URL
https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/gnu-src/binutils-2.18.50/binutils/testsuite
- from Rev 156 to Rev 38
- ↔ Reverse comparison
Rev 156 → Rev 38
/binutils-all/arm/thumb2-cond.s
File deleted
/binutils-all/arm/objdump.exp
File deleted
/binutils-all/fastcall.def
File deleted
/binutils-all/readelf.ss
File deleted
/binutils-all/testprog.c
File deleted
/binutils-all/readelf.h
File deleted
/binutils-all/readelf.r-64
File deleted
/binutils-all/objdump.exp
File deleted
/binutils-all/needed-by-reloc.s
File deleted
/binutils-all/unknown.s
File deleted
/binutils-all/objcopy.exp
File deleted
/binutils-all/readelf.r
File deleted
/binutils-all/readelf.s
File deleted
/binutils-all/dlltool.exp
File deleted
/binutils-all/nm.exp
File deleted
/binutils-all/size.exp
File deleted
/binutils-all/dumptest.s
File deleted
/binutils-all/link-order.s
File deleted
/binutils-all/bintest.s
File deleted
/binutils-all/localize-hidden-1.d
File deleted
/binutils-all/copytest.s
File deleted
/binutils-all/localize-hidden-2.d
File deleted
/binutils-all/readelf.ss-tmips
File deleted
/binutils-all/strip-1.d
File deleted
/binutils-all/strip-2.d
File deleted
/binutils-all/strip-3.d
File deleted
/binutils-all/m68k/movem.s
File deleted
/binutils-all/m68k/objdump.exp
File deleted
/binutils-all/alias.def
File deleted
/binutils-all/hppa/freg.s
File deleted
/binutils-all/hppa/objdump.exp
File deleted
/binutils-all/hppa/addendbug.s
File deleted
/binutils-all/localize-hidden-1.s
File deleted
/binutils-all/readelf.s-64
File deleted
/binutils-all/copy-1.d
File deleted
/binutils-all/copy-2.d
File deleted
/binutils-all/localize-hidden-2.s
File deleted
/binutils-all/copy-3.d
File deleted
/binutils-all/readelf.ss-mips
File deleted
/binutils-all/readelf.exp
File deleted
/binutils-all/ar.exp
File deleted
/binutils-all/group.s
File deleted
/binutils-all/vax/objdump.exp
File deleted
/binutils-all/vax/entrymask.s
File deleted
/binutils-all/empty.s
File deleted
/binutils-all/copy-1.s
File deleted
/binutils-all/windres/dialogid.rc
File deleted
/binutils-all/windres/bmpalign.rsd
File deleted
/binutils-all/windres/printstyle.rc
File deleted
/binutils-all/windres/nocaption.rsd
File deleted
/binutils-all/windres/edittext.rsd
File deleted
/binutils-all/windres/dialog1.rc
File deleted
/binutils-all/windres/strtab2.rc
File deleted
/binutils-all/windres/dlgfont.rsd
File deleted
/binutils-all/windres/quoteclass.rc
File deleted
/binutils-all/windres/deflang.rsd
File deleted
/binutils-all/windres/escapea.rsd
File deleted
/binutils-all/windres/html2.hm
File deleted
\ No newline at end of file
/binutils-all/windres/escapex-2.rc
File deleted
binutils-all/windres/escapex-2.rc
Property changes :
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: binutils-all/windres/nocaption.rc
===================================================================
--- binutils-all/windres/nocaption.rc (revision 156)
+++ binutils-all/windres/nocaption.rc (nonexistent)
@@ -1,4 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-BEGIN
- DEFPUSHBUTTON "OK",1,129,7,50,14
-END
Index: binutils-all/windres/edittext.rc
===================================================================
--- binutils-all/windres/edittext.rc (revision 156)
+++ binutils-all/windres/edittext.rc (nonexistent)
@@ -1,4 +0,0 @@
-501 DIALOG DISCARDABLE 0, 0, 168, 137
-BEGIN
- EDITTEXT 1001, 28, 63, 137, 52
-END
Index: binutils-all/windres/sublang.rc
===================================================================
--- binutils-all/windres/sublang.rc (revision 156)
+++ binutils-all/windres/sublang.rc (nonexistent)
@@ -1,5 +0,0 @@
-LANGUAGE 9, 1
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-BEGIN
- DEFPUSHBUTTON "OK",1,129,7,50,14
-END
Index: binutils-all/windres/version_cat.rsd
===================================================================
--- binutils-all/windres/version_cat.rsd (revision 156)
+++ binutils-all/windres/version_cat.rsd (nonexistent)
@@ -1,55 +0,0 @@
-
-version.res: file format binary
-
-Contents of section .data:
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 ec020000 20000000 ffff1000 ffff0100 .... ...........
- 0030 00000000 00000704 00000000 00000000 ................
- 0040 ec023400 00005600 53005f00 56004500 ..4...V.S._.V.E.
- 0050 52005300 49004f00 4e005f00 49004e00 R.S.I.O.N._.I.N.
- 0060 46004f00 00000000 bd04effe 00000100 F.O.............
- 0070 00000100 01000000 00000100 01000000 ................
- 0080 3f000000 00000000 04000000 01000000 ?...............
- 0090 00000000 00000000 00000000 4c020000 ............L...
- 00a0 00005300 74007200 69006e00 67004600 ..S.t.r.i.n.g.F.
- 00b0 69006c00 65004900 6e006600 6f000000 i.l.e.I.n.f.o...
- 00c0 28020000 00003000 34003000 37003000 (.....0.4.0.7.0.
- 00d0 34006500 34000000 32000900 01004300 4.e.4...2.....C.
- 00e0 6f006d00 70006100 6e007900 4e006100 o.m.p.a.n.y.N.a.
- 00f0 6d006500 00000000 62006900 6e007500 m.e.....b.i.n.u.
- 0100 74006900 6c007300 00000000 42000d00 t.i.l.s.....B...
- 0110 01004600 69006c00 65004400 65007300 ..F.i.l.e.D.e.s.
- 0120 63007200 69007000 74006900 6f006e00 c.r.i.p.t.i.o.n.
- 0130 00000000 52004300 20006300 6f006d00 ....R.C. .c.o.m.
- 0140 70006900 6c006500 72002e00 00000000 p.i.l.e.r.......
- 0150 30000800 01004600 69006c00 65005600 0.....F.i.l.e.V.
- 0160 65007200 73006900 6f006e00 00000000 e.r.s.i.o.n.....
- 0170 31002e00 30002e00 30002e00 31000000 1...0...0...1...
- 0180 38000c00 01004900 6e007400 65007200 8.....I.n.t.e.r.
- 0190 6e006100 6c004e00 61006d00 65000000 n.a.l.N.a.m.e...
- 01a0 77006900 6e006400 72006500 73002e00 w.i.n.d.r.e.s...
- 01b0 65007800 65000000 68002200 01004c00 e.x.e...h."...L.
- 01c0 65006700 61006c00 43006f00 70007900 e.g.a.l.C.o.p.y.
- 01d0 72006900 67006800 74000000 28006300 r.i.g.h.t...(.c.
- 01e0 29002000 46005300 46002e00 20004100 ). .F.S.F... .A.
- 01f0 6c006c00 20007200 69006700 68007400 l.l. .r.i.g.h.t.
- 0200 73002000 61007200 65002000 72006500 s. .a.r.e. .r.e.
- 0210 73006500 72007600 65006400 2e000000 s.e.r.v.e.d.....
- 0220 40000c00 01004f00 72006900 67006900 @.....O.r.i.g.i.
- 0230 6e006100 6c004600 69006c00 65006e00 n.a.l.F.i.l.e.n.
- 0240 61006d00 65000000 77006900 6e006400 a.m.e...w.i.n.d.
- 0250 72006500 73002e00 65007800 65000000 r.e.s...e.x.e...
- 0260 54001a00 01005000 72006f00 64007500 T.....P.r.o.d.u.
- 0270 63007400 4e006100 6d006500 00000000 c.t.N.a.m.e.....
- 0280 77006900 6e006400 6f007700 73002000 w.i.n.d.o.w.s. .
- 0290 72006500 73006f00 75007200 63006500 r.e.s.o.u.r.c.e.
- 02a0 20006300 6f006d00 70006900 6c006500 .c.o.m.p.i.l.e.
- 02b0 72000000 34000800 01005000 72006f00 r...4.....P.r.o.
- 02c0 64007500 63007400 56006500 72007300 d.u.c.t.V.e.r.s.
- 02d0 69006f00 6e000000 31002e00 30002e00 i.o.n...1...0...
- 02e0 30002e00 31000000 44000000 00005600 0...1...D.....V.
- 02f0 61007200 46006900 6c006500 49006e00 a.r.F.i.l.e.I.n.
- 0300 66006f00 00000000 24000400 00005400 f.o.....$.....T.
- 0310 72006100 6e007300 6c006100 74006900 r.a.n.s.l.a.t.i.
- 0320 6f006e00 00000000 0704e404 o.n.........
Index: binutils-all/windres/deflang.rc
===================================================================
--- binutils-all/windres/deflang.rc (revision 156)
+++ binutils-all/windres/deflang.rc (nonexistent)
@@ -1,4 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-BEGIN
- DEFPUSHBUTTON "OK",1,129,7,50,14
-END
Index: binutils-all/windres/printstyle.rsd
===================================================================
--- binutils-all/windres/printstyle.rsd (revision 156)
+++ binutils-all/windres/printstyle.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00000000 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/strtab1.rsd
===================================================================
--- binutils-all/windres/strtab1.rsd (revision 156)
+++ binutils-all/windres/strtab1.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 38000000 20000000 ffff0600 ffff0100 8... ...........
- 0030 00000000 30100000 00000000 00000000 ....0...........
- 0040 00000c00 68006500 6c006c00 6f002c00 ....h.e.l.l.o.,.
- 0050 20007700 6f007200 6c006400 00000000 .w.o.r.l.d.....
- 0060 00000000 00000000 00000000 00000000 ................
- 0070 00000000 00000000 ........
Index: binutils-all/windres/strtab2.rsd
===================================================================
--- binutils-all/windres/strtab2.rsd (revision 156)
+++ binutils-all/windres/strtab2.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 38000000 20000000 ffff0600 ffff0100 8... ...........
- 0030 00000000 30100000 00000000 00000000 ....0...........
- 0040 00000c00 68006500 6c006c00 6f002c00 ....h.e.l.l.o.,.
- 0050 20007700 6f007200 6c006400 00000000 .w.o.r.l.d.....
- 0060 00000000 00000000 00000000 00000000 ................
- 0070 00000000 00000000 ........
Index: binutils-all/windres/listbox.rsd
===================================================================
--- binutils-all/windres/listbox.rsd (revision 156)
+++ binutils-all/windres/listbox.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 32000000 20000000 ffff0500 fffff501 2... ...........
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000a800 ................
- 0050 89000000 00000000 01008050 00000000 ...........P....
- 0060 1c003f00 89003400 e903ffff 83000000 ..?...4.........
- 0070 00000000 ....
Index: binutils-all/windres/capstyle.rsd
===================================================================
--- binutils-all/windres/capstyle.rsd (revision 156)
+++ binutils-all/windres/capstyle.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 0000c880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/checkbox.rsd
===================================================================
--- binutils-all/windres/checkbox.rsd (revision 156)
+++ binutils-all/windres/checkbox.rsd (nonexistent)
@@ -1,12 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 72000000 20000000 ffff0500 fffff501 r... ...........
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 0100ffff 00000000 00000000 00008880 ................
- 0050 02000000 0000a800 89000000 00000000 ................
- 0060 00000000 00000000 02000150 0c004c00 ...........P..L.
- 0070 7b002900 ea030000 ffff8000 ffff6c00 {.)...........l.
- 0080 00000000 00000000 00000000 02000150 ...............P
- 0090 0c000f00 7b002900 e9030000 ffff8000 ....{.).........
- 00a0 74006900 63006b00 20006d00 65000000 t.i.c.k. .m.e...
- 00b0 00000000 ....
Index: binutils-all/windres/escapex-2.rsd
===================================================================
--- binutils-all/windres/escapex-2.rsd (revision 156)
+++ binutils-all/windres/escapex-2.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 3a000000 20000000 ffff0500 ffff6500 :... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 00000250 00000000 _..........P....
- 0060 17002e00 1c000800 ffffffff 8200b000 ................
- 0070 41004200 43000000 00000000 A.B.C.......
Index: binutils-all/windres/MSG00001.bin
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: binutils-all/windres/MSG00001.bin
===================================================================
--- binutils-all/windres/MSG00001.bin (revision 156)
+++ binutils-all/windres/MSG00001.bin (nonexistent)
binutils-all/windres/MSG00001.bin
Property changes :
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: binutils-all/windres/version_cat.rc
===================================================================
--- binutils-all/windres/version_cat.rc (revision 156)
+++ binutils-all/windres/version_cat.rc (nonexistent)
@@ -1,33 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
-
-VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,0,0,1
- PRODUCTVERSION 1,0,0,1
- FILEFLAGSMASK 0x3fL
- FILEFLAGS 0x0L
- FILEOS 0x4L
- FILETYPE 0x1L
- FILESUBTYPE 0x0L
-BEGIN
- BLOCK "StringFileInfo"
- BEGIN
- BLOCK "040704e4"
- BEGIN
- VALUE L"Company" "Name", L"binutil\x0073"
- VALUE "File" "Description", L"RC " L"compiler."
- VALUE "File" "Version", "1.0.0.1"
- VALUE "Internal" "Name", "windres" L".exe"
- VALUE "Legal" "Copyright", "(c) FSF." " All rights are reserved."
- VALUE "Original" "Filename", L"windres" ".exe"
- VALUE "Product" "Name", "windows resource " "compiler"
- VALUE "Product" "Version", "1.0.0.1"
- END
- END
- BLOCK "VarFileInfo"
- BEGIN
- VALUE "Translation", 0x407, 1252
- END
-END
Index: binutils-all/windres/escapex.rsd
===================================================================
--- binutils-all/windres/escapex.rsd (revision 156)
+++ binutils-all/windres/escapex.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 34000000 20000000 ffff0500 ffff6500 4... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 00000250 00000000 _..........P....
- 0060 17002e00 1c000800 ffffffff 8200b000 ................
- 0070 00000000 ....
