URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/branches/oc/gdb-5.0/readline/support
- from Rev 106 to Rev 1765
- ↔ Reverse comparison
Rev 106 → Rev 1765
/install.sh
0,0 → 1,235
#!/bin/sh |
# |
# install - install a program, script, or datafile |
# This comes from X11R5. |
# |
# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $ |
# |
# This script is compatible with the BSD install script, but was written |
# from scratch. |
# |
|
# set DOITPROG to echo to test this script |
|
# Don't use :- since 4.3BSD and earlier shells don't like it. |
doit="${DOITPROG-}" |
|
|
# put in absolute paths if you don't have them in your path; or use env. vars. |
|
mvprog="${MVPROG-mv}" |
cpprog="${CPPROG-cp}" |
chmodprog="${CHMODPROG-chmod}" |
chownprog="${CHOWNPROG-chown}" |
chgrpprog="${CHGRPPROG-chgrp}" |
stripprog="${STRIPPROG-strip}" |
rmprog="${RMPROG-rm}" |
mkdirprog="${MKDIRPROG-mkdir}" |
|
tranformbasename="" |
transform_arg="" |
instcmd="$mvprog" |
chmodcmd="$chmodprog 0755" |
chowncmd="" |
chgrpcmd="" |
stripcmd="" |
rmcmd="$rmprog -f" |
mvcmd="$mvprog" |
src="" |
dst="" |
dir_arg="" |
|
while [ x"$1" != x ]; do |
case $1 in |
-c) instcmd="$cpprog" |
shift |
continue;; |
|
-d) dir_arg=true |
shift |
continue;; |
|
-m) chmodcmd="$chmodprog $2" |
shift |
shift |
continue;; |
|
-o) chowncmd="$chownprog $2" |
shift |
shift |
continue;; |
|
-g) chgrpcmd="$chgrpprog $2" |
shift |
shift |
continue;; |
|
-s) stripcmd="$stripprog" |
shift |
continue;; |
|
-t=*) transformarg=`echo $1 | sed 's/-t=//'` |
shift |
continue;; |
|
-b=*) transformbasename=`echo $1 | sed 's/-b=//'` |
shift |
continue;; |
|
*) if [ x"$src" = x ] |
then |
src=$1 |
else |
# this colon is to work around a 386BSD /bin/sh bug |
: |
dst=$1 |
fi |
shift |
continue;; |
esac |
done |
|
if [ x"$src" = x ] |
then |
echo "install: no input file specified" |
exit 1 |
else |
true |
fi |
|
if [ x"$dir_arg" != x ]; then |
dst=$src |
src="" |
|
if [ -d $dst ]; then |
instcmd=: |
else |
instcmd=mkdir |
fi |
else |
|
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command |
# might cause directories to be created, which would be especially bad |
# if $src (and thus $dsttmp) contains '*'. |
|
if [ -f $src -o -d $src ] |
then |
true |
else |
echo "install: $src does not exist" |
exit 1 |
fi |
|
if [ x"$dst" = x ] |
then |
echo "install: no destination specified" |
exit 1 |
else |
true |
fi |
|
# If destination is a directory, append the input filename; if your system |
# does not like double slashes in filenames, you may need to add some logic |
|
if [ -d $dst ] |
then |
dst="$dst"/`basename $src` |
else |
true |
fi |
fi |
|
## this sed command emulates the dirname command |
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` |
|
# Make sure that the destination directory exists. |
# this part is taken from Noah Friedman's mkinstalldirs script |
|
# Skip lots of stat calls in the usual case. |
if [ ! -d "$dstdir" ]; then |
defaultIFS=' |
' |
IFS="${IFS-${defaultIFS}}" |
|
oIFS="${IFS}" |
# Some sh's can't handle IFS=/ for some reason. |
IFS='%' |
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` |
IFS="${oIFS}" |
|
pathcomp='' |
|
while [ $# -ne 0 ] ; do |
pathcomp="${pathcomp}${1}" |
shift |
|
if [ ! -d "${pathcomp}" ] ; |
then |
$mkdirprog "${pathcomp}" |
else |
true |
fi |
|
pathcomp="${pathcomp}/" |
done |
fi |
|
if [ x"$dir_arg" != x ] |
then |
$doit $instcmd $dst && |
|
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && |
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && |
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && |
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi |
else |
|
# If we're going to rename the final executable, determine the name now. |
|
if [ x"$transformarg" = x ] |
then |
dstfile=`basename $dst` |
else |
dstfile=`basename $dst $transformbasename | |
sed $transformarg`$transformbasename |
fi |
|
# don't allow the sed command to completely eliminate the filename |
|
if [ x"$dstfile" = x ] |
then |
dstfile=`basename $dst` |
else |
true |
fi |
|
# Make a temp file name in the proper directory. |
|
dsttmp=$dstdir/#inst.$$# |
|
# Move or copy the file name to the temp name |
|
$doit $instcmd $src $dsttmp && |
|
trap "rm -f ${dsttmp}" 0 && |
|
# and set any options; do chmod last to preserve setuid bits |
|
# If any of these fail, we abort the whole thing. If we want to |
# ignore errors from any of these, just make sure not to ignore |
# errors from the above "$doit $instcmd $src $dsttmp" command. |
|
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && |
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && |
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && |
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && |
|
# Now rename the file to the real destination. |
|
$doit $rmcmd -f $dstdir/$dstfile && |
$doit $mvcmd $dsttmp $dstdir/$dstfile |
|
fi && |
|
|
exit 0 |
install.sh
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: shlib-install
===================================================================
--- shlib-install (nonexistent)
+++ shlib-install (revision 1765)
@@ -0,0 +1,105 @@
+#! /bin/sh
+#
+# shlib-install - install a shared library and do any necessary host-specific
+# post-installation configuration (like ldconfig)
+#
+# usage: shlib-install [-D] -O host_os -d installation-dir -i install-prog [-U] library
