OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path
    /or1k/tags/nog_patch_67/or1ksim/pm
    from Rev 1460 to Rev 1765
    Reverse comparison

Rev 1460 → Rev 1765

/pm.c
0,0 → 1,63
/* pm.c -- Simulation of OpenRISC 1000 power management
Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/* This is functional simulation of OpenRISC 1000 architectural
power management.
*/
 
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
 
#include "config.h"
 
#ifdef HAVE_INTTYPES_H
#include <inttypes.h>
#endif
 
#include "port.h"
#include "arch.h"
#include "abstract.h"
#include "pm.h"
#include "opcode/or32.h"
#include "spr_defs.h"
#include "execute.h"
#include "sprs.h"
 
extern int cont_run;
 
/* Reset. It initializes PMR register. */
void pm_reset()
{
if (config.sim.verbose) PRINTF("Resetting Power Management.\n");
mtspr(SPR_PMR, 0);
}
 
/*-----------------------------------------------------[ PM Configuration ]---*/
void pm_enabled(union param_val val, void *dat)
{
config.pm.enabled = val.int_val;
}
 
void reg_pm_sec(void)
{
struct config_section *sec = reg_config_sec("pm", NULL, NULL);
 
reg_config_param(sec, "enabled", paramt_int, pm_enabled);
}
/Makefile.in
0,0 → 1,331
# Makefile.in generated by automake 1.6.3 from Makefile.am.
# @configure_input@
 
# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
 
@SET_MAKE@
 
# Makefile -- Makefile for peripherals simulation
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
SHELL = @SHELL@
 
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
 
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..
 
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
 
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
 
EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AR = @AR@
ARFLAGS = @ARFLAGS@
AWK = @AWK@
BUILD_DIR = @BUILD_DIR@
CC = @CC@
CFLAGS = @CFLAGS@
CPU_ARCH = @CPU_ARCH@
DEPDIR = @DEPDIR@
INCLUDES = @INCLUDES@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LOCAL_CFLAGS = @LOCAL_CFLAGS@
LOCAL_DEFS = @LOCAL_DEFS@
MAKE_SHELL = @MAKE_SHELL@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
STRIP = @STRIP@
SUMVERSION = @SUMVERSION@
TERMCAP_LIB = @TERMCAP_LIB@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
host = @host@
host_cpu = @host_cpu@
host_os = @host_os@
install_sh = @install_sh@
 
noinst_LIBRARIES = libpm.a
libpm_a_SOURCES = pm.c
subdir = pm
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
 
libpm_a_AR = $(AR) cru
libpm_a_LIBADD =
am_libpm_a_OBJECTS = pm.$(OBJEXT)
libpm_a_OBJECTS = $(am_libpm_a_OBJECTS)
 
DEFS = @DEFS@
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/pm.Po
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES = $(libpm_a_SOURCES)
DIST_COMMON = Makefile.am Makefile.in
SOURCES = $(libpm_a_SOURCES)
 
all: all-am
 
.SUFFIXES:
.SUFFIXES: .c .o .obj
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && \
$(AUTOMAKE) --gnu pm/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)
 
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
libpm.a: $(libpm_a_OBJECTS) $(libpm_a_DEPENDENCIES)
-rm -f libpm.a
$(libpm_a_AR) libpm.a $(libpm_a_OBJECTS) $(libpm_a_LIBADD)
$(RANLIB) libpm.a
 
mostlyclean-compile:
-rm -f *.$(OBJEXT) core *.core
 
distclean-compile:
-rm -f *.tab.c
 
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pm.Po@am__quote@
 
distclean-depend:
-rm -rf ./$(DEPDIR)
 
.c.o:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<
 
.c.obj:
@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
$(COMPILE) -c `cygpath -w $<`
CCDEPMODE = @CCDEPMODE@
uninstall-info-am:
 
ETAGS = etags
ETAGSFLAGS =
 
tags: TAGS
 
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
mkid -fID $$unique
 
TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$tags$$unique" \
|| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique
 
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
 
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 
top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
 
distdir: $(DISTFILES)
@list='$(DISTFILES)'; for file in $$list; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
if test "$$dir" != "$$file" && test "$$dir" != "."; then \
dir="/$$dir"; \
$(mkinstalldirs) "$(distdir)$$dir"; \
else \
dir=''; \
fi; \
if test -d $$d/$$file; then \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(LIBRARIES)
 
installdirs:
 
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
 
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
installcheck: installcheck-am
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
 
clean-generic:
 
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
 
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
 
clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
 
distclean: distclean-am
 
distclean-am: clean-am distclean-compile distclean-depend \
distclean-generic distclean-tags
 
dvi: dvi-am
 
dvi-am:
 
info: info-am
 
info-am:
 
install-data-am:
 
install-exec-am:
 
install-info: install-info-am
 
install-man:
 
installcheck-am:
 
maintainer-clean: maintainer-clean-am
 
maintainer-clean-am: distclean-am maintainer-clean-generic
 
mostlyclean: mostlyclean-am
 
mostlyclean-am: mostlyclean-compile mostlyclean-generic
 
uninstall-am: uninstall-info-am
 
.PHONY: GTAGS all all-am check check-am clean clean-generic \
clean-noinstLIBRARIES distclean distclean-compile \
distclean-depend distclean-generic distclean-tags distdir dvi \
dvi-am info info-am install install-am install-data \
install-data-am install-exec install-exec-am install-info \
install-info-am install-man install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-compile \
mostlyclean-generic tags uninstall uninstall-am \
uninstall-info-am
 
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
/pm.h
0,0 → 1,23
/* pm.h -- Definition of types and structures for openrisc 1000 PM
Copyright (C) 2000 Damjan Lampret, lampret@opencores.org
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/* Prototypes */
void pm_reset();
 
 
/Makefile.am
0,0 → 1,22
# Makefile -- Makefile for peripherals simulation
# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
#
# This file is part of OpenRISC 1000 Architectural Simulator.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
 
noinst_LIBRARIES = libpm.a
libpm_a_SOURCES = pm.c
/.
. Property changes : Added: svn:ignore ## -0,0 +1,2 ## +Makefile +.deps

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.