URL
https://opencores.org/ocsvn/openrisc_2011-10-31/openrisc_2011-10-31/trunk
Subversion Repositories openrisc_2011-10-31
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk
- from Rev 114 to Rev 115
- ↔ Reverse comparison
Rev 114 → Rev 115
/or1ksim/cpu/or32/or32.c
497,8 → 497,8
EF (l_cmov), OR32_R_FLAG, it_move}, |
{"l.ff1", "rD,rA", "11 0x8 DDDDD AAAAA ---- --00 ---- 0xF", |
EF (l_ff1), 0, it_arith}, |
{"l.fl1", "rD,rA", "11 0x8 DDDDD AAAAA ---- --01 ---- 0xF", EFI, 0, |
it_arith}, |
{"l.fl1", "rD,rA", "11 0x8 DDDDD AAAAA ---- --01 ---- 0xF", |
EF (l_fl1), 0, it_arith}, |
|
{"l.sfeq", "rA,rB", "11 0x9 00000 AAAAA BBBB B--- ---- ----", |
EF (l_sfeq), OR32_W_FLAG, it_compare}, |
/or1ksim/cpu/or32/insnset.c
611,6 → 611,18
INSTRUCTION (l_ff1) { |
SET_PARAM0(ffs(PARAM1)); |
} |
INSTRUCTION (l_fl1) { |
orreg_t t = (orreg_t)PARAM1; |
|
/* Reverse the word and use ffs */ |
t = (((t & 0xaaaaaaaa) >> 1) | ((t & 0x55555555) << 1)); |
t = (((t & 0xcccccccc) >> 2) | ((t & 0x33333333) << 2)); |
t = (((t & 0xf0f0f0f0) >> 4) | ((t & 0x0f0f0f0f) << 4)); |
t = (((t & 0xff00ff00) >> 8) | ((t & 0x00ff00ff) << 8)); |
t = ffs ((t >> 16) | (t << 16)); |
|
SET_PARAM0 (0 == t ? t : 33 - t); |
} |
/******* Floating point instructions *******/ |
/* Single precision */ |
INSTRUCTION (lf_add_s) { |
/or1ksim/NEWS
10,6 → 10,7
The following bugs are fixed. |
* Bug 1770: l.div does not set carry or give correct exception. |
* Bug 1771: l.add* do not correctly set the overflow flag. |
* Bug 1772: l.fl1 not implemented. |
* Bug 1776: l.addic is not implemented. |
|
The following bugs are either cannot be reproduced or will not be fixed. |
/or1ksim/ChangeLog
1,8 → 1,15
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* peripheral/Makefile.am: mc-defines.h added to sources. |
* cpu/or32/insnset.c <l_fl1>: New entry. |
* cpu/or32/or32.c <or32_opcodes>: l.fl1 enabled. |
* NEWS: Updated with new bugs fixed. |
|
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* peripheral/Makefile.am: mc-defines.h added to sources. |
* cpu/or32/insnset.c <l_addc>: Updated to handle overflow and |
exceptions correctly. |
* cpu/or32/or32.c <or32_opcodes>: l.addic enabled. |
* NEWS: Updated with new bugs fixed. |
|
2010-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* configure: Regenerated. |
11,6 → 18,7
* cpu/or32/insnset.c <l_add>: Updated to handle overflow and |
exceptions correctly. |
* peripheral/Makefile.am: mc-defines.h added to sources. |
* NEWS: Updated with new bugs fixed. |
|
2010-06-08 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* configure: Regenerated. |
/or1ksim/testsuite/test-code-or1k/inst-set-test/is-add-test.S
50,9 → 50,9
* In addition the l.addc and l.addic instructions should add in the carry |
* bit. |
* |
* Problems in this area were reported in Bug 1771. Having fixed the problem, |
* this is (in good software engineering style), a regression test to go with |
* the fix. |
* Problems in this area were reported in Bugs 1771 and 1776. Having fixed the |
* problem, this is (in good software engineering style), a regression test |
* to go with the fix. |
* |
* This is not a comprehensive test of any instruction (yet). |
* |
/or1ksim/testsuite/test-code-or1k/inst-set-test/Makefile.in
59,7 → 59,7
build_triplet = @build@ |
host_triplet = @host@ |
check_PROGRAMS = is-add-test$(EXEEXT) is-div-test$(EXEEXT) \ |
is-lws-test$(EXEEXT) $(am__EXEEXT_1) |
is-find-test$(EXEEXT) is-lws-test$(EXEEXT) $(am__EXEEXT_1) |
subdir = inst-set-test |
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in |
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
96,6 → 96,12
is_div_test_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ |
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
$(is_div_test_LDFLAGS) $(LDFLAGS) -o $@ |
am_is_find_test_OBJECTS = is-find-test.$(OBJEXT) |
is_find_test_OBJECTS = $(am_is_find_test_OBJECTS) |
is_find_test_DEPENDENCIES = inst-set-test.lo |
