URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/tags/nog_patch_47/or1ksim/testbench
- from Rev 1419 to Rev 1765
- ↔ Reverse comparison
Rev 1419 → Rev 1765
/dmatest.c
0,0 → 1,172
/* DMA test */ |
|
#include "support.h" |
#include "board.h" |
#include "../peripheral/fields.h" |
#include "../peripheral/dma_defs.h" |
|
typedef volatile unsigned long *DMA_REG; |
|
DMA_REG csr = (unsigned long *)(DMA_BASE + DMA_CSR), |
int_msk_a = (unsigned long *)(DMA_BASE + DMA_INT_MSK_A), |
int_msk_b = (unsigned long *)(DMA_BASE + DMA_INT_MSK_B), |
int_src_a = (unsigned long *)(DMA_BASE + DMA_INT_SRC_A), |
int_src_b = (unsigned long *)(DMA_BASE + DMA_INT_SRC_B), |
ch0_csr = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_CSR), |
ch0_sz = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_SZ), |
ch0_a0 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_A0), |
ch0_am0 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_AM0), |
ch0_a1 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_A1), |
ch0_am1 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_AM1), |
ch0_desc = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_DESC); |
|
struct DMA_DESCRIPTOR |
{ |
unsigned long csr; |
unsigned long adr0; |
unsigned long adr1; |
unsigned long next; |
}; |
|
|
/* Test simplest DMA operation */ |
int simple( void ) |
{ |
int ok; |
unsigned long src[2], dst[2]; |
|
/* Set transfer Size */ |
*ch0_sz = 0x00000002; |
|
/* Set addresses */ |
*ch0_a0 = (unsigned long)src; |
*ch0_a1 = (unsigned long)dst; |
|
/* Fill source */ |
src[0] = 0x01234567LU; |
src[1] = 0x89ABCDEFLU; |
|
/* Now set channel CSR */ |
*ch0_csr = FLAG_MASK( DMA_CH_CSR, CH_EN ) | FLAG_MASK( DMA_CH_CSR, INC_SRC ) | FLAG_MASK( DMA_CH_CSR, INC_DST ); |
|
/* Wait till the channel finishes */ |
while ( TEST_FLAG( *ch0_csr, DMA_CH_CSR, BUSY ) ) |
; |
|
/* Dump contents of memory */ |
ok = (dst[0] == src[0] && dst[1] == src[1]); |
report( ok ); |
|
return ok; |
} |
|
|
/* Test simple transfer with chunks */ |
int chunks( void ) |
{ |
unsigned i, ok; |
unsigned long src[6], dst[6]; |
|
/* Set transfer size */ |
*ch0_sz = 6LU | (3LU << DMA_CH_SZ_CHK_SZ_OFFSET); |
|
/* Set addresses */ |
*ch0_a0 = (unsigned long)src; |
*ch0_a1 = (unsigned long)dst; |
|
/* Fill source */ |
for ( i = 0; i < 6; ++ i ) |
src[i] = 0xA63F879CLU + i; |
|
/* Now set channel CSR */ |
*ch0_csr = FLAG_MASK( DMA_CH_CSR, CH_EN ) | FLAG_MASK( DMA_CH_CSR, INC_SRC ) | FLAG_MASK( DMA_CH_CSR, INC_DST ); |
|
/* Wait till the channel finishes */ |
while ( TEST_FLAG( *ch0_csr, DMA_CH_CSR, BUSY ) ) |
; |
|
/* Dump contents of memory */ |
ok = 1; |
for ( i = 0; i < 6 && ok; ++ i ) |
if ( dst[i] != src[i] ) |
ok = 0; |
report( i ); |
|
return ok; |
} |
|
/* Test transfer using linked list */ |
int list( void ) |
{ |
struct DMA_DESCRIPTOR desc[2]; |
unsigned long src[10], dst[10]; |
unsigned i, ok; |
|
/* Set transfer size for each list element */ |
desc[0].csr = 6; |
desc[1].csr = 4; |
|
/* Set chunk size */ |
*ch0_sz = 2UL << DMA_CH_SZ_CHK_SZ_OFFSET; |
|
/* Set addresses */ |
desc[0].adr0 = (unsigned long)src; |
desc[0].adr1 = (unsigned long)dst; |
desc[1].adr0 = (unsigned long)(src + 6); |
desc[1].adr1 = (unsigned long)(dst + 6); |
|
/* Fill source */ |
for ( i = 0; i < 10; ++ i ) |
src[i] = 0x110BD540FLU + i; |
|
/* Set descriptor CSR */ |
desc[0].csr |= FLAG_MASK( DMA_DESC_CSR, INC_SRC ) | FLAG_MASK( DMA_DESC_CSR, INC_DST ); |
desc[1].csr |= FLAG_MASK( DMA_DESC_CSR, EOL ) | FLAG_MASK( DMA_DESC_CSR, INC_SRC ) | FLAG_MASK( DMA_DESC_CSR, INC_DST ); |
|
/* Point channel to descriptor */ |
*ch0_desc = (unsigned)desc; |
|
/* Link the list */ |
desc[0].next = (unsigned)&(desc[1]); |
desc[1].next = 0xDEADDEADUL; |
|
/* Set channel CSR */ |
*ch0_csr = FLAG_MASK( DMA_CH_CSR, CH_EN ) | FLAG_MASK( DMA_CH_CSR, USE_ED ); |
|
/* Wait till the channel finishes */ |
while ( TEST_FLAG( *ch0_csr, DMA_CH_CSR, BUSY ) ) |
; |
|
ok = TEST_FLAG( *ch0_csr, DMA_CH_CSR, DONE ); |
|
/* Dump contents of memory */ |
for ( i = 0; i < 10 && ok; ++ i ) |
if ( dst[i] != src[i] ) |
ok = 0; |
report( i ); |
|
return ok; |
} |
|
|
int main() |
{ |
int pass_simple, pass_chunks, pass_list; |
printf( "Starting DMA test\n" ); |
|
printf( " Simple DMA: " ); |
printf( (pass_simple = simple()) ? "Passed\n" : "Failed\n" ); |
printf( " Chunks DMA: " ); |
printf( (pass_chunks = chunks()) ? "Passed\n" : "Failed\n" ); |
printf( " List DMA: " ); |
printf( (pass_list = list()) ? "Passed\n" : "Failed\n" ); |
|
printf( "Ending DMA test\n" ); |
if (pass_simple && pass_chunks && pass_list) { |
report (0xdeaddead); |
return 0; |
} else |
return 3 - pass_simple - pass_chunks - pass_list; |
} |
|
|
/configure
0,0 → 1,5021
#! /bin/sh |
# From configure.in for or1ksim-1.2, version 2.14, from autoconf version AC_ACVERSION. |
# Guess values for system-dependent variables and create Makefiles. |
# Generated by GNU Autoconf 2.57. |
# |
# Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 |
# Free Software Foundation, Inc. |
# This configure script is free software; the Free Software Foundation |
# gives unlimited permission to copy, distribute and modify it. |
## --------------------- ## |
## M4sh Initialization. ## |
## --------------------- ## |
# |
|
# Be Bourne compatible |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
set -o posix |
fi |
|
# Support unset when possible. |
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then |
as_unset=unset |
else |
as_unset=false |
fi |
|
|
# Work around bugs in pre-3.0 UWIN ksh. |
$as_unset ENV MAIL MAILPATH |
PS1='$ ' |
PS2='> ' |
PS4='+ ' |
|
# NLS nuisances. |
for as_var in \ |
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
LC_TELEPHONE LC_TIME |
do |
if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then |
eval $as_var=C; export $as_var |
else |
$as_unset $as_var |
fi |
done |
|
# Required to use basename. |
if expr a : '\(a\)' >/dev/null 2>&1; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
as_basename=basename |
else |
as_basename=false |
fi |
|
|
# Name of the executable. |
as_me=`$as_basename "$0" || |
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)$' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X/"$0" | |
sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
/^X\/\(\/\/\)$/{ s//\1/; q; } |
/^X\/\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
|
|
# PATH needs CR, and LINENO needs CR and PATH. |
# Avoid depending upon Character Ranges. |
as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
as_cr_digits='0123456789' |
as_cr_alnum=$as_cr_Letters$as_cr_digits |
|
# The user is always right. |
if test "${PATH_SEPARATOR+set}" != set; then |
echo "#! /bin/sh" >conf$$.sh |
echo "exit 0" >>conf$$.sh |
chmod +x conf$$.sh |
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
PATH_SEPARATOR=';' |
else |
PATH_SEPARATOR=: |
fi |
rm -f conf$$.sh |
fi |
|
|
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x$as_lineno_3" = "x$as_lineno_2" || { |
# Find who we are. Look in the path if we contain no path at all |
# relative or not. |
case $0 in |
*[\\/]* ) as_myself=$0 ;; |
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
done |
|
;; |
esac |
# We did not find ourselves, most probably we were run as `sh COMMAND' |
# in which case we are not to be found in the path. |
if test "x$as_myself" = x; then |
as_myself=$0 |
fi |
if test ! -f "$as_myself"; then |
{ echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 |
{ (exit 1); exit 1; }; } |
fi |
case $CONFIG_SHELL in |
'') |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for as_base in sh bash ksh sh5; do |
case $as_dir in |
/*) |
if ("$as_dir/$as_base" -c ' |
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
$as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
$as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
CONFIG_SHELL=$as_dir/$as_base |
export CONFIG_SHELL |
exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
fi;; |
esac |
done |
done |
;; |
esac |
|
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
# uniformly replaced by the line number. The first 'sed' inserts a |
# line-number line before each line; the second 'sed' does the real |
# work. The second script uses 'N' to pair each line-number line |
# with the numbered line, and appends trailing '-' during |
# substitution so that $LINENO is not a special case at line end. |
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
# second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
sed '=' <$as_myself | |
sed ' |
N |
s,$,-, |
: loop |
s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
t loop |
s,-$,, |
s,^['$as_cr_digits']*\n,, |
' >$as_me.lineno && |
chmod +x $as_me.lineno || |
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 |
{ (exit 1); exit 1; }; } |
|
# Don't try to exec as it changes $[0], causing all sort of problems |
# (the dirname of $[0] is not the place where we might find the |
# original and so on. Autoconf is especially sensible to this). |
. ./$as_me.lineno |
# Exit status is that of the last command. |
exit |
} |
|
|
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
*c*,-n*) ECHO_N= ECHO_C=' |
' ECHO_T=' ' ;; |
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
*) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
esac |
|
if expr a : '\(a\)' >/dev/null 2>&1; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
rm -f conf$$ conf$$.exe conf$$.file |
echo >conf$$.file |
if ln -s conf$$.file conf$$ 2>/dev/null; then |
# We could just check for DJGPP; but this test a) works b) is more generic |
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
if test -f conf$$.exe; then |
# Don't use ln at all; we don't have any links |
as_ln_s='cp -p' |
else |
as_ln_s='ln -s' |
fi |
elif ln conf$$.file conf$$ 2>/dev/null; then |
as_ln_s=ln |
else |
as_ln_s='cp -p' |
fi |
rm -f conf$$ conf$$.exe conf$$.file |
|
if mkdir -p . 2>/dev/null; then |
as_mkdir_p=: |
else |
as_mkdir_p=false |
fi |
|
as_executable_p="test -f" |
|
# Sed expression to map a string onto a valid CPP name. |
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" |
|
# Sed expression to map a string onto a valid variable name. |
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" |
|
|
# IFS |
# We need space, tab and new line, in precisely that order. |
as_nl=' |
' |
IFS=" $as_nl" |
|
# CDPATH. |
$as_unset CDPATH |
|
|
# Name of the host. |
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, |
# so uname gets run too. |
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` |
|
exec 6>&1 |
|
# |
# Initializations. |
# |
ac_default_prefix=/usr/local |
ac_config_libobj_dir=. |
cross_compiling=no |
subdirs= |
MFLAGS= |
MAKEFLAGS= |
SHELL=${CONFIG_SHELL-/bin/sh} |
|
# Maximum number of lines to put in a shell here document. |
# This variable seems obsolete. It should probably be removed, and |
# only ac_max_sed_lines should be used. |
: ${ac_max_here_lines=38} |
|
# Identity of this package. |
PACKAGE_NAME= |
PACKAGE_TARNAME= |
PACKAGE_VERSION= |
PACKAGE_STRING= |
PACKAGE_BUGREPORT= |
|
ac_unique_file="support/support.h" |
ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CC ac_ct_CC RANLIB ac_ct_RANLIB LD ac_ct_LD SIM ac_ct_SIM CFLAGS LDFLAGS CPPFLAGS EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE CPP EGREP CCAS CCASFLAGS MAKE_SHELL TESTS_ENV OR1K_SRCDIR OR1K_EXCEPT_TRUE OR1K_EXCEPT_FALSE INCLUDES LIBOBJS LTLIBOBJS' |
ac_subst_files='' |
|
# Initialize some variables set by options. |
ac_init_help= |
ac_init_version=false |
# The variables have the same names as the options, with |
# dashes changed to underlines. |
cache_file=/dev/null |
exec_prefix=NONE |
no_create= |
no_recursion= |
prefix=NONE |
program_prefix=NONE |
program_suffix=NONE |
program_transform_name=s,x,x, |
silent= |
site= |
srcdir= |
verbose= |
x_includes=NONE |
x_libraries=NONE |
|
# Installation directory options. |
# These are left unexpanded so users can "make install exec_prefix=/foo" |
# and all the variables that are supposed to be based on exec_prefix |
# by default will actually change. |
# Use braces instead of parens because sh, perl, etc. also accept them. |
bindir='${exec_prefix}/bin' |
sbindir='${exec_prefix}/sbin' |
libexecdir='${exec_prefix}/libexec' |
datadir='${prefix}/share' |
sysconfdir='${prefix}/etc' |
sharedstatedir='${prefix}/com' |
localstatedir='${prefix}/var' |
libdir='${exec_prefix}/lib' |
includedir='${prefix}/include' |
oldincludedir='/usr/include' |
infodir='${prefix}/info' |
mandir='${prefix}/man' |
|
ac_prev= |
for ac_option |
do |
# If the previous option needs an argument, assign it. |
if test -n "$ac_prev"; then |
eval "$ac_prev=\$ac_option" |
ac_prev= |
continue |
fi |
|
ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` |
|
# Accept the important Cygnus configure options, so we can diagnose typos. |
|
case $ac_option in |
|
-bindir | --bindir | --bindi | --bind | --bin | --bi) |
ac_prev=bindir ;; |
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) |
bindir=$ac_optarg ;; |
|
-build | --build | --buil | --bui | --bu) |
ac_prev=build_alias ;; |
-build=* | --build=* | --buil=* | --bui=* | --bu=*) |
build_alias=$ac_optarg ;; |
|
-cache-file | --cache-file | --cache-fil | --cache-fi \ |
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) |
ac_prev=cache_file ;; |
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ |
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) |
cache_file=$ac_optarg ;; |
|
--config-cache | -C) |
cache_file=config.cache ;; |
|
-datadir | --datadir | --datadi | --datad | --data | --dat | --da) |
ac_prev=datadir ;; |
-datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ |
| --da=*) |
datadir=$ac_optarg ;; |
|
-disable-* | --disable-*) |
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
{ (exit 1); exit 1; }; } |
ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
eval "enable_$ac_feature=no" ;; |
|
-enable-* | --enable-*) |
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && |
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2 |
{ (exit 1); exit 1; }; } |
ac_feature=`echo $ac_feature | sed 's/-/_/g'` |
case $ac_option in |
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
*) ac_optarg=yes ;; |
esac |
eval "enable_$ac_feature='$ac_optarg'" ;; |
|
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ |
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ |
| --exec | --exe | --ex) |
ac_prev=exec_prefix ;; |
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ |
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ |
| --exec=* | --exe=* | --ex=*) |
exec_prefix=$ac_optarg ;; |
|
-gas | --gas | --ga | --g) |
# Obsolete; use --with-gas. |
with_gas=yes ;; |
|
-help | --help | --hel | --he | -h) |
ac_init_help=long ;; |
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*) |
ac_init_help=recursive ;; |
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*) |
ac_init_help=short ;; |
|
-host | --host | --hos | --ho) |
ac_prev=host_alias ;; |
-host=* | --host=* | --hos=* | --ho=*) |
host_alias=$ac_optarg ;; |
|
-includedir | --includedir | --includedi | --included | --include \ |
| --includ | --inclu | --incl | --inc) |
ac_prev=includedir ;; |
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ |
| --includ=* | --inclu=* | --incl=* | --inc=*) |
includedir=$ac_optarg ;; |
|
-infodir | --infodir | --infodi | --infod | --info | --inf) |
ac_prev=infodir ;; |
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) |
infodir=$ac_optarg ;; |
|
-libdir | --libdir | --libdi | --libd) |
ac_prev=libdir ;; |
-libdir=* | --libdir=* | --libdi=* | --libd=*) |
libdir=$ac_optarg ;; |
|
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ |
| --libexe | --libex | --libe) |
ac_prev=libexecdir ;; |
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ |
| --libexe=* | --libex=* | --libe=*) |
libexecdir=$ac_optarg ;; |
|
-localstatedir | --localstatedir | --localstatedi | --localstated \ |
| --localstate | --localstat | --localsta | --localst \ |
| --locals | --local | --loca | --loc | --lo) |
ac_prev=localstatedir ;; |
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ |
| --localstate=* | --localstat=* | --localsta=* | --localst=* \ |
| --locals=* | --local=* | --loca=* | --loc=* | --lo=*) |
localstatedir=$ac_optarg ;; |
|
-mandir | --mandir | --mandi | --mand | --man | --ma | --m) |
ac_prev=mandir ;; |
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) |
mandir=$ac_optarg ;; |
|
-nfp | --nfp | --nf) |
# Obsolete; use --without-fp. |
with_fp=no ;; |
|
-no-create | --no-create | --no-creat | --no-crea | --no-cre \ |
| --no-cr | --no-c | -n) |
no_create=yes ;; |
|
-no-recursion | --no-recursion | --no-recursio | --no-recursi \ |
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) |
no_recursion=yes ;; |
|
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ |
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ |
| --oldin | --oldi | --old | --ol | --o) |
ac_prev=oldincludedir ;; |
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ |
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ |
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) |
oldincludedir=$ac_optarg ;; |
|
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p) |
ac_prev=prefix ;; |
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) |
prefix=$ac_optarg ;; |
|
-program-prefix | --program-prefix | --program-prefi | --program-pref \ |
| --program-pre | --program-pr | --program-p) |
ac_prev=program_prefix ;; |
-program-prefix=* | --program-prefix=* | --program-prefi=* \ |
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) |
program_prefix=$ac_optarg ;; |
|
-program-suffix | --program-suffix | --program-suffi | --program-suff \ |
| --program-suf | --program-su | --program-s) |
ac_prev=program_suffix ;; |
-program-suffix=* | --program-suffix=* | --program-suffi=* \ |
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) |
program_suffix=$ac_optarg ;; |
|
-program-transform-name | --program-transform-name \ |
| --program-transform-nam | --program-transform-na \ |
| --program-transform-n | --program-transform- \ |
| --program-transform | --program-transfor \ |
| --program-transfo | --program-transf \ |
| --program-trans | --program-tran \ |
| --progr-tra | --program-tr | --program-t) |
ac_prev=program_transform_name ;; |
-program-transform-name=* | --program-transform-name=* \ |
| --program-transform-nam=* | --program-transform-na=* \ |
| --program-transform-n=* | --program-transform-=* \ |
| --program-transform=* | --program-transfor=* \ |
| --program-transfo=* | --program-transf=* \ |
| --program-trans=* | --program-tran=* \ |
| --progr-tra=* | --program-tr=* | --program-t=*) |
program_transform_name=$ac_optarg ;; |
|
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
silent=yes ;; |
|
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) |
ac_prev=sbindir ;; |
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ |
| --sbi=* | --sb=*) |
sbindir=$ac_optarg ;; |
|
-sharedstatedir | --sharedstatedir | --sharedstatedi \ |
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \ |
| --sharedst | --shareds | --shared | --share | --shar \ |
| --sha | --sh) |
ac_prev=sharedstatedir ;; |
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ |
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ |
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ |
| --sha=* | --sh=*) |
sharedstatedir=$ac_optarg ;; |
|
-site | --site | --sit) |
ac_prev=site ;; |
-site=* | --site=* | --sit=*) |
site=$ac_optarg ;; |
|
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr) |
ac_prev=srcdir ;; |
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) |
srcdir=$ac_optarg ;; |
|
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ |
| --syscon | --sysco | --sysc | --sys | --sy) |
ac_prev=sysconfdir ;; |
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ |
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) |
sysconfdir=$ac_optarg ;; |
|
-target | --target | --targe | --targ | --tar | --ta | --t) |
ac_prev=target_alias ;; |
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) |
target_alias=$ac_optarg ;; |
|
-v | -verbose | --verbose | --verbos | --verbo | --verb) |
verbose=yes ;; |
|
-version | --version | --versio | --versi | --vers | -V) |
ac_init_version=: ;; |
|
-with-* | --with-*) |
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
{ echo "$as_me: error: invalid package name: $ac_package" >&2 |
{ (exit 1); exit 1; }; } |
ac_package=`echo $ac_package| sed 's/-/_/g'` |
case $ac_option in |
*=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; |
*) ac_optarg=yes ;; |
esac |
eval "with_$ac_package='$ac_optarg'" ;; |
|
-without-* | --without-*) |
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` |
# Reject names that are not valid shell variable names. |
expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && |
{ echo "$as_me: error: invalid package name: $ac_package" >&2 |
{ (exit 1); exit 1; }; } |
ac_package=`echo $ac_package | sed 's/-/_/g'` |
eval "with_$ac_package=no" ;; |
|
--x) |
# Obsolete; use --with-x. |
with_x=yes ;; |
|
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ |
| --x-incl | --x-inc | --x-in | --x-i) |
ac_prev=x_includes ;; |
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ |
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) |
x_includes=$ac_optarg ;; |
|
-x-libraries | --x-libraries | --x-librarie | --x-librari \ |
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) |
ac_prev=x_libraries ;; |
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ |
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) |
x_libraries=$ac_optarg ;; |
|
-*) { echo "$as_me: error: unrecognized option: $ac_option |
Try \`$0 --help' for more information." >&2 |
{ (exit 1); exit 1; }; } |
;; |
|
*=*) |
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` |
# Reject names that are not valid shell variable names. |
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && |
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2 |
{ (exit 1); exit 1; }; } |
ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` |
eval "$ac_envvar='$ac_optarg'" |
export $ac_envvar ;; |
|
*) |
# FIXME: should be removed in autoconf 3.0. |
echo "$as_me: WARNING: you should use --build, --host, --target" >&2 |
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && |
echo "$as_me: WARNING: invalid host type: $ac_option" >&2 |
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} |
;; |
|
esac |
done |
|
if test -n "$ac_prev"; then |
ac_option=--`echo $ac_prev | sed 's/_/-/g'` |
{ echo "$as_me: error: missing argument to $ac_option" >&2 |
{ (exit 1); exit 1; }; } |
fi |
|
# Be sure to have absolute paths. |
for ac_var in exec_prefix prefix |
do |
eval ac_val=$`echo $ac_var` |
case $ac_val in |
[\\/$]* | ?:[\\/]* | NONE | '' ) ;; |
*) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
{ (exit 1); exit 1; }; };; |
esac |
done |
|
# Be sure to have absolute paths. |
for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ |
localstatedir libdir includedir oldincludedir infodir mandir |
do |
eval ac_val=$`echo $ac_var` |
case $ac_val in |
[\\/$]* | ?:[\\/]* ) ;; |
*) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 |
{ (exit 1); exit 1; }; };; |
esac |
done |
|
# There might be people who depend on the old broken behavior: `$host' |
# used to hold the argument of --host etc. |
# FIXME: To remove some day. |
build=$build_alias |
host=$host_alias |
target=$target_alias |
|
# FIXME: To remove some day. |
if test "x$host_alias" != x; then |
if test "x$build_alias" = x; then |
cross_compiling=maybe |
echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. |
If a cross compiler is detected then cross compile mode will be used." >&2 |
elif test "x$build_alias" != "x$host_alias"; then |
cross_compiling=yes |
fi |
fi |
|
ac_tool_prefix= |
test -n "$host_alias" && ac_tool_prefix=$host_alias- |
|
test "$silent" = yes && exec 6>/dev/null |
|
|
# Find the source files, if location was not specified. |
if test -z "$srcdir"; then |
ac_srcdir_defaulted=yes |
# Try the directory containing this script, then its parent. |
ac_confdir=`(dirname "$0") 2>/dev/null || |
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$0" : 'X\(//\)[^/]' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$0" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
srcdir=$ac_confdir |
if test ! -r $srcdir/$ac_unique_file; then |
srcdir=.. |
fi |
else |
ac_srcdir_defaulted=no |
fi |
if test ! -r $srcdir/$ac_unique_file; then |
if test "$ac_srcdir_defaulted" = yes; then |
{ echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 |
{ (exit 1); exit 1; }; } |
else |
{ echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 |
{ (exit 1); exit 1; }; } |
fi |
fi |
(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || |
{ echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 |
{ (exit 1); exit 1; }; } |
srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` |
ac_env_build_alias_set=${build_alias+set} |
ac_env_build_alias_value=$build_alias |
ac_cv_env_build_alias_set=${build_alias+set} |
ac_cv_env_build_alias_value=$build_alias |
ac_env_host_alias_set=${host_alias+set} |
ac_env_host_alias_value=$host_alias |
ac_cv_env_host_alias_set=${host_alias+set} |
ac_cv_env_host_alias_value=$host_alias |
ac_env_target_alias_set=${target_alias+set} |
ac_env_target_alias_value=$target_alias |
ac_cv_env_target_alias_set=${target_alias+set} |
ac_cv_env_target_alias_value=$target_alias |
ac_env_CC_set=${CC+set} |
ac_env_CC_value=$CC |
ac_cv_env_CC_set=${CC+set} |
ac_cv_env_CC_value=$CC |
ac_env_CFLAGS_set=${CFLAGS+set} |
ac_env_CFLAGS_value=$CFLAGS |
ac_cv_env_CFLAGS_set=${CFLAGS+set} |
ac_cv_env_CFLAGS_value=$CFLAGS |
ac_env_LDFLAGS_set=${LDFLAGS+set} |
ac_env_LDFLAGS_value=$LDFLAGS |
ac_cv_env_LDFLAGS_set=${LDFLAGS+set} |
ac_cv_env_LDFLAGS_value=$LDFLAGS |
ac_env_CPPFLAGS_set=${CPPFLAGS+set} |
ac_env_CPPFLAGS_value=$CPPFLAGS |
ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} |
ac_cv_env_CPPFLAGS_value=$CPPFLAGS |
ac_env_CPP_set=${CPP+set} |
ac_env_CPP_value=$CPP |
ac_cv_env_CPP_set=${CPP+set} |
ac_cv_env_CPP_value=$CPP |
|
# |
# Report the --help message. |
# |
if test "$ac_init_help" = "long"; then |
# Omit some internal or obsolete options to make the list less imposing. |
# This message is too long to be a string in the A/UX 3.1 sh. |
cat <<_ACEOF |
\`configure' configures this package to adapt to many kinds of systems. |
|
Usage: $0 [OPTION]... [VAR=VALUE]... |
|
To assign environment variables (e.g., CC, CFLAGS...), specify them as |
VAR=VALUE. See below for descriptions of some of the useful variables. |
|
Defaults for the options are specified in brackets. |
|
Configuration: |
-h, --help display this help and exit |
--help=short display options specific to this package |
--help=recursive display the short help of all the included packages |
-V, --version display version information and exit |
-q, --quiet, --silent do not print \`checking...' messages |
--cache-file=FILE cache test results in FILE [disabled] |
-C, --config-cache alias for \`--cache-file=config.cache' |
-n, --no-create do not create output files |
--srcdir=DIR find the sources in DIR [configure dir or \`..'] |
|
_ACEOF |
|
cat <<_ACEOF |
Installation directories: |
--prefix=PREFIX install architecture-independent files in PREFIX |
[$ac_default_prefix] |
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX |
[PREFIX] |
|
By default, \`make install' will install all the files in |
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify |
an installation prefix other than \`$ac_default_prefix' using \`--prefix', |
for instance \`--prefix=\$HOME'. |
|
For better control, use the options below. |
|
Fine tuning of the installation directories: |
--bindir=DIR user executables [EPREFIX/bin] |
--sbindir=DIR system admin executables [EPREFIX/sbin] |
--libexecdir=DIR program executables [EPREFIX/libexec] |
--datadir=DIR read-only architecture-independent data [PREFIX/share] |
--sysconfdir=DIR read-only single-machine data [PREFIX/etc] |
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] |
--localstatedir=DIR modifiable single-machine data [PREFIX/var] |
--libdir=DIR object code libraries [EPREFIX/lib] |
--includedir=DIR C header files [PREFIX/include] |
--oldincludedir=DIR C header files for non-gcc [/usr/include] |
--infodir=DIR info documentation [PREFIX/info] |
--mandir=DIR man documentation [PREFIX/man] |
_ACEOF |
|
cat <<\_ACEOF |
|
Program names: |
--program-prefix=PREFIX prepend PREFIX to installed program names |
--program-suffix=SUFFIX append SUFFIX to installed program names |
--program-transform-name=PROGRAM run sed PROGRAM on installed program names |
|
System types: |
--build=BUILD configure for building on BUILD [guessed] |
--host=HOST cross-compile to build programs to run on HOST [BUILD] |
_ACEOF |
fi |
|
if test -n "$ac_init_help"; then |
|
cat <<\_ACEOF |
|
Optional Features: |
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) |
--enable-FEATURE[=ARG] include FEATURE [ARG=yes] |
--disable-dependency-tracking Speeds up one-time builds |
--enable-dependency-tracking Do not reject slow dependency extractors |
--enable-opt enable optimizations |
--enable-opt=level same as gcc -O switch |
|
Some influential environment variables: |
CC C compiler command |
CFLAGS C compiler flags |
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a |
nonstandard directory <lib dir> |
CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have |
headers in a nonstandard directory <include dir> |
CPP C preprocessor |
|
Use these variables to override the choices made by `configure' or to help |
it to find libraries and programs with nonstandard names/locations. |
|
_ACEOF |
fi |
|
if test "$ac_init_help" = "recursive"; then |
# If there are subdirs, report their specific --help. |
ac_popdir=`pwd` |
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue |
test -d $ac_dir || continue |
ac_builddir=. |
|
if test "$ac_dir" != .; then |
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
# A "../" for each directory in $ac_dir_suffix. |
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
else |
ac_dir_suffix= ac_top_builddir= |
fi |
|
case $srcdir in |
.) # No --srcdir option. We are building in place. |
ac_srcdir=. |
if test -z "$ac_top_builddir"; then |
ac_top_srcdir=. |
else |
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
fi ;; |
[\\/]* | ?:[\\/]* ) # Absolute path. |
ac_srcdir=$srcdir$ac_dir_suffix; |
ac_top_srcdir=$srcdir ;; |
*) # Relative path. |
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
ac_top_srcdir=$ac_top_builddir$srcdir ;; |
esac |
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be |
# absolute. |
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` |
ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` |
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` |
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` |
|
cd $ac_dir |
# Check for guested configure; otherwise get Cygnus style configure. |
if test -f $ac_srcdir/configure.gnu; then |
echo |
$SHELL $ac_srcdir/configure.gnu --help=recursive |
elif test -f $ac_srcdir/configure; then |
echo |
$SHELL $ac_srcdir/configure --help=recursive |
elif test -f $ac_srcdir/configure.ac || |
test -f $ac_srcdir/configure.in; then |
echo |
$ac_configure --help |
else |
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 |
fi |
cd $ac_popdir |
done |
fi |
|
test -n "$ac_init_help" && exit 0 |
if $ac_init_version; then |
cat <<\_ACEOF |
|
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 |
Free Software Foundation, Inc. |
This configure script is free software; the Free Software Foundation |
gives unlimited permission to copy, distribute and modify it. |
_ACEOF |
exit 0 |
fi |
exec 5>config.log |
cat >&5 <<_ACEOF |
This file contains any messages produced by compilers while |
running configure, to aid debugging if configure makes a mistake. |
|
It was created by $as_me, which was |
generated by GNU Autoconf 2.57. Invocation command line was |
|
$ $0 $@ |
|
_ACEOF |
{ |
cat <<_ASUNAME |
## --------- ## |
## Platform. ## |
## --------- ## |
|
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` |
uname -m = `(uname -m) 2>/dev/null || echo unknown` |
uname -r = `(uname -r) 2>/dev/null || echo unknown` |
uname -s = `(uname -s) 2>/dev/null || echo unknown` |
uname -v = `(uname -v) 2>/dev/null || echo unknown` |
|
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` |
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` |
|
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` |
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` |
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` |
hostinfo = `(hostinfo) 2>/dev/null || echo unknown` |
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` |
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` |
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` |
|
_ASUNAME |
|
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
echo "PATH: $as_dir" |
done |
|
} >&5 |
|
cat >&5 <<_ACEOF |
|
|
## ----------- ## |
## Core tests. ## |
## ----------- ## |
|
_ACEOF |
|
|
# Keep a trace of the command line. |
# Strip out --no-create and --no-recursion so they do not pile up. |
# Strip out --silent because we don't want to record it for future runs. |
# Also quote any args containing shell meta-characters. |
# Make two passes to allow for proper duplicate-argument suppression. |
ac_configure_args= |
ac_configure_args0= |
ac_configure_args1= |
ac_sep= |
ac_must_keep_next=false |
for ac_pass in 1 2 |
do |
for ac_arg |
do |
case $ac_arg in |
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; |
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil) |
continue ;; |
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; |
esac |
case $ac_pass in |
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; |
2) |
ac_configure_args1="$ac_configure_args1 '$ac_arg'" |
if test $ac_must_keep_next = true; then |
ac_must_keep_next=false # Got value, back to normal. |
else |
case $ac_arg in |
*=* | --config-cache | -C | -disable-* | --disable-* \ |
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ |
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ |
| -with-* | --with-* | -without-* | --without-* | --x) |
case "$ac_configure_args0 " in |
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;; |
esac |
;; |
-* ) ac_must_keep_next=true ;; |
esac |
fi |
ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" |
# Get rid of the leading space. |
ac_sep=" " |
;; |
esac |
done |
done |
$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } |
$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } |
|
# When interrupted or exit'd, cleanup temporary files, and complete |
# config.log. We remove comments because anyway the quotes in there |
# would cause problems or look ugly. |
# WARNING: Be sure not to use single quotes in there, as some shells, |
# such as our DU 5.0 friend, will then `close' the trap. |
trap 'exit_status=$? |
# Save into config.log some information that might help in debugging. |
{ |
echo |
|
cat <<\_ASBOX |
## ---------------- ## |
## Cache variables. ## |
## ---------------- ## |
_ASBOX |
echo |
# The following way of writing the cache mishandles newlines in values, |
{ |
(set) 2>&1 | |
case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in |
*ac_space=\ *) |
sed -n \ |
"s/'"'"'/'"'"'\\\\'"'"''"'"'/g; |
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" |
;; |
*) |
sed -n \ |
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
;; |
esac; |
} |
echo |
|
cat <<\_ASBOX |
## ----------------- ## |
## Output variables. ## |
## ----------------- ## |
_ASBOX |
echo |
for ac_var in $ac_subst_vars |
do |
eval ac_val=$`echo $ac_var` |
echo "$ac_var='"'"'$ac_val'"'"'" |
done | sort |
echo |
|
if test -n "$ac_subst_files"; then |
cat <<\_ASBOX |
## ------------- ## |
## Output files. ## |
## ------------- ## |
_ASBOX |
echo |
for ac_var in $ac_subst_files |
do |
eval ac_val=$`echo $ac_var` |
echo "$ac_var='"'"'$ac_val'"'"'" |
done | sort |
echo |
fi |
|
if test -s confdefs.h; then |
cat <<\_ASBOX |
## ----------- ## |
## confdefs.h. ## |
## ----------- ## |
_ASBOX |
echo |
sed "/^$/d" confdefs.h | sort |
echo |
fi |
test "$ac_signal" != 0 && |
echo "$as_me: caught signal $ac_signal" |
echo "$as_me: exit $exit_status" |
} >&5 |
rm -f core core.* *.core && |
rm -rf conftest* confdefs* conf$$* $ac_clean_files && |
exit $exit_status |
' 0 |
for ac_signal in 1 2 13 15; do |
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal |
done |
ac_signal=0 |
|
# confdefs.h avoids OS command line length limits that DEFS can exceed. |
rm -rf conftest* confdefs.h |
# AIX cpp loses on an empty file, so make sure it contains at least a newline. |
echo >confdefs.h |
|
# Predefined preprocessor variables. |
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_NAME "$PACKAGE_NAME" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_TARNAME "$PACKAGE_TARNAME" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_VERSION "$PACKAGE_VERSION" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_STRING "$PACKAGE_STRING" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" |
_ACEOF |
|
|
# Let the site file select an alternate cache file if it wants to. |
# Prefer explicitly selected file to automatically selected ones. |
if test -z "$CONFIG_SITE"; then |
if test "x$prefix" != xNONE; then |
CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" |
else |
CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" |
fi |
fi |
for ac_site_file in $CONFIG_SITE; do |
