OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /openrisc/trunk/rtos/ecos-2.0/packages/devs/pcmcia
    from Rev 27 to Rev 174
    ↔ Reverse comparison
  •

Rev 27 → Rev 174

/arm/cerf/v2_0/cdl/pcmcia_cerf.cdl
0,0 → 1,66
# ====================================================================
#
# pcmcia_cerf.cdl
#
# PCMCIA (Compact Flash) - Hardware support on Intrinsyc Cerf
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): gthomas
# Original data: gthomas
# Contributors:
# Date: 2000-07-06
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
cdl_package CYGPKG_DEVS_PCMCIA_CERF {
display "SA11x0/Cerf PCMCIA support"
 
parent CYGPKG_IO_PCMCIA
active_if CYGPKG_IO_PCMCIA
active_if CYGPKG_HAL_ARM_SA11X0_CERF
 
implements CYGHWR_IO_PCMCIA_DEVICE
 
include_dir .
include_files ; # none _exported_ whatsoever
description "PCMCIA (Compact Flash) device support for SA11x0/Cerf"
compile cerf_pcmcia.c
}
 
/arm/cerf/v2_0/ChangeLog
0,0 → 1,39
2002-02-04 Gary Thomas <gthomas@redhat.com>
 
* src/cerf_pcmcia.c:
* cdl/pcmcia_cerf.cdl: New file(s) - port to Intrinsyc CerfCube.
 
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
/arm/cerf/v2_0/src/cerf_pcmcia.c
0,0 → 1,272
//==========================================================================
//
// devs/pcmcia/cerf/cerf_pcmcia.c
//
// PCMCIA support (Card Services)
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// Date: 2000-07-06
// Purpose: PCMCIA support
// Description:
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/io_pcmcia.h>
 
#include <cyg/hal/hal_io.h> // IO macros
#include <cyg/hal/hal_arch.h> // Register state info
#include <cyg/hal/hal_intr.h> // HAL interrupt macros
#include <cyg/hal/drv_api.h>
 
#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h> // Configuration header
#include <cyg/kernel/kapi.h>
#endif
#include <cyg/hal/hal_if.h>
 
#include <cyg/io/pcmcia.h>
#include <cyg/infra/diag.h>
 
#include <cyg/hal/hal_sa11x0.h> // Board definitions
#include <cyg/hal/cerf.h>
 
#ifdef CYGPKG_KERNEL
static cyg_interrupt cf_detect_interrupt;
static cyg_handle_t cf_detect_interrupt_handle;
static cyg_interrupt cf_irq_interrupt;
static cyg_handle_t cf_irq_interrupt_handle;
 
// This ISR is called when a CompactFlash board is inserted
static int
cf_detect_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_interrupt_mask(SA1110_CF_DETECT);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the board insertion
static void
cf_detect_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
struct cf_slot *slot = (struct cf_slot *)data;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Removed; // Implies powered up, etc.
}
cyg_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_interrupt_unmask(SA1110_CF_DETECT);
}
 
// This ISR is called when the card interrupt occurs
static int
cf_irq_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_drv_interrupt_mask(SA1110_CF_IRQ);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the card interrupt
static void
cf_irq_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
struct cf_slot *slot = (struct cf_slot *)data;
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
cyg_bool was_ctrlc_int;
#endif
 
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
was_ctrlc_int = HAL_CTRLC_CHECK(vector, data);
if (!was_ctrlc_int) // Fall through and run normal code
#endif
// Process interrupt
(slot->irq_handler.handler)(vector, count, slot->irq_handler.param);
// Allow interrupts to happen again
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
}
#endif
 
