URL
https://opencores.org/ocsvn/openrisc/openrisc/trunk
Subversion Repositories openrisc
Compare Revisions
- This comparison shows the changes necessary to convert path
/openrisc/trunk
- from Rev 526 to Rev 527
- ↔ Reverse comparison
Rev 526 → Rev 527
/gnu-src/newlib-1.18.0/newlib/libc/machine/or32/include/or1k-support.h
0,0 → 1,101
/* OR1K support defines |
|
Copyright (C) 2011, ORSoC AB |
Copyright (C) 2008, 2010 Embecosm Limited |
|
Contributor Julius Baxter <julius.baxter@orsoc.se> |
Contributor Jeremy Bennett <jeremy.bennett@embecosm.com> |
|
This file is part of Newlib. |
|
This program is free software; you can redistribute it and/or modify it |
under the terms of the GNU General Public License as published by the Free |
Software Foundation; either version 3 of the License, or (at your option) |
any later version. |
|
This program is distributed in the hope that it will be useful, but WITHOUT |
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
more details. |
|
You should have received a copy of the GNU General Public License along |
with this program. If not, see <http://www.gnu.org/licenses/>. */ |
/* -------------------------------------------------------------------------- */ |
/* This program is commented throughout in a fashion suitable for processing |
with Doxygen. */ |
/* -------------------------------------------------------------------------- */ |
|
/* This machine configuration matches the Or1ksim configuration file in this |
directory. */ |
|
#ifndef OR1K_NEWLIB_SUPPORT__H |
#define OR1K_NEWLIB_SUPPORT__H |
|
/*! External symbols from each board's object file */ |
extern unsigned long _board_clk_freq; |
|
extern unsigned long _board_uart_base; |
extern unsigned long _board_uart_baud; |
extern unsigned long _board_uart_irq; |
|
/*! Check if board has UART - test base address */ |
#define BOARD_HAS_UART (_board_uart_base) |
|
/*! l.nop constants */ |
#define NOP_NOP 0x0000 /* Normal nop instruction */ |
#define NOP_EXIT 0x0001 /* End of simulation */ |
#define NOP_REPORT 0x0002 /* Simple report */ |
/*#define NOP_PRINTF 0x0003 Simprintf instruction (obsolete)*/ |
#define NOP_PUTC 0x0004 /* JPB: Simputc instruction */ |
#define NOP_CNT_RESET 0x0005 /* Reset statistics counters */ |
#define NOP_GET_TICKS 0x0006 /* JPB: Get # ticks running */ |
#define NOP_GET_PS 0x0007 /* JPB: Get picosecs/cycle */ |
#define NOP_REPORT_FIRST 0x0400 /* Report with number */ |
#define NOP_REPORT_LAST 0x03ff /* Report with number */ |
|
/*! Register access macro */ |
#define REG8(add) *((volatile unsigned char *) (add)) |
#define REG16(add) *((volatile unsigned short *) (add)) |
#define REG32(add) *((volatile unsigned long *) (add)) |
|
/*! Interrupt control function prototypes */ |
void or1k_interrupt_handler_add(int, void(*)(void*)); |
void or1k_interrupt_enable(int); |
void or1k_interrupt_disable(int); |
|
/*! Exception handler insertion prototype */ |
void or1k_exception_handler_add(int, void (*)(void)); |
|
/*! SPR access prototypes */ |
void or1k_mtspr (unsigned long int spr, |
unsigned long int value); |
unsigned long int or1k_mfspr (unsigned long int spr); |
|
/*! Simulator prototypes */ |
void or1k_report (unsigned long int value); |
|
/*! Cache control prototypes */ |
void or1k_icache_enable(void); |
void or1k_icache_disable(void); |
void or1k_icache_flush(unsigned long); |
void or1k_dcache_enable(void); |
void or1k_dcache_disable(void); |
void or1k_dcache_flush(unsigned long); |
|
/*! MMU control prototypes */ |
void or1k_immu_enable(void); |
void or1k_immu_disable(void); |
void or1k_dmmu_enable(void); |
void or1k_dmmu_disable(void); |
|
/*! Timer prototypes */ |
void or1k_timer_init(unsigned int hz); |
void or1k_timer_enable(void); |
void or1k_timer_disable(void); |
unsigned long or1k_timer_get_ticks(void); |
void or1k_timer_reset_ticks(void); |
|
/*! Utility function prototypes */ |
unsigned long int or1k_rand(void); |
|
#endif /* OR1K_NEWLIB_SUPPORT__H */ |
/gnu-src/newlib-1.18.0/newlib/libc/machine/or32/or1k-support.c
19,7 → 19,7
You should have received a copy of the GNU General Public License along |
with this program. If not, see <http://www.gnu.org/licenses/>. */ |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
#include "spr-defs.h" |
|
/* Board-specific CPU clk HZ value */ |
/gnu-src/newlib-1.18.0/libgloss/or32/read.c
32,7 → 32,7
#include <errno.h> |
#include <unistd.h> |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
#undef errno |
extern int errno; |
/gnu-src/newlib-1.18.0/libgloss/or32/lseek.c
1,4 → 1,4
/* lseek-uart.c. Implementation of the _lseek syscall for newlib with UART |
/* lseek.c. Implementation of the _lseek syscall for newlib |
|
Copyright (C) 2004, Jacob Bower |
Copyright (C) 2010, Embecosm Limited <info@embecosm.com> |
32,7 → 32,7
#include <errno.h> |
#include <unistd.h> |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
#undef errno |
extern int errno; |
/gnu-src/newlib-1.18.0/libgloss/or32/_exit.c
29,7 → 29,7
with Doxygen. */ |
/* -------------------------------------------------------------------------- */ |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
|
/* -------------------------------------------------------------------------- */ |
/gnu-src/newlib-1.18.0/libgloss/or32/uart.c
29,7 → 29,7
with Doxygen. */ |
/* -------------------------------------------------------------------------- */ |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
#include "uart.h" |
|
/*! Macro to access a UART register */ |
/gnu-src/newlib-1.18.0/libgloss/or32/isatty.c
1,4 → 1,4
/* isatty-uart.c. Implementation of the _isatty syscall for newlib with UART |
/* isatty.c. Implementation of the _isatty syscall for newlib |
|
Copyright (C) 2004, Jacob Bower |
Copyright (C) 2010, Embecosm Limited <info@embecosm.com> |
32,7 → 32,7
#include <errno.h> |
#include <unistd.h> |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
#undef ERRNO |
extern int errno; |
/gnu-src/newlib-1.18.0/libgloss/or32/fstat.c
1,4 → 1,4
/* fstat-uart.c. Implementation of the _fstat syscall for newlib with UART |
/* fstat.c Implementation of the _fstat syscall for newlib |
|
Copyright (C) 2004, Jacob Bower |
Copyright (C) 2010, Embecosm Limited <info@embecosm.com> |
33,7 → 33,7
#include <sys/stat.h> |
#include <unistd.h> |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
#undef errno |
extern int errno; |
/gnu-src/newlib-1.18.0/libgloss/or32/write.c
32,7 → 32,7
#include <errno.h> |
#include <unistd.h> |
|
#include "or1k-newlib-support.h" |
#include "or1k-support.h" |
|
|
#undef errno |