if test -r "$ac_site_file"; then |
{ echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 |
echo "$as_me: loading site script $ac_site_file" >&6;} |
sed 's/^/| /' "$ac_site_file" >&5 |
. "$ac_site_file" |
fi |
done |
|
if test -r "$cache_file"; then |
# Some versions of bash will fail to source /dev/null (special |
# files actually), so we avoid doing that. |
if test -f "$cache_file"; then |
{ echo "$as_me:$LINENO: loading cache $cache_file" >&5 |
echo "$as_me: loading cache $cache_file" >&6;} |
case $cache_file in |
[\\/]* | ?:[\\/]* ) . $cache_file;; |
*) . ./$cache_file;; |
esac |
fi |
else |
{ echo "$as_me:$LINENO: creating cache $cache_file" >&5 |
echo "$as_me: creating cache $cache_file" >&6;} |
>$cache_file |
fi |
|
# Check that the precious variables saved in the cache have kept the same |
# value. |
ac_cache_corrupted=false |
for ac_var in `(set) 2>&1 | |
sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do |
eval ac_old_set=\$ac_cv_env_${ac_var}_set |
eval ac_new_set=\$ac_env_${ac_var}_set |
eval ac_old_val="\$ac_cv_env_${ac_var}_value" |
eval ac_new_val="\$ac_env_${ac_var}_value" |
case $ac_old_set,$ac_new_set in |
set,) |
{ echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 |
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} |
ac_cache_corrupted=: ;; |
,set) |
{ echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 |
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} |
ac_cache_corrupted=: ;; |
,);; |
*) |
if test "x$ac_old_val" != "x$ac_new_val"; then |
{ echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 |
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} |
{ echo "$as_me:$LINENO: former value: $ac_old_val" >&5 |
echo "$as_me: former value: $ac_old_val" >&2;} |
{ echo "$as_me:$LINENO: current value: $ac_new_val" >&5 |
echo "$as_me: current value: $ac_new_val" >&2;} |
ac_cache_corrupted=: |
fi;; |
esac |
# Pass precious variables to config.status. |
if test "$ac_new_set" = set; then |
case $ac_new_val in |
*" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) |
ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; |
*) ac_arg=$ac_var=$ac_new_val ;; |
esac |
case " $ac_configure_args " in |
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. |
*) ac_configure_args="$ac_configure_args '$ac_arg'" ;; |
esac |
fi |
done |
if $ac_cache_corrupted; then |
{ echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 |
echo "$as_me: error: changes in the environment can compromise the build" >&2;} |
{ { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 |
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ac_aux_dir= |
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do |
if test -f $ac_dir/install-sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install-sh -c" |
break |
elif test -f $ac_dir/install.sh; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/install.sh -c" |
break |
elif test -f $ac_dir/shtool; then |
ac_aux_dir=$ac_dir |
ac_install_sh="$ac_aux_dir/shtool install -c" |
break |
fi |
done |
if test -z "$ac_aux_dir"; then |
{ { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 |
echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
ac_config_guess="$SHELL $ac_aux_dir/config.guess" |
ac_config_sub="$SHELL $ac_aux_dir/config.sub" |
ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. |
|
# Make sure we can run config.sub. |
$ac_config_sub sun4 >/dev/null 2>&1 || |
{ { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 |
echo "$as_me: error: cannot run $ac_config_sub" >&2;} |
{ (exit 1); exit 1; }; } |
|
echo "$as_me:$LINENO: checking build system type" >&5 |
echo $ECHO_N "checking build system type... $ECHO_C" >&6 |
if test "${ac_cv_build+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_cv_build_alias=$build_alias |
test -z "$ac_cv_build_alias" && |
ac_cv_build_alias=`$ac_config_guess` |
test -z "$ac_cv_build_alias" && |
{ { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 |
echo "$as_me: error: cannot guess build type; you must specify one" >&2;} |
{ (exit 1); exit 1; }; } |
ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || |
{ { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 |
echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} |
{ (exit 1); exit 1; }; } |
|
fi |
echo "$as_me:$LINENO: result: $ac_cv_build" >&5 |
echo "${ECHO_T}$ac_cv_build" >&6 |
build=$ac_cv_build |
build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
|
|
echo "$as_me:$LINENO: checking host system type" >&5 |
echo $ECHO_N "checking host system type... $ECHO_C" >&6 |
if test "${ac_cv_host+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_cv_host_alias=$host_alias |
test -z "$ac_cv_host_alias" && |
ac_cv_host_alias=$ac_cv_build_alias |
ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || |
{ { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 |
echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} |
{ (exit 1); exit 1; }; } |
|
fi |
echo "$as_me:$LINENO: result: $ac_cv_host" >&5 |
echo "${ECHO_T}$ac_cv_host" >&6 |
host=$ac_cv_host |
host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` |
host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` |
host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` |
|
|
am__api_version="1.6" |
# Find a good install program. We prefer a C program (faster), |
# so one script is as good as another. But avoid the broken or |
# incompatible versions: |
# SysV /etc/install, /usr/sbin/install |
# SunOS /usr/etc/install |
# IRIX /sbin/install |
# AIX /bin/install |
# AmigaOS /C/install, which installs bootblocks on floppy discs |
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
# ./install, which can be erroneously created by make from ./install.sh. |
echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
if test -z "$INSTALL"; then |
if test "${ac_cv_path_install+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
# Account for people who put trailing slashes in PATH elements. |
case $as_dir/ in |
./ | .// | /cC/* | \ |
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
/usr/ucb/* ) ;; |
*) |
# OSF1 and SCO ODT 3.0 have their own names for install. |
# Don't use installbsd from OSF since it installs stuff as root |
# by default. |
for ac_prog in ginstall scoinst install; do |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
if test $ac_prog = install && |
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# AIX install. It has an incompatible calling convention. |
: |
elif test $ac_prog = install && |
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# program-specific install script used by HP pwplus--don't use. |
: |
else |
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
break 3 |
fi |
fi |
done |
done |
;; |
esac |
done |
|
|
fi |
if test "${ac_cv_path_install+set}" = set; then |
INSTALL=$ac_cv_path_install |
else |
# As a last resort, use the slow shell script. We don't cache a |
# path for INSTALL within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the path is relative. |
INSTALL=$ac_install_sh |
fi |
fi |
echo "$as_me:$LINENO: result: $INSTALL" >&5 |
echo "${ECHO_T}$INSTALL" >&6 |
|
# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
# It thinks the first close brace ends the variable substitution. |
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
|
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
|
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
|
echo "$as_me:$LINENO: checking whether build environment is sane" >&5 |
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 |
# Just in case |
sleep 1 |
echo timestamp > conftest.file |
# Do `set' in a subshell so we don't clobber the current shell's |
# arguments. Must try -L first in case configure is actually a |
# symlink; some systems play weird games with the mod time of symlinks |
# (eg FreeBSD returns the mod time of the symlink's containing |
# directory). |
if ( |
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` |
if test "$*" = "X"; then |
# -L didn't work. |
set X `ls -t $srcdir/configure conftest.file` |
fi |
rm -f conftest.file |
if test "$*" != "X $srcdir/configure conftest.file" \ |
&& test "$*" != "X conftest.file $srcdir/configure"; then |
|
# If neither matched, then we have a broken ls. This can happen |
# if, for instance, CONFIG_SHELL is bash and it inherits a |
# broken ls alias from the environment. This has actually |
# happened. Such a system could not be considered "sane". |
{ { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken |
alias in your environment" >&5 |
echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken |
alias in your environment" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
test "$2" = conftest.file |
) |
then |
# Ok. |
: |
else |
{ { echo "$as_me:$LINENO: error: newly created file is older than distributed files! |
Check your system clock" >&5 |
echo "$as_me: error: newly created file is older than distributed files! |
Check your system clock" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
echo "$as_me:$LINENO: result: yes" >&5 |
echo "${ECHO_T}yes" >&6 |
test "$program_prefix" != NONE && |
program_transform_name="s,^,$program_prefix,;$program_transform_name" |
# Use a double $ so make ignores it. |
test "$program_suffix" != NONE && |
program_transform_name="s,\$,$program_suffix,;$program_transform_name" |
# Double any \ or $. echo might interpret backslashes. |
# By default was `s,x,x', remove it if useless. |
cat <<\_ACEOF >conftest.sed |
s/[\\$]/&&/g;s/;s,x,x,$// |
_ACEOF |
program_transform_name=`echo $program_transform_name | sed -f conftest.sed` |
rm conftest.sed |
|
|
# expand $ac_aux_dir to an absolute path |
am_aux_dir=`cd $ac_aux_dir && pwd` |
|
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" |
# Use eval to expand $SHELL |
if eval "$MISSING --run true"; then |
am_missing_run="$MISSING --run " |
else |
am_missing_run= |
{ echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 |
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} |
fi |
|
for ac_prog in gawk mawk nawk awk |
do |
# Extract the first word of "$ac_prog", so it can be a program name with args. |
set dummy $ac_prog; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_AWK+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$AWK"; then |
ac_cv_prog_AWK="$AWK" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_AWK="$ac_prog" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
AWK=$ac_cv_prog_AWK |
if test -n "$AWK"; then |
echo "$as_me:$LINENO: result: $AWK" >&5 |
echo "${ECHO_T}$AWK" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
test -n "$AWK" && break |
done |
|
echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 |
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` |
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.make <<\_ACEOF |
all: |
@echo 'ac_maketemp="$(MAKE)"' |
_ACEOF |
# GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` |
if test -n "$ac_maketemp"; then |
eval ac_cv_prog_make_${ac_make}_set=yes |
else |
eval ac_cv_prog_make_${ac_make}_set=no |
fi |
rm -f conftest.make |
fi |
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then |
echo "$as_me:$LINENO: result: yes" >&5 |
echo "${ECHO_T}yes" >&6 |
SET_MAKE= |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
SET_MAKE="MAKE=${MAKE-make}" |
fi |
|
# test to see if srcdir already configured |
if test "`cd $srcdir && pwd`" != "`pwd`" && |
test -f $srcdir/config.status; then |
{ { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 |
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
# Define the identity of the package. |
PACKAGE=or1ksimtest |
VERSION=1.3 |
|
|
cat >>confdefs.h <<_ACEOF |
#define PACKAGE "$PACKAGE" |
_ACEOF |
|
|
cat >>confdefs.h <<_ACEOF |
#define VERSION "$VERSION" |
_ACEOF |
|
# Some tools Automake needs. |
|
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} |
|
|
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} |
|
|
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} |
|
|
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} |
|
|
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} |
|
|
AMTAR=${AMTAR-"${am_missing_run}tar"} |
|
install_sh=${install_sh-"$am_aux_dir/install-sh"} |
|
# Installed binaries are usually stripped using `strip' when the user |
# run `make install-strip'. However `strip' might not be the right |
# tool to use in cross-compilation environments, therefore Automake |
# will honor the `STRIP' environment variable to overrule this program. |
if test "$cross_compiling" != no; then |
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. |
set dummy ${ac_tool_prefix}strip; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_STRIP+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$STRIP"; then |
ac_cv_prog_STRIP="$STRIP" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_STRIP="${ac_tool_prefix}strip" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
STRIP=$ac_cv_prog_STRIP |
if test -n "$STRIP"; then |
echo "$as_me:$LINENO: result: $STRIP" >&5 |
echo "${ECHO_T}$STRIP" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_STRIP"; then |
ac_ct_STRIP=$STRIP |
# Extract the first word of "strip", so it can be a program name with args. |
set dummy strip; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_STRIP"; then |
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_STRIP="strip" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" |
fi |
fi |
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP |
if test -n "$ac_ct_STRIP"; then |
echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 |
echo "${ECHO_T}$ac_ct_STRIP" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
STRIP=$ac_ct_STRIP |
else |
STRIP="$ac_cv_prog_STRIP" |
fi |
|
fi |
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" |
|
# We need awk for the "check" target. The system "awk" is bad on |
# some platforms. |
|
|
|
|
echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 |
echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 |
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,./+-,__p_,'` |
if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.make <<\_ACEOF |
all: |
@echo 'ac_maketemp="$(MAKE)"' |
_ACEOF |
# GNU make sometimes prints "make[1]: Entering...", which would confuse us. |
eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` |
if test -n "$ac_maketemp"; then |
eval ac_cv_prog_make_${ac_make}_set=yes |
else |
eval ac_cv_prog_make_${ac_make}_set=no |
fi |
rm -f conftest.make |
fi |
if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then |
echo "$as_me:$LINENO: result: yes" >&5 |
echo "${ECHO_T}yes" >&6 |
SET_MAKE= |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
SET_MAKE="MAKE=${MAKE-make}" |
fi |
|
# Find a good install program. We prefer a C program (faster), |
# so one script is as good as another. But avoid the broken or |
# incompatible versions: |
# SysV /etc/install, /usr/sbin/install |
# SunOS /usr/etc/install |
# IRIX /sbin/install |
# AIX /bin/install |
# AmigaOS /C/install, which installs bootblocks on floppy discs |
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag |
# AFS /usr/afsws/bin/install, which mishandles nonexistent args |
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" |
# ./install, which can be erroneously created by make from ./install.sh. |
echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 |
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 |
if test -z "$INSTALL"; then |
if test "${ac_cv_path_install+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
# Account for people who put trailing slashes in PATH elements. |
case $as_dir/ in |
./ | .// | /cC/* | \ |
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ |
/usr/ucb/* ) ;; |
*) |
# OSF1 and SCO ODT 3.0 have their own names for install. |
# Don't use installbsd from OSF since it installs stuff as root |
# by default. |
for ac_prog in ginstall scoinst install; do |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then |
if test $ac_prog = install && |
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# AIX install. It has an incompatible calling convention. |
: |
elif test $ac_prog = install && |
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then |
# program-specific install script used by HP pwplus--don't use. |
: |
else |
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" |
break 3 |
fi |
fi |
done |
done |
;; |
esac |
done |
|
|
fi |
if test "${ac_cv_path_install+set}" = set; then |
INSTALL=$ac_cv_path_install |
else |
# As a last resort, use the slow shell script. We don't cache a |
# path for INSTALL within a source directory, because that will |
# break other packages using the cache if that directory is |
# removed, or if the path is relative. |
INSTALL=$ac_install_sh |
fi |
fi |
echo "$as_me:$LINENO: result: $INSTALL" >&5 |
echo "${ECHO_T}$INSTALL" >&6 |
|
# Use test -z because SunOS4 sh mishandles braces in ${var-val}. |
# It thinks the first close brace ends the variable substitution. |
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' |
|
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' |
|
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}$target-gcc", so it can be a program name with args. |
set dummy ${ac_tool_prefix}$target-gcc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_CC="${ac_tool_prefix}$target-gcc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
echo "$as_me:$LINENO: result: $CC" >&5 |
echo "${ECHO_T}$CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_CC"; then |
ac_ct_CC=$CC |
# Extract the first word of "$target-gcc", so it can be a program name with args. |
set dummy $target-gcc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_CC"; then |
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_CC="$target-gcc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
test -z "$ac_cv_prog_ac_ct_CC" && ac_cv_prog_ac_ct_CC="cc" |
fi |
fi |
ac_ct_CC=$ac_cv_prog_ac_ct_CC |
if test -n "$ac_ct_CC"; then |
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
echo "${ECHO_T}$ac_ct_CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
CC=$ac_ct_CC |
else |
CC="$ac_cv_prog_CC" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}$target-ranlib", so it can be a program name with args. |
set dummy ${ac_tool_prefix}$target-ranlib; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_RANLIB+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$RANLIB"; then |
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_RANLIB="${ac_tool_prefix}$target-ranlib" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
RANLIB=$ac_cv_prog_RANLIB |
if test -n "$RANLIB"; then |
echo "$as_me:$LINENO: result: $RANLIB" >&5 |
echo "${ECHO_T}$RANLIB" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_RANLIB"; then |
ac_ct_RANLIB=$RANLIB |
# Extract the first word of "$target-ranlib", so it can be a program name with args. |
set dummy $target-ranlib; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_RANLIB"; then |
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_RANLIB="$target-ranlib" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB="ranlib" |
fi |
fi |
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB |
if test -n "$ac_ct_RANLIB"; then |
echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 |
echo "${ECHO_T}$ac_ct_RANLIB" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
RANLIB=$ac_ct_RANLIB |
else |
RANLIB="$ac_cv_prog_RANLIB" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}$target-ld", so it can be a program name with args. |
set dummy ${ac_tool_prefix}$target-ld; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_LD+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$LD"; then |
ac_cv_prog_LD="$LD" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_LD="${ac_tool_prefix}$target-ld" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
LD=$ac_cv_prog_LD |
if test -n "$LD"; then |
echo "$as_me:$LINENO: result: $LD" >&5 |
echo "${ECHO_T}$LD" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_LD"; then |
ac_ct_LD=$LD |
# Extract the first word of "$target-ld", so it can be a program name with args. |
set dummy $target-ld; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_LD+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_LD"; then |
ac_cv_prog_ac_ct_LD="$ac_ct_LD" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_LD="$target-ld" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
test -z "$ac_cv_prog_ac_ct_LD" && ac_cv_prog_ac_ct_LD="ld" |
fi |
fi |
ac_ct_LD=$ac_cv_prog_ac_ct_LD |
if test -n "$ac_ct_LD"; then |
echo "$as_me:$LINENO: result: $ac_ct_LD" >&5 |
echo "${ECHO_T}$ac_ct_LD" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
LD=$ac_ct_LD |
else |
LD="$ac_cv_prog_LD" |
fi |
|
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}$target-sim", so it can be a program name with args. |
set dummy ${ac_tool_prefix}$target-sim; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_SIM+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$SIM"; then |
ac_cv_prog_SIM="$SIM" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_SIM="${ac_tool_prefix}$target-sim" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
SIM=$ac_cv_prog_SIM |
if test -n "$SIM"; then |
echo "$as_me:$LINENO: result: $SIM" >&5 |
echo "${ECHO_T}$SIM" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_SIM"; then |
ac_ct_SIM=$SIM |
# Extract the first word of "$target-sim", so it can be a program name with args. |
set dummy $target-sim; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_SIM+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_SIM"; then |
ac_cv_prog_ac_ct_SIM="$ac_ct_SIM" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_SIM="$target-sim" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
test -z "$ac_cv_prog_ac_ct_SIM" && ac_cv_prog_ac_ct_SIM="sim" |
fi |
fi |
ac_ct_SIM=$ac_cv_prog_ac_ct_SIM |
if test -n "$ac_ct_SIM"; then |
echo "$as_me:$LINENO: result: $ac_ct_SIM" >&5 |
echo "${ECHO_T}$ac_ct_SIM" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
SIM=$ac_ct_SIM |
else |
SIM="$ac_cv_prog_SIM" |
fi |
|
rm -f .deps 2>/dev/null |
mkdir .deps 2>/dev/null |
if test -d .deps; then |
DEPDIR=.deps |
else |
# MS-DOS does not allow filenames that begin with a dot. |
DEPDIR=_deps |
fi |
rmdir .deps 2>/dev/null |
|
|
ac_config_commands="$ac_config_commands depfiles" |
|
|
am_make=${MAKE-make} |
cat > confinc << 'END' |
doit: |
@echo done |
END |
# If we don't find an include directive, just comment out the code. |
echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 |
echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6 |
am__include="#" |
am__quote= |
_am_result=none |
# First try GNU make style include. |
echo "include confinc" > confmf |
# We grep out `Entering directory' and `Leaving directory' |
# messages which can occur if `w' ends up in MAKEFLAGS. |
# In particular we don't look at `^make:' because GNU make might |
# be invoked under some other name (usually "gmake"), in which |
# case it prints its new name instead of `make'. |
if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then |
am__include=include |
am__quote= |
_am_result=GNU |
fi |
# Now try BSD make style include. |
if test "$am__include" = "#"; then |
echo '.include "confinc"' > confmf |
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then |
am__include=.include |
am__quote="\"" |
_am_result=BSD |
fi |
fi |
|
|
echo "$as_me:$LINENO: result: $_am_result" >&5 |
echo "${ECHO_T}$_am_result" >&6 |
rm -f confinc confmf |
|
# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given. |
if test "${enable_dependency_tracking+set}" = set; then |
enableval="$enable_dependency_tracking" |
|
fi; |
if test "x$enable_dependency_tracking" != xno; then |
am_depcomp="$ac_aux_dir/depcomp" |
AMDEPBACKSLASH='\' |
fi |
|
|
if test "x$enable_dependency_tracking" != xno; then |
AMDEP_TRUE= |
AMDEP_FALSE='#' |
else |
AMDEP_TRUE='#' |
AMDEP_FALSE= |
fi |
|
|
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. |
set dummy ${ac_tool_prefix}gcc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_CC="${ac_tool_prefix}gcc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
echo "$as_me:$LINENO: result: $CC" >&5 |
echo "${ECHO_T}$CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_CC"; then |
ac_ct_CC=$CC |
# Extract the first word of "gcc", so it can be a program name with args. |
set dummy gcc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_CC"; then |
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_CC="gcc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
ac_ct_CC=$ac_cv_prog_ac_ct_CC |
if test -n "$ac_ct_CC"; then |
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
echo "${ECHO_T}$ac_ct_CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
CC=$ac_ct_CC |
else |
CC="$ac_cv_prog_CC" |
fi |
|
if test -z "$CC"; then |
if test -n "$ac_tool_prefix"; then |
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. |
set dummy ${ac_tool_prefix}cc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_CC="${ac_tool_prefix}cc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
echo "$as_me:$LINENO: result: $CC" >&5 |
echo "${ECHO_T}$CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$ac_cv_prog_CC"; then |
ac_ct_CC=$CC |
# Extract the first word of "cc", so it can be a program name with args. |
set dummy cc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_CC"; then |
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_CC="cc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
ac_ct_CC=$ac_cv_prog_ac_ct_CC |
if test -n "$ac_ct_CC"; then |
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
echo "${ECHO_T}$ac_ct_CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
CC=$ac_ct_CC |
else |
CC="$ac_cv_prog_CC" |
fi |
|
fi |
if test -z "$CC"; then |
# Extract the first word of "cc", so it can be a program name with args. |
set dummy cc; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
ac_prog_rejected=no |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then |
ac_prog_rejected=yes |
continue |
fi |
ac_cv_prog_CC="cc" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
if test $ac_prog_rejected = yes; then |
# We found a bogon in the path, so make sure we never use it. |
set dummy $ac_cv_prog_CC |
shift |
if test $# != 0; then |
# We chose a different compiler from the bogus one. |
# However, it has the same basename, so the bogon will be chosen |
# first if we set CC to just the basename; use the full file name. |
shift |
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" |
fi |
fi |
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
echo "$as_me:$LINENO: result: $CC" >&5 |
echo "${ECHO_T}$CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
fi |
if test -z "$CC"; then |
if test -n "$ac_tool_prefix"; then |
for ac_prog in cl |
do |
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. |
set dummy $ac_tool_prefix$ac_prog; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$CC"; then |
ac_cv_prog_CC="$CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_CC="$ac_tool_prefix$ac_prog" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
CC=$ac_cv_prog_CC |
if test -n "$CC"; then |
echo "$as_me:$LINENO: result: $CC" >&5 |
echo "${ECHO_T}$CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
test -n "$CC" && break |
done |
fi |
if test -z "$CC"; then |
ac_ct_CC=$CC |
for ac_prog in cl |
do |
# Extract the first word of "$ac_prog", so it can be a program name with args. |
set dummy $ac_prog; ac_word=$2 |
echo "$as_me:$LINENO: checking for $ac_word" >&5 |
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 |
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -n "$ac_ct_CC"; then |
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. |
else |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for ac_exec_ext in '' $ac_executable_extensions; do |
if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then |
ac_cv_prog_ac_ct_CC="$ac_prog" |
echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 |
break 2 |
fi |
done |
done |
|
fi |
fi |
ac_ct_CC=$ac_cv_prog_ac_ct_CC |
if test -n "$ac_ct_CC"; then |
echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 |
echo "${ECHO_T}$ac_ct_CC" >&6 |
else |
echo "$as_me:$LINENO: result: no" >&5 |
echo "${ECHO_T}no" >&6 |
fi |
|
test -n "$ac_ct_CC" && break |
done |
|
CC=$ac_ct_CC |
fi |
|
fi |
|
|
test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH |
See \`config.log' for more details." >&5 |
echo "$as_me: error: no acceptable C compiler found in \$PATH |
See \`config.log' for more details." >&2;} |
{ (exit 1); exit 1; }; } |
|
# Provide some information about the compiler. |
echo "$as_me:$LINENO:" \ |
"checking for C compiler version" >&5 |
ac_compiler=`set X $ac_compile; echo $2` |
{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5 |
(eval $ac_compiler --version </dev/null >&5) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } |
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5 |
(eval $ac_compiler -v </dev/null >&5) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } |
{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5 |
(eval $ac_compiler -V </dev/null >&5) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } |
|
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
ac_clean_files_save=$ac_clean_files |
ac_clean_files="$ac_clean_files a.out a.exe b.out" |
# Try to create an executable without -o first, disregard a.out. |
# It will help us diagnose broken compilers, and finding out an intuition |
# of exeext. |
echo "$as_me:$LINENO: checking for C compiler default output" >&5 |
echo $ECHO_N "checking for C compiler default output... $ECHO_C" >&6 |
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` |
if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 |
(eval $ac_link_default) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; then |
# Find the output, starting from the most likely. This scheme is |
# not robust to junk in `.', hence go to wildcards (a.*) only as a last |
# resort. |
|
# Be careful to initialize this variable, since it used to be cached. |
# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. |
ac_cv_exeext= |
# b.out is created by i960 compilers. |
for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out |
do |
test -f "$ac_file" || continue |
case $ac_file in |
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) |
;; |
conftest.$ac_ext ) |
# This is the source file. |
;; |
[ab].out ) |
# We found the default executable, but exeext='' is most |
# certainly right. |
break;; |
*.* ) |
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
# FIXME: I believe we export ac_cv_exeext for Libtool, |
# but it would be cool to find out if it's true. Does anybody |
# maintain Libtool? --akim. |
export ac_cv_exeext |
break;; |
* ) |
break;; |
esac |
done |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
{ { echo "$as_me:$LINENO: error: C compiler cannot create executables |
See \`config.log' for more details." >&5 |
echo "$as_me: error: C compiler cannot create executables |
See \`config.log' for more details." >&2;} |
{ (exit 77); exit 77; }; } |
fi |
|
ac_exeext=$ac_cv_exeext |
echo "$as_me:$LINENO: result: $ac_file" >&5 |
echo "${ECHO_T}$ac_file" >&6 |
|
# Check the compiler produces executables we can run. If not, either |
# the compiler is broken, or we cross compile. |
echo "$as_me:$LINENO: checking whether the C compiler works" >&5 |
echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 |
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 |
# If not cross compiling, check that we can run a simple program. |
if test "$cross_compiling" != yes; then |
if { ac_try='./$ac_file' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
cross_compiling=no |
else |
if test "$cross_compiling" = maybe; then |
cross_compiling=yes |
else |
{ { echo "$as_me:$LINENO: error: cannot run C compiled programs. |
If you meant to cross compile, use \`--host'. |
See \`config.log' for more details." >&5 |
echo "$as_me: error: cannot run C compiled programs. |
If you meant to cross compile, use \`--host'. |
See \`config.log' for more details." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
fi |
fi |
echo "$as_me:$LINENO: result: yes" >&5 |
echo "${ECHO_T}yes" >&6 |
|
rm -f a.out a.exe conftest$ac_cv_exeext b.out |
ac_clean_files=$ac_clean_files_save |
# Check the compiler produces executables we can run. If not, either |
# the compiler is broken, or we cross compile. |
echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 |
echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 |
echo "$as_me:$LINENO: result: $cross_compiling" >&5 |
echo "${ECHO_T}$cross_compiling" >&6 |
|
echo "$as_me:$LINENO: checking for suffix of executables" >&5 |
echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 |
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; then |
# If both `conftest.exe' and `conftest' are `present' (well, observable) |
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will |
# work properly (i.e., refer to `conftest.exe'), while it won't with |
# `rm'. |
for ac_file in conftest.exe conftest conftest.*; do |
test -f "$ac_file" || continue |
case $ac_file in |
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; |
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` |
export ac_cv_exeext |
break;; |
* ) break;; |
esac |
done |
else |
{ { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link |
See \`config.log' for more details." >&5 |
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link |
See \`config.log' for more details." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
rm -f conftest$ac_cv_exeext |
echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 |
echo "${ECHO_T}$ac_cv_exeext" >&6 |
|
rm -f conftest.$ac_ext |
EXEEXT=$ac_cv_exeext |
ac_exeext=$EXEEXT |
echo "$as_me:$LINENO: checking for suffix of object files" >&5 |
echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 |
if test "${ac_cv_objext+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.o conftest.obj |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; then |
for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do |
case $ac_file in |
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; |
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` |
break;; |
esac |
done |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile |
See \`config.log' for more details." >&5 |
echo "$as_me: error: cannot compute suffix of object files: cannot compile |
See \`config.log' for more details." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
rm -f conftest.$ac_cv_objext conftest.$ac_ext |
fi |
echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 |
echo "${ECHO_T}$ac_cv_objext" >&6 |
OBJEXT=$ac_cv_objext |
ac_objext=$OBJEXT |
echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 |
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 |
if test "${ac_cv_c_compiler_gnu+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
#ifndef __GNUC__ |
choke me |
#endif |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_compiler_gnu=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_compiler_gnu=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
ac_cv_c_compiler_gnu=$ac_compiler_gnu |
|
fi |
echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 |
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 |
GCC=`test $ac_compiler_gnu = yes && echo yes` |
ac_test_CFLAGS=${CFLAGS+set} |
ac_save_CFLAGS=$CFLAGS |
CFLAGS="-g" |
echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 |
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 |
if test "${ac_cv_prog_cc_g+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_prog_cc_g=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_cv_prog_cc_g=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 |
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 |
if test "$ac_test_CFLAGS" = set; then |
CFLAGS=$ac_save_CFLAGS |
elif test $ac_cv_prog_cc_g = yes; then |
if test "$GCC" = yes; then |
CFLAGS="-g -O2" |
else |
CFLAGS="-g" |
fi |
else |
if test "$GCC" = yes; then |
CFLAGS="-O2" |
else |
CFLAGS= |
fi |
fi |
echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 |
echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 |
if test "${ac_cv_prog_cc_stdc+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_cv_prog_cc_stdc=no |
ac_save_CC=$CC |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <stdarg.h> |
#include <stdio.h> |
#include <sys/types.h> |
#include <sys/stat.h> |
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ |
struct buf { int x; }; |
FILE * (*rcsopen) (struct buf *, struct stat *, int); |
static char *e (p, i) |
char **p; |
int i; |
{ |
return p[i]; |
} |
static char *f (char * (*g) (char **, int), char **p, ...) |
{ |
char *s; |
va_list v; |
va_start (v,p); |
s = g (p, va_arg (v,int)); |
va_end (v); |
return s; |
} |
int test (int i, double x); |
struct s1 {int (*f) (int a);}; |
struct s2 {int (*f) (double a);}; |
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); |
int argc; |
char **argv; |
int |
main () |
{ |
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; |
; |
return 0; |
} |
_ACEOF |
# Don't try gcc -ansi; that turns off useful extensions and |
# breaks some systems' header files. |
# AIX -qlanglvl=ansi |
# Ultrix and OSF/1 -std1 |
# HP-UX 10.20 and later -Ae |
# HP-UX older versions -Aa -D_HPUX_SOURCE |
# SVR4 -Xc -D__EXTENSIONS__ |
for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" |
do |
CC="$ac_save_CC $ac_arg" |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_prog_cc_stdc=$ac_arg |