//
// Fill in the details of a PCMCIA slot and initialize the device
//
void
cf_hwr_init(struct cf_slot *slot)
{
static int int_init = 0;
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if (!int_init) {
int_init = 1;
#ifdef CYGPKG_KERNEL
// Set up interrupts
cyg_drv_interrupt_create(SA1110_CF_DETECT,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_detect_isr,
(cyg_DSR_t *)cf_detect_dsr,
&cf_detect_interrupt_handle,
&cf_detect_interrupt);
cyg_drv_interrupt_attach(cf_detect_interrupt_handle);
cyg_drv_interrupt_configure(SA1110_CF_DETECT, true, true); // Detect either edge
cyg_drv_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_drv_interrupt_unmask(SA1110_CF_DETECT);
cyg_drv_interrupt_create(SA1110_CF_IRQ,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_irq_isr,
(cyg_DSR_t *)cf_irq_dsr,
&cf_irq_interrupt_handle,
&cf_irq_interrupt);
cyg_drv_interrupt_attach(cf_irq_interrupt_handle);
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
#endif
cyg_drv_interrupt_configure(SA1110_CF_IRQ, false, false); // Falling edge
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
slot->attr = (unsigned char *)0x38000000;
slot->attr_length = 0x200;
slot->io = (unsigned char *)0x30000000;
slot->io_length = 0x04000000;
slot->mem = (unsigned char *)0x3C000000;
slot->mem_length = 0x04000000;
slot->int_num = SA1110_CF_IRQ;
#ifdef CYG_HAL_STARTUP_ROM
// Disable CF bus & power (idle/off)
cerf_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_OFF |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
#endif
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
if ((_cerf_BCR & SA1110_BCR_CF_POWER) == SA1110_BCR_CF_POWER_ON) {
// Assume that the ROM environment has turned the bus on
slot->state = CF_SLOT_STATE_Ready;
} else {
slot->state = CF_SLOT_STATE_Inserted;
}
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
void
cf_hwr_poll(struct cf_slot *slot)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
static void
do_delay(int ticks)
{
#ifdef CYGPKG_KERNEL
cyg_thread_delay(ticks);
#else
CYGACC_CALL_IF_DELAY_US(10000*ticks);
#endif
}
 
//
// Transition the card/slot to a new state
// note: currently only supports transitions to Ready, Empty
//
bool
cf_hwr_change_state(struct cf_slot *slot, int new_state)
{
int i, ptr, len;
unsigned char buf[256];
 
if (new_state == CF_SLOT_STATE_Ready) {
if (slot->state == CF_SLOT_STATE_Inserted) {
cerf_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
do_delay(30); // At least 300 ms
slot->state = CF_SLOT_STATE_Powered;
cerf_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_ENABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(1); // At least 10 us
slot->state = CF_SLOT_STATE_Reset;
cerf_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(5); // At least 20 ms
// Wait until the card is ready to talk
for (i = 0; i < 10; i++) {
ptr = 0;
if (cf_get_CIS(slot, CF_CISTPL_VERS_1, buf, &len, &ptr)) {
slot->state = CF_SLOT_STATE_Ready;
break;
}
do_delay(10);
}
}
}
}
 
//
// Acknowledge interrupt (used in non-kernel environments)
//
void
cf_hwr_clear_interrupt(struct cf_slot *slot)
{
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
/arm/assabet/v2_0/cdl/pcmcia_assabet.cdl
0,0 → 1,66
# ====================================================================
#
# pcmcia_assabet.cdl
#
# PCMCIA (Compact Flash) - Hardware support on Assabet
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): gthomas
# Original data: gthomas
# Contributors:
# Date: 2000-07-06
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
cdl_package CYGPKG_DEVS_PCMCIA_ASSABET {
display "SA11x0/Assabet PCMCIA support"
 
parent CYGPKG_IO_PCMCIA
active_if CYGPKG_IO_PCMCIA
active_if CYGPKG_HAL_ARM_SA11X0_ASSABET
 
implements CYGHWR_IO_PCMCIA_DEVICE
 
include_dir .
include_files ; # none _exported_ whatsoever
description "PCMCIA (Compact Flash) device support for SA11x0/Assabet"
compile assabet_pcmcia.c
}
 
/arm/assabet/v2_0/ChangeLog
0,0 → 1,73
2001-07-13 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c (cf_hwr_change_state): Check for VERS_1
field instead of MANID since some cards don't seem to have that one.
Suggested by I-Jui Sung <ijsung@csie.nctu.edu.tw>.
 
