URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/ecos-2.0/packages/devs/serial/sh/se77x9
- from Rev 1254 to Rev 1765
- ↔ Reverse comparison
Rev 1254 → Rev 1765
/v2_0/cdl/ser_sh_se77x9.cdl
0,0 → 1,194
# ==================================================================== |
# |
# ser_sh_se77x9.cdl |
# |
# eCos serial SH/SE77X9 configuration data |
# |
# ==================================================================== |
#####ECOSGPLCOPYRIGHTBEGIN#### |
## ------------------------------------------- |
## This file is part of eCos, the Embedded Configurable Operating System. |
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
## |
## eCos is free software; you can redistribute it and/or modify it under |
## the terms of the GNU General Public License as published by the Free |
## Software Foundation; either version 2 or (at your option) any later version. |
## |
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
## WARRANTY; without even the implied warranty of MERCHANTABILITY or |
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
## for more details. |
## |
## You should have received a copy of the GNU General Public License along |
## with eCos; if not, write to the Free Software Foundation, Inc., |
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
## |
## As a special exception, if other files instantiate templates or use macros |
## or inline functions from this file, or you compile this file and link it |
## with other works to produce a work based on this file, this file does not |
## by itself cause the resulting work to be covered by the GNU General Public |
## License. However the source code for this file must still be made available |
## in accordance with section (3) of the GNU General Public License. |
## |
## This exception does not invalidate any other reasons why a work based on |
## this file might be covered by the GNU General Public License. |
## |
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
## at http://sources.redhat.com/ecos/ecos-license/ |
## ------------------------------------------- |
#####ECOSGPLCOPYRIGHTEND#### |
# ==================================================================== |
######DESCRIPTIONBEGIN#### |
# |
# Author(s): jskov |
# Contributors: |
# Date: 2001-06-18 |
# |
#####DESCRIPTIONEND#### |
# |
# ==================================================================== |
|
|
cdl_package CYGPKG_IO_SERIAL_SH_SE77X9 { |
display "SH3 SE77X9 serial device drivers" |
|
parent CYGPKG_IO_SERIAL_DEVICES |
active_if CYGPKG_IO_SERIAL |
active_if CYGPKG_HAL_SH_SH77X9_SE77X9 |
|
requires CYGPKG_ERROR |
include_dir cyg/io |
|
description " |
This option enables the serial device drivers for the |
Hitachi SH3 SE77X9 board, based on the generic SH SCI driver." |
|
|
# FIXME: This really belongs in the SH_SCIF package |
cdl_interface CYGINT_IO_SERIAL_SH_SCIF_REQUIRED { |
display "SH SCI driver required" |
} |
|
# FIXME: This really belongs in the GENERIC_16X5X package |
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED { |
display "Generic 16x5x serial driver required" |
} |
|
define_proc { |
puts $::cdl_system_header "/***** serial driver proc output start *****/" |
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/sh_sh3_se77x9_16x5x.inl>" |
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_serial_sh_se77x9.h>" |
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_INL <cyg/io/sh_sh3_se77x9_scif.inl>" |
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_CFG <pkgconf/io_serial_sh_se77x9.h>" |
puts $::cdl_system_header "/***** serial driver proc output end *****/" |
} |
|
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM1 { |
display "SH SE77X9 serial 1 driver (SuperIO)" |
flavor bool |
calculated 0 |
description " |
This option includes the serial device driver for the COM1 |
port. FIXME: Disabled due to being broken." |
|
implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED |
implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW |
implements CYGINT_IO_SERIAL_LINE_STATUS_HW |
|
cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME { |
display "Device name for COM1" |
