URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk/rtos/ecos-2.0/packages/devs/serial/sparclite
- from Rev 27 to Rev 174
- ↔ Reverse comparison
Rev 27 → Rev 174
/sleb/v2_0/cdl/ser_sparclite_sleb.cdl
0,0 → 1,210
# ==================================================================== |
# |
# ser_sparclite_sleb.cdl |
# |
# eCos serial SPARClite/SLEB configuration data |
# |
# ==================================================================== |
#####ECOSGPLCOPYRIGHTBEGIN#### |
## ------------------------------------------- |
## This file is part of eCos, the Embedded Configurable Operating System. |
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
## |
## eCos is free software; you can redistribute it and/or modify it under |
## the terms of the GNU General Public License as published by the Free |
## Software Foundation; either version 2 or (at your option) any later version. |
## |
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
## WARRANTY; without even the implied warranty of MERCHANTABILITY or |
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
## for more details. |
## |
## You should have received a copy of the GNU General Public License along |
## with eCos; if not, write to the Free Software Foundation, Inc., |
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
## |
## As a special exception, if other files instantiate templates or use macros |
## or inline functions from this file, or you compile this file and link it |
## with other works to produce a work based on this file, this file does not |
## by itself cause the resulting work to be covered by the GNU General Public |
## License. However the source code for this file must still be made available |
## in accordance with section (3) of the GNU General Public License. |
## |
## This exception does not invalidate any other reasons why a work based on |
## this file might be covered by the GNU General Public License. |
## |
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
## at http://sources.redhat.com/ecos/ecos-license/ |
## ------------------------------------------- |
#####ECOSGPLCOPYRIGHTEND#### |
# ==================================================================== |
######DESCRIPTIONBEGIN#### |
# |
# Author(s): jskov |
# Original data: gthomas |
# Contributors: |
# Date: 1999-07-14 |
# |
#####DESCRIPTIONEND#### |
# |
# ==================================================================== |
|
cdl_package CYGPKG_IO_SERIAL_SPARCLITE_SLEB { |
display "SPARClite SLEB serial device drivers" |
|
parent CYGPKG_IO_SERIAL_DEVICES |
active_if CYGPKG_IO_SERIAL |
active_if CYGPKG_HAL_SPARCLITE_SLEB |
|
requires CYGPKG_ERROR |
include_dir cyg/io |
include_files ; # none _exported_ whatsoever |
description " |
This option enables the serial device drivers for the |
SPARClite SLEB." |
|
compile -library=libextras.a sleb_sdtr.c |
|
define_proc { |
puts $::cdl_system_header "/***** serial driver proc output start *****/" |
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_DEVICE_HEADER <pkgconf/io_serial_sparclite_sleb.h>" |
puts $::cdl_system_header "/***** serial driver proc output end *****/" |
} |
|
cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 { |
display "SPARClite SLEB serial CON1 port driver" |
flavor bool |
default_value 1 |
description " |
This option includes the serial device driver for the SPARClite |
SLEB CON1 port." |
|
cdl_option CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON1_NAME { |
display "Device name for SPARClite SLEB serial CON1 port" |
flavor data |
default_value {"\"/dev/ser0\""} |
description " |
This option specifies the device name for the SPARClite SLEB |
CON1 port." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BAUD { |
display "Baud rate for the SPARClite SLEB serial CON1 driver" |
flavor data |
legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 |
4800 7200 9600 14400 19200 38400 57600 115200 230400 |
} |
default_value 19200 |
description " |
This option specifies the default baud rate (speed) for the |
SPARClite SLEB CON1." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE { |
display "Buffer size for the SPARClite SLEB serial CON1 driver" |
flavor data |
legal_values 0 to 8192 |
default_value 128 |
description " |
This option specifies the size of the internal buffers used for |
the SPARClite SLEB CON1." |
} |
} |
cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 { |
display "SPARClite SLEB serial CON2 port driver" |
flavor bool |
default_value 1 |
description " |
This option includes the serial device driver for the SPARClite |
SLEB CON2 port." |
|
cdl_option CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON2_NAME { |
display "Device name for SPARClite SLEB serial CON2 port" |
flavor data |
default_value {"\"/dev/ser1\""} |
description " |
This option specifies the device name for the SPARClite SLEB |
CON2 port." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BAUD { |
display "Baud rate for the SPARClite SLEB serial CON2 driver" |
flavor data |
legal_values { 50 75 110 "134_5" 150 200 300 600 1200 1800 2400 3600 |
4800 7200 9600 14400 19200 38400 57600 115200 230400 |
} |
default_value 19200 |
description " |
This option specifies the default baud rate (speed) for the |
SPARClite SLEB CON2." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE { |
display "Buffer size for the SPARClite SLEB serial CON2 driver" |
flavor data |
legal_values 0 to 8192 |
default_value 128 |
description " |
This option specifies the size of the internal buffers used for |
the SPARClite SLEB CON2." |
} |
} |
|
cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_OPTIONS { |
display "Serial device driver build options" |
flavor none |
description " |
Package specific build options including control over |
compiler flags used only in building this package, |
and details of which tests are built." |
|
|
cdl_option CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CFLAGS_ADD { |
display "Additional compiler flags" |
flavor data |
no_define |
default_value { "" } |
description " |
This option modifies the set of compiler flags for |
building these serial device drivers. These flags are used in addition |
to the set of global flags." |
} |
|
cdl_option CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CFLAGS_REMOVE { |
display "Suppressed compiler flags" |
flavor data |
no_define |
default_value { "" } |
description " |
This option modifies the set of compiler flags for |
building these serial device drivers. These flags are removed from |
the set of global flags if present." |
} |
} |
|
cdl_component CYGPKG_IO_SERIAL_SPARCLITE_SLEB_TESTING { |
display "Testing parameters" |
flavor bool |
calculated 1 |
active_if CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 |
|
implements CYGINT_IO_SERIAL_TEST_SKIP_38400 |
implements CYGINT_IO_SERIAL_TEST_SKIP_57600 |
implements CYGINT_IO_SERIAL_TEST_SKIP_115200 |
|
cdl_option CYGPRI_SER_TEST_SER_DEV { |
display "Serial device used for testing" |
flavor data |
default_value { CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON1_NAME } |
} |
|
define_proc { |
puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"sparcl\"" |
puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV \"/dev/tty0\"" |
puts $::cdl_header "#define CYGPRI_SER_TEST_OVERRIDE_INT_1 CYGNUM_HAL_INTERRUPT_9" |
puts $::cdl_header "#define CYGPRI_SER_TEST_OVERRIDE_INT_2 CYGNUM_HAL_INTERRUPT_10" |
} |
} |
} |
|
# EOF ser_sparclite_sleb.cdl |
/sleb/v2_0/ChangeLog
