URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/gnu-old/gdb-7.1/sim/h8300
- from Rev 834 to Rev 842
- ↔ Reverse comparison
Rev 834 → Rev 842
/sim-main.h
0,0 → 1,172
/* Main header for the Hitachi h8/300 architecture. */ |
|
#include "bfd.h" |
|
#ifndef SIM_MAIN_H |
#define SIM_MAIN_H |
|
#define DEBUG |
|
/* These define the size of main memory for the simulator. |
|
Note the size of main memory for the H8/300H is only 256k. Keeping it |
small makes the simulator run much faster and consume less memory. |
|
The linker knows about the limited size of the simulator's main memory |
on the H8/300H (via the h8300h.sc linker script). So if you change |
H8300H_MSIZE, be sure to fix the linker script too. |
|
Also note that there's a separate "eightbit" area aside from main |
memory. For simplicity, the simulator assumes any data memory reference |
outside of main memory refers to the eightbit area (in theory, this |
can only happen when simulating H8/300H programs). We make no attempt |
to catch overlapping addresses, wrapped addresses, etc etc. */ |
|
#define H8300_MSIZE (1 << 16) |
|
/* avolkov: |
Next 2 macros are ugly for any workstation, but while they're work. |
Memory size MUST be configurable. */ |
#define H8300H_MSIZE (1 << 24) |
#define H8300S_MSIZE (1 << 24) |
|
#define CSIZE 1024 |
|
enum h8_regnum { |
R0_REGNUM = 0, |
R1_REGNUM = 1, |
R2_REGNUM = 2, |
R3_REGNUM = 3, |
R4_REGNUM = 4, |
R5_REGNUM = 5, |
R6_REGNUM = 6, |
R7_REGNUM = 7, |
|
SP_REGNUM = R7_REGNUM, /* Contains address of top of stack */ |
FP_REGNUM = R6_REGNUM, /* Contains address of executing |
stack frame */ |
CCR_REGNUM = 8, /* Contains processor status */ |
PC_REGNUM = 9, /* Contains program counter */ |
CYCLE_REGNUM = 10, |
EXR_REGNUM = 11, |
INST_REGNUM = 12, |
TICK_REGNUM = 13, |
MACH_REGNUM = 14, |
MACL_REGNUM = 15, |
SBR_REGNUM = 16, |
VBR_REGNUM = 17, |
|
ZERO_REGNUM = 18 |
}; |
|
enum h8_typecodes { |
OP_NULL, |
OP_REG, /* Register direct. */ |
OP_LOWREG, /* Special reg syntax for "bra". */ |
OP_DISP, /* Register indirect w/displacement. */ |
/* Note: h8300, h8300h, and h8300s permit only pre-decr and post-incr. */ |
OP_PREDEC, /* Register indirect w/pre-decrement. */ |
OP_POSTDEC, /* Register indirect w/post-decrement. */ |
OP_PREINC, /* Register indirect w/pre-increment. */ |
OP_POSTINC, /* Register indirect w/post-increment. */ |
OP_PCREL, /* PC Relative. */ |
OP_MEM, /* Absolute memory address. */ |
OP_CCR, /* Condition Code Register. */ |
OP_IMM, /* Immediate value. */ |
/*OP_ABS*/ /* Un-used (duplicates op_mem?). */ |
OP_EXR, /* EXtended control Register. */ |
OP_SBR, /* Vector Base Register. */ |
OP_VBR, /* Short-address Base Register. */ |
OP_MACH, /* Multiply Accumulator - high. */ |
OP_MACL, /* Multiply Accumulator - low. */ |
/* FIXME: memory indirect? */ |
OP_INDEXB, /* Byte index mode */ |
OP_INDEXW, /* Word index mode */ |
OP_INDEXL /* Long index mode */ |
}; |
|
#include "sim-basics.h" |
|
/* Define sim_cia. */ |
typedef unsigned32 sim_cia; |
|
#include "sim-base.h" |
|
/* Structure used to describe addressing */ |
|
typedef struct |
{ |
int type; |
int reg; |
int literal; |
} ea_type; |
|
/* Struct for instruction decoder. */ |
typedef struct |
{ |
ea_type src; |
ea_type dst; |
ea_type op3; |
int opcode; |
int next_pc; |
int oldpc; |
int cycles; |
#ifdef DEBUG |
struct h8_opcode *op; |
#endif |
} decoded_inst; |
|
struct _sim_cpu { |
unsigned int regs[20]; /* 8 GR's plus ZERO, SBR, and VBR. */ |
unsigned int pc; |
|
int macS; /* MAC Saturating mode */ |
int macV; /* MAC Overflow */ |
int macN; /* MAC Negative */ |
int macZ; /* MAC Zero */ |
|
int delayed_branch; |
char **command_line; /* Pointer to command line arguments. */ |
|
unsigned char *memory; |
unsigned char *eightbit; |
int mask; |
|
sim_cpu_base base; |
}; |
|
/* The sim_state struct. */ |
struct sim_state { |
struct _sim_cpu *cpu; |
unsigned int sim_cache_size; |
decoded_inst *sim_cache; |
unsigned short *cache_idx; |
unsigned long memory_size; |
int cache_top; |
int compiles; |
#ifdef ADEBUG |
int stats[O_LAST]; |
#endif |
sim_state_base base; |
}; |
|
/* The current state of the processor; registers, memory, etc. */ |
|
#define CIA_GET(CPU) (cpu_get_pc (CPU)) |
#define CIA_SET(CPU, VAL) (cpu_set_pc ((CPU), (VAL))) |
#define STATE_CPU(SD, N) ((SD)->cpu) /* Single Processor. */ |
#define cpu_set_pc(CPU, VAL) (((CPU)->pc) = (VAL)) |
#define cpu_get_pc(CPU) (((CPU)->pc)) |
|
/* Magic numbers used to distinguish an exit from a breakpoint. */ |
#define LIBC_EXIT_MAGIC1 0xdead |
#define LIBC_EXIT_MAGIC2 0xbeef |
/* Local version of macros for decoding exit status. |
(included here rather than try to find target version of wait.h) |
*/ |
#define SIM_WIFEXITED(V) (((V) & 0xff) == 0) |
#define SIM_WIFSTOPPED(V) (!SIM_WIFEXITED (V)) |
#define SIM_WEXITSTATUS(V) (((V) >> 8) & 0xff) |
#define SIM_WSTOPSIG(V) ((V) & 0x7f) |
|
#endif /* SIM_MAIN_H */ |
sim-main.h
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: configure
===================================================================
--- configure (nonexistent)
+++ configure (revision 842)
@@ -0,0 +1,5878 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.64.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 7<&0 &1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="Makefile.in"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include
+#ifdef HAVE_SYS_TYPES_H
+# include
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include
+#endif
+#ifdef STDC_HEADERS
+# include
+# include
+#else
+# ifdef HAVE_STDLIB_H
+# include
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include
+# endif
+# include
+#endif
+#ifdef HAVE_STRINGS_H
+# include
+#endif
+#ifdef HAVE_INTTYPES_H
+# include
+#endif
+#ifdef HAVE_STDINT_H
+# include
+#endif
+#ifdef HAVE_UNISTD_H
+# include
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+cgen_breaks
+REPORT_BUGS_TEXI
+REPORT_BUGS_TO
+PKGVERSION
+sim_profile
+sim_trace
+sim_stdio
+sim_debug
+sim_cflags
+sim_bswap
+MAINT
+EGREP
+GREP
+CPP
+CATOBJEXT
+GENCAT
+INSTOBJEXT
+DATADIRNAME
+CATALOGS
+POSUB
+GMSGFMT
+XGETTEXT
+INCINTL
+LIBINTL_DEP
+LIBINTL
+USE_NLS
+RANLIB
+AR
+HDEFINES
+CC_FOR_BUILD
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+WERROR_CFLAGS
+WARN_CFLAGS
+sim_xor_endian
+sim_stdcall
+sim_smp
+sim_reserved_bits
+sim_regparm
+sim_packages
+sim_inline
+sim_hw
+sim_hw_objs
+sim_hw_cflags
+sim_default_model
+sim_scache
+sim_float
+sim_hostendian
+sim_endian
+sim_bitsize
+sim_assert
+sim_alignment
+sim_environment
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_zlib
+enable_maintainer_mode
+enable_sim_bswap
+enable_sim_cflags
+enable_sim_debug
+enable_sim_stdio
+enable_sim_trace
+enable_sim_profile
+with_pkgversion
+with_bugurl
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode Enable developer functionality.
+ --enable-sim-bswap Use Host specific BSWAP instruction.
+ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator
+ --enable-sim-debug=opts Enable debugging flags
+ --enable-sim-stdio Specify whether to use stdio for console input/output.
+ --enable-sim-trace=opts Enable tracing flags
+ --enable-sim-profile=opts Enable profiling flags
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-zlib include zlib support (auto/yes/no) default=auto
+ --with-pkgversion=PKG Use PKG in the version string in place of "GDB"
+ --with-bugurl=URL Direct users to URL to report a bug
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L if you have libraries in a
+ nonstandard directory
+ LIBS libraries to pass to the linker, e.g. -l
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if
+ you have headers in a nonstandard directory
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.64
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case declares $2.
+ For example, HP-UX 11i declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer to if __STDC__ is defined, since
+ exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+ac_config_headers="$ac_config_headers config.h:config.in"
+
+
+# This file contains common code used by all simulators.
+#
+# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
+# directory. It is intended to be invoked before any target specific stuff.
+# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
+# It is intended to be invoked last.
+#
+# The simulator's configure.in should look like:
+#
+# dnl Process this file with autoconf to produce a configure script.
+# sinclude(../common/aclocal.m4)
+# AC_PREREQ(2.5)dnl
+# AC_INIT(Makefile.in)
+#
+# SIM_AC_COMMON
+#
+# ... target specific stuff ...
+#
+# SIM_AC_OUTPUT
+
+# Include global overrides and fixes for Autoconf.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+sim_inline="-DDEFAULT_INLINE=0"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# intl sister-directory configuration rules.
+#
+
+# The idea behind this macro is that there's no need to repeat all the
+# autoconf probes done by the intl directory - it's already done them
+# for us. In fact, there's no need even to look at the cache for the
+# answers. All we need to do is nab a few pieces of information.
+# The intl directory is set up to make this easy, by generating a
+# small file which can be sourced as a shell script; then we produce
+# the necessary substitutions and definitions for this directory.
+
+
+
+# Autoconf M4 include file defining utility macros for complex Canadian
+# cross builds.
+
+
+
+
+
+
+
+
+
+####
+# _NCN_TOOL_PREFIXES: Some stuff that oughtta be done in AC_CANONICAL_SYSTEM
+# or AC_INIT.
+# These demand that AC_CANONICAL_SYSTEM be called beforehand.
+
+####
+# NCN_STRICT_CHECK_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like plain AC_CHECK_TOOLS, but require prefix if build!=host.
+
+
+####
+# NCN_STRICT_CHECK_TARGET_TOOLS(variable, progs-to-check-for,[value-if-not-found],[path])
+# Like CVS Autoconf AC_CHECK_TARGET_TOOLS, but require prefix if build!=target.
+
+
+
+# Backported from Autoconf 2.5x; can go away when and if
+# we switch. Put the OS path separator in $PATH_SEPARATOR.
+
+
+
+
+# ACX_HAVE_GCC_FOR_TARGET
+# Check if the variable GCC_FOR_TARGET really points to a GCC binary.
+
+
+# ACX_CHECK_INSTALLED_TARGET_TOOL(VAR, PROG)
+# Searching for installed target binutils. We need to take extra care,
+# else we may find the wrong assembler, linker, etc., and lose.
+#
+# First try --with-build-time-tools, if specified.
+#
+# For build != host, we ask the installed GCC for the name of the tool it
+# uses, and accept it if it is an absolute path. This is because the
+# only good choice for a compiler is the same GCC version that is being
+# installed (or we couldn't make target libraries), and we assume that
+# on the host system we'll have not only the same GCC version, but also
+# the same binutils version.
+#
+# For build == host, search the same directories that the installed
+# compiler will search. We used to do this for the assembler, linker,
+# and nm only; for simplicity of configuration, however, we extend this
+# criterion to tools (such as ar and ranlib) that are never invoked by
+# the compiler, to avoid mismatches.
+#
+# Also note we have to check MD_EXEC_PREFIX before checking the user's path
+# if build == target. This makes the most sense only when bootstrapping,
+# but we also do so when build != host. In this case, we hope that the
+# build and host systems will have similar contents of MD_EXEC_PREFIX.
+#
+# If we do not find a suitable binary, then try the user's path.
+
+
+###
+# AC_PROG_CPP_WERROR
+# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which
+# triggers warnings from the preprocessor. Will be in autoconf 2.58.
+# For now, using this also overrides header checks to use only the
+# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a
+# bit harder from here).
+# Eventually autoconf will default to checking headers with the compiler
+# instead, and we'll have to do this differently.
+
+# AC_PROG_CPP_WERROR
+
+# Test for GNAT.
+# We require the gnatbind program, and a compiler driver that
+# understands Ada. We use the user's CC setting, already found,
+# and possibly add $1 to the command-line parameters.
+#
+# Sets the shell variable have_gnat to yes or no as appropriate, and
+# substitutes GNATBIND and GNATMAKE.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Bugs in autoconf 2.59 break the call to SIM_AC_COMMON, hack around
+# it by inlining the macro's contents.
+# This file contains common code used by all simulators.
+#
+# common.m4 invokes AC macros used by all simulators and by the common
+# directory. It is intended to be included before any target specific
+# stuff. SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate
+# the Makefile. It is intended to be invoked last.
+#
+# The simulator's configure.in should look like:
+#
+# dnl Process this file with autoconf to produce a configure script.
+# AC_PREREQ(2.5)dnl
+# AC_INIT(Makefile.in)
+# AC_CONFIG_HEADER(config.h:config.in)
+#
+# sinclude(../common/aclocal.m4)
+# sinclude(../common/common.m4)
+#
+# ... target specific stuff ...
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if test "${ac_cv_target+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical target" "$LINENO" 5;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ rm -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then :
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+fi
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+#include
+#include
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# Put a plausible default for CC_FOR_BUILD in Makefile.
+if test "x$cross_compiling" = "xno"; then
+ CC_FOR_BUILD='$(CC)'
+else
+ CC_FOR_BUILD=gcc
+fi
+
+
+
+
+AR=${AR-ar}
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+
+ALL_LINGUAS=
+# If we haven't got the data from the intl directory,
+# assume NLS is disabled.
+USE_NLS=no
+LIBINTL=
+LIBINTL_DEP=
+INCINTL=
+XGETTEXT=
+GMSGFMT=
+POSUB=
+
+if test -f ../../intl/config.intl; then
+ . ../../intl/config.intl
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+if test x"$USE_NLS" != xyes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for catalogs to be installed" >&5
+$as_echo_n "checking for catalogs to be installed... " >&6; }
+ # Look for .po and .gmo files in the source directory.
+ CATALOGS=
+ XLINGUAS=
+ for cat in $srcdir/po/*.gmo $srcdir/po/*.po; do
+ # If there aren't any .gmo files the shell will give us the
+ # literal string "../path/to/srcdir/po/*.gmo" which has to be
+ # weeded out.
+ case "$cat" in *\**)
+ continue;;
+ esac
+ # The quadruple backslash is collapsed to a double backslash
+ # by the backticks, then collapsed again by the double quotes,
+ # leaving us with one backslash in the sed expression (right
+ # before the dot that mustn't act as a wildcard).
+ cat=`echo $cat | sed -e "s!$srcdir/po/!!" -e "s!\\\\.po!.gmo!"`
+ lang=`echo $cat | sed -e "s!\\\\.gmo!!"`
+ # The user is allowed to set LINGUAS to a list of languages to
+ # install catalogs for. If it's empty that means "all of them."
+ if test "x$LINGUAS" = x; then
+ CATALOGS="$CATALOGS $cat"
+ XLINGUAS="$XLINGUAS $lang"
+ else
+ case "$LINGUAS" in *$lang*)
+ CATALOGS="$CATALOGS $cat"
+ XLINGUAS="$XLINGUAS $lang"
+ ;;
+ esac
+ fi
+ done
+ LINGUAS="$XLINGUAS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LINGUAS" >&5
+$as_echo "$LINGUAS" >&6; }
+
+
+ DATADIRNAME=share
+
+ INSTOBJEXT=.mo
+
+ GENCAT=gencat
+
+ CATOBJEXT=.gmo
+
+fi
+
+# Check for common headers.
+# FIXME: Seems to me this can cause problems for i386-windows hosts.
+# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer to if __STDC__ is defined, since
+ # exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include
+#else
+# include
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+#include
+#include
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in stdlib.h string.h strings.h unistd.h time.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in sys/time.h sys/resource.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in fcntl.h fpu_control.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_header in dlfcn.h errno.h sys/stat.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+for ac_func in getrusage time sigaction __setfpucw
+do :
+ as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+done
+
+
+# Check for socket libraries
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for bind in -lsocket" >&5
+$as_echo_n "checking for bind in -lsocket... " >&6; }
+if test "${ac_cv_lib_socket_bind+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsocket $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char bind ();
+int
+main ()
+{
+return bind ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_socket_bind=yes
+else
+ ac_cv_lib_socket_bind=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_bind" >&5
+$as_echo "$ac_cv_lib_socket_bind" >&6; }
+if test "x$ac_cv_lib_socket_bind" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBSOCKET 1
+_ACEOF
+
+ LIBS="-lsocket $LIBS"
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
+$as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lnsl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char gethostbyname ();
+int
+main ()
+{
+return gethostbyname ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_nsl_gethostbyname=yes
+else
+ ac_cv_lib_nsl_gethostbyname=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
+$as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
+if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBNSL 1
+_ACEOF
+
+ LIBS="-lnsl $LIBS"
+
+fi
+
+
+# BFD conditionally uses zlib, so we must link it in if libbfd does, by
+# using the same condition.
+
+ # See if the user specified whether he wants zlib support or not.
+
+# Check whether --with-zlib was given.
+if test "${with_zlib+set}" = set; then :
+ withval=$with_zlib;
+else
+ with_zlib=auto
+fi
+
+
+ if test "$with_zlib" != "no"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
+$as_echo_n "checking for library containing zlibVersion... " >&6; }
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_func_search_save_LIBS=$LIBS
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char zlibVersion ();
+int
+main ()
+{
+return zlibVersion ();
+ ;
+ return 0;
+}
+_ACEOF
+for ac_lib in '' z; do
+ if test -z "$ac_lib"; then
+ ac_res="none required"
+ else
+ ac_res=-l$ac_lib
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ fi
+ if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_search_zlibVersion=$ac_res
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext
+ if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ break
+fi
+done
+if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+else
+ ac_cv_search_zlibVersion=no
+fi
+rm conftest.$ac_ext
+LIBS=$ac_func_search_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
+$as_echo "$ac_cv_search_zlibVersion" >&6; }
+ac_res=$ac_cv_search_zlibVersion
+if test "$ac_res" != no; then :
+ test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
+ for ac_header in zlib.h
+do :
+ ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_zlib_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_ZLIB_H 1
+_ACEOF
+
+fi
+
+done
+
+fi
+
+ if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
+ as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
+ fi
+ fi
+
+
+. ${srcdir}/../../bfd/configure.host
+
+
+
+USE_MAINTAINER_MODE=no
+# Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; case "${enableval}" in
+ yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
+ no) MAINT="#" ;;
+ *) as_fn_error "\"--enable-maintainer-mode does not take a value\"" "$LINENO" 5; MAINT="#" ;;
+esac
+if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
+ echo "Setting maintainer mode" 6>&1
+fi
+else
+ MAINT="#"
+fi
+
+
+
+# Check whether --enable-sim-bswap was given.
+if test "${enable_sim_bswap+set}" = set; then :
+ enableval=$enable_sim_bswap; case "${enableval}" in
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
+ no) sim_bswap="-DWITH_BSWAP=0";;
+ *) as_fn_error "\"--enable-sim-bswap does not take a value\"" "$LINENO" 5; sim_bswap="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
+ echo "Setting bswap flags = $sim_bswap" 6>&1
+fi
+else
+ sim_bswap=""
+fi
+
+
+
+# Check whether --enable-sim-cflags was given.
+if test "${enable_sim_cflags+set}" = set; then :
+ enableval=$enable_sim_cflags; case "${enableval}" in
+ yes) sim_cflags="-O2 -fomit-frame-pointer";;
+ trace) as_fn_error "\"Please use --enable-sim-debug instead.\"" "$LINENO" 5; sim_cflags="";;
+ no) sim_cflags="";;
+ *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
+ echo "Setting sim cflags = $sim_cflags" 6>&1
+fi
+else
+ sim_cflags=""
+fi
+
+
+
+# Check whether --enable-sim-debug was given.
+if test "${enable_sim_debug+set}" = set; then :
+ enableval=$enable_sim_debug; case "${enableval}" in
+ yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
+ no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
+ *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
+ echo "Setting sim debug = $sim_debug" 6>&1
+fi
+else
+ sim_debug=""
+fi
+
+
+
+# Check whether --enable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then :
+ enableval=$enable_sim_stdio; case "${enableval}" in
+ yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+ no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+ *) as_fn_error "\"Unknown value $enableval passed to --enable-sim-stdio\"" "$LINENO" 5; sim_stdio="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+ echo "Setting stdio flags = $sim_stdio" 6>&1
+fi
+else
+ sim_stdio=""
+fi
+
+
+
+# Check whether --enable-sim-trace was given.
+if test "${enable_sim_trace+set}" = set; then :
+ enableval=$enable_sim_trace; case "${enableval}" in
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ [-0-9]*)
+ sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+ [a-z]*)
+ sim_trace=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_trace" = x; then
+ sim_trace="-DWITH_TRACE='(TRACE_$x"
+ else
+ sim_trace="${sim_trace}|TRACE_$x"
+ fi
+ done
+ sim_trace="$sim_trace)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
+ echo "Setting sim trace = $sim_trace" 6>&1
+fi
+else
+ sim_trace=""
+fi
+
+
+
+# Check whether --enable-sim-profile was given.
+if test "${enable_sim_profile+set}" = set; then :
+ enableval=$enable_sim_profile; case "${enableval}" in
+ yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
+ no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+ [-0-9]*)
+ sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+ [a-z]*)
+ sim_profile=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_profile" = x; then
+ sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+ else
+ sim_profile="${sim_profile}|PROFILE_$x"
+ fi
+ done
+ sim_profile="$sim_profile)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
+ echo "Setting sim profile = $sim_profile" 6>&1
+fi
+else
+ sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"
+fi
+
+
+
+
+# Check whether --with-pkgversion was given.
+if test "${with_pkgversion+set}" = set; then :
+ withval=$with_pkgversion; case "$withval" in
+ yes) as_fn_error "package version not specified" "$LINENO" 5 ;;
+ no) PKGVERSION= ;;
+ *) PKGVERSION="($withval) " ;;
+ esac
+else
+ PKGVERSION="(GDB) "
+
+fi
+
+
+
+
+
+# Check whether --with-bugurl was given.
+if test "${with_bugurl+set}" = set; then :
+ withval=$with_bugurl; case "$withval" in
+ yes) as_fn_error "bug URL not specified" "$LINENO" 5 ;;
+ no) BUGURL=
+ ;;
+ *) BUGURL="$withval"
+ ;;
+ esac
+else
+ BUGURL="http://www.gnu.org/software/gdb/bugs/"
+
+fi
+
+ case ${BUGURL} in
+ "")
+ REPORT_BUGS_TO=
+ REPORT_BUGS_TEXI=
+ ;;
+ *)
+ REPORT_BUGS_TO="<$BUGURL>"
+ REPORT_BUGS_TEXI=@uref{`echo "$BUGURL" | sed 's/@/@@/g'`}
+ ;;
+ esac;
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define PKGVERSION "$PKGVERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define REPORT_BUGS_TO "$REPORT_BUGS_TO"
+_ACEOF
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking return type of signal handlers" >&5
+$as_echo_n "checking return type of signal handlers... " >&6; }
+if test "${ac_cv_type_signal+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include
+#include
+
+int
+main ()
+{
+return *(signal (0, 0)) (0) == 1;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_type_signal=int
+else
+ ac_cv_type_signal=void
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_type_signal" >&5
+$as_echo "$ac_cv_type_signal" >&6; }
+
+cat >>confdefs.h <<_ACEOF
+#define RETSIGTYPE $ac_cv_type_signal
+_ACEOF
+
+
+
+
+
+sim_link_files=
+sim_link_links=
+
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+ sim_link_files=tconfig.in
+else
+ sim_link_files=../common/tconfig.in
+fi
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+
+for ac_header in stdlib.h time.h sys/param.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+ac_sources="$sim_link_files"
+ac_dests="$sim_link_links"
+while test -n "$ac_sources"; do
+ set $ac_dests; ac_dest=$1; shift; ac_dests=$*
+ set $ac_sources; ac_source=$1; shift; ac_sources=$*
+ ac_config_links_1="$ac_config_links_1 $ac_dest:$ac_source"
+done
+ac_config_links="$ac_config_links $ac_config_links_1"
+
+cgen_breaks=""
+if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
+cgen_breaks="break cgen_rtx_error";
+fi
+
+ac_config_files="$ac_config_files Makefile.sim:Makefile.in"
+
+ac_config_files="$ac_config_files Make-common.sim:../common/Make-common.in"
+
+ac_config_files="$ac_config_files .gdbinit:../common/gdbinit.in"
+
+ac_config_commands="$ac_config_commands Makefile"
+
+ac_config_commands="$ac_config_commands stamp-h"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by $as_me, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_links="$ac_config_links"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration links:
+$config_links
+
+Configuration commands:
+$config_commands
+
+Report bugs to the package provider."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+config.status
+configured by $0, generated by GNU Autoconf 2.64,
+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h:config.in" ;;
+ "$ac_config_links_1") CONFIG_LINKS="$CONFIG_LINKS $ac_config_links_1" ;;
+ "Makefile.sim") CONFIG_FILES="$CONFIG_FILES Makefile.sim:Makefile.in" ;;
+ "Make-common.sim") CONFIG_FILES="$CONFIG_FILES Make-common.sim:../common/Make-common.in" ;;
+ ".gdbinit") CONFIG_FILES="$CONFIG_FILES .gdbinit:../common/gdbinit.in" ;;
+ "Makefile") CONFIG_COMMANDS="$CONFIG_COMMANDS Makefile" ;;
+ "stamp-h") CONFIG_COMMANDS="$CONFIG_COMMANDS stamp-h" ;;
+
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_LINKS+set}" = set || CONFIG_LINKS=$config_links
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' >$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' >$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :L $CONFIG_LINKS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error "could not create -" "$LINENO" 5
+ fi
+ ;;
+ :L)
+ #
+ # CONFIG_LINK
+ #
+
+ if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
+ :
+ else
+ # Prefer the file from the source tree if names are identical.
+ if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
+ ac_source=$srcdir/$ac_source
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
+$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}
+
+ if test ! -r "$ac_source"; then
+ as_fn_error "$ac_source: file not found" "$LINENO" 5
+ fi
+ rm -f "$ac_file"
+
+ # Try a relative symlink, then a hard link, then a copy.
+ case $srcdir in
+ [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
+ *) ac_rel_source=$ac_top_build_prefix$ac_source ;;
+ esac
+ ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
+ ln "$ac_source" "$ac_file" 2>/dev/null ||
+ cp -p "$ac_source" "$ac_file" ||
+ as_fn_error "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
+ fi
+ ;;
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "Makefile":C) echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
+ rm -f Makesim1.tmp Makesim2.tmp Makefile
+ sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' Makesim1.tmp
+ sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' Makesim2.tmp
+ sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
+ -e '/^## COMMON_POST_/ r Makesim2.tmp' \
+ Makefile
+ rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
+ ;;
+ "stamp-h":C) echo > stamp-h ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 842)
@@ -0,0 +1,37 @@
+# Makefile template for Configure for the h8300 sim library.
+# Copyright (C) 1990, 91, 92, 95, 96, 1997, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
+# Written by Cygnus Support.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see .
+
+## COMMON_PRE_CONFIG_FRAG
+
+# List of main object files for `run'.
