conftest.err
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
-
-} # ac_fn_c_try_cpp
-
-# ac_fn_c_try_link LINENO
-# -----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded.
-ac_fn_c_try_link ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- rm -f conftest.$ac_objext conftest$ac_exeext
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- grep -v '^ *+' conftest.err >conftest.er1
- cat conftest.er1 >&5
- mv -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && {
- test -z "$ac_c_werror_flag" ||
- test ! -s conftest.err
- } && test -s conftest$ac_exeext && {
- test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
- }; then :
- ac_retval=0
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=1
-fi
- # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
- # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
- # interfere with the next link command; also delete a directory that is
- # left behind by Apple's compiler. We do this before executing the actions.
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
-
-} # ac_fn_c_try_link
-
-# ac_fn_c_try_run LINENO
-# ----------------------
-# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
-# that executables *can* be run.
-ac_fn_c_try_run ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then :
- ac_retval=0
-else
- $as_echo "$as_me: program exited with status $ac_status" >&5
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
- ac_retval=$ac_status
-fi
- rm -rf conftest.dSYM conftest_ipa8_conftest.oo
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
- return $ac_retval
-
-} # ac_fn_c_try_run
-
-# ac_fn_c_check_func LINENO FUNC VAR
-# ----------------------------------
-# Tests whether FUNC exists, setting the cache variable VAR accordingly
-ac_fn_c_check_func ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
-$as_echo_n "checking for $2... " >&6; }
-if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-/* Define $2 to an innocuous variant, in case declares $2.
- For example, HP-UX 11i declares gettimeofday. */
-#define $2 innocuous_$2
-
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char $2 (); below.
- Prefer to if __STDC__ is defined, since
- exists even on freestanding compilers. */
-
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
-
-#undef $2
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $2 ();
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined __stub_$2 || defined __stub___$2
-choke me
-#endif
-
-int
-main ()
-{
-return $2 ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- eval "$3=yes"
-else
- eval "$3=no"
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-eval ac_res=\$$3
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
- eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
-
-} # ac_fn_c_check_func
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
-
- $ $0 $@
-
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
-
-/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
-/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
-/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
-/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
-/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
-
-_ASUNAME
-
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- $as_echo "PATH: $as_dir"
- done
-IFS=$as_save_IFS
-
-} >&5
-
-cat >&5 <<_ACEOF
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-_ACEOF
-
-
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
- for ac_arg
- do
- case $ac_arg in
- -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil)
- continue ;;
- *\'*)
- ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- case $ac_pass in
- 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
- 2)
- as_fn_append ac_configure_args1 " '$ac_arg'"
- if test $ac_must_keep_next = true; then
- ac_must_keep_next=false # Got value, back to normal.
- else
- case $ac_arg in
- *=* | --config-cache | -C | -disable-* | --disable-* \
- | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
- | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
- | -with-* | --with-* | -without-* | --without-* | --x)
- case "$ac_configure_args0 " in
- "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
- esac
- ;;
- -* ) ac_must_keep_next=true ;;
- esac
- fi
- as_fn_append ac_configure_args " '$ac_arg'"
- ;;
- esac
- done
-done
-{ ac_configure_args0=; unset ac_configure_args0;}
-{ ac_configure_args1=; unset ac_configure_args1;}
-
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log. We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
- # Save into config.log some information that might help in debugging.
- {
- echo
-
- cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
- echo
- # The following way of writing the cache mishandles newlines in values,
-(
- for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
- (set) 2>&1 |
- case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- sed -n \
- "s/'\''/'\''\\\\'\'''\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
- ;; #(
- *)
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-)
- echo
-
- cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_vars
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
-
- if test -n "$ac_subst_files"; then
- cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
- echo
- for ac_var in $ac_subst_files
- do
- eval ac_val=\$$ac_var
- case $ac_val in
- *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
- esac
- $as_echo "$ac_var='\''$ac_val'\''"
- done | sort
- echo
- fi
-
- if test -s confdefs.h; then
- cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
- echo
- cat confdefs.h
- echo
- fi
- test "$ac_signal" != 0 &&
- $as_echo "$as_me: caught signal $ac_signal"
- $as_echo "$as_me: exit $exit_status"
- } >&5
- rm -f core *.core core.conftest.* &&
- rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
- exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
- trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
-done
-ac_signal=0
-
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
-
-$as_echo "/* confdefs.h */" > confdefs.h
-
-# Predefined preprocessor variables.
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_URL "$PACKAGE_URL"
-_ACEOF
-
-
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
- ac_site_file1=$CONFIG_SITE
-elif test "x$prefix" != xNONE; then
- ac_site_file1=$prefix/share/config.site
- ac_site_file2=$prefix/etc/config.site
-else
- ac_site_file1=$ac_default_prefix/share/config.site
- ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
- test "x$ac_site_file" = xNONE && continue
- if test -r "$ac_site_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
- sed 's/^/| /' "$ac_site_file" >&5
- . "$ac_site_file"
- fi
-done
-
-if test -r "$cache_file"; then
- # Some versions of bash will fail to source /dev/null (special
- # files actually), so we avoid doing that.
- if test -f "$cache_file"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
- case $cache_file in
- [\\/]* | ?:[\\/]* ) . "$cache_file";;
- *) . "./$cache_file";;
- esac
- fi
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
- >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
- eval ac_old_set=\$ac_cv_env_${ac_var}_set
- eval ac_new_set=\$ac_env_${ac_var}_set
- eval ac_old_val=\$ac_cv_env_${ac_var}_value
- eval ac_new_val=\$ac_env_${ac_var}_value
- case $ac_old_set,$ac_new_set in
- set,)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,set)
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
- ac_cache_corrupted=: ;;
- ,);;
- *)
- if test "x$ac_old_val" != "x$ac_new_val"; then
- # differences in whitespace do not lead to failure.
- ac_old_val_w=`echo x $ac_old_val`
- ac_new_val_w=`echo x $ac_new_val`
- if test "$ac_old_val_w" != "$ac_new_val_w"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
- ac_cache_corrupted=:
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
- eval $ac_var=\$ac_old_val
- fi
- { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
-$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
-$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
- fi;;
- esac
- # Pass precious variables to config.status.
- if test "$ac_new_set" = set; then
- case $ac_new_val in
- *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
- *) ac_arg=$ac_var=$ac_new_val ;;
- esac
- case " $ac_configure_args " in
- *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
- *) as_fn_append ac_configure_args " '$ac_arg'" ;;
- esac
- fi
-done
-if $ac_cache_corrupted; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
- { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
- as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
-fi
-## -------------------- ##
-## Main body of script. ##
-## -------------------- ##
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-
-
-ac_config_headers="$ac_config_headers config.h"
-
-VERSION=0.4
-
-
-
-old_CFLAGS="$CFLAGS"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_CC"; then
- ac_ct_CC=$CC
- # Extract the first word of "gcc", so it can be a program name with args.
-set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="gcc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-else
- CC="$ac_cv_prog_CC"
-fi
-
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
-set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="${ac_tool_prefix}cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
-fi
-if test -z "$CC"; then
- # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
- ac_prog_rejected=no
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
- ac_prog_rejected=yes
- continue
- fi
- ac_cv_prog_CC="cc"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-if test $ac_prog_rejected = yes; then
- # We found a bogon in the path, so make sure we never use it.
- set dummy $ac_cv_prog_CC
- shift
- if test $# != 0; then
- # We chose a different compiler from the bogus one.
- # However, it has the same basename, so the bogon will be chosen
- # first if we set CC to just the basename; use the full file name.
- shift
- ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
- fi
-fi
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$CC"; then
- if test -n "$ac_tool_prefix"; then
- for ac_prog in cl.exe
- do
- # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$CC"; then
- ac_cv_prog_CC="$CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-CC=$ac_cv_prog_CC
-if test -n "$CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
-$as_echo "$CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$CC" && break
- done
-fi
-if test -z "$CC"; then
- ac_ct_CC=$CC
- for ac_prog in cl.exe
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$ac_ct_CC"; then
- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_ac_ct_CC="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
-$as_echo "$ac_ct_CC" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$ac_ct_CC" && break
-done
-
- if test "x$ac_ct_CC" = x; then
- CC=""
- else
- case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
- CC=$ac_ct_CC
- fi
-fi
-
-fi
-
-
-test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "no acceptable C compiler found in \$PATH
-See \`config.log' for more details." "$LINENO" 5; }
-
-# Provide some information about the compiler.
-$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-for ac_option in --version -v -V -qversion; do
- { { ac_try="$ac_compiler $ac_option >&5"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compiler $ac_option >&5") 2>conftest.err
- ac_status=$?
- if test -s conftest.err; then
- sed '10a\
-... rest of stderr output deleted ...
- 10q' conftest.err >conftest.er1
- cat conftest.er1 >&5
- rm -f conftest.er1 conftest.err
- fi
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }
-done
-
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
-# Try to create an executable without -o first, disregard a.out.
-# It will help us diagnose broken compilers, and finding out an intuition
-# of exeext.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
-$as_echo_n "checking for C compiler default output file name... " >&6; }
-ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-
-# The possible output files:
-ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
-
-ac_rmfiles=
-for ac_file in $ac_files
-do
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- * ) ac_rmfiles="$ac_rmfiles $ac_file";;
- esac
-done
-rm -f $ac_rmfiles
-
-if { { ac_try="$ac_link_default"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link_default") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
-# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
-# in a Makefile. We should not override ac_cv_exeext if it was cached,
-# so that the user can short-circuit this test for compilers unknown to
-# Autoconf.
-for ac_file in $ac_files ''
-do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
- ;;
- [ab].out )
- # We found the default executable, but exeext='' is most
- # certainly right.
- break;;
- *.* )
- if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
- then :; else
- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- fi
- # We set ac_cv_exeext here because the later test for it is not
- # safe: cross compilers may not add the suffix if given an `-o'
- # argument, so we may need to know it at that point already.
- # Even if this section looks crufty: it has the advantage of
- # actually working.
- break;;
- * )
- break;;
- esac
-done
-test "$ac_cv_exeext" = no && ac_cv_exeext=
-
-else
- ac_file=''
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
-$as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then :
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ as_fn_set_status 77
-as_fn_error "C compiler cannot create executables
-See \`config.log' for more details." "$LINENO" 5; }; }
-fi
-ac_exeext=$ac_cv_exeext
-
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
-$as_echo_n "checking whether the C compiler works... " >&6; }
-# If not cross compiling, check that we can run a simple program.
-if test "$cross_compiling" != yes; then
- if { ac_try='./$ac_file'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- cross_compiling=no
- else
- if test "$cross_compiling" = maybe; then
- cross_compiling=yes
- else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." "$LINENO" 5; }
- fi
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
-
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
-ac_clean_files=$ac_clean_files_save
-# Check that the compiler produces executables we can run. If not, either
-# the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
-$as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
-$as_echo "$cross_compiling" >&6; }
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
-$as_echo_n "checking for suffix of executables... " >&6; }
-if { { ac_try="$ac_link"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_link") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- # If both `conftest.exe' and `conftest' are `present' (well, observable)
-# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
-# work properly (i.e., refer to `conftest.exe'), while it won't with
-# `rm'.
-for ac_file in conftest.exe conftest conftest.*; do
- test -f "$ac_file" || continue
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
- *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
- break;;
- * ) break;;
- esac
-done
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." "$LINENO" 5; }
-fi
-rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
-$as_echo "$ac_cv_exeext" >&6; }
-
-rm -f conftest.$ac_ext
-EXEEXT=$ac_cv_exeext
-ac_exeext=$EXEEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
-$as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-rm -f conftest.o conftest.obj
-if { { ac_try="$ac_compile"
-case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_compile") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; then :
- for ac_file in conftest.o conftest.obj conftest.*; do
- test -f "$ac_file" || continue;
- case $ac_file in
- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
- *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
- break;;
- esac
-done
-else
- $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." "$LINENO" 5; }
-fi
-rm -f conftest.$ac_cv_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
-$as_echo "$ac_cv_objext" >&6; }
-OBJEXT=$ac_cv_objext
-ac_objext=$OBJEXT
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
-$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-#ifndef __GNUC__
- choke me
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_compiler_gnu=yes
-else
- ac_compiler_gnu=no
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_c_compiler_gnu=$ac_compiler_gnu
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
-$as_echo "$ac_cv_c_compiler_gnu" >&6; }
-if test $ac_compiler_gnu = yes; then
- GCC=yes
-else
- GCC=
-fi
-ac_test_CFLAGS=${CFLAGS+set}
-ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
-$as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_save_c_werror_flag=$ac_c_werror_flag
- ac_c_werror_flag=yes
- ac_cv_prog_cc_g=no
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-else
- CFLAGS=""
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- ac_c_werror_flag=$ac_save_c_werror_flag
- CFLAGS="-g"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_g=yes
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- ac_c_werror_flag=$ac_save_c_werror_flag
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
-$as_echo "$ac_cv_prog_cc_g" >&6; }
-if test "$ac_test_CFLAGS" = set; then
- CFLAGS=$ac_save_CFLAGS
-elif test $ac_cv_prog_cc_g = yes; then
- if test "$GCC" = yes; then
- CFLAGS="-g -O2"
- else
- CFLAGS="-g"
- fi
-else
- if test "$GCC" = yes; then
- CFLAGS="-O2"
- else
- CFLAGS=
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
-$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_cv_prog_cc_c89=no
-ac_save_CC=$CC
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-#include
-#include
-/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
-struct buf { int x; };
-FILE * (*rcsopen) (struct buf *, struct stat *, int);
-static char *e (p, i)
- char **p;
- int i;
-{
- return p[i];
-}
-static char *f (char * (*g) (char **, int), char **p, ...)