break |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
fi |
rm -f conftest.$ac_objext |
done |
rm -f conftest.$ac_ext conftest.$ac_objext |
CC=$ac_save_CC |
|
fi |
|
case "x$ac_cv_prog_cc_stdc" in |
x|xno) |
echo "$as_me:$LINENO: result: none needed" >&5 |
echo "${ECHO_T}none needed" >&6 ;; |
*) |
echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 |
echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 |
CC="$CC $ac_cv_prog_cc_stdc" ;; |
esac |
|
# Some people use a C++ compiler to compile C. Since we use `exit', |
# in C++ we need to declare it. In case someone uses the same compiler |
# for both compiling C and C++ we need to have the C++ compiler decide |
# the declaration of exit, since it's the most demanding environment. |
cat >conftest.$ac_ext <<_ACEOF |
#ifndef __cplusplus |
choke me |
#endif |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
for ac_declaration in \ |
''\ |
'#include <stdlib.h>' \ |
'extern "C" void std::exit (int) throw (); using std::exit;' \ |
'extern "C" void std::exit (int); using std::exit;' \ |
'extern "C" void exit (int) throw ();' \ |
'extern "C" void exit (int);' \ |
'void exit (int);' |
do |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <stdlib.h> |
$ac_declaration |
int |
main () |
{ |
exit (42); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
: |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
continue |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
$ac_declaration |
int |
main () |
{ |
exit (42); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
break |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
rm -f conftest* |
if test -n "$ac_declaration"; then |
echo '#ifdef __cplusplus' >>confdefs.h |
echo $ac_declaration >>confdefs.h |
echo '#endif' >>confdefs.h |
fi |
|
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
|
depcc="$CC" am_compiler_list= |
|
echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 |
echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6 |
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then |
# We make a subdir and do the tests there. Otherwise we can end up |
# making bogus files that we don't know about and never remove. For |
# instance it was reported that on HP-UX the gcc test will end up |
# making a dummy file named `D' -- because `-MD' means `put the output |
# in D'. |
mkdir conftest.dir |
# Copy depcomp to subdir because otherwise we won't find it if we're |
# using a relative directory. |
cp "$am_depcomp" conftest.dir |
cd conftest.dir |
|
am_cv_CC_dependencies_compiler_type=none |
if test "$am_compiler_list" = ""; then |
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` |
fi |
for depmode in $am_compiler_list; do |
# We need to recreate these files for each test, as the compiler may |
# overwrite some of them when testing with obscure command lines. |
# This happens at least with the AIX C compiler. |
echo '#include "conftest.h"' > conftest.c |
echo 'int i;' > conftest.h |
echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf |
|
case $depmode in |
nosideeffect) |
# after this tag, mechanisms are not by side-effect, so they'll |
# only be used when explicitly requested |
if test "x$enable_dependency_tracking" = xyes; then |
continue |
else |
break |
fi |
;; |
none) break ;; |
esac |
# We check with `-c' and `-o' for the sake of the "dashmstdout" |
# mode. It turns out that the SunPro C++ compiler does not properly |
# handle `-M -o', and we need to detect this. |
if depmode=$depmode \ |
source=conftest.c object=conftest.o \ |
depfile=conftest.Po tmpdepfile=conftest.TPo \ |
$SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && |
grep conftest.h conftest.Po > /dev/null 2>&1 && |
${MAKE-make} -s -f confmf > /dev/null 2>&1; then |
am_cv_CC_dependencies_compiler_type=$depmode |
break |
fi |
done |
|
cd .. |
rm -rf conftest.dir |
else |
am_cv_CC_dependencies_compiler_type=none |
fi |
|
fi |
echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 |
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6 |
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type |
|
|
|
|
echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5 |
echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6 |
if test "${ac_cv_lib_cposix_strerror+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_check_lib_save_LIBS=$LIBS |
LIBS="-lcposix $LIBS" |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
/* Override any gcc2 internal prototype to avoid an error. */ |
#ifdef __cplusplus |
extern "C" |
#endif |
/* We use char because int might match the return type of a gcc2 |
builtin and then its argument prototype would still apply. */ |
char strerror (); |
int |
main () |
{ |
strerror (); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext conftest$ac_exeext |
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest$ac_exeext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_lib_cposix_strerror=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_cv_lib_cposix_strerror=no |
fi |
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext |
LIBS=$ac_check_lib_save_LIBS |
fi |
echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5 |
echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6 |
if test $ac_cv_lib_cposix_strerror = yes; then |
LIBS="$LIBS -lcposix" |
fi |
|
|
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 |
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 |
# On Suns, sometimes $CPP names a directory. |
if test -n "$CPP" && test -d "$CPP"; then |
CPP= |
fi |
if test -z "$CPP"; then |
if test "${ac_cv_prog_CPP+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
# Double quotes because CPP needs to be expanded |
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" |
do |
ac_preproc_ok=false |
for ac_c_preproc_warn_flag in '' yes |
do |
# Use a header file that comes with gcc, so configuring glibc |
# with a fresh cross-compiler works. |
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since |
# <limits.h> exists even on freestanding compilers. |
# On the NeXT, cc -E runs the code through the compiler's parser, |
# not just through cpp. "Syntax error" is here to catch this case. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#ifdef __STDC__ |
# include <limits.h> |
#else |
# include <assert.h> |
#endif |
Syntax error |
_ACEOF |
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } >/dev/null; then |
if test -s conftest.err; then |
ac_cpp_err=$ac_c_preproc_warn_flag |
else |
ac_cpp_err= |
fi |
else |
ac_cpp_err=yes |
fi |
if test -z "$ac_cpp_err"; then |
: |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
# Broken: fails on valid input. |
continue |
fi |
rm -f conftest.err conftest.$ac_ext |
|
# OK, works on sane cases. Now check whether non-existent headers |
# can be detected and how. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <ac_nonexistent.h> |
_ACEOF |
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } >/dev/null; then |
if test -s conftest.err; then |
ac_cpp_err=$ac_c_preproc_warn_flag |
else |
ac_cpp_err= |
fi |
else |
ac_cpp_err=yes |
fi |
if test -z "$ac_cpp_err"; then |
# Broken: success on invalid input. |
continue |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
# Passes both tests. |
ac_preproc_ok=: |
break |
fi |
rm -f conftest.err conftest.$ac_ext |
|
done |
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. |
rm -f conftest.err conftest.$ac_ext |
if $ac_preproc_ok; then |
break |
fi |
|
done |
ac_cv_prog_CPP=$CPP |
|
fi |
CPP=$ac_cv_prog_CPP |
else |
ac_cv_prog_CPP=$CPP |
fi |
echo "$as_me:$LINENO: result: $CPP" >&5 |
echo "${ECHO_T}$CPP" >&6 |
ac_preproc_ok=false |
for ac_c_preproc_warn_flag in '' yes |
do |
# Use a header file that comes with gcc, so configuring glibc |
# with a fresh cross-compiler works. |
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since |
# <limits.h> exists even on freestanding compilers. |
# On the NeXT, cc -E runs the code through the compiler's parser, |
# not just through cpp. "Syntax error" is here to catch this case. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#ifdef __STDC__ |
# include <limits.h> |
#else |
# include <assert.h> |
#endif |
Syntax error |
_ACEOF |
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } >/dev/null; then |
if test -s conftest.err; then |
ac_cpp_err=$ac_c_preproc_warn_flag |
else |
ac_cpp_err= |
fi |
else |
ac_cpp_err=yes |
fi |
if test -z "$ac_cpp_err"; then |
: |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
# Broken: fails on valid input. |
continue |
fi |
rm -f conftest.err conftest.$ac_ext |
|
# OK, works on sane cases. Now check whether non-existent headers |
# can be detected and how. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <ac_nonexistent.h> |
_ACEOF |
if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 |
(eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 |
ac_status=$? |
grep -v '^ *+' conftest.er1 >conftest.err |
rm -f conftest.er1 |
cat conftest.err >&5 |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } >/dev/null; then |
if test -s conftest.err; then |
ac_cpp_err=$ac_c_preproc_warn_flag |
else |
ac_cpp_err= |
fi |
else |
ac_cpp_err=yes |
fi |
if test -z "$ac_cpp_err"; then |
# Broken: success on invalid input. |
continue |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
# Passes both tests. |
ac_preproc_ok=: |
break |
fi |
rm -f conftest.err conftest.$ac_ext |
|
done |
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. |
rm -f conftest.err conftest.$ac_ext |
if $ac_preproc_ok; then |
: |
else |
{ { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check |
See \`config.log' for more details." >&5 |
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check |
See \`config.log' for more details." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
ac_ext=c |
ac_cpp='$CPP $CPPFLAGS' |
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' |
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' |
ac_compiler_gnu=$ac_cv_c_compiler_gnu |
|
|
echo "$as_me:$LINENO: checking for egrep" >&5 |
echo $ECHO_N "checking for egrep... $ECHO_C" >&6 |
if test "${ac_cv_prog_egrep+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
if echo a | (grep -E '(a|b)') >/dev/null 2>&1 |
then ac_cv_prog_egrep='grep -E' |
else ac_cv_prog_egrep='egrep' |
fi |
fi |
echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 |
echo "${ECHO_T}$ac_cv_prog_egrep" >&6 |
EGREP=$ac_cv_prog_egrep |
|
|
echo "$as_me:$LINENO: checking for ANSI C header files" >&5 |
echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 |
if test "${ac_cv_header_stdc+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <stdlib.h> |
#include <stdarg.h> |
#include <string.h> |
#include <float.h> |
|
int |
main () |
{ |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_header_stdc=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_cv_header_stdc=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
|
if test $ac_cv_header_stdc = yes; then |
# SunOS 4.x string.h does not declare mem*, contrary to ANSI. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <string.h> |
|
_ACEOF |
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | |
$EGREP "memchr" >/dev/null 2>&1; then |
: |
else |
ac_cv_header_stdc=no |
fi |
rm -f conftest* |
|
fi |
|
if test $ac_cv_header_stdc = yes; then |
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <stdlib.h> |
|
_ACEOF |
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | |
$EGREP "free" >/dev/null 2>&1; then |
: |
else |
ac_cv_header_stdc=no |
fi |
rm -f conftest* |
|
fi |
|
if test $ac_cv_header_stdc = yes; then |
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. |
if test "$cross_compiling" = yes; then |
: |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <ctype.h> |
#if ((' ' & 0x0FF) == 0x020) |
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') |
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) |
#else |
# define ISLOWER(c) \ |
(('a' <= (c) && (c) <= 'i') \ |
|| ('j' <= (c) && (c) <= 'r') \ |
|| ('s' <= (c) && (c) <= 'z')) |
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) |
#endif |
|
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) |
int |
main () |
{ |
int i; |
for (i = 0; i < 256; i++) |
if (XOR (islower (i), ISLOWER (i)) |
|| toupper (i) != TOUPPER (i)) |
exit(2); |
exit (0); |
} |
_ACEOF |
rm -f conftest$ac_exeext |
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && { ac_try='./conftest$ac_exeext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
: |
else |
echo "$as_me: program exited with status $ac_status" >&5 |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
( exit $ac_status ) |
ac_cv_header_stdc=no |
fi |
rm -f core core.* *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext |
fi |
fi |
fi |
echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 |
echo "${ECHO_T}$ac_cv_header_stdc" >&6 |
if test $ac_cv_header_stdc = yes; then |
|
cat >>confdefs.h <<\_ACEOF |
#define STDC_HEADERS 1 |
_ACEOF |
|
fi |
|
|
# By default we simply use the C compiler to build assembly code. |
|
: ${CCAS='$(CC)'} |
# Set ASFLAGS if not already set. |
: ${CCASFLAGS='$(CFLAGS)'} |
|
|
|
MAKE_SHELL=/bin/sh |
|
|
if test $ac_cv_c_compiler_gnu = yes; then |
echo "$as_me:$LINENO: checking whether $CC needs -traditional" >&5 |
echo $ECHO_N "checking whether $CC needs -traditional... $ECHO_C" >&6 |
if test "${ac_cv_prog_gcc_traditional+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_pattern="Autoconf.*'x'" |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <sgtty.h> |
Autoconf TIOCGETP |
_ACEOF |
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | |
$EGREP "$ac_pattern" >/dev/null 2>&1; then |
ac_cv_prog_gcc_traditional=yes |
else |
ac_cv_prog_gcc_traditional=no |
fi |
rm -f conftest* |
|
|
if test $ac_cv_prog_gcc_traditional = no; then |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#include <termio.h> |
Autoconf TCGETA |
_ACEOF |
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | |
$EGREP "$ac_pattern" >/dev/null 2>&1; then |
ac_cv_prog_gcc_traditional=yes |
fi |
rm -f conftest* |
|
fi |
fi |
echo "$as_me:$LINENO: result: $ac_cv_prog_gcc_traditional" >&5 |
echo "${ECHO_T}$ac_cv_prog_gcc_traditional" >&6 |
if test $ac_cv_prog_gcc_traditional = yes; then |
CC="$CC -traditional" |
fi |
fi |
|
CFLAGS="-Wall -g" |
|
COMPILE_OR1K=unknown |
|
|
TESTS_ENV= |
|
OR1K_SRCDIR="./${top_srcdir}" |
case $target in |
or1k*|or32*) |
CFLAGS="$CFLAGS -nostdlib -mhard-div" |
COMPILE=or1k |
TESTS_ENV="$SIM" |
;; |
esac |
|
|
if test x$COMPILE = xor1k; then |
OR1K_EXCEPT_TRUE= |
OR1K_EXCEPT_FALSE='#' |
else |
OR1K_EXCEPT_TRUE='#' |
OR1K_EXCEPT_FALSE= |
fi |
|
|
|
echo "$as_me:$LINENO: checking whether to enable optimizations" >&5 |
echo $ECHO_N "checking whether to enable optimizations... $ECHO_C" >&6 |
# Check whether --enable-opt or --disable-opt was given. |
if test "${enable_opt+set}" = set; then |
enableval="$enable_opt" |
|
case "$enableval" in |
yes) |
CFLAGS="$CFLAGS -O" |
;; |
*) |
CFLAGS="$CFLAGS -O$enableval" |
;; |
esac |
|
fi; |
echo "$as_me:$LINENO: result: ${enable_opt-default}" >&5 |
echo "${ECHO_T}${enable_opt-default}" >&6 |
|
case "$enable_debugging" in |
yes) |
echo "$as_me:$LINENO: checking for malloc in -lefence" >&5 |
echo $ECHO_N "checking for malloc in -lefence... $ECHO_C" >&6 |
if test "${ac_cv_lib_efence_malloc+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_check_lib_save_LIBS=$LIBS |
LIBS="-lefence $LIBS" |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
/* Override any gcc2 internal prototype to avoid an error. */ |
#ifdef __cplusplus |
extern "C" |
#endif |
/* We use char because int might match the return type of a gcc2 |
builtin and then its argument prototype would still apply. */ |
char malloc (); |
int |
main () |
{ |
malloc (); |
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext conftest$ac_exeext |
if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 |
(eval $ac_link) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest$ac_exeext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_lib_efence_malloc=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_cv_lib_efence_malloc=no |
fi |
rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext |
LIBS=$ac_check_lib_save_LIBS |
fi |
echo "$as_me:$LINENO: result: $ac_cv_lib_efence_malloc" >&5 |
echo "${ECHO_T}$ac_cv_lib_efence_malloc" >&6 |
if test $ac_cv_lib_efence_malloc = yes; then |
cat >>confdefs.h <<_ACEOF |
#define HAVE_LIBEFENCE 1 |
_ACEOF |
|
LIBS="-lefence $LIBS" |
|
fi |
;; |
esac |
|
|
INCLUDES="-I\${top_srcdir}/support" |
CCASFLAGS="${CFLAGS} ${INCLUDES}" |
|
echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5 |
echo $ECHO_N "checking for an ANSI C-conforming const... $ECHO_C" >&6 |
if test "${ac_cv_c_const+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
|
int |
main () |
{ |
/* FIXME: Include the comments suggested by Paul. */ |
#ifndef __cplusplus |
/* Ultrix mips cc rejects this. */ |
typedef int charset[2]; |
const charset x; |
/* SunOS 4.1.1 cc rejects this. */ |
char const *const *ccp; |
char **p; |
/* NEC SVR4.0.2 mips cc rejects this. */ |
struct point {int x, y;}; |
static struct point const zero = {0,0}; |
/* AIX XL C 1.02.0.0 rejects this. |
It does not let you subtract one const X* pointer from another in |
an arm of an if-expression whose if-part is not a constant |
expression */ |
const char *g = "string"; |
ccp = &g + (g ? g-g : 0); |
/* HPUX 7.0 cc rejects these. */ |
++ccp; |
p = (char**) ccp; |
ccp = (char const *const *) p; |
{ /* SCO 3.2v4 cc rejects this. */ |
char *t; |
char const *s = 0 ? (char *) 0 : (char const *) 0; |
|
*t++ = 0; |
} |
{ /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */ |
int x[] = {25, 17}; |
const int *foo = &x[0]; |
++foo; |
} |
{ /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */ |
typedef const int *iptr; |
iptr p = 0; |
++p; |
} |
{ /* AIX XL C 1.02.0.0 rejects this saying |
"k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */ |
struct s { int j; const int *ap[3]; }; |
struct s *b; b->j = 5; |
} |
{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ |
const int foo = 10; |
} |
#endif |
|
; |
return 0; |
} |
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_c_const=yes |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
ac_cv_c_const=no |
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
fi |
echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5 |
echo "${ECHO_T}$ac_cv_c_const" >&6 |
if test $ac_cv_c_const = no; then |
|
cat >>confdefs.h <<\_ACEOF |
#define const |
_ACEOF |
|
fi |
|
echo "$as_me:$LINENO: checking for inline" >&5 |
echo $ECHO_N "checking for inline... $ECHO_C" >&6 |
if test "${ac_cv_c_inline+set}" = set; then |
echo $ECHO_N "(cached) $ECHO_C" >&6 |
else |
ac_cv_c_inline=no |
for ac_kw in inline __inline__ __inline; do |
cat >conftest.$ac_ext <<_ACEOF |
#line $LINENO "configure" |
/* confdefs.h. */ |
_ACEOF |
cat confdefs.h >>conftest.$ac_ext |
cat >>conftest.$ac_ext <<_ACEOF |
/* end confdefs.h. */ |
#ifndef __cplusplus |
typedef int foo_t; |
static $ac_kw foo_t static_foo () {return 0; } |
$ac_kw foo_t foo () {return 0; } |
#endif |
|
_ACEOF |
rm -f conftest.$ac_objext |
if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 |
(eval $ac_compile) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); } && |
{ ac_try='test -s conftest.$ac_objext' |
{ (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 |
(eval $ac_try) 2>&5 |
ac_status=$? |
echo "$as_me:$LINENO: \$? = $ac_status" >&5 |
(exit $ac_status); }; }; then |
ac_cv_c_inline=$ac_kw; break |
else |
echo "$as_me: failed program was:" >&5 |
sed 's/^/| /' conftest.$ac_ext >&5 |
|
fi |
rm -f conftest.$ac_objext conftest.$ac_ext |
done |
|
fi |
echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5 |
echo "${ECHO_T}$ac_cv_c_inline" >&6 |
case $ac_cv_c_inline in |
inline | yes) ;; |
no) |
cat >>confdefs.h <<\_ACEOF |
#define inline |
_ACEOF |
;; |
*) cat >>confdefs.h <<_ACEOF |
#define inline $ac_cv_c_inline |
_ACEOF |
;; |
esac |
|
|
ac_config_files="$ac_config_files Makefile support/Makefile uos/Makefile" |
cat >confcache <<\_ACEOF |
# This file is a shell script that caches the results of configure |
# tests run on this system so they can be shared between configure |
# scripts and configure runs, see configure's option --config-cache. |
# It is not useful on other systems. If it contains results you don't |
# want to keep, you may remove or edit it. |
# |
# config.status only pays attention to the cache file if you give it |
# the --recheck option to rerun configure. |
# |
# `ac_cv_env_foo' variables (set or unset) will be overridden when |
# loading this file, other *unset* `ac_cv_foo' will be assigned the |
# following values. |
|
_ACEOF |
|
# The following way of writing the cache mishandles newlines in values, |
# but we know of no workaround that is simple, portable, and efficient. |
# So, don't put newlines in cache variables' values. |
# Ultrix sh set writes to stderr and can't be redirected directly, |
# and sets the high bit in the cache file unless we assign to the vars. |
{ |
(set) 2>&1 | |
case `(ac_space=' '; set | grep ac_space) 2>&1` in |
*ac_space=\ *) |
# `set' does not quote correctly, so add quotes (double-quote |
# substitution turns \\\\ into \\, and sed turns \\ into \). |
sed -n \ |
"s/'/'\\\\''/g; |
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" |
;; |
*) |
# `set' quotes correctly as required by POSIX, so do not add quotes. |
sed -n \ |
"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" |
;; |
esac; |
} | |
sed ' |
t clear |
: clear |
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ |
t end |
/^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ |
: end' >>confcache |
if diff $cache_file confcache >/dev/null 2>&1; then :; else |
if test -w $cache_file; then |
test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" |
cat confcache >$cache_file |
else |
echo "not updating unwritable cache $cache_file" |
fi |
fi |
rm -f confcache |
|
test "x$prefix" = xNONE && prefix=$ac_default_prefix |
# Let make expand exec_prefix. |
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' |
|
# VPATH may cause trouble with some makes, so we remove $(srcdir), |
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and |
# trailing colons and then remove the whole line if VPATH becomes empty |
# (actually we leave an empty line to preserve line numbers). |
if test "x$srcdir" = x.; then |
ac_vpsub='/^[ ]*VPATH[ ]*=/{ |
s/:*\$(srcdir):*/:/; |
s/:*\${srcdir}:*/:/; |
s/:*@srcdir@:*/:/; |
s/^\([^=]*=[ ]*\):*/\1/; |
s/:*$//; |
s/^[^=]*=[ ]*$//; |
}' |
fi |
|
# Transform confdefs.h into DEFS. |
# Protect against shell expansion while executing Makefile rules. |
# Protect against Makefile macro expansion. |
# |
# If the first sed substitution is executed (which looks for macros that |
# take arguments), then we branch to the quote section. Otherwise, |
# look for a macro that doesn't take arguments. |
cat >confdef2opt.sed <<\_ACEOF |
t clear |
: clear |
s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g |
t quote |
s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g |
t quote |
d |
: quote |
s,[ `~#$^&*(){}\\|;'"<>?],\\&,g |
s,\[,\\&,g |
s,\],\\&,g |
s,\$,$$,g |
p |
_ACEOF |
# We use echo to avoid assuming a particular line-breaking character. |
# The extra dot is to prevent the shell from consuming trailing |
# line-breaks from the sub-command output. A line-break within |
# single-quotes doesn't work because, if this script is created in a |
# platform that uses two characters for line-breaks (e.g., DOS), tr |
# would break. |
ac_LF_and_DOT=`echo; echo .` |
DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` |
rm -f confdef2opt.sed |
|
|
ac_libobjs= |
ac_ltlibobjs= |
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue |
# 1. Remove the extension, and $U if already installed. |
ac_i=`echo "$ac_i" | |
sed 's/\$U\././;s/\.o$//;s/\.obj$//'` |
# 2. Add them. |
ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" |
ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' |
done |
LIBOBJS=$ac_libobjs |
|
LTLIBOBJS=$ac_ltlibobjs |
|
|
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then |
{ { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
echo "$as_me: error: conditional \"AMDEP\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
if test -z "${OR1K_EXCEPT_TRUE}" && test -z "${OR1K_EXCEPT_FALSE}"; then |
{ { echo "$as_me:$LINENO: error: conditional \"OR1K_EXCEPT\" was never defined. |
Usually this means the macro was only invoked conditionally." >&5 |
echo "$as_me: error: conditional \"OR1K_EXCEPT\" was never defined. |
Usually this means the macro was only invoked conditionally." >&2;} |
{ (exit 1); exit 1; }; } |
fi |
|
: ${CONFIG_STATUS=./config.status} |
ac_clean_files_save=$ac_clean_files |
ac_clean_files="$ac_clean_files $CONFIG_STATUS" |
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 |
echo "$as_me: creating $CONFIG_STATUS" >&6;} |
cat >$CONFIG_STATUS <<_ACEOF |
#! $SHELL |
# Generated by $as_me. |
# Run this file to recreate the current configuration. |
# Compiler output produced by configure, useful for debugging |
# configure, is in config.log if it exists. |
|
debug=false |
ac_cs_recheck=false |
ac_cs_silent=false |
SHELL=\${CONFIG_SHELL-$SHELL} |
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF |
## --------------------- ## |
## M4sh Initialization. ## |
## --------------------- ## |
|
# Be Bourne compatible |
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then |
emulate sh |
NULLCMD=: |
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which |
# is contrary to our usage. Disable this feature. |
alias -g '${1+"$@"}'='"$@"' |
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then |
set -o posix |
fi |
|
# Support unset when possible. |
if (FOO=FOO; unset FOO) >/dev/null 2>&1; then |
as_unset=unset |
else |
as_unset=false |
fi |
|
|
# Work around bugs in pre-3.0 UWIN ksh. |
$as_unset ENV MAIL MAILPATH |
PS1='$ ' |
PS2='> ' |
PS4='+ ' |
|
# NLS nuisances. |
for as_var in \ |
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ |
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ |
LC_TELEPHONE LC_TIME |
do |
if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then |
eval $as_var=C; export $as_var |
else |
$as_unset $as_var |
fi |
done |
|
# Required to use basename. |
if expr a : '\(a\)' >/dev/null 2>&1; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then |
as_basename=basename |
else |
as_basename=false |
fi |
|
|
# Name of the executable. |
as_me=`$as_basename "$0" || |
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ |
X"$0" : 'X\(//\)$' \| \ |
X"$0" : 'X\(/\)$' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X/"$0" | |
sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } |
/^X\/\(\/\/\)$/{ s//\1/; q; } |
/^X\/\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
|
|
# PATH needs CR, and LINENO needs CR and PATH. |
# Avoid depending upon Character Ranges. |
as_cr_letters='abcdefghijklmnopqrstuvwxyz' |
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' |
as_cr_Letters=$as_cr_letters$as_cr_LETTERS |
as_cr_digits='0123456789' |
as_cr_alnum=$as_cr_Letters$as_cr_digits |
|
# The user is always right. |
if test "${PATH_SEPARATOR+set}" != set; then |
echo "#! /bin/sh" >conf$$.sh |
echo "exit 0" >>conf$$.sh |
chmod +x conf$$.sh |
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then |
PATH_SEPARATOR=';' |
else |
PATH_SEPARATOR=: |
fi |
rm -f conf$$.sh |
fi |
|
|
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x$as_lineno_3" = "x$as_lineno_2" || { |
# Find who we are. Look in the path if we contain no path at all |
# relative or not. |
case $0 in |
*[\\/]* ) as_myself=$0 ;; |
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in $PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break |
done |
|
;; |
esac |
# We did not find ourselves, most probably we were run as `sh COMMAND' |
# in which case we are not to be found in the path. |
if test "x$as_myself" = x; then |
as_myself=$0 |
fi |
if test ! -f "$as_myself"; then |
{ { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 |
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} |
{ (exit 1); exit 1; }; } |
fi |
case $CONFIG_SHELL in |
'') |
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR |
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH |
do |
IFS=$as_save_IFS |
test -z "$as_dir" && as_dir=. |
for as_base in sh bash ksh sh5; do |
case $as_dir in |
/*) |
if ("$as_dir/$as_base" -c ' |
as_lineno_1=$LINENO |
as_lineno_2=$LINENO |
as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` |
test "x$as_lineno_1" != "x$as_lineno_2" && |
test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then |
$as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } |
$as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } |
CONFIG_SHELL=$as_dir/$as_base |
export CONFIG_SHELL |
exec "$CONFIG_SHELL" "$0" ${1+"$@"} |
fi;; |
esac |
done |
done |
;; |
esac |
|
# Create $as_me.lineno as a copy of $as_myself, but with $LINENO |
# uniformly replaced by the line number. The first 'sed' inserts a |
# line-number line before each line; the second 'sed' does the real |
# work. The second script uses 'N' to pair each line-number line |
# with the numbered line, and appends trailing '-' during |
# substitution so that $LINENO is not a special case at line end. |
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the |
# second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) |
sed '=' <$as_myself | |
sed ' |
N |
s,$,-, |
: loop |
s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, |
t loop |
s,-$,, |
s,^['$as_cr_digits']*\n,, |
' >$as_me.lineno && |
chmod +x $as_me.lineno || |
{ { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 |
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} |
{ (exit 1); exit 1; }; } |
|
# Don't try to exec as it changes $[0], causing all sort of problems |
# (the dirname of $[0] is not the place where we might find the |
# original and so on. Autoconf is especially sensible to this). |
. ./$as_me.lineno |
# Exit status is that of the last command. |
exit |
} |
|
|
case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in |
*c*,-n*) ECHO_N= ECHO_C=' |
' ECHO_T=' ' ;; |
*c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; |
*) ECHO_N= ECHO_C='\c' ECHO_T= ;; |
esac |
|
if expr a : '\(a\)' >/dev/null 2>&1; then |
as_expr=expr |
else |
as_expr=false |
fi |
|
rm -f conf$$ conf$$.exe conf$$.file |
echo >conf$$.file |
if ln -s conf$$.file conf$$ 2>/dev/null; then |
# We could just check for DJGPP; but this test a) works b) is more generic |
# and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). |
if test -f conf$$.exe; then |
# Don't use ln at all; we don't have any links |
as_ln_s='cp -p' |
else |
as_ln_s='ln -s' |
fi |
elif ln conf$$.file conf$$ 2>/dev/null; then |
as_ln_s=ln |
else |
as_ln_s='cp -p' |
fi |
rm -f conf$$ conf$$.exe conf$$.file |
|
if mkdir -p . 2>/dev/null; then |
as_mkdir_p=: |
else |
as_mkdir_p=false |
fi |
|
as_executable_p="test -f" |
|
# Sed expression to map a string onto a valid CPP name. |
as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" |
|
# Sed expression to map a string onto a valid variable name. |
as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" |
|
|
# IFS |
# We need space, tab and new line, in precisely that order. |
as_nl=' |
' |
IFS=" $as_nl" |
|
# CDPATH. |
$as_unset CDPATH |
|
exec 6>&1 |
|
# Open the log real soon, to keep \$[0] and so on meaningful, and to |
# report actual input values of CONFIG_FILES etc. instead of their |
# values after options handling. Logging --version etc. is OK. |
exec 5>>config.log |
{ |
echo |
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX |
## Running $as_me. ## |
_ASBOX |
} >&5 |
cat >&5 <<_CSEOF |
|
This file was extended by $as_me, which was |
generated by GNU Autoconf 2.57. Invocation command line was |
|
CONFIG_FILES = $CONFIG_FILES |
CONFIG_HEADERS = $CONFIG_HEADERS |
CONFIG_LINKS = $CONFIG_LINKS |
CONFIG_COMMANDS = $CONFIG_COMMANDS |
$ $0 $@ |
|
_CSEOF |
echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 |
echo >&5 |
_ACEOF |
|
# Files that config.status was made for. |
if test -n "$ac_config_files"; then |
echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS |
fi |
|
if test -n "$ac_config_headers"; then |
echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS |
fi |
|
if test -n "$ac_config_links"; then |
echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS |
fi |
|
if test -n "$ac_config_commands"; then |
echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS |
fi |
|
cat >>$CONFIG_STATUS <<\_ACEOF |
|
ac_cs_usage="\ |
\`$as_me' instantiates files from templates according to the |
current configuration. |
|
Usage: $0 [OPTIONS] [FILE]... |
|
-h, --help print this help, then exit |
-V, --version print version number, then exit |
-q, --quiet do not print progress messages |
-d, --debug don't remove temporary files |
--recheck update $as_me by reconfiguring in the same conditions |
--file=FILE[:TEMPLATE] |
instantiate the configuration file FILE |
|
Configuration files: |
$config_files |
|
Configuration commands: |
$config_commands |
|
Report bugs to <bug-autoconf@gnu.org>." |
_ACEOF |
|
cat >>$CONFIG_STATUS <<_ACEOF |
ac_cs_version="\\ |
config.status |
configured by $0, generated by GNU Autoconf 2.57, |
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" |
|
Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 |
Free Software Foundation, Inc. |
This config.status script is free software; the Free Software Foundation |
gives unlimited permission to copy, distribute and modify it." |
srcdir=$srcdir |
INSTALL="$INSTALL" |
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF |
# If no file are specified by the user, then we need to provide default |
# value. By we need to know if files were specified by the user. |
ac_need_defaults=: |
while test $# != 0 |
do |
case $1 in |
--*=*) |
ac_option=`expr "x$1" : 'x\([^=]*\)='` |
ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` |
ac_shift=: |
;; |
-*) |
ac_option=$1 |
ac_optarg=$2 |
ac_shift=shift |
;; |
*) # This is not an option, so the user has probably given explicit |
# arguments. |
ac_option=$1 |
ac_need_defaults=false;; |
esac |
|
case $ac_option in |
# Handling of the options. |
_ACEOF |
cat >>$CONFIG_STATUS <<\_ACEOF |
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) |
ac_cs_recheck=: ;; |
--version | --vers* | -V ) |
echo "$ac_cs_version"; exit 0 ;; |
--he | --h) |
# Conflict between --help and --header |
{ { echo "$as_me:$LINENO: error: ambiguous option: $1 |
Try \`$0 --help' for more information." >&5 |
echo "$as_me: error: ambiguous option: $1 |
Try \`$0 --help' for more information." >&2;} |
{ (exit 1); exit 1; }; };; |
--help | --hel | -h ) |
echo "$ac_cs_usage"; exit 0 ;; |
--debug | --d* | -d ) |
debug=: ;; |
--file | --fil | --fi | --f ) |
$ac_shift |
CONFIG_FILES="$CONFIG_FILES $ac_optarg" |
ac_need_defaults=false;; |
--header | --heade | --head | --hea ) |
$ac_shift |
CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" |
ac_need_defaults=false;; |
-q | -quiet | --quiet | --quie | --qui | --qu | --q \ |
| -silent | --silent | --silen | --sile | --sil | --si | --s) |
ac_cs_silent=: ;; |
|
# This is an error. |
-*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&5 |
echo "$as_me: error: unrecognized option: $1 |
Try \`$0 --help' for more information." >&2;} |
{ (exit 1); exit 1; }; } ;; |
|
*) ac_config_targets="$ac_config_targets $1" ;; |
|
esac |
shift |
done |
|
ac_configure_extra_args= |
|
if $ac_cs_silent; then |
exec 6>/dev/null |
ac_configure_extra_args="$ac_configure_extra_args --silent" |
fi |
|
_ACEOF |
cat >>$CONFIG_STATUS <<_ACEOF |
if \$ac_cs_recheck; then |
echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 |
exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion |
fi |
|
_ACEOF |
|
cat >>$CONFIG_STATUS <<_ACEOF |
# |
# INIT-COMMANDS section. |
# |
|
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" |
|
_ACEOF |
|
|
|
cat >>$CONFIG_STATUS <<\_ACEOF |
for ac_config_target in $ac_config_targets |
do |
case "$ac_config_target" in |
# Handling of arguments. |
"Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; |
"support/Makefile" ) CONFIG_FILES="$CONFIG_FILES support/Makefile" ;; |
"uos/Makefile" ) CONFIG_FILES="$CONFIG_FILES uos/Makefile" ;; |
"depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; |
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 |
echo "$as_me: error: invalid argument: $ac_config_target" >&2;} |
{ (exit 1); exit 1; }; };; |
esac |
done |
|
# If the user did not use the arguments to specify the items to instantiate, |
# then the envvar interface is used. Set only those that are not. |
# We use the long form for the default assignment because of an extremely |
# bizarre bug on SunOS 4.1.3. |
if $ac_need_defaults; then |
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files |
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands |
fi |
|
# Have a temporary directory for convenience. Make it in the build tree |
# simply because there is no reason to put it here, and in addition, |
# creating and moving files from /tmp can sometimes cause problems. |
# Create a temporary directory, and hook for its removal unless debugging. |
$debug || |
{ |
trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 |
trap '{ (exit 1); exit 1; }' 1 2 13 15 |
} |
|
# Create a (secure) tmp directory for tmp files. |
|