+SIM_RUN_OBJS = nrun.o
+
+SIM_OBJS = compile.o \
+ $(SIM_NEW_COMMON_OBJS) \
+ sim-cpu.o \
+ sim-engine.o \
+ sim-load.o \
+ $(SIM_EXTRA_OBJS)
+
+## COMMON_POST_CONFIG_FRAG
+
+compile.o: compile.c inst.h config.h \
+ $(srcdir)/../../include/gdb/sim-h8300.h \
+ $(srcdir)/../../include/opcode/h8300.h \
+ $(srcdir)/../../include/gdb/remote-sim.h \
+ $(srcdir)/../../include/gdb/callback.h
Index: configure.ac
===================================================================
--- configure.ac (nonexistent)
+++ configure.ac (revision 842)
@@ -0,0 +1,14 @@
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.59)dnl
+AC_INIT(Makefile.in)
+AC_CONFIG_HEADER(config.h:config.in)
+
+sinclude(../common/aclocal.m4)
+
+# Bugs in autoconf 2.59 break the call to SIM_AC_COMMON, hack around
+# it by inlining the macro's contents.
+sinclude(../common/common.m4)
+
+AC_CHECK_HEADERS(stdlib.h time.h sys/param.h)
+
+SIM_AC_OUTPUT
configure.ac
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: inst.h
===================================================================
--- inst.h (nonexistent)
+++ inst.h (revision 842)
@@ -0,0 +1,98 @@
+#define DEBUG
+
+/* These define the size of main memory for the simulator.
+
+ Note the size of main memory for the H8/300H is only 256k. Keeping it
+ small makes the simulator run much faster and consume less memory.
+
+ The linker knows about the limited size of the simulator's main memory
+ on the H8/300H (via the h8300h.sc linker script). So if you change
+ H8300H_MSIZE, be sure to fix the linker script too.
+
+ Also note that there's a separate "eightbit" area aside from main
+ memory. For simplicity, the simulator assumes any data memory reference
+ outside of main memory refers to the eightbit area (in theory, this
+ can only happen when simulating H8/300H programs). We make no attempt
+ to catch overlapping addresses, wrapped addresses, etc etc. */
+#define H8300_MSIZE (1 << 16)
+
+/* avolkov:
+ Next 2 macros are ugly for any workstation, but while they're work.
+ Memory size MUST be configurable. */
+#define H8300H_MSIZE (1 << 18)
+#define H8300S_MSIZE (1 << 24)
+
+#define CSIZE 1000
+
+/* Local register names */
+typedef enum
+{
+ R0, R1, R2, R3, R4, R5, R6, R7,
+ R_ZERO,
+ R_PC,
+ R_CCR,
+ R_EXR,
+ R_HARD_0,
+ R_LAST,
+} reg_type;
+
+
+/* Structure used to describe addressing */
+
+typedef struct
+{
+ int type;
+ int reg;
+ int literal;
+} ea_type;
+
+
+
+typedef struct
+{
+ ea_type src;
+ ea_type dst;
+ int opcode;
+ int next_pc;
+ int oldpc;
+ int cycles;
+#ifdef DEBUG
+struct h8_opcode *op;
+#endif
+}
+decoded_inst;
+
+enum h8300_sim_state {
+ SIM_STATE_RUNNING, SIM_STATE_EXITED, SIM_STATE_SIGNALLED, SIM_STATE_STOPPED
+};
+
+/* For Command Line. */
+char **ptr_command_line; /* Pointer to Command Line Arguments. */
+
+typedef struct
+{
+ enum h8300_sim_state state;
+ int exception;
+ unsigned int regs[9];
+ int pc;
+ int ccr;
+ int exr;
+
+ unsigned char *memory;
+ unsigned char *eightbit;
+ unsigned short *cache_idx;
+ int cache_top;
+ int maximum;
+ int csize;
+ int mask;
+
+ decoded_inst *cache;
+ int cycles;
+ int insts;
+ int ticks;
+ int compiles;
+#ifdef ADEBUG
+ int stats[O_LAST];
+#endif
+}
+cpu_state_type;
inst.h
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: writecode.c
===================================================================
--- writecode.c (nonexistent)
+++ writecode.c (revision 842)
@@ -0,0 +1,1033 @@
+/* Code generator for the Hitachi H8/300 architecture simulator.
+
+ Written by Steve Chamberlain of Cygnus Support.
+ sac@cygnus.com
+
+ This file is part of H8/300 sim
+
+
+ THIS SOFTWARE IS NOT COPYRIGHTED
+
+ Cygnus offers the following for use in the public domain. Cygnus
+ makes no warranty with regard to the software or it's performance
+ and the user accepts the software "AS IS" with all faults.
+
+ CYGNUS DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD TO
+ THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+*/
+
+/* This program reads the H8/300 opcode table and writes out
+ a large switch statement to understand the opcodes (with ifs if
+ there is more than one opcode per case) and code to do the stuff */
+
+#include
+
+#define DEFINE_TABLE
+#define INSIM
+#include"opcode/h8300.h"
+
+#define MAXSAME 140
+
+#define PTWO 256
+static struct h8_opcode *h8_opcodes_sorted[PTWO][MAXSAME];
+
+char *cs = "/*";
+char *ce = "*/";
+
+/* How to get at nibble n from the instruction */
+char *nibs[] =
+{
+ "foo",
+ "(b0&0xf)",
+ "((b1>>4)&0xf)",
+ "((b1)&0xf)",
+ "((pc[1]>>12)&0xf)",
+ "((pc[1]>>8)&0xf)",
+ "((pc[1]>>4)&0xf)",
+ "((pc[1])&0xf)",
+ 0, 0};
+
+/* how to get at the 3 bit immediate in the instruction */
+char *imm3[] =
+{"foo",
+ "foo",
+ "((b1>>4)&0x7)",
+ "foo",
+ "foo",
+ "foo",
+ "(pc[1]>>4)&0x7"};
+
+/* How to get at a byte register from an index in the instruction at
+ nibble n */
+char *breg[] =
+{"foo",
+ "*(blow[b0])",
+ "*(bhigh[b1])",
+ "*(blow[b1])",
+ 0, 0,
+ "*(bhigh[pc[1]>>8])"};
+
+/* How to get at a word register from an index in the instruction at
+ nibble n */
+
+char *wreg[] =
+{"foo",
+ "*(wlow[b0])",
+ "*(whigh[b1])",
+ "*(wlow[b1])"};
+
+#define sorted_key noperands
+
+/* sort the opcode table into h8_opcodes_sorted[0..255] */
+static void
+init ()
+{
+ unsigned int i;
+ struct h8_opcode *p;
+
+ for (p = h8_opcodes; p->name; p++)
+ {
+ int n1 = 0;
+ int n2 = 0;
+ int j;
+#if 0
+ for (j = 0; p->data.nib[j] != E; j++)
+ {
+ if ((int) p->data.nib[j] == ABS16ORREL8SRC)
+ p->data.nib[j] = ABS16SRC;
+ if ((int) p->data.nib[j] == ABS16OR8SRC)
+ p->data.nib[j] = ABS16SRC;
+ if ((int) p->data.nib[j] == ABS16OR8DST)
+ p->data.nib[j] = ABS16DST;
+ }
+#endif
+
+ if ((int) p->data.nib[0] < 16)
+ {
+ n1 = (int) p->data.nib[0];
+ }
+ else
+ n1 = 0;
+ if ((int) p->data.nib[1] < 16)
+ {
+ n2 = (int) p->data.nib[1];
+ }
+ else
+ n2 = 0;
+ for (i = 0; i < MAXSAME; i++)
+ {
+ int j = /* ((n3 >> 3) * 512) + ((n4 >> 3) * 256) + */ n1 * 16 + n2;
+
+ if (h8_opcodes_sorted[j][i] == (struct h8_opcode *) NULL)
+ {
+ h8_opcodes_sorted[j][i] = p;
+ p->sorted_key = j;
+ break;
+ }
+ }
+
+ if (i == MAXSAME)
+ abort ();
+
+ /* Just make sure there are an even number of nibbles in it, and
+ that the count is the same s the length */
+ for (i = 0; p->data.nib[i] != E; i++)
+ /*EMPTY*/ ;
+ if (i & 1)
+ abort ();
+ p->length = i / 2;
+ }
+ for (i = 0; i < PTWO; i++)
+ {
+ if (h8_opcodes_sorted[i][0])
+ p = h8_opcodes_sorted[i][0];
+ else
+ h8_opcodes_sorted[i][0] = p;
+ }
+}
+
+/* decode the lvalues, creating a pointer in real space to object -
+ remember if the thing has to be swapped out of where it is */
+
+
+int swap[2];
+
+lval (p)
+ struct h8_opcode *p;
+{
+ int i;
+
+ for (i = 0; p->data.nib[i] != E; i++)
+ {
+ int x = p->data.nib[i];
+ int size;
+ int op;
+ op = (x & DST) ? 1 : 0;
+
+ switch (x & SIZE)
+ {
+ case L_32:
+ size = 32;
+ break;
+ case L_16:
+ size = 16;
+ break;
+ case L_8:
+ size = 8;
+ break;
+ default:
+ size = 1234;
+ }
+
+ if (x & REG)
+ {
+ printf ("ir%d = GET_LVAL_%d_REG(%d);\n", op, size, i);
+ }
+ else if (x & IMM)
+ {
+ printf ("/* Imm has no lvalue */\n");
+ }
+
+ }
+
+
+
+}
+
+void
+decode (p, fetch, size)
+ struct h8_opcode *p;
+ int fetch;
+ int size;
+{
+ if (fetch)
+ {
+ lval (p);
+ }
+
+}
+
+
+
+static void
+esleep ()
+{
+ printf ("saved_state.exception = SIGSTOP;\n");
+}
+
+static void
+mov (p, s, sz)
+ struct h8_opcode *p;
+ char *s;
+ int sz;
+{
+ printf ("dst = srca;\n");
+}
+
+static void
+andc (p)
+ struct h8_opcode *p;
+{
+ printf ("SET_CCR(GET_CCR() & srca);\n");
+}
+
+static void
+addx (p)
+ struct h8_opcode *p;
+{
+ printf ("dst = srca + srcb+ (c != 0);\n");
+}
+
+static void
+subx (p)
+ struct h8_opcode *p;
+{
+ printf ("dst = srcb - srca - (c != 0);\n");
+}
+
+static void
+add (p, s, sz)
+ struct h8_opcode *p;
+ char *s;
+ int sz;
+{
+ printf ("%s;\n", s);
+}
+
+static void
+adds (p, s)
+ struct h8_opcode *p;
+ char *s;
+{
+ printf ("%s;\n", s);
+}
+
+static void
+bra (p, a)
+ struct h8_opcode *p;
+ char *a;
+{
+ printf ("if (%s) npc += ((char )b1)>>1;\n", a);
+}
+
+static void
+bsr (p, a)
+ struct h8_opcode *p;
+ char *a;
+{
+ printf ("reg[7]-=2;\n");
+ printf ("tmp = reg[7];\n");
+ printf ("SET_WORD_MEM(tmp, (npc-saved_state.mem)*2);\n");
+ printf ("npc += ((char)b1)>>1;\n");
+}
+
+static void
+cmp (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ decode (p, 1, s);
+ printf ("srca = -srca;\n");
+ printf ("dst = srca + srcb;\n");
+}
+
+static
+void
+jsr (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("if (b1 == 0xc4) {\n");
+ printf ("printf(\"%%c\", reg[2]);\n");
+ printf ("}\n");
+ printf ("else {\n");
+ printf ("reg[7]-=2;\n");
+ printf ("tmp = reg[7];\n");
+ printf ("SET_WORD_MEM(tmp, (npc-saved_state.mem)*2);\n");
+ printf ("npc = (lval>>1) + saved_state.mem;\n");
+ printf ("}");
+}
+
+static void
+jmp (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("npc = (lval>>1) + saved_state.mem;\n");
+}
+
+static void
+rts (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("tmp = reg[7];\n");
+ printf ("reg[7]+=2;\n");
+ printf ("npc = saved_state.mem + (WORD_MEM(tmp)>>1);\n");
+}
+
+static void
+rte (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("reg[7]+=2;\n");
+ printf ("tmp = reg[7];\n");
+ printf ("reg[7]+=2;\n");
+ printf ("SET_CCR(tmp);\n");
+ printf ("npc = saved_state.mem + (WORD_MEM(tmp)>>1);\n");
+}
+
+static void
+setf (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("tmp = GET_CCR();\n");
+ printf ("tmp %s= srca;\n", a);
+}
+
+static void
+bpt (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("saved_state.exception = SIGTRAP;\n");
+ printf ("npc = pc;\n");
+}
+
+static void
+log (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("dst = srcb %s srca;\n", a);
+}
+
+static void
+ulog (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("dst = %s srcb ;\n", a);
+}
+
+static void
+nop ()
+{
+}
+
+static void
+rotl ()
+{
+ printf ("c = srcb & 0x80;\n");
+ printf ("dst = srcb << 1;\n");
+ printf ("if (c) dst|=1;\n");
+}
+
+static void
+rotr ()
+{
+ printf ("c = srcb & 1;\n");
+ printf ("dst = srcb >> 1;\n");
+ printf ("if (c) dst|=0x80;\n");
+}
+
+static void
+rotxl ()
+{
+ printf ("tmp = srcb & 0x80;\n");
+ printf ("dst = srcb << 1;\n");
+ printf ("if (c) dst|=1;\n");
+ printf ("c = tmp;\n");
+}
+
+static void
+rotxr ()
+{
+ printf ("tmp = srcb & 1;\n");
+ printf ("dst = srcb >> 1;\n");
+ printf ("if (c) dst|=0x80;\n");
+ printf ("c = tmp;\n");
+}
+
+static void
+shal ()
+{
+ printf ("c = srcb&0x80;\n");
+ printf ("dst = srcb << 1;\n");
+}
+
+static
+void
+shar ()
+{
+ printf ("c = srcb&0x1;\n");
+ printf ("if (srcb&0x80) dst = (srcb>>1) | 0x80;\n");
+ printf ("else dst = (srcb>>1) &~ 0x80;\n");
+}
+
+static
+void
+shll ()
+{
+ printf ("c = srcb&0x80;\n");
+ printf ("dst = srcb << 1;\n");
+}
+
+static
+void
+shlr ()
+{
+ printf ("c = srcb&0x1;\n");
+ printf ("dst = (srcb>>1) &~ 0x80;\n");
+}
+
+static
+void
+divxu ()
+{
+ printf ("srca = %s;\n", breg[2]);
+ printf ("srcb = %s;\n", wreg[3]);
+ printf ("n = srca & 0x80;\n");
+ printf ("z = !srca;\n");
+ printf ("if (srca) dst = srcb / srca;tmp = srcb %% srca;\n");
+ printf ("%s = (dst & 0xff) | (tmp << 8);\n", wreg[3]);
+}
+
+static
+void
+mulxu ()
+{
+ printf ("srca = %s;\n", breg[2]);
+ printf ("srcb = %s;\n", wreg[3]);
+
+ printf ("dst = (srcb&0xff) * srca;\n");
+ printf ("%s = dst;\n", wreg[3]);
+}
+
+static
+void
+inc ()
+{
+ printf ("dst = %s;\n", breg[3]);
+ printf ("v = (dst==0x7f);\n");
+ printf ("dst++;\n");
+ printf ("%s= dst;\n", breg[3]);
+}
+
+static
+void
+bit (p, a, s)
+ struct h8_opcode *p;
+ char *a;
+ int s;
+{
+ printf ("%s\n", a);
+}
+
+static
+void
+dec ()
+{
+ printf ("dst = %s;\n", breg[3]);
+ printf ("v = (dst==0x80);\n");
+ printf ("dst--;\n");
+ printf ("%s = dst;\n", breg[3]);
+}
+
+char saf[] = "goto setflags;";
+char sf[] = "goto shiftflags;";
+char af8[] = "goto aluflags8;";
+char af16[] = "goto aluflags16;";
+char lf[] = "goto logflags;";
+char icf[] = "goto incflags;";
+char mf8[] = "goto movflags8;";
+char mf16[] = "goto movflags16;";
+char nx[] = "goto next;";
+
+struct
+{
+ char *ftype;
+ int decode;
+ char *name;
+ void (*func) ();
+ char *arg;
+ int size;
+
+}
+
+table[] =
+{
+ {
+ nx, 1, "bld", bit, "dst = srcb; c = (srcb>>srca)&1;", 8
+ }
+ ,
+ {
+ nx, 1, "bild", bit, "dst = srcb; c = !((srcb>>srca)&1);", 8
+ }
+ ,
+ {
+ nx, 1, "band", bit, "dst = srcb; c = C &&((srcb>>srca)&1);", 8
+ }
+ ,
+ {
+ nx, 1, "biand", bit, "dst = srcb; c = C &&(!((srcb>>srca)&1));", 8
+ }
+ ,
+ {
+ nx, 1, "bior", bit, "dst = srcb; c = C ||(!((srcb>>srca)&1));", 8
+ }
+ ,
+ {
+ nx, 1, "bor", bit, "dst = srcb; c = C ||(((srcb>>srca)&1));", 8
+ }
+ ,
+ {
+ nx, 1, "bixor", bit, "dst = srcb; c = C ^(!((srcb>>srca)&1));", 8
+ }
+ ,
+ {
+ nx, 1, "bxor", bit, "dst = srcb; c = C ^(((srcb>>srca)&1));", 8
+ }
+ ,
+ {
+ nx, 1, "bnot", bit, "dst = srcb ^ (1<>srca)&1);", 8
+ }
+ ,
+ {
+ icf, 0, "dec", dec, 0, 0
+ }
+ ,
+ {
+ icf, 0, "inc", inc, 0, 0
+ }
+ ,
+ {
+ saf, 1, "orc", setf, "|", 0
+ }
+ ,
+ {
+ saf, 1, "xorc", setf, "^", 0
+ }
+ ,
+ {
+ saf, 1, "andc", setf, "&", 0
+ }
+ ,
+ {
+ nx, 1, "nop", nop, 0, 0
+ }
+ ,
+ {
+ nx, 1, "bra", bra, "1", 0
+ }
+ ,
+ {
+ nx, 1, "brn", bra, "0", 0
+ }
+ ,
+ {
+ nx, 1, "bhi", bra, "(C||Z)==0", 0
+ }
+ ,
+ {
+ nx, 1, "bls", bra, "(C||Z)==1", 0
+ }
+ ,
+ {
+ nx, 1, "bcs", bra, "C==1", 0
+ }
+ ,
+ {
+ nx, 1, "bcc", bra, "C==0", 0
+ }
+ ,
+ {
+ nx, 1, "bpl", bra, "N==0", 0
+ }
+ ,
+ {
+ nx, 1, "bmi", bra, "N==1", 0
+ }
+ ,
+ {
+ nx, 1, "bvs", bra, "V==1", 0
+ }
+ ,
+ {
+ nx, 1, "bvc", bra, "V==0", 0
+ }
+ ,
+ {
+ nx, 1, "bge", bra, "(N^V)==0", 0
+ }
+ ,
+ {
+ nx, 1, "bgt", bra, "(Z|(N^V))==0", 0
+ }
+ ,
+ {
+ nx, 1, "blt", bra, "(N^V)==1", 0
+ }
+ ,
+ {
+ nx, 1, "ble", bra, "(Z|(N^V))==1", 0
+ }
+ ,
+ {
+ nx, 1, "beq", bra, "Z==1", 0
+ }
+ ,
+ {
+ nx, 1, "bne", bra, "Z==0", 0
+ }
+ ,
+ {
+ nx, 1, "bsr", bsr, "", 0
+ }
+ ,
+ {
+ nx, 1, "jsr", jsr, 0, 0
+ }
+ ,
+ {
+ nx, 1, "jmp", jmp, 0, 0
+ }
+ ,
+ {
+ nx, 0, "rts", rts, 0, 0
+ }
+ ,
+ {
+ nx, 0, "rte", rte, 0, 0
+ }
+ ,
+ {
+ nx, 1, "andc", andc, 0, 0
+ }
+ ,
+ {
+ sf, 1, "shal", shal, 0, 0
+ }
+ ,
+ {
+ sf, 1, "shar", shar, 0, 0
+ }
+ ,
+ {
+ sf, 1, "shll", shll, 0, 0
+ }
+ ,
+ {
+ sf, 1, "shlr", shlr, 0, 0
+ }
+ ,
+ {
+ sf, 1, "rotxl", rotxl, 0, 0
+ }
+ ,
+ {
+ sf, 1, "rotxr", rotxr, 0, 0
+ }
+ ,
+ {
+ sf, 1, "rotl", rotl, 0, 0
+ }
+ ,
+ {
+ sf, 1, "rotr", rotr, 0, 0
+ }
+ ,
+ {
+ lf, 1, "xor", log, "^", 0
+ }
+ ,
+ {
+ lf, 1, "and", log, "&", 0
+ }
+ ,
+ {
+ lf, 1, "or", log, "|", 0
+ }
+ ,
+ {
+ lf, 1, "not", ulog, " ~", 0
+ }
+ ,
+ {
+ lf, 1, "neg", ulog, " - ", 0
+ }
+ ,
+ {
+ nx, 1, "adds", adds, "dst = srca + srcb", 0
+ }
+ ,
+ {
+ nx, 1, "subs", adds, "srca = -srca; dst = srcb + srca", 0
+ }
+ ,
+ {
+ af8, 1, "add.b", add, "dst = srca + srcb", 8
+ }
+ ,
+ {
+ af16, 1, "add.w", add, "dst = srca + srcb", 16
+ }
+ ,
+ {
+ af16, 1, "sub.w", add, "srca = -srca; dst = srcb + srca", 16
+ }
+ ,
+ {
+ af8, 1, "sub.b", add, "srca = -srca; dst = srcb + srca", 8
+ }
+ ,
+ {
+ af8, 1, "addx", addx, 0, 8
+ }
+ ,
+ {
+ af8, 1, "subx", subx, 0, 8
+ }
+ ,
+ {
+ af8, 0, "cmp.b", cmp, 0, 8
+ }
+ ,
+ {
+ af16, 0, "cmp.w", cmp, 0, 16
+ }
+ ,
+ {
+ nx, 1, "sleep", esleep, 0, 0
+ }
+ ,
+ {
+ nx, 0, "bpt", bpt, 0, 8
+ }
+ ,
+ {
+ nx, 0, "divxu", divxu, 0, 0
+ }
+ ,
+ {
+ nx, 0, "mulxu", mulxu, 0, 0
+ }
+ ,
+ {
+ mf8, 1, "mov.b", mov, 0, 8
+ }
+ ,
+ {
+ mf8, 1, "movtpe", mov, 0, 8
+ }
+ ,
+ {
+ mf8, 1, "movfpe", mov, 0, 8
+ }
+ ,
+ {
+ mf16, 1, "mov.w", mov, 0, 16
+ }
+ ,
+ {
+ 0
+ }
+};
+
+static
+void
+edo (p)
+ struct h8_opcode *p;
+{
+ int i;
+
+ printf ("%s %s %s\n", cs, p->name, ce);
+
+ for (i = 0; table[i].name; i++)
+ {
+ if (strcmp (table[i].name, p->name) == 0)
+ {
+ printf ("{\n");
+ if (table[i].decode)
+ decode (p, 1, table[i].size);
+ printf ("cycles += %d;\n", p->time);
+ printf ("npc = pc + %d;\n", p->length / 2);
+ table[i].func (p, table[i].arg, table[i].size);
+ if (table[i].decode)
+ decode (p, 0, table[i].size);
+ if (table[i].ftype)
+ printf (table[i].ftype);
+ else
+ printf ("goto next;\n");
+ printf ("}\n");
+ return;
+ }
+ }
+ printf ("%s not found %s\n", cs, ce);
+ printf ("saved_state.exception = SIGILL;\n");
+ printf ("break;\n");
+}
+
+static
+int
+owrite (i)
+ int i;
+{
+ /* write if statements to select the right opcode */
+ struct h8_opcode **p;
+ int needand = 1;
+
+ p = h8_opcodes_sorted[i];
+ printf ("case 0x%03x:\n", i);
+
+ if (p[1] == 0)
+ {
+ /* See if the next few also match */
+ while (h8_opcodes_sorted[i + 1][0] == *p)
+ {
+ i++;
+ printf ("case 0x%03x:\n", i);
+ }
+
+ /* Don't need any if's this is the only one */
+ edo (*p);
+ }
+ else
+ {
+ while (*p)
+ {
+ /* start two nibbles in since we know we match in the first byte */
+ int c;
+ int nib = 2;
+ int byte = 1;
+ int mask1[5];
+ int mask0[5];
+ int nibshift = 4;
+ int any = 0;
+
+ for (c = 0; c < 5; c++)
+ {
+ mask1[c] = 0;
+ mask0[c] = 0;
+ }
+ printf ("%s %x%x", cs, (*p)->data.nib[0], (*p)->data.nib[1]);
+ while ((c = (*p)->data.nib[nib]) != E)
+ {
+ if (c & B30)
+ {
+ /* bit 3 must be zero */
+ mask0[byte] |= 0x8 << nibshift;
+ printf ("0");
+ any = 1;
+ }
+ else if (c & B31)
+ {
+ /* bit 3 must be one */
+ mask1[byte] |= 0x8 << nibshift;
+ printf ("8");
+ any = 1;
+ }
+ else if (c <= HexF)
+ {
+ mask0[byte] |= ((~c) & 0xf) << nibshift;
+ mask1[byte] |= (c & 0xf) << nibshift;
+ printf ("%x", c);
+ any = 1;
+ }
+ else
+ {
+ printf ("x");
+ }
+ nib++;
+ if (nibshift == 4)
+ {
+ nibshift = 0;
+ }
+ else
+ {
+ byte++;
+ nibshift = 4;
+ }
+ }
+ printf ("*/\n");
+ if (any)
+ {
+ printf ("if (");
+ needand = 0;
+ for (c = 1; c < byte; c++)
+ {
+ if (mask0[c] | mask1[c])
+ {
+ int sh;
+
+ if (needand)
+ printf ("\n&&");
+ if (c & 1)
+ sh = 0;
+ else
+ sh = 8;
+ if (c / 2 == 0 && sh == 0)
+ printf ("((b1&0x%x)==0x%x)", mask0[c] | mask1[c],
+ mask1[c]);
+ else
+ {
+ printf ("((pc[%d]&(0x%02x<<%d))==(0x%x<<%d))",
+ c / 2, mask0[c] | mask1[c], sh,
+ mask1[c], sh);
+ }
+
+ needand = 1;
+ }
+ }
+ printf (")\n");
+ }
+ edo (*p);
+ p++;
+
+ }
+ }
+ return i;
+}
+
+static
+void
+remove_dups ()
+{
+ struct h8_opcode *s;
+ struct h8_opcode *d;
+
+ for (d = s = h8_opcodes; s->name; s++)
+ {
+ int doit = 1;
+
+ if (strcmp (s->name, "push") == 0)
+ doit = 0;
+ if (strcmp (s->name, "bhs") == 0)
+ doit = 0;
+ if (strcmp (s->name, "blo") == 0)
+ doit = 0;
+ if (strcmp (s->name, "bt") == 0)
+ doit = 0;
+ if (strcmp (s->name, "bf") == 0)
+ doit = 0;
+ if (strcmp (s->name, "pop") == 0)
+ doit = 0;
+ if (doit)
+ {
+ *d++ = *s;
+ }
+ }
+ *d++ = *s++;
+}
+
+int
+main ()
+{
+ int i;
+
+ remove_dups ();
+ init ();
+
+ printf ("%s do the operation %s\n", cs, ce);
+ printf ("switch (b0) \n{\n");
+ for (i = 0; i < PTWO; i++)
+ {
+ i = owrite (i);
+ }
+ printf ("}\n");
+
+ return 0;
+}
writecode.c
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: ChangeLog
===================================================================
--- ChangeLog (nonexistent)
+++ ChangeLog (revision 842)
@@ -0,0 +1,930 @@
+2010-01-09 Ralf Wildenhues
+
+ * configure: Regenerate.
+
+2009-12-09 Yoshinori Sato
+ * compile.c(fetch_1): Fix pre-dec, pre-inc, post-dec and post-inc.
+ Index registers not masked memory areas.
+ Only simply increment or decrement.
+ * compile.c(store_1): Ditto.
+
+2009-08-22 Ralf Wildenhues
+
+ * config.in: Regenerate.
+ * configure: Likewise.
+
+ * configure: Regenerate.
+
+2008-12-01 Joel Sherrill
+
+ * compile.c: Add const to remove warning.
+
+2008-07-11 Hans-Peter Nilsson
+
+ * configure: Regenerate to track ../common/common.m4 changes.
+ * config.in: Ditto.
+
+2008-06-06 Vladimir Prus
+ Daniel Jacobowitz
+ Joseph Myers
+
+ * configure: Regenerate.
+
+2007-07-03 Yoshinori Sato
+
+ * compile.c (sim_resume): Fix the last byte of ARGV for
+ SYS_CMDLINE.
+
+2006-12-21 Hans-Peter Nilsson
+
+ * acconfig.h: Remove.
+ * config.in: Regenerate.
