URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/tags/nog_patch_59/or1ksim/support
- from Rev 1443 to Rev 1765
- ↔ Reverse comparison
Rev 1443 → Rev 1765
/dumpverilog.c
0,0 → 1,126
/* dumpverilog.c -- Dumps memory region as Verilog representation |
or as hex code |
Copyright (C) 2000 Damjan Lampret, lampret@opencores.org |
|
This file is part of OpenRISC 1000 Architectural Simulator. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
|
/* Verilog dump can be used for stimulating OpenRISC Verilog RTL models. */ |
|
#include <stdio.h> |
#include <ctype.h> |
#include <string.h> |
|
#include "config.h" |
|
#ifdef HAVE_INTTYPES_H |
#include <inttypes.h> |
#endif |
|
#include "port.h" |
#include "arch.h" |
#include "sim-config.h" |
#include "parse.h" |
#include "abstract.h" |
#include "opcode/or32.h" |
#include "spr_defs.h" |
#include "labels.h" |
#include "execute.h" |
#include "sprs.h" |
#include "stats.h" |
#include "except.h" |
#include "dumpverilog.h" |
|
extern char rcsrev[]; |
extern char *disassembled; |
|
void dumpverilog(char *verilog_modname, unsigned int from, unsigned int to) |
{ |
unsigned int i, done = 0; |
struct label_entry *tmp; |
char dis[DISWIDTH + 100]; |
PRINTF("// This file was generated by or1ksim %s\n", rcsrev); |
PRINTF(OR1K_MEM_VERILOG_HEADER(verilog_modname, from/DWQ, to/DWQ, (DISWIDTH*8))); |
|
for(i = from; i < to; i++) |
{ |
unsigned int _insn = evalsim_mem32 (i); |
int index = insn_decode(_insn); |
if (index >= 0) |
{ |
if (verify_memoryarea(i) && (tmp = get_label(i))) |
if (tmp) |
PRINTF("\n//\t%s%s", tmp->name, LABELEND_CHAR); |
|
PRINTF("\n\tmem['h%x] = %d'h%.8"PRIx32";", i/DWQ, DW, evalsim_mem32(i)); |
|
disassemble_insn (_insn); |
strcpy (dis, disassembled); |
|
if (strlen(dis) < DISWIDTH) |
memset(dis + strlen(dis), ' ', DISWIDTH); |
dis[DISWIDTH] = '\0'; |
PRINTF("\n\tdis['h%x] = {\"%s\"};", i/DWQ, dis); |
dis[0] = '\0'; |
i += insn_len(index) - 1; |
} else { |
if (i % 64 == 0) |
PRINTF("\n"); |
|
PRINTF("\n\tmem['h%x] = 'h%.2x;", i/DWQ, evalsim_mem8(i)); |
} |
done = 1; |
} |
|
if (done) |
{ |
PRINTF(OR1K_MEM_VERILOG_FOOTER); |
return; |
} |
|
/* this needs to be fixed */ |
|
for(i = from; i < to; i++) |
{ |
if (i % 8 == 0) |
PRINTF("\n%.8x: ", i); |
|
/* don't print ascii chars below 0x20. */ |
if (evalsim_mem32(i) < 0x20) |
PRINTF("0x%.2x ", (unsigned char)evalsim_mem32(i)); |
else |
PRINTF("0x%.2x'%c' ", (unsigned char)evalsim_mem32(i), (unsigned char)evalsim_mem32(i)); |
} |
PRINTF(OR1K_MEM_VERILOG_FOOTER); |
} |
|
void dumphex(unsigned int from, unsigned int to) |
{ |
unsigned int i; |
|
for(i = from; i < to; i++) { |
unsigned int _insn = evalsim_mem32 (i); |
int index = insn_decode(_insn); |
if (index >= 0) |
{ |
PRINTF("%.8"PRIx32"\n", evalsim_mem32(i)); |
|
i += insn_len(index) - 1; |
} |
else |
PRINTF("%.2x\n", evalsim_mem8(i)); |
} |
} |
/dbchs.h
0,0 → 1,27
/* dbchs.h -- Debug channel declarations |
|
|
This file is part of OpenRISC 1000 Architectural Simulator. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
|
|
/* Declatrations of all debug channels */ |
DECLARE_DEBUG_CHANNEL(sched) |
DECLARE_DEBUG_CHANNEL(immu) |
DECLARE_DEBUG_CHANNEL(dmmu) |
DECLARE_DEBUG_CHANNEL(pic) |
