URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/gnu-stable/gcc-4.5.1/libstdc++-v3/po
- from Rev 816 to Rev 826
- ↔ Reverse comparison
Rev 816 → Rev 826
/Makefile.in
0,0 → 1,515
# Makefile.in generated by automake 1.11.1 from Makefile.am. |
# @configure_input@ |
|
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
# Inc. |
# This Makefile.in is free software; the Free Software Foundation |
# gives unlimited permission to copy and/or distribute it, |
# with or without modifications, as long as this notice is preserved. |
|
# This program is distributed in the hope that it will be useful, |
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
# PARTICULAR PURPOSE. |
|
@SET_MAKE@ |
VPATH = @srcdir@ |
pkgdatadir = $(datadir)/@PACKAGE@ |
pkgincludedir = $(includedir)/@PACKAGE@ |
pkglibdir = $(libdir)/@PACKAGE@ |
pkglibexecdir = $(libexecdir)/@PACKAGE@ |
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
install_sh_DATA = $(install_sh) -c -m 644 |
install_sh_PROGRAM = $(install_sh) -c |
install_sh_SCRIPT = $(install_sh) -c |
INSTALL_HEADER = $(INSTALL_DATA) |
transform = $(program_transform_name) |
NORMAL_INSTALL = : |
PRE_INSTALL = : |
POST_INSTALL = : |
NORMAL_UNINSTALL = : |
PRE_UNINSTALL = : |
POST_UNINSTALL = : |
build_triplet = @build@ |
host_triplet = @host@ |
target_triplet = @target@ |
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
$(top_srcdir)/fragment.am |
subdir = po |
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
am__aclocal_m4_deps = $(top_srcdir)/../config/enable.m4 \ |
$(top_srcdir)/../config/futex.m4 \ |
$(top_srcdir)/../config/iconv.m4 \ |
$(top_srcdir)/../config/lead-dot.m4 \ |
$(top_srcdir)/../config/lib-ld.m4 \ |
$(top_srcdir)/../config/lib-link.m4 \ |
$(top_srcdir)/../config/lib-prefix.m4 \ |
$(top_srcdir)/../config/multi.m4 \ |
$(top_srcdir)/../config/no-executables.m4 \ |
$(top_srcdir)/../config/override.m4 \ |
$(top_srcdir)/../config/stdint.m4 \ |
$(top_srcdir)/../config/unwind_ipinfo.m4 \ |
$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \ |
$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \ |
$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \ |
$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \ |
$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac |
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
$(ACLOCAL_M4) |
CONFIG_HEADER = $(top_builddir)/config.h |
CONFIG_CLEAN_FILES = |
CONFIG_CLEAN_VPATH_FILES = |
depcomp = |
am__depfiles_maybe = |
SOURCES = |
DIST_SOURCES = |
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@ |
ACLOCAL = @ACLOCAL@ |
ALLOCATOR_H = @ALLOCATOR_H@ |
ALLOCATOR_NAME = @ALLOCATOR_NAME@ |
AMTAR = @AMTAR@ |
AR = @AR@ |
AS = @AS@ |
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@ |
ATOMIC_FLAGS = @ATOMIC_FLAGS@ |
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@ |
AUTOCONF = @AUTOCONF@ |
AUTOHEADER = @AUTOHEADER@ |
AUTOMAKE = @AUTOMAKE@ |
AWK = @AWK@ |
BASIC_FILE_CC = @BASIC_FILE_CC@ |
BASIC_FILE_H = @BASIC_FILE_H@ |
CC = @CC@ |
CCODECVT_CC = @CCODECVT_CC@ |
CCOLLATE_CC = @CCOLLATE_CC@ |
CCTYPE_CC = @CCTYPE_CC@ |
CFLAGS = @CFLAGS@ |
CLOCALE_CC = @CLOCALE_CC@ |
CLOCALE_H = @CLOCALE_H@ |
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@ |
CMESSAGES_CC = @CMESSAGES_CC@ |
