OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

Compare Revisions

  • This comparison shows the changes necessary to convert path 
    /or1k/trunk/ecos-2.0/packages/devs/serial/sh/se77x9
    from Rev 1254 to Rev 1765
    ↔ Reverse comparison
  •

Rev 1254 → Rev 1765

/v2_0/cdl/ser_sh_se77x9.cdl
0,0 → 1,194
# ====================================================================
#
# ser_sh_se77x9.cdl
#
# eCos serial SH/SE77X9 configuration data
#
# ====================================================================
#####ECOSGPLCOPYRIGHTBEGIN####
## -------------------------------------------
## This file is part of eCos, the Embedded Configurable Operating System.
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
##
## eCos is free software; you can redistribute it and/or modify it under
## the terms of the GNU General Public License as published by the Free
## Software Foundation; either version 2 or (at your option) any later version.
##
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
## WARRANTY; without even the implied warranty of MERCHANTABILITY or
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
## for more details.
##
## You should have received a copy of the GNU General Public License along
## with eCos; if not, write to the Free Software Foundation, Inc.,
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
##
## As a special exception, if other files instantiate templates or use macros
## or inline functions from this file, or you compile this file and link it
## with other works to produce a work based on this file, this file does not
## by itself cause the resulting work to be covered by the GNU General Public
## License. However the source code for this file must still be made available
## in accordance with section (3) of the GNU General Public License.
##
## This exception does not invalidate any other reasons why a work based on
## this file might be covered by the GNU General Public License.
##
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
## at http://sources.redhat.com/ecos/ecos-license/
## -------------------------------------------
#####ECOSGPLCOPYRIGHTEND####
# ====================================================================
######DESCRIPTIONBEGIN####
#
# Author(s): jskov
# Contributors:
# Date: 2001-06-18
#
#####DESCRIPTIONEND####
#
# ====================================================================
 
 
cdl_package CYGPKG_IO_SERIAL_SH_SE77X9 {
display "SH3 SE77X9 serial device drivers"
 
parent CYGPKG_IO_SERIAL_DEVICES
active_if CYGPKG_IO_SERIAL
active_if CYGPKG_HAL_SH_SH77X9_SE77X9
 
requires CYGPKG_ERROR
include_dir cyg/io
 
description "
This option enables the serial device drivers for the
Hitachi SH3 SE77X9 board, based on the generic SH SCI driver."
 
 
# FIXME: This really belongs in the SH_SCIF package
cdl_interface CYGINT_IO_SERIAL_SH_SCIF_REQUIRED {
display "SH SCI driver required"
}
 
# FIXME: This really belongs in the GENERIC_16X5X package
cdl_interface CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED {
display "Generic 16x5x serial driver required"
}
 
define_proc {
puts $::cdl_system_header "/***** serial driver proc output start *****/"
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_INL <cyg/io/sh_sh3_se77x9_16x5x.inl>"
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_GENERIC_16X5X_CFG <pkgconf/io_serial_sh_se77x9.h>"
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_INL <cyg/io/sh_sh3_se77x9_scif.inl>"
puts $::cdl_system_header "#define CYGDAT_IO_SERIAL_SH_SCIF_CFG <pkgconf/io_serial_sh_se77x9.h>"
puts $::cdl_system_header "/***** serial driver proc output end *****/"
}
 
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM1 {
display "SH SE77X9 serial 1 driver (SuperIO)"
flavor bool
calculated 0
description "
This option includes the serial device driver for the COM1
port. FIXME: Disabled due to being broken."
 
implements CYGINT_IO_SERIAL_GENERIC_16X5X_REQUIRED
implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW
implements CYGINT_IO_SERIAL_LINE_STATUS_HW
 
cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME {
display "Device name for COM1"
flavor data
default_value {"\"/dev/ser1\""}
description "
This option specifies the device name for COM1."
}
 
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD {
display "Baud rate for COM1"
flavor data
legal_values { 4800 9600 14400 19200 38400 57600 115200 }
default_value 38400
description "
This option specifies the default baud rate (speed)
for the COM1 port."
}
 
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE {
display "Buffer size for COM1"
flavor data
legal_values 0 to 8192
default_value 128
description "
This option specifies the size of the internal buffers
used for the COM1 port."
}
}
 
# SCIF port
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_COM2 {
display "SE77X9 serial, SCIF port 2 driver"
flavor bool
default_value 1
description "
This option includes the serial device driver for SCIF
port 2."
 
implements CYGINT_IO_SERIAL_SH_SCIF_REQUIRED
implements CYGINT_IO_SERIAL_FLOW_CONTROL_HW
implements CYGINT_IO_SERIAL_LINE_STATUS_HW
 
cdl_option CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME {
display "Device name"
flavor data
default_value {"\"/dev/ser2\""}
description "
This option specifies the device name for the serial
port."
}
 
