URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
Compare Revisions
- This comparison shows the changes necessary to convert path
/or1k/trunk/ecos-2.0/packages/fs/rom
- from Rev 1254 to Rev 1765
- ↔ Reverse comparison
Rev 1254 → Rev 1765
/v2_0/cdl/romfs.cdl
0,0 → 1,111
# ==================================================================== |
# |
# romfs.cdl |
# |
# ROM Filesystem configuration data |
# |
# ==================================================================== |
#####ECOSGPLCOPYRIGHTBEGIN#### |
## ------------------------------------------- |
## This file is part of eCos, the Embedded Configurable Operating System. |
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
## |
## eCos is free software; you can redistribute it and/or modify it under |
## the terms of the GNU General Public License as published by the Free |
## Software Foundation; either version 2 or (at your option) any later version. |
## |
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
## WARRANTY; without even the implied warranty of MERCHANTABILITY or |
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
## for more details. |
## |
## You should have received a copy of the GNU General Public License along |
## with eCos; if not, write to the Free Software Foundation, Inc., |
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
## |
## As a special exception, if other files instantiate templates or use macros |
## or inline functions from this file, or you compile this file and link it |
## with other works to produce a work based on this file, this file does not |
## by itself cause the resulting work to be covered by the GNU General Public |
## License. However the source code for this file must still be made available |
## in accordance with section (3) of the GNU General Public License. |
## |
## This exception does not invalidate any other reasons why a work based on |
## this file might be covered by the GNU General Public License. |
## |
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
## at http://sources.redhat.com/ecos/ecos-license/ |
## ------------------------------------------- |
#####ECOSGPLCOPYRIGHTEND#### |
# ==================================================================== |
######DESCRIPTIONBEGIN#### |
# |
# Author(s): nickg |
# Original data: nickg |
# Contributors: richard.panton@3glab.com |
# Date: 2000-08-01 |
# |
#####DESCRIPTIONEND#### |
# |
# ==================================================================== |
|
cdl_package CYGPKG_FS_ROM { |
display "ROM filesystem" |
doc ref/fileio.html |
include_dir cyg/romfs |
|
requires CYGPKG_IO_FILEIO |
|
requires CYGPKG_ISOINFRA |
requires CYGINT_ISO_ERRNO |
requires CYGINT_ISO_ERRNO_CODES |
|
implements CYGINT_IO_FILEIO_FS |
|
compile -library=libextras.a romfs.c |
|
# ---------------------------------------------------------------- |
# Tests |
|
cdl_component CYGTST_ROMFS_BUILD_TESTS { |
display "Build ROMFS tests" |
flavor bool |
no_define |
default_value 0 |
requires CYGINT_LIBC_STARTUP_CONTEXT |
requires CYGINT_ISO_STDIO_FORMATTED_IO |
requires CYGINT_ISO_STRERROR |
description " |
This option enables the building of the ROMFS tests." |
|
# FIXME: host compiler/flags should be provided by config system |
make -priority 100 { |
<PREFIX>/bin/mk_romfs: <PACKAGE>/support/mk_romfs.c |
@mkdir -p "$(dir $@)" |
@$(HOST_CC) -g -O2 -o $@ $< || cc -g -O2 -o $@ $< || gcc -g -O2 -o $@ $< |
} |
|
make -priority 100 { |
<PREFIX>/include/cyg/romfs/testromfs.h : $(PREFIX)/bin/mk_romfs <PACKAGE>/support/file2c.tcl |
$(PREFIX)/bin/mk_romfs $(REPOSITORY)/$(PACKAGE)/tests/testromfs testromfs.bin |
@mkdir -p "$(dir $@)" |
# work around cygwin path problems by copying to build dir |
@cp $(REPOSITORY)/$(PACKAGE)/support/file2c.tcl . |
sh file2c.tcl testromfs.bin testromfs.h |
@rm -f $@ file2c.tcl |
@cp testromfs.h $@ |
} |
|
|
cdl_option CYGPKG_FS_ROM_TESTS { |
display "ROM FS tests" |
flavor data |
no_define |
calculated { "tests/fileio1.c" } |
description " |
This option specifies the set of tests for the ROM FS package." |
} |
} |
} |
|
# End of romfs.cdl |
/v2_0/tests/testromfs/var/foobar
0,0 → 1,111
flibble |
/v2_0/tests/testromfs/etc/hosts
--- v2_0/tests/testromfs/etc/passwd (nonexistent)
+++ v2_0/tests/testromfs/etc/passwd (revision 1765)
@@ -0,0 +1,32 @@
+root:x:0:0:root:/root:/bin/bash
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+games:x:5:100:games:/usr/games:/bin/sh
+man:x:6:100:man:/var/cache/man:/bin/sh
+lp:x:7:7:lp:/var/spool/lpd:/bin/sh
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+news:x:9:9:news:/var/spool/news:/bin/sh
+uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+majordom:x:30:31:Majordomo:/usr/lib/majordomo:/bin/sh
+postgres:x:31:32:postgres:/var/lib/postgres:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+msql:x:36:36:Mini SQL Database Manager:/var/lib/msql:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+list:x:38:38:SmartList:/var/list:/bin/sh
+irc:x:39:39:ircd:/var:/bin/sh
+gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats/gnats-db:/bin/sh
+alias:x:70:65534:qmail alias:/var/qmail/alias:/bin/sh
+qmaild:x:71:65534:qmail daemon:/var/qmail:/bin/sh
+qmails:x:72:70:qmail send:/var/qmail:/bin/sh
+qmailr:x:73:70:qmail remote:/var/qmail:/bin/sh
+qmailq:x:74:70:qmail queue:/var/qmail:/bin/sh
+qmaill:x:75:65534:qmail log:/var/qmail:/bin/sh
+qmailp:x:76:65534:qmail pw:/var/qmail:/bin/sh
+ftp:x:60000:65534::/lhome/ftp:/bin/false
+nobody:x:65534:65534:nobody:/home:/bin/sh
+identd:x:60001:65534::/var/run/identd:/bin/false
+telnetd:x:60002:60002::/usr/lib/telnetd:/bin/false
/v2_0/tests/testromfs/etc/inetd
--- v2_0/tests/testromfs/mnt/thing (nonexistent)
+++ v2_0/tests/testromfs/mnt/thing (revision 1765)
@@ -0,0 +1 @@
+hi
/v2_0/tests/fileio1.c
0,0 → 1,377
//========================================================================== |
// |
// fileio1.c |
// |
// Test fileio system |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): nickg |
// Contributors: nickg, richard.panton@3glab.com, jlarmour |
// Date: 2000-05-25 |
// Purpose: Test fileio system |
// Description: This test uses the testfs to check out the initialization |
// and basic operation of the fileio system |
// |
//####DESCRIPTIONEND#### |
// |
//========================================================================== |
|
#include <pkgconf/hal.h> |
#include <pkgconf/io_fileio.h> |
#include <pkgconf/isoinfra.h> |
#include <pkgconf/system.h> |
|
#include <unistd.h> |
#include <fcntl.h> |
#include <sys/stat.h> |
#include <errno.h> |
#include <string.h> |
#include <dirent.h> |
#include <stdio.h> |
|
#include <cyg/fileio/fileio.h> |
|
#include <cyg/infra/testcase.h> |
#include <cyg/infra/diag.h> // HAL polled output |
|
#include <cyg/romfs/testromfs.h> // Test ROMFS data |
|
//========================================================================== |
|
MTAB_ENTRY( romfs_mte1, |
"/", |
"romfs", |
"", |
(CYG_ADDRWORD) &filedata[0] ); |
|
|
//========================================================================== |
|
#define SHOW_RESULT( _fn, _res ) \ |
diag_printf("<FAIL>: " #_fn "() returned %d %s\n", _res, _res<0?strerror(errno):""); |
|
#define CHKFAIL_TYPE( _fn, _res, _type ) { \ |
if ( _res != -1 ) \ |
diag_printf("<FAIL>: " #_fn "() returned %d (expected -1)\n", _res); \ |
else if ( errno != _type ) \ |
diag_printf("<FAIL>: " #_fn "() failed with errno %d (%s),\n expected %d (%s)\n", errno, strerror(errno), _type, strerror(_type) ); \ |
} |
|
//========================================================================== |
|
#define IOSIZE 100 |
|
#define LONGNAME1 "long_file_name_that_should_take_up_more_than_one_directory_entry_1" |
#define LONGNAME2 "long_file_name_that_should_take_up_more_than_one_directory_entry_2" |
|
|
//========================================================================== |
|
#ifndef CYGINT_ISO_STRING_STRFUNCS |
|
char *strcat( char *s1, const char *s2 ) |
{ |
char *s = s1; |
while( *s1 ) s1++; |
while( (*s1++ = *s2++) != 0); |
return s; |
} |
|
#endif |
|
//========================================================================== |
|
static void listdir( char *name, int statp ) |
{ |
int err; |
DIR *dirp; |
|
diag_printf("<INFO>: reading directory %s\n",name); |
|
dirp = opendir( name ); |
if( dirp == NULL ) SHOW_RESULT( opendir, -1 ); |
|
for(;;) |
{ |
struct dirent *entry = readdir( dirp ); |
|
if( entry == NULL ) |
break; |
|
diag_printf("<INFO>: entry %14s",entry->d_name); |
if( statp ) |
{ |
char fullname[PATH_MAX]; |
struct stat sbuf; |
|
if( name[0] ) |
{ |
strcpy(fullname, name ); |
if( !(name[0] == '/' && name[1] == 0 ) ) |
strcat(fullname, "/" ); |
} |
else fullname[0] = 0; |
|
strcat(fullname, entry->d_name ); |
|
err = stat( fullname, &sbuf ); |
if( err < 0 ) |
{ |
if( errno == ENOSYS ) |
diag_printf(" <no status available>"); |
else SHOW_RESULT( stat, err ); |
} |
else |
{ |
diag_printf(" [mode %08x ino %08x nlink %d size %d]", |
sbuf.st_mode,sbuf.st_ino,sbuf.st_nlink,sbuf.st_size); |
} |
} |
|
diag_printf("\n"); |
} |
|
err = closedir( dirp ); |
if( err < 0 ) SHOW_RESULT( stat, err ); |
} |
|
//========================================================================== |
|
#ifdef CYGPKG_FS_RAM |
static void copyfile( char *name2, char *name1 ) |
{ |
|
int err; |
char buf[IOSIZE]; |
int fd1, fd2; |
ssize_t done, wrote; |
|
diag_printf("<INFO>: copy file %s -> %s\n",name2,name1); |
|
err = access( name1, F_OK ); |
if( err < 0 && errno != EACCES ) SHOW_RESULT( access, err ); |
|
err = access( name2, F_OK ); |
if( err != 0 ) SHOW_RESULT( access, err ); |
|
fd1 = open( name1, O_WRONLY|O_CREAT ); |
if( fd1 < 0 ) SHOW_RESULT( open, fd1 ); |
|
fd2 = open( name2, O_RDONLY ); |
if( fd2 < 0 ) SHOW_RESULT( open, fd2 ); |
|
for(;;) |
{ |
done = read( fd2, buf, IOSIZE ); |
if( done < 0 ) SHOW_RESULT( read, done ); |
|
if( done == 0 ) break; |
|
wrote = write( fd1, buf, done ); |
if( wrote != done ) SHOW_RESULT( write, wrote ); |
|
if( wrote != done ) break; |
} |
|
err = close( fd1 ); |
if( err < 0 ) SHOW_RESULT( close, err ); |
|
err = close( fd2 ); |
if( err < 0 ) SHOW_RESULT( close, err ); |
|
} |
#endif |
|
//========================================================================== |
|
static void comparefiles( char *name2, char *name1 ) |
{ |
int err; |
char buf1[IOSIZE]; |
char buf2[IOSIZE]; |
int fd1, fd2; |
ssize_t done1, done2; |
int i; |
|
diag_printf("<INFO>: compare files %s == %s\n",name2,name1); |
|
err = access( name1, F_OK ); |
if( err != 0 ) SHOW_RESULT( access, err ); |
|
err = access( name1, F_OK ); |
if( err != 0 ) SHOW_RESULT( access, err ); |
|
fd1 = open( name1, O_RDONLY ); |
if( fd1 < 0 ) SHOW_RESULT( open, fd1 ); |
|
fd2 = open( name2, O_RDONLY ); |
if( fd2 < 0 ) SHOW_RESULT( open, fd2 ); |
|
for(;;) |
{ |
done1 = read( fd1, buf1, IOSIZE ); |
if( done1 < 0 ) SHOW_RESULT( read, done1 ); |
|
done2 = read( fd2, buf2, IOSIZE ); |