flavor data |
default_value {"\"/dev/ser1\""} |
description " |
This option specifies the device name for COM1." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD { |
display "Baud rate for COM1" |
flavor data |
legal_values { 4800 9600 14400 19200 38400 57600 115200 } |
default_value 38400 |
description " |
This option specifies the default baud rate (speed) |
for the COM1 port." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE { |
display "Buffer size for COM1" |
flavor data |
legal_values 0 to 8192 |
default_value 128 |
description " |
This option specifies the size of the internal buffers |
used for the COM1 port." |
} |
} |
|
# SCIF port |
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM2 { |
display "SE77X9 serial, SCIF port 2 driver" |
flavor bool |
default_value 1 |
description " |
This option includes the serial device driver for SCIF |
port 2." |
|
implements CYGINT_IO_SERIAL_SH_SCIF_REQUIRED |
implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW |
implements CYGINT_IO_SERIAL_LINE_STATUS_HW |
|
cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME { |
display "Device name" |
flavor data |
default_value {"\"/dev/ser2\""} |
description " |
This option specifies the device name for the serial |
port." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD { |
display "Baud rate" |
flavor data |
legal_values { 4800 9600 14400 19200 38400 57600 115200 } |
default_value 38400 |
description " |
This option specifies the default baud rate (speed) |
for the serial driver." |
} |
|
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE { |
display "Buffer size" |
flavor data |
legal_values 0 to 8192 |
default_value 128 |
description " |
This option specifies the size of the internal buffers |
used for the serial driver." |
} |
|
cdl_option CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA { |
display "Enable SCIF serial driver DMA" |
active_if CYGINT_HAL_SH_DMA_CHANNELS |
implements CYGINT_HAL_SH_DMA_CHANNELS_USED |
implements CYGINT_IO_SERIAL_SH_SCIF_DMA |
default_value 1 |
description " |
Enable DMA for this port." |
} |
} |
|
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_TESTING { |
display "Testing parameters" |
flavor bool |
calculated 1 |
no_define |
active_if CYGPKG_IO_SERIAL_SH_SE77X9_COM2 |
|
define_proc { |
puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"sh-se77x9\"" |
puts $::cdl_header "#define CYGPRI_SER_TEST_SER_DEV CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME" |
puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV \"/dev/tty2\"" |
} |
} |
} |
# EOF ser_sh_se77x9.cdl |
/v2_0/include/sh_sh3_se77x9_scif.inl
0,0 → 1,114
#ifndef CYGONCE_DEVS_SH_SE77X9_SCIF_H |
#define CYGONCE_DEVS_SH_SE77X9_SCIF_H |
|
//========================================================================== |
// |
// io/serial/sh/sh_sh3_se77x9_scif.inl |
// |
// Serial I/O specification for Hitachi SE77X9 platform. |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): jskov |
// Contributors:jskov |
// Date: 2001-06-18 |
// Purpose: Specifies serial resources for the platform. |
// Description: This file can be include from either SCI or SCIF/IRDA driver |
// sources and should specify driver information as required |
// for the platform. |
// |
//####DESCRIPTIONEND#### |
//========================================================================== |
|
#include <pkgconf/io_serial_sh_se77x9.h> |
|
#ifdef CYGPKG_IO_SERIAL_SH_SE77X9_COM2 |
static sh_scif_info se77x9_serial_info2 = { |
er_int_num : CYGNUM_HAL_INTERRUPT_SCIF_ERI2, |
rx_int_num : CYGNUM_HAL_INTERRUPT_SCIF_RXI2, |
tx_int_num : CYGNUM_HAL_INTERRUPT_SCIF_TXI2, |
ctrl_base : CYGARC_REG_SCIF_SCSMR2, |
#ifdef CYGINT_IO_SERIAL_SH_SCIF_DMA |
# ifdef CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA |
dma_enable : true,// we want DMA for this channel |
dma_xmt_cr_flags : CYGARC_REG_CHCR_RS_SCIF_TX |
# else |
dma_enable : false // No DMA |
# endif |
#endif |
}; |
|
#if CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE > 0 |
static unsigned char se77x9_serial_out_buf2[CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE]; |