DECLARE_DEBUG_CHANNEL(tick) |
DECLARE_DEBUG_CHANNEL(uart) |
/simprintf.c
0,0 → 1,162
/* libc.c -- dummy C library simulation |
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org |
|
This file is part of OpenRISC 1000 Architectural Simulator. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
|
/* Debugger LIBC functions. Working, but VERY, VERY ugly written. |
I wrote following code when basic simulator started to work and I was |
desperate to use some PRINTFs in my debugged code. And it was |
also used to get some output from Dhrystone MIPS benchmark. */ |
|
#include <stdio.h> |
#include <string.h> |
#include <errno.h> |
#include <stdarg.h> |
#include <stdlib.h> |
|
#include "config.h" |
|
#ifdef HAVE_INTTYPES_H |
#include <inttypes.h> |
#endif |
|
#include "port.h" |
#include "arch.h" |
#include "abstract.h" |
#include "sim-config.h" |
#include "debug.h" |
|
/* Length of PRINTF format string */ |
#define FMTLEN 2000 |
|
char fmtstr[FMTLEN]; |
|
char *simgetstr(oraddr_t stackaddr, unsigned long regparam) |
{ |
oraddr_t fmtaddr; |
int i; |
int breakpoint = 0; |
|
fmtaddr = regparam; |
|
i = 0; |
while (eval_direct8(fmtaddr,&breakpoint,1,0) != '\0') { |
fmtstr[i++] = eval_direct8(fmtaddr,&breakpoint,1,0); |
fmtaddr++; |
if (i == FMTLEN - 1) |
break; |
} |
fmtstr[i] = '\0'; |
|
return fmtstr; |
} |
|
void simprintf(oraddr_t stackaddr, unsigned long regparam) |
{ |
FILE *f; |
int breakpoint = 0; |
|
simgetstr(stackaddr, regparam); |
|
debug(6, "simprintf: stackaddr: 0x%"PRIxADDR"\n", stackaddr); |
if ((f = fopen(config.sim.fstdout, "a+"))) { |
uint32_t arg; |
oraddr_t argaddr; |
char *fmtstrend; |
char *fmtstrpart = fmtstr; |
int tee_exe_log; |
|
#if STACK_ARGS |
argaddr = stackaddr; |
#else |
argaddr = 3; |
#endif |
tee_exe_log = (config.sim.exe_log && (config.sim.exe_log_type == EXE_LOG_SOFTWARE || config.sim.exe_log_type == EXE_LOG_SIMPLE) |
&& config.sim.exe_log_start <= runtime.cpu.instructions && (config.sim.exe_log_end <= 0 || runtime.cpu.instructions <= config.sim.exe_log_end)); |
|
if (tee_exe_log) fprintf (runtime.sim.fexe_log, "SIMPRINTF: "); |
debug(6, "simprintf: %s\n", fmtstrpart); |
while(strlen(fmtstrpart)) { |
debug(6, "simprintf(): 1"); |
if ((fmtstrend = strstr(fmtstrpart + 1, "%"))) |
*fmtstrend = '\0'; |
debug(6," 2"); |
if (strstr(fmtstrpart, "%")) { |
char *tmp; |
int string = 0; |
debug(6, " 3"); |
#if STACK_ARGS |
arg = eval_direct32(argaddr,&breakpoint,1,0); |
argaddr += 4; |
#else |
{ |
unsigned char regstr[5]; |
|
sprintf(regstr, "r%"PRIxADDR, ++argaddr); |
arg = evalsim_reg(atoi(regstr)); |
} |
#endif |
debug(6, " 4: fmtstrpart=%p fmtstrpart=%s arg=0x%08"PRIx32"\n", |
fmtstrpart, fmtstrpart, arg); |
tmp = fmtstrpart; |
if (*tmp == '%') { |
tmp++; |
while (*tmp == '-' || *tmp >= '0' && *tmp <= '9') tmp++; |
if (*tmp == 's') string = 1; |
} |
if (string) { |
int len = 0; |
char *str; |
for(; eval_direct8(arg++,&breakpoint,1,0); len++); |
len++; /* for null char */ |
arg -= len; |
str = (char *)malloc(len); |
len = 0; |
for(; eval_direct8(arg,&breakpoint,1,0); len++) |
*(str+len) = eval_direct8(arg++,&breakpoint,1,0); |
*(str+len) = eval_direct8(arg,&breakpoint,1,0); /* null ch */ |
debug(6, "4a: len=%d str=%s\n", len, str); |