is_find_test_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ |
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
$(is_find_test_LDFLAGS) $(LDFLAGS) -o $@ |
am_is_lws_test_OBJECTS = is-lws-test.$(OBJEXT) |
is_lws_test_OBJECTS = $(am_is_lws_test_OBJECTS) |
is_lws_test_DEPENDENCIES = inst-set-test.lo |
122,10 → 128,11
$(LDFLAGS) -o $@ |
SOURCES = $(libinst_set_test_la_SOURCES) $(inst_set_test_old_SOURCES) \ |
$(is_add_test_SOURCES) $(is_div_test_SOURCES) \ |
$(is_lws_test_SOURCES) |
$(is_find_test_SOURCES) $(is_lws_test_SOURCES) |
DIST_SOURCES = $(libinst_set_test_la_SOURCES) \ |
$(inst_set_test_old_SOURCES) $(is_add_test_SOURCES) \ |
$(is_div_test_SOURCES) $(is_lws_test_SOURCES) |
$(is_div_test_SOURCES) $(is_find_test_SOURCES) \ |
$(is_lws_test_SOURCES) |
ETAGS = etags |
CTAGS = ctags |
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
257,17 → 264,22
|
# The new instruction set tests. |
is_add_test_SOURCES = inst-set-test.h \ |
is-add-test.S |
is-add-test.S |
|
is_add_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld |
is_add_test_LDADD = inst-set-test.lo |
is_div_test_SOURCES = inst-set-test.h \ |
is-div-test.S |
is-div-test.S |
|
is_div_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld |
is_div_test_LDADD = inst-set-test.lo |
is_find_test_SOURCES = inst-set-test.h \ |
is-find-test.S |
|
is_find_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld |
is_find_test_LDADD = inst-set-test.lo |
is_lws_test_SOURCES = inst-set-test.h \ |
is-lws-test.S |
is-lws-test.S |
|
is_lws_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld |
is_lws_test_LDADD = inst-set-test.lo |
341,6 → 353,9
is-div-test$(EXEEXT): $(is_div_test_OBJECTS) $(is_div_test_DEPENDENCIES) |
@rm -f is-div-test$(EXEEXT) |
$(is_div_test_LINK) $(is_div_test_OBJECTS) $(is_div_test_LDADD) $(LIBS) |
is-find-test$(EXEEXT): $(is_find_test_OBJECTS) $(is_find_test_DEPENDENCIES) |
@rm -f is-find-test$(EXEEXT) |
$(is_find_test_LINK) $(is_find_test_OBJECTS) $(is_find_test_LDADD) $(LIBS) |
is-lws-test$(EXEEXT): $(is_lws_test_OBJECTS) $(is_lws_test_DEPENDENCIES) |
@rm -f is-lws-test$(EXEEXT) |
$(is_lws_test_LINK) $(is_lws_test_OBJECTS) $(is_lws_test_LDADD) $(LIBS) |
355,6 → 370,7
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/inst-set-test.Plo@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/is-add-test.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/is-div-test.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/is-find-test.Po@am__quote@ |
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/is-lws-test.Po@am__quote@ |
|
.S.o: |
/or1ksim/testsuite/test-code-or1k/inst-set-test/is-find-test.S
0,0 → 1,124
/* is-find.test.S. l.ff1 and l.fl1 instruction test of Or1ksim |
* |
* Copyright (C) 1999-2006 OpenCores |
* Copyright (C) 2010 Embecosm Limited |
* |
* Contributors various OpenCores participants |
* Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> |
* |
* This file is part of OpenRISC 1000 Architectural Simulator. |
* |
* This program is free software; you can redistribute it and/or modify it |
* under the terms of the GNU General Public License as published by the Free |
* Software Foundation; either version 3 of the License, or (at your option) |
* any later version. |
* |
* This program is distributed in the hope that it will be useful, but WITHOUT |
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
* more details. |
* |
* You should have received a copy of the GNU General Public License along |
* with this program. If not, see <http: www.gnu.org/licenses/>. |
*/ |
|
/* ---------------------------------------------------------------------------- |
* Coding conventions |
* |
* A simple rising stack is provided starting at _stack and pointed to by |
* r1. r1 points to the next free word. Only 32-bit registers may be pushed |
* onto the stack. |
* |
* Local labels up to 49 are reserved for macros. Each is used only once in |