if( done2 < 0 ) SHOW_RESULT( read, done2 ); |
|
if( done1 != done2 ) |
diag_printf("Files different sizes\n"); |
|
if( done1 == 0 ) break; |
|
for( i = 0; i < done1; i++ ) |
if( buf1[i] != buf2[i] ) |
{ |
diag_printf("buf1[%d](%02x) != buf1[%d](%02x)\n",i,buf1[i],i,buf2[i]); |
CYG_TEST_FAIL("Data in files not equal\n"); |
} |
} |
|
err = close( fd1 ); |
if( err < 0 ) SHOW_RESULT( close, err ); |
|
err = close( fd2 ); |
if( err < 0 ) SHOW_RESULT( close, err ); |
|
} |
|
//========================================================================== |
// main |
|
int main( int argc, char **argv ) |
{ |
int err; |
char address[16]; |
|
CYG_TEST_INIT(); |
|
// -------------------------------------------------------------- |
|
diag_printf("<INFO>: ROMFS root follows\n"); |
listdir( "/", true ); |
|
diag_printf("<INFO>: cd /etc\n" ); |
err = chdir( "/etc" ); |
if ( err < 0 ) SHOW_RESULT( chdir, err ); |
|
diag_printf("<INFO>: ROMFS list of '' follows\n"); |
listdir( "", true ); |
|
diag_printf("<INFO>: ROMFS list of /etc follows\n"); |
listdir( "/etc", true ); |
|
diag_printf("<INFO>: ROMFS list of . follows\n"); |
listdir( ".", true ); |
|
#ifdef CYGPKG_FS_RAM |
err = mount( "", "/var", "ramfs" ); |
if( err < 0 ) SHOW_RESULT( mount, err ); |
|
copyfile( "/etc/passwd", "/var/passwd_copy" ); |
|
comparefiles( "/etc/passwd", "/var/passwd_copy" ); |
#endif |
|
diag_printf("<INFO>: ROMFS list of / follows\n"); |
#ifdef CYGPKG_FS_RAM |
diag_printf("<INFO>: Note that /var now gives stat() info for RAMFS\n"); |
#endif |
listdir( "/", true ); |
|
diag_printf("<INFO>: Mount ROMFS again onto /mnt\n"); |
sprintf( address, "%p", (void*)&filedata[0] ); |
err = mount( address, "/mnt", "romfs" ); |
if( err < 0 ) SHOW_RESULT( mount, err ); |
|
comparefiles( "/etc/passwd", "/mnt/etc/passwd" ); |
|
|
err = mkdir( "/foo", 0 ); |
CHKFAIL_TYPE( mkdir, err, EROFS ); |
|
err = rename( "/var", "/tmp" ); // RAMFS is mounted here |
#ifdef CYGPKG_FS_RAM |
CHKFAIL_TYPE( rename, err, EXDEV ); |
#else |
CHKFAIL_TYPE( rename, err, EROFS ); |
#endif |
|
err = rename( "/var/passwd_copy", "/mnt/etc/passwd_copy" ); |
CHKFAIL_TYPE( rename, err, EXDEV ); |
|
err = rename( "/etc", "/tmp" ); |
CHKFAIL_TYPE( rename, err, EROFS ); |
|
diag_printf("<INFO>: cd /etc\n"); |
err = chdir( "/etc" ); |
if( err < 0 ) SHOW_RESULT( chdir, err ); |
|
err = chdir( "/mnt/etc" ); |
if( err < 0 ) SHOW_RESULT( chdir, err ); |
|
listdir( ".", true ); |
|
diag_printf("<INFO>: unlink /tmp\n"); |
err = unlink( "/tmp" ); |
CHKFAIL_TYPE( unlink, err, EROFS ); |
|
diag_printf("<INFO>: mount random area\n"); |
sprintf(address, "%p", (void*)(&filedata[0] + 0x100)); |
err = mount( address, "/tmp", "romfs" ); |
CHKFAIL_TYPE( mount, err, ENOENT ); |
|
err = umount( "/mnt" ); |
if( err < 0 ) SHOW_RESULT( umount, err ); |
|
err = umount( "/var" ); |
#ifdef CYGPKG_FS_RAM |
if( err < 0 ) SHOW_RESULT( umount, err ); |
#else |
CHKFAIL_TYPE( umount, err, EINVAL ); |
#endif |
|
err = umount( "/" ); |
if( err < 0 ) SHOW_RESULT( umount, err ); |
|
|
CYG_TEST_PASS_FINISH("fileio1"); |
} |
|
// ------------------------------------------------------------------------- |
// EOF fileio1.c |
/v2_0/doc/romfs.txt
0,0 → 1,12
ROMFS - A rom filesystem plug-in module for eCos |
================================================ |
|
You can use this module if you have flash ROM available to install the |
filesystem into. Instructions are given for creating and installing a |
rom filesystem into a RedBoot monitor. |
|
See mk_romfs for instructions for making the filesystem. |
|
See romfs.c for comments about the filesystem structure. |
|
|
/v2_0/doc/mk_romfs.txt
0,0 → 1,94
MK_ROMFS - Make a ROMFS image |
============================= |
|
This program creates a ROMFS image that can be read by eCos. |
|
mk_romfs - Create an eCos ROMFS disk image from the files |
contained under a specified directory |
|
Usage: ../support/mk_romfs [options] <fs_root> <fs_file> |
fs_root is the directory containing the files to package into the ROMFS image |
fs_file is the name of the ROMFS image file to create |
Options include: |
-v / -q increase / decrease verbosity |
-n do everything EXCEPT creating the output file |
-b write a big-endian image (default is little endian) |
-l collapse hard links to a single node |
|
----------- |
How to use. |
----------- |
|
For example, suppose you wish to access the following directories and files: |
/ |
/etc passwd, group |
/dev |
/mnt |
/tmp (for a RAMFS) |
/var (for a RAMFS) |
|
1. Create the required directories and files under a suitable root, eg. under |
~/rom: |
$ mkdir ~/rom |
$ cd ~/rom |
$ mkdir etc dev mnt tmp var |
$ cp /etc/passwd /etc/group etc/ |
( remembering to edit these files....;-) |
|
2. Make the romfs image in a suitable place, eg /tftpboot for direct upload to |
the RedBoot monitor. |
$ mk_romfs -v . /tftpboot/romfs.img |
mk_romfs: Verbosity 2 little endian |
Phase 1 - Build file list |
Phase 2 - Calculate space allocation |
Phase 2a - * Directories |
Phase 2b - * Regular files |
Phase 2c - * Executable files |
Phase 3 - Construct ROMFS image file (3 kb) |
Phase 3a - * Node table |
Phase 3b - * Data blocks |
/tftpboot/romfs.img completed |
|
3. Connect to your target RedBoot monitor, and load the romfs image. You will |
need to determine a suitable place in RAM to load the image into. |
$ telnet xxx.xxx.xxx.xxx 1000 |
Trying xxx.xxx.xxx.xxx... |
Connected to xxx.xxx.xxx.xxx. |
Escape character is '^]'. |
RedBoot> load romfs.img -r -v -b 0x1000000 |
Raw file loaded 0x01000000-0x0100093e |
RedBoot> |
|
4. Determine where to load the romfs image in the ROM. See what's there... |
RedBoot> fis list |
Name FLASH addr Mem addr Length Entry point |
RedBoot 0x50000000 0x50000000 0x020000 0x00000000 |
RedBoot[backup] 0x50020000 0x50020000 0x020000 0x00000000 |
RedBoot config 0x503C0000 0x503C0000 0x020000 0x00000000 |
FIS directory 0x503E0000 0x503E0000 0x020000 0x00000000 |
RedBoot> fis free |
0x50040000 .. 0x503C0000 |
RedBoot> |
We can see that a suitable place would be 0x50040000. |
Alternatively, you can let RedBoot determine the address itself... |
|
5. Copy the image from RAM to ROM... |
RedBoot> fis create -b 0x1000000 -l 0x940 RomFs |
... Erase from 0x50040000-0x50040940: . |
... Program from 0x01000000-0x01000940 at 0x50040000: . |
... Erase from 0x503e0000-0x50400000: . |
... Program from 0x01fd0000-0x01ff0000 at 0x503e0000: . |
RedBoot> fis list |
Name FLASH addr Mem addr Length Entry point |
RedBoot 0x50000000 0x50000000 0x020000 0x00000000 |
RedBoot[backup] 0x50020000 0x50020000 0x020000 0x00000000 |
RedBoot config 0x503C0000 0x503C0000 0x020000 0x00000000 |
FIS directory 0x503E0000 0x503E0000 0x020000 0x00000000 |
RomFs 0x50040000 0x01000000 0x000940 0x00000000 |
RedBoot> |
|
6. MAKE A NOTE OF THE ADDRESS IN FLASH THAT THE IMAGE IS LOADED AT. |
The ROMFS option 'CYGNUM_FS_ROM_BASE_ADDRESS' needs to be set to this |
value in order to access the filesystem. |
|
|
/v2_0/ChangeLog
0,0 → 1,106
2003-02-24 Jonathan Larmour <jifl@eCosCentric.com> |
|
* cdl/romfs.cdl: Fix doc link. |
|
2003-01-30 Andrew Lunn <andrew.lunn@ascom.ch> |
|
* cdl/romfs.cdl: Implements the CYGINT_IO_FILEIO_FS interface. |
|
2003-01-29 John Dallaway <jld@ecoscentric.com> |
|
* support/file2c.tcl: Accommodate latest Cygwin Tcl shell |
(tclsh83.exe) |
|
2002-04-15 Bart Veer <bartv@redhat.com> |
|
* support/file2c.tcl: |
Do not use an alignment attribute, since it is not honoured on |
all targets. |
|
* src/romfs.c: |
Remove alignment restrictions, since they are not actually needed |
yet and alignment is hard to guarantee on all targets. |
|
2002-01-21 Jonathan Larmour <jlarmour@redhat.com> |
|
* support/mk_romfs.c: Open image file in binary mode (for cygwin). |
Spotted by Warren Jasper. |
|
2001-11-23 Jonathan Larmour <jlarmour@redhat.com> |
|
* cdl/romfs.cdl (CYGTST_ROMFS_BUILD_TESTS): Try gcc and cc if $HOST_CC |
doesn't exist or has a problem. |
|
2001-11-22 Jesper Skov <jskov@redhat.com> |
|
* cdl/romfs.cdl: Use HOST_CC instead of 'cc'. |
|
2001-10-17 Drew Moseley <dmoseley@redhat.com> |
2001-10-17 Jonathan Larmour <jlarmour@redhat.com> |
|
* support/mk_romfs.c: Open input files in binary mode (for cygwin). |
* cdl/romfs.cdl: Work around cygwin path problems by copying files |
into build tree. |
|
2001-07-20 Jonathan Larmour <jlarmour@redhat.com> |
|
* tests/fileio1.c (main): Get this to actually pass! Remove |
kernel dependency. |
* cdl/fileio.cdl: Get CDL dependencies better. Don't use |
fixed base address. Make test building an option. Build mk_romfs |
and use it to construct a test romfs. |
* support/mk_romfs.c: fix trivial typo |
* tests/testromfs: Directory hierarchy added for constructing test |
ROMFS. |
|
2001-07-13 Richard Panton (richard.panton@3glab.com) |
|
* support/mk_romfs.c: Convert between host FS file modes and eCos |
ones. |
|
2000-10-25 Richard Panton (richard.panton@3glab.com) |
|
* cdl/romfs.cdl: |
* src/romfs.c: |
* support/mk_romfs.c: |
* tests/fileio1.c: |
A sample ROM filesystem implementation |
|
|
|
//=========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//=========================================================================== |
|
|
/v2_0/src/romfs.c
0,0 → 1,1094
//========================================================================== |
// |
// romfs.c |
// |
// ROM file system |
// |
//========================================================================== |
//####ECOSGPLCOPYRIGHTBEGIN#### |
// ------------------------------------------- |
// This file is part of eCos, the Embedded Configurable Operating System. |
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
// |
// eCos is free software; you can redistribute it and/or modify it under |
// the terms of the GNU General Public License as published by the Free |
// Software Foundation; either version 2 or (at your option) any later version. |
// |
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
// WARRANTY; without even the implied warranty of MERCHANTABILITY or |
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
// for more details. |
// |
// You should have received a copy of the GNU General Public License along |
// with eCos; if not, write to the Free Software Foundation, Inc., |
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
// |
// As a special exception, if other files instantiate templates or use macros |
// or inline functions from this file, or you compile this file and link it |
// with other works to produce a work based on this file, this file does not |
// by itself cause the resulting work to be covered by the GNU General Public |
// License. However the source code for this file must still be made available |
// in accordance with section (3) of the GNU General Public License. |
// |
// This exception does not invalidate any other reasons why a work based on |
// this file might be covered by the GNU General Public License. |