debug(6, "4b:"); |
fprintf(f, fmtstrpart, str); |
if (tee_exe_log) fprintf(runtime.sim.fexe_log, fmtstrpart, str); |
free(str); |
} else { |
fprintf(f, fmtstrpart, arg); |
if (tee_exe_log) fprintf(runtime.sim.fexe_log, fmtstrpart, arg); |
} |
} else { |
debug(6, " 5"); |
fprintf(f, fmtstrpart); |
if (tee_exe_log) fprintf(runtime.sim.fexe_log, fmtstrpart); |
debug(6, fmtstrpart); |
} |
if (!fmtstrend) |
break; |
debug(6, " 6"); |
fmtstrpart = fmtstrend; |
*fmtstrpart = '%'; |
debug(6, " 7"); |
} |
|
debug(6," 8\n"); |
if (fclose(f)) |
perror(strerror(errno)); |
} |
else |
perror(strerror(errno)); |
|
} |
/sched.c
0,0 → 1,93
/* sched.c -- Abstract entities, handling job scheduling |
Copyright (C) 2001 Marko Mlinar, markom@opencores.org |
|
This file is part of OpenRISC 1000 Architectural Simulator. |
|
This program is free software; you can redistribute it and/or modify |
it under the terms of the GNU General Public License as published by |
the Free Software Foundation; either version 2 of the License, or |
(at your option) any later version. |
|
This program is distributed in the hope that it will be useful, |
but WITHOUT ANY WARRANTY; without even the implied warranty of |
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
GNU General Public License for more details. |
|
You should have received a copy of the GNU General Public License |
along with this program; if not, write to the Free Software |
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ |
|
/* Abstract memory and routines that go with this. I need to |
add all sorts of other abstract entities. Currently we have |
only memory. */ |
|
#include <stdlib.h> |
#include <stdio.h> |
#include <ctype.h> |
#include <string.h> |
#include <limits.h> |
|
#include "config.h" |
|
#ifdef HAVE_INTTYPES_H |
#include <inttypes.h> |
#endif |
|
#include "port.h" |
#include "arch.h" |
#include "sim-config.h" |
#include "config.h" |
#include "sched.h" |
|
struct scheduler_struct scheduler; |
|
/* Dummy function, representing a guard, which protects heap from |
emptying */ |
void sched_guard (void *dat) |
{ |
if(scheduler.job_queue) |
SCHED_ADD(sched_guard, dat, SCHED_TIME_MAX); |
else { |
scheduler.job_queue = scheduler.free_job_queue; |
scheduler.free_job_queue = scheduler.free_job_queue->next; |
scheduler.job_queue->next = NULL; |
scheduler.job_queue->func = sched_guard; |
scheduler.job_queue->time = SCHED_TIME_MAX; |
#if DYNAMIC_EXECUTION |
set_sched_cycle(SCHED_TIME_MAX); |
#endif |
} |
} |
|
void sched_reset(void) |
{ |
struct sched_entry *cur, *next; |
|
for(cur = scheduler.job_queue; cur; cur = next) { |
next = cur->next; |
cur->next = scheduler.free_job_queue; |
scheduler.free_job_queue = cur; |
} |
scheduler.job_queue = NULL; |
sched_guard(NULL); |
} |
|
void sched_init(void) |
{ |
int i; |
struct sched_entry *new; |
|
scheduler.free_job_queue = NULL; |
|
for(i = 0; i < SCHED_HEAP_SIZE; i++) { |
if(!(new = malloc(sizeof(struct sched_entry)))) { |
fprintf(stderr, "Out-of-memory while allocateing scheduler queue\n"); |
exit(1); |
} |
new->next = scheduler.free_job_queue; |
scheduler.free_job_queue = new; |
} |
scheduler.job_queue = NULL; |
sched_guard(NULL); |
} |