* all macros. You can get in a serious mess if you get local label clashing |
* in macros. |
* |
* Arguments to functions are passed in r3 through r8. |
* r9 is the link (return address) |
* r11 is for returning results |
* |
* Only r1 and r2 are preserved across function calls. It is up to the callee |
* to save any other registers required. |
* ------------------------------------------------------------------------- */ |
|
/* ---------------------------------------------------------------------------- |
* Test coverage |
* |
* The l.ff1 and l.fl1 should fine the first and last bits in a register |
* respectively. |
* |
* Problems in this area were reported in Bug 1772. Having fixed the problem, |
* this is (in good software engineering style), a regression test to go with |
* the fix. |
* |
* This is not a comprehensive test of any instruction (yet). |
* |
* Of course what is really needed is a comprehensive instruction test... |
* ------------------------------------------------------------------------- */ |
|
|
#include "inst-set-test.h" |
|
/* ---------------------------------------------------------------------------- |
* A macro to carry out a test of find |
* |
* Arguments |
* opc: The opcode |
* op: First operand value |
* res: Expected result |
* str: Output string |
* ------------------------------------------------------------------------- */ |
#define TEST_FIND(opc, op, res, str) \ |
LOAD_CONST (r4,33) /* Invalid result */ ;\ |
LOAD_CONST (r5,op) /* Load number to analyse */ ;\ |
opc r4,r5 ;\ |
CHECK_RES (str, r4, res) |
|
|
.section .text |
.global _start |
_start: |
|
/* ---------------------------------------------------------------------------- |
* Test of find first 1, l.ff1 |
* ------------------------------------------------------------------------- */ |
_ff1: |
LOAD_STR (r3, "l.ff1\n") |
l.jal _puts |
l.nop |
|
/* Try a range of candidates. */ |
TEST_FIND (l.ff1, 0x00000001, 1, "ff1 (0x00000001) = 1: ") |
TEST_FIND (l.ff1, 0x80000000, 32, "ff1 (0x80000000) = 32: ") |
TEST_FIND (l.ff1, 0x55555555, 1, "ff1 (0x55555555) = 1: ") |
TEST_FIND (l.ff1, 0xaaaaaaaa, 2, "ff1 (0xaaaaaaaa) = 2: ") |
TEST_FIND (l.ff1, 0x00018000, 16, "ff1 (0x00018000) = 16: ") |
TEST_FIND (l.ff1, 0xc0000000, 31, "ff1 (0xc0000000) = 31: ") |
TEST_FIND (l.ff1, 0x00000000, 0, "ff1 (0x00000000) = 0: ") |
|
/* ---------------------------------------------------------------------------- |
* Test of find first 1, l.fl1 |
* ------------------------------------------------------------------------- */ |
_fl1: |
LOAD_STR (r3, "l.fl1\n") |
l.jal _puts |
l.nop |
|
/* Try a range of candidates. */ |
TEST_FIND (l.fl1, 0x00000001, 1, "fl1 (0x00000001) = 1: ") |
TEST_FIND (l.fl1, 0x80000000, 32, "fl1 (0x80000000) = 32: ") |
TEST_FIND (l.fl1, 0x55555555, 31, "fl1 (0x55555555) = 31: ") |
TEST_FIND (l.fl1, 0xaaaaaaaa, 32, "fl1 (0xaaaaaaaa) = 32: ") |
TEST_FIND (l.fl1, 0x00018000, 17, "fl1 (0x00018000) = 17: ") |
TEST_FIND (l.fl1, 0xc0000000, 32, "fl1 (0xc0000000) = 32: ") |
TEST_FIND (l.fl1, 0x00000000, 0, "fl1 (0x00000000) = 0: ") |
|
/* ---------------------------------------------------------------------------- |
* All done |
* ------------------------------------------------------------------------- */ |
_exit: |
LOAD_STR (r3, "Test completed\n") |
l.jal _puts |
l.nop |
|
TEST_EXIT |
or1ksim/testsuite/test-code-or1k/inst-set-test/is-find-test.S
Property changes :
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:keywords
## -0,0 +1 ##
+Id
\ No newline at end of property
Index: or1ksim/testsuite/test-code-or1k/inst-set-test/Makefile.am
===================================================================
--- or1ksim/testsuite/test-code-or1k/inst-set-test/Makefile.am (revision 114)
+++ or1ksim/testsuite/test-code-or1k/inst-set-test/Makefile.am (revision 115)
@@ -43,25 +43,31 @@
# The test programs
check_PROGRAMS = is-add-test \
is-div-test \
+ is-find-test \
is-lws-test \
$(INST_SET_TEST_OLD)