-{
- char *s;
- va_list v;
- va_start (v,p);
- s = g (p, va_arg (v,int));
- va_end (v);
- return s;
-}
-
-/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
- function prototypes and stuff, but not '\xHH' hex character constants.
- These don't provoke an error unfortunately, instead are silently treated
- as 'x'. The following induces an error, until -std is added to get
- proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
- array size at least. It's necessary to write '\x00'==0 to get something
- that's true only with -std. */
-int osf4_cc_array ['\x00' == 0 ? 1 : -1];
-
-/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
- inside strings and character constants. */
-#define FOO(x) 'x'
-int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
-
-int test (int i, double x);
-struct s1 {int (*f) (int a);};
-struct s2 {int (*f) (double a);};
-int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
-int argc;
-char **argv;
-int
-main ()
-{
-return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
- ;
- return 0;
-}
-_ACEOF
-for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
- -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
-do
- CC="$ac_save_CC $ac_arg"
- if ac_fn_c_try_compile "$LINENO"; then :
- ac_cv_prog_cc_c89=$ac_arg
-fi
-rm -f core conftest.err conftest.$ac_objext
- test "x$ac_cv_prog_cc_c89" != "xno" && break
-done
-rm -f conftest.$ac_ext
-CC=$ac_save_CC
-
-fi
-# AC_CACHE_VAL
-case "x$ac_cv_prog_cc_c89" in
- x)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
-$as_echo "none needed" >&6; } ;;
- xno)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
-$as_echo "unsupported" >&6; } ;;
- *)
- CC="$CC $ac_cv_prog_cc_c89"
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
-$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
-esac
-if test "x$ac_cv_prog_cc_c89" != xno; then :
-
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if test "${ac_cv_prog_CPP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- # Double quotes because CPP needs to be expanded
- for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
- do
- ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
- break
-fi
-
- done
- ac_cv_prog_CPP=$CPP
-
-fi
- CPP=$ac_cv_prog_CPP
-else
- ac_cv_prog_CPP=$CPP
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
-$as_echo "$CPP" >&6; }
-ac_preproc_ok=false
-for ac_c_preproc_warn_flag in '' yes
-do
- # Use a header file that comes with gcc, so configuring glibc
- # with a fresh cross-compiler works.
- # Prefer to if __STDC__ is defined, since
- # exists even on freestanding compilers.
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp. "Syntax error" is here to catch this case.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef __STDC__
-# include
-#else
-# include
-#endif
- Syntax error
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
-
-else
- # Broken: fails on valid input.
-continue
-fi
-rm -f conftest.err conftest.$ac_ext
-
- # OK, works on sane cases. Now check whether nonexistent headers
- # can be detected and how.
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-_ACEOF
-if ac_fn_c_try_cpp "$LINENO"; then :
- # Broken: success on invalid input.
-continue
-else
- # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then :
-
-else
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." "$LINENO" 5; }
-fi
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -z "$GREP"; then
- ac_path_GREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in grep ggrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
- # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'GREP' >> "conftest.nl"
- "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_GREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_GREP="$ac_path_GREP"
- ac_path_GREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_GREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_GREP"; then
- as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_GREP=$GREP
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
- then ac_cv_path_EGREP="$GREP -E"
- else
- if test -z "$EGREP"; then
- ac_path_EGREP_found=false
- # Loop through the user's path and test for each of PROGNAME-LIST
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_prog in egrep; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
- # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
- ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
- ac_count=0
- $as_echo_n 0123456789 >"conftest.in"
- while :
- do
- cat "conftest.in" "conftest.in" >"conftest.tmp"
- mv "conftest.tmp" "conftest.in"
- cp "conftest.in" "conftest.nl"
- $as_echo 'EGREP' >> "conftest.nl"
- "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
- diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
- as_fn_arith $ac_count + 1 && ac_count=$as_val
- if test $ac_count -gt ${ac_path_EGREP_max-0}; then
- # Best one so far, save it but keep looking for a better one
- ac_cv_path_EGREP="$ac_path_EGREP"
- ac_path_EGREP_max=$ac_count
- fi
- # 10*(2^10) chars as input seems more than enough
- test $ac_count -gt 10 && break
- done
- rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
- $ac_path_EGREP_found && break 3
- done
- done
- done
-IFS=$as_save_IFS
- if test -z "$ac_cv_path_EGREP"; then
- as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
- fi
-else
- ac_cv_path_EGREP=$EGREP
-fi
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
-
-if test $ac_cv_c_compiler_gnu = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC needs -traditional" >&5
-$as_echo_n "checking whether $CC needs -traditional... " >&6; }
-if test "${ac_cv_prog_gcc_traditional+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_pattern="Autoconf.*'x'"
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-Autoconf TIOCGETP
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "$ac_pattern" >/dev/null 2>&1; then :
- ac_cv_prog_gcc_traditional=yes
-else
- ac_cv_prog_gcc_traditional=no
-fi
-rm -f conftest*
-
-
- if test $ac_cv_prog_gcc_traditional = no; then
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-Autoconf TCGETA
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "$ac_pattern" >/dev/null 2>&1; then :
- ac_cv_prog_gcc_traditional=yes
-fi
-rm -f conftest*
-
- fi
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_gcc_traditional" >&5
-$as_echo "$ac_cv_prog_gcc_traditional" >&6; }
- if test $ac_cv_prog_gcc_traditional = yes; then
- CC="$CC -traditional"
- fi
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing strerror" >&5
-$as_echo_n "checking for library containing strerror... " >&6; }
-if test "${ac_cv_search_strerror+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_func_search_save_LIBS=$LIBS
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char strerror ();
-int
-main ()
-{
-return strerror ();
- ;
- return 0;
-}
-_ACEOF
-for ac_lib in '' cposix; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_strerror=$ac_res
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_strerror+set}" = set; then :
- break
-fi
-done
-if test "${ac_cv_search_strerror+set}" = set; then :
-
-else
- ac_cv_search_strerror=no
-fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_strerror" >&5
-$as_echo "$ac_cv_search_strerror" >&6; }
-ac_res=$ac_cv_search_strerror
-if test "$ac_res" != no; then :
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-
-fi
-
-
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-main(){exit(0);}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
-
-if test $CC != cc ; then
-echo "Your $CC failed - restarting with CC=cc" 1>&6
-
-echo "" 1>&6
-
-CC=cc
-export CC
-exec $0 $configure_args
-fi
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-main(){exit(0);}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- exec 5>&2
-eval $ac_link
-echo "CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;" 1>&6
-
-echo "$ac_compile" 1>&6
-
-as_fn_error "Can't run the compiler - sorry" "$LINENO" 5
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-main()
-{
- int __something_strange_();
- __something_strange_(0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- as_fn_error "Your compiler does not set the exit status - sorry" "$LINENO" 5
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_prog_AWK="$ac_prog"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
-$as_echo "$AWK" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- test -n "$AWK" && break
-done
-
-
-if test -f etc/toolcheck; then
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for buggy tools..." >&5
-$as_echo "$as_me: checking for buggy tools..." >&6;}
-sh etc/toolcheck 1>&6
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for System V..." >&5
-$as_echo "$as_me: checking for System V..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-#include
-int
-main ()
-{
-int x = SIGCHLD | FNDELAY;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
-
-else
- $as_echo "#define SYSV 1" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Solaris 2.x..." >&5
-$as_echo "$as_me: checking for Solaris 2.x..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#if defined(SVR4) && defined(sun)
- yes
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- LIBS="$LIBS -lsocket -lnsl -lkstat"
-fi
-rm -f conftest*
-
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select..." >&5
-$as_echo "$as_me: checking select..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-select(0, 0, 0, 0, 0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- LIBS="$LIBS -lnet -lnsl"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select with $LIBS..." >&5
-$as_echo "$as_me: checking select with $LIBS..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-select(0, 0, 0, 0, 0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- as_fn_error "!!! no select - no screen" "$LINENO" 5
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking select return value..." >&5
-$as_echo "$as_me: checking select return value..." >&6;}
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include
-#include
-#include
-
-char *nam = "/tmp/conftest$$";
-
-#ifdef NAMEDPIPE
-
-#ifndef O_NONBLOCK
-#define O_NONBLOCK O_NDELAY
-#endif
-#ifndef S_IFIFO
-#define S_IFIFO 0010000
-#endif
-
-
-main()
-{
-#ifdef FD_SET
- fd_set f;
-#else
- int f;
-#endif
-
-#ifdef __FreeBSD__
-/* From Andrew A. Chernov (ache@astral.msk.su):
- * opening RDWR fifo fails in BSD 4.4, but select return values are
- * right.
- */
- exit(0);
-#endif
- (void)alarm(5);
-#ifdef POSIX
- if (mkfifo(nam, 0777))
-#else
- if (mknod(nam, S_IFIFO|0777, 0))
-#endif
- exit(1);
- close(0);
- if (open(nam, O_RDWR | O_NONBLOCK))
- exit(1);
- if (write(0, "TEST", 4) == -1)
- exit(1);
-
-#else
-
-#include
-#include
-#include
-
-main()
-{
- int s1, s2, l;
- struct sockaddr_un a;
-#ifdef FD_SET
- fd_set f;
-#else
- int f;
-#endif
-
- (void)alarm(5);
- if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
- exit(1);
- a.sun_family = AF_UNIX;
- strcpy(a.sun_path, nam);
- (void) unlink(nam);
- if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1)
- exit(1);
- if (listen(s1, 2))
- exit(1);
- if (fork() == 0)
- {
- if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
- kill(getppid(), 3);
- (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2);
- if (write(s2, "HELLO", 5) == -1)
- kill(getppid(), 3);
- exit(0);
- }
- l = sizeof(a);
- close(0);
- if (accept(s1, (struct sockaddr *)&a, &l))
- exit(1);
-#endif
-
-
-#ifdef FD_SET
- FD_SET(0, &f);
-#else
- f = 1;
-#endif
- if (select(1, &f, 0, 0, 0) == -1)
- exit(1);
- if (select(1, &f, &f, 0, 0) != 2)
- exit(1);
- exit(0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- echo "- select is ok" 1>&6
-
-else
- echo "- select can't count" 1>&6
- $as_echo "#define SELECT_BROKEN 1" >>confdefs.h
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent..." >&5
-$as_echo "$as_me: checking for tgetent..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-tgetent((char *)0, (char *)0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- olibs="$LIBS"
-LIBS="-lcurses $olibs"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libcurses..." >&5
-$as_echo "$as_me: checking libcurses..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-
-#ifdef __hpux
-__sorry_hpux_libcurses_is_totally_broken_in_10_10();
-#else
-tgetent((char *)0, (char *)0);
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- LIBS="-ltermcap $olibs"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermcap..." >&5
-$as_echo "$as_me: checking libtermcap..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-tgetent((char *)0, (char *)0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- LIBS="-ltermlib $olibs"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libtermlib..." >&5
-$as_echo "$as_me: checking libtermlib..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-tgetent((char *)0, (char *)0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- LIBS="-lncurses $olibs"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking libncurses..." >&5
-$as_echo "$as_me: checking libncurses..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-tgetent((char *)0, (char *)0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- as_fn_error "!!! no tgetent - no screen" "$LINENO" 5
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-main()
-{
- exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1);
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- echo "- you use the termcap database" 1>&6
-
-else
- echo "- you use the terminfo database" 1>&6
- $as_echo "#define TERMINFO 1" >>confdefs.h
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking ospeed..." >&5
-$as_echo "$as_me: checking ospeed..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-extern short ospeed;
-int
-main ()
-{
-ospeed=5;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-
-else
- $as_echo "#define NEED_OSPEED 1" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for /dev/ptc..." >&5
-$as_echo "$as_me: checking for /dev/ptc..." >&6;}
-if test -r /dev/ptc; then
-$as_echo "#define HAVE_DEV_PTC 1" >>confdefs.h
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for SVR4 ptys..." >&5
-$as_echo "$as_me: checking for SVR4 ptys..." >&6;}
-sysvr4ptys=
-if test -c /dev/ptmx ; then
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-int
-main ()
-{
-ptsname(0);grantpt(0);unlockpt(0);
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- $as_echo "#define HAVE_SVR4_PTYS 1" >>confdefs.h
-
-sysvr4ptys=1
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-fi
-
-for ac_func in getpt
-do :
- ac_fn_c_check_func "$LINENO" "getpt" "ac_cv_func_getpt"
-if test "x$ac_cv_func_getpt" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_GETPT 1
-_ACEOF
-
-fi
-done
-
-
-if test -z "$sysvr4ptys"; then
-for ac_func in openpty
-do :
- ac_fn_c_check_func "$LINENO" "openpty" "ac_cv_func_openpty"
-if test "x$ac_cv_func_openpty" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_OPENPTY 1
-_ACEOF
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for openpty in -lutil" >&5
-$as_echo_n "checking for openpty in -lutil... " >&6; }
-if test "${ac_cv_lib_util_openpty+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lutil $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char openpty ();
-int
-main ()
-{
-return openpty ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_util_openpty=yes
-else
- ac_cv_lib_util_openpty=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_util_openpty" >&5
-$as_echo "$ac_cv_lib_util_openpty" >&6; }
-if test "x$ac_cv_lib_util_openpty" = x""yes; then :
- $as_echo "#define HAVE_OPENPTY 1" >>confdefs.h
- LIBS="$LIBS -lutil"
-fi
-
-fi
-done
-
-fi
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ptyranges..." >&5
-$as_echo "$as_me: checking for ptyranges..." >&6;}
-if test -d /dev/ptym ; then
-pdir='/dev/ptym'
-else
-pdir='/dev'
-fi
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#ifdef M_UNIX
- yes;
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "yes" >/dev/null 2>&1; then :
- ptys=`echo /dev/ptyp??`
-else
- ptys=`echo $pdir/pty??`
-fi
-rm -f conftest*
-
-if test "$ptys" != "$pdir/pty??" ; then
-p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'`
-p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'`
-cat >>confdefs.h <<_ACEOF
-#define PTYRANGE0 "$p0"
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PTYRANGE1 "$p1"
-_ACEOF
-
-fi
-
-
-# Check whether --with-pty-mode was given.
