URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

Compare Revisions

This comparison shows the changes necessary to convert path
```
/openrisc/trunk
```
from Rev 761 to Rev 762
↔ Reverse comparison
Compare Path: Rev

With Path: Rev

Rev 761 → Rev 762

/gnu-dev/or1k-gcc/libjava/scripts/unicode-muncher.pl

0,0 → 1,642

gnu-dev/or1k-gcc/libjava/scripts/unicode-muncher.pl Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: gnu-dev/or1k-gcc/libjava/scripts/jar.in =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/jar.in (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/jar.in (revision 762) @@ -0,0 +1,523 @@ +#! @SHELL@ +# Copyright (C) 2006 Free Software Foundation +# Written by Paolo Bonzini. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published +# by the Free Software Foundation; either version 2 of the License, +# or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. +# +# You should have received a copy of the GNU General Public License along +# with this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# POSIX and NLS nuisances, taken from autoconf. +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac +fi +BIN_SH=xpg4; export BIN_SH # for Tru64 +DUALCASE=1; export DUALCASE # for MKS sh + +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# Also make sure CDPATH is empty, and IFS is space, tab, \n in that order. +# Be careful to avoid that editors munge IFS +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH +IFS=" "" "" +" + +: ${TMPDIR=/tmp} +: ${ZIP="@ZIP@"} +: ${UNZIP="@UNZIP@"} +progname="$0" + +# Emit a usage message and exit with error status 1 +usage () { + cat >&2 <&2 + (exit 1); exit 1 +} + +# Usage: copy SRC DEST +# Copy file SRC to directory DEST, which is the staging area of the jar file. +# Fail if it is already present or if it is not a regular file. +copy () { + if test -f "$1"; then + # A simple optimization. Optimistically assuming that ln will work + # cuts 60% of the run-time! + if ln "$1" "$2"/"$1" > /dev/null 2>&1; then + return 0 + fi + + if test -f "$2"/"$1"; then + error "$1": Duplicate entry. + fi + dir=`dirname "$1"` + $mkdir_p "$2"/"$dir" + ln "$1" "$2"/"$1" > /dev/null 2>&1 || cp "$1" "$2"/"$1" + elif test -e "$1"; then + error "$1": Invalid file type. + else + error "$1": File not found. + fi +} + +# Make a temporary directory and store its name in the JARTMP variable. +make_tmp () { + test -n "$JARTMP" && return + + { + JARTMP=`(umask 077 && mktemp -d "$TMPDIR/jarXXXXXX") 2>/dev/null` && + test -n "$JARTMP" && test -d "$JARTMP" + } || { + JARTMP=$TMPDIR/jar$$-$RANDOM + (umask 077 && mkdir "$JARTMP") + } || exit $? + + trap 'exit_status=$? + if test -n "$JARTMP"; then rm -rf "$JARTMP"; fi + exit $exit_status' 0 +} + +# Usage: make_manifest destfile kind [source-manifest] +# Create a manifest file and store it in destfile. KIND can be "default", +# or "user", in which case SOURCE-MANIFEST must be specified as well. +make_manifest () { + dir=`dirname "$1"` + $mkdir_p "$dir" + case $2 in + default) + cat > "$1" <<\EOF +Manifest-Version: 1.0 +Created-By: @VERSION@ + +EOF + ;; + user) + cp "$3" "$1" + ;; + esac +} + +# Usage: set_var var [value] +# Exit with an error if set_var was already called for the same VAR. Else +# set the variable VAR to the value VALUE (or the empty value if no parameter +# is given). +set_var () { + if eval test x\$set_$1 = xset; then + error Incompatible or repeated options. + else + eval $1=\$2 + eval set_$1=set + fi +} + +# Process the arguments, including -C options, and copy the whole tree +# to $JARTMP/files so that zip can be invoked later from there. +make_files () { + change=false + if $process_response_files; then + if test $# = 0; then + while read arg; do + make_files_1 "$arg" + done + else + for infile + do + exec 5<&0 + exec 0< $infile + while read arg; do + make_files_1 "$arg" + done + exec 0<&5 + exec 5<&- + done + fi + else + for arg + do + make_files_1 "$arg" + done + fi + cd "$old_dir" +} + +# Usage: make_files_1 ARG +# Process one argument, ARG. +make_files_1 () { + if $change; then + change=false + if cd "$1"; then + return + else + (exit 1); exit 1 + fi + fi + case "$1" in + -C) + change=: + ;; + -C*) + cd `expr "$1" : '-C$.*$' ` + return + ;; + *) + if test -d "$1"; then + $mkdir_p "$JARTMP"/files/"$1" + find "$1" | while read file; do + if test -d "$file"; then + $mkdir_p "$JARTMP"/files/"$file" + else + copy "$file" "$JARTMP"/files + fi + done + else + copy "$1" "$JARTMP"/files + fi + ;; + esac + cd "$old_dir" +} + +# Same as "jar tf $1". +jar_list () { + $UNZIP -l "$1" | \ + sed '1,/^ ----/d;/^ ----/,$d;s/^ *[0-9]* ..-..-.. ..:.. //' +} + +# Same as "jar tvf $1". +jar_list_verbose () { + $UNZIP -l "$1" | \ + @AWK@ 'BEGIN { yes = 0 } + /^ ----/ { yes = !yes; next } + yes { + size=$1 + split ($2, d, "-") + split ($3, t, ":") + d[3] += (d[3] < 80) ? 2000 : 1900 + timestamp=d[3] " " d[1] " " d[2] " " t[1] " " t[2] " 00" + gsub (/^ *[0-9]* ..-..-.. ..:.. /, "") + printf "%6d %s %s\n", size, strftime ("%a %b %d %H:%M:%S %Z %Y", mktime (timestamp)), $0 + }' +} + +# mkdir -p emulation based on the mkinstalldirs script. +func_mkdir_p () { + for file + do + case $file in + /*) pathcomp=/ ;; + *) pathcomp= ;; + esac + oIFS=$IFS + IFS=/ + set fnord $file + shift + IFS=$oIFS + + errstatus=0 + for d + do + test "x$d" = x && continue + pathcomp=$pathcomp$d + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + mkdir "$pathcomp" || lasterr=$? + test -d "$pathcomp" || errstatus=$lasterr + fi + pathcomp=$pathcomp/ + done + done + return "$errstatus" +} + +# Detect mkdir -p +# On NextStep and OpenStep, the `mkdir' command does not +# recognize any option. It will interpret all options as +# directories to create, and then abort because `.' already +# exists. +if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then + mkdir_p='mkdir -p' +else + mkdir_p='func_mkdir_p' + test -d ./-p && rmdir ./-p + test -d ./--version && rmdir ./--version +fi + +# Process the first command line option. +case "$1" in + -*) commands=`echo X"$1" | sed 's/^X-//' ` ;; + *) commands="$1" +esac +shift + +# Operation to perform on the JAR file +mode=unknown + +# First -C option on the command line +cur_dir=. + +# Base directory for -C options +old_dir=`pwd` +# JAR file to operate on +jarfile= + +# default for no {m,M} option, user for "m" option, none for "M" option +manifest_kind=default + +# "-0" if the "0" option was given +store= + +# true if the "v" option was given +verbose=false + +# true if the non-standard "@" option was given +process_response_files=false + +# An exec command if we need to redirect the zip/unzip commands' output +out_redirect=: + +while test -n "$commands"; do + # Process a letter at a time + command=`expr "$commands" : '$.$'` + commands=`expr "$commands" : '.$.