CMESSAGES_H = @CMESSAGES_H@ |
CMONEY_CC = @CMONEY_CC@ |
CNUMERIC_CC = @CNUMERIC_CC@ |
CPP = @CPP@ |
CPPFLAGS = @CPPFLAGS@ |
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@ |
CSTDIO_H = @CSTDIO_H@ |
CTIME_CC = @CTIME_CC@ |
CTIME_H = @CTIME_H@ |
CXX = @CXX@ |
CXXCPP = @CXXCPP@ |
CXXFLAGS = @CXXFLAGS@ |
CYGPATH_W = @CYGPATH_W@ |
C_INCLUDE_DIR = @C_INCLUDE_DIR@ |
DEBUG_FLAGS = @DEBUG_FLAGS@ |
DEFS = @DEFS@ |
DSYMUTIL = @DSYMUTIL@ |
DUMPBIN = @DUMPBIN@ |
ECHO_C = @ECHO_C@ |
ECHO_N = @ECHO_N@ |
ECHO_T = @ECHO_T@ |
EGREP = @EGREP@ |
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@ |
EXEEXT = @EXEEXT@ |
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@ |
FGREP = @FGREP@ |
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@ |
GLIBCXX_LIBS = @GLIBCXX_LIBS@ |
GREP = @GREP@ |
INSTALL = @INSTALL@ |
INSTALL_DATA = @INSTALL_DATA@ |
INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
LD = @LD@ |
LDFLAGS = @LDFLAGS@ |
LIBICONV = @LIBICONV@ |
LIBOBJS = @LIBOBJS@ |
LIBS = @LIBS@ |
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@ |
LIBTOOL = @LIBTOOL@ |
LIPO = @LIPO@ |
LN_S = @LN_S@ |
LTLIBICONV = @LTLIBICONV@ |
LTLIBOBJS = @LTLIBOBJS@ |
MAINT = @MAINT@ |
MAKEINFO = @MAKEINFO@ |
MKDIR_P = @MKDIR_P@ |
NM = @NM@ |
NMEDIT = @NMEDIT@ |
OBJDUMP = @OBJDUMP@ |
OBJEXT = @OBJEXT@ |
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@ |
OPT_LDFLAGS = @OPT_LDFLAGS@ |
OS_INC_SRCDIR = @OS_INC_SRCDIR@ |
OTOOL = @OTOOL@ |
OTOOL64 = @OTOOL64@ |
PACKAGE = @PACKAGE@ |
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
PACKAGE_NAME = @PACKAGE_NAME@ |
PACKAGE_STRING = @PACKAGE_STRING@ |
PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
PACKAGE_URL = @PACKAGE_URL@ |
PACKAGE_VERSION = @PACKAGE_VERSION@ |
PATH_SEPARATOR = @PATH_SEPARATOR@ |
RANLIB = @RANLIB@ |
SECTION_FLAGS = @SECTION_FLAGS@ |
SECTION_LDFLAGS = @SECTION_LDFLAGS@ |
SED = @SED@ |
SET_MAKE = @SET_MAKE@ |
SHELL = @SHELL@ |
STRIP = @STRIP@ |
SYMVER_FILE = @SYMVER_FILE@ |
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@ |
USE_NLS = @USE_NLS@ |
VERSION = @VERSION@ |
WARN_FLAGS = @WARN_FLAGS@ |
WERROR = @WERROR@ |
abs_builddir = @abs_builddir@ |
abs_srcdir = @abs_srcdir@ |
abs_top_builddir = @abs_top_builddir@ |
abs_top_srcdir = @abs_top_srcdir@ |
ac_ct_CC = @ac_ct_CC@ |
ac_ct_CXX = @ac_ct_CXX@ |
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
am__leading_dot = @am__leading_dot@ |
am__tar = @am__tar@ |
am__untar = @am__untar@ |
baseline_dir = @baseline_dir@ |
bindir = @bindir@ |
build = @build@ |
build_alias = @build_alias@ |
build_cpu = @build_cpu@ |
build_os = @build_os@ |
build_vendor = @build_vendor@ |
builddir = @builddir@ |
check_msgfmt = @check_msgfmt@ |
datadir = @datadir@ |
datarootdir = @datarootdir@ |
docdir = @docdir@ |
dvidir = @dvidir@ |
enable_shared = @enable_shared@ |
enable_static = @enable_static@ |
exec_prefix = @exec_prefix@ |
glibcxx_MOFILES = @glibcxx_MOFILES@ |
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@ |
glibcxx_POFILES = @glibcxx_POFILES@ |
glibcxx_builddir = @glibcxx_builddir@ |
glibcxx_localedir = @glibcxx_localedir@ |
glibcxx_prefixdir = @glibcxx_prefixdir@ |
glibcxx_srcdir = @glibcxx_srcdir@ |
glibcxx_thread_h = @glibcxx_thread_h@ |
glibcxx_toolexecdir = @glibcxx_toolexecdir@ |