-if test "${with_pty_mode+set}" = set; then :
- withval=$with_pty_mode; ptymode="${withval}"
-fi
-
-
-# Check whether --with-pty-group was given.
-if test "${with_pty_group+set}" = set; then :
- withval=$with_pty_group; ptygrp="${withval}"
-fi
-
-test -n "$ptymode" || ptymode=0620
-if test -n "$ptygrp" ; then
-cat >>confdefs.h <<_ACEOF
-#define PTYMODE $ptymode
-_ACEOF
-
-cat >>confdefs.h <<_ACEOF
-#define PTYGROUP $ptygrp
-_ACEOF
-
-else
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking default tty permissions/group..." >&5
-$as_echo "$as_me: checking default tty permissions/group..." >&6;}
-rm -f conftest_grp
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include
-#include
-#include
-main()
-{
- struct stat sb;
- char *x,*ttyname();
- int om, m;
- FILE *fp;
-
- if (!(x = ttyname(0))) exit(1);
- if (stat(x, &sb)) exit(1);
- om = sb.st_mode;
- if (om & 002) exit(0);
- m = system("mesg y");
- if (m == -1 || m == 127) exit(1);
- if (stat(x, &sb)) exit(1);
- m = sb.st_mode;
- if (chmod(x, om)) exit(1);
- if (m & 002) exit(0);
- if (sb.st_gid == getgid()) exit(1);
- if (!(fp=fopen("conftest_grp", "w")))
- exit(1);
- fprintf(fp, "%d\n", sb.st_gid);
- fclose(fp);
- exit(0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
- if test -f conftest_grp; then
- ptygrp=`cat conftest_grp`
- echo "- pty mode: $ptymode, group: $ptygrp" 1>&6
-
- cat >>confdefs.h <<_ACEOF
-#define PTYMODE $ptymode
-_ACEOF
-
- cat >>confdefs.h <<_ACEOF
-#define PTYGROUP $ptygrp
-_ACEOF
-
- else
- echo "- ptys are world accessable" 1>&6
-
- fi
-
-else
-
- WRITEPATH=''
- XTERMPATH=''
- # Extract the first word of "write", so it can be a program name with args.
-set dummy write; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_WRITEPATH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $WRITEPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_WRITEPATH="$WRITEPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_WRITEPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-WRITEPATH=$ac_cv_path_WRITEPATH
-if test -n "$WRITEPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WRITEPATH" >&5
-$as_echo "$WRITEPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- # Extract the first word of "xterm", so it can be a program name with args.
-set dummy xterm; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_path_XTERMPATH+set}" = set; then :
- $as_echo_n "(cached) " >&6
-else
- case $XTERMPATH in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_XTERMPATH="$XTERMPATH" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
- ac_cv_path_XTERMPATH="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-XTERMPATH=$ac_cv_path_XTERMPATH
-if test -n "$XTERMPATH"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XTERMPATH" >&5
-$as_echo "$XTERMPATH" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- found=
- if test -n "$WRITEPATH$XTERMPATH"; then
- findfollow=
- lsfollow=
- found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null`
- if test -n "$found"; then
- findfollow=-follow
- lsfollow=L
- fi
- if test -n "$XTERMPATH"; then
- ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'`
- if test tty != "$ptygrpn"; then
- XTERMPATH=
- fi
- fi
- fi
- if test -n "$WRITEPATH$XTERMPATH"; then
- found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print`
- if test -n "$found"; then
- ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'`
- echo "- pty mode: $ptymode, group: $ptygrp" 1>&6
-
- cat >>confdefs.h <<_ACEOF
-#define PTYMODE $ptymode
-_ACEOF
-
- cat >>confdefs.h <<_ACEOF
-#define PTYGROUP $ptygrp
-_ACEOF
-
- else
- echo "- ptys are world accessable" 1>&6
-
- fi
- else
- echo "- can't determine - assume ptys are world accessable" 1>&6
-
- fi
-
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-rm -f conftest_grp
-fi
-
-if test -n "$posix" ; then
-
-echo "assuming posix signal definition" 1>&6
-
-$as_echo "#define SIGVOID 1" >>confdefs.h
-
-
-else
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers..." >&5
-$as_echo "$as_me: checking return type of signal handlers..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-#include
-#include
-#ifdef signal
-#undef signal
-#endif
-extern void (*signal ()) ();
-int
-main ()
-{
-int i;
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- $as_echo "#define SIGVOID 1" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking sigset..." >&5
-$as_echo "$as_me: checking sigset..." >&6;}
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include
-#include
-
-int
-main ()
-{
-
-#ifdef SIGVOID
-sigset(0, (void (*)())0);
-#else
-sigset(0, (int (*)())0);
-#endif
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- $as_echo "#define USESIGSET 1" >>confdefs.h
-
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking signal implementation..." >&5
-$as_echo "$as_me: checking signal implementation..." >&6;}
-if test "$cross_compiling" = yes; then :
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error "cannot run test program while cross compiling
-See \`config.log' for more details." "$LINENO" 5; }
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include
-#include
-
-#ifndef SIGCLD
-#define SIGCLD SIGCHLD
-#endif
-#ifdef USESIGSET
-#define signal sigset
-#endif
-
-int got;
-
-#ifdef SIGVOID
-void
-#endif
-hand()
-{
- got++;
-}
-
-main()
-{
- /* on hpux we use sigvec to get bsd signals */
-#ifdef __hpux
- (void)signal(SIGCLD, hand);
- kill(getpid(), SIGCLD);
- kill(getpid(), SIGCLD);
- if (got < 2)
- exit(1);
-#endif
- exit(0);
-}
-
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
-
-else
- $as_echo "#define SYSVSIGS 1" >>confdefs.h
-
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
-
-fi
-
-ac_config_files="$ac_config_files Makefile"
-
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems. If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
-
-_ACEOF
-
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
- for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
- eval ac_val=\$$ac_var
- case $ac_val in #(
- *${as_nl}*)
- case $ac_var in #(
- *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
- esac
- case $ac_var in #(
- _ | IFS | as_nl) ;; #(
- BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
- *) { eval $ac_var=; unset $ac_var;} ;;
- esac ;;
- esac
- done
-
- (set) 2>&1 |
- case $as_nl`(ac_space=' '; set) 2>&1` in #(
- *${as_nl}ac_space=\ *)
- # `set' does not quote correctly, so add quotes: double-quote
- # substitution turns \\\\ into \\, and sed turns \\ into \.
- sed -n \
- "s/'/'\\\\''/g;
- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
- ;; #(
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
- ;;
- esac |
- sort
-) |
- sed '
- /^ac_cv_env_/b end
- t clear
- :clear
- s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
- t end
- s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
- :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
- if test -w "$cache_file"; then
- test "x$cache_file" != "x/dev/null" &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
- cat confcache >$cache_file
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
- fi
-fi
-rm -f confcache
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-DEFS=-DHAVE_CONFIG_H
-
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
- # 1. Remove the extension, and $U if already installed.
- ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
- ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
- # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
- # will be set to the directory where LIBOBJS objects are built.
- as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
- as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
-
-LTLIBOBJS=$ac_ltlibobjs
-
-
-
-: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-as_write_fail=0
-cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
-## -------------------- ##
-## M4sh Initialization. ##
-## -------------------- ##
-
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
- emulate sh
- NULLCMD=:
- # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
- # is contrary to our usage. Disable this feature.
- alias -g '${1+"$@"}'='"$@"'
- setopt NO_GLOB_SUBST
-else
- case `(set -o) 2>/dev/null` in #(
- *posix*) :
- set -o posix ;; #(
- *) :
- ;;
-esac
-fi
-
-
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-# Prefer a ksh shell builtin over an external printf program on Solaris,
-# but without wasting forks for bash or zsh.
-if test -z "$BASH_VERSION$ZSH_VERSION" \
- && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='print -r --'
- as_echo_n='print -rn --'
-elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
- as_echo='printf %s\n'
- as_echo_n='printf %s'
-else
- if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
- as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
- as_echo_n='/usr/ucb/echo -n'
- else
- as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
- as_echo_n_body='eval
- arg=$1;
- case $arg in #(
- *"$as_nl"*)
- expr "X$arg" : "X\\(.*\\)$as_nl";
- arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
- esac;
- expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
- '
- export as_echo_n_body
- as_echo_n='sh -c $as_echo_n_body as_echo'
- fi
- export as_echo_body
- as_echo='sh -c $as_echo_body as_echo'
-fi
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
- PATH_SEPARATOR=:
- (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
- (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
- PATH_SEPARATOR=';'
- }
-fi
-
-
-# IFS
-# We need space, tab and new line, in precisely that order. Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" "" $as_nl"
-
-# Find who we are. Look in the path if we contain no directory separator.
-case $0 in #((
- *[\\/]* ) as_myself=$0 ;;
- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
- as_myself=$0
-fi
-if test ! -f "$as_myself"; then
- $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
- exit 1
-fi
-
-# Unset variables that we do not need and which cause bugs (e.g. in
-# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
-# suppresses any "Segmentation fault" message there. '((' could
-# trigger a bug in pdksh 5.2.14.
-for as_var in BASH_ENV ENV MAIL MAILPATH
-do eval test x\${$as_var+set} = xset \
- && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
-
-# CDPATH.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-
-# as_fn_error ERROR [LINENO LOG_FD]
-# ---------------------------------
-# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
-# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
-# script with status $?, using 1 if that was 0.
-as_fn_error ()
-{
- as_status=$?; test $as_status -eq 0 && as_status=1
- if test "$3"; then
- as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
- fi
- $as_echo "$as_me: error: $1" >&2
- as_fn_exit $as_status
-} # as_fn_error
-
-
-# as_fn_set_status STATUS
-# -----------------------
-# Set $? to STATUS, without forking.
-as_fn_set_status ()
-{
- return $1
-} # as_fn_set_status
-
-# as_fn_exit STATUS
-# -----------------
-# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
-as_fn_exit ()
-{
- set +e
- as_fn_set_status $1
- exit $1
-} # as_fn_exit
-
-# as_fn_unset VAR
-# ---------------
-# Portably unset VAR.
-as_fn_unset ()
-{
- { eval $1=; unset $1;}
-}
-as_unset=as_fn_unset
-# as_fn_append VAR VALUE
-# ----------------------
-# Append the text in VALUE to the end of the definition contained in VAR. Take
-# advantage of any shell optimizations that allow amortized linear growth over
-# repeated appends, instead of the typical quadratic growth present in naive
-# implementations.
-if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
- eval 'as_fn_append ()
- {
- eval $1+=\$2
- }'
-else
- as_fn_append ()
- {
- eval $1=\$$1\$2
- }
-fi # as_fn_append
-
-# as_fn_arith ARG...
-# ------------------
-# Perform arithmetic evaluation on the ARGs, and store the result in the
-# global $as_val. Take advantage of shells that can avoid forks. The arguments
-# must be portable across $(()) and expr.
-if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
- eval 'as_fn_arith ()
- {
- as_val=$(( $* ))
- }'
-else
- as_fn_arith ()
- {
- as_val=`expr "$@" || test $? -eq 1`
- }
-fi # as_fn_arith
-
-
-if expr a : '\(a\)' >/dev/null 2>&1 &&
- test "X`expr 00001 : '.*\(...\)'`" = X001; then
- as_expr=expr
-else
- as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
- as_basename=basename
-else
- as_basename=false
-fi
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
- as_dirname=dirname
-else
- as_dirname=false
-fi
-
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
- X"$0" : 'X\(//\)$' \| \
- X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
- sed '/^.*\/\([^/][^/]*\)\/*$/{
- s//\1/
- q
- }
- /^X\/\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\/\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
-
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in #(((((
--n*)
- case `echo 'xy\c'` in
- *c*) ECHO_T=' ';; # ECHO_T is single tab character.
- xy) ECHO_C='\c';;
- *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
- ECHO_T=' ';;
- esac;;
-*)
- ECHO_N='-n';;
-esac
-
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
- rm -f conf$$.dir/conf$$.file
-else
- rm -f conf$$.dir
- mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
- if ln -s conf$$.file conf$$ 2>/dev/null; then
- as_ln_s='ln -s'
- # ... but there are two gotchas:
- # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
- # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
- ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
- elif ln conf$$.file conf$$ 2>/dev/null; then
- as_ln_s=ln
- else
- as_ln_s='cp -p'
- fi
-else
- as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
-
-
-# as_fn_mkdir_p
-# -------------
-# Create "$as_dir" as a directory, including parents if necessary.