// |
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
// at http://sources.redhat.com/ecos/ecos-license/ |
// ------------------------------------------- |
//####ECOSGPLCOPYRIGHTEND#### |
//========================================================================== |
//#####DESCRIPTIONBEGIN#### |
// |
// Author(s): nickg |
// Contributors: nickg, richard.panton@3glab.com |
// Date: 2000-07-25 |
// Purpose: ROM file system |
// Description: This is a ROM filesystem for eCos. It attempts to |
// provide full POSIX-compatible filesystem behaviour |
// while at the same time being efficient in terms of |
// time and space used. |
// |
// |
//####DESCRIPTIONEND#### |
// |
//========================================================================== |
// |
// General Description |
// =================== |
// |
// This is an implementation of a ROM filesystem for eCos. Its goal is |
// to provide a working example of a filesystem that provides most of |
// the required POSIX functionality. And obviously it may also be |
// useful in its own right. |
// |
// |
// Header |
// ------ |
// |
// There is a single header that describes the overall format of the ROMFS |
// disk. The address of this header is used as the base for all offsets used |
// in the node and directory structures. It contains the following fields: |
// |
// label - A human readable label for various purposes |
// fssize - The size in bytes of the entire ROMFS disk |
// nodes - A count of the nodes in the disk |
// |
// Immediately following thisin memory is the node table, consisting of |
// 'nodes' repetitions of the node object. |
// |
// Nodes |
// ----- |
// |
// All files and directories are represented by node objects. Each |
// romfs_node structure contains the following fields: |
// |
// mode - Node type, file or directory. |
// nlink - Number of links to this node. Each directory entry that references |
// this node is a link. |
// size - Size of the data in this node in bytes. |
// ctime - Creation time of the file (NOT the ROMFS) |
// data - Offset of the first data byte for this node from the header |
// |
// Directories |
// ----------- |
// |
// A directory is a node whose data is a list of directory entries. |
// These contain the |
// following fields: |
// |
// node - Index of the node in the romfs_disk table that is referenced by |
// this entry. This is present in every directory entry fragment. |
// next - Offset of the next name entry. |
// name - The filename associated with this link to the node. |
// |
// Data Storage |
// ------------ |
// |
// Each file has its data stored in a single contiguous memory block |
// referenced by the offset in the node. |
// |
//========================================================================== |
|
#include <pkgconf/system.h> |
#include <pkgconf/hal.h> |
#include <pkgconf/kernel.h> |
#include <pkgconf/io_fileio.h> |
#include <pkgconf/fs_rom.h> |
|
#include <cyg/kernel/ktypes.h> // base kernel types |
#include <cyg/infra/cyg_trac.h> // tracing macros |
#include <cyg/infra/cyg_ass.h> // assertion macros |
|
#include <unistd.h> |
#include <sys/types.h> |
#include <fcntl.h> |
#include <sys/stat.h> |
#include <errno.h> |
#include <dirent.h> |
|
#include <stdarg.h> |
#include <stdio.h> |
#include <stdlib.h> |
#include <string.h> |
|
#include <cyg/fileio/fileio.h> |
|
#include <cyg/kernel/kapi.h> |
#include <cyg/infra/diag.h> |
|
//========================================================================== |
// Eventually we want to eXecute In Place from the ROM in a protected |
// environment, so we'll need executables to be aligned to a boundary |
// suitable for MMU protection. A suitable boundary would be the 4k |
// boundary in all the CPU architectures I am currently aware of. |
|
// Forward definitions |
|
// Filesystem operations |
static int romfs_mount ( cyg_fstab_entry *fste, cyg_mtab_entry *mte ); |
static int romfs_umount ( cyg_mtab_entry *mte ); |
static int romfs_open ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int mode, cyg_file *fte ); |
static int romfs_opendir ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
cyg_file *fte ); |
static int romfs_chdir ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
cyg_dir *dir_out ); |
static int romfs_stat ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
struct stat *buf); |
static int romfs_getinfo ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int key, void *buf, int len ); |
static int romfs_setinfo ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int key, void *buf, int len ); |
|
// File operations |
static int romfs_fo_read (struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio); |
static int romfs_fo_lseek (struct CYG_FILE_TAG *fp, off_t *pos, int whence ); |
static int romfs_fo_ioctl (struct CYG_FILE_TAG *fp, CYG_ADDRWORD com, |
CYG_ADDRWORD data); |
static int romfs_fo_fsync (struct CYG_FILE_TAG *fp, int mode ); |
static int romfs_fo_close (struct CYG_FILE_TAG *fp); |
static int romfs_fo_fstat (struct CYG_FILE_TAG *fp, struct stat *buf ); |
static int romfs_fo_getinfo (struct CYG_FILE_TAG *fp, int key, void *buf, int len ); |
static int romfs_fo_setinfo (struct CYG_FILE_TAG *fp, int key, void *buf, int len ); |
|
// Directory operations |
static int romfs_fo_dirread (struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio); |
static int romfs_fo_dirlseek (struct CYG_FILE_TAG *fp, off_t *pos, int whence ); |
|
|
//========================================================================== |
// Filesystem table entries |
|
// ------------------------------------------------------------------------- |
// Fstab entry. |
// This defines the entry in the filesystem table. |
// For simplicity we use _FILESYSTEM synchronization for all accesses since |
// we should never block in any filesystem operations. |
|
FSTAB_ENTRY( romfs_fste, "romfs", 0, |
CYG_SYNCMODE_FILE_FILESYSTEM|CYG_SYNCMODE_IO_FILESYSTEM, |
romfs_mount, |
romfs_umount, |
romfs_open, |
(cyg_fsop_unlink *)cyg_fileio_erofs, |
(cyg_fsop_mkdir *)cyg_fileio_erofs, |
(cyg_fsop_rmdir *)cyg_fileio_erofs, |
(cyg_fsop_rename *)cyg_fileio_erofs, |
(cyg_fsop_link *)cyg_fileio_erofs, |
romfs_opendir, |
romfs_chdir, |
romfs_stat, |
romfs_getinfo, |
romfs_setinfo); |
|
// ------------------------------------------------------------------------- |
// mtab entry. |
// This defines a single ROMFS loaded into ROM at the configured address |
// |
// MTAB_ENTRY( rom_mte, // structure name |
// "/rom", // mount point |
// "romfs", // FIlesystem type |
// "", // hardware device |
// (CYG_ADDRWORD) CYGNUM_FS_ROM_BASE_ADDRESS // Address in ROM |
// ); |
|
|
// ------------------------------------------------------------------------- |
// File operations. |
// This set of file operations are used for normal open files. |
|
static cyg_fileops romfs_fileops = |
{ |
romfs_fo_read, |
(cyg_fileop_write *)cyg_fileio_erofs, |
romfs_fo_lseek, |
romfs_fo_ioctl, |
cyg_fileio_seltrue, |
romfs_fo_fsync, |
romfs_fo_close, |
romfs_fo_fstat, |
romfs_fo_getinfo, |
romfs_fo_setinfo |
}; |
|
// ------------------------------------------------------------------------- |
// Directory file operations. |
// This set of operations are used for open directories. Most entries |
// point to error-returning stub functions. Only the read, lseek and |
// close entries are functional. |
|
static cyg_fileops romfs_dirops = |
{ |
romfs_fo_dirread, |
(cyg_fileop_write *)cyg_fileio_enosys, |
romfs_fo_dirlseek, |
(cyg_fileop_ioctl *)cyg_fileio_enosys, |
cyg_fileio_seltrue, |
(cyg_fileop_fsync *)cyg_fileio_enosys, |
romfs_fo_close, |
(cyg_fileop_fstat *)cyg_fileio_enosys, |
(cyg_fileop_getinfo *)cyg_fileio_enosys, |
(cyg_fileop_setinfo *)cyg_fileio_enosys |
}; |
|
//========================================================================== |
// Data typedefs |
// Some forward typedefs for the main data structures. |
|
struct romfs_disk; |
typedef struct romfs_disk romfs_disk; |
|
struct romfs_node; |
typedef struct romfs_node romfs_node; |
|
struct romfs_dirent; |
typedef struct romfs_dirent romfs_dirent; |
|
//========================================================================== |
// File and directory node |
// This data structure represents a file or directory. |
|
struct romfs_node |
{ |
cyg_uint32 mode; // 0-3 node type |
cyg_ucount32 nlink; // 4-7 number of links to this node |
cyg_uint16 uid; // 8-9 Owner id |
cyg_uint16 gid; // 10-11 Group id |
cyg_uint32 size; // 12-15 size of file in bytes |
cyg_uint32 ctime; // 16-19 creation status time |
cyg_uint32 offset; // 20-23 offset of data from start of ROMFS |
cyg_uint32 pad[2]; // 24-31 padding to align to 32byte boundary |
}; |
|
//========================================================================== |
// Directory entry. |
// Variable sized entry containing the name and node of a directory entry |
|
struct romfs_dirent |
{ |
cyg_ucount32 node; // Index of node in romfs_disk structure |
cyg_uint32 next; // Offset from start of directory of |
// a) the next entry, or |
// b) the end of the directory data |
char name[0]; // The name, NUL terminated |
}; |
|
//========================================================================== |
// ROMFS header |
// This data structure contains overall information on the ROMFS |
|
struct romfs_disk |
{ |
cyg_uint32 magic; // 0-3 Marks a valid ROMFS entry |
cyg_ucount32 nodecount; // 4-7 Count of nodes in this filesystem |
cyg_ucount32 disksize; // 8-11 Count of bytes in this filesystem |
cyg_uint32 dev_id; // 12-15 ID of disk (put into stat.st_dev) |
char name[16]; // 16-31 Name - pads to 32 bytes |
romfs_node node[0]; |
}; |
|
#define ROMFS_MAGIC 0x526f6d2e // The magic signature word for a romfs |
#define ROMFS_CIGAM 0x2e6d6f52 // The byte sex is wrong if you see this |
|
//========================================================================== |
// Directory search data |
// Parameters for a directory search. The fields of this structure are |
// updated as we follow a pathname through the directory tree. |
|
struct romfs_dirsearch |
{ |
romfs_disk *disk; // disk structure |
romfs_node *dir; // directory to search |
const char *path; // path to follow |
romfs_node *node; // Node found |
const char *name; // last name used |
int namelen; // name fragment length |
cyg_bool last; // last name in path? |
}; |
|
typedef struct romfs_dirsearch romfs_dirsearch; |
|
//========================================================================== |
// This seems to be the only string function referenced. Define as static |
// here to avoid having to load the string library |
|
static bool match( const char *a, const char *b, int len ) |
{ |
for ( ; len > 0 && *a && *b && *a == *b ; a++, b++, len-- ) |
; |
return ( len == 0 ); |
} |
|
|
//========================================================================== |
// SIMPLE buffer management. |