{ |
tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && |
test -n "$tmp" && test -d "$tmp" |
} || |
{ |
tmp=./confstat$$-$RANDOM |
(umask 077 && mkdir $tmp) |
} || |
{ |
echo "$me: cannot create a temporary directory in ." >&2 |
{ (exit 1); exit 1; } |
} |
|
_ACEOF |
|
cat >>$CONFIG_STATUS <<_ACEOF |
|
# |
# CONFIG_FILES section. |
# |
|
# No need to generate the scripts if there are no CONFIG_FILES. |
# This happens for instance when ./config.status config.h |
if test -n "\$CONFIG_FILES"; then |
# Protect against being on the right side of a sed subst in config.status. |
sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; |
s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF |
s,@SHELL@,$SHELL,;t t |
s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t |
s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t |
s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t |
s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t |
s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t |
s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t |
s,@exec_prefix@,$exec_prefix,;t t |
s,@prefix@,$prefix,;t t |
s,@program_transform_name@,$program_transform_name,;t t |
s,@bindir@,$bindir,;t t |
s,@sbindir@,$sbindir,;t t |
s,@libexecdir@,$libexecdir,;t t |
s,@datadir@,$datadir,;t t |
s,@sysconfdir@,$sysconfdir,;t t |
s,@sharedstatedir@,$sharedstatedir,;t t |
s,@localstatedir@,$localstatedir,;t t |
s,@libdir@,$libdir,;t t |
s,@includedir@,$includedir,;t t |
s,@oldincludedir@,$oldincludedir,;t t |
s,@infodir@,$infodir,;t t |
s,@mandir@,$mandir,;t t |
s,@build_alias@,$build_alias,;t t |
s,@host_alias@,$host_alias,;t t |
s,@target_alias@,$target_alias,;t t |
s,@DEFS@,$DEFS,;t t |
s,@ECHO_C@,$ECHO_C,;t t |
s,@ECHO_N@,$ECHO_N,;t t |
s,@ECHO_T@,$ECHO_T,;t t |
s,@LIBS@,$LIBS,;t t |
s,@build@,$build,;t t |
s,@build_cpu@,$build_cpu,;t t |
s,@build_vendor@,$build_vendor,;t t |
s,@build_os@,$build_os,;t t |
s,@host@,$host,;t t |
s,@host_cpu@,$host_cpu,;t t |
s,@host_vendor@,$host_vendor,;t t |
s,@host_os@,$host_os,;t t |
s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t |
s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t |
s,@INSTALL_DATA@,$INSTALL_DATA,;t t |
s,@PACKAGE@,$PACKAGE,;t t |
s,@VERSION@,$VERSION,;t t |
s,@ACLOCAL@,$ACLOCAL,;t t |
s,@AUTOCONF@,$AUTOCONF,;t t |
s,@AUTOMAKE@,$AUTOMAKE,;t t |
s,@AUTOHEADER@,$AUTOHEADER,;t t |
s,@MAKEINFO@,$MAKEINFO,;t t |
s,@AMTAR@,$AMTAR,;t t |
s,@install_sh@,$install_sh,;t t |
s,@STRIP@,$STRIP,;t t |
s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t |
s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t |
s,@AWK@,$AWK,;t t |
s,@SET_MAKE@,$SET_MAKE,;t t |
s,@CC@,$CC,;t t |
s,@ac_ct_CC@,$ac_ct_CC,;t t |
s,@RANLIB@,$RANLIB,;t t |
s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t |
s,@LD@,$LD,;t t |
s,@ac_ct_LD@,$ac_ct_LD,;t t |
s,@SIM@,$SIM,;t t |
s,@ac_ct_SIM@,$ac_ct_SIM,;t t |
s,@CFLAGS@,$CFLAGS,;t t |
s,@LDFLAGS@,$LDFLAGS,;t t |
s,@CPPFLAGS@,$CPPFLAGS,;t t |
s,@EXEEXT@,$EXEEXT,;t t |
s,@OBJEXT@,$OBJEXT,;t t |
s,@DEPDIR@,$DEPDIR,;t t |
s,@am__include@,$am__include,;t t |
s,@am__quote@,$am__quote,;t t |
s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t |
s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t |
s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t |
s,@CCDEPMODE@,$CCDEPMODE,;t t |
s,@CPP@,$CPP,;t t |
s,@EGREP@,$EGREP,;t t |
s,@CCAS@,$CCAS,;t t |
s,@CCASFLAGS@,$CCASFLAGS,;t t |
s,@MAKE_SHELL@,$MAKE_SHELL,;t t |
s,@TESTS_ENV@,$TESTS_ENV,;t t |
s,@OR1K_SRCDIR@,$OR1K_SRCDIR,;t t |
s,@OR1K_EXCEPT_TRUE@,$OR1K_EXCEPT_TRUE,;t t |
s,@OR1K_EXCEPT_FALSE@,$OR1K_EXCEPT_FALSE,;t t |
s,@INCLUDES@,$INCLUDES,;t t |
s,@LIBOBJS@,$LIBOBJS,;t t |
s,@LTLIBOBJS@,$LTLIBOBJS,;t t |
CEOF |
|
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF |
# Split the substitutions into bite-sized pieces for seds with |
# small command number limits, like on Digital OSF/1 and HP-UX. |
ac_max_sed_lines=48 |
ac_sed_frag=1 # Number of current file. |
ac_beg=1 # First line for current file. |
ac_end=$ac_max_sed_lines # Line after last line for current file. |
ac_more_lines=: |
ac_sed_cmds= |
while $ac_more_lines; do |
if test $ac_beg -gt 1; then |
sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
else |
sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag |
fi |
if test ! -s $tmp/subs.frag; then |
ac_more_lines=false |
else |
# The purpose of the label and of the branching condition is to |
# speed up the sed processing (if there are no `@' at all, there |
# is no need to browse any of the substitutions). |
# These are the two extra sed commands mentioned above. |
(echo ':t |
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" |
else |
ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" |
fi |
ac_sed_frag=`expr $ac_sed_frag + 1` |
ac_beg=$ac_end |
ac_end=`expr $ac_end + $ac_max_sed_lines` |
fi |
done |
if test -z "$ac_sed_cmds"; then |
ac_sed_cmds=cat |
fi |
fi # test -n "$CONFIG_FILES" |
|
_ACEOF |
cat >>$CONFIG_STATUS <<\_ACEOF |
for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue |
# Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". |
case $ac_file in |
- | *:- | *:-:* ) # input from stdin |
cat >$tmp/stdin |
ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
*:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` |
ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; |
* ) ac_file_in=$ac_file.in ;; |
esac |
|
# Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. |
ac_dir=`(dirname "$ac_file") 2>/dev/null || |
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$ac_file" : 'X\(//\)[^/]' \| \ |
X"$ac_file" : 'X\(//\)$' \| \ |
X"$ac_file" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$ac_file" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
{ if $as_mkdir_p; then |
mkdir -p "$ac_dir" |
else |
as_dir="$ac_dir" |
as_dirs= |
while test ! -d "$as_dir"; do |
as_dirs="$as_dir $as_dirs" |
as_dir=`(dirname "$as_dir") 2>/dev/null || |
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$as_dir" : 'X\(//\)[^/]' \| \ |
X"$as_dir" : 'X\(//\)$' \| \ |
X"$as_dir" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$as_dir" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
done |
test ! -n "$as_dirs" || mkdir $as_dirs |
fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 |
echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} |
{ (exit 1); exit 1; }; }; } |
|
ac_builddir=. |
|
if test "$ac_dir" != .; then |
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
# A "../" for each directory in $ac_dir_suffix. |
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
else |
ac_dir_suffix= ac_top_builddir= |
fi |
|
case $srcdir in |
.) # No --srcdir option. We are building in place. |
ac_srcdir=. |
if test -z "$ac_top_builddir"; then |
ac_top_srcdir=. |
else |
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
fi ;; |
[\\/]* | ?:[\\/]* ) # Absolute path. |
ac_srcdir=$srcdir$ac_dir_suffix; |
ac_top_srcdir=$srcdir ;; |
*) # Relative path. |
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
ac_top_srcdir=$ac_top_builddir$srcdir ;; |
esac |
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be |
# absolute. |
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` |
ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` |
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` |
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` |
|
|
case $INSTALL in |
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; |
*) ac_INSTALL=$ac_top_builddir$INSTALL ;; |
esac |
|
if test x"$ac_file" != x-; then |
{ echo "$as_me:$LINENO: creating $ac_file" >&5 |
echo "$as_me: creating $ac_file" >&6;} |
rm -f "$ac_file" |
fi |
# Let's still pretend it is `configure' which instantiates (i.e., don't |
# use $as_me), people would be surprised to read: |
# /* config.h. Generated by config.status. */ |
if test x"$ac_file" = x-; then |
configure_input= |
else |
configure_input="$ac_file. " |
fi |
configure_input=$configure_input"Generated from `echo $ac_file_in | |
sed 's,.*/,,'` by configure." |
|
# First look for the input files in the build tree, otherwise in the |
# src tree. |
ac_file_inputs=`IFS=: |
for f in $ac_file_in; do |
case $f in |
-) echo $tmp/stdin ;; |
[\\/$]*) |
# Absolute (can't be DOS-style, as IFS=:) |
test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
echo $f;; |
*) # Relative |
if test -f "$f"; then |
# Build tree |
echo $f |
elif test -f "$srcdir/$f"; then |
# Source tree |
echo $srcdir/$f |
else |
# /dev/null tree |
{ { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 |
echo "$as_me: error: cannot find input file: $f" >&2;} |
{ (exit 1); exit 1; }; } |
fi;; |
esac |
done` || { (exit 1); exit 1; } |
_ACEOF |
cat >>$CONFIG_STATUS <<_ACEOF |
sed "$ac_vpsub |
$extrasub |
_ACEOF |
cat >>$CONFIG_STATUS <<\_ACEOF |
:t |
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b |
s,@configure_input@,$configure_input,;t t |
s,@srcdir@,$ac_srcdir,;t t |
s,@abs_srcdir@,$ac_abs_srcdir,;t t |
s,@top_srcdir@,$ac_top_srcdir,;t t |
s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t |
s,@builddir@,$ac_builddir,;t t |
s,@abs_builddir@,$ac_abs_builddir,;t t |
s,@top_builddir@,$ac_top_builddir,;t t |
s,@abs_top_builddir@,$ac_abs_top_builddir,;t t |
s,@INSTALL@,$ac_INSTALL,;t t |
" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out |
rm -f $tmp/stdin |
if test x"$ac_file" != x-; then |
mv $tmp/out $ac_file |
else |
cat $tmp/out |
rm -f $tmp/out |
fi |
|
done |
_ACEOF |
cat >>$CONFIG_STATUS <<\_ACEOF |
|
# |
# CONFIG_COMMANDS section. |
# |
for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue |
ac_dest=`echo "$ac_file" | sed 's,:.*,,'` |
ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` |
ac_dir=`(dirname "$ac_dest") 2>/dev/null || |
$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$ac_dest" : 'X\(//\)[^/]' \| \ |
X"$ac_dest" : 'X\(//\)$' \| \ |
X"$ac_dest" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$ac_dest" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
ac_builddir=. |
|
if test "$ac_dir" != .; then |
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` |
# A "../" for each directory in $ac_dir_suffix. |
ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` |
else |
ac_dir_suffix= ac_top_builddir= |
fi |
|
case $srcdir in |
.) # No --srcdir option. We are building in place. |
ac_srcdir=. |
if test -z "$ac_top_builddir"; then |
ac_top_srcdir=. |
else |
ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` |
fi ;; |
[\\/]* | ?:[\\/]* ) # Absolute path. |
ac_srcdir=$srcdir$ac_dir_suffix; |
ac_top_srcdir=$srcdir ;; |
*) # Relative path. |
ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix |
ac_top_srcdir=$ac_top_builddir$srcdir ;; |
esac |
# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be |
# absolute. |
ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` |
ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` |
ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` |
ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` |
|
|
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5 |
echo "$as_me: executing $ac_dest commands" >&6;} |
case $ac_dest in |
depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do |
# Strip MF so we end up with the name of the file. |
mf=`echo "$mf" | sed -e 's/:.*$//'` |
# Check whether this is an Automake generated Makefile or not. |
# We used to match only the files named `Makefile.in', but |
# some people rename them; so instead we look at the file content. |
# Grep'ing the first line is not enough: some people post-process |
# each Makefile.in and add a new line on top of each file to say so. |
# So let's grep whole file. |
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then |
dirpart=`(dirname "$mf") 2>/dev/null || |
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$mf" : 'X\(//\)[^/]' \| \ |
X"$mf" : 'X\(//\)$' \| \ |
X"$mf" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$mf" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
else |
continue |
fi |
grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue |
# Extract the definition of DEP_FILES from the Makefile without |
# running `make'. |
DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"` |
test -z "$DEPDIR" && continue |
# When using ansi2knr, U may be empty or an underscore; expand it |
U=`sed -n -e '/^U = / s///p' < "$mf"` |
test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR" |
# We invoke sed twice because it is the simplest approach to |
# changing $(DEPDIR) to its actual value in the expansion. |
for file in `sed -n -e ' |
/^DEP_FILES = .*\\\\$/ { |
s/^DEP_FILES = // |
:loop |
s/\\\\$// |
p |
n |
/\\\\$/ b loop |
p |
} |
/^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \ |
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do |
# Make sure the directory exists. |
test -f "$dirpart/$file" && continue |
fdir=`(dirname "$file") 2>/dev/null || |
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$file" : 'X\(//\)[^/]' \| \ |
X"$file" : 'X\(//\)$' \| \ |
X"$file" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$file" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
{ if $as_mkdir_p; then |
mkdir -p $dirpart/$fdir |
else |
as_dir=$dirpart/$fdir |
as_dirs= |
while test ! -d "$as_dir"; do |
as_dirs="$as_dir $as_dirs" |
as_dir=`(dirname "$as_dir") 2>/dev/null || |
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ |
X"$as_dir" : 'X\(//\)[^/]' \| \ |
X"$as_dir" : 'X\(//\)$' \| \ |
X"$as_dir" : 'X\(/\)' \| \ |
. : '\(.\)' 2>/dev/null || |
echo X"$as_dir" | |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } |
/^X\(\/\/\)[^/].*/{ s//\1/; q; } |
/^X\(\/\/\)$/{ s//\1/; q; } |
/^X\(\/\).*/{ s//\1/; q; } |
s/.*/./; q'` |
done |
test ! -n "$as_dirs" || mkdir $as_dirs |
fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5 |
echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;} |
{ (exit 1); exit 1; }; }; } |
|
# echo "creating $dirpart/$file" |
echo '# dummy' > "$dirpart/$file" |
done |
done |
;; |
esac |
done |
_ACEOF |
|
cat >>$CONFIG_STATUS <<\_ACEOF |
|
{ (exit 0); exit 0; } |
_ACEOF |
chmod +x $CONFIG_STATUS |
ac_clean_files=$ac_clean_files_save |
|
|
# configure is writing to config.log, and then calls config.status. |
# config.status does its own redirection, appending to config.log. |
# Unfortunately, on DOS this fails, as config.log is still kept open |
# by configure, so config.status won't be able to write to it; its |
# output is simply discarded. So we exec the FD to /dev/null, |
# effectively closing config.log, so it can be properly (re)opened and |
# appended to by config.status. When coming back to configure, we |
# need to make the FD available again. |
if test "$no_create" != yes; then |
ac_cs_success=: |
ac_config_status_args= |
test "$silent" = yes && |
ac_config_status_args="$ac_config_status_args --quiet" |
exec 5>/dev/null |
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false |
exec 5>>config.log |
# Use ||, not &&, to avoid exiting from the if with $? = 1, which |
# would make configure fail if this is the last instruction. |
$ac_cs_success || { (exit 1); exit 1; } |
fi |
|
configure
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 1765)
@@ -0,0 +1,914 @@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+ # PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+DEPDIR = @DEPDIR@
+INCLUDES = @INCLUDES@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+MAKE_SHELL = @MAKE_SHELL@
+OR1K_SRCDIR = @OR1K_SRCDIR@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+SIM = @SIM@
+STRIP = @STRIP@
+TESTS_ENV = @TESTS_ENV@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+################### Tests #####################
+# tests in this directory
+OR1K_TESTS = basic cache cfg dmatest eth mmu except_test int_test flag fbtest kbdtest
+IND_TESTS = exit cbasic local_global mul mycompress dhry functest mem_test
+# inst_set_test
+ACV_TESTS = acv_uart acv_gpio
+MC_TESTS = mc_dram mc_ssram mc_async mc_sync
+# Subdirectory tests
+SUB_TESTS =
+OR1K_SUB_TESTS = uos
+
+###############################################
+ALL_TESTS = $(IND_TESTS) $(OR1K_TESTS) $(ACV_TESTS) $(MC_TESTS)
+TESTS = $(IND_TESTS) $(OR1K_TESTS)
+bin_PROGRAMS = $(ALL_TESTS)
+
+######### Platform Independent Tests ##########
+exit_SOURCES = $(OR1K_SUPPORT_S) support.h exit.c
+cbasic_SOURCES = $(OR1K_SUPPORT_S) support.h cbasic.c
+local_global_SOURCES = $(OR1K_SUPPORT_S) support.h local_global.c
+mul_SOURCES = $(OR1K_SUPPORT_S) support.h mul.c
+dhry_SOURCES = $(OR1K_SUPPORT_S) support.h dhry.h dhry.c
+mycompress_SOURCES = $(OR1K_SUPPORT_S) support.h mycompress.c
+functest_SOURCES = $(OR1K_SUPPORT_S) support.h functest.c
+mem_test_SOURCES = $(OR1K_SUPPORT_S) support.h mem_test.c
+inst_set_test_SOURCES = $(OR1K_SUPPORT_S) support.h inst_set_test.c
+
+###############################################
+@OR1K_EXCEPT_TRUE@exit_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@cbasic_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@local_global_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@mul_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@dhry_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@mycompress_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@functest_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@mem_test_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@inst_set_test_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+
+######### MC Tests ############################
+@OR1K_EXCEPT_TRUE@mc_dram_SOURCES = except_mc.S mc_common.h mc_common.c mc_dram.h mc_dram.c
+@OR1K_EXCEPT_TRUE@mc_dram_LDFLAGS = -T$(OR1K_SRCDIR)except_mc.ld
+@OR1K_EXCEPT_TRUE@mc_ssram_SOURCES = except_mc.S mc_common.h mc_common.c mc_ssramh mc_ssram.c
+@OR1K_EXCEPT_TRUE@mc_ssram_LDFLAGS = -T$(OR1K_SRCDIR)except_mc.ld
+@OR1K_EXCEPT_TRUE@mc_async_SOURCES = except_mc.S mc_common.h mc_common.c mc_async.h mc_async.c
+@OR1K_EXCEPT_TRUE@mc_async_LDFLAGS = -T$(OR1K_SRCDIR)except_mc.ld
+@OR1K_EXCEPT_TRUE@mc_sync_SOURCES = except_mc.S mc_common.h mc_common.c mc_sync.h mc_sync.c
+@OR1K_EXCEPT_TRUE@mc_sync_LDFLAGS = -T$(OR1K_SRCDIR)except_mc.ld
+###############################################
+
+####### Platform Dependent Tests - OR1K ########
+################################################
+
+##### Platform Dependent Tests - not OR1K #####
+@OR1K_EXCEPT_TRUE@basic_SOURCES = basic.S spr_defs.h
+@OR1K_EXCEPT_FALSE@basic_SOURCES =
+@OR1K_EXCEPT_TRUE@basic_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@basic_LDADD =
+@OR1K_EXCEPT_TRUE@flag_SOURCES = flag.S spr_defs.h
+@OR1K_EXCEPT_FALSE@flag_SOURCES =
+@OR1K_EXCEPT_TRUE@flag_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@flag_LDADD =
+@OR1K_EXCEPT_TRUE@cache_SOURCES = support.h cache.c cache_asm.S
+@OR1K_EXCEPT_FALSE@cache_SOURCES =
+@OR1K_EXCEPT_TRUE@cache_LDFLAGS = -T$(OR1K_SRCDIR)/cache.ld
+@OR1K_EXCEPT_TRUE@cfg_SOURCES = cfg.S spr_defs.h
+@OR1K_EXCEPT_FALSE@cfg_SOURCES =
+@OR1K_EXCEPT_TRUE@cfg_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@cfg_LDADD =
+@OR1K_EXCEPT_TRUE@dmatest_SOURCES = $(OR1K_SUPPORT_S) support.h dmatest.c
+@OR1K_EXCEPT_FALSE@dmatest_SOURCES =
+@OR1K_EXCEPT_TRUE@dmatest_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@eth_SOURCES = $(OR1K_SUPPORT_S) support.h eth.c
+@OR1K_EXCEPT_FALSE@eth_SOURCES =
+@OR1K_EXCEPT_TRUE@eth_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@acv_uart_SOURCES = $(OR1K_SUPPORT_S) support.h acv_uart.c
+@OR1K_EXCEPT_FALSE@acv_uart_SOURCES =
+@OR1K_EXCEPT_TRUE@acv_uart_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@acv_gpio_SOURCES = $(OR1K_SUPPORT_S) support.h acv_gpio.c
+@OR1K_EXCEPT_FALSE@acv_gpio_SOURCES =
+@OR1K_EXCEPT_TRUE@acv_gpio_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@mmu_SOURCES = $(OR1K_SUPPORT_S) support.h mmu.c mmu_asm.S
+@OR1K_EXCEPT_FALSE@mmu_SOURCES =
+@OR1K_EXCEPT_TRUE@mmu_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@except_test_SOURCES = except_test_s.S except_test.c spr_defs.h
+@OR1K_EXCEPT_FALSE@except_test_SOURCES =
+@OR1K_EXCEPT_TRUE@except_test_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@int_test_SOURCES = spr_defs.h int_test.S
+@OR1K_EXCEPT_FALSE@int_test_SOURCES =
+@OR1K_EXCEPT_TRUE@int_test_LDFLAGS = -T$(OR1K_SRCDIR)/int_test.ld
+@OR1K_EXCEPT_TRUE@fbtest_SOURCES = $(OR1K_SUPPORT_S) support.h fbtest.c
+@OR1K_EXCEPT_FALSE@fbtest_SOURCES =
+@OR1K_EXCEPT_TRUE@fbtest_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+@OR1K_EXCEPT_TRUE@kbdtest_SOURCES = $(OR1K_SUPPORT_S) support.h kbdtest.c
+@OR1K_EXCEPT_FALSE@kbdtest_SOURCES =
+@OR1K_EXCEPT_TRUE@kbdtest_LDFLAGS = -T$(OR1K_SRCDIR)/default.ld
+
+###############################################
+@OR1K_EXCEPT_TRUE@SUBDIRS = support $(SUB_TESTS) $(OR1K_SUB_TESTS)
+@OR1K_EXCEPT_FALSE@SUBDIRS = support $(SUB_TESTS)
+
+@OR1K_EXCEPT_TRUE@OR1K_SUPPORT_S = except.S
+@OR1K_EXCEPT_FALSE@OR1K_SUPPORT_S =
+
+LDADD = support/libsupport.a
+LDFLAGS =
+TESTS_ENVIRONMENT = $(SHELL) ${top_srcdir}/test $(TESTS_ENV)
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = exit$(EXEEXT) cbasic$(EXEEXT) local_global$(EXEEXT) \
+ mul$(EXEEXT) mycompress$(EXEEXT) dhry$(EXEEXT) \
+ functest$(EXEEXT) mem_test$(EXEEXT) basic$(EXEEXT) \
+ cache$(EXEEXT) cfg$(EXEEXT) dmatest$(EXEEXT) eth$(EXEEXT) \
+ mmu$(EXEEXT) except_test$(EXEEXT) int_test$(EXEEXT) \
+ flag$(EXEEXT) fbtest$(EXEEXT) kbdtest$(EXEEXT) \
+ acv_uart$(EXEEXT) acv_gpio$(EXEEXT) mc_dram$(EXEEXT) \
+ mc_ssram$(EXEEXT) mc_async$(EXEEXT) mc_sync$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+@OR1K_EXCEPT_TRUE@am__objects_1 = except.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am__objects_1 =
+@OR1K_EXCEPT_TRUE@am_acv_gpio_OBJECTS = $(am__objects_1) \
+@OR1K_EXCEPT_TRUE@ acv_gpio.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_acv_gpio_OBJECTS =
+acv_gpio_OBJECTS = $(am_acv_gpio_OBJECTS)
+acv_gpio_LDADD = $(LDADD)
+acv_gpio_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_acv_uart_OBJECTS = $(am__objects_1) \
+@OR1K_EXCEPT_TRUE@ acv_uart.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_acv_uart_OBJECTS =
+acv_uart_OBJECTS = $(am_acv_uart_OBJECTS)
+acv_uart_LDADD = $(LDADD)
+acv_uart_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_basic_OBJECTS = basic.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_basic_OBJECTS =
+basic_OBJECTS = $(am_basic_OBJECTS)
+@OR1K_EXCEPT_TRUE@basic_DEPENDENCIES =
+@OR1K_EXCEPT_FALSE@basic_DEPENDENCIES =
+@OR1K_EXCEPT_TRUE@am_cache_OBJECTS = cache.$(OBJEXT) cache_asm.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_cache_OBJECTS =
+cache_OBJECTS = $(am_cache_OBJECTS)
+cache_LDADD = $(LDADD)
+cache_DEPENDENCIES = support/libsupport.a
+am_cbasic_OBJECTS = $(am__objects_1) cbasic.$(OBJEXT)
+cbasic_OBJECTS = $(am_cbasic_OBJECTS)
+cbasic_LDADD = $(LDADD)
+cbasic_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_cfg_OBJECTS = cfg.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_cfg_OBJECTS =
+cfg_OBJECTS = $(am_cfg_OBJECTS)
+@OR1K_EXCEPT_TRUE@cfg_DEPENDENCIES =
+@OR1K_EXCEPT_FALSE@cfg_DEPENDENCIES =
+am_dhry_OBJECTS = $(am__objects_1) dhry.$(OBJEXT)
+dhry_OBJECTS = $(am_dhry_OBJECTS)
+dhry_LDADD = $(LDADD)
+dhry_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_dmatest_OBJECTS = $(am__objects_1) \
+@OR1K_EXCEPT_TRUE@ dmatest.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_dmatest_OBJECTS =
+dmatest_OBJECTS = $(am_dmatest_OBJECTS)
+dmatest_LDADD = $(LDADD)
+dmatest_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_eth_OBJECTS = $(am__objects_1) eth.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_eth_OBJECTS =
+eth_OBJECTS = $(am_eth_OBJECTS)
+eth_LDADD = $(LDADD)
+eth_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_except_test_OBJECTS = except_test_s.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ except_test.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_except_test_OBJECTS =
+except_test_OBJECTS = $(am_except_test_OBJECTS)
+except_test_LDADD = $(LDADD)
+except_test_DEPENDENCIES = support/libsupport.a
+am_exit_OBJECTS = $(am__objects_1) exit.$(OBJEXT)
+exit_OBJECTS = $(am_exit_OBJECTS)
+exit_LDADD = $(LDADD)
+exit_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_fbtest_OBJECTS = $(am__objects_1) fbtest.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_fbtest_OBJECTS =
+fbtest_OBJECTS = $(am_fbtest_OBJECTS)
+fbtest_LDADD = $(LDADD)
+fbtest_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_flag_OBJECTS = flag.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_flag_OBJECTS =
+flag_OBJECTS = $(am_flag_OBJECTS)
+@OR1K_EXCEPT_TRUE@flag_DEPENDENCIES =
+@OR1K_EXCEPT_FALSE@flag_DEPENDENCIES =
+am_functest_OBJECTS = $(am__objects_1) functest.$(OBJEXT)
+functest_OBJECTS = $(am_functest_OBJECTS)
+functest_LDADD = $(LDADD)
+functest_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_int_test_OBJECTS = int_test.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_int_test_OBJECTS =
+int_test_OBJECTS = $(am_int_test_OBJECTS)
+int_test_LDADD = $(LDADD)
+int_test_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_kbdtest_OBJECTS = $(am__objects_1) \
+@OR1K_EXCEPT_TRUE@ kbdtest.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_kbdtest_OBJECTS =
+kbdtest_OBJECTS = $(am_kbdtest_OBJECTS)
+kbdtest_LDADD = $(LDADD)
+kbdtest_DEPENDENCIES = support/libsupport.a
+am_local_global_OBJECTS = $(am__objects_1) local_global.$(OBJEXT)
+local_global_OBJECTS = $(am_local_global_OBJECTS)
+local_global_LDADD = $(LDADD)
+local_global_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_mc_async_OBJECTS = except_mc.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ mc_common.$(OBJEXT) mc_async.$(OBJEXT)
+mc_async_OBJECTS = $(am_mc_async_OBJECTS)
+mc_async_LDADD = $(LDADD)
+mc_async_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_mc_dram_OBJECTS = except_mc.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ mc_common.$(OBJEXT) mc_dram.$(OBJEXT)
+mc_dram_OBJECTS = $(am_mc_dram_OBJECTS)
+mc_dram_LDADD = $(LDADD)
+mc_dram_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_mc_ssram_OBJECTS = except_mc.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ mc_common.$(OBJEXT) mc_ssram.$(OBJEXT)
+mc_ssram_OBJECTS = $(am_mc_ssram_OBJECTS)
+mc_ssram_LDADD = $(LDADD)
+mc_ssram_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_mc_sync_OBJECTS = except_mc.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ mc_common.$(OBJEXT) mc_sync.$(OBJEXT)
+mc_sync_OBJECTS = $(am_mc_sync_OBJECTS)
+mc_sync_LDADD = $(LDADD)
+mc_sync_DEPENDENCIES = support/libsupport.a
+am_mem_test_OBJECTS = $(am__objects_1) mem_test.$(OBJEXT)
+mem_test_OBJECTS = $(am_mem_test_OBJECTS)
+mem_test_LDADD = $(LDADD)
+mem_test_DEPENDENCIES = support/libsupport.a
+@OR1K_EXCEPT_TRUE@am_mmu_OBJECTS = $(am__objects_1) mmu.$(OBJEXT) \
+@OR1K_EXCEPT_TRUE@ mmu_asm.$(OBJEXT)
+@OR1K_EXCEPT_FALSE@am_mmu_OBJECTS =
+mmu_OBJECTS = $(am_mmu_OBJECTS)
+mmu_LDADD = $(LDADD)
+mmu_DEPENDENCIES = support/libsupport.a
+am_mul_OBJECTS = $(am__objects_1) mul.$(OBJEXT)
+mul_OBJECTS = $(am_mul_OBJECTS)
+mul_LDADD = $(LDADD)
+mul_DEPENDENCIES = support/libsupport.a
+am_mycompress_OBJECTS = $(am__objects_1) mycompress.$(OBJEXT)
+mycompress_OBJECTS = $(am_mycompress_OBJECTS)
+mycompress_LDADD = $(LDADD)
+mycompress_DEPENDENCIES = support/libsupport.a
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES = -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/acv_gpio.Po ./$(DEPDIR)/acv_uart.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/cache.Po ./$(DEPDIR)/cbasic.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/dhry.Po ./$(DEPDIR)/dmatest.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/eth.Po ./$(DEPDIR)/except_test.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/exit.Po ./$(DEPDIR)/fbtest.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/functest.Po ./$(DEPDIR)/kbdtest.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/local_global.Po ./$(DEPDIR)/mc_async.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/mc_common.Po ./$(DEPDIR)/mc_dram.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/mc_ssram.Po ./$(DEPDIR)/mc_sync.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/mem_test.Po ./$(DEPDIR)/mmu.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/mul.Po ./$(DEPDIR)/mycompress.Po
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+DIST_SOURCES = $(acv_gpio_SOURCES) $(acv_uart_SOURCES) $(basic_SOURCES) \
+ $(cache_SOURCES) $(cbasic_SOURCES) $(cfg_SOURCES) \
+ $(dhry_SOURCES) $(dmatest_SOURCES) $(eth_SOURCES) \
+ $(except_test_SOURCES) $(exit_SOURCES) $(fbtest_SOURCES) \
+ $(flag_SOURCES) $(functest_SOURCES) $(int_test_SOURCES) \
+ $(kbdtest_SOURCES) $(local_global_SOURCES) $(mc_async_SOURCES) \
+ $(mc_dram_SOURCES) $(mc_ssram_SOURCES) $(mc_sync_SOURCES) \
+ $(mem_test_SOURCES) $(mmu_SOURCES) $(mul_SOURCES) \
+ $(mycompress_SOURCES)
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+ uninstall-info-recursive all-recursive install-data-recursive \
+ install-exec-recursive installdirs-recursive install-recursive \
+ uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = README ../config.guess ../config.sub ../depcomp \
+ ../install-sh ../missing ../mkinstalldirs COPYING Makefile.am \
+ Makefile.in TODO aclocal.m4 config.sub configure configure.in
+DIST_SUBDIRS = support uos
+SOURCES = $(acv_gpio_SOURCES) $(acv_uart_SOURCES) $(basic_SOURCES) $(cache_SOURCES) $(cbasic_SOURCES) $(cfg_SOURCES) $(dhry_SOURCES) $(dmatest_SOURCES) $(eth_SOURCES) $(except_test_SOURCES) $(exit_SOURCES) $(fbtest_SOURCES) $(flag_SOURCES) $(functest_SOURCES) $(int_test_SOURCES) $(kbdtest_SOURCES) $(local_global_SOURCES) $(mc_async_SOURCES) $(mc_dram_SOURCES) $(mc_ssram_SOURCES) $(mc_sync_SOURCES) $(mem_test_SOURCES) $(mmu_SOURCES) $(mul_SOURCES) $(mycompress_SOURCES)
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .S .c .o .obj
+
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4): configure.in
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+ rm -f $(DESTDIR)$(bindir)/$$f; \
+ done
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+acv_gpio$(EXEEXT): $(acv_gpio_OBJECTS) $(acv_gpio_DEPENDENCIES)
+ @rm -f acv_gpio$(EXEEXT)
+ $(LINK) $(acv_gpio_LDFLAGS) $(acv_gpio_OBJECTS) $(acv_gpio_LDADD) $(LIBS)
+acv_uart$(EXEEXT): $(acv_uart_OBJECTS) $(acv_uart_DEPENDENCIES)
+ @rm -f acv_uart$(EXEEXT)
+ $(LINK) $(acv_uart_LDFLAGS) $(acv_uart_OBJECTS) $(acv_uart_LDADD) $(LIBS)
+basic$(EXEEXT): $(basic_OBJECTS) $(basic_DEPENDENCIES)
+ @rm -f basic$(EXEEXT)
+ $(LINK) $(basic_LDFLAGS) $(basic_OBJECTS) $(basic_LDADD) $(LIBS)
+cache$(EXEEXT): $(cache_OBJECTS) $(cache_DEPENDENCIES)
+ @rm -f cache$(EXEEXT)
+ $(LINK) $(cache_LDFLAGS) $(cache_OBJECTS) $(cache_LDADD) $(LIBS)
+cbasic$(EXEEXT): $(cbasic_OBJECTS) $(cbasic_DEPENDENCIES)
+ @rm -f cbasic$(EXEEXT)
+ $(LINK) $(cbasic_LDFLAGS) $(cbasic_OBJECTS) $(cbasic_LDADD) $(LIBS)
+cfg$(EXEEXT): $(cfg_OBJECTS) $(cfg_DEPENDENCIES)
+ @rm -f cfg$(EXEEXT)
+ $(LINK) $(cfg_LDFLAGS) $(cfg_OBJECTS) $(cfg_LDADD) $(LIBS)
+dhry$(EXEEXT): $(dhry_OBJECTS) $(dhry_DEPENDENCIES)
+ @rm -f dhry$(EXEEXT)
+ $(LINK) $(dhry_LDFLAGS) $(dhry_OBJECTS) $(dhry_LDADD) $(LIBS)
+dmatest$(EXEEXT): $(dmatest_OBJECTS) $(dmatest_DEPENDENCIES)
+ @rm -f dmatest$(EXEEXT)
+ $(LINK) $(dmatest_LDFLAGS) $(dmatest_OBJECTS) $(dmatest_LDADD) $(LIBS)
+eth$(EXEEXT): $(eth_OBJECTS) $(eth_DEPENDENCIES)
+ @rm -f eth$(EXEEXT)
+ $(LINK) $(eth_LDFLAGS) $(eth_OBJECTS) $(eth_LDADD) $(LIBS)
+except_test$(EXEEXT): $(except_test_OBJECTS) $(except_test_DEPENDENCIES)
+ @rm -f except_test$(EXEEXT)
+ $(LINK) $(except_test_LDFLAGS) $(except_test_OBJECTS) $(except_test_LDADD) $(LIBS)
+exit$(EXEEXT): $(exit_OBJECTS) $(exit_DEPENDENCIES)
+ @rm -f exit$(EXEEXT)
+ $(LINK) $(exit_LDFLAGS) $(exit_OBJECTS) $(exit_LDADD) $(LIBS)
+fbtest$(EXEEXT): $(fbtest_OBJECTS) $(fbtest_DEPENDENCIES)
+ @rm -f fbtest$(EXEEXT)
+ $(LINK) $(fbtest_LDFLAGS) $(fbtest_OBJECTS) $(fbtest_LDADD) $(LIBS)
+flag$(EXEEXT): $(flag_OBJECTS) $(flag_DEPENDENCIES)
+ @rm -f flag$(EXEEXT)
+ $(LINK) $(flag_LDFLAGS) $(flag_OBJECTS) $(flag_LDADD) $(LIBS)
+functest$(EXEEXT): $(functest_OBJECTS) $(functest_DEPENDENCIES)
+ @rm -f functest$(EXEEXT)
+ $(LINK) $(functest_LDFLAGS) $(functest_OBJECTS) $(functest_LDADD) $(LIBS)
+int_test$(EXEEXT): $(int_test_OBJECTS) $(int_test_DEPENDENCIES)
+ @rm -f int_test$(EXEEXT)
+ $(LINK) $(int_test_LDFLAGS) $(int_test_OBJECTS) $(int_test_LDADD) $(LIBS)
+kbdtest$(EXEEXT): $(kbdtest_OBJECTS) $(kbdtest_DEPENDENCIES)
+ @rm -f kbdtest$(EXEEXT)
+ $(LINK) $(kbdtest_LDFLAGS) $(kbdtest_OBJECTS) $(kbdtest_LDADD) $(LIBS)
+local_global$(EXEEXT): $(local_global_OBJECTS) $(local_global_DEPENDENCIES)
+ @rm -f local_global$(EXEEXT)
+ $(LINK) $(local_global_LDFLAGS) $(local_global_OBJECTS) $(local_global_LDADD) $(LIBS)
+mc_async$(EXEEXT): $(mc_async_OBJECTS) $(mc_async_DEPENDENCIES)
+ @rm -f mc_async$(EXEEXT)
+ $(LINK) $(mc_async_LDFLAGS) $(mc_async_OBJECTS) $(mc_async_LDADD) $(LIBS)
+mc_dram$(EXEEXT): $(mc_dram_OBJECTS) $(mc_dram_DEPENDENCIES)
+ @rm -f mc_dram$(EXEEXT)
+ $(LINK) $(mc_dram_LDFLAGS) $(mc_dram_OBJECTS) $(mc_dram_LDADD) $(LIBS)
+mc_ssram$(EXEEXT): $(mc_ssram_OBJECTS) $(mc_ssram_DEPENDENCIES)
+ @rm -f mc_ssram$(EXEEXT)
+ $(LINK) $(mc_ssram_LDFLAGS) $(mc_ssram_OBJECTS) $(mc_ssram_LDADD) $(LIBS)
+mc_sync$(EXEEXT): $(mc_sync_OBJECTS) $(mc_sync_DEPENDENCIES)
+ @rm -f mc_sync$(EXEEXT)
+ $(LINK) $(mc_sync_LDFLAGS) $(mc_sync_OBJECTS) $(mc_sync_LDADD) $(LIBS)
+mem_test$(EXEEXT): $(mem_test_OBJECTS) $(mem_test_DEPENDENCIES)
+ @rm -f mem_test$(EXEEXT)
+ $(LINK) $(mem_test_LDFLAGS) $(mem_test_OBJECTS) $(mem_test_LDADD) $(LIBS)
+mmu$(EXEEXT): $(mmu_OBJECTS) $(mmu_DEPENDENCIES)
+ @rm -f mmu$(EXEEXT)
+ $(LINK) $(mmu_LDFLAGS) $(mmu_OBJECTS) $(mmu_LDADD) $(LIBS)
+mul$(EXEEXT): $(mul_OBJECTS) $(mul_DEPENDENCIES)
+ @rm -f mul$(EXEEXT)
+ $(LINK) $(mul_LDFLAGS) $(mul_OBJECTS) $(mul_LDADD) $(LIBS)
+mycompress$(EXEEXT): $(mycompress_OBJECTS) $(mycompress_DEPENDENCIES)
+ @rm -f mycompress$(EXEEXT)
+ $(LINK) $(mycompress_LDFLAGS) $(mycompress_OBJECTS) $(mycompress_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/acv_gpio.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/acv_uart.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cbasic.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dhry.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dmatest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eth.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/except_test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/exit.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fbtest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/functest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kbdtest.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/local_global.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc_async.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc_common.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc_dram.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc_ssram.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc_sync.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mem_test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mmu.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mul.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mycompress.Po@am__quote@
+
+distclean-depend:
+ -rm -rf ./$(DEPDIR)
+
+.S.o:
+ $(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.S.obj:
+ $(CCASCOMPILE) -c `cygpath -w $<`
+
+.c.o:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+distdir = $(PACKAGE)-$(VERSION)
+
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+
+GZIP_ENV = --best
+distcleancheck_listfiles = find . -type f -print
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkinstalldirs) $(distdir)/..
+ @list='$(DISTFILES)'; for file in $$list; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" \
+ distdir=../$(distdir)/$$subdir \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ $(am__remove_distdir)
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \
+ && cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ find $$dc_install_base -type f -print ; \
+ exit 1; } >&2 ) \
+ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \
+ && rm -f $(distdir).tar.gz \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @echo "$(distdir).tar.gz is ready for distribution" | \
+ sed 'h;s/./=/g;p;x;p;x'
+distcleancheck: distclean
+ if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+distclean-am: clean-am distclean-compile distclean-depend \
+ distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf autom4te.cache
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-TESTS check-am \
+ clean clean-binPROGRAMS clean-generic clean-recursive dist \
+ dist-all dist-gzip distcheck distclean distclean-compile \
+ distclean-depend distclean-generic distclean-recursive \
+ distclean-tags distcleancheck distdir dvi dvi-am dvi-recursive \
+ info info-am info-recursive install install-am \
+ install-binPROGRAMS install-data install-data-am \
+ install-data-recursive install-exec install-exec-am \
+ install-exec-recursive install-info install-info-am \
+ install-info-recursive install-man install-recursive \
+ install-strip installcheck installcheck-am installdirs \
+ installdirs-am installdirs-recursive maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-recursive \
+ tags tags-recursive uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-info-am \
+ uninstall-info-recursive uninstall-recursive
+
+
+again: clean all
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Makefile.in