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@ |
gxx_include_dir = @gxx_include_dir@ |
host = @host@ |
host_alias = @host_alias@ |
host_cpu = @host_cpu@ |
host_os = @host_os@ |
host_vendor = @host_vendor@ |
htmldir = @htmldir@ |
includedir = @includedir@ |
infodir = @infodir@ |
install_sh = @install_sh@ |
libdir = @libdir@ |
libexecdir = @libexecdir@ |
libtool_VERSION = @libtool_VERSION@ |
localedir = @localedir@ |
localstatedir = @localstatedir@ |
mandir = @mandir@ |
mkdir_p = @mkdir_p@ |
multi_basedir = @multi_basedir@ |
oldincludedir = @oldincludedir@ |
pdfdir = @pdfdir@ |
port_specific_symbol_files = @port_specific_symbol_files@ |
prefix = @prefix@ |
program_transform_name = @program_transform_name@ |
psdir = @psdir@ |
sbindir = @sbindir@ |
sharedstatedir = @sharedstatedir@ |
srcdir = @srcdir@ |
sysconfdir = @sysconfdir@ |
target = @target@ |
target_alias = @target_alias@ |
target_cpu = @target_cpu@ |
target_os = @target_os@ |
target_vendor = @target_vendor@ |
top_build_prefix = @top_build_prefix@ |
top_builddir = @top_builddir@ |
top_srcdir = @top_srcdir@ |
toplevel_srcdir = @toplevel_srcdir@ |
|
# May be used by various substitution variables. |
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER) |
MAINT_CHARSET = latin1 |
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs |
PWD_COMMAND = $${PWDCMD-pwd} |
STAMP = echo timestamp > |
toolexecdir = $(glibcxx_toolexecdir) |
toolexeclibdir = $(glibcxx_toolexeclibdir) |
|
# These bits are all figured out from configure. Look in acinclude.m4 |
# or configure.ac to see how they are set. See GLIBCXX_EXPORT_FLAGS. |
CONFIG_CXXFLAGS = \ |
$(SECTION_FLAGS) $(EXTRA_CXX_FLAGS) |
|
WARN_CXXFLAGS = \ |
$(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once |
|
|
# -I/-D flags to pass when compiling. |
AM_CPPFLAGS = $(GLIBCXX_INCLUDES) |
|
# Location of installation directories. |
locale_installdir = $(DESTDIR)$(datadir)/locale |
locale_builddir = $(glibcxx_localedir) |
|
# Tell automake that foo.po makes foo.mo |
SUFFIXES = .po .mo |
LOCALE_IN = $(glibcxx_POFILES) |
LOCALE_OUT = $(glibcxx_MOFILES) |
MSGFMT = msgfmt |
|
# Necessary files. |
EXTRA_DIST = string_literals.cc POTFILES.in $(PACKAGE).pot $(LOCALE_IN) |
|
# Specify what gets cleaned up on a 'make clean' |
CLEANFILES = $(LOCALE_OUT) |
all: all-am |
|
.SUFFIXES: |
.SUFFIXES: .po .mo |
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps) |
@for dep in $?; do \ |
case '$(am__configure_deps)' in \ |
*$$dep*) \ |
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ |
&& { if test -f $@; then exit 0; else break; fi; }; \ |
exit 1;; \ |
esac; \ |
done; \ |
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps po/Makefile'; \ |
$(am__cd) $(top_srcdir) && \ |
$(AUTOMAKE) --foreign --ignore-deps po/Makefile |
.PRECIOUS: Makefile |
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
@case '$?' in \ |
*config.status*) \ |
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ |
*) \ |
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ |
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ |
esac; |
|
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
|
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh |
$(am__aclocal_m4_deps): |
|
mostlyclean-libtool: |
-rm -f *.lo |
|
clean-libtool: |