*$'` + case "$command" in + c) + set_var mode create + ;; + t) + set_var mode list + ;; + x) + set_var mode extract + ;; + u) + set_var mode update + ;; + + f) + test $# = 0 && usage + # Multiple "f" options are accepted by Sun's JAR tool. + jarfile="$1" + test -z "$jarfile" && usage + shift + ;; + m) + test $# = 0 && usage + # Multiple "m" options are accepted by Sun's JAR tool, but + # M always overrides m. + test "$manifest_kind" = default && manifest_kind=user + manifest_file="$1" + test -z "$manifest_file" && usage + shift + ;; + 0) + store=-0 + ;; + v) + verbose=: + ;; + i) + # Not yet implemented, and probably never will. + ;; + M) + manifest_kind=none + ;; + C) + test $# = 0 && usage + cur_dir="$1" + shift + ;; + @) + process_response_files=: ;; + *) + usage ;; + esac +done + +set -e + +case "X$jarfile" in + X) + # Work on stdin/stdout. Messages go to stderr, and if we need an input + # JAR file we save it temporarily in the temporary directory. + make_tmp + $mkdir_p "$JARTMP"/out + jarfile="$JARTMP"/out/tmp-stdin.jar + out_redirect='exec >&2' + case $mode in + update|extract|list) + if $process_response_files && test $# = 0; then + error Cannot use stdin for response file. + fi + cat > "$JARTMP"/out/tmp-stdin.jar + ;; + esac + ;; + + X*/*) + # Make an absolute path. + dir=`dirname "$jarfile"` + jarfile=`cd $dir && pwd`/`basename "$jarfile"` + ;; + + X*) + # Make an absolute path from a filename in the current directory. + jarfile=`pwd`/`basename "$jarfile"` + ;; +esac + +# Perform a -C option if given right away. +cd "$cur_dir" + +case $mode in + unknown) + usage + ;; + + extract) + make_tmp + + # Extract the list of files in the JAR file + jar_list "$jarfile" > "$JARTMP"/list + + # If there are files on the command line, expand directories and skip -C + # command line arguments + for arg + do + if $skip; then + skip=false + continue + fi + case "$arg" in + -C) skip=: ;; + -C*) ;; + *) + escaped=`echo "X$arg" | sed 's/^X//; s/[].[^$\\*]/\\\\&/g' ` + grep "^$escaped/" "$JARTMP"/list >> "$JARTMP"/chosen || : + grep "^$escaped\$" "$JARTMP"/list >> "$JARTMP"/chosen || : + esac + done + test -f "$JARTMP"/chosen || cp "$JARTMP"/list "$JARTMP"/chosen + + # Really execute unzip + if $verbose; then + sort < "$JARTMP"/chosen | uniq | xargs $UNZIP -o "$jarfile" | \ + sed -ne 's/^ creating/ created/p' -e 's/^ inflating/extracted/p' + else + sort < "$JARTMP"/chosen | uniq | xargs $UNZIP -o "$jarfile" > /dev/null + fi + ;; + + create) + make_tmp + $mkdir_p "$JARTMP"/out + $mkdir_p "$JARTMP"/files + + # Do not overwrite the JAR file if something goes wrong + tmp_jarfile="$JARTMP"/out/`basename "$jarfile"` + + # Prepare the files in the temporary directory. This is necessary to + # support -C and still save relative paths in the JAR file. + make_files ${1+"$@"} + if test $manifest_kind != none; then + make_manifest "$JARTMP"/files/META-INF/MANIFEST.MF $manifest_kind "$manifest_file" + fi + + # Really execute zip + if $verbose; then + (eval $out_redirect; cd "$JARTMP"/files && $ZIP -rv "$tmp_jarfile" $store .) + else + (cd "$JARTMP/files" && $ZIP -r "$tmp_jarfile" $store . > /dev/null) + fi + test "$jarfile" = "$tmp_jarfile" || mv "$tmp_jarfile" "$jarfile" + ;; + + update) + make_tmp + $mkdir_p "$JARTMP"/files + make_files ${1+"$@"} + + # Same as above, but zip takes care of not overwriting the file + case $manifest_kind in + none) + $verbose && (eval $out_redirect; echo removing manifest) + $ZIP -d "$jarfile" META-INF/MANIFEST.MF > /dev/null 2>&1 || : + ;; + *) + make_manifest "$JARTMP"/files/META-INF/MANIFEST.MF $manifest_kind "$manifest_file" + ;; + esac + if $verbose; then + (eval $out_redirect; cd "$JARTMP"/files && $ZIP -ruv "$jarfile" $store .) + else + (cd "$JARTMP"/files && $ZIP -ru "$jarfile" $store . > /dev/null) + fi + ;; + + list) + # Everything's done in the functions + if $verbose; then + jar_list_verbose "$jarfile" + else + jar_list "$jarfile" + fi ;; +esac + +if test "$out_redirect" != :; then + # Cat back to stdout if necessary + case $mode in + create|update) cat "$JARTMP"/out/tmp-stdin.jar ;; + esac +fi +exit 0 Index: gnu-dev/or1k-gcc/libjava/scripts/encodings.pl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/encodings.pl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/encodings.pl (revision 762) @@ -0,0 +1,79 @@ +# encodings.pl - Download IANA text and compute alias list. +# Assumes you are running this program from gnu/gcj/convert/. +# Output suitable for direct inclusion in IOConverter.java. + +# Map IANA canonical names onto our canonical names. +%map = ( + 'ANSI_X3.4-1968' => 'ASCII', + 'ISO_8859-1:1987' => '8859_1', + 'UTF-8' => 'UTF8', + 'Shift_JIS' => 'SJIS', + 'Extended_UNIX_Code_Packed_Format_for_Japanese' => 'EUCJIS', + 'UTF16-LE' => 'UnicodeLittle', + 'UTF16-BE' => 'UnicodeBig' + ); + +if ($ARGV[0] eq '') +{ + $file = 'character-sets'; + if (! -f $file) + { + # Too painful to figure out how to get Perl to do it. + system 'wget -o .wget-log http://www.iana.org/assignments/character-sets'; + } +} +else +{ + $file = $ARGV[0]; +} + +# Include canonical names in the output. +foreach $key (keys %map) +{ + $output{lc ($key)} = $map{$key}; +} + +open (INPUT, "< $file") || die "couldn't open $file: $!"; + +$body = 0; +$current = ''; +while () +{ + chop; + $body = 1 if /^Name:/; + next unless $body; + + if (/^$/) + { + $current = ''; + next; + } + + ($type, $name) = split (/\s+/); + # Encoding names are case-insensitive. We do all processing on + # the lower-case form. + my $lower = lc ($name); + if ($type eq 'Name:') + { + $current = $map{$name}; + if ($current) + { + $output{$lower} = $current; + } + } + elsif ($type eq 'Alias:') + { + # The IANA list has some ugliness. + if ($name ne '' && $lower ne 'none' && $current) + { + $output{$lower} = $current; + } + } +} + +close (INPUT); + +foreach $key (sort keys %output) +{ + print " hash.put (\"$key\", \"$output{$key}\");\n"; +} Index: gnu-dev/or1k-gcc/libjava/scripts/showval.java =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/showval.java (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/showval.java (revision 762) @@ -0,0 +1,41 @@ +// Show a value given class name and constant name. + +/* Copyright (C) 2000 Free Software Foundation + + This file is part of libgcj. + +This software is copyrighted work licensed under the terms of the +Libgcj License. Please consult the file "LIBGCJ_LICENSE" for +details. */ + +/* Written by Tom Tromey . */ + +// Use like this to print a `static final' value (integers only, not +// strings yet): +// java showval java.awt.geom.AffineTransform.TYPE_IDENTITY +// Prints result like: +// TYPE_IDENTITY = 0 +// In conjunction with a keyboard macro you can do a number of +// constants very easily. + +import java.lang.reflect.*; + +public class showval +{ + public static void main (String[] args) + { + int ch = args[0].lastIndexOf ('.'); + String className = args[0].substring (0, ch); + String constName = args[0].substring (ch + 1); + try + { + Class klass = Class.forName (className); + Field field = klass.getField (constName); + System.out.println (constName + " = " + field.getInt (null)); + } + catch (Throwable _) + { + System.out.println (_); + } + } +} Index: gnu-dev/or1k-gcc/libjava/scripts/unicode-decomp.pl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/unicode-decomp.pl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/unicode-decomp.pl (revision 762) @@ -0,0 +1,146 @@ +#!/usr/bin/perl -w +# unicode-decomp.pl - script to generate database for java.text.Collator +# Copyright (C) 1998, 1999, 2002 Free Software Foundation, Inc. +# +# This file is part of libjava. +# +# This software is copyrighted work licensed under the terms of the +# Libjava License. Please consult the file "LIBJAVA_LICENSE" for +# details. + +# Code for reading UnicodeData.txt and generating the code for +# gnu.java.lang.CharData. For now, the relevant Unicode definition files +# are found in libjava/gnu/gcj/convert/. +# +# Usage: ./unicode-decomp.pl [-n] +# where is obtained from www.unicode.org (named +# UnicodeData-3.0.0.txt for Unicode version 3.0.0), and +# is the final location of include/java-chardecomp.h. +# As of JDK 1.4, use Unicode version 3.0.0 for best results. +# +# If this exits with nonzero status, then you must investigate the +# cause of the problem. +# Diagnostics and other information to stderr. +# With -n, the files are not created, but all processing still occurs. + +# These maps characters to their decompositions. +my %canonical_decomposition = (); +my %full_decomposition = (); + +# Handle `-n' and open output files. +if ($ARGV[0] && $ARGV[0] eq '-n') +{ + shift @ARGV; + $ARGV[1] = '/dev/null'; +} +die "Usage: $0