#warning Scheduler should continue from previous cycles not current ones |
sched.c
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: sched.h
===================================================================
--- sched.h (nonexistent)
+++ sched.h (revision 1765)
@@ -0,0 +1,160 @@
+/* sched.h -- Abstract entities header file handling job scheduler
+ Copyright (C) 2001 Marko Mlinar, markom@opencores.org
+ Copyright (C) 2005 György `nog' Jeney, nog@sdf.lonestar.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#ifndef _SCHED_H_
+#define _SCHED_H_
+
+#include "debug.h"
+
+/* Scheduler debug level */
+#define SCHED_DEBUG 0
+
+#define SCHED_HEAP_SIZE 128
+#define SCHED_TIME_MAX INT32_MAX
+
+DECLARE_DEBUG_CHANNEL(sched);
+
+/* Structure for holding one job entry */
+struct sched_entry {
+ int32_t time; /* Clock cycles before job starts */
+ void *param; /* Parameter to pass to the function */
+ void (*func)(void *); /* Function to call when time reaches 0 */
+ struct sched_entry *next;
+};
+
+/* Heap of jobs */
+struct scheduler_struct {
+ struct sched_entry *free_job_queue;
+ struct sched_entry *job_queue;
+};
+
+void sched_init(void);
+void sched_reset(void);
+
+extern struct scheduler_struct scheduler;
+
+#if SCHED_DEBUG > 1
+#define SCHED_PRINT_JOBS() sched_print_jobs()
+static inline void sched_print_jobs(void)
+{
+ struct sched_entry *cur;
+ int i;
+
+ for (cur = scheduler.job_queue, i = 0; cur; cur = cur->next, i++)
+ TRACE_(sched)("\t%i: %p $%p @ %"PRIi32"\n", i, cur->func, cur->param,
+ cur->time);
+}
+#else
+#define SCHED_PRINT_JOBS()
+#endif
+
+/* Adds new job to the queue */
+static inline void sched_add(void (*job_func)(void *), void *job_param,
+ int32_t job_time, const char *func)
+{
+ struct sched_entry *cur, *prev, *new_job;
+ int32_t alltime;
+
+ if (SCHED_DEBUG > 1)
+ TRACE_(sched)("%s@%lli:SCHED_ADD(time %"PRIi32")\n", func,
+ runtime.sim.cycles, job_time);
+ SCHED_PRINT_JOBS();
+
+ if (SCHED_DEBUG > 1) TRACE_(sched) ("--------\n");
+
+ cur = scheduler.job_queue;
+ prev = NULL;
+ alltime = cur->time;
+ while(cur && (alltime < job_time)) {
+ prev = cur;
+ cur = cur->next;
+ if(cur)
+ alltime += cur->time;
+ }
+
+ new_job = scheduler.free_job_queue;
+ scheduler.free_job_queue = new_job->next;
+ new_job->next = cur;
+
+ new_job->func = job_func;
+ new_job->param = job_param;
+
+ if(prev) {
+ new_job->time = job_time - (alltime - (cur ? cur->time : 0));
+ prev->next = new_job;
+ TRACE_(sched)("Scheduled job not going to head of queue, relative time: %"
+ PRIi32"\n", new_job->time);
+ } else {
+ scheduler.job_queue = new_job;
+ new_job->time = job_time;
+#if DYNAMIC_EXECUTION
+ /* If we are replaceing the first job in the queue, then update the
+ * recompiler's internal cycle counter */
+ set_sched_cycle(job_time);
+#endif
+ TRACE_(sched)("Setting to-go cycles to %"PRIi32" at %lli\n", job_time,
+ runtime.sim.cycles);
+ }
+
+ if(cur)
+ cur->time -= new_job->time;
+
+ SCHED_PRINT_JOBS();
+}
+
+#define SCHED_ADD(job_func, job_param, job_time) sched_add(job_func, job_param, job_time, __FUNCTION__)
+
+/* Returns a job with specified function and param, NULL if not found */
+static inline void sched_find_remove(void (*job_func)(void *), void *dat,
+ const char *func)