Index: binutils-all/windres/msupdate
===================================================================
--- binutils-all/windres/msupdate (revision 156)
+++ binutils-all/windres/msupdate (nonexistent)
@@ -1,40 +0,0 @@
-#!/bin/sh
-# Copyright 2001, 2007 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-dejagnu@prep.ai.mit.edu
-
-# Written by DJ Delorie
-
-# Run this on a machine with Cygwin and Microsoft Visual C to create
-# the RES files we match against.
-
-RC="rc"
-if test x"$1" != x""
-then
- RC="$1"
-fi
-
-for i in *.rc
-do
- o=`echo $i | sed s/.rc/.res/`
- d=`echo $i | sed s/.rc/.rsd/`
- echo "$i -> $o -> $d"
- $RC /fo$o $i
- objdump -b binary -s $o | sed -n '/^ [0-9a-f][0-9a-f]* /p' > $d
- rm $o
-done
binutils-all/windres/msupdate
Property changes :
Deleted: svn:executable
## -1 +0,0 ##
-*
\ No newline at end of property
Index: binutils-all/windres/dialog0.rc
===================================================================
--- binutils-all/windres/dialog0.rc (revision 156)
+++ binutils-all/windres/dialog0.rc (nonexistent)
@@ -1,4 +0,0 @@
-101 DIALOG 0, 0, 186, 95
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
Index: binutils-all/windres/sublang.rsd
===================================================================
--- binutils-all/windres/sublang.rsd (revision 156)
+++ binutils-all/windres/sublang.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/strtab1.rc
===================================================================
--- binutils-all/windres/strtab1.rc (revision 156)
+++ binutils-all/windres/strtab1.rc (nonexistent)
@@ -1,9 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE 0, 0
-
-STRINGTABLE MOVEABLE PURE DISCARDABLE
-BEGIN
- 1 "hello, world"
-END
Index: binutils-all/windres/messagetable.rsd
===================================================================
--- binutils-all/windres/messagetable.rsd (revision 156)
+++ binutils-all/windres/messagetable.rsd (nonexistent)
@@ -1,15 +0,0 @@
-
-messagetable.res: file format binary
-
-Contents of section .data:
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 70000000 20000000 ffff0b00 ffff7803 p... .........x.
- 0030 00000000 30100704 00000000 00000000 ....0...........
- 0040 01000000 00000000 05000000 10000000 ................
- 0050 14000000 4e6f7469 63653a20 25310d0a ....Notice: %1..
- 0060 00000000 0c000000 25310d0a 00000000 ........%1......
- 0070 10000000 5761726e 3a202531 0d0a0000 ....Warn: %1....
- 0080 10000000 4572726f 723a2025 310d0a00 ....Error: %1...
- 0090 10000000 46617461 6c3a2025 310d0a00 ....Fatal: %1...
- 00a0 10000000 25310d0a 25320d0a 00000000 ....%1..%2......
Index: binutils-all/windres/dialogsignature.rc
===================================================================
--- binutils-all/windres/dialogsignature.rc (revision 156)
+++ binutils-all/windres/dialogsignature.rc (nonexistent)
@@ -1,5 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-STYLE 1
-BEGIN
- DEFPUSHBUTTON "OK",1,129,7,50,14
-END
Index: binutils-all/windres/lang.rc
===================================================================
--- binutils-all/windres/lang.rc (revision 156)
+++ binutils-all/windres/lang.rc (nonexistent)
@@ -1,16 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE 0, 0
-
-1 MENU MOVEABLE PURE DISCARDABLE
-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
-BEGIN
- POPUP "&Datei" { MENUITEM "foo", 1 }
-END
-
-1 MENU MOVEABLE PURE DISCARDABLE
-LANGUAGE LANG_ENGLISH, SUBLANG_ENGLISH_US
-BEGIN
- POPUP "&File" { MENUITEM "foo", 1 }
-END
Index: binutils-all/windres/scrollbar.rc
===================================================================
--- binutils-all/windres/scrollbar.rc (revision 156)
+++ binutils-all/windres/scrollbar.rc (nonexistent)
@@ -1,4 +0,0 @@
-501 DIALOGEX 0, 0, 168, 137
-BEGIN
- SCROLLBAR 1001,43,68,105,10,0,0,0x81f503e9
-END
Index: binutils-all/windres/capstyle.rc
===================================================================
--- binutils-all/windres/capstyle.rc (revision 156)
+++ binutils-all/windres/capstyle.rc (nonexistent)
@@ -1,5 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-CAPTION ""
-BEGIN
- DEFPUSHBUTTON "OK",1,129,7,50,14
-END
Index: binutils-all/windres/listbox.rc
===================================================================
--- binutils-all/windres/listbox.rc (revision 156)
+++ binutils-all/windres/listbox.rc (nonexistent)
@@ -1,4 +0,0 @@
-501 DIALOG DISCARDABLE 0, 0, 168, 137
-BEGIN
- LISTBOX 1001, 28, 63, 137, 52
-END
Index: binutils-all/windres/html1.hm
===================================================================
--- binutils-all/windres/html1.hm (revision 156)
+++ binutils-all/windres/html1.hm (nonexistent)
@@ -1,11 +0,0 @@
-
-
-
-
- Windres
-
-
-
-This is a test page for windres HTML resource.
-
-
\ No newline at end of file
Index: binutils-all/windres/version.rc
===================================================================
--- binutils-all/windres/version.rc (revision 156)
+++ binutils-all/windres/version.rc (nonexistent)
@@ -1,33 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
-
-VS_VERSION_INFO VERSIONINFO
- FILEVERSION 1,0,0,1
- PRODUCTVERSION 1,0,0,1
- FILEFLAGSMASK 0x3fL
- FILEFLAGS 0x0L
- FILEOS 0x4L
- FILETYPE 0x1L
- FILESUBTYPE 0x0L
-BEGIN
- BLOCK "StringFileInfo"
- BEGIN
- BLOCK "040704e4"
- BEGIN
- VALUE L"CompanyName", L"binutil\x0073"
- VALUE "FileDescription", "RC compiler."
- VALUE "FileVersion", "1.0.0.1"
- VALUE "InternalName", "windres.exe"
- VALUE "LegalCopyright", "(c) FSF. All rights are reserved."
- VALUE "OriginalFilename", "windres.exe"
- VALUE "ProductName", "windows resource compiler"
- VALUE "ProductVersion", "1.0.0.1"
- END
- END
- BLOCK "VarFileInfo"
- BEGIN
- VALUE "Translation", 0x407, 1252
- END
-END
Index: binutils-all/windres/checkbox.rc
===================================================================
--- binutils-all/windres/checkbox.rc (revision 156)
+++ binutils-all/windres/checkbox.rc (nonexistent)
@@ -1,5 +0,0 @@
-501 DIALOGEX DISCARDABLE 0, 0, 168, 137
-BEGIN
- CHECKBOX 108, 1002, 12, 76, 123, 41
- CHECKBOX "tick me", 1001, 12, 15, 123, 41
-END
Index: binutils-all/windres/escapex.rc
===================================================================
--- binutils-all/windres/escapex.rc (revision 156)
+++ binutils-all/windres/escapex.rc (nonexistent)
@@ -1,4 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-BEGIN
- LTEXT "\xB0",-1,23,46,28,8
-END
Index: binutils-all/windres/html.rsd
===================================================================
--- binutils-all/windres/html.rsd (revision 156)
+++ binutils-all/windres/html.rsd (nonexistent)
@@ -1,45 +0,0 @@
-
-html.res: file format binary
-
-Contents of section .data:
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 0d010000 20000000 ffff1700 ffff8100 .... ...........
- 0030 00000000 30100704 00000000 00000000 ....0...........
- 0040 3c21444f 43545950 4520646f 63747970 ...... ..
- 00e0 20203c74 69746c65 3e57696e 64726573 Windres
- 00f0 3c2f7469 746c653e 0d0a3c2f 68656164 ........Thi
- 0110 73206973 20612074 65737420 70616765 s is a test page
- 0120 20666f72 2077696e 64726573 2048544d for windres HTM
- 0130 4c207265 736f7572 63652e0d 0a3c2f62 L resource........
- 0150 14010000 20000000 ffff1700 ffff8200 .... ...........
- 0160 00000000 30100704 00000000 00000000 ....0...........
- 0170 3c21444f 43545950 4520646f 63747970 ...... ..
- 0210 20203c74 69746c65 3e57696e 64726573 Windres
- 0220 3c2f7469 746c653e 0d0a3c2f 68656164 ........Thi
- 0240 73206973 20612073 65636f6e 64207465 s is a second te
- 0250 73742070 61676520 666f7220 77696e64 st page for wind
- 0260 72657320 48544d4c 20726573 6f757263 res HTML resourc
- 0270 652e0d0a 3c2f626f 64793e0d 0a3c2f68 e.....
Index: binutils-all/windres/bmpalign.rc
===================================================================
--- binutils-all/windres/bmpalign.rc (revision 156)
+++ binutils-all/windres/bmpalign.rc (nonexistent)
@@ -1,9 +0,0 @@
-LANGUAGE 0, 0
-
-A BITMAP MOVEABLE PURE DISCARDABLE "bmp1.bmp"
-
-AB BITMAP MOVEABLE PURE DISCARDABLE "bmp1.bmp"
-
-ABC BITMAP MOVEABLE PURE DISCARDABLE "bmp1.bmp"
-
-ABCD BITMAP MOVEABLE PURE DISCARDABLE "bmp1.bmp"
Index: binutils-all/windres/README
===================================================================
--- binutils-all/windres/README (revision 156)
+++ binutils-all/windres/README (nonexistent)
@@ -1,26 +0,0 @@
-Instructions for adding tests:
-
-The files *.rc are hand-edited or copied from elsewhere.
-
-The script msupdate is used to generate the *.rsd files, which are
-dumps of the RES formatted output of MSVC's RC utility.
-
-Within the *.rc file, the first N lines beginning with a special
-comment can control the test. Comments are // /* or # (// is
-recommended, as both rc and windres support those). Each line
-contains one command:
-
- // parse-only
- // xfail *-*-*
-
-parse-only must preceed any xfail commands, and indicates that a
-comparison with the *.rsd file will not happen. xfail indicates when
-a failure is expected. This should only be used for when you are
-adding a new test that is known to fail because of a bug in windres,
-and it should be removed when the bug is fixed.
-
-You can use pfail or cfail instead of xfail to indicate that only the
-parsing or comparing should be xfailed.
-
-The windres tests only run for ix86 targets, because the
-MSVC-generated *.rsd files are generated for that.
Index: binutils-all/windres/combobox.rsd
===================================================================
--- binutils-all/windres/combobox.rsd (revision 156)
+++ binutils-all/windres/combobox.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 32000000 20000000 ffff0500 fffff501 2... ...........
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000a800 ................
- 0050 89000000 00000000 01000150 00000000 ...........P....
- 0060 0a000a00 32003600 e903ffff 85000000 ....2.6.........
- 0070 00000000 ....
Index: binutils-all/windres/messagetable.rc
===================================================================
--- binutils-all/windres/messagetable.rc (revision 156)
+++ binutils-all/windres/messagetable.rc (nonexistent)
@@ -1,6 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
-
-888 MESSAGETABLE MSG00001.bin
Index: binutils-all/windres/dlgfont.rc
===================================================================
--- binutils-all/windres/dlgfont.rc (revision 156)
+++ binutils-all/windres/dlgfont.rc (nonexistent)
@@ -1,29 +0,0 @@
-101 DIALOG DISCARDABLE 0, 0, 186, 95
-FONT 8, "Tahoma"
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
-
-102 DIALOGEX DISCARDABLE 0, 0, 186, 95
-FONT 8, "Tahoma"
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
-
-103 DIALOGEX DISCARDABLE 0, 0, 186, 95
-FONT 8, "Tahoma", 0
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
-
-104 DIALOGEX DISCARDABLE 0, 0, 186, 95
-FONT 8, "Tahoma", 0, 0
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
-
-105 DIALOGEX DISCARDABLE 0, 0, 186, 95
-FONT 8, "Tahoma", 0, 0, 1
-BEGIN
- DEFPUSHBUTTON "OK", 1, 129, 7, 50, 14
-END
Index: binutils-all/windres/dialogid.rsd
===================================================================
--- binutils-all/windres/dialogid.rsd (revision 156)
+++ binutils-all/windres/dialogid.rsd (nonexistent)
@@ -1,18 +0,0 @@
-
-fred.res: file format binary
-
-Contents of section .data:
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 94000000 20000000 ffff0500 ffff6500 .... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 0100ffff 00000000 00000000 00008880 ................
- 0050 02000000 0000c800 c8000000 00000000 ................
- 0060 00000000 00000000 4d000050 0b000b00 ........M..P....
- 0070 5300a200 ffffffff 43004c00 41005300 S.......C.L.A.S.
- 0080 53004e00 41004d00 45000000 ffff6c00 S.N.A.M.E.....l.
- 0090 00000000 00000000 00000000 0e120050 ...............P
- 00a0 05000500 0a000a00 66000000 43004c00 ........f...C.L.
- 00b0 41005300 53004e00 41004d00 45000000 A.S.S.N.A.M.E...
- 00c0 73007400 72006900 6e006700 69006400 s.t.r.i.n.g.i.d.
- 00d0 00000000 ....