" unless @ARGV == 2; +open (UNICODE, "< $ARGV[0]") || die "Can't open Unicode attribute file: $!\n"; + +# Process the Unicode file. +$| = 1; +my $count = 0; +print STDERR "Parsing attributes file"; +while () +{ + print STDERR "." unless $count++ % 1000; + chomp; + s/\r//g; + my ($ch, undef, undef, undef, undef, $decomp) = split ';'; + $ch = hex($ch); + + if ($decomp ne '') + { + my $is_full = 0; + my @decomp = (); + foreach (split (' ', $decomp)) + { + if (/^\<.*\>$/) + { + $is_full = 1; + next; + } + push (@decomp, hex ($_)); + } + my $s = pack "n*", @decomp; + if ($is_full) + { + $full_decomposition{$ch} = $s; + } + else + { + $canonical_decomposition{$ch} = $s; + } + } +} + +# Now generate decomposition tables. +open DECOMP, "> $ARGV[1]" or die "Can't open output file: $!\n"; +print STDERR "\nGenerating tables\n"; +print DECOMP <

gnu-dev/or1k-gcc/libjava/scripts/unicode-decomp.pl Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: gnu-dev/or1k-gcc/libjava/scripts/MakeCharTables.java =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/MakeCharTables.java (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/MakeCharTables.java (revision 762) @@ -0,0 +1,212 @@ +/* MakeCharTables.java - converts gnu.java.lang.CharData into + include/java-chartables.h + Copyright (C) 2002 Free Software Foundation, Inc. + +This file is part of GNU Classpath. + +GNU Classpath is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU Classpath is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU Classpath; see the file COPYING. If not, write to the +Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +02110-1301 USA. + +Linking this library statically or dynamically with other modules is +making a combined work based on this library. Thus, the terms and +conditions of the GNU General Public License cover the whole +combination. + +As a special exception, the copyright holders of this library give you +permission to link this library with independent modules to produce an +executable, regardless of the license terms of these independent +modules, and to copy and distribute the resulting executable under +terms of your choice, provided that you also meet, for each linked +independent module, the terms and conditions of the license of that +module. An independent module is a module which is not derived from +or based on this library. If you modify this library, you may extend +this exception to your version of the library, but you are not +obligated to do so. If you do not wish to do so, delete this +exception statement from your version. */ + +import gnu.java.lang.CharData; + +public class MakeCharTables implements CharData +{ + public static void main(String[] args) + { + System.out.println("/* java-chartables.h -- Character tables for java.lang.Character -*- c++ -*-\n" + + " Copyright (C) 2002 Free Software Foundation, Inc.\n" + + " *** This file is generated by scripts/MakeCharTables.java ***\n" + + "\n" + + "This file is part of GNU Classpath.\n" + + "\n" + + "GNU Classpath is free software; you can redistribute it and/or modify\n" + + "it under the terms of the GNU General Public License as published by\n" + + "the Free Software Foundation; either version 2, or (at your option)\n" + + "any later version.\n" + + "\n" + + "GNU Classpath is distributed in the hope that it will be useful, but\n" + + "WITHOUT ANY WARRANTY; without even the implied warranty of\n" + + "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\n" + + "General Public License for more details.\n" + + "\n" + + "You should have received a copy of the GNU General Public License\n" + + "along with GNU Classpath; see the file COPYING. If not, write to the\n" + + "Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA\n" + + "02110-1301 USA.\n" + + "\n" + + "Linking this library statically or dynamically with other modules is\n" + + "making a combined work based on this library. Thus, the terms and\n" + + "conditions of the GNU General Public License cover the whole\n" + + "combination.\n" + + "\n" + + "As a special exception, the copyright holders of this library give you\n" + + "permission to link this library with independent modules to produce an\n" + + "executable, regardless of the license terms of these independent\n" + + "modules, and to copy and distribute the resulting executable under\n" + + "terms of your choice, provided that you also meet, for each linked\n" + + "independent module, the terms and conditions of the license of that\n" + + "module. An independent module is a module which is not derived from\n" + + "or based on this library. If you modify this library, you may extend\n" + + "this exception to your version of the library, but you are not\n" + + "obligated to do so. If you do not wish to do so, delete this\n" + + "exception statement from your version. */\n" + + "\n" + + "#ifndef __JAVA_CHARTABLES_H__\n" + + "#define __JAVA_CHARTABLES_H__\n" + + "\n" + + "// These tables are automatically generated by scripts/MakeCharTables.java.\n" + + "// This is in turn parsing gnu.java.lang.CharData, which is generated by\n" + + "// scripts/unicode-muncher.pl. The Unicode data comes from\n" + + "// www.unicode.org; this header is based on\n" + + "// " + SOURCE + ". JDK 1.4 uses Unicode version 3.0.0.\n" + + "// DO NOT EDIT the tables. Instead, fix the upstream scripts and run\n" + + "// them again.\n" + + "\n" + + "// The data is stored in C style arrays of the appropriate CNI types, to\n" + + "// guarantee that the data is constant and non-relocatable. The field\n" + + "// blocks stores the offset of a block of 2\n" + + "// characters within data. The data field, in turn, stores\n" + + "// information about each character in the low order bits, and an offset\n" + + "// into the attribute tables upper, lower,\n" + + "// numValue, and direction. Notice that the\n" + + "// attribute tables are much smaller than 0xffff entries; as many characters\n" + + "// in Unicode share common attributes. Finally, there is a listing for\n" + + "// title exceptions (most characters just have the same title\n" + + "// case as upper case).\n" + + "\n" + + "// This file should only be included by natCharacter.cc\n" + + "\n" + + "/**\n" + + " * The character shift amount to look up the block offset. In other words,\n" + + " * (char) (blocks[ch >> SHIFT] + ch) is the index where\n" + + " * ch is described in data.\n" + + " */\n" + + "#define SHIFT " + SHIFT); + + convertString("/**\n" + + " * The mapping of character blocks to their location in data.\n" + + " * Each entry has been adjusted so that a modulo 16 sum with the desired\n" + + " * character gives the actual index into data.\n" + + " */", + char.class, "blocks", BLOCKS); + + convertString("/**\n" + + " * Information about each character. The low order 5 bits form the\n" + + " * character type, the next bit is a flag for non-breaking spaces, and the\n" + + " * next bit is a flag for mirrored directionality. The high order 9 bits\n" + + " * form the offset into the attribute tables. Note that this limits the\n" + + " * number of unique character attributes to 512, which is not a problem\n" + + " * as of Unicode version 3.2.0, but may soon become one.\n" + + " */", + char.class, "data", DATA); + + convertString("/**\n" + + " * This is the attribute table for computing the numeric value of a\n" + + " * character. The value is -1 if Unicode does not define a value, -2\n" + + " * if the value is not a positive integer, otherwise it is the value.\n" + + " */", + short.class, "numValue", NUM_VALUE); + + convertString("/**\n" + + " * This is the attribute table for computing the uppercase representation\n" + + " * of a character. The value is the difference between the character and\n" + + " * its uppercase version.\n" + + " */", + short.class, "upper", UPPER); + + convertString("/**\n" + + " * This is the attribute table for computing the lowercase representation\n" + + " * of a character. The value is the difference between the character and\n" + + " * its lowercase version.\n" + + " */", + short.class, "lower", LOWER); + + convertString("/**\n" + + " * This is the attribute table for computing the directionality class\n" + + " * of a character. At present, the value is in the range 0 - 18 if the\n" + + " * character has a direction, otherwise it is -1.\n" + + " */", + byte.class, "direction", DIRECTION); + + convertString("/**\n" + + " * This is the listing of titlecase special cases (all other character\n" + + " * can use upper to determine their titlecase). The listing\n" + + " * is a sequence of character pairs; converting the first character of the\n" + + " * pair to titlecase produces the second character.\n" + + " */", + char.class, "title", TITLE); + + System.out.println(); + System.out.println("#endif /* __JAVA_CHARTABLES_H__ */"); + } + + private static void convertString(String header, Class type, + String name, String field) + { + System.out.println(); + System.out.println(header); + System.out.println("static const j" + type.getName() + " " + name + + "[] = {"); + char[] data = field.toCharArray(); + int wrap; + if (type == char.class) + wrap = 10; + else if (type == byte.class) + wrap = 21; + else if (type == short.class) + wrap = 13; + else + throw new Error("Unexpeced type"); + for (int i = 0; i < data.length; i += wrap) + { + System.out.print(" "); + for (int j = 0; j < wrap; j++) + { + if (i + j >= data.length) + break; + System.out.print(" "); + if (type == char.class) + System.out.print((int) data[i + j]); + else if (type == byte.class) + System.out.print((byte) data[i + j]); + else if (type == short.class) + System.out.print((short) data[i + j]); + System.out.print(","); + } + System.out.println(); + } + System.out.println(" };\n" + + "/** Length of " + name + ". */\n" + + "static const int " + name + "_length = " + + data.length + ";"); + } +} Index: gnu-dev/or1k-gcc/libjava/scripts/unicode-to-chartables.pl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/unicode-to-chartables.pl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/unicode-to-chartables.pl (revision 762) @@ -0,0 +1,802 @@ +#!/usr/bin/perl -w +# unicode-to-chartables.pl -- generate Unicode database for java.lang.Character +# Copyright (C) 1998, 2002, 2004, 2006 Free Software Foundation, Inc. +# +# This file is part of GNU Classpath. +# +# GNU Classpath is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Classpath is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Classpath; see the file COPYING. If not, write to the +# Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301 USA. +# +# Linking this library statically or dynamically with other modules is +# making a combined work based on this library. Thus, the terms and +# conditions of the GNU General Public License cover the whole +# combination. +# +# As a special exception, the copyright holders of this library give you +# permission to link this library with independent modules to produce an +# executable, regardless of the license terms of these independent +# modules, and to copy and distribute the resulting executable under +# terms of your choice, provided that you also meet, for each linked +# independent module, the terms and conditions of the license of that +# module. An independent module is a module which is not derived from +# or based on this library. If you modify this library, you may extend +# this exception to your version of the library, but you are not +# obligated to do so. If you do not wish to do so, delete this +# exception statement from your version. + +# Code for reading UnicodeData-4.0.0.txt and SpecialCasing-4.0.0.txt to generate +# the code for java-chartables.h. The relevant files can be found here: +# +# http://www.unicode.org/Public/4.0-Update/UnicodeData-4.0.0.txt +# http://www.unicode.org/Public/4.0-Update/SpecialCasing-4.0.0.txt +# +# Inspired by code from Jochen Hoenicke. +# author Eric Blake +# Unicode 4.0.0 support by Anthony Balkissoon +# +# Usage: ./unicode-to-chartables.pl +# where is obtained from www.unicode.org (named +# UnicodeData-4.0.0.txt for Unicode version 4.0.0), +# is obtained from www.unicode too (named SpecialCasing-4.0.0.txt for Unicode +# version 4.0.0), and is the final location for the header file +# java-chartables.h. As of JDK 1.5, use Unicode version 4.0.0 +# for best results. + + +## +## Return the given variable interpreted as a 16 bit signed number. +## +sub cShort($) { + my ($char) = @_; + return unpack "s", pack "I", $char; +} + +## +## Convert the text UnicodeData file from www.unicode.org into a header file +## interface with arrays holding the compressed information. +## +my @TYPECODES = qw(Cn Lu Ll Lt Lm Lo Mn Me Mc Nd Nl No Zs Zl Zp Cc Cf + SKIPPED Co Cs Pd Ps Pe Pc Po Sm Sc Sk So Pi Pf); +my @DIRCODES = qw(L R AL EN ES ET AN CS NSM BN B S WS ON LRE LRO RLE RLO PDF); + +my $NOBREAK_FLAG = 32; +my $MIRRORED_FLAG = 64; + +my %special = (); + +# infoArray is an array where each element is a list of character information +# for characters in a plane. The index of each list is equal to the plane +# that it corresponds to even though most of these lists will currently be +# empty. This is done so that that this script can be easily modified to +# accomodate future versions of Unicode. +my @infoArray = \((), (), (), (), (), (), (), (), + (), (), (), (), (), (), (), (), ()); + +# info is a reference to one of the lists in infoArray, depending on which +# plane we're currently parsing. +my $info; + +# largeNums is an array of numerical values that are too large to fit +# into the 16 bit char where most numerical values are stored. +# What is stored in the char then is a number N such that (-N - 3) is +# the index into largeNums where the numerical value can be found. +my @largeNums = (); + +my $titlecase = ""; +my $count = 0; +my $range = 0; + +die "Usage: $0