static unsigned char se77x9_serial_in_buf2[CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE]; |
|
static SERIAL_CHANNEL_USING_INTERRUPTS(se77x9_serial_channel2, |
sh_scif_funs, |
se77x9_serial_info2, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT, |
&se77x9_serial_out_buf2[0], |
sizeof(se77x9_serial_out_buf2), |
&se77x9_serial_in_buf2[0], |
sizeof(se77x9_serial_in_buf2) |
); |
#else |
static SERIAL_CHANNEL(se77x9_serial_channel2, |
sh_scif_funs, |
se77x9_serial_info2, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT |
); |
#endif |
|
DEVTAB_ENTRY(sh_serial_io2, |
CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME, |
0, // Does not depend on a lower level interface |
&cyg_io_serial_devio, |
sh_scif_init, |
sh_scif_lookup, // Serial driver may need initializing |
&se77x9_serial_channel2 |
); |
#endif // CYGPKG_IO_SERIAL_SH_SE77X9_COM2 |
|
#endif // CYGONCE_DEVS_SH_SE77X9_SCIF_H |
/v2_0/include/sh_sh3_se77x9_16x5x.inl
0,0 → 1,124
#ifndef CYGONCE_DEVS_SH_SE77X9_16X5X_H |
#define CYGONCE_DEVS_SH_SE77X9_16X5X_H |
|
//========================================================================== |
// |
// io/serial/sh/sh_sh3_se77x9_16x5x.inl |
// |
// Serial I/O specification for Hitachi SE77X9 platform. |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): jskov |
// Contributors:jskov |
// Date: 2001-06-18 |
// Purpose: Specifies serial resources for the platform. |
// Description: This file can be include from the 16x5x driver sources. |
// |
//####DESCRIPTIONEND#### |
//========================================================================== |
|
#include <pkgconf/io_serial_sh_se77x9.h> |
|
//----------------------------------------------------------------------------- |
// Baud rate specification, based on raw 1.8462MHz clock (/16) |
|
static unsigned short select_baud[] = { |
0, // Unused |
2307, // 50 |
1538, // 75 |
1048, // 110 |
857, // 134.5 |
769, // 150 |
576, // 200 |
384, // 300 |
192, // 600 |
96, // 1200 |
64, // 1800 |
48, // 2400 |
32, // 3600 |
24, // 4800 |
16, // 7200 |
12, // 9600 |
8, // 14400 |
6, // 19200 |
3, // 38400 |
2, // 57600 |
1, // 115200 |
0, // 230400 |
}; |
|
#ifdef CYGPKG_IO_SERIAL_SH_SE77X9_COM1 |
static pc_serial_info se77x9_serial_info1 = {0xb04007f0, CYGNUM_HAL_INTERRUPT_COM1}; |
#if CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE > 0 |
static unsigned char se77x9_serial_out_buf1[CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE]; |
static unsigned char se77x9_serial_in_buf1[CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE]; |
|
static SERIAL_CHANNEL_USING_INTERRUPTS(se77x9_serial_channel1, |
pc_serial_funs, |
se77x9_serial_info1, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT, |
&se77x9_serial_out_buf1[0], sizeof(se77x9_serial_out_buf1), |
&se77x9_serial_in_buf1[0], sizeof(se77x9_serial_in_buf1) |
); |
#else |
static SERIAL_CHANNEL(se77x9_serial_channel1, |
pc_serial_funs, |
se77x9_serial_info1, |
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD), |
CYG_SERIAL_STOP_DEFAULT, |
CYG_SERIAL_PARITY_DEFAULT, |
CYG_SERIAL_WORD_LENGTH_DEFAULT, |
CYG_SERIAL_FLAGS_DEFAULT |
); |
#endif |
|
DEVTAB_ENTRY(se77x9_serial_io1, |
CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME, |
0, // Does not depend on a lower level interface |
&cyg_io_serial_devio, |
pc_serial_init, |
pc_serial_lookup, // Serial driver may need initializing |
&se77x9_serial_channel1 |
); |
#endif // CYGPKG_IO_SERIAL_SH_SE77X9_COM1 |
|
#endif // CYGONCE_DEVS_SH_SE77X9_SCIF_H |
/v2_0/ChangeLog
0,0 → 1,52
2003-02-24 Jonathan Larmour <jifl@eCosCentric.com> |
|
* cdl/ser_sh_se77x9.cdl: Remove irrelevant doc link. |
|
2002-05-08 Jesper Skov <jskov@redhat.com> |
|
* include/sh_sh3_se77x9_scif.inl: CYGINT_IO_SERIAL_SH_SCIF_DMA is |
now booldata. Rename sh3_scif to sh_scif. Register renaming. |
|
2001-06-19 Jesper Skov <jskov@redhat.com> |
|
* cdl/ser_sh_se77x9.cdl: Disable COM1 driver for now since it |
breaks eCos. |
|
2001-06-18 Jesper Skov <jskov@redhat.com> |
|
* New package. |
|
//=========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//=========================================================================== |