Index: binutils-all/windres/escapea.rc
===================================================================
--- binutils-all/windres/escapea.rc (revision 156)
+++ binutils-all/windres/escapea.rc (nonexistent)
@@ -1,7 +0,0 @@
-20 MENU DISCARDABLE
-BEGIN
- POPUP "&File"
- BEGIN
- MENUITEM "&Open\a^O", 17
- END
-END
Index: binutils-all/windres/windres.exp
===================================================================
--- binutils-all/windres/windres.exp (revision 156)
+++ binutils-all/windres/windres.exp (nonexistent)
@@ -1,136 +0,0 @@
-# Copyright 2001, 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-dejagnu@prep.ai.mit.edu
-
-# Written by DJ Delorie
-
-if {![istarget "i*86-*-*"] && ![istarget "x86_64-*-mingw*"] } {
- return
-}
-
-if {![info exists WINDRES]} then {
- return
-}
-
-if {[which $WINDRES] == 0} then {
- return
-}
-
-set wr "$WINDRES --include-dir $srcdir/$subdir"
-
-if [file exists "$srcdir/../../winsup/w32api/include"] {
- set wr "$wr --include-dir $srcdir/../../winsup/w32api/include"
-} else {
- send_log "\nWarning: Assuming windres can find the win32 headers\n\n"
-}
-
-set res_list [lsort [glob -nocomplain $srcdir/$subdir/*.rc]]
-
-proc oneline { file } {
- while { 1 } {
- if { [gets $file line] == -1 } {
- return ""
- }
- if [regexp "^ \[0-9a-z\]\[0-9a-z\]* " $line] {
- return $line
- }
- }
-}
-
-foreach res $res_list {
- set sroot [file rootname $res]
- set broot [file tail $sroot]
- set done 0
-
- set rc [open $res]
- while { [gets $rc line] != -1 } {
- if ![regexp "^(//|/\*|#)" $line] {
- break
- }
- if [regexp "\[xp\]fail *(\[^ \]*)" $line junk sys] {
- setup_xfail $sys
- continue
- }
- }
-
- verbose "$wr -J rc -O res $res tmpdir/$broot.res" 1
- catch "exec $wr -J rc -O res $res tmpdir/$broot.res" err
-
- if ![string match "" $err] then {
- send_log "$err\n"
- verbose "$err" 1
- if [string match "*windows.h: No such file*" $err] then {
- unsupported "windres/$broot (parse)"
- } else {
- fail "windres/$broot (parse)"
- }
- continue
- }
- pass "windres/$broot (parse)"
-
- set rc [open $res]
- while { [gets $rc line] != -1 } {
- if ![regexp "^(//|/\*|#)" $line] {
- break
- }
- if [regexp "parse-only" $line] {
- file delete "tmpdir/$broot.res"
- set done 1
- break
- }
- if [regexp "\[xc\]fail *(\[^ \]*)" $line junk sys] {
- setup_xfail $sys
- continue
- }
- }
- if { $done != 0 } {
- continue
- }
-
- verbose "$OBJDUMP -b binary -s tmpdir/$broot.res > tmpdir/$broot.dump" 1
- catch "exec $OBJDUMP -b binary -s tmpdir/$broot.res > tmpdir/$broot.dump" err
-
- if ![string match "" $err] then {
- send_log "$err\n"
- verbose "$err" 1
- fail "windres/$broot (compare)"
- continue
- }
-
- set pat [open "$sroot.rsd"]
- set out [open "tmpdir/$broot.dump"]
- set patline "foo"
-
- while { ![string match $patline ""] } {
- set patline [oneline $pat]
- set outline [oneline $out]
-
- if ![string match $patline $outline] {
- send_log "< $patline\n"
- send_log "> $outline\n"
- fail "windres/$broot (compare)"
- set done 1
- break
- }
- }
- if { $done == 0 } {
- pass "windres/$broot (compare)"
- file delete "tmpdir/$broot.res"
- file delete "tmpdir/$broot.dump"
- }
-}
Index: binutils-all/windres/dialog0.rsd
===================================================================
--- binutils-all/windres/dialog0.rsd (revision 156)
+++ binutils-all/windres/dialog0.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/dialog1.rsd
===================================================================
--- binutils-all/windres/dialog1.rsd (revision 156)
+++ binutils-all/windres/dialog1.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 00008880 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/html.rc
===================================================================
--- binutils-all/windres/html.rc (revision 156)
+++ binutils-all/windres/html.rc (nonexistent)
@@ -1,7 +0,0 @@
-//#xfail x86_64-*-mingw*
-#include "windows.h"
-
-LANGUAGE LANG_GERMAN, SUBLANG_GERMAN
-
-129 HTML "html1.hm"
-130 HTML "html2.hm"
Index: binutils-all/windres/dialogsignature.rsd
===================================================================
--- binutils-all/windres/dialogsignature.rsd (revision 156)
+++ binutils-all/windres/dialogsignature.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 36000000 20000000 ffff0500 ffff6500 6... .........e.
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 01000000 00000000 01000000 0000ba00 ................
- 0050 5f000000 00000000 01000150 00000000 _..........P....
- 0060 81000700 32000e00 0100ffff 80004f00 ....2.........O.
- 0070 4b000000 00000000 K.......
Index: binutils-all/windres/lang.rsd
===================================================================
--- binutils-all/windres/lang.rsd (revision 156)
+++ binutils-all/windres/lang.rsd (nonexistent)
@@ -1,10 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 20000000 20000000 ffff0400 ffff0100 ... ...........
- 0030 00000000 30100704 00000000 00000000 ....0...........
- 0040 00000000 90002600 44006100 74006500 ......&.D.a.t.e.
- 0050 69000000 80000100 66006f00 6f000000 i.......f.o.o...
- 0060 1e000000 20000000 ffff0400 ffff0100 .... ...........
- 0070 00000000 30100904 00000000 00000000 ....0...........
- 0080 00000000 90002600 46006900 6c006500 ......&.F.i.l.e.
- 0090 00008000 01006600 6f006f00 00000000 ......f.o.o.....
Index: binutils-all/windres/scrollbar.rsd
===================================================================
--- binutils-all/windres/scrollbar.rsd (revision 156)
+++ binutils-all/windres/scrollbar.rsd (nonexistent)
@@ -1,8 +0,0 @@
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 40000000 20000000 ffff0500 fffff501 @... ...........
- 0030 00000000 30100904 00000000 00000000 ....0...........
- 0040 0100ffff 00000000 00000000 00008880 ................
- 0050 01000000 0000a800 89000000 00000000 ................
- 0060 e903f581 00000000 00000050 2b004400 ...........P+.D.
- 0070 69000a00 e9030000 ffff8400 00000000 i...............
Index: binutils-all/windres/combobox.rc
===================================================================
--- binutils-all/windres/combobox.rc (revision 156)
+++ binutils-all/windres/combobox.rc (nonexistent)
@@ -1,8 +0,0 @@
-#define CBS_SIMPLE 0x1
-#define WS_TABSTOP 0x10000
-
-501 DIALOG DISCARDABLE 0, 0, 168, 137
-BEGIN
- COMBOBOX 1001,10,10,50,54, CBS_SIMPLE | WS_TABSTOP
-END
-
Index: binutils-all/windres/version.rsd
===================================================================
--- binutils-all/windres/version.rsd (revision 156)
+++ binutils-all/windres/version.rsd (nonexistent)
@@ -1,55 +0,0 @@
-
-version.res: file format binary
-
-Contents of section .data:
- 0000 00000000 20000000 ffff0000 ffff0000 .... ...........
- 0010 00000000 00000000 00000000 00000000 ................
- 0020 ec020000 20000000 ffff1000 ffff0100 .... ...........
- 0030 00000000 00000704 00000000 00000000 ................
- 0040 ec023400 00005600 53005f00 56004500 ..4...V.S._.V.E.
- 0050 52005300 49004f00 4e005f00 49004e00 R.S.I.O.N._.I.N.
- 0060 46004f00 00000000 bd04effe 00000100 F.O.............
- 0070 00000100 01000000 00000100 01000000 ................
- 0080 3f000000 00000000 04000000 01000000 ?...............
- 0090 00000000 00000000 00000000 4c020000 ............L...
- 00a0 00005300 74007200 69006e00 67004600 ..S.t.r.i.n.g.F.
- 00b0 69006c00 65004900 6e006600 6f000000 i.l.e.I.n.f.o...
- 00c0 28020000 00003000 34003000 37003000 (.....0.4.0.7.0.
- 00d0 34006500 34000000 32000900 01004300 4.e.4...2.....C.
- 00e0 6f006d00 70006100 6e007900 4e006100 o.m.p.a.n.y.N.a.
- 00f0 6d006500 00000000 62006900 6e007500 m.e.....b.i.n.u.
- 0100 74006900 6c007300 00000000 42000d00 t.i.l.s.....B...
- 0110 01004600 69006c00 65004400 65007300 ..F.i.l.e.D.e.s.
- 0120 63007200 69007000 74006900 6f006e00 c.r.i.p.t.i.o.n.
- 0130 00000000 52004300 20006300 6f006d00 ....R.C. .c.o.m.
- 0140 70006900 6c006500 72002e00 00000000 p.i.l.e.r.......
- 0150 30000800 01004600 69006c00 65005600 0.....F.i.l.e.V.
- 0160 65007200 73006900 6f006e00 00000000 e.r.s.i.o.n.....
- 0170 31002e00 30002e00 30002e00 31000000 1...0...0...1...
- 0180 38000c00 01004900 6e007400 65007200 8.....I.n.t.e.r.
- 0190 6e006100 6c004e00 61006d00 65000000 n.a.l.N.a.m.e...
- 01a0 77006900 6e006400 72006500 73002e00 w.i.n.d.r.e.s...
- 01b0 65007800 65000000 68002200 01004c00 e.x.e...h."...L.
- 01c0 65006700 61006c00 43006f00 70007900 e.g.a.l.C.o.p.y.
- 01d0 72006900 67006800 74000000 28006300 r.i.g.h.t...(.c.
- 01e0 29002000 46005300 46002e00 20004100 ). .F.S.F... .A.
- 01f0 6c006c00 20007200 69006700 68007400 l.l. .r.i.g.h.t.
- 0200 73002000 61007200 65002000 72006500 s. .a.r.e. .r.e.
- 0210 73006500 72007600 65006400 2e000000 s.e.r.v.e.d.....
- 0220 40000c00 01004f00 72006900 67006900 @.....O.r.i.g.i.
- 0230 6e006100 6c004600 69006c00 65006e00 n.a.l.F.i.l.e.n.
- 0240 61006d00 65000000 77006900 6e006400 a.m.e...w.i.n.d.
- 0250 72006500 73002e00 65007800 65000000 r.e.s...e.x.e...
- 0260 54001a00 01005000 72006f00 64007500 T.....P.r.o.d.u.
- 0270 63007400 4e006100 6d006500 00000000 c.t.N.a.m.e.....
- 0280 77006900 6e006400 6f007700 73002000 w.i.n.d.o.w.s. .
- 0290 72006500 73006f00 75007200 63006500 r.e.s.o.u.r.c.e.
- 02a0 20006300 6f006d00 70006900 6c006500 .c.o.m.p.i.l.e.
- 02b0 72000000 34000800 01005000 72006f00 r...4.....P.r.o.
- 02c0 64007500 63007400 56006500 72007300 d.u.c.t.V.e.r.s.
- 02d0 69006f00 6e000000 31002e00 30002e00 i.o.n...1...0...
- 02e0 30002e00 31000000 44000000 00005600 0...1...D.....V.
- 02f0 61007200 46006900 6c006500 49006e00 a.r.F.i.l.e.I.n.
- 0300 66006f00 00000000 24000400 00005400 f.o.....$.....T.
- 0310 72006100 6e007300 6c006100 74006900 r.a.n.s.l.a.t.i.
- 0320 6f006e00 00000000 0704e404 o.n.........
Index: binutils-all/windres/bmp1.bmp
===================================================================
Cannot display: file marked as a binary type.
svn:mime-type = application/octet-stream
Index: binutils-all/windres/bmp1.bmp
===================================================================
--- binutils-all/windres/bmp1.bmp (revision 156)
+++ binutils-all/windres/bmp1.bmp (nonexistent)
binutils-all/windres/bmp1.bmp
Property changes :
Deleted: svn:mime-type
## -1 +0,0 ##
-application/octet-stream
\ No newline at end of property
Index: binutils-all/readelf.ss-64
===================================================================
--- binutils-all/readelf.ss-64 (revision 156)
+++ binutils-all/readelf.ss-64 (nonexistent)
@@ -1,13 +0,0 @@
-
-Symbol table '.symtab' contains .* entries:
- Num: Value Size Type Bind Vis Ndx Name
- 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
- 1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
- 2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
- 3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
- 4: 0000000000000000 0 NOTYPE LOCAL DEFAULT 1 static_text_symbol
- 5: 0000000000000000 0 NOTYPE LOCAL DEFAULT 3 static_data_symbol
-.* .: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 1 text_symbol
- .: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND external_symbol
- .: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 data_symbol
- .: 0000000000000004 4 (COMMON|OBJECT) GLOBAL DEFAULT COM common_symbol
Index: ChangeLog-9303
===================================================================
--- ChangeLog-9303 (revision 156)
+++ ChangeLog-9303 (nonexistent)
@@ -1,1044 +0,0 @@
-2003-12-03 Nick Clifton
-
- * binutils-all/objdump.exp (cpus_expected): Add "msp".
-
-2003-10-06 Dave Brolley
-
- * binutils-all/objdump.exp (cpu_expected): Add fr550.
-
-2003-09-29 H.J. Lu
-
- * binutils-all/readelf.exp: Use is_elf_format.
-
- * binutils-all/readelf.h: Support IA64/ILP32.
- * binutils-all/readelf.s: Likewise.
- * binutils-all/readelf.ss: Likewise.
-
- * lib/utils-lib.exp (proc is_elf_format): Copy from ld
- testsuite. Add ia64-*-hpux*.
-
-2003-06-29 Danny Smith
-
- * binutils-all/objcopy.exp: Initialise $test_prog to
- testprog.exe on mingw targeted systems too.
-
-2003-06-28 Danny Smith
-
- * binutils-all/windres/checkbox.rc: New file.
- * binutils-all/windres/checkbox.rsd: New file.
- * binutils-all/windres/combobox.rc: New file.
- * binutils-all/windres/combobox.rsd: New file.
- * binutils-all/windres/edittext.rc: New file.
- * binutils-all/windres/edittext.rsd: New file.
- * binutils-all/windres/listbox.rc: New file.
- * binutils-all/windres/listbox.rsd: New file.
- * binutils-all/windres/scrollbar.rc: New file.
- * binutils-all/windres/scrollbar.rsd: New file.
-
-2003-06-27 Thiemo Seufer
-
- * binutils-all/readelf.ss-tmips: Adjust symbol indices.
-
-2003-06-19 Nick Clifton
-
- * binutils-all/objcopy.exp: Replace occurances of testprog with
- $test_prog. Initialise this variable to testprog.exe on Cygwin
- targeted systems.
-
-2003-04-26 Nick Clifton
-
- * binutils-all/readelf.exp (prune_read_warnings): Rename to
- prune_readelf_wi_warnings.
- (readelf_wi_test): New proc: Test 'readelf -wi' by grepping
- through its output.
- Replace invocation of "readelf_test -wi" with "readelf_wi_test"
- * binutils-all/readelf.wi: Delete.
-
-2003-04-23 Nick Clifton
-
- * binutils-all/readelf.exp (proc prune_readelf_warnings): New
- function.