+{
+ struct sched_entry *cur;
+ struct sched_entry *prev = NULL;
+
+ TRACE_(sched)("%s@%lli:SCHED_REMOVE()\n", func, runtime.sim.cycles);
+
+ for (cur = scheduler.job_queue; cur; prev = cur, cur = cur->next) {
+ if ((cur->func == job_func) && (cur->param == dat)) {
+ if(cur->next)
+ cur->next->time += cur->time;
+
+ if(prev) {
+ prev->next = cur->next;
+ } else {
+ scheduler.job_queue = cur->next;
+#if DYNAMIC_EXECUTION
+ if(cur->next)
+ set_sched_cycle(cur->next->time);
+#endif
+ if(cur->next)
+ TRACE_(sched)("Setting to-go cycles to %"PRIi32" at %lli\n",
+ cur->next->time, runtime.sim.cycles);
+ }
+ cur->next = scheduler.free_job_queue;
+ scheduler.free_job_queue = cur;
+ break;
+ }
+ }
+}
+
+/* Deletes job with specified function and param */
+#define SCHED_FIND_REMOVE(f, p) sched_find_remove(f, p, __FUNCTION__)
+
+#endif /* _SCHED_H_ */
sched.h
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: debug.c
===================================================================
--- debug.c (nonexistent)
+++ debug.c (revision 1765)
@@ -0,0 +1,123 @@
+/* debug.c -- Debug channel support code
+ Copyright (C) 2005 György `nog' Jeney, nog@sdf.lonestar.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#include
+#include
+#include
+
+#define __ORSIM_NO_DEC_DBCH
+#include "debug.h"
+
+#define DECLARE_DEBUG_CHANNEL(dbch) char __orsim_dbch_##dbch[] = "\0"#dbch;
+#include "dbchs.h"
+#undef DECLARE_DEBUG_CHANNEL
+
+#define DECLARE_DEBUG_CHANNEL(dbch) __orsim_dbch_##dbch,
+static char *__orsim_dbchs[] = {
+#include "dbchs.h"
+NULL };
+#undef DECLARE_DEBUG_CHANNEL
+
+static const char *debug_classes[] = { "trace", "fixme", "warn", "err" };
+
+void orsim_dbg_log(enum __ORSIM_DEBUG_CLASS dbcl, const char *dbch,
+ const char *function, const char *format, ...)
+{
+ va_list ap;
+ static int last_lf = 1; /* There *has* to be a better way */
+
+ if(!(dbch[0] & (1 << dbcl)))
+ return;
+
+ if(last_lf)
+ fprintf(stderr, "%s:%s:%s: ", debug_classes[dbcl], dbch + 1, function);
+ last_lf = format[strlen(format) - 1] == '\n'; /* This is wrong... */
+ va_start(ap, format);
+ vfprintf(stderr, format, ap);
+ va_end(ap);
+}
+
+void orsim_dbcl_set(enum __ORSIM_DEBUG_CLASS dbcl, char *dbch, int on)
+{
+ if(on)
+ dbch[0] |= 1 << dbcl;
+ else
+ dbch[0] &= ~(1 << dbcl);
+}
+
+void orsim_dbcl_set_name(enum __ORSIM_DEBUG_CLASS dbcl, const char *dbch, int on)
+{
+ char **dbchs = __orsim_dbchs;
+
+ for(dbchs = __orsim_dbchs; *dbchs; dbchs++) {
+ if(!strcmp(*dbchs + 1, dbch)) {
+ orsim_dbcl_set(dbcl, *dbchs, on);
+ break;
+ }
+ }
+}
+
+void parse_dbchs(const char *str)
+{
+ enum __ORSIM_DEBUG_CLASS dbcl;
+ int i;
+ int disen;
+ int all;
+ const char *cend;
+
+ while(*str) {
+ cend = strpbrk(str, "+-");
+ if(cend == str) {
+ all = 1;
+ } else {
+ for(i = 0; i < 5; i++) {
+ if(!strncmp(str, debug_classes[i], cend - str)) {
+ dbcl = i;
+ break;
+ }
+ }
+ if(i > 4)
+ fprintf(stderr, "Unknown class specified\n");
+ all = 0;
+ }
+ disen = *cend == '+' ? 1 : 0;
+ str = cend + 1;
+ cend = strchr(str, ',');
+ if(!cend)
+ cend = str + strlen(str);
+ for(i = 0; __orsim_dbchs[i]; i++)
+ if(!strncmp(str, __orsim_dbchs[i] + 1, cend - str))
+ break;
+
+ if(!__orsim_dbchs[i])