-as_fn_mkdir_p ()
-{
-
- case $as_dir in #(
- -*) as_dir=./$as_dir;;
- esac
- test -d "$as_dir" || eval $as_mkdir_p || {
- as_dirs=
- while :; do
- case $as_dir in #(
- *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
- *) as_qdir=$as_dir;;
- esac
- as_dirs="'$as_qdir' $as_dirs"
- as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$as_dir" : 'X\(//\)[^/]' \| \
- X"$as_dir" : 'X\(//\)$' \| \
- X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- test -d "$as_dir" && break
- done
- test -z "$as_dirs" || eval "mkdir $as_dirs"
- } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
-
-
-} # as_fn_mkdir_p
-if mkdir -p . 2>/dev/null; then
- as_mkdir_p='mkdir -p "$as_dir"'
-else
- test -d ./-p && rmdir ./-p
- as_mkdir_p=false
-fi
-
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-exec 6>&1
-## ----------------------------------- ##
-## Main body of $CONFIG_STATUS script. ##
-## ----------------------------------- ##
-_ASEOF
-test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# Save the log message, to keep $0 and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by $as_me, which was
-generated by GNU Autoconf 2.64. Invocation command line was
-
- CONFIG_FILES = $CONFIG_FILES
- CONFIG_HEADERS = $CONFIG_HEADERS
- CONFIG_LINKS = $CONFIG_LINKS
- CONFIG_COMMANDS = $CONFIG_COMMANDS
- $ $0 $@
-
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
-
-_ACEOF
-
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
-
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
-
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="$ac_config_files"
-config_headers="$ac_config_headers"
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files and other configuration actions
-from templates according to the current configuration. Unless the files
-and actions are specified as TAGs, all are instantiated by default.
-
-Usage: $0 [OPTION]... [TAG]...
-
- -h, --help print this help, then exit
- -V, --version print version number and configuration settings, then exit
- -q, --quiet, --silent
- do not print progress messages
- -d, --debug don't remove temporary files
- --recheck update $as_me by reconfiguring in the same conditions
- --file=FILE[:TEMPLATE]
- instantiate the configuration file FILE
- --header=FILE[:TEMPLATE]
- instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to the package provider."
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_version="\\
-config.status
-configured by $0, generated by GNU Autoconf 2.64,
- with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
-
-Copyright (C) 2009 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
- case $1 in
- --*=*)
- ac_option=`expr "X$1" : 'X\([^=]*\)='`
- ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
- ac_shift=:
- ;;
- *)
- ac_option=$1
- ac_optarg=$2
- ac_shift=shift
- ;;
- esac
-
- case $ac_option in
- # Handling of the options.
- -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
- ac_cs_recheck=: ;;
- --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
- $as_echo "$ac_cs_version"; exit ;;
- --debug | --debu | --deb | --de | --d | -d )
- debug=: ;;
- --file | --fil | --fi | --f )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_FILES " '$ac_optarg'"
- ac_need_defaults=false;;
- --header | --heade | --head | --hea )
- $ac_shift
- case $ac_optarg in
- *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
- esac
- as_fn_append CONFIG_HEADERS " '$ac_optarg'"
- ac_need_defaults=false;;
- --he | --h)
- # Conflict between --help and --header
- as_fn_error "ambiguous option: \`$1'
-Try \`$0 --help' for more information.";;
- --help | --hel | -h )
- $as_echo "$ac_cs_usage"; exit ;;
- -q | -quiet | --quiet | --quie | --qui | --qu | --q \
- | -silent | --silent | --silen | --sile | --sil | --si | --s)
- ac_cs_silent=: ;;
-
- # This is an error.
- -*) as_fn_error "unrecognized option: \`$1'
-Try \`$0 --help' for more information." ;;
-
- *) as_fn_append ac_config_targets " $1"
- ac_need_defaults=false ;;
-
- esac
- shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
- exec 6>/dev/null
- ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
- shift
- \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
- CONFIG_SHELL='$SHELL'
- export CONFIG_SHELL
- exec "\$@"
-fi
-
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
- echo
- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
- $as_echo "$ac_log"
-} >&5
-
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
- case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
- "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-
- *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
- esac
-done
-
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used. Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
- test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
- test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Have a temporary directory for convenience. Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
- tmp=
- trap 'exit_status=$?
- { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
- trap 'as_fn_exit 1' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
- tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
- test -n "$tmp" && test -d "$tmp"
-} ||
-{
- tmp=./conf$$-$RANDOM
- (umask 077 && mkdir "$tmp")
-} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
-
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
-
-
-ac_cr=`echo X | tr X '\015'`
-# On cygwin, bash can eat \r inside `` if the user requested igncr.
-# But we know of no other shell where ac_cr would be empty at this
-# point, so we can use a bashism as a fallback.
-if test "x$ac_cr" = x; then
- eval ac_cr=\$\'\\r\'
-fi
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
- ac_cs_awk_cr='\r'
-else
- ac_cs_awk_cr=$ac_cr
-fi
-
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
-_ACEOF
-
-
-{
- echo "cat >conf$$subs.awk <<_ACEOF" &&
- echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
- echo "_ACEOF"
-} >conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
- . ./conf$$subs.sh ||
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
-
- ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
- if test $ac_delim_n = $ac_delim_num; then
- break
- elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-rm -f conf$$subs.sh
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\).*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\).*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' >$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
- for (key in S) S_is_set[key] = 1
- FS = ""
-
-}
-{
- line = $ 0
- nfields = split(line, field, "@")
- substed = 0
- len = length(field[1])
- for (i = 2; i < nfields; i++) {
- key = field[i]
- keylen = length(key)
- if (S_is_set[key]) {
- value = S[key]
- line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
- len += length(value) + length(field[++i])
- substed = 1
- } else
- len += 1 + keylen
- }
-
- print line
-}
-
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
- sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
- cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
- || as_fn_error "could not setup config files machinery" "$LINENO" 5
-_ACEOF
-
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[ ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[ ]*$//
-}'
-fi
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
-
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
-
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
-
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
- ac_t=`sed -n "/$ac_delim/p" confdefs.h`
- if test -z "$ac_t"; then
- break
- elif $ac_last_try; then
- as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
- else
- ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
- fi
-done
-
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any. Preserve backslash
-# newline sequences.
-
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[ ]*#[ ]*define[ ][ ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' >$CONFIG_STATUS || ac_write_fail=1
-
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- for (key in D) D_is_set[key] = 1
- FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
- line = \$ 0
- split(line, arg, " ")
- if (arg[1] == "#") {
- defundef = arg[2]
- mac1 = arg[3]
- } else {
- defundef = substr(arg[1], 2)
- mac1 = arg[2]
- }
- split(mac1, mac2, "(") #)
- macro = mac2[1]
- prefix = substr(line, 1, index(line, defundef) - 1)
- if (D_is_set[macro]) {
- # Preserve the white space surrounding the "#".
- print prefix "define", macro P[macro] D[macro]
- next
- } else {
- # Replace #undef with comments. This is necessary, for example,
- # in the case of _POSIX_SOURCE, which is predefined and required
- # on some systems where configure will not decide to define it.
- if (defundef == "undef") {
- print "/*", prefix defundef, macro, "*/"
- next
- }
- }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
- as_fn_error "could not setup config headers machinery" "$LINENO" 5
-fi # test -n "$CONFIG_HEADERS"
-
-
-eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS "
-shift
-for ac_tag
-do
- case $ac_tag in
- :[FHLC]) ac_mode=$ac_tag; continue;;
- esac
- case $ac_mode$ac_tag in
- :[FHL]*:*);;
- :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
- :[FH]-) ac_tag=-:-;;
- :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
- esac
- ac_save_IFS=$IFS
- IFS=:
- set x $ac_tag
- IFS=$ac_save_IFS
- shift
- ac_file=$1
- shift
-
- case $ac_mode in
- :L) ac_source=$1;;
- :[FH])
- ac_file_inputs=
- for ac_f
- do
- case $ac_f in
- -) ac_f="$tmp/stdin";;
- *) # Look for the file first in the build tree, then in the source tree
- # (if the path is not absolute). The absolute path cannot be DOS-style,
- # because $ac_f cannot contain `:'.
- test -f "$ac_f" ||
- case $ac_f in
- [\\/$]*) false;;
- *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
- esac ||
- as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
- esac
- case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
- as_fn_append ac_file_inputs " '$ac_f'"
- done
-
- # Let's still pretend it is `configure' which instantiates (i.e., don't
- # use $as_me), people would be surprised to read:
- # /* config.h. Generated by config.status. */
- configure_input='Generated from '`
- $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
- `' by configure.'
- if test x"$ac_file" != x-; then
- configure_input="$ac_file. $configure_input"
- { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
- fi
- # Neutralize special characters interpreted by sed in replacement strings.
- case $configure_input in #(
- *\&* | *\|* | *\\* )
- ac_sed_conf_input=`$as_echo "$configure_input" |
- sed 's/[\\\\&|]/\\\\&/g'`;; #(
- *) ac_sed_conf_input=$configure_input;;
- esac
-
- case $ac_tag in
- *:-:* | *:-) cat >"$tmp/stdin" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
- esac
- ;;
- esac
-
- ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$ac_file" : 'X\(//\)[^/]' \| \
- X"$ac_file" : 'X\(//\)$' \| \
- X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'`
- as_dir="$ac_dir"; as_fn_mkdir_p
- ac_builddir=.
-
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
- ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
- # A ".." for each directory in $ac_dir_suffix.
- ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
- case $ac_top_builddir_sub in
- "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
- *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
- esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
-
-case $srcdir in
- .) # We are building in place.
- ac_srcdir=.
- ac_top_srcdir=$ac_top_builddir_sub
- ac_abs_top_srcdir=$ac_pwd ;;
- [\\/]* | ?:[\\/]* ) # Absolute name.
- ac_srcdir=$srcdir$ac_dir_suffix;
- ac_top_srcdir=$srcdir
- ac_abs_top_srcdir=$srcdir ;;
- *) # Relative name.
- ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
- ac_top_srcdir=$ac_top_build_prefix$srcdir
- ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
-
-
- case $ac_mode in
- :F)
- #
- # CONFIG_FILE
- #
-
-_ACEOF
-
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
-ac_sed_dataroot='
-/datarootdir/ {
- p
- q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
- ac_datarootdir_hack='
- s&@datadir@&$datadir&g
- s&@docdir@&$docdir&g
- s&@infodir@&$infodir&g
- s&@localedir@&$localedir&g
- s&@mandir@&$mandir&g
- s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
-
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
-
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
- { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
- { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined. Please make sure it is defined." >&2;}
-
- rm -f "$tmp/stdin"
- case $ac_file in
- -) cat "$tmp/out" && rm -f "$tmp/out";;
- *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
- esac \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
- ;;
- :H)
- #
- # CONFIG_HEADER
- #
- if test x"$ac_file" != x-; then
- {
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
- } >"$tmp/config.h" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
- if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
- else
- rm -f "$ac_file"
- mv "$tmp/config.h" "$ac_file" \
- || as_fn_error "could not create $ac_file" "$LINENO" 5
- fi
- else
- $as_echo "/* $configure_input */" \
- && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
- || as_fn_error "could not create -" "$LINENO" 5
- fi
- ;;
-
-
- esac
-
-done # for ac_tag
-
-
-as_fn_exit 0
-_ACEOF
-ac_clean_files=$ac_clean_files_save
-
-test $ac_write_fail = 0 ||
- as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
-
-
-# configure is writing to config.log, and then calls config.status.
-# config.status does its own redirection, appending to config.log.
-# Unfortunately, on DOS this fails, as config.log is still kept open
-# by configure, so config.status won't be able to write to it; its
-# output is simply discarded. So we exec the FD to /dev/null,
-# effectively closing config.log, so it can be properly (re)opened and
-# appended to by config.status. When coming back to configure, we
-# need to make the FD available again.
-if test "$no_create" != yes; then
- ac_cs_success=:
- ac_config_status_args=
- test "$silent" = yes &&
- ac_config_status_args="$ac_config_status_args --quiet"
- exec 5>/dev/null
- $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
- exec 5>>config.log
- # Use ||, not &&, to avoid exiting from the if with $? = 1, which
- # would make configure fail if this is the last instruction.
- $ac_cs_success || as_fn_exit $?
-fi
-if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
-$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
-fi
-
configure
Property changes :
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (revision 816)
+++ Makefile.in (nonexistent)
@@ -1,176 +0,0 @@
-#
-# Makefile template for rlfe
-#
-# See machine dependant config.h for more configuration options.
-#
-
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-DESTDIR =
-
-# Where to install screen.
-
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-
-# don't forget to change mandir and infodir in doc/Makefile.