-rm -rf .libs _libs |
tags: TAGS |
TAGS: |
|
ctags: CTAGS |
CTAGS: |
|
|
distdir: $(DISTFILES) |
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
list='$(DISTFILES)'; \ |
dist_files=`for file in $$list; do echo $$file; done | \ |
sed -e "s|^$$srcdirstrip/||;t" \ |
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
case $$dist_files in \ |
*/*) $(MKDIR_P) `echo "$$dist_files" | \ |
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
sort -u` ;; \ |
esac; \ |
for file in $$dist_files; do \ |
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
if test -d $$d/$$file; then \ |
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
if test -d "$(distdir)/$$file"; then \ |
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
fi; \ |
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
fi; \ |
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
else \ |
test -f "$(distdir)/$$file" \ |
|| cp -p $$d/$$file "$(distdir)/$$file" \ |
|| exit 1; \ |
fi; \ |
done |
check-am: all-am |
check: check-am |
all-am: Makefile all-local |
installdirs: |
install: install-am |
install-exec: install-exec-am |
install-data: install-data-am |
uninstall: uninstall-am |
|
install-am: all-am |
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
|
installcheck: installcheck-am |
install-strip: |
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
`test -z '$(STRIP)' || \ |
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
mostlyclean-generic: |
|
clean-generic: |
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) |
|
distclean-generic: |
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
|
maintainer-clean-generic: |
@echo "This command is intended for maintainers to use" |
@echo "it deletes files that may require special tools to rebuild." |
clean: clean-am |
|
clean-am: clean-generic clean-libtool mostlyclean-am |
|
distclean: distclean-am |
-rm -f Makefile |
distclean-am: clean-am distclean-generic |
|
dvi: dvi-am |
|
dvi-am: |
|
html: html-am |
|
html-am: |
|
info: info-am |
|
info-am: |
|
install-data-am: install-data-local |
|
install-dvi: install-dvi-am |
|
install-dvi-am: |
|
install-exec-am: |
|
install-html: install-html-am |
|
install-html-am: |
|
install-info: install-info-am |
|
install-info-am: |
|
install-man: |
|
install-pdf: install-pdf-am |
|
install-pdf-am: |
|
install-ps: install-ps-am |
|
install-ps-am: |
|
installcheck-am: |
|
maintainer-clean: maintainer-clean-am |
-rm -f Makefile |
maintainer-clean-am: distclean-am maintainer-clean-generic |
|
mostlyclean: mostlyclean-am |
|
mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
|
pdf: pdf-am |
|
pdf-am: |
|
ps: ps-am |
|
ps-am: |
|
uninstall-am: |
|
.MAKE: install-am install-strip |
|
.PHONY: all all-am all-local check check-am clean clean-generic \ |
clean-libtool distclean distclean-generic distclean-libtool \ |
distdir dvi dvi-am html html-am info info-am install \ |
install-am install-data install-data-am install-data-local \ |
install-dvi install-dvi-am install-exec install-exec-am \ |
install-html install-html-am install-info install-info-am \ |
install-man install-pdf install-pdf-am install-ps \ |
install-ps-am install-strip installcheck installcheck-am \ |
installdirs maintainer-clean maintainer-clean-generic \ |
mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ |
ps ps-am uninstall uninstall-am |
|
|
.po.mo: |
$(MSGFMT) -o $@ $< |
|
all-local: all-local-$(USE_NLS) |
all-local-no: |
all-local-yes: $(LOCALE_OUT) |
|
# 'make check' needs the catalogs constructed in build directory. |
check: check-$(USE_NLS) |
check-no: |
check-yes: |
$(mkinstalldirs) $(locale_builddir) |
catalogs='$(LOCALE_OUT)'; \ |
for cat in $$catalogs; do \ |
cat=`basename $$cat`; \ |
lang=`echo $$cat | sed 's/\.mo$$//'`; \ |
install_dir=$(locale_builddir)/$$lang/LC_MESSAGES; \ |
$(mkinstalldirs) $$install_dir; \ |
$(INSTALL_DATA) $$cat $$install_dir/$(PACKAGE).mo; \ |
done |
|
# Install rules here. |
# Wish install could just `cp -R ./share $(locale_installdir)` ... |
install-data-local: install-data-local-$(USE_NLS) |
install-data-local-no: |
install-data-local-yes: all-local-yes |
$(mkinstalldirs) $(locale_installdir) |
catalogs='$(LOCALE_OUT)'; \ |
for cat in $$catalogs; do \ |
cat=`basename $$cat`; \ |
lang=`echo $$cat | sed 's/\.mo$$//'`; \ |
install_dir=$(locale_installdir)/$$lang/LC_MESSAGES; \ |
$(mkinstalldirs) $$install_dir; \ |
$(INSTALL_DATA) $$cat $$install_dir/$(PACKAGE).mo; \ |
done |
|
# Maintainence of the .po template file. This rule is never run automatically, |
# and updates the source directory. |
pot: |
cd $(glibcxx_srcdir); \ |
xgettext --default-domain=$(PACKAGE) --add-comments --c++ --debug \ |
--join-existing -o po/$(PACKAGE).pot --keyword=__N \ |
`grep -r -l '__N(".*")' .` |
|
# Tell versions [3.59,3.63) of GNU make to not export all variables. |
# Otherwise a system limit (for SysV at least) may be exceeded. |
.NOEXPORT: |
/fr.po
0,0 → 1,31
# Translations needed for GNU C++ library locale implementation. |
# Copyright (C) 2001 Free Software Foundation, Inc. |
# Benjamin Kosnik <bkoz@redhat.com>, 2001. |
# |
#, fuzzy |
msgid "" |
msgstr "" |
"Project-Id-Version: libstdc++ 3.1.0\n" |
"POT-Creation-Date: 2001-07-31 08:49-0700\n" |
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" |
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" |
"Language-Team: LANGUAGE <LL@li.org>\n" |
"MIME-Version: 1.0\n" |
"Content-Type: text/plain; charset=ISO-8859-1\n" |
"Content-Transfer-Encoding: 8-bit\n" |
|
#: string_literals.cc:23 |
msgid "please" |
|
|
#: string_literals.cc:24 |
msgid "thank you" |
msgstr "merci" |
|
#: string_literals.cc:27 |
msgid "true" |
msgstr "vrai" |
|
#: string_literals.cc:28 |
msgid "false" |
msgstr "faux" |
/de.po
0,0 → 1,31
# Translations needed for GNU C++ library locale implementation. |
# Copyright (C) 2001 Free Software Foundation, Inc. |
# Benjamin Kosnik <bkoz@redhat.com>, 2001. |
# |
#, fuzzy |
msgid "" |
msgstr "" |
"Project-Id-Version: libstdc++ 3.1.0\n" |
"POT-Creation-Date: 2001-07-31 08:49-0700\n" |
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" |
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" |
"Language-Team: LANGUAGE <LL@li.org>\n" |
"MIME-Version: 1.0\n" |
"Content-Type: text/plain; charset=ISO-8859-1\n" |
"Content-Transfer-Encoding: 8-bit\n" |
|
#: string_literals.cc:23 |
msgid "please" |
msgstr "bitte" |
|
#: string_literals.cc:24 |
msgid "thank you" |
msgstr "danke" |
|
#: string_literals.cc:27 |
msgid "true" |
msgstr "zutreffend" |
|
#: string_literals.cc:28 |