- (proc readelf_test): Prune warning messages.
- (readelf_test -wi): Add more expected failures.
- * binutils-all/readelf.wi: Severly reduce expected output.
- * binutils-all/testprog.c (string): Explicitly use unsigned
- chars.
- (stdio.h, string.h): Remove inclusion.
-
-2003-04-23 J"orn Rennecke
-
- * binutils-all/readelf.wi: Update.
-
-2003-04-22 Dimitrie O. Paun
-
- * binutils-all/windres/windres.exp: Add test for the new -J
- option. Remove use of -I as it now generates a warning message.
-
-2003-04-03 Nick Clifton
-
- * binutils-all/windres/dialogid.rc: Replace "Static" with
- "classname" so that compilation will match behaviour of the
- Windows resource compiler.
-
-2003-03-31 Nick Clifton
-
- * binutils-all/windres/dialogid.rc: New test source file.
- * binutils-all/windres/dialogid.rsd: New test expected results.
-
-2002-11-07 Casper S. Hornstrup
-
- * binutils-all/dlltool.exp: New file for testing dlltool.
- * binutils-all/fastcall.def: New file for testing fastcall
- exports.
- * config/default.exp: Set DLLTOOL variable.
-
-2002-08-27 Alan Modra
-
- * binutils-all/objcopy.exp: Revert last change.
-
-2002-08-26 Alan Modra
-
- * binutils-all/objcopy.exp (strip_test): Adjust for "no symbols" on
- stdout.
- (strip_executable): Likewise.
-
-2002-08-13 Alan Modra
-
- * binutils-all/objdump.exp (cpus_expected): Add fr500, ip2022,
- tic80, tms320c30.
- * binutils-all/objcopy.exp (simple copy): Revise xfails.
-
-2002-05-29 Alan Modra
-
- * binutils-all/objcopy.exp (strip_test_with_saving_a_symbol):
- Revert 2001-11-15. Instead allow `D main'.
-
-2002-04-16 Eric Kohl
-
- * binutils-all/windres/dialog0.rc: New test case: Check default
- attributes for dialogs
- * binutils-all/windres/dialog0.rsd: New file: Expected output.
- * binutils-all/windres/dialog1.rc: New test case: Check
- DISCARDABLE flag is propogated.
- * binutils-all/windres/dialog1.rsd: New file: Expected output.
-
-2002-04-15 Eric Kohl
-
- * binutils-all/windres/dlgfont.rc: New test case: Checks FONT
- statement in DIALOG and DIALOGEX resources.
- * binutils-all/windres/dlgfont.rsd: Expected output.
-
-2002-04-11 Nick Clifton
-
- * binutils-all/ar.exp (long_filenames): Use 'file delete' instead
- of 'exec rm -f'.
-
-2002-04-10 Nick Clifton
-
- * binutils-all/ar.exp (long_filenames): Delete the abc... files
- upon successfully completion of the test.
-
- * binutils-all/windres/capstyle.rsd: Regenerate using MSVC.
- * binutils-all/windres/deflang.rsd: Regenerate using MSVC.
- * binutils-all/windres/dialogsignature.rsd: Regenerate using MSVC.
- * binutils-all/windres/escapea.rsd: Regenerate using MSVC.
- * binutils-all/windres/escapex.rsd: Regenerate using MSVC.
- * binutils-all/windres/nocaption.rsd: Regenerate using MSVC.
- * binutils-all/windres/printstyle.rsd: Regenerate using MSVC.
- * binutils-all/windres/sublang.rsd: Regenerate using MSVC.
-
-2002-04-09 Nick Clifton
-
- * binutils-all/windres/capstyle.rc: New test case: Set default
- style for captions.
- * binutils-all/windres/capstyle.rsd: Expected output.
-
- * binutils-all/windres/deflang.rc: New test case: Check default
- language.
- * binutils-all/windres/deflang.rsd: Expected output.
-
- * binutils-all/windres/dialogsignature.rc: New test case for
- decoding the dialog signature.
- * binutils-all/windres/dialogsignature.rsd: Expected output.
-
- * binutils-all/windres/escapea.rc: New test case for encoding \a
- escape sequence.
- * binutils-all/windres/escapea.rsd: Expected output.
-
- * binutils-all/windres/escapex.rc: New test case for hex constants
- in strings.
- * binutils-all/windres/escapex.rsd: Expected output
-
- * binutils-all/windres/nocaption.rc: New test case dialogs without
- captions.
- * binutils-all/windres/nocaption.rsd: Expected output
-
- * binutils-all/windres/quoteclass.rc: New test case for quoted
- CLASS definitions in DIALOG resources.
-
- * binutils-all/windres/sublang.rc: New test case: Check assignment
- of sub-language.
- * binutils-all/windres/sublang.rsd: Expected output.
-
-2002-02-18 Timothy Daly
-
- * binutils-all/readelf.r: Change expected output to match new,
- narrowed-to-80-chars format.
- * binutils-all/readelf.r-64: Change expected output to match new,
- narrowed-to-80-chars format.
-
-2002-02-18 Hans-Peter Nilsson
-
- * binutils-all/objcopy.exp
- (strip_executable_with_saving_a_symbol): Prune symbol Main in nm
- output for mmix-knuth-mmixware.
-
-2002-02-13 Nick Clifton
-
- * binutils-all/readelf.ss-mips: Do not expect an explicit
- ordering of the sections.
-
-2002-02-10 Nick Clifton
-
- * binutils-all/objdump.exp: Add 'xscale' to the list of expected
- CPUs.
-
-2002-01-14 Nick Clifton
-
- * binutils-all/objcopy.exp: Expect xscale-coff to fail simple
- objcopy test for the same reason as arm-coff.
-
-2001-11-29 H.J. Lu
-
- * binutils-all/objcopy.exp (strip_test): Add strip on archive.
-
-2001-11-15 Alan Modra
-
- * binutils-all/objcopy.exp: (strip_test_with_saving_a_symbol):
- Allow '? main', to suit powerpc64.
-
-2001-11-14 Geoffrey Keating
-
- * binutils-all/readelf.exp: powerpc-*-eabi* is an ELF target.
-
-2001-10-03 Thiemo Seufer
-
- * binutils-all/readelf.exp: Exclude mips*-*-elf* from 'readelf -wi'
- test.
-
-Tue Sep 4 20:25:41 2001 Jeffrey A Law (law@cygnus.com)
-
- * binutils/all/readelf.exp: Expect readelf -wi to
- fail for the H8 series.
-
-2001-08-27 Alan Modra
-
- * binutils-all/readelf.s-64: Adjust offsets for powerpc64. Don't
- use constructs like [45][08] when all combinations are not valid.
- Instead use (48|50) to explicitly state which values are correct.
-
-2001-08-21 H.J. Lu
-
- * binutils-all/readelf.r: Updated for the readelf change.
-
- * binutils-all/readelf.r-64: New for the readelf change.
-
-2001-07-27 H.J. Lu
-
- * binutils-all/windres/windres.exp: Don't set xfail for
- bmpalign (compare) on none-ix86/pe targets.
-
-2001-07-24 H.J. Lu
-
- * binutils-all/windres/windres.exp: Set xfail on none-ix86/pe
- targets.
-
-2001-07-18 DJ Delorie
-
- * config/default.exp (WINDRES): Add.
- * binutils-all/windres/windres.exp: New.
- * binutils-all/windres/README: New.
- * binutils-all/windres/bmp1.bmp: New.
- * binutils-all/windres/bmpalign.rc: New.
- * binutils-all/windres/bmpalign.rsd: New.
- * binutils-all/windres/lang.rc: New.
- * binutils-all/windres/lang.rsd: New.
- * binutils-all/windres/msupdate: New.
- * binutils-all/windres/strtab1.rc: New.
- * binutils-all/windres/strtab1.rsd: New.
-
-2001-07-05 Ben Elliston
-
- * lib/utils-lib.exp (target_assemble): Remove duplicate copy.
- (default_target_assemble): Likewise.
-
-2001-06-18 Thiemo Seufer
-
- * binutils-all/readelf.exp: Typo.
-
-2001-06-19 Andreas Jaeger
-
- * binutils-all/readelf.r: Don't check for specific info value to
- pass testsuite on ia64 and alpha.
-
-2001-06-07 H.J. Lu
-
- * binutils-all/readelf.ss-mips: Support stabs.
- * binutils-all/readelf.ss-tmips: Likewise.
-
-2001-05-25 H.J. Lu
-
- * binutils-all/readelf.exp (readelf_test): Set target_machine
- to tmips for traditional mips.
-
- * binutils-all/readelf.s: Support traditional mips.
-
- * binutils-all/readelf.ss-tmips: New for traditional mips.
-
-2001-05-25 Alan Modra
-
- * binutils-all/readelf.exp: Replace linuxoldld with linux*oldld
- and linuxaout with linux*aout.
- * binutils-all/objcopy.exp: Remove xfail for linuxaout.
-
-2001-05-24 H.J. Lu
-
- * binutils-all/objdump.exp (cpus_expected): Add s390.
-
-2001-03-30 H.J. Lu
-
- * binutils-all/readelf.exp: Run on more ELF targets.
-
-2001-02-11 H.J. Lu
-
- * config/default.exp: Set up gcc_gas_flag.
-
- * binutils-all/objcopy.exp (copy_setup): Process gcc_gas_flag
- for Linux only.
-
- * binutils-all/testprog.c: Include and don't use
- exit ().
-
-2001-01-16 Matthew Green
-
- * binutils-all/readelf.s-64: Match readelf -S output.
-
-2000-12-09 Nick Clifton
-
- * binutils-all/objdump.exp (cpus_expected): Add tic54x and
- tms320c54x.
-
-2000-11-28 Hans-Peter Nilsson
-
- * binutils-all/readelf.s: Adjust to readelf.c formatting changes.
-
-2000-11-02 Chris Demetriou
-
- * binutils-all/readelf.exp (regexp_diff): Add code
- from gas testsuite to treat "#..." at beginning of line
- as an indicator to skip extra non-matching lines at that
- location.
- (readelf_test): Add support for using a machine-specific
- regexp comparison file.
- (readelf -S test, readelf -s test): Remove v850*-*-* and
- mips*-*-* from list of expected failures.
- * binutils-all/readelf.s: Accomodate changes due to
- additional sections (and therefore section numbering
- differences) on v850*-*-* and mips*-*-* targets.
- * binutils-all/readelf.ss: Likewise.
- * binutils-all/readelf.ss-mips: New file, which matches
- expected output of readelf -s test for mips*-*-*.
-
-2000-10-25 Hans-Peter Nilsson
-
- * binutils-all/readelf.exp (-wi test): Add cris-*-* to xfails.
-
-2000-10-19 Chris Demetriou
-
- * binutils-all/readelf.exp (readelf_test): Work properly
- when multiple targets expect failtures.
- (readelf -S test, readelf -s test): Expect mips*-*-*
- to fail.
-
-2000-07-10 Alan Modra
-
- * lib/utils-lib.exp (default_binutils_assemble): Don't do the hppa
- sed fudges for hppa-linux.
-
-2000-07-01 Frank Ch. Eigler
-
- * binutils-all/objdump.exp (cpus_expected, cpus_regex): Reorganize
- syntax to display more tcl nature.
-
-2000-06-18 Stephane Carrez
-
- * binutils-all/objdump.exp (cpus_expected): Recognize m68hc11 and
- m68hc12.
-
-2000-06-18 Nick Clifton
-
- * binutils-all/readelf.wi: Do not assume the compilation tag to be
- unit 1.
-
- * binutils-all/objcopy.exp: Expect all arm variants to fail the
- copying executable test.
-
-2000-06-14 Hans-Peter Nilsson
-
- * binutils-all/readelf.exp (regexp_diff): Do not break when a
- mismatching line is found.
- (readelf_find_size): New.
- (readelf_size): New global variable.
- (readelf_test): Add newline to send_log of command.
- If $srcdir/$subdir/$regexp_file-$readelf_size exists, use it
- instead of $srcdir/$subdir/$regexp_file.
- (*-*elf test): Fix typo in message.
- * binutils-all/readelf.s-64: New.
- * binutils-all/readelf.ss-64: New.
-
-2000-05-02 Alan Modra
-
- * binutils-all/objcopy.exp (simple copy): Clear xfail for hppa-linux.
-
- * binutils-all/hppa/objdump.exp: Disable test for elf.
-
-2000-03-13 Nick Clifton
-
- * binutils-all/readelf.s: Adjust to match new format of readelf
- output.
- * binutils-all/readelf.ss: Adjust to match new format of readelf
- output.
-
-1999-11-01 Nick Clifton
-
- * binutils-all/objcopy.exp: Expect simple objcopy test to fail
- for COFF based ARM and Thumb ports.
-
-Tue Sep 14 00:28:17 1999 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/hppa/objdump.exp: Do not run for PA64.
-
-1999-09-04 Steve Chamberlain
-
- * binutils-all/objdump.exp: Add pj to cpus_expected.
-
-Sat Aug 28 00:24:27 1999 Jerry Quinn
-
- * binutils-all/hppa/freg.s: New file.
- * binutils-all/hppa/objdump.exp: Add freg.s test.
-
-1999-08-09 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for i*86-*-msdos*.
-
-1999-07-21 H.J. Lu
-
- * binutils-all/testprog.c: Include .
-
-1999-06-29 Nick Clifton
-
- * binutils-all/objdump.exp: Add fr30 and MCore to expected cpus
- list.
-
- * binutils-all/readelf.r: Do not assume a fixed number of spaces
- in the output.
-
-1999-06-10 Nick Clifton
-
- * binutils-all/readelf.wi: Update to match latest output.
- * binutils-all/readelf.h: Update to match latest output.
-
-Wed Jun 9 11:59:22 1999 Andreas Schwab
-
- * binutils-all/objdump.exp: Tighten regexp to match `objdump -i'
- output to avoid massive exponential behaviour.
-
-1999-05-28 Ian Lance Taylor
-
- * binutils-all/readelf.h: Update for changes of 1999-04-08.
-
-1999-03-12 Nick Clifton
-
- * binutils-all/readelf.wi: Remove FR30 specific components.
- * binutils-all/readelf.s: Remove RELA specific components.
-
-1999-02-16 Nick Clifton
-
- * binutils-all/readelf.s: Do not assume section alignment is 4.
- * binutils-all/readelf.r: Do not assume rela's are being used.
