Subversion Repositories or1k

/design_compiler/run/dodesign File deleted

design_compiler/run/dodesign Property changes : Deleted: svn:executable ## -1 +0,0 ## -* \ No newline at end of property Index: design_compiler/out/README =================================================================== --- design_compiler/out/README (revision 1765) +++ design_compiler/out/README (nonexistent) @@ -1 +0,0 @@ -This directory containts gate-level netlists. Index: design_compiler/bin/cons_vs_umc18.inc =================================================================== --- design_compiler/bin/cons_vs_umc18.inc (revision 1765) +++ design_compiler/bin/cons_vs_umc18.inc (nonexistent) @@ -1,50 +0,0 @@ -/* Constraints */ -CLK_UNCERTAINTY = 0.1 /* 100 ps */ -DFFPQ2_CKQ = 0.2 /* Clk to Q in technology time units */ -DFFPQ2_SETUP = 0.1 /* Setup time in technology time units */ - -/* Clocks constraints */ -create_clock CLK -period CLK_PERIOD -set_clock_skew all_clocks() -uncertainty CLK_UNCERTAINTY -set_dont_touch_network all_clocks() - -/* Reset constraints */ -set_driving_cell -none RST -set_drive 0 RST -set_dont_touch_network RST - -/* All inputs except reset and clock */ -all_inputs_wo_rst_clk = all_inputs() - CLK - RST - -/* Set output delays and load for output signals - * - * All outputs are assumed to go directly into - * external flip-flops for the purpose of this - * synthesis - */ -set_output_delay DFFPQ2_SETUP -clock CLK all_outputs() -set_load load_of(umcl18u250t2_typ/DFFPQ2/D) * 4 all_outputs() - -/* Input delay and driving cell of all inputs - * - * All these signals are assumed to come directly from - * flip-flops for the purpose of this synthesis - * - */ -set_input_delay DFFPQ2_CKQ -clock CLK all_inputs_wo_rst_clk -set_driving_cell -cell DFFPQ2 -pin Q all_inputs_wo_rst_clk - -/* Set design fanout */ -/* -set_max_fanout 10 TOPLEVEL -*/ - -/* Set area constraint */ -set_max_area MAX_AREA - -/* Optimize all near-critical paths to give extra slack for layout */ -c_range = CLK_PERIOD * 0.1 -group_path -critical_range c_range -name CLK -to CLK - -/* Operating conditions */ -set_operating_conditions TYPICAL Index: design_compiler/bin/save_design.inc =================================================================== --- design_compiler/bin/save_design.inc (revision 1765) +++ design_compiler/bin/save_design.inc (nonexistent) @@ -1,5 +0,0 @@ -/* Save current design using synopsys format */ -write -hierarchy -format db -output GATE_PATH + STAGE + _ + TOPLEVEL + .db - -/* Save current design using verilog format */ -write -hierarchy -format verilog -output GATE_PATH + STAGE + _ + TOPLEVEL + .v Index: design_compiler/bin/tech_vs_umc18.inc =================================================================== --- design_compiler/bin/tech_vs_umc18.inc (revision 1765) +++ design_compiler/bin/tech_vs_umc18.inc (nonexistent) @@ -1,16 +0,0 @@ -/* Set Virtual Silicon UMC 0.18u standard cell library */ - -search_path = {. /libs/Virtual_silicon/UMCL18U250D2_2.1/design_compiler/ } -snps = get_unix_variable("SYNOPSYS") -synthetic_library = { \ - snps + "/libraries/syn/dw01.sldb" \ - snps + "/libraries/syn/dw02.sldb" \ - snps + "/libraries/syn/dw03.sldb" \ - snps + "/libraries/syn/dw04.sldb" \ - snps + "/libraries/syn/dw05.sldb" \ - snps + "/libraries/syn/dw06.sldb" \ - snps + "/libraries/syn/dw07.sldb" } -target_library = { umcl18u250t2_typ.db } -link_library = target_library + synthetic_library -symbol_library = { umcl18u250t2.sdb } - Index: design_compiler/bin/reports.inc =================================================================== --- design_compiler/bin/reports.inc (revision 1765) +++ design_compiler/bin/reports.inc (nonexistent) @@ -1,10 +0,0 @@ -/* Basic reports */ -report_area > LOG_PATH + STAGE + _ + TOPLEVEL + _area.log -report_timing -nworst 10 > LOG_PATH + STAGE + _ + TOPLEVEL + _timing.log -report_hierarchy > LOG_PATH + STAGE + _ + TOPLEVEL + _hierarchy.log -report_resources > LOG_PATH + STAGE + _ + TOPLEVEL + _resources.log -report_constraint > LOG_PATH + STAGE + _ + TOPLEVEL + _constraint.log -/* -report_power > LOG_PATH + STAGE + _ + TOPLEVEL + _power.log -*/ - Index: design_compiler/bin/top.scr =================================================================== --- design_compiler/bin/top.scr (revision 1765) +++ design_compiler/bin/top.scr (nonexistent) @@ -1,64 +0,0 @@ -/* - * User defines for synthesizing RTC IP core - * - */ -TOPLEVEL = xfpga_top -include ../bin/select_tech.inc -CLK = clk -RST = rstn -CLK_PERIOD = 5 /* 200 MHz */ -MAX_AREA = 0 /* Push hard */ -DO_UNGROUP = yes /* yes, no */ -DO_VERIFY = yes /* yes, no */ - -/* Starting timestamp */ -sh date - -/* Set some basic variables related to environment */ -include ../bin/set_env.inc -STAGE = final - -/* Load libraries */ -include ../bin/tech_ + TECH + .inc - -/* Load HDL source files */ -include ../bin/read_design.inc > LOG_PATH + read_design_ + TOPLEVEL + .log - -/* Set design top */ -current_design TOPLEVEL - -/* Link all blocks and uniquify them */ -link -uniquify -check_design > LOG_PATH + check_design_ + TOPLEVEL + .log - -/* Apply constraints */ -if (TECH == "vs_umc18") { - include ../bin/cons_vs_umc18.inc -} else if (TECH == "art_umc18") { - include ../bin/cons_art_umc18.inc -} else { - echo "Error: Unsupported technology" - exit -} - -/* Lets do basic synthesis */ -if (DO_UNGROUP == "yes") { - ungroup -all -} -compile -boundary_optimization -map_effort low - -/* Dump gate-level from incremental synthesis */ -include ../bin/save_design.inc - -/* Generate reports for incremental synthesis */ -include ../bin/reports.inc - -/* Verify design */ -if (DO_VERIFY == "yes") { - compile -no_map -verify > LOG_PATH + verify_ + TOPLEVEL + .log -} - -/* Finish */ -sh date -exit Index: design_compiler/bin/select_tech.inc =================================================================== --- design_compiler/bin/select_tech.inc (revision 1765) +++ design_compiler/bin/select_tech.inc (nonexistent) @@ -1,5 +0,0 @@ -/* Defaults */ - -TECH = vs_umc18 /* vs_umc18, art_umc18 */ -CLK_PERIOD = 5 /* 200 MHz */ -MAX_AREA = 0 /* Push hard */ Index: design_compiler/bin/set_env.inc =================================================================== --- design_compiler/bin/set_env.inc (revision 1765) +++ design_compiler/bin/set_env.inc (nonexistent) @@ -1,20 +0,0 @@ -/* Enable Verilog HDL preprocessor */ -hdlin_enable_vpp = true - -/* Set log path */ -LOG_PATH = "../log/" - -/* Set gate-level netlist path */ -GATE_PATH = "../out/" - -/* Set RAMS_PATH */ -RAMS_PATH = "../../../lib/" - -/* Set RTL source path */ -RTL_PATH = { "../../../rtl/verilog/", "../../../rtl/verilog/audio/", \ - "../../../rtl/verilog/dbg_interface/", "../../../rtl/verilog/or1200/", \ - "../../../rtl/verilog/mem_if/", "../../../rtl/verilog/ssvga/" } - -/* Optimize adders */ -synlib_model_map_effort = high -hlo_share_effort = medium Index: design_compiler/bin/read_design.inc =================================================================== --- design_compiler/bin/read_design.inc (revision 1765) +++ design_compiler/bin/read_design.inc (nonexistent) @@ -1,87 +0,0 @@ -/* Set search path for verilog include files */ -search_path = search_path + RTL_PATH + { GATE_PATH } - -/* Read verilog files of the RTC IP core */ -if (TOPLEVEL == "xfpga_top") { - read -f verilog tcop_top.v - read -f verilog xfpga_top.v - - read -f verilog audio_codec_if.v - read -f verilog audio_top.v - read -f verilog audio_wb_if.v - read -f verilog fifo_4095_16.v - read -f verilog fifo_empty_16.v - - read -f verilog dbg_crc8_d1.v - read -f verilog dbg_defines.v - read -f verilog dbg_register.v - read -f verilog dbg_registers.v - read -f verilog dbg_sync_clk1_clk2.v - read -f verilog dbg_timescale.v - read -f verilog dbg_top.v - read -f verilog dbg_trace.v - - read -f verilog flash_top.v - read -f verilog sram_top.v - - read -f verilog alu.v - read -f verilog cfgr.v - read -f verilog cpu.v - read -f verilog dc.v - read -f verilog dc_fsm.v - read -f verilog dc_ram.v - read -f verilog dc_tag.v - read -f verilog defines.v - read -f verilog dmmu.v - read -f verilog dtlb.v - read -f verilog du.v - read -f verilog except.v - read -f verilog frz_logic.v - read -f verilog generic_dpram_32x32.v - read -f verilog generic_multp2_32x32.v - read -f verilog generic_spram_2048x32.v - read -f verilog generic_spram_2048x8.v - read -f verilog generic_spram_512x19.v - read -f verilog generic_spram_512x20.v - read -f verilog generic_spram_64x14.v - read -f verilog generic_spram_64x21.v - read -f verilog generic_spram_64x23.v - read -f verilog generic_spram_64x37.v - read -f verilog generic_tpram_32x32.v - read -f verilog ic.v - read -f verilog ic_fsm.v - read -f verilog ic_ram.v - read -f verilog ic_tag.v - read -f verilog id.v - read -f verilog ifetch.v - read -f verilog immu.v - read -f verilog itlb.v - read -f verilog lsu.v - read -f verilog mem2reg.v - read -f verilog mult_mac.v - read -f verilog operandmuxes.v - read -f verilog or1200.v - read -f verilog pic.v - read -f verilog pm.v - read -f verilog reg2mem.v - read -f verilog rf.v - read -f verilog sprs.v - read -f verilog tt.v - read -f verilog wb_biu.v - read -f verilog wbmux.v - - read -f verilog xcv_ram32x8d.v - - read -f verilog crtc_iob.v - read -f verilog ssvga_crtc.v - read -f verilog ssvga_defines.v - read -f verilog ssvga_fifo.v - read -f verilog ssvga_top.v - read -f verilog ssvga_wbm_if.v - read -f verilog ssvga_wbs_if.v - -} else { - echo "Non-existing top level." - exit -} - Index: design_compiler/bin/cons_art_umc18.inc =================================================================== --- design_compiler/bin/cons_art_umc18.inc (revision 1765) +++ design_compiler/bin/cons_art_umc18.inc (nonexistent) @@ -1,50 +0,0 @@ -/* Constraints */ -CLK_UNCERTAINTY = 0.1 /* 100 ps */ -DFFHQX2_CKQ = 0.2 /* Clk to Q in technology time units */ -DFFHQX2_SETUP = 0.1 /* Setup time in technology time units */ - -/* Clocks constraints */ -create_clock CLK -period CLK_PERIOD -set_clock_skew all_clocks() -uncertainty CLK_UNCERTAINTY -set_dont_touch_network all_clocks() - -/* Reset constraints */ -set_driving_cell -none RST -set_drive 0 RST -set_dont_touch_network RST - -/* All inputs except reset and clock */ -all_inputs_wo_rst_clk = all_inputs() - CLK - RST - -/* Set output delays and load for output signals - * - * All outputs are assumed to go directly into - * external flip-flops for the purpose of this - * synthesis - */ -set_output_delay DFFHQX2_SETUP -clock CLK all_outputs() -set_load load_of(typical/DFFHQX2/D) * 1 all_outputs() - -/* Input delay and driving cell of all inputs - * - * All these signals are assumed to come directly from - * flip-flops for the purpose of this synthesis - * - */ -set_input_delay DFFHQX2_CKQ -clock CLK all_inputs_wo_rst_clk -set_driving_cell -cell DFFHQX2 -pin Q all_inputs_wo_rst_clk - -/* Set design fanout */ -/* -set_max_fanout 10 TOPLEVEL -*/ - -/* Set area constraint */ -set_max_area MAX_AREA - -/* Optimize all near-critical paths to give extra slack for layout */ -c_range = CLK_PERIOD * 0.05 -group_path -critical_range c_range -name CLK -to CLK - -/* Operating conditions */ -set_operating_conditions typical Index: design_compiler/bin/tech_art_umc18.inc =================================================================== --- design_compiler/bin/tech_art_umc18.inc (revision 1765) +++ design_compiler/bin/tech_art_umc18.inc (nonexistent) @@ -1,17 +0,0 @@ -/* Set Artisan Sage-X UMC 0.18u standard cell library */ - -search_path = {. /libs/Artisan/aci/sc-x/synopsys/ } + \ - { /libs/Artisan/aci/sc-x/symbols/synopsys/ } -snps = get_unix_variable("SYNOPSYS") -synthetic_library = { \ - snps + "/libraries/syn/dw01.sldb" \ - snps + "/libraries/syn/dw02.sldb" \ - snps + "/libraries/syn/dw03.sldb" \ - snps + "/libraries/syn/dw04.sldb" \ - snps + "/libraries/syn/dw05.sldb" \ - snps + "/libraries/syn/dw06.sldb" \ - snps + "/libraries/syn/dw07.sldb" } -target_library = { typical.db } -link_library = target_library + synthetic_library -symbol_library = { umc18.sdb } -