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+#
+# defaults
+#
+INSTALLDIR=/usr/local/lib
+LDCONFIG=ldconfig
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-D] -O host_os -d installation-dir -i install-prog [-U] library"
+
+# process options
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -O) shift; host_os="$1"; shift ;;
+ -d) shift; INSTALLDIR="$1"; shift ;;
+ -i) shift; INSTALLPROG="$1" ; shift ;;
+ -D) echo=echo ; shift ;;
+ -U) uninstall=true ; shift ;;
+ -*) echo "$USAGE" >&2 ; exit 2;;
+ *) break ;;
+ esac
+done
+
+# set install target name
+LIBNAME="$1"
+
+if [ -z "$LIBNAME" ]; then
+ echo "$USAGE" >&2
+ exit 2
+fi
+
+OLDSUFF=old
+MV=mv
+RM="rm -f"
+LN="ln -s"
+
+# pre-install
+
+if [ -z "$uninstall" ]; then
+ ${echo} $RM ${INSTALLDIR}/${LIBNAME}.${OLDSUFF}
+ if [ -f "$INSTALLDIR/$LIBNAME" ]; then
+ ${echo} $MV $INSTALLDIR/$LIBNAME ${INSTALLDIR}/${LIBNAME}${OLDSUFF}
+ fi
+fi
+
+# install/uninstall
+
+if [ -z "$uninstall" ] ; then
+ ${echo} eval ${INSTALLPROG} $LIBNAME ${INSTALLDIR}/${LIBNAME}
+else
+ ${echo} ${RM} ${INSTALLDIR}/${LIBNAME}
+fi
+
+# post-install/uninstall
+
+case "$LIBNAME" in
+*.*.[0-9].[0-9]) # libname.so.M.N
+ LINK2=`echo $LIBNAME | sed 's:\(.*\..*\.[0-9]\)\.[0-9]:\1:'` # libname.so.M
+ LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]\.[0-9]:\1:'` # libname.so
+ ;;
+*.*.[0-9]) # libname.so.M
+ LINK1=`echo $LIBNAME | sed 's:\(.*\..*\)\.[0-9]:\1:'` # libname.so
+ ;;
+esac
+
+#
+# Create symlinks to the installed library. This section is incomplete.
+#
+case "$host_os" in
+*linux*|bsdi4*)
+ # libname.so.M -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK2
+ if [ -z "$uninstall" ]; then
+ ${echo} ln -s $INSTALLDIR/$LIBNAME ${INSTALLDIR}/$LINK2
+ fi
+
+ # libname.so -> libname.so.M.N
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ ${echo} ln -s $INSTALLDIR/$LIBNAME ${INSTALLDIR}/$LINK1
+ fi
+ ;;
+
+solaris2*|aix4.[2-9]*|hpux1*)
+ # libname.so -> libname.so.M
+ ${echo} ${RM} ${INSTALLDIR}/$LINK1
+ if [ -z "$uninstall" ]; then
+ ${echo} ln -s $INSTALLDIR/$LIBNAME ${INSTALLDIR}/$LINK1
+ fi
+ ;;
+
+*) ;;
+esac
+
+exit 0
shlib-install
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: shobj-conf
===================================================================
--- shobj-conf (nonexistent)
+++ shobj-conf (revision 1765)
@@ -0,0 +1,347 @@
+#! /bin/sh
+#
+# shobj-conf -- output a series of variable assignments to be substituted
+# into a Makefile by configure which specify system-dependent
+# information for creating shared objects that may be loaded
+# into bash with `enable -f'
+#
+# usage: shobj-conf [-C compiler] -c host_cpu -o host_os -v host_vendor
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+#
+# defaults
+#
+SHOBJ_STATUS=supported
+SHLIB_STATUS=supported
+
+SHOBJ_CC=cc
+SHOBJ_CFLAGS=
+SHOBJ_LD=
+SHOBJ_LDFLAGS=
+SHOBJ_XLDFLAGS=
+SHOBJ_LIBS=
+
+SHLIB_XLDFLAGS=
+SHLIB_LIBS=
+SHLIB_LIBSUFF='so'
+
+SHLIB_LIBVERSION='$(SHLIB_LIBSUFF)'
+
+PROGNAME=`basename $0`
+USAGE="$PROGNAME [-C compiler] -c host_cpu -o host_os -v host_vendor"
+
+while [ $# -gt 0 ]; do
+ case "$1" in
+ -C) shift; SHOBJ_CC="$1"; shift ;;
+ -c) shift; host_cpu="$1"; shift ;;
+ -o) shift; host_os="$1"; shift ;;
+ -v) shift; host_vendor="$1"; shift ;;
+ *) echo "$USAGE" >&2 ; exit 2;;
+ esac
+done
+
+case "${host_os}-${SHOBJ_CC}" in
+sunos4*-gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD=/usr/bin/ld
+ SHOBJ_LDFLAGS='-assert pure-text'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+sunos4*)
+ SHOBJ_CFLAGS=-pic
+ SHOBJ_LD=/usr/bin/ld
+ SHOBJ_LDFLAGS='-assert pure-text'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+sunos5*-gcc*|solaris2*-gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-i'
+
+ SHLIB_XLDFLAGS='-R $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sunos5*|solaris2*)
+ SHOBJ_CFLAGS='-K pic'
+ SHOBJ_LD=/usr/ccs/bin/ld
+ SHOBJ_LDFLAGS='-G -dy -z text -i -h $@'
+
+ SHLIB_XLDFLAGS='-R $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+freebsd2* | netbsd* | openbsd*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-x -Bshareable'
+
+ SHLIB_XLDFLAGS='-R$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+freebsd3*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_XLDFLAGS='-R$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+linux*)
+ SHOBJ_CFLAGS=-fPIC
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+bsdi2*)
+ SHOBJ_CC=shlicc2
+ SHOBJ_CFLAGS=
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS=-r
+ SHOBJ_LIBS=-lc_s.2.1.0
+
+ # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+ # the ass -- they require changing {/usr/lib,etc}/shlib.map on
+ # each system, and the library creation process is byzantine
+ SHLIB_STATUS=unsupported
+ ;;
+
+bsdi3*)
+ SHOBJ_CC=shlicc2
+ SHOBJ_CFLAGS=
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS=-r
+ SHOBJ_LIBS=-lc_s.3.0.0
+
+ # BSD/OS 2.x and 3.x `shared libraries' are too much of a pain in
+ # the ass -- they require changing {/usr/lib,etc}/shlib.map on
+ # each system, and the library creation process is byzantine
+ SHLIB_STATUS=unsupported
+ ;;
+
+bsdi4*)
+ # BSD/OS 4.x now supports ELF and SunOS-style dynamically-linked
+ # shared libraries. gcc 2.x is the standard compiler, and the
+ # `normal' gcc options should work as they do in Linux.