-bindir = $(exec_prefix)/bin
-
-VERSION = @VERSION@
-SCREEN = screen-$(VERSION)
-
-CC = @CC@
-CFLAGS = @CFLAGS@
-CPPFLAGS = @CPPFLAGS@
-#LDFLAGS = -L$(READLINE_DIR)
-LDFLAGS = @LDFLAGS@
-LIBS = -lreadline -lhistory -lncurses
-
-CPP=@CPP@
-CPP_DEPEND=$(CC) -MM
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-AWK = @AWK@
-
-OPTIONS=
-#OPTIONS= -DDEBUG
-
-SHELL=/bin/sh
-
-CFILES= rlfe.c pty.c
-HFILES= extern.h os.h screen.h
-EXTRA_DIST=configure.in configure Makefile.in config.h.in ChangeLog README
-OFILES= rlfe.o pty.o
-
-all: rlfe
-
-rlfe: $(OFILES)
- $(CC) $(LDFLAGS) -o $@ $(OFILES) $(LIBS)
-
-rlfe-$(VERSION).tar.gz:
- tar czf $@ $(CFILES) $(HFILES) $(EXTRA_DIST)
-
-.c.o:
- $(CC) -c -I. -I$(srcdir) $(M_CFLAGS) $(DEFS) $(OPTIONS) $(CFLAGS) $<
-
-install_bin: .version screen
- -if [ -f $(DESTDIR)$(bindir)/$(SCREEN) ] && [ ! -f $(DESTDIR)$(bindir)/$(SCREEN).old ]; \
- then mv $(DESTDIR)$(bindir)/$(SCREEN) $(DESTDIR)$(bindir)/$(SCREEN).old; fi
- $(INSTALL_PROGRAM) screen $(DESTDIR)$(bindir)/$(SCREEN)
- -chown root $(DESTDIR)$(bindir)/$(SCREEN) && chmod 4755 $(DESTDIR)$(bindir)/$(SCREEN)
-# This doesn't work if $(bindir)/screen is a symlink
- -if [ -f $(DESTDIR)$(bindir)/screen ] && [ ! -f $(DESTDIR)$(bindir)/screen.old ]; then mv $(DESTDIR)$(bindir)/screen $(DESTDIR)$(bindir)/screen.old; fi
- rm -f $(DESTDIR)$(bindir)/screen
- (cd $(DESTDIR)$(bindir) && ln -sf $(SCREEN) screen)
- cp $(srcdir)/utf8encodings/?? $(DESTDIR)$(SCREENENCODINGS)
-
-
-uninstall: .version
- rm -f $(DESTDIR)$(bindir)/$(SCREEN)
- rm -f $(DESTDIR)$(bindir)/screen
- -mv $(DESTDIR)$(bindir)/screen.old $(DESTDIR)$(bindir)/screen
- rm -f $(DESTDIR)$(ETCSCREENRC)
- cd doc; $(MAKE) uninstall
-
-shadow:
- mkdir shadow;
- cd shadow; ln -s ../*.[ch] ../*.in ../*.sh ../configure ../doc ../terminfo ../etc .
- rm -f shadow/term.h shadow/tty.c shadow/comm.h shadow/osdef.h
- echo "install all Makefiles and config:" > shadow/Makefile
- echo " rm -f config.cache" >> shadow/Makefile
- echo " sh ./configure" >> shadow/Makefile
-
-term.h: term.c term.sh
- AWK=$(AWK) srcdir=$(srcdir) sh $(srcdir)/term.sh
-
-kmapdef.c: term.h
-
-tty.c: tty.sh
- sh $(srcdir)/tty.sh tty.c
-
-mostlyclean:
- rm -f $(OFILES) rlfe *.o
-
-clean celan: mostlyclean
- rm -f tty.c term.h comm.h osdef.h kmapdef.c core
-
-# Delete all files from the current directory that are created by
-# configuring or building the program.
-# building of term.h/comm.h requires awk. Keep it in the distribution
-# we keep config.h, as this file knows where 'make dist' finds the ETCSCREENRC.
-#distclean: mostlyclean
-# rm -f $(SCREEN).tar $(SCREEN).tar.gz
-# rm -f config.status Makefile
-# rm -f osdef.h doc/Makefile
-
-maintainer-clean:
- @echo "This command is not even intended for maintainers to use;"
- @echo "it deletes files that may require special tools to rebuild."
-
-
-# Delete everything from the current directory that can be
-# reconstructed with this Makefile.
-realclean: .version mostlyclean
- rm -f $(SCREEN).tar $(SCREEN).tar.gz
- rm -f config.status Makefile doc/Makefile
- rm -f tty.c term.h comm.h osdef.h kmapdef.c
- rm -f config.h
- echo "install all Makefiles and config:" > Makefile
- echo " sh ./configure" >> Makefile
-
-tags TAGS: $(CFILES)
- -ctags *.sh $(CFILES) *.h
- -ctags -e *.sh $(CFILES) *.h
-
-dist: .version $(SCREEN).tar.gz
-
-
-# Perform self-tests (if any).
-check:
-
-config:
- rm -f config.cache
- sh ./configure
-
-
-###############################################################################
-
-.version:
- @rev=`sed < $(srcdir)/patchlevel.h -n -e '/#define REV/s/#define REV *//p'`; \
- vers=`sed < $(srcdir)/patchlevel.h -n -e '/#define VERS/s/#define VERS *//p'`; \
- pat=`sed < $(srcdir)/patchlevel.h -n -e '/#define PATCHLEVEL/s/#define PATCHLEVEL *//p'`; \
- if [ "$${rev}.$${vers}.$${pat}" != "$(VERSION)" ]; then \
- echo "This distribution is screen-$${rev}.$${vers}.$${pat}, but"; \
- echo "the Makefile is from $(VERSION). Please update!"; exit 1; fi
-
-###############################################################################
-
-mdepend: $(CFILES) term.h
- @rm -f DEPEND ; \
- for i in ${CFILES} ; do \
- echo "$$i" ; \
- echo `echo "$$i" | sed -e 's/.c$$/.o/'`": $$i" `\
- cc -E $$i |\
- grep '^# .*"\./.*\.h"' |\
- (sort -t'"' -u -k 2,2 2>/dev/null || sort -t'"' -u +1 -2) |\
- sed -e 's/.*"\.\/\(.*\)".*/\1/'\
- ` >> DEPEND ; \
- done
-
-depend: depend.in
- ./config.status || ./configure
-
-depend.in: $(CFILES) term.h
- cp Makefile.in Makefile.in~
- sed -e '/\#\#\# Dependencies/q' < Makefile.in > tmp_make
- for i in $(CFILES); do echo $$i; $(CPP_DEPEND) $$i >> tmp_make; done
- mv tmp_make Makefile.in
-
-###############################################################################
-
-### Dependencies:
-pty.o: pty.c config.h
Index: screen.h
===================================================================
--- screen.h (revision 816)
+++ screen.h (nonexistent)
@@ -1,2 +0,0 @@
-/* Dummy header to avoid modifying pty.c */
-#include "os.h"
screen.h
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: configure.in
===================================================================
--- configure.in (revision 816)
+++ configure.in (nonexistent)
@@ -1,440 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-
-m4_include([../../../config/override.m4])
-
-AC_INIT(rlfe.c)
-AC_CONFIG_HEADER(config.h)
-VERSION=0.4
-AC_SUBST(VERSION)
-
-dnl
-dnl Define some useful macros
-dnl
-AC_DEFUN([AC_PROGRAM_SOURCE],
-[AC_REQUIRE([AC_PROG_CPP])AC_PROVIDE([$0])cat > conftest.c <&5 | sed -e '1,/_CUT_HERE_/d' -e 's/ //g' > conftest.out"
-. ./conftest.out
-rm -f conftest*
-])dnl
-dnl
-define(AC_NOTE,
-[echo "$1" 1>&AC_FD_MSG
-])dnl
-
-old_CFLAGS="$CFLAGS"
-AC_PROG_CC
-AC_PROG_CPP
-AC_PROG_GCC_TRADITIONAL
-AC_ISC_POSIX
-
-AC_TRY_RUN(main(){exit(0);},,[
-if test $CC != cc ; then
-AC_NOTE(Your $CC failed - restarting with CC=cc)
-AC_NOTE()
-CC=cc
-export CC
-exec $0 $configure_args
-fi
-])
-
-AC_TRY_RUN(main(){exit(0);},,
-exec 5>&2
-eval $ac_link
-AC_NOTE(CC=$CC; CFLAGS=$CFLAGS; LIBS=$LIBS;)
-AC_NOTE($ac_compile)
-AC_MSG_ERROR(Can't run the compiler - sorry))
-
-AC_TRY_RUN([
-main()
-{
- int __something_strange_();
- __something_strange_(0);
-}
-],AC_MSG_ERROR(Your compiler does not set the exit status - sorry))
-
-AC_PROG_AWK
-
-if test -f etc/toolcheck; then
-AC_CHECKING(for buggy tools)
-sh etc/toolcheck 1>&AC_FD_MSG
-fi
-
-dnl
-dnl **** special unix variants ****
-dnl
-
-AC_CHECKING(for System V)
-AC_TRY_COMPILE(
-[#include
-#include
-#include ], [int x = SIGCHLD | FNDELAY;], , AC_DEFINE(SYSV))
-
-AC_CHECKING(for Solaris 2.x)
-AC_EGREP_CPP(yes,
-[#if defined(SVR4) && defined(sun)
- yes
-#endif
-], LIBS="$LIBS -lsocket -lnsl -lkstat")
-
-dnl
-dnl **** select() ****
-dnl
-
-AC_CHECKING(select)
-AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],,
-LIBS="$LIBS -lnet -lnsl"
-AC_CHECKING(select with $LIBS)
-AC_TRY_LINK(,[select(0, 0, 0, 0, 0);],,
-AC_MSG_ERROR(!!! no select - no screen))
-)
-dnl
-dnl **** check the select implementation ****
-dnl
-
-AC_CHECKING(select return value)
-AC_TRY_RUN([
-#include
-#include
-#include
-
-char *nam = "/tmp/conftest$$";
-
-#ifdef NAMEDPIPE
-
-#ifndef O_NONBLOCK
-#define O_NONBLOCK O_NDELAY
-#endif
-#ifndef S_IFIFO
-#define S_IFIFO 0010000
-#endif
-
-
-main()
-{
-#ifdef FD_SET
- fd_set f;
-#else
- int f;
-#endif
-
-#ifdef __FreeBSD__
-/* From Andrew A. Chernov (ache@astral.msk.su):
- * opening RDWR fifo fails in BSD 4.4, but select return values are
- * right.