+
+2006-07-13 Yoshinori Sato
+
+ * compile.c (OBITOP): Bit address mask low three bit.
+ * compile.c (decode): Fix warning.
+
+2006-06-13 Richard Earnshaw
+
+ * configure: Regenerated.
+
+2006-06-05 Daniel Jacobowitz
+
+ * configure: Regenerated.
+
+2006-05-31 Daniel Jacobowitz
+
+ * configure: Regenerated.
+
+2005-03-23 Mark Kettenis
+
+ * configure: Regenerate.
+
+2005-01-14 Andrew Cagney
+
+ * configure.ac: Sinclude aclocal.m4 before common.m4. Add
+ explicit call to AC_CONFIG_HEADER.
+ * configure: Regenerate.
+
+2005-01-12 Andrew Cagney
+
+ * configure.ac: Update to use ../common/common.m4.
+ * configure: Re-generate.
+
+2005-01-11 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2005-01-07 Andrew Cagney
+
+ * configure.ac: Rename configure.in, require autoconf 2.59.
+ * configure: Re-generate.
+
+2004-12-08 Hans-Peter Nilsson
+
+ * configure: Regenerate for ../common/aclocal.m4 update.
+
+2004-06-28 Alexandre Oliva
+
+ 2003-07-23 Richard Sandiford
+ * compile.c (sim_resume): Make sure that dst.reg refers to the
+ right register byte in mova/sz.l @(dd,RnL),ERn.
+ 2003-07-21 Richard Sandiford
+ * compile.c (sim_resume): Zero-extend immediate to muls, mulsu,
+ mulxs, divs and divxs.
+
+ * compile.c (sim_load): Update sd->memory_size.
+
+2004-06-10 Michael Snyder
+
+ Patch submitted by Nitin Yewale .
+ * compile.c (sim_resume): Corrected ANDC operation on EXR for H8S.
+
+2004-01-05 Michael Snyder
+
+ * compile.c (sim_load): Don't pass a type to bfd_openr.
+
+2003-12-16 Michael Snyder
+
+ Patch submitted by Anil Paranjape
+ * sim-main.h (H8300H_MSIZE): Increase from 18 bits to 24 bits.
+
+2003-12-11 Dhananjay Deshpande
+
+ * compile.c (set_h8300h): Initialize globals to zero.
+
+2003-10-17 Shrinivas Atre
+
+ * compile.c (h8300_normal_mode): New.
+ (SP): Handle normal mode.
+ (bitfrom): Use normal mode flag to return suitable value.
+ (lvalue): Use normal mode flag to return command line location.
+ (decode): Decode instruction correctly for normal mode.
+ (init_pointers): Initialise memory correctly for normal mode.
+ (sim_resume): Handle cases for normal mode using h8300_normal_mode
+ flag.
+ (sim_store_register): Handle 2 byte PC for normal mode.
+ (sim_fetch_register): Handle 2 byte PC for normal mode.
+ (set_h8300h): Set normal mode flag as per architechture.
+ (sim_load): Allocate 64K for normal mode instead of bigger memory.
+
+2003-07-18 Michael Snyder
+
+ * compile.c (decode): Enhancements for mova.
+ Initialize cst, reg, and rdisp inside the loop, for each
+ new instruction. Defer correction of the disp2 values until
+ later, and then adjust them by the size of the first operand,
+ rather than the size of the instruction.
+ (sim_resume): For mova, adjust the size of the second operand
+ according to the type of the first operand (INDEXB vs. INDEXW).
+ In cases where there is only one operand, the other two must
+ both be composed on the fly.
+
+2003-07-22 Michael Snyder
+
+ * compile.c (sim_resume): Revert 6-24 change, it does not
+ work with gdb breakpoints.
+
+2003-07-17 Michael Snyder
+
+ * compile.c (sim_resume): Handle shll reg, reg and shlr reg, reg.
+ (decode): IMM16 is always zero-extended.
+
+2003-06-24 Michael Snyder
+
+ * sim-main.h (SIM_WIFSTOPPED, SIM_WSTOPSIG): Define.
+ * compile.c (sim_resume): Use the above to return stop signal.
+
+2003-06-18 Michael Snyder
+
+ * compile.c: Replace "Hitachi" with "Renesas".
+ (decode): Distinguish AV_H8S from AV_H8H.
+ (sim_resume): H8SX can use any register for TAS.
+ (decode): Add support for VECIND.
+ (sim_resume): Implement rte/l and rts/l.
+ (GETSR): New macro (actually old macro reincarnated).
+ (decode): Add handling for IMM2.
+ (sim_resume): Drop extra block around jmp, jsr, rts.
+ Add handling for trapa and rte.
+ For divxu.b, change 0xffff mask to 0xff.
+ (set_h8300h): Add bfd_mach_h8300sxn machine.
+
+2003-06-18 Corinna Vinschen
+
+ * sim-main.h (enum h8_regnum): Turn around order of MACH, MACL
+ and SBR, VBR.
+
+2003-06-05 Michael Snyder
+
+ * compile.c (sim_fetch_register): Handle SBR, VBR, MACH, MACL.
+ (sim_store_register): Ditto.
+
+2003-06-04 Michael Snyder
+
+ * compile.c (sim_info): Fix typo in output.
+
+ * compile.c (set_h8300h): Replace 'flag' arguments
+ with a bfd_machine argument, and decode it inline.
+ Check for bfd_mach_h8300hn and bfd_mach_h8300sn.
+
+2003-06-03 Michael Snyder
+
+ * compile.c: Add h8300sx insns and addressing modes.
+ * sim-main.h: Replaces h8300/inst.h.
+ * Makefile.in: Tweak to bring in some sim/common stuff.
+
+2003-04-13 Michael Snyder
+
+ * compile.c (sim_resume): Implement 'daa' and 'das' instructions.
+
+2003-03-20 D.Venkatasubramanian
+
+ * compile.c (cmdline_location): Added function to
+ return the location of 8-bit (256 locations) where the
+ Command Line arguments would be stored.
+ (decode): Added a TRAP to 0xcc for Commandline
+ processing using pseudo opcode O_SYS_CMDLINE.
+ (sim_resume): Added handling of O_SYS_CMDLINE Trap.
+ (sim_create_inferior): Setting a pointer to
+ Commandline Args array.
+ * inst.h: Added a new variable ptr_command_line for
+ storing pointer to Commandline array.
+
+2003-03-14 D.Venkatasubramanian
+
+ * compile.c (decode): Added code for some more magic traps.
+ * compile.c (sim_resume): Added support for File I/O system
+ calls through callback to host_system.
+ System calls provided support for :
+ open, read, write, lseek, close, stat, fstat
+ Only basic support for stat and fstat.
+
+2003-02-27 Andrew Cagney
+
+ * compile.c (sim_open, sim_create_inferior): Rename _bfd to bfd.
+
+2003-02-05 Kazu Hirata
+
+ * compile.c (init_pointers): Abort if wreg never gets initialized.
+ (sim_resume): Fix the handling of exts.w and extu.w.
+
+2003-01-31 Kazu Hirata
+
+ * compile.c (sim_resume): Fix the handling of bxor.
+
+2003-01-16 Michael Snyder
+
+ * compile.c: Change K&R function definitions to ISO.
+ (fetch): Make static, and eliminate unused parameter 'n'.
+
+2002-12-26 Kazu Hirata
+
+ * compile.c: Fix formatting.
+ * inst.h: Likewise.
+
+2002-07-29 Andrey Volkov
+
+ * compile.c: Include "gdb/sim-h8300.h"
+ * Makefile.in: Add dependences on "inst.h",
+ "gdb/callback.h", "gdb/remote-sim.h" and "gdb/sim-h8300.h".
+
+2002-06-16 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2002-06-08 Andrew Cagney
+
+ * compile.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
+
+2002-05-19 Kazu Hirata
+
+ * compile.c: Fix formatting.
+
+2002-05-18 Kazu Hirata
+
+ * compile.c: Fix formatting.
+
+2002-05-17 Andrey Volkov (avolkov@transas.com)
+
+ * compile.c: Add absented opcodes: LDC, STC, EEPMOV, TAS.
+
+2002-05-17 Andrey Volkov (avolkov@transas.com)
+
+ * compile.c: Add support of EXR register
+ * inst.h: Ditto.
+
+2002-05-17 Andrey Volkov (avolkov@transas.com)
+
+ * compile.c: Made h8300s as new target, not h8300h alias.
+ * inst.h: Ditto.
+
+2002-05-17 Andrey Volkov (avolkov@transas.com)
+
+ * compile.c: Add additional CCR flags (I,UI,H,U)
+
+2002-05-17 Andrey Volkov (avolkov@transas.com)
+
+ * compile.c: Change literal regnumbers to REGNUMS.
+ Fix instruction and cycles counting
+
+2001-12-20 Kazu Hirata
+
+ * compile.c: Fix formatting.
+
+2001-12-20 Kazu Hirata
+
+ * compile.c: Fix comment typos.
+
+2000-08-10 Kazu Hirata
+
+ * compile.c (decode): Clean up the code.
+
+2000-06-15 Kazu Hirata
+
+ * compile.c (decode): Distinguish inc/dec.[wl] and adds/subs
+ correctly.
+
+2000-06-20 Frank Ch. Eigler
+
+ * compile.c: Don't include "wait.h".
+ (sim_resume): Use local SIM_WIFEXITED and SIM_WIFSIGNALED macros
+ instead of WIF* from host.
+
+2000-06-13 Frank Ch. Eigler
+
+ * compile.c, writecode.c: Correct typo.
+
+2000-06-13 Kazu Hirata
+
+ * compile.c: Fix formatting.
+
+Tue May 23 21:39:23 2000 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Thu Sep 2 18:15:53 1999 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-05-08 Felix Lee
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+1999-04-02 Keith Seitz
+
+ * compile.c (POLL_QUIT_INTERVAL): Define. Used to tweak the
+ frequency at which the poll_quit callback is used.
+ (sim_resume): Use POLL_QUIT_INTERVAL instead of hard-coded value.
+
+Tue Apr 28 18:33:31 1998 Geoffrey Noer
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sun Apr 26 15:31:55 1998 Tom Tromey
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Sun Apr 26 15:20:14 1998 Tom Tromey
+
+ * acconfig.h: New file.
+ * configure.in: Reverted change of Apr 24; use sinclude again.
+
+Fri Apr 24 14:16:40 1998 Tom Tromey
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Fri Apr 24 11:19:46 1998 Tom Tromey
+
+ * configure.in: Don't call sinclude.
+
+Sat Apr 4 20:36:25 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Mar 27 16:15:52 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 25 12:35:29 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 18 12:38:12 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Feb 17 12:42:18 1998 Andrew Cagney
+
+ * compile.c (sim_store_register, sim_fetch_register): Pass in
+ length parameter. Return -1.
+
+Sun Feb 1 16:47:51 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Sat Jan 31 18:15:41 1998 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Jan 19 22:26:29 1998 Doug Evans
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Dec 15 23:17:11 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Thu Dec 4 09:21:05 1997 Doug Evans
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Nov 11 16:52:07 1997 Angela Marie Thomas (angela@cygnus.com)
+
+ * compile.c: #include stdio.h for definition of NULL on
+ some platforms.
+
+Wed Oct 22 14:43:00 1997 Andrew Cagney
+
+ * compile.c (sim_load): Pass lma_p and sim_write args to
+ sim_load_file.
+
+Fri Oct 3 09:28:00 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 24 17:38:57 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 23 11:04:38 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Sep 22 11:46:20 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Sep 19 17:45:25 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Sep 17 12:00:57 1997 Andrew Cagney
+
+ * Makefile.in (compile.o): Depend on config.h in local directory.
+
+Mon Sep 15 17:36:15 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Tue Sep 9 22:17:26 1997 Felix Lee
+
+ * inst.h (sim_state): rename to h8300_sim_state, to avoid conflict
+ with sim/common.
+ * configure.in: check for sys/param.h
+ * compile.c: #ifdef HAVE_SYS_PARAM_H.
+ #define SIGTRAP for wingdb.
+ (sim_resume): poll keyboard at least once per call.
+ (sim_resume): use host_callback instead of printf for syscall
+ output.
+
+Thu Sep 4 17:21:23 1997 Doug Evans
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Aug 27 18:13:22 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Tue Aug 26 10:38:43 1997 Andrew Cagney
+
+ * compile.c (sim_kill): Delete.
+ (sim_create_inferior): Add ABFD argument.
+ (sim_load): Move setting of PC from here.
+ (sim_create_inferior): To here.
+ (sim_open, sim_load, set_h8300h): Add fixme explaining why much of
+ the sim_load code should be moved to sim_open.
+
+Mon Aug 25 17:50:22 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Mon Aug 25 15:47:41 1997 Andrew Cagney
+
+ * compile.c (sim_open): Add ABFD argument.
+
+Tue May 20 10:16:48 1997 Andrew Cagney
+
+ * compile.c (sim_open): Add callback argument.
+ (sim_set_callbacks): Delete SIM_DESC argument.
+
+Wed Apr 30 10:22:29 1997 Doug Evans
+
+ * compile.c (sim_load): Call bfd_get_mach instead of examining
+ bfd fields directly.
+ * tconfig.in (SIM_PRE_LOAD): Delete, no longer used.
+
+Thu Apr 24 00:39:51 1997 Doug Evans
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Fri Apr 18 14:30:09 1997 Andrew Cagney
+
+ * compile.c (sim_resume): Use poll_quit callback.
+ (sim_stop): New function.
+
+Thu Apr 17 03:06:39 1997 Doug Evans
+
+ * Makefile.in (SIM_OBJS): Add sim-load.o.
+ * compile.c (sim_kind, myname): New static locals.
+ (sim_open): Set sim_kind, myname.
+ (sim_load): Return SIM_RC. New arg abfd. Update test for h8300h.
+ Call sim_load_file to load file into simulator. Set start address
+ from bfd.
+ (sim_create_inferior): Return SIM_RC. Delete arg start_address.
+
+Mon Apr 7 15:45:02 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+ * config.in: Ditto.
+
+Wed Apr 2 15:06:28 1997 Doug Evans
+
+ * compile.c (sim_open): New arg `kind'.
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Apr 2 14:34:19 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Wed Mar 19 01:14:00 1997 Andrew Cagney
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+Mon Mar 17 15:10:07 1997 Andrew Cagney
+
+ * configure: Re-generate.
+
+Fri Mar 14 10:34:11 1997 Michael Meissner
+
+ * configure: Regenerate to track ../common/aclocal.m4 changes.
+
+Thu Mar 13 12:48:05 1997 Doug Evans
+
+ * compile.c (sim_open): New SIM_DESC result. Argument is now in
+ argv form.
+ (other sim_*): New SIM_DESC argument.
+
+Tue Feb 4 13:36:29 1997 Doug Evans
+
+ * Makefile.in (@COMMON_MAKEFILE_FRAG): Use
+ COMMON_{PRE,POST}_CONFIG_FRAG instead.
+ * configure.in: sinclude ../common/aclocal.m4.
+ * configure: Regenerated.
+
+Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com)
+
+ * configure configure.in Makefile.in: Update to new configure
+ scheme which is more compatible with WinGDB builds.
+ * configure.in: Improve comment on how to run autoconf.
+ * configure: Re-run autoconf to get new ../common/aclocal.m4.
+ * Makefile.in: Use autoconf substitution to install common
+ makefile fragment.
+
+Wed Nov 20 01:39:12 1996 Doug Evans
+
+ * Makefile.in: Delete stuff moved to ../common/Make-common.in.
+ (SIM_OBJS): Define.
+ * configure.in: Simplify using macros in ../common/aclocal.m4.
+ * configure: Regenerated.
+ * inst.h (enum sim_state): Define.
+ (cpu_state_type): New member `state'. Set it whenever `exception'
+ is set.
+ * compile.c (sim_callback): New global.
+ (sim_set_simcache_size): Renamed from sim_csize.
+ (sim_resume, case O_SLEEP): Add right way to decode r0 but #if 0 out
+ 'cus it can't work. Change main loop exit test to use cpu.state.
+ (sim_trace): New function.
+ (sim_stop_reason): Add right way to set results, but #if 0 out.
+ (sim_size): New function.
+ (sim_info): Redirect calls to printf_filtered through callback.
+ (sim_set_callbacks): Record callback.
+ * run.c: Deleted, using one in ../common now.
+ * tconfig.in: New file.
+
+Thu Oct 3 16:13:18 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (mostlyclean): Don't remove config.log here.
+
+Fri Aug 9 22:59:11 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): rts, sleep, bpt and nop have
+ no associated "size".
+
+Tue Jul 9 22:15:39 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Fix all rotate-by-2-bits insns.
+
+Tue Jul 2 23:08:45 1996 Jeffrey A Law (law@cygnus.com)
+
+ * run.c (main): Don't "load" sections which don't have
+ SEC_LOAD set.
+ * compile.c (sim_resume, case "O_NOT"): Use ONOT instead
+ of OSHIFTS.
+ (ONOT): Define.
+ (sim_resume, shift/rotate cases): Add support for shift/rotate
+ by two bits.
+ (OSHIFTS): Corresponding changes.
+
+Tue Jul 2 01:37:27 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Handle "ldm.l" and "stm.l".
+
+Wed Jun 26 08:58:53 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (h8300smode): Declare.
+
+Wed Jun 26 12:20:56 1996 Jason Molenda (crash@godzilla.cygnus.co.jp)
+
+ * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir,
+ INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values.
+ (docdir): Removed.
+ * configure.in (AC_PREREQ): autoconf 2.5 or higher.
+ (AC_PROG_INSTALL): Added.
+ * configure: Rebuilt.
+
+Tue Jun 18 16:31:10 1996 Jeffrey A. Law
+
+ * compile.c (sim_load): Treat the H8/S like the H8/300H for now.
+ * run.c (main): Treat the H8/S like the H8/300H for now.
+
+Fri May 24 10:35:25 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (SEXTCHAR): Clear upper bits when sign
+ bit is clear.
+
+Wed May 22 22:23:37 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Correctly handle divu.
+
+Tue May 7 02:13:05 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Never allow the PC to have an
+ odd value.
+
+Fri Apr 12 16:50:37 1996 Jeffrey A Law (law@cygnus.com)
+
+ * inst.h: Expand on comments regarding H8300H_MSIZE. Note
+ separate memory is allocate for the 8-bit area.
+ (struct cpu_state_type): Add new "eightbit' field.
+ * compile.c (GET_MEMORY_L): Handle access into the 8-bit
+ area.
+ (GET_MEMORY_W, GET_MEMORY_B): Likewise.
+ (SET_MEMORY_L, SET_MEMORY_W, SET_MEMORY_B): Likewise.
+ (init_pointers): Initialize space for the 8-bit area.
+ (sim_write): Handle writing into the 8-bit area.
+ (sim_read): Handle reading from the 8-bit area.
+ (sim_load): Reallocate space for the 8-bit area.
+
+ * compile.c (sim_load): Re-allocate memory for the simulator
+ here.
+
+Fri Apr 12 09:39:56 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Fix and simplify overflow and carry
+ handling for 32bit ALU insns.
+
+Mon Apr 8 23:58:49 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (sim_resume): Fix overflow checks for ALU insns.
+
+Fri Apr 5 17:20:59 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (decode): Use "bit" to hold L_3 immediates instead
+ of holding them in "abs". Handle ABS8MEM memory references aka
+ 8-bit area. Replace ABSMOV references with ABS8MEM.
+
+Wed Mar 13 17:43:56 1996 Jeffrey A Law (law@cygnus.com)
+
+ * compile.c (fetch): Handle accesses to the exception/function
+ vectors.
+
+Mon Mar 11 09:53:25 1996 Doug Evans
+
+ * compile.c: #include "wait.h".
+ (sim_resume, sleep insn): Check program exit status in r0.
+ (sim_resume, shift insns): Fix setting of overflow flag for shal.
+ * run.c: #include .
+ (main): Abort if program got SIGILL.
+ Print error message if argument is invalid.
+ (usage): Improve text.
+
+Wed Feb 21 12:15:00 1996 Ian Lance Taylor
+
+ * configure: Regenerate with autoconf 2.7.
+
+Thu Jan 4 11:52:53 1996 Doug Evans
+
+ * inst.h (MPOWER,MSIZE): Deleted.
+ (H8300{,H}_MSIZE): Define.
+ * compile.c (memory_size): New static global.
+ (init_pointers): Set memory size from one of H8300{,H}_MSIZE.
+ (sim_write,sim_read): Use memory_size.
+
+Fri Oct 13 15:03:19 1995 steve chamberlain
+
+ * compile.c (sim_set_callbacks): New.
+
+Tue Oct 10 11:11:26 1995 Fred Fish
+
+ * Makefile.in (BISON): Remove macro.
+
+Wed Sep 20 13:35:02 1995 Ian Lance Taylor
+
+ * Makefile.in (maintainer-clean): New synonym for realclean.
+
+Fri Sep 8 12:18:53 1995 Ian Lance Taylor
+
+ * Makefile.in (install): Don't install in $(tooldir).
+
+ * configure.in: Call AC_CONFIG_HEADER. Don't try to use
+ bfd/hosts/*.h file or bfd/config/*.mh file. Call AC_PROG_CC and
+ AC_PROG_RANLIB. Substitute in values for CFLAGS, HDEFINES and AR.
+ Call AC_CHECK_HEADERS for stdlib.h and time.h. Touch stamp.h if
+ creating config.h.
+ * configure: Rebuild.
+ * config.in: New file, created by autoheader.
+ * Makefile.in (AR): Define as @AR@.
+ (CC): New variable, defined as @CC@.
+ (CFLAGS): Define as @CFLAGS@.
+ (RANLIB): Define as @RANLIB@.
+ (HDEFINES, TDEFINES): New variables.
+ (@host_makefile_frag@): Remove.
+ (compile.o, run.o): Depend upon config.h.
+ (mostlyclean): Make the same as clean, not distclean.
+ (clean): Remove config.log.
+ (distclean): Remove config.h and stamp-h.
+ (Makefile): Don't depend upon @frags@. Just rebuild Makefile when
+ invoking config.status.
+ (config.h, stamp-h): New targets.
+ * compile.c: Include "config.h". Don't include .
+ Include and if they exist. Don't include
+ "sysdep.h".
+ (get_now): Remove unused local b.
+ * run.c: Include "config.h". Include if it exists.
+ Don't include "sysdep.h".
+ * writecode.c: Don't include "bfd.h" or "sysdep.h". Include
+ .
+
+Thu Aug 3 10:45:37 1995 Fred Fish
+
+ * Update all FSF addresses except those in COPYING* files.
+
+Wed Jul 5 14:32:54 1995 J.T. Conklin
+
+ * Makefile.in (clean): Remove run.
+ (distclean): Remove Makefile.
+
+ * h8300.mt: Removed.
+
+ * Makefile.in, configure.in: converted to autoconf.
+ * configure: New file, generated with autconf 2.4.
+
+Fri Jun 30 16:50:24 1995 Stan Shebs
+
+ * compile.c (sim_do_command): New function.
+
+Tue Jun 20 16:18:13 1995 Steve Chamberlain
+
+ * compile.c (get_now): Don't do if win32.
+ (sim_resume): Poll in win32 too.
+
+Wed May 24 16:31:38 1995 Jim Wilson
+
+ * configure.in: Fix typo in last change.
+
+Mon Mar 27 10:32:34 1995 J.T. Conklin
+
+ * run.c: parse arguments with getopt().
+
+Tue Feb 28 17:30:08 1995 Ian Lance Taylor
+
+ * configure.in: Use ../../bfd/hosts/std-host.h if specific
+ host unavailable.
+
+Sun Jan 22 12:35:43 1995 Steve Chamberlain
+
+ * compile.c (sim_resume): Initialize cpu.mask.
+
+Thu Sep 8 16:53:00 1994 Steve Chamberlain (sac@jonny.cygnus.com)
+
+ * inst.h (MPOWER): Bump simulated memory size to 2^18 bytes.
+
+Wed May 18 13:47:58 1994 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c: #include "bfd.h".
+ (sim_*): Set result type to void where there isn't one.
+ (sim_resume, default case): Set cpu.exception to SIGILL.
+ (sim_trace): Delete.
+ (sim_set_pc): Delete.
+ (sim_info): Delete printf_fn arg, all callers changed.
+ Call printf_filtered.
+ (set_h8300h): New arg `flag', all callers changed.
+ (sim_close): New function.
+ (sim_load): New function.
+ (sim_create_inferior): Renamed from sim_set_args, all callers changed.
+ * run.c: #include , "remote-sim.h".
+ (printf_filtered): New function.
+
+Fri May 13 18:32:27 1994 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c (decode): Fix typo (16 bit branches).
+ (*): Some white space clean up.
+
+Fri May 6 13:44:01 1994 Steve Chamberlain (sac@jonny.cygnus.com)
+
+ * compile.c (decode): Compile 16bit branches properly.
+
+Sat Dec 11 16:32:36 1993 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * compile.c: Tidy up formatting. (sim_resume): Add orc, xorc,
+ andc. Poll for interrupts.
+
+Thu Oct 28 19:29:34 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c: #include "ansidecl.h" for remote-sim.h.
+
+Tue Oct 26 09:43:36 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * Makefile.in (CSEARCH): Add -I$(srcdir)/../../gdb
+ * compile.c: #include "remote-sim.h".
+ (sim_resume): New arg siggnal.
+ (sim_write): Use SIM_ADDR for type of arg addr.
+ Always return a value.
+ (sim_read): Ditto.
+ (sim_store_register): Result is type int.
+ (sim_fetch_register): Ditto.
+ (sim_stop_reason): Renamed from sim_stop_signal.
+ (sim_set_pc): Use SIM_ADDR for type of arg pc.
+ (sim_info): int result, new arg printf_fn.
+ (sim_kill): int result.
+ (sim_open): int result, new arg name.
+ * run.c (main): Use sim_set_pc to set pc.
+ Update call to sim_info.
+
+Sat Oct 23 15:01:18 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c (sim_stop_signal): Result is now enum sim_stop.
+
+Fri Oct 15 23:49:27 1993 Jim Kingdon (kingdon@lioth.cygnus.com)
+
+ * compile.c (sim_kill, sim_open, sim_set_args): New functions.
+
+Thu Oct 7 16:24:10 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * compile.c (sim_set_pc): Write to the pc direcly.
+ (sim_store_register): Now value is passed by reference. (sim_read,
+ sim_write): Return number of bytes copied.
+
+Tue Aug 17 07:16:15 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * compile.c (mop): New function to do multiplies.
+
+Fri Jul 16 13:53:53 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c (sim_resume): Add support for nop insn.
+
+Thu Jul 15 09:59:01 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c: Reset HMODE back to zero (accidently set it to 1).
+
+ * run.c (main): If h8/300h binary detected, call set_h8300h.
+ * compile.c (sim_resume): Fix O_NEG insn.
+
+Fri Jul 9 14:36:48 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * run.c (main): Add -h flag to enable h8/300h emulation.
+ * compile.c: Rename Hmode to HMODE (consistency with gdb).
+ (set_h8300h): New function.
+ (sim_resume): Add support for extu,exts insns.
+ (sim_resume): Fix logical right shifting.
+ (sim_resume, label alu32): Fix setting of carry flag.
+
+Sun Jul 4 00:35:41 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * compile.c (sim_csize): Initialize cpu.cache.
+
+Fri Jul 2 17:42:59 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * Makefile.in: Add -I../../bfd to pick up bfd.h.
+
+Thu Jun 24 13:40:12 1993 Doug Evans (dje@canuck.cygnus.com)
+
+ * run.c (main): Fix parsing of args.
+
+ * compile.c (sim_resume): Fix shll insn.
+
+Tue Jun 8 14:16:46 1993 Steve Chamberlain (sac@phydeaux.cygnus.com)
+
+ * compile.c: New file, supports H8/300H.
+ * p1,p3, gencode.c, state.h, writecode.c All dead and obsolete.
+
+Tue Jun 1 11:14:59 1993 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * run.c (main): Add -v to print info.
+ * p3.c (sim_info): New function.
+
+Mon Mar 15 15:48:31 1993 Ian Lance Taylor (ian@cygnus.com)
+
+ * h8300.mt (DO_INSTALL): Renamed from INSTALL.
+
+Wed Mar 3 15:06:53 1993 Steve Chamberlain (sac@poseidon.cygnus.com)
+
+ * Makefile.in: Don't use cb or indent
+ * p1.c, state.h, writecode.c: lint
+
+Mon Feb 1 16:44:58 1993 John Gilmore (gnu@cygnus.com)
+
+ * Makefile.in: Make SunOS halfdone VPATH work.
+ * p1.c: Lint picked up by HP native compiler.