- * binutils-all/readelf.exp: disable tests for non ELF based
- targets.
-
-1999-02-02 Nick Clifton
-
- * binutils-all/readelf.wi: Amend to match new readelf output.
- * binutils-all/readelf.r: Do not assume that RELAs will be used.
-
-1999-01-29 Nick Clifton
-
- * config/default.exp: Add definitions of READELF and READELFFLAGS.
-
- * binutils-all/readelf.exp: New file: Readelf tests
- * binutils-all/readelf.h: New file: Expected results for 'readelf -h'
- * binutils-all/readelf.s: New file: Expected results for 'readelf -S'
- * binutils-all/readelf.ss: New file: Expected results for 'readelf -s'
- * binutils-all/readelf.r: New file: Expected results for 'readelf -r'
- * binutils-all/readelf.wi: New file: Expected results for 'readelf -wi'
-
-Wed Dec 9 19:11:39 1998 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp (copy_executable): Expect comparison
- failure for mips*-*-elf.
-
-Fri Oct 16 22:57:12 1998 Felix Lee
-
- * binutils-all/objcopy.exp: fix "no symbols" message.
-
-Tue Jul 28 15:14:04 1998 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: Keep "main" and "_main" for strip with
- saving symbol tests. Look for either "main" or "_main" in the output
- file. Fix test for "no symbols" in the output file.
-
-1998-07-22 Vladimir N. Makarov
-
- * binutils-all/objcopy.exp: Polish output about fail for objcopy
- (simple copy), strip with/without saving a symbol for object file
- and executable.
-
-Wed Jul 1 16:27:40 1998 Nick Clifton
-
- * binutils-all/objcopy.exp: ARM simple objcopy now passes.
-
-Wed Jun 24 09:20:21 1998 Nick Clifton
-
- * binutils-all/objdump.exp: Look for '.data' rather than 'data'
- when parsing output of objdump -h.
- * binutils-all/size.exp: Look for '.data' rather than 'data' when
- parsing output of size -A.
-
-1998-07-20 Vladimir N. Makarov
-
- * binutils-all/objcopy.exp: Two new tests - strip object file with
- saving a symbol and strip executable file with saving a symbol.
-
-Fri May 29 14:50:24 1998 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Don't xfail the simple objcopy test
- when cross compiling.
-
-Thu Nov 6 14:32:37 1997 Bob Manson
-
- * lib/utils-lib.exp: Temporary definition of target_assemble and
- default_target_assemble so that testing can work with older
- dejagnu versions.
-
-Wed Sep 24 12:09:15 1997 Bob Manson
-
- * binutils-all/objcopy.exp(strip_executable): Make a new copy of
- the executable being tested.
-
-Mon Sep 15 21:25:20 1997 Bob Manson
-
- * binutils-all/objcopy.exp: Compile the executables to be tested
- on the target with a status wrapper (as necessary).
-
- * binutils-all/ar.exp: If testing on a remote host, don't bother
- looking on the local host for the program being tested. Use the
- correct filenames on the remote host.
-
- * binutils-all/nm.exp: Ditto.
-
- * binutils-all/size.exp: Ditto.
-
- * binutils-all/objdump.exp: Ditto.
- (cpus_expected): Add the target CPU to the regexp of CPUs to be
- expected, if it's not already there.
-
-Thu Aug 28 09:57:27 1997 Doug Evans
-
- * binutils-all/objdump.exp (cpus_expected): Add arc.
-
-Tue Aug 5 00:03:20 1997 Ian Lance Taylor
-
- * config/default.exp: Look for nm-new and strip-new.
-
-Tue Jun 3 17:12:54 1997 Bob Manson
-
- * config/default.exp: Remove expect_before statement.
-
- * binutils-all/objcopy.exp: Don't use global exec_output variable;
- the output is returned from remote_load instead.
-
-Mon May 12 22:14:20 1997 Bob Manson
-
- * binutils-all/objcopy.exp(strip_test): Tests that
- fail to compile are untested, not unresolved.
- (copy_setup): Ditto.
-
- * lib/utils-lib.exp(default_binutils_assemble): Call
- target_assemble instead of target_compile.
-
-Wed Apr 30 20:37:51 1997 Bob Manson
-
- Changes to support multilib and remote hosted testing, along with
- general cleanups and simplifications.
-
- * lib/utils-lib.exp(binutil_version): Use remote_exec.
- (default_binutils_run): Ditto.
- (default_binutils_assemble): Remove first argument; call
- target_compile to actually do the assembly.
- (default_binutils_compile,default_binutils_remove,prune_warnings):
- Delete.
-
- * config/default.exp: Remove AS and ASFLAGS.
- (binutils_compile,binutils_remove): Delete.
- (binutils_assemble): Remove first argument.
-
- * binutils-all/ar.exp: See if we're running the tests on
- a remote host, and download/upload files as appropriate.
- Replace calls to binutils_remove with remote_file. Replace
- calls to binutils_compile with target_compile. Remove initial
- argument to binutils_assemble. Use remote_load to execute
- programs on the target.
- * binutils-all/nm.exp: Ditto.
- * binutils-all/objcopy.exp: Ditto.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/size.exp: Ditto.
-
-Mon Apr 14 12:36:41 1997 Ian Lance Taylor
-
- * binutils-all/ar.exp (long_filenames): Check for a file system
- with a 14 character file name length limit.
-
-Tue Apr 1 09:52:15 1997 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Handle d10v.
-
-Fri Feb 7 16:45:34 1997 Bob Manson
-
- * binutils-all/ar.exp: Use prune_warnings instead of
- prune_system_crud.
- * binutils-all/objcopy.exp: Ditto.
-
-Wed Jan 29 00:16:43 1997 Bob Manson
-
- * binutils-all/nm.exp: Use / between $srcdir and $subdir.
- * binutils-all/objcopy.exp: Ditto.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/size.exp: Ditto.
- * binutils-all/hppa/objdump.exp: Ditto.
-
-
-Wed Oct 16 22:57:59 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Add mn10200 and mn10300 to expected
- cpus list.
-
-Tue Oct 1 15:06:55 1996 Ian Lance Taylor
-
- * lib/utils-lib.exp (binutil_version): Fix for current version
- printing.
-
-Sun Aug 4 22:25:40 1996 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Fix end of line matching in srec tests
- to work with TCL 7.5.
-
-Sat Jun 29 12:51:30 1996 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Simple copy test works for i960 b.out
- targets.
-
-Mon Jun 24 14:33:04 1996 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: On OSF/1, the simple copy test will
- succeed with gas, and fail with /bin/as, so mark it as an expected
- failure only if it fails.
-
-Tue Mar 26 16:55:08 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: No longer expect adjust-section-vma
- test to fail for hppa*-*-proelf*.
-
-Mon Mar 11 08:25:14 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objdump.exp: Look for "$CODE$", not just "CODE".
-
-Wed Jan 31 11:55:13 1996 Jeffrey A Law (law@cygnus.com)
-
- * binutils-all/objcopy.exp: Expect adjust-section-vma tests to
- fail for hppa*-*-proelf* targets.
-
-Thu Jan 25 13:53:04 1996 Ian Lance Taylor
-
- * binutils-all/objdump.exp: Update for objdump -h format change.
- * binutils-all/objcopy.exp: Likewise.
-
-Mon Jan 15 18:14:14 1996 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Use the lma, not the vma, when testing
- address adjustments.
-
-Fri Dec 15 16:31:55 1995 Ian Lance Taylor
-
- * binutils-all/objdump.exp: Update objdump -i test for current
- objdump output.
-
-Mon Nov 27 15:15:09 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Correct fail calls to always use the
- same string as the pass call.
-
-Wed Nov 22 13:18:58 1995 Ian Lance Taylor
-
- * lib/utils-lib.exp (prune_system_crud): Discard -g -O warnings
- from native compilers on OSF/1 and SunOS.
-
-Fri Nov 17 10:36:09 1995 Ian Lance Taylor
-
- * lib/utils-lib.exp (default_binutils_compiler: Change error
- message to say compilation rather than assembly.
-
-Wed Nov 15 18:34:42 1995 Ken Raeburn
-
- * binutils-all/objcopy.exp: Simple copy test does appear to work
- on i*86-svr4.
-
-Wed Nov 15 12:19:28 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: If assembly fails, call unresolved.
- Test running objcopy and strip on a final executable.
- * binutils-all/testprog.c: New file.
- * config/default.exp (STRIP, STRIPFLAGS): Define.
- (binutils_compile): New procedure.
- * lib/utils-lib.exp (default_binutils_compile): New procedure.
-
-Fri Nov 3 13:22:33 1995 Ian Lance Taylor
-
- * lib/utils-lib.exp (default_binutils_run): Don't use verbose
- -log, reverting part of Oct 2 change.
-
-Wed Nov 1 15:09:57 1995 Manfred Hollstein KS/EF4A 60/1F/110 #40283
-
- * binutils-all/objcopy.exp: Add setup_xfails for
- m68*-motorola-sysv* and m88*-motorola-sysv*.
-
-Wed Oct 4 14:38:31 1995 Ian Lance Taylor
-
- * binutils-all/nm.exp: Add setup_xfails for XCOFF.
-
-Mon Oct 2 12:41:48 1995 Ian Lance Taylor
-
- * binutils-all/ar.exp: New file.
- * binutils-all/bintest.s: Make text_symbol and data_symbol global.
- Add new static symbols static_text_symbol and static_data_symbol.
- * binutils-all/nm.exp: Adjust accordingly.
- * config/default.exp (AR): Set if not set.
- (binutils_remove): New procedure.
- * lib/utils-lib.exp (default_binutils_run): Call
- prune_system_crud on program output. Use verbose -log instead of
- both verbose and send_log.
- (default_binutils_remove): New procedure.
-
- * lib/utils-lib.exp (default_binutils_assemble): Call
- prune_system_crud on assembler output.
-
-Tue Sep 26 14:07:05 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfails for simple copy test
- for i386 COFF targets.
-
-Wed Sep 13 13:20:21 1995 Ian Lance Taylor
-
- * lib/utils-lib.exp (prune_system_crud): Define if not defined.
- * binutils-all/objcopy.exp: Call prune_system_crud on cmp output.
-
-Sat Aug 19 17:38:06 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add xfail for i*86-*-aout* for simple
- copy test.
-
-Wed Aug 16 16:52:53 1995 Ian Lance Taylor
-
- * binutils-all/nm.exp: Add setup_xfail for mips*-sony-bsd* for
- tests which fail on ECOFF targets.
-
- * binutils-all/objcopy.exp: Change i*86-*-linux xfail for simple
- copy test to check for i*86-*-linuxaout* instead.
-
-Tue Aug 8 17:48:37 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for a29k-*-vxworks*
- for simple copy test.
-
-Tue Jul 25 11:57:12 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Change setup_xfail for simple copy
- test from i960-*-vxworks5.1 to i960-*-vxworks*.
-
-Mon Jul 10 12:25:46 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for z8*-*-coff for
- simple copy test.
- * binutils-all/objdump.exp (cpus_expected): Add z8001 and z8002.
-
-Sun May 21 20:32:53 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-all/hppa/objdump.exp (addendbug): Handle PA ELF targets
- too.
- * binutils-all/objcopy.exp (simple copy): Don't expect PA ELF
- targets to fail.
-
-Tue Apr 4 14:52:08 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-all/hppa: Renamed from binutils-hppa.
-
-Wed Mar 29 12:02:43 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for h8500-*-hms and h8500-*-coff.
-
-Tue Mar 28 11:18:28 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for m68*-ericsson-ose and m88*-*-coff.
-
-Mon Mar 27 11:27:31 1995 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Add setup_xfail for simple copy test
- for m68*-*-vxworks*.
-
-Fri Mar 24 11:44:25 1995 Ian Lance Taylor
-
- * binutils-hppa/objdump.exp: Correct hppa*-*-* check.
-
-Tue Mar 21 10:48:45 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * binutils-hppa/addendbug.s: New testcase.
- * binutils-hppa/objdump.exp: Run it.
-
-Mon Mar 20 11:31:05 1995 Ian Lance Taylor
-
- * lib/utils-lib.exp (default_binutils_run): Quote any dollar signs
- in progargs before passing it to exec.
-
-Fri Mar 17 16:39:31 1995 Jeff Law (law@snake.cs.utah.edu)
-
- * config/hppa.sed: Sed script to transform bintest.s into proper
- PA assembly code.
- * binutils-all/nm.exp: Enable these tests on the PA.
- * binutils-all/objcopy.exp: Enable these tests on the PA. Expect
- simple copy to fail.
- * binutils-all/objdump.exp: Enable these tests on the PA. Handle
- "CODE" as a section name.
- * binutils-all/size.exp: Enable these tests on the PA.
- * lib/utils-lib.exp (default_binutils_assemble): For "hppa*-*-*",
- run the assembly through a sed script before passing it to the
- assembler.
-
-Wed Mar 15 16:47:13 1995 Ian Lance Taylor
-
- * binutils-all/objdump.exp: Force section sizes to be interpreted
- in hex. Change objdump -h failure mode to always use the same
- string.
-
-Thu Jan 5 13:01:43 1995 Ian Lance Taylor
-
- * binutils-all/nm.exp: Just check for irix4*, rather than
- irix\[0-4\]*, to avoid DejaGnu bug.
-
-Thu Dec 15 19:35:31 1994 Ken Raeburn
-
- * binutils-all/objcopy.exp: Expect simple-objcopy test to fail
- for various other targets for which gas doesn't use bfd: sh-hms,
- m68k-hpux, m68k-sunos, m68k-coff, i386-linux, a29k-udi, a29k-coff,
- i960-vxworks5.1, i960-coff, h8300-hms, h8300-coff.
-
-Wed Dec 14 15:54:46 1994 Ken Raeburn
-
- * binutils-all/size.exp: Skip tests requiring bintest.o on hppa,
- since it (correctly) generates syntax errors on that platform.
- * binutils-all/objdump.exp: Ditto.
- * binutils-all/nm.exp: Ditto.
- * binutils-all/objcopy.exp: Ditto. Also, move setup_xfail for
- sh-coff to branch where objcopy execution produced no error
- messages. Expect failure for hp300 also.
-
-Thu Dec 8 14:36:15 1994 Ken Raeburn
-
- * binutils-all/objdump.exp (cpus_expected): New variable, taken
- from objdump -i test, added ns32k and powerpc, sorted.
- (objdump -i, -f tests): Use $cpus_expected.