0,0 → 1,1198
2003-02-24 Jonathan Larmour <jifl@eCosCentric.com> |
|
* cdl/ser_sparclite_sleb.cdl: Remove irrelevant doc link. |
|
2001-09-10 Jonathan Larmour <jlarmour@redhat.com> |
|
* cdl/ser_sparclite_sleb.cdl: |
Fix 234000->230400 typo. |
|
2000-10-12 Jesper Skov <jskov@redhat.com> |
|
* cdl/ser_sparclite_sleb.cdl: Moved testing parameters here. |
|
* src/sleb_sdtr.c: Removed obsolete sleb_sdtr_set_config function. |
|
2000-08-01 Jonathan Larmour <jlarmour@redhat.co.uk> |
|
* src/sleb_sdtr.c (sleb_sdtr_set_config): Now use keys to make |
more flexible. |
|
2000-06-22 Hugo Tyson <hmt@cygnus.co.uk> |
|
* cdl/<yournamehere>.cdl: Remove the comment on the empty |
include_files directive; the tools now support this correctly. |
This keeps internal include files internal. |
|
2000-04-11 Hugo Tyson <hmt@cygnus.co.uk> |
|
* cdl/ser_sparclite_sleb.cdl: Change the parent from CYGPKG_IO_SERIAL |
(which is enabled most of the time) to CYGPKG_IO_SERIAL_DEVICES |
(which is not...) thus allowing convenient control independent of |
platform. Also enable all individual devices by default, now, so |
that they can be enabled simply by enabling the above new parent. |
|
2000-04-07 Hugo Tyson <hmt@cygnus.co.uk> |
|
* ecos.db: Re-organize device packages. This is a massive change |
involving deleting all the sources for serial and ethernet drivers |
from where they used to live in |
packages/io/serial/current/src/ARCH/PLATFORM.[ch] |
packages/net/drivers/eth/PLATFORM/current/src/... |
and reinstating them in |
packages/devs/serial/ARCH/PLATFORM/current/src/... |
packages/devs/eth/ARCH/PLATFORM/current/src/... |
|
All these new packages are properly defined in ecos.db, and are |
all of type "hardware" so that a "target" can grab them. |
|
This directory layout is descriptive of the devices we have right |
now, arch and platform are separate levels just to make it easier |
to navigate in the filesystem and similar to the HAL structure in |
the filesystem. |
|
It is *not* prescriptive of future work; for example, the mythical |
common highly-portable 16550 serial driver which works on many |
targets would be called "devs/serial/s16550/current", or a serial |
device for a particular board (cogent springs to mind) that can |
work with different CPUs fitted is "devs/serial/cogent/current". |
|
Changelogs have been preserved and replicated over all the new |
packages, so that no history is lost. |
|
The contents of individual source files are unchanged; they build |
in just the same emvironment except for a very few cases where the |
config file name changed in this movement. |
|
Targets in ecos.db have been redefined to bring in all relevant |
hardware packages including net and serial drivers (but the newly |
included packages are only active if their desired parent is |
available.) |
|
The names of CDL options (and their #defines of course) stay the |
same for the serial drivers, for backward compatibility. |
|
* templates/*/current.ect: these have had CYGPKG_IO_SERIAL added |
rather than it being in (almost) all target definitions. |
|
2000-04-05 Jonathan Larmour <jlarmour@redhat.co.uk> |
|
* src/common/tty.c (tty_read): CRLF conversion should use \r\n not \n\r |
(tty_write): Similarly |
|
* include/ttyio.h: Update CYG_TTY_IN_FLAGS_CRLF and |
CYG_TTY_IN_FLAGS_CRLF to match |
|
2000-03-31 Jesper Skov <jskov@redhat.com> |
|
* cdl/ser_sh_edk7708.cdl: Limit legal baud rate range. |
* src/sh/sh_sci_serial.c: Use baud rate macro instead of hardwired |
constants. |
|
2000-03-28 John Dallaway <jld@cygnus.co.uk> |
|
* cdl/io_serial.cdl, |
cdl/ser_arm_aeb.cdl, |
cdl/ser_arm_cma230.cdl, |
cdl/ser_arm_edb7xxx.cdl, |
cdl/ser_arm_pid.cdl, |
cdl/ser_i386_pc.cdl, |
cdl/ser_mips_jmr3904.cdl, |
cdl/ser_mips_vrc4373.cdl, |
cdl/ser_mn10300.cdl, |
cdl/ser_powerpc_cogent.cdl, |
cdl/ser_quicc_smc.cdl, |
cdl/ser_sh_edk7708.cdl, |
cdl/ser_sparclite_sleb.cdl, |
cdl/tty.cdl: |
|
Adjust documentation URLs. |
|
2000-03-07 Jesper Skov <jskov@redhat.com> |
|
* cdl/ser_mips_jmr3904.cdl: Rename devices to match CDL naming. |
|
2000-02-29 Jonathan Larmour <jlarmour@redhat.co.uk> |
|
* include/serialio.h: Correct baud rate typo: 230400 rather than |
234000. Thanks to Grant Edwards for the report. |
|
2000-02-28 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/powerpc/quicc_smc_serial.c: Use standard 'diag_dump_buf()'. |
|
2000-02-28 Jesper Skov <jskov@redhat.com> |
|
* tests/ser_test_protocol.inl: Allow 115200 baud on Cogent |
again. Fixed interrupt problem. |
|
2000-02-22 Jesper Skov <jskov@redhat.com> |
|
* tests/ser_test_protocol.inl: Don't use 115200 baud on |
Cogent. Our slower boards can't keep up. |
|
2000-02-17 Gary Thomas <gthomas@cygnus.co.uk> |
|
* cdl/ser_powerpc_cogent.cdl: Fix incorrect dependency. |
|
2000-02-16 Nick Garnett <nickg@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: |
Added configury for PC serial device drivers. |
|
* cdl/ser_i386_pc.cdl: |
* src/i386/pc_serial.c: |
* src/i386/pc_serial.h: |
Added these files to implement PC serial line drivers. |
|
* cdl/io_serial.cdl: |
Added CYGPKG_IO_SERIAL_I386_PC. |
|
* tests/ser_test_protocol.inl: |
Added support for PC serial line testing. |
|
2000-02-11 Jesper Skov <jskov@redhat.com> |
|
* src/sh/sh_sci_7708.inl (DEVTAB_ENTRY): |
* src/sparclite/sleb_sdtr.c: |
serial_devio => cyg_io_serial_devio |
|
2000-02-10 Jonathan Larmour <jlarmour@redhat.co.uk> |
|
* src/mn10300/mn10300_serial.c: Ensure all CYG_HAL_MN10300_* |
preprocessor conditionals use the correct CYGPKG_HAL_MN10300_AM3* form |
now. |
|
2000-02-03 Jesper Skov <jskov@redhat.com> |
|
* src/powerpc/quicc_smc_serial.c: CYG_HAL_POWERPC_x->CYGPKG_... |
|
2000-02-02 Jonathan Larmour <jlarmour@redhat.co.uk> |
|
* src/arm/aeb_serial.h: Rename lower case register macros to REG_ upper |
case macros |
|
* src/arm/aeb_serial.c: Update to reflect above |
|
2000-01-31 Simon FitzMaurice <sdf@cygnus.co.uk> |
* cdl/*.cdl: |
|
Adjust help URLs in line with new doc layout. |
|
2000-01-28 Simon FitzMaurice <sdf@cygnus.co.uk> |
* cdl/*.cdl: |
|
Adjust help URLs in line with new doc layout. |
|
2000-01-28 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/common/tty.c (tty_read): Fix problem with backspace at start |
of line (size must be 'signed' for compare to work). |
|
2000-01-19 Hugo Tyson <hmt@cygnus.co.uk> |
|
* cdl/*.cdl: Add descriptions to a number of options &c which were |
lacking same, also tidied up other typos as noticed en passant. |
|
2000-01-17 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/common/tty.c (tty_read): Avoid echoing "backspace/erase" at |
start of line. |
|
2000-01-05 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/common/serial.c (serial_write): Avoid potential deadlock if |
transmit start actually sends enough characters to signal cond wait. |
|
2000-01-03 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/serial.h: Fix namespace pollution - |
serial_devio => cyg_io_serial_devio |
serial_callbacks => cyg_io_serial_callbacks |
|
* src/mips/tx3904_serial.c: |
* src/mips/vrc4373_serial.c: |
* src/mn10300/mn10300_serial.c: |
* src/powerpc/quicc_smc_serial.c: |
* src/powerpc/cogent_serial_with_ints.c: |
* src/sparclite/sleb_sdtr.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: |
* src/arm/edb7xxx_serial.c: |
* src/arm/cma230_serial.c: |
* src/arm/ebsa285_serial.c: |
* src/common/haldiag.c: |
* src/common/serial.c: Fix namespace pollution - |