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: uos/Makefile.in
===================================================================
--- uos/Makefile.in (nonexistent)
+++ uos/Makefile.in (revision 1765)
@@ -0,0 +1,357 @@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+DEPDIR = @DEPDIR@
+INCLUDES = @INCLUDES@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+MAKE_SHELL = @MAKE_SHELL@
+OR1K_SRCDIR = @OR1K_SRCDIR@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+SIM = @SIM@
+STRIP = @STRIP@
+TESTS_ENV = @TESTS_ENV@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+LDADD = ../support/libsupport.a
+LDFLAGS = -T${top_srcdir}/default.ld
+
+bin_PROGRAMS = uos
+uos_SOURCES = except_or32.S support.h spr_defs.h task.c int.h ipc.h tick.c uos.h uos.c
+subdir = uos
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = uos$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+am_uos_OBJECTS = except_or32.$(OBJEXT) task.$(OBJEXT) tick.$(OBJEXT) \
+ uos.$(OBJEXT)
+uos_OBJECTS = $(am_uos_OBJECTS)
+uos_LDADD = $(LDADD)
+uos_DEPENDENCIES = ../support/libsupport.a
+uos_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES = -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/task.Po ./$(DEPDIR)/tick.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/uos.Po
+CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+DIST_SOURCES = $(uos_SOURCES)
+DIST_COMMON = README Makefile.am Makefile.in
+SOURCES = $(uos_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .S .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu uos/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \
+ $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+ rm -f $(DESTDIR)$(bindir)/$$f; \
+ done
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+uos$(EXEEXT): $(uos_OBJECTS) $(uos_DEPENDENCIES)
+ @rm -f uos$(EXEEXT)
+ $(LINK) $(uos_LDFLAGS) $(uos_OBJECTS) $(uos_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/task.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tick.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/uos.Po@am__quote@
+
+distclean-depend:
+ -rm -rf ./$(DEPDIR)
+
+.S.o:
+ $(CCASCOMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.S.obj:
+ $(CCASCOMPILE) -c `cygpath -w $<`
+
+.c.o:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @list='$(DISTFILES)'; for file in $$list; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+ distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic distclean distclean-compile distclean-depend \
+ distclean-generic distclean-tags distdir dvi dvi-am info \
+ info-am install install-am install-binPROGRAMS install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic tags uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-info-am
+
+
+again: clean all
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: uos/task.c
===================================================================
--- uos/task.c (nonexistent)
+++ uos/task.c (revision 1765)
@@ -0,0 +1,54 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2000 Damjan Lampret, lampret@opencores.org */
+
+#include "support.h"
+#include "uos.h"
+#include "ipc.h"
+#include "int.h"
+
+extern struct tcb tasks[MAX_TASKS+1];
+
+int task(int id)
+{
+ int rc;
+ struct _msg {
+ char id;
+ unsigned long count;
+ } msg;
+
+ printf("Task %d started\n", id);
+
+ if(id == 1) {
+ msg.id = 1;
+ msg.count = 0;
+ uos_msgsnd(2, (char *)&msg, sizeof(msg));
+ }
+
+ for(;;) {
+ rc = uos_msgrcv(0, (char *)&msg, sizeof(msg));
+
+ if(rc != 0) {
+ printf("Task %d: Waiting for massage\n", id);
+ } else {
+ printf("Task %d: Got massage from task %d: 0x%.8x. Sending message to task %d: 0x%.8x \n", id, msg.id, (int)msg.count, (id == 3 ? 1 : (id + 1)), (int)(msg.count + 1));
+ msg.id = id;
+
+ if((id == 1) && (msg.count > 15)) {
+ report(msg.count + 0xdeadde9c);
+ exit(0);
+ }
+
+ msg.count += 1;
+ uos_msgsnd((id == 3 ? 1 : (id + 1)), (char *)&msg, sizeof(msg));
+ }
+ }
+}
+
+/* Called by kernel_init to collect all tasks entries. */
+void tasks_entries()
+{
+ tasks[1].regs.pc = (unsigned long)task;
+ tasks[2].regs.pc = (unsigned long)task;
+ tasks[3].regs.pc = (unsigned long)task;
+}
+
Index: uos/uos.c
===================================================================
--- uos/uos.c (nonexistent)
+++ uos/uos.c (revision 1765)
@@ -0,0 +1,314 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2000 Damjan Lampret, lampret@opencores.org */
+
+#include "support.h"
+#include "spr_defs.h"
+#include "uos.h"
+#include "ipc.h"
+#include "int.h"
+
+/* External functions prototypes */
+int tick_init(unsigned long period, void (* inf)(void));
+
+/* Pointers to contexts used by except_or32.S routines */
+unsigned long *task_context;
+unsigned long *kernel_context;
+
+/* TCBs for all tasks in the system */
+struct tcb tasks[MAX_TASKS+1];
+
+/* Stacks for the tasks (stacks[0] is kernel stack) */
+unsigned char stacks[MAX_TASKS+1][STACK_SIZE];
+
+/* MCBs for IPC messages */
+struct mcb msgs[MAX_MSGS];
+
+/* Pointer to linked list of free MCBs. */
+struct mcb *free_mcbs;
+
+/* TID of the current user task */
+tid_t curtask = 0;
+
+/* Statistics */
+int kernel_sched_cnt = 0;
+int kernel_syscall_cnt = 0;
+
+/* Timestamp via or1ksim (CPU cycle number). */
+unsigned long timestamp()
+{
+ register unsigned long cycles asm("r3");
+ asm("l.sys 201");
+ return cycles;
+}
+
+/* Standard function for filling memory with a constant byte. */
+void *memset(void *dst, int c, size_t size)
+{
+ char *tmp = dst;
+
+ for(;tmp && (tmp < (char *)dst + size); tmp++)
+ *(char *)tmp = (char)c;
+
+ return dst;
+}
+
+/* Traverse linked list of MCBs and show individual messages. */
+void kernel_show_mcbs(struct mcb *mcb)
+{
+ for(;mcb; mcb = mcb->next) {
+ printf("MCB len=%u origintask=%u ", mcb->length, mcb->origin);
+ printf("msg:%s\n", mcb->msg);
+ }
+}
+
+/* Show all contexts. */
+void kernel_show_contexts()
+{
+ int i;
+ tid_t t;
+
+ for(t = 1; t <= MAX_TASKS; t++) {
+ printf("\ntask TID=%d: PC=0x%x ", t, (unsigned)tasks[t].regs.pc & ~0x3);
+ printf("SP(r1)=0x%x ", (unsigned)tasks[t].regs.sp);
+ printf("SR[IEE]=%d\n", (unsigned)tasks[t].regs.sr & SPR_SR_IEE);
+ printf("SR[TEE]=%d\n", (unsigned)tasks[t].regs.sr & SPR_SR_TEE);
+ printf("SR[SM]=%d\n", (unsigned)tasks[t].regs.sr & SPR_SR_SM);
+ for(i = 1; i < GPRS; i++) {
+ if (i % 4 == 0)
+ printf("\n");
+ printf("r%d=0x%.8x ", i, (unsigned)tasks[t].regs.gprs[i]);
+ }
+ printf("\n");
+ kernel_show_mcbs(tasks[t].waiting_msgs);
+ }
+ printf("\n");
+}
+
+/* Simple round-robin scheduler that directly calls dispatcher. It is
+ called by low level external interrupt exception handler or by
+ kernel_syscall if KERNEL_SYSCALL_SCHED is defined. */
+void kernel_sched()
+{
+ if ((++curtask > MAX_TASKS) || !(tasks[curtask].regs.pc & ~0x3))
+ curtask = 1;
+ task_context = (unsigned long *)&tasks[curtask].regs;
+
+#if KERNEL_OUTPUT
+ printf("kernel_sched(): entry number %d, ", ++kernel_sched_cnt);
+ printf("dispatching task TID=%d, time %u cycles", curtask, timestamp());
+
+ kernel_show_contexts();
+#endif
+
+ dispatch();
+}
+
+/* System call uos_msgsnd. */
+int uos_msgsnd(tid_t desttask, char *buf, int len)
+{
+ asm("l.sys 1");
+ asm("l.nop");
+}
+
+/* System call uos_msgrcv. */
+int uos_msgrcv(tid_t origintask, char *buf, int len)
+{
+ asm("l.sys 2");
+ asm("l.nop");
+}
+
+/* Handles system call uos_msgsnd. */
+void kernel_msgsnd(tid_t tid)
+{
+ struct mcb *mcb;
+ struct mcb **dstmq;
+ struct tcb *task;
+
+ task = &tasks[tid];
+
+ /* Sanity checks. */
+
+ /* Does destination task exist? */
+ if (!task->regs.gprs[1] || (task->regs.gprs[1] > MAX_TASKS)) {
+ task->regs.gprs[9] = IPC_ENOTASK;
+ return;
+ }
+
+ /* Are there any free MCBs? */
+ if (!free_mcbs) {
+ task->regs.gprs[9] = IPC_EOUTOFMCBS;
+ return;
+ }
+
+ /* Is message too big to fit into MCB's message buffer? */
+ if (task->regs.gprs[3] > MAX_MSGLEN) {
+ task->regs.gprs[9] = IPC_ETOOBIG;
+ return;
+ }
+
+ /* OK, send the message. */
+
+ /* First, allocate MCB. */
+ mcb = free_mcbs;
+ free_mcbs = mcb->next;
+
+ /* Second, copy message to the MCB. */
+ memcpy(mcb->msg, (void *)task->regs.gprs[2], task->regs.gprs[3]);
+ mcb->origin = tid;
+ mcb->length = task->regs.gprs[3];
+ mcb->next = NULL;
+
+ /* Insert MCB into destination task's message queue at
+ the end. */
+ dstmq = &tasks[task->regs.gprs[1]].waiting_msgs;
+ for(;*dstmq;)
+ dstmq = &((*dstmq)->next);
+ *dstmq = mcb;
+
+ task->regs.gprs[9] = IPC_NOERR;
+ return;
+}
+
+/* Handles system call uos_msgrcv. */
+void kernel_msgrcv(tid_t tid)
+{
+ struct mcb *mcb;
+ struct mcb *curmsg, **linkp;
+ struct tcb *task;
+
+ task = &tasks[tid];
+
+ /* Sanity checks. */
+
+ /* Does origin task exist? */
+ if (task->regs.gprs[1] > MAX_TASKS) {
+ task->regs.gprs[9] = IPC_ENOTASK;
+ return;
+ }
+
+ /* Are there any messages waiting for reception? */
+ if (!task->waiting_msgs) {
+ task->regs.gprs[9] = IPC_ENOMSGS;
+ return;
+ }
+
+ /* OK, receive the message. */
+
+ /* Search waiting messages for one coming from origintask. If
+ origintask is zero then grab the first message. */
+ curmsg = task->waiting_msgs;
+ linkp = &task->waiting_msgs;
+ for(;task->regs.gprs[1] && curmsg->next && curmsg->origin != task->regs.gprs[1];) {
+ linkp = &curmsg->next;
+ curmsg = curmsg->next;
+ }
+
+ /* Is receive buffer too small for receiving message? */
+ if (task->regs.gprs[3] < curmsg->length) {
+ task->regs.gprs[9] = IPC_ETOOBIG;
+ return;
+ }
+
+ /* Now copy the message from the MCB. */
+ memcpy((void *)task->regs.gprs[2], curmsg->msg, task->regs.gprs[3]);
+
+ /* Remove MCB from task's waiting queue and place it
+ back into free MCBs queue. */
+ *linkp = curmsg->next;
+ curmsg->next = free_mcbs;
+ free_mcbs = curmsg;
+
+ task->regs.gprs[9] = IPC_NOERR;
+ return;
+}
+
+/* Handles all uOS system calls. It is called by low level system call
+ exception handler. */
+void kernel_syscall()
+{
+ unsigned short syscall_num;
+
+#if KERNEL_OUTPUT
+ printf("kernel_syscall(): entry number %d, ", ++kernel_syscall_cnt);
+ printf("current TID=%d, time %u cycles", curtask, timestamp());
+
+ kernel_show_contexts();
+#endif
+ syscall_num = *(unsigned short *)((tasks[curtask].regs.pc & ~0x3) - 6);
+
+ switch(syscall_num) {
+ case IPC_MSGSND:
+ kernel_msgsnd(curtask);
+ break;
+ case IPC_MSGRCV:
+ kernel_msgrcv(curtask);
+ break;
+ default:
+ printf("kernel_syscall(): unknown syscall (%u)\n", syscall_num);
+ }
+
+#if KERNEL_SYSCALL_SCHED
+ kernel_sched();
+#endif
+ dispatch();
+}
+
+/* Called by reset exception handler to initialize the kernel and start
+ rolling first task. */
+int kernel_init()
+{
+ tid_t t;
+ int i;
+
+ printf("Initializing kernel:\n");
+
+ printf(" Clearing kernel structures...\n");
+ memset(tasks, 0, sizeof(tasks));
+ memset(stacks, 0, sizeof(stacks));
+ memset(msgs, 0, sizeof(msgs));
+
+ printf(" Initializing MCBs... %d MCB(s)\n", MAX_MSGS);
+ for(i = 0; i < (MAX_MSGS - 1); i++)
+ msgs[i].next = &msgs[i+1];
+ free_mcbs = &msgs[0];
+
+ printf(" Initializing TCBs... %d user task(s)\n", MAX_TASKS);
+
+ tasks_entries();
+
+ for(t = 0; t <= MAX_TASKS; t++) {
+ tasks[t].regs.sp = (unsigned long)stacks[t] + STACK_SIZE - 4;
+ /* Disable EXR for kernel context */
+ tasks[t].regs.sr |= (t == 0 ? SPR_SR_SM : SPR_SR_TEE | SPR_SR_IEE);
+ tasks[t].regs.gprs[1] = t;
+ }
+
+ /* First task runs in seprvisor mode */
+ tasks[1].regs.sr |= SPR_SR_SM;
+
+ /* TID=0 is reserved for kernel use */
+ kernel_context = (unsigned long *)&tasks[0].regs;
+
+ /* First task to be scheduled is task TID=1 */
+ task_context = (unsigned long *)&tasks[1].regs;
+
+ /* Initialize initrrupt controller */
+ int_init();
+
+ printf(" Exceptions will be enabled when first task is dispatched.\n");
+ printf("Kernel initalized. Starting first user task.\n");
+
+#if KERNEL_SYSCALL_SCHED
+ kernel_sched(); /* Lets schedule and dispatch our first task */
+#else
+ tick_init(TICK_PERIOD, kernel_sched);
+ kernel_sched(); /* Lets schedule and dispatch our first task */
+#endif
+ /* ... */ /* We never get here */
+}
+
+int main ()
+{
+ kernel_init();
+ return 0;
+}
Index: uos/spr_defs.h
===================================================================
--- uos/spr_defs.h (nonexistent)
+++ uos/spr_defs.h (revision 1765)
@@ -0,0 +1,428 @@
+/* spr_defs.h -- Defines OR1K architecture specific special-purpose registers
+ Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* This file is also used by microkernel test bench. Among
+others it is also used in assembly file(s). */
+
+/* Definition of special-purpose registers (SPRs) */
+
+#define MAX_GRPS (32)
+#define MAX_SPRS_PER_GRP_BITS (11)
+#define MAX_SPRS_PER_GRP (1 << MAX_SPRS_PER_GRP_BITS)
+#define MAX_SPRS (0x10000)
+
+/* Base addresses for the groups */
+#define SPRGROUP_SYS (0<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DMMU (1<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IMMU (2<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_DC (3<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_IC (4<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_MAC (5<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_D (6<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PC (7<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PM (8<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_PIC (9<< MAX_SPRS_PER_GRP_BITS)
+#define SPRGROUP_TT (10<< MAX_SPRS_PER_GRP_BITS)
+
+/* System control and status group */
+#define SPR_VR (SPRGROUP_SYS + 0)
+#define SPR_UPR (SPRGROUP_SYS + 1)
+#define SPR_CPUCFGR (SPRGROUP_SYS + 2)
+#define SPR_DMMUCFGR (SPRGROUP_SYS + 3)
+#define SPR_IMMUCFGR (SPRGROUP_SYS + 4)
+#define SPR_DCCFGR (SPRGROUP_SYS + 5)
+#define SPR_ICCFGR (SPRGROUP_SYS + 6)
+#define SPR_DCFGR (SPRGROUP_SYS + 7)
+#define SPR_PCCFGR (SPRGROUP_SYS + 8)
+#define SPR_NPC (SPRGROUP_SYS + 16) /* CZ 21/06/01 */
+#define SPR_SR (SPRGROUP_SYS + 17) /* CZ 21/06/01 */
+#define SPR_PPC (SPRGROUP_SYS + 18) /* CZ 21/06/01 */
+#define SPR_EPCR_BASE (SPRGROUP_SYS + 32) /* CZ 21/06/01 */
+#define SPR_EPCR_LAST (SPRGROUP_SYS + 47) /* CZ 21/06/01 */
+#define SPR_EEAR_BASE (SPRGROUP_SYS + 48)
+#define SPR_EEAR_LAST (SPRGROUP_SYS + 63)
+#define SPR_ESR_BASE (SPRGROUP_SYS + 64)
+#define SPR_ESR_LAST (SPRGROUP_SYS + 79)
+
+/* Data MMU group */
+#define SPR_DMMUCR (SPRGROUP_DMMU + 0)
+#define SPR_DTLBMR_BASE(WAY) (SPRGROUP_DMMU + 0x200 + (WAY) * 0x200)
+#define SPR_DTLBMR_LAST(WAY) (SPRGROUP_DMMU + 0x2ff + (WAY) * 0x200)
+#define SPR_DTLBTR_BASE(WAY) (SPRGROUP_DMMU + 0x300 + (WAY) * 0x200)
+#define SPR_DTLBTR_LAST(WAY) (SPRGROUP_DMMU + 0x3ff + (WAY) * 0x200)
+
+/* Instruction MMU group */
+#define SPR_IMMUCR (SPRGROUP_IMMU + 0)
+#define SPR_ITLBMR_BASE(WAY) (SPRGROUP_IMMU + 0x200 + (WAY) * 0x200)
+#define SPR_ITLBMR_LAST(WAY) (SPRGROUP_IMMU + 0x2ff + (WAY) * 0x200)
+#define SPR_ITLBTR_BASE(WAY) (SPRGROUP_IMMU + 0x300 + (WAY) * 0x200)
+#define SPR_ITLBTR_LAST(WAY) (SPRGROUP_IMMU + 0x3ff + (WAY) * 0x200)
+
+/* Data cache group */
+#define SPR_DCCR (SPRGROUP_DC + 0)
+#define SPR_DCBPR (SPRGROUP_DC + 1)
+#define SPR_DCBFR (SPRGROUP_DC + 2)
+#define SPR_DCBIR (SPRGROUP_DC + 3)
+#define SPR_DCBWR (SPRGROUP_DC + 4)
+#define SPR_DCBLR (SPRGROUP_DC + 5)
+#define SPR_DCR_BASE(WAY) (SPRGROUP_DC + 0x200 + (WAY) * 0x200)
+#define SPR_DCR_LAST(WAY) (SPRGROUP_DC + 0x3ff + (WAY) * 0x200)
+
+/* Instruction cache group */
+#define SPR_ICCR (SPRGROUP_IC + 0)
+#define SPR_ICBPR (SPRGROUP_IC + 1)
+#define SPR_ICBIR (SPRGROUP_IC + 2)
+#define SPR_ICBLR (SPRGROUP_IC + 3)
+#define SPR_ICR_BASE(WAY) (SPRGROUP_IC + 0x200 + (WAY) * 0x200)
+#define SPR_ICR_LAST(WAY) (SPRGROUP_IC + 0x3ff + (WAY) * 0x200)
+
+/* MAC group */
+#define SPR_MACLO (SPRGROUP_MAC + 1)
+#define SPR_MACHI (SPRGROUP_MAC + 2)
+
+/* Debug group */
+#define SPR_DVR(N) (SPRGROUP_D + (N))
+#define SPR_DCR(N) (SPRGROUP_D + 8 + (N))
+#define SPR_DMR1 (SPRGROUP_D + 16)
+#define SPR_DMR2 (SPRGROUP_D + 17)
+#define SPR_DWCR0 (SPRGROUP_D + 18)
+#define SPR_DWCR1 (SPRGROUP_D + 19)
+#define SPR_DSR (SPRGROUP_D + 20)
+#define SPR_DRR (SPRGROUP_D + 21)
+
+/* Performance counters group */
+#define SPR_PCCR(N) (SPRGROUP_PC + (N))
+#define SPR_PCMR(N) (SPRGROUP_PC + 8 + (N))
+
+/* Power management group */
+#define SPR_PMR (SPRGROUP_PM + 0)
+
+/* PIC group */
+#define SPR_PICMR (SPRGROUP_PIC + 0)
+#define SPR_PICPR (SPRGROUP_PIC + 1)
+#define SPR_PICSR (SPRGROUP_PIC + 2)
+
+/* Tick Timer group */
+#define SPR_TTMR (SPRGROUP_TT + 0)
+#define SPR_TTCR (SPRGROUP_TT + 1)
+
+/*
+ * Bit definitions for the Version Register
+ *
+ */
+#define SPR_VR_VER 0xffff0000 /* Processor version */
+#define SPR_VR_REV 0x0000003f /* Processor revision */
+
+/*
+ * Bit definitions for the Unit Present Register
+ *
+ */
+#define SPR_UPR_UP 0x00000001 /* UPR present */
+#define SPR_UPR_DCP 0x00000002 /* Data cache present */
+#define SPR_UPR_ICP 0x00000004 /* Instruction cache present */
+#define SPR_UPR_DMP 0x00000008 /* Data MMU present */
+#define SPR_UPR_IMP 0x00000010 /* Instruction MMU present */
+#define SPR_UPR_OB32P 0x00000020 /* ORBIS32 present */
+#define SPR_UPR_OB64P 0x00000040 /* ORBIS64 present */
+#define SPR_UPR_OF32P 0x00000080 /* ORFPX32 present */
+#define SPR_UPR_OF64P 0x00000100 /* ORFPX64 present */
+#define SPR_UPR_OV32P 0x00000200 /* ORVDX32 present */
+#define SPR_UPR_OV64P 0x00000400 /* ORVDX64 present */
+#define SPR_UPR_DUP 0x00000800 /* Debug unit present */
+#define SPR_UPR_PCUP 0x00001000 /* Performance counters unit present */
+#define SPR_UPR_PMP 0x00002000 /* Power management present */
+#define SPR_UPR_PICP 0x00004000 /* PIC present */
+#define SPR_UPR_TTP 0x00008000 /* Tick timer present */
+#define SPR_UPR_SRP 0x00010000 /* Shadow registers present */
+#define SPR_UPR_RES 0x00fe0000 /* ORVDX32 present */
+#define SPR_UPR_CUST 0xff000000 /* Custom units */
+
+/*
+ * Bit definitions for the Supervision Register
+ *
+ */
+#define SPR_SR_CID 0xf0000000 /* Context ID */
+#define SPR_SR_FO 0x00008000 /* Fixed one */
+#define SPR_SR_EPH 0x00004000 /* Exception Prefixi High */
+#define SPR_SR_DSX 0x00002000 /* Delay Slot Exception */
+#define SPR_SR_OVE 0x00001000 /* Overflow flag Exception */
+#define SPR_SR_OV 0x00000800 /* Overflow flag */
+#define SPR_SR_CY 0x00000400 /* Carry flag */
+#define SPR_SR_F 0x00000200 /* Condition Flag */
+#define SPR_SR_CE 0x00000100 /* CID Enable */
+#define SPR_SR_LEE 0x00000080 /* Little Endian Enable */
+#define SPR_SR_IME 0x00000040 /* Instruction MMU Enable */
+#define SPR_SR_DME 0x00000020 /* Data MMU Enable */
+#define SPR_SR_ICE 0x00000010 /* Instruction Cache Enable */
+#define SPR_SR_DCE 0x00000008 /* Data Cache Enable */
+#define SPR_SR_IEE 0x00000004 /* Interrupt Exception Enable */
+#define SPR_SR_TEE 0x00000002 /* Tick timer Exception Enable */
+#define SPR_SR_SM 0x00000001 /* Supervisor Mode */
+
+/*
+ * Bit definitions for the Data MMU Control Register
+ *
+ */
+#define SPR_DMMUCR_P2S 0x0000003e /* Level 2 Page Size */
+#define SPR_DMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
+#define SPR_DMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
+#define SPR_DMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Instruction MMU Control Register
+ *
+ */
+#define SPR_IMMUCR_P2S 0x0000003e /* Level 2 Page Size */
+#define SPR_IMMUCR_P1S 0x000007c0 /* Level 1 Page Size */
+#define SPR_IMMUCR_VADDR_WIDTH 0x0000f800 /* Virtual ADDR Width */
+#define SPR_IMMUCR_PADDR_WIDTH 0x000f0000 /* Physical ADDR Width */
+
+/*
+ * Bit definitions for the Data TLB Match Register
+ *
+ */
+#define SPR_DTLBMR_V 0x00000001 /* Valid */
+#define SPR_DTLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
+#define SPR_DTLBMR_CID 0x0000003c /* Context ID */
+#define SPR_DTLBMR_LRU 0x000000c0 /* Least Recently Used */
+#define SPR_DTLBMR_VPN 0xfffff000 /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Data TLB Translate Register
+ *
+ */
+#define SPR_DTLBTR_CC 0x00000001 /* Cache Coherency */
+#define SPR_DTLBTR_CI 0x00000002 /* Cache Inhibit */
+#define SPR_DTLBTR_WBC 0x00000004 /* Write-Back Cache */
+#define SPR_DTLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
+#define SPR_DTLBTR_A 0x00000010 /* Accessed */
+#define SPR_DTLBTR_D 0x00000020 /* Dirty */
+#define SPR_DTLBTR_URE 0x00000040 /* User Read Enable */
+#define SPR_DTLBTR_UWE 0x00000080 /* User Write Enable */
+#define SPR_DTLBTR_SRE 0x00000100 /* Supervisor Read Enable */
+#define SPR_DTLBTR_SWE 0x00000200 /* Supervisor Write Enable */
+#define SPR_DTLBTR_PPN 0xfffff000 /* Physical Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Match Register
+ *
+ */
+#define SPR_ITLBMR_V 0x00000001 /* Valid */
+#define SPR_ITLBMR_PL1 0x00000002 /* Page Level 1 (if 0 then PL2) */
+#define SPR_ITLBMR_CID 0x0000003c /* Context ID */
+#define SPR_ITLBMR_LRU 0x000000c0 /* Least Recently Used */
+#define SPR_ITLBMR_VPN 0xfffff000 /* Virtual Page Number */
+
+/*
+ * Bit definitions for the Instruction TLB Translate Register
+ *
+ */
+#define SPR_ITLBTR_CC 0x00000001 /* Cache Coherency */
+#define SPR_ITLBTR_CI 0x00000002 /* Cache Inhibit */
+#define SPR_ITLBTR_WBC 0x00000004 /* Write-Back Cache */
+#define SPR_ITLBTR_WOM 0x00000008 /* Weakly-Ordered Memory */
+#define SPR_ITLBTR_A 0x00000010 /* Accessed */
+#define SPR_ITLBTR_D 0x00000020 /* Dirty */
+#define SPR_ITLBTR_SXE 0x00000040 /* User Read Enable */
+#define SPR_ITLBTR_UXE 0x00000080 /* User Write Enable */
+#define SPR_ITLBTR_PPN 0xfffff000 /* Physical Page Number */
+
+/*
+ * Bit definitions for Data Cache Control register
+ *
+ */
+#define SPR_DCCR_EW 0x000000ff /* Enable ways */
+
+/*
+ * Bit definitions for Insn Cache Control register
+ *
+ */
+#define SPR_ICCR_EW 0x000000ff /* Enable ways */
+
+/*
+ * Bit definitions for Debug Control registers
+ *
+ */
+#define SPR_DCR_DP 0x00000001 /* DVR/DCR present */
+#define SPR_DCR_CC 0x0000000e /* Compare condition */
+#define SPR_DCR_SC 0x00000010 /* Signed compare */
+#define SPR_DCR_CT 0x000000e0 /* Compare to */
+
+/* Bit results with SPR_DCR_CC mask */
+#define SPR_DCR_CC_MASKED 0x00000000
+#define SPR_DCR_CC_EQUAL 0x00000001
+#define SPR_DCR_CC_LESS 0x00000002
+#define SPR_DCR_CC_LESSE 0x00000003
+#define SPR_DCR_CC_GREAT 0x00000004
+#define SPR_DCR_CC_GREATE 0x00000005
+#define SPR_DCR_CC_NEQUAL 0x00000006
+
+/* Bit results with SPR_DCR_CT mask */
+#define SPR_DCR_CT_DISABLED 0x00000000
+#define SPR_DCR_CT_IFEA 0x00000020
+#define SPR_DCR_CT_LEA 0x00000040
+#define SPR_DCR_CT_SEA 0x00000060
+#define SPR_DCR_CT_LD 0x00000080
+#define SPR_DCR_CT_SD 0x000000a0
+#define SPR_DCR_CT_LSEA 0x000000c0
+
+/*
+ * Bit definitions for Debug Mode 1 register
+ *
+ */
+#define SPR_DMR1_CW0 0x00000003 /* Chain watchpoint 0 */
+#define SPR_DMR1_CW1 0x0000000c /* Chain watchpoint 1 */
+#define SPR_DMR1_CW2 0x00000030 /* Chain watchpoint 2 */
+#define SPR_DMR1_CW3 0x000000c0 /* Chain watchpoint 3 */
+#define SPR_DMR1_CW4 0x00000300 /* Chain watchpoint 4 */
+#define SPR_DMR1_CW5 0x00000c00 /* Chain watchpoint 5 */
+#define SPR_DMR1_CW6 0x00003000 /* Chain watchpoint 6 */
+#define SPR_DMR1_CW7 0x0000c000 /* Chain watchpoint 7 */
+#define SPR_DMR1_CW8 0x00030000 /* Chain watchpoint 8 */
+#define SPR_DMR1_CW9 0x000c0000 /* Chain watchpoint 9 */
+#define SPR_DMR1_CW10 0x00300000 /* Chain watchpoint 10 */
+#define SPR_DMR1_ST 0x00400000 /* Single-step trace*/
+#define SPR_DMR1_BT 0x00800000 /* Branch trace */
+#define SPR_DMR1_DXFW 0x01000000 /* Disable external force watchpoint */
+
+/*
+ * Bit definitions for Debug Mode 2 register
+ *
+ */
+#define SPR_DMR2_WCE0 0x00000001 /* Watchpoint counter 0 enable */
+#define SPR_DMR2_WCE1 0x00000002 /* Watchpoint counter 0 enable */
+#define SPR_DMR2_AWTC 0x00001ffc /* Assign watchpoints to counters */
+#define SPR_DMR2_WGB 0x00ffe000 /* Watchpoints generating breakpoint */
+
+/*
+ * Bit definitions for Debug watchpoint counter registers
+ *
+ */
+#define SPR_DWCR_COUNT 0x0000ffff /* Count */
+#define SPR_DWCR_MATCH 0xffff0000 /* Match */
+
+/*
+ * Bit definitions for Debug stop register
+ *
+ */
+#define SPR_DSR_RSTE 0x00000001 /* Reset exception */
+#define SPR_DSR_BUSEE 0x00000002 /* Bus error exception */
+#define SPR_DSR_DPFE 0x00000004 /* Data Page Fault exception */
+#define SPR_DSR_IPFE 0x00000008 /* Insn Page Fault exception */
+#define SPR_DSR_TTE 0x00000010 /* iTick Timer exception */
+#define SPR_DSR_AE 0x00000020 /* Alignment exception */
+#define SPR_DSR_IIE 0x00000040 /* Illegal Instruction exception */
+#define SPR_DSR_IE 0x00000080 /* Interrupt exception */
+#define SPR_DSR_DME 0x00000100 /* DTLB miss exception */
+#define SPR_DSR_IME 0x00000200 /* ITLB miss exception */
+#define SPR_DSR_RE 0x00000400 /* Range exception */
+#define SPR_DSR_SCE 0x00000800 /* System call exception */
+#define SPR_DSR_SSE 0x00001000 /* Single Step Exception */
+#define SPR_DSR_TE 0x00002000 /* Trap exception */
+
+/*
+ * Bit definitions for Debug reason register
+ *
+ */
+#define SPR_DRR_RSTE 0x00000001 /* Reset exception */
+#define SPR_DRR_BUSEE 0x00000002 /* Bus error exception */
+#define SPR_DRR_DPFE 0x00000004 /* Data Page Fault exception */
+#define SPR_DRR_IPFE 0x00000008 /* Insn Page Fault exception */
+#define SPR_DRR_TTE 0x00000010 /* Tick Timer exception */
+#define SPR_DRR_AE 0x00000020 /* Alignment exception */
+#define SPR_DRR_IIE 0x00000040 /* Illegal Instruction exception */
+#define SPR_DRR_IE 0x00000080 /* Interrupt exception */
+#define SPR_DRR_DME 0x00000100 /* DTLB miss exception */
+#define SPR_DRR_IME 0x00000200 /* ITLB miss exception */
+#define SPR_DRR_RE 0x00000400 /* Range exception */
+#define SPR_DRR_SCE 0x00000800 /* System call exception */
+#define SPR_DRR_TE 0x00001000 /* Trap exception */
+
+/*
+ * Bit definitions for Performance counters mode registers
+ *
+ */
+#define SPR_PCMR_CP 0x00000001 /* Counter present */
+#define SPR_PCMR_UMRA 0x00000002 /* User mode read access */
+#define SPR_PCMR_CISM 0x00000004 /* Count in supervisor mode */
+#define SPR_PCMR_CIUM 0x00000008 /* Count in user mode */
+#define SPR_PCMR_LA 0x00000010 /* Load access event */
+#define SPR_PCMR_SA 0x00000020 /* Store access event */
+#define SPR_PCMR_IF 0x00000040 /* Instruction fetch event*/
+#define SPR_PCMR_DCM 0x00000080 /* Data cache miss event */
+#define SPR_PCMR_ICM 0x00000100 /* Insn cache miss event */
+#define SPR_PCMR_IFS 0x00000200 /* Insn fetch stall event */
+#define SPR_PCMR_LSUS 0x00000400 /* LSU stall event */
+#define SPR_PCMR_BS 0x00000800 /* Branch stall event */
+#define SPR_PCMR_DTLBM 0x00001000 /* DTLB miss event */
+#define SPR_PCMR_ITLBM 0x00002000 /* ITLB miss event */
+#define SPR_PCMR_DDS 0x00004000 /* Data dependency stall event */
+#define SPR_PCMR_WPE 0x03ff8000 /* Watchpoint events */
+
+/*
+ * Bit definitions for the Power management register
+ *
+ */
+#define SPR_PMR_SDF 0x0000000f /* Slow down factor */
+#define SPR_PMR_DME 0x00000010 /* Doze mode enable */
+#define SPR_PMR_SME 0x00000020 /* Sleep mode enable */
+#define SPR_PMR_DCGE 0x00000040 /* Dynamic clock gating enable */
+#define SPR_PMR_SUME 0x00000080 /* Suspend mode enable */
+
+/*
+ * Bit definitions for PICMR
+ *
+ */
+#define SPR_PICMR_IUM 0xfffffffc /* Interrupt unmask */
+
+/*
+ * Bit definitions for PICPR
+ *
+ */
+#define SPR_PICPR_IPRIO 0xfffffffc /* Interrupt priority */
+
+/*
+ * Bit definitions for PICSR
+ *
+ */
+#define SPR_PICSR_IS 0xffffffff /* Interrupt status */
+
+/*
+ * Bit definitions for Tick Timer Control Register
+ *
+ */
+#define SPR_TTCR_PERIOD 0x0fffffff /* Time Period */
+#define SPR_TTMR_PERIOD SPR_TTCR_PERIOD
+#define SPR_TTMR_IP 0x10000000 /* Interrupt Pending */
+#define SPR_TTMR_IE 0x20000000 /* Interrupt Enable */
+#define SPR_TTMR_RT 0x40000000 /* Restart tick */
+#define SPR_TTMR_SR 0x80000000 /* Single run */
+#define SPR_TTMR_CR 0xc0000000 /* Continuous run */
+#define SPR_TTMR_M 0xc0000000 /* Tick mode */
+
+/*
+ * l.nop constants
+ *
+ */
+#define NOP_NOP 0x0000 /* Normal nop instruction */
+#define NOP_EXIT 0x0001 /* End of simulation */
+#define NOP_REPORT 0x0002 /* Simple report */
+#define NOP_printf 0x0003 /* Simprintf instruction */
+#define NOP_REPORT_FIRST 0x0400 /* Report with number */
+#define NOP_REPORT_LAST 0x03ff /* Report with number */
uos/spr_defs.h
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: uos/except_or32.S
===================================================================
--- uos/except_or32.S (nonexistent)
+++ uos/except_or32.S (revision 1765)
@@ -0,0 +1,351 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2000 Damjan Lampret, lampret@opencores.org */
+
+#include "spr_defs.h"
+#include "../board.h"
+
+#define MC_CSR (0x00)
+#define MC_POC (0x04)
+#define MC_BA_MASK (0x08)
+#define MC_CSC(i) (0x10 + (i) * 8)
+#define MC_TMS(i) (0x14 + (i) * 8)
+
+
+/*
+ * Context is saved to area pointed by pointer in R3. Original
+ * R3 is at memory location 0 and task's PC is at memory location 4.
+ */
+#define SAVEREGS \
+ l.lwz r3,0(r3); \
+ l.sw 4(r3),r1; \
+ l.sw 8(r3),r2; \
+ l.lwz r2,0(r0); /* saving original r3*/ \
+ l.sw 12(r3),r2; \
+ l.sw 16(r3),r4; \
+ l.sw 20(r3),r5; \
+ l.sw 24(r3),r6; \
+ l.sw 28(r3),r7; \
+ l.sw 32(r3),r8; \
+ l.sw 36(r3),r9; \
+ l.sw 40(r3),r10; \
+ l.sw 44(r3),r11; \
+ l.sw 48(r3),r12; \
+ l.sw 52(r3),r13; \
+ l.sw 56(r3),r14; \
+ l.sw 60(r3),r15; \
+ l.sw 64(r3),r16; \
+ l.sw 68(r3),r17; \
+ l.sw 72(r3),r18; \
+ l.sw 76(r3),r19; \
+ l.sw 80(r3),r20; \
+ l.sw 84(r3),r21; \
+ l.sw 88(r3),r22; \
+ l.sw 92(r3),r23; \
+ l.sw 96(r3),r24; \
+ l.sw 100(r3),r25; \
+ l.sw 104(r3),r26; \
+ l.sw 108(r3),r27; \
+ l.sw 112(r3),r28; \
+ l.sw 116(r3),r29; \
+ l.sw 120(r3),r30; \
+ l.sw 124(r3),r31; \
+ l.lwz r2,4(r0); /* saving original PC*/ \
+ l.sw 0(r3),r2; \
+ \
+ l.mfspr r2,r0,SPR_ESR_BASE; \
+ l.sw 128(r3),r2 /* saving SR */
+
+/*
+ * Pointer to context is in R3. All registers are loaded and execution is
+ * transfered to the loaded context's task
+ */
+#define LOADREGS_N_GO \
+ l.lwz r3,0(r3); \
+ l.lwz r2,0(r3); /* prepare PC*/ \
+ l.mtspr r0,r2,SPR_EPCR_BASE; \
+ \
+ l.lwz r2,128(r3); /* prepare SR*/ \
+ l.mtspr r0,r2,SPR_ESR_BASE; \
+ \
+ l.lwz r1,4(r3); \
+ l.lwz r2,8(r3); \
+ l.lwz r4,16(r3); \
+ l.lwz r5,20(r3); \
+ l.lwz r6,24(r3); \
+ l.lwz r7,28(r3); \
+ l.lwz r8,32(r3); \
+ l.lwz r9,36(r3); \
+ l.lwz r10,40(r3); \
+ l.lwz r11,44(r3); \
+ l.lwz r12,48(r3); \
+ l.lwz r13,52(r3); \
+ l.lwz r14,56(r3); \
+ l.lwz r15,60(r3); \
+ l.lwz r16,64(r3); \
+ l.lwz r17,68(r3); \
+ l.lwz r18,72(r3); \
+ l.lwz r19,76(r3); \
+ l.lwz r20,80(r3); \
+ l.lwz r21,84(r3); \
+ l.lwz r22,88(r3); \
+ l.lwz r23,92(r3); \
+ l.lwz r24,96(r3); \
+ l.lwz r25,100(r3); \
+ l.lwz r26,104(r3); \
+ l.lwz r27,108(r3); \
+ l.lwz r28,112(r3); \
+ l.lwz r29,116(r3); \
+ l.lwz r30,120(r3); \
+ l.lwz r31,124(r3); \
+ \
+ l.lwz r3,12(r3); /* prepare r3*/ \
+ \
+ l.rfe; /* Call task */ \
+ l.nop
+
+/*
+ * All registers are loaded from save area.
+ */
+#define LOADREGS \
+ l.lwz r3,0(r3); \
+ l.lwz r2,0(r3); /* prepare PC*/ \
+ l.mtspr r0,r2,SPR_EPCR_BASE; \
+ \
+ l.lwz r2,128(r3); /* prepare SR*/ \
+ l.mtspr r0,r2,SPR_ESR_BASE; \
+ \
+ l.lwz r1,4(r3); \
+ l.lwz r2,8(r3); \
+ l.lwz r4,16(r3); \
+ l.lwz r5,20(r3); \
+ l.lwz r6,24(r3); \
+ l.lwz r7,28(r3); \
+ l.lwz r8,32(r3); \
+ l.lwz r9,36(r3); \
+ l.lwz r10,40(r3); \
+ l.lwz r11,44(r3); \
+ l.lwz r12,48(r3); \
+ l.lwz r13,52(r3); \
+ l.lwz r14,56(r3); \
+ l.lwz r15,60(r3); \
+ l.lwz r16,64(r3); \
+ l.lwz r17,68(r3); \
+ l.lwz r18,72(r3); \
+ l.lwz r19,76(r3); \
+ l.lwz r20,80(r3); \
+ l.lwz r21,84(r3); \
+ l.lwz r22,88(r3); \
+ l.lwz r23,92(r3); \
+ l.lwz r24,96(r3); \
+ l.lwz r25,100(r3); \
+ l.lwz r26,104(r3); \
+ l.lwz r27,108(r3); \
+ l.lwz r28,112(r3); \
+ l.lwz r29,116(r3); \
+ l.lwz r30,120(r3); \
+ l.lwz r31,124(r3); \
+ \
+ l.lwz r3,12(r3); /* prepare r3*/
+
+/*
+ * Set new PC in saved context
+ */
+#define SET_CONTEXTPC(AREA,SUBROUTINE,TMPREG) \
+ l.lwz AREA,0(AREA); \
+ l.movhi TMPREG,hi(SUBROUTINE); \
+ l.addi TMPREG,r0,lo(SUBROUTINE); \
+ l.sw 0(AREA),TMPREG;
+
+/*
+ * Printf via or1ksim hook
+ */
+#if KERNEL_OUTPUT
+#define PRINTF(REG,STR) \
+ l.movhi REG,hi(STR); \
+ l.addi REG,r0,lo(STR); \
+ l.nop NOP_PRINTF
+#else
+#define PRINTF(REG,STR)
+#endif
+
+/*
+ * Reset Exception handler
+ */
+.org 0x100
+_reset_vector:
+
+ l.movhi r3,hi(MC_BASE_ADDR)
+ l.ori r3,r3,lo(MC_BASE_ADDR)
+
+ l.addi r4,r3,MC_CSC(0)
+ l.movhi r5,hi(FLASH_BASE_ADDR)
+ l.srai r5,r5,6
+ l.ori r5,r5,0x0025
+ l.sw 0(r4),r5
+
+ l.addi r4,r3,MC_TMS(0)
+ l.movhi r5,hi(FLASH_TMS_VAL)
+ l.ori r5,r5,lo(FLASH_TMS_VAL)
+ l.sw 0(r4),r5
+
+ l.addi r4,r3,MC_BA_MASK
+ l.addi r5,r0,MC_MASK_VAL
+ l.sw 0(r4),r5
+
+ l.addi r4,r3,MC_CSR
+ l.movhi r5,hi(MC_CSR_VAL)
+ l.ori r5,r5,lo(MC_CSR_VAL)
+ l.sw 0(r4),r5
+
+ l.addi r4,r3,MC_TMS(1)
+ l.movhi r5,hi(SDRAM_TMS_VAL)
+ l.ori r5,r5,lo(SDRAM_TMS_VAL)
+ l.sw 0(r4),r5
+
+ l.addi r4,r3,MC_CSC(1)
+ l.movhi r5,hi(SDRAM_BASE_ADDR)
+ l.srai r5,r5,6
+ l.ori r5,r5,0x0411
+ l.sw 0(r4),r5
+
+ l.jr r9
+ l.nop
+
+ /* Copy data section */
+ l.movhi r3,hi(_src_beg)
+ l.ori r3,r3,lo(_src_beg)
+ l.addi r4,r0,0x200
+ l.movhi r5,hi(_except_end)
+ l.ori r5,r5,lo(_except_end)
+ l.movhi r6,hi(_except_beg)
+ l.ori r6,r6,lo(_except_beg)
+ l.sub r5,r6,r5
+1:
+ l.lwz r6,0(r3)
+ l.sw 0(r4),r6
+ l.addi r3,r3,4
+ l.addi r4,r4,4
+ l.addi r5,r5,-4
+ l.sfgtsi r5,0
+ l.bf 1b
+ l.nop
+
+ l.movhi r4,hi(_dst_beg)
+ l.ori r4,r4,lo(_dst_beg)
+ l.movhi r5,hi(_dst_end)
+ l.ori r5,r5,lo(_dst_end)
+ l.sub r5,r5,r4
+ l.sfeqi r5,0
+ l.bf 2f
+ l.nop
+1:
+ l.lwz r6,0(r3)
+ l.sw 0(r4),r6
+ l.addi r3,r3,4
+ l.addi r4,r4,4
+ l.addi r5,r5,-4
+ l.sfgtsi r5,0
+ l.bf 1b
+ l.nop
+
+2:
+
+
+ l.movhi r2,hi(_reset)
+ l.ori r2,r2,lo(_reset)
+ l.jr r2
+ l.nop
+
+/*
+ * Switch to a new context pointed by _task_context
+ */
+.global _dispatch
+.align 4
+_dispatch:
+ /* load user task GPRs and PC */
+ l.movhi r3,hi(_task_context)
+ l.addi r3,r0,lo(_task_context)
+ LOADREGS_N_GO
+
+.section .except, "ax"
+
+/*
+ * Bus Error Exception handler
+ */
+.org 0x0200
+_buserr:
+ l.nop
+ l.sw 0(r0),r3 /* Save r3 */
+ PRINTF(r3, _buserr_str)
+_hang:
+ l.j _hang
+ l.nop
+
+_buserr_str:
+ .ascii "Bus error exception.\n\000"
+
+/*
+ * External Interrupt Exception handler
+ */
+.org 0x800
+_extint:
+ l.nop
+ l.sw 0(r0),r3 /* Save r3 */
+ PRINTF(r3,_extint_str)
+ l.mfspr r3,r0,SPR_EPCR_BASE /* Get EPCR */
+ l.sw 4(r0),r3 /* and save it */
+
+ /* now save user task context */
+ l.movhi r3,hi(_task_context)
+ l.addi r3,r0,lo(_task_context)
+ SAVEREGS
+
+ /* set kernel context's PC to kernel's scheduler */
+ l.movhi r3,hi(_kernel_context)
+ l.addi r3,r0,lo(_kernel_context)
+ SET_CONTEXTPC(r3,_int_main,r4)
+
+ /* load kernel context */
+ l.movhi r3,hi(_kernel_context)
+ l.addi r3,r0,lo(_kernel_context)
+ LOADREGS
+
+ l.movhi r3,hi(_int_main)
+ l.addi r3,r0,lo(_int_main)
+ l.jr r3
+ l.nop
+
+_extint_str:
+ .ascii "External interrupt exception.\n\000"
+
+/*
+ * System Call Exception handler
+ */
+.org 0x0c00
+_syscall:
+ l.nop
+ l.sw 0(r0),r3 /* Save r3 */
+ PRINTF(r3,_syscall_str)
+ l.mfspr r3,r0,SPR_EPCR_BASE /* Get EPCR */
+ l.addi r3,r3,4 /* increment because EPCR instruction was already executed */
+ l.sw 4(r0),r3 /* and save it */
+
+ /* now save user task context */
+ l.movhi r3,hi(_task_context)
+ l.addi r3,r0,lo(_task_context)
+ SAVEREGS
+
+ /* set kernel context's PC to kernel's syscall entry */
+ l.movhi r3,hi(_kernel_context)
+ l.addi r3,r0,lo(_kernel_context)
+ SET_CONTEXTPC(r3,_kernel_syscall,r4)
+
+ /* load kernel context */
+ l.movhi r3,hi(_kernel_context)
+ l.addi r3,r0,lo(_kernel_context)
+ LOADREGS_N_GO
+
+_syscall_str:
+ .ascii "System call exception.\n\000"
+
+
Index: uos/tick.c
===================================================================
--- uos/tick.c (nonexistent)
+++ uos/tick.c (revision 1765)
@@ -0,0 +1,34 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2001 Simon Srot, srot@opencores.org */
+
+#include "spr_defs.h"
+#include "support.h"
+
+/* Tick timer period */
+unsigned long tick_period;
+
+/* Inform of tick interrupt */
+void (*tick_inf)();
+
+/* Tick interrupt routine */
+void tick_int()
+{
+ /* Call inf routine */
+ (*tick_inf)();
+
+ /* Set new counter period iand clear inet pending bit */
+ mtspr(SPR_TTMR, SPR_TTMR_IE | SPR_TTMR_RT | (tick_period & SPR_TTMR_PERIOD));
+}
+
+/* Initialize routine */
+int tick_init(unsigned long period, void (* inf)())
+{
+ /* Save tick timer period and inform routine */
+ tick_period = period;
+ tick_inf = inf;
+
+ /* Set counter period, enable timer and interrupt */
+ mtspr(SPR_TTMR, SPR_TTMR_IE | SPR_TTMR_RT | (period & SPR_TTMR_PERIOD));
+
+ return 0;
+}
Index: uos/Makefile.am
===================================================================
--- uos/Makefile.am (nonexistent)
+++ uos/Makefile.am (revision 1765)
@@ -0,0 +1,28 @@
+## Makefile for or1ksim subdirectory test
+## (c) Marko Mlinar, 2001
+## To add new test, edit between marked areas only
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+LDADD = ../support/libsupport.a
+LDFLAGS = -T${top_srcdir}/default.ld
+
+bin_PROGRAMS = uos
+uos_SOURCES = except_or32.S support.h spr_defs.h task.c int.h ipc.h tick.c uos.h uos.c
+
+again: clean all
uos/Makefile.am
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: uos/ipc.h
===================================================================
--- uos/ipc.h (nonexistent)
+++ uos/ipc.h (revision 1765)
@@ -0,0 +1,27 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2000 Damjan Lampret, lampret@opencores.org */
+
+/* Operation completed sucessfully. */
+#define IPC_NOERR 0
+
+/* Can't send any messages due to lack of free MCBs. */
+#define IPC_EOUTOFMCBS 1
+
+/* Sending message: No such destination task.