-
- * binutils-all/objcopy.exp: For simple-copy test, expect failure
- for sh-coff.
-
-Tue Oct 25 16:00:14 1994 Ian Lance Taylor
-
- * binutils-all/objcopy.exp: Adjust --adjust-section-vma tests for
- new S-record section handling.
-
-Tue Oct 18 11:18:21 1994 Ian Lance Taylor
-
- * binutils-all/nm.exp: nm with no arguments and nm -P do not work
- as expected on ECOFF targets; add calls to setup_xfail.
-
- * binutils-all/objcopy.exp: New file.
- * config/default.exp: Initialize OBJCOPY and OBJCOPYFLAGS.
-
-Fri Oct 14 14:46:22 1994 Ian Lance Taylor
-
- Rewrite testsuite.
- * configure.in, Makefile.in: Remove.
- * binutils-all/configure.in, binutils-all/Makefile.in: Remove.
- * binutils-all/bintest.c: Remove.
- * binutils-all/bintest.s: New file.
- * binutils-all/nm.exp, binutils-all/objdump.exp: Rewrite.
- * binutils-all/size.exp: Rewrite.
- * config/default.exp: Load utils-lib.exp. Set AS and ASFLAGS.
- Don't go up one directory from $base_dir. Create tmpdir.
- (binutils_run, binutils-assemble): New procedures.
- * config/unix.exp: Remove.
- * config/mt-a29k-udi, config/mt-i386-aout: Remove.
- * config/mt-i960-nindy, config/mt-lynx, config/mt-m68k: Remove.
- * config/mt-mips-ecoff, config/mt-slite: Remove.
- * config/mt-sparc-aout, config/mt-vxworks: Remove.
- * lib/utils-lib.exp (binutil_version): Don't redirect standard
- input when getting version. Don't unset errorInfo.
- (default_binutils_run): New procedure.
- (default_binutils_assemble): New procedure.
-
-Thu Sep 29 12:45:39 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * VMS does not permit `.' in directory names: renamed binutils.all
- to binutils-all.
- * configure.in (configdirs): Change binutils.all to binutils-all.
-
-Fri Sep 23 16:01:14 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * configure.in: Use mt-m68k for m68k*-*-aout* and m68k*-*-coff*,
- not for m68k-*-*.
-
-Fri Sep 23 13:54:50 1994 Ken Raeburn
-
- * binutils.all/objdump.exp: Added ARM to list of CPU types.
-
-Thu Sep 22 11:04:50 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * binutils.all/objdump.exp: Update for new usage message.
- * binutils.all/size.exp: Use a double backslash in the string to
- get a single backslash to the regexp matcher. Accept $TEXT$,
- $DATA$ and $BSS$ as well as .text, .data and .bss, for HP/UX.
-
-Fri Sep 2 12:53:10 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * config/unix.exp: If nm.new does not exist, use [transform nm].
- * config/default.exp: Likewise.
-
-Wed Aug 24 12:41:37 1994 Ian Lance Taylor (ian@sanguine.cygnus.com)
-
- * configure.in, binutils.all/configure.in: Change i386 to
- i[345]86.
-
-Tue Jul 19 15:23:53 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * config/mt-mips-ecoff: Add -Tidp.ld option.
-
-Thu Jun 30 12:41:55 1994 J.T. Conklin (jtc@phishhead.cygnus.com)
-
- * config/default.exp: Use nm.new, not nm, from newly built tree.
-
-Tue May 17 14:04:05 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * config/default.exp, config/unix.exp: Replace error
- proc calls with perror.
-
-Tue May 10 11:20:54 1994 Stan Shebs (shebs@andros.cygnus.com)
-
- * configure.in (sparclite): Match on sparclite*-*-*.
-
-Wed Apr 13 18:25:19 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * config/unix.exp: Use nm.new, not nm, from newly built tree.
-
- * binutils.all/objdump.exp: Add more wildcards to list of
- single-letter options in pattern for usage message.
-
- * binutils.all/nm.exp: Deleted debug-symbols test, since it only
- works for a.out/stabs systems. Fixed regexps to make underscores
- optional, since some C compilers don't prepend them. Deleted
- check for foo.o symbol, since again some systems don't generate
- it.
-
-Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com)
-
- * Makefile.in (check): Set TCL_LIBRARY for runtest.
-
-Mon Feb 14 19:34:03 1994 Rob Savoye (rob@darkstar.cygnus.com)
-
- * Makefile.in: Use new config features of DejaGnu in site.exp
- file. "Make check" should now work for all crosses.
-
-Fri Jan 28 18:00:29 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * binutils.all/objdump.exp: In usage message, accept
- "section-name" as well as "section_name".
-
-Mon Jan 17 16:57:02 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
-
- * binutils.all/objdump.exp: Trim list of format names expected,
- and accept any known CPU type.
-
-Thu Dec 2 20:50:24 1993 Rob Savoye (rob@darkstar.cygnus.com)
-
- * Makefile.in: Remove some stuff from the site.exp file.
- * config/unix.exp: Add global before seeing if the variables for
- nm, objdump, and size exist.
-
-Wed Nov 3 11:12:32 1993 Rob Savoye (rob@darkstar.cygnus.com)
-
- * config/udi.exp,unix.exp: Transform tool name.
- * binutils.all/*.exp: Clear errorInfo after exec.
-
-Fri Jul 2 12:41:20 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * binutils.all/*.exp: Use -- for long arguments rather than +.
-
-Fri Jun 4 10:52:29 1993 david d `zoo' zuhn (zoo@cirdan.cygnus.com)
-
- * configure.in: change srctrigger to Makefile.in
-
-Wed May 26 17:27:46 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * Makefile.in (FLAGS_TO_PASS): Pass down CC and CFLAGS.
-
-Fri May 7 13:58:44 1993 Ian Lance Taylor (ian@cygnus.com)
-
- * binutils.all/objdump.exp: Update for new usage message.
-
-Mon Apr 19 14:08:52 1993 Rob Savoye (rob@darkstar.cygnus.com)
-
- * binutils.all/*.exp: Use the new util_test proc.
- * Makefile.in: Create a local site.exp file with config info.
-
-Thu Mar 25 05:38:47 1993 Ken Raeburn (raeburn@kr-pc.cygnus.com)
-
- * nm.all/configure.in (srcname): Delete extra quote.
-
-Mon Feb 22 07:54:03 1993 Mike Werner (mtw@poseidon.cygnus.com)
-
- * binutils/testsuite: made modifications to testcases, etc., to allow
- them to work properly given the reorganization of deja-gnu and the
- relocation of the testcases from deja-gnu to a "tool" subdirectory.
-
-Sun Feb 21 10:55:55 1993 Mike Werner (mtw@poseidon.cygnus.com)
-
- * binutils/testsuite: Initial creation of binutils/testsuite.
- Migrated dejagnu testcases and support files for testing nm to
- binutils/testsuite from deja-gnu. These files were moved "as is"
- with no modifications. This migration is part of a major overhaul
- of dejagnu. The modifications to these testcases, etc., which
- will allow them to work with the new version of dejagnu will be
- made in a future update.
Index: config/default.exp
===================================================================
--- config/default.exp (revision 156)
+++ config/default.exp (nonexistent)
@@ -1,121 +0,0 @@
-# Copyright 1993, 1994, 1995, 1997, 1999, 2001, 2002, 2004, 2005, 2007
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-dejagnu@prep.ai.mit.edu
-
-# This file was written by Rob Savoye. (rob@cygnus.com)
-
-load_lib utils-lib.exp
-
-if ![info exists NM] then {
- set NM [findfile $base_dir/nm-new $base_dir/nm-new [transform nm]]
-}
-if ![info exists NMFLAGS] then {
- set NMFLAGS ""
-}
-if ![info exists SIZE] then {
- set SIZE [findfile $base_dir/size]
-}
-if ![info exists SIZEFLAGS] then {
- set SIZEFLAGS ""
-}
-if ![info exists OBJDUMP] then {
- set OBJDUMP [findfile $base_dir/objdump]
-}
-if ![info exists OBJDUMPFLAGS] then {
- set OBJDUMPFLAGS ""
-}
-if ![info exists OBJCOPY] then {
- set OBJCOPY [findfile $base_dir/objcopy]
-}
-if ![info exists OBJCOPYFLAGS] then {
- set OBJCOPYFLAGS ""
-}
-if ![info exists AR] then {
- set AR [findfile $base_dir/ar]
-}
-if ![info exists STRIP] then {
- set STRIP [findfile $base_dir/strip-new $base_dir/strip-new [transform strip]]
-}
-if ![info exists STRIPFLAGS] then {
- set STRIPFLAGS ""
-}
-if ![info exists READELF] then {
- set READELF [findfile $base_dir/readelf]
-}
-if ![info exists READELFFLAGS] then {
- set READELFFLAGS ""
-}
-if ![info exists WINDRES] then {
- set WINDRES [findfile $base_dir/windres]
-}
-if ![info exists DLLTOOL] then {
- set DLLTOOL [findfile $base_dir/dlltool]
-}
-
-if ![file isdirectory tmpdir] {catch "exec mkdir tmpdir" status}
-
-# Make a copy from tmpdir/gas/as and tmpdir/gas/ld to the assembler
-# and linker in the build tree, so that we can use a -B option to gcc
-# to force it to use the newly built assembler/linker.
-if {![file isdirectory tmpdir/gas]} {catch "exec mkdir tmpdir/gas" status}
-
-proc link_or_copy { src dst } {
- if ![catch "exec ln -sf ../../../$src tmpdir/gas/$dst" status] then {return 0}
- if ![catch "exec ln -f ../$src tmpdir/gas/$dst" status] then {return 0}
- catch "exec cp -fpu ../$src tmpdir/gas/$dst" status
-}
-
-if {[file isfile gas/as-new[exe_ext]]} then {
- link_or_copy gas/as-new[exe_ext] as[exe_ext]
-} else {
- # For non-Windows hosts there may be an executable
- # without a .exe suffix, so try copying that instead.
- link_or_copy gas/as-new as[exe_ext]
-}
-# This may not be needed any more...
-if {[file isfile ld/ld-new[exe_ext]]} then {
- link_or_copy ld/ld-new[exe_ext] ld[exe_ext]
-} else {
- link_or_copy ld/ld-new ld[exe_ext]
-}
-if {[file isfile tmpdir/gas/as[exe_ext]]} then {
- set gcc_gas_flag "-B[pwd]/tmpdir/gas/"
- set dlltool_gas_flag "-S [pwd]/tmpdir/gas/as[exe_ext]"
-} else {
- # Testing an installed toolchain.
- set gcc_gas_flag ""
- set dlltool_gas_flag ""
-}
-
-#
-# binutils_run
-# run a program, returning the output
-# sets binutils_run_failed if the program does not exist
-#
-proc binutils_run { prog progargs } {
- default_binutils_run $prog $progargs
-}
-
-#
-# binutils_assemble
-# assemble a file
-#
-proc binutils_assemble { source object } {
- default_binutils_assemble $source $object
-}
Index: config/hppa.sed
===================================================================
--- config/hppa.sed (revision 156)
+++ config/hppa.sed (nonexistent)
@@ -1,4 +0,0 @@
-s/# Old OSF sed blows up if you have a sed command starting with "#"//
-s/# Avoid it by putting the comments within real sed commands.//
-s/# Fix the definition of common_symbol to be correct for the PA assebmlers.//
-s/ \.comm common_symbol,4/common_symbol .comm 4/
Index: lib/utils-lib.exp
===================================================================
--- lib/utils-lib.exp (revision 156)
+++ lib/utils-lib.exp (nonexistent)
@@ -1,673 +0,0 @@
-# Copyright 1993, 1994, 1995, 1996, 1997, 2000, 2001, 2003, 2004, 2006, 2007
-# Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-dejagnu@prep.ai.mit.edu
-
-# This file was written by Rob Savoye
-# and extended by Ian Lance Taylor
-
-proc binutil_version { prog } {
- if ![is_remote host] {
- set path [which $prog]
- if {$path == 0} then {
- perror "$prog can't be run, file not found."
- return ""
- }
- } else {
- set path $prog
- }
- set state [remote_exec host $prog --version]
- set tmp "[lindex $state 1]\n"
- # Should find a way to discard constant parts, keep whatever's
- # left, so the version string could be almost anything at all...
- regexp "\[^\n\]* (cygnus-|)(\[-0-9.a-zA-Z-\]+)\[\r\n\].*" "$tmp" version cyg number
- if ![info exists number] then {
- return "$path (no version number)\n"
- }
- return "$path $number\n"
-}
-
-#
-# default_binutils_run
-# run a program, returning the output
-# sets binutils_run_failed if the program does not exist
-#
-proc default_binutils_run { prog progargs } {
- global binutils_run_failed
- global host_triplet
-
- set binutils_run_failed 0
-
- if ![is_remote host] {
- if {[which $prog] == 0} then {
- perror "$prog does not exist"
- set binutils_run_failed 1
- return ""
- }
- }
-
- send_log "$prog $progargs\n"
- verbose "$prog $progargs"
-
- # Gotta quote dollar-signs because they get mangled by the
- # shell otherwise.
- regsub -all "\\$" "$progargs" "\\$" progargs
-
- set state [remote_exec host $prog $progargs]
- set exec_output [prune_warnings [lindex $state 1]]
- if {![string match "" $exec_output]} then {
- send_log "$exec_output\n"
- verbose "$exec_output"
- } else {
- if { [lindex $state 0] != 0 } {
- set exec_output "$prog exited with status [lindex $state 0]"
- send_log "$exec_output\n"
- verbose "$exec_output"
- }
- }
- return $exec_output
-}
-
-#
-# default_binutils_assemble
-# assemble a file
-#
-proc default_binutils_assemble { source object } {
- global srcdir
- global host_triplet
-
- # The HPPA assembler syntax is a little different than most, to make
- # the test source file assemble we need to run it through sed.
- #
- # This is a hack in that it won't scale well if other targets need
- # similar transformations to assemble. We'll generalize the hack
- # if/when other targets need similar handling.