+
+Mon Jan 4 12:32:35 1993 Steve Chamberlain (sac@wahini.cygnus.com)
+
+ * p1.c (sim_resume): when running on dos, any character typed to
+ the keyboard will cause a simulated exception.
+
+Sun Jan 3 14:15:07 1993 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * p1.c, p3.c, run.c, writecode.c: all used h8/300 opcodes in and
+ running
+
+Tue Dec 22 13:56:48 1992 Steve Chamberlain (sac@thepub.cygnus.com)
+
+ * new
+
ChangeLog
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: compile.c
===================================================================
--- compile.c (nonexistent)
+++ compile.c (revision 842)
@@ -0,0 +1,5121 @@
+/*
+ * Simulator for the Renesas (formerly Hitachi) H8/300 architecture.
+ *
+ * Written by Steve Chamberlain of Cygnus Support. sac@cygnus.com
+ *
+ * This file is part of H8/300 sim
+ *
+ *
+ * THIS SOFTWARE IS NOT COPYRIGHTED
+ *
+ * Cygnus offers the following for use in the public domain. Cygnus makes no
+ * warranty with regard to the software or its performance and the user
+ * accepts the software "AS IS" with all faults.
+ *
+ * CYGNUS DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD TO THIS
+ * SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#include
+#ifdef HAVE_TIME_H
+#include
+#endif
+#ifdef HAVE_STDLIB_H
+#include
+#endif
+#ifdef HAVE_SYS_PARAM_H
+#include
+#endif
+
+#include "bfd.h"
+#include "sim-main.h"
+#include "gdb/sim-h8300.h"
+#include "sys/stat.h"
+#include "sys/types.h"
+
+#ifndef SIGTRAP
+# define SIGTRAP 5
+#endif
+
+int debug;
+
+host_callback *sim_callback;
+
+static SIM_OPEN_KIND sim_kind;
+static char *myname;
+
+/* FIXME: Needs to live in header file.
+ This header should also include the things in remote-sim.h.
+ One could move this to remote-sim.h but this function isn't needed
+ by gdb. */
+static void set_simcache_size (SIM_DESC, int);
+
+#define X(op, size) (op * 4 + size)
+
+#define SP (h8300hmode && !h8300_normal_mode ? SL : SW)
+
+#define h8_opcodes ops
+#define DEFINE_TABLE
+#include "opcode/h8300.h"
+
+/* CPU data object: */
+
+static int
+sim_state_initialize (SIM_DESC sd, sim_cpu *cpu)
+{
+ /* FIXME: not really necessary, since sim_cpu_alloc calls zalloc. */
+
+ memset (&cpu->regs, 0, sizeof(cpu->regs));
+ cpu->regs[SBR_REGNUM] = 0xFFFFFF00;
+ cpu->pc = 0;
+ cpu->delayed_branch = 0;
+ cpu->memory = NULL;
+ cpu->eightbit = NULL;
+ cpu->mask = 0;
+
+ /* Initialize local simulator state. */
+ sd->sim_cache = NULL;
+ sd->sim_cache_size = 0;
+ sd->cache_idx = NULL;
+ sd->cache_top = 0;
+ sd->memory_size = 0;
+ sd->compiles = 0;
+#ifdef ADEBUG
+ memset (&cpu->stats, 0, sizeof (cpu->stats));
+#endif
+ return 0;
+}
+
+static unsigned int
+h8_get_pc (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> pc;
+}
+
+static void
+h8_set_pc (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> pc = val;
+}
+
+static unsigned int
+h8_get_ccr (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[CCR_REGNUM];
+}
+
+static void
+h8_set_ccr (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[CCR_REGNUM] = val;
+}
+
+static unsigned int
+h8_get_exr (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[EXR_REGNUM];
+}
+
+static void
+h8_set_exr (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[EXR_REGNUM] = val;
+}
+
+static int
+h8_get_sbr (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[SBR_REGNUM];
+}
+
+static void
+h8_set_sbr (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[SBR_REGNUM] = val;
+}
+
+static int
+h8_get_vbr (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[VBR_REGNUM];
+}
+
+static void
+h8_set_vbr (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[VBR_REGNUM] = val;
+}
+
+static int
+h8_get_cache_top (SIM_DESC sd)
+{
+ return sd -> cache_top;
+}
+
+static void
+h8_set_cache_top (SIM_DESC sd, int val)
+{
+ sd -> cache_top = val;
+}
+
+static int
+h8_get_mask (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> mask;
+}
+
+static void
+h8_set_mask (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> mask = val;
+}
+#if 0
+static int
+h8_get_exception (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> exception;
+}
+
+static void
+h8_set_exception (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> exception = val;
+}
+
+static enum h8300_sim_state
+h8_get_state (SIM_DESC sd)
+{
+ return sd -> state;
+}
+
+static void
+h8_set_state (SIM_DESC sd, enum h8300_sim_state val)
+{
+ sd -> state = val;
+}
+#endif
+static unsigned int
+h8_get_cycles (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[CYCLE_REGNUM];
+}
+
+static void
+h8_set_cycles (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[CYCLE_REGNUM] = val;
+}
+
+static unsigned int
+h8_get_insts (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[INST_REGNUM];
+}
+
+static void
+h8_set_insts (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[INST_REGNUM] = val;
+}
+
+static unsigned int
+h8_get_ticks (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[TICK_REGNUM];
+}
+
+static void
+h8_set_ticks (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[TICK_REGNUM] = val;
+}
+
+static unsigned int
+h8_get_mach (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[MACH_REGNUM];
+}
+
+static void
+h8_set_mach (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[MACH_REGNUM] = val;
+}
+
+static unsigned int
+h8_get_macl (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> regs[MACL_REGNUM];
+}
+
+static void
+h8_set_macl (SIM_DESC sd, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[MACL_REGNUM] = val;
+}
+
+static int
+h8_get_compiles (SIM_DESC sd)
+{
+ return sd -> compiles;
+}
+
+static void
+h8_increment_compiles (SIM_DESC sd)
+{
+ sd -> compiles ++;
+}
+
+static unsigned int *
+h8_get_reg_buf (SIM_DESC sd)
+{
+ return &(((STATE_CPU (sd, 0)) -> regs)[0]);
+}
+
+static unsigned int
+h8_get_reg (SIM_DESC sd, int regnum)
+{
+ return (STATE_CPU (sd, 0)) -> regs[regnum];
+}
+
+static void
+h8_set_reg (SIM_DESC sd, int regnum, int val)
+{
+ (STATE_CPU (sd, 0)) -> regs[regnum] = val;
+}
+
+#ifdef ADEBUG
+static int
+h8_get_stats (SIM_DESC sd, int idx)
+{
+ return sd -> stats[idx];
+}
+
+static void
+h8_increment_stats (SIM_DESC sd, int idx)
+{
+ sd -> stats[idx] ++;
+}
+#endif /* ADEBUG */
+
+static unsigned short *
+h8_get_cache_idx_buf (SIM_DESC sd)
+{
+ return sd -> cache_idx;
+}
+
+static void
+h8_set_cache_idx_buf (SIM_DESC sd, unsigned short *ptr)
+{
+ sd -> cache_idx = ptr;
+}
+
+static unsigned short
+h8_get_cache_idx (SIM_DESC sd, unsigned int idx)
+{
+ if (idx > sd->memory_size)
+ return (unsigned short) -1;
+ return sd -> cache_idx[idx];
+}
+
+static void
+h8_set_cache_idx (SIM_DESC sd, int idx, unsigned int val)
+{
+ sd -> cache_idx[idx] = (unsigned short) val;
+}
+
+static unsigned char *
+h8_get_memory_buf (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> memory;
+}
+
+static void
+h8_set_memory_buf (SIM_DESC sd, unsigned char *ptr)
+{
+ (STATE_CPU (sd, 0)) -> memory = ptr;
+}
+
+static unsigned char
+h8_get_memory (SIM_DESC sd, int idx)
+{
+ return (STATE_CPU (sd, 0)) -> memory[idx];
+}
+
+static void
+h8_set_memory (SIM_DESC sd, int idx, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> memory[idx] = (unsigned char) val;
+}
+
+static unsigned char *
+h8_get_eightbit_buf (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> eightbit;
+}
+
+static void
+h8_set_eightbit_buf (SIM_DESC sd, unsigned char *ptr)
+{
+ (STATE_CPU (sd, 0)) -> eightbit = ptr;
+}
+
+static unsigned char
+h8_get_eightbit (SIM_DESC sd, int idx)
+{
+ return (STATE_CPU (sd, 0)) -> eightbit[idx];
+}
+
+static void
+h8_set_eightbit (SIM_DESC sd, int idx, unsigned int val)
+{
+ (STATE_CPU (sd, 0)) -> eightbit[idx] = (unsigned char) val;
+}
+
+static unsigned int
+h8_get_delayed_branch (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> delayed_branch;
+}
+
+static void
+h8_set_delayed_branch (SIM_DESC sd, unsigned int dest)
+{
+ (STATE_CPU (sd, 0)) -> delayed_branch = dest;
+}
+
+static char **
+h8_get_command_line (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> command_line;
+}
+
+static void
+h8_set_command_line (SIM_DESC sd, char ** val)
+{
+ (STATE_CPU (sd, 0)) -> command_line = val;
+}
+
+static char *
+h8_get_cmdline_arg (SIM_DESC sd, int index)
+{
+ return (STATE_CPU (sd, 0)) -> command_line[index];
+}
+
+static void
+h8_set_cmdline_arg (SIM_DESC sd, int index, char * val)
+{
+ (STATE_CPU (sd, 0)) -> command_line[index] = val;
+}
+
+/* MAC Saturation Mode */
+static int
+h8_get_macS (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> macS;
+}
+
+static void
+h8_set_macS (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> macS = (val != 0);
+}
+
+/* MAC Zero Flag */
+static int
+h8_get_macZ (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> macZ;
+}
+
+static void
+h8_set_macZ (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> macZ = (val != 0);
+}
+
+/* MAC Negative Flag */
+static int
+h8_get_macN (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> macN;
+}
+
+static void
+h8_set_macN (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> macN = (val != 0);
+}
+
+/* MAC Overflow Flag */
+static int
+h8_get_macV (SIM_DESC sd)
+{
+ return (STATE_CPU (sd, 0)) -> macV;
+}
+
+static void
+h8_set_macV (SIM_DESC sd, int val)
+{
+ (STATE_CPU (sd, 0)) -> macV = (val != 0);
+}
+
+/* End CPU data object. */
+
+/* The rate at which to call the host's poll_quit callback. */
+
+enum { POLL_QUIT_INTERVAL = 0x80000 };
+
+#define LOW_BYTE(x) ((x) & 0xff)
+#define HIGH_BYTE(x) (((x) >> 8) & 0xff)
+#define P(X, Y) ((X << 8) | Y)
+
+#define C (c != 0)
+#define Z (nz == 0)
+#define V (v != 0)
+#define N (n != 0)
+#define U (u != 0)
+#define H (h != 0)
+#define UI (ui != 0)
+#define I (intMaskBit != 0)
+
+#define BUILDSR(SD) \
+ h8_set_ccr (SD, (I << 7) | (UI << 6) | (H << 5) | (U << 4) \
+ | (N << 3) | (Z << 2) | (V << 1) | C)
+
+#define GETSR(SD) \
+ /* Get Status Register (flags). */ \
+ c = (h8_get_ccr (sd) >> 0) & 1; \
+ v = (h8_get_ccr (sd) >> 1) & 1; \
+ nz = !((h8_get_ccr (sd) >> 2) & 1); \
+ n = (h8_get_ccr (sd) >> 3) & 1; \
+ u = (h8_get_ccr (sd) >> 4) & 1; \
+ h = (h8_get_ccr (sd) >> 5) & 1; \
+ ui = ((h8_get_ccr (sd) >> 6) & 1); \
+ intMaskBit = (h8_get_ccr (sd) >> 7) & 1
+
+
+#ifdef __CHAR_IS_SIGNED__
+#define SEXTCHAR(x) ((char) (x))
+#endif
+
+#ifndef SEXTCHAR
+#define SEXTCHAR(x) ((x & 0x80) ? (x | ~0xff) : x & 0xff)
+#endif
+
+#define UEXTCHAR(x) ((x) & 0xff)
+#define UEXTSHORT(x) ((x) & 0xffff)
+#define SEXTSHORT(x) ((short) (x))
+
+int h8300hmode = 0;
+int h8300smode = 0;
+int h8300_normal_mode = 0;
+int h8300sxmode = 0;
+
+static int memory_size;
+
+static int
+get_now (void)
+{
+ return time (0); /* WinXX HAS UNIX like 'time', so why not use it? */
+}
+
+static int
+now_persec (void)
+{
+ return 1;
+}
+
+static int
+bitfrom (int x)
+{
+ switch (x & SIZE)
+ {
+ case L_8:
+ return SB;
+ case L_16:
+ case L_16U:
+ return SW;
+ case L_32:
+ return SL;
+ case L_P:
+ return (h8300hmode && !h8300_normal_mode)? SL : SW;
+ }
+ return 0;
+}
+
+/* Simulate an indirection / dereference.
+ return 0 for success, -1 for failure.
+*/
+
+static unsigned int
+lvalue (SIM_DESC sd, int x, int rn, unsigned int *val)
+{
+ if (val == NULL) /* Paranoia. */
+ return -1;
+
+ switch (x / 4)
+ {
+ case OP_DISP:
+ if (rn == ZERO_REGNUM)
+ *val = X (OP_IMM, SP);
+ else
+ *val = X (OP_REG, SP);
+ break;
+ case OP_MEM:
+ *val = X (OP_MEM, SP);
+ break;
+ default:
+ sim_engine_set_run_state (sd, sim_stopped, SIGSEGV);
+ return -1;
+ }
+ return 0;
+}
+
+static int
+cmdline_location()
+{
+ if (h8300smode && !h8300_normal_mode)
+ return 0xffff00L;
+ else if (h8300hmode && !h8300_normal_mode)
+ return 0x2ff00L;
+ else
+ return 0xff00L;
+}
+
+static void
+decode (SIM_DESC sd, int addr, unsigned char *data, decoded_inst *dst)
+{
+ int cst[3] = {0, 0, 0};
+ int reg[3] = {0, 0, 0};
+ int rdisp[3] = {0, 0, 0};
+ int opnum;
+ const struct h8_opcode *q;
+
+ dst->dst.type = -1;
+ dst->src.type = -1;
+
+ /* Find the exact opcode/arg combo. */
+ for (q = h8_opcodes; q->name; q++)
+ {
+ const op_type *nib = q->data.nib;
+ unsigned int len = 0;
+
+ if ((q->available == AV_H8SX && !h8300sxmode) ||
+ (q->available == AV_H8S && !h8300smode) ||
+ (q->available == AV_H8H && !h8300hmode))
+ continue;
+
+ cst[0] = cst[1] = cst[2] = 0;
+ reg[0] = reg[1] = reg[2] = 0;
+ rdisp[0] = rdisp[1] = rdisp[2] = 0;
+
+ while (1)
+ {
+ op_type looking_for = *nib;
+ int thisnib = data[len / 2];
+
+ thisnib = (len & 1) ? (thisnib & 0xf) : ((thisnib >> 4) & 0xf);
+ opnum = ((looking_for & OP3) ? 2 :
+ (looking_for & DST) ? 1 : 0);
+
+ if (looking_for < 16 && looking_for >= 0)
+ {
+ if (looking_for != thisnib)
+ goto fail;
+ }
+ else
+ {
+ if (looking_for & B31)
+ {
+ if (!((thisnib & 0x8) != 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B31);
+ thisnib &= 0x7;
+ }
+ else if (looking_for & B30)
+ {
+ if (!((thisnib & 0x8) == 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B30);
+ }
+
+ if (looking_for & B21)
+ {
+ if (!((thisnib & 0x4) != 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B21);
+ thisnib &= 0xb;
+ }
+ else if (looking_for & B20)
+ {
+ if (!((thisnib & 0x4) == 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B20);
+ }
+
+ if (looking_for & B11)
+ {
+ if (!((thisnib & 0x2) != 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B11);
+ thisnib &= 0xd;
+ }
+ else if (looking_for & B10)
+ {
+ if (!((thisnib & 0x2) == 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B10);
+ }
+
+ if (looking_for & B01)
+ {
+ if (!((thisnib & 0x1) != 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B01);
+ thisnib &= 0xe;
+ }
+ else if (looking_for & B00)
+ {
+ if (!((thisnib & 0x1) == 0))
+ goto fail;
+
+ looking_for = (op_type) (looking_for & ~B00);
+ }
+
+ if (looking_for & IGNORE)
+ {
+ /* Hitachi has declared that IGNORE must be zero. */
+ if (thisnib != 0)
+ goto fail;
+ }
+ else if ((looking_for & MODE) == DATA)
+ {
+ ; /* Skip embedded data. */
+ }
+ else if ((looking_for & MODE) == DBIT)
+ {
+ /* Exclude adds/subs by looking at bit 0 and 2, and
+ make sure the operand size, either w or l,
+ matches by looking at bit 1. */
+ if ((looking_for & 7) != (thisnib & 7))
+ goto fail;
+
+ cst[opnum] = (thisnib & 0x8) ? 2 : 1;
+ }
+ else if ((looking_for & MODE) == REG ||
+ (looking_for & MODE) == LOWREG ||
+ (looking_for & MODE) == IND ||
+ (looking_for & MODE) == PREINC ||
+ (looking_for & MODE) == POSTINC ||
+ (looking_for & MODE) == PREDEC ||
+ (looking_for & MODE) == POSTDEC)
+ {
+ reg[opnum] = thisnib;
+ }
+ else if (looking_for & CTRL)
+ {
+ thisnib &= 7;
+ if (((looking_for & MODE) == CCR && (thisnib != C_CCR)) ||
+ ((looking_for & MODE) == EXR && (thisnib != C_EXR)) ||
+ ((looking_for & MODE) == MACH && (thisnib != C_MACH)) ||
+ ((looking_for & MODE) == MACL && (thisnib != C_MACL)) ||
+ ((looking_for & MODE) == VBR && (thisnib != C_VBR)) ||
+ ((looking_for & MODE) == SBR && (thisnib != C_SBR)))
+ goto fail;
+ if (((looking_for & MODE) == CCR_EXR &&
+ (thisnib != C_CCR && thisnib != C_EXR)) ||
+ ((looking_for & MODE) == VBR_SBR &&
+ (thisnib != C_VBR && thisnib != C_SBR)) ||
+ ((looking_for & MODE) == MACREG &&
+ (thisnib != C_MACH && thisnib != C_MACL)))
+ goto fail;
+ if (((looking_for & MODE) == CC_EX_VB_SB &&
+ (thisnib != C_CCR && thisnib != C_EXR &&
+ thisnib != C_VBR && thisnib != C_SBR)))
+ goto fail;
+
+ reg[opnum] = thisnib;
+ }
+ else if ((looking_for & MODE) == ABS)
+ {
+ /* Absolute addresses are unsigned. */
+ switch (looking_for & SIZE)
+ {
+ case L_8:
+ cst[opnum] = UEXTCHAR (data[len / 2]);
+ break;
+ case L_16:
+ case L_16U:
+ cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
+ break;
+ case L_32:
+ cst[opnum] =
+ (data[len / 2 + 0] << 24) +
+ (data[len / 2 + 1] << 16) +
+ (data[len / 2 + 2] << 8) +
+ (data[len / 2 + 3]);
+ break;
+ default:
+ printf ("decode: bad size ABS: %d\n",
+ (looking_for & SIZE));
+ goto end;
+ }
+ }
+ else if ((looking_for & MODE) == DISP ||
+ (looking_for & MODE) == PCREL ||
+ (looking_for & MODE) == INDEXB ||
+ (looking_for & MODE) == INDEXW ||
+ (looking_for & MODE) == INDEXL)
+ {
+ switch (looking_for & SIZE)
+ {
+ case L_2:
+ cst[opnum] = thisnib & 3;
+ break;
+ case L_8:
+ cst[opnum] = SEXTCHAR (data[len / 2]);
+ break;
+ case L_16:
+ cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
+ cst[opnum] = (short) cst[opnum]; /* Sign extend. */
+ break;
+ case L_16U:
+ cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
+ break;
+ case L_32:
+ cst[opnum] =
+ (data[len / 2 + 0] << 24) +
+ (data[len / 2 + 1] << 16) +
+ (data[len / 2 + 2] << 8) +
+ (data[len / 2 + 3]);
+ break;
+ default:
+ printf ("decode: bad size DISP/PCREL/INDEX: %d\n",
+ (looking_for & SIZE));
+ goto end;
+ }
+ }
+ else if ((looking_for & SIZE) == L_16 ||
+ (looking_for & SIZE) == L_16U)
+ {
+ cst[opnum] = (data[len / 2] << 8) + data[len / 2 + 1];
+ /* Immediates are always unsigned. */
+ if ((looking_for & SIZE) != L_16U &&
+ (looking_for & MODE) != IMM)
+ cst[opnum] = (short) cst[opnum]; /* Sign extend. */
+ }
+ else if (looking_for & ABSJMP)
+ {
+ switch (looking_for & SIZE) {
+ case L_24:
+ cst[opnum] = (data[1] << 16) | (data[2] << 8) | (data[3]);
+ break;
+ case L_32:
+ cst[opnum] =
+ (data[len / 2 + 0] << 24) +
+ (data[len / 2 + 1] << 16) +
+ (data[len / 2 + 2] << 8) +
+ (data[len / 2 + 3]);
+ break;
+ default:
+ printf ("decode: bad size ABSJMP: %d\n",
+ (looking_for & SIZE));
+ goto end;
+ }
+ }
+ else if ((looking_for & MODE) == MEMIND)
+ {
+ cst[opnum] = data[1];
+ }
+ else if ((looking_for & MODE) == VECIND)
+ {
+ if(h8300_normal_mode)
+ cst[opnum] = ((data[1] & 0x7f) + 0x80) * 2;
+ else
+ cst[opnum] = ((data[1] & 0x7f) + 0x80) * 4;
+ cst[opnum] += h8_get_vbr (sd); /* Add vector base reg. */
+ }
+ else if ((looking_for & SIZE) == L_32)
+ {
+ int i = len / 2;
+
+ cst[opnum] =
+ (data[i + 0] << 24) |
+ (data[i + 1] << 16) |
+ (data[i + 2] << 8) |
+ (data[i + 3]);
+ }
+ else if ((looking_for & SIZE) == L_24)
+ {
+ int i = len / 2;
+
+ cst[opnum] =
+ (data[i + 0] << 16) |
+ (data[i + 1] << 8) |
+ (data[i + 2]);
+ }
+ else if (looking_for & DISPREG)
+ {
+ rdisp[opnum] = thisnib & 0x7;
+ }
+ else if ((looking_for & MODE) == KBIT)
+ {
+ switch (thisnib)
+ {
+ case 9:
+ cst[opnum] = 4;
+ break;
+ case 8:
+ cst[opnum] = 2;
+ break;
+ case 0:
+ cst[opnum] = 1;
+ break;
+ default:
+ goto fail;
+ }
+ }
+ else if ((looking_for & SIZE) == L_8)
+ {
+ if ((looking_for & MODE) == ABS)
+ {
+ /* Will be combined with contents of SBR_REGNUM
+ by fetch (). For all modes except h8sx, this
+ will always contain the value 0xFFFFFF00. */
+ cst[opnum] = data[len / 2] & 0xff;
+ }
+ else
+ {
+ cst[opnum] = data[len / 2] & 0xff;
+ }
+ }
+ else if ((looking_for & SIZE) == L_2)
+ {
+ cst[opnum] = thisnib & 3;
+ }
+ else if ((looking_for & SIZE) == L_3 ||
+ (looking_for & SIZE) == L_3NZ)
+ {
+ cst[opnum] = thisnib & 7;
+ if (cst[opnum] == 0 && (looking_for & SIZE) == L_3NZ)
+ goto fail;
+ }
+ else if ((looking_for & SIZE) == L_4)
+ {
+ cst[opnum] = thisnib & 15;
+ }
+ else if ((looking_for & SIZE) == L_5)
+ {
+ cst[opnum] = data[len / 2] & 0x1f;
+ }
+ else if (looking_for == E)
+ {
+#ifdef ADEBUG
+ dst->op = q;
+#endif
+ /* Fill in the args. */
+ {
+ const op_type *args = q->args.nib;
+ int hadone = 0;
+ int nargs;
+
+ for (nargs = 0;
+ nargs < 3 && *args != E;
+ nargs++)
+ {
+ int x = *args;
+ ea_type *p;
+
+ opnum = ((x & OP3) ? 2 :
+ (x & DST) ? 1 : 0);
+ if (x & DST)
+ p = &dst->dst;
+ else if (x & OP3)
+ p = &dst->op3;
+ else
+ p = &dst->src;
+
+ if ((x & MODE) == IMM ||
+ (x & MODE) == KBIT ||
+ (x & MODE) == DBIT)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_IMM, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+ }
+ else if ((x & MODE) == CONST_2 ||
+ (x & MODE) == CONST_4 ||
+ (x & MODE) == CONST_8 ||
+ (x & MODE) == CONST_16)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_IMM, OP_SIZE (q->how));
+ switch (x & MODE) {
+ case CONST_2: p->literal = 2; break;
+ case CONST_4: p->literal = 4; break;
+ case CONST_8: p->literal = 8; break;
+ case CONST_16: p->literal = 16; break;
+ }
+ }
+ else if ((x & MODE) == REG)
+ {
+ p->type = X (OP_REG, bitfrom (x));
+ p->reg = reg[opnum];
+ }
+ else if ((x & MODE) == LOWREG)
+ {
+ p->type = X (OP_LOWREG, bitfrom (x));
+ p->reg = reg[opnum];
+ }
+ else if ((x & MODE) == PREINC)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_PREINC, OP_SIZE (q->how));
+ p->reg = reg[opnum] & 0x7;
+ }
+ else if ((x & MODE) == POSTINC)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_POSTINC, OP_SIZE (q->how));
+ p->reg = reg[opnum] & 0x7;
+ }
+ else if ((x & MODE) == PREDEC)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_PREDEC, OP_SIZE (q->how));
+ p->reg = reg[opnum] & 0x7;
+ }
+ else if ((x & MODE) == POSTDEC)
+ {
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_POSTDEC, OP_SIZE (q->how));
+ p->reg = reg[opnum] & 0x7;
+ }
+ else if ((x & MODE) == IND)
+ {
+ /* Note: an indirect is transformed into
+ a displacement of zero.
+ */
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_DISP, OP_SIZE (q->how));
+ p->reg = reg[opnum] & 0x7;
+ p->literal = 0;
+ if (OP_KIND (q->how) == O_JSR ||
+ OP_KIND (q->how) == O_JMP)
+ if (lvalue (sd, p->type, p->reg, (unsigned int *)&p->type))
+ goto end;
+ }
+ else if ((x & MODE) == ABS)
+ {
+ /* Note: a 16 or 32 bit ABS is transformed into a
+ displacement from pseudo-register ZERO_REGNUM,
+ which is always zero. An 8 bit ABS becomes
+ a displacement from SBR_REGNUM.
+ */
+ /* Use the instruction to determine
+ the operand size. */
+ p->type = X (OP_DISP, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+
+ /* 8-bit ABS is displacement from SBR.
+ 16 and 32-bit ABS are displacement from ZERO.