+ fprintf(stderr, "Unknown channel specified\n");
+
+ if(all) {
+ orsim_dbcl_set(__ORSIM_DBCL_TRACE, __orsim_dbchs[i], disen);
+ orsim_dbcl_set(__ORSIM_DBCL_FIXME, __orsim_dbchs[i], disen);
+ orsim_dbcl_set(__ORSIM_DBCL_WARN, __orsim_dbchs[i], disen);
+ orsim_dbcl_set(__ORSIM_DBCL_ERR, __orsim_dbchs[i], disen);
+ } else
+ orsim_dbcl_set(dbcl, __orsim_dbchs[i], disen);
+ if(*cend)
+ str = cend + 1;
+ else
+ str = cend;
+ }
+}
Index: Makefile.am
===================================================================
--- Makefile.am (nonexistent)
+++ Makefile.am (revision 1765)
@@ -0,0 +1,22 @@
+# Makefile -- Makefile for cpu architecture independent simulation
+# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+noinst_LIBRARIES = libsupport.a
+libsupport_a_SOURCES = simprintf.c dumpverilog.c profile.c sched.c debug.c
Index: debug.h
===================================================================
--- debug.h (nonexistent)
+++ debug.h (revision 1765)
@@ -0,0 +1,70 @@
+/* debug.h -- Trace function declarations
+ Copyright 1999 Patrik Stridvall (for the wine project: www.winehq.com)
+ Copyright (C) 2005 György `nog' Jeney, nog@sdf.lonestar.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+(Most of it is ripped from the wine project's wine/include/wine/debug.h)
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#ifndef __DEBUG_H_INCLUDED
+#define __DEBUG_H_INCLUDED
+
+enum __ORSIM_DEBUG_CLASS {
+ __ORSIM_DBCL_TRACE,
+ __ORSIM_DBCL_FIXME,
+ __ORSIM_DBCL_WARN,
+ __ORSIM_DBCL_ERR,
+};
+
+void orsim_dbg_log(enum __ORSIM_DEBUG_CLASS dbcl, const char *dbch,
+ const char *function, const char *format, ...)
+ __attribute__((format(printf, 4, 5)));
+void orsim_dbcl_set_name(enum __ORSIM_DEBUG_CLASS dbcl, const char *dbch, int on);
+void parse_dbchs(const char *str);
+
+#ifndef __ORSIM_DBG_USE_FUNC
+#define __ORSIM_DBG_USE_FUNC __FUNCTION__
+#endif
+
+#define __ORSIM_DPRINTF(dbcl, dbch) \
+ do { const char * const __dbch = dbch; \
+ const enum __ORSIM_DEBUG_CLASS __dbcl = __ORSIM_DBCL_##dbcl; \
+ __ORSIM_DEBUG_LOG
+
+#define __ORSIM_DEBUG_LOG(args...) \
+ orsim_dbg_log(__dbcl, __dbch, __ORSIM_DBG_USE_FUNC, args); } while(0)
+
+#define TRACE_(ch) __ORSIM_DPRINTF(TRACE, __orsim_dbch_##ch)
+#define FIXME_(ch) __ORSIM_DPRINTF(FIXME, __orsim_dbch_##ch)
+#define WARN_(ch) __ORSIM_DPRINTF(WARN, __orsim_dbch_##ch)
+#define ERR_(ch) __ORSIM_DPRINTF(ERR, __orsim_dbch_##ch)
+
+#define TRACE __ORSIM_DPRINTF(TRACE, __orsim_dbch___default)
+#define FIXME __ORSIM_DPRINTF(FIXME, __orsim_dbch___default)
+#define WARN __ORSIM_DPRINTF(WARN, __orsim_dbch___default)
+#define ERR __ORSIM_DPRINTF(ERR, __orsim_dbch___default)
+
+#define DEFAULT_DEBUG_CHANNEL(dbch) \
+ extern char __orsim_dbch_##dbch[]; \
+ static char * const __orsim_dbch___default = __orsim_dbch_##dbch;
+
+#ifndef __ORSIM_NO_DEC_DBCH
+#define DECLARE_DEBUG_CHANNEL(dbch) extern char __orsim_dbch_##dbch[];
+#endif
+
+void debug(int level, const char *format,...) __attribute__((format(printf, 2, 3)));
+
+#endif
Index: Makefile.in
===================================================================
--- Makefile.in (nonexistent)
+++ Makefile.in (revision 1765)
@@ -0,0 +1,337 @@
+# Makefile.in generated by automake 1.6.3 from Makefile.am.