2000-09-17 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Change interrupt functions to have same
calling convention as DSR.
 
2000-09-12 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Fix build problem when built for eCos.
 
2000-08-28 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c (cf_irq_dsr): Support [shared] network
debug situation where "IF" functions need to see device interrupts.
This is used to detect ^C over the connection. This also requires
additional care when setting up the bus initially.
 
2000-08-24 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Add hardware function to clear interrupts.
 
2000-07-16 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Remove dependency in generic I/O package.
 
2000-07-15 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Support new slot-oriented interrupts.
 
2000-07-14 Gary Thomas <gthomas@redhat.com>
 
* src/assabet_pcmcia.c: Support running in non-kernel (stand-alone)
environments.
 
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
/arm/assabet/v2_0/src/assabet_pcmcia.c
0,0 → 1,272
//==========================================================================
//
// devs/pcmcia/assabet/assabet_pcmcia.c
//
// PCMCIA support (Card Services)
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// Date: 2000-07-06
// Purpose: PCMCIA support
// Description:
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/io_pcmcia.h>
 
#include <cyg/hal/hal_io.h> // IO macros
#include <cyg/hal/hal_arch.h> // Register state info
#include <cyg/hal/hal_intr.h> // HAL interrupt macros
#include <cyg/hal/drv_api.h>
 
#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h> // Configuration header
#include <cyg/kernel/kapi.h>
#endif
#include <cyg/hal/hal_if.h>
 
#include <cyg/io/pcmcia.h>
#include <cyg/infra/diag.h>
 
#include <cyg/hal/hal_sa11x0.h> // Board definitions
#include <cyg/hal/assabet.h>
 
#ifdef CYGPKG_KERNEL
static cyg_interrupt cf_detect_interrupt;
static cyg_handle_t cf_detect_interrupt_handle;
static cyg_interrupt cf_irq_interrupt;
static cyg_handle_t cf_irq_interrupt_handle;
 
// This ISR is called when a CompactFlash board is inserted
static int
cf_detect_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_interrupt_mask(SA1110_CF_DETECT);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the board insertion
static void
cf_detect_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
struct cf_slot *slot = (struct cf_slot *)data;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Removed; // Implies powered up, etc.
}
cyg_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_interrupt_unmask(SA1110_CF_DETECT);
}
 
// This ISR is called when the card interrupt occurs
static int
cf_irq_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_drv_interrupt_mask(SA1110_CF_IRQ);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the card interrupt
static void
cf_irq_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
struct cf_slot *slot = (struct cf_slot *)data;
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
cyg_bool was_ctrlc_int;
#endif
 
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
was_ctrlc_int = HAL_CTRLC_CHECK(vector, data);
if (!was_ctrlc_int) // Fall through and run normal code
#endif
// Process interrupt
(slot->irq_handler.handler)(vector, count, slot->irq_handler.param);
// Allow interrupts to happen again
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
}
#endif
 
//
// Fill in the details of a PCMCIA slot and initialize the device
//
void
cf_hwr_init(struct cf_slot *slot)
{
static int int_init = 0;
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if (!int_init) {
int_init = 1;
#ifdef CYGPKG_KERNEL
// Set up interrupts
cyg_drv_interrupt_create(SA1110_CF_DETECT,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_detect_isr,
(cyg_DSR_t *)cf_detect_dsr,
&cf_detect_interrupt_handle,
&cf_detect_interrupt);
cyg_drv_interrupt_attach(cf_detect_interrupt_handle);
cyg_drv_interrupt_configure(SA1110_CF_DETECT, true, true); // Detect either edge
cyg_drv_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_drv_interrupt_unmask(SA1110_CF_DETECT);
cyg_drv_interrupt_create(SA1110_CF_IRQ,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_irq_isr,
(cyg_DSR_t *)cf_irq_dsr,
&cf_irq_interrupt_handle,
&cf_irq_interrupt);
cyg_drv_interrupt_attach(cf_irq_interrupt_handle);
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
#endif
cyg_drv_interrupt_configure(SA1110_CF_IRQ, false, false); // Falling edge
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
slot->attr = (unsigned char *)0x38000000;
slot->attr_length = 0x200;
slot->io = (unsigned char *)0x30000000;
slot->io_length = 0x04000000;
slot->mem = (unsigned char *)0x3C000000;
slot->mem_length = 0x04000000;
slot->int_num = SA1110_CF_IRQ;
#ifdef CYG_HAL_STARTUP_ROM
// Disable CF bus & power (idle/off)
assabet_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_OFF |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
#endif
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
if ((_assabet_BCR & SA1110_BCR_CF_POWER) == SA1110_BCR_CF_POWER_ON) {
// Assume that the ROM environment has turned the bus on
slot->state = CF_SLOT_STATE_Ready;
} else {
slot->state = CF_SLOT_STATE_Inserted;
}
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
void
cf_hwr_poll(struct cf_slot *slot)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
static void
do_delay(int ticks)
{
#ifdef CYGPKG_KERNEL
cyg_thread_delay(ticks);
#else
CYGACC_CALL_IF_DELAY_US(10000*ticks);
#endif
}
 
//
// Transition the card/slot to a new state
// note: currently only supports transitions to Ready, Empty
//
bool
cf_hwr_change_state(struct cf_slot *slot, int new_state)
{
int i, ptr, len;
unsigned char buf[256];
 
if (new_state == CF_SLOT_STATE_Ready) {
if (slot->state == CF_SLOT_STATE_Inserted) {
assabet_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
do_delay(30); // At least 300 ms
slot->state = CF_SLOT_STATE_Powered;
assabet_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_ENABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(1); // At least 10 us
slot->state = CF_SLOT_STATE_Reset;
assabet_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(5); // At least 20 ms
// Wait until the card is ready to talk
for (i = 0; i < 10; i++) {
ptr = 0;
if (cf_get_CIS(slot, CF_CISTPL_VERS_1, buf, &len, &ptr)) {
slot->state = CF_SLOT_STATE_Ready;
break;
}
do_delay(10);
}
}
}
}
 
//
// Acknowledge interrupt (used in non-kernel environments)
//
void
cf_hwr_clear_interrupt(struct cf_slot *slot)
{
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
/arm/cerfpda/v2_0/cdl/pcmcia_cerfpda.cdl
0,0 → 1,66
# ====================================================================
#
# pcmcia_cerfpda.cdl
#
# PCMCIA (Compact Flash) - Hardware support on Intrinsyc CerfPDA
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): gthomas
# Original data: gthomas
# Contributors:
# Date: 2000-07-06
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
cdl_package CYGPKG_DEVS_PCMCIA_CERFPDA {
display "SA11x0/Cerfpda PCMCIA support"
 
parent CYGPKG_IO_PCMCIA
active_if CYGPKG_IO_PCMCIA
active_if CYGPKG_HAL_ARM_SA11X0_CERFPDA
 
implements CYGHWR_IO_PCMCIA_DEVICE
 
include_dir .
include_files ; # none _exported_ whatsoever
description "PCMCIA (Compact Flash) device support for SA11x0/Cerfpda"
compile cerfpda_pcmcia.c
}
 
/arm/cerfpda/v2_0/ChangeLog
0,0 → 1,39
2002-02-04 Gary Thomas <gthomas@redhat.com>
 
* src/cerfpda_pcmcia.c:
* cdl/pcmcia_cerfpda.cdl: New file(s) - port to Intrinsyc CerfPDA.
 
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
/arm/cerfpda/v2_0/src/cerfpda_pcmcia.c
0,0 → 1,272
//==========================================================================
//
// devs/pcmcia/cerfpda/cerfpda_pcmcia.c
//
// PCMCIA support (Card Services)
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// Date: 2000-07-06
// Purpose: PCMCIA support
// Description:
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/io_pcmcia.h>
 
#include <cyg/hal/hal_io.h> // IO macros
#include <cyg/hal/hal_arch.h> // Register state info
#include <cyg/hal/hal_intr.h> // HAL interrupt macros
#include <cyg/hal/drv_api.h>
 
#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h> // Configuration header
#include <cyg/kernel/kapi.h>
#endif
#include <cyg/hal/hal_if.h>
 
#include <cyg/io/pcmcia.h>
#include <cyg/infra/diag.h>
 
#include <cyg/hal/hal_sa11x0.h> // Board definitions
#include <cyg/hal/cerfpda.h>
 
#ifdef CYGPKG_KERNEL
static cyg_interrupt cf_detect_interrupt;
static cyg_handle_t cf_detect_interrupt_handle;
static cyg_interrupt cf_irq_interrupt;
static cyg_handle_t cf_irq_interrupt_handle;
 
// This ISR is called when a CompactFlash board is inserted
static int
cf_detect_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_interrupt_mask(SA1110_CF_DETECT);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the board insertion
static void
cf_detect_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
struct cf_slot *slot = (struct cf_slot *)data;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Removed; // Implies powered up, etc.
}
cyg_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_interrupt_unmask(SA1110_CF_DETECT);
}
 
// This ISR is called when the card interrupt occurs
static int
cf_irq_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_drv_interrupt_mask(SA1110_CF_IRQ);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the card interrupt
static void
cf_irq_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
struct cf_slot *slot = (struct cf_slot *)data;
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
cyg_bool was_ctrlc_int;
#endif
 
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
was_ctrlc_int = HAL_CTRLC_CHECK(vector, data);
if (!was_ctrlc_int) // Fall through and run normal code
#endif
// Process interrupt
(slot->irq_handler.handler)(vector, count, slot->irq_handler.param);
// Allow interrupts to happen again
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
}
#endif
 
//
// Fill in the details of a PCMCIA slot and initialize the device
//
void
cf_hwr_init(struct cf_slot *slot)
{
static int int_init = 0;
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if (!int_init) {
int_init = 1;
#ifdef CYGPKG_KERNEL
// Set up interrupts
cyg_drv_interrupt_create(SA1110_CF_DETECT,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_detect_isr,
(cyg_DSR_t *)cf_detect_dsr,
&cf_detect_interrupt_handle,
&cf_detect_interrupt);
cyg_drv_interrupt_attach(cf_detect_interrupt_handle);
cyg_drv_interrupt_configure(SA1110_CF_DETECT, true, true); // Detect either edge
cyg_drv_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_drv_interrupt_unmask(SA1110_CF_DETECT);
cyg_drv_interrupt_create(SA1110_CF_IRQ,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_irq_isr,
(cyg_DSR_t *)cf_irq_dsr,
&cf_irq_interrupt_handle,
&cf_irq_interrupt);
cyg_drv_interrupt_attach(cf_irq_interrupt_handle);
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
#endif
cyg_drv_interrupt_configure(SA1110_CF_IRQ, false, false); // Falling edge
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
slot->attr = (unsigned char *)0x38000000;
slot->attr_length = 0x200;
slot->io = (unsigned char *)0x30000000;
slot->io_length = 0x04000000;
slot->mem = (unsigned char *)0x3C000000;
slot->mem_length = 0x04000000;
slot->int_num = SA1110_CF_IRQ;
#ifdef CYG_HAL_STARTUP_ROM
// Disable CF bus & power (idle/off)
cerfpda_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_OFF |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
#endif
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
if ((_cerfpda_BCR & SA1110_BCR_CF_POWER) == SA1110_BCR_CF_POWER_ON) {
// Assume that the ROM environment has turned the bus on
slot->state = CF_SLOT_STATE_Ready;
} else {
slot->state = CF_SLOT_STATE_Inserted;
}
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
void
cf_hwr_poll(struct cf_slot *slot)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
static void
do_delay(int ticks)
{
#ifdef CYGPKG_KERNEL
cyg_thread_delay(ticks);
#else
CYGACC_CALL_IF_DELAY_US(10000*ticks);
#endif
}
 
//
// Transition the card/slot to a new state
// note: currently only supports transitions to Ready, Empty
//
bool
cf_hwr_change_state(struct cf_slot *slot, int new_state)
{
int i, ptr, len;
unsigned char buf[256];
 
if (new_state == CF_SLOT_STATE_Ready) {
if (slot->state == CF_SLOT_STATE_Inserted) {
cerfpda_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_OFF);
do_delay(30); // At least 300 ms
slot->state = CF_SLOT_STATE_Powered;
cerfpda_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_ENABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(1); // At least 10 us
slot->state = CF_SLOT_STATE_Reset;
cerfpda_BCR(SA1110_BCR_CF_POWER |
SA1110_BCR_CF_RESET |
SA1110_BCR_CF_BUS,
SA1110_BCR_CF_POWER_ON |
SA1110_BCR_CF_RESET_DISABLE |
SA1110_BCR_CF_BUS_ON);
do_delay(5); // At least 20 ms
// Wait until the card is ready to talk
for (i = 0; i < 10; i++) {
ptr = 0;
if (cf_get_CIS(slot, CF_CISTPL_VERS_1, buf, &len, &ptr)) {
slot->state = CF_SLOT_STATE_Ready;
break;
}
do_delay(10);
}
}
}
}
 
//
// Acknowledge interrupt (used in non-kernel environments)
//
void
cf_hwr_clear_interrupt(struct cf_slot *slot)
{
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}
/arm/ipaq/v2_0/cdl/pcmcia_ipaq.cdl
0,0 → 1,66
# ====================================================================
#
# pcmcia_ipaq.cdl
#
# PCMCIA (Compact Flash) - Hardware support on iPAQ
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): gthomas
# Original data: gthomas
# Contributors:
# Richard Panton <richard.panton@3glab.com>
# Date: 2001-02-24
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
cdl_package CYGPKG_DEVS_PCMCIA_IPAQ {
display "SA11x0/iPaq PCMCIA support"
 
parent CYGPKG_IO_PCMCIA
active_if CYGPKG_IO_PCMCIA
active_if CYGPKG_HAL_ARM_SA11X0_IPAQ
 
implements CYGHWR_IO_PCMCIA_DEVICE
 
include_dir .
include_files ; # none _exported_ whatsoever
description "PCMCIA (Compact Flash) device support for SA11x0/iPAQ"
compile ipaq_pcmcia.c
}
/arm/ipaq/v2_0/ChangeLog
0,0 → 1,63
2002-09-20 Gary Thomas <gthomas@ecoscentric.com>
 
* src/ipaq_pcmcia.c: Additional setup required for Compaq dual
PCMCIA sleeve. Add card reset which is necessary for some older cards.
2002-04-12 Gary Thomas <gthomas@redhat.com>
 
* src/ipaq_pcmcia.c: Clean up warnings.
 
2001-07-13 Gary Thomas <gthomas@redhat.com>
 
* src/ipaq_pcmcia.c (cf_hwr_change_state): Use VERS_1 instead of
MANID since some cards don't seem to support that.
 
2001-03-14 Gary Thomas <gthomas@redhat.com>
 
* src/ipaq_pcmcia.c (cf_hwr_init): Leave GPIO/timing setup to HAL code.
 
2001-03-01 Gary Thomas <gthomas@redhat.com>
 
* src/ipaq_pcmcia.c (cf_hwr_init): Remove [illegal] delay which caused
this code to be unreliable when run in non-ROM mode.
 
2001-02-24 Gary Thomas <gthomas@redhat.com>
 
* src/ipaq_pcmcia.c:
* cdl/pcmcia_ipaq.cdl: New file(s) - initial import of
iPAQ support, contributed by Richard Panton, 3G Labs.
 