+ Receiving message: No such origin task. */
+#define IPC_ENOTASK 2
+
+/* Message to big to be sent or receive buffer is to small for
+ receiving message. If receiving then try again with bigger buffer. */
+#define IPC_ETOOBIG 3
+
+/* No messages waiting to be received. */
+#define IPC_ENOMSGS 4
+
+/* Send message in buffer buf of size len to task desttask. */
+int uos_msgsnd(tid_t desttask, char *buf, int len);
+
+/* Receive message of max size len from task origintask and put it
+ into buffer buf. If origintask is zero then get the first message
+ from the message queue. */
+int uos_msgrcv(tid_t origintask, char *buf, int len);
Index: uos/uos.h
===================================================================
--- uos/uos.h (nonexistent)
+++ uos/uos.h (revision 1765)
@@ -0,0 +1,58 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2000 Damjan Lampret, lampret@opencores.org */
+
+/* Length of the IPC message's useful data. */
+#define MAX_MSGLEN 100
+
+/* Number of user tasks in the system. */
+#define MAX_TASKS 8
+
+/* Number of IPC messages in the system. */
+#define MAX_MSGS 16
+
+/* Number of general purpose registers (not counting r0 and r1). */
+#define GPRS 30
+
+/* Size of kernel and user task stacks. Size for individual task. */
+#define STACK_SIZE 2048
+
+/* Define this if you want kernel debug output. Note that you must
+ assemble except_or32.S with KERNEL_OUTPUT defined in Makefile. This
+ definition is only for main uos.c. */
+#define KERNEL_OUTPUT 0
+
+/* Define this if you want task switch at every system call. */
+#define KERNEL_SYSCALL_SCHED 0
+
+/* System tick timer period */
+#define TICK_PERIOD 0x500
+
+/* Task ID type (if we would have processes then we would call it PID) */
+typedef int tid_t;
+
+/* System call numbers */
+#define IPC_MSGSND 1
+#define IPC_MSGRCV 2
+
+/* Message Control Block structure */
+struct mcb {
+ char msg[MAX_MSGLEN]; /* Message's data */
+ int length; /* Message's length */
+ tid_t origin; /* TID of message's origin task */
+ struct mcb *next; /* Next message in linked list */
+};
+
+/* Task Control Block structure */
+struct tcb {
+ struct regs {
+ unsigned long pc; /* Task's PC */
+ unsigned long sp; /* Task's stack (r1)*/
+ unsigned long gprs[GPRS]; /* Task's GPRs r2-r15 */
+ unsigned long sr; /* Task's supervision register */
+ } regs;
+ struct mcb *waiting_msgs; /* Waiting messages */
+};
+
+extern void dispatch();
+/* Called by kernel_init to collect all tasks entries. */
+extern void tasks_entries();
Index: uos/README
===================================================================
--- uos/README (nonexistent)
+++ uos/README (revision 1765)
@@ -0,0 +1,18 @@
+
+This is the Micro OS (uOS) for testing operating system features of
+OpenRISC 1000 architecture. Specifically non reentrant, preemptive
+multitasking microkernel. Purpose of this code is not to be a true
+operating system but merely a testbench for testing the architecture,
+or1ksim and software development tools (GCC, Binutils, ...).
+
+This test OS has all necessary exception handlers to handle exceptions. There
+are two tasks: one task generates data and passes that data via IPC to the
+second task. Second task outputs the data via or1ksim syscall to the simulator.
+
+Currently only OR32 is supported (exception handlers are written in
+assembly). Tools required to compile sources are the latest
+or32-coff-gcc, or32-coff-as and or32-coff-ld. Also make sure you undefine
+VIRTUAL_MACHINE_ONLY when compiling or1ksim.
+
+--
+10/Jun/2000, Damjan Lampret, lampret@opencores.org
Index: uos
===================================================================
--- uos (nonexistent)
+++ uos (revision 1765)
uos
Property changes :
Added: svn:ignore
## -0,0 +1,3 ##
+Makefile
+uos
+.deps
Index: support/Makefile.in
===================================================================
--- support/Makefile.in (nonexistent)
+++ support/Makefile.in (revision 1765)
@@ -0,0 +1,324 @@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile -- Makefile for cpu architecture independent simulation
+# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASFLAGS = @CCASFLAGS@
+DEPDIR = @DEPDIR@
+INCLUDES = @INCLUDES@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+MAKE_SHELL = @MAKE_SHELL@
+OR1K_SRCDIR = @OR1K_SRCDIR@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+SIM = @SIM@
+STRIP = @STRIP@
+TESTS_ENV = @TESTS_ENV@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+install_sh = @install_sh@
+
+noinst_LIBRARIES = libsupport.a
+libsupport_a_SOURCES = support.c support.h int.c int.h
+subdir = support
+mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libsupport_a_AR = $(AR) cru
+libsupport_a_LIBADD =
+am_libsupport_a_OBJECTS = support.$(OBJEXT) int.$(OBJEXT)
+libsupport_a_OBJECTS = $(am_libsupport_a_OBJECTS)
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES = -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/../depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/int.Po ./$(DEPDIR)/support.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+CFLAGS = @CFLAGS@
+DIST_SOURCES = $(libsupport_a_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(libsupport_a_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu support/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+AR = ar
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libsupport.a: $(libsupport_a_OBJECTS) $(libsupport_a_DEPENDENCIES)
+ -rm -f libsupport.a
+ $(libsupport_a_AR) libsupport.a $(libsupport_a_OBJECTS) $(libsupport_a_LIBADD)
+ $(RANLIB) libsupport.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/int.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/support.Po@am__quote@
+
+distclean-depend:
+ -rm -rf ./$(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @list='$(DISTFILES)'; for file in $$list; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+ distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES distclean distclean-compile \
+ distclean-depend distclean-generic distclean-tags distdir dvi \
+ dvi-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic tags uninstall uninstall-am \
+ uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: support/support.c
===================================================================
--- support/support.c (nonexistent)
+++ support/support.c (revision 1765)
@@ -0,0 +1,131 @@
+/* Support */
+
+#include
+#include "spr_defs.h"
+#include "support.h"
+#include "int.h"
+
+#if OR1K
+void excpt_dummy();
+void int_main();
+
+unsigned long excpt_buserr = (unsigned long) excpt_dummy;
+unsigned long excpt_dpfault = (unsigned long) excpt_dummy;
+unsigned long excpt_ipfault = (unsigned long) excpt_dummy;
+unsigned long excpt_tick = (unsigned long) excpt_dummy;
+unsigned long excpt_align = (unsigned long) excpt_dummy;
+unsigned long excpt_illinsn = (unsigned long) excpt_dummy;
+unsigned long excpt_int = (unsigned long) int_main;
+unsigned long excpt_dtlbmiss = (unsigned long) excpt_dummy;
+unsigned long excpt_itlbmiss = (unsigned long) excpt_dummy;
+unsigned long excpt_range = (unsigned long) excpt_dummy;
+unsigned long excpt_syscall = (unsigned long) excpt_dummy;
+unsigned long excpt_break = (unsigned long) excpt_dummy;
+unsigned long excpt_trap = (unsigned long) excpt_dummy;
+
+
+/* Start function, called by reset exception handler. */
+void reset ()
+{
+ int i = main();
+ exit (i);
+}
+
+/* return value by making a syscall */
+void exit (int i)
+{
+ asm("l.add r3,r0,%0": : "r" (i));
+ asm("l.nop %0": :"K" (NOP_EXIT));
+ while (1);
+}
+
+/* activate printf support in simulator */
+void printf(const char *fmt, ...)
+{
+ va_list args;
+ va_start(args, fmt);
+ __asm__ __volatile__ (" l.addi\tr3,%0,0\n": : "r" (fmt) : "r3", "r4");
+ __asm__ __volatile__ (" l.addi\tr4,%0,0\n": : "r" (args): "r3", "r4");
+ __asm__ __volatile__ (" l.nop %0": : "K" (NOP_PRINTF));
+}
+
+/* print long */
+void report(unsigned long value)
+{
+ asm("l.addi\tr3,%0,0": :"r" (value));
+ asm("l.nop %0": :"K" (NOP_REPORT));
+}
+
+/* just to satisfy linker */
+void __main()
+{
+}
+
+/* start_TIMER */
+void start_timer(int x)
+{
+}
+
+/* read_TIMER */
+/* Returns a value since started in uS */
+unsigned int read_timer(int x)
+{
+ unsigned long count = 0;
+
+ /* Read the Time Stamp Counter */
+/* asm("simrdtsc %0" :"=r" (count)); */
+ /*asm("l.sys 201"); */
+ return count;
+}
+
+/* For writing into SPR. */
+void mtspr(unsigned long spr, unsigned long value)
+{
+ asm("l.mtspr\t\t%0,%1,0": : "r" (spr), "r" (value));
+}
+
+/* For reading SPR. */
+unsigned long mfspr(unsigned long spr)
+{
+ unsigned long value;
+ asm("l.mfspr\t\t%0,%1,0" : "=r" (value) : "r" (spr));
+ return value;
+}
+
+#else
+void report(unsigned long value)
+{
+ printf("report(0x%x);\n", (unsigned) value);
+}
+
+/* start_TIMER */
+void start_timer(int tmrnum)
+{
+}
+
+/* read_TIMER */
+/* Returns a value since started in uS */
+unsigned int read_timer(int tmrnum)
+{
+ struct timeval tv;
+ struct timezone tz;
+
+ gettimeofday(&tv, &tz);
+
+ return(tv.tv_sec*1000000+tv.tv_usec);
+}
+
+#endif
+
+void *memcpy (void *__restrict dstvoid,
+ __const void *__restrict srcvoid, size_t length)
+{
+ char *dst = dstvoid;
+ const char *src = (const char *) srcvoid;
+
+ while (length--)
+ *dst++ = *src++;
+ return dst;
+}
+
+void excpt_dummy() {}
support/support.c
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: support/support.h
===================================================================
--- support/support.h (nonexistent)
+++ support/support.h (revision 1765)
@@ -0,0 +1,65 @@
+/* Support file for or32 tests. This file should is included
+ in each test. It calls main() function and add support for
+ basic functions */
+
+#ifndef SUPPORT_H
+#define SUPPORT_H
+
+#include
+#include
+#include
+
+#if OR1K
+//#include <_ansi.h>
+
+/* Register access macros */
+#define REG8(add) *((volatile unsigned char *)(add))
+#define REG16(add) *((volatile unsigned short *)(add))
+#define REG32(add) *((volatile unsigned long *)(add))
+
+void printf(const char *fmt, ...);
+
+/* For writing into SPR. */
+void mtspr(unsigned long spr, unsigned long value);
+
+/* For reading SPR. */
+unsigned long mfspr(unsigned long spr);
+
+#else /* OR1K */
+
+#include
+
+#endif /* OR1K */
+
+/* Function to be called at entry point - not defined here. */
+int main ();
+
+/* Prints out a value */
+void report(unsigned long value);
+
+/* return value by making a syscall */
+extern void exit (int i) __attribute__ ((__noreturn__));
+
+/* memcpy clone */
+extern void *memcpy (void *__restrict __dest,
+ __const void *__restrict __src, size_t __n);
+
+/* Timer functions */
+extern void start_timer(int);
+extern unsigned int read_timer(int);
+
+extern unsigned long excpt_buserr;
+extern unsigned long excpt_dpfault;
+extern unsigned long excpt_ipfault;
+extern unsigned long excpt_tick;
+extern unsigned long excpt_align;
+extern unsigned long excpt_illinsn;
+extern unsigned long excpt_int;
+extern unsigned long excpt_dtlbmiss;
+extern unsigned long excpt_itlbmiss;
+extern unsigned long excpt_range;
+extern unsigned long excpt_syscall;
+extern unsigned long excpt_break;
+extern unsigned long excpt_trap;
+
+#endif
support/support.h
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: support/int.h
===================================================================
--- support/int.h (nonexistent)
+++ support/int.h (revision 1765)
@@ -0,0 +1,15 @@
+
+/* Number of interrupt handlers */
+#define MAX_INT_HANDLERS 32
+
+/* Handler entry */
+struct ihnd {
+ void (*handler)(void *);
+ void *arg;
+};
+
+/* Add interrupt handler */
+int int_add(unsigned long vect, void (* handler)(void *), void *arg);
+
+/* Initialize routine */
+int int_init();
Index: support/int.c
===================================================================
--- support/int.c (nonexistent)
+++ support/int.c (revision 1765)
@@ -0,0 +1,79 @@
+/* This file is part of test microkernel for OpenRISC 1000. */
+/* (C) 2001 Simon Srot, srot@opencores.org */
+
+#include "support.h"
+#include "spr_defs.h"
+#include "int.h"
+
+#ifdef OR1K
+
+/* Interrupt handlers table */
+struct ihnd int_handlers[MAX_INT_HANDLERS];
+
+/* Initialize routine */
+int int_init()
+{
+ int i;
+
+ for(i = 0; i < MAX_INT_HANDLERS; i++) {
+ int_handlers[i].handler = 0;
+ int_handlers[i].arg = 0;
+ }
+
+ return 0;
+}
+
+/* Add interrupt handler */
+int int_add(unsigned long vect, void (* handler)(void *), void *arg)
+{
+ if(vect >= MAX_INT_HANDLERS)
+ return -1;
+
+ int_handlers[vect].handler = handler;
+ int_handlers[vect].arg = arg;
+
+ mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (0x00000001L << vect));
+
+ return 0;
+}
+
+/* Disable interrupt */
+int int_disable(unsigned long vect)
+{
+ if(vect >= MAX_INT_HANDLERS)
+ return -1;
+
+ mtspr(SPR_PICMR, mfspr(SPR_PICMR) & ~(0x00000001L << vect));
+
+ return 0;
+}
+
+/* Enable interrupt */
+int int_enable(unsigned long vect)
+{
+ if(vect >= MAX_INT_HANDLERS)
+ return -1;
+
+ mtspr(SPR_PICMR, mfspr(SPR_PICMR) | (0x00000001L << vect));
+
+ return 0;
+}
+
+/* Main interrupt handler */
+void int_main()
+{
+ unsigned long picsr = mfspr(SPR_PICSR);
+ unsigned long i = 0;
+
+ mtspr(SPR_PICSR, 0);
+
+ while(i < 32) {
+ if((picsr & (0x01L << i)) && (int_handlers[i].handler != 0)) {
+ (*int_handlers[i].handler)(int_handlers[i].arg);
+ mtspr(SPR_PICSR, mfspr(SPR_PICSR) & ~(0x00000001L << i));
+ }
+ i++;
+ }
+}
+
+#endif
Index: support/Makefile.am
===================================================================
--- support/Makefile.am (nonexistent)
+++ support/Makefile.am (revision 1765)
@@ -0,0 +1,29 @@
+# Makefile -- Makefile for cpu architecture independent simulation
+# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+##if OR1K_EXCEPT
+##OR1K_SUPPORT_S = except.S
+##else
+##OR1K_SUPPORT_S =
+##endif
+
+noinst_LIBRARIES = libsupport.a
+libsupport_a_SOURCES = support.c support.h int.c int.h
+## EXTRA_libsupport_a_SOURCES = except.S
support/Makefile.am
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: support
===================================================================
--- support (nonexistent)
+++ support (revision 1765)
support
Property changes :
Added: svn:ignore
## -0,0 +1,2 ##
+Makefile
+.deps
Index: aclocal.m4
===================================================================
--- aclocal.m4 (nonexistent)
+++ aclocal.m4 (revision 1765)
@@ -0,0 +1,817 @@
+# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*-
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# This macro actually does too much some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+AC_PREREQ([2.52])
+
+# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
+# the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl
+ AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_MISSING_PROG(AMTAR, tar)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_][CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_][CC],
+ defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_][CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_][CXX],
+ defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+# Copyright 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.6.3])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+# Copyright 1996, 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# -*- Autoconf -*-
+
+
+# Copyright 1997, 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 3
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# AM_AUX_DIR_EXPAND
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+# Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])
+
+AC_DEFUN([AM_AUX_DIR_EXPAND], [
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# AM_PROG_INSTALL_STRIP
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# serial 4 -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ echo '#include "conftest.h"' > conftest.c
+ echo 'int i;' > conftest.h
+ echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=conftest.c object=conftest.o \
+ depfile=conftest.Po tmpdepfile=conftest.TPo \
+ $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
+ grep conftest.h conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[rm -f .deps 2>/dev/null
+mkdir .deps 2>/dev/null
+if test -d .deps; then
+ DEPDIR=.deps
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ DEPDIR=_deps
+fi
+rmdir .deps 2>/dev/null
+AC_SUBST([DEPDIR])
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking Speeds up one-time builds
+ --enable-dependency-tracking Do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright 1999, 2000, 2001, 2002 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+#serial 2
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ grep '^DEP_FILES *= *[[^ @%:@]]' < "$mf" > /dev/null || continue
+ # Extract the definition of DEP_FILES from the Makefile without
+ # running `make'.
+ DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n -e '/^U = / s///p' < "$mf"`
+ test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
+ # We invoke sed twice because it is the simplest approach to
+ # changing $(DEPDIR) to its actual value in the expansion.
+ for file in `sed -n -e '
+ /^DEP_FILES = .*\\\\$/ {
+ s/^DEP_FILES = //
+ :loop
+ s/\\\\$//
+ p
+ n
+ /\\\\$/ b loop
+ p
+ }
+ /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*-
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 2
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+doit:
+ @echo done
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST(am__include)
+AC_SUBST(am__quote)
+AC_MSG_RESULT($_am_result)
+rm -f confinc confmf
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright 1997, 2000, 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# serial 5
+
+AC_PREREQ(2.52)
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([conditional \"$1\" was never defined.
+Usually this means the macro was only invoked conditionally.])
+fi])])
+
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software, distributed under the terms of the GNU
+dnl General Public License. As a special exception to the GNU General
+dnl Public License, this file may be distributed as part of a program
+dnl that contains a configuration script generated by Autoconf, under
+dnl the same distribution terms as the rest of that program.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# serial 2
+
+# Copyright 2001 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+: ${CCAS='$(CC)'}
+# Set ASFLAGS if not already set.
+: ${CCASFLAGS='$(CFLAGS)'}
+AC_SUBST(CCAS)
+AC_SUBST(CCASFLAGS)])
+
aclocal.m4
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: configure.in
===================================================================
--- configure.in (nonexistent)
+++ configure.in (revision 1765)
@@ -0,0 +1,99 @@
+dnl or32 test suite - top level
+dnl
+dnl Copyright (C) 2001 Marko Mlinar
+dnl
+dnl This file is part of OpenRISC 1000 Architectural Simulator.
+dnl
+dnl This program is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2 of the License, or
+dnl (at your option) any later version.
+dnl
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with this program; if not, write to the Free Software
+dnl Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+dnl
+dnl Process this file with autoconf to produce a configure script.
+
+dnl disable cache, since it causes troubles when changing hosts
+dnl define([AC_CACHE_LOAD], )dnl
+dnl define([AC_CACHE_SAVE], )dnl
+
+AC_REVISION([for or1ksim-1.2, version 2.14, from autoconf version] AC_ACVERSION)
+AC_PREREQ(2.10)
+AC_INIT(support/support.h)
+AC_CANONICAL_HOST
+AM_INIT_AUTOMAKE(or1ksimtest, 1.3)
+
+dnl Checks for programs.
+AC_PROG_MAKE_SET
+AC_PROG_INSTALL
+AC_CHECK_TOOL(CC, $target-gcc, cc)
+AC_CHECK_TOOL(RANLIB, $target-ranlib, ranlib)
+AC_CHECK_TOOL(LD, $target-ld, ld)
+AC_CHECK_TOOL(SIM, $target-sim, sim)
+AC_ISC_POSIX
+AC_HEADER_STDC
+
+AM_PROG_AS
+
+MAKE_SHELL=/bin/sh
+AC_SUBST(MAKE_SHELL)
+
+dnl Compiler options.
+AC_PROG_GCC_TRADITIONAL
+dnl set -- $CFLAGS
+CFLAGS="-Wall -g"
+
+COMPILE_OR1K=unknown
+
+AC_SUBST(TESTS_ENV)
+TESTS_ENV=
+AC_SUBST(OR1K_SRCDIR)
+OR1K_SRCDIR="./${top_srcdir}"
+case $target in
+ or1k*|or32*)
+ CFLAGS="$CFLAGS -nostdlib -mhard-div"
+ COMPILE=or1k
+ TESTS_ENV="$SIM"
+ ;;
+esac
+dnl echo $TESTS_ENV
+AM_CONDITIONAL(OR1K_EXCEPT, test x$COMPILE = xor1k)
+
+
+dnl optimizations level
+AC_MSG_CHECKING(whether to enable optimizations)
+AC_ARG_ENABLE(opt,
+ [ --enable-opt enable optimizations
+ --enable-opt=level same as gcc -O switch ], [
+ case "$enableval" in
+ yes)
+ CFLAGS="$CFLAGS -O"
+ ;;
+ *)
+ CFLAGS="$CFLAGS -O$enableval"
+ ;;
+ esac
+])
+AC_MSG_RESULT(${enable_opt-default})
+
+case "$enable_debugging" in
+ yes) AC_CHECK_LIB(efence, malloc) ;;
+esac
+
+AC_SUBST(INCLUDES)
+INCLUDES="-I\${top_srcdir}/support"
+CCASFLAGS="${CFLAGS} ${INCLUDES}"
+
+dnl Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_INLINE
+
+dnl Create output files.
+AC_OUTPUT([Makefile support/Makefile uos/Makefile])
configure.in
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: README
===================================================================
--- README (nonexistent)
+++ README (revision 1765)
@@ -0,0 +1,28 @@
+This directory includes some test case programs that should be used to verify correct operation
+of the or1ksim, OR32 GCC and OR32 GNU Binutils.
+
+All programs are built and checked by:
+
+./configure --target=or32-uclinux
+make all check
+
+You need to have all GNU OR32 tools installed and in the path.
+
+!!! For all test cases, or1ksim should be built with ONLY_VIRTUAL_MACHINE undefined in
+cpu/or1k/except.h !!!
+
+All tests should exit with:
+MTSPR(0x1234, deaddead);
+syscall exit(0)
+
+If the test fails, it should print as much output as possible about the failure.
+
+dhry: Dhrystone 2.1: a benchmark modified to use simulator's timing facility.
+basic: a test for all instructions and all GPRs.
+test1: a test for "all" instructions and their combinations.
+pic: a test for PIC and TICK timer. All three modes of TICK timer are tested and interrupt is enabled and disabled in PIC.
+excpt: a test of l.sys instruction. Checks all the delay slot issues ind other things.
+cfg: a test of SPRs (SPR_VR, SPR_CPUCFGR, SPR_DMMUCFGR, SPR_IMMUCFGR, SPR_DCCFGR, SPR_ICCFGR, SPR_DCFGR, SPR_PCCFGR).
+dma: a test of DMA in normal (software) mode.
+compress: UNIX compressed modified not to use libc calls.
+mul: Test l.mul, l.mac and l.macrc instructions.
Index: acv_uart.c
===================================================================
--- acv_uart.c (nonexistent)
+++ acv_uart.c (revision 1765)
@@ -0,0 +1,824 @@
+/* UART test using ACV */
+
+#include "spr_defs.h"
+#include "support.h"
+
+/* use this macro to comment out nonworking parts */
+#define COMPLETE 0
+
+/* Whether to do test in more detail */
+#define DETAILED 0
+
+#define UART_ADDR (0x9c000000)
+#define UART_RBR (UART_ADDR + 0)
+#define UART_THR (UART_ADDR + 0)
+#define UART_IER (UART_ADDR + 1)
+#define UART_IIR (UART_ADDR + 2)
+#define UART_FCR (UART_ADDR + 2)
+#define UART_LCR (UART_ADDR + 3)
+#define UART_MCR (UART_ADDR + 4)
+#define UART_LSR (UART_ADDR + 5)
+#define UART_MSR (UART_ADDR + 6)
+#define UART_SCR (UART_ADDR + 7)
+
+#define UART_DLL (UART_ADDR + 0)
+#define UART_DLH (UART_ADDR + 1)
+
+#define LCR_DIVL (0x80)
+#define LCR_BREAK (0x40)
+#define LCR_STICK (0x20)
+#define LCR_EVENP (0x10)
+#define LCR_PAREN (0x08)
+#define LCR_NSTOP (0x04)
+#define LCR_NBITS (0x03)
+
+#define LSR_DR (0x01)
+#define LSR_OE (0x02)
+#define LSR_PE (0x04)
+#define LSR_FE (0x08)
+#define LSR_BREAK (0x10)
+#define LSR_TXFE (0x20)
+#define LSR_TXE (0x40)
+#define LSR_ERR (0x80)
+
+#define UART_INT_LINE 19 /* To which interrupt is uart connected */
+
+/* fails if x is false */
+#define ASSERT(x) ((x)?1: fail (__FUNCTION__, __LINE__))
+/* Waits a few cycles that uart can prepare its data */
+#define WAIT() {asm ("l.nop");asm ("l.nop");asm ("l.nop");asm ("l.nop");}
+/* fails if there is an error */
+#define NO_ERROR() { unsigned x = getreg (UART_LSR); if ((x & (LSR_BREAK|LSR_FE|LSR_PE|LSR_OE)) && !(x & LSR_ERR)) \
+printf ("LSR7 (0x%02x) ERR @ %i\n", x, __LINE__); ASSERT(!(x & LSR_ERR) && ((x & 0x60) != 0x40));}
+#define MARK() printf ("Passed line %i\n", __LINE__)
+
+#ifndef __LINE__
+#define __LINE__ 0
+#endif
+
+void fail (char *func, int line)
+{
+#ifndef __FUNCTION__
+#define __FUNCTION__ "?"
+#endif
+ printf ("Test failed in %s:%i\n", func, line);
+ report(0xeeeeeeee);
+ exit (1);
+}
+
+inline void setreg (unsigned long addr, unsigned char value)
+{
+ *((volatile unsigned char *)addr) = value;
+}
+
+inline unsigned long getreg (unsigned long addr)
+{
+ return *((volatile unsigned char *)addr);
+}
+
+static volatile int int_cnt;
+static volatile unsigned int_iir;
+static volatile unsigned int_lsr;
+static int int_rbr;
+
+void interrupt_handler ()
+{
+ unsigned x;
+ printf ("Int\n");
+ report(0xdeaddead);
+ report(int_iir = getreg (UART_IIR));
+ report(int_lsr = getreg (UART_LSR));
+ int_cnt++;
+ ASSERT (int_iir != 1);
+ switch (int_iir & 0xf) {
+ case 0x6: printf ("Receiver LS int.\n"); break;
+ case 0x4: printf ("Received Data available. Expecting %02x, received %02x\n",
+ int_rbr, x = getreg(UART_RBR));
+ ASSERT (x == int_rbr);
+ report (x);
+ report (int_rbr);
+ break;
+ case 0xc: printf ("Character timeout. Expecting %02x, received %02x\n",
+ int_rbr, x = getreg(UART_RBR));
+ ASSERT (x == int_rbr);
+ report (x);
+ report (int_rbr);
+ break;
+ case 0x2: printf ("THR empty.\n"); break;
+ case 0x0: printf ("Modem Status.\n"); break;
+ default:
+ printf ("Invalid iir @ %i\n", __LINE__);
+ exit (1);
+ }
+ mtspr(SPR_PICSR, 0);
+}
+
+/* Receives a char and checks for errors */
+
+void recv_char (int ch)
+{
+ unsigned x;
+ char r;
+ report (ch);
+ /* Wait for rx fifo to be */
+ while (!((x = getreg (UART_LSR)) & LSR_DR));
+ if ((x & (LSR_BREAK|LSR_FE|LSR_PE|LSR_OE)) && !(x & LSR_ERR)) printf ("LSR7 (0x%02x) ERR @ recv_char\n", x);
+ ASSERT(!(x & LSR_ERR));
+
+ printf ("expected %02x, read %02x\n", ch, r = getreg (UART_RBR));
+ ASSERT (r == ch); /* compare character */
+}
+
+/* Sends a char and checks for errors */
+
+void send_char_no_wait (int ch)
+{
+ report (ch);
+ setreg (UART_THR, ch); /* send character */
+}
+
+void send_char (int ch)
+{
+ report (ch);
+ while (!(getreg (UART_LSR) & LSR_TXFE));
+ NO_ERROR();
+ setreg (UART_THR, ch); /* send character */
+ NO_ERROR();
+}
+
+void init_8n1 ()
+{
+ setreg (UART_IER, 0x00); /* disable interrupts */
+ WAIT();
+ ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */
+ setreg (UART_FCR, 0x07); /* clear RX and TX FIFOs */
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 2 >> 8);
+ setreg (UART_DLL, 2 & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 2 */
+ ASSERT(getreg (UART_LCR) == 0x03);
+ ASSERT (!(getreg (UART_LSR) & 0x1f));
+}
+
+/* Test reset values and r/w properties of some registers */
+
+void register_test ()
+{
+ printf ("register test\n");
+ MARK();
+ { /* test reset values */
+ ASSERT(getreg (UART_RBR) == 0x00); //0
+ ASSERT(getreg (UART_IER) == 0x00); //1
+ ASSERT(getreg (UART_IIR) == 0xc1); //2
+ ASSERT(getreg (UART_LCR) == 0x03); //3
+ ASSERT(getreg (UART_MCR) == 0x00); //4
+ ASSERT(getreg (UART_LSR) == 0x60); //5
+ ASSERT(getreg (UART_MSR) == 0x00); //6
+ ASSERT(getreg (UART_SCR) == 0x00); //7
+
+ setreg(UART_LCR, LCR_DIVL); //enable latches
+ ASSERT(getreg (UART_DLL) == 0x00); //0
+ ASSERT(getreg (UART_DLH) == 0x00); //1
+ setreg(UART_LCR, 0x00); //disable latches
+ }
+ setreg(UART_LCR, 0x00); //disable latches igor
+ setreg(UART_LCR, 0x00); //disable latches
+ setreg(UART_LCR, 0x00); //disable latches
+ setreg(UART_LCR, 0x00); //disable latches
+ setreg(UART_LCR, 0x00); //disable latches
+
+ MARK();
+ { /* test if status registers are read only */
+ unsigned long tmp;
+ int i;
+ tmp = getreg (UART_LSR);
+ setreg (UART_LSR, ~tmp);
+ ASSERT(getreg (UART_LSR) == tmp);
+
+ for (i = 0; i < 9; i++) {
+ setreg (UART_LSR, 1 << i);
+ ASSERT(getreg (UART_LSR) == tmp);
+ }
+
+ tmp = getreg (UART_MSR);
+ setreg (UART_MSR, ~tmp);
+ ASSERT(getreg (UART_MSR) == tmp);
+
+ for (i = 0; i < 9; i++) {
+ setreg (UART_MSR, 1 << i);
+ ASSERT(getreg (UART_MSR) == tmp);
+ }
+ }
+
+ MARK();
+ { /* test whether MCR is write only, be careful not to set the loopback bit */
+ ASSERT(getreg (UART_MCR) == 0x00);
+ setreg (UART_MCR, 0x45);
+ ASSERT(getreg (UART_MCR) == 0x00);
+ setreg (UART_MCR, 0xaa);
+ ASSERT(getreg (UART_MCR) == 0x00);
+ }
+ ASSERT (!(getreg (UART_LSR) & 0x1f));
+ MARK();
+ { /* Test if Divisor latch byte holds the data */
+ int i;
+ setreg(UART_LCR, LCR_DIVL); //enable latches
+ ASSERT(getreg (UART_LCR) == LCR_DIVL);
+ for (i = 0; i < 16; i++) {
+ unsigned short tmp = 0xdead << i;
+ setreg (UART_DLH, tmp >> 8);
+ setreg (UART_DLL, tmp & 0xff);
+ ASSERT(getreg (UART_DLL) == (tmp & 0xff)); //0
+ ASSERT(getreg (UART_DLH) == (tmp >> 8)); //1
+ }
+ setreg (UART_DLH, 0xa1); //igor
+ setreg (UART_DLH, 0xa1); //igor
+ setreg (UART_DLH, 0xa1); //igor
+ setreg (UART_DLH, 0xa1); //igor
+ setreg (UART_DLH, 0xa1); //igor
+
+ ASSERT (!(getreg (UART_LSR) & 0x1f));
+ for (i = 0; i < 16; i++) {
+ unsigned short tmp = 0xdead << i;
+ setreg (UART_DLL, tmp >> 8);
+ setreg (UART_DLH, tmp & 0xff);
+ ASSERT(getreg (UART_DLL) == (tmp >> 8)); //1
+ ASSERT(getreg (UART_DLH) == (tmp & 0xff)); //0
+ }
+ setreg (UART_DLH, 0xa2); //igor
+ setreg (UART_DLH, 0xa2); //igor
+ setreg (UART_DLH, 0xa2); //igor
+ setreg (UART_DLH, 0xa2); //igor
+ setreg (UART_DLH, 0xa2); //igor
+
+ setreg(UART_LCR, 0x00); //disable latches
+ ASSERT(getreg (UART_LCR) == 0x00);
+ ASSERT (!(getreg (UART_LSR) & 0x1f));
+ }
+ MARK();
+ { /* Test LCR, if it holds our data */
+ int i;
+ for (i = 0; i < 6; i++) {
+ unsigned short tmp = (0xde << i) & 0x3f;
+ setreg (UART_LCR, tmp);
+ ASSERT(getreg (UART_LCR) == tmp);
+ }
+ ASSERT (!(getreg (UART_LSR) & 0x1f));
+ }
+ setreg (UART_LCR, 0xa3); //igor
+ setreg (UART_LCR, 0xa3); //igor
+ setreg (UART_LCR, 0xa3); //igor
+ setreg (UART_LCR, 0xa3); //igor
+ setreg (UART_LCR, 0xa3); //igor
+
+ MARK ();
+
+ { /* SCR Test :))) */
+ int i;
+ setreg (UART_SCR, 0);
+ ASSERT (getreg (UART_SCR) == 0);
+ setreg (UART_SCR, 0xff);
+ ASSERT (getreg (UART_SCR) == 0xff);
+ for (i = 0; i < 16; i++) {
+ unsigned char tmp = 0xdead << i;
+ setreg (UART_SCR, tmp);
+ ASSERT (getreg (UART_SCR) == tmp);
+ }
+ }
+ setreg (UART_SCR, 0xa5);//igor
+ setreg (UART_SCR, 0xa5);//igor
+ setreg (UART_SCR, 0xa5);//igor
+ setreg (UART_SCR, 0xa5);//igor
+ setreg (UART_SCR, 0xa5);//igor
+
+ MARK();
+ /* Other registers will be tested later, if they function correctly,
+ since we cannot test them now, without destroying anything. */
+}
+
+/* Initializes uart and sends a few bytes to VAPI. It is then activated and send something back. */
+
+void send_recv_test ()
+{
+ char *s;
+ printf ("send_recv_test\n");
+ /* Init */
+ MARK();
+
+ //printf ("basic\n");
+ ASSERT (!(getreg (UART_LSR) & LSR_DR));
+ MARK();
+
+ /* Send a string */
+ s = "send_";
+ while (*s) {
+ /* Wait for tx fifo to be empty */
+ send_char (*s);
+ report((unsigned long)*s);
+ s++;
+ }
+ ASSERT (!(getreg (UART_LSR) & LSR_DR));
+ s = "test_";
+ while (*s) {
+ /* Wait for tx fifo and tx to be empty */
+ while (!(getreg (UART_LSR) & LSR_TXE));
+ NO_ERROR();
+ setreg (UART_THR, *s); /* send character */
+ NO_ERROR();
+ s++;
+ }
+ ASSERT (!(getreg (UART_LSR) & LSR_DR));
+ MARK();
+
+ /* Send characters with delay inbetween */
+ s = "is_running";
+ while (*s) {
+ int i;
+ send_char (*s);
+// igor for (i = 0; i < 1600; i++) /* wait at least ten chars before sending next one */
+ for (i = 0; i < 16; i++) /* wait at few chars before sending next one */
+ asm volatile ("l.nop");
+ s++;
+ }
+
+ send_char (0); /* send terminate char */
+ MARK();
+
+ /* Receives and compares the string */
+ s = "recv";
+ while (*s) recv_char (*s++);
+ MARK();
+ printf ("OK\n");
+}
+
+/* sends break in both directions */
+
+void break_test ()
+{
+ unsigned x;
+ char *s;
+ printf ("break_test\n");
+
+ MARK();
+ /* Send a break */
+ NO_ERROR();
+ MARK();
+ setreg (UART_LCR, 0x03 | LCR_BREAK); /* 8N1 */
+ MARK();
+ send_char ('b'); /* make sure it is recognised as a break */
+ MARK();
+ recv_char ('*');
+ setreg (UART_LCR, 0x03); /* deleting break bit, 8N1 */
+ MARK();
+
+ /* Receive a break */
+ send_char ('!');
+ MARK();
+ while (!((x = getreg (UART_LSR)) & LSR_DR));
+ /* we should receive zero character with broken frame and break bit should be set */
+ printf("[%x]\n", (LSR_DR | LSR_BREAK | LSR_ERR | LSR_TXFE | LSR_TXE));
+ ASSERT (x == (LSR_DR | LSR_BREAK | LSR_ERR | LSR_TXFE | LSR_TXE));
+ ASSERT (getreg (UART_RBR) == 0);
+ MARK();
+
+ /* Send a # to release break */
+ setreg (UART_THR, '#');
+ while (!(getreg (UART_LSR) & LSR_DR));
+ NO_ERROR(); /* BREAK bit should be cleared now */
+ ASSERT (getreg (UART_RBR) == '$');
+ MARK();
+
+ /* Break while sending characters */
+ s = "ns";
+ while (*s) send_char (*s++);
+ ASSERT (!(getreg (UART_LSR) & LSR_DR));