+# @configure_input@
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile -- Makefile for cpu architecture independent simulation
+# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
+#
+# This file is part of OpenRISC 1000 Architectural Simulator.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_alias = @build_alias@
+build_triplet = @build@
+host_alias = @host_alias@
+host_triplet = @host@
+target_alias = @target_alias@
+target_triplet = @target@
+
+EXEEXT = @EXEEXT@
+OBJEXT = @OBJEXT@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+AMTAR = @AMTAR@
+AR = @AR@
+ARFLAGS = @ARFLAGS@
+AWK = @AWK@
+BUILD_DIR = @BUILD_DIR@
+CC = @CC@
+CFLAGS = @CFLAGS@
+CPU_ARCH = @CPU_ARCH@
+DEPDIR = @DEPDIR@
+INCLUDES = @INCLUDES@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LOCAL_CFLAGS = @LOCAL_CFLAGS@
+LOCAL_DEFS = @LOCAL_DEFS@
+MAKE_SHELL = @MAKE_SHELL@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+STRIP = @STRIP@
+SUMVERSION = @SUMVERSION@
+TERMCAP_LIB = @TERMCAP_LIB@
+VERSION = @VERSION@
+am__include = @am__include@
+am__quote = @am__quote@
+host = @host@
+host_cpu = @host_cpu@
+host_os = @host_os@
+install_sh = @install_sh@
+
+noinst_LIBRARIES = libsupport.a
+libsupport_a_SOURCES = simprintf.c dumpverilog.c profile.c sched.c
+subdir = support
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libsupport_a_AR = $(AR) cru
+libsupport_a_LIBADD =
+am_libsupport_a_OBJECTS = simprintf.$(OBJEXT) dumpverilog.$(OBJEXT) \
+ profile.$(OBJEXT) sched.$(OBJEXT)
+libsupport_a_OBJECTS = $(am_libsupport_a_OBJECTS)
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/dumpverilog.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/profile.Po ./$(DEPDIR)/sched.Po \
+@AMDEP_TRUE@ ./$(DEPDIR)/simprintf.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libsupport_a_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(libsupport_a_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu support/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libsupport.a: $(libsupport_a_OBJECTS) $(libsupport_a_DEPENDENCIES)
+ -rm -f libsupport.a
+ $(libsupport_a_AR) libsupport.a $(libsupport_a_OBJECTS) $(libsupport_a_LIBADD)
+ $(RANLIB) libsupport.a
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dumpverilog.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/profile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sched.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/simprintf.Po@am__quote@
+
+distclean-depend:
+ -rm -rf ./$(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+ $(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+ETAGS = etags
+ETAGSFLAGS =
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$tags$$unique" \
+ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+ @list='$(DISTFILES)'; for file in $$list; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkinstalldirs) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+ distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-generic \
+ clean-noinstLIBRARIES distclean distclean-compile \
+ distclean-depend distclean-generic distclean-tags distdir dvi \
+ dvi-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic tags uninstall uninstall-am \
+ uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
Index: profile.c
===================================================================
--- profile.c (nonexistent)
+++ profile.c (revision 1765)
@@ -0,0 +1,41 @@
+/* profile.c -- functions for profiling
+ Copyright (C) 2002 Marko Mlinar, markom@opencores.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#include