// Each node has a data buffer pointer and a size. |
|
// ------------------------------------------------------------------------- |
// findbuffer_node() |
// return a pointer to the data at the indicated file position. |
|
static int findbuffer_node( romfs_disk *disk, // header pointer |
romfs_node *node, // node pointer |
off_t pos, // data position to get |
cyg_uint8 **buffer, // returned buffer pointer |
size_t *size) // returned buffer size |
{ |
if ( pos >= node->size || node->size == 0 ) |
{ |
// Indicate end of data. |
*size = 0; |
} else { |
|
// Calculate the buffer position |
*buffer = (cyg_uint8*)disk + node->offset + pos; |
*size = node->size-pos; |
} |
|
return ENOERR; |
} |
|
//========================================================================== |
// Directory operations |
|
|
// ------------------------------------------------------------------------- |
// find_direntry() |
// Find a directory entry for the name and return a pointer to the first |
// entry fragment. |
|
static romfs_dirent *find_direntry( romfs_disk *disk, romfs_node *dir, const char *name, int namelen ) |
{ |
off_t pos = 0; |
int err; |
|
// Loop over all the entries until a match is found or we run out |
// of data. |
while( pos < dir->size ) |
{ |
romfs_dirent *d; |
cyg_uint8 *buf; |
size_t size; |
|
err = findbuffer_node( disk, dir, pos, &buf, &size ); |
if( err != ENOERR || size == 0) |
return NULL; |
|
d = (romfs_dirent *)buf; |
|
// Is this the directory entry we're looking for? |
if ( match( d->name, name, namelen ) ) |
return d; |
|
// Otherwise move on to next entry in chain |
pos = d->next; |
} |
|
return NULL; |
} |
|
//========================================================================== |
// Directory search |
|
// ------------------------------------------------------------------------- |
// init_dirsearch() |
// Initialize a dirsearch object to start a search |
|
static void init_dirsearch( romfs_dirsearch *ds, |
romfs_disk *disk, |
romfs_node *dir, |
const char *name) |
{ |
ds->disk = disk; |
ds->dir = dir; |
ds->path = name; |
ds->node = dir; |
ds->name = name; |
ds->namelen = 0; |
ds->last = false; |
} |
|
// ------------------------------------------------------------------------- |
// find_entry() |
// Search a single directory for the next name in a path and update the |
// dirsearch object appropriately. |
|
static int find_entry( romfs_dirsearch *ds ) |
{ |
romfs_node *dir = ds->dir; |
const char *name = ds->path; |
const char *n = name; |
int namelen = 0; |
romfs_dirent *d; |
|
// check that we really have a directory |
if( !S_ISDIR(dir->mode) ) |
return ENOTDIR; |
|
// Isolate the next element of the path name. |
while( *n != '\0' && *n != '/' ) |
n++, namelen++; |
|
// If we terminated on a NUL, set last flag. |
if( *n == '\0' ) |
ds->last = true; |
|
// update name in dirsearch object |
ds->name = name; |
ds->namelen = namelen; |
|
// Here we have the name and its length set up. |
// Search the directory for a matching entry |
|
d = find_direntry( ds->disk, dir, name, namelen ); |
|
if( d == NULL ) |
return ENOENT; |
|
// pass back the node we have found |
ds->node = &ds->disk->node[d->node]; |
|
return ENOERR; |
|
} |
|
// ------------------------------------------------------------------------- |
// romfs_find() |
// Main interface to directory search code. This is used in all file |
// level operations to locate the object named by the pathname. |
|
static int romfs_find( romfs_dirsearch *d ) |
{ |
int err; |
|
// Short circuit empty paths |
if( *(d->path) == '\0' ) |
return ENOERR; |
|
// iterate down directory tree until we find the object |
// we want. |
for(;;) |
{ |
err = find_entry( d ); |
|
if( err != ENOERR ) |
return err; |
|
if( d->last ) |
return ENOERR; |
|
// Update dirsearch object to search next directory. |
d->dir = d->node; |
d->path += d->namelen; |
if( *(d->path) == '/' ) d->path++; // skip dirname separators |
} |
} |
|
//========================================================================== |
// Pathconf support |
// This function provides support for pathconf() and fpathconf(). |
|
static int romfs_pathconf( romfs_node *node, struct cyg_pathconf_info *info ) |
{ |
int err = ENOERR; |
|
switch( info->name ) |
{ |
case _PC_LINK_MAX: |
info->value = LINK_MAX; |
break; |
|
case _PC_MAX_CANON: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
case _PC_MAX_INPUT: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
case _PC_NAME_MAX: |
info->value = NAME_MAX; |
break; |
|
case _PC_PATH_MAX: |
info->value = PATH_MAX; |
break; |
|
case _PC_PIPE_BUF: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
|
case _PC_ASYNC_IO: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
case _PC_CHOWN_RESTRICTED: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
case _PC_NO_TRUNC: |
info->value = 0; |
break; |
|
case _PC_PRIO_IO: |
info->value = 0; |
break; |
|
case _PC_SYNC_IO: |
info->value = 0; |
break; |
|
case _PC_VDISABLE: |
info->value = -1; // not supported |
err = EINVAL; |
break; |
|
default: |
err = EINVAL; |
break; |
} |
|
return err; |
} |
|
//========================================================================== |
// Filesystem operations |
|
// ------------------------------------------------------------------------- |
// romfs_mount() |
// Process a mount request. This mainly finds root for the |
// filesystem. |
|
static int romfs_mount ( cyg_fstab_entry *fste, cyg_mtab_entry *mte ) |
{ |
romfs_disk *disk; |
|
if ( !mte->data ) { |
// If the image address was not in the MTE data word, |
if ( mte->devname && mte->devname[0] ) { |
// And there's something in the 'hardware device' field, |
// then read the address from there. |
sscanf( mte->devname, "%p", (char**)&mte->data ); |
} |
} |
|
if ( !mte->data ) { |
// If still no address, try the FSTAB entry data word |
mte->data = fste->data; |
} |
|
if ( !mte->data ) { |
// If still no address, give up... |
return ENOENT; |
} |
|
disk = (romfs_disk *)mte->data; |
|
// Check the ROMFS magic number to ensure that there's really an fs. |
if ( disk->magic == ROMFS_CIGAM ) { |
// The disk image has the wrong byte sex!!! |
return EIO; |
} else if ( disk->magic != ROMFS_MAGIC || disk->nodecount == 0 ) { |
// No image found |
return ENOENT; |
} |
|
mte->root = (cyg_dir)&disk->node[0]; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_umount() |
// Unmount the filesystem. This will currently always succeed. |
|
static int romfs_umount ( cyg_mtab_entry *mte ) |
{ |
// Clear root pointer |
mte->root = CYG_DIR_NULL; |
|
// That's all folks. |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_open() |
// Open a file for reading |
|
static int romfs_open ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int mode, cyg_file *file ) |
{ |
|
romfs_dirsearch ds; |
romfs_node *node = NULL; |
int err; |
|
init_dirsearch( &ds, (romfs_disk *)mte->data, (romfs_node *)dir, name ); |
|
err = romfs_find( &ds ); |
|
if( err == ENOENT ) |
{ |
return ENOENT; |
} |
else if( err == ENOERR ) |
{ |
// The node exists. If the O_CREAT and O_EXCL bits are set, we |
// must fail the open. |
|
if( (mode & (O_CREAT|O_EXCL)) == (O_CREAT|O_EXCL) ) |
err = EEXIST; |
else node = ds.node; |
} |
|
if( err == ENOERR && (mode & O_TRUNC ) ) |
{ |
// If the O_TRUNC bit is set we must fail the open |
|
err = EPERM; |
} |
|
if( err != ENOERR ) return err; |
|
// Check that we actually have a file here |
if( S_ISDIR(node->mode) ) return EISDIR; |
|
// Initialize the file object |
|
file->f_flag |= mode & CYG_FILE_MODE_MASK; |
file->f_type = CYG_FILE_TYPE_FILE; |
file->f_ops = &romfs_fileops; |
file->f_offset = 0; |
file->f_data = (CYG_ADDRWORD)node; |
file->f_xops = 0; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_opendir() |
// Open a directory for reading. |
|
static int romfs_opendir ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
cyg_file *file ) |
{ |
romfs_dirsearch ds; |
int err; |
|
init_dirsearch( &ds, (romfs_disk *)mte->data, (romfs_node *)dir, name ); |
|
err = romfs_find( &ds ); |
|
if( err != ENOERR ) return err; |
|
// check it is really a directory. |
if( !S_ISDIR(ds.node->mode) ) return ENOTDIR; |
|
// Initialize the file object, setting the f_ops field to a |
// special set of file ops. |
|
file->f_type = CYG_FILE_TYPE_FILE; |
file->f_ops = &romfs_dirops; |
file->f_offset = 0; |
file->f_data = (CYG_ADDRWORD)ds.node; |
file->f_xops = 0; |
|
return ENOERR; |
|
} |
|
// ------------------------------------------------------------------------- |
// romfs_chdir() |
// Change directory support. |
|
static int romfs_chdir ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
cyg_dir *dir_out ) |
{ |
if( dir_out != NULL ) |
{ |
// This is a request to get a new directory pointer in |
// *dir_out. |
|
romfs_dirsearch ds; |
int err; |
|
init_dirsearch( &ds, (romfs_disk *)mte->data, (romfs_node *)dir, name ); |
|
err = romfs_find( &ds ); |
|
if( err != ENOERR ) return err; |
|
// check it is a directory |
if( !S_ISDIR(ds.node->mode) ) |
return ENOTDIR; |
|
// Pass it out |
*dir_out = (cyg_dir)ds.node; |
} |
// If no output dir is required, this means that the mte and |
// dir arguments are the current cdir setting and we should |
// forget this fact. Do nothing in ROMFS. |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_stat() |
// Get struct stat info for named object. |
|
static int romfs_stat ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
struct stat *buf) |
{ |
romfs_dirsearch ds; |
int err; |
romfs_disk *disk = (romfs_disk *)mte->data; |
|
init_dirsearch( &ds, disk, (romfs_node *)dir, name ); |
|
err = romfs_find( &ds ); |
|
if( err != ENOERR ) return err; |
|
// Fill in the status |
buf->st_mode = ds.node->mode; |
buf->st_ino = (ino_t)(ds.node - &disk->node[0]); |
buf->st_dev = (dev_t)disk->dev_id; |
buf->st_nlink = ds.node->nlink; |
buf->st_uid = ds.node->uid; |
buf->st_gid = ds.node->gid; |
buf->st_size = ds.node->size; |
buf->st_atime = ds.node->ctime; |
buf->st_mtime = ds.node->ctime; |
buf->st_ctime = ds.node->ctime; |
|
return err; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_getinfo() |
// Getinfo. Currently only support pathconf(). |
|
static int romfs_getinfo ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int key, void *buf, int len ) |
{ |
romfs_dirsearch ds; |
int err; |
|
init_dirsearch( &ds, (romfs_disk *)mte->data, (romfs_node *)dir, name ); |
|
err = romfs_find( &ds ); |
|
if( err != ENOERR ) return err; |
|
switch( key ) |
{ |
case FS_INFO_CONF: |
err = romfs_pathconf( ds.node, (struct cyg_pathconf_info *)buf ); |
break; |
|
default: |
err = EINVAL; |
} |
return err; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_setinfo() |
// Setinfo. Nothing to support here at present. |
|
static int romfs_setinfo ( cyg_mtab_entry *mte, cyg_dir dir, const char *name, |
int key, void *buf, int len ) |
{ |
// No setinfo keys supported at present |
|
return EINVAL; |