serial_devio => cyg_io_serial_devio |
|
1999-12-06 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Add loop to handle |
case where an interrupt represents multiple events. |
|
1999-11-19 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/powerpc/quicc_smc_serial.c: Channel select for SMC2 was wrong. |
|
1999-11-18 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Remove mention of 7209/7212. |
|
1999-11-03 John Dallaway <jld@cygnus.co.uk> |
|
* cdl/io_serial.cdl: Define build options. |
|
1999-10-26 Jesper Skov <jskov@cygnus.co.uk> |
* tests/serial5.c (serial_test): Reduce speed in thumb mode. |
|
* src/arm/pid_serial.h: Added BE support. |
|
* src/PKGconf.mak: Use CYGPKG_<> instead of CYG_<> to control what |
needs to be compiled. |
|
1999-10-25 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/pid_serial.h (ISR_RxTO): Define - character received but |
not handled "promptly". |
|
* src/arm/pid_serial_with_ints.c (pid_serial_DSR): Handle rcv interrupts |
properly (can't ignore them even with TO bit set). |
|
* src/arm/cl7211_serial.c (cl7211_serial_rx_DSR): Need to handle all |
input (empty input FIFO) otherwise characters get dropped. |
|
1999-10-15 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Removed AEB rev C change. Was bogus. |
|
1999-10-11 Nick Garnett <nickg@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added configury for VR4300 testing. |
|
* src/mips/vrc4373_serial.c: Added Bi-endian support. |
|
* include/pkgconf/io_serial.h: Adjusted default baud rates to |
38400. |
|
1999-10-06 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Run tests on AEB rev C as well. |
|
1999-09-28 Hugo Tyson <hmt@cygnus.co.uk> |
|
* src/powerpc/quicc_smc_serial.c (quicc_smc_serial_init): Correct |
value supplied for interrupt priority - it may be unused, but it |
is asserted for range. Initialize the diagnostic channel if on an |
MBX and if NOT using SMC1 ourselves, to ensure that diag output |
and built-in stubs work correctly; otherwise reset the quicc and |
ignore SMC1 as before. Fix various warnings, mostly about |
casting/arg-passing/assigning away volatile. |
|
1999-08-31 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Define dummy crash ID. |
|
1999-08-30 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added crash information which |
should help track down repeating errors. |
|
1999-08-20 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/README: Added. |
|
1999-08-18 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/tty1.c: |
* tests/tty2.c: |
* tests/serial1.c: |
* tests/serial2.c: |
* tests/serial3.c: |
* tests/serial4.c: |
* tests/serial5.c: |
* tests/PKGconf.mak: |
Require kernel and kernel C API. |
|
1999-08-17 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c: Added a simple implementation of a |
receive FIFO to try and reduce the overhead of receiving bytes. |
|
1999-08-16 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* src/PKGconf.mak: |
* src/mn10300/mn10300_serial.c: |
* tests/ser_test_protocol.inl: |
Rename all am32 -> am31 |
|
1999-08-12 Nick Garnett <nickg@cygnus.co.uk> |
|
Imported following changes from development branch: |
|
1999-08-11 Nick Garnett <nickg@cygnus.co.uk> |
|
* tests/serial5.c: Modified config test for boards that need a lower |
speed for this test. |
|
* tests/ser_test_protocol.inl: Removed 14400 baud tests for all |
MN10300 variants. The MN10300 cannot currently do this speed. |
|
* src/mn10300/mn10300_serial.c: Tidied up the transmit interrupt |
enable/disable code to be variant specific. |
|
* include/pkgconf/io_serial.h: Undid Jonathan's change, since the |
same options are used for all MN10300 variants. |
|
1999-08-10 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: |
Reparent CYGPKG_IO_SERIAL_MN10300 from under CYGPKG_HAL_MN10300 to |
CYGPKG_HAL_MN10300_AM32_STDEVAL1 since it's stdeval1 specific |
|
1999-08-04 Nick Garnett <nickg@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: |
Changed names of MN10300 defines tested. Added AM33 definitions. |
|
* src/mn10300/mn10300_serial.c: |
Modified driver to work on am33 too. This simply requires some |
alternate definitions of things like register addresses and some |
bits in them plus some extra parameterization of some register |
values. |
|
* src/PKGconf.mak: |
Added am33 to list of architectures supporting serial lines. |
|
1999-07-28 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Update descriptions to be more |
generic (CL7x11 instead of CL7211). |
|
1999-07-28 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Correct typos in CDL description |
for serial port 2 driver |
|
1999-07-26 Hugo Tyson <hmt@cygnus.co.uk> |
|
* src/arm/ebsa285_serial.c: New file: device driver for the serial |
device of the Intel StrongARM EBSA-285 evaluation board. |
|
* include/pkgconf/io_serial.h (CYGPKG_IO_SERIAL_ARM_EBSA285): |
Config for it. |
|
* src/PKGconf.mak (EXTRAS_COMPILE): Compile it. |
|
* tests/ser_test_protocol.inl (TEST_SER_DEV): Enable testing of it. |
|
1999-07-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl (change_config): Changed implementation. |
|
1999-06-27 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/powerpc/quicc_smc_serial.c (quicc_smc_serial_init): More robust |
initialization, with data cache disabled. This seems to fix the |
random failures described below. |
|
* tests/ser_test_protocol.inl: Add configuration for QUICC/MBX860. |
Added some delays in the configuration change code to make QUICC |
happy [didn't help much although the manual says they are required]. |
|
* src/powerpc/quicc_smc_serial.h (UART_BITRATE): Rewrote macro to |
match what the Linux driver uses - still doesn't work well, though. |
|
* src/powerpc/quicc_smc_serial.c: Lots of changes trying to get the |
serial driver working and robust. At this point it works quite well, |
using the default buffer sizes. Changing from the defaults seem to |
easily break it though, certainly on input. Also, changing the baud |
rate seems to not work reliably. |
|
* src/common/serial.c: Add some tracing/debug info to try and debug |
problems with QUICC serial driver. These are hard disabled with |
"XX_" prepended to "CYGDBG_DIAG_BUF". Enabling them gives information |
about how/when data are delivered from the serial driver. |
|
* include/pkgconf/io_serial.h: Adjust limits and defaults on number and |
size of buffers with values that seem to work. |
|
1999-06-21 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/sh/sh_sci_serial.c: Rearranged inclusion of .inl file a bit |
to avoid compiler warnings. |
|
1999-06-21 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Fix CDL for number of buffers. |
|
* src/powerpc/quicc_smc_serial.c: Force number of buffers = 1. |
|
1999-06-20 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Some clean up (removed commented |
obsolete CDL parenting structure). |
Add support for Motorola PowerPC QUICC/SMC. |
|
* src/arm/cma230_serial.c: |
* src/arm/cl7211_serial.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: Use #include to get 'diag_printf()' |
prototypes. |
|
1999-06-17 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/cl7211_serial.c (cl7211_serial_start_xmit): Fix race which |
cause xmitter to get stuck. |
|
1999-06-16 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/sh/sh_serial.c: [removed] |
* src/sh/sh_sci_serial.c: [added] |
* src/sh/sh_sci_7708.inl: [added] |
* include/pkgconf/io_serial.h: |
* src/PKGconf.mak (EXTRAS_COMPILE): |
* tests/ser_test_protocol.inl: |
Renamed CDL options and restructered driver. |
Fixed CDL typo. |
|
1999-06-04 Jesper Skov <jskov@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Fixed CDL string for BAUD rate option. |
|
1999-06-04 Gary Thomas <gthomas@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Disable testing at 115200 |
for Cogent CMA230 (ARM). |
|
* src/arm/cma230_serial.c: Fix interrupt for port B. |
|
1999-05-31 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/sh/sh_serial.c: Fixed receive interrupts and added handler for |
error interrupts. |
|
1999-05-28 Jesper Skov <jskov@cygnus.co.uk> |
|
* io/serial/current/src/PKGconf.mak: |
* io/serial/current/tests/ser_test_protocol.inl: |
* include/pkgconf/io_serial.h: |
Renamed SH platform package to edk7708. |
|
1999-05-27 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added ability to change options in |
host software. |
|
1999-05-27 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c (mn10300_serial_config_port): |
Wait for the serial device to become acquiescent before disabling |
it. This prevents cygmon's outgoing characters getting corrupted |
due to transmission being disabled. |
Fix for PR 20047 |
|
1999-05-26 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: |
* tests/ser_test_protocol.inl: Add Cogent CMA230 setup. |
|
* src/arm/cma230_serial.c: Make names compatible with Cogent |
PowerPC board. |
|
1999-05-26 Gary Thomas <gthomas@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Add Cirrus Logic CL7211 setup. |
1999-05-26 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/sh/sh_serial.c: Added more baud rate values. Disabled |
interrupt driven receive. Fixed config_port to enable proper |
interrupt flags. |
|
1999-05-25 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: |
Change all mentions of CYGPKG_HAL_TX39_JMR3904 to |
CYGPKG_HAL_MIPS_TX39_JMR3904 |
|
1999-05-25 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* src/PKGconf.mak (EXTRAS_COMPILE): Change CYG_HAL_TX39 to |
CYG_HAL_MIPS_TX39 |
1999-05-25 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added sh entry. |
|
1999-05-24 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/PKGconf.mak: |
* include/pkgconf/io_serial.h: |
* src/sh/sh_serial.c: |
Added sh driver. |
|
1999-05-18 Jesper Skov <jskov@cygnus.co.uk> |
PR 19926 |
* src/sparclite/sleb_sdtr.c (sleb_sdtr_rx_DSR): Only read chan if |
there is one. |
|
1999-05-18 Jesper Skov <jskov@cygnus.co.uk> |
PR 19926 |
* src/arm/cl7211_serial.c (cl7211_serial_rx_DSR): Only read char |
if there is one. |
|
1999-05-16 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/cl7211_serial.c: Clean up, first working version. |
|
1999-05-14 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Removed workaround for spurious |
Cogent reads. |
|
* src/arm/aeb_serial.c: |
* src/arm/aeb_serial.h: |
* src/arm/pid_serial_with_ints.c: |
* src/arm/pid_serial.h: |
* src/powerpc/cogent_serial.h: |
* src/powerpc/cogent_serial_with_ints.c: |
Check for receive interrupt before reading. |
|
1999-05-13 Nick Garnett <nickg@cygnus.co.uk> |
|
The follow changes were made in a branch an have now been merged: |
|
1999-04-21 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/mips/vrc4373_serial.c: Small changes to get working with |
interrupts. |
|
1999-04-20 John Dallaway <jld@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Fix CYGPKG_IO_SERIAL_TX39_JMR3904 |
parent attribute. |
|
1999-05-11 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/cl7211_serial.c: Fix compile problems from merged code. |
|
1999-05-05 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Tidied up a bit and added |
description of protocol. |
|
1999-05-05 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/common/serial.c (serial_write, serial_read): Clear abort |
flag at entry. |
|
1999-05-05 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/serial4.c (serial_test): Handle config fails correctly. |
|
* tests/ser_test_protocol.inl: Better change_config |
handling. Simple recovery and negotiation isn't timing |
dependant. |
|
1999-05-05 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/timeout.inl: Updated with the below changes. |
|
1999-05-05 Gary Thomas <gthomas@cygnus.co.uk> |
|
* misc/timeout.inl (timeout): Timeouts are relative, but alarms |
need absolute time values. |
|
1999-05-04 Jesper Skov <jskov@cygnus.co.uk> |
PR 20018 |
* tests/serial1.c (serial_test): Always PASS, regardless of |
configuration. |
|
1999-05-04 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Reverse order of configurations - |
run tests with slow baud rate first. |
Only check CYG_KERNEL_DIAG_GDB_SERIAL_DIRECT for SLEB on RAM startup. |
|
1999-05-04 Jesper Skov <jskov@cygnus.co.uk> |
* src/mn10300/mn10300_serial.c: |
Use interrupt enable/disable feature of serial port2 to allow |
coexistence with CygMon/hal_diag. |
|
* tests/ser_test_protocol.inl: Use port2 for MN10300. |
|
1999-04-28 Bart Veer <bartv@cygnus.co.uk> |
|
* src/PKGconf.mak (EXTRAS_COMPILE): |
Use the new rules for generating libextras.a |
|
1999-04-26 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Add support for Cirrus Logic CL7211. |
|
|
1999-04-20 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: Fix default baud rate if unbuffered. |
1999-04-20 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added some comments. Disabled 38400 |
for SLEB. Only run test on SLEB if CygMon isn't used for diag |
output. |
|
1999-04-15 Jesper Skov <jskov@cygnus.co.uk> |
PR 19752 |
* tests/serial3.c: |
* tests/serial5.c: |
Run these tests at a lower baud rate on ARM AEB. |
|
1999-04-14 Jesper Skov <jskov@cygnus.co.uk> |
PR 19839 |
* src/mn10300/mn10300_serial.c: |
Fix compiler warnings. |
|
1999-04-14 Bart Veer <bartv@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: |
Reparent the board-specific serial devices below the actual boards. |
|
1999-04-13 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: |
NA when run from simulator. |
|
1999-04-12 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: |
Disabled 115200 for MN10300. |
Reclaim interrupt vectors from CygMon when testing on SLEB. |
|
1999-04-09 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/serial.h: Change SERIAL_CHANNEL setup so all channels |
have serial callbacks, regardless of buffering. |
|
1999-04-09 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/common/tty.c: |
* include/pkgconf/io_serial.h: |
Added new ttydiag device layered on top of haldiag, so that tty0 |
can be layered on top of ser0. |
|
1999-04-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/tty1.c: [added] |
* tests/tty2.c: [added] |
* tests/PKGconf.mak: |
* tests/ser_test_protocol.inl: |
Added two simple TTY tests. |
|
1999-04-07 Hugo Tyson <hmt@cygnus.co.uk> |
|
* src/sparclite/sleb_sdtr.h: Include cyg/hal/hal_io.h for I/O |
macros instead of hal_diag.h where they had evolved before. |
|
1999-04-06 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/serial4.c (serial_test): |
* tests/serial3.c (serial_test): |
Reduce packet sizes. |
|
1999-03-31 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Added remaining targets to the |
test. |
|
1999-03-31 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/sparclite/sleb_sdtr.c (sleb_sdtr_start_xmit): Fix timing race |
when enabling xmit interrupts. |
|
1999-03-26 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/sparclite/sleb_sdtr.c: Change how the port is set up. The transmitter |
is now always enabled, just the interrupts are masked/unmasked to control it. |
This lets the serial driver cooperate with Cygmon on the port used for GDB. |
Note that currently serial input does not work for CON1 since Cygmon is |
taking all of the receive interrupts for itself. |
(sleb_sdtr_tx_DSR): Need to keep track whether xmit interrupt should be |
enabled - otherwise it can get enabled incorrectly and we get interrupted |
to death! |
|
1999-03-26 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Send a DONE message after a no-echo |
binary packet. |
|
1999-03-26 Hugo Tyson <hmt@cygnus.co.uk> |
|
* tests/serial5.c: |
* tests/serial4.c: |
* tests/serial3.c: |
* tests/serial2.c: |
* tests/serial1.c: |
Make these build when no kernel present; include of testcase |
was the wrong side of the ifdef. |
|
1999-03-26 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/serial5.c: |
* tests/serial4.c: |
* tests/serial3.c: |
* tests/serial2.c: |
* tests/serial1.c: |
Moved NOP check to ser_test_protocol open call. |
|
* tests/ser_test_protocol.inl: Make sure the proper device is |
selected for testing. Do NOP check in open call. |
|
1999-03-25 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: |
* misc/console.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: |
* src/common/tty.c: |
* src/mips/tx3904_serial.c: |
* src/mn10300/mn10300_serial.c: |
* src/powerpc/cogent_serial_with_ints.c: |
* src/sparclite/sleb_sdtr.c: Update CDL to follow naming conventions. |
|
* src/mips/tx3904_serial.c (tx3904_serial_config_port): |
Make sure port is enabled (CDL) before using it. |
|
* src/mn10300/mn10300_serial.c (mn10300_serial_config_port): |
* src/powerpc/cogent_serial_with_ints.c (cogent_serial_config_port): |
* src/arm/aeb_serial.c (aeb_serial_config_port): |
* src/arm/pid_serial_with_ints.c (pid_serial_config_port): Change so that |
the physical port is not modified unless the provided configuration is valid. |
|
* src/sparclite/sleb_sdtr.c (sleb_sdtr_config_port): |
Using wrong config data. |
|
* include/serialio.h: Add macros to support baud rate from CDL. |
|
* include/pkgconf/io_serial.h: |
* src/mn10300/mn10300_serial.c: |
* src/mips/tx3904_serial.c (tx3904_serial_ISR): |
* src/sparclite/sleb_sdtr.c: |
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/pid_serial_with_ints.c: |
* src/arm/aeb_serial.c: Add configury for baud rate and buffer size. |
|
1999-03-24 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mips/tx3904_serial.c: |
Now uses CYGHWR_HAL_MIPS_CPU_FREQ_ACTUAL to get CPU |
frequency. This is a little more accurate than using |
CYGHWR_HAL_MIPS_CPU_FREQ. |
|
1999-03-24 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/serialio.h (CYGNUM_SERIAL_BAUD_MIN/MAX): Add for completeness. |
|
* src/arm/aeb_serial.c (aeb_serial_stop_xmit): |
* src/arm/pid_serial_with_ints.c (pid_serial_stop_xmit): Fix typo in comment. |
|
1999-03-24 Jesper Skov <jskov@cygnus.co.uk> |
|
* tests/ser_test_protocol.inl: Weeded out configs TX39 doesn't |
like. |
|
* src/powerpc/cogent_serial.h: |
Added copyright header. |
|
* tests/ser_test_protocol.inl: |
* tests/serial1.c: |
* tests/serial2.c: |
* tests/serial3.c: |
* tests/serial4.c: |
* tests/serial5.c: |
Don't try to run tests when no IO device has been specified. |
|
1999-03-23 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial1.c, misc/serial2.c, misc/serial3.c, misc/serial4.c, |
* misc/serial5.c, misc/ser_test_protocol.inl |
Deleted. |
|
1999-03-23 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/PKGconf.mak: |
* tests/timeout.inl: |
* tests/PKGconf.mak: |
* tests/serial1.c: |
* tests/serial2.c: |
* tests/serial3.c: |
* tests/serial4.c: |
* tests/serial5.c: |
* tests/ser_test_protocol.inl: |
Moved the serial tests from the misc directory to the tests |
directory. |
|
1999-03-23 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c: Now initially mask TX interrupts |
at initialization and unmask/remask in start/stop xmit |
routines. This has no real effect on the hardware, but the |
simulator does not implement the LCR_TXE bit properly, resulting |
in spurious TX interrupts during diagnostic output. |
This was the cause of the slow output reported in PR 19559. |
|
1999-03-23 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Fix "display" strings to have appropriate |
case - mostly lower case. |
|
1999-03-22 Hugo Tyson <hmt@cygnus.co.uk> |
|
* misc/console.c: |
* misc/serial.c: |
* misc/serial1.c: |
* misc/serial2.c: |
* misc/serial3.c: |
* misc/serial4.c: |
* misc/serial5.c: |
Use CYGNUM_HAL_STACK_SIZE_TYPICAL for the stack size instead of |
CYGNUM_HAL_MINIMUM_STACK_SIZE. |
|
1999-03-22 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c: |
* src/mips/tx3904_serial.c: Add CDL configury. |
|
* include/pkgconf/io_serial.h: Update CDL to add device name |
configurability for all devices. |
|
* src/sparclite/sleb_sdtr.c: |
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: Use CDL configured device names. |
|
1999-03-22 Jesper Skov <jskov@lassi.cygnus.co.uk> |
|
* misc/serial1.c: |
* misc/serial2.c: |
* misc/serial3.c: |
* misc/serial4.c: |
* misc/serial5.c: |
Requires kernel as well. |
|
1999-03-22 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/sparclite/sleb_sdtr.c: |
Moved include statement to avoid warnings. |
|
1999-03-19 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/ser_test_protocol.inl: |
* misc/serial5.c: |
* misc/PKGconf.mak: |
Replace complex and not very stable duplex test with a simpler |
test that works better. |
Added serial5 using that test. |
|
1999-03-19 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/PKGconf.mak: |
* misc/serial1.c: |
* misc/serial2.c: |
Added API test and made serial2 do simple string output. |
|
1999-03-19 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: Changed ToDo comment. |
|
1999-03-19 Jesper Skov <jskov@lassi.cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: |
Moved include statement to avoid warnings. |
|
1999-03-19 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: More CDL problems. |
|
1999-03-18 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Add CDL for SPARClite SLEB. |
|
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/pid_serial_with_ints.c: |
* src/arm/aeb_serial.c: Update device names to match CDL. |
|
* include/pkgconf/io_serial.h: Change names for serial ports to |
be CYGPKG_IO_SERIAL_<arch>_<platform>_<port>. |
|
1999-03-18 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/ser_test_protocol.inl: |
* misc/serial2.c: |
First stab at the duplex binary test. Still much fun to be had... |
|
1999-03-18 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/ser_test_protocol.inl: Added timeout for PING. |
|
1999-03-18 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/common/serial.c: Change ABORT functionality to be DSR safe. |
(serial_get_config): Fix typo! |
|
* include/pkgconf/io_serial.h: Small change in CDL to make serial |
devices tied to the platform and not the serial I/O package. This |
means that only the devices appropriate to a given platform can be |
enabled. |
|
* misc/serial.c: Better use of alarms - only trigger at the time of |
the next timeout. Moved timeout functions to new file "timeout.inl". |
|
* src/common/serial.c (serial_get_config): Add support for |
CYG_IO_GET_CONFIG_SERIAL_INPUT_FLUSH and CYG_IO_GET_CONFIG_SERIAL_ABORT. |
|
* misc/serial.c: Add simple timeout mechanisms. |
|
1999-03-17 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: Conditionalize based on CDL. |
|
* include/pkgconf/io_serial.h: Add some CDL configury - not perfect |
because of current ~CDL limitations. |
|
1999-03-17 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c: Cleaned up a bit. Used for hacking new tests. |
|
1999-03-17 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/PKGconf.mak: |
* misc/ser_test_protocol.inl: |
* misc/serial2.c: |
* misc/serial3.c: |
* misc/serial4.c: |
Put testing protocol implementation in a separate file. Split the |
tests in serial2 into separate files. |
|
1999-03-16 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c: Fixed some compiler warnings. |
|
1999-03-15 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Change default configurations. |
No serial drivers enabled for PID port A or AEB. |
|
* src/sparclite/sleb_sdtr.c: |
* src/powerpc/cogent_serial_with_ints.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: |
* src/common/haldiag.c: |
* src/common/tty.c: |
* src/common/serial.c: Add 'CYGDBG_IO_INIT' for control of init |
messages. |
|
* src/powerpc/cogent_serial_with_ints.c: |
* src/sparclite/sleb_sdtr.c: |
* src/arm/aeb_serial.c: |
* src/arm/pid_serial_with_ints.c: Don't include <cyg/kernel/kapi.h> |
|
1999-03-15 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c (serial_test): Fix use of strlen. Fix DONE part |
of binary protocol. |
|
1999-03-12 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c: Play a bit with timing. Think I broke it :( |
Added DONE to BINARY packet. |
Proper call to DRAIN. |
|
1999-03-12 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mips/tx3904_serial.c: Tidied away some debugging code. |
|
1999-03-12 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c: Removed bogus config changes. |
|
1999-03-12 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c (serial_test): Check for ser_filter on host (PING |
packet). |
|
1999-03-11 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: Added note. |
|
* misc/serial2.c: |
Added (almost) proper configuration handling. |
Run tests on varying configurations. |
|
1999-03-11 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mips/tx3904_serial.c: |
Many changes to get working. |
|
* misc/console.c (console_test): Fixed compiler warning. |
|
* misc/serial2.c: |
Added device name for TX39 testing. |
Fixed some bugs in Tcyg_io_write() macro. |
|
1999-03-10 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c: Added target specific test device name. |
|
1999-03-10 John Dallaway <jld@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Correct CDL description spelling. |
|
1999-03-10 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: |
* misc/console.c: |
Fixed compiler warnings. |
|
1999-03-10 Gary Thomas <gthomas@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Improve CDL descriptions. |
|
1999-03-10 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c (serial_test): Do some more tests with changed |
baud rates. |
|
1999-03-09 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c (serial_test): Added workaround for spurious byte |
problem. Added a few more tests to run. |
|
* src/powerpc/cogent_serial_with_ints.c |
(cogent_serial_config_port): Remove interrupt enabling. |
|
1999-03-09 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/PKGconf.mak: |
* src/mips/tx3904_serial.c: |
Added initial version of TX39 device driver. Currently untested |
but eliminates PR19445. |
|
1999-03-09 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c: DRAIN function works now. |
|
1999-03-09 Jesper Skov <jskov@cygnus.co.uk> |
|
* include/pkgconf/io_serial.h: Only enable one serial driver per |
default. |
|
1999-03-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial2.c (serial_test): Be a bit more aggressive. |
|
* src/powerpc/cogent_serial_with_ints.c: Check that configuration |
is sensible. |
|
1999-03-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: |
Added support for both ports. |
|
* include/pkgconf/io_serial.h: Added simple defines for cogent |
serial ports. No CDL yet. |
|
1999-03-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* misc/serial.c: Removed PID references. Fixed compiler warnings. |
|
1999-03-08 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c: Cleaned up a |
bit. Actually works now. |
|
1999-03-08 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/common/serial.c: Change in cyg_drv_cond_wait() behaviour |
means DSR lock should be left alone. |
|
1999-03-08 Jesper Skov <jskov@cygnus.co.uk> |
PR 19400 |
* src/powerpc/cogent_serial_with_ints.c (cogent_serial_init): Set |
valid interrupt priority. |
|
1999-03-05 Nick Garnett <nickg@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c (mn10300_serial_init): |
Added extra test to avoid initializing serial 2 when CYGMON is |
present. |
Include hal_intr.h explicitly for use in non-kernel |
configurations. |
|
* src/common/serial.c: |
Added extra test before calls to cyg_drv_cond_wait() to avoid race |
condition. This is not, however, a complete solution to this |
problem. A better solution will be forthcoming. |
|
* include/serial.h: |
Changed include files used to permit non-kernel configurations to |
be built. |
|
1999-03-05 Jesper Skov <jskov@cygnus.co.uk> |
|
* src/common/haldiag.c: Removed diag_printf declaration. |
|
1999-03-05 Jonathan Larmour <jlarmour@cygnus.co.uk> |
|
* src/mn10300/mn10300_serial.c: |
Change CYG_VECTOR_* to CYGNUM_HAL_INTERRUPT_* to get it to compile! |
|
1999-03-05 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/powerpc/cogent_serial_with_ints.c (cogent_serial_config_port): |
Fix renaming of interrupt vectors. |
|
1999-03-05 Gary Thomas <gthomas@cygnus.co.uk> |
|
* src/arm/pid_serial_with_ints.c: Fix interrupt vectors. |
|
1999-03-03 Gary Thomas <gthomas@cygnus.co.uk> |
|
* serial/current/src/arm/pid_serial_with_ints.c: |
New [somewhat] configurable drivers for PID. |
|
//=========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//=========================================================================== |
/sleb/v2_0/src/sleb_sdtr.c
0,0 → 1,401
//========================================================================== |
// |
// io/serial/sparclite/sleb_sdtr.c |
// |
// Serial I/O interface module for SPARClite Eval Board (SLEB) |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): gthomas |
// Contributors: gthomas |
// Date: 1999-02-04 |
// Purpose: SLEB serial I/O module |
// Description: |
// |
//####DESCRIPTIONEND#### |
// |
//========================================================================== |
|
#include <pkgconf/io.h> |
#include <pkgconf/io_serial.h> |
#include <cyg/io/io.h> |
#include <cyg/hal/hal_intr.h> |
#include <cyg/io/devtab.h> |
#include <cyg/io/serial.h> |
|
#ifdef CYGPKG_IO_SERIAL_SPARCLITE_SLEB |
|
#include "sleb_sdtr.h" |
|
extern void diag_printf(const char *fmt, ...); |
|
#define BUFSIZE 128 |
|
typedef struct sleb_sdtr_info { |
CYG_ADDRWORD base; |
CYG_WORD tx_int_num; |
CYG_WORD rx_int_num; |
cyg_interrupt tx_serial_interrupt; |
cyg_handle_t tx_serial_interrupt_handle; |
cyg_interrupt rx_serial_interrupt; |
cyg_handle_t rx_serial_interrupt_handle; |
cyg_uint8 cmd_reg; |
bool xmit_enabled; |
} sleb_sdtr_info; |
|
static bool sleb_sdtr_init(struct cyg_devtab_entry *tab); |
static bool sleb_sdtr_putc(serial_channel *chan, unsigned char c); |
static Cyg_ErrNo sleb_sdtr_lookup(struct cyg_devtab_entry **tab, |