" + unless @ARGV == 3; +$| = 1; +print "GNU Classpath Unicode Attribute Database Generator 2.1\n"; +print "Copyright (C) 1998, 2002 Free Software Foundation, Inc.\n"; + + +################################################################################ +################################################################################ +# Stage 0: Parse the special casing file +print "Parsing special casing file\n"; +open (SPECIAL, "< $ARGV[1]") || die "Can't open special casing file: $!\n"; +while () { + next if /^\#/; + my ($ch, undef, undef, $upper) = split / *; */; + + # This grabs only the special casing for multi-char uppercase. Note that + # there are no multi-char lowercase, and that Sun ignores multi-char + # titlecase rules. This script omits 3 special cases in Unicode 3.0.0, + # which must be hardcoded in java.lang.String: + # \u03a3 (Sun ignores this special case) + # \u0049 - lowercases to \u0131, but only in Turkish locale + # \u0069 - uppercases to \u0130, but only in Turkish locale + next unless defined $upper and $upper =~ / /; + $special{hex $ch} = [map {hex} split ' ', $upper]; +} + +close SPECIAL; + + +################################################################################ +################################################################################ +## Stage 1: Parse the attribute file +print "Parsing attributes file"; +open (UNICODE, "< $ARGV[0]") || die "Can't open Unicode attribute file: $!\n"; +while () { + print "." unless $count++ % 1000; + chomp; + s/\r//g; + my ($ch, $name, $category, undef, $bidir, $decomp, undef, undef, $numeric, + $mirrored, undef, undef, $upcase, $lowcase, $title) = split ';'; + $ch = hex($ch); + + # plane tells us which Unicode code plane we're currently in and is an + # index into infoArray. + my $plane = int($ch / 0x10000); + my $planeBase = $plane * 0x10000; + $info = \@{$infoArray[$plane]}; + + my ($type, $numValue, $upperchar, $lowerchar, $direction); + + $type = 0; + while ($category !~ /^$TYPECODES[$type]$/) { + if (++$type == @TYPECODES) { + die "$ch: Unknown type: $category"; + } + } + $type |= $NOBREAK_FLAG if ($decomp =~ /noBreak/); + $type |= $MIRRORED_FLAG if ($mirrored =~ /Y/); + + if ($numeric =~ /^[0-9]+$/) { + $numValue = $numeric; + # If numeric takes more than 16 bits to store we want to store that + # number in a separate array and store a number N in numValue such + # that (-N - 3) is the offset into the separate array containing the + # large numerical value. + if ($numValue >= 0x7fff) { + $numValue = -3 - @largeNums; + push @largeNums, $numeric; + } + } elsif ($numeric eq "") { + # Special case sequences of 'a'-'z' + if ($ch >= 0x0041 && $ch <= 0x005a) { + $numValue = $ch - 0x0037; + } elsif ($ch >= 0x0061 && $ch <= 0x007a) { + $numValue = $ch - 0x0057; + } elsif ($ch >= 0xff21 && $ch <= 0xff3a) { + $numValue = $ch - 0xff17; + } elsif ($ch >= 0xff41 && $ch <= 0xff5a) { + $numValue = $ch - 0xff37; + } else { + $numValue = -1; + } + } else { + $numValue = -2; + } + + $upperchar = $upcase ? hex($upcase) - $ch : 0; + $lowerchar = $lowcase ? hex($lowcase) - $ch : 0; + if ($title ne $upcase) { + my $titlechar = $title ? hex($title) : $ch; + $titlecase .= pack("n2", $ch, $titlechar); + } + + $direction = 0; + while ($bidir !~ /^$DIRCODES[$direction]$/) { + if (++$direction == @DIRCODES) { + $direction = -1; + last; + } + } + $direction <<= 2; + $direction += $#{$special{$ch}} if defined $special{$ch}; + + if ($range) { + die "Expecting end of range at $ch\n" unless $name =~ /Last>$/; + for ($range + 1 .. $ch - 1) { + $info->[$_ - $planeBase] = pack("n5", $type, $numValue, $upperchar, + $lowerchar, $direction); + } + $range = 0; + } elsif ($name =~ /First>$/) { + $range = $ch; + } + # Store all this parsed information into the element in infoArray that info + # points to. + $info->[$ch - $planeBase] = pack("n5", $type, $numValue, $upperchar, $lowerchar, + $direction); +} +close UNICODE; + + +################################################################################ +################################################################################ +## Stage 2: Compress the data structures +printf "\nCompressing data structures"; +$count = 0; + +# data is a String that will be used to create the DATA String containing +# character information and offsets into the attribute tables. +my @data = (); + +# charhashArray is an array of hashtables used so that we can reuse character +# attributes when characters share the same attributes ... this makes our +# attribute tables smaller. charhash is a pointer into this array. +my @charhashArray = ({}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}, {}); +my $charhash = (); + +# charinfoArray is an array of arrays, one per plane, for storing character +# information. charinfo is a pointer into this array. +my @charinfoArray = \((), (), (), (), (), (), (), (), + (), (), (), (), (), (), (), (), ()); +my $charinfo; + +# charlen is an array, one element per plane, that tells us how many unique +# character attributes there are for that plane. +my @charlen = (); + +for my $plane (0 .. 0x10) { + $info = \@{$infoArray[$plane]}; + my $planeBase = $plane * 0x10000; + $charhash = \%{$charhashArray[$plane]}; + $charinfo = \@{$charinfoArray[$plane]}; + + for my $ch ($planeBase .. $planeBase + 0xffff) { + my $index = $ch - $planeBase; + print "." unless $count++ % 0x1000; + $info->[$index] = pack("n5", 0, -1, 0, 0, -4) unless defined $info->[$index]; + + my ($type, $numVal, $upper, $lower, $direction) = unpack("n5", $info->[$index]); + if (! exists $charhash->{$info->[$index]}) { + # If we entered this loop that means the character we're looking at + # now has attributes that are unique from those that we've looked + # at so far for this plane. So we push its attributes into charinfo + # and store in charhash the offset into charinfo where these + # attributes can later be found. + push @{$charinfo}, [ $numVal, $upper, $lower, $direction ]; + $charhash->{$info->[$index]} = @{$charinfo} - 1; + # When the file is generaged, the number we just stored in charhas + # will be the upper 9 bits in the DATA String that are an offset + # into the attribute tables. + } + $data[$plane] .= pack("n", ($charhash->{$info->[$index]} << 7) | $type); + } + $charlen[$plane] = scalar(@{$charinfoArray[$plane]}); +} + +# the shift that results in the best compression of the table. This is an array +# because different shifts are better for the different tables for each plane. +my @bestshift; + +# an initial guess. +my $bestest = 1000000; +my @bestblkstr; +my @blksize = (); + +for my $plane (0 .. 0x10) { + print "\n\nplane: $plane\n"; + print "Unique character entries: $charlen[$plane]\n"; + $bestest = 1000000; + for my $i (3 .. 8) { + my $blksize = 1 << $i; + my %blocks = (); + my @blkarray = (); + my ($j, $k); + print "shift: $i"; + + for ($j = 0; $j < 0x10000; $j += $blksize) { + my $blkkey = substr $data[$plane], 2 * $j, 2 * $blksize; + if (! exists $blocks{$blkkey}) { + push @blkarray, $blkkey; + $blocks{$blkkey} = $#blkarray; + } + } + + my $blknum = @blkarray; + my $blocklen = $blknum * $blksize; + printf " before %5d", $blocklen; + + # Now we try to pack the blkarray as tight as possible by finding matching + # heads and tails. + for ($j = $blksize - 1; $j > 0; $j--) { + my %tails = (); + for $k (0 .. $#blkarray) { + next unless defined $blkarray[$k]; + my $len = length $blkarray[$k]; + my $tail = substr $blkarray[$k], $len - $j * 2; + if (exists $tails{$tail}) { + push @{$tails{$tail}}, $k; + } else { + $tails{$tail} = [ $k ]; + } + } + + # tails are calculated, now calculate the heads and merge. + BLOCK: + for $k (0 .. $#blkarray) { + next unless defined $blkarray[$k]; + my $tomerge = $k; + while (1) { + my $head = substr($blkarray[$tomerge], 0, $j * 2); + my $entry = $tails{$head}; + next BLOCK unless defined $entry; + + my $other = shift @{$entry}; + if ($other == $tomerge) { + if (@{$entry}) { + push @{$entry}, $other; + $other = shift @{$entry}; + } else { + push @{$entry}, $other; + next BLOCK; + } + } + if (@{$entry} == 0) { + delete $tails{$head}; + } + + # a match was found + my $merge = $blkarray[$other] + . substr($blkarray[$tomerge], $j * 2); + $blocklen -= $j; + $blknum--; + + if ($other < $tomerge) { + $blkarray[$tomerge] = undef; + $blkarray[$other] = $merge; + my $len = length $merge; + my $tail = substr $merge, $len - $j * 2; + $tails{$tail} = [ map { $_ == $tomerge ? $other : $_ } + @{$tails{$tail}} ]; + next BLOCK; + } + $blkarray[$tomerge] = $merge; + $blkarray[$other] = undef; + } + } + } + my $blockstr; + for $k (0 .. $#blkarray) { + $blockstr .