- */
- exit(0);
-#endif
- (void)alarm(5);
-#ifdef POSIX
- if (mkfifo(nam, 0777))
-#else
- if (mknod(nam, S_IFIFO|0777, 0))
-#endif
- exit(1);
- close(0);
- if (open(nam, O_RDWR | O_NONBLOCK))
- exit(1);
- if (write(0, "TEST", 4) == -1)
- exit(1);
-
-#else
-
-#include
-#include
-#include
-
-main()
-{
- int s1, s2, l;
- struct sockaddr_un a;
-#ifdef FD_SET
- fd_set f;
-#else
- int f;
-#endif
-
- (void)alarm(5);
- if ((s1 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
- exit(1);
- a.sun_family = AF_UNIX;
- strcpy(a.sun_path, nam);
- (void) unlink(nam);
- if (bind(s1, (struct sockaddr *) &a, strlen(nam)+2) == -1)
- exit(1);
- if (listen(s1, 2))
- exit(1);
- if (fork() == 0)
- {
- if ((s2 = socket(AF_UNIX, SOCK_STREAM, 0)) == -1)
- kill(getppid(), 3);
- (void)connect(s2, (struct sockaddr *)&a, strlen(nam) + 2);
- if (write(s2, "HELLO", 5) == -1)
- kill(getppid(), 3);
- exit(0);
- }
- l = sizeof(a);
- close(0);
- if (accept(s1, (struct sockaddr *)&a, &l))
- exit(1);
-#endif
-
-
-#ifdef FD_SET
- FD_SET(0, &f);
-#else
- f = 1;
-#endif
- if (select(1, &f, 0, 0, 0) == -1)
- exit(1);
- if (select(1, &f, &f, 0, 0) != 2)
- exit(1);
- exit(0);
-}
-],AC_NOTE(- select is ok),
-AC_NOTE(- select can't count) AC_DEFINE(SELECT_BROKEN))
-
-dnl
-dnl **** termcap or terminfo ****
-dnl
-AC_CHECKING(for tgetent)
-AC_TRY_LINK(,tgetent((char *)0, (char *)0);,,
-olibs="$LIBS"
-LIBS="-lcurses $olibs"
-AC_CHECKING(libcurses)
-AC_TRY_LINK(,[
-#ifdef __hpux
-__sorry_hpux_libcurses_is_totally_broken_in_10_10();
-#else
-tgetent((char *)0, (char *)0);
-#endif
-],,
-LIBS="-ltermcap $olibs"
-AC_CHECKING(libtermcap)
-AC_TRY_LINK(,tgetent((char *)0, (char *)0);,,
-LIBS="-ltermlib $olibs"
-AC_CHECKING(libtermlib)
-AC_TRY_LINK(,tgetent((char *)0, (char *)0);,,
-LIBS="-lncurses $olibs"
-AC_CHECKING(libncurses)
-AC_TRY_LINK(,tgetent((char *)0, (char *)0);,,
-AC_MSG_ERROR(!!! no tgetent - no screen))))))
-
-AC_TRY_RUN([
-main()
-{
- exit(strcmp(tgoto("%p1%d", 0, 1), "1") ? 0 : 1);
-}], AC_NOTE(- you use the termcap database),
-AC_NOTE(- you use the terminfo database) AC_DEFINE(TERMINFO))
-AC_CHECKING(ospeed)
-AC_TRY_LINK(extern short ospeed;,ospeed=5;,,AC_DEFINE(NEED_OSPEED))
-
-dnl
-dnl **** PTY specific things ****
-dnl
-AC_CHECKING(for /dev/ptc)
-if test -r /dev/ptc; then
-AC_DEFINE(HAVE_DEV_PTC)
-fi
-
-AC_CHECKING(for SVR4 ptys)
-sysvr4ptys=
-if test -c /dev/ptmx ; then
-AC_TRY_LINK([],[ptsname(0);grantpt(0);unlockpt(0);],[AC_DEFINE(HAVE_SVR4_PTYS)
-sysvr4ptys=1])
-fi
-
-AC_CHECK_FUNCS(getpt)
-
-dnl check for openpty()
-if test -z "$sysvr4ptys"; then
-AC_CHECK_FUNCS(openpty,,
-[AC_CHECK_LIB(util,openpty, [AC_DEFINE(HAVE_OPENPTY)] [LIBS="$LIBS -lutil"])])
-fi
-
-AC_CHECKING(for ptyranges)
-if test -d /dev/ptym ; then
-pdir='/dev/ptym'
-else
-pdir='/dev'
-fi
-dnl SCO uses ptyp%d
-AC_EGREP_CPP(yes,
-[#ifdef M_UNIX
- yes;
-#endif
-], ptys=`echo /dev/ptyp??`, ptys=`echo $pdir/pty??`)
-dnl if test -c /dev/ptyp19; then
-dnl ptys=`echo /dev/ptyp??`
-dnl else
-dnl ptys=`echo $pdir/pty??`
-dnl fi
-if test "$ptys" != "$pdir/pty??" ; then
-p0=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\).$/\1/g' | sort -u | tr -d '\012'`
-p1=`echo $ptys | tr ' ' '\012' | sed -e 's/^.*\(.\)$/\1/g' | sort -u | tr -d '\012'`
-AC_DEFINE_UNQUOTED(PTYRANGE0,"$p0")
-AC_DEFINE_UNQUOTED(PTYRANGE1,"$p1")
-fi
-
-dnl **** pty mode/group handling ****
-dnl
-dnl support provided by Luke Mewburn , 931222
-AC_ARG_WITH(pty-mode, [ --with-pty-mode=mode default mode for ptys], [ ptymode="${withval}" ])
-AC_ARG_WITH(pty-group, [ --with-pty-group=group default group for ptys], [ ptygrp="${withval}" ])
-test -n "$ptymode" || ptymode=0620
-if test -n "$ptygrp" ; then
-AC_DEFINE_UNQUOTED(PTYMODE, $ptymode)
-AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp)
-else
-
-AC_CHECKING(default tty permissions/group)
-rm -f conftest_grp
-AC_TRY_RUN([
-#include
-#include
-#include
-main()
-{
- struct stat sb;
- char *x,*ttyname();
- int om, m;
- FILE *fp;
-
- if (!(x = ttyname(0))) exit(1);
- if (stat(x, &sb)) exit(1);
- om = sb.st_mode;
- if (om & 002) exit(0);
- m = system("mesg y");
- if (m == -1 || m == 127) exit(1);
- if (stat(x, &sb)) exit(1);
- m = sb.st_mode;
- if (chmod(x, om)) exit(1);
- if (m & 002) exit(0);
- if (sb.st_gid == getgid()) exit(1);
- if (!(fp=fopen("conftest_grp", "w")))
- exit(1);
- fprintf(fp, "%d\n", sb.st_gid);
- fclose(fp);
- exit(0);
-}
-],[
- if test -f conftest_grp; then
- ptygrp=`cat conftest_grp`
- AC_NOTE([- pty mode: $ptymode, group: $ptygrp])
- AC_DEFINE_UNQUOTED(PTYMODE, $ptymode)
- AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp)
- else
- AC_NOTE(- ptys are world accessable)
- fi
-],[
- WRITEPATH=''
- XTERMPATH=''
- AC_PATH_PROG(WRITEPATH, write)
- AC_PATH_PROG(XTERMPATH, xterm)
- found=
- if test -n "$WRITEPATH$XTERMPATH"; then
- findfollow=
- lsfollow=
- found=`find $WRITEPATH $XTERMPATH -follow -print 2>/dev/null`
- if test -n "$found"; then
- findfollow=-follow
- lsfollow=L
- fi
- if test -n "$XTERMPATH"; then
- ptygrpn=`ls -l$lsfollow $XTERMPATH | sed -n -e 1p | $AWK '{print $4}'`
- if test tty != "$ptygrpn"; then
- XTERMPATH=
- fi
- fi
- fi
- if test -n "$WRITEPATH$XTERMPATH"; then
- found=`find $WRITEPATH $XTERMPATH $findfollow -perm -2000 -print`
- if test -n "$found"; then
- ptygrp=`ls -ln$lsfollow $found | sed -n -e 1p | $AWK '{print $4}'`
- AC_NOTE([- pty mode: $ptymode, group: $ptygrp])
- AC_DEFINE_UNQUOTED(PTYMODE, $ptymode)
- AC_DEFINE_UNQUOTED(PTYGROUP,$ptygrp)
- else
- AC_NOTE(- ptys are world accessable)
- fi
- else
- AC_NOTE(- can't determine - assume ptys are world accessable)
- fi
- ]
-)
-rm -f conftest_grp
-fi
-
-dnl
-dnl **** signal handling ****
-dnl
-if test -n "$posix" ; then
-
-dnl POSIX has reliable signals with void return type.
-AC_NOTE(assuming posix signal definition)
-AC_DEFINE(SIGVOID)
-
-else
-
-AC_CHECKING(return type of signal handlers)
-AC_TRY_COMPILE(
-[#include
-#include
-#ifdef signal
-#undef signal
-#endif
-extern void (*signal ()) ();], [int i;], AC_DEFINE(SIGVOID))
-AC_CHECKING(sigset)
-AC_TRY_LINK([
-#include
-#include
-],[
-#ifdef SIGVOID
-sigset(0, (void (*)())0);
-#else
-sigset(0, (int (*)())0);
-#endif
-], AC_DEFINE(USESIGSET))
-AC_CHECKING(signal implementation)
-AC_TRY_RUN([
-#include
-#include
-
-#ifndef SIGCLD
-#define SIGCLD SIGCHLD
-#endif
-#ifdef USESIGSET
-#define signal sigset
-#endif
-
-int got;
-
-#ifdef SIGVOID
-void
-#endif
-hand()
-{
- got++;
-}
-
-main()
-{
- /* on hpux we use sigvec to get bsd signals */
-#ifdef __hpux
- (void)signal(SIGCLD, hand);
- kill(getpid(), SIGCLD);
- kill(getpid(), SIGCLD);
- if (got < 2)
- exit(1);
-#endif
- exit(0);
-}
-],,AC_DEFINE(SYSVSIGS))
-
-fi
-
-AC_OUTPUT(Makefile)
configure.in
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: rlfe.c
===================================================================
--- rlfe.c (revision 816)
+++ rlfe.c (nonexistent)
@@ -1,780 +0,0 @@
-/* A front-end using readline to "cook" input lines.
- *
- * Copyright (C) 2004, 1999 Per Bothner
- *
- * This front-end program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as published
- * by the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * Some code from Johnson & Troan: "Linux Application Development"
- * (Addison-Wesley, 1998) was used directly or for inspiration.
- *
- * 2003-11-07 Wolfgang Taeuber
- * Specify a history file and the size of the history file with command
- * line options; use EDITOR/VISUAL to set vi/emacs preference.
- */
-
-/* PROBLEMS/TODO:
- *
- * Only tested under GNU/Linux and Mac OS 10.x; needs to be ported.
- *
- * Switching between line-editing-mode vs raw-char-mode depending on
- * what tcgetattr returns is inherently not robust, plus it doesn't
- * work when ssh/telnetting in. A better solution is possible if the
- * tty system can send in-line escape sequences indicating the current
- * mode, echo'd input, etc. That would also allow a user preference
- * to set different colors for prompt, input, stdout, and stderr.
- *
- * When running mc -c under the Linux console, mc does not recognize
- * mouse clicks, which mc does when not running under rlfe.
- *
- * Pasting selected text containing tabs is like hitting the tab character,
- * which invokes readline completion. We don't want this. I don't know
- * if this is fixable without integrating rlfe into a terminal emulator.
- *
- * Echo suppression is a kludge, but can only be avoided with better kernel
- * support: We need a tty mode to disable "real" echoing, while still
- * letting the inferior think its tty driver to doing echoing.
- * Stevens's book claims SCR$ and BSD4.3+ have TIOCREMOTE.
- *
- * The latest readline may have some hooks we can use to avoid having
- * to back up the prompt. (See HAVE_ALREADY_PROMPTED.)
- *
- * Desirable readline feature: When in cooked no-echo mode (e.g. password),
- * echo characters are they are types with '*', but remove them when done.
- *
- * Asynchronous output while we're editing an input line should be
- * inserted in the output view *before* the input line, so that the
- * lines being edited (with the prompt) float at the end of the input.
- *
- * A "page mode" option to emulate more/less behavior: At each page of
- * output, pause for a user command. This required parsing the output
- * to keep track of line lengths. It also requires remembering the
- * output, if we want an option to scroll back, which suggests that
- * this should be integrated with a terminal emulator like xterm.
- */
-
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-#include
-
-#include "config.h"
-
-#ifdef READLINE_LIBRARY
-# include "readline.h"
-# include "history.h"
-#else
-# include
-# include
-#endif
-
-#ifndef COMMAND
-#define COMMAND "/bin/bash"
-#endif
-#ifndef COMMAND_ARGS
-#define COMMAND_ARGS COMMAND
-#endif
-
-#ifndef ALT_COMMAND
-#define ALT_COMMAND "/bin/sh"
-#endif
-#ifndef ALT_COMMAND_ARGS
-#define ALT_COMMAND_ARGS ALT_COMMAND
-#endif
-
-#ifndef HAVE_MEMMOVE
-# if __GNUC__ > 1
-# define memmove(d, s, n) __builtin_memcpy(d, s, n)
-# else
-# define memmove(d, s, n) memcpy(d, s, n)
-# endif
-#else
-# define memmove(d, s, n) memcpy(d, s, n)
-#endif
-
-#define APPLICATION_NAME "rlfe"
-
-static int in_from_inferior_fd;
-static int out_to_inferior_fd;
-static void set_edit_mode ();
-static void usage_exit ();
-static char *hist_file = 0;
-static int hist_size = 0;
-
-/* Unfortunately, we cannot safely display echo from the inferior process.
- The reason is that the echo bit in the pty is "owned" by the inferior,
- and if we try to turn it off, we could confuse the inferior.
- Thus, when echoing, we get echo twice: First readline echoes while
- we're actually editing. Then we send the line to the inferior, and the
- terminal driver send back an extra echo.
- The work-around is to remember the input lines, and when we see that
- line come back, we supress the output.
- A better solution (supposedly available on SVR4) would be a smarter
- terminal driver, with more flags ... */
-#define ECHO_SUPPRESS_MAX 1024
-char echo_suppress_buffer[ECHO_SUPPRESS_MAX];
-int echo_suppress_start = 0;
-int echo_suppress_limit = 0;
-
-/*#define DEBUG*/
-
-#ifdef DEBUG
-FILE *logfile = NULL;
-#define DPRINT0(FMT) (fprintf(logfile, FMT), fflush(logfile))
-#define DPRINT1(FMT, V1) (fprintf(logfile, FMT, V1), fflush(logfile))
-#define DPRINT2(FMT, V1, V2) (fprintf(logfile, FMT, V1, V2), fflush(logfile))
-#else
-#define DPRINT0(FMT) ((void) 0) /* Do nothing */
-#define DPRINT1(FMT, V1) ((void) 0) /* Do nothing */
-#define DPRINT2(FMT, V1, V2) ((void) 0) /* Do nothing */
-#endif
-
-struct termios orig_term;
-
-/* Pid of child process. */
-static pid_t child = -1;
-
-static void
-sig_child (int signo)
-{
- int status;
- wait (&status);
- if (hist_file != 0)
- {
- write_history (hist_file);
- if (hist_size)
- history_truncate_file (hist_file, hist_size);
- }
- DPRINT0 ("(Child process died.)\n");
- tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
- exit (0);
-}
-
-volatile int propagate_sigwinch = 0;
-
-/* sigwinch_handler
- * propagate window size changes from input file descriptor to
- * master side of pty.
- */
-void sigwinch_handler(int signal) {
- propagate_sigwinch = 1;
-}
-
-
-/* get_slave_pty() returns an integer file descriptor.
- * If it returns < 0, an error has occurred.
- * Otherwise, it has returned the slave file descriptor.
- */
-
-int get_slave_pty(char *name) {
- struct group *gptr;
- gid_t gid;
- int slave = -1;
-
- /* chown/chmod the corresponding pty, if possible.
- * This will only work if the process has root permissions.
- * Alternatively, write and exec a small setuid program that
- * does just this.
- */
- if ((gptr = getgrnam("tty")) != 0) {
- gid = gptr->gr_gid;
- } else {
- /* if the tty group does not exist, don't change the
- * group on the slave pty, only the owner
- */
- gid = -1;
- }
-
- /* Note that we do not check for errors here. If this is code
- * where these actions are critical, check for errors!
- */
- chown(name, getuid(), gid);
- /* This code only makes the slave read/writeable for the user.
- * If this is for an interactive shell that will want to
- * receive "write" and "wall" messages, OR S_IWGRP into the
- * second argument below.
- */
- chmod(name, S_IRUSR|S_IWUSR);
-
- /* open the corresponding slave pty */
- slave = open(name, O_RDWR);
- return (slave);
-}
-
-/* Certain special characters, such as ctrl/C, we want to pass directly
- to the inferior, rather than letting readline handle them. */
-
-static char special_chars[20];
-static int special_chars_count;
-
-static void
-add_special_char(int ch)
-{
- if (ch != 0)
- special_chars[special_chars_count++] = ch;
-}
-
-static int eof_char;
-
-static int
-is_special_char(int ch)
-{
- int i;
-#if 0
- if (ch == eof_char && rl_point == rl_end)
- return 1;
-#endif
- for (i = special_chars_count; --i >= 0; )
- if (special_chars[i] == ch)
- return 1;
- return 0;
-}
-
-static char buf[1024];
-/* buf[0 .. buf_count-1] is the what has been emitted on the current line.
