OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /openrisc/trunk/rtos/ecos-2.0/packages/hal/frv/frv400/v2_0/cdl
    from Rev 27 to Rev 174
    ↔ Reverse comparison
  •

Rev 27 → Rev 174

/hal_frv_frv400.cdl
0,0 → 1,372
# ====================================================================
#
# hal_frv_frv400.cdl
#
# FRV400 board HAL package configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): bartv
# Original data: gthomas
# Contributors:
# Date: 2001-09-07
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
cdl_package CYGPKG_HAL_FRV_FRV400 {
display "FUJITSU MB93091 (FR-V 400) evaluation board"
parent CYGPKG_HAL_FRV
 
define_header hal_frv_frv400.h
include_dir cyg/hal
hardware
description "
The frv400 HAL package provides the support needed to run
eCos on a FUJITSU MB93091 (FR-V 400) eval board."
 
compile hal_diag.c frv400_misc.c
 
implements CYGINT_HAL_DEBUG_GDB_STUBS
implements CYGINT_HAL_DEBUG_GDB_STUBS_BREAK
implements CYGINT_HAL_VIRTUAL_VECTOR_SUPPORT
implements CYGINT_HAL_FRV_ARCH_FR400
 
define_proc {
puts $::cdl_system_header "#define CYGBLD_HAL_TARGET_H <pkgconf/hal_frv.h>"
puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_H <pkgconf/hal_frv_frv400.h>"
puts $::cdl_system_header "#define CYGBLD_HAL_PLF_DEFS_H <cyg/hal/frv400.h>"
puts $::cdl_system_header "#define CYGBLD_HAL_PLATFORM_IO_H <cyg/hal/plf_io.h>"
puts $::cdl_header "#define HAL_PLATFORM_CPU \"Fujitsu FR400\""
puts $::cdl_header "#define HAL_PLATFORM_BOARD \"MB93091-CB10 evaluation board\""
puts $::cdl_header "#define HAL_PLATFORM_EXTRA \"\""
}
 
cdl_component CYG_HAL_STARTUP {
display "Startup type"
flavor data
default_value {"RAM"}
legal_values {"RAM" "ROM" "ROMRAM" }
no_define
define -file system.h CYG_HAL_STARTUP
description "
When targetting the MB93091 (FR-V 400) eval board it is possible to build
the system for either RAM bootstrap or ROM bootstrap(s). Select
'ram' when building programs to load into RAM using onboard
debug software such as Angel or eCos GDB stubs. Select 'rom'
when building a stand-alone application which will be put
into ROM. For the ROMRAM startup type, code will behave as
if in ROM, but will be copied to static RAM on the board before
execution."
}
 
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS {
display "Number of communication channels on the board"
flavor data
calculated 2
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL {
display "Debug serial port"
active_if CYGPRI_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_CONFIGURABLE
flavor data
legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
default_value 0
description "
The FRV400 board has two serial ports. This option
chooses which port will be used to connect to a host
running GDB."
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT {
display "Default console channel."
flavor data
legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
calculated 0
}
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL {
display "Diagnostic serial port"
active_if CYGPRI_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_CONFIGURABLE
flavor data
legal_values 0 to CYGNUM_HAL_VIRTUAL_VECTOR_COMM_CHANNELS-1
default_value CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_DEFAULT
description "
The FRV400 board has two serial ports. This option
chooses which port will be used for diagnostic output."
}
 
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_CONSOLE_CHANNEL_BAUD {
display "Diagnostic serial port baud rate"
flavor data
legal_values 9600 19200 38400 115200
default_value 38400
description "
This option selects the baud rate used for the diagnostic port.
Note: this should match the value chosen for the GDB port if the
diagnostic and GDB port are the same."
}
 
cdl_option CYGNUM_HAL_VIRTUAL_VECTOR_DEBUG_CHANNEL_BAUD {
display "GDB serial port baud rate"
flavor data
legal_values 9600 19200 38400 115200
default_value 38400
description "
This option selects the baud rate used for the diagnostic port.
Note: this should match the value chosen for the GDB port if the
diagnostic and GDB port are the same."
}
 
cdl_option CYGSEM_HAL_DIAG_USES_LEDS {
display "Use LED bank for feedback on serial port use"
flavor bool
default_value 1
description "
Enable this option to display information in the motherboard
LED array about serial I/O. Indications will be made while
data is being sent and received over the diagnostic serial ports.
This can be useful when the board is talking with GDB, etc."
}
 