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD {
display "Baud rate"
flavor data
legal_values { 4800 9600 14400 19200 38400 57600 115200 }
default_value 38400
description "
This option specifies the default baud rate (speed)
for the serial driver."
}
 
cdl_option CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE {
display "Buffer size"
flavor data
legal_values 0 to 8192
default_value 128
description "
This option specifies the size of the internal buffers
used for the serial driver."
}
 
cdl_option CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA {
display "Enable SCIF serial driver DMA"
active_if CYGINT_HAL_SH_DMA_CHANNELS
implements CYGINT_HAL_SH_DMA_CHANNELS_USED
implements CYGINT_IO_SERIAL_SH_SCIF_DMA
default_value 1
description "
Enable DMA for this port."
}
}
 
cdl_component CYGPKG_IO_SERIAL_SH_SE77X9_TESTING {
display "Testing parameters"
flavor bool
calculated 1
no_define
active_if CYGPKG_IO_SERIAL_SH_SE77X9_COM2
 
define_proc {
puts $::cdl_header "#define CYGPRI_SER_TEST_CRASH_ID \"sh-se77x9\""
puts $::cdl_header "#define CYGPRI_SER_TEST_SER_DEV CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME"
puts $::cdl_header "#define CYGPRI_SER_TEST_TTY_DEV \"/dev/tty2\""
}
}
}
# EOF ser_sh_se77x9.cdl
/v2_0/include/sh_sh3_se77x9_scif.inl
0,0 → 1,114
#ifndef CYGONCE_DEVS_SH_SE77X9_SCIF_H
#define CYGONCE_DEVS_SH_SE77X9_SCIF_H
 
//==========================================================================
//
// io/serial/sh/sh_sh3_se77x9_scif.inl
//
// Serial I/O specification for Hitachi SE77X9 platform.
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): jskov
// Contributors:jskov
// Date: 2001-06-18
// Purpose: Specifies serial resources for the platform.
// Description: This file can be include from either SCI or SCIF/IRDA driver
// sources and should specify driver information as required
// for the platform.
//
//####DESCRIPTIONEND####
//==========================================================================
 
#include <pkgconf/io_serial_sh_se77x9.h>
 
#ifdef CYGPKG_IO_SERIAL_SH_SE77X9_COM2
static sh_scif_info se77x9_serial_info2 = {
er_int_num : CYGNUM_HAL_INTERRUPT_SCIF_ERI2,
rx_int_num : CYGNUM_HAL_INTERRUPT_SCIF_RXI2,
tx_int_num : CYGNUM_HAL_INTERRUPT_SCIF_TXI2,
ctrl_base : CYGARC_REG_SCIF_SCSMR2,
#ifdef CYGINT_IO_SERIAL_SH_SCIF_DMA
# ifdef CYGSEM_IO_SERIAL_SH_SE77X9_COM2_DMA
dma_enable : true,// we want DMA for this channel
dma_xmt_cr_flags : CYGARC_REG_CHCR_RS_SCIF_TX
# else
dma_enable : false // No DMA
# endif
#endif
};
 
#if CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE > 0
static unsigned char se77x9_serial_out_buf2[CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE];
static unsigned char se77x9_serial_in_buf2[CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BUFSIZE];
 
static SERIAL_CHANNEL_USING_INTERRUPTS(se77x9_serial_channel2,
sh_scif_funs,
se77x9_serial_info2,
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD),
CYG_SERIAL_STOP_DEFAULT,
CYG_SERIAL_PARITY_DEFAULT,
CYG_SERIAL_WORD_LENGTH_DEFAULT,
CYG_SERIAL_FLAGS_DEFAULT,
&se77x9_serial_out_buf2[0],
sizeof(se77x9_serial_out_buf2),
&se77x9_serial_in_buf2[0],
sizeof(se77x9_serial_in_buf2)
);
#else
static SERIAL_CHANNEL(se77x9_serial_channel2,
sh_scif_funs,
se77x9_serial_info2,
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM2_BAUD),
CYG_SERIAL_STOP_DEFAULT,
CYG_SERIAL_PARITY_DEFAULT,
CYG_SERIAL_WORD_LENGTH_DEFAULT,
CYG_SERIAL_FLAGS_DEFAULT
);
#endif
 
DEVTAB_ENTRY(sh_serial_io2,
CYGDAT_IO_SERIAL_SH_SE77X9_COM2_NAME,
0, // Does not depend on a lower level interface
&cyg_io_serial_devio,
sh_scif_init,
sh_scif_lookup, // Serial driver may need initializing
&se77x9_serial_channel2
);
#endif // CYGPKG_IO_SERIAL_SH_SE77X9_COM2
 
#endif // CYGONCE_DEVS_SH_SE77X9_SCIF_H
/v2_0/include/sh_sh3_se77x9_16x5x.inl
0,0 → 1,124
#ifndef CYGONCE_DEVS_SH_SE77X9_16X5X_H
#define CYGONCE_DEVS_SH_SE77X9_16X5X_H
 