+
+ SHOBJ_CFLAGS=-fPIC
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)$(SHLIB_MINOR)'
+ ;;
+
+osf*)
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-shared -soname $@ -expect_unresolved "*"'
+
+ SHLIB_XLDFLAGS='-rpath $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+aix4.[2-9]*-gcc*) # lightly tested by jik@cisco.com
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='ld'
+ SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+ SHOBJ_XLDFLAGS='-G'
+
+ SHLIB_XLDFLAGS='-bM:SRE'
+ SHLIB_LIBS='-lcurses -lc'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+aix4.[2-9]*)
+ SHOBJ_CFLAGS=-K
+ SHOBJ_LD='ld'
+ SHOBJ_LDFLAGS='-bdynamic -bnoentry -bexpall'
+ SHOBJ_XLDFLAGS='-G'
+
+ SHLIB_XLDFLAGS='-bM:SRE'
+ SHLIB_LIBS='-lcurses -lc'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+#
+# THE FOLLOWING ARE UNTESTED -- and some may not support the dlopen interface
+#
+irix[56]*-gcc*)
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-soname,$@'
+
+ SHLIB_XLDFLAGS='-Wl,-rpath,$(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+irix[56]*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-call_shared -hidden_symbol -no_unresolved -soname $@'
+
+ SHLIB_XLDFLAGS='-rpath $(libdir)'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux9*-gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
+
+ SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux9*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+hpux10*-gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s'
+
+ SHLIB_XLDFLAGS='-Wl,+h,$@ -Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux10*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+hpux11*-gcc*)
+ # must use gcc; the bundled cc cannot compile PIC code
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+# SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,-B,symbolic -Wl,+s -Wl,+std -Wl,+h,$@'
+ SHOBJ_LDFLAGS='-shared -Wl,-b -Wl,+s -Wl,+h,$@'
+
+ SHLIB_XLDFLAGS='-Wl,+b,$(libdir)'
+ SHLIB_LIBSUFF='sl'
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+hpux11*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+sysv4*-gcc*)
+ SHOBJ_CFLAGS=-shared
+ SHOBJ_LDFLAGS='-shared -h $@'
+ SHOBJ_LD='${CC}'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv4*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-dy -z text -G -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sco3.2v5*-gcc*)
+ SHOBJ_CFLAGS='-fpic' # DEFAULTS TO ELF
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sco3.2v5*)
+ SHOBJ_CFLAGS='-K pic -b elf'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -b elf -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5uw7*-gcc*)
+ SHOBJ_CFLAGS='-fpic'
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+sysv5uw7*)
+ SHOBJ_CFLAGS='-K PIC'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -z text -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+dgux*-gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+dgux*)
+ SHOBJ_CFLAGS='-K pic'
+ SHOBJ_LD=ld
+ SHOBJ_LDFLAGS='-G -dy -h $@'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+msdosdjgpp*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+#
+# Rely on correct gcc configuration for everything else
+#
+*-gcc*)
+ SHOBJ_CFLAGS=-fpic
+ SHOBJ_LD='${CC}'
+ SHOBJ_LDFLAGS='-shared'
+
+ SHLIB_LIBVERSION='$(SHLIB_LIBSUFF).$(SHLIB_MAJOR)'
+ ;;
+
+*)
+ SHOBJ_STATUS=unsupported
+ SHLIB_STATUS=unsupported
+ ;;
+
+esac
+
+echo SHOBJ_CC=\'"$SHOBJ_CC"\'
+echo SHOBJ_CFLAGS=\'"$SHOBJ_CFLAGS"\'
+echo SHOBJ_LD=\'"$SHOBJ_LD"\'
+echo SHOBJ_LDFLAGS=\'"$SHOBJ_LDFLAGS"\'
+echo SHOBJ_XLDFLAGS=\'"$SHOBJ_XLDFLAGS"\'
+echo SHOBJ_LIBS=\'"$SHOBJ_LIBS"\'
+
+echo SHLIB_XLDFLAGS=\'"$SHLIB_XLDFLAGS"\'
+echo SHLIB_LIBS=\'"$SHLIB_LIBS"\'
+echo SHLIB_LIBSUFF=\'"$SHLIB_LIBSUFF"\'
+echo SHLIB_LIBVERSION=\'"$SHLIB_LIBVERSION"\'
+
+echo SHOBJ_STATUS=\'"$SHOBJ_STATUS"\'
+echo SHLIB_STATUS=\'"$SHLIB_STATUS"\'
+
+exit 0
shobj-conf
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: mkdirs
===================================================================
--- mkdirs (nonexistent)
+++ mkdirs (revision 1765)
@@ -0,0 +1,32 @@
+#! /bin/sh
+#
+# mkdirs - a work-alike for `mkdir -p'
+#
+# Chet Ramey
+# chet@po.cwru.edu
+
+for dir
+do
+
+ test -d "$dir" && continue
+
+ tomake=$dir
+ while test -n "$dir" ; do
+ # dir=${dir%/*}
+ # dir=`expr "$dir" ':' '\(/.*\)/[^/]*'`
+ if dir=`expr "$dir" ':' '\(.*\)/[^/]*'`; then
+ tomake="$dir $tomake"
+ else
+ dir=
+ fi
+ done
+
+ for d in $tomake
+ do
+ test -d "$d" && continue
+ echo mkdir "$d"
+ mkdir "$d"
+ done
+done
+
+exit 0
mkdirs
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: config.guess
===================================================================
--- config.guess (nonexistent)
+++ config.guess (revision 1765)
@@ -0,0 +1,1150 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Written by Per Bothner .