- if { [istarget "hppa*-*-*"] && ![istarget "*-*-linux*" ] } then {
- set sed_file $srcdir/config/hppa.sed
- send_log "sed -f $sed_file < $source > asm.s\n"
- verbose "sed -f $sed_file < $source > asm.s"
- catch "exec sed -f $sed_file < $source > asm.s"
- set source asm.s
- }
-
- set exec_output [target_assemble $source $object ""]
- set exec_output [prune_warnings $exec_output]
-
- if [string match "" $exec_output] {
- return 1
- } else {
- send_log "$exec_output\n"
- verbose "$exec_output"
- perror "$source: assembly failed"
- return 0
- }
-}
-
-#
-# is_elf_format
-# true if the object format is known to be ELF
-#
-proc is_elf_format {} {
- if { ![istarget *-*-sysv4*] \
- && ![istarget *-*-unixware*] \
- && ![istarget *-*-elf*] \
- && ![istarget *-*-eabi*] \
- && ![istarget hppa*64*-*-hpux*] \
- && ![istarget ia64-*-hpux*] \
- && ![istarget *-*-linux*] \
- && ![istarget *-*-irix5*] \
- && ![istarget *-*-irix6*] \
- && ![istarget *-*-netbsd*] \
- && ![istarget *-*-solaris2*] } {
- return 0
- }
-
- if { [istarget *-*-linux*aout*] \
- || [istarget *-*-linux*oldld*] } {
- return 0
- }
-
- if { ![istarget *-*-netbsdelf*] \
- && ([istarget *-*-netbsd*aout*] \
- || [istarget *-*-netbsdpe*] \
- || [istarget arm*-*-netbsd*] \
- || [istarget sparc-*-netbsd*] \
- || [istarget i*86-*-netbsd*] \
- || [istarget m68*-*-netbsd*] \
- || [istarget vax-*-netbsd*] \
- || [istarget ns32k-*-netbsd*]) } {
- return 0
- }
- return 1
-}
-
-#
-# exe_ext
-# Returns target executable extension, if any.
-#
-proc exe_ext {} {
- if { [istarget *-*-mingw*] || [istarget *-*-cygwin*] } {
- return ".exe"
- } else {
- return ""
- }
-}
-
-# Copied and modified from gas.
-
-# run_dump_test FILE (optional:) EXTRA_OPTIONS
-#
-# Assemble a .s file, then run some utility on it and check the output.
-#
-# There should be an assembly language file named FILE.s in the test
-# suite directory, and a pattern file called FILE.d. `run_dump_test'
-# will assemble FILE.s, run some tool like `objdump', `objcopy', or
-# `nm' on the .o file to produce textual output, and then analyze that
-# with regexps. The FILE.d file specifies what program to run, and
-# what to expect in its output.
-#
-# The FILE.d file begins with zero or more option lines, which specify
-# flags to pass to the assembler, the program to run to dump the
-# assembler's output, and the options it wants. The option lines have
-# the syntax:
-#
-# # OPTION: VALUE
-#
-# OPTION is the name of some option, like "name" or "objdump", and
-# VALUE is OPTION's value. The valid options are described below.
-# Whitespace is ignored everywhere, except within VALUE. The option
-# list ends with the first line that doesn't match the above syntax.
-# However, a line within the options that begins with a #, but doesn't
-# have a recognizable option name followed by a colon, is considered a
-# comment and entirely ignored.
-#
-# The optional EXTRA_OPTIONS argument to `run_dump_test' is a list of
-# two-element lists. The first element of each is an option name, and
-# the second additional arguments to be added on to the end of the
-# option list as given in FILE.d. (If omitted, no additional options
-# are added.)
-#
-# The interesting options are:
-#
-# name: TEST-NAME
-# The name of this test, passed to DejaGNU's `pass' and `fail'
-# commands. If omitted, this defaults to FILE, the root of the
-# .s and .d files' names.
-#
-# as: FLAGS
-# When assembling FILE.s, pass FLAGS to the assembler.
-#
-# PROG: PROGRAM-NAME
-# The name of the program to run to analyze the .o file produced
-# by the assembler. This can be omitted; run_dump_test will guess
-# which program to run by seeing which of the flags options below
-# is present.
-#
-# objdump: FLAGS
-# nm: FLAGS
-# objcopy: FLAGS
-# Use the specified program to analyze the .o file, and pass it
-# FLAGS, in addition to the .o file name. Note that they are run
-# with LC_ALL=C in the environment to give consistent sorting
-# of symbols.
-#
-# source: SOURCE
-# Assemble the file SOURCE.s. If omitted, this defaults to FILE.s.
-# This is useful if several .d files want to share a .s file.
-#
-# target: GLOBS...
-# Run this test only on a specified list of targets. More precisely,
-# each glob in the space-separated list is passed to "istarget"; if
-# it evaluates true for any of them, the test will be run, otherwise
-# it will be marked unsupported.
-#
-# not-target: GLOBS...
-# Do not run this test on a specified list of targets. Again,
-# the each glob in the space-separated list is passed to
-# "istarget", and the test is run if it evaluates *false* for
-# *all* of them. Otherwise it will be marked unsupported.
-#
-# skip: GLOBS...
-# not-skip: GLOBS...
-# These are exactly the same as "not-target" and "target",
-# respectively, except that they do nothing at all if the check
-# fails. They should only be used in groups, to construct a single
-# test which is run on all targets but with variant options or
-# expected output on some targets. (For example, see
-# gas/arm/inst.d and gas/arm/wince_inst.d.)
-#
-# error: REGEX
-# An error with message matching REGEX must be emitted for the test
-# to pass. The PROG, objdump, nm and objcopy options have no
-# meaning and need not supplied if this is present.
-#
-# warning: REGEX
-# Expect a gas warning matching REGEX. It is an error to issue
-# both "error" and "warning".
-#
-# stderr: FILE
-# FILE contains regexp lines to be matched against the diagnostic
-# output of the assembler. This does not preclude the use of
-# PROG, nm, objdump, or objcopy.
-#
-# error-output: FILE
-# Means the same as 'stderr', but also indicates that the assembler
-# is expected to exit unsuccessfully (therefore PROG, objdump, nm,
-# and objcopy have no meaning and should not be supplied).
-#
-# Each option may occur at most once.
-#
-# After the option lines come regexp lines. `run_dump_test' calls
-# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
-
-proc run_dump_test { name {extra_options {}} } {
- global subdir srcdir
- global OBJDUMP NM OBJCOPY READELF STRIP
- global OBJDUMPFLAGS NMFLAGS OBJCOPYFLAGS READELFFLAGS STRIPFLAGS
- global host_triplet
- global env
- global copyfile
- global tempfile
-
- if [string match "*/*" $name] {
- set file $name
- set name [file tail $name]
- } else {
- set file "$srcdir/$subdir/$name"
- }
- set opt_array [slurp_options "${file}.d"]
- if { $opt_array == -1 } {
- perror "error reading options from $file.d"
- unresolved $subdir/$name
- return
- }
- set opts(addr2line) {}
- set opts(ar) {}
- set opts(nm) {}
- set opts(objcopy) {}
- set opts(objdump) {}
- set opts(strip) {}
- set opts(ranlib) {}
- set opts(readelf) {}
- set opts(size) {}
- set opts(strings) {}
- set opts(name) {}
- set opts(PROG) {}
- set opts(DUMPPROG) {}
- set opts(source) {}
- set opts(target) {}
- set opts(not-target) {}
- set opts(skip) {}
- set opts(not-skip) {}
-
- foreach i $opt_array {
- set opt_name [lindex $i 0]
- set opt_val [lindex $i 1]
- if ![info exists opts($opt_name)] {
- perror "unknown option $opt_name in file $file.d"
- unresolved $subdir/$name
- return
- }
- if [string length $opts($opt_name)] {
- perror "option $opt_name multiply set in $file.d"
- unresolved $subdir/$name
- return
- }
- set opts($opt_name) $opt_val
- }
-
- foreach i $extra_options {
- set opt_name [lindex $i 0]
- set opt_val [lindex $i 1]
- if ![info exists opts($opt_name)] {
- perror "unknown option $opt_name given in extra_opts"
- unresolved $subdir/$name
- return
- }
- # add extra option to end of existing option, adding space
- # if necessary.
- if [string length $opts($opt_name)] {
- append opts($opt_name) " "
- }
- append opts($opt_name) $opt_val
- }
-
- if { $opts(name) == "" } {
- set testname "$subdir/$name"
- } else {
- set testname $opts(name)
- }
- verbose "Testing $testname"
-
- if {$opts(PROG) == ""} {
- perror "program isn't set in $file.d"
- unresolved $testname
- return
- }
-
- set destopt ""
- switch -- $opts(PROG) {
- ar { set program ar }
- objcopy { set program objcopy }
- ranlib { set program ranlib }
- strip {
- set program strip
- set destopt "-o"
- }
- strings { set program strings }
- default {
- perror "unrecognized program option $opts(PROG) in $file.d"
- unresolved $testname
- return }
- }
-
- set dumpprogram ""
- if { $opts(DUMPPROG) != "" } {
- switch -- $opts(DUMPPROG) {
- addr2line { set dumpprogram addr2line }
- nm { set dumpprogram nm }
- objdump { set dumpprogram objdump }
- readelf { set dumpprogram readelf }
- size { set dumpprogram size }
- default {
- perror "unrecognized dump program option $opts(DUMPPROG) in $file.d"
- unresolved $testname
- return }
- }
- } else {
- # Guess which program to run, by seeing which option was specified.
- foreach p {objdump nm readelf} {
- if {$opts($p) != ""} {
- if {$dumpprogram != ""} {
- perror "ambiguous dump program in $file.d"
- unresolved $testname
- return
- } else {
- set dumpprogram $p
- }
- }
- }
- }
-
- # Handle skipping the test on specified targets.
- # You can have both skip/not-skip and target/not-target, but you can't
- # have both skip and not-skip, or target and not-target, in the same file.
- if { $opts(skip) != "" } then {
- if { $opts(not-skip) != "" } then {
- perror "$testname: mixing skip and not-skip directives is invalid"
- unresolved $testname
- return
- }
- foreach glob $opts(skip) {
- if {[istarget $glob]} { return }
- }
- }
- if { $opts(not-skip) != "" } then {
- set skip 1
- foreach glob $opts(not-skip) {
- if {[istarget $glob]} {
- set skip 0
- break
- }
- }
- if {$skip} { return }
- }
- if { $opts(target) != "" } then {
- if { $opts(not-target) != "" } then {
- perror "$testname: mixing target and not-target directives is invalid"
- unresolved $testname
- return
- }
- set skip 1
- foreach glob $opts(target) {
- if {[istarget $glob]} {
- set skip 0
- break
- }
- }
- if {$skip} {
- unsupported $testname
- return
- }
- }
- if { $opts(not-target) != "" } then {
- foreach glob $opts(not-target) {
- if {[istarget $glob]} {
- unsupported $testname
- return
- }
- }
- }
-
- if { $opts(source) == "" } {
- set srcfile ${file}.s
- } else {
- set srcfile $srcdir/$subdir/$opts(source)
- }
-
- set exec_output [binutils_assemble ${srcfile} $tempfile]
- if [string match "" $exec_output] then {
- send_log "$exec_output\n"
- verbose "$exec_output"
- fail $testname
- return
- }
-
- set progopts1 $opts($program)
- eval set progopts \$[string toupper $program]FLAGS
- eval set binary \$[string toupper $program]
-
- set exec_output [binutils_run $binary "$progopts $progopts1 $tempfile $destopt ${copyfile}.o"]
- if ![string match "" $exec_output] {
- send_log "$exec_output\n"
- verbose "$exec_output"
- fail $testname
- return
- }
-
- set progopts1 $opts($dumpprogram)
- eval set progopts \$[string toupper $dumpprogram]FLAGS
- eval set binary \$[string toupper $dumpprogram]
-
- if { ![is_remote host] && [which $binary] == 0 } {
- untested $testname
- return
- }
-
- verbose "running $binary $progopts $progopts1" 3
-
- set cmd "$binary $progopts $progopts1 ${copyfile}.o"
-
- # Ensure consistent sorting of symbols
- if {[info exists env(LC_ALL)]} {
- set old_lc_all $env(LC_ALL)
- }
- set env(LC_ALL) "C"
- send_log "$cmd\n"
- set comp_output [remote_exec host $cmd "" "/dev/null" "tmpdir/dump.out"]
- if {[info exists old_lc_all]} {
- set env(LC_ALL) $old_lc_all
- } else {
- unset env(LC_ALL)
- }
- if { [lindex $comp_output 0] != 0 } then {
- send_log "$comp_output\n"
- fail $testname
- return
- }
- set comp_output [prune_warnings [lindex $comp_output 1]]
- if ![string match "" $comp_output] then {
- send_log "$comp_output\n"
- fail $testname
- return
- }
-
- verbose_eval {[file_contents "tmpdir/dump.out"]} 3
- if { [regexp_diff "tmpdir/dump.out" "${file}.d"] } then {
- fail $testname
- verbose "output is [file_contents "tmpdir/dump.out"]" 2
- return
- }
-
- pass $testname
-}
-
-proc slurp_options { file } {
- if [catch { set f [open $file r] } x] {
- #perror "couldn't open `$file': $x"
- perror "$x"
- return -1
- }
- set opt_array {}
- # whitespace expression
- set ws {[ ]*}
- set nws {[^ ]*}
- # whitespace is ignored anywhere except within the options list;
- # option names are alphabetic plus dash
- set pat "^#${ws}(\[a-zA-Z-\]*)$ws:${ws}(.*)$ws\$"
- while { [gets $f line] != -1 } {
- set line [string trim $line]
- # Whitespace here is space-tab.
- if [regexp $pat $line xxx opt_name opt_val] {
- # match!
- lappend opt_array [list $opt_name $opt_val]
- } elseif {![regexp "^#" $line ]} {
- break
- }
- }
- close $f
- return $opt_array
-}
-
-# regexp_diff, based on simple_diff taken from ld test suite
-# compares two files line-by-line
-# file1 contains strings, file2 contains regexps and #-comments
-# blank lines are ignored in either file
-# returns non-zero if differences exist
-#
-proc regexp_diff { file_1 file_2 } {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- perror "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- perror "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- set diff_pass 1
- break
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- verbose "regexp_diff match failure\n" 3
- set differences 1
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
-proc file_contents { filename } {
- set file [open $filename r]
- set contents [read $file]
- close $file
- return $contents
-}
-
-proc verbose_eval { expr { level 1 } } {
- global verbose
- if $verbose>$level then { eval verbose "$expr" $level }
-}
Index: ChangeLog
===================================================================
--- ChangeLog (revision 156)
+++ ChangeLog (nonexistent)
@@ -1,415 +0,0 @@
-2008-03-27 Cary Coutant
-
- * binutils-all/ar.exp: Add thin archive tests.
