URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/orpsocv2/sw/tests
- from Rev 425 to Rev 426
- ↔ Reverse comparison
Rev 425 → Rev 426
/or1200/sim/or1200-except.S
513,37 → 513,37
l.nop |
l.movhi r5, hi(0x44004800) /* Put "l.jr r9" instruction in r5 */ |
l.ori r5, r5, lo(0x44004800) |
l.sw 0x0(r0), r5 /* Write "l.j r9" to address 0x0 in RAM */ |
l.movhi r5, 0xee00 /* Put an illegal instruction in r5 */ |
l.sw 0x4(r0), r5 /* Write illegal instruction to RAM addr 0x4 */ |
l.movhi r5, 0x1500 /* l.nop after illegal instruction */ |
l.sw 0x8(r0), r5 /* Write nop to RAM addr 0x8 */ |
l.sw 0x0(r0), r5 /* Write "l.j r9" to address 0x0 in RAM */ |
l.movhi r5, 0xee00 /* Put an illegal instruction in r5 */ |
l.sw 0x4(r0), r5 /* Write illegal instruction to RAM addr 0x4 */ |
l.movhi r5, 0x1500 /* l.nop after illegal instruction */ |
l.sw 0x8(r0), r5 /* Write nop to RAM addr 0x8 */ |
l.mtspr r0,r0,SPR_ICBIR /* Invalidate line 0 of cache */ |
/* Call 0x4, illegal opcode instruction */ |
/* Jump to 0x4 - illegal opcode instruction */ |
l.ori r6, r0, 0x4 |
l.jalr r6 /* Jump to address 0x4, landing on an illegal instruction */ |
l.addi r12,r12,1 /* Increment 2nd exception counter */ |
l.nop /* Should return here */ |
l.jalr r6 /* Jump to address 0x4, land on illegal insn */ |
l.addi r12,r12,1 /* Increment 2nd exception counter */ |
l.nop /* Should return here */ |
l.nop |
|
/* Test in delay slot */ |
|
l.movhi r5, 0xff00 /* Put an illegal instruction in r5 */ |
l.sw 0x4(r0), r5 /* Write illegal instruction to RAM addr 0x4 */ |
l.movhi r5, 0xee00 /* Put an illegal instruction in r5 */ |
l.sw 0x4(r0), r5 /* Write illegal instruction to RAM addr 0x4 */ |
l.mtspr r0,r0,SPR_ICBIR /* Invalidate line 0 of cache */ |
l.jalr r0 /* Jump to address 0, will be a jump back but with an illegal |
dslot instruction which will befixed by handler */ |
l.addi r12,r12,1 /* Increment 2nd exception counter */ |
l.nop /* Should return here */ |
l.addi r12,r12,1 /* Increment 2nd exception counter */ |
l.nop /* Should return here */ |
|
/* Check 1st and 2nd exception counters are equal */ |
l.sfeq r11,r12 /* Should be equal */ |
l.sfeq r11,r12 /* Should be equal */ |
l.bf 1f |
l.nop |
l.or r3, r12, r12 |
l.nop 2 /* Report expected exception count */ |
l.nop 2 /* Report expected exception count */ |
l.or r3, r11, r11 |
l.nop 2 /* Report actual exception count */ |
l.nop 2 /* Report actual exception count */ |
l.nop 1 |
1: l.nop |
l.nop |
/sdram/board/sdram-rows.c
0,0 → 1,84
/* |
* SDRAM row test, for running on the board (with printfs) |
* |
* Tests accessing every row |
* |
*/ |
|
#include "cpu-utils.h" |
#include "board.h" |
#include "sdram.h" |
#include "uart.h" |
#include "printf.h" |
|
#ifndef _SDRAM_H_ |
#define _SDRAM_H_ |
|
#ifdef MT48LC32M16A2 // 64MB SDRAM part |
#define SDRAM_SIZE 0x04000000 |
#define SDRAM_ROW_SIZE 2048 // in bytes (10 bits col addr, 2 bytes per) |
#define SDRAM_NUM_ROWS_PER_BANK (8192) // 13-bit row address |
#define SDRAM_NUM_BANKS 4 |
#endif |
|
#ifdef MT48LC16M16A2 // 32MB SDRAM part |
#define SDRAM_SIZE 0x02000000 |
#define SDRAM_ROW_SIZE 1024 // in bytes (9 bits col addr, 2 bytes per) |
#define SDRAM_NUM_ROWS_PER_BANK (8192) // 13-bit row address |
#define SDRAM_NUM_BANKS 4 |
#endif |
|
#ifdef MT48LC4M16A2 // 8MB SDRAM part |
#define SDRAM_SIZE 0x800000 |
#define SDRAM_ROW_SIZE 512 // in bytes (8 bits col addr, 2 bytes per) |
#define SDRAM_NUM_ROWS_PER_BANK (4096) // 12-bit row address |
#define SDRAM_NUM_BANKS 4 |
#endif |
|
|
#endif |
|
|
#define SDRAM_NUM_ROWS (SDRAM_NUM_ROWS_PER_BANK * SDRAM_NUM_BANKS) |
|
#define START_ROW 128 |
|
int main() |
{ |
|
uart_init(DEFAULT_UART); |
|
|
printf("\n\tSDRAM rows test\n"); |
|
printf("\n\tWriting\n"); |
|
int i; // Skip first 64KB, code/stack resides there - TODO determine this from |
// stack linker variable! |
for(i=START_ROW;i<(SDRAM_NUM_ROWS);i++) |
{ |
REG32((i*(SDRAM_ROW_SIZE))) = i; |
printf("\r\t0x%x", i); |
} |
|
printf("\n\tReading\n"); |
|
int read_result = 0; |
|
for(i=START_ROW;i<(SDRAM_NUM_ROWS);i++) |
{ |
printf("\r\t0x%x", i); |
read_result = REG32((i*(SDRAM_ROW_SIZE))); |
if (read_result != i) |
{ |
printf("\n\Error at 0x%x, read 0x%x, expected 0x%x\n", |
(i*SDRAM_ROW_SIZE), read_result, i); |
report(0xbaaaaaad); |
report(i); |
report(read_result); |
exit(0xbaaaaaad); |
} |
} |
printf("\n\tTest OK.\n"); |
exit(0x8000000d); |
} |
/sdram/board/Makefile
0,0 → 1,14
SW_ROOT=../../.. |
include $(SW_ROOT)/Makefile.inc |
|
OR32_CFLAGS += -I. |
|
%.dis: %.elf |
$(Q)$(OR32_OBJDUMP) -d $< > $@ |
|
%.bin: %.elf |
$(Q)$(OR32_OBJCOPY) -O binary $< $@ |
|
clean: |
$(Q)rm -f *.elf *.bin *.vmem *.flashin *.dis |
|
/sdram/sim/sdram-board-rows.c
File deleted
/sdram/sim/sdram-cols.c
6,7 → 6,7
* |
*/ |
|
#include "or32-utils.h" |
#include "cpu-utils.h" |
#include "board.h" |
#include "sdram.h" |
|
/uart/sim/uart-echo.c
File deleted