msgid "false" |
msgstr "falsch" |
/Makefile.am
0,0 → 1,85
## Makefile for the po subdirectory of the GNU C++ Standard library. |
## |
## Copyright (C) 2001, 2003, 2004, 2009 Free Software Foundation, Inc. |
## |
## This file is part of the libstdc++ version 3 distribution. |
## Process this file with automake to produce Makefile.in. |
|
## This file is part of the GNU ISO C++ Library. This library is free |
## software; you can redistribute it and/or modify it under the |
## terms of the GNU General Public License as published by the |
## Free Software Foundation; either version 3, or (at your option) |
## any later version. |
|
## This library is distributed in the hope that it will be useful, |
## but WITHOUT ANY WARRANTY; without even the implied warranty of |
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
## GNU General Public License for more details. |
|
## You should have received a copy of the GNU General Public License along |
## with this library; see the file COPYING3. If not see |
## <http://www.gnu.org/licenses/>. |
|
include $(top_srcdir)/fragment.am |
|
# Location of installation directories. |
locale_installdir = $(DESTDIR)$(datadir)/locale |
locale_builddir = $(glibcxx_localedir) |
|
# Tell automake that foo.po makes foo.mo |
SUFFIXES = .po .mo |
|
LOCALE_IN = $(glibcxx_POFILES) |
LOCALE_OUT = $(glibcxx_MOFILES) |
|
MSGFMT = msgfmt |
|
# Necessary files. |
EXTRA_DIST = string_literals.cc POTFILES.in $(PACKAGE).pot $(LOCALE_IN) |
|
.po.mo: |
$(MSGFMT) -o $@ $< |
|
all-local: all-local-$(USE_NLS) |
all-local-no: |
all-local-yes: $(LOCALE_OUT) |
|
# 'make check' needs the catalogs constructed in build directory. |
check: check-$(USE_NLS) |
check-no: |
check-yes: |
$(mkinstalldirs) $(locale_builddir) |
catalogs='$(LOCALE_OUT)'; \ |
for cat in $$catalogs; do \ |
cat=`basename $$cat`; \ |
lang=`echo $$cat | sed 's/\.mo$$//'`; \ |
install_dir=$(locale_builddir)/$$lang/LC_MESSAGES; \ |
$(mkinstalldirs) $$install_dir; \ |
$(INSTALL_DATA) $$cat $$install_dir/$(PACKAGE).mo; \ |
done |
|
# Install rules here. |
# Wish install could just `cp -R ./share $(locale_installdir)` ... |
install-data-local: install-data-local-$(USE_NLS) |
install-data-local-no: |
install-data-local-yes: all-local-yes |
$(mkinstalldirs) $(locale_installdir) |
catalogs='$(LOCALE_OUT)'; \ |
for cat in $$catalogs; do \ |
cat=`basename $$cat`; \ |
lang=`echo $$cat | sed 's/\.mo$$//'`; \ |
install_dir=$(locale_installdir)/$$lang/LC_MESSAGES; \ |
$(mkinstalldirs) $$install_dir; \ |
$(INSTALL_DATA) $$cat $$install_dir/$(PACKAGE).mo; \ |
done |
|
# Maintainence of the .po template file. This rule is never run automatically, |
# and updates the source directory. |
pot: |
cd $(glibcxx_srcdir); \ |
xgettext --default-domain=$(PACKAGE) --add-comments --c++ --debug \ |
--join-existing -o po/$(PACKAGE).pot --keyword=__N \ |
`grep -r -l '__N(".*")' .` |
|
# Specify what gets cleaned up on a 'make clean' |
CLEANFILES = $(LOCALE_OUT) |
Makefile.am
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: string_literals.cc
===================================================================
--- string_literals.cc (nonexistent)
+++ string_literals.cc (revision 826)
@@ -0,0 +1,33 @@
+// Copyright (C) 2001, 2009 Free Software Foundation, Inc.
+//
+// This file is part of the GNU ISO C++ Library. This library is free
+// software; you can redistribute it and/or modify it under the
+// terms of the GNU General Public License as published by the
+// Free Software Foundation; either version 3, or (at your option)
+// any later version.
+
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+
+// Under Section 7 of GPL version 3, you are granted additional
+// permissions described in the GCC Runtime Library Exception, version
+// 3.1, as published by the Free Software Foundation.
+
+// You should have received a copy of the GNU General Public License and
+// a copy of the GCC Runtime Library Exception along with this program;
+// see the files COPYING3 and COPYING.RUNTIME respectively. If not, see
+// .
+
+#include
+#define gettext_noop(Str) Str
+
+// For messages testsuite files.
+const char* msgstr1 = gettext_noop("please");
+const char* msgstr2 = gettext_noop("thank you");
+
+// For numpunct implementation.
+const char* msgstr3 = gettext_noop("true");
+const char* msgstr4 = gettext_noop("false");
+
Index: POTFILES.in
===================================================================
--- POTFILES.in (nonexistent)
+++ POTFILES.in (revision 826)
@@ -0,0 +1,24 @@
+## Make/configure bits for translation of the GNU C++ Standard library.
+##
+## Copyright (C) 2001, 2009 Free Software Foundation, Inc.
+##
+## This file is part of the libstdc++ version 3 distribution.
+## Process this file with automake to produce Makefile.in.
+
+## This file is part of the GNU ISO C++ Library. This library is free
+## software; you can redistribute it and/or modify it under the
+## terms of the GNU General Public License as published by the
+## Free Software Foundation; either version 3, or (at your option)
+## any later version.
+
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+
+## You should have received a copy of the GNU General Public License along
+## with this library; see the file COPYING3. If not see
+## .
+
+# include/backward/backward_warning.h
+string_literals.cc
Index: libstdc++.pot
===================================================================
--- libstdc++.pot (nonexistent)
+++ libstdc++.pot (revision 826)
@@ -0,0 +1,56 @@
+# Translations needed for GNU C++ library locale implementation.
+# Copyright (C) 2001 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libstdc++-v3 package.
+# Benjamin Kosnik , 2001.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: libstdc++ 3.4.0\n"
+"POT-Creation-Date: 2003-04-23 15:19-0400\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME \n"
+"Language-Team: LANGUAGE \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-1\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: string_literals.cc:23
+msgid "please"
+msgstr ""
+
+#: string_literals.cc:24
+msgid "thank you"
+msgstr ""
+
+#: string_literals.cc:27
+msgid "true"
+msgstr ""
+
+#: string_literals.cc:28
+msgid "false"
+msgstr ""
+
+#: include/std/std_bitset.h:267 include/std/std_bitset.h:267
+msgid "bitset value is too large to fit in unsigned long"
+msgstr ""
+
+#: include/std/std_bitset.h:469 include/std/std_bitset.h:469
+msgid "bitset is zero-length"
+msgstr ""
+
+#: include/std/std_bitset.h:865 include/std/std_bitset.h:865
+msgid "bitset::set() argument too large"
+msgstr ""
+
+#: include/std/std_bitset.h:890 include/std/std_bitset.h:890
+msgid "bitset::reset() argument too large"
+msgstr ""
+
+#: include/std/std_bitset.h:914 include/std/std_bitset.h:914
+msgid "bitset::flip() argument too large"
+msgstr ""
+
+#: include/std/std_bitset.h:1017 include/std/std_bitset.h:1017
+msgid "bitset::test() argument too large"
+msgstr ""