= $blkarray[$k] if defined $blkarray[$k]; + } + + die "Unexpected $blocklen" if length($blockstr) != 2 * $blocklen; + my $estimate = 2 * $blocklen + (0x20000 >> $i); + + printf " after merge %5d: %6d bytes\n", $blocklen, $estimate; + if ($estimate < $bestest) { + $bestest = $estimate; + $bestshift[$plane] = $i; + $bestblkstr[$plane] = $blockstr; + } + } + $blksize[$plane] = 1 << $bestshift[$plane]; + print "best shift: ", $bestshift[$plane]; + print " blksize: ", $blksize[$plane]; +} +my @blocksArray = \((), (), (), (), (), (), (), (), + (), (), (), (), (), (), (), (), ()); + +for my $plane (0 .. 0x10) { + for (my $j = 0; $j < 0x10000; $j += $blksize[$plane]) { + my $blkkey = substr $data[$plane], 2 * $j, 2 * $blksize[$plane]; + my $index = index $bestblkstr[$plane], $blkkey; + while ($index & 1) { + die "not found: $j" if $index == -1; + $index = index $bestblkstr[$plane], $blkkey, $index + 1; + } + push @{$blocksArray[$plane]}, ($index / 2 - $j) & 0xffff; + } +} + + +################################################################################ +################################################################################ +## Stage 3: Generate the file +for my $plane (0 .. 0x10) { + die "UTF-8 limit of blocks may be exceeded for plane $plane: " . scalar(@{$blocksArray[$plane]}) . "\n" + if @{$blocksArray[$plane]} > 0xffff / 3; + die "UTF-8 limit of data may be exceeded for plane $plane: " . length($bestblkstr[$plane]) . "\n" + if length($bestblkstr[$plane]) > 0xffff / 3; +} + +{ + print "\nGenerating $ARGV[2]."; + my ($i, $j); + + open OUTPUT, "> $ARGV[2]" or die "Failed creating output file: $!\n"; + print OUTPUT <blocks stores the offset of a block of 2^SHIFT +// characters within data. The data field, in turn, stores +// information about each character in the low order bits, and an offset +// into the attribute tables upper, lower, +// numValue, and direction. Notice that the +// attribute tables are much smaller than 0xffff entries; as many characters +// in Unicode share common attributes. Finally, there is a listing for +// title exceptions (most characters just have the same title +// case as upper case). + +// This file should only be included by natCharacter.cc + +/** + * The array containing the numeric values that are too large to be stored as + * chars in NUM_VALUE. NUM_VALUE in this case will contain a negative integer + * N such that LARGENUMS[-N - 3] contains the correct numeric value. + */ +EOF + print OUTPUT "static const jint largenums[] = {\n "; + for ($i = 0; $i < @largeNums; $i++) { + print OUTPUT $largeNums[$i], ", "; + } + print OUTPUT "}"; + print OUTPUT <(char) (blocks[p][off >> SHIFT[p]] + off) is the index where + * ch is described in data, where off + * is ch & 0xffff and p is the plane the character belongs to. + */ +EOF + print OUTPUT "static const int shift[] = {\n "; + for ($i = 0; $i < @bestshift; $i++) { + print OUTPUT $bestshift[$i], ", "; + } + print OUTPUT "}"; + print OUTPUT <data. + * Each entry has been adjusted so that a modulo 16 sum with the desired + * character gives the actual index into data. + */ +EOF + for ($plane = 0; $plane <= 0x10; $plane++) { + # The following if statement handles the cases of unassigned planes + # specially so we don't waste space with unused Strings. As of + # Unicode version 4.0.0 only planes 0, 1, 2, and 14 are used. If + # you are updating this script to work with a later version of + # Unicode you may have to alter this if statement. + next if ($plane > 2 && $plane != 14) ; + + print OUTPUT "static const jchar blocks", $plane, "[] = {\n"; + for ($i = 0; $i < @{$blocksArray[$plane]} / 10; $i++) { + print OUTPUT " "; + for $j (0 .. 9) { + last if @{$blocksArray[$plane]} <= $i * 10 + $j; + my $val = $blocksArray[$plane]->[$i * 10 + $j]; + print OUTPUT $val, ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int blocks_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT scalar(@{$blocksArray[$plane]}), ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT < 2 && $plane != 14); + + print OUTPUT "static const jchar data", $plane, "[] = {\n"; + my $len = length($bestblkstr[$plane]) / 2; + for ($i = 0; $i < $len / 10; $i++) { + print OUTPUT " "; + for $j (0 .. 9) { + last if $len <= $i * 10 + $j; + my $val = unpack "n", substr($bestblkstr[$plane], 2 * ($i * 10 + $j), 2); + print OUTPUT $val, ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int data_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT length($bestblkstr[$plane]) / 2, ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT < 2 && $plane != 14); + + print OUTPUT "static const jshort numValue", $plane, "[] = {\n"; + $len = @{$charinfoArray[$plane]}; + for ($i = 0; $i < $len / 13; $i++) { + print OUTPUT " "; + for $j (0 .. 12) { + last if $len <= $i * 13 + $j; + my $val = $charinfoArray[$plane]->[$i * 13 + $j][0]; + print OUTPUT cShort($val), ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int numValue_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT scalar(@{$charinfoArray[$plane]}), ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT < 2 && $plane != 14); + + print OUTPUT "static const jshort upper", $plane, "[] = {\n"; + $len = @{$charinfoArray[$plane]}; + for ($i = 0; $i < $len / 13; $i++) { + print OUTPUT " "; + for $j (0 .. 12) { + last if $len <= $i * 13 + $j; + my $val = $charinfoArray[$plane]->[$i * 13 + $j][1]; + print OUTPUT cShort($val), ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int upper_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT scalar(@{$charinfoArray[$plane]}), ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT < 2 && $plane != 14); + + print OUTPUT "static const jshort lower", $plane, "[] = {\n"; + $len = @{$charinfoArray[$plane]}; + for ($i = 0; $i < $len / 13; $i++) { + print OUTPUT " "; + for $j (0 .. 12) { + last if $len <= $i * 13 + $j; + my $val = $charinfoArray[$plane]->[$i * 13 + $j][2]; + print OUTPUT cShort($val), ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int lower_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT scalar(@{$charinfoArray[$plane]}), ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT < 2 && $plane != 14); + + print OUTPUT "static const jbyte direction", $plane, "[] = {\n"; + $len = @{$charinfoArray[$plane]}; + for ($i = 0; $i < $len / 19; $i++) { + print OUTPUT " "; + for $j (0 .. 18) { + last if $len <= $i * 19 + $j; + my $val = $charinfoArray[$plane]->[$i * 19 + $j][3]; + $val >>= 2; + if ($val < 0 || $val > 18){ + $val = -1; + } + print OUTPUT cShort($val), ", "; + } + print OUTPUT "\n"; + } + print OUTPUT "};\n\n"; + } + print OUTPUT "static const int direction_length[] = {\n "; + for ($plane = 0; $plane <= 0x10; $plane++) { + if ($plane > 2 && $plane != 14){ + print OUTPUT "-1, "; + } + else { + print OUTPUT scalar(@{$charinfoArray[$plane]}), ", "; + } + } + print OUTPUT "};\n"; + print OUTPUT <upper to determine their titlecase). The listing + * is a sequence of character pairs; converting the first character of the + * pair to titlecase produces the second character. + */ +static const jchar title[] = { +EOF + + $len = length($titlecase) / 2; + for ($i = 0; $i < $len / 10; $i++) { + print OUTPUT $i ? "\n " : " "; + for $j (0 .. 9) { + last if $len <= $i * 10 + $j; + my $val = unpack "n", substr($titlecase, 2 * ($i * 10 + $j), 2); + print OUTPUT $val, ", "; + } + } + + print OUTPUT "\n };"; + print OUTPUT "\n/** Length of title. */\nstatic const int title_length = ", $len; + print OUTPUT <