struct cyg_devtab_entry *sub_tab, |
const char *name); |
static unsigned char sleb_sdtr_getc(serial_channel *chan); |
static Cyg_ErrNo sleb_sdtr_set_config(serial_channel *chan, cyg_uint32 key, |
const void *xbuf, cyg_uint32 *len); |
static void sleb_sdtr_start_xmit(serial_channel *chan); |
static void sleb_sdtr_stop_xmit(serial_channel *chan); |
|
static cyg_uint32 sleb_sdtr_tx_ISR(cyg_vector_t vector, cyg_addrword_t data); |
static void sleb_sdtr_tx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data); |
static cyg_uint32 sleb_sdtr_rx_ISR(cyg_vector_t vector, cyg_addrword_t data); |
static void sleb_sdtr_rx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data); |
|
static SERIAL_FUNS(sleb_sdtr_funs, |
sleb_sdtr_putc, |
sleb_sdtr_getc, |
sleb_sdtr_set_config, |
sleb_sdtr_start_xmit, |
sleb_sdtr_stop_xmit |
); |
|
#ifdef CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 |
static sleb_sdtr_info sleb_sdtr_info0 = {SLEB_SDTR0_BASE, SLEB_SDTR0_TX_INT, SLEB_SDTR0_RX_INT}; |
#if CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE > 0 |
static unsigned char sleb_sdtr_out_buf0[CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE]; |
static unsigned char sleb_sdtr_in_buf0[CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BUFSIZE]; |
|
static SERIAL_CHANNEL_USING_INTERRUPTS(sleb_sdtr_channel0, |
sleb_sdtr_funs, |
sleb_sdtr_info0, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT, |
&sleb_sdtr_out_buf0[0], sizeof(sleb_sdtr_out_buf0), |
&sleb_sdtr_in_buf0[0], sizeof(sleb_sdtr_in_buf0) |
); |
#else |
static SERIAL_CHANNEL(sleb_sdtr_channel0, |
sleb_sdtr_funs, |
sleb_sdtr_info0, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON1_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT |
); |
#endif |
|
DEVTAB_ENTRY(sleb_sdtr_io0, |
CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON1_NAME, |
0, // Does not depend on a lower level interface |
&cyg_io_serial_devio, |
sleb_sdtr_init, |
sleb_sdtr_lookup, // Serial driver may need initializing |
&sleb_sdtr_channel0 |
); |
#endif // CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 |
|
#ifdef CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 |
static sleb_sdtr_info sleb_sdtr_info1 = {SLEB_SDTR1_BASE, SLEB_SDTR1_TX_INT, SLEB_SDTR1_RX_INT}; |
#if CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE > 0 |
static unsigned char sleb_sdtr_out_buf1[CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE]; |
static unsigned char sleb_sdtr_in_buf1[CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BUFSIZE]; |
|
static SERIAL_CHANNEL_USING_INTERRUPTS(sleb_sdtr_channel1, |
sleb_sdtr_funs, |
sleb_sdtr_info1, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT, |
&sleb_sdtr_out_buf1[0], sizeof(sleb_sdtr_out_buf1), |
&sleb_sdtr_in_buf1[0], sizeof(sleb_sdtr_in_buf1) |
); |
#else |
static SERIAL_CHANNEL(sleb_sdtr_channel1, |
sleb_sdtr_funs, |
sleb_sdtr_info1, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SPARCLITE_SLEB_CON2_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT |
); |
#endif |
|
DEVTAB_ENTRY(sleb_sdtr_io1, |
CYGDAT_IO_SERIAL_SPARCLITE_SLEB_CON2_NAME, |
0, // Does not depend on a lower level interface |
&cyg_io_serial_devio, |
sleb_sdtr_init, |
sleb_sdtr_lookup, // Serial driver may need initializing |
&sleb_sdtr_channel1 |
); |
#endif // CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON2 |
|
// Internal function to actually configure the hardware to desired baud rate, etc. |
static bool |
sleb_sdtr_config_port(serial_channel *chan, cyg_serial_info_t *new_config, bool init) |
{ |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
CYG_ADDRWORD port = sdtr_chan->base; |
cyg_int32 baud_divisor; |
cyg_int32 clk, tval; |
unsigned char mode; |
#if 0 |
if ((new_config->baud < CYGNUM_SERIAL_BAUD_MIN) || (new_config->baud > CYGNUM_SERIAL_BAUD_MAX)) |
return false; // Invalid baud rate |
#endif |
baud_divisor = select_baud[new_config->baud]; |
if (baud_divisor == 0) |
return false; // Unsupported baud rate |
// Reset the port |
HAL_SPARC_86940_WRITE(SDTR_CONTROL(port), SDTR_CMD_RST); |
// Write the mode |
mode = SDTR_MODE_MODE_ASYNC16 | |
select_word_length[new_config->word_length - CYGNUM_SERIAL_WORD_LENGTH_5] | |
select_stop_bits[new_config->stop] | |
select_parity[new_config->parity]; |
HAL_SPARC_86940_WRITE(SDTR_CONTROL(port), mode); |
// Set baud rate clock. |
// ***** CAUTION! Both ports use the same time, thus they must both run at the same baud rate! |
clk = *SLEB_CLOCK_SWITCH; // Compute board speed |
if (clk & 0x80) clk = 10; |
clk = (clk & 0x3F) * 1000000; // in MHz |
tval = (clk / (baud_divisor * 32)) - 1; |
HAL_SPARC_86940_WRITE(SLEB_TIMER3_RELOAD, tval); |
// Set up control register |
sdtr_chan->cmd_reg = SDTR_CMD_RTS | SDTR_CMD_DTR | SDTR_CMD_TxEN; |
#ifdef CYGPKG_IO_SERIAL_SPARCLITE_SLEB_CON1 |
// Cygmon needs the receiver |
if ((chan->out_cbuf.len != 0) || (chan == &sleb_sdtr_channel0)) { |
#else |
if (chan->out_cbuf.len != 0) { |
#endif |
sdtr_chan->cmd_reg |= SDTR_CMD_RxEN; |
} |
if (init) { |
sdtr_chan->xmit_enabled = false; |
} |
HAL_SPARC_86940_WRITE(SDTR_CONTROL(port), sdtr_chan->cmd_reg); |
if (new_config != &chan->config) |
chan->config = *new_config; |
return true; |
} |
|
// Function to initialize the device. Called at bootstrap time. |
static bool |
sleb_sdtr_init(struct cyg_devtab_entry *tab) |
{ |
serial_channel *chan = (serial_channel *)tab->priv; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
#ifdef CYGDBG_IO_INIT |
diag_printf("SLEB SERIAL init - dev: %x.%d.%d\n", sdtr_chan->base, sdtr_chan->tx_int_num, sdtr_chan->rx_int_num); |
#endif |
(chan->callbacks->serial_init)(chan); // Really only required for interrupt driven devices |
if (chan->out_cbuf.len != 0) { |
cyg_drv_interrupt_create(sdtr_chan->tx_int_num, |
99, // Priority - unused |
(cyg_addrword_t)chan, // Data item passed to interrupt handler |
sleb_sdtr_tx_ISR, |
sleb_sdtr_tx_DSR, |
&sdtr_chan->tx_serial_interrupt_handle, |
&sdtr_chan->tx_serial_interrupt); |
cyg_drv_interrupt_attach(sdtr_chan->tx_serial_interrupt_handle); |
cyg_drv_interrupt_mask(sdtr_chan->tx_int_num); |
cyg_drv_interrupt_create(sdtr_chan->rx_int_num, |
99, // Priority - unused |
(cyg_addrword_t)chan, // Data item passed to interrupt handler |
sleb_sdtr_rx_ISR, |
sleb_sdtr_rx_DSR, |
&sdtr_chan->rx_serial_interrupt_handle, |
&sdtr_chan->rx_serial_interrupt); |
cyg_drv_interrupt_attach(sdtr_chan->rx_serial_interrupt_handle); |
cyg_drv_interrupt_unmask(sdtr_chan->rx_int_num); |
} |
sleb_sdtr_config_port(chan, &chan->config, true); |
return true; |
} |
|
// This routine is called when the device is "looked" up (i.e. attached) |
static Cyg_ErrNo |
sleb_sdtr_lookup(struct cyg_devtab_entry **tab, |
struct cyg_devtab_entry *sub_tab, |
const char *name) |
{ |
serial_channel *chan = (serial_channel *)(*tab)->priv; |
(chan->callbacks->serial_init)(chan); // Really only required for interrupt driven devices |
return ENOERR; |
} |
|
// Send a character to the device output buffer. |
// Return 'true' if character is sent to device |
static bool |
sleb_sdtr_putc(serial_channel *chan, unsigned char c) |
{ |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
CYG_ADDRWORD port = sdtr_chan->base; |
cyg_uint8 status; |
HAL_SPARC_86940_READ(SDTR_STATUS(port), status); |
if (status & SDTR_STAT_TxRDY) { |
// Transmit buffer is empty |
HAL_SPARC_86940_WRITE(SDTR_TXDATA(port), c); |
return true; |
} else { |
// No space |
return false; |
} |
} |
|