+ (SBR will always be zero except for h8/sx)
+ */
+ if ((x & SIZE) == L_8)
+ p->reg = SBR_REGNUM;
+ else
+ p->reg = ZERO_REGNUM;;
+ }
+ else if ((x & MODE) == MEMIND ||
+ (x & MODE) == VECIND)
+ {
+ /* Size doesn't matter. */
+ p->type = X (OP_MEM, SB);
+ p->literal = cst[opnum];
+ if (OP_KIND (q->how) == O_JSR ||
+ OP_KIND (q->how) == O_JMP)
+ if (lvalue (sd, p->type, p->reg, (unsigned int *)&p->type))
+ goto end;
+ }
+ else if ((x & MODE) == PCREL)
+ {
+ /* Size doesn't matter. */
+ p->type = X (OP_PCREL, SB);
+ p->literal = cst[opnum];
+ }
+ else if (x & ABSJMP)
+ {
+ p->type = X (OP_IMM, SP);
+ p->literal = cst[opnum];
+ }
+ else if ((x & MODE) == INDEXB)
+ {
+ p->type = X (OP_INDEXB, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+ p->reg = rdisp[opnum];
+ }
+ else if ((x & MODE) == INDEXW)
+ {
+ p->type = X (OP_INDEXW, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+ p->reg = rdisp[opnum];
+ }
+ else if ((x & MODE) == INDEXL)
+ {
+ p->type = X (OP_INDEXL, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+ p->reg = rdisp[opnum];
+ }
+ else if ((x & MODE) == DISP)
+ {
+ /* Yuck -- special for mova args. */
+ if (strncmp (q->name, "mova", 4) == 0 &&
+ (x & SIZE) == L_2)
+ {
+ /* Mova can have a DISP2 dest, with an
+ INDEXB or INDEXW src. The multiplier
+ for the displacement value is determined
+ by the src operand, not by the insn. */
+
+ switch (OP_KIND (dst->src.type))
+ {
+ case OP_INDEXB:
+ p->type = X (OP_DISP, SB);
+ p->literal = cst[opnum];
+ break;
+ case OP_INDEXW:
+ p->type = X (OP_DISP, SW);
+ p->literal = cst[opnum] * 2;
+ break;
+ default:
+ goto fail;
+ }
+ }
+ else
+ {
+ p->type = X (OP_DISP, OP_SIZE (q->how));
+ p->literal = cst[opnum];
+ /* DISP2 is special. */
+ if ((x & SIZE) == L_2)
+ switch (OP_SIZE (q->how))
+ {
+ case SB: break;
+ case SW: p->literal *= 2; break;
+ case SL: p->literal *= 4; break;
+ }
+ }
+ p->reg = rdisp[opnum];
+ }
+ else if (x & CTRL)
+ {
+ switch (reg[opnum])
+ {
+ case C_CCR:
+ p->type = X (OP_CCR, SB);
+ break;
+ case C_EXR:
+ p->type = X (OP_EXR, SB);
+ break;
+ case C_MACH:
+ p->type = X (OP_MACH, SL);
+ break;
+ case C_MACL:
+ p->type = X (OP_MACL, SL);
+ break;
+ case C_VBR:
+ p->type = X (OP_VBR, SL);
+ break;
+ case C_SBR:
+ p->type = X (OP_SBR, SL);
+ break;
+ }
+ }
+ else if ((x & MODE) == CCR)
+ {
+ p->type = OP_CCR;
+ }
+ else if ((x & MODE) == EXR)
+ {
+ p->type = OP_EXR;
+ }
+ else
+ printf ("Hmmmm 0x%x...\n", x);
+
+ args++;
+ }
+ }
+
+ /* Unary operators: treat src and dst as equivalent. */
+ if (dst->dst.type == -1)
+ dst->dst = dst->src;
+ if (dst->src.type == -1)
+ dst->src = dst->dst;
+
+ dst->opcode = q->how;
+ dst->cycles = q->time;
+
+ /* And jsr's to these locations are turned into
+ magic traps. */
+
+ if (OP_KIND (dst->opcode) == O_JSR)
+ {
+ switch (dst->src.literal)
+ {
+ case 0xc5:
+ dst->opcode = O (O_SYS_OPEN, SB);
+ break;
+ case 0xc6:
+ dst->opcode = O (O_SYS_READ, SB);
+ break;
+ case 0xc7:
+ dst->opcode = O (O_SYS_WRITE, SB);
+ break;
+ case 0xc8:
+ dst->opcode = O (O_SYS_LSEEK, SB);
+ break;
+ case 0xc9:
+ dst->opcode = O (O_SYS_CLOSE, SB);
+ break;
+ case 0xca:
+ dst->opcode = O (O_SYS_STAT, SB);
+ break;
+ case 0xcb:
+ dst->opcode = O (O_SYS_FSTAT, SB);
+ break;
+ case 0xcc:
+ dst->opcode = O (O_SYS_CMDLINE, SB);
+ break;
+ }
+ /* End of Processing for system calls. */
+ }
+
+ dst->next_pc = addr + len / 2;
+ return;
+ }
+ else
+ printf ("Don't understand 0x%x \n", looking_for);
+ }
+
+ len++;
+ nib++;
+ }
+
+ fail:
+ ;
+ }
+ end:
+ /* Fell off the end. */
+ dst->opcode = O (O_ILL, SB);
+}
+
+static void
+compile (SIM_DESC sd, int pc)
+{
+ int idx;
+
+ /* Find the next cache entry to use. */
+ idx = h8_get_cache_top (sd) + 1;
+ h8_increment_compiles (sd);
+ if (idx >= sd->sim_cache_size)
+ {
+ idx = 1;
+ }
+ h8_set_cache_top (sd, idx);
+
+ /* Throw away its old meaning. */
+ h8_set_cache_idx (sd, sd->sim_cache[idx].oldpc, 0);
+
+ /* Set to new address. */
+ sd->sim_cache[idx].oldpc = pc;
+
+ /* Fill in instruction info. */
+ decode (sd, pc, h8_get_memory_buf (sd) + pc, sd->sim_cache + idx);
+
+ /* Point to new cache entry. */
+ h8_set_cache_idx (sd, pc, idx);
+}
+
+
+static unsigned char *breg[32];
+static unsigned short *wreg[16];
+static unsigned int *lreg[18];
+
+#define GET_B_REG(X) *(breg[X])
+#define SET_B_REG(X, Y) (*(breg[X])) = (Y)
+#define GET_W_REG(X) *(wreg[X])
+#define SET_W_REG(X, Y) (*(wreg[X])) = (Y)
+#define GET_L_REG(X) h8_get_reg (sd, X)
+#define SET_L_REG(X, Y) h8_set_reg (sd, X, Y)
+
+#define GET_MEMORY_L(X) \
+ ((X) < memory_size \
+ ? ((h8_get_memory (sd, (X)+0) << 24) | (h8_get_memory (sd, (X)+1) << 16) \
+ | (h8_get_memory (sd, (X)+2) << 8) | (h8_get_memory (sd, (X)+3) << 0)) \
+ : ((h8_get_eightbit (sd, ((X)+0) & 0xff) << 24) \
+ | (h8_get_eightbit (sd, ((X)+1) & 0xff) << 16) \
+ | (h8_get_eightbit (sd, ((X)+2) & 0xff) << 8) \
+ | (h8_get_eightbit (sd, ((X)+3) & 0xff) << 0)))
+
+#define GET_MEMORY_W(X) \
+ ((X) < memory_size \
+ ? ((h8_get_memory (sd, (X)+0) << 8) \
+ | (h8_get_memory (sd, (X)+1) << 0)) \
+ : ((h8_get_eightbit (sd, ((X)+0) & 0xff) << 8) \
+ | (h8_get_eightbit (sd, ((X)+1) & 0xff) << 0)))
+
+
+#define GET_MEMORY_B(X) \
+ ((X) < memory_size ? (h8_get_memory (sd, (X))) \
+ : (h8_get_eightbit (sd, (X) & 0xff)))
+
+#define SET_MEMORY_L(X, Y) \
+{ register unsigned char *_p; register int __y = (Y); \
+ _p = ((X) < memory_size ? h8_get_memory_buf (sd) + (X) : \
+ h8_get_eightbit_buf (sd) + ((X) & 0xff)); \
+ _p[0] = __y >> 24; _p[1] = __y >> 16; \
+ _p[2] = __y >> 8; _p[3] = __y >> 0; \
+}
+
+#define SET_MEMORY_W(X, Y) \
+{ register unsigned char *_p; register int __y = (Y); \
+ _p = ((X) < memory_size ? h8_get_memory_buf (sd) + (X) : \
+ h8_get_eightbit_buf (sd) + ((X) & 0xff)); \
+ _p[0] = __y >> 8; _p[1] = __y; \
+}
+
+#define SET_MEMORY_B(X, Y) \
+ ((X) < memory_size ? (h8_set_memory (sd, (X), (Y))) \
+ : (h8_set_eightbit (sd, (X) & 0xff, (Y))))
+
+/* Simulate a memory fetch.
+ Return 0 for success, -1 for failure.
+*/
+
+static int
+fetch_1 (SIM_DESC sd, ea_type *arg, int *val, int twice)
+{
+ int rn = arg->reg;
+ int abs = arg->literal;
+ int r;
+ int t;
+
+ if (val == NULL)
+ return -1; /* Paranoia. */
+
+ switch (arg->type)
+ {
+ /* Indexed register plus displacement mode:
+
+ This new family of addressing modes are similar to OP_DISP
+ (register plus displacement), with two differences:
+ 1) INDEXB uses only the least significant byte of the register,
+ INDEXW uses only the least significant word, and
+ INDEXL uses the entire register (just like OP_DISP).
+ and
+ 2) The displacement value in abs is multiplied by two
+ for SW-sized operations, and by four for SL-size.
+
+ This gives nine possible variations.
+ */
+
+ case X (OP_INDEXB, SB):
+ case X (OP_INDEXB, SW):
+ case X (OP_INDEXB, SL):
+ case X (OP_INDEXW, SB):
+ case X (OP_INDEXW, SW):
+ case X (OP_INDEXW, SL):
+ case X (OP_INDEXL, SB):
+ case X (OP_INDEXL, SW):
+ case X (OP_INDEXL, SL):
+ t = GET_L_REG (rn);
+ switch (OP_KIND (arg->type)) {
+ case OP_INDEXB: t &= 0xff; break;
+ case OP_INDEXW: t &= 0xffff; break;
+ case OP_INDEXL:
+ default: break;
+ }
+ switch (OP_SIZE (arg->type)) {
+ case SB:
+ *val = GET_MEMORY_B ((t * 1 + abs) & h8_get_mask (sd));
+ break;
+ case SW:
+ *val = GET_MEMORY_W ((t * 2 + abs) & h8_get_mask (sd));
+ break;
+ case SL:
+ *val = GET_MEMORY_L ((t * 4 + abs) & h8_get_mask (sd));
+ break;
+ }
+ break;
+
+ case X (OP_LOWREG, SB):
+ *val = GET_L_REG (rn) & 0xff;
+ break;
+ case X (OP_LOWREG, SW):
+ *val = GET_L_REG (rn) & 0xffff;
+ break;
+
+ case X (OP_REG, SB): /* Register direct, byte. */
+ *val = GET_B_REG (rn);
+ break;
+ case X (OP_REG, SW): /* Register direct, word. */
+ *val = GET_W_REG (rn);
+ break;
+ case X (OP_REG, SL): /* Register direct, long. */
+ *val = GET_L_REG (rn);
+ break;
+ case X (OP_IMM, SB): /* Immediate, byte. */
+ case X (OP_IMM, SW): /* Immediate, word. */
+ case X (OP_IMM, SL): /* Immediate, long. */
+ *val = abs;
+ break;
+ case X (OP_POSTINC, SB): /* Register indirect w/post-incr: byte. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_B (t & h8_get_mask (sd));
+ if (!twice)
+ t += 1;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+ case X (OP_POSTINC, SW): /* Register indirect w/post-incr: word. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_W (t & h8_get_mask (sd));
+ if (!twice)
+ t += 2;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+ case X (OP_POSTINC, SL): /* Register indirect w/post-incr: long. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_L (t & h8_get_mask (sd));
+ if (!twice)
+ t += 4;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+
+ case X (OP_POSTDEC, SB): /* Register indirect w/post-decr: byte. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_B (t & h8_get_mask (sd));
+ if (!twice)
+ t -= 1;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+ case X (OP_POSTDEC, SW): /* Register indirect w/post-decr: word. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_W (t & h8_get_mask (sd));
+ if (!twice)
+ t -= 2;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+ case X (OP_POSTDEC, SL): /* Register indirect w/post-decr: long. */
+ t = GET_L_REG (rn);
+ r = GET_MEMORY_L (t & h8_get_mask (sd));
+ if (!twice)
+ t -= 4;
+ SET_L_REG (rn, t);
+ *val = r;
+ break;
+
+ case X (OP_PREDEC, SB): /* Register indirect w/pre-decr: byte. */
+ t = GET_L_REG (rn) - 1;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_B (t);
+ break;
+
+ case X (OP_PREDEC, SW): /* Register indirect w/pre-decr: word. */
+ t = GET_L_REG (rn) - 2;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_W (t);
+ break;
+
+ case X (OP_PREDEC, SL): /* Register indirect w/pre-decr: long. */
+ t = GET_L_REG (rn) - 4;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_L (t);
+ break;
+
+ case X (OP_PREINC, SB): /* Register indirect w/pre-incr: byte. */
+ t = GET_L_REG (rn) + 1;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_B (t);
+ break;
+
+ case X (OP_PREINC, SW): /* Register indirect w/pre-incr: long. */
+ t = GET_L_REG (rn) + 2;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_W (t);
+ break;
+
+ case X (OP_PREINC, SL): /* Register indirect w/pre-incr: long. */
+ t = GET_L_REG (rn) + 4;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_L (t);
+ break;
+
+ case X (OP_DISP, SB): /* Register indirect w/displacement: byte. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_B (t);
+ break;
+
+ case X (OP_DISP, SW): /* Register indirect w/displacement: word. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ *val = GET_MEMORY_W (t);
+ break;
+
+ case X (OP_DISP, SL): /* Register indirect w/displacement: long. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ *val =GET_MEMORY_L (t);
+ break;
+
+ case X (OP_MEM, SL): /* Absolute memory address, long. */
+ t = GET_MEMORY_L (abs);
+ t &= h8_get_mask (sd);
+ *val = t;
+ break;
+
+ case X (OP_MEM, SW): /* Absolute memory address, word. */
+ t = GET_MEMORY_W (abs);
+ t &= h8_get_mask (sd);
+ *val = t;
+ break;
+
+ case X (OP_PCREL, SB): /* PC relative (for jump, branch etc). */
+ case X (OP_PCREL, SW):
+ case X (OP_PCREL, SL):
+ case X (OP_PCREL, SN):
+ *val = abs;
+ break;
+
+ case X (OP_MEM, SB): /* Why isn't this implemented? */
+ default:
+ sim_engine_set_run_state (sd, sim_stopped, SIGSEGV);
+ return -1;
+ }
+ return 0; /* Success. */
+}
+
+/* Normal fetch. */
+
+static int
+fetch (SIM_DESC sd, ea_type *arg, int *val)
+{
+ return fetch_1 (sd, arg, val, 0);
+}
+
+/* Fetch which will be followed by a store to the same location.
+ The difference being that we don't want to do a post-increment
+ or post-decrement at this time: we'll do it when we store. */
+
+static int
+fetch2 (SIM_DESC sd, ea_type *arg, int *val)
+{
+ return fetch_1 (sd, arg, val, 1);
+}
+
+/* Simulate a memory store.
+ Return 0 for success, -1 for failure.
+*/
+
+static int
+store_1 (SIM_DESC sd, ea_type *arg, int n, int twice)
+{
+ int rn = arg->reg;
+ int abs = arg->literal;
+ int t;
+
+ switch (arg->type)
+ {
+ /* Indexed register plus displacement mode:
+
+ This new family of addressing modes are similar to OP_DISP
+ (register plus displacement), with two differences:
+ 1) INDEXB uses only the least significant byte of the register,
+ INDEXW uses only the least significant word, and
+ INDEXL uses the entire register (just like OP_DISP).
+ and
+ 2) The displacement value in abs is multiplied by two
+ for SW-sized operations, and by four for SL-size.
+
+ This gives nine possible variations.
+ */
+
+ case X (OP_INDEXB, SB):
+ case X (OP_INDEXB, SW):
+ case X (OP_INDEXB, SL):
+ case X (OP_INDEXW, SB):
+ case X (OP_INDEXW, SW):
+ case X (OP_INDEXW, SL):
+ case X (OP_INDEXL, SB):
+ case X (OP_INDEXL, SW):
+ case X (OP_INDEXL, SL):
+ t = GET_L_REG (rn);
+ switch (OP_KIND (arg->type)) {
+ case OP_INDEXB: t &= 0xff; break;
+ case OP_INDEXW: t &= 0xffff; break;
+ case OP_INDEXL:
+ default: break;
+ }
+ switch (OP_SIZE (arg->type)) {
+ case SB:
+ SET_MEMORY_B ((t * 1 + abs) & h8_get_mask (sd), n);
+ break;
+ case SW:
+ SET_MEMORY_W ((t * 2 + abs) & h8_get_mask (sd), n);
+ break;
+ case SL:
+ SET_MEMORY_L ((t * 4 + abs) & h8_get_mask (sd), n);
+ break;
+ }
+ break;
+
+ case X (OP_REG, SB): /* Register direct, byte. */
+ SET_B_REG (rn, n);
+ break;
+ case X (OP_REG, SW): /* Register direct, word. */
+ SET_W_REG (rn, n);
+ break;
+ case X (OP_REG, SL): /* Register direct, long. */
+ SET_L_REG (rn, n);
+ break;
+
+ case X (OP_PREDEC, SB): /* Register indirect w/pre-decr, byte. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t -= 1;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_B (t, n);
+
+ break;
+ case X (OP_PREDEC, SW): /* Register indirect w/pre-decr, word. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t -= 2;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_W (t, n);
+ break;
+
+ case X (OP_PREDEC, SL): /* Register indirect w/pre-decr, long. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t -= 4;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_L (t, n);
+ break;
+
+ case X (OP_PREINC, SB): /* Register indirect w/pre-incr, byte. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t += 1;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_B (t, n);
+
+ break;
+ case X (OP_PREINC, SW): /* Register indirect w/pre-incr, word. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t += 2;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_W (t, n);
+ break;
+
+ case X (OP_PREINC, SL): /* Register indirect w/pre-incr, long. */
+ t = GET_L_REG (rn);
+ if (!twice)
+ t += 4;
+ SET_L_REG (rn, t);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_L (t, n);
+ break;
+
+ case X (OP_POSTDEC, SB): /* Register indirect w/post-decr, byte. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t - 1);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_B (t, n);
+ break;
+
+ case X (OP_POSTDEC, SW): /* Register indirect w/post-decr, word. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t - 2);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_W (t, n);
+ break;
+
+ case X (OP_POSTDEC, SL): /* Register indirect w/post-decr, long. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t - 4);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_L (t, n);
+ break;
+
+ case X (OP_POSTINC, SB): /* Register indirect w/post-incr, byte. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t + 1);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_B (t, n);
+ break;
+
+ case X (OP_POSTINC, SW): /* Register indirect w/post-incr, word. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t + 2);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_W (t, n);
+ break;
+
+ case X (OP_POSTINC, SL): /* Register indirect w/post-incr, long. */
+ t = GET_L_REG (rn);
+ SET_L_REG (rn, t + 4);
+ t &= h8_get_mask (sd);
+ SET_MEMORY_L (t, n);
+ break;
+
+ case X (OP_DISP, SB): /* Register indirect w/displacement, byte. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ SET_MEMORY_B (t, n);
+ break;
+
+ case X (OP_DISP, SW): /* Register indirect w/displacement, word. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ SET_MEMORY_W (t, n);
+ break;
+
+ case X (OP_DISP, SL): /* Register indirect w/displacement, long. */
+ t = GET_L_REG (rn) + abs;
+ t &= h8_get_mask (sd);
+ SET_MEMORY_L (t, n);
+ break;
+
+
+ case X (OP_MEM, SB): /* Why isn't this implemented? */
+ case X (OP_MEM, SW): /* Why isn't this implemented? */
+ case X (OP_MEM, SL): /* Why isn't this implemented? */
+ default:
+ sim_engine_set_run_state (sd, sim_stopped, SIGSEGV);
+ return -1;
+ }
+ return 0;
+}
+
+/* Normal store. */
+
+static int
+store (SIM_DESC sd, ea_type *arg, int n)
+{
+ return store_1 (sd, arg, n, 0);
+}
+
+/* Store which follows a fetch from the same location.
+ The difference being that we don't want to do a pre-increment
+ or pre-decrement at this time: it was already done when we fetched. */
+
+static int
+store2 (SIM_DESC sd, ea_type *arg, int n)
+{
+ return store_1 (sd, arg, n, 1);
+}
+
+static union
+{
+ short int i;
+ struct
+ {
+ char low;
+ char high;
+ }
+ u;
+} littleendian;
+
+/* Flag to be set whenever a new SIM_DESC object is created. */
+static int init_pointers_needed = 1;
+
+static void
+init_pointers (SIM_DESC sd)
+{
+ if (init_pointers_needed)
+ {
+ int i;
+
+ littleendian.i = 1;
+
+ if (h8300smode && !h8300_normal_mode)
+ memory_size = H8300S_MSIZE;
+ else if (h8300hmode && !h8300_normal_mode)
+ memory_size = H8300H_MSIZE;
+ else
+ memory_size = H8300_MSIZE;
+ /* `msize' must be a power of two. */
+ if ((memory_size & (memory_size - 1)) != 0)
+ {
+ (*sim_callback->printf_filtered)
+ (sim_callback,
+ "init_pointers: bad memory size %d, defaulting to %d.\n",
+ memory_size, memory_size = H8300S_MSIZE);
+ }
+
+ if (h8_get_memory_buf (sd))
+ free (h8_get_memory_buf (sd));
+ if (h8_get_cache_idx_buf (sd))
+ free (h8_get_cache_idx_buf (sd));
+ if (h8_get_eightbit_buf (sd))
+ free (h8_get_eightbit_buf (sd));
+
+ h8_set_memory_buf (sd, (unsigned char *)
+ calloc (sizeof (char), memory_size));
+ h8_set_cache_idx_buf (sd, (unsigned short *)
+ calloc (sizeof (short), memory_size));
+ sd->memory_size = memory_size;
+ h8_set_eightbit_buf (sd, (unsigned char *) calloc (sizeof (char), 256));
+
+ h8_set_mask (sd, memory_size - 1);
+
+ memset (h8_get_reg_buf (sd), 0, sizeof (((STATE_CPU (sd, 0))->regs)));
+
+ for (i = 0; i < 8; i++)
+ {
+ /* FIXME: rewrite using local buffer. */
+ unsigned char *p = (unsigned char *) (h8_get_reg_buf (sd) + i);
+ unsigned char *e = (unsigned char *) (h8_get_reg_buf (sd) + i + 1);
+ unsigned short *q = (unsigned short *) (h8_get_reg_buf (sd) + i);
+ unsigned short *u = (unsigned short *) (h8_get_reg_buf (sd) + i + 1);
+ h8_set_reg (sd, i, 0x00112233);
+
+ while (p < e)
+ {
+ if (*p == 0x22)
+ breg[i] = p;
+ if (*p == 0x33)
+ breg[i + 8] = p;
+ if (*p == 0x11)
+ breg[i + 16] = p;
+ if (*p == 0x00)
+ breg[i + 24] = p;
+ p++;
+ }
+
+ wreg[i] = wreg[i + 8] = 0;
+ while (q < u)
+ {
+ if (*q == 0x2233)
+ {
+ wreg[i] = q;
+ }
+ if (*q == 0x0011)
+ {
+ wreg[i + 8] = q;
+ }
+ q++;
+ }
+
+ if (wreg[i] == 0 || wreg[i + 8] == 0)
+ (*sim_callback->printf_filtered) (sim_callback,
+ "init_pointers: internal error.\n");
+
+ h8_set_reg (sd, i, 0);
+ lreg[i] = h8_get_reg_buf (sd) + i;
+ }
+
+ /* Note: sim uses pseudo-register ZERO as a zero register. */
+ lreg[ZERO_REGNUM] = h8_get_reg_buf (sd) + ZERO_REGNUM;
+ init_pointers_needed = 0;
+
+ /* Initialize the seg registers. */
+ if (!sd->sim_cache)
+ set_simcache_size (sd, CSIZE);
+ }
+}
+
+/* Grotty global variable for use by control_c signal handler. */
+static SIM_DESC control_c_sim_desc;
+
+static void
+control_c (int sig)
+{
+ sim_engine_set_run_state (control_c_sim_desc, sim_stopped, SIGINT);
+}
+
+int
+sim_stop (SIM_DESC sd)
+{
+ /* FIXME: use a real signal value. */
+ sim_engine_set_run_state (sd, sim_stopped, SIGINT);
+ return 1;
+}
+
+#define OBITOP(name, f, s, op) \
+case O (name, SB): \
+{ \
+ int m, tmp; \
+ \
+ if (f) \
+ if (fetch (sd, &code->dst, &ea)) \
+ goto end; \
+ if (fetch (sd, &code->src, &tmp)) \
+ goto end; \
+ m = 1 << (tmp & 7); \
+ op; \
+ if (s) \
+ if (store (sd, &code->dst,ea)) \
+ goto end; \
+ goto next; \
+}
+
+void
+sim_resume (SIM_DESC sd, int step, int siggnal)
+{
+ static int init1;
+ int cycles = 0;
+ int insts = 0;
+ int tick_start = get_now ();
+ void (*prev) ();
+ int poll_count = 0;
+ int res;
+ int tmp;
+ int rd;
+ int ea;
+ int bit;
+ int pc;
+ int c, nz, v, n, u, h, ui, intMaskBit;
+ int trace, intMask;
+ int oldmask;
+ enum sim_stop reason;
+ int sigrc;
+
+ init_pointers (sd);
+
+ control_c_sim_desc = sd;
+ prev = signal (SIGINT, control_c);
+
+ if (step)
+ {
+ sim_engine_set_run_state (sd, sim_stopped, SIGTRAP);
+ }
+ else
+ {
+ sim_engine_set_run_state (sd, sim_running, 0);
+ }
+
+ pc = h8_get_pc (sd);
+
+ /* The PC should never be odd. */
+ if (pc & 0x1)
+ {
+ sim_engine_set_run_state (sd, sim_stopped, SIGBUS);
+ return;
+ }
+
+ /* Get Status Register (flags). */
+ GETSR (sd);
+
+ if (h8300smode) /* Get exr. */
+ {
+ trace = (h8_get_exr (sd) >> 7) & 1;
+ intMask = h8_get_exr (sd) & 7;
+ }
+
+ oldmask = h8_get_mask (sd);
+ if (!h8300hmode || h8300_normal_mode)
+ h8_set_mask (sd, 0xffff);
+ do
+ {
+ unsigned short cidx;
+ decoded_inst *code;
+
+ top:
+ cidx = h8_get_cache_idx (sd, pc);
+ if (cidx == (unsigned short) -1 ||
+ cidx >= sd->sim_cache_size)
+ goto illegal;
+
+ code = sd->sim_cache + cidx;
+
+#if ADEBUG
+ if (debug)
+ {
+ printf ("%x %d %s\n", pc, code->opcode,
+ code->op ? code->op->name : "**");
+ }
+ h8_increment_stats (sd, code->opcode);
+#endif
+
+ if (code->opcode)
+ {
+ cycles += code->cycles;
+ insts++;
+ }
+
+ switch (code->opcode)
+ {
+ case 0:
+ /*
+ * This opcode is a fake for when we get to an
+ * instruction which hasnt been compiled
+ */
+ compile (sd, pc);
+ goto top;
+ break;
+
+ case O (O_MOVAB, SL):
+ case O (O_MOVAW, SL):
+ case O (O_MOVAL, SL):
+ /* 1) Evaluate 2nd argument (dst).
+ 2) Mask / zero extend according to whether 1st argument (src)
+ is INDEXB, INDEXW, or INDEXL.
+ 3) Left-shift the result by 0, 1 or 2, according to size of mova
+ (mova/b, mova/w, mova/l).
+ 4) Add literal value of 1st argument (src).
+ 5) Store result in 3rd argument (op3).
+ */
+
+ /* Alas, since this is the only instruction with 3 arguments,
+ decode doesn't handle them very well. Some fix-up is required.
+
+ a) The size of dst is determined by whether src is
+ INDEXB or INDEXW. */
+
+ if (OP_KIND (code->src.type) == OP_INDEXB)
+ code->dst.type = X (OP_KIND (code->dst.type), SB);
+ else if (OP_KIND (code->src.type) == OP_INDEXW)
+ code->dst.type = X (OP_KIND (code->dst.type), SW);
+
+ /* b) If op3 == null, then this is the short form of the insn.
+ Dst is the dispreg of src, and op3 is the 32-bit form
+ of the same register.
+ */
+
+ if (code->op3.type == 0)
+ {
+ /* Short form: src == INDEXB/INDEXW, dst == op3 == 0.
+ We get to compose dst and op3 as follows:
+
+ op3 is a 32-bit register, ID == src.reg.
+ dst is the same register, but 8 or 16 bits
+ depending on whether src is INDEXB or INDEXW.