gnu-dev/or1k-gcc/libjava/scripts/unicode-to-chartables.pl Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: gnu-dev/or1k-gcc/libjava/scripts/classes.pl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/classes.pl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/classes.pl (revision 762) @@ -0,0 +1,93 @@ +# classes.pl - A perl program to generate most of the contents of +# javaprims.h automatically. + +# Copyright (C) 1998, 1999, 2000, 2002, 2005, 2006, 2007 Free Software +# Foundation +# +# This file is part of libgcj. +# +# This software is copyrighted work licensed under the terms of the +# Libgcj License. Please consult the file "LIBGCJ_LICENSE" for +# details. + +# Usage: cd /classpath/lib ; perl ../../scripts/classes.pl. + +use DirHandle; + +if (-d 'java') +{ + # Ok here. +} +elsif (-d '../java') +{ + chdir ('..'); +} +else +{ + die "couldn't find java directory\n"; +} + +&scan ('java', 2); + +exit 0; + +sub scan +{ + local ($dir, $indent) = @_; + local (@subdirs) = (); + local (%classes) = (); + + local ($d) = new DirHandle $dir; + local (*JFILE); + local ($name); + if (defined $d) + { + while (defined ($name = $d->read)) + { + next if $name eq 'CVS'; + next if $name eq '.svn'; + next if $name eq '.'; + next if $name eq '..'; + if ($dir eq 'java' + && $name ne 'lang' + && $name ne 'util' + && $name ne 'io') + { + # We only generate decls for java.lang, java.io, and + # java.util. + next; + } + if (-d ($dir . '/' . $name)) + { + push (@subdirs, $name); + next; + } + next unless $name =~ s/\.class$//; + $classes{$name} = 1; + } + + undef $d; + } + + local ($spaces) = ' ' x $indent; + local ($classname); + ($classname = $dir) =~ s/^.*\///; + print $spaces, "namespace ", $classname, "\n"; + print $spaces, "{\n"; + + foreach (sort keys %classes) + { + print $spaces, " class ", $_, ";\n"; + } + print "\n" if scalar @classes > 0 && scalar @subdirs > 0; + + local ($first) = 1; + foreach (sort @subdirs) + { + print "\n" unless $first; + $first = 0; + &scan ("$dir/$_", $indent + 2); + } + + print $spaces, "}\n"; +} Index: gnu-dev/or1k-gcc/libjava/scripts/unicode-blocks.pl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/unicode-blocks.pl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/unicode-blocks.pl (revision 762) @@ -0,0 +1,210 @@ +#!/usr/bin/perl -w +# unicode-blocks.pl -- Script to generate java.lang.Character.UnicodeBlock +# Copyright (C) 2002 Free Software Foundation, Inc. +# +# This file is part of GNU Classpath. +# +# GNU Classpath is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# GNU Classpath is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Classpath; see the file COPYING. If not, write to the +# Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA +# 02110-1301 USA. +# +# Linking this library statically or dynamically with other modules is +# making a combined work based on this library. Thus, the terms and +# conditions of the GNU General Public License cover the whole +# combination. +# +# As a special exception, the copyright holders of this library give you +# permission to link this library with independent modules to produce an +# executable, regardless of the license terms of these independent +# modules, and to copy and distribute the resulting executable under +# terms of your choice, provided that you also meet, for each linked +# independent module, the terms and conditions of the license of that +# module. An independent module is a module which is not derived from +# or based on this library. If you modify this library, you may extend +# this exception to your version of the library, but you are not +# obligated to do so. If you do not wish to do so, delete this +# exception statement from your version. + + +# Code for reading Blocks.txt and generating (to standard out) the code for +# java.lang.Character.UnicodeBlock, for pasting into java/lang/Character.java. +# You should probably check that the results are accurate to the +# specification, but I made sure it works OOB for Unicode 3.0.0 and JDK 1.4. +# As the grammar for the Blocks.txt file is changing in Unicode 3.2.0, you +# will have to tweak this some for future use. For now, the relevant +# Unicode definition files are found in libjava/gnu/gcj/convert/. +# +# author Eric Blake +# +# usage: unicode-blocks.pl +# where is obtained from www.unicode.org (named Blocks-3.txt +# for Unicode version 3.0.0). + + +die "Usage: $0 " unless @ARGV == 1; +open (BLOCKS, $ARGV[0]) || die "Can't open Unicode block file: $!\n"; + +# A hash of added fields and the JDK they were added in, to automatically +# print @since tags. Maintaining this is optional (and tedious), but nice. +my %additions = ("SYRIAC" => "1.4", + "THAANA" => "1.4", + "SINHALA" => "1.4", + "MYANMAR" => "1.4", + "ETHIOPIC" => "1.4", + "CHEROKEE" => "1.4", + "UNIFIED_CANADIAN_ABORIGINAL_SYLLABICS" => "1.4", + "OGHAM" => "1.4", + "RUNIC" => "1.4", + "KHMER" => "1.4", + "MONGOLIAN" => "1.4", + "BRAILLE_PATTERNS" => "1.4", + "CJK_RADICALS_SUPPLEMENT" => "1.4", + "KANGXI_RADICALS" => "1.4", + "IDEOGRAPHIC_DESCRIPTION_CHARACTERS" => "1.4", + "BOPOMOFO_EXTENDED" => "1.4", + "CJK_UNIFIED_IDEOGRAPHS_EXTENSION_A" => "1.4", + "YI_SYLLABLES" => "1.4", + "YI_RADICALS" => "1.4", + ); + +print <<'EOF'; + /** + * A family of character subsets in the Unicode specification. A character + * is in at most one of these blocks. + * + * This inner class was generated automatically from + * $ARGV[0], by some perl scripts. + * This Unicode definition file can be found on the + * http://www.unicode.org website. + * JDK 1.4 uses Unicode version 3.0.0. + * + * @author scripts/unicode-blocks.pl (written by Eric Blake) + * @since 1.2 + */ + public static final class UnicodeBlock extends Subset + { + /** The start of the subset. */ + private final char start; + + /** The end of the subset. */ + private final char end; + + /** + * Constructor for strictly defined blocks. + * + * @param start the start character of the range + * @param end the end character of the range + * @param name the block name + */ + private UnicodeBlock(char start, char end, String name) + { + super(name); + this.start = start; + this.end = end; + } + + /** + * Returns the Unicode character block which a character belongs to. + * + * @param ch the character to look up + * @return the set it belongs to, or null if it is not in one + */ + public static UnicodeBlock of(char ch) + { + // Special case, since SPECIALS contains two ranges. + if (ch == '\uFEFF') + return SPECIALS; + // Simple binary search for the correct block. + int low = 0; + int hi = sets.length - 1; + while (low <= hi) + { + int mid = (low + hi) >> 1; + UnicodeBlock b = sets[mid]; + if (ch < b.start) + hi = mid - 1; + else if (ch > b.end) + low = mid + 1; + else + return b; + } + return null; + } +EOF + +my $seenSpecials = 0; +my $seenSurrogates = 0; +my $surrogateStart = 0; +my @names = (); +while () { + next if /^\#/; + my ($start, $end, $block) = split(/; /); + next unless defined $block; + chomp $block; + $block =~ s/ *$//; + if (! $seenSpecials and $block =~ /Specials/) { + # Special case SPECIALS, since it is two disjoint ranges + $seenSpecials = 1; + next; + } + if ($block =~ /Surrogates/) { + # Special case SURROGATES_AREA, since it one range, not three + # consecutive, in Java + $seenSurrogates++; + if ($seenSurrogates == 1) { + $surrogateStart = $start; + next; + } elsif ($seenSurrogates == 2) { + next; + } else { + $start = $surrogateStart; + $block = "Surrogates Area"; + } + } + # Special case the name of PRIVATE_USE_AREA. + $block =~ s/(Private Use)/$1 Area/; + + (my $name = $block) =~ tr/a-z -/A-Z__/; + push @names, $name; + my $since = (defined $additions{$name} + ? "\n * \@since $additions{$name}" : ""); + my $extra = ($block =~ /Specials/ ? "'\\uFEFF', " : ""); + print <