// Fetch a character from the device input buffer, waiting if necessary |
static unsigned char |
sleb_sdtr_getc(serial_channel *chan) |
{ |
unsigned char c; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
CYG_ADDRWORD port = sdtr_chan->base; |
cyg_uint8 status; |
HAL_SPARC_86940_READ(SDTR_STATUS(port), status); |
while ((status & SDTR_STAT_RxRDY) == 0) |
HAL_SPARC_86940_READ(SDTR_STATUS(port), status); // Wait for char |
HAL_SPARC_86940_READ(SDTR_RXDATA(port), c); |
return c; |
} |
|
// Set up the device characteristics; baud rate, etc. |
static Cyg_ErrNo |
sleb_sdtr_set_config(serial_channel *chan, cyg_uint32 key, |
const void *xbuf, cyg_uint32 *len) |
{ |
switch (key) { |
case CYG_IO_SET_CONFIG_SERIAL_INFO: |
{ |
cyg_serial_info_t *config = (cyg_serial_info_t *)xbuf; |
if ( *len < sizeof(cyg_serial_info_t) ) { |
return -EINVAL; |
} |
*len = sizeof(cyg_serial_info_t); |
if ( true != sleb_sdtr_config_port(chan, config, false) ) |
return -EINVAL; |
} |
break; |
default: |
return -EINVAL; |
} |
return ENOERR; |
} |
|
// Enable the transmitter on the device |
static void |
sleb_sdtr_start_xmit(serial_channel *chan) |
{ |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
sdtr_chan->xmit_enabled = true; |
cyg_drv_interrupt_unmask(sdtr_chan->tx_int_num); |
} |
|
// Disable the transmitter on the device |
static void |
sleb_sdtr_stop_xmit(serial_channel *chan) |
{ |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
cyg_drv_interrupt_mask(sdtr_chan->tx_int_num); |
sdtr_chan->xmit_enabled = false; |
} |
|
// Serial I/O - low level interrupt handler (ISR) |
static cyg_uint32 |
sleb_sdtr_tx_ISR(cyg_vector_t vector, cyg_addrword_t data) |
{ |
serial_channel *chan = (serial_channel *)data; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
cyg_drv_interrupt_mask(sdtr_chan->tx_int_num); |
cyg_drv_interrupt_acknowledge(sdtr_chan->tx_int_num); |
return CYG_ISR_CALL_DSR; // Cause DSR to be run |
} |
|
// Serial I/O - high level interrupt handler (DSR) |
static void |
sleb_sdtr_tx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data) |
{ |
serial_channel *chan = (serial_channel *)data; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
(chan->callbacks->xmt_char)(chan); |
if (sdtr_chan->xmit_enabled) |
cyg_drv_interrupt_unmask(sdtr_chan->tx_int_num); |
} |
|
// Serial I/O - low level interrupt handler (ISR) |
static cyg_uint32 |
sleb_sdtr_rx_ISR(cyg_vector_t vector, cyg_addrword_t data) |
{ |
serial_channel *chan = (serial_channel *)data; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
cyg_drv_interrupt_mask(sdtr_chan->rx_int_num); |
return CYG_ISR_CALL_DSR; // Cause DSR to be run |
} |
|
// Serial I/O - high level interrupt handler (DSR) |
static void |
sleb_sdtr_rx_DSR(cyg_vector_t vector, cyg_ucount32 count, cyg_addrword_t data) |
{ |
serial_channel *chan = (serial_channel *)data; |
sleb_sdtr_info *sdtr_chan = (sleb_sdtr_info *)chan->dev_priv; |
CYG_ADDRWORD port = sdtr_chan->base; |
cyg_uint8 status, c; |
HAL_SPARC_86940_READ(SDTR_STATUS(port), status); |
if ((status & SDTR_STAT_RxRDY) != 0) { |
HAL_SPARC_86940_READ(SDTR_RXDATA(port), c); |
(chan->callbacks->rcv_char)(chan, c); |
} |
cyg_drv_interrupt_acknowledge(sdtr_chan->rx_int_num); |
cyg_drv_interrupt_unmask(sdtr_chan->rx_int_num); |
} |
|
#endif // CYGPKG_IO_SERIAL_SPARCLITE_SLEB |
/sleb/v2_0/src/sleb_sdtr.h
0,0 → 1,167
#ifndef CYGONCE_SLEB_SDTR_H |
#define CYGONCE_SLEB_SDTR_H |
//========================================================================== |
// |
// io/serial/sparclite/sleb_sdtr.c |
// |
// Serial I/O interface module for SPARClite Eval Board (SLEB) |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): gthomas |
// Contributors: gthomas |
// Date: 1999-02-04 |
// Purpose: SLEB serial I/O module |
// Description: |
// |
//####DESCRIPTIONEND#### |
// |
//========================================================================== |
|
#include <cyg/hal/hal_io.h> // For I/O macros |
|
#define reg(n) ((n)*4) |
|
// SDTR Registers |
#define SDTR_TXDATA(base) base+reg(0) |
#define SDTR_RXDATA(base) base+reg(0) |
#define SDTR_STATUS(base) base+reg(1) |
#define SDTR_CONTROL(base) base+reg(1) |
|
// Mode register |
#define SDTR_MODE_MODE_MASK 0x03 // Mode selection bits (mask) |
#define SDTR_MODE_MODE_SYNC 0x00 // Synchronous mode |
#define SDTR_MODE_MODE_ASYNC1 0x01 // Async - clock/1 |
#define SDTR_MODE_MODE_ASYNC16 0x02 // Async - clock/16 |
#define SDTR_MODE_MODE_ASYNC64 0x03 // Async - clock/64 |
#define SDTR_MODE_DTB_MASK 0x0C // Number of data bits (mask) |
#define SDTR_MODE_DTB_5 0x00 // 5 bits / char |
#define SDTR_MODE_DTB_6 0x04 // 6 bits / char |
#define SDTR_MODE_DTB_7 0x08 // 7 bits / char |
#define SDTR_MODE_DTB_8 0x0C // 8 bits / char |
#define SDTR_MODE_PARITY_MASK 0x30 // Parity modes (mask) |
#define SDTR_MODE_PARITY_ENABLE 0x10 // Enable parity |
#define SDTR_MODE_PARITY_NONE 0x00 // No parity (parity disabled) |
#define SDTR_MODE_PARITY_ODD 0x00 // Odd parity |
#define SDTR_MODE_PARITY_EVEN 0x20 // Even parity |
#define SDTR_MODE_STOP_BITS_MASK 0xC0 // Number of stop bits (mask) |
#define SDTR_MODE_STOP_BITS_1 0x40 // 1 stop bit |
#define SDTR_MODE_STOP_BITS_1_5 0x80 // 1.5 stop bits |
#define SDTR_MODE_STOP_BITS_2 0xC0 // 2 stop bits |
|
// Command register |
#define SDTR_CMD_TxEN 0x01 // Enable transmitter |
#define SDTR_CMD_DTR 0x02 // Assert DTR |
#define SDTR_CMD_RxEN 0x04 // Enable receiver |
#define SDTR_CMD_BREAK 0x08 // Send break |
#define SDTR_CMD_EFR 0x10 // Error flag reset |
#define SDTR_CMD_RTS 0x20 // Assert RTS |
#define SDTR_CMD_RST 0x40 // Internal RESET |
#define SDTR_CMD_EHM 0x80 // Enable Hunt mode |
|
// Status register |
#define SDTR_STAT_TxRDY 0x01 // Transmitter ready |
#define SDTR_STAT_RxRDY 0x02 // Receiver ready |
#define SDTR_STAT_TxEMP 0x04 // Transmitter empty |
#define SDTR_STAT_PERR 0x08 // Parity error |
#define SDTR_STAT_OERR 0x10 // Overrun error |
#define SDTR_STAT_FERR 0x20 // Framing error |
#define SDTR_STAT_SYBRK 0x40 // Break |
#define SDTR_STAT_DSR 0x80 // State of DSR signal |
|
// Offsets to standard SDTR elements |
#define SLEB_SDTR0_BASE (8*4) |
#define SLEB_SDTR0_TX_INT 9 |
#define SLEB_SDTR0_RX_INT 10 |
#define SLEB_SDTR1_BASE (12*4) |
#define SLEB_SDTR1_TX_INT 6 |
#define SLEB_SDTR1_RX_INT 7 |
#define SLEB_TIMER3_CONTROL reg(29) |
#define SLEB_TIMER3_RELOAD reg(30) |
|
// On-board switch, used to determine baud rate |
#define SLEB_CLOCK_SWITCH (volatile unsigned char *)0x01000003 |
|
static unsigned char select_word_length[] = { |
SDTR_MODE_DTB_5, // 5 bits / word (char) |
SDTR_MODE_DTB_6, |
SDTR_MODE_DTB_7, |
SDTR_MODE_DTB_8 |
}; |
|
static unsigned char select_stop_bits[] = { |
0, |
SDTR_MODE_STOP_BITS_1, // 1 stop bit |
SDTR_MODE_STOP_BITS_1_5, // 1.5 stop bit |
SDTR_MODE_STOP_BITS_2 // 2 stop bits |
}; |
|
static unsigned char select_parity[] = { |
SDTR_MODE_PARITY_NONE, // No parity |
SDTR_MODE_PARITY_ENABLE|SDTR_MODE_PARITY_EVEN, // Even parity |
SDTR_MODE_PARITY_ENABLE|SDTR_MODE_PARITY_ODD, // ODD parity |
0xFF, // Mark parity |
0xFF, // Space parity |
}; |
|
static cyg_int32 select_baud[] = { |
0, // Unused |
50, // 50 |
75, // 75 |
110, // 110 |
0, // 134.5 |
150, // 150 |
200, // 200 |
300, // 300 |
600, // 600 |
1200, // 1200 |
1800, // 1800 |
2400, // 2400 |
3600, // 3600 |
4800, // 4800 |
7200, // 7200 |
9600, // 9600 |
14400, // 14400 |
19200, // 19200 |
38400, // 38400 |
57600, // 57600 |
115200, // 115200 |
230400, // 230400 |
}; |
|
#endif // CYGONCE_SLEB_SDTR_H |
|