# Real-time clock/counter specifics
cdl_component CYGNUM_HAL_RTC_CONSTANTS {
display "Real-time clock constants"
flavor none
cdl_option CYGNUM_HAL_RTC_NUMERATOR {
display "Real-time clock numerator"
flavor data
calculated 1000000000
}
cdl_option CYGNUM_HAL_RTC_DENOMINATOR {
display "Real-time clock denominator"
flavor data
calculated 100
}
cdl_option CYGNUM_HAL_RTC_PERIOD {
display "Real-time clock period"
flavor data
# Internal clock set up to run at 1MHz
calculated { (1000000/CYGNUM_HAL_RTC_DENOMINATOR) }
}
}
 
cdl_component CYGBLD_GLOBAL_OPTIONS {
display "Global build options"
flavor none
parent CYGPKG_NONE
description "
Global build options including control over
compiler flags, linker flags and choice of toolchain."
 
 
cdl_option CYGBLD_GLOBAL_COMMAND_PREFIX {
display "Global command prefix"
flavor data
no_define
default_value { "frv-elf" }
description "
This option specifies the command prefix used when
invoking the build tools."
}
 
cdl_option CYGBLD_GLOBAL_CFLAGS {
display "Global compiler flags"
flavor data
no_define
default_value { "-mcpu=fr400 -fPIC -G0 -Wall -Wpointer-arith -Wstrict-prototypes -Winline -Wundef -Woverloaded-virtual -g -O2 -ffunction-sections -fdata-sections -fno-rtti -fno-exceptions -fvtable-gc -finit-priority" }
description "
This option controls the global compiler flags which are used to
compile all packages by default. Individual packages may define
options which override these global flags."
}
 
cdl_option CYGBLD_GLOBAL_LDFLAGS {
display "Global linker flags"
flavor data
no_define
default_value { "-mcpu=fr400 -fPIC -G0 -Wl,--gc-sections -Wl,-static -g -nostdlib" }
description "
This option controls the global linker flags. Individual
packages may define options which override these global flags."
}
 
cdl_option CYGBLD_BUILD_GDB_STUBS {
display "Build GDB stub ROM image"
default_value 0
requires { CYG_HAL_STARTUP == "ROM" }
requires CYGSEM_HAL_ROM_MONITOR
requires CYGDBG_HAL_DEBUG_GDB_INCLUDE_STUBS
requires ! CYGBLD_BUILD_COMMON_GDB_STUBS
requires CYGDBG_HAL_DEBUG_GDB_BREAK_SUPPORT
requires CYGDBG_HAL_DEBUG_GDB_THREAD_SUPPORT
requires ! CYGDBG_HAL_COMMON_INTERRUPTS_SAVE_MINIMUM_CONTEXT
requires ! CYGDBG_HAL_COMMON_CONTEXT_SAVE_MINIMUM
no_define
description "
This option enables the building of the GDB stubs for the
board. This is a bit convoluted as it involves prepending
the image with a special header used by the FRV400 firmware
to keep track of multiple ROM images. This header includes
a checksum making it necessary to build twice."
 
make -priority 320 {
<PREFIX>/bin/gdb_module.bin : <PACKAGE>/src/gdb_module.c
@sh -c "mkdir -p src $(dir $@)"
# First build version with no checksum.
$(CC) -c $(INCLUDE_PATH) -Wp,-MD,deps.tmp -I$(dir $<) $(CFLAGS) -o src/gdb_module_ncs.o $<
$(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o src/gdb_module_ncs.tmp src/gdb_module_ncs.o
$(OBJCOPY) --strip-debug --change-addresses=0xFBFF4000 src/gdb_module_ncs.tmp src/gdb_module_ncs.img
$(OBJCOPY) -O binary src/gdb_module_ncs.img src/gdb_module_ncs.bin
@rm src/gdb_module_ncs.tmp src/gdb_module_ncs.img
# Prepare dependency file
@echo $@ ": \\" > $(notdir $@).deps
@echo $(wildcard $(PREFIX)/lib/*) " \\" >> $(notdir $@).deps
@tail +2 deps.tmp >> $(notdir $@).deps
@echo >> $(notdir $@).deps
@rm deps.tmp
# Then build version with checksum from previously built image.
$(CC) -c -DCHECKSUM=`$(dir $<)flash_cksum.tcl src/gdb_module_ncs.bin` $(INCLUDE_PATH) -I$(dir $<) $(CFLAGS) -o src/gdb_module.o $<
$(CC) $(LDFLAGS) -L$(PREFIX)/lib -Ttarget.ld -o src/gdb_module.tmp src/gdb_module.o
$(OBJCOPY) --strip-debug --change-addresses=0xFBFF4000 src/gdb_module.tmp $(@:.bin=.img)
$(OBJCOPY) -O binary $(@:.bin=.img) src/gdb_module.bin
uuencode src/gdb_module.bin gdb_module.bin | tr '`' ' ' > $(@:.bin=.img.UU)
@rm src/gdb_module.tmp src/gdb_module_ncs.bin
@mv src/gdb_module.bin $@
}
}
}
 