-
-2008-02-26 Joseph Myers
-
- * config/default.exp (gcc_gas_flag, dlltool_gas_flag): Define to
- empty for testing an installed toolchain.
-
-2008-02-04 Bob Wilson
-
- * binutils-all/objdump.exp (cpus_expected): Add xtensa.
-
-2007-10-26 Alan Modra
-
- * binutils-all/windres/windres.exp: Don't xfail.
-
-2007-10-16 Nick Clifton
-
- * binutils-all/readelf.ss: Accept COMMON in readelf's output.
- * binutils-all/readelf.ss-64: Likewise.
- * binutils-all/readelf.ss-mips: Likewise.
- * binutils-all/readelf.ss-tmips: Likewise.
-
-2007-08-30 Nick Clifton
-
- * binutils-all/dumptest.s: New test file.
- * binutils-all/readelf.exp: Add test of readelf's -p switch.
-
-2007-08-28 Mark Shinwell
- Joseph Myers
-
- * binutils-all/ar.exp (long_filenames): Delete temporary files on
- the host.
- * binutils-all/arm/objdump.exp: Only check "which $OBJDUMP" if
- host is local.
- * binutils-all/objcopy.exp: Use ${srecfile} to get the name of the
- srec file to be passed to binutils_run.
- (objcopy_test_readelf): Use remote_exec.
- * binutils-all/readelf.exp (readelf_find_size): Use remote_exec.
- (readelf_test): Likewise.
- (readelf_wi_test): Likewise.
- * lib/utils-lib.exp (run_dump_test): Only check "which $binary" if
- host is local. Use remote_exec. Use $tempfile not
- tmpdir/bintest.o.
-
-2007-08-09 Alan Modra
-
- * binutils-all/copy-2.d (not-target): Match *-*-*aout.
- * binutils-all/copy-3.d (not-target): Likewise.
- * binutils-all/objcopy.exp (objcopy_test): Remove extraneous
- setup_xfail.
- * windres/windres.exp: Return unsupported rather than fail if
- windows.h not found.
-
-2007-07-05 Nick Clifton
-
- * lib/utils-lib.exp: Update copyright notice to refer to GPLv3.
- * config/default.exp, binutils-all/ar.exp,
- binutils-all/dlltool.exp, binutils-all/nm.exp,
- binutils-all/objcopy.exp, binutils-all/arm/objdump.exp,
- binutils-all/hppa/objdump.exp, binutils-all/m68k/objdump.exp,
- binutils-all/vax/objdump.exp, binutils-all/windres/windres.exp,
- binutils-all/windres/msupdate: Likewise.
-
-2007-06-23 H.J. Lu
-
- * binutils-all/strip-3.d: Also strip .xtensa.info section.
-
-2007-05-24 Kai Tietz
-
- * binutils-all/windres/version_cat.rc: New.
- * binutils-all/windres/version_cat.rsd: New.
-
-2007-05-23 Kai Tietz
-
- * binutils-all/windres/html.rc: New.
- * binutils-all/windres/html.rsd: New.
- * binutils-all/windres/html1.hm: New.
- * binutils-all/windres/html2.hm: New.
- * binutils-all/windres/messagetable.rc: New.
- * binutils-all/windres/messagetable.rsd: New.
- * binutils-all/windres/MSG00001.bin: New.
- * binutils-all/windres/strtab2.rc: New.
- * binutils-all/windres/strtab2.rsd: New.
- * binutils-all/windres/version.rc: New.
- * binutils-all/windres/version.rsd: New.
- * binutils-all/windres/dialog.rsd: Fix expected results.
-
-2007-05-17 Joseph Myers
-
- * binutils-all/strip-3.d: Strip .pdr section.
-
-2007-05-15 Alan Modra
-
- * binutils-all/objcopy.exp: Only run needed-by-reloc test for ELF.
-
-2007-05-11 Alan Modra
-
- * binutils-all/needed-by-reloc.s: Use .long rather than .4byte.
-
-2007-05-08 Mark Shinwell
-
- * binutils-all/strip-3.d: Strip .ARM.attributes and .reginfo
- sections.
-
-2007-05-02 Alan Modra
-
- * binutils-all/objcopy.exp (copy_setup): Don't perror, use send_log.
- (copy_executable): Return early if test2 is blank.
- Return unsupported rather than unresolved if we can't run
- executables. Do test1 if we can compile.
-
-2007-04-24 Nathan Froyd
- Phil Edwards
-
- * binutils-all/objcopy.exp: Add test for stripping a symbol
- used in a relocation.
- * binutils-all/needed-by-reloc.s: New file.
-
-2007-04-20 Nathan Froyd
- Phil Edwards
- Thomas de Lellis
-
- * binutils-all/objcopy.exp: Add test for --reverse-bytes.
-
-2007-04-21 Richard Earnshaw
-
- * binutils-all/readelf.exp (regexp_diff): Delete.
-
-2007-04-20 Richard Earnshaw
-
- * binutils-all/arm/thumb2-cond.s: Allow for tab expansion by the pty.
- Rename the second test.
-
-2007-04-12 H.J. Lu
-
- PR binutils/4348
- * binutils-all/empty.s: New file.
- * binutils-all/strip-3.d: Likewise.
-
- * binutils-all/objcopy.exp: Run strip-3 for ELF target.
-
-2007-02-27 Nathan Sidwell
-
- * binutils-all/objcopy.exp: Skip for uclinux targets.
-
-2007-02-14 Nick Clifton
-
- * binutils-all/readelf.exp (readelf_wi_test): Fix unexpected
- output failure message.
-
-2007-01-08 Kai Tietz
-
- * copy-3.d: Renamed target x86_64-*-mingw64 to x86_64-*-mingw*
- * dlltool.exp: Dito
- * lang.rc: Dito
- * strtab1.rc: Dito
- * windres.exp: Dito
-
-2006-09-20 Kai Tietz
-
- * binutils-all/copy-3.d: Add support for target x86_64-pc-mingw64.
- * binutils-all/dlltool.exp: Likewise.
- * binutils-all/objcopy.exp: Likewise.
- * binutils-all/windres/windres.exp: Likewise.
- * binutils-all/windres/lang.rc: xfail it as long as there is no windows.h.
- * binutils-all/windres/strtab1.rc: Likewise.
- * lib/utils-lib.exp: Adjust executable prefix detection (as .exe).
-
-2006-09-14 H.J. Lu
-
- PR binutils/3181
- * binutils-all/objcopy.exp: Run strip-1 and strip-2 for ELF
- targets.
-
- * binutils-all/strip-1.d: New file.
- * binutils-all/strip-2.d: Likewise.
-
- * lib/utils-lib.exp (run_dump_test): Support strip.
-
-2006-08-15 Thiemo Seufer
- Nigel Stephens
- David Ung
-
- * binutils-all/readelf.exp (readelf_test): Handle mips*-sde-elf*.
-
-2006-06-24 Richard Sandiford
-
- * binutils-all/localize-hidden-1.d: Use objdump --syms instead
- of readelf.
-
-2006-06-23 Richard Sandiford
-
- * binutils-all/localize-hidden-1.s,
- * binutils-all/localize-hidden-1.d,
- * binutils-all/localize-hidden-2.s,
- * binutils-all/localize-hidden-2.d: New tests.
- * binutils-all/objcopy.exp: Run them.
-
-2006-06-06 Paul Brook
-
- * binutils-all/arm/objdump.exp: New file.
- * binutils-all/arm/thumb2-cond.s: New test.
-
-2006-05-03 H.J. Lu
-
- * binutils-all/copy-3.d: Fix a typo.
-
-2006-05-03 H.J. Lu
-
- * binutils-all/copy-3.d: New.
-
- * objcopy.exp: Run copy-3.
-
-2006-05-02 Dave Korn
-
- * binutils-all/copy-1.d (name): Correct spelling of 'setting'.
- * binutils-all/copy-1.d (name): Likewise.
-
-2006-05-02 Nick Clifton
-
- * binutils-all/copy-2.d: Change the name of the section whose
- flags are changed to "foo" so that the test will work with PE
- based targets. Skip this test for AOUT based targeted.
- * binutils-all/copytest.s: New file.
-
-2006-05-01 H.J. Lu
-
- * binutils-all/objcopy.exp: Run "copy-1" for ELF only.
-
-2006-05-01 Ben Elliston
-
- * binutils-all/objcopy.exp (objcopy_test_readelf): Remove stray ;
-
-2006-04-26 H.J. Lu
-
- PR binutils/2593
- * binutils-all/copy-1.d: New file.
- * binutils-all/copy-1.s: Likewise.
- * binutils-all/copy-2.d: Likewise.
-
- * binutils-all/objcopy.exp: Add run_dump_test "copy-1" and
- run_dump_test "copy-2".
-
- * lib/utils-lib.exp (run_dump_test): New.
- (slurp_options): Likewise.
- (regexp_diff): Likewise.
- (file_contents): Likewise.
- (verbose_eval): Likewise.
-
-2006-04-25 H.J. Lu
-
- PR binutils/2467
- * binutils-all/objcopy.exp (strip_test): Also test "strip -g"
- on archive.
-
-2006-04-10 H.J. Lu
-
- * lib/utils-lib.exp (default_binutils_run): Check exit status.
-
-2005-12-24 Ben Elliston
-
- * config/default.exp: Do not load the unneeded util-defs.exp.
-
-2005-11-15 Jan Beulich
-
- * config/default.exp (link_or_copy): New. Use it for setting
- up assembler and linker for the compiler to use.
-
-2005-10-20 H.J. Lu
-
- PR ld/251
- * binutils-all/group.s: New file.
-
- * binutils-all/objcopy.exp (objcopy_test_readelf): New
- procedure.
- Use it to test ELF group.
-
-2005-10-19 H.J. Lu
-
- PR ld/1487
- * binutils-all/objcopy.exp (objcopy_test): New procedure.
- Use it to test simple copy, ia64 link order and ELF unknown
- section type.
-
- * binutils-all/unknown.s: New file.
-
-2005-10-19 H.J. Lu
-
- PR binutils/1321
- * binutils-all/link-order.s: New.
-
- * binutils-all/objcopy.exp: Check ia64 link order.
-
-2005-10-11 Danny Smith
-
- * binutils-all/windres/escapex-2.rc: New file.
- * binutils-all/windres/escapex-2.rsd: Generate.
-
-2005-08-26 Christian Groessler
-
- * binutils-all/objcopy.exp: Don't setup_xfail "z8*-*".
-
-2005-08-18 Alan Modra
-
- * binutils-all/objcopy.exp: Remove a29k support.
- * binutils-all/objdump.exp: Likewise, alliant and convex too.
-
-2005-05-07 Nick Clifton
-
- * Update the address and phone number of the FSF organization in
- the GPL notices in the following files:
- binutils-all/ar.exp, binutils-all/dlltool.exp,
- binutils-all/nm.exp, binutils-all/objcopy.exp,
- binutils-all/objdump.exp, binutils-all/readelf.exp,
- binutils-all/size.exp, binutils-all/hppa/objdump.exp,
- binutils-all/m68k/objdump.exp, binutils-all/vax/objdump.exp,
- binutils-all/windres/msupdate, binutils-all/windres/windres.exp,
- config/default.exp, lib/utils-lib.exp
-
-2005-04-04 Jan-Benedict Glaw
-
- * binutils-all/vax/objdump.exp: Condense the two tests into one
- and add a "-M entry:" for the second label.
-
-2005-03-29 Jan-Benedict Glaw
-
- * binutils-all/vax: New directory.
- * binutils-all/vax/objdump.exp: New script. Test the -Mentry:
- switch added to the VAX disassembler.
- * binutils-all/vax/entrymask.s: New assembler source file.
-
-2005-03-08 Ben Elliston
-
- * config/default.exp: Remove send_user call for stray output.
-
-2005-01-04 Martin Koegler
-
- * binutils-all/testprog.c: Add prototype for printf() and make
- type of "string" array be "char" in order to avoid compile time
- warnings.
-
-2004-12-31 Alan Modra
-
- * binutils-all/readelf.ss: Allow for both .rel and .rela sections.
-
-2004-11-04 Hans-Peter Nilsson
-
- * binutils-all/objdump.exp (cpus_expected): Append cris.
-
-2004-10-28 H.J. Lu
-
- * binutils-all/dlltool.exp: Set XFAIL if $target_xfail is yes.
-
-2004-10-23 Aaron W. LaFramboise
-
- * binutils-all/alias.def: New file.
- * binutils-all/dlltool.exp: Two new -p tests.
- * config/default.exp (dlltool_gas_flag): New variable.
- Copy gas and lds executables into tmpdir/gas directory rather than
- making symlinks which might not be supported by the host OS.
- Attempt to handle the case where the host OS does not use the .exe
- extension but the target OS does.
- * lib/utils-lib.exp (exe_ext): New procedure.
-
-2004-07-12 Nick Clifton
-
- * binutils-all/dlltool.exp: Check that the -p switch is not
- rejected.
-
-2004-07-09 Andreas Schwab
-
- * binutils-all/m68k/movem.s: New file.
-
- * binutils-all/m68k/objdump.exp: New file.
-
-2004-05-15 Nick Clifton
-
- * binutils-all/readelf.ss: Allow for ARM mapping symbols.
-
-2004-05-12 Ben Elliston
-
- * binutils-all/ar.exp: Remove stray semicolons.
- * binutils-all/dlltool.exp: Likewise.
- * binutils-all/objcopy.exp: Likewise.
- * binutils-all/readelf.exp: Likewise.
- * binutils-all/windres/windres.exp: Likewise.
- * lib/utils-lib.exp: Likewise.
-
-2004-04-14 Richard Sandiford
-
- * binutils-all/readelf.ss-mips: Allow named section symbols.
-
-2004-03-30 Jakub Jelinek
-
- * binutils-all/objcopy.exp: Accept main as a data symbol as well.
-
-2004-02-27 Andreas Schwab
-
- * binutils-all/ar.exp (argument_parsing): New test.
-
-2004-02-20 Nathan Sidwell
-
- * binutils-all/objcopy.exp: Reorder arguments for POSIXLY_CORRECT
- systems.
-
-For older changes see ChangeLog-9303
-
-Local Variables:
-mode: change-log
-left-margin: 8
-fill-column: 74
-version-control: never
-End: