OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /openrisc/trunk/orpsocv2/boards/xilinx/atlys/backend/par/bin
    from Rev 628 to Rev 630
    ↔ Reverse comparison
  •

Rev 628 → Rev 630

/atlys.ucf
0,0 → 1,324
## This file is a general .ucf for Atlys rev C board
## To use it in a project:
## - remove or comment the lines corresponding to unused pins
## - rename the used signals according to the project
#
#
CONFIG VCCAUX = 3.3;
## clock pin for Atlys rev C board
NET "sys_clk_in" LOC = "L15"; # Bank = 1, Pin name = IO_L42P_GCLK7_M1UDM, Type = GCLK, Sch name = GCLK
#
## onBoard USB controller
# NET "EppAstb" LOC = "B9"; # Bank = 0, Pin name = IO_L35P_GCLK17, Sch name = U1-FLAGA
# NET "EppDstb" LOC = "A9"; # Bank = 0, Pin name = IO_L35N_GCLK16, Sch name = U1-FLAGB
# NET "UsbFlag" LOC = "C15"; # Bank = 0, Pin name = IO_L64P_SCP5, Sch name = U1-FLAGC
# NET "EppWait" LOC = "F13"; # Bank = 0, Pin name = IO_L63P_SCP7, Sch name = U1-SLRD
# NET "EppDB<0>" LOC = "A2"; # Bank = 0, Pin name = IO_L2N, Sch name = U1-FD0
# NET "EppDB<1>" LOC = "D6"; # Bank = 0, Pin name = IO_L3P, Sch name = U1-FD1
# NET "EppDB<2>" LOC = "C6"; # Bank = 0, Pin name = IO_L3N, Sch name = U1-FD2
# NET "EppDB<3>" LOC = "B3"; # Bank = 0, Pin name = IO_L4P, Sch name = U1-FD3
# NET "EppDB<4>" LOC = "A3"; # Bank = 0, Pin name = IO_L4N, Sch name = U1-FD4
# NET "EppDB<5>" LOC = "B4"; # Bank = 0, Pin name = IO_L5P, Sch name = U1-FD5
# NET "EppDB<6>" LOC = "A4"; # Bank = 0, Pin name = IO_L5N, Sch name = U1-FD6
# NET "EppDB<7>" LOC = "C5"; # Bank = 0, Pin name = IO_L6P, Sch name = U1-FD7
#
# NET "UsbClk" LOC = "C10"; # Bank = 0, Pin name = IO_L37P_GCLK13, Sch name = U1-IFCLK
# NET "UsbOE" LOC = "A15"; # Bank = 0, Pin name = IO_L64N_SCP4, Sch name = U1-SLOE
# NET "UsbWR" LOC = "E13"; # Bank = 0, Pin name = IO_L63N_SCP6, Sch name = U1-SLWR
# NET "UsbPktEnd" LOC = "C4"; # Bank = 0, Pin name = IO_L1N_VREF, Sch name = U1-PKTEND
# NET "UsbDir" LOC = "B2"; # Bank = 0, Pin name = IO_L2P, Sch name = U1-SLCS
# NET "UsbMode" LOC = "A5"; # Bank = 0, Pin name = IO_L6N, Sch name = U1-INT0#
#
# NET "UsbAdr<0>" LOC = "A14"; # Bank = 0, Pin name = IO_L62N_VREF, Sch name = U1-FIFOAD0
# NET "UsbAdr<1>" LOC = "B14"; # Bank = 0, Pin name = IO_L62P, Sch name = U1-FIFOAD1
#
## onBoard Quad-SPI Flash
NET "spi0_sck_o" LOC = "R15"; # Bank = 2, Pin name = IO_L1P_CCLK_2, Sch name = SCK
NET "spi0_ss_o<0>" LOC = "V3"; # Bank = 2, Pin name = IO_L65N_CSO_B_2, Sch name = CS
NET "spi0_mosi_o" LOC = "T13"; # Bank = 2, Pin name = IO_L3N_MOSI_CSI_B_MISO0_2, Sch name = SDI
NET "spi0_miso_i" LOC = "R13"; # Bank = 2, Pin name = IO_L3P_D0_DIN_MISO_MISO1_2, Sch name = DQ1
# NET "FlashMemDq<2>" LOC = "T14"; # Bank = 2, Pin name = IO_L12P_D1_MISO2_2, Sch name = DQ2
# NET "FlashMemDq<3>" LOC = "V14"; # Bank = 2, Pin name = IO_L12N_D2_MISO3_2, Sch name = DQ3
#
## onBoard Leds
NET "gpio0_io<0>" LOC = "U18"; # Bank = 1, Pin name = IO_L52N_M1DQ15, Sch name = LD0
NET "gpio0_io<1>" LOC = "M14"; # Bank = 1, Pin name = IO_L53P, Sch name = LD1
NET "gpio0_io<2>" LOC = "N14"; # Bank = 1, Pin name = IO_L53N_VREF, Sch name = LD2
NET "gpio0_io<3>" LOC = "L14"; # Bank = 1, Pin name = IO_L61P, Sch name = LD3
NET "gpio0_io<4>" LOC = "M13"; # Bank = 1, Pin name = IO_L61N, Sch name = LD4
NET "gpio0_io<5>" LOC = "D4"; # Bank = 0, Pin name = IO_L1P_HSWAPEN_0, Sch name = HSWAP/LD5
NET "gpio0_io<6>" LOC = "P16"; # Bank = 1, Pin name = IO_L74N_DOUT_BUSY_1, Sch name = LD6
NET "gpio0_io<7>" LOC = "N12"; # Bank = 2, Pin name = IO_L13P_M1_2, Sch name = M1/LD7
#
## onBoard PUSH BUTTONS
NET "rst_n_pad_i" LOC = "T15"; # Bank = 2, Pin name = IO_L1N_M0_CMPMISO_2, Sch name = M0/RESET
# NET "gpio0_io<16>" LOC = "N4"; # Bank = 3, Pin name = IO_L1P, Sch name = BTNU
# NET "gpio0_io<17>" LOC = "P4"; # Bank = 3, Pin name = IO_L2P, Sch name = BTNL
# NET "gpio0_io<18>" LOC = "P3"; # Bank = 3, Pin name = IO_L2N, Sch name = BTND
# NET "gpio0_io<19>" LOC = "F6"; # Bank = 3, Pin name = IO_L55P_M3A13, Sch name = BTNR
# NET "gpio0_io<20>" LOC = "F5"; # Bank = 3, Pin name = IO_L55N_M3A14, Sch name = BTNC
#
## onBoard SWITCHES
# NET "gpio0_io<8>" LOC = "A10"; # Bank = 0, Pin name = IO_L37N_GCLK12, Sch name = SW0
# NET "gpio0_io<9>" LOC = "D14"; # Bank = 0, Pin name = IO_L65P_SCP3, Sch name = SW1
# NET "gpio0_io<10>" LOC = "C14"; # Bank = 0, Pin name = IO_L65N_SCP2, Sch name = SW2
# NET "gpio0_io<11>" LOC = "P15"; # Bank = 1, Pin name = IO_L74P_AWAKE_1, Sch name = SW3
# NET "gpio0_io<12>" LOC = "P12"; # Bank = 2, Pin name = IO_L13N_D10, Sch name = SW4
# NET "gpio0_io<13>" LOC = "R5"; # Bank = 2, Pin name = IO_L48P_D7, Sch name = SW5
# NET "gpio0_io<14>" LOC = "T5"; # Bank = 2, Pin name = IO_L48N_RDWR_B_VREF_2, Sch name = SW6
# NET "gpio0_io<15>" LOC = "E4"; # Bank = 3, Pin name = IO_L54P_M3RESET, Sch name = SW7
#
## TEMAC Ethernet MAC
NET "eth0_rst_n_o" LOC = "G13"; # Bank = 1, Pin name = IO_L32N_A16_M1A9, Sch name = E-RESET
NET "eth0_tx_clk" LOC = "K16"; # Bank = 1, Pin name = IO_L41N_GCLK8_M1CASN, Sch name = E-TXCLK
NET "eth0_tx_data<0>" LOC = "H16"; # Bank = 1, Pin name = IO_L37N_A6_M1A1, Sch name = E-TXD0
NET "eth0_tx_data<1>" LOC = "H13"; # Bank = 1, Pin name = IO_L36P_A9_M1BA0, Sch name = E-TXD1
NET "eth0_tx_data<2>" LOC = "K14"; # Bank = 1, Pin name = IO_L39N_M1ODT, Sch name = E-TXD2
NET "eth0_tx_data<3>" LOC = "K13"; # Bank = 1, Pin name = IO_L34N_A12_M1BA2, Sch name = E-TXD3
# NET "phyTXD<4>" LOC = "J13"; # Bank = 1, Pin name = IO_L39P_M1A3, Sch name = E-TXD4
# NET "phyTXD<5>" LOC = "G14"; # Bank = 1, Pin name = IO_L30N_A20_M1A11, Sch name = E-TXD5
# NET "phyTXD<6>" LOC = "H12"; # Bank = 1, Pin name = IO_L32P_A17_M1A8, Sch name = E-TXD6
# NET "phyTXD<7>" LOC = "K12"; # Bank = 1, Pin name = IO_L34P_A13_M1WE, Sch name = E-TXD7
#
NET "eth0_tx_en" LOC = "H15"; # Bank = 1, Pin name = IO_L37P_A7_M1A0, Sch name = E-TXEN
NET "eth0_tx_er" LOC = "G18"; # Bank = 1, Pin name = IO_L38N_A4_M1CLKN, Sch name = E-TXER
# NET "phygtxclk" LOC = "L12"; # Bank = 1, Pin name = IO_L40P_GCLK11_M1A5, Sch name = E-GTXCLK
NET "eth0_rx_data<0>" LOC = "G16"; # Bank = 1, Pin name = IO_L38P_A5_M1CLK, Sch name = E-RXD0
NET "eth0_rx_data<1>" LOC = "H14"; # Bank = 1, Pin name = IO_L36N_A8_M1BA1, Sch name = E-RXD1
NET "eth0_rx_data<2>" LOC = "E16"; # Bank = 1, Pin name = IO_L33P_A15_M1A10, Sch name = E-RXD2
NET "eth0_rx_data<3>" LOC = "F15"; # Bank = 1, Pin name = IO_L1P_A25, Sch name = E-RXD3
# NET "phyRXD<4>" LOC = "F14"; # Bank = 1, Pin name = IO_L30P_A21_M1RESET, Sch name = E-RXD4
# NET "phyRXD<5>" LOC = "E18"; # Bank = 1, Pin name = IO_L33N_A14_M1A4, Sch name = E-RXD5
# NET "phyRXD<6>" LOC = "D18"; # Bank = 1, Pin name = IO_L31N_A18_M1A12, Sch name = E-RXD6
# NET "phyRXD<7>" LOC = "D17"; # Bank = 1, Pin name = IO_L31P_A19_M1CKE, Sch name = E-RXD7
NET "eth0_dv" LOC = "F17"; # Bank = 1, Pin name = IO_L35P_A11_M1A7, Sch name = E-RXDV
NET "eth0_rx_er" LOC = "F18"; # Bank = 1, Pin name = IO_L35N_A10_M1A2, Sch name = E-RXER
NET "eth0_rx_clk" LOC = "K15"; # Bank = 1, Pin name = IO_L41P_GCLK9_IRDY1_M1RASN, Sch name = E-RXCLK
NET "eth0_mdc_pad_o" LOC = "F16"; # Bank = 1, Pin name = IO_L1N_A24_VREF, Sch name = E-MDC
NET "eth0_md_pad_io" LOC = "N17"; # Bank = 1, Pin name = IO_L48P_HDC_M1DQ8, Sch name = E-MDIO
NET "eth0_col" LOC = "C17"; # Bank = 1, Pin name = IO_L29P_A23_M1A13, Sch name = E-COL
NET "eth0_crs" LOC = "C18"; # Bank = 1, Pin name = IO_L29N_A22_M1A14, Sch name = E-CRS
 
# NET "phyint" LOC = "L16"; # Bank = 1, Pin name = IO_L42N_GCLK6_TRDY1_M1LDM, Sch name = E-INT
#
## DDR2
############################################################################
## I/O TERMINATION
############################################################################
NET "ddr2_dq[*]" IN_TERM = NONE;
NET "ddr2_dqs" IN_TERM = NONE;
NET "ddr2_dqs_n" IN_TERM = NONE;
NET "ddr2_udqs" IN_TERM = NONE;
NET "ddr2_udqs_n" IN_TERM = NONE;
 
############################################################################
# I/O STANDARDS
############################################################################
NET "ddr2_dq[*]" IOSTANDARD = SSTL18_II;
NET "ddr2_a[*]" IOSTANDARD = SSTL18_II;
NET "ddr2_ba[*]" IOSTANDARD = SSTL18_II;
NET "ddr2_dqs" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_udqs" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_dqs_n" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_udqs_n" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_ck" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_ck_n" IOSTANDARD = DIFF_SSTL18_II;
NET "ddr2_cke" IOSTANDARD = SSTL18_II;
NET "ddr2_ras_n" IOSTANDARD = SSTL18_II;
NET "ddr2_cas_n" IOSTANDARD = SSTL18_II;
NET "ddr2_we_n" IOSTANDARD = SSTL18_II;
NET "ddr2_odt" IOSTANDARD = SSTL18_II;
NET "ddr2_dm" IOSTANDARD = SSTL18_II;
NET "ddr2_udm" IOSTANDARD = SSTL18_II;
NET "ddr2_rzq" IOSTANDARD = SSTL18_II;
NET "ddr2_zio" IOSTANDARD = SSTL18_II;
#NET "c3_sys_clk" IOSTANDARD = LVCMOS25;
#NET "c3_sys_rst_n" IOSTANDARD = LVCMOS18;
NET "ddr2_ck" LOC = "G3"; # Bank = 3, Pin name = IO_L46P_M3CLK, Sch name = DDR-CK_P
NET "ddr2_ck_n" LOC = "G1"; # Bank = 3, Pin name = IO_L46N_M3CLKN, Sch name = DDR-CK_N
NET "ddr2_cke" LOC = "H7"; # Bank = 3, Pin name = IO_L53P_M3CKE, Sch name = DDR-CKE
NET "ddr2_ras_n" LOC = "L5"; # Bank = 3, Pin name = IO_L43P_GCLK23_M3RASN, Sch name = DDR-RAS
NET "ddr2_cas_n" LOC = "K5"; # Bank = 3, Pin name = IO_L43N_GCLK22_IRDY2_M3CASN, Sch name = DDR-CAS
NET "ddr2_we_n" LOC = "E3"; # Bank = 3, Pin name = IO_L50P_M3WE, Sch name = DDR-WE
NET "ddr2_rzq" LOC = "L6"; # Bank = 3, Pin name = IO_L31P, Sch name = RZQ
NET "ddr2_zio" LOC = "C2"; # Bank = 3, Pin name = IO_L83P, Sch name = ZIO
NET "ddr2_ba<0>" LOC = "F2"; # Bank = 3, Pin name = IO_L48P_M3BA0, Sch name = DDR-BA0
NET "ddr2_ba<1>" LOC = "F1"; # Bank = 3, Pin name = IO_L48N_M3BA1, Sch name = DDR-BA1
NET "ddr2_ba<2>" LOC = "E1"; # Bank = 3, Pin name = IO_L50N_M3BA2, Sch name = DDR-BA2
NET "ddr2_a<0>" LOC = "J7"; # Bank = 3, Pin name = IO_L47P_M3A0, Sch name = DDR-A0
NET "ddr2_a<1>" LOC = "J6"; # Bank = 3, Pin name = IO_L47N_M3A1, Sch name = DDR-A1
NET "ddr2_a<2>" LOC = "H5"; # Bank = 3, Pin name = IO_L49N_M3A2, Sch name = DDR-A2
NET "ddr2_a<3>" LOC = "L7"; # Bank = 3, Pin name = IO_L45P_M3A3, Sch name = DDR-A3
NET "ddr2_a<4>" LOC = "F3"; # Bank = 3, Pin name = IO_L51N_M3A4, Sch name = DDR-A4
NET "ddr2_a<5>" LOC = "H4"; # Bank = 3, Pin name = IO_L44P_GCLK21_M3A5, Sch name = DDR-A5
NET "ddr2_a<6>" LOC = "H3"; # Bank = 3, Pin name = IO_L44N_GCLK20_M3A6, Sch name = DDR-A6
NET "ddr2_a<7>" LOC = "H6"; # Bank = 3, Pin name = IO_L49P_M3A7, Sch name = DDR-A7
NET "ddr2_a<8>" LOC = "D2"; # Bank = 3, Pin name = IO_L52P_M3A8, Sch name = DDR-A8
NET "ddr2_a<9>" LOC = "D1"; # Bank = 3, Pin name = IO_L52N_M3A9, Sch name = DDR-A9
NET "ddr2_a<10>" LOC = "F4"; # Bank = 3, Pin name = IO_L51P_M3A10, Sch name = DDR-A10
NET "ddr2_a<11>" LOC = "D3"; # Bank = 3, Pin name = IO_L54N_M3A11, Sch name = DDR-A11
NET "ddr2_a<12>" LOC = "G6"; # Bank = 3, Pin name = IO_L53N_M3A12, Sch name = DDR-A12
NET "ddr2_dq<0>" LOC = "L2"; # Bank = 3, Pin name = IO_L37P_M3DQ0, Sch name = DDR-DQ0
NET "ddr2_dq<1>" LOC = "L1"; # Bank = 3, Pin name = IO_L37N_M3DQ1, Sch name = DDR-DQ1
NET "ddr2_dq<2>" LOC = "K2"; # Bank = 3, Pin name = IO_L38P_M3DQ2, Sch name = DDR-DQ2
NET "ddr2_dq<3>" LOC = "K1"; # Bank = 3, Pin name = IO_L38N_M3DQ3, Sch name = DDR-DQ3
NET "ddr2_dq<4>" LOC = "H2"; # Bank = 3, Pin name = IO_L41P_GCLK27_M3DQ4, Sch name = DDR-DQ4
NET "ddr2_dq<5>" LOC = "H1"; # Bank = 3, Pin name = IO_L41N_GCLK26_M3DQ5, Sch name = DDR-DQ5
NET "ddr2_dq<6>" LOC = "J3"; # Bank = 3, Pin name = IO_L40P_M3DQ6, Sch name = DDR-DQ6
NET "ddr2_dq<7>" LOC = "J1"; # Bank = 3, Pin name = IO_L40N_M3DQ7, Sch name = DDR-DQ7
NET "ddr2_dq<8>" LOC = "M3"; # Bank = 3, Pin name = IO_L36P_M3DQ8, Sch name = DDR-DQ8
NET "ddr2_dq<9>" LOC = "M1"; # Bank = 3, Pin name = IO_L36N_M3DQ9, Sch name = DDR-DQ9
NET "ddr2_dq<10>" LOC = "N2"; # Bank = 3, Pin name = IO_L35P_M3DQ10, Sch name = DDR-DQ10
NET "ddr2_dq<11>" LOC = "N1"; # Bank = 3, Pin name = IO_L35N_M3DQ11, Sch name = DDR-DQ11
NET "ddr2_dq<12>" LOC = "T2"; # Bank = 3, Pin name = IO_L33P_M3DQ12, Sch name = DDR-DQ12
NET "ddr2_dq<13>" LOC = "T1"; # Bank = 3, Pin name = IO_L33N_M3DQ13, Sch name = DDR-DQ13
NET "ddr2_dq<14>" LOC = "U2"; # Bank = 3, Pin name = IO_L32P_M3DQ14, Sch name = DDR-DQ14
NET "ddr2_dq<15>" LOC = "U1"; # Bank = 3, Pin name = IO_L32N_M3DQ15, Sch name = DDR-DQ15
NET "ddr2_udqs" LOC="P2"; # Bank = 3, Pin name = IO_L34P_M3UDQS, Sch name = DDR-UDQS_P
NET "ddr2_udqs_n" LOC="P1"; # Bank = 3, Pin name = IO_L34N_M3UDQSN, Sch name = DDR-UDQS_N
NET "ddr2_dqs" LOC="L4"; # Bank = 3, Pin name = IO_L39P_M3LDQS, Sch name = DDR-LDQS_P
NET "ddr2_dqs_n" LOC="L3"; # Bank = 3, Pin name = IO_L39N_M3LDQSN, Sch name = DDR-LDQS_N
NET "ddr2_dm" LOC="K3"; # Bank = 3, Pin name = IO_L42N_GCLK24_M3LDM, Sch name = DDR-LDM
NET "ddr2_udm" LOC="K4"; # Bank = 3, Pin name = IO_L42P_GCLK25_TRDY2_M3UDM, Sch name = DDR-UDM
NET "ddr2_odt" LOC="K6"; # Bank = 3, Pin name = IO_L45N_M3ODT, Sch name = DDR-ODT
 
## onboard HDMI OUT
# NET "HDMIOUTCLKP" LOC = "B6"; # Bank = 0, Pin name = IO_L8P, Sch name = TMDS-TX-CLK_P
# NET "HDMIOUTCLKN" LOC = "A6"; # Bank = 0, Pin name = IO_L8N_VREF, Sch name = TMDS-TX-CLK_N
# NET "HDMIOUTD0P" LOC = "D8"; # Bank = 0, Pin name = IO_L11P, Sch name = TMDS-TX-0_P
# NET "HDMIOUTD0N" LOC = "C8"; # Bank = 0, Pin name = IO_L11N, Sch name = TMDS-TX-0_N
# NET "HDMIOUTD1P" LOC = "C7"; # Bank = 0, Pin name = IO_L10P, Sch name = TMDS-TX-1_P
# NET "HDMIOUTD1N" LOC = "A7"; # Bank = 0, Pin name = IO_L10N, Sch name = TMDS-TX-1_N
# NET "HDMIOUTD2P" LOC = "B8"; # Bank = 0, Pin name = IO_L33P, Sch name = TMDS-TX-2_P
# NET "HDMIOUTD2N" LOC = "A8"; # Bank = 0, Pin name = IO_L33N, Sch name = TMDS-TX-2_N
# NET "HDMIOUTSCL" LOC = "D9"; # Bank = 0, Pin name = IO_L34P_GCLK19, Sch name = TMDS-TX-SCL
# NET "HDMIOUTSDA" LOC = "C9"; # Bank = 0, Pin name = IO_L34N_GCLK18, Sch name = TMDS-TX-SDA
#
## onboard HDMI IN1 (PMODA)
# NET "HDMIIN1CLKP" LOC = "D11"; # Bank = 0, Pin name = IO_L36P_GCLK15, Sch name = TMDS-RXB-CLK_P
# NET "HDMIIN1CLKN" LOC = "C11"; # Bank = 0, Pin name = IO_L36N_GCLK14, Sch name = TMDS-RXB-CLK_N
# NET "HDMIIN1D0P" LOC = "G9"; # Bank = 0, Pin name = IO_L38P, Sch name = TMDS-RXB-0_P
# NET "HDMIIN1D0N" LOC = "F9"; # Bank = 0, Pin name = IO_L38N_VREF, Sch name = TMDS-RXB-0_N
# NET "HDMIIN1D1P" LOC = "B11"; # Bank = 0, Pin name = IO_L39P, Sch name = TMDS-RXB-1_P
# NET "HDMIIN1D1N" LOC = "A11"; # Bank = 0, Pin name = O_L39N, Sch name = TMDS-RXB-1_N
# NET "HDMIIN1D2P" LOC = "B12"; # Bank = 0, Pin name = IO_L41P, Sch name = TMDS-RXB-2_P
# NET "HDMIIN1D2N" LOC = "A12"; # Bank = 0, Pin name = IO_L41N, Sch name = TMDS-RXB-2_N
# NET "HDMIIN1SCL" LOC = "C13"; # Bank = 0, Pin name = IO_L50P, Sch name = PMOD-SCL
# NET "HDMIIN1SDA" LOC = "A13"; # Bank = 0, Pin name = IO_L50N, Sch name = PMOD-SDA
#
## onboard HDMI IN2
# NET "HDMIIN2CLKP" LOC = "H17"; # Bank = 1, Pin name = IO_L43P_GCLK5_M1DQ4, Sch name = TMDS-RX-CLK_P
# NET "HDMIIN2CLKN" LOC = "H18"; # Bank = 1, Pin name = IO_L43N_GCLK4_M1DQ5, Sch name = TMDS-RX-CLK_N
# NET "HDMIIN2D0P" LOC = "K17"; # Bank = 1, Pin name = IO_L45P_A1_M1LDQS, Sch name = TMDS-RX-0_P
# NET "HDMIIN2D0N" LOC = "K18"; # Bank = 1, Pin name = IO_L45N_A0_M1LDQSN, Sch name = TMDS-RX-0_N
# NET "HDMIIN2D1P" LOC = "L17"; # Bank = 1, Pin name = IO_L46P_FCS_B_M1DQ2, Sch name = TMDS-RX-1_P
# NET "HDMIIN2D1N" LOC = "L18"; # Bank = 1, Pin name = IO_L46N_FOE_B_M1DQ3, Sch name = TMDS-RX-1_N
# NET "HDMIIN2D2P" LOC = "J16"; # Bank = 1, Pin name = IO_L44P_A3_M1DQ6, Sch name = TMDS-RX-2_P
# NET "HDMIIN2D2N" LOC = "J18"; # Bank = 1, Pin name = IO_L44N_A2_M1DQ7, Sch name = TMDS-RX-2_N
# NET "HDMIIN2SCL" LOC = "M16"; # Bank = 1, Pin name = IO_L47P_FWE_B_M1DQ0, Sch name = TMDS-RX-SCL
# NET "HDMIIN2SDA" LOC = "M18"; # Bank = 1, Pin name = IO_L47N_LDC_M1DQ1, Sch name = TMDS-RX-SDA
#
## onboard USB Host Controller
# NET "USBCLK" LOC = "P17"; # Bank = 1, Pin name = IO_L49P_M1DQ10, Sch name = PIC32-SCK1
# NET "USBSS" LOC = "P18"; # Bank = 1, Pin name = IO_L49N_M1DQ11, Sch name = PIC32-SS1
# NET "USBSDI" LOC = "N15"; # Bank = 1, Pin name = IO_L50P_M1UDQS, Sch name = PIC32-SDI1
# NET "USBSDO" LOC = "N18"; # Bank = 1, Pin name = IO_L48N_M1DQ9, Sch name = PIC32-SDO1
#
## Audio
# NET "BITCLK" LOC = "L13"; # Bank = 1, Pin name = IO_L40N_GCLK10_M1A6, Sch name = AUD-BIT-CLK
# NET "AUDSDI" LOC = "T18"; # Bank = 1, Pin name = IO_L51N_M1DQ13, Sch name = AUD-SDI
# NET "AUDSDO" LOC = "N16"; # Bank = 1, Pin name = IO_L50N_M1UDQSN, Sch name = AUD-SDO
# NET "AUDSYNC" LOC = "U17"; # Bank = 1, Pin name = IO_L52P_M1DQ14, Sch name = AUD-SYNC
# NET "AUDRST" LOC = "T17"; # Bank = 1, Pin name = IO_L51P_M1DQ12, Sch name = AUD-RESET
#
## PMOD Connector
# NET "JB<0>" LOC = "T3"; # Bank = 2, Pin name = IO_L62N_D6, Sch name = JA-D0_N
# NET "JB<1>" LOC = "R3"; # Bank = 2, Pin name = IO_L62P_D5, Sch name = JA-D0_P
# NET "JB<2>" LOC = "P6"; # Bank = 2, Pin name = IO_L64N_D9, Sch name = JA-D2_N
# NET "JB<3>" LOC = "N5"; # Bank = 2, Pin name = IO_L64P_D8, Sch name = JA-D2_P
# NET "JB<4>" LOC = "V9"; # Bank = 2, Pin name = IO_L32N_GCLK28, Sch name = JA-CLK_N
# NET "JB<5>" LOC = "T9"; # Bank = 2, Pin name = IO_L32P_GCLK29, Sch name = JA-CLK_P
# NET "JB<6>" LOC = "V4"; # Bank = 2, Pin name = IO_L63N, Sch name = JA-D1_N
# NET "JB<7>" LOC = "T4"; # Bank = 2, Pin name = IO_L63P, Sch name = JA-D1_P
#
## onboard VHDCI
## Channnel 1 connects to P signals, Channel 2 to N signals
# NET "VHDCIIO1<0>" LOC = "U16"; # Bank = 2, Pin name = IO_L2P_CMPCLK, Sch name = EXP-IO1_P
# NET "VHDCIIO1<1>" LOC = "U15"; # Bank = 2, Pin name = *IO_L5P, Sch name = EXP-IO2_P
# NET "VHDCIIO1<2>" LOC = "U13"; # Bank = 2, Pin name = IO_L14P_D11, Sch name = EXP-IO3_P
# NET "VHDCIIO1<3>" LOC = "M11"; # Bank = 2, Pin name = *IO_L15P, Sch name = EXP-IO4_P
# NET "VHDCIIO1<4>" LOC = "R11"; # Bank = 2, Pin name = IO_L16P, Sch name = EXP-IO5_P
# NET "VHDCIIO1<5>" LOC = "T12"; # Bank = 2, Pin name = *IO_L19P, Sch name = EXP-IO6_P
# NET "VHDCIIO1<6>" LOC = "N10"; # Bank = 2, Pin name = *IO_L20P, Sch name = EXP-IO7_P
# NET "VHDCIIO1<7>" LOC = "M10"; # Bank = 2, Pin name = *IO_L22P, Sch name = EXP-IO8_P
# NET "VHDCIIO1<8>" LOC = "U11"; # Bank = 2, Pin name = IO_L23P, Sch name = EXP-IO9_P
# NET "VHDCIIO1<9>" LOC = "R10"; # Bank = 2, Pin name = IO_L29P_GCLK3, Sch name = EXP-IO10_P
# NET "VHDCIIO1<10>" LOC = "U10"; # Bank = 2, Pin name = IO_L30P_GCLK1_D13, Sch name = EXP-IO11_P
# NET "VHDCIIO1<11>" LOC = "R8"; # Bank = 2, Pin name = IO_L31P_GCLK31_D14, Sch name = EXP-IO12_P
# NET "VHDCIIO1<12>" LOC = "M8"; # Bank = 2, Pin name = *IO_L40P, Sch name = EXP-IO13_P
# NET "VHDCIIO1<13>" LOC = "U8"; # Bank = 2, Pin name = IO_L41P, Sch name = EXP-IO14_P
# NET "VHDCIIO1<14>" LOC = "U7"; # Bank = 2, Pin name = IO_L43P, Sch name = EXP-IO15_P
# NET "VHDCIIO1<15>" LOC = "N7"; # Bank = 2, Pin name = *IO_L44P, Sch name = EXP-IO16_P
# NET "VHDCIIO1<16>" LOC = "T6"; # Bank = 2, Pin name = IO_L45P, Sch name = EXP-IO17_P
# NET "VHDCIIO1<17>" LOC = "R7"; # Bank = 2, Pin name = IO_L46P, Sch name = EXP-IO18_P
# NET "VHDCIIO1<18>" LOC = "N6"; # Bank = 2, Pin name = *IO_L47P, Sch name = EXP-IO19_P
# NET "VHDCIIO1<19>" LOC = "U5"; # Bank = 2, Pin name = IO_49P_D3, Sch name = EXP-IO20_P
#
# NET "VHDCIIO2<0>" LOC = "V16"; # Bank = 2, Pin name = IO_L2N_CMPMOSI, Sch name = EXP-IO1_N
# NET "VHDCIIO2<1>" LOC = "V15"; # Bank = 2, Pin name = *IO_L5N, Sch name = EXP-IO2_N
# NET "VHDCIIO2<2>" LOC = "V13"; # Bank = 2, Pin name = IO_L14N_D12, Sch name = EXP-IO3_N
# NET "VHDCIIO2<3>" LOC = "N11"; # Bank = 2, Pin name = *IO_L15N, Sch name = EXP-IO4_N
# NET "VHDCIIO2<4>" LOC = "T11"; # Bank = 2, Pin name = IO_L16N_VREF, Sch name = EXP-IO5_N
# NET "VHDCIIO2<5>" LOC = "V12"; # Bank = 2, Pin name = *IO_L19N, Sch name = EXP-IO6_N
# NET "VHDCIIO2<6>" LOC = "P11"; # Bank = 2, Pin name = *IO_L20N, Sch name = EXP-IO7_N
# NET "VHDCIIO2<7>" LOC = "N9"; # Bank = 2, Pin name = *IO_L22N, Sch name = EXP-IO8_N
# NET "VHDCIIO2<8>" LOC = "V11"; # Bank = 2, Pin name = IO_L23N, Sch name = EXP-IO9_N
# NET "VHDCIIO2<9>" LOC = "T10"; # Bank = 2, Pin name = IO_L29N_GCLK2, Sch name = EXP-IO10_N
# NET "VHDCIIO2<10>" LOC = "V10"; # Bank = 2, Pin name = IO_L30N_GCLK0_USERCCLK, Sch name = EXP-IO11_N
# NET "VHDCIIO2<11>" LOC = "T8"; # Bank = 2, Pin name = IO_L31N_GCLK30_D15, Sch name = EXP-IO12_N
# NET "VHDCIIO2<12>" LOC = "N8"; # Bank = 2, Pin name = *IO_L40N, Sch name = EXP-IO13_N
# NET "VHDCIIO2<13>" LOC = "V8"; # Bank = 2, Pin name = IO_L41N_VREF, Sch name = EXP-IO14_N
# NET "VHDCIIO2<14>" LOC = "V7"; # Bank = 2, Pin name = IO_L43N, Sch name = EXP-IO15_N
# NET "VHDCIIO2<15>" LOC = "P8"; # Bank = 2, Pin name = *IO_L44N, Sch name = EXP-IO16_N
# NET "VHDCIIO2<16>" LOC = "V6"; # Bank = 2, Pin name = IO_L45N, Sch name = EXP-IO17_N
# NET "VHDCIIO2<17>" LOC = "T7"; # Bank = 2, Pin name = IO_L46N, Sch name = EXP-IO18_N
# NET "VHDCIIO2<18>" LOC = "P7"; # Bank = 2, Pin name = *IO_L47N, Sch name = EXP-IO19_N
# NET "VHDCIIO2<19>" LOC = "V5"; # Bank = 2, Pin name = IO_49N_D4, Sch name = EXP-IO20_N
#
## USB UART Connector
NET "uart0_srx_pad_i" LOC = "A16"; # Bank = 0, Pin name = IO_L66N_SCP0, Sch name = USBB-RXD
NET "uart0_stx_pad_o" LOC = "B16"; # Bank = 0, Pin name = IO_L66P_SCP1, Sch name = USBB-TXD
#
#
# Constraints
 
NET "sys_clk_in" TNM_NET = "sys_clk_in";
TIMESPEC TS_sys_clk_in = PERIOD "sys_clk_in" 100 MHz HIGH 50 %;
 
NET "wb_clk" TNM_NET = "wb_clk";
TIMESPEC TS_wb_clk = PERIOD "wb_clk" 50 MHz high 50%;
 
NET rst_n_pad_i TIG;
 
NET "gpio0_io<*>" TIG;
 
# ethernet constraints
NET eth0_rst_n_o TIG;
 
NET "eth0_tx_clk" TNM_NET = "eth0_tx_clk";
TIMESPEC TS_eth0_tx_clk = PERIOD "eth0_tx_clk" 25 MHz high 50%;
 
NET "eth0_rx_clk" TNM_NET = "eth0_rx_clk";
TIMESPEC TS_eth0_rx_clk = PERIOD "eth0_rx_clk" 25 MHz high 50%;
 
# DDR2 Constraints
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc?_wrapper_inst/mcb_ui_top_inst/mcb_raw_wrapper_inst/selfrefresh_mcb_mode" TIG;
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/c?_pll_lock" TIG;
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc?_wrapper_inst/mcb_ui_top_inst/mcb_raw_wrapper_inst/gen_term_calib.mcb_soft_calibration_top_inst/mcb_soft_calibration_inst/CKE_Train" TIG; ##This path exists for DDR2 only
 
NET "xilinx_ddr2_0/xilinx_ddr2_if0/ddr2_mig/memc3_infrastructure_inst/sys_clk_ibufg" TNM_NET = "SYS_CLK3";
TIMESPEC "TS_SYS_CLK3" = PERIOD "SYS_CLK3" 3.75 ns HIGH 50 %;

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.