+ while (!(getreg (UART_LSR) & LSR_TXE)); /* Wait till we send everything */
+ /* this should break the * char, so it should not be received */
+ setreg (UART_THR, '*');
+ setreg (UART_LCR, 0x3 | LCR_BREAK);
+ MARK();
+
+ /* Drop the break, when we get acknowledge */
+ recv_char ('?');
+ setreg (UART_LCR, 0x3);
+ NO_ERROR();
+ MARK();
+
+ /* Receive a break */
+ send_char ('#');
+ while (!((x = getreg (UART_LSR)) & LSR_DR));
+ /* we should receive zero character with broken frame and break bit
+ should not be set, because we cleared it */
+ printf("[%x:%x]\n", x, (LSR_DR | LSR_BREAK |LSR_ERR | LSR_TXFE | LSR_TXE));
+ ASSERT (x == (LSR_DR | LSR_BREAK |LSR_ERR | LSR_TXFE | LSR_TXE));
+ ASSERT (getreg (UART_RBR) == 0);
+ MARK();
+ send_char ('?');
+ MARK();
+ while (!(getreg (UART_LSR) & LSR_DR));
+ recv_char ('!');
+ printf ("OK\n");
+}
+
+/* Tries to send data in different modes in both directions */
+
+/* Utility function, that tests current configuration */
+void test_mode (int nbits)
+{
+ unsigned mask = (1 << nbits) - 1;
+ send_char (0x55);
+#if DETAILED
+ send_char (0x55);
+ recv_char (0x55 & mask);
+#endif
+ recv_char (0x55 & mask);
+ send_char ('a'); // 0x61
+#if DETAILED
+ send_char ('a'); // 0x61
+ recv_char ('a' & mask);
+#endif
+ recv_char ('a' & mask);
+}
+
+void different_modes_test ()
+{
+ int speed, parity, length;
+ printf ("different modes test\n");
+ init_8n1();
+
+ /* Init */
+ MARK();
+ ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */
+ MARK();
+
+ /* Test different speeds */
+ for (speed = 1; speed < 5; speed++) {
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, speed >> 8);
+ setreg (UART_DLL, speed & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 10 => 160 instructions for one cycle */
+ test_mode (8);
+ MARK();
+ }
+ MARK();
+
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 1 >> 8);
+ setreg (UART_DLL, 1 & 0xff);
+ MARK();
+
+ /* Test all parity modes with different char lengths */
+ for (parity = 0; parity < 8; parity++)
+ for (length = 0; length < 4; length++) {
+ setreg (UART_LCR, length | (0 << 2) | (parity << 3));
+ test_mode (5 + length);
+ MARK();
+ }
+ MARK();
+
+ /* Test configuration, if we have >1 stop bits */
+ for (length = 0; length < 4; length++) {
+ setreg (UART_LCR, length | (1 << 2) | (0 << 3));
+ test_mode (5 + length);
+ MARK();
+ }
+ MARK();
+
+ /* Restore normal mode */
+ send_char ('T');
+ while (getreg (UART_LSR) != 0x60); /* Wait for THR to be empty */
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 2 >> 8);
+ setreg (UART_DLL, 2 & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 2 */
+ MARK();
+ while (!(getreg (UART_LSR) & 1)); /* Receive 'x' char */
+ getreg (UART_RBR);
+ MARK();
+
+ send_char ('T');
+ while (getreg (UART_LSR) != 0x60); /* Wait for THR to be empty */
+ MARK();
+ printf ("OK\n");
+}
+
+/* Test various FIFO levels, break and framing error interrupt, etc */
+
+void interrupt_test ()
+{
+ int i;
+ printf ("interrupt_test\n");
+ /* Configure UART for interrupt mode */
+ ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 12 >> 8); /* Set relatively slow speed, so we can hanlde interrupts properly */
+ setreg (UART_DLL, 12 & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 6 */
+
+ ASSERT (int_cnt == 0); /* We should not have got any interrupts before this test */
+ setreg (UART_FCR, 0x01); /* Set trigger level = 1 char, fifo should not be reset */
+ setreg (UART_IER, 0x07); /* Enable interrupts: line status, THR empty, data ready */
+
+ while (!int_cnt); /* Clear previous THR interrupt */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ /* I am configured - start interrupt test */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ int_rbr = '0';
+ while (!int_cnt); /* Wait for DR */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc4);
+ ASSERT (int_lsr == 0x61);
+ ASSERT (int_cnt == 0); /* no interrupts should be pending */
+ MARK();
+
+ setreg (UART_FCR, 0x41); /* Set trigger level = 4 chars, fifo should not be reset */
+
+ /* Everything ok here, send me 4 more */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ int_rbr = '1';
+ while (!int_cnt); /* Wait for DR */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc4);
+ ASSERT (int_lsr == 0x61);
+ MARK();
+
+ setreg (UART_FCR, 0x81); /* Set trigger level = 8 chars, fifo should not be reset */
+
+ /* Everything ok here, send me 5 more */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ int_rbr = '2';
+ while (!int_cnt); /* Wait for DR */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc4);
+ ASSERT (int_lsr == 0x61);
+ MARK();
+
+ setreg (UART_FCR, 0xc1); /* Set trigger level = 14 chars, fifo should not be reset */
+
+ /* Everything ok here, send me 7 more */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ int_rbr = '3';
+ while (!int_cnt); /* Wait for DR */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc4);
+ ASSERT (int_lsr == 0x61);
+ MARK();
+
+ /* Everything ok here, send me 4 more - fifo should be full OE should occur */
+ setreg (UART_IER, 0x06); /* Enable interrupts: line status, THR empty */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ while (!int_cnt); /* Wait for OE */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc6);
+ ASSERT (int_lsr == 0xe3); /* OE flag should be set */
+ ASSERT (getreg (UART_LSR) == 0x61); /* LSR should be cleared by previous read */
+ ASSERT (getreg (UART_IIR) == 0xc1); /* No interrupts should be pending */
+ MARK();
+
+ /* Check if we got everything */
+ ASSERT (int_cnt == 0); /* no interrupts should be pending */
+ for (i = 0; i < 3; i++) {
+ recv_char ("456"[i]); /* WARNING: read should not cause interrupt even if we step over trigger */
+ MARK ();
+ }
+ /* It is now safe to enable data ready interrupt */
+ setreg (UART_IER, 0x07); /* Enable interrupts: line status, THR empty, data ready */
+
+ /* Check if we got everything */
+ for (i = 0; i < 13; i++) {
+ recv_char ("789abcdefghij"[i]); /* WARNING: read should not cause interrupt even if we step over trigger */
+ MARK ();
+ }
+
+ ASSERT (int_cnt == 0); /* no interrupts should be pending */
+ ASSERT (getreg (UART_LSR) == 0x60); /* FIFO should be empty */
+
+ getreg (UART_RBR); /* check for FIFO counter overflow - fifo must still be empty */
+ ASSERT (getreg (UART_LSR) == 0x60); /* FIFO should be empty */
+
+ /* check for break interrupt */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ while (!int_cnt); /* Wait for break interrupt */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc6);
+ ASSERT (int_lsr == 0xf1); /* BE flag should be set */
+ ASSERT (getreg (UART_LSR) == 0x61); /* BE flag should be cleared by previous read */
+ MARK();
+ recv_char (0);
+ MARK();
+
+ send_char ('B'); /* Release break */
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+ /* Wait for acknowledge */
+ int_rbr = '$';
+ while (!int_cnt); /* Wait for timeout */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xcc);
+ ASSERT (int_lsr == 0x61);
+ MARK();
+
+ /* TODO: Check for parity error */
+ /* TODO: Check for frame error */
+
+ /* Check for timeout */
+ send_char ('I');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ int_rbr = 'T';
+ while (!int_cnt); /* Wait for timeout */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xcc); /* timeout interrupt occured */
+ ASSERT (int_lsr == 0x61); /* DR flag should be set */
+ ASSERT (getreg (UART_LSR) == 0x60); /* DR flag should be cleared - timeout occurred */
+ MARK();
+
+ send_char ('T');
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc2);
+ ASSERT ((int_lsr & 0xbe) == 0x20);
+ MARK();
+
+ setreg (UART_IER, 0x00); /* Disable interrupts */
+ ASSERT (int_cnt == 0); /* no interrupts should be pending */
+ NO_ERROR ();
+
+ while (getreg (UART_LSR) != 0x60); /* wait till we sent everynthing and then change mode */
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 2 >> 8); /* Set relatively slow speed, so we can hanlde interrupts properly */
+ setreg (UART_DLL, 2 & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 2 */
+ send_char ('T');
+
+ MARK ();
+ printf ("OK\n");
+}
+
+/* Test if all control bits are set correctly. Lot of this was already tested
+ elsewhere and tests are not duplicated. */
+
+void control_register_test ()
+{
+ /* RBR already tested in send_recv_test() */
+ /* THR already tested in send_recv_test() */
+ /* IER already tested in interrupt_test() */
+ /* IIR already tested in interrupt_test() */
+ /* FCR0 - uart 16450 specific, not tested */
+
+ /* FCR1 - reset rx FIFO */
+ send_char ('*');
+ NO_ERROR ();
+ while (!(getreg (UART_LSR) & 0x01)); /* Wait for data ready */
+ setreg (UART_FCR, 2); /* Clears rx fifo */
+ ASSERT (getreg (UART_LSR) == 0x60); /* nothing happening */
+ send_char ('!');
+ recv_char ('!');
+ MARK ();
+
+ /* FCR2 - reset tx FIFO */
+send_char_no_wait ('1');
+send_char_no_wait ('2');
+// send_char ('1');
+// send_char ('2');
+ setreg (UART_FCR, 4); /* Should clear '2' from fifo, but '1' should be sent OK */
+ ASSERT (getreg (UART_LSR) == 0x00); /* we should still be sending '1' */
+ NO_ERROR();
+ send_char ('*');
+ recv_char ('*');
+ MARK ();
+
+ /* LCR already tested in different_modes_test () */
+ /* TODO: MSR */
+ /* LSR already tested in different_modes_test () and interrupt_test() */
+ /* SCR already tested in register_test () */
+
+ MARK ();
+ printf ("OK\n");
+}
+
+/* Tests parity error and frane error behaviour */
+
+void line_error_test ()
+{
+ printf ("line_error_test\n");
+
+ /* Test framing error if we change speed */
+ setreg (UART_LCR, LCR_DIVL);
+ setreg (UART_DLH, 12 >> 8);
+ setreg (UART_DLL, 12 & 0xff);
+ setreg (UART_LCR, 0x03); /* 8N1 @ 3 */
+ MARK();
+
+ send_char ('c');
+ ASSERT (int_cnt == 0);
+ setreg (UART_IER, 0x04); /* Enable interrupts: line status */
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc6);
+ ASSERT (int_lsr == 0xe9); /* Framing error and FIFO error */
+ getreg (UART_RBR); /* Ignore the data */
+ MARK ();
+ recv_char ('b');
+ MARK ();
+
+#if COMPLETE
+ /* Test framing error if we change stop bits */
+ send_char ('*');
+ while (getreg (UART_LSR)); /* wait till we sent everynthing and then change mode */
+ setreg (UART_LCR, 0x07); /* 8N2 */
+ send_char ('*');
+ MARK ();
+
+ ASSERT (int_cnt == 0);
+ setreg (UART_IER, 0x04); /* Enable interrupts: line status */
+ while (!int_cnt); /* Wait for THR to be empty */
+ ASSERT (--int_cnt == 0);
+ ASSERT (int_iir == 0xc6);
+ ASSERT (int_lsr == 0xe9); /* Framing error and FIFO error */
+ getreg (UART_RBR); /* Ignore the data */
+ recv_char ('b');
+ MARK();
+#endif
+
+ MARK ();
+ printf ("OK\n");
+}
+
+int main ()
+{
+ /* Use our low priority interrupt handler */
+ excpt_int = (unsigned long)interrupt_handler;
+
+ /* Enable interrupts */
+ mtspr (SPR_SR, mfspr(SPR_SR) | SPR_SR_IEE);
+ mtspr (SPR_PICMR, mfspr(SPR_PICMR) | (0x00000001L << UART_INT_LINE));
+
+ int_cnt = 0;
+ int_iir = 0;
+ int_lsr = 0;
+ int_rbr = 0;
+
+ register_test ();
+ init_8n1 ();
+ send_recv_test ();
+ break_test ();
+ different_modes_test ();
+ interrupt_test ();
+ control_register_test ();
+ line_error_test ();
+
+ /* loopback_test ();
+ modem_test ();
+ modem_error_test ();*/
+ recv_char ('@');
+ printf ("ALL TESTS PASSED\n");
+ return 0;
+}
acv_uart.c
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: acv_uart.cfg
===================================================================
--- acv_uart.cfg (nonexistent)
+++ acv_uart.cfg (revision 1765)
@@ -0,0 +1,67 @@
+section memory
+ /*random_seed = 12345
+ type = random*/
+ pattern = 0x00
+ type = unknown /* Fastest */
+
+ nmemories = 2
+ device 0
+ name = "FLASH"
+ ce = 0
+ baseaddr = 0xf0000000
+ size = 0x00200000
+ delayr = 1
+ delayw = -1
+ enddevice
+
+ device 1
+ name = "RAM"
+ ce = 1
+ baseaddr = 0x00000000
+ size = 0x00200000
+ delayr = 1
+ delayw = 1
+ enddevice
+end
+
+section mc
+ enabled = 1
+ baseaddr = 0x93000000
+ POC = 0x00000008 /* Power on configuration register */
+end
+
+section cpu
+ ver = 0x1200
+ rev = 0x0001
+ /* upr = */
+ superscalar = 0
+ hazards = 0
+ dependstats = 0
+end
+
+section sim
+ debug = 4
+ verbose = 1
+ exe_log = 1
+ exe_log_fn = "executed.log"
+end
+
+section uart
+ nuarts = 1
+
+ device 0
+ baseaddr = 0x9c000000
+ jitter = -1 /* async behaviour */
+ 16550 = 1
+ irq = 19
+ vapi_id = 0x100
+ enddevice
+end
+
+section VAPI
+ enabled = 1
+ log_enabled = 1
+ hide_device_id = 1
+ vapi_log_fn = "vapi.log"
+ server_port = 9100
+end
acv_uart.cfg
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: mmu.c
===================================================================
--- mmu.c (nonexistent)
+++ mmu.c (revision 1765)
@@ -0,0 +1,1291 @@
+/* This is MMU test for OpenRISC 1200 */
+
+#include "spr_defs.h"
+#include "support.h"
+
+/* For shorter simulation run */
+#define RTL_SIM 1
+
+/* Define RAM physical location and size
+ Bottom half will be used for this program, the rest
+ will be used for testing */
+#define FLASH_START 0xf0000000
+#define FLASH_SIZE 0x00200000
+#define RAM_START 0x00000000
+#define RAM_SIZE 0x00200000
+
+/* What is the last address in ram that is used by this program */
+#define TEXT_END_ADD (FLASH_START + (FLASH_SIZE / 2))
+#define DATA_END_ADD (RAM_START + (RAM_SIZE / 2))
+
+#define TLB_TEXT_SET_NB 8
+#define TLB_DATA_SET_NB 4
+
+/* MMU page size */
+#define PAGE_SIZE 8192
+
+/* Number of DTLB sets used (power of 2, max is 256) */
+#define DTLB_SETS 64
+
+/* Number of DTLB ways (1, 2, 3 etc., max is 4). */
+#define DTLB_WAYS 1
+
+/* Number of ITLB sets used (power of 2, max is 256) */
+#define ITLB_SETS 64
+
+/* Number of ITLB ways (1, 2, 3 etc., max is 4). */
+#define ITLB_WAYS 1
+
+/* TLB mode codes */
+#define TLB_CODE_ONE_TO_ONE 0x00000000
+#define TLB_CODE_PLUS_ONE_PAGE 0x10000000
+#define TLB_CODE_MINUS_ONE_PAGE 0x20000000
+
+#define TLB_CODE_MASK 0xfffff000
+#define TLB_PR_MASK 0x00000fff
+#define DTLB_PR_NOLIMIT ( SPR_DTLBTR_CI | \
+ SPR_DTLBTR_URE | \
+ SPR_DTLBTR_UWE | \
+ SPR_DTLBTR_SRE | \
+ SPR_DTLBTR_SWE )
+
+#define ITLB_PR_NOLIMIT ( SPR_ITLBTR_CI | \
+ SPR_ITLBTR_SXE | \
+ SPR_ITLBTR_UXE )
+
+#if 1
+#define debug printf
+#else
+#define debug
+#endif
+
+/* fails if x is false */
+#define ASSERT(x) ((x)?1: fail (__FUNCTION__, __LINE__))
+
+//#define TEST_JUMP(x) testjump( ((x) & (RAM_SIZE/2 - 1)) + DATA_END_ADD, (x))
+#define TEST_JUMP(x) copy_jump (((x) & (RAM_SIZE/2 - 1)) + DATA_END_ADD); call (x)
+
+/* Extern functions */
+extern void lo_dmmu_en (void);
+extern void lo_immu_en (void);
+extern int lo_dtlb_ci_test (unsigned long, unsigned long);
+extern int lo_itlb_ci_test(unsigned long, unsigned long);
+extern void testjump(unsigned long phy_addr, unsigned long virt_addr);
+extern void (*jr)(void);
+
+/* Local functions prototypes */
+void dmmu_disable (void);
+void immu_disable (void);
+
+/* Global variables */
+extern unsigned long ram_end;
+
+/* DTLB mode status */
+volatile unsigned long dtlb_val;
+
+/* ITLB mode status */
+volatile unsigned long itlb_val;
+
+/* DTLB miss counter */
+volatile int dtlb_miss_count;
+
+/* Data page fault counter */
+volatile int dpage_fault_count;
+
+/* ITLB miss counter */
+volatile int itlb_miss_count;
+
+/* Instruction page fault counter */
+volatile int ipage_fault_count;
+
+/* EA of last DTLB miss exception */
+unsigned long dtlb_miss_ea;
+
+/* EA of last data page fault exception */
+unsigned long dpage_fault_ea;
+
+/* EA of last ITLB miss exception */
+unsigned long itlb_miss_ea;
+
+/* EA of last insn page fault exception */
+unsigned long ipage_fault_ea;
+
+void sys_call (void)
+{
+ asm("l.sys\t0");
+}
+
+void fail (char *func, int line)
+{
+#ifndef __FUNCTION__
+#define __FUNCTION__ "?"
+#endif
+
+ /* Trigger sys call exception to enable supervisor mode again */
+ sys_call ();
+
+ immu_disable ();
+ dmmu_disable ();
+
+ debug("Test failed in %s:%i\n", func, line);
+ report (0xeeeeeeee);
+ exit (1);
+}
+
+void call(unsigned long add)
+{
+ asm("l.jalr\t\t%0" : : "r" (add) : "r9", "r11");
+ asm("l.nop" : :);
+}
+
+void jump(void)
+{
+ asm("_jr:");
+ asm("l.jr\t\tr9") ;
+ asm("l.nop" : :);
+}
+
+void copy_jump(unsigned long phy_add)
+{
+ memcpy((void *)phy_add, (void *)&jr, 8);
+}
+
+/* Bus error exception handler */
+void bus_err_handler (void)
+{
+ /* This shouldn't happend */
+ debug("Test failed: Bus error\n");
+ report (0xeeeeeeee);
+ exit (1);
+}
+
+/* Illegal insn exception handler */
+void ill_insn_handler (void)
+{
+ /* This shouldn't happend */
+ debug("Test failed: Illegal insn\n");
+ report (0xeeeeeeee);
+ exit (1);
+}
+
+/* Sys call exception handler */
+void sys_call_handler (void)
+{
+ /* Set supervisor mode */
+ mtspr (SPR_ESR_BASE, mfspr (SPR_ESR_BASE) | SPR_SR_SM);
+}
+
+/* DTLB miss exception handler */
+void dtlb_miss_handler (void)
+{
+ unsigned long ea, ta, tlbtr;
+ int set, way = 0;
+ int i;
+
+ /* Get EA that cause the exception */
+ ea = mfspr (SPR_EEAR_BASE);
+
+ /* Find TLB set and LRU way */
+ set = (ea / PAGE_SIZE) % DTLB_SETS;
+ for (i = 0; i < DTLB_WAYS; i++) {
+ if ((mfspr (SPR_DTLBMR_BASE(i) + set) & SPR_DTLBMR_LRU) == 0) {
+ way = i;
+ break;
+ }
+ }
+
+ debug("ea = %.8lx set = %d way = %d\n", ea, set, way);
+
+ if (((RAM_START <= ea) && (ea < DATA_END_ADD) ) || ((FLASH_START <= ea) && (ea < TEXT_END_ADD))) {
+ /* If this is acces to data of this program set one to one translation */
+ mtspr (SPR_DTLBMR_BASE(way) + set, (ea & SPR_DTLBMR_VPN) | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(way) + set, (ea & SPR_DTLBTR_PPN) | DTLB_PR_NOLIMIT);
+ return;
+ }
+
+ /* Update DTLB miss counter and EA */
+ dtlb_miss_count++;
+ dtlb_miss_ea = ea;
+
+ /* Whatever access is in progress, translated address have to point to physical RAM */
+ ta = (ea & ((RAM_SIZE/2) - 1)) + RAM_START + (RAM_SIZE/2);
+ tlbtr = (ta & SPR_DTLBTR_PPN) | (dtlb_val & TLB_PR_MASK);
+ debug("tlbtr = %.8lx dtlb_val = %.8lx\n", tlbtr, dtlb_val);
+
+ /* Set DTLB entry */
+ mtspr (SPR_DTLBMR_BASE(way) + set, (ea & SPR_DTLBMR_VPN) | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(way) + set, tlbtr);
+}
+
+/* Data page fault exception handler */
+void dpage_fault_handler (void)
+{
+ unsigned long ea;
+ int set, way = 0;
+ int i;
+
+ /* Get EA that cause the exception */
+ ea = mfspr (SPR_EEAR_BASE);
+
+ /* Find TLB set and way */
+ set = (ea / PAGE_SIZE) % DTLB_SETS;
+ for (i = 0; i < DTLB_WAYS; i++) {
+ if ((mfspr (SPR_DTLBMR_BASE(i) + set) & SPR_DTLBMR_VPN) == (ea & SPR_DTLBMR_VPN)) {
+ way = i;
+ break;
+ }
+ }
+
+ debug("ea = %.8lx set = %d way = %d\n", ea, set, way);
+
+ if (((RAM_START <= ea) && (ea < DATA_END_ADD) ) || ((FLASH_START <= ea) && (ea < TEXT_END_ADD))) {
+ /* If this is acces to data of this program set one to one translation */
+ mtspr (SPR_DTLBTR_BASE(way) + set, (ea & SPR_DTLBTR_PPN) | DTLB_PR_NOLIMIT);
+ return;
+ }
+
+ /* Update data page fault counter and EA */
+ dpage_fault_count++;
+ dpage_fault_ea = ea;
+
+ /* Give permission */
+ mtspr (SPR_DTLBTR_BASE(way) + set, (mfspr (SPR_DTLBTR_BASE(way) + set) & ~DTLB_PR_NOLIMIT) | dtlb_val);
+}
+
+
+/* ITLB miss exception handler */
+void itlb_miss_handler (void)
+{
+ unsigned long ea, ta, tlbtr;
+ int set, way = 0;
+ int i;
+
+ /* Get EA that cause the exception */
+ ea = mfspr (SPR_EEAR_BASE);
+
+ /* Find TLB set and LRU way */
+ set = (ea / PAGE_SIZE) % ITLB_SETS;
+ for (i = 0; i < ITLB_WAYS; i++) {
+ if ((mfspr (SPR_ITLBMR_BASE(i) + set) & SPR_ITLBMR_LRU) == 0) {
+ way = i;
+ break;
+ }
+ }
+
+ debug("ea = %.8lx set = %d way = %d\n", ea, set, way);
+
+ if ((FLASH_START <= ea) && (ea < TEXT_END_ADD)) {
+ /* If this is acces to data of this program set one to one translation */
+ mtspr (SPR_ITLBMR_BASE(way) + set, (ea & SPR_ITLBMR_VPN) | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(way) + set, (ea & SPR_ITLBTR_PPN) | ITLB_PR_NOLIMIT);
+ return;
+ }
+
+ /* Update ITLB miss counter and EA */
+ itlb_miss_count++;
+ itlb_miss_ea = ea;
+
+ /* Whatever access is in progress, translated address have to point to physical RAM */
+ ta = (ea & ((RAM_SIZE/2) - 1)) + DATA_END_ADD;
+ tlbtr = (ta & SPR_ITLBTR_PPN) | (itlb_val & TLB_PR_MASK);
+
+ debug("ta = %.8lx\n", ta);
+
+ /* Set ITLB entry */
+ mtspr (SPR_ITLBMR_BASE(way) + set, (ea & SPR_ITLBMR_VPN) | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(way) + set, tlbtr);
+}
+
+/* Intstruction page fault exception handler */
+void ipage_fault_handler (void)
+{
+ unsigned long ea;
+ int set, way = 0;
+ int i;
+
+ /* Get EA that cause the exception */
+ ea = mfspr (SPR_EEAR_BASE);
+
+ /* Find TLB set and way */
+ set = (ea / PAGE_SIZE) % ITLB_SETS;
+ for (i = 0; i < ITLB_WAYS; i++) {
+ if ((mfspr (SPR_ITLBMR_BASE(i) + set) & SPR_ITLBMR_VPN) == (ea & SPR_ITLBMR_VPN)) {
+ way = i;
+ break;
+ }
+ }
+
+ debug("ea = %.8lx set = %d way = %d\n", ea, set, way);
+
+ if ((FLASH_START <= ea) && (ea < TEXT_END_ADD)) {
+ /* If this is acces to data of this program set one to one translation */
+ mtspr (SPR_DTLBTR_BASE(way) + set, (ea & SPR_DTLBTR_PPN) | ITLB_PR_NOLIMIT);
+ return;
+ }
+
+ /* Update instruction page fault counter and EA */
+ ipage_fault_count++;
+ ipage_fault_ea = ea;
+
+ /* Give permission */
+ mtspr (SPR_ITLBTR_BASE(way) + set, (mfspr (SPR_ITLBTR_BASE(way) + set) & ~ITLB_PR_NOLIMIT) | itlb_val);
+}
+
+/* Invalidate all entries in DTLB and enable DMMU */
+void dmmu_enable (void)
+{
+ /* Register DTLB miss handler */
+ excpt_dtlbmiss = (unsigned long)dtlb_miss_handler;
+
+ /* Register data page fault handler */
+ excpt_dpfault = (unsigned long)dpage_fault_handler;
+
+ /* Enable DMMU */
+ lo_dmmu_en ();
+}
+
+/* Disable DMMU */
+void dmmu_disable (void)
+{
+ mtspr (SPR_SR, mfspr (SPR_SR) & ~SPR_SR_DME);
+}
+
+/* Invalidate all entries in ITLB and enable IMMU */
+void immu_enable (void)
+{
+ /* Register ITLB miss handler */
+ excpt_itlbmiss = (unsigned long)itlb_miss_handler;
+
+ /* Register instruction page fault handler */
+ excpt_ipfault = (unsigned long)ipage_fault_handler;
+
+ /* Enable IMMU */
+ lo_immu_en ();
+}
+
+/* Disable IMMU */
+void immu_disable (void)
+{
+ mtspr (SPR_SR, mfspr (SPR_SR) & ~SPR_SR_IME);
+}
+
+void write_pattern(unsigned long start, unsigned long end)
+{
+ unsigned long add;
+
+ add = start;
+ while (add < end) {
+ REG32(add) = add;
+ add += PAGE_SIZE;
+ }
+
+}
+
+/* Translation address register test
+ Set various translation and check the pattern */
+int dtlb_translation_test (void)
+{
+ int i, j;
+ unsigned long ea, ta;
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ for (j = 0; j < DTLB_SETS; j++) {
+ mtspr (SPR_DTLBMR_BASE(i) + j, 0);
+ mtspr (SPR_DTLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_DATA_SET_NB; i++) {
+ ea = RAM_START + (i*PAGE_SIZE);
+ ta = RAM_START + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(0) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Set dtlb permisions */
+ dtlb_val = DTLB_PR_NOLIMIT;
+
+ /* Write test pattern */
+ for (i = 0; i < DTLB_SETS; i++) {
+ REG32(RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE)) = i;
+ REG32(RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4) = 0xffffffff - i;
+ }
+
+ /* Set one to one translation of the last way of DTLB */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ta = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(DTLB_WAYS - 1) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Enable DMMU */
+ dmmu_enable();
+
+ /* Check the pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ASSERT(REG32(ea) == i);
+ ea = RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4;
+ ASSERT(REG32(ea) == (0xffffffff - i));
+ }
+
+ /* Write new pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ REG32(RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE)) = 0xffffffff - i;
+ REG32(RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4) = i;
+ }
+
+ /* Set 0 -> RAM_START + (RAM_SIZE/2) translation */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = i*PAGE_SIZE;
+ ta = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(DTLB_WAYS - 1) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Check the pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = i*PAGE_SIZE;
+ ASSERT(REG32(ea) == (0xffffffff - i));
+ ea = ((i + 1)*PAGE_SIZE) - 4;
+ ASSERT(REG32(ea) == i);
+ }
+
+ /* Write new pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ REG32(i*PAGE_SIZE) = i;
+ REG32(((i + 1)*PAGE_SIZE) - 4) = 0xffffffff - i;
+ }
+
+ /* Set hi -> lo, lo -> hi translation */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ta = RAM_START + (RAM_SIZE/2) + ((DTLB_SETS - i - 1 + TLB_DATA_SET_NB)*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(DTLB_WAYS - 1) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Check the pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ASSERT(REG32(ea) == (DTLB_SETS - i - 1 + TLB_DATA_SET_NB));
+ ea = RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4;
+ ASSERT(REG32(ea) == (0xffffffff - DTLB_SETS + i + 1 - TLB_DATA_SET_NB));
+ }
+
+ /* Write new pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ REG32(RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE)) = 0xffffffff - i;
+ REG32(RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4) = i;
+ }
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Check the pattern */
+ for (i = TLB_DATA_SET_NB; i < DTLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ASSERT(REG32(ea) == (0xffffffff - DTLB_SETS + i + 1 - TLB_DATA_SET_NB));
+ ea = RAM_START + (RAM_SIZE/2) + ((i + 1)*PAGE_SIZE) - 4;
+ ASSERT(REG32(ea) == (DTLB_SETS - i - 1 + TLB_DATA_SET_NB));
+ }
+
+ return 0;
+}
+
+/* EA match register test
+ Shifting one in DTLBMR and performing accesses to boundaries
+ of the page, checking the triggering of exceptions */
+int dtlb_match_test (int way, int set)
+{
+ int i, j, tmp;
+ unsigned long add, t_add;
+ unsigned long ea, ta;
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ for (j = 0; j < DTLB_SETS; j++) {
+ mtspr (SPR_DTLBMR_BASE(i) + j, 0);
+ mtspr (SPR_DTLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_DATA_SET_NB; i++) {
+ ea = RAM_START + (i*PAGE_SIZE);
+ ta = RAM_START + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(0) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Set dtlb permisions */
+ dtlb_val = DTLB_PR_NOLIMIT;
+
+ /* Set pattern */
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) - 4) = 0x00112233;
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE)) = 0x44556677;
+ REG32(RAM_START + (RAM_SIZE/2) + (set + 1)*PAGE_SIZE - 4) = 0x8899aabb;
+ REG32(RAM_START + (RAM_SIZE/2) + (set + 1)*PAGE_SIZE) = 0xccddeeff;
+
+ /* Enable DMMU */
+ dmmu_enable();
+
+ /* Shifting one in DTLBMR */
+ i = 0;
+ add = (PAGE_SIZE*DTLB_SETS);
+ t_add = add + (set*PAGE_SIZE);
+ while (add != 0x00000000) {
+ mtspr (SPR_DTLBMR_BASE(way) + set, t_add | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(way) + set, (RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE)) | DTLB_PR_NOLIMIT);
+
+ /* Reset DTLB miss counter and EA */
+ dtlb_miss_count = 0;
+ dtlb_miss_ea = 0;
+
+ if (((t_add < RAM_START) || (t_add >= DATA_END_ADD)) && ((t_add < FLASH_START) || (t_add >= TEXT_END_ADD))) {
+
+ /* Read last address of previous page */
+ tmp = REG32(t_add - 4);
+ ASSERT(tmp == 0x00112233);
+ ASSERT(dtlb_miss_count == 1);
+
+ /* Read first address of the page */
+ tmp = REG32(t_add);
+ ASSERT(tmp == 0x44556677);
+ ASSERT(dtlb_miss_count == 1);
+
+ /* Read last address of the page */
+ tmp = REG32(t_add + PAGE_SIZE - 4);
+ ASSERT(tmp == 0x8899aabb);
+ ASSERT(dtlb_miss_count == 1);
+
+ /* Read first address of next page */
+ tmp = REG32(t_add + PAGE_SIZE);
+ ASSERT(tmp == 0xccddeeff);
+ ASSERT(dtlb_miss_count == 2);
+ }
+
+ i++;
+ add = (PAGE_SIZE*DTLB_SETS) << i;
+ t_add = add + (set*PAGE_SIZE);
+
+ for (j = 0; j < DTLB_WAYS; j++) {
+ mtspr (SPR_DTLBMR_BASE(j) + ((set - 1) & (DTLB_SETS - 1)), 0);
+ mtspr (SPR_DTLBMR_BASE(j) + ((set + 1) & (DTLB_SETS - 1)), 0);
+ }
+ }
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ return 0;
+}
+
+/* Valid bit test
+ Set all ways of one set to be invalid, perform
+ access so miss handler will set them to valid,
+ try access again - there should be no miss exceptions */
+int dtlb_valid_bit_test (int set)
+{
+ int i, j;
+ unsigned long ea, ta;
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ for (j = 0; j < DTLB_SETS; j++) {
+ mtspr (SPR_DTLBMR_BASE(i) + j, 0);
+ mtspr (SPR_DTLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_DATA_SET_NB; i++) {
+ ea = RAM_START + (i*PAGE_SIZE);
+ ta = RAM_START + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(0) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Reset DTLB miss counter and EA */
+ dtlb_miss_count = 0;
+ dtlb_miss_ea = 0;
+
+ /* Set dtlb permisions */
+ dtlb_val = DTLB_PR_NOLIMIT;
+
+ /* Resetv DTLBMR for every way */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ mtspr (SPR_DTLBMR_BASE(i) + set, 0);
+ }
+
+ /* Enable DMMU */
+ dmmu_enable();
+
+ /* Perform writes to address, that is not in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ REG32(RAM_START + RAM_SIZE + (i*DTLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)) = i;
+
+ /* Check if there was DTLB miss */
+ ASSERT(dtlb_miss_count == (i + 1));
+ ASSERT(dtlb_miss_ea == (RAM_START + RAM_SIZE + (i*DTLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)));
+ }
+
+ /* Reset DTLB miss counter and EA */
+ dtlb_miss_count = 0;
+ dtlb_miss_ea = 0;
+
+ /* Perform reads to address, that is now in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ ASSERT(REG32(RAM_START + RAM_SIZE + (i*DTLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)) == i);
+
+ /* Check if there was DTLB miss */
+ ASSERT(dtlb_miss_count == 0);
+ }
+
+ /* Reset valid bits */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ mtspr (SPR_DTLBMR_BASE(i) + set, mfspr (SPR_DTLBMR_BASE(i) + set) & ~SPR_DTLBMR_V);
+ }
+
+ /* Perform reads to address, that is now in DTLB but is invalid */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ ASSERT(REG32(RAM_START + RAM_SIZE + (i*DTLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)) == i);
+
+ /* Check if there was DTLB miss */
+ ASSERT(dtlb_miss_count == (i + 1));
+ ASSERT(dtlb_miss_ea == (RAM_START + RAM_SIZE + (i*DTLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)));
+ }
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ return 0;
+}
+
+/* Permission test
+ Set various permissions, perform r/w access
+ in user and supervisor mode and chack triggering
+ of page fault exceptions */
+int dtlb_premission_test (int set)
+{
+ int i, j;
+ unsigned long ea, ta, tmp;
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ for (j = 0; j < DTLB_SETS; j++) {
+ mtspr (SPR_DTLBMR_BASE(i) + j, 0);
+ mtspr (SPR_DTLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_DATA_SET_NB; i++) {
+ ea = RAM_START + (i*PAGE_SIZE);
+ ta = RAM_START + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(0) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + i, ta | DTLB_PR_NOLIMIT);
+ }
+
+ /* Testing page */
+ ea = RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE);
+
+ /* Set match register */
+ mtspr (SPR_DTLBMR_BASE(DTLB_WAYS - 1) + set, ea | SPR_DTLBMR_V);
+
+ /* Reset page fault counter and EA */
+ dpage_fault_count = 0;
+ dpage_fault_ea = 0;
+
+ /* Enable DMMU */
+ dmmu_enable();
+
+ /* Write supervisor */
+ dtlb_val = DTLB_PR_NOLIMIT | SPR_DTLBTR_SWE;
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + set, ea | (DTLB_PR_NOLIMIT & ~SPR_DTLBTR_SWE));
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 0) = 0x00112233;
+ ASSERT(dpage_fault_count == 1);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 4) = 0x44556677;
+ ASSERT(dpage_fault_count == 1);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 8) = 0x8899aabb;
+ ASSERT(dpage_fault_count == 1);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 12) = 0xccddeeff;
+ ASSERT(dpage_fault_count == 1);
+
+ /* Read supervisor */
+ dtlb_val = DTLB_PR_NOLIMIT | SPR_DTLBTR_SRE;
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + set, ea | (DTLB_PR_NOLIMIT & ~SPR_DTLBTR_SRE));
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 0);
+ ASSERT(dpage_fault_count == 2);
+ ASSERT(tmp == 0x00112233);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 4);
+ ASSERT(dpage_fault_count == 2);
+ ASSERT(tmp == 0x44556677);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 8);
+ ASSERT(dpage_fault_count == 2);
+ ASSERT(tmp == 0x8899aabb);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 12);
+ ASSERT(dpage_fault_count == 2);
+ ASSERT(tmp == 0xccddeeff);
+
+ /* Write user */
+ dtlb_val = DTLB_PR_NOLIMIT | SPR_DTLBTR_UWE;
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + set, ea | (DTLB_PR_NOLIMIT & ~SPR_DTLBTR_UWE));
+
+ /* Set user mode */
+ mtspr (SPR_SR, mfspr (SPR_SR) & ~SPR_SR_SM);
+
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 0) = 0xffeeddcc;
+ ASSERT(dpage_fault_count == 3);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 4) = 0xbbaa9988;
+ ASSERT(dpage_fault_count == 3);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 8) = 0x77665544;