gnu-dev/or1k-gcc/libjava/scripts/unicode-blocks.pl Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property Index: gnu-dev/or1k-gcc/libjava/scripts/makemake.tcl =================================================================== --- gnu-dev/or1k-gcc/libjava/scripts/makemake.tcl (nonexistent) +++ gnu-dev/or1k-gcc/libjava/scripts/makemake.tcl (revision 762) @@ -0,0 +1,577 @@ +#!/usr/bin/tclsh + +# Helper to enforce array-ness. +proc makearray {name} { + upvar $name ary + set ary(_) 1 + unset ary(_) +} + +global is_verbose +set is_verbose 0 + +# Verbose printer. +proc verbose {text} { + global is_verbose + if {$is_verbose} { + puts stderr $text + } +} + +# This maps a name to its style: +# * bc objects in this package and all its sub-packages +# are to be compiled with the BC ABI. It is an error +# for sub-packages to also appear in the map. +# * bcheaders +# as bc, but generate header files and compile with CNI. +# * package +# objects in this package (and possibly sub-packages, +# if they do not appear in the map) will be compiled en masse +# from source into a single object, using the C++ ABI. +# * ordinary +# objects in this package (and possibly sub-packages +# if they do not appear in the map) will be compiled one at +# a time into separate .o files. +# * ignore +# objects in this package are not used. Note however that +# most ignored files are actually handled by listing them in +# 'standard.omit' +# * interpreter +# objects in this package (and possibly sub-packages, +# if they do not appear in the map) are only compiled if +# the interpreter is enabled. They are compiled as with the +# 'package' specifier. +# +# If a package does not appear in the map, the default is 'package'. +global package_map +set package_map(.) package + +# These are ignored in Classpath. +set package_map(gnu/test) ignore +set package_map(gnu/javax/swing/plaf/gtk) ignore +set package_map(gnu/gcj/tools/gc_analyze) ignore + +set package_map(gnu/java/awt/peer/swing) bc + +set package_map(gnu/xml/aelfred2) bc +set package_map(gnu/xml/dom) bc +set package_map(gnu/xml/libxmlj) bc +set package_map(gnu/xml/pipeline) bc +set package_map(gnu/xml/stream) bc +set package_map(gnu/xml/transform) bc +set package_map(gnu/xml/util) bc +set package_map(gnu/xml/validation) bc +set package_map(gnu/xml/xpath) bc +set package_map(javax/imageio) bc +set package_map(javax/xml) bc +set package_map(gnu/java/beans) bc +set package_map(gnu/java/awt/dnd/peer/gtk) bc +set package_map(gnu/java/util/prefs/gconf) bc +set package_map(gnu/java/awt/peer/gtk) bc +set package_map(gnu/java/awt/dnd/peer/gtk) bc +set package_map(gnu/java/awt/peer/qt) bc +set package_map(gnu/java/awt/peer/x) bc +set package_map(gnu/java/util/prefs/gconf) bc +set package_map(gnu/javax/sound/midi) bc +set package_map(gnu/javax/sound/sampled/gstreamer) ignore +set package_map(org/xml) bc +set package_map(org/w3c) bc +set package_map(org/relaxng) bc +set package_map(javax/rmi) bc +set package_map(org/omg/IOP) bc +set package_map(org/omg/PortableServer) bc +set package_map(org/omg/CosNaming) bc +set package_map(org/omg/CORBA_2_3) bc +set package_map(org/omg/Messaging) bc +set package_map(org/omg/stub) bc +set package_map(org/omg/CORBA) bc +set package_map(org/omg/PortableInterceptor) bc +set package_map(org/omg/DynamicAny) bc +set package_map(org/omg/SendingContext) bc +set package_map(org/omg/Dynamic) bc +set package_map(gnu/CORBA) bc +set package_map(gnu/javax/rmi) bc +set package_map(gnu/java/lang/management) bcheaders +set package_map(java/lang/management) bc +set package_map(gnu/classpath/management) bc +set package_map(gnu/javax/management) bc +set package_map(gnu/java/math) bc + +# parser/HTML_401F.class is really big, and there have been complaints +# about this package requiring too much memory to build. So, we +# compile it as separate objects. But, we're careful to compile the +# sub-packages as packages. +set package_map(gnu/javax/swing/text/html/parser) ordinary +set package_map(gnu/javax/swing/text/html/parser/models) package +set package_map(gnu/javax/swing/text/html/parser/support) package + +# More special cases. These end up in their own library. +# Note that if we BC-compile AWT we must update these as well. +set package_map(gnu/gcj/xlib) package +set package_map(gnu/awt/xlib) package + +# These packages should only be included if the interpreter is +# enabled. +set package_map(gnu/classpath/jdwp) interpreter +set package_map(gnu/classpath/jdwp/event) interpreter +set package_map(gnu/classpath/jdwp/event/filters) interpreter +set package_map(gnu/classpath/jdwp/exception) interpreter +set package_map(gnu/classpath/jdwp/id) interpreter +set package_map(gnu/classpath/jdwp/processor) interpreter +set package_map(gnu/classpath/jdwp/transport) interpreter +set package_map(gnu/classpath/jdwp/util) interpreter +set package_map(gnu/classpath/jdwp/value) interpreter +set package_map(gnu/gcj/jvmti) interpreter + +# Some BC ABI packages have classes which must not be compiled BC. +# This maps such packages to a grep expression for excluding such +# classes. +global exclusion_map +makearray exclusion_map +# set exclusion_map(java/awt) AWTPermission + +# This maps a package name to a list of corresponding .java file base +# names. The package name will either appear as a key in package_map, +# or it will be '.' for the default. +global name_map +makearray name_map + +# This maps a java file base name, like 'java/lang/Object.java', to +# the source directory in which it resides. We keep a layer of +# indirection here so that we can override sources in Classpath with +# our own sources. +global dir_map +makearray dir_map + +# An entry in this map means that all .properties files in the +# corresponding directory should be ignored. +global properties_map +makearray properties_map + +# logging.properties is installed and is editable. +set properties_map(java/util/logging) _ + +# We want to be able to load xerces if it is on the class path. So, +# we have to avoid compiling in the XML-related service files. +set properties_map(META-INF/services/javax.xml.parsers.DocumentBuilderFactory) _ +set properties_map(META-INF/services/javax.xml.parsers.SAXParserFactory) _ +set properties_map(META-INF/services/javax.xml.parsers.TransformerFactory) _ +set properties_map(META-INF/services/org.relaxng.datatype.DatatypeLibraryFactory) _ +set properties_map(META-INF/services/org.w3c.dom.DOMImplementationSourceList) _ +set properties_map(META-INF/services/org.xml.sax.driver) _ +set properties_map(META-INF/services/javax.sound.sampled.spi.AudioFileReader.in) ignore +set properties_map(META-INF/services/javax.sound.sampled.spi.MixerProvider) ignore +set properties_map(META-INF/services/javax.sound.sampled.spi.MixerProvider.in) ignore + +# List of all properties files. +set properties_files {} + +# List of all '@' files that we are going to compile. +set package_files {} + +# List of all '@' files that we are going to compile if the +# interpreter is enabled. +set interpreter_package_files {} + +# List of all header file variables. +set header_vars {} + +# List of all header file variables for interpreter packages. +set interpreter_header_vars {} + +# List of all BC object files. +set bc_objects {} + +# List of regexps for matching ignored files. +set ignore_rx_list {} + + +# Return true if a given file should be ignored. +# The argument is the path name including the package part. +proc ignore_file_p {file} { + global ignore_rx_list + foreach rx $ignore_rx_list { + if {[regexp -- $rx $file]} { + verbose "ignoring $file for $rx" + return 1 + } + } + return 0 +} + +# Read a '.omit' file and update the internal data structures. +proc read_omit_file {name} { + global ignore_rx_list + set fd [open $name r] + while {! [eof $fd]} { + set line [gets $fd] + + # Classpath's entries bogusly start with "../". + if {[string match ../* $line]} { + set line [string range $line 3 end] + } + + if {$line != ""} { + lappend ignore_rx_list $line + } + } + close $fd +} + +# Classify a single source file. +proc classify_source_file {basedir file} { + global package_map name_map dir_map + + if {[ignore_file_p $file]} { + return + } + + set seen [info exists dir_map($file)] + set dir_map($file) $basedir + set pkg $file + while {1} { + if {[info exists package_map($pkg)]} { + # If the entry is 'package', then set up a new entry for the + # file's package. + if {$package_map($pkg) == "package"} { + set pkg [file dirname $file] + set package_map($pkg) package + } + verbose "classify succeeded: $file -> $pkg" + if {! $seen} { + lappend name_map($pkg) $file + } + return + } + set pkg [file dirname $pkg] + } + error "can't happen" +} + +# Scan a directory and its subdirectories for .java source files or +# .properties files. Note that we keep basedir and subdir separate so +# we can properly update our global data structures. +proc scan_directory {basedir subdir} { + global dir_map properties_map properties_files + + set subdirs {} + set files {} + set here [pwd] + cd $basedir/$subdir + foreach file [lsort [glob -nocomplain *]] { + if {[string match *.java $file]} { + lappend files $subdir/$file + } elseif {[string match *.properties $file]} { + if {! [info exists properties_map($subdir)]} { + # We assume there aren't any overrides. + lappend properties_files $basedir/$subdir/$file + } + } elseif {[string match *.css $file]} { + # Special case for default.css needed by javax.swing.text.html. + lappend properties_files $basedir/$subdir/$file + } elseif {[file isdirectory $file]} { + lappend subdirs $subdir/$file + } elseif {$subdir == "META-INF/services"} { + # Service files are generally included as properties. + if {! [info exists properties_map($subdir/$file)]} { + lappend properties_files $basedir/$subdir/$file + } + } + } + cd $here + + # Recurse first, so that we don't create new packages too eagerly. + foreach dir $subdirs { + scan_directory $basedir $dir + } + + foreach file $files { + classify_source_file $basedir $file + } +} + +# Scan known packages beneath the base directory for .java source +# files. +proc scan_packages {basedir} { + foreach subdir {gnu java javax org sun com META-INF} { + if {[file exists $basedir/$subdir]} { + scan_directory $basedir $subdir + } + } +} + +# Emit a rule for a 'bc' package. +proc emit_bc_rule {package} { + global package_map exclusion_map bc_objects + + if {$package == "."