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================
/arm/ipaq/v2_0/src/ipaq_pcmcia.c
0,0 → 1,271
//==========================================================================
//
// devs/pcmcia/ipaq/ipaq_pcmcia.c
//
// PCMCIA support (Card Services)
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
// Copyright (C) 2002 Gary Thomas
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): gthomas
// Contributors: gthomas
// richard.panton@3glab.com
// Date: 2001-02-24
// Purpose: PCMCIA support
// Description:
//
//####DESCRIPTIONEND####
//
//==========================================================================
 
#include <pkgconf/io_pcmcia.h>
 
#include <cyg/hal/hal_io.h> // IO macros
#include <cyg/hal/hal_arch.h> // Register state info
#include <cyg/hal/hal_intr.h> // HAL interrupt macros
#include <cyg/hal/drv_api.h>
 
#ifdef CYGPKG_KERNEL
#include <pkgconf/kernel.h> // Configuration header
#include <cyg/kernel/kapi.h>
#endif
#include <cyg/hal/hal_if.h>
 
#include <cyg/io/pcmcia.h>
#include <cyg/infra/diag.h>
 
#include <cyg/hal/hal_sa11x0.h> // Board definitions
#include <cyg/hal/ipaq.h>
 
#ifdef CYGPKG_KERNEL
static cyg_interrupt cf_detect_interrupt;
static cyg_handle_t cf_detect_interrupt_handle;
static cyg_interrupt cf_irq_interrupt;
static cyg_handle_t cf_irq_interrupt_handle;
 
// This ISR is called when a CompactFlash board is inserted
static int
cf_detect_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_drv_interrupt_mask(SA1110_CF_DETECT);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the board insertion
static void
cf_detect_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
struct cf_slot *slot = (struct cf_slot *)data;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Removed; // Implies powered up, etc.
}
cyg_drv_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_drv_interrupt_unmask(SA1110_CF_DETECT);
}
 
// This ISR is called when the card interrupt occurs
static int
cf_irq_isr(cyg_vector_t vector, cyg_addrword_t data, HAL_SavedRegisters *regs)
{
cyg_drv_interrupt_mask(SA1110_CF_IRQ);
return (CYG_ISR_HANDLED|CYG_ISR_CALL_DSR); // Run the DSR
}
 
// This DSR handles the card interrupt
static void
cf_irq_dsr(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data)
{
struct cf_slot *slot = (struct cf_slot *)data;
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
cyg_bool was_ctrlc_int;
#endif
 
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
#if defined(CYGDBG_HAL_DEBUG_GDB_CTRLC_SUPPORT)
was_ctrlc_int = HAL_CTRLC_CHECK(vector, data);
if (!was_ctrlc_int) // Fall through and run normal code
#endif
// Process interrupt
(slot->irq_handler.handler)(vector, count, slot->irq_handler.param);
// Allow interrupts to happen again
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
}
#endif
 
static void
do_delay(int ticks)
{
#ifdef CYGPKG_KERNEL
cyg_thread_delay(ticks);
#else
CYGACC_CALL_IF_DELAY_US(10000*ticks);
#endif
}
 
//
// Fill in the details of a PCMCIA slot and initialize the device
//
void
cf_hwr_init(struct cf_slot *slot)
{
static int int_init = 0;
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
 
if (!int_init) {
int_init = 1;
#ifdef CYGPKG_KERNEL
// Set up interrupts
cyg_drv_interrupt_create(SA1110_CF_DETECT,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_detect_isr,
(cyg_DSR_t *)cf_detect_dsr,
&cf_detect_interrupt_handle,
&cf_detect_interrupt);
cyg_drv_interrupt_attach(cf_detect_interrupt_handle);
cyg_drv_interrupt_configure(SA1110_CF_DETECT, true, true); // Detect either edge
cyg_drv_interrupt_acknowledge(SA1110_CF_DETECT);
cyg_drv_interrupt_unmask(SA1110_CF_DETECT);
 