//==========================================================================
//
// io/serial/sh/sh_sh3_se77x9_16x5x.inl
//
// Serial I/O specification for Hitachi SE77X9 platform.
//
//==========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//==========================================================================
//#####DESCRIPTIONBEGIN####
//
// Author(s): jskov
// Contributors:jskov
// Date: 2001-06-18
// Purpose: Specifies serial resources for the platform.
// Description: This file can be include from the 16x5x driver sources.
//
//####DESCRIPTIONEND####
//==========================================================================
 
#include <pkgconf/io_serial_sh_se77x9.h>
 
//-----------------------------------------------------------------------------
// Baud rate specification, based on raw 1.8462MHz clock (/16)
 
static unsigned short select_baud[] = {
0, // Unused
2307, // 50
1538, // 75
1048, // 110
857, // 134.5
769, // 150
576, // 200
384, // 300
192, // 600
96, // 1200
64, // 1800
48, // 2400
32, // 3600
24, // 4800
16, // 7200
12, // 9600
8, // 14400
6, // 19200
3, // 38400
2, // 57600
1, // 115200
0, // 230400
};
 
#ifdef CYGPKG_IO_SERIAL_SH_SE77X9_COM1
static pc_serial_info se77x9_serial_info1 = {0xb04007f0, CYGNUM_HAL_INTERRUPT_COM1};
#if CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE > 0
static unsigned char se77x9_serial_out_buf1[CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE];
static unsigned char se77x9_serial_in_buf1[CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BUFSIZE];
 
static SERIAL_CHANNEL_USING_INTERRUPTS(se77x9_serial_channel1,
pc_serial_funs,
se77x9_serial_info1,
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD),
CYG_SERIAL_STOP_DEFAULT,
CYG_SERIAL_PARITY_DEFAULT,
CYG_SERIAL_WORD_LENGTH_DEFAULT,
CYG_SERIAL_FLAGS_DEFAULT,
&se77x9_serial_out_buf1[0], sizeof(se77x9_serial_out_buf1),
&se77x9_serial_in_buf1[0], sizeof(se77x9_serial_in_buf1)
);
#else
static SERIAL_CHANNEL(se77x9_serial_channel1,
pc_serial_funs,
se77x9_serial_info1,
CYG_SERIAL_BAUD_RATE(CYGNUM_IO_SERIAL_SH_SE77X9_COM1_BAUD),
CYG_SERIAL_STOP_DEFAULT,
CYG_SERIAL_PARITY_DEFAULT,
CYG_SERIAL_WORD_LENGTH_DEFAULT,
CYG_SERIAL_FLAGS_DEFAULT
);
#endif
 
DEVTAB_ENTRY(se77x9_serial_io1,
CYGDAT_IO_SERIAL_SH_SE77X9_COM1_NAME,
0, // Does not depend on a lower level interface
&cyg_io_serial_devio,
pc_serial_init,
pc_serial_lookup, // Serial driver may need initializing
&se77x9_serial_channel1
);
#endif // CYGPKG_IO_SERIAL_SH_SE77X9_COM1
 
#endif // CYGONCE_DEVS_SH_SE77X9_SCIF_H
/v2_0/ChangeLog
0,0 → 1,52
2003-02-24 Jonathan Larmour <jifl@eCosCentric.com>
 
* cdl/ser_sh_se77x9.cdl: Remove irrelevant doc link.
 
2002-05-08 Jesper Skov <jskov@redhat.com>
 
* include/sh_sh3_se77x9_scif.inl: CYGINT_IO_SERIAL_SH_SCIF_DMA is
now booldata. Rename sh3_scif to sh_scif. Register renaming.
 
2001-06-19 Jesper Skov <jskov@redhat.com>
 
* cdl/ser_sh_se77x9.cdl: Disable COM1 driver for now since it
breaks eCos.
 
2001-06-18 Jesper Skov <jskov@redhat.com>
 
* New package.
 
//===========================================================================
//####ECOSGPLCOPYRIGHTBEGIN####
// -------------------------------------------
// This file is part of eCos, the Embedded Configurable Operating System.
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
//
// eCos is free software; you can redistribute it and/or modify it under
// the terms of the GNU General Public License as published by the Free
// Software Foundation; either version 2 or (at your option) any later version.
//
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
// for more details.
//
// You should have received a copy of the GNU General Public License along
// with eCos; if not, write to the Free Software Foundation, Inc.,
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
//
// As a special exception, if other files instantiate templates or use macros
// or inline functions from this file, or you compile this file and link it
// with other works to produce a work based on this file, this file does not
// by itself cause the resulting work to be covered by the GNU General Public
// License. However the source code for this file must still be made available
// in accordance with section (3) of the GNU General Public License.
//
// This exception does not invalidate any other reasons why a work based on
// this file might be covered by the GNU General Public License.
//
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
// at http://sources.redhat.com/ecos/ecos-license/
// -------------------------------------------
//####ECOSGPLCOPYRIGHTEND####
//===========================================================================

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.