+# The master version of this file is at the FSF in /home/gd/gnu/lib.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit system type (host/target name).
+#
+# Only a few systems have been added to this list; please add others
+# (but try to keep the structure clean).
+#
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 8/24/94.)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+elif (test -f /usr/5bin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/usr/5bin
+fi
+
+UNAME=`(uname) 2>/dev/null` || UNAME=unknown
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+RELEASE=`expr "$UNAME_RELEASE" : '[^0-9]*\([0-9]*\)'` # 4
+case "$RELEASE" in
+"") RELEASE=0 ;;
+*) RELEASE=`expr "$RELEASE" + 0` ;;
+esac
+REL_LEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.\([0-9]*\)'` # 1
+REL_SUBLEVEL=`expr "$UNAME_RELEASE" : '[^0-9]*[0-9]*.[0-9]*.\([0-9]*\)'` # 2
+
+trap 'rm -f dummy.c dummy.o dummy; exit 1' 1 2 15
+
+# Some versions of i386 SVR4.2 make `uname' equivalent to `uname -n', which
+# is contrary to all other versions of uname
+if [ -n "$UNAME" ] && [ "$UNAME_S" != "$UNAME" ] && [ "$UNAME_S" = UNIX_SV ]; then
+ UNAME=UNIX_SV
+fi
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ # Begin cases added for Bash
+ alpha:NetBSD:*:*)
+ echo alpha-dec-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ alpha:OpenBSD:*:*)
+ echo alpha-dec-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:NetBSD:*:*)
+ echo ${UNAME_MACHINE}-pc-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i?86:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-pc-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i?86:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-pc-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ sparc:NetBSD:*:*)
+ echo sparc-unknown-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sparc:OpenBSD:*:*)
+ echo sparc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ vax:NetBSD:*:*)
+ echo vax-dec-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ vax:OpenBSD:*:*)
+ echo vax-dec-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:machten:*:*)
+ echo mac68k-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ concurrent*:*:*:*)
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo concurrent-concurrent-sysv3
+ else
+ echo concurrent-concurrent-bsd
+ fi
+ exit 0 ;;
+ ppc*:SunOS:5.*:*)
+ echo ppc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sparc:UNIX_SV:4.*:*)
+ echo sparc-unknown-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ mips:UNIX_SV:4.*:*)
+ echo mips-mips-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ mips:OSF*1:*:*)
+ echo mips-mips-osf1
+ exit 0 ;;
+ mips:4.4BSD:*:*)
+ echo mips-mips-bsd4.4
+ exit 0 ;;
+ MIServer-S:SMP_DC.OSx:*:dcosx)
+ echo mips-pyramid-sysv4
+ exit 0 ;;
+ news*:NEWS*:*:*)
+ echo mips-sony-newsos${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:NEXTSTEP:*:*)
+ echo i386-next-nextstep${RELEASE}
+ exit 0 ;;
+ *680?0:NEXTSTEP:*:*)
+ echo m68k-next-nextstep${RELEASE}
+ exit 0 ;;
+ *370:AIX:*:*)
+ echo ibm370-ibm-aix
+ exit 0 ;;
+ ksr1:OSF*1:*:*)
+ echo ksr1-ksr-osf1
+ exit 0 ;;
+ esa:OSF*1:*:* | ESA:OSF*:*:*)
+ echo esa-ibm-osf1
+ exit 0 ;;
+ DNP*:DNIX:*:*)
+ echo m68k-dnix-sysv
+ exit 0 ;;
+ *3b2*:*:*:*)
+ echo we32k-att-sysv3
+ exit 0 ;;
+ *:QNX:*:42*)
+ echo i386-qssl-qnx`echo ${UNAME_VERSION}`
+ exit 0 ;;
+ BeBox:BeOS:*:*)
+ echo powerpc-be-beos
+ exit 0 ;;
+ BeMac:BeOS:*:*)
+ echo powerpc-apple-beos
+ exit 0 ;;
+ BePC:BeOS:*:*)
+ echo i586-pc-beos
+ exit 0 ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit 0 ;;
+ # end cases added for Bash
+ alpha:OSF1:*:*)
+ if test $UNAME_RELEASE = "V4.0"; then
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ fi
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ cat <dummy.s
+ .globl main
+ .ent main
+main:
+ .frame \$30,0,\$26,0
+ .prologue 0
+ .long 0x47e03d80 # implver $0
+ lda \$2,259
+ .long 0x47e20c21 # amask $2,$1
+ srl \$1,8,\$2
+ sll \$2,2,\$2
+ sll \$0,3,\$0
+ addl \$1,\$0,\$0
+ addl \$2,\$0,\$0
+ ret \$31,(\$26),1
+ .end main
+EOF
+ ${CC-cc} dummy.s -o dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./dummy
+ case "$?" in
+ 7)
+ UNAME_MACHINE="alpha"
+ ;;
+ 15)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 14)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 10)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 16)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ esac
+ fi
+ rm -f dummy.s dummy
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr [[A-Z]] [[a-z]]`
+ exit 0 ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit 0 ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-cbm-sysv4
+ exit 0;;
+ amiga:NetBSD:*:*)
+ echo m68k-cbm-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-cbm-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit 0 ;;
+ arc64:OpenBSD:*:*)
+ echo mips64el-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hkmips:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ pmax:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ wgrisc:OpenBSD:*:*)
+ echo mipsel-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit 0;;
+ arm32:NetBSD:*:*)
+ echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ SR2?01:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit 0;;
+ Pyramid*:OSx*:*:*|MIS*:OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit 0 ;;
+ NILE:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit 0 ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ i86pc:SunOS:5.*:*)
+ echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit 0 ;;
+ sun3*:SunOS:*:*|sun:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit 0 ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:NetBSD:*:*)
+ echo m68k-atari-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ atari*:OpenBSD:*:*)
+ echo m68k-atari-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:NetBSD:*:*)
+ echo m68k-sun-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3*:OpenBSD:*:*)
+ echo m68k-sun-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:NetBSD:*:*)
+ echo m68k-apple-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-apple-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ Power?Macintosh:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-unknown-rhapsody${UNAME_RELEASE}
+ exit 0 ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit 0 ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit 0 ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit 0 ;;
+ 2020:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit 0 ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ sed 's/^ //' << EOF >dummy.c
+ int main (argc, argv) int argc; char **argv; {
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ ${CC-cc} dummy.c -o dummy \
+ && ./dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
+ && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit 0 ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit 0 ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit 0 ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit 0 ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 -o $UNAME_PROCESSOR = mc88110 ] ; then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx \
+ -o ${TARGET_BINARY_INTERFACE}x = x ] ; then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit 0 ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit 0 ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit 0 ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit 0 ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit 0 ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i?86:AIX:*:*)
+ echo i386-ibm-aix
+ exit 0 ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ sed 's/^ //' << EOF >dummy.c
+ #include
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ echo rs6000-ibm-aix3.2.5
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit 0 ;;
+ *:AIX:*:4)
+ if /usr/sbin/lsattr -EHl proc0 | grep POWER >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ elif grep bos410 /usr/include/stdio.h >/dev/null 2>&1; then
+ IBM_REV=4.1
+ elif grep bos411 /usr/include/stdio.h >/dev/null 2>&1; then
+ IBM_REV=4.1.1
+ else
+ IBM_REV=4.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit 0 ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit 0 ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit 0 ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit 0 ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit 0 ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit 0 ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit 0 ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit 0 ;;
+ 9000/[34678]??:HP-UX:*:*)
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/78? | 9000/80[24] | 9000/8[67]1 | 9000/8[78]9 | 9000/893 )
+ HP_ARCH=hppa2.0 ;;
+ 9000/7?? | 9000/8?[13679] | 9000/892 )
+ HP_ARCH=hppa1.1 ;;
+ 9000/[68]?? ) HP_ARCH=hppa1.0 ;;
+ esac
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit 0 ;;
+ 3050*:HI-UX:*:*)
+ sed 's/^ //' << EOF >dummy.c
+ #include
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ ${CC-cc} dummy.c -o dummy && ./dummy && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ echo unknown-hitachi-hiuxwe2
+ exit 0 ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit 0 ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit 0 ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit 0 ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit 0 ;;
+ i?86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-pc-osf1mk
+ else
+ echo ${UNAME_MACHINE}-pc-osf1
+ fi
+ exit 0 ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit 0 ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ CRAY*X-MP:*:*:*)
+ echo xmp-cray-unicos
+ exit 0 ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/
+ exit 0 ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE}
+ exit 0 ;;
+ CRAY-2:*:*:*)
+ echo cray2-cray-unicos
+ exit 0 ;;
+ F300:UNIX_System_V:*:*)
+ FUJITSU_SYS=`uname -p | tr [A-Z] [a-z] | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit 0 ;;
+ F301:UNIX_System_V:*:*)
+ echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'`
+ exit 0 ;;
+ hp3[0-9][05]:NetBSD:*:*)
+ echo m68k-hp-netbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp3[0-9][05]:OpenBSD:*:*)
+ echo m68k-hp-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:BSD/386:*:* | *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit 0 ;;
+ *:FreeBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit 0 ;;
+ *:NetBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ exit 0 ;;
+ i*:CYGWIN*:*)
+ echo i386-pc-cygwin32
+ exit 0 ;;
+ i*:MINGW*:*)
+ echo i386-pc-mingw32
+ exit 0 ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin32
+ exit 0 ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit 0 ;;
+ *:GNU:*:*)
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit 0 ;;
+ *:Linux:*:*)
+ # The BFD linker knows what the default object file format is, so
+ # first see if it will tell us.