} |
|
|
//========================================================================== |
// File operations |
|
// ------------------------------------------------------------------------- |
// romfs_fo_read() |
// Read data from the file. |
|
static int romfs_fo_read (struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio) |
{ |
romfs_node *node = (romfs_node *)fp->f_data; |
int i; |
off_t pos = fp->f_offset; |
ssize_t resid = uio->uio_resid; |
|
// Loop over the io vectors until there are none left |
for( i = 0; i < uio->uio_iovcnt; i++ ) |
{ |
cyg_iovec *iov = &uio->uio_iov[i]; |
char *buf = (char *)iov->iov_base; |
off_t len = iov->iov_len; |
|
// Loop over each vector filling it with data from the file. |
while( len > 0 && pos < node->size ) |
{ |
cyg_uint8 *fbuf; |
size_t bsize; |
off_t l = len; |
int err; |
|
// Get a pointer to the data at offset _pos_. |
err = findbuffer_node( (romfs_disk *)fp->f_mte->data, node, pos, &fbuf, &bsize ); |
|
if( err != ENOERR ) |
return err; |
|
// adjust size to end of file if necessary |
if( l > node->size-pos ) |
l = node->size-pos; |
|
// adjust size to the amount of contiguous data we can see |
// at present. |
if( l > bsize ) |
l = bsize; |
|
// copy data out |
memcpy( buf, fbuf, l ); |
|
// Update working vars |
len -= l; |
buf += l; |
pos += l; |
resid -= l; |
} |
} |
|
// We successfully read some data |
// Update the file offset and transfer residue. |
|
uio->uio_resid = resid; |
fp->f_offset = pos; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_lseek() |
// Seek to a new file position. |
|
static int romfs_fo_lseek (struct CYG_FILE_TAG *fp, off_t *apos, int whence ) |
{ |
romfs_node *node = (romfs_node *)fp->f_data; |
off_t pos = *apos; |
|
switch( whence ) |
{ |
case SEEK_SET: |
// Pos is already where we want to be. |
break; |
|
case SEEK_CUR: |
// Add pos to current offset. |
pos += fp->f_offset; |
break; |
|
case SEEK_END: |
// Add pos to file size. |
pos += node->size; |
break; |
|
default: |
return EINVAL; |
} |
|
// Check that pos is still within current file size, or at the |
// very end. |
if( pos < 0 || pos > node->size ) |
return EINVAL; |
|
// All OK, set fp offset and return new position. |
*apos = fp->f_offset = pos; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_ioctl() |
// Handle ioctls. Currently none are defined. |
|
static int romfs_fo_ioctl (struct CYG_FILE_TAG *fp, CYG_ADDRWORD com, |
CYG_ADDRWORD data) |
{ |
// No Ioctls currenly defined. |
|
return EINVAL; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_fsync(). |
// Force the file out to data storage. |
|
static int romfs_fo_fsync (struct CYG_FILE_TAG *fp, int mode ) |
{ |
// Data is always permanently where it belongs, nothing to do |
// here. |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_close() |
// Close a file. We just clear out the data pointer. |
|
static int romfs_fo_close (struct CYG_FILE_TAG *fp) |
{ |
fp->f_data = 0; // zero data pointer |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
//romfs_fo_fstat() |
// Get file status. |
|
static int romfs_fo_fstat (struct CYG_FILE_TAG *fp, struct stat *buf ) |
{ |
romfs_node *node = (romfs_node *)fp->f_data; |
romfs_disk *disk = (romfs_disk*)(fp->f_mte->data); |
|
// Fill in the status |
buf->st_mode = node->mode; |
buf->st_ino = (ino_t)(node - &disk->node[0]); |
buf->st_dev = disk->dev_id; |
buf->st_nlink = node->nlink; |
buf->st_uid = node->uid; |
buf->st_gid = node->gid; |
buf->st_size = node->size; |
buf->st_atime = node->ctime; |
buf->st_mtime = node->ctime; |
buf->st_ctime = node->ctime; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_getinfo() |
// Get info. Currently only supports fpathconf(). |
|
static int romfs_fo_getinfo (struct CYG_FILE_TAG *fp, int key, void *buf, int len ) |
{ |
romfs_node *node = (romfs_node *)fp->f_data; |
int err; |
|
switch( key ) |
{ |
case FS_INFO_CONF: |
err = romfs_pathconf( node, (struct cyg_pathconf_info *)buf ); |
break; |
|
default: |
err = EINVAL; |
} |
return err; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_setinfo() |
// Set info. Nothing supported here. |
|
static int romfs_fo_setinfo (struct CYG_FILE_TAG *fp, int key, void *buf, int len ) |
{ |
// No setinfo key supported at present |
|
return ENOERR; |
} |
|
|
//========================================================================== |
// Directory operations |
|
// ------------------------------------------------------------------------- |
// romfs_fo_dirread() |
// Read a single directory entry from a file. |
|
static int romfs_fo_dirread (struct CYG_FILE_TAG *fp, struct CYG_UIO_TAG *uio) |
{ |
romfs_node *dir = (romfs_node *)fp->f_data; |
off_t pos = fp->f_offset; |
int err = ENOERR; |
struct dirent *ent = (struct dirent *)uio->uio_iov[0].iov_base; |
char *nbuf = ent->d_name; |
int nlen = sizeof(ent->d_name)-1; |
off_t len = uio->uio_iov[0].iov_len; |
romfs_dirent *d = NULL; |
cyg_uint8 *buf; |
size_t size; |
int i; |
|
if( len < sizeof(struct dirent) ) |
return EINVAL; |
|
// Get the next entry |
err = findbuffer_node( (romfs_disk *)fp->f_mte->data, dir, pos, &buf, &size ); |
if( err != ENOERR || size == 0 || pos >= dir->size ) |
return err; |
|
d = (romfs_dirent *)buf; |
|
for ( i = 0 ; i < nlen && d->name[i] ; i++, nbuf++ ) |
*nbuf = d->name[i]; |
|
// A successful read. Terminate the entry name with a NUL, set the |
// residue and set the file offset to restart at the next |
// directory entry. |
|
*nbuf = '\0'; |
uio->uio_resid -= sizeof(struct dirent); |
fp->f_offset = d->next; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// romfs_fo_dirlseek() |
// Seek directory to start. |
|
static int romfs_fo_dirlseek (struct CYG_FILE_TAG *fp, off_t *pos, int whence ) |
{ |
// Only allow SEEK_SET to zero |
|
if( whence != SEEK_SET || *pos != 0) |
return EINVAL; |
|
*pos = fp->f_offset = 0; |
|
return ENOERR; |
} |
|
// ------------------------------------------------------------------------- |
// EOF romfs.c |
/v2_0/support/file2c.tcl
0,0 → 1,124
#!/bin/bash |
# restart using a Tcl shell \ |
exec sh -c 'for tclshell in tclsh tclsh83 cygtclsh80 ; do \ |
( echo | $tclshell ) 2> /dev/null && exec $tclshell "`( cygpath -w \"$0\" ) 2> /dev/null || echo $0`" "$@" ; \ |
done ; \ |
echo "file2c.tcl: cannot find Tcl shell" ; exit 1' "$0" "$@" |
|
#=============================================================================== |
# |
# file2c.tcl |
# |
# Convert a file into a header that can be #included from C. |
# |
#=============================================================================== |
#####ECOSGPLCOPYRIGHTBEGIN#### |
## ------------------------------------------- |
## This file is part of eCos, the Embedded Configurable Operating System. |
## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. |
## |
## eCos is free software; you can redistribute it and/or modify it under |
## the terms of the GNU General Public License as published by the Free |
## Software Foundation; either version 2 or (at your option) any later version. |
## |
## eCos is distributed in the hope that it will be useful, but WITHOUT ANY |
## WARRANTY; without even the implied warranty of MERCHANTABILITY or |
## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
## for more details. |
## |
## You should have received a copy of the GNU General Public License along |
## with eCos; if not, write to the Free Software Foundation, Inc., |
## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. |
## |
## As a special exception, if other files instantiate templates or use macros |
## or inline functions from this file, or you compile this file and link it |
## with other works to produce a work based on this file, this file does not |
## by itself cause the resulting work to be covered by the GNU General Public |
## License. However the source code for this file must still be made available |
## in accordance with section (3) of the GNU General Public License. |
## |
## This exception does not invalidate any other reasons why a work based on |
## this file might be covered by the GNU General Public License. |
## |
## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. |
## at http://sources.redhat.com/ecos/ecos-license/ |
## ------------------------------------------- |
#####ECOSGPLCOPYRIGHTEND#### |
#=============================================================================== |
######DESCRIPTIONBEGIN#### |
# |
# Author(s): jlarmour,bartv |
# Contact(s): |
# Date: 2001-07-20 |
# Purpose: |
# Description: |
# Usage: file2c.tcl <file to encode> <output C header file> |
# |
#####DESCRIPTIONEND#### |
#=============================================================================== |
|
|
|
if { $argc != 2 } { |
puts "Usage: file2c.tcl <file to encode> <output C header file>" |
exit 1 |
} |
set infile [lindex $argv 0] |
set outfile [lindex $argv 1] |
|
set status [ catch { |
set infilefd [open $infile "r"] |
fconfigure $infilefd -translation binary |
set data [read $infilefd] |
close $infilefd |
} message] |
|
if { $status != 0 } { |
error "Unable to read file $infile: $message" |
} |
|
set result "" |
|
set status [ catch { |
set outfilefd [ open $outfile "w" ] |
} message ] |
|
if { $status != 0 } { |
error "Unable to create file $outfile: $message" |
} |
|
append result "/* This is a generated file. Do not edit. */\n\n" |
append result "static const unsigned char filedata\[\] = {\n" |
|
set datalength [ string length $data ] |
|
set aligned_datalength [expr $datalength - ($datalength % 8)] |
|
for { set i 0 } {$i < $aligned_datalength} {incr i 8} { |
binary scan $data "@[set i]H16" var0 |
append result [format " 0x%2s, 0x%2s, 0x%2s, 0x%2s, 0x%2s, 0x%2s, 0x%2s, 0x%2s,\n" \ |
[string range $var0 0 1] \ |
[string range $var0 2 3] \ |
[string range $var0 4 5] \ |
[string range $var0 6 7] \ |
[string range $var0 8 9] \ |
[string range $var0 10 11] \ |
[string range $var0 12 13] \ |
[string range $var0 14 15]] |
} |
|
if { $aligned_datalength != $datalength } { |
append result " " |
for { set i $aligned_datalength } {$i < $datalength} {incr i} { |
binary scan $data "@[set i]H2" var0 |
append result [format "0x%2s, " $var0] |
} |
} |
|
# Remove either comma+newline or comma+space from the end |
set result [string range $result 0 [expr [string length $result] - 3]] |
|
append result "\n};" |
|
puts $outfilefd $result |
close $outfilefd |
v2_0/support/file2c.tcl
Property changes :
Added: svn:executable
## -0,0 +1 ##
+*
\ No newline at end of property
Index: v2_0/support/Makefile
===================================================================
--- v2_0/support/Makefile (nonexistent)
+++ v2_0/support/Makefile (revision 1765)
@@ -0,0 +1,39 @@
+#==========================================================================
+#####ECOSGPLCOPYRIGHTBEGIN####
+## -------------------------------------------
+## This file is part of eCos, the Embedded Configurable Operating System.
+## Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+##
+## eCos is free software; you can redistribute it and/or modify it under
+## the terms of the GNU General Public License as published by the Free
+## Software Foundation; either version 2 or (at your option) any later version.
+##
+## eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+## WARRANTY; without even the implied warranty of MERCHANTABILITY or
+## FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+## for more details.
+##
+## You should have received a copy of the GNU General Public License along
+## with eCos; if not, write to the Free Software Foundation, Inc.,
+## 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+##
+## As a special exception, if other files instantiate templates or use macros
+## or inline functions from this file, or you compile this file and link it
+## with other works to produce a work based on this file, this file does not
+## by itself cause the resulting work to be covered by the GNU General Public
+## License. However the source code for this file must still be made available
+## in accordance with section (3) of the GNU General Public License.
+##
+## This exception does not invalidate any other reasons why a work based on
+## this file might be covered by the GNU General Public License.
+##
+## Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+## at http://sources.redhat.com/ecos/ecos-license/
+## -------------------------------------------
+#####ECOSGPLCOPYRIGHTEND####
+#==========================================================================
+
+CC = gcc
+CFLAGS = -ggdb -Wall
+
+mk_romfs:
Index: v2_0/support/mk_romfs.c
===================================================================
--- v2_0/support/mk_romfs.c (nonexistent)
+++ v2_0/support/mk_romfs.c (revision 1765)
@@ -0,0 +1,734 @@
+//==========================================================================
+//
+// mk_romfs.c
+//
+// Create ROM file system image
+//
+//==========================================================================
+//####ECOSGPLCOPYRIGHTBEGIN####
+// -------------------------------------------
+// This file is part of eCos, the Embedded Configurable Operating System.
+// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
+//
+// eCos is free software; you can redistribute it and/or modify it under
+// the terms of the GNU General Public License as published by the Free
+// Software Foundation; either version 2 or (at your option) any later version.
+//
+// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
+// WARRANTY; without even the implied warranty of MERCHANTABILITY or
+// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+// for more details.
+//
+// You should have received a copy of the GNU General Public License along
+// with eCos; if not, write to the Free Software Foundation, Inc.,
+// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+//
+// As a special exception, if other files instantiate templates or use macros
+// or inline functions from this file, or you compile this file and link it
+// with other works to produce a work based on this file, this file does not
+// by itself cause the resulting work to be covered by the GNU General Public
+// License. However the source code for this file must still be made available
+// in accordance with section (3) of the GNU General Public License.
+//
+// This exception does not invalidate any other reasons why a work based on
+// this file might be covered by the GNU General Public License.
+//
+// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
+// at http://sources.redhat.com/ecos/ecos-license/
+// -------------------------------------------
+//####ECOSGPLCOPYRIGHTEND####
+//==========================================================================
+//#####DESCRIPTIONBEGIN####
+//
+// Author(s): richard.panton@3glab.com
+// Contributors: richard.panton@3glab.com
+// Date: 2000-07-25
+// Purpose: ROM file system
+// Description: This program creates a ROM file system image, suitable
+// for use with the sample ROM file system implemented by
+// this package.
+// * CAUTION! * This is host code and can only be built
+// in a host, e.g. Linux, environment.
+//
+//####DESCRIPTIONEND####
+//==========================================================================
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+//==========================================================================
+//
+// CONFIGURABLE ITEMS HERE
+//
+//==========================================================================
+
+// define LONG to be a four byte unsigned integer on the host
+#define LONG unsigned long
+
+// define SHORT to be a two byte unsigned integer on the host
+#define SHORT unsigned short
+
+// All data files should be aligned to this sized boundary (minimum probably 32)
+#define DATA_ALIGN 32
+
+// The data stored in a directory should be aligned to this size boundary
+#define DIRECTORY_ALIGN 32
+
+// All executable files should be aligned to this sized boundary (minimum probably 32)
+#define EXEC_ALIGN 32
+
+// Undefine this if the host filesystem does not support lstat()
+#define HAS_LSTAT
+
+//==========================================================================
+
+// Return (n) aligned to the next (b) byte boundary
+#define ALIGN_TO( n, b ) (( (n) + (b)-1 ) & ~((b)-1))
+
+// Set the stat call to use
+#ifdef HAS_LSTAT
+#define get_status( p, b ) lstat( (p), (b) )
+#else
+#define get_status( p, b ) stat( (p), (b) )
+#endif
+
+// This is how we identify a directory from its mode
+#define IS_DIRECTORY( m ) (S_ISDIR(m))
+
+// This is how we identify a data file from its mode
+#define IS_DATAFILE( m ) (S_ISREG(m) && ((m)&S_IXUSR) == 0 )
+
+// This is how we identify an executable from its mode
+#define IS_EXECUTABLE( m ) (S_ISREG(m) && ((m)&S_IXUSR) != 0 )
+
+// This is how we identify a symbolic link from its mode
+#define IS_SYMLINK( m ) (S_ISLNK(m))
+
+#define ROMFS_MAGIC 0x526f6d2e
+
+//=========================================================================
+// EXIT CODES
+#define EXIT_SUCCESS 0
+#define EXIT_ARGS 1
+#define EXIT_MALLOC 2
+#define EXIT_FILESYS 3
+#define EXIT_WRITE 4
+#define EXIT_SEEK 5
+#define EXIT_COMPILE 6
+#define EXIT_BUG 7
+
+
+
+// These are the structures we will build into the ROMFS image.