# The new instruction set tests.
-is_add_test_SOURCES = inst-set-test.h \
- is-add-test.S
-is_add_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
-is_add_test_LDADD = inst-set-test.lo
+is_add_test_SOURCES = inst-set-test.h \
+ is-add-test.S
+is_add_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
+is_add_test_LDADD = inst-set-test.lo
-is_div_test_SOURCES = inst-set-test.h \
- is-div-test.S
-is_div_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
-is_div_test_LDADD = inst-set-test.lo
+is_div_test_SOURCES = inst-set-test.h \
+ is-div-test.S
+is_div_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
+is_div_test_LDADD = inst-set-test.lo
-is_lws_test_SOURCES = inst-set-test.h \
- is-lws-test.S
-is_lws_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
-is_lws_test_LDADD = inst-set-test.lo
+is_find_test_SOURCES = inst-set-test.h \
+ is-find-test.S
+is_find_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
+is_find_test_LDADD = inst-set-test.lo
+is_lws_test_SOURCES = inst-set-test.h \
+ is-lws-test.S
+is_lws_test_LDFLAGS = -T$(srcdir)/inst-set-test.ld
+is_lws_test_LDADD = inst-set-test.lo
+
# The old test which builds with warnings and runs with errors
inst_set_test_old_SOURCES = inst-set-test-old.c
/or1ksim/testsuite/test-code-or1k/ChangeLog
1,4 → 1,10
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* inst-set-test/is-add-test.S: Commenting corrected. |
* inst-set-test/is-find-test.S: Created. |
* inst-set-test/Makefile.am: Updated for new tests |
* inst-set-test/Makefile.in: Regenerated. |
|
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* inst-set-test/is-add-test.S: Added tests for l.addi and l.addic |
|
2010-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com> |
/or1ksim/testsuite/or1ksim.tests/inst-set-test.exp
24,46 → 24,8
# ----------------------------------------------------------------------------- |
|
|
# Run the l.lws test |
run_or1ksim "lws-test" \ |
[list "!l.lws" \ |
" l.lws r4,0(r5): r4=0xdeadbeef: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
" l.lws r4,0(r5): r4=0xffffffff: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
" l.lws r4,0(r5): r4=0xffffffff: OK" \ |
" l.lws r4,0(r5): r4=0xdeadbeef: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
"!Test completed" \ |
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-lws-test" |
|
# Run the l.div and l.divu test |
run_or1ksim "lws-test" \ |
[list "!l.div" \ |
"! RANGE exception" \ |
" - caused by: report(0xe0853309);" \ |
"! - SR value: report(0x00008601);" \ |
" 1 / 0 (with error) carry flag set: TRUE" \ |
"!l.divu" \ |
"! RANGE exception" \ |
" - caused by: report(0xe085330a);" \ |
"! - SR value: report(0x00008601);" \ |
" 1 / 0 (with error) carry flag set: TRUE" \ |
"!Test completed" \ |
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-div-test" |
|
# Run the l.add, l.addc, l.addi and l.addic tests |
run_or1ksim "lws-test" \ |
run_or1ksim "add-test" \ |
[list "!l.add" \ |
" 0x00000001 + 0x00000002 = 0x00000003: OK" \ |
" - carry flag set: FALSE" \ |
260,3 → 222,64
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-add-test" |
|
# Run the l.div and l.divu test |
run_or1ksim "div-test" \ |
[list "!l.div" \ |
"! RANGE exception" \ |
" - caused by: report(0xe0853309);" \ |
"! - SR value: report(0x00008601);" \ |
" 1 / 0 (with error) carry flag set: TRUE" \ |
"!l.divu" \ |
"! RANGE exception" \ |
" - caused by: report(0xe085330a);" \ |
"! - SR value: report(0x00008601);" \ |
" 1 / 0 (with error) carry flag set: TRUE" \ |
"!Test completed" \ |
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-div-test" |