} { + set pkgname ordinary + } else { + set pkgname $package + } + set varname [join [split $pkgname /] _]_source_files + set loname [join [split $pkgname /] -].lo + set tname [join [split $pkgname /] -].list + + puts "$loname: \$($varname)" + # Create a temporary list file and then compile it. This works + # around the libtool problem mentioned in PR 21058. classpath was + # built first, so the class files are to be found there. + set omit "" + if {[info exists exclusion_map($package)]} { + set omit "| grep -v $exclusion_map($package)" + } + puts "\t@find \$(srcdir)/classpath/lib/$package -name '*.class'${omit} > $tname" + puts -nonewline "\t\$(LTGCJCOMPILE) -fsource-filename=\$(here)/classpath/lib/classes " + if {$package_map($package) == "bc"} { + puts -nonewline "-fjni " + } + # Unless bc is disabled with --disable-libgcj-bc, $(LIBGCJ_BC_FLAGS) is: + # -findirect-dispatch -fno-indirect-classes + puts "\$(LIBGCJ_BC_FLAGS) -c -o $loname @$tname" + puts "\t@rm -f $tname" + puts "" + + # We skip these because they are built into their own libraries and + # are handled specially in Makefile.am. + if {$loname != "gnu-java-awt-peer-qt.lo" && $loname != "gnu-java-awt-peer-x.lo"} { + lappend bc_objects $loname + } +} + +# Emit a rule for a 'package' package. +proc emit_package_rule_to_list {package package_files_list} { + global package_map exclusion_map $package_files_list + + if {$package == "."} { + set pkgname ordinary + } else { + set pkgname $package + } + set varname [join [split $pkgname /] _]_source_files + set base $pkgname + set lname $base.list + set dname $base.deps + + if {$pkgname == "java/lang"} { + # Object and Class are special cases due to an apparent compiler + # bug. Process is a special case because we don't build all + # concrete implementations of Process on all platforms. + set omit "| tr ' ' '\\012' | fgrep -v Object.class | fgrep -v Class.class | egrep -v '$Ecos\|Posix\|Win32$Process' " + } else { + set omit "" + } + + # A rule to make the phony file we are going to compile. + puts "$lname: \$($varname)" + puts "\t@\$(mkinstalldirs) \$(dir \$@)" + puts "\techo \$(srcdir)/classpath/lib/$package/*.class $omit> $lname" + puts "" + puts "-include $dname" + puts "" + puts "" + + if {$pkgname != "gnu/gcj/xlib" && $pkgname != "gnu/awt/xlib" + && $pkgname != "gnu/gcj/tools/gcj_dbtool"} { + lappend $package_files_list $lname + } +} + +proc emit_package_rule {package} { + global package_files + emit_package_rule_to_list $package package_files +} + +proc emit_interpreter_rule {package} { + global interpreter_package_files + emit_package_rule_to_list $package interpreter_package_files +} + +# Emit a rule to build a package full of 'ordinary' files, that is, +# one .o for each .java. +proc emit_ordinary_rule {package} { + global name_map package_files + + foreach file $name_map($package) { + # Strip off the '.java'. + set root [file rootname $file] + + # Look for all included .class files. Assumes that we don't have + # multiple top-level classes in a .java file. + set lname $root.list + set dname $root.deps + + puts "$lname: classpath/$file" + puts "\t@\$(mkinstalldirs) \$(dir \$@)" + puts "\techo \$(srcdir)/classpath/lib/${root}*.class> $lname" + puts "" + puts "-include $dname" + puts "" + puts "" + + lappend package_files $lname + } +} + +# Emit a package-like rule for a platform-specific Process +# implementation. +proc emit_process_package_rule {platform} { + set base "java/process-$platform" + set lname $base.list + set dname $base.deps + + puts "$lname: java/lang/${platform}Process.java" + puts "\t@\$(mkinstalldirs) \$(dir \$@)" + puts "\techo \$(srcdir)/classpath/lib/java/lang/${platform}Process*.class > $lname" + puts "" + puts "-include $dname" + puts "" + puts "" +} + +# Emit a source file variable for a package, and corresponding header +# file variable, if needed. +proc emit_source_var {package} { + global package_map name_map dir_map header_vars interpreter_header_vars + + if {$package == "."} { + set pkgname ordinary + } else { + set pkgname $package + } + set uname [join [split $pkgname /] _] + set varname ${uname}_source_files + puts -nonewline "$varname =" + + makearray dirs + foreach base [lsort $name_map($package)] { + # Terminate previous line. + puts " \\" + # Having files start with './' is ugly and confuses the automake + # "dirstamp" code; see automake PR 461. + set ndir $dir_map($base)/ + if {$ndir == "./"} { + set ndir "" + } + puts -nonewline "${ndir}${base}" + set dirs($dir_map($base)) 1 + } + puts "" + puts "" + + if {$package_map($package) != "bc"} { + # Ugly code to build up the appropriate patsubst. + set result "\$(patsubst %.java,%.h,\$($varname))" + # We use -decreasing so that classpath/external will be stripped + # before classpath. + foreach dir [lsort -decreasing [array names dirs]] { + if {$dir != "."} { + set result "\$(patsubst $dir/%,%,$result)" + } + } + + if {$package == "." || $package == "java/lang"} { + # Ugly hack. + set result "\$(filter-out java/lang/Object.h java/lang/Class.h,$result)" + } + + puts "${uname}_header_files = $result" + puts "" + if {$pkgname != "gnu/gcj/xlib" && $pkgname != "gnu/awt/xlib"} { + if {$package_map($package) == "interpreter"} { + lappend interpreter_header_vars "${uname}_header_files" + } else { + lappend header_vars "${uname}_header_files" + } + } + } +} + +# Pretty-print a Makefile variable. +proc pp_var {name valueList {pre ""} {post ""}} { + puts "" + puts -nonewline "$name =" + foreach val $valueList { + puts " \\" + puts -nonewline " ${pre}${val}${post}" + } + puts "" +} + +global argv +if {[llength $argv] > 0 && [lindex $argv 0] == "-verbose"} { + set is_verbose 1 +} + +# Read the proper .omit files. +read_omit_file standard.omit.in +read_omit_file classpath/lib/standard.omit.in + +# Scan classpath first. +scan_packages classpath +scan_packages classpath/external/sax +scan_packages classpath/external/w3c_dom +scan_packages classpath/external/relaxngDatatype +scan_packages classpath/external/jsr166 +# Resource files. +scan_packages classpath/resource +# Now scan our own files; this will correctly override decisions made +# when scanning classpath. +scan_packages . +# Files created by the build. +classify_source_file classpath gnu/java/locale/LocaleData.java +classify_source_file classpath gnu/java/security/Configuration.java +classify_source_file classpath gnu/classpath/Configuration.java + +puts "## This file was automatically generated by scripts/makemake.tcl" +puts "## Do not edit!" +puts "" + +foreach package [lsort [array names package_map]] { + if {$package_map($package) == "ignore"} { + continue + } + if {! [info exists name_map($package)]} { + continue + } + + emit_source_var $package + + if {$package_map($package) == "bc"} { + emit_bc_rule $package + } elseif {$package_map($package) == "bcheaders"} { + emit_bc_rule $package + } elseif {$package_map($package) == "ordinary"} { + emit_ordinary_rule $package + } elseif {$package_map($package) == "package"} { + emit_package_rule $package + } elseif {$package_map($package) == "interpreter"} { + emit_interpreter_rule $package + } else { + error "unrecognized type: $package_map($package)" + } +} + +emit_process_package_rule Ecos +emit_process_package_rule Win32 +emit_process_package_rule Posix + +puts "if INTERPRETER" +pp_var interpreter_packages_source_files $interpreter_package_files +pp_var interpreter_header_files $interpreter_header_vars "\$(" ")" +puts "" +puts "else" +puts "" +puts "interpreter_packages_source_files=" +puts "" +puts "interpreter_header_files=" +puts "" +puts "endif" + +lappend package_files {$(interpreter_packages_source_files)} +lappend header_vars interpreter_header_files + +pp_var all_packages_source_files $package_files +pp_var ordinary_header_files $header_vars "\$(" ")" +pp_var bc_objects $bc_objects +pp_var property_files $properties_files

gnu-dev/or1k-gcc/libjava/scripts/makemake.tcl Property changes : Added: svn:executable ## -0,0 +1 ## +* \ No newline at end of property

Browse

Tools

Subversion Repositories openrisc

Compare Revisions

Rev 761 → Rev 762