+ */
+
+ code->op3.type = X (OP_REG, SL);
+ code->op3.reg = code->src.reg;
+ code->op3.literal = 0;
+
+ if (OP_KIND (code->src.type) == OP_INDEXB)
+ {
+ code->dst.type = X (OP_REG, SB);
+ code->dst.reg = code->op3.reg + 8;
+ }
+ else
+ code->dst.type = X (OP_REG, SW);
+ }
+
+ if (fetch (sd, &code->dst, &ea))
+ goto end;
+
+ switch (OP_KIND (code->src.type)) {
+ case OP_INDEXB: ea = ea & 0xff; break;
+ case OP_INDEXW: ea = ea & 0xffff; break;
+ case OP_INDEXL: break;
+ default: goto illegal;
+ }
+
+ switch (code->opcode) {
+ case O (O_MOVAB, SL): break;
+ case O (O_MOVAW, SL): ea = ea << 1; break;
+ case O (O_MOVAL, SL): ea = ea << 2; break;
+ default: goto illegal;
+ }
+
+ ea = ea + code->src.literal;
+
+ if (store (sd, &code->op3, ea))
+ goto end;
+
+ goto next;
+
+ case O (O_SUBX, SB): /* subx, extended sub */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -(ea + C);
+ res = rd + ea;
+ goto alu8;
+
+ case O (O_SUBX, SW): /* subx, extended sub */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -(ea + C);
+ res = rd + ea;
+ goto alu16;
+
+ case O (O_SUBX, SL): /* subx, extended sub */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -(ea + C);
+ res = rd + ea;
+ goto alu32;
+
+ case O (O_ADDX, SB): /* addx, extended add */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = ea + C;
+ res = rd + ea;
+ goto alu8;
+
+ case O (O_ADDX, SW): /* addx, extended add */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = ea + C;
+ res = rd + ea;
+ goto alu16;
+
+ case O (O_ADDX, SL): /* addx, extended add */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = ea + C;
+ res = rd + ea;
+ goto alu32;
+
+ case O (O_SUB, SB): /* sub.b */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto alu8;
+
+ case O (O_SUB, SW): /* sub.w */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto alu16;
+
+ case O (O_SUB, SL): /* sub.l */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto alu32;
+
+ case O (O_NEG, SB): /* neg.b */
+ /* Fetch ea. */
+ if (fetch2 (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ rd = 0;
+ res = rd + ea;
+ goto alu8;
+
+ case O (O_NEG, SW): /* neg.w */
+ /* Fetch ea. */
+ if (fetch2 (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ rd = 0;
+ res = rd + ea;
+ goto alu16;
+
+ case O (O_NEG, SL): /* neg.l */
+ /* Fetch ea. */
+ if (fetch2 (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ rd = 0;
+ res = rd + ea;
+ goto alu32;
+
+ case O (O_ADD, SB): /* add.b */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ res = rd + ea;
+ goto alu8;
+
+ case O (O_ADD, SW): /* add.w */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ res = rd + ea;
+ goto alu16;
+
+ case O (O_ADD, SL): /* add.l */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ res = rd + ea;
+ goto alu32;
+
+ case O (O_AND, SB): /* and.b */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd & ea;
+ goto log8;
+
+ case O (O_AND, SW): /* and.w */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd & ea;
+ goto log16;
+
+ case O (O_AND, SL): /* and.l */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd & ea;
+ goto log32;
+
+ case O (O_OR, SB): /* or.b */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd | ea;
+ goto log8;
+
+ case O (O_OR, SW): /* or.w */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd | ea;
+ goto log16;
+
+ case O (O_OR, SL): /* or.l */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd | ea;
+ goto log32;
+
+ case O (O_XOR, SB): /* xor.b */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd ^ ea;
+ goto log8;
+
+ case O (O_XOR, SW): /* xor.w */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd ^ ea;
+ goto log16;
+
+ case O (O_XOR, SL): /* xor.l */
+ /* Fetch rd and ea. */
+ if (fetch (sd, &code->src, &ea) || fetch2 (sd, &code->dst, &rd))
+ goto end;
+ res = rd ^ ea;
+ goto log32;
+
+ case O (O_MOV, SB):
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto just_flags_log8;
+ case O (O_MOV, SW):
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto just_flags_log16;
+ case O (O_MOV, SL):
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto just_flags_log32;
+
+ case O (O_MOVMD, SB): /* movmd.b */
+ ea = GET_W_REG (4);
+ if (ea == 0)
+ ea = 0x10000;
+
+ while (ea--)
+ {
+ rd = GET_MEMORY_B (GET_L_REG (5));
+ SET_MEMORY_B (GET_L_REG (6), rd);
+ SET_L_REG (5, GET_L_REG (5) + 1);
+ SET_L_REG (6, GET_L_REG (6) + 1);
+ SET_W_REG (4, ea);
+ }
+ goto next;
+
+ case O (O_MOVMD, SW): /* movmd.w */
+ ea = GET_W_REG (4);
+ if (ea == 0)
+ ea = 0x10000;
+
+ while (ea--)
+ {
+ rd = GET_MEMORY_W (GET_L_REG (5));
+ SET_MEMORY_W (GET_L_REG (6), rd);
+ SET_L_REG (5, GET_L_REG (5) + 2);
+ SET_L_REG (6, GET_L_REG (6) + 2);
+ SET_W_REG (4, ea);
+ }
+ goto next;
+
+ case O (O_MOVMD, SL): /* movmd.l */
+ ea = GET_W_REG (4);
+ if (ea == 0)
+ ea = 0x10000;
+
+ while (ea--)
+ {
+ rd = GET_MEMORY_L (GET_L_REG (5));
+ SET_MEMORY_L (GET_L_REG (6), rd);
+ SET_L_REG (5, GET_L_REG (5) + 4);
+ SET_L_REG (6, GET_L_REG (6) + 4);
+ SET_W_REG (4, ea);
+ }
+ goto next;
+
+ case O (O_MOVSD, SB): /* movsd.b */
+ /* This instruction implements strncpy, with a conditional branch.
+ r4 contains n, r5 contains src, and r6 contains dst.
+ The 16-bit displacement operand is added to the pc
+ if and only if the end of string is reached before
+ n bytes are transferred. */
+
+ ea = GET_L_REG (4) & 0xffff;
+ if (ea == 0)
+ ea = 0x10000;
+
+ while (ea--)
+ {
+ rd = GET_MEMORY_B (GET_L_REG (5));
+ SET_MEMORY_B (GET_L_REG (6), rd);
+ SET_L_REG (5, GET_L_REG (5) + 1);
+ SET_L_REG (6, GET_L_REG (6) + 1);
+ SET_W_REG (4, ea);
+ if (rd == 0)
+ goto condtrue;
+ }
+ goto next;
+
+ case O (O_EEPMOV, SB): /* eepmov.b */
+ case O (O_EEPMOV, SW): /* eepmov.w */
+ if (h8300hmode || h8300smode)
+ {
+ register unsigned char *_src, *_dst;
+ unsigned int count = ((code->opcode == O (O_EEPMOV, SW))
+ ? h8_get_reg (sd, R4_REGNUM) & 0xffff
+ : h8_get_reg (sd, R4_REGNUM) & 0xff);
+
+ _src = (h8_get_reg (sd, R5_REGNUM) < memory_size
+ ? h8_get_memory_buf (sd) + h8_get_reg (sd, R5_REGNUM)
+ : h8_get_eightbit_buf (sd) +
+ (h8_get_reg (sd, R5_REGNUM) & 0xff));
+ if ((_src + count) >= (h8_get_memory_buf (sd) + memory_size))
+ {
+ if ((_src + count) >= (h8_get_eightbit_buf (sd) + 0x100))
+ goto illegal;
+ }
+ _dst = (h8_get_reg (sd, R6_REGNUM) < memory_size
+ ? h8_get_memory_buf (sd) + h8_get_reg (sd, R6_REGNUM)
+ : h8_get_eightbit_buf (sd) +
+ (h8_get_reg (sd, R6_REGNUM) & 0xff));
+
+ if ((_dst + count) >= (h8_get_memory_buf (sd) + memory_size))
+ {
+ if ((_dst + count) >= (h8_get_eightbit_buf (sd) + 0x100))
+ goto illegal;
+ }
+ memcpy (_dst, _src, count);
+
+ h8_set_reg (sd, R5_REGNUM, h8_get_reg (sd, R5_REGNUM) + count);
+ h8_set_reg (sd, R6_REGNUM, h8_get_reg (sd, R6_REGNUM) + count);
+ h8_set_reg (sd, R4_REGNUM, h8_get_reg (sd, R4_REGNUM) &
+ ((code->opcode == O (O_EEPMOV, SW))
+ ? (~0xffff) : (~0xff)));
+ cycles += 2 * count;
+ goto next;
+ }
+ goto illegal;
+
+ case O (O_ADDS, SL): /* adds (.l) */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ SET_L_REG (code->dst.reg,
+ GET_L_REG (code->dst.reg)
+ + code->src.literal);
+
+ goto next;
+
+ case O (O_SUBS, SL): /* subs (.l) */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ SET_L_REG (code->dst.reg,
+ GET_L_REG (code->dst.reg)
+ - code->src.literal);
+ goto next;
+
+ case O (O_CMP, SB): /* cmp.b */
+ if (fetch (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto just_flags_alu8;
+
+ case O (O_CMP, SW): /* cmp.w */
+ if (fetch (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto just_flags_alu16;
+
+ case O (O_CMP, SL): /* cmp.l */
+ if (fetch (sd, &code->dst, &rd))
+ goto end;
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+ ea = -ea;
+ res = rd + ea;
+ goto just_flags_alu32;
+
+ case O (O_DEC, SB): /* dec.b */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_B_REG (code->src.reg);
+ ea = -1;
+ res = rd + ea;
+ SET_B_REG (code->src.reg, res);
+ goto just_flags_inc8;
+
+ case O (O_DEC, SW): /* dec.w */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_W_REG (code->dst.reg);
+ ea = -code->src.literal;
+ res = rd + ea;
+ SET_W_REG (code->dst.reg, res);
+ goto just_flags_inc16;
+
+ case O (O_DEC, SL): /* dec.l */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_L_REG (code->dst.reg);
+ ea = -code->src.literal;
+ res = rd + ea;
+ SET_L_REG (code->dst.reg, res);
+ goto just_flags_inc32;
+
+ case O (O_INC, SB): /* inc.b */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_B_REG (code->src.reg);
+ ea = 1;
+ res = rd + ea;
+ SET_B_REG (code->src.reg, res);
+ goto just_flags_inc8;
+
+ case O (O_INC, SW): /* inc.w */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_W_REG (code->dst.reg);
+ ea = code->src.literal;
+ res = rd + ea;
+ SET_W_REG (code->dst.reg, res);
+ goto just_flags_inc16;
+
+ case O (O_INC, SL): /* inc.l */
+ /* FIXME fetch.
+ * This insn only uses register operands, but still
+ * it would be cleaner to use fetch and store... */
+ rd = GET_L_REG (code->dst.reg);
+ ea = code->src.literal;
+ res = rd + ea;
+ SET_L_REG (code->dst.reg, res);
+ goto just_flags_inc32;
+
+ case O (O_LDC, SB): /* ldc.b */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ goto setc;
+
+ case O (O_LDC, SW): /* ldc.w */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+
+ /* Word operand, value from MSB, must be shifted. */
+ res >>= 8;
+ goto setc;
+
+ case O (O_LDC, SL): /* ldc.l */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ switch (code->dst.type) {
+ case X (OP_SBR, SL):
+ h8_set_sbr (sd, res);
+ break;
+ case X (OP_VBR, SL):
+ h8_set_vbr (sd, res);
+ break;
+ default:
+ goto illegal;
+ }
+ goto next;
+
+ case O (O_STC, SW): /* stc.w */
+ case O (O_STC, SB): /* stc.b */
+ if (code->src.type == X (OP_CCR, SB))
+ {
+ BUILDSR (sd);
+ res = h8_get_ccr (sd);
+ }
+ else if (code->src.type == X (OP_EXR, SB) && h8300smode)
+ {
+ if (h8300smode)
+ h8_set_exr (sd, (trace << 7) | intMask);
+ res = h8_get_exr (sd);
+ }
+ else
+ goto illegal;
+
+ /* Word operand, value to MSB, must be shifted. */
+ if (code->opcode == X (O_STC, SW))
+ res <<= 8;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+ case O (O_STC, SL): /* stc.l */
+ switch (code->src.type) {
+ case X (OP_SBR, SL):
+ res = h8_get_sbr (sd);
+ break;
+ case X (OP_VBR, SL):
+ res = h8_get_vbr (sd);
+ break;
+ default:
+ goto illegal;
+ }
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_ANDC, SB): /* andc.b */
+ if (code->dst.type == X (OP_CCR, SB))
+ {
+ BUILDSR (sd);
+ rd = h8_get_ccr (sd);
+ }
+ else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
+ {
+ if (h8300smode)
+ h8_set_exr (sd, (trace << 7) | intMask);
+ rd = h8_get_exr (sd);
+ }
+ else
+ goto illegal;
+ ea = code->src.literal;
+ res = rd & ea;
+ goto setc;
+
+ case O (O_ORC, SB): /* orc.b */
+ if (code->dst.type == X (OP_CCR, SB))
+ {
+ BUILDSR (sd);
+ rd = h8_get_ccr (sd);
+ }
+ else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
+ {
+ if (h8300smode)
+ h8_set_exr (sd, (trace << 7) | intMask);
+ rd = h8_get_exr (sd);
+ }
+ else
+ goto illegal;
+ ea = code->src.literal;
+ res = rd | ea;
+ goto setc;
+
+ case O (O_XORC, SB): /* xorc.b */
+ if (code->dst.type == X (OP_CCR, SB))
+ {
+ BUILDSR (sd);
+ rd = h8_get_ccr (sd);
+ }
+ else if (code->dst.type == X (OP_EXR, SB) && h8300smode)
+ {
+ if (h8300smode)
+ h8_set_exr (sd, (trace << 7) | intMask);
+ rd = h8_get_exr (sd);
+ }
+ else
+ goto illegal;
+ ea = code->src.literal;
+ res = rd ^ ea;
+ goto setc;
+
+ case O (O_BRAS, SB): /* bra/s */
+ /* This is basically an ordinary branch, with a delay slot. */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+
+ if ((res & 1) == 0)
+ goto illegal;
+
+ res -= 1;
+
+ /* Execution continues at next instruction, but
+ delayed_branch is set up for next cycle. */
+ h8_set_delayed_branch (sd, code->next_pc + res);
+ pc = code->next_pc;
+ goto end;
+
+ case O (O_BRAB, SB): /* bra rd.b */
+ case O (O_BRAW, SW): /* bra rd.w */
+ case O (O_BRAL, SL): /* bra erd.l */
+ if (fetch (sd, &code->src, &rd))
+ goto end;
+ switch (OP_SIZE (code->opcode)) {
+ case SB: rd &= 0xff; break;
+ case SW: rd &= 0xffff; break;
+ case SL: rd &= 0xffffffff; break;
+ }
+ pc = code->next_pc + rd;
+ goto end;
+
+ case O (O_BRABC, SB): /* bra/bc, branch if bit clear */
+ case O (O_BRABS, SB): /* bra/bs, branch if bit set */
+ case O (O_BSRBC, SB): /* bsr/bc, call if bit clear */
+ case O (O_BSRBS, SB): /* bsr/bs, call if bit set */
+ if (fetch (sd, &code->dst, &rd) ||
+ fetch (sd, &code->src, &bit))
+ goto end;
+
+ if (code->opcode == O (O_BRABC, SB) || /* branch if clear */
+ code->opcode == O (O_BSRBC, SB)) /* call if clear */
+ {
+ if ((rd & (1 << bit))) /* no branch */
+ goto next;
+ }
+ else /* branch/call if set */
+ {
+ if (!(rd & (1 << bit))) /* no branch */
+ goto next;
+ }
+
+ if (fetch (sd, &code->op3, &res)) /* branch */
+ goto end;
+ pc = code->next_pc + res;
+
+ if (code->opcode == O (O_BRABC, SB) ||
+ code->opcode == O (O_BRABS, SB)) /* branch */
+ goto end;
+ else /* call */
+ goto call;
+
+ case O (O_BRA, SN):
+ case O (O_BRA, SL):
+ case O (O_BRA, SW):
+ case O (O_BRA, SB): /* bra, branch always */
+ if (1)
+ goto condtrue;
+ goto next;
+
+ case O (O_BRN, SB): /* brn, ;-/ branch never? */
+ if (0)
+ goto condtrue;
+ goto next;
+
+ case O (O_BHI, SB): /* bhi */
+ if ((C || Z) == 0)
+ goto condtrue;
+ goto next;
+
+
+ case O (O_BLS, SB): /* bls */
+ if ((C || Z))
+ goto condtrue;
+ goto next;
+
+ case O (O_BCS, SB): /* bcs, branch if carry set */
+ if ((C == 1))
+ goto condtrue;
+ goto next;
+
+ case O (O_BCC, SB): /* bcc, branch if carry clear */
+ if ((C == 0))
+ goto condtrue;
+ goto next;
+
+ case O (O_BEQ, SB): /* beq, branch if zero set */
+ if (Z)
+ goto condtrue;
+ goto next;
+ case O (O_BGT, SB): /* bgt */
+ if (((Z || (N ^ V)) == 0))
+ goto condtrue;
+ goto next;
+
+ case O (O_BLE, SB): /* ble */
+ if (((Z || (N ^ V)) == 1))
+ goto condtrue;
+ goto next;
+
+ case O (O_BGE, SB): /* bge */
+ if ((N ^ V) == 0)
+ goto condtrue;
+ goto next;
+ case O (O_BLT, SB): /* blt */
+ if ((N ^ V))
+ goto condtrue;
+ goto next;
+ case O (O_BMI, SB): /* bmi */
+ if ((N))
+ goto condtrue;
+ goto next;
+ case O (O_BNE, SB): /* bne, branch if zero clear */
+ if ((Z == 0))
+ goto condtrue;
+ goto next;
+
+ case O (O_BPL, SB): /* bpl */
+ if (N == 0)
+ goto condtrue;
+ goto next;
+ case O (O_BVC, SB): /* bvc */
+ if ((V == 0))
+ goto condtrue;
+ goto next;
+ case O (O_BVS, SB): /* bvs */
+ if ((V == 1))
+ goto condtrue;
+ goto next;
+
+ /* Trap for Command Line setup. */
+ case O (O_SYS_CMDLINE, SB):
+ {
+ int i = 0; /* Loop counter. */
+ int j = 0; /* Loop counter. */
+ int ind_arg_len = 0; /* Length of each argument. */
+ int no_of_args = 0; /* The no. or cmdline args. */
+ int current_location = 0; /* Location of string. */
+ int old_sp = 0; /* The Initial Stack Pointer. */
+ int no_of_slots = 0; /* No. of slots required on the stack
+ for storing cmdline args. */
+ int sp_move = 0; /* No. of locations by which the stack needs
+ to grow. */
+ int new_sp = 0; /* The final stack pointer location passed
+ back. */
+ int *argv_ptrs; /* Pointers of argv strings to be stored. */
+ int argv_ptrs_location = 0; /* Location of pointers to cmdline
+ args on the stack. */
+ int char_ptr_size = 0; /* Size of a character pointer on
+ target machine. */
+ int addr_cmdline = 0; /* Memory location where cmdline has
+ to be stored. */
+ int size_cmdline = 0; /* Size of cmdline. */
+
+ /* Set the address of 256 free locations where command line is
+ stored. */
+ addr_cmdline = cmdline_location();
+ h8_set_reg (sd, 0, addr_cmdline);
+
+ /* Counting the no. of commandline arguments. */
+ for (i = 0; h8_get_cmdline_arg (sd, i) != NULL; i++)
+ continue;
+
+ /* No. of arguments in the command line. */
+ no_of_args = i;
+
+ /* Current location is just a temporary variable,which we are
+ setting to the point to the start of our commandline string. */
+ current_location = addr_cmdline;
+
+ /* Allocating space for storing pointers of the command line
+ arguments. */
+ argv_ptrs = (int *) malloc (sizeof (int) * no_of_args);
+
+ /* Setting char_ptr_size to the sizeof (char *) on the different
+ architectures. */
+ if ((h8300hmode || h8300smode) && !h8300_normal_mode)
+ {
+ char_ptr_size = 4;
+ }
+ else
+ {
+ char_ptr_size = 2;
+ }
+
+ for (i = 0; i < no_of_args; i++)
+ {
+ ind_arg_len = 0;
+
+ /* The size of the commandline argument. */
+ ind_arg_len = strlen (h8_get_cmdline_arg (sd, i)) + 1;
+
+ /* The total size of the command line string. */
+ size_cmdline += ind_arg_len;
+
+ /* As we have only 256 bytes, we need to provide a graceful
+ exit. Anyways, a program using command line arguments
+ where we cannot store all the command line arguments
+ given may behave unpredictably. */
+ if (size_cmdline >= 256)
+ {
+ h8_set_reg (sd, 0, 0);
+ goto next;
+ }
+ else
+ {
+ /* current_location points to the memory where the next
+ commandline argument is stored. */
+ argv_ptrs[i] = current_location;
+ for (j = 0; j < ind_arg_len; j++)
+ {
+ SET_MEMORY_B ((current_location +
+ (sizeof (char) * j)),
+ *(h8_get_cmdline_arg (sd, i) +
+ sizeof (char) * j));
+ }
+
+ /* Setting current_location to the starting of next
+ argument. */
+ current_location += ind_arg_len;
+ }
+ }
+
+ /* This is the original position of the stack pointer. */
+ old_sp = h8_get_reg (sd, SP_REGNUM);
+
+ /* We need space from the stack to store the pointers to argvs. */
+ /* As we will infringe on the stack, we need to shift the stack
+ pointer so that the data is not overwritten. We calculate how
+ much space is required. */
+ sp_move = (no_of_args) * (char_ptr_size);
+
+ /* The final position of stack pointer, we have thus taken some
+ space from the stack. */
+ new_sp = old_sp - sp_move;
+
+ /* Temporary variable holding value where the argv pointers need
+ to be stored. */
+ argv_ptrs_location = new_sp;
+
+ /* The argv pointers are stored at sequential locations. As per
+ the H8300 ABI. */
+ for (i = 0; i < no_of_args; i++)
+ {
+ /* Saving the argv pointer. */
+ if ((h8300hmode || h8300smode) && !h8300_normal_mode)
+ {
+ SET_MEMORY_L (argv_ptrs_location, argv_ptrs[i]);
+ }
+ else
+ {
+ SET_MEMORY_W (argv_ptrs_location, argv_ptrs[i]);
+ }
+
+ /* The next location where the pointer to the next argv
+ string has to be stored. */
+ argv_ptrs_location += char_ptr_size;
+ }
+
+ /* Required by POSIX, Setting 0x0 at the end of the list of argv
+ pointers. */
+ if ((h8300hmode || h8300smode) && !h8300_normal_mode)
+ {
+ SET_MEMORY_L (old_sp, 0x0);
+ }
+ else
+ {
+ SET_MEMORY_W (old_sp, 0x0);
+ }
+
+ /* Freeing allocated memory. */
+ free (argv_ptrs);
+ for (i = 0; i <= no_of_args; i++)
+ {
+ free (h8_get_cmdline_arg (sd, i));
+ }
+ free (h8_get_command_line (sd));
+
+ /* The no. of argv arguments are returned in Reg 0. */
+ h8_set_reg (sd, 0, no_of_args);
+ /* The Pointer to argv in Register 1. */
+ h8_set_reg (sd, 1, new_sp);
+ /* Setting the stack pointer to the new value. */
+ h8_set_reg (sd, SP_REGNUM, new_sp);
+ }
+ goto next;
+
+ /* System call processing starts. */
+ case O (O_SYS_OPEN, SB):
+ {
+ int len = 0; /* Length of filename. */
+ char *filename; /* Filename would go here. */
+ char temp_char; /* Temporary character */
+ int mode = 0; /* Mode bits for the file. */
+ int open_return; /* Return value of open, file descriptor. */
+ int i; /* Loop counter */
+ int filename_ptr; /* Pointer to filename in cpu memory. */
+
+ /* Setting filename_ptr to first argument of open, */
+ /* and trying to get mode. */
+ if ((h8300sxmode || h8300hmode || h8300smode) && !h8300_normal_mode)
+ {
+ filename_ptr = GET_L_REG (0);
+ mode = GET_MEMORY_L (h8_get_reg (sd, SP_REGNUM) + 4);
+ }
+ else
+ {
+ filename_ptr = GET_W_REG (0);
+ mode = GET_MEMORY_W (h8_get_reg (sd, SP_REGNUM) + 2);
+ }
+
+ /* Trying to find the length of the filename. */
+ temp_char = GET_MEMORY_B (h8_get_reg (sd, 0));
+
+ len = 1;
+ while (temp_char != '\0')
+ {
+ temp_char = GET_MEMORY_B (filename_ptr + len);
+ len++;
+ }
+
+ /* Allocating space for the filename. */
+ filename = (char *) malloc (sizeof (char) * len);
+
+ /* String copying the filename from memory. */
+ for (i = 0; i < len; i++)
+ {
+ temp_char = GET_MEMORY_B (filename_ptr + i);
+ filename[i] = temp_char;
+ }
+
+ /* Callback to open and return the file descriptor. */
+ open_return = sim_callback->open (sim_callback, filename, mode);
+
+ /* Return value in register 0. */
+ h8_set_reg (sd, 0, open_return);
+
+ /* Freeing memory used for filename. */
+ free (filename);
+ }
+ goto next;
+
+ case O (O_SYS_READ, SB):
+ {
+ char *char_ptr; /* Where characters read would be stored. */
+ int fd; /* File descriptor */
+ int buf_size; /* BUF_SIZE parameter in read. */
+ int i = 0; /* Temporary Loop counter */
+ int read_return = 0; /* Return value from callback to
+ read. */
+
+ fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+ buf_size = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
+
+ char_ptr = (char *) malloc (sizeof (char) * buf_size);
+
+ /* Callback to read and return the no. of characters read. */
+ read_return =
+ sim_callback->read (sim_callback, fd, char_ptr, buf_size);
+
+ /* The characters read are stored in cpu memory. */
+ for (i = 0; i < buf_size; i++)
+ {
+ SET_MEMORY_B ((h8_get_reg (sd, 1) + (sizeof (char) * i)),
+ *(char_ptr + (sizeof (char) * i)));
+ }
+
+ /* Return value in Register 0. */
+ h8_set_reg (sd, 0, read_return);
+
+ /* Freeing memory used as buffer. */
+ free (char_ptr);
+ }
+ goto next;
+
+ case O (O_SYS_WRITE, SB):
+ {
+ int fd; /* File descriptor */
+ char temp_char; /* Temporary character */
+ int len; /* Length of write, Parameter II to write. */
+ int char_ptr; /* Character Pointer, Parameter I of write. */
+ char *ptr; /* Where characters to be written are stored.