- It is used as the readline prompt. */
-static int buf_count = 0;
-
-int do_emphasize_input = 1;
-int current_emphasize_input;
-
-char *start_input_mode = "\033[1m";
-char *end_input_mode = "\033[0m";
-
-int num_keys = 0;
-
-static void maybe_emphasize_input (int on)
-{
- if (on == current_emphasize_input
- || (on && ! do_emphasize_input))
- return;
- fprintf (rl_outstream, on ? start_input_mode : end_input_mode);
- fflush (rl_outstream);
- current_emphasize_input = on;
-}
-
-static void
-null_prep_terminal (int meta)
-{
-}
-
-static void
-null_deprep_terminal ()
-{
- maybe_emphasize_input (0);
-}
-
-static int
-pre_input_change_mode (void)
-{
- return 0;
-}
-
-char pending_special_char;
-
-static void
-line_handler (char *line)
-{
- if (line == NULL)
- {
- char buf[1];
- DPRINT0("saw eof!\n");
- buf[0] = '\004'; /* ctrl/d */
- write (out_to_inferior_fd, buf, 1);
- }
- else
- {
- static char enter[] = "\r";
- /* Send line to inferior: */
- int length = strlen (line);
- if (length > ECHO_SUPPRESS_MAX-2)
- {
- echo_suppress_start = 0;
- echo_suppress_limit = 0;
- }
- else
- {
- if (echo_suppress_limit + length > ECHO_SUPPRESS_MAX - 2)
- {
- if (echo_suppress_limit - echo_suppress_start + length
- <= ECHO_SUPPRESS_MAX - 2)
- {
- memmove (echo_suppress_buffer,
- echo_suppress_buffer + echo_suppress_start,
- echo_suppress_limit - echo_suppress_start);
- echo_suppress_limit -= echo_suppress_start;
- echo_suppress_start = 0;
- }
- else
- {
- echo_suppress_limit = 0;
- }
- echo_suppress_start = 0;
- }
- memcpy (echo_suppress_buffer + echo_suppress_limit,
- line, length);
- echo_suppress_limit += length;
- echo_suppress_buffer[echo_suppress_limit++] = '\r';
- echo_suppress_buffer[echo_suppress_limit++] = '\n';
- }
- write (out_to_inferior_fd, line, length);
- if (pending_special_char == 0)
- {
- write (out_to_inferior_fd, enter, sizeof(enter)-1);
- if (*line)
- add_history (line);
- }
- free (line);
- }
- rl_callback_handler_remove ();
- buf_count = 0;
- num_keys = 0;
- if (pending_special_char != 0)
- {
- write (out_to_inferior_fd, &pending_special_char, 1);
- pending_special_char = 0;
- }
-}
-
-/* Value of rl_getc_function.
- Use this because readline should read from stdin, not rl_instream,
- points to the pty (so readline has monitor its terminal modes). */
-
-int
-my_rl_getc (FILE *dummy)
-{
- int ch = rl_getc (stdin);
- if (is_special_char (ch))
- {
- pending_special_char = ch;
- return '\r';
- }
- return ch;
-}
-
-int
-main(int argc, char** argv)
-{
- char *path;
- int i;
- int master;
- char *name;
- int in_from_tty_fd;
- struct sigaction act;
- struct winsize ws;
- struct termios t;
- int maxfd;
- fd_set in_set;
- static char empty_string[1] = "";
- char *prompt = empty_string;
- int ioctl_err = 0;
- int arg_base = 1;
-
-#ifdef DEBUG
- logfile = fopen("/tmp/rlfe.log", "w");
-#endif
-
- while (arg_base= argc )
- usage_exit();
- switch(argv[arg_base][1])
- {
- case 'h':
- arg_base++;
- hist_file = argv[arg_base];
- break;
- case 's':
- arg_base++;
- hist_size = atoi(argv[arg_base]);
- if (hist_size<0)
- usage_exit();
- break;
- default:
- usage_exit();
- }
- arg_base++;
- }
- if (hist_file)
- read_history (hist_file);
-
- set_edit_mode ();
-
- rl_readline_name = APPLICATION_NAME;
-
- if ((master = OpenPTY (&name)) < 0)
- {
- perror("ptypair: could not open master pty");
- exit(1);
- }
-
- DPRINT1("pty name: '%s'\n", name);
-
- /* set up SIGWINCH handler */
- act.sa_handler = sigwinch_handler;
- sigemptyset(&(act.sa_mask));
- act.sa_flags = 0;
- if (sigaction(SIGWINCH, &act, NULL) < 0)
- {
- perror("ptypair: could not handle SIGWINCH ");
- exit(1);
- }
-
- if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) < 0)
- {
- perror("ptypair: could not get window size");
- exit(1);
- }
-
- if ((child = fork()) < 0)
- {
- perror("cannot fork");
- exit(1);
- }
-
- if (child == 0)
- {
- int slave; /* file descriptor for slave pty */
-
- /* We are in the child process */
- close(master);
-
-#ifdef TIOCSCTTY
- if ((slave = get_slave_pty(name)) < 0)
- {
- perror("ptypair: could not open slave pty");
- exit(1);
- }
-#endif
-
- /* We need to make this process a session group leader, because
- * it is on a new PTY, and things like job control simply will
- * not work correctly unless there is a session group leader
- * and process group leader (which a session group leader
- * automatically is). This also disassociates us from our old
- * controlling tty.
- */
- if (setsid() < 0)
- {
- perror("could not set session leader");
- }
-
- /* Tie us to our new controlling tty. */
-#ifdef TIOCSCTTY
- if (ioctl(slave, TIOCSCTTY, NULL))
- {
- perror("could not set new controlling tty");
- }
-#else
- if ((slave = get_slave_pty(name)) < 0)
- {
- perror("ptypair: could not open slave pty");
- exit(1);
- }
-#endif
-
- /* make slave pty be standard in, out, and error */
- dup2(slave, STDIN_FILENO);
- dup2(slave, STDOUT_FILENO);
- dup2(slave, STDERR_FILENO);
-
- /* at this point the slave pty should be standard input */
- if (slave > 2)
- {
- close(slave);
- }
-
- /* Try to restore window size; failure isn't critical */
- if (ioctl(STDOUT_FILENO, TIOCSWINSZ, &ws) < 0)
- {
- perror("could not restore window size");
- }
-
- /* now start the shell */
- {
- static char* command_args[] = { COMMAND_ARGS, NULL };
- static char* alt_command_args[] = { ALT_COMMAND_ARGS, NULL };
- if (argc <= 1)
- {
- execvp (COMMAND, command_args);
- execvp (ALT_COMMAND, alt_command_args);
- }
- else
- execvp (argv[arg_base], &argv[arg_base]);
- }
-
- /* should never be reached */
- exit(1);
- }
-
- /* parent */
- signal (SIGCHLD, sig_child);
-
- /* Note that we only set termios settings for standard input;
- * the master side of a pty is NOT a tty.
- */
- tcgetattr(STDIN_FILENO, &orig_term);
-
- t = orig_term;
- eof_char = t.c_cc[VEOF];
- /* add_special_char(t.c_cc[VEOF]);*/
- add_special_char(t.c_cc[VINTR]);
- add_special_char(t.c_cc[VQUIT]);
- add_special_char(t.c_cc[VSUSP]);
-#if defined (VDISCARD)
- add_special_char(t.c_cc[VDISCARD]);
-#endif
-
- t.c_lflag &= ~(ICANON | ISIG | ECHO | ECHOCTL | ECHOE | \
- ECHOK | ECHOKE | ECHONL | ECHOPRT );
- t.c_iflag &= ~ICRNL;
- t.c_iflag |= IGNBRK;
- t.c_cc[VMIN] = 1;
- t.c_cc[VTIME] = 0;
- tcsetattr(STDIN_FILENO, TCSANOW, &t);
- in_from_inferior_fd = master;
- out_to_inferior_fd = master;
- rl_instream = fdopen (master, "r");
- rl_getc_function = my_rl_getc;
-
- rl_prep_term_function = null_prep_terminal;
- rl_deprep_term_function = null_deprep_terminal;
- rl_pre_input_hook = pre_input_change_mode;
- rl_callback_handler_install (prompt, line_handler);
-
- in_from_tty_fd = STDIN_FILENO;
- FD_ZERO (&in_set);
- maxfd = in_from_inferior_fd > in_from_tty_fd ? in_from_inferior_fd
- : in_from_tty_fd;
- for (;;)
- {
- int num;
- FD_SET (in_from_inferior_fd, &in_set);
- FD_SET (in_from_tty_fd, &in_set);
-
- num = select(maxfd+1, &in_set, NULL, NULL, NULL);
-
- if (propagate_sigwinch)
- {
- struct winsize ws;
- if (ioctl (STDIN_FILENO, TIOCGWINSZ, &ws) >= 0)
- {
- ioctl (master, TIOCSWINSZ, &ws);
- }
- propagate_sigwinch = 0;
- continue;
- }
-
- if (num <= 0)
- {
- perror ("select");
- exit (-1);
- }
- if (FD_ISSET (in_from_tty_fd, &in_set))
- {
- extern int readline_echoing_p;
- struct termios term_master;
- int do_canon = 1;
- int do_icrnl = 1;
- int ioctl_ret;
-
- DPRINT1("[tty avail num_keys:%d]\n", num_keys);
-
- /* If we can't get tty modes for the master side of the pty, we
- can't handle non-canonical-mode programs. Always assume the
- master is in canonical echo mode if we can't tell. */
- ioctl_ret = tcgetattr(master, &term_master);
-
- if (ioctl_ret >= 0)
- {
- do_canon = (term_master.c_lflag & ICANON) != 0;
- do_icrnl = (term_master.c_lflag & ICRNL) != 0;
- readline_echoing_p = (term_master.c_lflag & ECHO) != 0;
- DPRINT1 ("echo,canon,crnl:%03d\n",
- 100 * readline_echoing_p
- + 10 * do_canon
- + 1 * do_icrnl);
- }
- else
- {
- if (ioctl_err == 0)
- DPRINT1("tcgetattr on master fd failed: errno = %d\n", errno);
- ioctl_err = 1;
- }
-
- if (do_canon == 0 && num_keys == 0)
- {
- char ch[10];
- int count = read (STDIN_FILENO, ch, sizeof(ch));
- DPRINT1("[read %d chars from stdin: ", count);
- DPRINT2(" \"%.*s\"]\n", count, ch);
- if (do_icrnl)
- {
- int i = count;
- while (--i >= 0)
- {
- if (ch[i] == '\r')
- ch[i] = '\n';
- }
- }
- maybe_emphasize_input (1);
- write (out_to_inferior_fd, ch, count);
- }
- else
- {
- if (num_keys == 0)
- {
- int i;
- /* Re-install callback handler for new prompt. */
- if (prompt != empty_string)
- free (prompt);
- if (prompt == NULL)
- {
- DPRINT0("New empty prompt\n");
- prompt = empty_string;
- }
- else
- {
- if (do_emphasize_input && buf_count > 0)
- {
- prompt = malloc (buf_count + strlen (end_input_mode)
- + strlen (start_input_mode) + 5);
- sprintf (prompt, "\001%s\002%.*s\001%s\002",
- end_input_mode,
- buf_count, buf,
- start_input_mode);
- }
- else
- {
- prompt = malloc (buf_count + 1);
- memcpy (prompt, buf, buf_count);
- prompt[buf_count] = '\0';
- }
- DPRINT1("New prompt '%s'\n", prompt);
-#if 0 /* ifdef HAVE_RL_ALREADY_PROMPTED */
- /* Doesn't quite work when do_emphasize_input is 1. */
- rl_already_prompted = buf_count > 0;
-#else
- if (buf_count > 0)
- write (1, "\r", 1);
-#endif
- }
-
- rl_callback_handler_install (prompt, line_handler);
- }
- num_keys++;
- maybe_emphasize_input (1);
- rl_callback_read_char ();
- }
- }
- else /* output from inferior. */
- {
- int i;
- int count;
- int old_count;
- if (buf_count > (sizeof(buf) >> 2))
- buf_count = 0;
- count = read (in_from_inferior_fd, buf+buf_count,
- sizeof(buf) - buf_count);
- DPRINT2("read %d from inferior, buf_count=%d", count, buf_count);
- DPRINT2(": \"%.*s\"", count, buf+buf_count);
- maybe_emphasize_input (0);
- if (count <= 0)
- {
- DPRINT0 ("(Connection closed by foreign host.)\n");
- tcsetattr(STDIN_FILENO, TCSANOW, &orig_term);
- exit (0);
- }
- old_count = buf_count;
-
- /* Look for any pending echo that we need to suppress. */
- while (echo_suppress_start < echo_suppress_limit
- && count > 0
- && buf[buf_count] == echo_suppress_buffer[echo_suppress_start])
- {
- count--;
- buf_count++;
- echo_suppress_start++;
- }
- DPRINT1("suppressed %d characters of echo.\n", buf_count-old_count);
-
- /* Write to the terminal anything that was not suppressed. */
- if (count > 0)
- write (1, buf + buf_count, count);
-
- /* Finally, look for a prompt candidate.