cdl_component CYGHWR_MEMORY_LAYOUT {
display "Memory layout"
flavor data
no_define
calculated { (CYG_HAL_STARTUP == "RAM") ? "frv_frv400_ram" : \
(CYG_HAL_STARTUP == "ROM") ? "frv_frv400_rom" : \
(CYG_HAL_STARTUP == "ROMRAM") ? "frv_frv400_romram" : \
"frv_frv400C_UNKNOWN" }
 
cdl_option CYGHWR_MEMORY_LAYOUT_LDI {
display "Memory layout linker script fragment"
flavor data
no_define
define -file system.h CYGHWR_MEMORY_LAYOUT_LDI
calculated { (CYG_HAL_STARTUP == "RAM") ? "<pkgconf/mlt_frv_frv400_ram.ldi>" : \
(CYG_HAL_STARTUP == "ROM") ? "<pkgconf/mlt_frv_frv400_rom.ldi>" : \
(CYG_HAL_STARTUP == "ROMRAM") ? "<pkgconf/mlt_frv_frv400_romram.ldi>" : \
"<pkgconf/mlt_frv_frv400C_UNKNOWN.ldi>" }
}
 
cdl_option CYGHWR_MEMORY_LAYOUT_H {
display "Memory layout header file"
flavor data
no_define
define -file system.h CYGHWR_MEMORY_LAYOUT_H
calculated { (CYG_HAL_STARTUP == "RAM") ? "<pkgconf/mlt_frv_frv400_ram.h>" : \
(CYG_HAL_STARTUP == "ROM") ? "<pkgconf/mlt_frv_frv400_rom.h>" : \
(CYG_HAL_STARTUP == "ROMRAM") ? "<pkgconf/mlt_frv_frv400_romram.h>" : \
"<pkgconf/mlt_frv_frv400C_UNKNOWN.h>" }
}
}
 
cdl_option CYGSEM_HAL_ROM_MONITOR {
display "Behave as a ROM monitor"
flavor bool
default_value 0
parent CYGPKG_HAL_ROM_MONITOR
requires { CYG_HAL_STARTUP == "ROM" || CYG_HAL_STARTUP == "ROMRAM" }
description "
Enable this option if this program is to be used as a ROM monitor,
i.e. applications will be loaded into RAM on the board, and this
ROM monitor may process exceptions or interrupts generated from the
application. This enables features such as utilizing a separate
interrupt stack when exceptions are generated."
}
 
cdl_option CYGSEM_HAL_USE_ROM_MONITOR {
display "Work with a ROM monitor"
flavor booldata
legal_values { "Generic" "GDB_stubs" }
default_value { CYG_HAL_STARTUP == "RAM" ? "GDB_stubs" : 0 }
parent CYGPKG_HAL_ROM_MONITOR
requires { CYG_HAL_STARTUP == "RAM" }
description "
Support can be enabled for different varieties of ROM monitor.
This support changes various eCos semantics such as the encoding
of diagnostic output, or the overriding of hardware interrupt
vectors.
Firstly there is \"Generic\" support which prevents the HAL
from overriding the hardware vectors that it does not use, to
instead allow an installed ROM monitor to handle them. This is
the most basic support which is likely to be common to most
implementations of ROM monitor.
\"GDB_stubs\" provides support when GDB stubs are included in
the ROM monitor or boot ROM."
}
 
cdl_component CYGPKG_REDBOOT_HAL_OPTIONS {
display "Redboot HAL options"
flavor none
no_define
parent CYGPKG_REDBOOT
active_if CYGPKG_REDBOOT
description "
This option lists the target's requirements for a valid Redboot
configuration."
 
cdl_option CYGBLD_BUILD_REDBOOT_BIN {
display "Build Redboot ROM binary image"
active_if CYGBLD_BUILD_REDBOOT
default_value 1
no_define
description "This option enables the conversion of the Redboot ELF
image to a binary image suitable for ROM programming."
 
# compile -library=libextras.a redboot_cmds.c
make -priority 325 {
<PREFIX>/bin/redboot.bin : <PREFIX>/bin/redboot.elf
$(OBJCOPY) --strip-debug $< $(@:.bin=.img)
$(OBJCOPY) -O srec $< $(@:.bin=.srec)
$(OBJCOPY) -O binary $< $@
}
}
}
 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.