+// The sizes of these structures should be fixed for all architectures
+typedef struct romfs_dirent {
+ LONG node; // 4
+ LONG next; // 8
+ char name[0]; // 8 + strlen(name) + 1
+} romfs_dirent; // Aligns to next 32 byte boundary
+
+typedef struct romfs_node {
+ LONG mode; // 4
+ LONG nlink; // 8
+ SHORT uid; // 10
+ SHORT gid; // 12
+ LONG size; // 16
+ LONG ctime; // 20
+ LONG data_offset; // 24
+ char pad[8]; // 32
+} romfs_node; // Next node begins here
+
+typedef struct romfs_disk {
+ LONG magic; // 4
+ LONG nodecount; // 8
+ LONG disksize; // 12
+ LONG dev_id; // 16
+ char name[16]; // 32
+} romfs_disk; // Nodes start here
+
+// This is the holding structure for a node
+typedef struct node {
+ const char *path; // Filename (inc. path) of a link to this node
+ size_t size; // Size of file/directory/link
+ mode_t st_mode; // Type and permissions
+ uid_t uid; // Owner id
+ gid_t gid; // Group id
+ time_t ctime; // File creation time
+ int nodenum; // Nodenumber of this node in the ROMFS image
+ dev_t device; // Device (for hardlink check)
+ ino_t inode; // Inode (for hardlink check)
+ int nlink; // [DIRECTORIES] Number of sub-directories [FILES] hard links
+ romfs_dirent *entry; // [DIRECTORIES] Points to an array of directory entries
+ int entry_size; // Size to be allocated to file (includes alignment bytes)
+ unsigned long offset; // Offset within ROMFS image of data
+ struct node *sibling; // Points to the next entry in this directory
+ struct node *child; // [DIRECTORIES] Points to any subdirectories
+ struct node *next_in_rom; // Next in ROMFS write order
+ struct node *next_multilink;// Next node that is multilinked
+} node;
+
+static int nodes = 0;
+static char *prog;
+static int verbose = 1;
+static int dowrite = 1;
+static int bigendian = 0;
+static int hardlinks = 0;
+static unsigned long coffset = 0;
+static node * first = NULL;
+static node ** last_p = &first;
+static node * first_multilink = NULL;
+static node ** last_multilink_p = &first_multilink;
+static int fd = -1;
+
+#define VERB_NONE 0
+#define VERB_MINIMUM 1
+#define VERB_SUB 2
+#define VERB_MAX 3
+#define VERB_EXCESSIVE 4
+
+// Use gcc format argument checking on this function, which cannot return
+static void fatal_error( int exitcode, const char *fmt, ... ) \
+ __attribute__ (( noreturn,format (printf, 2, 3) ));
+
+// Use gcc format argument checking on this function
+static void verb_printf( int level, const char *fmt, ... ) \
+ __attribute__ ((format (printf, 2, 3) ));
+
+static void fatal_error( int exitcode, const char *fmt, ... ) {
+ va_list v;
+
+ va_start( v, fmt );
+ vfprintf( stderr, fmt, v );
+
+ exit(exitcode);
+}
+
+static void verb_printf( int level, const char *fmt, ... ){
+ if ( level <= verbose ) {
+ va_list v;
+ va_start( v,fmt );
+ vprintf(fmt, v);
+ }
+}
+
+static void *mymalloc( size_t size ) {
+ void *p = malloc(size);
+ if ( !p ) {
+ fatal_error( EXIT_MALLOC, "Out of memory allocating %d bytes\n", size );
+ }
+ return p;
+}
+
+static void myrealloc( void **o, size_t newsize ) {
+ if ( *o == NULL )
+ *o = mymalloc( newsize );
+ else if ( !(*o = realloc( *o, newsize )) ) {
+ fatal_error( EXIT_MALLOC, "Out of memory re-allocating %d bytes\n", newsize );
+ }
+}
+
+static void outputlong( unsigned char *b, unsigned long w ) {
+ if ( bigendian ) {
+ b[0] = (w>>24) & 0xff;
+ b[1] = (w>>16) & 0xff;
+ b[2] = (w>> 8) & 0xff;
+ b[3] = (w ) & 0xff;
+ } else {
+ b[3] = (w>>24) & 0xff;
+ b[2] = (w>>16) & 0xff;
+ b[1] = (w>> 8) & 0xff;
+ b[0] = (w ) & 0xff;
+ }
+}
+
+static void outputshort( unsigned char *b, unsigned short w ) {
+ if ( bigendian ) {
+ b[0] = (w>> 8) & 0xff;
+ b[1] = (w ) & 0xff;
+ } else {
+ b[1] = (w>> 8) & 0xff;
+ b[0] = (w ) & 0xff;
+ }
+}
+
+static unsigned long ConvertMode( unsigned long posix_mode ) {
+ unsigned long result = 0;
+ if ( S_ISDIR( posix_mode ) ) result |= 1<<0;
+ if ( S_ISCHR( posix_mode ) ) result |= 1<<1;
+ if ( S_ISBLK( posix_mode ) ) result |= 1<<2;
+ if ( S_ISREG( posix_mode ) ) result |= 1<<3;
+ if ( S_ISFIFO(posix_mode ) ) result |= 1<<4;
+ // We cannot create MQ, SEM, or SHM entries here
+ if ( posix_mode & S_IRUSR ) result |= 1<<8;
+ if ( posix_mode & S_IWUSR ) result |= 1<<9;
+ if ( posix_mode & S_IXUSR ) result |= 1<<10;
+ if ( posix_mode & S_IRGRP ) result |= 1<<11;
+ if ( posix_mode & S_IWGRP ) result |= 1<<12;
+ if ( posix_mode & S_IXGRP ) result |= 1<<13;
+ if ( posix_mode & S_IROTH ) result |= 1<<14;
+ if ( posix_mode & S_IWOTH ) result |= 1<<15;
+ if ( posix_mode & S_IXOTH ) result |= 1<<16;
+ if ( posix_mode & S_ISUID ) result |= 1<<17;
+ if ( posix_mode & S_ISGID ) result |= 1<<18;
+ return result;
+}
+
+static const char *AddDirEntry( const char *name, node *parent_node, int node_num ) {
+ int this_size = ((strlen(name) + 4 + 4 + 1) + 31) & ~31;
+ int start = parent_node->size;
+ romfs_dirent *g;
+ myrealloc( (void**)&parent_node->entry, (parent_node->size += this_size) );
+ g = (romfs_dirent *)((unsigned char *)parent_node->entry + start);
+ memset( (void*)g, '\0', this_size );
+ outputlong( (char*)&g->node, node_num);
+ outputlong( (char*)&g->next, parent_node->size);
+ strcpy(g->name,name);
+ verb_printf( VERB_MAX, "\t%s --> node %d\n", name, node_num );
+ return (const char *)g->name;
+}
+
+extern int errno;
+
+static node * FindLink( dev_t d, ino_t i ) {
+ // See if the node has been previously included by checking the device/inode
+ // combinations of all known multi-linked nodes
+ node *np = first_multilink;
+
+ for ( ; np ; np = np->next_multilink ) {
+ if ( np->device == d && np->inode == i )
+ return np;
+ }
+ return NULL;
+}
+
+static node * GetNodeInfo( const char *path, const char *name, int *hlink ) {
+ char newpath[1024];
+ node *node, *lnode;
+ struct stat stbuff;
+
+ sprintf(newpath,"%s/%s",path,name);
+ if ( (get_status(newpath,&stbuff)) < 0 ) {
+ fatal_error(EXIT_FILESYS, "stat(%s) failed: %s\n", newpath, strerror(errno));
+ }
+ if ( !(stbuff.st_mode & S_IRUSR) ) {
+ fatal_error(EXIT_FILESYS, "\"%s\" is not readable\n", newpath );
+ }
+ if ( hardlinks && S_ISREG( stbuff.st_mode ) && stbuff.st_nlink > 1 ) {
+
+ // See if this node has already been loaded
+ lnode = FindLink( stbuff.st_dev, stbuff.st_ino );
+
+ if ( lnode ) {
+ lnode->nlink++;
+ *hlink = 1;
+ return lnode; // Return the found link instead
+ }
+
+ // Create a new node
+ node = mymalloc( sizeof(struct node) );
+
+ // Incorporate the new link into the 'multi-linked' node list
+ *last_multilink_p = node;
+ last_multilink_p = &node->next_multilink;
+ } else {
+ // Create a new node
+ node = mymalloc( sizeof(struct node) );
+ }
+ node->path = strdup( newpath );
+ // We re-calculate the size for directories
+ node->size = IS_DIRECTORY( stbuff.st_mode ) ? 0 : stbuff.st_size;
+ node->st_mode = stbuff.st_mode;
+ node->uid = stbuff.st_uid;
+ node->gid = stbuff.st_gid;
+ node->ctime = stbuff.st_ctime;
+ node->nodenum = nodes++;
+ node->device = stbuff.st_dev;
+ node->inode = stbuff.st_ino;
+ // We always re-calculate the number of links
+ node->nlink = IS_DIRECTORY( stbuff.st_mode ) ? 2 : 1;
+ node->entry = NULL;
+ node->entry_size = 0;
+ node->offset = 0;
+ node->sibling = NULL;
+ node->child = NULL;
+ node->next_in_rom = NULL;
+ node->next_multilink = NULL;
+ *hlink = 0;
+ return node;
+}
+
+static void ScanDirectory(node *mynode, int p_node) {
+
+ DIR *dh;
+ struct dirent *e;
+ node **last_p = &mynode->child;
+ node *th;
+ int was_hardlinked;
+
+ if ( (dh = opendir( mynode->path )) == NULL ) {
+ perror(mynode->path);
+ return;
+ }
+
+ verb_printf(VERB_EXCESSIVE, "Construct directory '%s'(%d):\n",
+ mynode->path, mynode->nodenum );
+
+ // Add . & .. here because they MUST be present in the image
+ AddDirEntry( ".", mynode, mynode->nodenum );
+ AddDirEntry( "..", mynode, p_node );
+
+ while ( (e = readdir( dh )) ) {
+ // Ignore . & .. here because they MAY NOT be in the host filesystem
+ if ( strcmp(e->d_name,".") && strcmp(e->d_name,"..") ) {
+
+
+ th = GetNodeInfo( mynode->path, e->d_name, &was_hardlinked );
+ AddDirEntry( e->d_name, mynode, th->nodenum );
+
+ if ( !was_hardlinked ) {
+ verb_printf( VERB_EXCESSIVE, "\t\tNew node %d for entry '%s'\n", th->nodenum, e->d_name);
+ *last_p = th;
+ last_p = &th->sibling;
+ } else {
+ verb_printf( VERB_EXCESSIVE, "\t\tRe-used node %d for entry '%s'\n", th->nodenum, e->d_name);
+ }
+ }
+ }
+ closedir( dh );
+ verb_printf(VERB_EXCESSIVE,"Completed '%s'. Checking for child directories...\n", mynode->path);
+
+ for ( th = mynode->child ; th ; th = th->sibling ) {
+ if ( IS_DIRECTORY( th->st_mode ) ) {
+ mynode->nlink++;
+ ScanDirectory( th, mynode->nodenum );
+ }
+ }
+}
+
+static void AllocateSpaceToDirectories( node *first ) {
+ node *np;
+
+ for ( np = first ; np ; np = np->sibling ) {
+ if ( IS_DIRECTORY( np->st_mode ) ) {
+ // The first node is a directory. Add its data
+ np->offset = coffset;
+ np->entry_size = ALIGN_TO( np->size, DIRECTORY_ALIGN );
+ coffset += np->entry_size;
+
+ verb_printf( VERB_MAX, "\t\tnode %5d : 0x%06lX (+0x%05X)\n",
+ np->nodenum, np->offset, np->entry_size );
+
+ // Link this node into the write order chain.
+ // For node 0 (the root), this will overwrite the first pointer with itself
+ *last_p = np;
+ last_p = &np->next_in_rom;
+ }
+ }
+
+ // Now add any child directories
+ for ( np = first ; np ; np = np->sibling ) {
+ if ( IS_DIRECTORY( np->st_mode ) && np->child )
+ AllocateSpaceToDirectories( np->child );
+ }
+}
+
+static void AllocateSpaceToDataFiles( node *first ) {
+ node *np;
+
+ // There are two loops below. It CAN be done in just one, but this re-orders
+ // the file positions in relation to their inode numbers. To keep it simple
+ // to check, allocation takes place in the first loop, recursion in the second
+
+ // Search for child data files
+ for ( np = first->child ; np ; np = np->sibling ) {
+ if ( IS_DATAFILE( np->st_mode ) || IS_SYMLINK( np->st_mode ) ) {
+ np->offset = coffset;
+ np->entry_size = ALIGN_TO( np->size, DATA_ALIGN );
+ coffset += np->entry_size;
+
+ // Link in to the rom write order list
+ *last_p = np;
+ last_p = &np->next_in_rom;
+
+ verb_printf( VERB_MAX, "\t\tnode %5d : 0x%06lX (+0x%05X)\n",
+ np->nodenum, np->offset, np->entry_size );
+ }
+ }
+
+ // Recurse into sub-directories
+ for ( np = first->child ; np ; np = np->sibling ) {
+ if ( IS_DIRECTORY( np->st_mode ) ) {
+ AllocateSpaceToDataFiles( np );
+ }
+ }
+}
+
+static void AllocateSpaceToExecutables( node *first ) {
+ node *np;
+
+ // The first node is a directory. Don't bother with that...