- * When we get around to going input (from the keyboard),
- * we will consider the prompt to be anything since the last
- * line terminator. So we need to save that text in the
- * initial part of buf. However, anything before the
- * most recent end-of-line is not interesting. */
- buf_count += count;
-#if 1
- for (i = buf_count; --i >= old_count; )
-#else
- for (i = buf_count - 1; i-- >= buf_count - count; )
-#endif
- {
- if (buf[i] == '\n' || buf[i] == '\r')
- {
- i++;
- memmove (buf, buf+i, buf_count - i);
- buf_count -= i;
- break;
- }
- }
- DPRINT2("-> i: %d, buf_count: %d\n", i, buf_count);
- }
- }
-}
-
-static void set_edit_mode ()
-{
- int vi = 0;
- char *shellopts;
-
- shellopts = getenv ("SHELLOPTS");
- while (shellopts != 0)
- {
- if (strncmp ("vi", shellopts, 2) == 0)
- {
- vi = 1;
- break;
- }
- shellopts = index (shellopts + 1, ':');
- }
-
- if (!vi)
- {
- if (getenv ("EDITOR") != 0)
- vi |= strcmp (getenv ("EDITOR"), "vi") == 0;
- }
-
- if (vi)
- rl_variable_bind ("editing-mode", "vi");
- else
- rl_variable_bind ("editing-mode", "emacs");
-}
-
-
-static void usage_exit ()
-{
- fprintf (stderr, "Usage: rlfe [-h histfile] [-s size] cmd [arg1] [arg2] ...\n\n");
- exit (1);
-}
rlfe.c
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: README
===================================================================
--- README (revision 816)
+++ README (nonexistent)
@@ -1,78 +0,0 @@
-rlfe (ReadLine Front-End) is a "universal wrapper" around readline.
-You specify an interactive program to run (typically a shell), and
-readline is used to edit input lines.
-
-There are other such front-ends; what distinguishes this one is that
-it monitors the state of the inferior pty, and if the inferior program
-switches its terminal to raw mode, then rlfe passes your characters
-through directly. This basically means you can run your entire
-session (including bash and terminal-mode emacs) under rlfe.
-
-FEATURES
-
-* Can use all readline commands (and history) in commands that
-read input lines in "canonical mode" - even 'cat'!
-
-* Automatically switches between "readline-editing mode" and "raw mode"
-depending on the terminal mode. If the inferior program invokes
-readline itself, it will do its own line editing. (The inferior
-readline will not know about rlfe, and it will have its own history.)
-You can even run programs like 'emavs -nw' and 'vi' under rlfe.
-The goal is you could leave rlfe always on without even knowing
-about it. (We're not quite there, but it works tolerably well.)
-
-* The input line (after any prompt) is changed to bold-face.
-
-INSTALL
-
-The usual: ./configure && make && make install
-
-Note so far rlfe has only been tested on GNU Linux (Fedora Core 2)
-and Mac OS X (10.3).
-
-This assumes readline header files and libraries are in the default
-places. If not, you can create a link named readline pointing to the
-readline sources. To link with libreadline.a and libhistory.a
-you can copy or link them, or add LDFLAGS='-/path/to/readline' to
-the make command-line.
-
-USAGE
-
-Just run it. That by default runs bash. You can run some other
-command by giving it as command-line arguments.
-
-There are a few tweaks: -h allows you to name the history file,
-and -s allows you to specify its size. It default to "emacs" mode,
-but if the the environment variable EDITOR is set to "vi" that
-mode is chosen.
-
-ISSUES
-
-* The mode switching depends on the terminal mode set by the inferior
-program. Thus ssh/telnet/screen-type programs will typically be in
-raw mode, so rlfe won't be much use, even if remote programs run in
-canonical mode. The work-around is to run rlfe on the remote end.
-
-* Echo supression and prompt recognition are somewhat fragile.
-(A protocol so that the o/s tty code can reliably communicate its
-state to rlfe could solve this problem, and the previous one.)
-
-* See the intro to rlfe.c for more notes.
-
-* Assumes a VT100-compatible terminal, though that could be generalized
-if anybody cares.
-
-* Requires ncurses.
-
-* It would be useful to integrate rlfe's logic in a terminal emulator.
-That would make it easier to reposition the edit position with a mouse,
-integrate cut-and-paste with the system clipboard, and more robustly
-handle escape sequence and multi-byte characters more robustly.
-
-AUTHOR
-
-Per Bothner
-
-LICENSE
-
-GPL.
README
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property
Index: pty.c
===================================================================
--- pty.c (revision 816)
+++ pty.c (nonexistent)
@@ -1,387 +0,0 @@
-/* Copyright (c) 1993-2002
- * Juergen Weigert (jnweiger@immd4.informatik.uni-erlangen.de)
- * Michael Schroeder (mlschroe@immd4.informatik.uni-erlangen.de)
- * Copyright (c) 1987 Oliver Laumann
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program (see the file COPYING); if not, write to the
- * Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- ****************************************************************
- */
-
-#include
-#include
-#include
-#include
-
-#include "config.h"
-#include "screen.h"
-
-#ifndef sun
-# include
-#endif
-
-/* for solaris 2.1, Unixware (SVR4.2) and possibly others */
-#ifdef HAVE_SVR4_PTYS
-# include
-#endif
-
-#if defined(sun) && defined(LOCKPTY) && !defined(TIOCEXCL)
-# include
-#endif
-
-#ifdef ISC
-# include
-# include
-# include
-#endif
-
-#ifdef sgi
-# include
-#endif /* sgi */
-
-#include "extern.h"
-
-/*
- * if no PTYRANGE[01] is in the config file, we pick a default
- */
-#ifndef PTYRANGE0
-# define PTYRANGE0 "qpr"
-#endif
-#ifndef PTYRANGE1
-# define PTYRANGE1 "0123456789abcdef"
-#endif
-
-/* SVR4 pseudo ttys don't seem to work with SCO-5 */
-#ifdef M_UNIX
-# undef HAVE_SVR4_PTYS
-#endif
-
-extern int eff_uid;
-
-/* used for opening a new pty-pair: */
-static char PtyName[32], TtyName[32];
-
-#if !(defined(sequent) || defined(_SEQUENT_) || defined(HAVE_SVR4_PTYS))
-# ifdef hpux
-static char PtyProto[] = "/dev/ptym/ptyXY";
-static char TtyProto[] = "/dev/pty/ttyXY";
-# else
-# ifdef M_UNIX
-static char PtyProto[] = "/dev/ptypXY";
-static char TtyProto[] = "/dev/ttypXY";
-# else
-static char PtyProto[] = "/dev/ptyXY";
-static char TtyProto[] = "/dev/ttyXY";
-# endif
-# endif /* hpux */
-#endif
-
-static void initmaster __P((int));
-
-#if defined(sun)
-/* sun's utmp_update program opens the salve side, thus corrupting
- */
-int pty_preopen = 1;
-#else
-int pty_preopen = 0;
-#endif
-
-/*
- * Open all ptys with O_NOCTTY, just to be on the safe side
- * (RISCos mips breaks otherwise)
- */
-#ifndef O_NOCTTY
-# define O_NOCTTY 0
-#endif
-
-/***************************************************************/
-
-static void
-initmaster(f)
-int f;
-{
-#ifdef POSIX
- tcflush(f, TCIOFLUSH);
-#else
-# ifdef TIOCFLUSH
- (void) ioctl(f, TIOCFLUSH, (char *) 0);
-# endif
-#endif
-#ifdef LOCKPTY
- (void) ioctl(f, TIOCEXCL, (char *) 0);
-#endif
-}
-
-void
-InitPTY(f)
-int f;
-{
- if (f < 0)
- return;
-#if defined(I_PUSH) && defined(HAVE_SVR4_PTYS) && !defined(sgi) && !defined(linux) && !defined(__osf__) && !defined(M_UNIX)
- if (ioctl(f, I_PUSH, "ptem"))
- Panic(errno, "InitPTY: cannot I_PUSH ptem");
- if (ioctl(f, I_PUSH, "ldterm"))
- Panic(errno, "InitPTY: cannot I_PUSH ldterm");
-# ifdef sun
- if (ioctl(f, I_PUSH, "ttcompat"))
- Panic(errno, "InitPTY: cannot I_PUSH ttcompat");
-# endif
-#endif
-}
-
-/***************************************************************/
-
-#if defined(OSX) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- register int f;
- if ((f = open_controlling_pty(TtyName)) < 0)
- return -1;
- initmaster(f);
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if (defined(sequent) || defined(_SEQUENT_)) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- char *m, *s;
- register int f;
-
- if ((f = getpseudotty(&s, &m)) < 0)
- return -1;
-#ifdef _SEQUENT_
- fvhangup(s);
-#endif
- strncpy(PtyName, m, sizeof(PtyName));
- strncpy(TtyName, s, sizeof(TtyName));
- initmaster(f);
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if defined(__sgi) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- int f;
- char *name, *_getpty();
- sigret_t (*sigcld)__P(SIGPROTOARG);
-
- /*
- * SIGCHLD set to SIG_DFL for _getpty() because it may fork() and
- * exec() /usr/adm/mkpts
- */
- sigcld = signal(SIGCHLD, SIG_DFL);
- name = _getpty(&f, O_RDWR | O_NONBLOCK, 0600, 0);
- signal(SIGCHLD, sigcld);
-
- if (name == 0)
- return -1;
- initmaster(f);
- *ttyn = name;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if defined(MIPS) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- register int f;
- struct stat buf;
-
- strcpy(PtyName, "/dev/ptc");
- if ((f = open(PtyName, O_RDWR | O_NOCTTY | O_NONBLOCK)) < 0)
- return -1;
- if (fstat(f, &buf) < 0)
- {
- close(f);
- return -1;
- }
- sprintf(TtyName, "/dev/ttyq%d", minor(buf.st_rdev));
- initmaster(f);
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if defined(HAVE_SVR4_PTYS) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- register int f;
- char *m, *ptsname();
- int unlockpt __P((int)), grantpt __P((int));
-#if defined(HAVE_GETPT) && defined(linux)
- int getpt __P((void));
-#endif
- sigret_t (*sigcld)__P(SIGPROTOARG);
-
- strcpy(PtyName, "/dev/ptmx");
-#if defined(HAVE_GETPT) && defined(linux)
- if ((f = getpt()) == -1)
-#else
- if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1)
-#endif
- return -1;
-
- /*
- * SIGCHLD set to SIG_DFL for grantpt() because it fork()s and
- * exec()s pt_chmod
- */
- sigcld = signal(SIGCHLD, SIG_DFL);
- if ((m = ptsname(f)) == NULL || grantpt(f) || unlockpt(f))
- {
- signal(SIGCHLD, sigcld);
- close(f);
- return -1;
- }
- signal(SIGCHLD, sigcld);
- strncpy(TtyName, m, sizeof(TtyName));
- initmaster(f);
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if defined(_AIX) && defined(HAVE_DEV_PTC) && !defined(PTY_DONE)
-#define PTY_DONE
-
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- register int f;
-
- /* a dumb looking loop replaced by mycrofts code: */
- strcpy (PtyName, "/dev/ptc");
- if ((f = open (PtyName, O_RDWR | O_NOCTTY)) < 0)
- return -1;
- strncpy(TtyName, ttyname(f), sizeof(TtyName));
- if (eff_uid && access(TtyName, R_OK | W_OK))
- {
- close(f);
- return -1;
- }
- initmaster(f);
-# ifdef _IBMR2
- pty_preopen = 1;
-# endif
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#if defined(HAVE_OPENPTY) && !defined(PTY_DONE)
-#define PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- int f, s;
- if (openpty(&f, &s, TtyName, NULL, NULL) != 0)
- return -1;
- close(s);
- initmaster(f);
- pty_preopen = 1;
- *ttyn = TtyName;
- return f;
-}
-#endif
-
-/***************************************************************/
-
-#ifndef PTY_DONE
-int
-OpenPTY(ttyn)
-char **ttyn;
-{
- register char *p, *q, *l, *d;
- register int f;
-
- debug("OpenPTY: Using BSD style ptys.\n");
- strcpy(PtyName, PtyProto);
- strcpy(TtyName, TtyProto);
- for (p = PtyName; *p != 'X'; p++)
- ;
- for (q = TtyName; *q != 'X'; q++)
- ;
- for (l = PTYRANGE0; (*p = *l) != '\0'; l++)
- {
- for (d = PTYRANGE1; (p[1] = *d) != '\0'; d++)
- {
- debug1("OpenPTY tries '%s'\n", PtyName);
- if ((f = open(PtyName, O_RDWR | O_NOCTTY)) == -1)
- continue;
- q[0] = *l;
- q[1] = *d;
- if (eff_uid && access(TtyName, R_OK | W_OK))
- {
- close(f);
- continue;
- }
-#if defined(sun) && defined(TIOCGPGRP) && !defined(SUNOS3)
- /* Hack to ensure that the slave side of the pty is
- * unused. May not work in anything other than SunOS4.1
- */
- {
- int pgrp;
-
- /* tcgetpgrp does not work (uses TIOCGETPGRP)! */
- if (ioctl(f, TIOCGPGRP, (char *)&pgrp) != -1 || errno != EIO)
- {
- close(f);
- continue;
- }
- }
-#endif
- initmaster(f);
- *ttyn = TtyName;
- return f;
- }
- }
- return -1;
-}
-#endif
-
pty.c
Property changes :
Deleted: svn:eol-style
## -1 +0,0 ##
-native
\ No newline at end of property
Deleted: svn:keywords
## -1 +0,0 ##
-Id
\ No newline at end of property