+
+#include "config.h"
+
+#ifdef HAVE_INTTYPES_H
+#include
+#endif
+
+#include "port.h"
+#include "arch.h"
+#include "profile.h"
+#include "sim-config.h"
+
+/* Adds a new entry to the memory profile file */
+void mprofile (oraddr_t memaddr, unsigned char type)
+{
+ struct mprofentry_struct mp;
+ mp.addr = memaddr;
+ mp.type = type;
+ if(!fwrite (&mp, sizeof (struct mprofentry_struct), 1, runtime.sim.fmprof))
+ config.sim.mprofile = 0;
+}
profile.c
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: profile.h
===================================================================
--- profile.h (nonexistent)
+++ profile.h (revision 1765)
@@ -0,0 +1,33 @@
+/* profile.c -- definitions for profiling
+ Copyright (C) 2002 Marko Mlinar, markom@opencores.org
+
+This file is part of OpenRISC 1000 Architectural Simulator.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+#define MPROF_READ 1
+#define MPROF_WRITE 2
+#define MPROF_FETCH 4
+#define MPROF_8 8
+#define MPROF_16 16
+#define MPROF_32 32
+
+/* Adds a new entry to the memory profile file */
+void mprofile (oraddr_t memaddr, unsigned char type);
+
+struct mprofentry_struct {
+ oraddr_t addr;
+ unsigned char type;
+};
profile.h
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: dumpverilog.h
===================================================================
--- dumpverilog.h (nonexistent)
+++ dumpverilog.h (revision 1765)
@@ -0,0 +1,47 @@
+#define DW 32 /* Data width of memory model generated by dumpverilog in bits */
+#define DWQ (DW/8) /* Same as DW but units are bytes */
+#define DISWIDTH 25 /* Width of disassembled message in bytes */
+
+#define OR1K_MEM_VERILOG_HEADER(MODNAME, FROMADDR, TOADDR, DISWIDTH) "\n"\
+"include \"general.h\"\n\n"\
+"`timescale 1ns/100ps\n\n"\
+"// Simple dw-wide Sync SRAM with initial content generated by or1ksim.\n"\
+"// All control, data in and addr signals are sampled at rising clock edge \n"\
+"// Data out is not registered. Address bits specify dw-word (narrowest \n"\
+"// addressed data is not byte but dw-word !). \n"\
+"// There are still some bugs in generated output (dump word aligned regions)\n\n"\
+"module %s(clk, data, addr, ce, we, disout);\n\n"\
+"parameter dw = 32;\n"\
+"parameter amin = %d;\n\n"\
+"parameter amax = %d;\n\n"\
+"input clk;\n"\
+"inout [dw-1:0] data;\n"\
+"input [31:0] addr;\n"\
+"input ce;\n"\
+"input we;\n"\
+"output [%d:0] disout;\n\n"\
+"reg [%d:0] disout;\n"\
+"reg [dw-1:0] mem [amax:amin];\n"\
+"reg [%d:0] dis [amax:amin];\n"\
+"reg [dw-1:0] dataout;\n"\
+"tri [dw-1:0] data = (ce && ~we) ? dataout : 'bz;\n\n"\
+"initial begin\n", MODNAME, FROMADDR, TOADDR, DISWIDTH-1, DISWIDTH-1, DISWIDTH-1
+
+#define OR1K_MEM_VERILOG_FOOTER "\n\
+end\n\n\
+always @(posedge clk) begin\n\
+ if (ce && ~we) begin\n\
+ dataout <= #1 mem[addr];\n\
+ disout <= #1 dis[addr];\n\
+ $display(\"or1k_mem: reading mem[%%0d]:%%h dis: %%0s\", addr, dataout, dis[addr]);\n\
+ end else\n\
+ if (ce && we) begin\n\
+ mem[addr] <= #1 data;\n\
+ dis[addr] <= #1 \"(data)\";\n\
+ $display(\"or1k_mem: writing mem[%%0d]:%%h dis: %%0s\", addr, mem[addr], dis[addr]);\n\
+ end\n\
+end\n\n\
+endmodule\n"
+
+void dumpverilog(char *verilog_modname, unsigned int from, unsigned int to);
+void dumphex(unsigned int from, unsigned int to);
Index: .
===================================================================
--- . (nonexistent)
+++ . (revision 1765)
.
Property changes :
Added: svn:ignore
## -0,0 +1,2 ##
+Makefile
+.deps