+ */
+ int write_return; /* Return value from callback to write. */
+ int i = 0; /* Loop counter */
+
+ fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+ char_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
+ len = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
+
+ /* Allocating space for the characters to be written. */
+ ptr = (char *) malloc (sizeof (char) * len);
+
+ /* Fetching the characters from cpu memory. */
+ for (i = 0; i < len; i++)
+ {
+ temp_char = GET_MEMORY_B (char_ptr + i);
+ ptr[i] = temp_char;
+ }
+
+ /* Callback write and return the no. of characters written. */
+ write_return = sim_callback->write (sim_callback, fd, ptr, len);
+
+ /* Return value in Register 0. */
+ h8_set_reg (sd, 0, write_return);
+
+ /* Freeing memory used as buffer. */
+ free (ptr);
+ }
+ goto next;
+
+ case O (O_SYS_LSEEK, SB):
+ {
+ int fd; /* File descriptor */
+ int offset; /* Offset */
+ int origin; /* Origin */
+ int lseek_return; /* Return value from callback to lseek. */
+
+ fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+ offset = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
+ origin = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (2) : GET_W_REG (2);
+
+ /* Callback lseek and return offset. */
+ lseek_return =
+ sim_callback->lseek (sim_callback, fd, offset, origin);
+
+ /* Return value in register 0. */
+ h8_set_reg (sd, 0, lseek_return);
+ }
+ goto next;
+
+ case O (O_SYS_CLOSE, SB):
+ {
+ int fd; /* File descriptor */
+ int close_return; /* Return value from callback to close. */
+
+ fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+
+ /* Callback close and return. */
+ close_return = sim_callback->close (sim_callback, fd);
+
+ /* Return value in register 0. */
+ h8_set_reg (sd, 0, close_return);
+ }
+ goto next;
+
+ case O (O_SYS_FSTAT, SB):
+ {
+ int fd; /* File descriptor */
+ struct stat stat_rec; /* Stat record */
+ int fstat_return; /* Return value from callback to stat. */
+ int stat_ptr; /* Pointer to stat record. */
+ char *temp_stat_ptr; /* Temporary stat_rec pointer. */
+
+ fd = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+
+ /* Setting stat_ptr to second argument of stat. */
+ stat_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
+
+ /* Callback stat and return. */
+ fstat_return = sim_callback->fstat (sim_callback, fd, &stat_rec);
+
+ /* Have stat_ptr point to starting of stat_rec. */
+ temp_stat_ptr = (char *) (&stat_rec);
+
+ /* Setting up the stat structure returned. */
+ SET_MEMORY_W (stat_ptr, stat_rec.st_dev);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_ino);
+ stat_ptr += 2;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_mode);
+ stat_ptr += 4;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_nlink);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_uid);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_gid);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_rdev);
+ stat_ptr += 2;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_size);
+ stat_ptr += 4;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_atime);
+ stat_ptr += 8;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_mtime);
+ stat_ptr += 8;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_ctime);
+
+ /* Return value in register 0. */
+ h8_set_reg (sd, 0, fstat_return);
+ }
+ goto next;
+
+ case O (O_SYS_STAT, SB):
+ {
+ int len = 0; /* Length of filename. */
+ char *filename; /* Filename would go here. */
+ char temp_char; /* Temporary character */
+ int filename_ptr; /* Pointer to filename in cpu memory. */
+ struct stat stat_rec; /* Stat record */
+ int stat_return; /* Return value from callback to stat */
+ int stat_ptr; /* Pointer to stat record. */
+ char *temp_stat_ptr; /* Temporary stat_rec pointer. */
+ int i = 0; /* Loop Counter */
+
+ /* Setting filename_ptr to first argument of open. */
+ filename_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (0) : GET_W_REG (0);
+
+ /* Trying to find the length of the filename. */
+ temp_char = GET_MEMORY_B (h8_get_reg (sd, 0));
+
+ len = 1;
+ while (temp_char != '\0')
+ {
+ temp_char = GET_MEMORY_B (filename_ptr + len);
+ len++;
+ }
+
+ /* Allocating space for the filename. */
+ filename = (char *) malloc (sizeof (char) * len);
+
+ /* String copying the filename from memory. */
+ for (i = 0; i < len; i++)
+ {
+ temp_char = GET_MEMORY_B (filename_ptr + i);
+ filename[i] = temp_char;
+ }
+
+ /* Setting stat_ptr to second argument of stat. */
+ /* stat_ptr = h8_get_reg (sd, 1); */
+ stat_ptr = (h8300hmode && !h8300_normal_mode) ? GET_L_REG (1) : GET_W_REG (1);
+
+ /* Callback stat and return. */
+ stat_return =
+ sim_callback->stat (sim_callback, filename, &stat_rec);
+
+ /* Have stat_ptr point to starting of stat_rec. */
+ temp_stat_ptr = (char *) (&stat_rec);
+
+ /* Freeing memory used for filename. */
+ free (filename);
+
+ /* Setting up the stat structure returned. */
+ SET_MEMORY_W (stat_ptr, stat_rec.st_dev);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_ino);
+ stat_ptr += 2;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_mode);
+ stat_ptr += 4;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_nlink);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_uid);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_gid);
+ stat_ptr += 2;
+ SET_MEMORY_W (stat_ptr, stat_rec.st_rdev);
+ stat_ptr += 2;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_size);
+ stat_ptr += 4;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_atime);
+ stat_ptr += 8;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_mtime);
+ stat_ptr += 8;
+ SET_MEMORY_L (stat_ptr, stat_rec.st_ctime);
+
+ /* Return value in register 0. */
+ h8_set_reg (sd, 0, stat_return);
+ }
+ goto next;
+ /* End of system call processing. */
+
+ case O (O_NOT, SB): /* not.b */
+ if (fetch2 (sd, &code->src, &rd))
+ goto end;
+ rd = ~rd;
+ v = 0;
+ goto shift8;
+
+ case O (O_NOT, SW): /* not.w */
+ if (fetch2 (sd, &code->src, &rd))
+ goto end;
+ rd = ~rd;
+ v = 0;
+ goto shift16;
+
+ case O (O_NOT, SL): /* not.l */
+ if (fetch2 (sd, &code->src, &rd))
+ goto end;
+ rd = ~rd;
+ v = 0;
+ goto shift32;
+
+ case O (O_SHLL, SB): /* shll.b */
+ case O (O_SHLR, SB): /* shlr.b */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
+ ea = 1; /* unary op */
+ else /* binary op */
+ fetch (sd, &code->src, &ea);
+
+ if (code->opcode == O (O_SHLL, SB))
+ {
+ v = (ea > 8);
+ c = rd & (0x80 >> (ea - 1));
+ rd <<= ea;
+ }
+ else
+ {
+ v = 0;
+ c = rd & (1 << (ea - 1));
+ rd = (unsigned char) rd >> ea;
+ }
+ goto shift8;
+
+ case O (O_SHLL, SW): /* shll.w */
+ case O (O_SHLR, SW): /* shlr.w */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
+ ea = 1; /* unary op */
+ else
+ fetch (sd, &code->src, &ea);
+
+ if (code->opcode == O (O_SHLL, SW))
+ {
+ v = (ea > 16);
+ c = rd & (0x8000 >> (ea - 1));
+ rd <<= ea;
+ }
+ else
+ {
+ v = 0;
+ c = rd & (1 << (ea - 1));
+ rd = (unsigned short) rd >> ea;
+ }
+ goto shift16;
+
+ case O (O_SHLL, SL): /* shll.l */
+ case O (O_SHLR, SL): /* shlr.l */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (memcmp (&code->src, &code->dst, sizeof (code->src)) == 0)
+ ea = 1; /* unary op */
+ else
+ fetch (sd, &code->src, &ea);
+
+ if (code->opcode == O (O_SHLL, SL))
+ {
+ v = (ea > 32);
+ c = rd & (0x80000000 >> (ea - 1));
+ rd <<= ea;
+ }
+ else
+ {
+ v = 0;
+ c = rd & (1 << (ea - 1));
+ rd = (unsigned int) rd >> ea;
+ }
+ goto shift32;
+
+ case O (O_SHAL, SB):
+ case O (O_SHAR, SB):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SB))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ if (code->opcode == O (O_SHAL, SB))
+ {
+ c = rd & (0x80 >> (ea - 1));
+ res = rd >> (7 - ea);
+ v = ((res & 1) && !(res & 2))
+ || (!(res & 1) && (res & 2));
+ rd <<= ea;
+ }
+ else
+ {
+ c = rd & (1 << (ea - 1));
+ v = 0;
+ rd = ((signed char) rd) >> ea;
+ }
+ goto shift8;
+
+ case O (O_SHAL, SW):
+ case O (O_SHAR, SW):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SW))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ if (code->opcode == O (O_SHAL, SW))
+ {
+ c = rd & (0x8000 >> (ea - 1));
+ res = rd >> (15 - ea);
+ v = ((res & 1) && !(res & 2))
+ || (!(res & 1) && (res & 2));
+ rd <<= ea;
+ }
+ else
+ {
+ c = rd & (1 << (ea - 1));
+ v = 0;
+ rd = ((signed short) rd) >> ea;
+ }
+ goto shift16;
+
+ case O (O_SHAL, SL):
+ case O (O_SHAR, SL):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SL))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ if (code->opcode == O (O_SHAL, SL))
+ {
+ c = rd & (0x80000000 >> (ea - 1));
+ res = rd >> (31 - ea);
+ v = ((res & 1) && !(res & 2))
+ || (!(res & 1) && (res & 2));
+ rd <<= ea;
+ }
+ else
+ {
+ c = rd & (1 << (ea - 1));
+ v = 0;
+ rd = ((signed int) rd) >> ea;
+ }
+ goto shift32;
+
+ case O (O_ROTL, SB):
+ case O (O_ROTR, SB):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SB))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTL, SB))
+ {
+ c = rd & 0x80;
+ rd <<= 1;
+ if (c)
+ rd |= 1;
+ }
+ else
+ {
+ c = rd & 1;
+ rd = ((unsigned char) rd) >> 1;
+ if (c)
+ rd |= 0x80;
+ }
+
+ v = 0;
+ goto shift8;
+
+ case O (O_ROTL, SW):
+ case O (O_ROTR, SW):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SW))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTL, SW))
+ {
+ c = rd & 0x8000;
+ rd <<= 1;
+ if (c)
+ rd |= 1;
+ }
+ else
+ {
+ c = rd & 1;
+ rd = ((unsigned short) rd) >> 1;
+ if (c)
+ rd |= 0x8000;
+ }
+
+ v = 0;
+ goto shift16;
+
+ case O (O_ROTL, SL):
+ case O (O_ROTR, SL):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SL))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTL, SL))
+ {
+ c = rd & 0x80000000;
+ rd <<= 1;
+ if (c)
+ rd |= 1;
+ }
+ else
+ {
+ c = rd & 1;
+ rd = ((unsigned int) rd) >> 1;
+ if (c)
+ rd |= 0x80000000;
+ }
+
+ v = 0;
+ goto shift32;
+
+ case O (O_ROTXL, SB):
+ case O (O_ROTXR, SB):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SB))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTXL, SB))
+ {
+ res = rd & 0x80;
+ rd <<= 1;
+ if (C)
+ rd |= 1;
+ c = res;
+ }
+ else
+ {
+ res = rd & 1;
+ rd = ((unsigned char) rd) >> 1;
+ if (C)
+ rd |= 0x80;
+ c = res;
+ }
+
+ v = 0;
+ goto shift8;
+
+ case O (O_ROTXL, SW):
+ case O (O_ROTXR, SW):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SW))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTXL, SW))
+ {
+ res = rd & 0x8000;
+ rd <<= 1;
+ if (C)
+ rd |= 1;
+ c = res;
+ }
+ else
+ {
+ res = rd & 1;
+ rd = ((unsigned short) rd) >> 1;
+ if (C)
+ rd |= 0x8000;
+ c = res;
+ }
+
+ v = 0;
+ goto shift16;
+
+ case O (O_ROTXL, SL):
+ case O (O_ROTXR, SL):
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+
+ if (code->src.type == X (OP_IMM, SL))
+ fetch (sd, &code->src, &ea);
+ else
+ ea = 1;
+
+ while (ea--)
+ if (code->opcode == O (O_ROTXL, SL))
+ {
+ res = rd & 0x80000000;
+ rd <<= 1;
+ if (C)
+ rd |= 1;
+ c = res;
+ }
+ else
+ {
+ res = rd & 1;
+ rd = ((unsigned int) rd) >> 1;
+ if (C)
+ rd |= 0x80000000;
+ c = res;
+ }
+
+ v = 0;
+ goto shift32;
+
+ case O (O_JMP, SN):
+ case O (O_JMP, SL):
+ case O (O_JMP, SB): /* jmp */
+ case O (O_JMP, SW):
+ fetch (sd, &code->src, &pc);
+ goto end;
+
+ case O (O_JSR, SN):
+ case O (O_JSR, SL):
+ case O (O_JSR, SB): /* jsr, jump to subroutine */
+ case O (O_JSR, SW):
+ if (fetch (sd, &code->src, &pc))
+ goto end;
+ call:
+ tmp = h8_get_reg (sd, SP_REGNUM);
+
+ if (h8300hmode && !h8300_normal_mode)
+ {
+ tmp -= 4;
+ SET_MEMORY_L (tmp, code->next_pc);
+ }
+ else
+ {
+ tmp -= 2;
+ SET_MEMORY_W (tmp, code->next_pc);
+ }
+ h8_set_reg (sd, SP_REGNUM, tmp);
+
+ goto end;
+
+ case O (O_BSR, SW):
+ case O (O_BSR, SL):
+ case O (O_BSR, SB): /* bsr, branch to subroutine */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ pc = code->next_pc + res;
+ goto call;
+
+ case O (O_RTE, SN): /* rte, return from exception */
+ rte:
+ /* Pops exr and ccr before pc -- otherwise identical to rts. */
+ tmp = h8_get_reg (sd, SP_REGNUM);
+
+ if (h8300smode) /* pop exr */
+ {
+ h8_set_exr (sd, GET_MEMORY_L (tmp));
+ tmp += 4;
+ }
+ if (h8300hmode && !h8300_normal_mode)
+ {
+ h8_set_ccr (sd, GET_MEMORY_L (tmp));
+ tmp += 4;
+ pc = GET_MEMORY_L (tmp);
+ tmp += 4;
+ }
+ else
+ {
+ h8_set_ccr (sd, GET_MEMORY_W (tmp));
+ tmp += 2;
+ pc = GET_MEMORY_W (tmp);
+ tmp += 2;
+ }
+
+ GETSR (sd);
+ h8_set_reg (sd, SP_REGNUM, tmp);
+ goto end;
+
+ case O (O_RTS, SN): /* rts, return from subroutine */
+ rts:
+ tmp = h8_get_reg (sd, SP_REGNUM);
+
+ if (h8300hmode && !h8300_normal_mode)
+ {
+ pc = GET_MEMORY_L (tmp);
+ tmp += 4;
+ }
+ else
+ {
+ pc = GET_MEMORY_W (tmp);
+ tmp += 2;
+ }
+
+ h8_set_reg (sd, SP_REGNUM, tmp);
+ goto end;
+
+ case O (O_ILL, SB): /* illegal */
+ sim_engine_set_run_state (sd, sim_stopped, SIGILL);
+ goto end;
+
+ case O (O_SLEEP, SN): /* sleep */
+ /* Check for magic numbers in r1 and r2. */
+ if ((h8_get_reg (sd, R1_REGNUM) & 0xffff) == LIBC_EXIT_MAGIC1 &&
+ (h8_get_reg (sd, R2_REGNUM) & 0xffff) == LIBC_EXIT_MAGIC2 &&
+ SIM_WIFEXITED (h8_get_reg (sd, 0)))
+ {
+ /* This trap comes from _exit, not from gdb. */
+ sim_engine_set_run_state (sd, sim_exited,
+ SIM_WEXITSTATUS (h8_get_reg (sd, 0)));
+ }
+#if 0
+ /* Unfortunately this won't really work, because
+ when we take a breakpoint trap, R0 has a "random",
+ user-defined value. Don't see any immediate solution. */
+ else if (SIM_WIFSTOPPED (h8_get_reg (sd, 0)))
+ {
+ /* Pass the stop signal up to gdb. */
+ sim_engine_set_run_state (sd, sim_stopped,
+ SIM_WSTOPSIG (h8_get_reg (sd, 0)));
+ }
+#endif
+ else
+ {
+ /* Treat it as a sigtrap. */
+ sim_engine_set_run_state (sd, sim_stopped, SIGTRAP);
+ }
+ goto end;
+
+ case O (O_TRAPA, SB): /* trapa */
+ if (fetch (sd, &code->src, &res))
+ goto end; /* res is vector number. */
+
+ tmp = h8_get_reg (sd, SP_REGNUM);
+ if(h8300_normal_mode)
+ {
+ tmp -= 2;
+ SET_MEMORY_W (tmp, code->next_pc);
+ tmp -= 2;
+ SET_MEMORY_W (tmp, h8_get_ccr (sd));
+ }
+ else
+ {
+ tmp -= 4;
+ SET_MEMORY_L (tmp, code->next_pc);
+ tmp -= 4;
+ SET_MEMORY_L (tmp, h8_get_ccr (sd));
+ }
+ intMaskBit = 1;
+ BUILDSR (sd);
+
+ if (h8300smode)
+ {
+ tmp -= 4;
+ SET_MEMORY_L (tmp, h8_get_exr (sd));
+ }
+
+ h8_set_reg (sd, SP_REGNUM, tmp);
+
+ if(h8300_normal_mode)
+ pc = GET_MEMORY_L (0x10 + res * 2); /* Vector addresses are 0x10,0x12,0x14 and 0x16 */
+ else
+ pc = GET_MEMORY_L (0x20 + res * 4);
+ goto end;
+
+ case O (O_BPT, SN):
+ sim_engine_set_run_state (sd, sim_stopped, SIGTRAP);
+ goto end;
+
+ case O (O_BSETEQ, SB):
+ if (Z)
+ goto bset;
+ goto next;
+
+ case O (O_BSETNE, SB):
+ if (!Z)
+ goto bset;
+ goto next;
+
+ case O (O_BCLREQ, SB):
+ if (Z)
+ goto bclr;
+ goto next;
+
+ case O (O_BCLRNE, SB):
+ if (!Z)
+ goto bclr;
+ goto next;
+
+ OBITOP (O_BNOT, 1, 1, ea ^= m); /* bnot */
+ OBITOP (O_BTST, 1, 0, nz = ea & m); /* btst */
+ bset:
+ OBITOP (O_BSET, 1, 1, ea |= m); /* bset */
+ bclr:
+ OBITOP (O_BCLR, 1, 1, ea &= ~m); /* bclr */
+ OBITOP (O_BLD, 1, 0, c = ea & m); /* bld */
+ OBITOP (O_BILD, 1, 0, c = !(ea & m)); /* bild */
+ OBITOP (O_BST, 1, 1, ea &= ~m;
+ if (C) ea |= m); /* bst */
+ OBITOP (O_BIST, 1, 1, ea &= ~m;
+ if (!C) ea |= m); /* bist */
+ OBITOP (O_BSTZ, 1, 1, ea &= ~m;
+ if (Z) ea |= m); /* bstz */
+ OBITOP (O_BISTZ, 1, 1, ea &= ~m;
+ if (!Z) ea |= m); /* bistz */
+ OBITOP (O_BAND, 1, 0, c = (ea & m) && C); /* band */
+ OBITOP (O_BIAND, 1, 0, c = !(ea & m) && C); /* biand */
+ OBITOP (O_BOR, 1, 0, c = (ea & m) || C); /* bor */
+ OBITOP (O_BIOR, 1, 0, c = !(ea & m) || C); /* bior */
+ OBITOP (O_BXOR, 1, 0, c = ((ea & m) != 0)!= C); /* bxor */
+ OBITOP (O_BIXOR, 1, 0, c = !(ea & m) != C); /* bixor */
+
+ case O (O_BFLD, SB): /* bfld */
+ /* bitfield load */
+ ea = 0;
+ if (fetch (sd, &code->src, &bit))
+ goto end;
+
+ if (bit != 0)
+ {
+ if (fetch (sd, &code->dst, &ea))
+ goto end;
+
+ ea &= bit;
+ while (!(bit & 1))
+ {
+ ea >>= 1;
+ bit >>= 1;
+ }
+ }
+ if (store (sd, &code->op3, ea))
+ goto end;
+
+ goto next;
+
+ case O(O_BFST, SB): /* bfst */
+ /* bitfield store */
+ /* NOTE: the imm8 value is in dst, and the ea value
+ (which is actually the destination) is in op3.
+ It has to be that way, to avoid breaking the assembler. */
+
+ if (fetch (sd, &code->dst, &bit)) /* imm8 */
+ goto end;
+ if (bit == 0) /* noop -- nothing to do. */
+ goto next;
+
+ if (fetch (sd, &code->src, &rd)) /* reg8 src */
+ goto end;
+
+ if (fetch2 (sd, &code->op3, &ea)) /* ea dst */
+ goto end;
+
+ /* Left-shift the register data into position. */
+ for (tmp = bit; !(tmp & 1); tmp >>= 1)
+ rd <<= 1;
+
+ /* Combine it with the neighboring bits. */
+ ea = (ea & ~bit) | (rd & bit);
+
+ /* Put it back. */
+ if (store2 (sd, &code->op3, ea))
+ goto end;
+ goto next;
+
+ case O (O_CLRMAC, SN): /* clrmac */
+ h8_set_mach (sd, 0);
+ h8_set_macl (sd, 0);
+ h8_set_macZ (sd, 1);
+ h8_set_macV (sd, 0);
+ h8_set_macN (sd, 0);
+ goto next;
+
+ case O (O_STMAC, SL): /* stmac, 260 */
+ switch (code->src.type) {
+ case X (OP_MACH, SL):
+ res = h8_get_mach (sd);
+ if (res & 0x200) /* sign extend */
+ res |= 0xfffffc00;
+ break;
+ case X (OP_MACL, SL):
+ res = h8_get_macl (sd);
+ break;
+ default: goto illegal;
+ }
+ nz = !h8_get_macZ (sd);
+ n = h8_get_macN (sd);
+ v = h8_get_macV (sd);
+
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_LDMAC, SL): /* ldmac, 179 */
+ if (fetch (sd, &code->src, &rd))
+ goto end;
+
+ switch (code->dst.type) {
+ case X (OP_MACH, SL):
+ rd &= 0x3ff; /* Truncate to 10 bits */
+ h8_set_mach (sd, rd);
+ break;
+ case X (OP_MACL, SL):
+ h8_set_macl (sd, rd);
+ break;
+ default: goto illegal;
+ }
+ h8_set_macV (sd, 0);
+ goto next;
+
+ case O (O_MAC, SW):
+ if (fetch (sd, &code->src, &rd) ||
+ fetch (sd, &code->dst, &res))
+ goto end;
+
+ /* Ye gods, this is non-portable!