cyg_drv_interrupt_create(SA1110_CF_IRQ,
99, // Priority - what goes here?
(cyg_addrword_t) slot, // Data item passed to interrupt handler
(cyg_ISR_t *)cf_irq_isr,
(cyg_DSR_t *)cf_irq_dsr,
&cf_irq_interrupt_handle,
&cf_irq_interrupt);
cyg_drv_interrupt_attach(cf_irq_interrupt_handle);
cyg_drv_interrupt_unmask(SA1110_CF_IRQ);
cyg_drv_interrupt_configure(SA1110_CF_IRQ, false, false); // Falling edge
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
#endif
}
slot->attr = (unsigned char *)0x28000000;
slot->attr_length = 0x200;
slot->io = (unsigned char *)0x20000000;
slot->io_length = 0x04000000;
slot->mem = (unsigned char *)0x2C000000;
slot->mem_length = 0x04000000;
slot->int_num = SA1110_CF_IRQ;
#ifdef CYG_HAL_STARTUP_ROM
// Disable CF bus & power (idle/off)
ipaq_EGPIO( SA1110_EIO_OPT_PWR | SA1110_EIO_OPT | SA1110_EIO_CF_RESET,
SA1110_EIO_OPT_PWR_ON | SA1110_EIO_OPT_ON | SA1110_EIO_CF_RESET_ENABLE );
#endif
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
if ((_ipaq_EGPIO & SA1110_EIO_OPT_PWR) == SA1110_EIO_OPT_PWR_ON) {
// Assume that the ROM environment has turned the bus on
slot->state = CF_SLOT_STATE_Ready;
} else {
slot->state = CF_SLOT_STATE_Inserted;
}
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
void
cf_hwr_poll(struct cf_slot *slot)
{
unsigned long new_state = *SA11X0_GPIO_PIN_LEVEL;
if ((new_state & SA1110_GPIO_CF_DETECT) == SA1110_GPIO_CF_PRESENT) {
slot->state = CF_SLOT_STATE_Inserted;
} else {
slot->state = CF_SLOT_STATE_Empty;
}
}
 
//
// Transition the card/slot to a new state
// note: currently only supports transitions to Ready, Empty
//
void
cf_hwr_change_state(struct cf_slot *slot, int new_state)
{
int i, ptr, len;
unsigned char buf[256];
 
if (new_state == CF_SLOT_STATE_Ready) {
if (slot->state == CF_SLOT_STATE_Inserted) {
ipaq_EGPIO( SA1110_EIO_OPT_PWR | SA1110_EIO_OPT | SA1110_EIO_CF_RESET,
SA1110_EIO_OPT_PWR_ON | SA1110_EIO_OPT_ON | SA1110_EIO_CF_RESET_DISABLE);
do_delay(30); // At least 300 ms
slot->state = CF_SLOT_STATE_Powered;
ipaq_EGPIO( SA1110_EIO_CF_RESET, SA1110_EIO_CF_RESET_ENABLE);
*(volatile unsigned short *)IPAQ_CF_CTRL = IPAQ_CF_CTRL_V5_DISABLE |
IPAQ_CF_CTRL_V3_ENABLE |
IPAQ_CF_CTRL_RESET_ENABLE |
IPAQ_CF_CTRL_APOE_ENABLE |
IPAQ_CF_CTRL_SOE_ENABLE;
do_delay(1); // At least 10 us
slot->state = CF_SLOT_STATE_Reset;
ipaq_EGPIO( SA1110_EIO_CF_RESET, SA1110_EIO_CF_RESET_DISABLE);
do_delay(5); // At least 20 ms
// This is necessary for the two slot sleeve and doesn't seem to
// hurt on the single slot versions. Note: only 3.3V is ever used!
*(volatile unsigned short *)IPAQ_CF_CTRL = IPAQ_CF_CTRL_V5_DISABLE |
IPAQ_CF_CTRL_V3_ENABLE |
IPAQ_CF_CTRL_RESET_DISABLE |
IPAQ_CF_CTRL_APOE_ENABLE |
IPAQ_CF_CTRL_SOE_ENABLE;
do_delay(5); // At least 20 ms
// Wait until the card is ready to talk
for (i = 0; i < 10; i++) {
ptr = 0;
if (cf_get_CIS(slot, CF_CISTPL_VERS_1, buf, &len, &ptr)) {
slot->state = CF_SLOT_STATE_Ready;
break;
}
do_delay(10);
}
}
}
}
 
//
// Acknowledge interrupt (used in non-kernel environments)
//
void
cf_hwr_clear_interrupt(struct cf_slot *slot)
{
// Clear interrupt [edge indication]
cyg_drv_interrupt_acknowledge(SA1110_CF_IRQ);
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.