+ ASSERT(dpage_fault_count == 3);
+ REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 12) = 0x33221100;
+ ASSERT(dpage_fault_count == 3);
+
+ /* Trigger sys call exception to enable supervisor mode again */
+ sys_call ();
+
+ /* Read user mode */
+ dtlb_val = DTLB_PR_NOLIMIT | SPR_DTLBTR_URE;
+ mtspr (SPR_DTLBTR_BASE(DTLB_WAYS - 1) + set, ea | (DTLB_PR_NOLIMIT & ~SPR_DTLBTR_URE));
+
+ /* Set user mode */
+ mtspr (SPR_SR, mfspr (SPR_SR) & ~SPR_SR_SM);
+
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 0);
+ ASSERT(dpage_fault_count == 4);
+ ASSERT(tmp == 0xffeeddcc);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 4);
+ ASSERT(dpage_fault_count == 4);
+ ASSERT(tmp == 0xbbaa9988);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 8);
+ ASSERT(dpage_fault_count == 4);
+ ASSERT(tmp == 0x77665544);
+ tmp = REG32(RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) + 12);
+ ASSERT(dpage_fault_count == 4);
+ ASSERT(tmp == 0x33221100);
+
+ /* Trigger sys call exception to enable supervisor mode again */
+ sys_call ();
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ return 0;
+}
+
+/* Data cache inhibit bit test
+ Set and clear CI bit and check the pattern. */
+int dtlb_ci_test (void)
+{
+ int i, j;
+ unsigned long ea, ta, ret;
+
+ /* Disable DMMU */
+ dmmu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < DTLB_WAYS; i++) {
+ for (j = 0; j < DTLB_SETS; j++) {
+ mtspr (SPR_DTLBMR_BASE(i) + j, 0);
+ mtspr (SPR_DTLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_DATA_SET_NB; i++) {
+ ea = RAM_START + (i*PAGE_SIZE);
+ ta = RAM_START + (i*PAGE_SIZE);
+ mtspr (SPR_DTLBMR_BASE(0) + i, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + i, ta | DTLB_PR_NOLIMIT | SPR_DTLBTR_CI);
+ }
+
+ /* Testing page */
+ ea = RAM_START + (RAM_SIZE/2) + (TLB_DATA_SET_NB*PAGE_SIZE);
+ ta = RAM_START + (RAM_SIZE/2) + (TLB_DATA_SET_NB*PAGE_SIZE);
+
+ /* Write test pattern */
+ REG32(ea) = 0x01234567;
+ REG32(ea + PAGE_SIZE - 4) = 0x9abcdef;
+
+ /* Set one to one translation with CI bit for testing area */
+ mtspr (SPR_DTLBMR_BASE(0) + TLB_DATA_SET_NB, ea | SPR_DTLBMR_V);
+ mtspr (SPR_DTLBTR_BASE(0) + TLB_DATA_SET_NB, ta | DTLB_PR_NOLIMIT | SPR_DTLBTR_CI);
+
+ ret = lo_dtlb_ci_test(ea, TLB_DATA_SET_NB);
+ ASSERT(ret == 0);
+
+ return 0;
+}
+
+/* Translation address register test
+ Set various translation and check the pattern */
+int itlb_translation_test (void)
+{
+ int i, j;
+ unsigned long ea, ta;
+
+ /* Disable IMMU */
+ immu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ for (j = 0; j < ITLB_SETS; j++) {
+ mtspr (SPR_ITLBMR_BASE(i) + j, 0);
+ mtspr (SPR_ITLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_TEXT_SET_NB; i++) {
+ ea = FLASH_START + (i*PAGE_SIZE);
+ ta = FLASH_START + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(0) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(0) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Set dtlb permisions */
+ itlb_val = ITLB_PR_NOLIMIT;
+
+ /* Write test program */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ copy_jump (RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE) + (i*0x10));
+ }
+
+ /* Set one to one translation of the last way of ITLB */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ta = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(ITLB_WAYS - 1) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(ITLB_WAYS - 1) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Enable IMMU */
+ immu_enable();
+
+ /* Check the pattern */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ call (RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE) + (i*0x10));
+ }
+
+ /* Set FLASH_END -> RAM_START + (RAM_SIZE/2) translation */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ ea = FLASH_START + FLASH_SIZE + i*PAGE_SIZE;
+ ta = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(ITLB_WAYS - 1) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(ITLB_WAYS - 1) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Check the pattern */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ call (FLASH_START + FLASH_SIZE + (i*PAGE_SIZE) + (i*0x10));
+ }
+
+ /* Set hi -> lo, lo -> hi translation */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ ea = RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE);
+ ta = RAM_START + (RAM_SIZE/2) + ((ITLB_SETS - i - 1 + TLB_TEXT_SET_NB)*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(ITLB_WAYS - 1) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(ITLB_WAYS - 1) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Check the pattern */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ call (RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE) + ((ITLB_SETS - i - 1 + TLB_TEXT_SET_NB)*0x10));
+ }
+
+ /* Disable IMMU */
+ immu_disable ();
+
+ /* Check the pattern */
+ for (i = TLB_TEXT_SET_NB; i < ITLB_SETS; i++) {
+ call (RAM_START + (RAM_SIZE/2) + (i*PAGE_SIZE) + (i*0x10));
+ }
+
+ return 0;
+}
+
+/* EA match register test
+ Shifting one in ITLBMR and performing accesses to boundaries
+ of the page, checking the triggering of exceptions */
+int itlb_match_test (int way, int set)
+{
+ int i, j;
+ unsigned long add, t_add;
+ unsigned long ea, ta;
+
+ /* Disable IMMU */
+ immu_disable();
+
+ /* Invalidate all entries in ITLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ for (j = 0; j < ITLB_SETS; j++) {
+ mtspr (SPR_ITLBMR_BASE(i) + j, 0);
+ mtspr (SPR_ITLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_TEXT_SET_NB; i++) {
+ ea = FLASH_START + (i*PAGE_SIZE);
+ ta = FLASH_START + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(0) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(0) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Set dtlb permisions */
+ itlb_val = ITLB_PR_NOLIMIT;
+
+ /* Set pattern */
+ copy_jump (RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE) - 8);
+ copy_jump (RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE));
+ copy_jump (RAM_START + (RAM_SIZE/2) + (set + 1)*PAGE_SIZE - 8);
+ copy_jump (RAM_START + (RAM_SIZE/2) + (set + 1)*PAGE_SIZE);
+
+ /* Enable IMMU */
+ immu_enable();
+
+ /* Shifting one in ITLBMR */
+ i = 0;
+ add = (PAGE_SIZE*ITLB_SETS);
+ t_add = add + (set*PAGE_SIZE);
+ while (add != 0x00000000) {
+ mtspr (SPR_ITLBMR_BASE(way) + set, t_add | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(way) + set, (RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE)) | ITLB_PR_NOLIMIT);
+
+ /* Reset ITLB miss counter and EA */
+ itlb_miss_count = 0;
+ itlb_miss_ea = 0;
+
+ if (((t_add < RAM_START) || (t_add >= DATA_END_ADD)) && ((t_add < FLASH_START) || (t_add >= TEXT_END_ADD))) {
+
+ /* Jump on last address of previous page */
+ call (t_add - 8);
+ ASSERT(itlb_miss_count == 1);
+
+ /* Jump on first address of the page */
+ call (t_add);
+ ASSERT(itlb_miss_count == 1);
+
+ /* Jump on last address of the page */
+ call (t_add + PAGE_SIZE - 8);
+ ASSERT(itlb_miss_count == 1);
+
+ /* Jump on first address of next page */
+ call (t_add + PAGE_SIZE);
+ ASSERT(itlb_miss_count == 2);
+ }
+
+ i++;
+ add = (PAGE_SIZE*ITLB_SETS) << i;
+ t_add = add + (set*PAGE_SIZE);
+
+ for (j = 0; j < ITLB_WAYS; j++) {
+ mtspr (SPR_ITLBMR_BASE(j) + ((set - 1) & (ITLB_SETS - 1)), 0);
+ mtspr (SPR_ITLBMR_BASE(j) + ((set + 1) & (ITLB_SETS - 1)), 0);
+ }
+ }
+
+ /* Disable IMMU */
+ immu_disable();
+
+ return 0;
+}
+
+/* Valid bit test
+ Set all ways of one set to be invalid, perform
+ access so miss handler will set them to valid,
+ try access again - there should be no miss exceptions */
+int itlb_valid_bit_test (int set)
+{
+ int i, j;
+ unsigned long ea, ta;
+
+ /* Disable IMMU */
+ immu_disable();
+
+ /* Invalidate all entries in ITLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ for (j = 0; j < ITLB_SETS; j++) {
+ mtspr (SPR_ITLBMR_BASE(i) + j, 0);
+ mtspr (SPR_ITLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_TEXT_SET_NB; i++) {
+ ea = FLASH_START + (i*PAGE_SIZE);
+ ta = FLASH_START + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(0) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(0) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Reset ITLB miss counter and EA */
+ itlb_miss_count = 0;
+ itlb_miss_ea = 0;
+
+ /* Set itlb permisions */
+ itlb_val = ITLB_PR_NOLIMIT;
+
+ /* Resetv ITLBMR for every way */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ mtspr (SPR_ITLBMR_BASE(i) + set, 0);
+ }
+
+ /* Enable IMMU */
+ immu_enable();
+
+ /* Perform jumps to address, that is not in ITLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ TEST_JUMP(RAM_START + RAM_SIZE + (i*ITLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE));
+
+ /* Check if there was ITLB miss */
+ ASSERT(itlb_miss_count == (i + 1));
+ ASSERT(itlb_miss_ea == (RAM_START + RAM_SIZE + (i*ITLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)));
+ }
+
+ /* Reset ITLB miss counter and EA */
+ itlb_miss_count = 0;
+ itlb_miss_ea = 0;
+
+ /* Perform jumps to address, that is now in ITLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ TEST_JUMP(RAM_START + RAM_SIZE + (i*ITLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE));
+
+ /* Check if there was ITLB miss */
+ ASSERT(itlb_miss_count == 0);
+ }
+
+ /* Reset valid bits */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ mtspr (SPR_ITLBMR_BASE(i) + set, mfspr (SPR_ITLBMR_BASE(i) + set) & ~SPR_ITLBMR_V);
+ }
+
+ /* Perform jumps to address, that is now in ITLB but is invalid */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ TEST_JUMP(RAM_START + RAM_SIZE + (i*ITLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE));
+
+ /* Check if there was ITLB miss */
+ ASSERT(itlb_miss_count == (i + 1));
+ ASSERT(itlb_miss_ea == (RAM_START + RAM_SIZE + (i*ITLB_SETS*PAGE_SIZE) + (set*PAGE_SIZE)));
+ }
+
+ /* Disable IMMU */
+ immu_disable ();
+
+ return 0;
+}
+
+/* Permission test
+ Set various permissions, perform r/w access
+ in user and supervisor mode and chack triggering
+ of page fault exceptions */
+int itlb_premission_test (int set)
+{
+ int i, j;
+ unsigned long ea, ta;
+
+ /* Disable IMMU */
+ immu_disable();
+
+ /* Invalidate all entries in ITLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ for (j = 0; j < ITLB_SETS; j++) {
+ mtspr (SPR_ITLBMR_BASE(i) + j, 0);
+ mtspr (SPR_ITLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_TEXT_SET_NB; i++) {
+ ea = FLASH_START + (i*PAGE_SIZE);
+ ta = FLASH_START + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(0) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(0) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Testing page */
+ ea = RAM_START + (RAM_SIZE/2) + (set*PAGE_SIZE);
+
+ /* Set match register */
+ mtspr (SPR_ITLBMR_BASE(ITLB_WAYS - 1) + set, ea | SPR_ITLBMR_V);
+
+ /* Reset page fault counter and EA */
+ ipage_fault_count = 0;
+ ipage_fault_ea = 0;
+
+ /* Copy the code */
+ copy_jump (ea);
+ copy_jump (ea + 8);
+
+ /* Enable IMMU */
+ immu_enable ();
+
+ /* Execute supervisor */
+ itlb_val = SPR_ITLBTR_CI | SPR_ITLBTR_SXE;
+ mtspr (SPR_ITLBTR_BASE(ITLB_WAYS - 1) + set, ea | (ITLB_PR_NOLIMIT & ~SPR_ITLBTR_SXE));
+
+ call (ea);
+ ASSERT(ipage_fault_count == 1);
+ call (ea + 8);
+ ASSERT(ipage_fault_count == 1);
+
+ /* Execute user */
+ itlb_val = SPR_ITLBTR_CI | SPR_ITLBTR_UXE;
+ mtspr (SPR_ITLBTR_BASE(ITLB_WAYS - 1) + set, ea | (ITLB_PR_NOLIMIT & ~SPR_ITLBTR_UXE));
+
+ /* Set user mode */
+ mtspr (SPR_SR, mfspr (SPR_SR) & ~SPR_SR_SM);
+
+ call (ea);
+ ASSERT(ipage_fault_count == 2);
+ call (ea + 8);
+ ASSERT(ipage_fault_count == 2);
+
+ /* Trigger sys call exception to enable supervisor mode again */
+ sys_call ();
+
+ /* Disable IMMU */
+ immu_disable ();
+
+ return 0;
+}
+
+/* Instruction cache inhibit bit test
+ Set and clear CI bit and check the pattern. */
+int itlb_ci_test(void)
+{
+ int i, j;
+ unsigned long ea, ta, ret;
+
+ /* Disable IMMU */
+ immu_disable();
+
+ /* Invalidate all entries in DTLB */
+ for (i = 0; i < ITLB_WAYS; i++) {
+ for (j = 0; j < ITLB_SETS; j++) {
+ mtspr (SPR_ITLBMR_BASE(i) + j, 0);
+ mtspr (SPR_ITLBTR_BASE(i) + j, 0);
+ }
+ }
+
+ /* Set one to one translation for the use of this program */
+ for (i = 0; i < TLB_TEXT_SET_NB; i++) {
+ ea = FLASH_START + (i*PAGE_SIZE);
+ ta = FLASH_START + (i*PAGE_SIZE);
+ mtspr (SPR_ITLBMR_BASE(0) + i, ea | SPR_ITLBMR_V);
+ mtspr (SPR_ITLBTR_BASE(0) + i, ta | ITLB_PR_NOLIMIT);
+ }
+
+ /* Testing page */
+ ea = RAM_START + (RAM_SIZE/2) + (TLB_TEXT_SET_NB*PAGE_SIZE);
+
+ ret = lo_itlb_ci_test (ea, TLB_TEXT_SET_NB);
+ ASSERT(ret == 0);
+
+ return 0;
+}
+
+int main (void)
+{
+ int i, j;
+
+ i = j = 0; /* Get rid of warnings */
+
+ /* Register bus error handler */
+ excpt_buserr = (unsigned long)bus_err_handler;
+
+ /* Register illegal insn handler */
+ excpt_illinsn = (unsigned long)ill_insn_handler;
+
+ /* Register illegal insn handler */
+ excpt_syscall = (unsigned long)sys_call_handler;
+
+#if 1
+ /* Translation test */
+ dtlb_translation_test ();
+
+ /* Virtual address match test */
+#ifndef RTL_SIM
+ for (j = 0; j < DTLB_WAYS; j++) {
+ for (i = TLB_DATA_SET_NB; i < (DTLB_SETS - 1); i++)
+ dtlb_match_test (j, i);
+ }
+#else
+ dtlb_match_test (0, DTLB_SETS - 2);
+#endif
+
+ /* Valid bit testing */
+#ifndef RTL_SIM
+ for (i = TLB_DATA_SET_NB; i < (DTLB_SETS - 1); i++)
+ dtlb_valid_bit_test (i);
+#else
+ dtlb_valid_bit_test (DTLB_SETS - 2);
+#endif
+
+ /* Permission test */
+#ifndef RTL_SIM
+ for (i = TLB_DATA_SET_NB; i < (DTLB_SETS - 1); i++)
+ dtlb_premission_test (i);
+#else
+ dtlb_premission_test (DTLB_SETS - 2);
+#endif
+
+ dtlb_ci_test();
+#endif
+
+#if 1
+ /* Translation test */
+ itlb_translation_test ();
+
+ /* Virtual address match test */
+#ifndef RTL_SIM
+ for (j = 0; j < DTLB_WAYS; j++) {
+ for (i = TLB_TEXT_SET_NB + 1; i < (DTLB_SETS - 1); i++)
+ itlb_match_test (j, i);
+ }
+#else
+ itlb_match_test (0, DTLB_SETS - 2);
+#endif
+
+ /* Valid bit testing */
+#ifndef RTL_SIM
+ for (i = TLB_TEXT_SET_NB; i < (ITLB_SETS); i++)
+ itlb_valid_bit_test (i);
+#else
+ itlb_valid_bit_test (ITLB_SETS-1);
+#endif
+
+ /* Permission test */
+#ifndef RTL_SIM
+ for (i = TLB_TEXT_SET_NB; i < (ITLB_SETS - 1); i++)
+ itlb_premission_test (i);
+#else
+ itlb_premission_test (ITLB_SETS - 2);
+#endif
+
+ itlb_ci_test();
+#endif
+
+ report (0xdeaddead);
+ exit (0);
+ return 0;
+}
+
Index: dhry.c
===================================================================
--- dhry.c (nonexistent)
+++ dhry.c (revision 1765)
@@ -0,0 +1,726 @@
+/*
+ ****************************************************************************
+ *
+ * "DHRYSTONE" Benchmark Program
+ * -----------------------------
+ *
+ * Version: C, Version 2.1
+ *
+ * File: dhry_1.c (part 2 of 3)
+ *
+ * Date: May 25, 1988
+ *
+ * Author: Reinhold P. Weicker
+ *
+ ****************************************************************************
+ */
+#include "support.h"
+#include "dhry.h"
+
+#define NUM_RUNS (20)
+#define DLX_FREQ 200 /* in MHz */
+#define PROC_6 0
+
+#ifndef strcpy
+char *strcpy (char *dst0, char *src0)
+{
+ char *s = dst0;
+
+ while ((*dst0++ = *src0++));
+
+ return s;
+}
+#endif
+
+#ifndef strcmp
+int strcmp (const char *s1, const char *s2)
+{
+ while (*s1 && *s2 && *s1 == *s2) {
+ s1++;
+ s2++;
+ }
+ return (*(unsigned char *) s1) - (*(unsigned char *) s2);
+}
+#endif
+
+#define DETECTNULL(X) (((X) - 0x01010101) & ~(X) & 0x80808080)
+#define UNALIGNED(X, Y) \
+ (((long)X & (sizeof (long) - 1)) | ((long)Y & (sizeof (long) - 1)))
+
+
+/* Global Variables: */
+
+Rec_Pointer Ptr_Glob,
+ Next_Ptr_Glob;
+int Int_Glob;
+Boolean Bool_Glob;
+char Ch_1_Glob,
+ Ch_2_Glob;
+int Arr_1_Glob [50];
+int Arr_2_Glob [50] [50];
+
+
+ /* forward declaration necessary since Enumeration may not simply be int */
+
+#ifndef REG
+ Boolean Reg = false;
+#define REG
+ /* REG becomes defined as empty */
+ /* i.e. no register variables */
+#else
+ Boolean Reg = true;
+#endif
+
+/* variables for time measurement: */
+
+#if DLX || OR1K
+#define Too_Small_Time DLX_FREQ
+#else
+#define Too_Small_Time 1
+#endif
+
+#define TIMER0 0
+#define TIMER1 1
+
+
+
+
+
+unsigned int Begin_Time,
+ End_Time,
+ User_Time,
+ Microseconds,
+ Dhrystones_Per_Second;
+
+/* end of variables for time measurement */
+
+
+void Proc_1(REG Rec_Pointer Ptr_Val_Par);
+void Proc_2(One_Fifty *Int_Par_Ref);
+void Proc_3(Rec_Pointer *Ptr_Ref_Par);
+void Proc_4();
+void Proc_5();
+void Proc_6(
+ Enumeration Enum_Val_Par,
+ Enumeration *Enum_Ref_Par);
+void Proc_7(
+ One_Fifty Int_1_Par_Val,
+ One_Fifty Int_2_Par_Val,
+ One_Fifty *Int_Par_Ref);
+void Proc_8(
+ Arr_1_Dim Arr_1_Par_Ref,
+ Arr_2_Dim Arr_2_Par_Ref,
+ int Int_1_Par_Val,
+ int Int_2_Par_Val);
+Enumeration Func_1(Capital_Letter Ch_1_Par_Val,
+ Capital_Letter Ch_2_Par_Val);
+Boolean Func_2(Str_30 Str_1_Par_Ref, Str_30 Str_2_Par_Ref);
+Boolean Func_3(Enumeration Enum_Par_Val);
+
+int main ()
+/*****/
+
+ /* main program, corresponds to procedures */
+ /* Main and Proc_0 in the Ada version */
+{
+ One_Fifty Int_1_Loc;
+ REG One_Fifty Int_2_Loc;
+ One_Fifty Int_3_Loc;
+ REG char Ch_Index;
+ Enumeration Enum_Loc;
+ Str_30 Str_1_Loc;
+ Str_30 Str_2_Loc;
+ REG int Run_Index;
+ REG int Number_Of_Runs;
+ Rec_Type x, y;
+
+ /* Initializations */
+
+ Next_Ptr_Glob = (Rec_Pointer) &x;
+ Ptr_Glob = (Rec_Pointer) &y;
+
+ Ptr_Glob->Ptr_Comp = Next_Ptr_Glob;
+ Ptr_Glob->Discr = Ident_1;
+ Ptr_Glob->variant.var_1.Enum_Comp = Ident_3;
+ Ptr_Glob->variant.var_1.Int_Comp = 40;
+ strcpy (Ptr_Glob->variant.var_1.Str_Comp,
+ "DHRYSTONE PROGRAM, SOME STRING");
+ strcpy (Str_1_Loc, "DHRYSTONE PROGRAM, 1'ST STRING");
+
+ Arr_2_Glob [8][7] = 10;
+ /* Was missing in published program. Without this statement, */
+ /* Arr_2_Glob [8][7] would have an undefined value. */
+ /* Warning: With 16-Bit processors and Number_Of_Runs > 32000, */
+ /* overflow may occur for this array element. */
+
+/* Initalize Data and Instruction Cache */
+
+
+/* printf ("\n");
+ printf ("Dhrystone Benchmark, Version 2.1 (Language: C)\n");
+ printf ("\n");
+ if (Reg)
+ {
+ printf ("Program compiled with 'register' attribute\n");
+ printf ("\n");
+ }
+ else
+ {
+ printf ("Program compiled without 'register' attribute\n");
+ printf ("\n");
+ }
+ printf ("Please give the number of runs through the benchmark: ");
+ */
+ {
+ int n;
+ /* scanf ("%d", &n);
+ */
+ n = NUM_RUNS;
+ Number_Of_Runs = n;
+ }
+ printf ("\n");
+
+ printf ("Execution starts, %d runs through Dhrystone\n", Number_Of_Runs);
+
+
+ /***************/
+ /* Start timer */
+ /***************/
+
+/* printf("%d", my_test2(Number_Of_Runs));*/
+ start_timer(TIMER0);
+ Begin_Time = read_timer(TIMER0);
+
+ for (Run_Index = 1; Run_Index <= Number_Of_Runs; ++Run_Index)
+ {
+
+ report(1);
+ report(Run_Index);
+ Proc_5();
+ report(2);
+ Proc_4();
+ report(3);
+ /* Ch_1_Glob == 'A', Ch_2_Glob == 'B', Bool_Glob == true */
+ Int_1_Loc = 2;
+ Int_2_Loc = 3;
+ strcpy (Str_2_Loc, "DHRYSTONE PROGRAM, 2'ND STRING");
+ Enum_Loc = Ident_2;
+ report(0x31);
+ report((unsigned long)Str_1_Loc);
+ report((unsigned long)Str_2_Loc);
+
+ Bool_Glob = ! Func_2 (Str_1_Loc, Str_2_Loc);
+ /* Bool_Glob == 1 */
+ report(4);
+ while (Int_1_Loc < Int_2_Loc) /* loop body executed once */
+ {
+ Int_3_Loc = 5 * Int_1_Loc - Int_2_Loc;
+ /* Int_3_Loc == 7 */
+ Proc_7 (Int_1_Loc, Int_2_Loc, &Int_3_Loc);
+ /* Int_3_Loc == 7 */
+ Int_1_Loc += 1;
+ } /* while */
+ report(5);
+ /* Int_1_Loc == 3, Int_2_Loc == 3, Int_3_Loc == 7 */
+#if DBG
+ printf("a) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("a) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("a) Int_3_Loc: %x\n\n", Int_3_Loc);
+#endif
+ Proc_8 (Arr_1_Glob, Arr_2_Glob, Int_1_Loc, Int_3_Loc);
+ /* Int_Glob == 5 */
+#if DBG
+ printf("b) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("b) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("b) Int_3_Loc: %x\n\n", Int_3_Loc);
+#endif
+ report(6);
+
+ Proc_1 (Ptr_Glob);
+#if DBG
+ printf("c) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("c) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("c) Int_3_Loc: %x\n\n", Int_3_Loc);
+#endif
+ report(7);
+
+ for (Ch_Index = 'A'; Ch_Index <= Ch_2_Glob; ++Ch_Index)
+ /* loop body executed twice */
+ {
+ if (Enum_Loc == Func_1 (Ch_Index, 'C'))
+ /* then, not executed */
+ {
+ Proc_6 (Ident_1, &Enum_Loc);
+ strcpy (Str_2_Loc, "DHRYSTONE PROGRAM, 3'RD STRING");
+ Int_2_Loc = Run_Index;
+ Int_Glob = Run_Index;
+#if DBG
+ printf("d) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("d) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("d) Int_3_Loc: %x\n\n", Int_3_Loc);
+#endif
+ }
+ }
+ report(8);
+
+ /* Int_1_Loc == 3, Int_2_Loc == 3, Int_3_Loc == 7 */
+#if DBG
+ printf("e) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("e) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("e) Int_3_Loc: %x\n", Int_3_Loc);
+ printf("e) Ch_1_Glob: %c\n\n", Ch_1_Glob);
+#endif
+ Int_2_Loc = Int_2_Loc * Int_1_Loc;
+ Int_1_Loc = Int_2_Loc / Int_3_Loc;
+ Int_2_Loc = 7 * (Int_2_Loc - Int_3_Loc) - Int_1_Loc;
+ /* Int_1_Loc == 1, Int_2_Loc == 13, Int_3_Loc == 7 */
+ Proc_2 (&Int_1_Loc);
+ report(9);
+
+ /* Int_1_Loc == 5 */
+#if DBG
+ printf("f) Int_1_Loc: %x\n", Int_1_Loc);
+ printf("f) Int_2_Loc: %x\n", Int_2_Loc);
+ printf("f) Int_3_Loc: %x\n\n", Int_3_Loc);
+#endif
+
+ } /* loop "for Run_Index" */
+
+ /**************/
+ /* Stop timer */
+ /**************/
+
+ End_Time = read_timer(TIMER0);
+
+/* printf ("Execution ends\n");
+ printf ("\n");
+ printf ("Final values of the variables used in the benchmark:\n");
+ printf ("\n");
+ printf ("Int_Glob: %d\n", Int_Glob);
+ printf (" should be: %d\n", 5);
+ printf ("Bool_Glob: %d\n", Bool_Glob);
+ printf (" should be: %d\n", 1);
+ printf ("Ch_1_Glob: %c\n", Ch_1_Glob);
+ printf (" should be: %c\n", 'A');
+ printf ("Ch_2_Glob: %c\n", Ch_2_Glob);
+ printf (" should be: %c\n", 'B');
+ printf ("Arr_1_Glob[8]: %d\n", Arr_1_Glob[8]);
+ printf (" should be: %d\n", 7);
+ printf ("Arr_2_Glob[8][7]: %d\n", Arr_2_Glob[8][7]);
+ printf (" should be: Number_Of_Runs + 10\n");
+ printf ("Ptr_Glob->\n");
+ printf (" Ptr_Comp: %d\n", (int) Ptr_Glob->Ptr_Comp);
+ printf (" should be: (implementation-dependent)\n");
+ printf (" Discr: %d\n", Ptr_Glob->Discr);
+ printf (" should be: %d\n", 0);
+ printf (" Enum_Comp: %d\n", Ptr_Glob->variant.var_1.Enum_Comp);
+ printf (" should be: %d\n", 2);
+ printf (" Int_Comp: %d\n", Ptr_Glob->variant.var_1.Int_Comp);
+ printf (" should be: %d\n", 17);
+ printf (" Str_Comp: %s\n", Ptr_Glob->variant.var_1.Str_Comp);
+ printf (" should be: DHRYSTONE PROGRAM, SOME STRING\n");
+ printf ("Next_Ptr_Glob->\n");
+ printf (" Ptr_Comp: %d\n", (int) Next_Ptr_Glob->Ptr_Comp);
+ printf (" should be: (implementation-dependent), same as above\n");
+ printf (" Discr: %d\n", Next_Ptr_Glob->Discr);
+ printf (" should be: %d\n", 0);
+ printf (" Enum_Comp: %d\n", Next_Ptr_Glob->variant.var_1.Enum_Comp);
+ printf (" should be: %d\n", 1);
+ printf (" Int_Comp: %d\n", Next_Ptr_Glob->variant.var_1.Int_Comp);
+ printf (" should be: %d\n", 18);
+ printf (" Str_Comp: %s\n",
+ Next_Ptr_Glob->variant.var_1.Str_Comp);
+ printf (" should be: DHRYSTONE PROGRAM, SOME STRING\n");
+ printf ("Int_1_Loc: %d\n", Int_1_Loc);
+ printf (" should be: %d\n", 5);
+ printf ("Int_2_Loc: %d\n", Int_2_Loc);
+ printf (" should be: %d\n", 13);
+ printf ("Int_3_Loc: %d\n", Int_3_Loc);
+ printf (" should be: %d\n", 7);
+ printf ("Enum_Loc: %d\n", Enum_Loc);
+ printf (" should be: %d\n", 1);
+ printf ("Str_1_Loc: %s\n", Str_1_Loc);
+ printf (" should be: DHRYSTONE PROGRAM, 1'ST STRING\n");
+ printf ("Str_2_Loc: %s\n", Str_2_Loc);
+ printf (" should be: DHRYSTONE PROGRAM, 2'ND STRING\n");
+
+*/
+
+
+ User_Time = End_Time - Begin_Time;
+ /* microseconds */
+
+ printf("Begin Time = %d\n",Begin_Time);
+ printf("End Time = %d\n",End_Time);
+
+
+ if (User_Time < Too_Small_Time)
+ {
+ printf ("Measured time too small to obtain meaningful results\n");
+ printf ("Please increase number of runs\n");
+ printf ("\n");
+ }
+ else
+ {
+#if DLX || OR1K
+ User_Time /= DLX_FREQ;
+#if DLX
+ printf("DLX ");
+#else
+#if OR1K
+ printf("OR1K ");
+#else
+ printf("Unknown CPU ");
+#endif
+#endif
+ printf("at %u MHz ", DLX_FREQ);
+ if (PROC_6)
+ printf("(+PROC_6)");
+ printf("\n");
+#endif
+ Microseconds = User_Time / Number_Of_Runs;
+ Dhrystones_Per_Second = Number_Of_Runs * 1000 / User_Time;
+ printf ("Microseconds for one run through Dhrystone: ");
+ printf ("%d us / %d runs\n", User_Time,Number_Of_Runs);
+ printf ("Dhrystones per Second: ");
+ printf ("%d \n", Dhrystones_Per_Second);
+ }
+ report (0xdeaddead);
+ return 0;
+}
+
+
+void Proc_1(Ptr_Val_Par)
+/******************/
+
+ REG Rec_Pointer Ptr_Val_Par;
+ /* executed once */
+{
+ REG Rec_Pointer Next_Record = Ptr_Val_Par->Ptr_Comp;
+ /* == Ptr_Glob_Next */
+ /* Local variable, initialized with Ptr_Val_Par->Ptr_Comp, */
+ /* corresponds to "rename" in Ada, "with" in Pascal */
+
+ report(0x20010);
+
+ structassign(*Ptr_Val_Par->Ptr_Comp, *Ptr_Glob);
+ Ptr_Val_Par->variant.var_1.Int_Comp = 5;
+ Next_Record->variant.var_1.Int_Comp
+ = Ptr_Val_Par->variant.var_1.Int_Comp;
+ Next_Record->Ptr_Comp = Ptr_Val_Par->Ptr_Comp;
+ Proc_3(&Next_Record->Ptr_Comp);
+ report(0x20011);
+ /*
+ * Ptr_Val_Par->Ptr_Comp->Ptr_Comp == Ptr_Glob->Ptr_Comp
+ */
+ if (Next_Record->Discr == Ident_1)
+ /* then, executed */
+ {
+ Next_Record->variant.var_1.Int_Comp = 6;
+ Proc_6(Ptr_Val_Par->variant.var_1.Enum_Comp,
+ &Next_Record->variant.var_1.Enum_Comp);
+ report(0x20012);
+ Next_Record->Ptr_Comp = Ptr_Glob->Ptr_Comp;
+ Proc_7(Next_Record->variant.var_1.Int_Comp, 10,
+ &Next_Record->variant.var_1.Int_Comp);
+ } else /* not executed */
+ structassign(*Ptr_Val_Par, *Ptr_Val_Par->Ptr_Comp);
+ report(0x20013);
+
+} /* Proc_1 */
+
+
+void
+ Proc_2(Int_Par_Ref)
+/******************/
+ /* executed once */
+ /* *Int_Par_Ref == 1, becomes 4 */
+
+ One_Fifty *Int_Par_Ref;
+{
+ One_Fifty Int_Loc;
+ Enumeration Enum_Loc = 0;
+
+ report(0x20020);
+
+ Int_Loc = *Int_Par_Ref + 10;
+ do /* executed once */
+ if (Ch_1_Glob == 'A')
+ /* then, executed */
+ {
+ Int_Loc -= 1;
+ *Int_Par_Ref = Int_Loc - Int_Glob;
+ Enum_Loc = Ident_1;
+ } /* if */
+ while (Enum_Loc != Ident_1);/* true */
+} /* Proc_2 */
+
+
+void
+ Proc_3(Ptr_Ref_Par)
+/******************/
+ /* executed once */
+ /* Ptr_Ref_Par becomes Ptr_Glob */
+
+ Rec_Pointer *Ptr_Ref_Par;
+
+{
+ report(0x20030);
+
+ if (Ptr_Glob != Null)
+ /* then, executed */
+ *Ptr_Ref_Par = Ptr_Glob->Ptr_Comp;
+ Proc_7(10, Int_Glob, &Ptr_Glob->variant.var_1.Int_Comp);
+} /* Proc_3 */
+
+
+void
+ Proc_4()
+{ /* without parameters */
+ /*******/
+ /* executed once */
+ Boolean Bool_Loc;
+
+ report(0x20040);
+
+ Bool_Loc = Ch_1_Glob == 'A';
+ Bool_Glob = Bool_Loc | Bool_Glob;
+ Ch_2_Glob = 'B';
+} /* Proc_4 */
+
+
+void
+ Proc_5()
+{ /* without parameters */
+ /*******/
+ /* executed once */
+ report(0x20050);
+
+ Ch_1_Glob = 'A';
+ Bool_Glob = false;
+} /* Proc_5 */
+
+/* @(#)dhry_2.c 1.2 92/05/28 14:44:54, AMD */
+/*
+ ****************************************************************************
+ *
+ * "DHRYSTONE" Benchmark Program
+ * -----------------------------
+ *
+ * Version: C, Version 2.1
+ *
+ * File: dhry_2.c (part 3 of 3)
+ *
+ * Date: May 25, 1988
+ *
+ * Author: Reinhold P. Weicker
+ *
+ ****************************************************************************
+ */
+
+#ifndef REG
+#define REG
+ /* REG becomes defined as empty */
+ /* i.e. no register variables */
+#ifdef _AM29K
+#undef REG
+#define REG register /* Define REG; saves room on 127-char MS-DOS cmd line */
+#endif
+#endif
+
+
+void
+ Proc_6(Enum_Val_Par, Enum_Ref_Par)
+/*********************************/
+ /* executed once */
+ /* Enum_Val_Par == Ident_3, Enum_Ref_Par becomes Ident_2 */
+
+ Enumeration Enum_Val_Par;
+ Enumeration *Enum_Ref_Par;
+{
+#if PROC_6
+ report(0x20060);
+
+ *Enum_Ref_Par = Enum_Val_Par;
+ if (!Func_3(Enum_Val_Par))
+ /* then, not executed */
+ *Enum_Ref_Par = Ident_4;
+ switch (Enum_Val_Par) {
+ case Ident_1:
+ *Enum_Ref_Par = Ident_1;
+ break;
+ case Ident_2:
+ if (Int_Glob > 100)
+ /* then */
+ *Enum_Ref_Par = Ident_1;
+ else
+ *Enum_Ref_Par = Ident_4;
+ break;
+ case Ident_3: /* executed */
+ *Enum_Ref_Par = Ident_2;
+ break;
+ case Ident_4:
+ break;
+ case Ident_5:
+ *Enum_Ref_Par = Ident_3;
+ break;
+ } /* switch */
+#endif
+ return;
+} /* Proc_6 */
+
+
+void
+ Proc_7(Int_1_Par_Val, Int_2_Par_Val, Int_Par_Ref)
+/**********************************************/
+ /* executed three times */
+ /* first call: Int_1_Par_Val == 2, Int_2_Par_Val == 3, */
+ /* Int_Par_Ref becomes 7 */
+ /* second call: Int_1_Par_Val == 10, Int_2_Par_Val == 5, */
+ /* Int_Par_Ref becomes 17 */
+ /* third call: Int_1_Par_Val == 6, Int_2_Par_Val == 10, */
+ /* Int_Par_Ref becomes 18 */
+ One_Fifty Int_1_Par_Val;
+ One_Fifty Int_2_Par_Val;
+ One_Fifty *Int_Par_Ref;
+{
+ One_Fifty Int_Loc;
+
+ report(0x20070);
+
+ Int_Loc = Int_1_Par_Val + 2;
+ *Int_Par_Ref = Int_2_Par_Val + Int_Loc;
+} /* Proc_7 */
+
+
+void
+ Proc_8(Arr_1_Par_Ref, Arr_2_Par_Ref, Int_1_Par_Val, Int_2_Par_Val)
+/*********************************************************************/
+ /* executed once */
+ /* Int_Par_Val_1 == 3 */
+ /* Int_Par_Val_2 == 7 */
+ Arr_1_Dim Arr_1_Par_Ref;
+ Arr_2_Dim Arr_2_Par_Ref;
+ int Int_1_Par_Val;
+ int Int_2_Par_Val;
+{
+ REG One_Fifty Int_Index;
+ REG One_Fifty Int_Loc;
+
+#if DBG
+ printf("X) Int_1_Par_Val: %x\n", Int_1_Par_Val);
+ printf("X) Int_2_Par_Val: %x\n", Int_2_Par_Val);
+#endif
+
+ report(0x20080);
+
+ Int_Loc = Int_1_Par_Val + 5;
+ Arr_1_Par_Ref[Int_Loc] = Int_2_Par_Val;
+ Arr_1_Par_Ref[Int_Loc + 1] = Arr_1_Par_Ref[Int_Loc];
+ Arr_1_Par_Ref[Int_Loc + 30] = Int_Loc;
+ for (Int_Index = Int_Loc; Int_Index <= Int_Loc + 1; ++Int_Index)
+ Arr_2_Par_Ref[Int_Loc][Int_Index] = Int_Loc;
+ Arr_2_Par_Ref[Int_Loc][Int_Loc - 1] += 1;
+ Arr_2_Par_Ref[Int_Loc + 20][Int_Loc] = Arr_1_Par_Ref[Int_Loc];
+ Int_Glob = 5;
+
+#if DBG
+ printf("Y) Int_1_Par_Val: %x\n", Int_1_Par_Val);
+ printf("Y) Int_2_Par_Val: %x\n", Int_2_Par_Val);
+#endif
+
+} /* Proc_8 */
+
+
+Enumeration
+ Func_1(Ch_1_Par_Val, Ch_2_Par_Val)
+/*************************************************/
+ /* executed three times */
+ /* first call: Ch_1_Par_Val == 'H', Ch_2_Par_Val == 'R' */
+ /* second call: Ch_1_Par_Val == 'A', Ch_2_Par_Val == 'C' */
+ /* third call: Ch_1_Par_Val == 'B', Ch_2_Par_Val == 'C' */
+
+ Capital_Letter Ch_1_Par_Val;
+ Capital_Letter Ch_2_Par_Val;
+{
+ Capital_Letter Ch_1_Loc;
+ Capital_Letter Ch_2_Loc;
+
+ report(0x30010);
+
+ Ch_1_Loc = Ch_1_Par_Val;
+ Ch_2_Loc = Ch_1_Loc;
+ if (Ch_2_Loc != Ch_2_Par_Val)
+ /* then, executed */
+ return (Ident_1);
+ else { /* not executed */
+ Ch_1_Glob = Ch_1_Loc;
+ return (Ident_2);
+ }
+} /* Func_1 */
+
+
+Boolean
+ Func_2(Str_1_Par_Ref, Str_2_Par_Ref)
+/*************************************************/
+ /* executed once */
+ /* Str_1_Par_Ref == "DHRYSTONE PROGRAM, 1'ST STRING" */
+ /* Str_2_Par_Ref == "DHRYSTONE PROGRAM, 2'ND STRING" */
+
+ Str_30 Str_1_Par_Ref;
+ Str_30 Str_2_Par_Ref;
+{
+ REG One_Thirty Int_Loc;
+ Capital_Letter Ch_Loc = 0;
+
+ report(0x30020);
+
+ Int_Loc = 2;
+ while (Int_Loc <= 2) /* loop body executed once */
+ if (Func_1(Str_1_Par_Ref[Int_Loc],
+ Str_2_Par_Ref[Int_Loc + 1]) == Ident_1)
+ /* then, executed */
+ {
+ Ch_Loc = 'A';
+ Int_Loc += 1;
+ } /* if, while */
+ report(0x30021);
+
+ if (Ch_Loc >= 'W' && Ch_Loc < 'Z')
+ /* then, not executed */
+ Int_Loc = 7;
+ report(0x30022);
+ if (Ch_Loc == 'R')
+ /* then, not executed */
+ return (true);
+ else { /* executed */
+ report(0x30023);
+ if (strcmp(Str_1_Par_Ref, Str_2_Par_Ref) > 0)
+ /* then, not executed */
+ {
+ Int_Loc += 7;
+ Int_Glob = Int_Loc;
+ return (true);
+ } else /* executed */
+ return (false);
+ } /* if Ch_Loc */
+} /* Func_2 */
+
+
+Boolean
+ Func_3(Enum_Par_Val)
+/***************************/
+ /* executed once */
+ /* Enum_Par_Val == Ident_3 */
+ Enumeration Enum_Par_Val;
+{
+ Enumeration Enum_Loc;
+
+ Enum_Loc = Enum_Par_Val;
+ report(0x30030);
+ if (Enum_Loc == Ident_3)
+ /* then, executed */
+ return (true);
+ else /* not executed */
+ return (false);
+} /* Func_3 */
dhry.c
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: mc_common.c
===================================================================
--- mc_common.c (nonexistent)
+++ mc_common.c (revision 1765)
@@ -0,0 +1,431 @@
+/* mc_common.c -- Memory Controller testbenck common routines
+ Copyright (C) 2001 by Ivan Guzvinec, ivang@opencores.org
+
+ This file is part of OpenRISC 1000 Architectural Simulator.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include "support.h"
+#include "mc_common.h"
+
+static int r_Xn;
+static int r_mod;
+
+void randomin(unsigned long seed)
+{
+ r_Xn = seed;
+ r_mod = 33554431; /* 2^25 - 1*/
+}
+
+unsigned long random(unsigned long max)
+{
+ r_Xn = ((r_Xn * (r_Xn + 1))%r_mod);
+ if (r_Xn == 0) r_Xn = 42+1;
+ return r_Xn%max;
+}
+
+void mc_clear_row(unsigned long nFrom, unsigned long nTo)
+{
+ MEMLOC32 mem32 = 0;
+ unsigned long i;
+
+ for(i=nFrom; i