+ ld_help_string=`ld --help 2>&1`
+ ld_supported_emulations=`echo $ld_help_string \
+ | sed -ne '/supported emulations:/!d
+ s/[ ][ ]*/ /g
+ s/.*supported emulations: *//
+ s/ .*//
+ p'`
+ case "$ld_supported_emulations" in
+ i?86linux) echo "${UNAME_MACHINE}-pc-linux-gnuaout" ; exit 0 ;;
+ i?86coff) echo "${UNAME_MACHINE}-pc-linux-gnucoff" ; exit 0 ;;
+ sparclinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+ m68klinux) echo "${UNAME_MACHINE}-unknown-linux-gnuaout" ; exit 0 ;;
+ elf32ppc) echo "powerpc-unknown-linux-gnu" ; exit 0 ;;
+ esac
+
+ if test "${UNAME_MACHINE}" = "alpha" ; then
+ sed 's/^ //' <dummy.s
+ .globl main
+ .ent main
+ main:
+ .frame \$30,0,\$26,0
+ .prologue 0
+ .long 0x47e03d80 # implver $0
+ lda \$2,259
+ .long 0x47e20c21 # amask $2,$1
+ srl \$1,8,\$2
+ sll \$2,2,\$2
+ sll \$0,3,\$0
+ addl \$1,\$0,\$0
+ addl \$2,\$0,\$0
+ ret \$31,(\$26),1
+ .end main
+EOF
+ LIBC=""
+ ${CC-cc} dummy.s -o dummy 2>/dev/null
+ if test "$?" = 0 ; then
+ ./dummy
+ case "$?" in
+ 7)
+ UNAME_MACHINE="alpha"
+ ;;
+ 15)
+ UNAME_MACHINE="alphaev5"
+ ;;
+ 14)
+ UNAME_MACHINE="alphaev56"
+ ;;
+ 10)
+ UNAME_MACHINE="alphapca56"
+ ;;
+ 16)
+ UNAME_MACHINE="alphaev6"
+ ;;
+ esac
+
+ objdump --private-headers dummy | \
+ grep ld.so.1 > /dev/null
+ if test "$?" = 0 ; then
+ LIBC="libc1"
+ fi
+ fi
+ rm -f dummy.s dummy
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0
+ elif test "${UNAME_MACHINE}" = "mips" ; then
+ cat >dummy.c </dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ else
+ # Either a pre-BFD a.out linker (linux-gnuoldld)
+ # or one that does not give us useful --help.
+ # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout.
+ # If ld does not provide *any* "supported emulations:"
+ # that means it is gnuoldld.
+ echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:"
+ test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0
+
+ case "${UNAME_MACHINE}" in
+ i?86)
+ VENDOR=pc;
+ ;;
+ *)
+ VENDOR=unknown;
+ ;;
+ esac
+ # Determine whether the default compiler is a.out or elf
+ cat >dummy.c <
+main(argc, argv)
+ int argc;
+ char *argv[];
+{
+#ifdef __ELF__
+# ifdef __GLIBC__
+# if __GLIBC__ >= 2
+ printf ("%s-${VENDOR}-linux-gnu\n", argv[1]);
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+# else
+ printf ("%s-${VENDOR}-linux-gnulibc1\n", argv[1]);
+# endif
+#else
+ printf ("%s-${VENDOR}-linux-gnuaout\n", argv[1]);
+#endif
+ return 0;
+}
+EOF
+ ${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy "${UNAME_MACHINE}" && rm dummy.c dummy && exit 0
+ rm -f dummy.c dummy
+ fi ;;
+# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
+# are messed up and put the nodename in both sysname and nodename.
+ i?86:DYNIX/ptx:4*:*)
+ echo i386-sequent-sysv4
+ exit 0 ;;
+# added by chet for bash based on usenet posting from and
+# documentation on SCO's web site -- UnixWare 7 (SVR5)
+ i?86:UnixWare:5*:*)
+ echo ${UNAME_MACHINE}-pc-sysv5uw${UNAME_VERSION}
+ exit 0 ;;
+ i?86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit 0 ;;
+ i?86:*:4.*:* | i?86:SYSTEM_V:4.*:* | i?86:UNIX_SV:4.*:*)
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_RELEASE}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ i?86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit 0 ;;
+ pc:*:*:*)
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i386.
+ echo i386-pc-msdosdjgpp
+ exit 0 ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit 0 ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit 0 ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit 0 ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit 0 ;;
+ M68*:*:R3V[567]*:*)
+ test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
+ 3[34]??:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4.3${OS_REL} && exit 0
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && echo i486-ncr-sysv4 && exit 0 ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit 0 ;;
+ m68*:LynxOS:2.*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ i?86:LynxOS:2.*:*)
+ echo i386-pc-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ *:LynxOS:*:*)
+ echo ${UNAME_MACHINE}-unknown-lynxos${UNAME_RELEASE}
+ exit 0 ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit 0 ;;
+ RM*:SINIX-*:*:* | RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit 0 ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit 0 ;;
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says
+ echo i586-unisys-sysv4
+ exit 0 ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes .
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit 0 ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit 0 ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit 0 ;;
+ news*:NEWS-OS:*:6*)
+ echo mips-sony-newsos6
+ exit 0 ;;
+ R3000:*System_V*:*:* | R4000:UNIX_SYSV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit 0 ;;
+ PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says
+ echo i586-unisys-sysv4
+ exit 0 ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+cat >dummy.c <
+# include
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp9000) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+#if !defined (ultrix)
+ printf ("vax-dec-bsd\n"); exit (0);
+#else
+ printf ("vax-dec-ultrix\n"); exit (0);
+#endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+/* Begin cases added for Bash */
+#if defined (tahoe)
+ printf ("tahoe-cci-bsd\n"); exit (0);
+#endif
+
+#if defined (nec_ews)
+# if defined (SYSTYPE_SYSV)
+ printf ("ews4800-nec-sysv4\n"); exit 0;
+# else
+ printf ("ews4800-nec-bsd\n"); exit (0);
+# endif
+#endif
+
+#if defined (sony)
+# if defined (SYSTYPE_SYSV)
+ printf ("mips-sony-sysv4\n"); exit 0;
+# else
+ printf ("mips-sony-bsd\n"); exit (0);
+# endif
+#endif
+
+#if defined (ardent)
+ printf ("titan-ardent-bsd\n"); exit (0);
+#endif
+
+#if defined (stardent)
+ printf ("stardent-stardent-sysv\n"); exit (0);
+#endif
+
+#if defined (ibm032)
+ printf ("ibmrt-ibm-bsd4.3\n"); exit (0);
+#endif
+
+#if defined (sequent) && defined (i386)
+ printf ("i386-sequent-bsd\n"); exit (0);
+#endif
+
+#if defined (qnx) && defined (i386)
+ printf ("i386-pc-qnx\n"); exit (0);
+#endif
+
+#if defined (gould)
+ printf ("gould-gould-bsd\n"); exit (0);
+#endif
+
+#if defined (unixpc)
+ printf ("unixpc-att-sysv\n"); exit (0);
+#endif
+
+#if defined (att386)
+ printf ("i386-att-sysv3\n"); exit (0);
+#endif
+
+#if defined (__m88k) && defined (__UMAXV__)
+ printf ("m88k-encore-sysv3\n"); exit (0);
+#endif
+
+#if defined (drs6000)
+ printf ("drs6000-icl-sysv4.2\n"); exit (0);
+#endif
+
+#if defined (clipper)
+ printf ("clipper-orion-bsd\n"); exit (0);
+#endif
+
+#if defined (is68k)
+ printf ("m68k-isi-bsd\n"); exit (0);
+#endif
+
+#if defined (luna88k)
+ printf ("luna88k-omron-bsd\n"); exit (0);
+#endif
+
+#if defined (butterfly) && defined (BFLY1)
+ printf ("butterfly-bbn-mach\n"); exit (0);
+#endif
+
+#if defined (tower32)
+ printf ("tower32-ncr-sysv4\n"); exit (0);
+#endif
+
+#if defined (MagicStation)
+ printf ("magicstation-unknown-bsd\n"); exit (0);
+#endif
+
+#if defined (scs)
+ printf ("symmetric-scs-bsd4.2\n"); exit (0);
+#endif
+
+#if defined (tandem)
+ printf ("tandem-tandem-sysv\n"); exit (0);
+#endif
+
+#if defined (cadmus)
+ printf ("cadmus-pcs-sysv\n"); exit (0);
+#endif
+
+#if defined (masscomp)
+ printf ("masscomp-masscomp-sysv3\n"); exit (0);
+#endif
+
+#if defined (hbullx20)
+ printf ("hbullx20-bull-sysv3\n"); exit (0);
+#endif
+
+/* End cases added for Bash */
+
+ exit (1);
+}
+EOF
+
+${CC-cc} dummy.c -o dummy 2>/dev/null && ./dummy && rm dummy.c dummy && exit 0
+rm -f dummy.c dummy
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit 0 ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit 0 ;;
+ c34*)
+ echo c34-convex-bsd
+ exit 0 ;;
+ c38*)
+ echo c38-convex-bsd
+ exit 0 ;;
+ c4*)
+ echo c4-convex-bsd
+ exit 0 ;;
+ esac
+fi
+
+# Begin cases added for Bash
+case "$UNAME" in
+uts) echo uts-amdahl-sysv${UNAME_RELEASE}; exit 0 ;;
+esac
+
+if [ -d /usr/amiga ]; then
+ echo m68k-cbm-sysv${UNAME_RELEASE}; exit 0;
+fi
+
+if [ -f /bin/fxc.info ]; then
+ echo fxc-alliant-concentrix
+ exit 0
+fi
+# end cases added for Bash
+
+#echo '(Unable to guess system type)' 1>&2
+
+exit 1
config.guess
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: mkdist
===================================================================
--- mkdist (nonexistent)
+++ mkdist (revision 1765)
@@ -0,0 +1,100 @@
+#! /bin/bash -
+#
+# mkdist - make a distribution directory from a master manifest file
+#
+# usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version
+#
+# SRCDIR defaults to src
+# MANIFEST defaults to $SRCDIR/MANIFEST
+#
+
+SRCDIR=src
+ROOTNAME=bash
+
+usage()
+{
+ echo usage: mkdist [-m manifest] [-s srcdir] [-r rootname] [-v] version 1>&2
+ exit 2
+}
+
+vmsg()
+{
+ if [ -n "$verbose" ]; then
+ echo mkdist: "$@"
+ fi
+}
+
+while getopts m:s:r:v name
+do
+ case $name in
+ m) MANIFEST=$OPTARG ;;
+ s) SRCDIR=$OPTARG ;;
+ r) ROOTNAME=$OPTARG ;;
+ v) verbose=yes ;;
+ ?) usage ;;
+ esac
+done
+
+: ${MANIFEST:=$SRCDIR/MANIFEST}
+
+vmsg using $MANIFEST
+
+shift $(( $OPTIND - 1 ))
+
+if [ $# -lt 1 ]; then
+ usage
+fi
+
+version=$1
+newdir=${ROOTNAME}-$version
+
+vmsg creating distribution for $ROOTNAME version $version in $newdir
+
+if [ ! -d $newdir ]; then
+ mkdir $newdir || { echo $0: cannot make directory $newdir 1>&2 ; exit 1; }
+fi
+
+dirmode=755
+filmode=644
+
+while read fname type mode
+do
+ [ -z "$fname" ] && continue
+
+ case "$fname" in
+ \#*) continue ;;
+ esac
+
+ case "$type" in
+ d) mkdir $newdir/$fname ;;
+ f) cp -p $SRCDIR/$fname $newdir/$fname ;;
+ *) echo "unknown file type $type" 1>&2 ;;
+ esac
+
+ if [ -n "$mode" ]; then
+ chmod $mode $newdir/$fname
+ fi
+
+done < $MANIFEST
+
+# cut off the `-alpha' in something like `2.0-alpha', leaving just the
+# numeric version
+#version=${version%%-*}
+
+#case "$version" in
+#*.*.*) vers=${version%.*} ;;
+#*.*) vers=${version} ;;
+#esac
+
+#echo $vers > $newdir/.distribution
+
+#case "$version" in
+#*.*.*) plevel=${version##*.} ;;
+#*) plevel=0 ;;
+#esac
+#[ -z "$plevel" ] && plevel=0
+#echo ${plevel} > $newdir/.patchlevel
+
+vmsg $newdir created
+
+exit 0
mkdist
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: config.sub
===================================================================
--- config.sub (nonexistent)
+++ config.sub (revision 1765)
@@ -0,0 +1,992 @@
+#! /bin/sh
+# Configuration validation subroutine script, version 1.1.
+# Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330,
+# Boston, MA 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+if [ x$1 = x ]
+then
+ echo Configuration name missing. 1>&2
+ echo "Usage: $0 CPU-MFR-OPSYS" 1>&2
+ echo "or $0 ALIAS" 1>&2
+ echo where ALIAS is a recognized configuration type. 1>&2
+ exit 1
+fi
+
+# First pass through any local machine types.
+case $1 in
+ *local*)
+ echo $1
+ exit 0
+ ;;
+ *)
+ ;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ linux-gnu*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple )
+ os=
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ tahoe | i860 | m68k | m68000 | m88k | ns32k | arm \
+ | arme[lb] | pyramid \
+ | tron | a29k | 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 \
+ | hppa2.0 | alpha | we32k | ns16k | clipper | i370 | sh \
+ | powerpc | powerpcle | 1750a | dsp16xx | mips64 | mipsel \
+ | pdp11 | mips64el | mips64orion | mips64orionel \
+ | sparc | sparclet | sparclite | sparc64)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i[3456]86)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ vax-* | tahoe-* | i[3456]86-* | i860-* | m68k-* | m68000-* | m88k-* \
+ | sparc-* | ns32k-* | fx80-* | arm-* | c[123]* \
+ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* | power-* \
+ | none-* | 580-* | cray2-* | h8300-* | i960-* | xmp-* | ymp-* \
+ | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
+ | alpha-* | alphaev5-* | alphaev56-* | alphapca56-* | alphaev6-* \
+ | we32k-* | cydra-* | ns16k-* \
+ | pn-* | np1-* | xps100-* | clipper-* | orion-* | sparclite-* \
+ | pdp11-* | sh-* | powerpc-* | powerpcle-* | sparc64-* | mips64-* | mipsel-* \
+ | mips64el-* | mips64orion-* | mips64orionel-* | f301-* \
+ | butterfly-bbn* \
+ | cadmus-* | ews*-nec | ibmrt-ibm* | masscomp-masscomp \
+ | tandem-* | symmetric-* | drs6000-icl | *-*ardent | gould-gould \
+ | concurrent-* | ksr1-* | esa-ibm | fxc-alliant | *370-amdahl \
+ | *-convex | sx4*-nec)
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+# basic_machine=m68k-cbm
+ basic_machine=m68k-unknown
+ ;;
+ amigaos)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigados)
+ basic_machine=m68k-cbm
+ os=-amigados
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-cbm
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ cray2)
+ basic_machine=cray2-cray
+ os=-unicos
+ ;;
+ [ctj]90-cray)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ hbullx20-bull)
+ basic_machine=m68k-bull
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax | multimax)
+ basic_machine=ns32k-encore
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k7[0-9][0-9] | hp7[0-9][0-9] | hp9k8[0-9]7 | hp8[0-9]7)
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ ibm032-*)
+ basic_machine=ibmrt-ibm
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i[3456]86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i[3456]86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i[3456]86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i[3456]86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ luna88k-omron* | m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magicstation*)
+ basic_machine=magicstation-unknown
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ mipsel*-linux*)
+ basic_machine=mipsel-unknown
+ os=-linux
+ ;;
+ mips*-linux*)
+ basic_machine=mips-unknown
+ os=-linux
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ osr5 | sco5) # SCO Open Server
+ basic_machine=i386-pc
+ os=-sco3.2v5
+ ;;
+ odt | odt3 | odt4) # SCO Open Desktop
+ basic_machine=i386-pc
+ os=-sco3.2v4
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pentium | p5)
+ basic_machine=i586-intel
+ ;;
+ pentiumpro | p6)
+ basic_machine=i686-intel
+ ;;
+ pentium-* | p5-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ k5)
+ # We don't have specific support for AMD's K5 yet, so just call it a Pentium
+ basic_machine=i586-amd
+ ;;
+ nexen)
+ # We don't have specific support for Nexgen yet, so just call it a Pentium
+ basic_machine=i586-nexgen
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=rs6000-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ uw2 | unixware | unixware2)
+ basic_machine=i386-pc
+ os=-sysv4.2uw2.1
+ ;;
+ uw7 | unixware7)
+ basic_machine=i386-pc
+ os=-sysv5uw7
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ xmp)
+ basic_machine=xmp-cray
+ os=-unicos
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ mips)
+ if test "x$os" = "x-linux" ; then
+ basic_machine=mips-unknown
+ else
+ basic_machine=mips-mips
+ fi
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sparc)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ svr4*)
+ os=-sysv4
+ ;;
+ -unixware | -uw | -unixware2* | -uw2*)
+ os=-sysv4.2uw2.1
+ ;;
+ -unixware7* | -uw7*)
+ os=-sysv5uw7
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* | -aos* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \
+ | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -cygwin32* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -linux-gnu* | -uxpv* | -qnx* | -powerux* | -beos* | -rhapsody* \
+ | -superux* )
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ -sysvr5)
+ os=-sysv5
+ ;;
+ # This must come after -sysvr[45].
+ -sysv*)
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f301-fujitsu)
+ os=-uxpv
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -lynxos*)
+ vendor=lynx
+ ;;
+ -aix*)
+ vendor=ibm
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -vxsim* | -vxworks*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
config.sub
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property