|
# Run the l.ff1 and l.fl1 test |
run_or1ksim "find-test" \ |
[list "!l.ff1" \ |
" ff1 (0x00000001) = 1: OK" \ |
" ff1 (0x80000000) = 32: OK" \ |
" ff1 (0x55555555) = 1: OK" \ |
" ff1 (0xaaaaaaaa) = 2: OK" \ |
" ff1 (0x00018000) = 16: OK" \ |
" ff1 (0xc0000000) = 31: OK" \ |
" ff1 (0x00000000) = 0: OK" \ |
"!l.fl1" \ |
" fl1 (0x00000001) = 1: OK" \ |
" fl1 (0x80000000) = 32: OK" \ |
" fl1 (0x55555555) = 31: OK" \ |
" fl1 (0xaaaaaaaa) = 32: OK" \ |
" fl1 (0x00018000) = 17: OK" \ |
" fl1 (0xc0000000) = 32: OK" \ |
" fl1 (0x00000000) = 0: OK" \ |
"!Test completed" \ |
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-find-test" |
|
# Run the l.lws test |
run_or1ksim "lws-test" \ |
[list "!l.lws" \ |
" l.lws r4,0(r5): r4=0xdeadbeef: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
" l.lws r4,0(r5): r4=0xffffffff: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
" l.lws r4,0(r5): r4=0xffffffff: OK" \ |
" l.lws r4,0(r5): r4=0xdeadbeef: OK" \ |
" l.lws r4,0(r5): r4=0x00000000: OK" \ |
" l.lws r4,0(r5): r4=0x7fffffff: OK" \ |
" l.lws r4,0(r5): r4=0x80000000: OK" \ |
"!Test completed" \ |
"!report(0xdeaddead);" \ |
"!exit(0)"] \ |
"inst-set-test.cfg" "inst-set-test/is-lws-test" |
/or1ksim/testsuite/ChangeLog
1,8 → 1,14
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* or1ksim.tests/inst-set-test.exp: Added find tests. |
* README: Updated with new tests. |
|
2010-06-10 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* or1ksim.tests/inst-set-test.exp: Extended addition tests. |
* README: Updated with new tests. |
|
2010-06-09 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* or1ksim.tests/inst-set-test.exp: Added division and addition tests. |
* README: Updated with new tests. |
|
2010-06-06 Jeremy Bennett <jeremy.bennett@embecosm.com> |
* or1ksim.tests/inst-set-test.cfg: Created. |
/or1ksim/testsuite/README
12,8 → 12,8
Tests are provided for the standalone simulator (or1ksim) and for the library |
(libsim.a). |
|
At the time of writing a total of 1,247 tests compile, run and pass. That |
figure is broken down into 983 tests of the standalone simulator and 264 tests |
At the time of writing a total of 1,261 tests compile, run and pass. That |
figure is broken down into 997 tests of the standalone simulator and 264 tests |
of the library |
|
Configuration and make files are provided for further test programs. These |
46,7 → 46,7
Working tests |
============= |
|
A total of 983 tests of standalone Or1ksim: |
A total of 997 tests of standalone Or1ksim: |
|
basic: 8 tests of a wide range of instructions and registers. |
cache: 5 tests of the Or1ksim cache modeling |
67,7 → 67,8
local-global: 1 test of C local and global variables. |
inst-set-test: A collection of tests of individual instructions |
is-add-test 180 tests of the l.add* instructions (Bugs 1771, 1776) |
is-div-test: 4 tests of the l.div and l.divu instruction (Bug 1770). |
is-div-test: 4 tests of the l.div and l.divu instructions (Bug 1770). |
is-find-test: 14 tests of the l.ff1 and l.fl1 instructions (Bug 1772). |
is-lws-test: 13 tests of the l.lws instruction (Bug 1767). |
mem-test: 16 tests of simple memory access. |
mmu: 110 tests of the MMU. |
/or1ksim/configure
1,5 → 1,5
#! /bin/sh |
# From configure.ac Id: configure.ac 1030 2010-06-06 17:29:07Z jeremy using automake version AC_ACVERSION. |
# From configure.ac Id: configure.ac 1032 2010-06-10 17:04:04Z jeremy using automake version AC_ACVERSION. |
# Guess values for system-dependent variables and create Makefiles. |
# Generated by GNU Autoconf 2.63 for or1ksim 2010-06-09. |
# |