+ However, the existing mul/div code is similar. */
+ res = SEXTSHORT (res) * SEXTSHORT (rd);
+
+ if (h8_get_macS (sd)) /* Saturating mode */
+ {
+ long long mac = h8_get_macl (sd);
+
+ if (mac & 0x80000000) /* sign extend */
+ mac |= 0xffffffff00000000LL;
+
+ mac += res;
+ if (mac > 0x7fffffff || mac < 0xffffffff80000000LL)
+ h8_set_macV (sd, 1);
+ h8_set_macZ (sd, (mac == 0));
+ h8_set_macN (sd, (mac < 0));
+ h8_set_macl (sd, (int) mac);
+ }
+ else /* "Less Saturating" mode */
+ {
+ long long mac = h8_get_mach (sd);
+ mac <<= 32;
+ mac += h8_get_macl (sd);
+
+ if (mac & 0x20000000000LL) /* sign extend */
+ mac |= 0xfffffc0000000000LL;
+
+ mac += res;
+ if (mac > 0x1ffffffffffLL ||
+ mac < (long long) 0xfffffe0000000000LL)
+ h8_set_macV (sd, 1);
+ h8_set_macZ (sd, (mac == 0));
+ h8_set_macN (sd, (mac < 0));
+ h8_set_macl (sd, (int) mac);
+ mac >>= 32;
+ h8_set_mach (sd, (int) (mac & 0x3ff));
+ }
+ goto next;
+
+ case O (O_MULS, SW): /* muls.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ ea = SEXTSHORT (ea);
+ res = SEXTSHORT (ea * SEXTSHORT (rd));
+
+ n = res & 0x8000;
+ nz = res & 0xffff;
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULS, SL): /* muls.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ res = ea * rd;
+
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_MULSU, SL): /* muls/u.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ /* Compute upper 32 bits of the 64-bit result. */
+ res = (((long long) ea) * ((long long) rd)) >> 32;
+
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_MULU, SW): /* mulu.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ res = UEXTSHORT ((UEXTSHORT (ea) * UEXTSHORT (rd)));
+
+ /* Don't set Z or N. */
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULU, SL): /* mulu.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ res = ea * rd;
+
+ /* Don't set Z or N. */
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULUU, SL): /* mulu/u.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ /* Compute upper 32 bits of the 64-bit result. */
+ res = (((unsigned long long) (unsigned) ea) *
+ ((unsigned long long) (unsigned) rd)) >> 32;
+
+ /* Don't set Z or N. */
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULXS, SB): /* mulxs.b */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ ea = SEXTCHAR (ea);
+ res = ea * SEXTCHAR (rd);
+
+ n = res & 0x8000;
+ nz = res & 0xffff;
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULXS, SW): /* mulxs.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ ea = SEXTSHORT (ea);
+ res = ea * SEXTSHORT (rd & 0xffff);
+
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULXU, SB): /* mulxu.b */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ res = UEXTCHAR (ea) * UEXTCHAR (rd);
+
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_MULXU, SW): /* mulxu.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ res = UEXTSHORT (ea) * UEXTSHORT (rd);
+
+ if (store (sd, &code->dst, res))
+ goto end;
+
+ goto next;
+
+ case O (O_TAS, SB): /* tas (test and set) */
+ if (!h8300sxmode) /* h8sx can use any register. */
+ switch (code->src.reg)
+ {
+ case R0_REGNUM:
+ case R1_REGNUM:
+ case R4_REGNUM:
+ case R5_REGNUM:
+ break;
+ default:
+ goto illegal;
+ }
+
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ if (store (sd, &code->src, res | 0x80))
+ goto end;
+
+ goto just_flags_log8;
+
+ case O (O_DIVU, SW): /* divu.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ n = ea & 0x8000;
+ nz = ea & 0xffff;
+ if (ea)
+ res = (unsigned) (UEXTSHORT (rd) / UEXTSHORT (ea));
+ else
+ res = 0;
+
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_DIVU, SL): /* divu.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ n = ea & 0x80000000;
+ nz = ea & 0xffffffff;
+ if (ea)
+ res = (unsigned) rd / ea;
+ else
+ res = 0;
+
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_DIVS, SW): /* divs.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ if (ea)
+ {
+ res = SEXTSHORT (rd) / SEXTSHORT (ea);
+ nz = 1;
+ }
+ else
+ {
+ res = 0;
+ nz = 0;
+ }
+
+ n = res & 0x8000;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_DIVS, SL): /* divs.l */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ if (ea)
+ {
+ res = rd / ea;
+ nz = 1;
+ }
+ else
+ {
+ res = 0;
+ nz = 0;
+ }
+
+ n = res & 0x80000000;
+ if (store (sd, &code->dst, res))
+ goto end;
+ goto next;
+
+ case O (O_DIVXU, SB): /* divxu.b */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ rd = UEXTSHORT (rd);
+ ea = UEXTCHAR (ea);
+
+ n = ea & 0x80;
+ nz = ea & 0xff;
+ if (ea)
+ {
+ tmp = (unsigned) rd % ea;
+ res = (unsigned) rd / ea;
+ }
+ else
+ {
+ tmp = 0;
+ res = 0;
+ }
+
+ if (store (sd, &code->dst, (res & 0xff) | (tmp << 8)))
+ goto end;
+ goto next;
+
+ case O (O_DIVXU, SW): /* divxu.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ ea = UEXTSHORT (ea);
+
+ n = ea & 0x8000;
+ nz = ea & 0xffff;
+ if (ea)
+ {
+ tmp = (unsigned) rd % ea;
+ res = (unsigned) rd / ea;
+ }
+ else
+ {
+ tmp = 0;
+ res = 0;
+ }
+
+ if (store (sd, &code->dst, (res & 0xffff) | (tmp << 16)))
+ goto end;
+ goto next;
+
+ case O (O_DIVXS, SB): /* divxs.b */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ rd = SEXTSHORT (rd);
+ ea = SEXTCHAR (ea);
+
+ if (ea)
+ {
+ tmp = (int) rd % (int) ea;
+ res = (int) rd / (int) ea;
+ nz = 1;
+ }
+ else
+ {
+ tmp = 0;
+ res = 0;
+ nz = 0;
+ }
+
+ n = res & 0x8000;
+ if (store (sd, &code->dst, (res & 0xff) | (tmp << 8)))
+ goto end;
+ goto next;
+
+ case O (O_DIVXS, SW): /* divxs.w */
+ if (fetch (sd, &code->src, &ea) ||
+ fetch (sd, &code->dst, &rd))
+ goto end;
+
+ ea = SEXTSHORT (ea);
+
+ if (ea)
+ {
+ tmp = (int) rd % (int) ea;
+ res = (int) rd / (int) ea;
+ nz = 1;
+ }
+ else
+ {
+ tmp = 0;
+ res = 0;
+ nz = 0;
+ }
+
+ n = res & 0x80000000;
+ if (store (sd, &code->dst, (res & 0xffff) | (tmp << 16)))
+ goto end;
+ goto next;
+
+ case O (O_EXTS, SW): /* exts.w, signed extend */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ ea = rd & 0x80 ? -256 : 0;
+ res = (rd & 0xff) + ea;
+ goto log16;
+
+ case O (O_EXTS, SL): /* exts.l, signed extend */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (code->src.type == X (OP_IMM, SL))
+ {
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+
+ if (ea == 2) /* exts.l #2, nn */
+ {
+ /* Sign-extend from 8-bit to 32-bit. */
+ ea = rd & 0x80 ? -256 : 0;
+ res = (rd & 0xff) + ea;
+ goto log32;
+ }
+ }
+ /* Sign-extend from 16-bit to 32-bit. */
+ ea = rd & 0x8000 ? -65536 : 0;
+ res = (rd & 0xffff) + ea;
+ goto log32;
+
+ case O (O_EXTU, SW): /* extu.w, unsigned extend */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ ea = 0;
+ res = (rd & 0xff) + ea;
+ goto log16;
+
+ case O (O_EXTU, SL): /* extu.l, unsigned extend */
+ if (fetch2 (sd, &code->dst, &rd))
+ goto end;
+ if (code->src.type == X (OP_IMM, SL))
+ {
+ if (fetch (sd, &code->src, &ea))
+ goto end;
+
+ if (ea == 2) /* extu.l #2, nn */
+ {
+ /* Zero-extend from 8-bit to 32-bit. */
+ ea = 0;
+ res = (rd & 0xff) + ea;
+ goto log32;
+ }
+ }
+ /* Zero-extend from 16-bit to 32-bit. */
+ ea = 0;
+ res = (rd & 0xffff) + ea;
+ goto log32;
+
+ case O (O_NOP, SN): /* nop */
+ goto next;
+
+ case O (O_STM, SL): /* stm, store to memory */
+ {
+ int nregs, firstreg, i;
+
+ nregs = GET_MEMORY_B (pc + 1);
+ nregs >>= 4;
+ nregs &= 0xf;
+ firstreg = code->src.reg;
+ firstreg &= 0xf;
+ for (i = firstreg; i <= firstreg + nregs; i++)
+ {
+ h8_set_reg (sd, SP_REGNUM, h8_get_reg (sd, SP_REGNUM) - 4);
+ SET_MEMORY_L (h8_get_reg (sd, SP_REGNUM), h8_get_reg (sd, i));
+ }
+ }
+ goto next;
+
+ case O (O_LDM, SL): /* ldm, load from memory */
+ case O (O_RTEL, SN): /* rte/l, ldm plus rte */
+ case O (O_RTSL, SN): /* rts/l, ldm plus rts */
+ {
+ int nregs, firstreg, i;
+
+ nregs = ((GET_MEMORY_B (pc + 1) >> 4) & 0xf);
+ firstreg = code->dst.reg & 0xf;
+ for (i = firstreg; i >= firstreg - nregs; i--)
+ {
+ h8_set_reg (sd, i, GET_MEMORY_L (h8_get_reg (sd, SP_REGNUM)));
+ h8_set_reg (sd, SP_REGNUM, h8_get_reg (sd, SP_REGNUM) + 4);
+ }
+ }
+ switch (code->opcode) {
+ case O (O_RTEL, SN):
+ goto rte;
+ case O (O_RTSL, SN):
+ goto rts;
+ case O (O_LDM, SL):
+ goto next;
+ default:
+ goto illegal;
+ }
+
+ case O (O_DAA, SB):
+ /* Decimal Adjust Addition. This is for BCD arithmetic. */
+ res = GET_B_REG (code->src.reg); /* FIXME fetch? */
+ if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
+ !h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
+ res = res; /* Value added == 0. */
+ else if (!c && (0 <= (res >> 4) && (res >> 4) <= 8) &&
+ !h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
+ res = res + 0x6; /* Value added == 6. */
+ else if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
+ h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
+ res = res + 0x6; /* Value added == 6. */
+ else if (!c && (10 <= (res >> 4) && (res >> 4) <= 15) &&
+ !h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
+ res = res + 0x60; /* Value added == 60. */
+ else if (!c && (9 <= (res >> 4) && (res >> 4) <= 15) &&
+ !h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
+ res = res + 0x66; /* Value added == 66. */
+ else if (!c && (10 <= (res >> 4) && (res >> 4) <= 15) &&
+ h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
+ res = res + 0x66; /* Value added == 66. */
+ else if ( c && (1 <= (res >> 4) && (res >> 4) <= 2) &&
+ !h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
+ res = res + 0x60; /* Value added == 60. */
+ else if ( c && (1 <= (res >> 4) && (res >> 4) <= 2) &&
+ !h && (10 <= (res & 0xf) && (res & 0xf) <= 15))
+ res = res + 0x66; /* Value added == 66. */
+ else if (c && (1 <= (res >> 4) && (res >> 4) <= 3) &&
+ h && (0 <= (res & 0xf) && (res & 0xf) <= 3))
+ res = res + 0x66; /* Value added == 66. */
+
+ goto alu8;
+
+ case O (O_DAS, SB):
+ /* Decimal Adjust Subtraction. This is for BCD arithmetic. */
+ res = GET_B_REG (code->src.reg); /* FIXME fetch, fetch2... */
+ if (!c && (0 <= (res >> 4) && (res >> 4) <= 9) &&
+ !h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
+ res = res; /* Value added == 0. */
+ else if (!c && (0 <= (res >> 4) && (res >> 4) <= 8) &&
+ h && (6 <= (res & 0xf) && (res & 0xf) <= 15))
+ res = res + 0xfa; /* Value added == 0xfa. */
+ else if ( c && (7 <= (res >> 4) && (res >> 4) <= 15) &&
+ !h && (0 <= (res & 0xf) && (res & 0xf) <= 9))
+ res = res + 0xa0; /* Value added == 0xa0. */
+ else if (c && (6 <= (res >> 4) && (res >> 4) <= 15) &&
+ h && (6 <= (res & 0xf) && (res & 0xf) <= 15))
+ res = res + 0x9a; /* Value added == 0x9a. */
+
+ goto alu8;
+
+ default:
+ illegal:
+ sim_engine_set_run_state (sd, sim_stopped, SIGILL);
+ goto end;
+
+ }
+
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_resume: internal error.\n");
+ sim_engine_set_run_state (sd, sim_stopped, SIGILL);
+ goto end;
+
+ setc:
+ if (code->dst.type == X (OP_CCR, SB) ||
+ code->dst.type == X (OP_CCR, SW))
+ {
+ h8_set_ccr (sd, res);
+ GETSR (sd);
+ }
+ else if (h8300smode &&
+ (code->dst.type == X (OP_EXR, SB) ||
+ code->dst.type == X (OP_EXR, SW)))
+ {
+ h8_set_exr (sd, res);
+ if (h8300smode) /* Get exr. */
+ {
+ trace = (h8_get_exr (sd) >> 7) & 1;
+ intMask = h8_get_exr (sd) & 7;
+ }
+ }
+ else
+ goto illegal;
+
+ goto next;
+
+ condtrue:
+ /* When a branch works */
+ if (fetch (sd, &code->src, &res))
+ goto end;
+ if (res & 1) /* bad address */
+ goto illegal;
+ pc = code->next_pc + res;
+ goto end;
+
+ /* Set the cond codes from res */
+ bitop:
+
+ /* Set the flags after an 8 bit inc/dec operation */
+ just_flags_inc8:
+ n = res & 0x80;
+ nz = res & 0xff;
+ v = (rd & 0x7f) == 0x7f;
+ goto next;
+
+ /* Set the flags after an 16 bit inc/dec operation */
+ just_flags_inc16:
+ n = res & 0x8000;
+ nz = res & 0xffff;
+ v = (rd & 0x7fff) == 0x7fff;
+ goto next;
+
+ /* Set the flags after an 32 bit inc/dec operation */
+ just_flags_inc32:
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ v = (rd & 0x7fffffff) == 0x7fffffff;
+ goto next;
+
+ shift8:
+ /* Set flags after an 8 bit shift op, carry,overflow set in insn */
+ n = (rd & 0x80);
+ nz = rd & 0xff;
+ if (store2 (sd, &code->dst, rd))
+ goto end;
+ goto next;
+
+ shift16:
+ /* Set flags after an 16 bit shift op, carry,overflow set in insn */
+ n = (rd & 0x8000);
+ nz = rd & 0xffff;
+ if (store2 (sd, &code->dst, rd))
+ goto end;
+ goto next;
+
+ shift32:
+ /* Set flags after an 32 bit shift op, carry,overflow set in insn */
+ n = (rd & 0x80000000);
+ nz = rd & 0xffffffff;
+ if (store2 (sd, &code->dst, rd))
+ goto end;
+ goto next;
+
+ log32:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_log32:
+ /* flags after a 32bit logical operation */
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ v = 0;
+ goto next;
+
+ log16:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_log16:
+ /* flags after a 16bit logical operation */
+ n = res & 0x8000;
+ nz = res & 0xffff;
+ v = 0;
+ goto next;
+
+ log8:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_log8:
+ n = res & 0x80;
+ nz = res & 0xff;
+ v = 0;
+ goto next;
+
+ alu8:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_alu8:
+ n = res & 0x80;
+ nz = res & 0xff;
+ c = (res & 0x100);
+ switch (code->opcode / 4)
+ {
+ case O_ADD:
+ case O_ADDX:
+ v = ((rd & 0x80) == (ea & 0x80)
+ && (rd & 0x80) != (res & 0x80));
+ break;
+ case O_SUB:
+ case O_SUBX:
+ case O_CMP:
+ v = ((rd & 0x80) != (-ea & 0x80)
+ && (rd & 0x80) != (res & 0x80));
+ break;
+ case O_NEG:
+ v = (rd == 0x80);
+ break;
+ case O_DAA:
+ case O_DAS:
+ break; /* No effect on v flag. */
+ }
+ goto next;
+
+ alu16:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_alu16:
+ n = res & 0x8000;
+ nz = res & 0xffff;
+ c = (res & 0x10000);
+ switch (code->opcode / 4)
+ {
+ case O_ADD:
+ case O_ADDX:
+ v = ((rd & 0x8000) == (ea & 0x8000)
+ && (rd & 0x8000) != (res & 0x8000));
+ break;
+ case O_SUB:
+ case O_SUBX:
+ case O_CMP:
+ v = ((rd & 0x8000) != (-ea & 0x8000)
+ && (rd & 0x8000) != (res & 0x8000));
+ break;
+ case O_NEG:
+ v = (rd == 0x8000);
+ break;
+ }
+ goto next;
+
+ alu32:
+ if (store2 (sd, &code->dst, res))
+ goto end;
+
+ just_flags_alu32:
+ n = res & 0x80000000;
+ nz = res & 0xffffffff;
+ switch (code->opcode / 4)
+ {
+ case O_ADD:
+ case O_ADDX:
+ v = ((rd & 0x80000000) == (ea & 0x80000000)
+ && (rd & 0x80000000) != (res & 0x80000000));
+ c = ((unsigned) res < (unsigned) rd) ||
+ ((unsigned) res < (unsigned) ea);
+ break;
+ case O_SUB:
+ case O_SUBX:
+ case O_CMP:
+ v = ((rd & 0x80000000) != (-ea & 0x80000000)
+ && (rd & 0x80000000) != (res & 0x80000000));
+ c = (unsigned) rd < (unsigned) -ea;
+ break;
+ case O_NEG:
+ v = (rd == 0x80000000);
+ c = res != 0;
+ break;
+ }
+ goto next;
+
+ next:
+ if ((res = h8_get_delayed_branch (sd)) != 0)
+ {
+ pc = res;
+ h8_set_delayed_branch (sd, 0);
+ }
+ else
+ pc = code->next_pc;
+
+ end:
+
+ if (--poll_count < 0)
+ {
+ poll_count = POLL_QUIT_INTERVAL;
+ if ((*sim_callback->poll_quit) != NULL
+ && (*sim_callback->poll_quit) (sim_callback))
+ sim_engine_set_run_state (sd, sim_stopped, SIGINT);
+ }
+ sim_engine_get_run_state (sd, &reason, &sigrc);
+ } while (reason == sim_running);
+
+ h8_set_ticks (sd, h8_get_ticks (sd) + get_now () - tick_start);
+ h8_set_cycles (sd, h8_get_cycles (sd) + cycles);
+ h8_set_insts (sd, h8_get_insts (sd) + insts);
+ h8_set_pc (sd, pc);
+ BUILDSR (sd);
+
+ if (h8300smode)
+ h8_set_exr (sd, (trace<<7) | intMask);
+
+ h8_set_mask (sd, oldmask);
+ signal (SIGINT, prev);
+}
+
+int
+sim_trace (SIM_DESC sd)
+{
+ /* FIXME: Unfinished. */
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_trace: trace not supported.\n");
+ return 1; /* Done. */
+}
+
+int
+sim_write (SIM_DESC sd, SIM_ADDR addr, unsigned char *buffer, int size)
+{
+ int i;
+
+ init_pointers (sd);
+ if (addr < 0)
+ return 0;
+ for (i = 0; i < size; i++)
+ {
+ if (addr < memory_size)
+ {
+ h8_set_memory (sd, addr + i, buffer[i]);
+ h8_set_cache_idx (sd, addr + i, 0);
+ }
+ else
+ {
+ h8_set_eightbit (sd, (addr + i) & 0xff, buffer[i]);
+ }
+ }
+ return size;
+}
+
+int
+sim_read (SIM_DESC sd, SIM_ADDR addr, unsigned char *buffer, int size)
+{
+ init_pointers (sd);
+ if (addr < 0)
+ return 0;
+ if (addr < memory_size)
+ memcpy (buffer, h8_get_memory_buf (sd) + addr, size);
+ else
+ memcpy (buffer, h8_get_eightbit_buf (sd) + (addr & 0xff), size);
+ return size;
+}
+
+
+int
+sim_store_register (SIM_DESC sd, int rn, unsigned char *value, int length)
+{
+ int longval;
+ int shortval;
+ int intval;
+ longval = (value[0] << 24) | (value[1] << 16) | (value[2] << 8) | value[3];
+ shortval = (value[0] << 8) | (value[1]);
+ intval = h8300hmode ? longval : shortval;
+
+ init_pointers (sd);
+ switch (rn)
+ {
+ case PC_REGNUM:
+ if(h8300_normal_mode)
+ h8_set_pc (sd, shortval); /* PC for Normal mode is 2 bytes */
+ else
+ h8_set_pc (sd, intval);
+ break;
+ default:
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_store_register: bad regnum %d.\n",
+ rn);
+ case R0_REGNUM:
+ case R1_REGNUM:
+ case R2_REGNUM:
+ case R3_REGNUM:
+ case R4_REGNUM:
+ case R5_REGNUM:
+ case R6_REGNUM:
+ case R7_REGNUM:
+ h8_set_reg (sd, rn, intval);
+ break;
+ case CCR_REGNUM:
+ h8_set_ccr (sd, intval);
+ break;
+ case EXR_REGNUM:
+ h8_set_exr (sd, intval);
+ break;
+ case SBR_REGNUM:
+ h8_set_sbr (sd, intval);
+ break;
+ case VBR_REGNUM:
+ h8_set_vbr (sd, intval);
+ break;
+ case MACH_REGNUM:
+ h8_set_mach (sd, intval);
+ break;
+ case MACL_REGNUM:
+ h8_set_macl (sd, intval);
+ break;
+ case CYCLE_REGNUM:
+ h8_set_cycles (sd, longval);
+ break;
+
+ case INST_REGNUM:
+ h8_set_insts (sd, longval);
+ break;
+
+ case TICK_REGNUM:
+ h8_set_ticks (sd, longval);
+ break;
+ }
+ return -1;
+}
+
+int
+sim_fetch_register (SIM_DESC sd, int rn, unsigned char *buf, int length)
+{
+ int v;
+ int longreg = 0;
+
+ init_pointers (sd);
+
+ if (!h8300smode && rn >= EXR_REGNUM)
+ rn++;
+ switch (rn)
+ {
+ default:
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_fetch_register: bad regnum %d.\n",
+ rn);
+ v = 0;
+ break;
+ case CCR_REGNUM:
+ v = h8_get_ccr (sd);
+ break;
+ case EXR_REGNUM:
+ v = h8_get_exr (sd);
+ break;
+ case PC_REGNUM:
+ v = h8_get_pc (sd);
+ break;
+ case SBR_REGNUM:
+ v = h8_get_sbr (sd);
+ break;
+ case VBR_REGNUM:
+ v = h8_get_vbr (sd);
+ break;
+ case MACH_REGNUM:
+ v = h8_get_mach (sd);
+ break;
+ case MACL_REGNUM:
+ v = h8_get_macl (sd);
+ break;
+ case R0_REGNUM:
+ case R1_REGNUM:
+ case R2_REGNUM:
+ case R3_REGNUM:
+ case R4_REGNUM:
+ case R5_REGNUM:
+ case R6_REGNUM:
+ case R7_REGNUM:
+ v = h8_get_reg (sd, rn);
+ break;
+ case CYCLE_REGNUM:
+ v = h8_get_cycles (sd);
+ longreg = 1;
+ break;
+ case TICK_REGNUM:
+ v = h8_get_ticks (sd);
+ longreg = 1;
+ break;
+ case INST_REGNUM:
+ v = h8_get_insts (sd);
+ longreg = 1;
+ break;
+ }
+ /* In Normal mode PC is 2 byte, but other registers are 4 byte */
+ if ((h8300hmode || longreg) && !(rn == PC_REGNUM && h8300_normal_mode))
+ {
+ buf[0] = v >> 24;
+ buf[1] = v >> 16;
+ buf[2] = v >> 8;
+ buf[3] = v >> 0;
+ }
+ else
+ {
+ buf[0] = v >> 8;
+ buf[1] = v;
+ }
+ return -1;
+}
+
+void
+sim_stop_reason (SIM_DESC sd, enum sim_stop *reason, int *sigrc)
+{
+ sim_engine_get_run_state (sd, reason, sigrc);
+}
+
+/* FIXME: Rename to sim_set_mem_size. */
+
+void
+sim_size (int n)
+{
+ /* Memory size is fixed. */
+}
+
+static void
+set_simcache_size (SIM_DESC sd, int n)
+{
+ if (sd->sim_cache)
+ free (sd->sim_cache);
+ if (n < 2)
+ n = 2;
+ sd->sim_cache = (decoded_inst *) malloc (sizeof (decoded_inst) * n);
+ memset (sd->sim_cache, 0, sizeof (decoded_inst) * n);
+ sd->sim_cache_size = n;
+}
+
+
+void
+sim_info (SIM_DESC sd, int verbose)
+{
+ double timetaken = (double) h8_get_ticks (sd) / (double) now_persec ();
+ double virttime = h8_get_cycles (sd) / 10.0e6;
+
+ (*sim_callback->printf_filtered) (sim_callback,
+ "\n\n#instructions executed %10d\n",
+ h8_get_insts (sd));
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#cycles (v approximate) %10d\n",
+ h8_get_cycles (sd));
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#real time taken %10.4f\n",
+ timetaken);
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#virtual time taken %10.4f\n",
+ virttime);
+ if (timetaken != 0.0)
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#simulation ratio %10.4f\n",
+ virttime / timetaken);
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#compiles %10d\n",
+ h8_get_compiles (sd));
+ (*sim_callback->printf_filtered) (sim_callback,
+ "#cache size %10d\n",
+ sd->sim_cache_size);
+
+#ifdef ADEBUG
+ /* This to be conditional on `what' (aka `verbose'),
+ however it was never passed as non-zero. */
+ if (1)
+ {
+ int i;
+ for (i = 0; i < O_LAST; i++)
+ {
+ if (h8_get_stats (sd, i))
+ (*sim_callback->printf_filtered) (sim_callback, "%d: %d\n",
+ i, h8_get_stats (sd, i));
+ }
+ }
+#endif
+}
+
+/* Indicate whether the cpu is an H8/300 or H8/300H.
+ FLAG is non-zero for the H8/300H. */
+
+void
+set_h8300h (unsigned long machine)
+{
+ /* FIXME: Much of the code in sim_load can be moved to sim_open.
+ This function being replaced by a sim_open:ARGV configuration
+ option. */
+
+ h8300hmode = h8300smode = h8300sxmode = h8300_normal_mode = 0;
+
+ if (machine == bfd_mach_h8300sx || machine == bfd_mach_h8300sxn)
+ h8300sxmode = 1;
+
+ if (machine == bfd_mach_h8300s || machine == bfd_mach_h8300sn || h8300sxmode)
+ h8300smode = 1;
+
+ if (machine == bfd_mach_h8300h || machine == bfd_mach_h8300hn || h8300smode)
+ h8300hmode = 1;
+
+ if(machine == bfd_mach_h8300hn || machine == bfd_mach_h8300sn || machine == bfd_mach_h8300sxn)
+ h8300_normal_mode = 1;
+}
+
+/* Cover function of sim_state_free to free the cpu buffers as well. */
+
+static void
+free_state (SIM_DESC sd)
+{
+ if (STATE_MODULES (sd) != NULL)
+ sim_module_uninstall (sd);
+
+ /* Fixme: free buffers in _sim_cpu. */
+ sim_state_free (sd);
+}
+
+SIM_DESC
+sim_open (SIM_OPEN_KIND kind,
+ struct host_callback_struct *callback,
+ struct bfd *abfd,
+ char **argv)
+{
+ SIM_DESC sd;
+ sim_cpu *cpu;
+
+ sd = sim_state_alloc (kind, callback);
+ sd->cpu = sim_cpu_alloc (sd, 0);
+ cpu = STATE_CPU (sd, 0);
+ SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+ sim_state_initialize (sd, cpu);
+ /* sim_cpu object is new, so some initialization is needed. */
+ init_pointers_needed = 1;
+
+ /* For compatibility (FIXME: is this right?). */
+ current_alignment = NONSTRICT_ALIGNMENT;
+ current_target_byte_order = BIG_ENDIAN;
+
+ if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+ {
+ free_state (sd);
+ return 0;
+ }
+
+ /* getopt will print the error message so we just have to exit if
+ this fails. FIXME: Hmmm... in the case of gdb we need getopt
+ to call print_filtered. */
+ if (sim_parse_args (sd, argv) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ free_state (sd);
+ return 0;
+ }
+
+ /* Check for/establish the a reference program image. */
+ if (sim_analyze_program (sd,
+ (STATE_PROG_ARGV (sd) != NULL
+ ? *STATE_PROG_ARGV (sd)
+ : NULL), abfd) != SIM_RC_OK)
+ {
+ free_state (sd);
+ return 0;
+ }
+
+ /* Establish any remaining configuration options. */
+ if (sim_config (sd) != SIM_RC_OK)
+ {
+ free_state (sd);
+ return 0;
+ }
+
+ if (sim_post_argv_init (sd) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ free_state (sd);
+ return 0;
+ }
+
+ /* sim_hw_configure (sd); */
+
+ /* FIXME: Much of the code in sim_load can be moved here. */
+
+ sim_kind = kind;
+ myname = argv[0];
+ sim_callback = callback;
+ return sd;
+}
+
+void
+sim_close (SIM_DESC sd, int quitting)
+{
+ /* Nothing to do. */
+}
+
+/* Called by gdb to load a program into memory. */
+
+SIM_RC
+sim_load (SIM_DESC sd, char *prog, bfd *abfd, int from_tty)
+{
+ bfd *prog_bfd;
+
+ /* FIXME: The code below that sets a specific variant of the H8/300
+ being simulated should be moved to sim_open(). */
+
+ /* See if the file is for the H8/300 or H8/300H. */
+ /* ??? This may not be the most efficient way. The z8k simulator
+ does this via a different mechanism (INIT_EXTRA_SYMTAB_INFO). */
+ if (abfd != NULL)
+ prog_bfd = abfd;
+ else
+ prog_bfd = bfd_openr (prog, NULL);
+ if (prog_bfd != NULL)
+ {
+ /* Set the cpu type. We ignore failure from bfd_check_format
+ and bfd_openr as sim_load_file checks too. */
+ if (bfd_check_format (prog_bfd, bfd_object))
+ {
+ set_h8300h (bfd_get_mach (prog_bfd));
+ }
+ }
+
+ /* If we're using gdb attached to the simulator, then we have to
+ reallocate memory for the simulator.
+
+ When gdb first starts, it calls fetch_registers (among other
+ functions), which in turn calls init_pointers, which allocates
+ simulator memory.
+
+ The problem is when we do that, we don't know whether we're
+ debugging an H8/300 or H8/300H program.
+
+ This is the first point at which we can make that determination,
+ so we just reallocate memory now; this will also allow us to handle
+ switching between H8/300 and H8/300H programs without exiting
+ gdb. */
+
+ if (h8300smode && !h8300_normal_mode)
+ memory_size = H8300S_MSIZE;
+ else if (h8300hmode && !h8300_normal_mode)
+ memory_size = H8300H_MSIZE;
+ else
+ memory_size = H8300_MSIZE;
+
+ if (h8_get_memory_buf (sd))
+ free (h8_get_memory_buf (sd));
+ if (h8_get_cache_idx_buf (sd))
+ free (h8_get_cache_idx_buf (sd));
+ if (h8_get_eightbit_buf (sd))
+ free (h8_get_eightbit_buf (sd));
+
+ h8_set_memory_buf (sd, (unsigned char *)
+ calloc (sizeof (char), memory_size));
+ h8_set_cache_idx_buf (sd, (unsigned short *)
+ calloc (sizeof (short), memory_size));
+ sd->memory_size = memory_size;
+ h8_set_eightbit_buf (sd, (unsigned char *) calloc (sizeof (char), 256));
+
+ /* `msize' must be a power of two. */
+ if ((memory_size & (memory_size - 1)) != 0)
+ {
+ (*sim_callback->printf_filtered) (sim_callback,
+ "sim_load: bad memory size.\n");
+ return SIM_RC_FAIL;
+ }
+ h8_set_mask (sd, memory_size - 1);
+
+ if (sim_load_file (sd, myname, sim_callback, prog, prog_bfd,
+ sim_kind == SIM_OPEN_DEBUG,
+ 0, sim_write)
+ == NULL)
+ {
+ /* Close the bfd if we opened it. */
+ if (abfd == NULL && prog_bfd != NULL)
+ bfd_close (prog_bfd);
+ return SIM_RC_FAIL;
+ }
+
+ /* Close the bfd if we opened it. */
+ if (abfd == NULL && prog_bfd != NULL)
+ bfd_close (prog_bfd);
+ return SIM_RC_OK;
+}
+
+SIM_RC
+sim_create_inferior (SIM_DESC sd, struct bfd *abfd, char **argv, char **env)
+{
+ int i = 0;
+ int len_arg = 0;
+ int no_of_args = 0;
+
+ if (abfd != NULL)
+ h8_set_pc (sd, bfd_get_start_address (abfd));
+ else
+ h8_set_pc (sd, 0);
+
+ /* Command Line support. */
+ if (argv != NULL)
+ {
+ /* Counting the no. of commandline arguments. */
+ for (no_of_args = 0; argv[no_of_args] != NULL; no_of_args++)
+ continue;
+
+ /* Allocating memory for the argv pointers. */
+ h8_set_command_line (sd, (char **) malloc ((sizeof (char *))
+ * (no_of_args + 1)));
+
+ for (i = 0; i < no_of_args; i++)
+ {
+ /* Copying the argument string. */
+ h8_set_cmdline_arg (sd, i, (char *) strdup (argv[i]));
+ }
+ h8_set_cmdline_arg (sd, i, NULL);
+ }
+
+ return SIM_RC_OK;
+}
+
+void
+sim_do_command (SIM_DESC sd, char *cmd)
+{
+ (*sim_callback->printf_filtered) (sim_callback,
+ "This simulator does not accept any commands.\n");
+}
+
+void
+sim_set_callbacks (struct host_callback_struct *ptr)
+{
+ sim_callback = ptr;
+}
compile.c
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: config.in
===================================================================
--- config.in (nonexistent)
+++ config.in (revision 842)
@@ -0,0 +1,107 @@
+/* config.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#undef ENABLE_NLS
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_ERRNO_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_FCNTL_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_FPU_CONTROL_H
+
+/* Define to 1 if you have the `getrusage' function. */
+#undef HAVE_GETRUSAGE
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `nsl' library (-lnsl). */
+#undef HAVE_LIBNSL
+
+/* Define to 1 if you have the `socket' library (-lsocket). */
+#undef HAVE_LIBSOCKET
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `sigaction' function. */
+#undef HAVE_SIGACTION
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_PARAM_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_RESOURCE_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_TIME_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the `time' function. */
+#undef HAVE_TIME
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_TIME_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if you have the header file. */
+#undef HAVE_ZLIB_H
+
+/* Define to 1 if you have the `__setfpucw' function. */
+#undef HAVE___SETFPUCW
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Additional package description */
+#undef PKGVERSION
+
+/* Bug reporting address */
+#undef REPORT_BUGS_TO
+
+/* Define as the return type of signal handlers (`int' or `void'). */
+#undef RETSIGTYPE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
Index: tconfig.in
===================================================================
--- tconfig.in (nonexistent)
+++ tconfig.in (revision 842)
@@ -0,0 +1,17 @@
+/* h8300 target configuration file. */
+
+/* Define this if the simulator supports profiling.
+ See the mips simulator for an example.
+ This enables the `-p foo' and `-s bar' options.
+ The target is required to provide sim_set_profile{,_size}. */
+/* #define SIM_HAVE_PROFILE */
+
+/* Define this if the simulator uses an instruction cache.
+ See the h8/300 simulator for an example.
+ This enables the `-c size' option to set the size of the cache.
+ The target is required to provide sim_set_simcache_size. */
+#define SIM_HAVE_SIMCACHE
+
+/* FIXME: This is a quick hack for run.c so it can support the `-h' option.
+ It will eventually be replaced by a more general facility. */
+#define SIM_H8300