+
+ // Search for child executables
+ for ( np = first->child ; np ; np = np->sibling ) {
+ if ( IS_EXECUTABLE( np->st_mode ) ) {
+ np->offset = coffset;
+ np->entry_size = ALIGN_TO( np->size, EXEC_ALIGN );
+ coffset += np->entry_size;
+
+ // Link in to the rom write order list
+ *last_p = np;
+ last_p = &np->next_in_rom;
+
+ verb_printf( VERB_MAX, "\t\tnode %5d : 0x%06lX (+0x%05X)\n",
+ np->nodenum, np->offset, np->entry_size );
+ }
+ }
+
+ // Recurse into sub-directories
+ for ( np = first->child ; np ; np = np->sibling ) {
+ if ( IS_DIRECTORY( np->st_mode ) ) {
+ AllocateSpaceToExecutables( np );
+ }
+ }
+}
+
+static void WriteNode( int fd, node *np ) {
+ romfs_node anode;
+ char padhere[9];
+ outputlong( (char*) &anode.mode, ConvertMode( np->st_mode ) );
+ outputlong( (char*) &anode.nlink, np->nlink );
+ outputshort((char*) &anode.uid, np->uid );
+ outputshort((char*) &anode.gid, np->gid );
+ outputlong( (char*) &anode.size, np->size );
+ outputlong( (char*) &anode.ctime, np->ctime );
+ outputlong( (char*) &anode.data_offset, np->offset );
+ sprintf( padhere, "<%6d>", np->nodenum );
+ memcpy( anode.pad, padhere, 8 );
+ if ( dowrite && write( fd, (void*)&anode, sizeof(anode) ) != sizeof(anode) )
+ fatal_error(EXIT_WRITE, "Error writing node %d (%s): %s\n", np->nodenum, np->path, strerror(errno) );
+}
+
+static int WriteNodeAndSiblings( int fd, int nodenum, node *first ) {
+ node *np;
+
+ for ( np = first ; np ; np = np->sibling ) {
+ if ( np->nodenum != nodenum++ ) {
+ fatal_error(EXIT_BUG, "BUG: Out of sequence node number; got %d, expected %d\n", np->nodenum, nodenum-1);
+ }
+ WriteNode( fd, np );
+ }
+
+ for ( np = first ; np ; np = np->sibling ) {
+ if ( IS_DIRECTORY( np->st_mode ) && np->child ) {
+ nodenum = WriteNodeAndSiblings( fd, nodenum, np->child );
+ }
+ }
+ return nodenum;
+}
+
+static void WriteNodeTable( int fd ) {
+ romfs_disk header;
+ int wnodes;
+
+ outputlong( (char*) &header.magic, ROMFS_MAGIC );
+ outputlong( (char*) &header.nodecount, nodes );
+ outputlong( (char*) &header.disksize, coffset );
+ outputlong( (char*) &header.dev_id, 0x01020304 );
+ strcpy( header.name, "ROMFS v1.0" );
+ if ( dowrite && write( fd, (void*)&header, sizeof(header) ) != sizeof(header) )
+ fatal_error(EXIT_WRITE, "Error writing ROMFS header: %s\n", strerror(errno) );
+
+ if ( (wnodes = WriteNodeAndSiblings( fd, 0, first )) != nodes ) {
+ fatal_error(EXIT_BUG, "BUG: Lost/gained some nodes; wrote %d, expected %d\n", wnodes, nodes );
+ }
+}
+
+#ifndef O_BINARY
+#define O_BINARY 0
+#endif
+
+static void WriteData( int fd, node *np ) {
+ char newpath[1024];
+ int ffd;
+ unsigned long todo;
+
+ if ( IS_SYMLINK( np->st_mode ) ) {
+ if ( (ffd = readlink( np->path, newpath, sizeof(newpath) )) < 0 )
+ fatal_error(EXIT_FILESYS, "Error reading symlink \"%s\": %s\n", np->path, strerror(errno) );
+
+ if ( !dowrite ) return;
+
+ if ( lseek( fd, np->offset, SEEK_SET ) != np->offset )
+ fatal_error(EXIT_SEEK, "Error seeking to offset 0x%lX: %s\n", np->offset, strerror(errno) );
+
+ if ( write( fd, newpath, ffd ) != ffd )
+ fatal_error(EXIT_WRITE, "Write error: %s\n", strerror(errno) );
+
+ return;
+ }
+
+ if ( (ffd=open(np->path, O_RDONLY | O_BINARY )) < 0 )
+ fatal_error(EXIT_FILESYS, "Error opening \"%s\": %s\n", np->path, strerror(errno) );
+
+ if ( dowrite && lseek( fd, np->offset, SEEK_SET ) != np->offset )
+ fatal_error(EXIT_SEEK, "Error seeking to offset 0x%lX: %s\n", np->offset, strerror(errno) );
+
+ todo = np->size;
+ while ( todo >= 1024 ) {
+ if ( read( ffd, newpath, 1024 ) != 1024 )
+ fatal_error(EXIT_FILESYS, "Error reading file \"%s\" at offset 0x%lX: %s\n", np->path, np->size - todo, strerror(errno) );
+ if ( dowrite && write( fd, newpath, 1024 ) != 1024 )
+ fatal_error(EXIT_WRITE, "Write error: %s\n", strerror(errno) );
+ todo -= 1024;
+ }
+
+ if ( todo ) {
+ if ( read( ffd, newpath, todo ) != todo )
+ fatal_error(EXIT_FILESYS, "Error reading file \"%s\" at offset 0x%lX: %s\n", np->path, np->size - todo, strerror(errno) );
+ if ( dowrite && write( fd, newpath, todo ) != todo )
+ fatal_error(EXIT_WRITE, "Write error: %s\n", strerror(errno) );
+ }
+
+ close(ffd);
+
+}
+
+static void WriteDataBlocks( int fd, node *first ) {
+ for ( ; first ; first = first->next_in_rom ) {
+ if ( dowrite && lseek( fd, first->offset, SEEK_SET ) != first->offset )
+ fatal_error(EXIT_SEEK, "Error seeking to offset 0x%lX: %s\n", first->offset, strerror(errno) );
+ if ( IS_DIRECTORY( first->st_mode ) ) {
+ if ( dowrite && write( fd, first->entry, first->size ) != first->size )
+ fatal_error(EXIT_WRITE, "Write error: %s\n", strerror(errno) );
+ } else {
+ WriteData( fd, first );
+ }
+ }
+}
+
+static void usage(void) {
+ fprintf(stderr,"\n%s - Create an eCos ROMFS disk image from the files\n",prog);
+ fprintf(stderr,"%*s contained under a specified directory\n\n", strlen(prog), "");
+ fprintf(stderr,"Usage: %s [options] \n", prog);
+ fprintf(stderr," fs_root is the directory containing the files to package into the ROMFS image\n");
+ fprintf(stderr," fs_file is the name of the ROMFS image file to create\n");
+ fprintf(stderr," Options include:\n");
+ fprintf(stderr," -v / -q increase / decrease verbosity\n");
+ fprintf(stderr," -n do everything EXCEPT creating the output file\n");
+ fprintf(stderr," -b write a big-endian image (default is little endian)\n");
+ fprintf(stderr," -l collapse hard links to a single node\n");
+ fprintf(stderr,"\n");
+ exit(EXIT_ARGS);
+}
+
+int main(int ac, char *av[]) {
+ int dummy;
+
+ prog = av[0];
+
+ // Check structure sizes
+ if (sizeof(romfs_node) != 32) {
+ fatal_error(EXIT_COMPILE , "Size of romfs_node is %d, NOT 32\n", sizeof(romfs_node) );
+ } else if (sizeof(romfs_dirent) != 8) {
+ fatal_error(EXIT_COMPILE , "Size of romfs_dirent is %d, NOT 8\n", sizeof(romfs_dirent) );
+ } else if (sizeof(romfs_disk) != 32) {
+ fatal_error(EXIT_COMPILE , "Size of romfs_disk is %d, NOT 32\n", sizeof(romfs_disk) );
+ }
+
+ // Parse option arguments
+ while ( ac > 1 && av[1][0] == '-' ) {
+ char *o = &av[1][1];
+ for ( ; *o ; o++ ) {
+ switch ( *o ) {
+ case 'q' :
+ verbose--;
+ break;
+ case 'v' :
+ verbose++;
+ break;
+ case 'n' :
+ dowrite = 0;
+ break;
+ case 'b' :
+ bigendian = 1;
+ break;
+ case 'l' :
+ hardlinks = 1;
+ break;
+ default :
+ fprintf(stderr,"%s: Invalid flag -%c\n", prog, *o );
+ usage();
+ }
+ }
+ av++; ac--;
+ }
+
+ // Check remaining arguments
+ if ( ac != 3 ) usage();
+
+
+ verb_printf( VERB_MINIMUM, "%s: Verbosity %d %s%s endian\n",
+ prog, verbose,
+ dowrite ? "" : "no write, ",
+ bigendian ? "big" : "little" );
+
+ // Phase 1. Recursively scan the root directory for files and directories.
+ verb_printf(VERB_MINIMUM, "Phase 1 - Build file list\n");
+
+ first = GetNodeInfo( av[1], ".", &dummy ); // Initialize the root node entry.
+ ScanDirectory( first, 0 );
+
+ // Phase 2. Work out space allocations for filesystem
+ verb_printf(VERB_MINIMUM, "Phase 2 - Calculate space allocation\n");
+ coffset = sizeof(romfs_disk) + nodes * sizeof(romfs_node);
+ verb_printf(VERB_MAX,"\t\tnode table : 0x000000 (+0x%05lX) %d nodes\n", coffset, nodes );
+
+ // Phase 2a. Work out space allocations for the directories of the filesystem
+ verb_printf(VERB_SUB,"Phase 2a - * Directories\n");
+ coffset = ALIGN_TO( coffset, DIRECTORY_ALIGN );
+ AllocateSpaceToDirectories( first );
+
+ // Phase 2b. Work out space allocations for the data files of the filesystem
+ verb_printf(VERB_SUB,"Phase 2b - * Regular files\n");
+ coffset = ALIGN_TO( coffset, DATA_ALIGN );
+ AllocateSpaceToDataFiles( first );
+
+ // Phase 2c. Work out space allocations for the executable files of the filesystem
+ verb_printf(VERB_SUB,"Phase 2c - * Executable files\n");
+ coffset = ALIGN_TO( coffset, EXEC_ALIGN );
+ AllocateSpaceToExecutables( first );
+
+ // Round off the image size...
+ coffset = ALIGN_TO( coffset, EXEC_ALIGN );
+
+ // Phase 3. Write out the image file
+ verb_printf(VERB_MINIMUM, "Phase 3 - Construct ROMFS image file (%ld kb)\n", ALIGN_TO( coffset, 1024 )/1024);
+
+ if ( dowrite ) {
+ if ( (fd = open( av[2], O_WRONLY|O_CREAT|O_TRUNC|O_BINARY, 0666 )) < 0 ) {
+ fatal_error(EXIT_WRITE,"Failed to open output file '%s', errno=%d\n", av[2], errno );
+ }
+ } else {
+ verb_printf(VERB_NONE," (No image is being written)\n");
+ }
+
+ verb_printf(VERB_SUB,"Phase 3a - * Node table\n");
+ WriteNodeTable( fd );
+
+ verb_printf(VERB_SUB,"Phase 3b - * Data blocks\n");
+ WriteDataBlocks( fd, first );
+
+ if ( fd >= 0 ) close(fd);
+
+ verb_printf(VERB_MINIMUM, "%s completed\n", av[2] );
+
+ return 0;
+}